1 /* 2 * Copyright (c) 2005-2011 Atheros Communications Inc. 3 * Copyright (c) 2011-2013 Qualcomm Atheros, Inc. 4 * 5 * Permission to use, copy, modify, and/or distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 */ 17 18 #ifndef _WMI_H_ 19 #define _WMI_H_ 20 21 #include <linux/types.h> 22 #include <net/mac80211.h> 23 24 /* 25 * This file specifies the WMI interface for the Unified Software 26 * Architecture. 27 * 28 * It includes definitions of all the commands and events. Commands are 29 * messages from the host to the target. Events and Replies are messages 30 * from the target to the host. 31 * 32 * Ownership of correctness in regards to WMI commands belongs to the host 33 * driver and the target is not required to validate parameters for value, 34 * proper range, or any other checking. 35 * 36 * Guidelines for extending this interface are below. 37 * 38 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff 39 * 40 * 2. Use ONLY u32 type for defining member variables within WMI 41 * command/event structures. Do not use u8, u16, bool or 42 * enum types within these structures. 43 * 44 * 3. DO NOT define bit fields within structures. Implement bit fields 45 * using masks if necessary. Do not use the programming language's bit 46 * field definition. 47 * 48 * 4. Define macros for encode/decode of u8, u16 fields within 49 * the u32 variables. Use these macros for set/get of these fields. 50 * Try to use this to optimize the structure without bloating it with 51 * u32 variables for every lower sized field. 52 * 53 * 5. Do not use PACK/UNPACK attributes for the structures as each member 54 * variable is already 4-byte aligned by virtue of being a u32 55 * type. 56 * 57 * 6. Comment each parameter part of the WMI command/event structure by 58 * using the 2 stars at the begining of C comment instead of one star to 59 * enable HTML document generation using Doxygen. 60 * 61 */ 62 63 /* Control Path */ 64 struct wmi_cmd_hdr { 65 __le32 cmd_id; 66 } __packed; 67 68 #define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF 69 #define WMI_CMD_HDR_CMD_ID_LSB 0 70 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000 71 #define WMI_CMD_HDR_PLT_PRIV_LSB 24 72 73 #define HTC_PROTOCOL_VERSION 0x0002 74 #define WMI_PROTOCOL_VERSION 0x0002 75 76 enum wmi_service_id { 77 WMI_SERVICE_BEACON_OFFLOAD = 0, /* beacon offload */ 78 WMI_SERVICE_SCAN_OFFLOAD, /* scan offload */ 79 WMI_SERVICE_ROAM_OFFLOAD, /* roam offload */ 80 WMI_SERVICE_BCN_MISS_OFFLOAD, /* beacon miss offload */ 81 WMI_SERVICE_STA_PWRSAVE, /* fake sleep + basic power save */ 82 WMI_SERVICE_STA_ADVANCED_PWRSAVE, /* uapsd, pspoll, force sleep */ 83 WMI_SERVICE_AP_UAPSD, /* uapsd on AP */ 84 WMI_SERVICE_AP_DFS, /* DFS on AP */ 85 WMI_SERVICE_11AC, /* supports 11ac */ 86 WMI_SERVICE_BLOCKACK, /* Supports triggering ADDBA/DELBA from host*/ 87 WMI_SERVICE_PHYERR, /* PHY error */ 88 WMI_SERVICE_BCN_FILTER, /* Beacon filter support */ 89 WMI_SERVICE_RTT, /* RTT (round trip time) support */ 90 WMI_SERVICE_RATECTRL, /* Rate-control */ 91 WMI_SERVICE_WOW, /* WOW Support */ 92 WMI_SERVICE_RATECTRL_CACHE, /* Rate-control caching */ 93 WMI_SERVICE_IRAM_TIDS, /* TIDs in IRAM */ 94 WMI_SERVICE_ARPNS_OFFLOAD, /* ARP NS Offload support */ 95 WMI_SERVICE_NLO, /* Network list offload service */ 96 WMI_SERVICE_GTK_OFFLOAD, /* GTK offload */ 97 WMI_SERVICE_SCAN_SCH, /* Scan Scheduler Service */ 98 WMI_SERVICE_CSA_OFFLOAD, /* CSA offload service */ 99 WMI_SERVICE_CHATTER, /* Chatter service */ 100 WMI_SERVICE_COEX_FREQAVOID, /* FW report freq range to avoid */ 101 WMI_SERVICE_PACKET_POWER_SAVE, /* packet power save service */ 102 WMI_SERVICE_FORCE_FW_HANG, /* To test fw recovery mechanism */ 103 WMI_SERVICE_GPIO, /* GPIO service */ 104 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, /* Modulated DTIM support */ 105 WMI_STA_UAPSD_BASIC_AUTO_TRIG, /* UAPSD AC Trigger Generation */ 106 WMI_STA_UAPSD_VAR_AUTO_TRIG, /* -do- */ 107 WMI_SERVICE_STA_KEEP_ALIVE, /* STA keep alive mechanism support */ 108 WMI_SERVICE_TX_ENCAP, /* Packet type for TX encapsulation */ 109 110 WMI_SERVICE_LAST, 111 WMI_MAX_SERVICE = 64 /* max service */ 112 }; 113 114 static inline char *wmi_service_name(int service_id) 115 { 116 switch (service_id) { 117 case WMI_SERVICE_BEACON_OFFLOAD: 118 return "BEACON_OFFLOAD"; 119 case WMI_SERVICE_SCAN_OFFLOAD: 120 return "SCAN_OFFLOAD"; 121 case WMI_SERVICE_ROAM_OFFLOAD: 122 return "ROAM_OFFLOAD"; 123 case WMI_SERVICE_BCN_MISS_OFFLOAD: 124 return "BCN_MISS_OFFLOAD"; 125 case WMI_SERVICE_STA_PWRSAVE: 126 return "STA_PWRSAVE"; 127 case WMI_SERVICE_STA_ADVANCED_PWRSAVE: 128 return "STA_ADVANCED_PWRSAVE"; 129 case WMI_SERVICE_AP_UAPSD: 130 return "AP_UAPSD"; 131 case WMI_SERVICE_AP_DFS: 132 return "AP_DFS"; 133 case WMI_SERVICE_11AC: 134 return "11AC"; 135 case WMI_SERVICE_BLOCKACK: 136 return "BLOCKACK"; 137 case WMI_SERVICE_PHYERR: 138 return "PHYERR"; 139 case WMI_SERVICE_BCN_FILTER: 140 return "BCN_FILTER"; 141 case WMI_SERVICE_RTT: 142 return "RTT"; 143 case WMI_SERVICE_RATECTRL: 144 return "RATECTRL"; 145 case WMI_SERVICE_WOW: 146 return "WOW"; 147 case WMI_SERVICE_RATECTRL_CACHE: 148 return "RATECTRL CACHE"; 149 case WMI_SERVICE_IRAM_TIDS: 150 return "IRAM TIDS"; 151 case WMI_SERVICE_ARPNS_OFFLOAD: 152 return "ARPNS_OFFLOAD"; 153 case WMI_SERVICE_NLO: 154 return "NLO"; 155 case WMI_SERVICE_GTK_OFFLOAD: 156 return "GTK_OFFLOAD"; 157 case WMI_SERVICE_SCAN_SCH: 158 return "SCAN_SCH"; 159 case WMI_SERVICE_CSA_OFFLOAD: 160 return "CSA_OFFLOAD"; 161 case WMI_SERVICE_CHATTER: 162 return "CHATTER"; 163 case WMI_SERVICE_COEX_FREQAVOID: 164 return "COEX_FREQAVOID"; 165 case WMI_SERVICE_PACKET_POWER_SAVE: 166 return "PACKET_POWER_SAVE"; 167 case WMI_SERVICE_FORCE_FW_HANG: 168 return "FORCE FW HANG"; 169 case WMI_SERVICE_GPIO: 170 return "GPIO"; 171 case WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM: 172 return "MODULATED DTIM"; 173 case WMI_STA_UAPSD_BASIC_AUTO_TRIG: 174 return "BASIC UAPSD"; 175 case WMI_STA_UAPSD_VAR_AUTO_TRIG: 176 return "VAR UAPSD"; 177 case WMI_SERVICE_STA_KEEP_ALIVE: 178 return "STA KEEP ALIVE"; 179 case WMI_SERVICE_TX_ENCAP: 180 return "TX ENCAP"; 181 default: 182 return "UNKNOWN SERVICE\n"; 183 } 184 } 185 186 187 #define WMI_SERVICE_BM_SIZE \ 188 ((WMI_MAX_SERVICE + sizeof(u32) - 1)/sizeof(u32)) 189 190 /* 2 word representation of MAC addr */ 191 struct wmi_mac_addr { 192 union { 193 u8 addr[6]; 194 struct { 195 u32 word0; 196 u32 word1; 197 } __packed; 198 } __packed; 199 } __packed; 200 201 /* macro to convert MAC address from WMI word format to char array */ 202 #define WMI_MAC_ADDR_TO_CHAR_ARRAY(pwmi_mac_addr, c_macaddr) do { \ 203 (c_macaddr)[0] = ((pwmi_mac_addr)->word0) & 0xff; \ 204 (c_macaddr)[1] = (((pwmi_mac_addr)->word0) >> 8) & 0xff; \ 205 (c_macaddr)[2] = (((pwmi_mac_addr)->word0) >> 16) & 0xff; \ 206 (c_macaddr)[3] = (((pwmi_mac_addr)->word0) >> 24) & 0xff; \ 207 (c_macaddr)[4] = ((pwmi_mac_addr)->word1) & 0xff; \ 208 (c_macaddr)[5] = (((pwmi_mac_addr)->word1) >> 8) & 0xff; \ 209 } while (0) 210 211 struct wmi_cmd_map { 212 u32 init_cmdid; 213 u32 start_scan_cmdid; 214 u32 stop_scan_cmdid; 215 u32 scan_chan_list_cmdid; 216 u32 scan_sch_prio_tbl_cmdid; 217 u32 pdev_set_regdomain_cmdid; 218 u32 pdev_set_channel_cmdid; 219 u32 pdev_set_param_cmdid; 220 u32 pdev_pktlog_enable_cmdid; 221 u32 pdev_pktlog_disable_cmdid; 222 u32 pdev_set_wmm_params_cmdid; 223 u32 pdev_set_ht_cap_ie_cmdid; 224 u32 pdev_set_vht_cap_ie_cmdid; 225 u32 pdev_set_dscp_tid_map_cmdid; 226 u32 pdev_set_quiet_mode_cmdid; 227 u32 pdev_green_ap_ps_enable_cmdid; 228 u32 pdev_get_tpc_config_cmdid; 229 u32 pdev_set_base_macaddr_cmdid; 230 u32 vdev_create_cmdid; 231 u32 vdev_delete_cmdid; 232 u32 vdev_start_request_cmdid; 233 u32 vdev_restart_request_cmdid; 234 u32 vdev_up_cmdid; 235 u32 vdev_stop_cmdid; 236 u32 vdev_down_cmdid; 237 u32 vdev_set_param_cmdid; 238 u32 vdev_install_key_cmdid; 239 u32 peer_create_cmdid; 240 u32 peer_delete_cmdid; 241 u32 peer_flush_tids_cmdid; 242 u32 peer_set_param_cmdid; 243 u32 peer_assoc_cmdid; 244 u32 peer_add_wds_entry_cmdid; 245 u32 peer_remove_wds_entry_cmdid; 246 u32 peer_mcast_group_cmdid; 247 u32 bcn_tx_cmdid; 248 u32 pdev_send_bcn_cmdid; 249 u32 bcn_tmpl_cmdid; 250 u32 bcn_filter_rx_cmdid; 251 u32 prb_req_filter_rx_cmdid; 252 u32 mgmt_tx_cmdid; 253 u32 prb_tmpl_cmdid; 254 u32 addba_clear_resp_cmdid; 255 u32 addba_send_cmdid; 256 u32 addba_status_cmdid; 257 u32 delba_send_cmdid; 258 u32 addba_set_resp_cmdid; 259 u32 send_singleamsdu_cmdid; 260 u32 sta_powersave_mode_cmdid; 261 u32 sta_powersave_param_cmdid; 262 u32 sta_mimo_ps_mode_cmdid; 263 u32 pdev_dfs_enable_cmdid; 264 u32 pdev_dfs_disable_cmdid; 265 u32 roam_scan_mode; 266 u32 roam_scan_rssi_threshold; 267 u32 roam_scan_period; 268 u32 roam_scan_rssi_change_threshold; 269 u32 roam_ap_profile; 270 u32 ofl_scan_add_ap_profile; 271 u32 ofl_scan_remove_ap_profile; 272 u32 ofl_scan_period; 273 u32 p2p_dev_set_device_info; 274 u32 p2p_dev_set_discoverability; 275 u32 p2p_go_set_beacon_ie; 276 u32 p2p_go_set_probe_resp_ie; 277 u32 p2p_set_vendor_ie_data_cmdid; 278 u32 ap_ps_peer_param_cmdid; 279 u32 ap_ps_peer_uapsd_coex_cmdid; 280 u32 peer_rate_retry_sched_cmdid; 281 u32 wlan_profile_trigger_cmdid; 282 u32 wlan_profile_set_hist_intvl_cmdid; 283 u32 wlan_profile_get_profile_data_cmdid; 284 u32 wlan_profile_enable_profile_id_cmdid; 285 u32 wlan_profile_list_profile_id_cmdid; 286 u32 pdev_suspend_cmdid; 287 u32 pdev_resume_cmdid; 288 u32 add_bcn_filter_cmdid; 289 u32 rmv_bcn_filter_cmdid; 290 u32 wow_add_wake_pattern_cmdid; 291 u32 wow_del_wake_pattern_cmdid; 292 u32 wow_enable_disable_wake_event_cmdid; 293 u32 wow_enable_cmdid; 294 u32 wow_hostwakeup_from_sleep_cmdid; 295 u32 rtt_measreq_cmdid; 296 u32 rtt_tsf_cmdid; 297 u32 vdev_spectral_scan_configure_cmdid; 298 u32 vdev_spectral_scan_enable_cmdid; 299 u32 request_stats_cmdid; 300 u32 set_arp_ns_offload_cmdid; 301 u32 network_list_offload_config_cmdid; 302 u32 gtk_offload_cmdid; 303 u32 csa_offload_enable_cmdid; 304 u32 csa_offload_chanswitch_cmdid; 305 u32 chatter_set_mode_cmdid; 306 u32 peer_tid_addba_cmdid; 307 u32 peer_tid_delba_cmdid; 308 u32 sta_dtim_ps_method_cmdid; 309 u32 sta_uapsd_auto_trig_cmdid; 310 u32 sta_keepalive_cmd; 311 u32 echo_cmdid; 312 u32 pdev_utf_cmdid; 313 u32 dbglog_cfg_cmdid; 314 u32 pdev_qvit_cmdid; 315 u32 pdev_ftm_intg_cmdid; 316 u32 vdev_set_keepalive_cmdid; 317 u32 vdev_get_keepalive_cmdid; 318 u32 force_fw_hang_cmdid; 319 u32 gpio_config_cmdid; 320 u32 gpio_output_cmdid; 321 }; 322 323 /* 324 * wmi command groups. 325 */ 326 enum wmi_cmd_group { 327 /* 0 to 2 are reserved */ 328 WMI_GRP_START = 0x3, 329 WMI_GRP_SCAN = WMI_GRP_START, 330 WMI_GRP_PDEV, 331 WMI_GRP_VDEV, 332 WMI_GRP_PEER, 333 WMI_GRP_MGMT, 334 WMI_GRP_BA_NEG, 335 WMI_GRP_STA_PS, 336 WMI_GRP_DFS, 337 WMI_GRP_ROAM, 338 WMI_GRP_OFL_SCAN, 339 WMI_GRP_P2P, 340 WMI_GRP_AP_PS, 341 WMI_GRP_RATE_CTRL, 342 WMI_GRP_PROFILE, 343 WMI_GRP_SUSPEND, 344 WMI_GRP_BCN_FILTER, 345 WMI_GRP_WOW, 346 WMI_GRP_RTT, 347 WMI_GRP_SPECTRAL, 348 WMI_GRP_STATS, 349 WMI_GRP_ARP_NS_OFL, 350 WMI_GRP_NLO_OFL, 351 WMI_GRP_GTK_OFL, 352 WMI_GRP_CSA_OFL, 353 WMI_GRP_CHATTER, 354 WMI_GRP_TID_ADDBA, 355 WMI_GRP_MISC, 356 WMI_GRP_GPIO, 357 }; 358 359 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1) 360 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1) 361 362 #define WMI_CMD_UNSUPPORTED 0 363 364 /* Command IDs and command events for MAIN FW. */ 365 enum wmi_cmd_id { 366 WMI_INIT_CMDID = 0x1, 367 368 /* Scan specific commands */ 369 WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN), 370 WMI_STOP_SCAN_CMDID, 371 WMI_SCAN_CHAN_LIST_CMDID, 372 WMI_SCAN_SCH_PRIO_TBL_CMDID, 373 374 /* PDEV (physical device) specific commands */ 375 WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV), 376 WMI_PDEV_SET_CHANNEL_CMDID, 377 WMI_PDEV_SET_PARAM_CMDID, 378 WMI_PDEV_PKTLOG_ENABLE_CMDID, 379 WMI_PDEV_PKTLOG_DISABLE_CMDID, 380 WMI_PDEV_SET_WMM_PARAMS_CMDID, 381 WMI_PDEV_SET_HT_CAP_IE_CMDID, 382 WMI_PDEV_SET_VHT_CAP_IE_CMDID, 383 WMI_PDEV_SET_DSCP_TID_MAP_CMDID, 384 WMI_PDEV_SET_QUIET_MODE_CMDID, 385 WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID, 386 WMI_PDEV_GET_TPC_CONFIG_CMDID, 387 WMI_PDEV_SET_BASE_MACADDR_CMDID, 388 389 /* VDEV (virtual device) specific commands */ 390 WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV), 391 WMI_VDEV_DELETE_CMDID, 392 WMI_VDEV_START_REQUEST_CMDID, 393 WMI_VDEV_RESTART_REQUEST_CMDID, 394 WMI_VDEV_UP_CMDID, 395 WMI_VDEV_STOP_CMDID, 396 WMI_VDEV_DOWN_CMDID, 397 WMI_VDEV_SET_PARAM_CMDID, 398 WMI_VDEV_INSTALL_KEY_CMDID, 399 400 /* peer specific commands */ 401 WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER), 402 WMI_PEER_DELETE_CMDID, 403 WMI_PEER_FLUSH_TIDS_CMDID, 404 WMI_PEER_SET_PARAM_CMDID, 405 WMI_PEER_ASSOC_CMDID, 406 WMI_PEER_ADD_WDS_ENTRY_CMDID, 407 WMI_PEER_REMOVE_WDS_ENTRY_CMDID, 408 WMI_PEER_MCAST_GROUP_CMDID, 409 410 /* beacon/management specific commands */ 411 WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT), 412 WMI_PDEV_SEND_BCN_CMDID, 413 WMI_BCN_TMPL_CMDID, 414 WMI_BCN_FILTER_RX_CMDID, 415 WMI_PRB_REQ_FILTER_RX_CMDID, 416 WMI_MGMT_TX_CMDID, 417 WMI_PRB_TMPL_CMDID, 418 419 /* commands to directly control BA negotiation directly from host. */ 420 WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG), 421 WMI_ADDBA_SEND_CMDID, 422 WMI_ADDBA_STATUS_CMDID, 423 WMI_DELBA_SEND_CMDID, 424 WMI_ADDBA_SET_RESP_CMDID, 425 WMI_SEND_SINGLEAMSDU_CMDID, 426 427 /* Station power save specific config */ 428 WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS), 429 WMI_STA_POWERSAVE_PARAM_CMDID, 430 WMI_STA_MIMO_PS_MODE_CMDID, 431 432 /** DFS-specific commands */ 433 WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS), 434 WMI_PDEV_DFS_DISABLE_CMDID, 435 436 /* Roaming specific commands */ 437 WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM), 438 WMI_ROAM_SCAN_RSSI_THRESHOLD, 439 WMI_ROAM_SCAN_PERIOD, 440 WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 441 WMI_ROAM_AP_PROFILE, 442 443 /* offload scan specific commands */ 444 WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN), 445 WMI_OFL_SCAN_REMOVE_AP_PROFILE, 446 WMI_OFL_SCAN_PERIOD, 447 448 /* P2P specific commands */ 449 WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P), 450 WMI_P2P_DEV_SET_DISCOVERABILITY, 451 WMI_P2P_GO_SET_BEACON_IE, 452 WMI_P2P_GO_SET_PROBE_RESP_IE, 453 WMI_P2P_SET_VENDOR_IE_DATA_CMDID, 454 455 /* AP power save specific config */ 456 WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS), 457 WMI_AP_PS_PEER_UAPSD_COEX_CMDID, 458 459 /* Rate-control specific commands */ 460 WMI_PEER_RATE_RETRY_SCHED_CMDID = 461 WMI_CMD_GRP(WMI_GRP_RATE_CTRL), 462 463 /* WLAN Profiling commands. */ 464 WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE), 465 WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 466 WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 467 WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 468 WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 469 470 /* Suspend resume command Ids */ 471 WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND), 472 WMI_PDEV_RESUME_CMDID, 473 474 /* Beacon filter commands */ 475 WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER), 476 WMI_RMV_BCN_FILTER_CMDID, 477 478 /* WOW Specific WMI commands*/ 479 WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW), 480 WMI_WOW_DEL_WAKE_PATTERN_CMDID, 481 WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 482 WMI_WOW_ENABLE_CMDID, 483 WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 484 485 /* RTT measurement related cmd */ 486 WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT), 487 WMI_RTT_TSF_CMDID, 488 489 /* spectral scan commands */ 490 WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL), 491 WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 492 493 /* F/W stats */ 494 WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS), 495 496 /* ARP OFFLOAD REQUEST*/ 497 WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL), 498 499 /* NS offload confid*/ 500 WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL), 501 502 /* GTK offload Specific WMI commands*/ 503 WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL), 504 505 /* CSA offload Specific WMI commands*/ 506 WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL), 507 WMI_CSA_OFFLOAD_CHANSWITCH_CMDID, 508 509 /* Chatter commands*/ 510 WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER), 511 512 /* addba specific commands */ 513 WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA), 514 WMI_PEER_TID_DELBA_CMDID, 515 516 /* set station mimo powersave method */ 517 WMI_STA_DTIM_PS_METHOD_CMDID, 518 /* Configure the Station UAPSD AC Auto Trigger Parameters */ 519 WMI_STA_UAPSD_AUTO_TRIG_CMDID, 520 521 /* STA Keep alive parameter configuration, 522 Requires WMI_SERVICE_STA_KEEP_ALIVE */ 523 WMI_STA_KEEPALIVE_CMD, 524 525 /* misc command group */ 526 WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC), 527 WMI_PDEV_UTF_CMDID, 528 WMI_DBGLOG_CFG_CMDID, 529 WMI_PDEV_QVIT_CMDID, 530 WMI_PDEV_FTM_INTG_CMDID, 531 WMI_VDEV_SET_KEEPALIVE_CMDID, 532 WMI_VDEV_GET_KEEPALIVE_CMDID, 533 WMI_FORCE_FW_HANG_CMDID, 534 535 /* GPIO Configuration */ 536 WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO), 537 WMI_GPIO_OUTPUT_CMDID, 538 }; 539 540 enum wmi_event_id { 541 WMI_SERVICE_READY_EVENTID = 0x1, 542 WMI_READY_EVENTID, 543 544 /* Scan specific events */ 545 WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN), 546 547 /* PDEV specific events */ 548 WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV), 549 WMI_CHAN_INFO_EVENTID, 550 WMI_PHYERR_EVENTID, 551 552 /* VDEV specific events */ 553 WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV), 554 WMI_VDEV_STOPPED_EVENTID, 555 WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID, 556 557 /* peer specific events */ 558 WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER), 559 560 /* beacon/mgmt specific events */ 561 WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT), 562 WMI_HOST_SWBA_EVENTID, 563 WMI_TBTTOFFSET_UPDATE_EVENTID, 564 565 /* ADDBA Related WMI Events*/ 566 WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG), 567 WMI_TX_ADDBA_COMPLETE_EVENTID, 568 569 /* Roam event to trigger roaming on host */ 570 WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM), 571 WMI_PROFILE_MATCH, 572 573 /* WoW */ 574 WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW), 575 576 /* RTT */ 577 WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT), 578 WMI_TSF_MEASUREMENT_REPORT_EVENTID, 579 WMI_RTT_ERROR_REPORT_EVENTID, 580 581 /* GTK offload */ 582 WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL), 583 WMI_GTK_REKEY_FAIL_EVENTID, 584 585 /* CSA IE received event */ 586 WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL), 587 588 /* Misc events */ 589 WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC), 590 WMI_PDEV_UTF_EVENTID, 591 WMI_DEBUG_MESG_EVENTID, 592 WMI_UPDATE_STATS_EVENTID, 593 WMI_DEBUG_PRINT_EVENTID, 594 WMI_DCS_INTERFERENCE_EVENTID, 595 WMI_PDEV_QVIT_EVENTID, 596 WMI_WLAN_PROFILE_DATA_EVENTID, 597 WMI_PDEV_FTM_INTG_EVENTID, 598 WMI_WLAN_FREQ_AVOID_EVENTID, 599 WMI_VDEV_GET_KEEPALIVE_EVENTID, 600 601 /* GPIO Event */ 602 WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO), 603 }; 604 605 /* Command IDs and command events for 10.X firmware */ 606 enum wmi_10x_cmd_id { 607 WMI_10X_START_CMDID = 0x9000, 608 WMI_10X_END_CMDID = 0x9FFF, 609 610 /* initialize the wlan sub system */ 611 WMI_10X_INIT_CMDID, 612 613 /* Scan specific commands */ 614 615 WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID, 616 WMI_10X_STOP_SCAN_CMDID, 617 WMI_10X_SCAN_CHAN_LIST_CMDID, 618 WMI_10X_ECHO_CMDID, 619 620 /* PDEV(physical device) specific commands */ 621 WMI_10X_PDEV_SET_REGDOMAIN_CMDID, 622 WMI_10X_PDEV_SET_CHANNEL_CMDID, 623 WMI_10X_PDEV_SET_PARAM_CMDID, 624 WMI_10X_PDEV_PKTLOG_ENABLE_CMDID, 625 WMI_10X_PDEV_PKTLOG_DISABLE_CMDID, 626 WMI_10X_PDEV_SET_WMM_PARAMS_CMDID, 627 WMI_10X_PDEV_SET_HT_CAP_IE_CMDID, 628 WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID, 629 WMI_10X_PDEV_SET_BASE_MACADDR_CMDID, 630 WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID, 631 WMI_10X_PDEV_SET_QUIET_MODE_CMDID, 632 WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID, 633 WMI_10X_PDEV_GET_TPC_CONFIG_CMDID, 634 635 /* VDEV(virtual device) specific commands */ 636 WMI_10X_VDEV_CREATE_CMDID, 637 WMI_10X_VDEV_DELETE_CMDID, 638 WMI_10X_VDEV_START_REQUEST_CMDID, 639 WMI_10X_VDEV_RESTART_REQUEST_CMDID, 640 WMI_10X_VDEV_UP_CMDID, 641 WMI_10X_VDEV_STOP_CMDID, 642 WMI_10X_VDEV_DOWN_CMDID, 643 WMI_10X_VDEV_STANDBY_RESPONSE_CMDID, 644 WMI_10X_VDEV_RESUME_RESPONSE_CMDID, 645 WMI_10X_VDEV_SET_PARAM_CMDID, 646 WMI_10X_VDEV_INSTALL_KEY_CMDID, 647 648 /* peer specific commands */ 649 WMI_10X_PEER_CREATE_CMDID, 650 WMI_10X_PEER_DELETE_CMDID, 651 WMI_10X_PEER_FLUSH_TIDS_CMDID, 652 WMI_10X_PEER_SET_PARAM_CMDID, 653 WMI_10X_PEER_ASSOC_CMDID, 654 WMI_10X_PEER_ADD_WDS_ENTRY_CMDID, 655 WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID, 656 WMI_10X_PEER_MCAST_GROUP_CMDID, 657 658 /* beacon/management specific commands */ 659 660 WMI_10X_BCN_TX_CMDID, 661 WMI_10X_BCN_PRB_TMPL_CMDID, 662 WMI_10X_BCN_FILTER_RX_CMDID, 663 WMI_10X_PRB_REQ_FILTER_RX_CMDID, 664 WMI_10X_MGMT_TX_CMDID, 665 666 /* commands to directly control ba negotiation directly from host. */ 667 WMI_10X_ADDBA_CLEAR_RESP_CMDID, 668 WMI_10X_ADDBA_SEND_CMDID, 669 WMI_10X_ADDBA_STATUS_CMDID, 670 WMI_10X_DELBA_SEND_CMDID, 671 WMI_10X_ADDBA_SET_RESP_CMDID, 672 WMI_10X_SEND_SINGLEAMSDU_CMDID, 673 674 /* Station power save specific config */ 675 WMI_10X_STA_POWERSAVE_MODE_CMDID, 676 WMI_10X_STA_POWERSAVE_PARAM_CMDID, 677 WMI_10X_STA_MIMO_PS_MODE_CMDID, 678 679 /* set debug log config */ 680 WMI_10X_DBGLOG_CFG_CMDID, 681 682 /* DFS-specific commands */ 683 WMI_10X_PDEV_DFS_ENABLE_CMDID, 684 WMI_10X_PDEV_DFS_DISABLE_CMDID, 685 686 /* QVIT specific command id */ 687 WMI_10X_PDEV_QVIT_CMDID, 688 689 /* Offload Scan and Roaming related commands */ 690 WMI_10X_ROAM_SCAN_MODE, 691 WMI_10X_ROAM_SCAN_RSSI_THRESHOLD, 692 WMI_10X_ROAM_SCAN_PERIOD, 693 WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 694 WMI_10X_ROAM_AP_PROFILE, 695 WMI_10X_OFL_SCAN_ADD_AP_PROFILE, 696 WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE, 697 WMI_10X_OFL_SCAN_PERIOD, 698 699 /* P2P specific commands */ 700 WMI_10X_P2P_DEV_SET_DEVICE_INFO, 701 WMI_10X_P2P_DEV_SET_DISCOVERABILITY, 702 WMI_10X_P2P_GO_SET_BEACON_IE, 703 WMI_10X_P2P_GO_SET_PROBE_RESP_IE, 704 705 /* AP power save specific config */ 706 WMI_10X_AP_PS_PEER_PARAM_CMDID, 707 WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID, 708 709 /* Rate-control specific commands */ 710 WMI_10X_PEER_RATE_RETRY_SCHED_CMDID, 711 712 /* WLAN Profiling commands. */ 713 WMI_10X_WLAN_PROFILE_TRIGGER_CMDID, 714 WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 715 WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 716 WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 717 WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 718 719 /* Suspend resume command Ids */ 720 WMI_10X_PDEV_SUSPEND_CMDID, 721 WMI_10X_PDEV_RESUME_CMDID, 722 723 /* Beacon filter commands */ 724 WMI_10X_ADD_BCN_FILTER_CMDID, 725 WMI_10X_RMV_BCN_FILTER_CMDID, 726 727 /* WOW Specific WMI commands*/ 728 WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID, 729 WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID, 730 WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 731 WMI_10X_WOW_ENABLE_CMDID, 732 WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 733 734 /* RTT measurement related cmd */ 735 WMI_10X_RTT_MEASREQ_CMDID, 736 WMI_10X_RTT_TSF_CMDID, 737 738 /* transmit beacon by value */ 739 WMI_10X_PDEV_SEND_BCN_CMDID, 740 741 /* F/W stats */ 742 WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 743 WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 744 WMI_10X_REQUEST_STATS_CMDID, 745 746 /* GPIO Configuration */ 747 WMI_10X_GPIO_CONFIG_CMDID, 748 WMI_10X_GPIO_OUTPUT_CMDID, 749 750 WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1, 751 }; 752 753 enum wmi_10x_event_id { 754 WMI_10X_SERVICE_READY_EVENTID = 0x8000, 755 WMI_10X_READY_EVENTID, 756 WMI_10X_START_EVENTID = 0x9000, 757 WMI_10X_END_EVENTID = 0x9FFF, 758 759 /* Scan specific events */ 760 WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID, 761 WMI_10X_ECHO_EVENTID, 762 WMI_10X_DEBUG_MESG_EVENTID, 763 WMI_10X_UPDATE_STATS_EVENTID, 764 765 /* Instantaneous RSSI event */ 766 WMI_10X_INST_RSSI_STATS_EVENTID, 767 768 /* VDEV specific events */ 769 WMI_10X_VDEV_START_RESP_EVENTID, 770 WMI_10X_VDEV_STANDBY_REQ_EVENTID, 771 WMI_10X_VDEV_RESUME_REQ_EVENTID, 772 WMI_10X_VDEV_STOPPED_EVENTID, 773 774 /* peer specific events */ 775 WMI_10X_PEER_STA_KICKOUT_EVENTID, 776 777 /* beacon/mgmt specific events */ 778 WMI_10X_HOST_SWBA_EVENTID, 779 WMI_10X_TBTTOFFSET_UPDATE_EVENTID, 780 WMI_10X_MGMT_RX_EVENTID, 781 782 /* Channel stats event */ 783 WMI_10X_CHAN_INFO_EVENTID, 784 785 /* PHY Error specific WMI event */ 786 WMI_10X_PHYERR_EVENTID, 787 788 /* Roam event to trigger roaming on host */ 789 WMI_10X_ROAM_EVENTID, 790 791 /* matching AP found from list of profiles */ 792 WMI_10X_PROFILE_MATCH, 793 794 /* debug print message used for tracing FW code while debugging */ 795 WMI_10X_DEBUG_PRINT_EVENTID, 796 /* VI spoecific event */ 797 WMI_10X_PDEV_QVIT_EVENTID, 798 /* FW code profile data in response to profile request */ 799 WMI_10X_WLAN_PROFILE_DATA_EVENTID, 800 801 /*RTT related event ID*/ 802 WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID, 803 WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID, 804 WMI_10X_RTT_ERROR_REPORT_EVENTID, 805 806 WMI_10X_WOW_WAKEUP_HOST_EVENTID, 807 WMI_10X_DCS_INTERFERENCE_EVENTID, 808 809 /* TPC config for the current operating channel */ 810 WMI_10X_PDEV_TPC_CONFIG_EVENTID, 811 812 WMI_10X_GPIO_INPUT_EVENTID, 813 WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID-1, 814 }; 815 816 enum wmi_phy_mode { 817 MODE_11A = 0, /* 11a Mode */ 818 MODE_11G = 1, /* 11b/g Mode */ 819 MODE_11B = 2, /* 11b Mode */ 820 MODE_11GONLY = 3, /* 11g only Mode */ 821 MODE_11NA_HT20 = 4, /* 11a HT20 mode */ 822 MODE_11NG_HT20 = 5, /* 11g HT20 mode */ 823 MODE_11NA_HT40 = 6, /* 11a HT40 mode */ 824 MODE_11NG_HT40 = 7, /* 11g HT40 mode */ 825 MODE_11AC_VHT20 = 8, 826 MODE_11AC_VHT40 = 9, 827 MODE_11AC_VHT80 = 10, 828 /* MODE_11AC_VHT160 = 11, */ 829 MODE_11AC_VHT20_2G = 11, 830 MODE_11AC_VHT40_2G = 12, 831 MODE_11AC_VHT80_2G = 13, 832 MODE_UNKNOWN = 14, 833 MODE_MAX = 14 834 }; 835 836 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode) 837 { 838 switch (mode) { 839 case MODE_11A: 840 return "11a"; 841 case MODE_11G: 842 return "11g"; 843 case MODE_11B: 844 return "11b"; 845 case MODE_11GONLY: 846 return "11gonly"; 847 case MODE_11NA_HT20: 848 return "11na-ht20"; 849 case MODE_11NG_HT20: 850 return "11ng-ht20"; 851 case MODE_11NA_HT40: 852 return "11na-ht40"; 853 case MODE_11NG_HT40: 854 return "11ng-ht40"; 855 case MODE_11AC_VHT20: 856 return "11ac-vht20"; 857 case MODE_11AC_VHT40: 858 return "11ac-vht40"; 859 case MODE_11AC_VHT80: 860 return "11ac-vht80"; 861 case MODE_11AC_VHT20_2G: 862 return "11ac-vht20-2g"; 863 case MODE_11AC_VHT40_2G: 864 return "11ac-vht40-2g"; 865 case MODE_11AC_VHT80_2G: 866 return "11ac-vht80-2g"; 867 case MODE_UNKNOWN: 868 /* skip */ 869 break; 870 871 /* no default handler to allow compiler to check that the 872 * enum is fully handled */ 873 }; 874 875 return "<unknown>"; 876 } 877 878 #define WMI_CHAN_LIST_TAG 0x1 879 #define WMI_SSID_LIST_TAG 0x2 880 #define WMI_BSSID_LIST_TAG 0x3 881 #define WMI_IE_TAG 0x4 882 883 struct wmi_channel { 884 __le32 mhz; 885 __le32 band_center_freq1; 886 __le32 band_center_freq2; /* valid for 11ac, 80plus80 */ 887 union { 888 __le32 flags; /* WMI_CHAN_FLAG_ */ 889 struct { 890 u8 mode; /* only 6 LSBs */ 891 } __packed; 892 } __packed; 893 union { 894 __le32 reginfo0; 895 struct { 896 /* note: power unit is 0.5 dBm */ 897 u8 min_power; 898 u8 max_power; 899 u8 reg_power; 900 u8 reg_classid; 901 } __packed; 902 } __packed; 903 union { 904 __le32 reginfo1; 905 struct { 906 u8 antenna_max; 907 } __packed; 908 } __packed; 909 } __packed; 910 911 struct wmi_channel_arg { 912 u32 freq; 913 u32 band_center_freq1; 914 bool passive; 915 bool allow_ibss; 916 bool allow_ht; 917 bool allow_vht; 918 bool ht40plus; 919 bool chan_radar; 920 /* note: power unit is 0.5 dBm */ 921 u32 min_power; 922 u32 max_power; 923 u32 max_reg_power; 924 u32 max_antenna_gain; 925 u32 reg_class_id; 926 enum wmi_phy_mode mode; 927 }; 928 929 enum wmi_channel_change_cause { 930 WMI_CHANNEL_CHANGE_CAUSE_NONE = 0, 931 WMI_CHANNEL_CHANGE_CAUSE_CSA, 932 }; 933 934 #define WMI_CHAN_FLAG_HT40_PLUS (1 << 6) 935 #define WMI_CHAN_FLAG_PASSIVE (1 << 7) 936 #define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8) 937 #define WMI_CHAN_FLAG_AP_DISABLED (1 << 9) 938 #define WMI_CHAN_FLAG_DFS (1 << 10) 939 #define WMI_CHAN_FLAG_ALLOW_HT (1 << 11) 940 #define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12) 941 942 /* Indicate reason for channel switch */ 943 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13) 944 945 #define WMI_MAX_SPATIAL_STREAM 3 946 947 /* HT Capabilities*/ 948 #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ 949 #define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */ 950 #define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ 951 #define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ 952 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3 953 #define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ 954 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4 955 #define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */ 956 #define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ 957 #define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ 958 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 959 #define WMI_HT_CAP_HT40_SGI 0x0800 960 961 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \ 962 WMI_HT_CAP_HT20_SGI | \ 963 WMI_HT_CAP_HT40_SGI | \ 964 WMI_HT_CAP_TX_STBC | \ 965 WMI_HT_CAP_RX_STBC | \ 966 WMI_HT_CAP_LDPC) 967 968 969 /* 970 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information 971 * field. The fields not defined here are not supported, or reserved. 972 * Do not change these masks and if you have to add new one follow the 973 * bitmask as specified by 802.11ac draft. 974 */ 975 976 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 977 #define WMI_VHT_CAP_RX_LDPC 0x00000010 978 #define WMI_VHT_CAP_SGI_80MHZ 0x00000020 979 #define WMI_VHT_CAP_TX_STBC 0x00000080 980 #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300 981 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8 982 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 983 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23 984 #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000 985 #define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000 986 987 /* The following also refer for max HT AMSDU */ 988 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000 989 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001 990 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 991 992 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \ 993 WMI_VHT_CAP_RX_LDPC | \ 994 WMI_VHT_CAP_SGI_80MHZ | \ 995 WMI_VHT_CAP_TX_STBC | \ 996 WMI_VHT_CAP_RX_STBC_MASK | \ 997 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \ 998 WMI_VHT_CAP_RX_FIXED_ANT | \ 999 WMI_VHT_CAP_TX_FIXED_ANT) 1000 1001 /* 1002 * Interested readers refer to Rx/Tx MCS Map definition as defined in 1003 * 802.11ac 1004 */ 1005 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) 1006 #define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 1007 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 1008 1009 enum { 1010 REGDMN_MODE_11A = 0x00001, /* 11a channels */ 1011 REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */ 1012 REGDMN_MODE_11B = 0x00004, /* 11b channels */ 1013 REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */ 1014 REGDMN_MODE_11G = 0x00008, /* XXX historical */ 1015 REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */ 1016 REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */ 1017 REGDMN_MODE_XR = 0x00100, /* XR channels */ 1018 REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */ 1019 REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */ 1020 REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */ 1021 REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */ 1022 REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */ 1023 REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */ 1024 REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */ 1025 REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */ 1026 REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */ 1027 REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */ 1028 REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */ 1029 REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */ 1030 REGDMN_MODE_ALL = 0xffffffff 1031 }; 1032 1033 #define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001 1034 #define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002 1035 #define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004 1036 1037 /* regulatory capabilities */ 1038 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040 1039 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080 1040 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100 1041 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200 1042 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400 1043 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800 1044 1045 struct hal_reg_capabilities { 1046 /* regdomain value specified in EEPROM */ 1047 __le32 eeprom_rd; 1048 /*regdomain */ 1049 __le32 eeprom_rd_ext; 1050 /* CAP1 capabilities bit map. */ 1051 __le32 regcap1; 1052 /* REGDMN EEPROM CAP. */ 1053 __le32 regcap2; 1054 /* REGDMN MODE */ 1055 __le32 wireless_modes; 1056 __le32 low_2ghz_chan; 1057 __le32 high_2ghz_chan; 1058 __le32 low_5ghz_chan; 1059 __le32 high_5ghz_chan; 1060 } __packed; 1061 1062 enum wlan_mode_capability { 1063 WHAL_WLAN_11A_CAPABILITY = 0x1, 1064 WHAL_WLAN_11G_CAPABILITY = 0x2, 1065 WHAL_WLAN_11AG_CAPABILITY = 0x3, 1066 }; 1067 1068 /* structure used by FW for requesting host memory */ 1069 struct wlan_host_mem_req { 1070 /* ID of the request */ 1071 __le32 req_id; 1072 /* size of the of each unit */ 1073 __le32 unit_size; 1074 /* flags to indicate that 1075 * the number units is dependent 1076 * on number of resources(num vdevs num peers .. etc) 1077 */ 1078 __le32 num_unit_info; 1079 /* 1080 * actual number of units to allocate . if flags in the num_unit_info 1081 * indicate that number of units is tied to number of a particular 1082 * resource to allocate then num_units filed is set to 0 and host 1083 * will derive the number units from number of the resources it is 1084 * requesting. 