1 /* 2 * Copyright (c) 2005-2011 Atheros Communications Inc. 3 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. 4 * Copyright (c) 2018, The Linux Foundation. All rights reserved. 5 * 6 * Permission to use, copy, modify, and/or distribute this software for any 7 * purpose with or without fee is hereby granted, provided that the above 8 * copyright notice and this permission notice appear in all copies. 9 * 10 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 11 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 12 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 13 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 14 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 15 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 16 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 17 */ 18 19 #ifndef _WMI_H_ 20 #define _WMI_H_ 21 22 #include <linux/types.h> 23 #include <net/mac80211.h> 24 25 /* 26 * This file specifies the WMI interface for the Unified Software 27 * Architecture. 28 * 29 * It includes definitions of all the commands and events. Commands are 30 * messages from the host to the target. Events and Replies are messages 31 * from the target to the host. 32 * 33 * Ownership of correctness in regards to WMI commands belongs to the host 34 * driver and the target is not required to validate parameters for value, 35 * proper range, or any other checking. 36 * 37 * Guidelines for extending this interface are below. 38 * 39 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff 40 * 41 * 2. Use ONLY u32 type for defining member variables within WMI 42 * command/event structures. Do not use u8, u16, bool or 43 * enum types within these structures. 44 * 45 * 3. DO NOT define bit fields within structures. Implement bit fields 46 * using masks if necessary. Do not use the programming language's bit 47 * field definition. 48 * 49 * 4. Define macros for encode/decode of u8, u16 fields within 50 * the u32 variables. Use these macros for set/get of these fields. 51 * Try to use this to optimize the structure without bloating it with 52 * u32 variables for every lower sized field. 53 * 54 * 5. Do not use PACK/UNPACK attributes for the structures as each member 55 * variable is already 4-byte aligned by virtue of being a u32 56 * type. 57 * 58 * 6. Comment each parameter part of the WMI command/event structure by 59 * using the 2 stars at the beginning of C comment instead of one star to 60 * enable HTML document generation using Doxygen. 61 * 62 */ 63 64 /* Control Path */ 65 struct wmi_cmd_hdr { 66 __le32 cmd_id; 67 } __packed; 68 69 #define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF 70 #define WMI_CMD_HDR_CMD_ID_LSB 0 71 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000 72 #define WMI_CMD_HDR_PLT_PRIV_LSB 24 73 74 #define HTC_PROTOCOL_VERSION 0x0002 75 #define WMI_PROTOCOL_VERSION 0x0002 76 77 /* 78 * There is no signed version of __le32, so for a temporary solution come 79 * up with our own version. The idea is from fs/ntfs/endian.h. 80 * 81 * Use a_ prefix so that it doesn't conflict if we get proper support to 82 * linux/types.h. 83 */ 84 typedef __s32 __bitwise a_sle32; 85 86 static inline a_sle32 a_cpu_to_sle32(s32 val) 87 { 88 return (__force a_sle32)cpu_to_le32(val); 89 } 90 91 static inline s32 a_sle32_to_cpu(a_sle32 val) 92 { 93 return le32_to_cpu((__force __le32)val); 94 } 95 96 enum wmi_service { 97 WMI_SERVICE_BEACON_OFFLOAD = 0, 98 WMI_SERVICE_SCAN_OFFLOAD, 99 WMI_SERVICE_ROAM_OFFLOAD, 100 WMI_SERVICE_BCN_MISS_OFFLOAD, 101 WMI_SERVICE_STA_PWRSAVE, 102 WMI_SERVICE_STA_ADVANCED_PWRSAVE, 103 WMI_SERVICE_AP_UAPSD, 104 WMI_SERVICE_AP_DFS, 105 WMI_SERVICE_11AC, 106 WMI_SERVICE_BLOCKACK, 107 WMI_SERVICE_PHYERR, 108 WMI_SERVICE_BCN_FILTER, 109 WMI_SERVICE_RTT, 110 WMI_SERVICE_RATECTRL, 111 WMI_SERVICE_WOW, 112 WMI_SERVICE_RATECTRL_CACHE, 113 WMI_SERVICE_IRAM_TIDS, 114 WMI_SERVICE_ARPNS_OFFLOAD, 115 WMI_SERVICE_NLO, 116 WMI_SERVICE_GTK_OFFLOAD, 117 