1085 */ 1086 __le32 num_units; 1087 } __packed; 1088 1089 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id) \ 1090 ((((wmi_svc_bmap)[(svc_id)/(sizeof(u32))]) & \ 1091 (1 << ((svc_id)%(sizeof(u32))))) != 0) 1092 1093 /* 1094 * The following struct holds optional payload for 1095 * wmi_service_ready_event,e.g., 11ac pass some of the 1096 * device capability to the host. 1097 */ 1098 struct wmi_service_ready_event { 1099 __le32 sw_version; 1100 __le32 sw_version_1; 1101 __le32 abi_version; 1102 /* WMI_PHY_CAPABILITY */ 1103 __le32 phy_capability; 1104 /* Maximum number of frag table entries that SW will populate less 1 */ 1105 __le32 max_frag_entry; 1106 __le32 wmi_service_bitmap[WMI_SERVICE_BM_SIZE]; 1107 __le32 num_rf_chains; 1108 /* 1109 * The following field is only valid for service type 1110 * WMI_SERVICE_11AC 1111 */ 1112 __le32 ht_cap_info; /* WMI HT Capability */ 1113 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 1114 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 1115 __le32 hw_min_tx_power; 1116 __le32 hw_max_tx_power; 1117 struct hal_reg_capabilities hal_reg_capabilities; 1118 __le32 sys_cap_info; 1119 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 1120 /* 1121 * Max beacon and Probe Response IE offload size 1122 * (includes optional P2P IEs) 1123 */ 1124 __le32 max_bcn_ie_size; 1125 /* 1126 * request to host to allocate a chuck of memory and pss it down to FW 1127 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 1128 * data structures. Only valid for low latency interfaces like PCIE 1129 * where FW can access this memory directly (or) by DMA. 1130 */ 1131 __le32 num_mem_reqs; 1132 struct wlan_host_mem_req mem_reqs[1]; 1133 } __packed; 1134 1135 /* This is the definition from 10.X firmware branch */ 1136 struct wmi_service_ready_event_10x { 1137 __le32 sw_version; 1138 __le32 abi_version; 1139 1140 /* WMI_PHY_CAPABILITY */ 1141 __le32 phy_capability; 1142 1143 /* Maximum number of frag table entries that SW will populate less 1 */ 1144 __le32 max_frag_entry; 1145 __le32 wmi_service_bitmap[WMI_SERVICE_BM_SIZE]; 1146 __le32 num_rf_chains; 1147 1148 /* 1149 * The following field is only valid for service type 1150 * WMI_SERVICE_11AC 1151 */ 1152 __le32 ht_cap_info; /* WMI HT Capability */ 1153 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 1154 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 1155 __le32 hw_min_tx_power; 1156 __le32 hw_max_tx_power; 1157 1158 struct hal_reg_capabilities hal_reg_capabilities; 1159 1160 __le32 sys_cap_info; 1161 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 1162 1163 /* 1164 * request to host to allocate a chuck of memory and pss it down to FW 1165 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 1166 * data structures. Only valid for low latency interfaces like PCIE 1167 * where FW can access this memory directly (or) by DMA. 1168 */ 1169 __le32 num_mem_reqs; 1170 1171 struct wlan_host_mem_req mem_reqs[1]; 1172 } __packed; 1173 1174 1175 #define WMI_SERVICE_READY_TIMEOUT_HZ (5*HZ) 1176 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5*HZ) 1177 1178 struct wmi_ready_event { 1179 __le32 sw_version; 1180 __le32 abi_version; 1181 struct wmi_mac_addr mac_addr; 1182 __le32 status; 1183 } __packed; 1184 1185 struct wmi_resource_config { 1186 /* number of virtual devices (VAPs) to support */ 1187 __le32 num_vdevs; 1188 1189 /* number of peer nodes to support */ 1190 __le32 num_peers; 1191 1192 /* 1193 * In offload mode target supports features like WOW, chatter and 1194 * other protocol offloads. In order to support them some 1195 * functionalities like reorder buffering, PN checking need to be 1196 * done in target. This determines maximum number of peers suported 1197 * by target in offload mode 1198 */ 1199 __le32 num_offload_peers; 1200 1201 /* For target-based RX reordering */ 1202 __le32 num_offload_reorder_bufs; 1203 1204 /* number of keys per peer */ 1205 __le32 num_peer_keys; 1206 1207 /* total number of TX/RX data TIDs */ 1208 __le32 num_tids; 1209 1210 /* 1211 * max skid for resolving hash collisions 1212 * 1213 * The address search table is sparse, so that if two MAC addresses 1214 * result in the same hash value, the second of these conflicting 1215 * entries can slide to the next index in the address search table, 1216 * and use it, if it is unoccupied. This ast_skid_limit parameter 1217 * specifies the upper bound on how many subsequent indices to search 1218 * over to find an unoccupied space. 1219 */ 1220 __le32 ast_skid_limit; 1221 1222 /* 1223 * the nominal chain mask for transmit 1224 * 1225 * The chain mask may be modified dynamically, e.g. to operate AP 1226 * tx with a reduced number of chains if no clients are associated. 1227 * This configuration parameter specifies the nominal chain-mask that 1228 * should be used when not operating with a reduced set of tx chains. 1229 */ 1230 __le32 tx_chain_mask; 1231 1232 /* 1233 * the nominal chain mask for receive 1234 * 1235 * The chain mask may be modified dynamically, e.g. for a client 1236 * to use a reduced number of chains for receive if the traffic to 1237 * the client is low enough that it doesn't require downlink MIMO 1238 * or antenna diversity. 1239 * This configuration parameter specifies the nominal chain-mask that 1240 * should be used when not operating with a reduced set of rx chains. 1241 */ 1242 __le32 rx_chain_mask; 1243 1244 /* 1245 * what rx reorder timeout (ms) to use for the AC 1246 * 1247 * Each WMM access class (voice, video, best-effort, background) will 1248 * have its own timeout value to dictate how long to wait for missing 1249 * rx MPDUs to arrive before flushing subsequent MPDUs that have 1250 * already been received. 1251 * This parameter specifies the timeout in milliseconds for each 1252 * class. 1253 */ 1254 __le32 rx_timeout_pri_vi; 1255 __le32 rx_timeout_pri_vo; 1256 __le32 rx_timeout_pri_be; 1257 __le32 rx_timeout_pri_bk; 1258 1259 /* 1260 * what mode the rx should decap packets to 1261 * 1262 * MAC can decap to RAW (no decap), native wifi or Ethernet types 1263 * THis setting also determines the default TX behavior, however TX 1264 * behavior can be modified on a per VAP basis during VAP init 1265 */ 1266 __le32 rx_decap_mode; 1267 1268 /* what is the maximum scan requests than can be queued */ 1269 __le32 scan_max_pending_reqs; 1270 1271 /* maximum VDEV that could use BMISS offload */ 1272 __le32 bmiss_offload_max_vdev; 1273 1274 /* maximum VDEV that could use offload roaming */ 1275 __le32 roam_offload_max_vdev; 1276 1277 /* maximum AP profiles that would push to offload roaming */ 1278 __le32 roam_offload_max_ap_profiles; 1279 1280 /* 1281 * how many groups to use for mcast->ucast conversion 1282 * 1283 * The target's WAL maintains a table to hold information regarding 1284 * which peers belong to a given multicast group, so that if 1285 * multicast->unicast conversion is enabled, the target can convert 1286 * multicast tx frames to a series of unicast tx frames, to each 1287 * peer within the multicast group. 1288 This num_mcast_groups configuration parameter tells the target how 1289 * many multicast groups to provide storage for within its multicast 1290 * group membership table. 1291 */ 1292 __le32 num_mcast_groups; 1293 1294 /* 1295 * size to alloc for the mcast membership table 1296 * 1297 * This num_mcast_table_elems configuration parameter tells the 1298 * target how many peer elements it needs to provide storage for in 1299 * its multicast group membership table. 1300 * These multicast group membership table elements are shared by the 1301 * multicast groups stored within the table. 1302 */ 1303 __le32 num_mcast_table_elems; 1304 1305 /* 1306 * whether/how to do multicast->unicast conversion 1307 * 1308 * This configuration parameter specifies whether the target should 1309 * perform multicast --> unicast conversion on transmit, and if so, 1310 * what to do if it finds no entries in its multicast group 1311 * membership table for the multicast IP address in the tx frame. 1312 * Configuration value: 1313 * 0 -> Do not perform multicast to unicast conversion. 1314 * 1 -> Convert multicast frames to unicast, if the IP multicast 1315 * address from the tx frame is found in the multicast group 1316 * membership table. If the IP multicast address is not found, 1317 * drop the frame. 1318 * 2 -> Convert multicast frames to unicast, if the IP multicast 1319 * address from the tx frame is found in the multicast group 1320 * membership table. If the IP multicast address is not found, 1321 * transmit the frame as multicast. 1322 */ 1323 __le32 mcast2ucast_mode; 1324 1325 /* 1326 * how much memory to allocate for a tx PPDU dbg log 1327 * 1328 * This parameter controls how much memory the target will allocate 1329 * to store a log of tx PPDU meta-information (how large the PPDU 1330 * was, when it was sent, whether it was successful, etc.) 1331 */ 1332 __le32 tx_dbg_log_size; 1333 1334 /* how many AST entries to be allocated for WDS */ 1335 __le32 num_wds_entries; 1336 1337 /* 1338 * MAC DMA burst size, e.g., For target PCI limit can be 1339 * 0 -default, 1 256B 1340 */ 1341 __le32 dma_burst_size; 1342 1343 /* 1344 * Fixed delimiters to be inserted after every MPDU to 1345 * account for interface latency to avoid underrun. 1346 */ 1347 __le32 mac_aggr_delim; 1348 1349 /* 1350 * determine whether target is responsible for detecting duplicate 1351 * non-aggregate MPDU and timing out stale fragments. 1352 * 1353 * A-MPDU reordering is always performed on the target. 1354 * 1355 * 0: target responsible for frag timeout and dup checking 1356 * 1: host responsible for frag timeout and dup checking 1357 */ 1358 __le32 rx_skip_defrag_timeout_dup_detection_check; 1359 1360 /* 1361 * Configuration for VoW : 1362 * No of Video Nodes to be supported 1363 * and Max no of descriptors for each Video link (node). 1364 */ 1365 __le32 vow_config; 1366 1367 /* maximum VDEV that could use GTK offload */ 1368 __le32 gtk_offload_max_vdev; 1369 1370 /* Number of msdu descriptors target should use */ 1371 __le32 num_msdu_desc; 1372 1373 /* 1374 * Max. number of Tx fragments per MSDU 1375 * This parameter controls the max number of Tx fragments per MSDU. 1376 * This is sent by the target as part of the WMI_SERVICE_READY event 1377 * and is overriden by the OS shim as required. 1378 */ 1379 __le32 max_frag_entries; 1380 } __packed; 1381 1382 struct wmi_resource_config_10x { 1383 /* number of virtual devices (VAPs) to support */ 1384 __le32 num_vdevs; 1385 1386 /* number of peer nodes to support */ 1387 __le32 num_peers; 1388 1389 /* number of keys per peer */ 1390 __le32 num_peer_keys; 1391 1392 /* total number of TX/RX data TIDs */ 1393 __le32 num_tids; 1394 1395 /* 1396 * max skid for resolving hash collisions 1397 * 1398 * The address search table is sparse, so that if two MAC addresses 1399 * result in the same hash value, the second of these conflicting 1400 * entries can slide to the next index in the address search table, 1401 * and use it, if it is unoccupied. This ast_skid_limit parameter 1402 * specifies the upper bound on how many subsequent indices to search 1403 * over to find an unoccupied space. 1404 */ 1405 __le32 ast_skid_limit; 1406 1407 /* 1408 * the nominal chain mask for transmit 1409 * 1410 * The chain mask may be modified dynamically, e.g. to operate AP 1411 * tx with a reduced number of chains if no clients are associated. 1412 * This configuration parameter specifies the nominal chain-mask that 1413 * should be used when not operating with a reduced set of tx chains. 1414 */ 1415 __le32 tx_chain_mask; 1416 1417 /* 1418 * the nominal chain mask for receive 1419 * 1420 * The chain mask may be modified dynamically, e.g. for a client 1421 * to use a reduced number of chains for receive if the traffic to 1422 * the client is low enough that it doesn't require downlink MIMO 1423 * or antenna diversity. 1424 * This configuration parameter specifies the nominal chain-mask that 1425 * should be used when not operating with a reduced set of rx chains. 1426 */ 1427 __le32 rx_chain_mask; 1428 1429 /* 1430 * what rx reorder timeout (ms) to use for the AC 1431 * 1432 * Each WMM access class (voice, video, best-effort, background) will 1433 * have its own timeout value to dictate how long to wait for missing 1434 * rx MPDUs to arrive before flushing subsequent MPDUs that have 1435 * already been received. 1436 * This parameter specifies the timeout in milliseconds for each 1437 * class. 1438 */ 1439 __le32 rx_timeout_pri_vi; 1440 __le32 rx_timeout_pri_vo; 1441 __le32 rx_timeout_pri_be; 1442 __le32 rx_timeout_pri_bk; 1443 1444 /* 1445 * what mode the rx should decap packets to 1446 * 1447 * MAC can decap to RAW (no decap), native wifi or Ethernet types 1448 * THis setting also determines the default TX behavior, however TX 1449 * behavior can be modified on a per VAP basis during VAP init 1450 */ 1451 __le32 rx_decap_mode; 1452 1453 /* what is the maximum scan requests than can be queued */ 1454 __le32 scan_max_pending_reqs; 1455 1456 /* maximum VDEV that could use BMISS offload */ 1457 __le32 bmiss_offload_max_vdev; 1458 1459 /* maximum VDEV that could use offload roaming */ 1460 __le32 roam_offload_max_vdev; 1461 1462 /* maximum AP profiles that would push to offload roaming */ 1463 __le32 roam_offload_max_ap_profiles; 1464 1465 /* 1466 * how many groups to use for mcast->ucast conversion 1467 * 1468 * The target's WAL maintains a table to hold information regarding 1469 * which peers belong to a given multicast group, so that if 1470 * multicast->unicast conversion is enabled, the target can convert 1471 * multicast tx frames to a series of unicast tx frames, to each 1472 * peer within the multicast group. 1473 This num_mcast_groups configuration parameter tells the target how 1474 * many multicast groups to provide storage for within its multicast 1475 * group membership table. 1476 */ 1477 __le32 num_mcast_groups; 1478 1479 /* 1480 * size to alloc for the mcast membership table 1481 * 1482 * This num_mcast_table_elems configuration parameter tells the 1483 * target how many peer elements it needs to provide storage for in 1484 * its multicast group membership table. 1485 * These multicast group membership table elements are shared by the 1486 * multicast groups stored within the table. 1487 */ 1488 __le32 num_mcast_table_elems; 1489 1490 /* 1491 * whether/how to do multicast->unicast conversion 1492 * 1493 * This configuration parameter specifies whether the target should 1494 * perform multicast --> unicast conversion on transmit, and if so, 1495 * what to do if it finds no entries in its multicast group 1496 * membership table for the multicast IP address in the tx frame. 1497 * Configuration value: 1498 * 0 -> Do not perform multicast to unicast conversion. 1499 * 1 -> Convert multicast frames to unicast, if the IP multicast 1500 * address from the tx frame is found in the multicast group 1501 * membership table. If the IP multicast address is not found, 1502 * drop the frame. 1503 * 2 -> Convert multicast frames to unicast, if the IP multicast 1504 * address from the tx frame is found in the multicast group 1505 * membership table. If the IP multicast address is not found, 1506 * transmit the frame as multicast. 1507 */ 1508 __le32 mcast2ucast_mode; 1509 1510 /* 1511 * how much memory to allocate for a tx PPDU dbg log 1512 * 1513 * This parameter controls how much memory the target will allocate 1514 * to store a log of tx PPDU meta-information (how large the PPDU 1515 * was, when it was sent, whether it was successful, etc.) 1516 */ 1517 __le32 tx_dbg_log_size; 1518 1519 /* how many AST entries to be allocated for WDS */ 1520 __le32 num_wds_entries; 1521 1522 /* 1523 * MAC DMA burst size, e.g., For target PCI limit can be 1524 * 0 -default, 1 256B 1525 */ 1526 __le32 dma_burst_size; 1527 1528 /* 1529 * Fixed delimiters to be inserted after every MPDU to 1530 * account for interface latency to avoid underrun. 1531 */ 1532 __le32 mac_aggr_delim; 1533 1534 /* 1535 * determine whether target is responsible for detecting duplicate 1536 * non-aggregate MPDU and timing out stale fragments. 1537 * 1538 * A-MPDU reordering is always performed on the target. 1539 * 1540 * 0: target responsible for frag timeout and dup checking 1541 * 1: host responsible for frag timeout and dup checking 1542 */ 1543 __le32 rx_skip_defrag_timeout_dup_detection_check; 1544 1545 /* 1546 * Configuration for VoW : 1547 * No of Video Nodes to be supported 1548 * and Max no of descriptors for each Video link (node). 