WMI_SERVICE_SCAN_SCH, 118 WMI_SERVICE_CSA_OFFLOAD, 119 WMI_SERVICE_CHATTER, 120 WMI_SERVICE_COEX_FREQAVOID, 121 WMI_SERVICE_PACKET_POWER_SAVE, 122 WMI_SERVICE_FORCE_FW_HANG, 123 WMI_SERVICE_GPIO, 124 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 125 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 126 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 127 WMI_SERVICE_STA_KEEP_ALIVE, 128 WMI_SERVICE_TX_ENCAP, 129 WMI_SERVICE_BURST, 130 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, 131 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, 132 WMI_SERVICE_ROAM_SCAN_OFFLOAD, 133 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 134 WMI_SERVICE_EARLY_RX, 135 WMI_SERVICE_STA_SMPS, 136 WMI_SERVICE_FWTEST, 137 WMI_SERVICE_STA_WMMAC, 138 WMI_SERVICE_TDLS, 139 WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE, 140 WMI_SERVICE_ADAPTIVE_OCS, 141 WMI_SERVICE_BA_SSN_SUPPORT, 142 WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE, 143 WMI_SERVICE_WLAN_HB, 144 WMI_SERVICE_LTE_ANT_SHARE_SUPPORT, 145 WMI_SERVICE_BATCH_SCAN, 146 WMI_SERVICE_QPOWER, 147 WMI_SERVICE_PLMREQ, 148 WMI_SERVICE_THERMAL_MGMT, 149 WMI_SERVICE_RMC, 150 WMI_SERVICE_MHF_OFFLOAD, 151 WMI_SERVICE_COEX_SAR, 152 WMI_SERVICE_BCN_TXRATE_OVERRIDE, 153 WMI_SERVICE_NAN, 154 WMI_SERVICE_L1SS_STAT, 155 WMI_SERVICE_ESTIMATE_LINKSPEED, 156 WMI_SERVICE_OBSS_SCAN, 157 WMI_SERVICE_TDLS_OFFCHAN, 158 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, 159 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, 160 WMI_SERVICE_IBSS_PWRSAVE, 161 WMI_SERVICE_LPASS, 162 WMI_SERVICE_EXTSCAN, 163 WMI_SERVICE_D0WOW, 164 WMI_SERVICE_HSOFFLOAD, 165 WMI_SERVICE_ROAM_HO_OFFLOAD, 166 WMI_SERVICE_RX_FULL_REORDER, 167 WMI_SERVICE_DHCP_OFFLOAD, 168 WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT, 169 WMI_SERVICE_MDNS_OFFLOAD, 170 WMI_SERVICE_SAP_AUTH_OFFLOAD, 171 WMI_SERVICE_ATF, 172 WMI_SERVICE_COEX_GPIO, 173 WMI_SERVICE_ENHANCED_PROXY_STA, 174 WMI_SERVICE_TT, 175 WMI_SERVICE_PEER_CACHING, 176 WMI_SERVICE_AUX_SPECTRAL_INTF, 177 WMI_SERVICE_AUX_CHAN_LOAD_INTF, 178 WMI_SERVICE_BSS_CHANNEL_INFO_64, 179 WMI_SERVICE_EXT_RES_CFG_SUPPORT, 180 WMI_SERVICE_MESH_11S, 181 WMI_SERVICE_MESH_NON_11S, 182 WMI_SERVICE_PEER_STATS, 183 WMI_SERVICE_RESTRT_CHNL_SUPPORT, 184 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 185 WMI_SERVICE_TX_MODE_PUSH_ONLY, 186 WMI_SERVICE_TX_MODE_PUSH_PULL, 187 WMI_SERVICE_TX_MODE_DYNAMIC, 188 WMI_SERVICE_VDEV_RX_FILTER, 189 WMI_SERVICE_BTCOEX, 190 WMI_SERVICE_CHECK_CAL_VERSION, 191 WMI_SERVICE_DBGLOG_WARN2, 192 WMI_SERVICE_BTCOEX_DUTY_CYCLE, 193 WMI_SERVICE_4_WIRE_COEX_SUPPORT, 194 WMI_SERVICE_EXTENDED_NSS_SUPPORT, 195 WMI_SERVICE_PROG_GPIO_BAND_SELECT, 196 WMI_SERVICE_SMART_LOGGING_SUPPORT, 197 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 198 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 199 WMI_SERVICE_MGMT_TX_WMI, 200 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, 201 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 202 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, 203 WMI_SERVICE_TPC_STATS_FINAL, 204 WMI_SERVICE_RESET_CHIP, 205 WMI_SERVICE_SPOOF_MAC_SUPPORT, 206 207 /* keep last */ 208 WMI_SERVICE_MAX, 209 }; 210 211 enum wmi_10x_service { 212 WMI_10X_SERVICE_BEACON_OFFLOAD = 0, 213 WMI_10X_SERVICE_SCAN_OFFLOAD, 214 WMI_10X_SERVICE_ROAM_OFFLOAD, 215 WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 216 WMI_10X_SERVICE_STA_PWRSAVE, 217 WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 218 WMI_10X_SERVICE_AP_UAPSD, 219 WMI_10X_SERVICE_AP_DFS, 220 WMI_10X_SERVICE_11AC, 221 WMI_10X_SERVICE_BLOCKACK, 222 WMI_10X_SERVICE_PHYERR, 223 WMI_10X_SERVICE_BCN_FILTER, 224 WMI_10X_SERVICE_RTT, 225 WMI_10X_SERVICE_RATECTRL, 226 WMI_10X_SERVICE_WOW, 227 WMI_10X_SERVICE_RATECTRL_CACHE, 228 WMI_10X_SERVICE_IRAM_TIDS, 229 WMI_10X_SERVICE_BURST, 230 231 /* introduced in 10.2 */ 232 WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 233 WMI_10X_SERVICE_FORCE_FW_HANG, 234 WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 235 WMI_10X_SERVICE_ATF, 236 WMI_10X_SERVICE_COEX_GPIO, 237 WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 238 WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 239 WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 240 WMI_10X_SERVICE_MESH, 241 WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 242 WMI_10X_SERVICE_PEER_STATS, 243 WMI_10X_SERVICE_RESET_CHIP, 244 WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 245 }; 246 247 enum wmi_main_service { 248 WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0, 249 WMI_MAIN_SERVICE_SCAN_OFFLOAD, 250 WMI_MAIN_SERVICE_ROAM_OFFLOAD, 251 WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 252 WMI_MAIN_SERVICE_STA_PWRSAVE, 253 WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 254 WMI_MAIN_SERVICE_AP_UAPSD, 255 WMI_MAIN_SERVICE_AP_DFS, 256 WMI_MAIN_SERVICE_11AC, 257 WMI_MAIN_SERVICE_BLOCKACK, 258 WMI_MAIN_SERVICE_PHYERR, 259 WMI_MAIN_SERVICE_BCN_FILTER, 260 WMI_MAIN_SERVICE_RTT, 261 WMI_MAIN_SERVICE_RATECTRL, 262 WMI_MAIN_SERVICE_WOW, 263 WMI_MAIN_SERVICE_RATECTRL_CACHE, 264 WMI_MAIN_SERVICE_IRAM_TIDS, 265 WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 266 WMI_MAIN_SERVICE_NLO, 267 WMI_MAIN_SERVICE_GTK_OFFLOAD, 268 WMI_MAIN_SERVICE_SCAN_SCH, 269 WMI_MAIN_SERVICE_CSA_OFFLOAD, 270 WMI_MAIN_SERVICE_CHATTER, 271 WMI_MAIN_SERVICE_COEX_FREQAVOID, 272 WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 273 WMI_MAIN_SERVICE_FORCE_FW_HANG, 274 WMI_MAIN_SERVICE_GPIO, 275 WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 276 WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 277 WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 278 WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 279 WMI_MAIN_SERVICE_TX_ENCAP, 280 }; 281 282 enum wmi_10_4_service { 283 WMI_10_4_SERVICE_BEACON_OFFLOAD = 0, 284 WMI_10_4_SERVICE_SCAN_OFFLOAD, 285 WMI_10_4_SERVICE_ROAM_OFFLOAD, 286 WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 287 WMI_10_4_SERVICE_STA_PWRSAVE, 288 WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 289 WMI_10_4_SERVICE_AP_UAPSD, 290 WMI_10_4_SERVICE_AP_DFS, 291 WMI_10_4_SERVICE_11AC, 292 WMI_10_4_SERVICE_BLOCKACK, 293 WMI_10_4_SERVICE_PHYERR, 294 WMI_10_4_SERVICE_BCN_FILTER, 295 WMI_10_4_SERVICE_RTT, 296 WMI_10_4_SERVICE_RATECTRL, 297 WMI_10_4_SERVICE_WOW, 298 WMI_10_4_SERVICE_RATECTRL_CACHE, 299 WMI_10_4_SERVICE_IRAM_TIDS, 300 WMI_10_4_SERVICE_BURST, 301 WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 302 WMI_10_4_SERVICE_GTK_OFFLOAD, 303 WMI_10_4_SERVICE_SCAN_SCH, 304 WMI_10_4_SERVICE_CSA_OFFLOAD, 305 WMI_10_4_SERVICE_CHATTER, 306 WMI_10_4_SERVICE_COEX_FREQAVOID, 307 WMI_10_4_SERVICE_PACKET_POWER_SAVE, 308 WMI_10_4_SERVICE_FORCE_FW_HANG, 309 WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 310 WMI_10_4_SERVICE_GPIO, 311 WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 312 WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 313 WMI_10_4_SERVICE_STA_KEEP_ALIVE, 314 WMI_10_4_SERVICE_TX_ENCAP, 315 WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 316 WMI_10_4_SERVICE_EARLY_RX, 317 WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 318 WMI_10_4_SERVICE_TT, 319 WMI_10_4_SERVICE_ATF, 320 WMI_10_4_SERVICE_PEER_CACHING, 321 WMI_10_4_SERVICE_COEX_GPIO, 322 WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 323 WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 324 WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 325 WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 326 WMI_10_4_SERVICE_MESH_NON_11S, 327 WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 328 WMI_10_4_SERVICE_PEER_STATS, 329 WMI_10_4_SERVICE_MESH_11S, 330 WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 331 WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 332 WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 333 WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 334 WMI_10_4_SERVICE_VDEV_RX_FILTER, 335 WMI_10_4_SERVICE_BTCOEX, 336 WMI_10_4_SERVICE_CHECK_CAL_VERSION, 337 WMI_10_4_SERVICE_DBGLOG_WARN2, 338 WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, 339 WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, 340 WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, 341 WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, 342 WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, 343 WMI_10_4_SERVICE_TDLS, 344 WMI_10_4_SERVICE_TDLS_OFFCHAN, 345 WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, 346 WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, 347 WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 348 WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 349 WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, 350 WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 351 WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, 352 WMI_10_4_SERVICE_TPC_STATS_FINAL, 353 }; 354 355 static inline char *wmi_service_name(int service_id) 356 { 357 #define SVCSTR(x) case x: return #x 358 359 switch (service_id) { 360 SVCSTR(WMI_SERVICE_BEACON_OFFLOAD); 361 SVCSTR(WMI_SERVICE_SCAN_OFFLOAD); 362 SVCSTR(WMI_SERVICE_ROAM_OFFLOAD); 363 SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD); 364 SVCSTR(WMI_SERVICE_STA_PWRSAVE); 365 SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE); 366 SVCSTR(WMI_SERVICE_AP_UAPSD); 367 SVCSTR(WMI_SERVICE_AP_DFS); 368 SVCSTR(WMI_SERVICE_11AC); 369 SVCSTR(WMI_SERVICE_BLOCKACK); 370 SVCSTR(WMI_SERVICE_PHYERR); 371 SVCSTR(WMI_SERVICE_BCN_FILTER); 372 SVCSTR(WMI_SERVICE_RTT); 373 SVCSTR(WMI_SERVICE_RATECTRL); 374 SVCSTR(WMI_SERVICE_WOW); 375 SVCSTR(WMI_SERVICE_RATECTRL_CACHE); 376 SVCSTR(WMI_SERVICE_IRAM_TIDS); 377 SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD); 378 SVCSTR(WMI_SERVICE_NLO); 379 SVCSTR(WMI_SERVICE_GTK_OFFLOAD); 380 SVCSTR(WMI_SERVICE_SCAN_SCH); 381 SVCSTR(WMI_SERVICE_CSA_OFFLOAD); 382 SVCSTR(WMI_SERVICE_CHATTER); 383 SVCSTR(WMI_SERVICE_COEX_FREQAVOID); 384 SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE); 385 SVCSTR(WMI_SERVICE_FORCE_FW_HANG); 386 SVCSTR(WMI_SERVICE_GPIO); 387 SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM); 388 SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG); 389 SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG); 390 SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE); 391 SVCSTR(WMI_SERVICE_TX_ENCAP); 392 SVCSTR(WMI_SERVICE_BURST); 393 SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT); 394 SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT); 395 SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD); 396 SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC); 397 SVCSTR(WMI_SERVICE_EARLY_RX); 398 SVCSTR(WMI_SERVICE_STA_SMPS); 399 SVCSTR(WMI_SERVICE_FWTEST); 400 SVCSTR(WMI_SERVICE_STA_WMMAC); 401 SVCSTR(WMI_SERVICE_TDLS); 402 SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE); 403 SVCSTR(WMI_SERVICE_ADAPTIVE_OCS); 404 SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT); 405 SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE); 406 SVCSTR(WMI_SERVICE_WLAN_HB); 407 SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT); 408 SVCSTR(WMI_SERVICE_BATCH_SCAN); 409 SVCSTR(WMI_SERVICE_QPOWER); 410 SVCSTR(WMI_SERVICE_PLMREQ); 411 SVCSTR(WMI_SERVICE_THERMAL_MGMT); 412 SVCSTR(WMI_SERVICE_RMC); 413 SVCSTR(WMI_SERVICE_MHF_OFFLOAD); 414 SVCSTR(WMI_SERVICE_COEX_SAR); 415 SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE); 416 SVCSTR(WMI_SERVICE_NAN); 417 SVCSTR(WMI_SERVICE_L1SS_STAT); 418 SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED); 419 SVCSTR(WMI_SERVICE_OBSS_SCAN); 420 SVCSTR(WMI_SERVICE_TDLS_OFFCHAN); 421 SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA); 422 SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA); 423 SVCSTR(WMI_SERVICE_IBSS_PWRSAVE); 424 SVCSTR(WMI_SERVICE_LPASS); 425 SVCSTR(WMI_SERVICE_EXTSCAN); 426 SVCSTR(WMI_SERVICE_D0WOW); 427 SVCSTR(WMI_SERVICE_HSOFFLOAD); 428 SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD); 429 SVCSTR(WMI_SERVICE_RX_FULL_REORDER); 430 SVCSTR(WMI_SERVICE_DHCP_OFFLOAD); 431 SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT); 432 SVCSTR(WMI_SERVICE_MDNS_OFFLOAD); 433 SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD); 434 SVCSTR(WMI_SERVICE_ATF); 435 SVCSTR(WMI_SERVICE_COEX_GPIO); 436 SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA); 437 SVCSTR(WMI_SERVICE_TT); 438 SVCSTR(WMI_SERVICE_PEER_CACHING); 439 SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF); 440 SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF); 441 SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64); 442 SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT); 443 SVCSTR(WMI_SERVICE_MESH_11S); 444 SVCSTR(WMI_SERVICE_MESH_NON_11S); 445 SVCSTR(WMI_SERVICE_PEER_STATS); 446 SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT); 447 SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT); 448 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY); 449 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL); 450 SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC); 451 SVCSTR(WMI_SERVICE_VDEV_RX_FILTER); 452 SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION); 453 SVCSTR(WMI_SERVICE_DBGLOG_WARN2); 454 SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE); 455 SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT); 456 SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT); 457 SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT); 458 SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT); 459 SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE); 460 SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY); 461 SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH); 462 SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS); 463 SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT); 464 SVCSTR(WMI_SERVICE_TPC_STATS_FINAL); 465 SVCSTR(WMI_SERVICE_RESET_CHIP); 466 default: 467 return NULL; 468 } 469 470 #undef SVCSTR 471 } 472 473 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 474 ((svc_id) < (len) && \ 475 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \ 476 BIT((svc_id) % (sizeof(u32)))) 477 478 /* This extension is required to accommodate new services, current limit 479 * for wmi_services is 64 as target is using only 4-bits of each 32-bit 480 * wmi_service word. Extending this to make use of remaining unused bits 481 * for new services. 482 */ 483 #define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 484 ((svc_id) >= (len) && \ 485 __le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \ 486 BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4)) 487 488 #define SVCMAP(x, y, len) \ 489 do { \ 490 if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \ 491 (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \ 492 __set_bit(y, out); \ 493 } while (0) 494 495 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out, 496 size_t len) 497 { 498 SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD, 499 WMI_SERVICE_BEACON_OFFLOAD, len); 500 SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD, 501 WMI_SERVICE_SCAN_OFFLOAD, len); 502 SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD, 503 WMI_SERVICE_ROAM_OFFLOAD, len); 504 SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 505 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 506 SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE, 507 WMI_SERVICE_STA_PWRSAVE, len); 508 SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 509 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 510 SVCMAP(WMI_10X_SERVICE_AP_UAPSD, 511 WMI_SERVICE_AP_UAPSD, len); 512 SVCMAP(WMI_10X_SERVICE_AP_DFS, 513 WMI_SERVICE_AP_DFS, len); 514 SVCMAP(WMI_10X_SERVICE_11AC, 515 WMI_SERVICE_11AC, len); 516 SVCMAP(WMI_10X_SERVICE_BLOCKACK, 517 WMI_SERVICE_BLOCKACK, len); 518 SVCMAP(WMI_10X_SERVICE_PHYERR, 519 WMI_SERVICE_PHYERR, len); 520 SVCMAP(WMI_10X_SERVICE_BCN_FILTER, 