1549 */ 1550 __le32 vow_config; 1551 1552 /* Number of msdu descriptors target should use */ 1553 __le32 num_msdu_desc; 1554 1555 /* 1556 * Max. number of Tx fragments per MSDU 1557 * This parameter controls the max number of Tx fragments per MSDU. 1558 * This is sent by the target as part of the WMI_SERVICE_READY event 1559 * and is overriden by the OS shim as required. 1560 */ 1561 __le32 max_frag_entries; 1562 } __packed; 1563 1564 1565 #define NUM_UNITS_IS_NUM_VDEVS 0x1 1566 #define NUM_UNITS_IS_NUM_PEERS 0x2 1567 1568 /* strucutre describing host memory chunk. */ 1569 struct host_memory_chunk { 1570 /* id of the request that is passed up in service ready */ 1571 __le32 req_id; 1572 /* the physical address the memory chunk */ 1573 __le32 ptr; 1574 /* size of the chunk */ 1575 __le32 size; 1576 } __packed; 1577 1578 struct wmi_init_cmd { 1579 struct wmi_resource_config resource_config; 1580 __le32 num_host_mem_chunks; 1581 1582 /* 1583 * variable number of host memory chunks. 1584 * This should be the last element in the structure 1585 */ 1586 struct host_memory_chunk host_mem_chunks[1]; 1587 } __packed; 1588 1589 /* _10x stucture is from 10.X FW API */ 1590 struct wmi_init_cmd_10x { 1591 struct wmi_resource_config_10x resource_config; 1592 __le32 num_host_mem_chunks; 1593 1594 /* 1595 * variable number of host memory chunks. 1596 * This should be the last element in the structure 1597 */ 1598 struct host_memory_chunk host_mem_chunks[1]; 1599 } __packed; 1600 1601 /* TLV for channel list */ 1602 struct wmi_chan_list { 1603 __le32 tag; /* WMI_CHAN_LIST_TAG */ 1604 __le32 num_chan; 1605 __le32 channel_list[0]; 1606 } __packed; 1607 1608 struct wmi_bssid_list { 1609 __le32 tag; /* WMI_BSSID_LIST_TAG */ 1610 __le32 num_bssid; 1611 struct wmi_mac_addr bssid_list[0]; 1612 } __packed; 1613 1614 struct wmi_ie_data { 1615 __le32 tag; /* WMI_IE_TAG */ 1616 __le32 ie_len; 1617 u8 ie_data[0]; 1618 } __packed; 1619 1620 struct wmi_ssid { 1621 __le32 ssid_len; 1622 u8 ssid[32]; 1623 } __packed; 1624 1625 struct wmi_ssid_list { 1626 __le32 tag; /* WMI_SSID_LIST_TAG */ 1627 __le32 num_ssids; 1628 struct wmi_ssid ssids[0]; 1629 } __packed; 1630 1631 /* prefix used by scan requestor ids on the host */ 1632 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000 1633 1634 /* prefix used by scan request ids generated on the host */ 1635 /* host cycles through the lower 12 bits to generate ids */ 1636 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000 1637 1638 #define WLAN_SCAN_PARAMS_MAX_SSID 16 1639 #define WLAN_SCAN_PARAMS_MAX_BSSID 4 1640 #define WLAN_SCAN_PARAMS_MAX_IE_LEN 256 1641 1642 /* Scan priority numbers must be sequential, starting with 0 */ 1643 enum wmi_scan_priority { 1644 WMI_SCAN_PRIORITY_VERY_LOW = 0, 1645 WMI_SCAN_PRIORITY_LOW, 1646 WMI_SCAN_PRIORITY_MEDIUM, 1647 WMI_SCAN_PRIORITY_HIGH, 1648 WMI_SCAN_PRIORITY_VERY_HIGH, 1649 WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */ 1650 }; 1651 1652 struct wmi_start_scan_cmd { 1653 /* Scan ID */ 1654 __le32 scan_id; 1655 /* Scan requestor ID */ 1656 __le32 scan_req_id; 1657 /* VDEV id(interface) that is requesting scan */ 1658 __le32 vdev_id; 1659 /* Scan Priority, input to scan scheduler */ 1660 __le32 scan_priority; 1661 /* Scan events subscription */ 1662 __le32 notify_scan_events; 1663 /* dwell time in msec on active channels */ 1664 __le32 dwell_time_active; 1665 /* dwell time in msec on passive channels */ 1666 __le32 dwell_time_passive; 1667 /* 1668 * min time in msec on the BSS channel,only valid if atleast one 1669 * VDEV is active 1670 */ 1671 __le32 min_rest_time; 1672 /* 1673 * max rest time in msec on the BSS channel,only valid if at least 1674 * one VDEV is active 1675 */ 1676 /* 1677 * the scanner will rest on the bss channel at least min_rest_time 1678 * after min_rest_time the scanner will start checking for tx/rx 1679 * activity on all VDEVs. if there is no activity the scanner will 1680 * switch to off channel. if there is activity the scanner will let 1681 * the radio on the bss channel until max_rest_time expires.at 1682 * max_rest_time scanner will switch to off channel irrespective of 1683 * activity. activity is determined by the idle_time parameter. 1684 */ 1685 __le32 max_rest_time; 1686 /* 1687 * time before sending next set of probe requests. 1688 * The scanner keeps repeating probe requests transmission with 1689 * period specified by repeat_probe_time. 1690 * The number of probe requests specified depends on the ssid_list 1691 * and bssid_list 1692 */ 1693 __le32 repeat_probe_time; 1694 /* time in msec between 2 consequetive probe requests with in a set. */ 1695 __le32 probe_spacing_time; 1696 /* 1697 * data inactivity time in msec on bss channel that will be used by 1698 * scanner for measuring the inactivity. 1699 */ 1700 __le32 idle_time; 1701 /* maximum time in msec allowed for scan */ 1702 __le32 max_scan_time; 1703 /* 1704 * delay in msec before sending first probe request after switching 1705 * to a channel 1706 */ 1707 __le32 probe_delay; 1708 /* Scan control flags */ 1709 __le32 scan_ctrl_flags; 1710 1711 /* Burst duration time in msecs */ 1712 __le32 burst_duration; 1713 /* 1714 * TLV (tag length value ) paramerters follow the scan_cmd structure. 1715 * TLV can contain channel list, bssid list, ssid list and 1716 * ie. the TLV tags are defined above; 1717 */ 1718 } __packed; 1719 1720 /* This is the definition from 10.X firmware branch */ 1721 struct wmi_start_scan_cmd_10x { 1722 /* Scan ID */ 1723 __le32 scan_id; 1724 1725 /* Scan requestor ID */ 1726 __le32 scan_req_id; 1727 1728 /* VDEV id(interface) that is requesting scan */ 1729 __le32 vdev_id; 1730 1731 /* Scan Priority, input to scan scheduler */ 1732 __le32 scan_priority; 1733 1734 /* Scan events subscription */ 1735 __le32 notify_scan_events; 1736 1737 /* dwell time in msec on active channels */ 1738 __le32 dwell_time_active; 1739 1740 /* dwell time in msec on passive channels */ 1741 __le32 dwell_time_passive; 1742 1743 /* 1744 * min time in msec on the BSS channel,only valid if atleast one 1745 * VDEV is active 1746 */ 1747 __le32 min_rest_time; 1748 1749 /* 1750 * max rest time in msec on the BSS channel,only valid if at least 1751 * one VDEV is active 1752 */ 1753 /* 1754 * the scanner will rest on the bss channel at least min_rest_time 1755 * after min_rest_time the scanner will start checking for tx/rx 1756 * activity on all VDEVs. if there is no activity the scanner will 1757 * switch to off channel. if there is activity the scanner will let 1758 * the radio on the bss channel until max_rest_time expires.at 1759 * max_rest_time scanner will switch to off channel irrespective of 1760 * activity. activity is determined by the idle_time parameter. 1761 */ 1762 __le32 max_rest_time; 1763 1764 /* 1765 * time before sending next set of probe requests. 1766 * The scanner keeps repeating probe requests transmission with 1767 * period specified by repeat_probe_time. 1768 * The number of probe requests specified depends on the ssid_list 1769 * and bssid_list 1770 */ 1771 __le32 repeat_probe_time; 1772 1773 /* time in msec between 2 consequetive probe requests with in a set. */ 1774 __le32 probe_spacing_time; 1775 1776 /* 1777 * data inactivity time in msec on bss channel that will be used by 1778 * scanner for measuring the inactivity. 1779 */ 1780 __le32 idle_time; 1781 1782 /* maximum time in msec allowed for scan */ 1783 __le32 max_scan_time; 1784 1785 /* 1786 * delay in msec before sending first probe request after switching 1787 * to a channel 1788 */ 1789 __le32 probe_delay; 1790 1791 /* Scan control flags */ 1792 __le32 scan_ctrl_flags; 1793 1794 /* 1795 * TLV (tag length value ) paramerters follow the scan_cmd structure. 1796 * TLV can contain channel list, bssid list, ssid list and 1797 * ie. the TLV tags are defined above; 1798 */ 1799 } __packed; 1800 1801 1802 struct wmi_ssid_arg { 1803 int len; 1804 const u8 *ssid; 1805 }; 1806 1807 struct wmi_bssid_arg { 1808 const u8 *bssid; 1809 }; 1810 1811 struct wmi_start_scan_arg { 1812 u32 scan_id; 1813 u32 scan_req_id; 1814 u32 vdev_id; 1815 u32 scan_priority; 1816 u32 notify_scan_events; 1817 u32 dwell_time_active; 1818 u32 dwell_time_passive; 1819 u32 min_rest_time; 1820 u32 max_rest_time; 1821 u32 repeat_probe_time; 1822 u32 probe_spacing_time; 1823 u32 idle_time; 1824 u32 max_scan_time; 1825 u32 probe_delay; 1826 u32 scan_ctrl_flags; 1827 1828 u32 ie_len; 1829 u32 n_channels; 1830 u32 n_ssids; 1831 u32 n_bssids; 1832 1833 u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN]; 1834 u32 channels[64]; 1835 struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID]; 1836 struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID]; 1837 }; 1838 1839 /* scan control flags */ 1840 1841 /* passively scan all channels including active channels */ 1842 #define WMI_SCAN_FLAG_PASSIVE 0x1 1843 /* add wild card ssid probe request even though ssid_list is specified. */ 1844 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2 1845 /* add cck rates to rates/xrate ie for the generated probe request */ 1846 #define WMI_SCAN_ADD_CCK_RATES 0x4 1847 /* add ofdm rates to rates/xrate ie for the generated probe request */ 1848 #define WMI_SCAN_ADD_OFDM_RATES 0x8 1849 /* To enable indication of Chan load and Noise floor to host */ 1850 #define WMI_SCAN_CHAN_STAT_EVENT 0x10 1851 /* Filter Probe request frames */ 1852 #define WMI_SCAN_FILTER_PROBE_REQ 0x20 1853 /* When set, DFS channels will not be scanned */ 1854 #define WMI_SCAN_BYPASS_DFS_CHN 0x40 1855 /* Different FW scan engine may choose to bail out on errors. 1856 * Allow the driver to have influence over that. */ 1857 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80 1858 1859 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */ 1860 #define WMI_SCAN_CLASS_MASK 0xFF000000 1861 1862 1863 enum wmi_stop_scan_type { 1864 WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */ 1865 WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */ 1866 WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */ 1867 }; 1868 1869 struct wmi_stop_scan_cmd { 1870 __le32 scan_req_id; 1871 __le32 scan_id; 1872 __le32 req_type; 1873 __le32 vdev_id; 1874 } __packed; 1875 1876 struct wmi_stop_scan_arg { 1877 u32 req_id; 1878 enum wmi_stop_scan_type req_type; 1879 union { 1880 u32 scan_id; 1881 u32 vdev_id; 1882 } u; 1883 }; 1884 1885 struct wmi_scan_chan_list_cmd { 1886 __le32 num_scan_chans; 1887 struct wmi_channel chan_info[0]; 1888 } __packed; 1889 1890 struct wmi_scan_chan_list_arg { 1891 u32 n_channels; 1892 struct wmi_channel_arg *channels; 1893 }; 1894 1895 enum wmi_bss_filter { 1896 WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */ 1897 WMI_BSS_FILTER_ALL, /* all beacons forwarded */ 1898 WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */ 1899 WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */ 1900 WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */ 1901 WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */ 1902 WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */ 1903 WMI_BSS_FILTER_LAST_BSS, /* marker only */ 1904 }; 1905 1906 enum wmi_scan_event_type { 1907 WMI_SCAN_EVENT_STARTED = 0x1, 1908 WMI_SCAN_EVENT_COMPLETED = 0x2, 1909 WMI_SCAN_EVENT_BSS_CHANNEL = 0x4, 1910 WMI_SCAN_EVENT_FOREIGN_CHANNEL = 0x8, 1911 WMI_SCAN_EVENT_DEQUEUED = 0x10, 1912 WMI_SCAN_EVENT_PREEMPTED = 0x20, /* possibly by high-prio scan */ 1913 WMI_SCAN_EVENT_START_FAILED = 0x40, 1914 WMI_SCAN_EVENT_RESTARTED = 0x80, 1915 WMI_SCAN_EVENT_MAX = 0x8000 1916 }; 1917 1918 enum wmi_scan_completion_reason { 1919 WMI_SCAN_REASON_COMPLETED, 1920 WMI_SCAN_REASON_CANCELLED, 1921 WMI_SCAN_REASON_PREEMPTED, 1922 WMI_SCAN_REASON_TIMEDOUT, 1923 WMI_SCAN_REASON_MAX, 1924 }; 1925 1926 struct wmi_scan_event { 1927 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 1928 __le32 reason; /* %WMI_SCAN_REASON_ */ 1929 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 1930 __le32 scan_req_id; 1931 __le32 scan_id; 1932 __le32 vdev_id; 1933 } __packed; 1934 1935 /* 1936 * This defines how much headroom is kept in the 1937 * receive frame between the descriptor and the 1938 * payload, in order for the WMI PHY error and 1939 * management handler to insert header contents. 1940 * 1941 * This is in bytes. 1942 */ 1943 #define WMI_MGMT_RX_HDR_HEADROOM 52 1944 1945 /* 1946 * This event will be used for sending scan results 1947 * as well as rx mgmt frames to the host. The rx buffer 1948 * will be sent as part of this WMI event. It would be a 1949 * good idea to pass all the fields in the RX status 1950 * descriptor up to the host. 1951 */ 1952 struct wmi_mgmt_rx_hdr_v1 { 1953 __le32 channel; 1954 __le32 snr; 1955 __le32 rate; 1956 __le32 phy_mode; 1957 __le32 buf_len; 1958 __le32 status; /* %WMI_RX_STATUS_ */ 1959 } __packed; 1960 1961 struct wmi_mgmt_rx_hdr_v2 { 1962 struct wmi_mgmt_rx_hdr_v1 v1; 1963 __le32 rssi_ctl[4]; 1964 } __packed; 1965 1966 struct wmi_mgmt_rx_event_v1 { 1967 struct wmi_mgmt_rx_hdr_v1 hdr; 1968 u8 buf[0]; 1969 } __packed; 1970 1971 struct wmi_mgmt_rx_event_v2 { 1972 struct wmi_mgmt_rx_hdr_v2 hdr; 1973 u8 buf[0]; 1974 } __packed; 1975 1976 #define WMI_RX_STATUS_OK 0x00 1977 #define WMI_RX_STATUS_ERR_CRC 0x01 1978 #define WMI_RX_STATUS_ERR_DECRYPT 0x08 1979 #define WMI_RX_STATUS_ERR_MIC 0x10 1980 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20 1981 1982 #define PHY_ERROR_SPECTRAL_SCAN 0x26 1983 #define PHY_ERROR_FALSE_RADAR_EXT 0x24 1984 #define PHY_ERROR_RADAR 0x05 1985 1986 struct wmi_single_phyerr_rx_hdr { 1987 /* TSF timestamp */ 1988 __le32 tsf_timestamp; 1989 1990 /* 1991 * Current freq1, freq2 1992 * 1993 * [7:0]: freq1[lo] 1994 * [15:8] : freq1[hi] 1995 * [23:16]: freq2[lo] 1996 * [31:24]: freq2[hi] 1997 */ 1998 __le16 freq1; 1999 __le16 freq2; 2000 2001 /* 2002 * Combined RSSI over all chains and channel width for this PHY error 2003 * 2004 * [7:0]: RSSI combined 2005 * [15:8]: Channel width (MHz) 2006 * [23:16]: PHY error code 2007 * [24:16]: reserved (future use) 2008 */ 2009 u8 rssi_combined; 2010 u8 chan_width_mhz; 2011 u8 phy_err_code; 2012 u8 rsvd0; 2013 2014 /* 2015 * RSSI on chain 0 through 3 2016 * 2017 * This is formatted the same as the PPDU_START RX descriptor 2018 * field: 2019 * 2020 * [7:0]: pri20 2021 * [15:8]: sec20 2022 * [23:16]: sec40 2023 * [31:24]: sec80 2024 */ 2025 2026 __le32 rssi_chain0; 2027 __le32 rssi_chain1; 2028 __le32 rssi_chain2; 2029 __le32 rssi_chain3; 2030 2031 /* 2032 * Last calibrated NF value for chain 0 through 3 2033 * 2034 * nf_list_1: 2035 * 2036 * + [15:0] - chain 0 2037 * + [31:16] - chain 1 2038 * 2039 * nf_list_2: 2040 * 2041 * + [15:0] - chain 2 2042 * + [31:16] - chain 3 2043 */ 2044 __le32 nf_list_1; 2045 __le32 nf_list_2; 2046 2047 2048 /* Length of the frame */ 2049 __le32 buf_len; 2050 } __packed; 2051 2052 struct wmi_single_phyerr_rx_event { 2053 /* Phy error event header */ 2054 struct wmi_single_phyerr_rx_hdr hdr; 2055 /* frame buffer */ 2056 u8 bufp[0]; 2057 } __packed; 2058 2059 struct wmi_comb_phyerr_rx_hdr { 2060 /* Phy error phy error count */ 2061 __le32 num_phyerr_events; 2062 __le32 tsf_l32; 2063 __le32 tsf_u32; 2064 } __packed; 2065 2066 struct wmi_comb_phyerr_rx_event { 2067 /* Phy error phy error count */ 2068 struct wmi_comb_phyerr_rx_hdr hdr; 2069 /* 2070 * frame buffer - contains multiple payloads in the order: 2071 * header - payload, header - payload... 