521 WMI_SERVICE_BCN_FILTER, len); 522 SVCMAP(WMI_10X_SERVICE_RTT, 523 WMI_SERVICE_RTT, len); 524 SVCMAP(WMI_10X_SERVICE_RATECTRL, 525 WMI_SERVICE_RATECTRL, len); 526 SVCMAP(WMI_10X_SERVICE_WOW, 527 WMI_SERVICE_WOW, len); 528 SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE, 529 WMI_SERVICE_RATECTRL_CACHE, len); 530 SVCMAP(WMI_10X_SERVICE_IRAM_TIDS, 531 WMI_SERVICE_IRAM_TIDS, len); 532 SVCMAP(WMI_10X_SERVICE_BURST, 533 WMI_SERVICE_BURST, len); 534 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 535 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 536 SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG, 537 WMI_SERVICE_FORCE_FW_HANG, len); 538 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 539 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 540 SVCMAP(WMI_10X_SERVICE_ATF, 541 WMI_SERVICE_ATF, len); 542 SVCMAP(WMI_10X_SERVICE_COEX_GPIO, 543 WMI_SERVICE_COEX_GPIO, len); 544 SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 545 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 546 SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 547 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 548 SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 549 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 550 SVCMAP(WMI_10X_SERVICE_MESH, 551 WMI_SERVICE_MESH_11S, len); 552 SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 553 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 554 SVCMAP(WMI_10X_SERVICE_PEER_STATS, 555 WMI_SERVICE_PEER_STATS, len); 556 SVCMAP(WMI_10X_SERVICE_RESET_CHIP, 557 WMI_SERVICE_RESET_CHIP, len); 558 SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 559 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len); 560 } 561 562 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out, 563 size_t len) 564 { 565 SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD, 566 WMI_SERVICE_BEACON_OFFLOAD, len); 567 SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD, 568 WMI_SERVICE_SCAN_OFFLOAD, len); 569 SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD, 570 WMI_SERVICE_ROAM_OFFLOAD, len); 571 SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 572 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 573 SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE, 574 WMI_SERVICE_STA_PWRSAVE, len); 575 SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 576 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 577 SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD, 578 WMI_SERVICE_AP_UAPSD, len); 579 SVCMAP(WMI_MAIN_SERVICE_AP_DFS, 580 WMI_SERVICE_AP_DFS, len); 581 SVCMAP(WMI_MAIN_SERVICE_11AC, 582 WMI_SERVICE_11AC, len); 583 SVCMAP(WMI_MAIN_SERVICE_BLOCKACK, 584 WMI_SERVICE_BLOCKACK, len); 585 SVCMAP(WMI_MAIN_SERVICE_PHYERR, 586 WMI_SERVICE_PHYERR, len); 587 SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER, 588 WMI_SERVICE_BCN_FILTER, len); 589 SVCMAP(WMI_MAIN_SERVICE_RTT, 590 WMI_SERVICE_RTT, len); 591 SVCMAP(WMI_MAIN_SERVICE_RATECTRL, 592 WMI_SERVICE_RATECTRL, len); 593 SVCMAP(WMI_MAIN_SERVICE_WOW, 594 WMI_SERVICE_WOW, len); 595 SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE, 596 WMI_SERVICE_RATECTRL_CACHE, len); 597 SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS, 598 WMI_SERVICE_IRAM_TIDS, len); 599 SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 600 WMI_SERVICE_ARPNS_OFFLOAD, len); 601 SVCMAP(WMI_MAIN_SERVICE_NLO, 602 WMI_SERVICE_NLO, len); 603 SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD, 604 WMI_SERVICE_GTK_OFFLOAD, len); 605 SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH, 606 WMI_SERVICE_SCAN_SCH, len); 607 SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD, 608 WMI_SERVICE_CSA_OFFLOAD, len); 609 SVCMAP(WMI_MAIN_SERVICE_CHATTER, 610 WMI_SERVICE_CHATTER, len); 611 SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID, 612 WMI_SERVICE_COEX_FREQAVOID, len); 613 SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 614 