2072 * (The header is of type: wmi_single_phyerr_rx_hdr) 2073 */ 2074 u8 bufp[0]; 2075 } __packed; 2076 2077 #define PHYERR_TLV_SIG 0xBB 2078 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB 2079 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8 2080 2081 struct phyerr_radar_report { 2082 __le32 reg0; /* RADAR_REPORT_REG0_* */ 2083 __le32 reg1; /* REDAR_REPORT_REG1_* */ 2084 } __packed; 2085 2086 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000 2087 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31 2088 2089 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000 2090 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30 2091 2092 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000 2093 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20 2094 2095 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000 2096 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16 2097 2098 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00 2099 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10 2100 2101 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF 2102 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0 2103 2104 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000 2105 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31 2106 2107 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000 2108 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24 2109 2110 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000 2111 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16 2112 2113 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00 2114 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8 2115 2116 #define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF 2117 #define RADAR_REPORT_REG1_PULSE_DUR_LSB 0 2118 2119 struct phyerr_fft_report { 2120 __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */ 2121 __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */ 2122 } __packed; 2123 2124 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000 2125 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23 2126 2127 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000 2128 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14 2129 2130 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000 2131 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12 2132 2133 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF 2134 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0 2135 2136 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000 2137 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26 2138 2139 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000 2140 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18 2141 2142 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00 2143 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8 2144 2145 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF 2146 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0 2147 2148 2149 struct phyerr_tlv { 2150 __le16 len; 2151 u8 tag; 2152 u8 sig; 2153 } __packed; 2154 2155 #define DFS_RSSI_POSSIBLY_FALSE 50 2156 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40 2157 2158 struct wmi_mgmt_tx_hdr { 2159 __le32 vdev_id; 2160 struct wmi_mac_addr peer_macaddr; 2161 __le32 tx_rate; 2162 __le32 tx_power; 2163 __le32 buf_len; 2164 } __packed; 2165 2166 struct wmi_mgmt_tx_cmd { 2167 struct wmi_mgmt_tx_hdr hdr; 2168 u8 buf[0]; 2169 } __packed; 2170 2171 struct wmi_echo_event { 2172 __le32 value; 2173 } __packed; 2174 2175 struct wmi_echo_cmd { 2176 __le32 value; 2177 } __packed; 2178 2179 2180 struct wmi_pdev_set_regdomain_cmd { 2181 __le32 reg_domain; 2182 __le32 reg_domain_2G; 2183 __le32 reg_domain_5G; 2184 __le32 conformance_test_limit_2G; 2185 __le32 conformance_test_limit_5G; 2186 } __packed; 2187 2188 /* Command to set/unset chip in quiet mode */ 2189 struct wmi_pdev_set_quiet_cmd { 2190 /* period in TUs */ 2191 __le32 period; 2192 2193 /* duration in TUs */ 2194 __le32 duration; 2195 2196 /* offset in TUs */ 2197 __le32 next_start; 2198 2199 /* enable/disable */ 2200 __le32 enabled; 2201 } __packed; 2202 2203 2204 /* 2205 * 802.11g protection mode. 2206 */ 2207 enum ath10k_protmode { 2208 ATH10K_PROT_NONE = 0, /* no protection */ 2209 ATH10K_PROT_CTSONLY = 1, /* CTS to self */ 2210 ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */ 2211 }; 2212 2213 enum wmi_beacon_gen_mode { 2214 WMI_BEACON_STAGGERED_MODE = 0, 2215 WMI_BEACON_BURST_MODE = 1 2216 }; 2217 2218 enum wmi_csa_event_ies_present_flag { 2219 WMI_CSA_IE_PRESENT = 0x00000001, 2220 WMI_XCSA_IE_PRESENT = 0x00000002, 2221 WMI_WBW_IE_PRESENT = 0x00000004, 2222 WMI_CSWARP_IE_PRESENT = 0x00000008, 2223 }; 2224 2225 /* wmi CSA receive event from beacon frame */ 2226 struct wmi_csa_event { 2227 __le32 i_fc_dur; 2228 /* Bit 0-15: FC */ 2229 /* Bit 16-31: DUR */ 2230 struct wmi_mac_addr i_addr1; 2231 struct wmi_mac_addr i_addr2; 2232 __le32 csa_ie[2]; 2233 __le32 xcsa_ie[2]; 2234 __le32 wb_ie[2]; 2235 __le32 cswarp_ie; 2236 __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */ 2237 } __packed; 2238 2239 /* the definition of different PDEV parameters */ 2240 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500 2241 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500 2242 #define PEER_DEFAULT_STATS_UPDATE_PERIOD 500 2243 2244 struct wmi_pdev_param_map { 2245 u32 tx_chain_mask; 2246 u32 rx_chain_mask; 2247 u32 txpower_limit2g; 2248 u32 txpower_limit5g; 2249 u32 txpower_scale; 2250 u32 beacon_gen_mode; 2251 u32 beacon_tx_mode; 2252 u32 resmgr_offchan_mode; 2253 u32 protection_mode; 2254 u32 dynamic_bw; 2255 u32 non_agg_sw_retry_th; 2256 u32 agg_sw_retry_th; 2257 u32 sta_kickout_th; 2258 u32 ac_aggrsize_scaling; 2259 u32 ltr_enable; 2260 u32 ltr_ac_latency_be; 2261 u32 ltr_ac_latency_bk; 2262 u32 ltr_ac_latency_vi; 2263 u32 ltr_ac_latency_vo; 2264 u32 ltr_ac_latency_timeout; 2265 u32 ltr_sleep_override; 2266 u32 ltr_rx_override; 2267 u32 ltr_tx_activity_timeout; 2268 u32 l1ss_enable; 2269 u32 dsleep_enable; 2270 u32 pcielp_txbuf_flush; 2271 u32 pcielp_txbuf_watermark; 2272 u32 pcielp_txbuf_tmo_en; 2273 u32 pcielp_txbuf_tmo_value; 2274 u32 pdev_stats_update_period; 2275 u32 vdev_stats_update_period; 2276 u32 peer_stats_update_period; 2277 u32 bcnflt_stats_update_period; 2278 u32 pmf_qos; 2279 u32 arp_ac_override; 2280 u32 dcs; 2281 u32 ani_enable; 2282 u32 ani_poll_period; 2283 u32 ani_listen_period; 2284 u32 ani_ofdm_level; 2285 u32 ani_cck_level; 2286 u32 dyntxchain; 2287 u32 proxy_sta; 2288 u32 idle_ps_config; 2289 u32 power_gating_sleep; 2290 u32 fast_channel_reset; 2291 u32 burst_dur; 2292 u32 burst_enable; 2293 }; 2294 2295 #define WMI_PDEV_PARAM_UNSUPPORTED 0 2296 2297 enum wmi_pdev_param { 2298 /* TX chian mask */ 2299 WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 2300 /* RX chian mask */ 2301 WMI_PDEV_PARAM_RX_CHAIN_MASK, 2302 /* TX power limit for 2G Radio */ 2303 WMI_PDEV_PARAM_TXPOWER_LIMIT2G, 2304 /* TX power limit for 5G Radio */ 2305 WMI_PDEV_PARAM_TXPOWER_LIMIT5G, 2306 /* TX power scale */ 2307 WMI_PDEV_PARAM_TXPOWER_SCALE, 2308 /* Beacon generation mode . 0: host, 1: target */ 2309 WMI_PDEV_PARAM_BEACON_GEN_MODE, 2310 /* Beacon generation mode . 0: staggered 1: bursted */ 2311 WMI_PDEV_PARAM_BEACON_TX_MODE, 2312 /* 2313 * Resource manager off chan mode . 2314 * 0: turn off off chan mode. 1: turn on offchan mode 2315 */ 2316 WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 2317 /* 2318 * Protection mode: 2319 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 2320 */ 2321 WMI_PDEV_PARAM_PROTECTION_MODE, 2322 /* 2323 * Dynamic bandwidth - 0: disable, 1: enable 2324 * 2325 * When enabled HW rate control tries different bandwidths when 2326 * retransmitting frames. 2327 */ 2328 WMI_PDEV_PARAM_DYNAMIC_BW, 2329 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 2330 WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 2331 /* aggregrate sw retry threshold. 0-disable*/ 2332 WMI_PDEV_PARAM_AGG_SW_RETRY_TH, 2333 /* Station kickout threshold (non of consecutive failures).0-disable */ 2334 WMI_PDEV_PARAM_STA_KICKOUT_TH, 2335 /* Aggerate size scaling configuration per AC */ 2336 WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING, 2337 /* LTR enable */ 2338 WMI_PDEV_PARAM_LTR_ENABLE, 2339 /* LTR latency for BE, in us */ 2340 WMI_PDEV_PARAM_LTR_AC_LATENCY_BE, 2341 /* LTR latency for BK, in us */ 2342 WMI_PDEV_PARAM_LTR_AC_LATENCY_BK, 2343 /* LTR latency for VI, in us */ 2344 WMI_PDEV_PARAM_LTR_AC_LATENCY_VI, 2345 /* LTR latency for VO, in us */ 2346 WMI_PDEV_PARAM_LTR_AC_LATENCY_VO, 2347 /* LTR AC latency timeout, in ms */ 2348 WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 2349 /* LTR platform latency override, in us */ 2350 WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 2351 /* LTR-RX override, in us */ 2352 WMI_PDEV_PARAM_LTR_RX_OVERRIDE, 2353 /* Tx activity timeout for LTR, in us */ 2354 WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 2355 /* L1SS state machine enable */ 2356 WMI_PDEV_PARAM_L1SS_ENABLE, 2357 /* Deep sleep state machine enable */ 2358 WMI_PDEV_PARAM_DSLEEP_ENABLE, 2359 /* RX buffering flush enable */ 2360 WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 2361 /* RX buffering matermark */ 2362 WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 2363 /* RX buffering timeout enable */ 2364 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 2365 /* RX buffering timeout value */ 2366 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 2367 /* pdev level stats update period in ms */ 2368 WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 2369 /* vdev level stats update period in ms */ 2370 WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 2371 /* peer level stats update period in ms */ 2372 WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 2373 /* beacon filter status update period */ 2374 WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 2375 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 2376 WMI_PDEV_PARAM_PMF_QOS, 2377 /* Access category on which ARP frames are sent */ 2378 WMI_PDEV_PARAM_ARP_AC_OVERRIDE, 2379 /* DCS configuration */ 2380 WMI_PDEV_PARAM_DCS, 2381 /* Enable/Disable ANI on target */ 2382 WMI_PDEV_PARAM_ANI_ENABLE, 2383 /* configure the ANI polling period */ 2384 WMI_PDEV_PARAM_ANI_POLL_PERIOD, 2385 /* configure the ANI listening period */ 2386 WMI_PDEV_PARAM_ANI_LISTEN_PERIOD, 2387 /* configure OFDM immunity level */ 2388 WMI_PDEV_PARAM_ANI_OFDM_LEVEL, 2389 /* configure CCK immunity level */ 2390 WMI_PDEV_PARAM_ANI_CCK_LEVEL, 2391 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 2392 WMI_PDEV_PARAM_DYNTXCHAIN, 2393 /* Enable/Disable proxy STA */ 2394 WMI_PDEV_PARAM_PROXY_STA, 2395 /* Enable/Disable low power state when all VDEVs are inactive/idle. */ 2396 WMI_PDEV_PARAM_IDLE_PS_CONFIG, 2397 /* Enable/Disable power gating sleep */ 2398 WMI_PDEV_PARAM_POWER_GATING_SLEEP, 2399 }; 2400 2401 enum wmi_10x_pdev_param { 2402 /* TX chian mask */ 2403 WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 2404 /* RX chian mask */ 2405 WMI_10X_PDEV_PARAM_RX_CHAIN_MASK, 2406 /* TX power limit for 2G Radio */ 2407 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G, 2408 /* TX power limit for 5G Radio */ 2409 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G, 2410 /* TX power scale */ 2411 WMI_10X_PDEV_PARAM_TXPOWER_SCALE, 2412 /* Beacon generation mode . 0: host, 1: target */ 2413 WMI_10X_PDEV_PARAM_BEACON_GEN_MODE, 2414 /* Beacon generation mode . 0: staggered 1: bursted */ 2415 WMI_10X_PDEV_PARAM_BEACON_TX_MODE, 2416 /* 2417 * Resource manager off chan mode . 2418 * 0: turn off off chan mode. 1: turn on offchan mode 2419 */ 2420 WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 2421 /* 2422 * Protection mode: 2423 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 2424 */ 2425 WMI_10X_PDEV_PARAM_PROTECTION_MODE, 2426 /* Dynamic bandwidth 0: disable 1: enable */ 2427 WMI_10X_PDEV_PARAM_DYNAMIC_BW, 2428 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 2429 WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 2430 /* aggregrate sw retry threshold. 0-disable*/ 2431 WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH, 2432 /* Station kickout threshold (non of consecutive failures).0-disable */ 2433 WMI_10X_PDEV_PARAM_STA_KICKOUT_TH, 2434 /* Aggerate size scaling configuration per AC */ 2435 WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING, 2436 /* LTR enable */ 2437 WMI_10X_PDEV_PARAM_LTR_ENABLE, 2438 /* LTR latency for BE, in us */ 2439 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE, 2440 /* LTR latency for BK, in us */ 2441 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK, 2442 /* LTR latency for VI, in us */ 2443 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI, 2444 /* LTR latency for VO, in us */ 2445 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO, 2446 /* LTR AC latency timeout, in ms */ 2447 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 2448 /* LTR platform latency override, in us */ 2449 WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 2450 /* LTR-RX override, in us */ 2451 WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE, 2452 /* Tx activity timeout for LTR, in us */ 2453 WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 2454 /* L1SS state machine enable */ 2455 WMI_10X_PDEV_PARAM_L1SS_ENABLE, 2456 /* Deep sleep state machine enable */ 2457 WMI_10X_PDEV_PARAM_DSLEEP_ENABLE, 2458 /* pdev level stats update period in ms */ 2459 WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 2460 /* vdev level stats update period in ms */ 2461 WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 2462 /* peer level stats update period in ms */ 2463 WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 2464 /* beacon filter status update period */ 2465 WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 2466 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 2467 WMI_10X_PDEV_PARAM_PMF_QOS, 2468 /* Access category on which ARP and DHCP frames are sent */ 2469 WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE, 2470 /* DCS configuration */ 2471 WMI_10X_PDEV_PARAM_DCS, 2472 /* Enable/Disable ANI on target */ 2473 WMI_10X_PDEV_PARAM_ANI_ENABLE, 2474 /* configure the ANI polling period */ 2475 WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD, 2476 /* configure the ANI listening period */ 2477 WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD, 2478 /* configure OFDM immunity level */ 2479 WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL, 2480 /* configure CCK immunity level */ 2481 WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL, 2482 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 2483 WMI_10X_PDEV_PARAM_DYNTXCHAIN, 2484 /* Enable/Disable Fast channel reset*/ 2485 WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET, 2486 /* Set Bursting DUR */ 2487 WMI_10X_PDEV_PARAM_BURST_DUR, 2488 /* Set Bursting Enable*/ 2489 WMI_10X_PDEV_PARAM_BURST_ENABLE, 2490 }; 2491 2492 struct wmi_pdev_set_param_cmd { 2493 __le32 param_id; 2494 __le32 param_value; 2495 } __packed; 2496 2497 struct wmi_pdev_get_tpc_config_cmd { 2498 /* parameter */ 2499 __le32 param; 2500 } __packed; 2501 2502 #define WMI_TPC_RATE_MAX 160 2503 #define WMI_TPC_TX_N_CHAIN 4 2504 2505 enum wmi_tpc_config_event_flag { 2506 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, 2507 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, 2508 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, 2509 }; 2510 2511 struct wmi_pdev_tpc_config_event { 2512 __le32 reg_domain; 2513 __le32 chan_freq; 2514 __le32 phy_mode; 2515 __le32 twice_antenna_reduction; 2516 __le32 twice_max_rd_power; 2517 s32 twice_antenna_gain; 2518 __le32 power_limit; 2519 __le32 rate_max; 2520 __le32 num_tx_chain; 2521 __le32 ctl; 2522 __le32 flags; 2523 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 2524 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 2525 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 2526 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 2527 u8 rates_array[WMI_TPC_RATE_MAX]; 2528 } __packed; 2529 2530 /* Transmit power scale factor. */ 2531 enum wmi_tp_scale { 2532 WMI_TP_SCALE_MAX = 0, /* no scaling (default) */ 2533 WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ 2534 WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ 2535 WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ 2536 WMI_TP_SCALE_MIN = 4, /* min, but still on */ 2537 WMI_TP_SCALE_SIZE = 5, /* max num of enum */ 2538 }; 2539 2540 struct wmi_set_channel_cmd { 2541 /* channel (only frequency and mode info are used) */ 2542 struct wmi_channel chan; 2543 } __packed; 2544 2545 struct wmi_pdev_chanlist_update_event { 2546 /* number of channels */ 2547 __le32 num_chan; 2548 /* array of channels */ 2549 struct wmi_channel channel_list[1]; 2550 } __packed; 2551 2552 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32) 2553 2554 struct wmi_debug_mesg_event { 2555 /* message buffer, NULL terminated */ 2556 char bufp[WMI_MAX_DEBUG_MESG]; 2557 } __packed; 2558 2559 enum { 2560 /* P2P device */ 2561 VDEV_SUBTYPE_P2PDEV = 0, 2562 /* P2P client */ 2563 VDEV_SUBTYPE_P2PCLI, 2564 /* P2P GO */ 2565 VDEV_SUBTYPE_P2PGO, 2566 /* BT3.0 HS */ 2567 VDEV_SUBTYPE_BT, 2568 }; 2569 2570 struct wmi_pdev_set_channel_cmd { 2571 /* idnore power , only use flags , mode and freq */ 2572 struct wmi_channel chan; 2573 } __packed; 2574 2575 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */ 2576 #define WMI_DSCP_MAP_MAX (64) 2577 struct wmi_pdev_set_dscp_tid_map_cmd { 2578 /* map indicating DSCP to TID conversion */ 2579 __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX]; 2580 } __packed; 2581 2582 enum mcast_bcast_rate_id { 2583 WMI_SET_MCAST_RATE, 2584 WMI_SET_BCAST_RATE 2585 }; 2586 2587 struct mcast_bcast_rate { 2588 enum mcast_bcast_rate_id rate_id; 2589 __le32 rate; 2590 } __packed; 2591 2592 struct wmi_wmm_params { 2593 __le32 cwmin; 2594 __le32 cwmax; 2595 __le32 aifs; 2596 __le32 txop; 2597 __le32 acm; 2598 __le32 no_ack; 2599 } __packed; 2600 2601 struct wmi_pdev_set_wmm_params { 2602 struct wmi_wmm_params ac_be; 2603 struct wmi_wmm_params ac_bk; 2604 struct wmi_wmm_params ac_vi; 2605 struct wmi_wmm_params ac_vo; 2606 } __packed; 2607 2608 struct wmi_wmm_params_arg { 2609 u32 cwmin; 2610 u32 cwmax; 2611 u32 aifs; 2612 u32 txop; 2613 u32 acm; 2614 u32 no_ack; 2615 }; 2616 2617 struct wmi_pdev_set_wmm_params_arg { 2618 struct wmi_wmm_params_arg ac_be; 2619 struct wmi_wmm_params_arg ac_bk; 2620 struct wmi_wmm_params_arg ac_vi; 2621 struct wmi_wmm_params_arg ac_vo; 2622 }; 2623 2624 struct wal_dbg_tx_stats { 2625 /* Num HTT cookies queued to dispatch list */ 2626 __le32 comp_queued; 2627 2628 /* Num HTT cookies dispatched */ 2629 __le32 comp_delivered; 2630 2631 /* Num MSDU queued to WAL */ 2632 __le32 msdu_enqued; 2633 2634 /* Num MPDU queue to WAL */ 2635 __le32 mpdu_enqued; 2636 2637 /* Num MSDUs dropped by WMM