WMI_SERVICE_PACKET_POWER_SAVE, len); 615 SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG, 616 WMI_SERVICE_FORCE_FW_HANG, len); 617 SVCMAP(WMI_MAIN_SERVICE_GPIO, 618 WMI_SERVICE_GPIO, len); 619 SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 620 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len); 621 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 622 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 623 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 624 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 625 SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 626 WMI_SERVICE_STA_KEEP_ALIVE, len); 627 SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP, 628 WMI_SERVICE_TX_ENCAP, len); 629 } 630 631 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out, 632 size_t len) 633 { 634 SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD, 635 WMI_SERVICE_BEACON_OFFLOAD, len); 636 SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD, 637 WMI_SERVICE_SCAN_OFFLOAD, len); 638 SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD, 639 WMI_SERVICE_ROAM_OFFLOAD, len); 640 SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 641 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 642 SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE, 643 WMI_SERVICE_STA_PWRSAVE, len); 644 SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 645 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 646 SVCMAP(WMI_10_4_SERVICE_AP_UAPSD, 647 WMI_SERVICE_AP_UAPSD, len); 648 SVCMAP(WMI_10_4_SERVICE_AP_DFS, 649 WMI_SERVICE_AP_DFS, len); 650 SVCMAP(WMI_10_4_SERVICE_11AC, 651 WMI_SERVICE_11AC, len); 652 SVCMAP(WMI_10_4_SERVICE_BLOCKACK, 653 WMI_SERVICE_BLOCKACK, len); 654 SVCMAP(WMI_10_4_SERVICE_PHYERR, 655 WMI_SERVICE_PHYERR, len); 656 SVCMAP(WMI_10_4_SERVICE_BCN_FILTER, 657 WMI_SERVICE_BCN_FILTER, len); 658 SVCMAP(WMI_10_4_SERVICE_RTT, 659 WMI_SERVICE_RTT, len); 660 SVCMAP(WMI_10_4_SERVICE_RATECTRL, 661 WMI_SERVICE_RATECTRL, len); 662 SVCMAP(WMI_10_4_SERVICE_WOW, 663 WMI_SERVICE_WOW, len); 664 SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE, 665 WMI_SERVICE_RATECTRL_CACHE, len); 666 SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS, 667 WMI_SERVICE_IRAM_TIDS, len); 668 SVCMAP(WMI_10_4_SERVICE_BURST, 669 WMI_SERVICE_BURST, len); 670 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 671 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 672 SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD, 673 WMI_SERVICE_GTK_OFFLOAD, len); 674 SVCMAP(WMI_10_4_SERVICE_SCAN_SCH, 675 WMI_SERVICE_SCAN_SCH, len); 676 SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD, 677 WMI_SERVICE_CSA_OFFLOAD, len); 678 SVCMAP(WMI_10_4_SERVICE_CHATTER, 679 WMI_SERVICE_CHATTER, len); 680 SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID, 681 WMI_SERVICE_COEX_FREQAVOID, len); 682 SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE, 683 WMI_SERVICE_PACKET_POWER_SAVE, len); 684 SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG, 685 WMI_SERVICE_FORCE_FW_HANG, len); 686 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 687 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 688 SVCMAP(WMI_10_4_SERVICE_GPIO, 689 WMI_SERVICE_GPIO, len); 690 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 691 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 692 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 693 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 694 SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE, 695 WMI_SERVICE_STA_KEEP_ALIVE, len); 696 SVCMAP(WMI_10_4_SERVICE_TX_ENCAP, 697 WMI_SERVICE_TX_ENCAP, len); 698 SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 699 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len); 700 SVCMAP(WMI_10_4_SERVICE_EARLY_RX, 701 WMI_SERVICE_EARLY_RX, len); 702 SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 703 WMI_SERVICE_ENHANCED_PROXY_STA, len); 704 SVCMAP(WMI_10_4_SERVICE_TT, 705 WMI_SERVICE_TT, len); 