limit */ 2638 __le32 wmm_drop; 2639 2640 /* Num Local frames queued */ 2641 __le32 local_enqued; 2642 2643 /* Num Local frames done */ 2644 __le32 local_freed; 2645 2646 /* Num queued to HW */ 2647 __le32 hw_queued; 2648 2649 /* Num PPDU reaped from HW */ 2650 __le32 hw_reaped; 2651 2652 /* Num underruns */ 2653 __le32 underrun; 2654 2655 /* Num PPDUs cleaned up in TX abort */ 2656 __le32 tx_abort; 2657 2658 /* Num MPDUs requed by SW */ 2659 __le32 mpdus_requed; 2660 2661 /* excessive retries */ 2662 __le32 tx_ko; 2663 2664 /* data hw rate code */ 2665 __le32 data_rc; 2666 2667 /* Scheduler self triggers */ 2668 __le32 self_triggers; 2669 2670 /* frames dropped due to excessive sw retries */ 2671 __le32 sw_retry_failure; 2672 2673 /* illegal rate phy errors */ 2674 __le32 illgl_rate_phy_err; 2675 2676 /* wal pdev continous xretry */ 2677 __le32 pdev_cont_xretry; 2678 2679 /* wal pdev continous xretry */ 2680 __le32 pdev_tx_timeout; 2681 2682 /* wal pdev resets */ 2683 __le32 pdev_resets; 2684 2685 __le32 phy_underrun; 2686 2687 /* MPDU is more than txop limit */ 2688 __le32 txop_ovf; 2689 } __packed; 2690 2691 struct wal_dbg_rx_stats { 2692 /* Cnts any change in ring routing mid-ppdu */ 2693 __le32 mid_ppdu_route_change; 2694 2695 /* Total number of statuses processed */ 2696 __le32 status_rcvd; 2697 2698 /* Extra frags on rings 0-3 */ 2699 __le32 r0_frags; 2700 __le32 r1_frags; 2701 __le32 r2_frags; 2702 __le32 r3_frags; 2703 2704 /* MSDUs / MPDUs delivered to HTT */ 2705 __le32 htt_msdus; 2706 __le32 htt_mpdus; 2707 2708 /* MSDUs / MPDUs delivered to local stack */ 2709 __le32 loc_msdus; 2710 __le32 loc_mpdus; 2711 2712 /* AMSDUs that have more MSDUs than the status ring size */ 2713 __le32 oversize_amsdu; 2714 2715 /* Number of PHY errors */ 2716 __le32 phy_errs; 2717 2718 /* Number of PHY errors drops */ 2719 __le32 phy_err_drop; 2720 2721 /* Number of mpdu errors - FCS, MIC, ENC etc. */ 2722 __le32 mpdu_errs; 2723 } __packed; 2724 2725 struct wal_dbg_peer_stats { 2726 /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ 2727 __le32 dummy; 2728 } __packed; 2729 2730 struct wal_dbg_stats { 2731 struct wal_dbg_tx_stats tx; 2732 struct wal_dbg_rx_stats rx; 2733 struct wal_dbg_peer_stats peer; 2734 } __packed; 2735 2736 enum wmi_stats_id { 2737 WMI_REQUEST_PEER_STAT = 0x01, 2738 WMI_REQUEST_AP_STAT = 0x02 2739 }; 2740 2741 struct wmi_request_stats_cmd { 2742 __le32 stats_id; 2743 2744 /* 2745 * Space to add parameters like 2746 * peer mac addr 2747 */ 2748 } __packed; 2749 2750 /* Suspend option */ 2751 enum { 2752 /* suspend */ 2753 WMI_PDEV_SUSPEND, 2754 2755 /* suspend and disable all interrupts */ 2756 WMI_PDEV_SUSPEND_AND_DISABLE_INTR, 2757 }; 2758 2759 struct wmi_pdev_suspend_cmd { 2760 /* suspend option sent to target */ 2761 __le32 suspend_opt; 2762 } __packed; 2763 2764 struct wmi_stats_event { 2765 __le32 stats_id; /* %WMI_REQUEST_ */ 2766 /* 2767 * number of pdev stats event structures 2768 * (wmi_pdev_stats) 0 or 1 2769 */ 2770 __le32 num_pdev_stats; 2771 /* 2772 * number of vdev stats event structures 2773 * (wmi_vdev_stats) 0 or max vdevs 2774 */ 2775 __le32 num_vdev_stats; 2776 /* 2777 * number of peer stats event structures 2778 * (wmi_peer_stats) 0 or max peers 2779 */ 2780 __le32 num_peer_stats; 2781 __le32 num_bcnflt_stats; 2782 /* 2783 * followed by 2784 * num_pdev_stats * size of(struct wmi_pdev_stats) 2785 * num_vdev_stats * size of(struct wmi_vdev_stats) 2786 * num_peer_stats * size of(struct wmi_peer_stats) 2787 * 2788 * By having a zero sized array, the pointer to data area 2789 * becomes available without increasing the struct size 2790 */ 2791 u8 data[0]; 2792 } __packed; 2793 2794 /* 2795 * PDEV statistics 2796 * TODO: add all PDEV stats here 2797 */ 2798 struct wmi_pdev_stats { 2799 __le32 chan_nf; /* Channel noise floor */ 2800 __le32 tx_frame_count; /* TX frame count */ 2801 __le32 rx_frame_count; /* RX frame count */ 2802 __le32 rx_clear_count; /* rx clear count */ 2803 __le32 cycle_count; /* cycle count */ 2804 __le32 phy_err_count; /* Phy error count */ 2805 __le32 chan_tx_pwr; /* channel tx power */ 2806 struct wal_dbg_stats wal; /* WAL dbg stats */ 2807 } __packed; 2808 2809 /* 2810 * VDEV statistics 2811 * TODO: add all VDEV stats here 2812 */ 2813 struct wmi_vdev_stats { 2814 __le32 vdev_id; 2815 } __packed; 2816 2817 /* 2818 * peer statistics. 2819 * TODO: add more stats 2820 */ 2821 struct wmi_peer_stats { 2822 struct wmi_mac_addr peer_macaddr; 2823 __le32 peer_rssi; 2824 __le32 peer_tx_rate; 2825 } __packed; 2826 2827 struct wmi_vdev_create_cmd { 2828 __le32 vdev_id; 2829 __le32 vdev_type; 2830 __le32 vdev_subtype; 2831 struct wmi_mac_addr vdev_macaddr; 2832 } __packed; 2833 2834 enum wmi_vdev_type { 2835 WMI_VDEV_TYPE_AP = 1, 2836 WMI_VDEV_TYPE_STA = 2, 2837 WMI_VDEV_TYPE_IBSS = 3, 2838 WMI_VDEV_TYPE_MONITOR = 4, 2839 }; 2840 2841 enum wmi_vdev_subtype { 2842 WMI_VDEV_SUBTYPE_NONE = 0, 2843 WMI_VDEV_SUBTYPE_P2P_DEVICE = 1, 2844 WMI_VDEV_SUBTYPE_P2P_CLIENT = 2, 2845 WMI_VDEV_SUBTYPE_P2P_GO = 3, 2846 }; 2847 2848 /* values for vdev_subtype */ 2849 2850 /* values for vdev_start_request flags */ 2851 /* 2852 * Indicates that AP VDEV uses hidden ssid. only valid for 2853 * AP/GO */ 2854 #define WMI_VDEV_START_HIDDEN_SSID (1<<0) 2855 /* 2856 * Indicates if robust management frame/management frame 2857 * protection is enabled. For GO/AP vdevs, it indicates that 2858 * it may support station/client associations with RMF enabled. 2859 * For STA/client vdevs, it indicates that sta will 2860 * associate with AP with RMF enabled. */ 2861 #define WMI_VDEV_START_PMF_ENABLED (1<<1) 2862 2863 struct wmi_p2p_noa_descriptor { 2864 __le32 type_count; /* 255: continuous schedule, 0: reserved */ 2865 __le32 duration; /* Absent period duration in micro seconds */ 2866 __le32 interval; /* Absent period interval in micro seconds */ 2867 __le32 start_time; /* 32 bit tsf time when in starts */ 2868 } __packed; 2869 2870 struct wmi_vdev_start_request_cmd { 2871 /* WMI channel */ 2872 struct wmi_channel chan; 2873 /* unique id identifying the VDEV, generated by the caller */ 2874 __le32 vdev_id; 2875 /* requestor id identifying the caller module */ 2876 __le32 requestor_id; 2877 /* beacon interval from received beacon */ 2878 __le32 beacon_interval; 2879 /* DTIM Period from the received beacon */ 2880 __le32 dtim_period; 2881 /* Flags */ 2882 __le32 flags; 2883 /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ 2884 struct wmi_ssid ssid; 2885 /* beacon/probe reponse xmit rate. Applicable for SoftAP. */ 2886 __le32 bcn_tx_rate; 2887 /* beacon/probe reponse xmit power. Applicable for SoftAP. */ 2888 __le32 bcn_tx_power; 2889 /* number of p2p NOA descriptor(s) from scan entry */ 2890 __le32 num_noa_descriptors; 2891 /* 2892 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID. 2893 * During CAC, Our HW shouldn't ack ditected frames 2894 */ 2895 __le32 disable_hw_ack; 2896 /* actual p2p NOA descriptor from scan entry */ 2897 struct wmi_p2p_noa_descriptor noa_descriptors[2]; 2898 } __packed; 2899 2900 struct wmi_vdev_restart_request_cmd { 2901 struct wmi_vdev_start_request_cmd vdev_start_request_cmd; 2902 } __packed; 2903 2904 struct wmi_vdev_start_request_arg { 2905 u32 vdev_id; 2906 struct wmi_channel_arg channel; 2907 u32 bcn_intval; 2908 u32 dtim_period; 2909 u8 *ssid; 2910 u32 ssid_len; 2911 u32 bcn_tx_rate; 2912 u32 bcn_tx_power; 2913 bool disable_hw_ack; 2914 bool hidden_ssid; 2915 bool pmf_enabled; 2916 }; 2917 2918 struct wmi_vdev_delete_cmd { 2919 /* unique id identifying the VDEV, generated by the caller */ 2920 __le32 vdev_id; 2921 } __packed; 2922 2923 struct wmi_vdev_up_cmd { 2924 __le32 vdev_id; 2925 __le32 vdev_assoc_id; 2926 struct wmi_mac_addr vdev_bssid; 2927 } __packed; 2928 2929 struct wmi_vdev_stop_cmd { 2930 __le32 vdev_id; 2931 } __packed; 2932 2933 struct wmi_vdev_down_cmd { 2934 __le32 vdev_id; 2935 } __packed; 2936 2937 struct wmi_vdev_standby_response_cmd { 2938 /* unique id identifying the VDEV, generated by the caller */ 2939 __le32 vdev_id; 2940 } __packed; 2941 2942 struct wmi_vdev_resume_response_cmd { 2943 /* unique id identifying the VDEV, generated by the caller */ 2944 __le32 vdev_id; 2945 } __packed; 2946 2947 struct wmi_vdev_set_param_cmd { 2948 __le32 vdev_id; 2949 __le32 param_id; 2950 __le32 param_value; 2951 } __packed; 2952 2953 #define WMI_MAX_KEY_INDEX 3 2954 #define WMI_MAX_KEY_LEN 32 2955 2956 #define WMI_KEY_PAIRWISE 0x00 2957 #define WMI_KEY_GROUP 0x01 2958 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */ 2959 2960 struct wmi_key_seq_counter { 2961 __le32 key_seq_counter_l; 2962 __le32 key_seq_counter_h; 2963 } __packed; 2964 2965 #define WMI_CIPHER_NONE 0x0 /* clear key */ 2966 #define WMI_CIPHER_WEP 0x1 2967 #define WMI_CIPHER_TKIP 0x2 2968 #define WMI_CIPHER_AES_OCB 0x3 2969 #define WMI_CIPHER_AES_CCM 0x4 2970 #define WMI_CIPHER_WAPI 0x5 2971 #define WMI_CIPHER_CKIP 0x6 2972 #define WMI_CIPHER_AES_CMAC 0x7 2973 2974 struct wmi_vdev_install_key_cmd { 2975 __le32 vdev_id; 2976 struct wmi_mac_addr peer_macaddr; 2977 __le32 key_idx; 2978 __le32 key_flags; 2979 __le32 key_cipher; /* %WMI_CIPHER_ */ 2980 struct wmi_key_seq_counter key_rsc_counter; 2981 struct wmi_key_seq_counter key_global_rsc_counter; 2982 struct wmi_key_seq_counter key_tsc_counter; 2983 u8 wpi_key_rsc_counter[16]; 2984 u8 wpi_key_tsc_counter[16]; 2985 __le32 key_len; 2986 __le32 key_txmic_len; 2987 __le32 key_rxmic_len; 2988 2989 /* contains key followed by tx mic followed by rx mic */ 2990 u8 key_data[0]; 2991 } __packed; 2992 2993 struct wmi_vdev_install_key_arg { 2994 u32 vdev_id; 2995 const u8 *macaddr; 2996 u32 key_idx; 2997 u32 key_flags; 2998 u32 key_cipher; 2999 u32 key_len; 3000 u32 key_txmic_len; 3001 u32 key_rxmic_len; 3002 const void *key_data; 3003 }; 3004 3005 /* 3006 * vdev fixed rate format: 3007 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_ 3008 * - nss - b5:b4 - ss number (0 mean 1ss) 3009 * - rate_mcs - b3:b0 - as below 3010 * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps, 3011 * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s) 3012 * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps, 3013 * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps 3014 * HT/VHT: MCS index 3015 */ 3016 3017 /* Preamble types to be used with VDEV fixed rate configuration */ 3018 enum wmi_rate_preamble { 3019 WMI_RATE_PREAMBLE_OFDM, 3020 WMI_RATE_PREAMBLE_CCK, 3021 WMI_RATE_PREAMBLE_HT, 3022 WMI_RATE_PREAMBLE_VHT, 3023 }; 3024 3025 /* Value to disable fixed rate setting */ 3026 #define WMI_FIXED_RATE_NONE (0xff) 3027 3028 struct wmi_vdev_param_map { 3029 u32 rts_threshold; 3030 u32 fragmentation_threshold; 3031 u32 beacon_interval; 3032 u32 listen_interval; 3033 u32 multicast_rate; 3034 u32 mgmt_tx_rate; 3035 u32 slot_time; 3036 u32 preamble; 3037 u32 swba_time; 3038 u32 wmi_vdev_stats_update_period; 3039 u32 wmi_vdev_pwrsave_ageout_time; 3040 u32 wmi_vdev_host_swba_interval; 3041 u32 dtim_period; 3042 u32 wmi_vdev_oc_scheduler_air_time_limit; 3043 u32 wds; 3044 u32 atim_window; 3045 u32 bmiss_count_max; 3046 u32 bmiss_first_bcnt; 3047 u32 bmiss_final_bcnt; 3048 u32 feature_wmm; 3049 u32 chwidth; 3050 u32 chextoffset; 3051 u32 disable_htprotection; 3052 u32 sta_quickkickout; 3053 u32 mgmt_rate; 3054 u32 protection_mode; 3055 u32 fixed_rate; 3056 u32 sgi; 3057 u32 ldpc; 3058 u32 tx_stbc; 3059 u32 rx_stbc; 3060 u32 intra_bss_fwd; 3061 u32 def_keyid; 3062 u32 nss; 3063 u32 bcast_data_rate; 3064 u32 mcast_data_rate; 3065 u32 mcast_indicate; 3066 u32 dhcp_indicate; 3067 u32 unknown_dest_indicate; 3068 u32 ap_keepalive_min_idle_inactive_time_secs; 3069 u32 ap_keepalive_max_idle_inactive_time_secs; 3070 u32 ap_keepalive_max_unresponsive_time_secs; 3071 u32 ap_enable_nawds; 3072 u32 mcast2ucast_set; 3073 u32 enable_rtscts; 3074 u32 txbf; 3075 u32 packet_powersave; 3076 u32 drop_unencry; 3077 u32 tx_encap_type; 3078 u32 ap_detect_out_of_sync_sleeping_sta_time_secs; 3079 }; 3080 3081 #define WMI_VDEV_PARAM_UNSUPPORTED 0 3082 3083 /* the definition of different VDEV parameters */ 3084 enum wmi_vdev_param { 3085 /* RTS Threshold */ 3086 WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1, 3087 /* Fragmentation threshold */ 3088 WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 3089 /* beacon interval in TUs */ 3090 WMI_VDEV_PARAM_BEACON_INTERVAL, 3091 /* Listen interval in TUs */ 3092 WMI_VDEV_PARAM_LISTEN_INTERVAL, 3093 /* muticast rate in Mbps */ 3094 WMI_VDEV_PARAM_MULTICAST_RATE, 3095 /* management frame rate in Mbps */ 3096 WMI_VDEV_PARAM_MGMT_TX_RATE, 3097 /* slot time (long vs short) */ 3098 WMI_VDEV_PARAM_SLOT_TIME, 3099 /* preamble (long vs short) */ 3100 WMI_VDEV_PARAM_PREAMBLE, 3101 /* SWBA time (time before tbtt in msec) */ 3102 WMI_VDEV_PARAM_SWBA_TIME, 3103 /* time period for updating VDEV stats */ 3104 WMI_VDEV_STATS_UPDATE_PERIOD, 3105 /* age out time in msec for frames queued for station in power save */ 3106 WMI_VDEV_PWRSAVE_AGEOUT_TIME, 3107 /* 3108 * Host SWBA interval (time in msec before tbtt for SWBA event 3109 * generation). 3110 */ 3111 WMI_VDEV_HOST_SWBA_INTERVAL, 3112 /* DTIM period (specified in units of num beacon intervals) */ 3113 WMI_VDEV_PARAM_DTIM_PERIOD, 3114 /* 3115 * scheduler air time limit for this VDEV. used by off chan 3116 * scheduler. 3117 */ 3118 WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 3119 /* enable/dsiable WDS for this VDEV */ 3120 WMI_VDEV_PARAM_WDS, 3121 /* ATIM Window */ 3122 WMI_VDEV_PARAM_ATIM_WINDOW, 3123 /* BMISS max */ 3124 WMI_VDEV_PARAM_BMISS_COUNT_MAX, 3125 /* BMISS first time */ 3126 WMI_VDEV_PARAM_BMISS_FIRST_BCNT, 3127 /* BMISS final time */ 3128 WMI_VDEV_PARAM_BMISS_FINAL_BCNT, 3129 /* WMM enables/disabled */ 3130 WMI_VDEV_PARAM_FEATURE_WMM, 3131 /* Channel width */ 3132 WMI_VDEV_PARAM_CHWIDTH, 3133 /* Channel Offset */ 3134 WMI_VDEV_PARAM_CHEXTOFFSET, 3135 /* Disable HT Protection */ 3136 WMI_VDEV_PARAM_DISABLE_HTPROTECTION, 3137 /* Quick STA Kickout */ 3138 WMI_VDEV_PARAM_STA_QUICKKICKOUT, 3139 /* Rate to be used with Management frames */ 3140 WMI_VDEV_PARAM_MGMT_RATE, 3141 /* Protection Mode */ 3142 WMI_VDEV_PARAM_PROTECTION_MODE, 3143 /* Fixed rate setting */ 3144 WMI_VDEV_PARAM_FIXED_RATE, 3145 /* Short GI Enable/Disable */ 3146 WMI_VDEV_PARAM_SGI, 3147 /* Enable LDPC */ 3148 WMI_VDEV_PARAM_LDPC, 3149 /* Enable Tx STBC */ 3150 WMI_VDEV_PARAM_TX_STBC, 3151 /* Enable Rx STBC */ 3152 WMI_VDEV_PARAM_RX_STBC, 3153 /* Intra BSS forwarding */ 3154 WMI_VDEV_PARAM_INTRA_BSS_FWD, 3155 /* Setting Default xmit key for Vdev */ 3156 WMI_VDEV_PARAM_DEF_KEYID, 3157 /* NSS width */ 3158 WMI_VDEV_PARAM_NSS, 3159 /* Set the custom rate for the broadcast data frames */ 3160 WMI_VDEV_PARAM_BCAST_DATA_RATE, 3161 /* Set the custom rate (rate-code) for multicast data frames */ 3162 WMI_VDEV_PARAM_MCAST_DATA_RATE, 3163 /* Tx multicast packet indicate Enable/Disable */ 3164 WMI_VDEV_PARAM_MCAST_INDICATE, 3165 /* Tx DHCP packet indicate Enable/Disable */ 3166 WMI_VDEV_PARAM_DHCP_INDICATE, 3167 /* Enable host inspection of Tx unicast packet to unknown destination */ 3168 WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 3169 3170 /* The minimum amount of time AP begins to consider STA inactive */ 3171 WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 3172 3173 /* 3174 * An associated STA is considered inactive when there is no recent 3175 * TX/RX activity and no downlink frames are buffered for it. Once a 3176 * STA exceeds the maximum idle inactive time, the AP will send an 3177 * 802.11 data-null as a keep alive to verify the STA is still 3178 * associated. If the STA does ACK the data-null, or if the data-null 3179 * is buffered and the STA does not retrieve it, the STA will be 3180 * considered unresponsive 3181 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 3182 */ 3183 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 3184 3185 /* 3186 * An associated STA is considered unresponsive if there is no recent 3187 * TX/RX activity and downlink frames are buffered for it. Once a STA 3188 * exceeds the maximum unresponsive time, the AP will send a 3189 * WMI_STA_KICKOUT event to the host so the STA can be deleted. */ 3190 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 3191 3192 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 3193 WMI_VDEV_PARAM_AP_ENABLE_NAWDS, 3194 /* Enable/Disable RTS-CTS */ 3195 WMI_VDEV_PARAM_ENABLE_RTSCTS, 3196 /* Enable TXBFee/er */ 3197 WMI_VDEV_PARAM_TXBF, 3198 3199 /* Set packet power save */ 3200 WMI_VDEV_PARAM_PACKET_POWERSAVE, 3201 3202 /* 3203 * Drops un-encrypted packets if eceived in an encrypted connection 3204 * otherwise forwards to host. 3205 */ 3206 WMI_VDEV_PARAM_DROP_UNENCRY, 3207 3208 /* 3209 * Set the encapsulation type for frames. 3210 */ 3211 WMI_VDEV_PARAM_TX_ENCAP_TYPE, 3212 }; 3213 3214 /* the definition of different VDEV parameters */ 3215 enum wmi_10x_vdev_param { 3216 /* RTS Threshold */ 3217 WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1, 3218 /* Fragmentation threshold */ 3219 WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 3220 /* beacon interval in TUs */ 3221 WMI_10X_VDEV_PARAM_BEACON_INTERVAL, 3222 /* Listen interval in TUs */ 3223 WMI_10X_VDEV_PARAM_LISTEN_INTERVAL, 3224 /* muticast rate in Mbps */ 3225 WMI_10X_VDEV_PARAM_MULTICAST_RATE, 3226 /* management frame rate in Mbps */ 3227 WMI_10X_VDEV_PARAM_MGMT_TX_RATE, 3228 /* slot time (long vs short) */ 3229 WMI_10X_VDEV_PARAM_SLOT_TIME, 3230 /* preamble (long vs short) */ 3231 WMI_10X_VDEV_PARAM_PREAMBLE, 3232 /* SWBA time (time before tbtt in msec) */ 3233 WMI_10X_VDEV_PARAM_SWBA_TIME, 3234 /* time period for updating VDEV stats */ 3235 WMI_10X_VDEV_STATS_UPDATE_PERIOD, 3236 /* age out time in msec for frames queued for station in power save */ 3237 WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME, 3238 /* 3239 * Host SWBA interval (time in msec before tbtt for SWBA event 3240 * generation). 3241 */ 3242 WMI_10X_VDEV_HOST_SWBA_INTERVAL, 3243 /* DTIM period (specified in units of num beacon intervals) */ 3244 WMI_10X_VDEV_PARAM_DTIM_PERIOD, 3245 /* 3246 * scheduler air time limit for this VDEV. used by off chan 3247 * scheduler. 3248 */ 3249 WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 3250 /* enable/dsiable WDS for this VDEV */ 3251 WMI_10X_VDEV_PARAM_WDS, 3252 /* ATIM Window */ 3253 WMI_10X_VDEV_PARAM_ATIM_WINDOW, 3254 /* BMISS max */ 3255 WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX, 3256 /* WMM enables/disabled */ 3257 WMI_10X_VDEV_PARAM_FEATURE_WMM, 3258 /* Channel width */ 3259 WMI_10X_VDEV_PARAM_CHWIDTH, 3260 /* Channel Offset */ 3261 WMI_10X_VDEV_PARAM_CHEXTOFFSET, 3262 /* Disable HT Protection */ 3263 WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION, 3264 /* Quick STA Kickout */ 3265 WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT, 3266 /* Rate to be used with Management frames */ 3267 WMI_10X_VDEV_PARAM_MGMT_RATE, 3268 /* Protection Mode */ 3269 WMI_10X_VDEV_PARAM_PROTECTION_MODE, 3270 /* Fixed rate setting */ 3271 WMI_10X_VDEV_PARAM_FIXED_RATE, 3272 /* Short GI Enable/Disable */ 3273 WMI_10X_VDEV_PARAM_SGI, 3274 /* Enable LDPC */ 3275 WMI_10X_VDEV_PARAM_LDPC, 3276 /* Enable Tx STBC */ 3277 WMI_10X_VDEV_PARAM_TX_STBC, 3278 /* Enable Rx STBC */ 3279 WMI_10X_VDEV_PARAM_RX_STBC, 3280 /* Intra BSS forwarding */ 3281 WMI_10X_VDEV_PARAM_INTRA_BSS_FWD, 3282 /* Setting Default xmit key for Vdev */ 3283 WMI_10X_VDEV_PARAM_DEF_KEYID, 3284 /* NSS width */ 3285 WMI_10X_VDEV_PARAM_NSS, 3286 /* Set the custom rate for the broadcast data frames */ 3287 WMI_10X_VDEV_PARAM_BCAST_DATA_RATE, 3288 /* Set the custom rate (rate-code) for multicast data frames */ 3289 WMI_10X_VDEV_PARAM_MCAST_DATA_RATE, 3290 /* Tx multicast packet indicate Enable/Disable */ 3291 WMI_10X_VDEV_PARAM_MCAST_INDICATE, 3292 /* Tx DHCP packet indicate Enable/Disable */ 3293 WMI_10X_VDEV_PARAM_DHCP_INDICATE, 3294 /* Enable host inspection of Tx unicast packet to unknown destination */ 3295 WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 3296 3297 /* The minimum amount of time AP begins to consider STA inactive */ 3298 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 3299 3300 /* 3301 * An associated STA is considered inactive when there is no recent 3302 * TX/RX activity and no downlink frames are buffered for it. Once a 3303 * STA exceeds the maximum idle inactive time, the AP will send an 3304 * 802.11 data-null as a keep alive to verify the STA is still 3305 * associated. If the STA does ACK the data-null, or if the data-null 3306 * is buffered and the STA does not retrieve it, the STA will be 3307 * considered unresponsive 3308 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 3309 */ 3310 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 3311 3312 /* 3313 * An associated STA is considered unresponsive if there is no recent 3314 * TX/RX activity and downlink frames are buffered for it. Once a STA 3315 * exceeds the maximum unresponsive time, the AP will send a 3316 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. */ 3317 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 3318 3319 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 3320 WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS, 3321 3322 WMI_10X_VDEV_PARAM_MCAST2UCAST_SET, 3323 /* Enable/Disable RTS-CTS */ 3324 WMI_10X_VDEV_PARAM_ENABLE_RTSCTS, 3325 3326 WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 3327 }; 3328 3329 /* slot time long */ 3330 #define WMI_VDEV_SLOT_TIME_LONG 0x1 3331 /* slot time short */ 3332 #define WMI_VDEV_SLOT_TIME_SHORT 0x2 3333 /* preablbe long */ 3334 #define WMI_VDEV_PREAMBLE_LONG 0x1 3335 /* preablbe short */ 3336 #define WMI_VDEV_PREAMBLE_SHORT 0x2 3337 3338 enum wmi_start_event_param { 3339 WMI_VDEV_RESP_START_EVENT = 0, 3340 WMI_VDEV_RESP_RESTART_EVENT, 3341 }; 3342 3343 struct wmi_vdev_start_response_event { 3344 __le32 vdev_id; 3345 __le32 req_id; 3346 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 3347 __le32 status; 3348 } __packed; 3349 3350 struct wmi_vdev_standby_req_event { 3351 /* unique id identifying the VDEV, generated by the caller */ 3352 __le32 vdev_id; 3353 } __packed; 3354 3355 struct wmi_vdev_resume_req_event { 3356 /* unique id identifying the VDEV, generated by the caller */ 3357 __le32 vdev_id; 3358 } __packed; 3359 3360 struct wmi_vdev_stopped_event { 3361 /* unique id identifying the VDEV, generated by the caller */ 3362 __le32 vdev_id; 3363 } __packed; 3364 3365 /* 3366 * common structure used for simple events 3367 * (stopped, resume_req, standby response) 3368 */ 3369 struct wmi_vdev_simple_event { 3370 /* unique id identifying the VDEV, generated by the caller */ 3371 __le32 vdev_id; 3372 } __packed; 3373 3374 /* VDEV start response status codes */ 3375 /* VDEV succesfully started */ 3376 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 3377 3378 /* requested VDEV not found */ 3379 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1 3380 3381 /* unsupported VDEV combination */ 3382 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2 3383 3384 /* Beacon processing related command and event structures */ 3385 struct wmi_bcn_tx_hdr { 3386 __le32 vdev_id; 3387 __le32 tx_rate; 3388 __le32 tx_power; 3389 __le32 bcn_len; 3390 } __packed; 3391 3392 struct wmi_bcn_tx_cmd { 3393 struct wmi_bcn_tx_hdr hdr; 3394 u8 *bcn[0]; 3395 } __packed; 3396 3397 struct wmi_bcn_tx_arg { 3398 u32 vdev_id; 3399 u32 tx_rate; 3400 u32 tx_power; 3401 u32 bcn_len; 3402 const void *bcn; 3403 }; 3404 3405 enum wmi_bcn_tx_ref_flags { 3406 WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1, 3407 WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2, 3408 }; 3409 3410 struct wmi_bcn_tx_ref_cmd { 3411 __le32 vdev_id; 3412 __le32 data_len; 3413 /* physical address of the frame - dma pointer */ 3414 __le32 data_ptr; 3415 /* id for host to track */ 3416 __le32 msdu_id; 3417 /* frame ctrl to setup PPDU desc */ 3418 __le32 frame_control; 3419 /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */ 3420 __le32 flags; 3421 } __packed; 3422 3423 /* Beacon filter */ 3424 #define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */ 3425 #define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */ 3426 #define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */ 3427 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */ 3428 #define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */ 3429 3430 struct wmi_bcn_filter_rx_cmd { 3431 /* Filter ID */ 3432 __le32 bcn_filter_id; 3433 /* Filter type - wmi_bcn_filter */ 3434 __le32 bcn_filter; 3435 /* Buffer len */ 3436 __le32 bcn_filter_len; 3437 /* Filter info (threshold, BSSID, RSSI) */ 3438 u8 *bcn_filter_buf; 3439 } __packed; 3440 3441 /* Capabilities and IEs to be passed to firmware */ 3442 struct wmi_bcn_prb_info { 3443 /* Capabilities */ 3444 __le32 caps; 3445 /* ERP info */ 3446 __le32 erp; 3447 /* Advanced capabilities */ 3448 /* HT capabilities */ 3449 /* HT Info */ 3450 /* ibss_dfs */ 3451 /* wpa Info */ 3452 /* rsn Info */ 3453 /* rrm info */ 3454 /* ath_ext */ 3455 /* app IE */ 3456 } __packed; 3457 3458 struct wmi_bcn_tmpl_cmd { 3459 /* unique id identifying the VDEV, generated by the caller */ 3460 __le32 vdev_id; 3461 /* TIM IE offset from the beginning of the template. */ 3462 __le32 tim_ie_offset; 3463 /* beacon probe capabilities and IEs */ 3464 struct wmi_bcn_prb_info bcn_prb_info; 3465 /* beacon buffer length */ 3466 __le32 buf_len; 3467 /* variable length data */ 3468 u8 data[1]; 3469 } __packed; 3470 3471 struct wmi_prb_tmpl_cmd { 3472 /* unique id identifying the VDEV, generated by the caller */ 3473 __le32 vdev_id; 3474 /* beacon probe capabilities and IEs */ 3475 struct wmi_bcn_prb_info bcn_prb_info; 3476 /* beacon buffer length */ 3477 __le32 buf_len; 3478 /* Variable length data */ 3479 u8 data[1]; 3480 } __packed; 3481 3482 enum wmi_sta_ps_mode { 3483 /* enable power save for the given STA VDEV */ 3484 WMI_STA_PS_MODE_DISABLED = 0, 3485 /* disable power save for a given STA VDEV */ 3486 WMI_STA_PS_MODE_ENABLED = 1, 3487 }; 3488 3489 struct wmi_sta_powersave_mode_cmd { 3490 /* unique id identifying the VDEV, generated by the caller */ 3491 __le32 vdev_id; 3492 3493 /* 3494 * Power save mode 3495 * (see enum wmi_sta_ps_mode) 3496 */ 3497 __le32 sta_ps_mode; 3498 } __packed; 3499 3500 enum wmi_csa_offload_en { 3501 WMI_CSA_OFFLOAD_DISABLE = 0, 3502 WMI_CSA_OFFLOAD_ENABLE = 1, 3503 }; 3504 3505 struct wmi_csa_offload_enable_cmd { 3506 __le32 vdev_id; 3507 __le32 csa_offload_enable; 3508 } __packed; 3509 3510 struct wmi_csa_offload_chanswitch_cmd { 3511 __le32 vdev_id; 3512 struct wmi_channel chan; 3513 } __packed; 3514 3515 /* 3516 * This parameter controls the policy for retrieving frames from AP while the 3517 * STA is in sleep state. 3518 * 3519 * Only takes affect if the sta_ps_mode is enabled 3520 */ 3521 enum wmi_sta_ps_param_rx_wake_policy { 3522 /* 3523 * Wake up when ever there is an RX activity on the VDEV. In this mode 3524 * the Power save SM(state machine) will come out of sleep by either 3525 * sending null frame (or) a data frame (with PS==0) in response to TIM 3526 * bit set in the received beacon frame from AP. 3527 */ 3528 WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0, 3529 3530 /* 3531 * Here the power save state machine will not wakeup in response to TIM 3532 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD 3533 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all 3534 * access categories are delivery-enabled, the station will send a 3535 * UAPSD trigger frame, otherwise it will send a PS-Poll. 3536 */ 3537 WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, 3538 }; 3539 3540 /* 3541 * Number of tx frames/beacon that cause the power save SM to wake up. 3542 * 3543 * Value 1 causes the SM to wake up for every TX. Value 0 has a special 3544 * meaning, It will cause the SM to never wake up. This is useful if you want 3545 * to keep the system to sleep all the time for some kind of test mode . host 3546 * can change this parameter any time. It will affect at the next tx frame. 3547 */ 3548 enum wmi_sta_ps_param_tx_wake_threshold { 3549 WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, 3550 WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, 3551 3552 /* 3553 * Values greater than one indicate that many TX attempts per beacon 3554 * interval before the STA will wake up 3555 */ 3556 }; 3557 3558 /* 3559 * The maximum number of PS-Poll frames the FW will send in response to 3560 * traffic advertised in TIM before waking up (by sending a null frame with PS 3561 * = 0). Value 0 has a special meaning: there is no maximum count and the FW 3562 * will send as many PS-Poll as are necessary to retrieve buffered BU. This 3563 * parameter is used when the RX wake policy is 3564 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake 3565 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE. 3566 */ 3567 enum wmi_sta_ps_param_pspoll_count { 3568 WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0, 3569 /* 3570 * Values greater than 0 indicate the maximum numer of PS-Poll frames 3571 * FW will send before waking up. 3572 */ 3573 }; 3574 3575 /* 3576 * This will include the delivery and trigger enabled state for every AC. 3577 * This is the negotiated state with AP. The host MLME needs to set this based 3578 * on AP capability and the state Set in the association request by the 3579 * station MLME.Lower 8 bits of the value specify the UAPSD configuration. 3580 */ 3581 #define WMI_UAPSD_AC_TYPE_DELI 0 3582 #define WMI_UAPSD_AC_TYPE_TRIG 1 3583 3584 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \ 3585 ((type == WMI_UAPSD_AC_TYPE_DELI) ? (1<<(ac<<1)) : (1<<((ac<<1)+1))) 3586 3587 enum wmi_sta_ps_param_uapsd { 3588 WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 3589 WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 3590 WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 3591 WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 3592 WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 3593 WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 3594 WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 3595 WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 3596 }; 3597 3598 enum wmi_sta_powersave_param { 3599 /* 3600 * Controls how frames are retrievd from AP while STA is sleeping 3601 * 3602 * (see enum wmi_sta_ps_param_rx_wake_policy) 3603 */ 3604 WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0, 3605 3606 /* 3607 * The STA will go active after this many TX 3608 * 3609 * (see enum wmi_sta_ps_param_tx_wake_threshold) 3610 */ 3611 WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, 3612 3613 /* 3614 * Number of PS-Poll to send before STA wakes up 3615 * 3616 * (see enum wmi_sta_ps_param_pspoll_count) 3617 * 3618 */ 3619 WMI_STA_PS_PARAM_PSPOLL_COUNT = 2, 3620 3621 /* 3622 * TX/RX inactivity time in msec before going to sleep. 3623 * 3624 * The power save SM will monitor tx/rx activity on the VDEV, if no 3625 * activity for the specified msec of the parameter the Power save 3626 * SM will go to sleep. 3627 */ 3628 WMI_STA_PS_PARAM_INACTIVITY_TIME = 3, 3629 3630 /* 3631 * Set uapsd configuration. 3632 * 3633 * (see enum wmi_sta_ps_param_uapsd) 3634 */ 3635 WMI_STA_PS_PARAM_UAPSD = 4, 3636 }; 3637 3638 struct wmi_sta_powersave_param_cmd { 3639 __le32 vdev_id; 3640 __le32 param_id; /* %WMI_STA_PS_PARAM_ */ 3641 __le32 param_value; 3642 } __packed; 3643 3644 /* No MIMO power save */ 3645 #define WMI_STA_MIMO_PS_MODE_DISABLE 3646 /* mimo powersave mode static*/ 3647 #define WMI_STA_MIMO_PS_MODE_STATIC 3648 /* mimo powersave mode dynamic */ 3649 #define WMI_STA_MIMO_PS_MODE_DYNAMIC 3650 3651 struct wmi_sta_mimo_ps_mode_cmd { 3652 /* unique id identifying the VDEV, generated by the caller */ 3653 __le32 vdev_id; 3654 /* mimo powersave mode as defined above */ 3655 __le32 mimo_pwrsave_mode; 3656 } __packed; 3657 3658 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */ 3659 enum wmi_ap_ps_param_uapsd { 3660 WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 3661 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 3662 WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 3663 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 3664 WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 3665 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 3666 WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 3667 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 3668 }; 3669 3670 /* U-APSD maximum service period of peer station */ 3671 enum wmi_ap_ps_peer_param_max_sp { 3672 WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, 3673 WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1, 3674 WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2, 3675 WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3, 3676 MAX_WMI_AP_PS_PEER_PARAM_MAX_SP, 3677 }; 3678 3679 /* 3680 * AP power save parameter 3681 * Set a power save specific parameter for a peer station 3682 */ 3683 enum wmi_ap_ps_peer_param { 3684 /* Set uapsd configuration for a given peer. 3685 * 3686 * Include the delivery and trigger enabled state for every AC. 3687 * The host MLME needs to set this based on AP capability and stations 3688 * request Set in the association request received from the station. 3689 * 3690 * Lower 8 bits of the value specify the UAPSD configuration. 3691 * 3692 * (see enum wmi_ap_ps_param_uapsd) 3693 * The default value is 0. 3694 */ 3695 WMI_AP_PS_PEER_PARAM_UAPSD = 0, 3696 3697 /* 3698 * Set the service period for a UAPSD capable station 3699 * 3700 * The service period from wme ie in the (re)assoc request frame. 3701 * 3702 * (see enum wmi_ap_ps_peer_param_max_sp) 3703 */ 3704 WMI_AP_PS_PEER_PARAM_MAX_SP = 1, 3705 3706 /* Time in seconds for aging out buffered frames for STA in PS */ 3707 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, 3708 }; 3709 3710 struct wmi_ap_ps_peer_cmd { 3711 /* unique id identifying the VDEV, generated by the caller */ 3712 __le32 vdev_id; 3713 3714 /* peer MAC address */ 3715 struct wmi_mac_addr peer_macaddr; 3716 3717 /* AP powersave param (see enum wmi_ap_ps_peer_param) */ 3718 __le32 param_id; 3719 3720 /* AP powersave param value */ 3721 __le32 param_value; 3722 } __packed; 3723 3724 /* 128 clients = 4 words */ 3725 #define WMI_TIM_BITMAP_ARRAY_SIZE 4 3726 3727 struct wmi_tim_info { 3728 __le32 tim_len; 3729 __le32 tim_mcast; 3730 __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE]; 3731 __le32 tim_changed; 3732 __le32 tim_num_ps_pending; 3733 } __packed; 3734 3735 /* Maximum number of NOA Descriptors supported */ 3736 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4 3737 #define WMI_P2P_OPPPS_ENABLE_BIT BIT(0) 3738 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1 3739 #define WMI_P2P_NOA_CHANGED_BIT BIT(0) 3740 3741 struct wmi_p2p_noa_info { 3742 /* Bit 0 - Flag to indicate an update in NOA schedule 3743 Bits 7-1 - Reserved */ 3744 u8 changed; 3745 /* NOA index */ 3746 u8 index; 3747 /* Bit 0 - Opp PS state of the AP 3748 Bits 1-7 - Ctwindow in TUs */ 3749 u8 ctwindow_oppps; 3750 /* Number of NOA descriptors */ 3751 u8 num_descriptors; 3752 3753 struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS]; 3754 } __packed; 3755 3756 struct wmi_bcn_info { 3757 struct wmi_tim_info tim_info; 3758 struct wmi_p2p_noa_info p2p_noa_info; 3759 } __packed; 3760 3761 struct wmi_host_swba_event { 3762 __le32 vdev_map; 3763 struct wmi_bcn_info bcn_info[1]; 3764 } __packed; 3765 3766 #define WMI_MAX_AP_VDEV 16 3767 3768 struct wmi_tbtt_offset_event { 3769 __le32 vdev_map; 3770 __le32 tbttoffset_list[WMI_MAX_AP_VDEV]; 3771 } __packed; 3772 3773 3774 struct wmi_peer_create_cmd { 3775 __le32 vdev_id; 3776 struct wmi_mac_addr peer_macaddr; 3777 } __packed; 3778 3779 struct wmi_peer_delete_cmd { 3780 __le32 vdev_id; 3781 struct wmi_mac_addr peer_macaddr; 3782 } __packed; 3783 3784 struct wmi_peer_flush_tids_cmd { 3785 __le32 vdev_id; 3786 struct wmi_mac_addr peer_macaddr; 3787 __le32 peer_tid_bitmap; 3788 } __packed; 3789 3790 struct wmi_fixed_rate { 3791 /* 3792 * rate mode . 0: disable fixed rate (auto rate) 3793 * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps 3794 * 2: ht20 11n rate specified as mcs index 3795 * 3: ht40 11n rate specified as mcs index 3796 */ 3797 __le32 rate_mode; 3798 /* 3799 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB) 3800 * and series 3 is stored at byte 3 (MSB) 3801 */ 3802 __le32 rate_series; 3803 /* 3804 * 4 retry counts for 4 rate series. retry count for rate 0 is stored 3805 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3 3806 * (MSB) 3807 */ 3808 __le32 rate_retries; 3809 } __packed; 3810 3811 struct wmi_peer_fixed_rate_cmd { 3812 /* unique id identifying the VDEV, generated by the caller */ 3813 __le32 vdev_id; 3814 /* peer MAC address */ 3815 struct wmi_mac_addr peer_macaddr; 3816 /* fixed rate */ 3817 struct wmi_fixed_rate peer_fixed_rate; 3818 } __packed; 3819 3820 #define WMI_MGMT_TID 17 3821 3822 struct wmi_addba_clear_resp_cmd { 3823 /* unique id identifying the VDEV, generated by the caller */ 3824 __le32 vdev_id; 3825 /* peer MAC address */ 3826 struct wmi_mac_addr peer_macaddr; 3827 } __packed; 3828 3829 struct wmi_addba_send_cmd { 3830 /* unique id identifying the VDEV, generated by the caller */ 3831 __le32 vdev_id; 3832 /* peer MAC address */ 3833 struct wmi_mac_addr peer_macaddr; 3834 /* Tid number */ 3835 __le32 tid; 3836 /* Buffer/Window size*/ 3837 __le32 buffersize; 3838 } __packed; 3839 3840 struct wmi_delba_send_cmd { 3841 /* unique id identifying the VDEV, generated by the caller */ 3842 __le32 vdev_id; 3843 /* peer MAC address */ 3844 struct wmi_mac_addr peer_macaddr; 3845 /* Tid number */ 3846 __le32 tid; 3847 /* Is Initiator */ 3848 __le32 initiator; 3849 /* Reason code */ 3850 __le32 reasoncode; 3851 } __packed; 3852 3853 struct wmi_addba_setresponse_cmd { 3854 /* unique id identifying the vdev, generated by the caller */ 3855 __le32 vdev_id; 3856 /* peer mac address */ 3857 struct wmi_mac_addr peer_macaddr; 3858 /* Tid number */ 3859 __le32 tid; 3860 /* status code */ 3861 __le32 statuscode; 3862 } __packed; 3863 3864 struct wmi_send_singleamsdu_cmd { 3865 /* unique id identifying the vdev, generated by the caller */ 3866 __le32 vdev_id; 3867 /* peer mac address */ 3868 struct wmi_mac_addr peer_macaddr; 3869 /* Tid number */ 3870 __le32 tid; 3871 } __packed; 3872 3873 enum wmi_peer_smps_state { 3874 WMI_PEER_SMPS_PS_NONE = 0x0, 3875 WMI_PEER_SMPS_STATIC = 0x1, 3876 WMI_PEER_SMPS_DYNAMIC = 0x2 3877 }; 3878 3879 enum wmi_peer_chwidth { 3880 WMI_PEER_CHWIDTH_20MHZ = 0, 3881 WMI_PEER_CHWIDTH_40MHZ = 1, 3882 WMI_PEER_CHWIDTH_80MHZ = 2, 3883 }; 3884 3885 enum wmi_peer_param { 3886 WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */ 3887 WMI_PEER_AMPDU = 0x2, 3888 WMI_PEER_AUTHORIZE = 0x3, 3889 WMI_PEER_CHAN_WIDTH = 0x4, 3890 WMI_PEER_NSS = 0x5, 3891 WMI_PEER_USE_4ADDR = 0x6 3892 }; 3893 3894 struct wmi_peer_set_param_cmd { 3895 __le32 vdev_id; 3896 struct wmi_mac_addr peer_macaddr; 3897 __le32 param_id; 3898 __le32 param_value; 3899 } __packed; 3900 3901 #define MAX_SUPPORTED_RATES 128 3902 3903 struct wmi_rate_set { 3904 /* total number of rates */ 3905 __le32 num_rates; 3906 /* 3907 * rates (each 8bit value) packed into a 32 bit word. 3908 * the rates are filled from least significant byte to most 3909 * significant byte. 3910 */ 3911 __le32 rates[(MAX_SUPPORTED_RATES/4)+1]; 3912 } __packed; 3913 3914 struct wmi_rate_set_arg { 3915 unsigned int num_rates; 3916 u8 rates[MAX_SUPPORTED_RATES]; 3917 }; 3918 3919 /* 3920 * NOTE: It would bea good idea to represent the Tx MCS 3921 * info in one word and Rx in another word. This is split 3922 * into multiple words for convenience 3923 */ 3924 struct wmi_vht_rate_set { 3925 __le32 rx_max_rate; /* Max Rx data rate */ 3926 __le32 rx_mcs_set; /* Negotiated RX VHT rates */ 3927 __le32 tx_max_rate; /* Max Tx data rate */ 3928 __le32 tx_mcs_set; /* Negotiated TX VHT rates */ 3929 } __packed; 3930 3931 struct wmi_vht_rate_set_arg { 3932 u32 rx_max_rate; 3933 u32 rx_mcs_set; 3934 u32 tx_max_rate; 3935 u32 tx_mcs_set; 3936 }; 3937 3938 struct wmi_peer_set_rates_cmd { 3939 /* peer MAC address */ 3940 struct wmi_mac_addr peer_macaddr; 3941 /* legacy rate set */ 3942 struct wmi_rate_set peer_legacy_rates; 3943 /* ht rate set */ 3944 struct wmi_rate_set peer_ht_rates; 3945 } __packed; 3946 3947 struct wmi_peer_set_q_empty_callback_cmd { 3948 /* unique id identifying the VDEV, generated by the caller */ 3949 __le32 vdev_id; 3950 /* peer MAC address */ 3951 struct wmi_mac_addr peer_macaddr; 3952 __le32 callback_enable; 3953 } __packed; 3954 3955 #define WMI_PEER_AUTH 0x00000001 3956 #define WMI_PEER_QOS 0x00000002 3957 #define WMI_PEER_NEED_PTK_4_WAY 0x00000004 3958 #define WMI_PEER_NEED_GTK_2_WAY 0x00000010 3959 #define WMI_PEER_APSD 0x00000800 3960 #define WMI_PEER_HT 0x00001000 3961 #define WMI_PEER_40MHZ 0x00002000 3962 #define WMI_PEER_STBC 0x00008000 3963 #define WMI_PEER_LDPC 0x00010000 3964 #define WMI_PEER_DYN_MIMOPS 0x00020000 3965 #define WMI_PEER_STATIC_MIMOPS 0x00040000 3966 #define WMI_PEER_SPATIAL_MUX 0x00200000 3967 #define WMI_PEER_VHT 0x02000000 3968 #define WMI_PEER_80MHZ 0x04000000 3969 #define WMI_PEER_PMF 0x08000000 3970 3971 /* 3972 * Peer rate capabilities. 3973 * 3974 * This is of interest to the ratecontrol 3975 * module which resides in the firmware. The bit definitions are 3976 * consistent with that defined in if_athrate.c. 3977 */ 3978 #define WMI_RC_DS_FLAG 0x01 3979 #define WMI_RC_CW40_FLAG 0x02 3980 #define WMI_RC_SGI_FLAG 0x04 3981 #define WMI_RC_HT_FLAG 0x08 3982 #define WMI_RC_RTSCTS_FLAG 0x10 3983 #define WMI_RC_TX_STBC_FLAG 0x20 3984 #define WMI_RC_RX_STBC_FLAG 0xC0 3985 #define WMI_RC_RX_STBC_FLAG_S 6 3986 #define WMI_RC_WEP_TKIP_FLAG 0x100 3987 #define WMI_RC_TS_FLAG 0x200 3988 #define WMI_RC_UAPSD_FLAG 0x400 3989 3990 /* Maximum listen interval supported by hw in units of beacon interval */ 3991 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5 3992 3993 struct wmi_peer_assoc_complete_cmd { 3994 struct wmi_mac_addr peer_macaddr; 3995 __le32 vdev_id; 3996 __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */ 3997 __le32 peer_associd; /* 16 LSBs */ 3998 __le32 peer_flags; 3999 __le32 peer_caps; /* 16 LSBs */ 4000 __le32 peer_listen_intval; 4001 __le32 peer_ht_caps; 4002 __le32 peer_max_mpdu; 4003 __le32 peer_mpdu_density; /* 0..16 */ 4004 __le32 peer_rate_caps; 4005 struct wmi_rate_set peer_legacy_rates; 4006 struct wmi_rate_set peer_ht_rates; 4007 __le32 peer_nss; /* num of spatial streams */ 4008 __le32 peer_vht_caps; 4009 __le32 peer_phymode; 4010 struct wmi_vht_rate_set peer_vht_rates; 4011 /* HT Operation Element of the peer. Five bytes packed in 2 4012 * INT32 array and filled from lsb to msb. */ 4013 __le32 peer_ht_info[2]; 4014 } __packed; 4015 4016 struct wmi_peer_assoc_complete_arg { 4017 u8 addr[ETH_ALEN]; 4018 u32 vdev_id; 4019 bool peer_reassoc; 4020 u16 peer_aid; 4021 u32 peer_flags; /* see %WMI_PEER_ */ 4022 u16 peer_caps; 4023 u32 peer_listen_intval; 4024 u32 peer_ht_caps; 4025 u32 peer_max_mpdu; 4026 u32 peer_mpdu_density; /* 0..16 */ 4027 u32 peer_rate_caps; /* see %WMI_RC_ */ 4028 struct wmi_rate_set_arg peer_legacy_rates; 4029 struct wmi_rate_set_arg peer_ht_rates; 4030 u32 peer_num_spatial_streams; 4031 u32 peer_vht_caps; 4032 enum wmi_phy_mode peer_phymode; 4033 struct wmi_vht_rate_set_arg peer_vht_rates; 4034 }; 4035 4036 struct wmi_peer_add_wds_entry_cmd { 4037 /* peer MAC address */ 4038 struct wmi_mac_addr peer_macaddr; 4039 /* wds MAC addr */ 4040 struct wmi_mac_addr wds_macaddr; 4041 } __packed; 4042 4043 struct wmi_peer_remove_wds_entry_cmd { 4044 /* wds MAC addr */ 4045 struct wmi_mac_addr wds_macaddr; 4046 } __packed; 4047 4048 struct wmi_peer_q_empty_callback_event { 4049 /* peer MAC address */ 4050 struct wmi_mac_addr peer_macaddr; 4051 } __packed; 4052 4053 /* 4054 * Channel info WMI event 4055 */ 4056 struct wmi_chan_info_event { 4057 __le32 err_code; 4058 __le32 freq; 4059 __le32 cmd_flags; 4060 __le32 noise_floor; 4061 __le32 rx_clear_count; 4062 __le32 cycle_count; 4063 } __packed; 4064 4065 struct wmi_peer_sta_kickout_event { 4066 struct wmi_mac_addr peer_macaddr; 4067 } __packed; 4068 4069 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0) 4070 4071 /* FIXME: empirically extrapolated */ 4072 #define WMI_CHAN_INFO_MSEC(x) ((x) / 76595) 4073 4074 /* Beacon filter wmi command info */ 4075 #define BCN_FLT_MAX_SUPPORTED_IES 256 4076 #define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32) 4077 4078 struct bss_bcn_stats { 4079 __le32 vdev_id; 4080 __le32 bss_bcnsdropped; 4081 __le32 bss_bcnsdelivered; 4082 } __packed; 4083 4084 struct bcn_filter_stats { 4085 __le32 bcns_dropped; 4086 __le32 bcns_delivered; 4087 __le32 activefilters; 4088 struct bss_bcn_stats bss_stats; 4089 } __packed; 4090 4091 struct wmi_add_bcn_filter_cmd { 4092 u32 vdev_id; 4093 u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST]; 4094 } __packed; 4095 4096 enum wmi_sta_keepalive_method { 4097 WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1, 4098 WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2, 4099 }; 4100 4101 /* note: ip4 addresses are in network byte order, i.e. big endian */ 4102 struct wmi_sta_keepalive_arp_resp { 4103 __be32 src_ip4_addr; 4104 __be32 dest_ip4_addr; 4105 struct wmi_mac_addr dest_mac_addr; 4106 } __packed; 4107 4108 struct wmi_sta_keepalive_cmd { 4109 __le32 vdev_id; 4110 __le32 enabled; 4111 __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */ 4112 __le32 interval; /* in seconds */ 4113 struct wmi_sta_keepalive_arp_resp arp_resp; 4114 } __packed; 4115 4116 enum wmi_force_fw_hang_type { 4117 WMI_FORCE_FW_HANG_ASSERT = 1, 4118 WMI_FORCE_FW_HANG_NO_DETECT, 4119 WMI_FORCE_FW_HANG_CTRL_EP_FULL, 4120 WMI_FORCE_FW_HANG_EMPTY_POINT, 4121 WMI_FORCE_FW_HANG_STACK_OVERFLOW, 4122 WMI_FORCE_FW_HANG_INFINITE_LOOP, 4123 }; 4124 4125 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF 4126 4127 struct wmi_force_fw_hang_cmd { 4128 __le32 type; 4129 __le32 delay_ms; 4130 } __packed; 4131 4132 enum ath10k_dbglog_level { 4133 ATH10K_DBGLOG_LEVEL_VERBOSE = 0, 4134 ATH10K_DBGLOG_LEVEL_INFO = 1, 4135 ATH10K_DBGLOG_LEVEL_WARN = 2, 4136 ATH10K_DBGLOG_LEVEL_ERR = 3, 4137 }; 4138 4139 /* VAP ids to enable dbglog */ 4140 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0 4141 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff 4142 4143 /* to enable dbglog in the firmware */ 4144 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16 4145 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000 4146 4147 /* timestamp resolution */ 4148 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17 4149 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000 4150 4151 /* number of queued messages before sending them to the host */ 4152 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20 4153 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000 4154 4155 /* 4156 * Log levels to enable. This defines the minimum level to enable, this is 4157 * not a bitmask. See enum ath10k_dbglog_level for the values. 4158 */ 4159 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28 4160 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000 4161 4162 /* 4163 * Note: this is a cleaned up version of a struct firmware uses. For 4164 * example, config_valid was hidden inside an array. 4165 */ 4166 struct wmi_dbglog_cfg_cmd { 4167 /* bitmask to hold mod id config*/ 4168 __le32 module_enable; 4169 4170 /* see ATH10K_DBGLOG_CFG_ */ 4171 __le32 config_enable; 4172 4173 /* mask of module id bits to be changed */ 4174 __le32 module_valid; 4175 4176 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 4177 __le32 config_valid; 4178 } __packed; 4179 4180 #define ATH10K_RTS_MAX 2347 4181 #define ATH10K_FRAGMT_THRESHOLD_MIN 540 4182 #define ATH10K_FRAGMT_THRESHOLD_MAX 2346 4183 4184 #define WMI_MAX_EVENT 0x1000 4185 /* Maximum number of pending TXed WMI packets */ 4186 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr) 4187 4188 /* By default disable power save for IBSS */ 4189 #define ATH10K_DEFAULT_ATIM 0 4190 4191 struct ath10k; 4192 struct ath10k_vif; 4193 4194 int ath10k_wmi_attach(struct ath10k *ar); 4195 void ath10k_wmi_detach(struct ath10k *ar); 4196 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar); 4197 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar); 4198 4199 int ath10k_wmi_connect_htc_service(struct ath10k *ar); 4200 int ath10k_wmi_pdev_set_channel(struct ath10k *ar, 4201 const struct wmi_channel_arg *); 4202 int ath10k_wmi_pdev_suspend_target(struct ath10k *ar, u32 suspend_opt); 4203 int ath10k_wmi_pdev_resume_target(struct ath10k *ar); 4204 int ath10k_wmi_pdev_set_regdomain(struct ath10k *ar, u16 rd, u16 rd2g, 4205 u16 rd5g, u16 ctl2g, u16 ctl5g); 4206 int ath10k_wmi_pdev_set_param(struct ath10k *ar, u32 id, u32 value); 4207 int ath10k_wmi_cmd_init(struct ath10k *ar); 4208 int ath10k_wmi_start_scan(struct ath10k *ar, const struct wmi_start_scan_arg *); 4209 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *); 4210 int ath10k_wmi_stop_scan(struct ath10k *ar, 4211 const struct wmi_stop_scan_arg *arg); 4212 int ath10k_wmi_vdev_create(struct ath10k *ar, u32 vdev_id, 4213 enum wmi_vdev_type type, 4214 enum wmi_vdev_subtype subtype, 4215 const u8 macaddr[ETH_ALEN]); 4216 int ath10k_wmi_vdev_delete(struct ath10k *ar, u32 vdev_id); 4217 int ath10k_wmi_vdev_start(struct ath10k *ar, 4218 const struct wmi_vdev_start_request_arg *); 4219 int ath10k_wmi_vdev_restart(struct ath10k *ar, 4220 const struct wmi_vdev_start_request_arg *); 4221 int ath10k_wmi_vdev_stop(struct ath10k *ar, u32 vdev_id); 4222 int ath10k_wmi_vdev_up(struct ath10k *ar, u32 vdev_id, u32 aid, 4223 const u8 *bssid); 4224 int ath10k_wmi_vdev_down(struct ath10k *ar, u32 vdev_id); 4225 int ath10k_wmi_vdev_set_param(struct ath10k *ar, u32 vdev_id, 4226 u32 param_id, u32 param_value); 4227 int ath10k_wmi_vdev_install_key(struct ath10k *ar, 4228 const struct wmi_vdev_install_key_arg *arg); 4229 int ath10k_wmi_peer_create(struct ath10k *ar, u32 vdev_id, 4230 const u8 peer_addr[ETH_ALEN]); 4231 int ath10k_wmi_peer_delete(struct ath10k *ar, u32 vdev_id, 4232 const u8 peer_addr[ETH_ALEN]); 4233 int ath10k_wmi_peer_flush(struct ath10k *ar, u32 vdev_id, 4234 const u8 peer_addr[ETH_ALEN], u32 tid_bitmap); 4235 int ath10k_wmi_peer_set_param(struct ath10k *ar, u32 vdev_id, 4236 const u8 *peer_addr, 4237 enum wmi_peer_param param_id, u32 param_value); 4238 int ath10k_wmi_peer_assoc(struct ath10k *ar, 4239 const struct wmi_peer_assoc_complete_arg *arg); 4240 int ath10k_wmi_set_psmode(struct ath10k *ar, u32 vdev_id, 4241 enum wmi_sta_ps_mode psmode); 4242 int ath10k_wmi_set_sta_ps_param(struct ath10k *ar, u32 vdev_id, 4243 enum wmi_sta_powersave_param param_id, 4244 u32 value); 4245 int ath10k_wmi_set_ap_ps_param(struct ath10k *ar, u32 vdev_id, const u8 *mac, 4246 enum wmi_ap_ps_peer_param param_id, u32 value); 4247 int ath10k_wmi_scan_chan_list(struct ath10k *ar, 4248 const struct wmi_scan_chan_list_arg *arg); 4249 int ath10k_wmi_beacon_send_ref_nowait(struct ath10k_vif *arvif); 4250 int ath10k_wmi_pdev_set_wmm_params(struct ath10k *ar, 4251 const struct wmi_pdev_set_wmm_params_arg *arg); 4252 int ath10k_wmi_request_stats(struct ath10k *ar, enum wmi_stats_id stats_id); 4253 int ath10k_wmi_force_fw_hang(struct ath10k *ar, 4254 enum wmi_force_fw_hang_type type, u32 delay_ms); 4255 int ath10k_wmi_mgmt_tx(struct ath10k *ar, struct sk_buff *skb); 4256 int ath10k_wmi_dbglog_cfg(struct ath10k *ar, u32 module_enable); 4257 4258 #endif /* _WMI_H_ */ 4259