706 SVCMAP(WMI_10_4_SERVICE_ATF, 707 WMI_SERVICE_ATF, len); 708 SVCMAP(WMI_10_4_SERVICE_PEER_CACHING, 709 WMI_SERVICE_PEER_CACHING, len); 710 SVCMAP(WMI_10_4_SERVICE_COEX_GPIO, 711 WMI_SERVICE_COEX_GPIO, len); 712 SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 713 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 714 SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 715 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 716 SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 717 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 718 SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 719 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 720 SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S, 721 WMI_SERVICE_MESH_NON_11S, len); 722 SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 723 WMI_SERVICE_RESTRT_CHNL_SUPPORT, len); 724 SVCMAP(WMI_10_4_SERVICE_PEER_STATS, 725 WMI_SERVICE_PEER_STATS, len); 726 SVCMAP(WMI_10_4_SERVICE_MESH_11S, 727 WMI_SERVICE_MESH_11S, len); 728 SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 729 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len); 730 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 731 WMI_SERVICE_TX_MODE_PUSH_ONLY, len); 732 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 733 WMI_SERVICE_TX_MODE_PUSH_PULL, len); 734 SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 735 WMI_SERVICE_TX_MODE_DYNAMIC, len); 736 SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER, 737 WMI_SERVICE_VDEV_RX_FILTER, len); 738 SVCMAP(WMI_10_4_SERVICE_BTCOEX, 739 WMI_SERVICE_BTCOEX, len); 740 SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION, 741 WMI_SERVICE_CHECK_CAL_VERSION, len); 742 SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2, 743 WMI_SERVICE_DBGLOG_WARN2, len); 744 SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, 745 WMI_SERVICE_BTCOEX_DUTY_CYCLE, len); 746 SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, 747 WMI_SERVICE_4_WIRE_COEX_SUPPORT, len); 748 SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, 749 WMI_SERVICE_EXTENDED_NSS_SUPPORT, len); 750 SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, 751 WMI_SERVICE_PROG_GPIO_BAND_SELECT, len); 752 SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, 753 WMI_SERVICE_SMART_LOGGING_SUPPORT, len); 754 SVCMAP(WMI_10_4_SERVICE_TDLS, 755 WMI_SERVICE_TDLS, len); 756 SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN, 757 WMI_SERVICE_TDLS_OFFCHAN, len); 758 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, 759 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len); 760 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, 761 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len); 762 SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 763 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len); 764 SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 765 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len); 766 SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, 767 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len); 768 SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 769 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len); 770 SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, 771 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len); 772 SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL, 773 WMI_SERVICE_TPC_STATS_FINAL, len); 774 } 775 776 #undef SVCMAP 777 778 /* 2 word representation of MAC addr */ 779 struct wmi_mac_addr { 780 union { 781 u8 addr[6]; 782 struct { 783 u32 word0; 784 u32 word1; 785 } __packed; 786 } __packed; 787 } __packed; 788 789 struct wmi_cmd_map { 790 u32 init_cmdid; 791 u32 start_scan_cmdid; 792 u32 stop_scan_cmdid; 793 u32 scan_chan_list_cmdid; 794 u32 scan_sch_prio_tbl_cmdid; 795 u32 scan_prob_req_oui_cmdid; 796 u32 pdev_set_regdomain_cmdid; 797 u32 pdev_set_channel_cmdid; 798 u32 pdev_set_param_cmdid; 799 u32 pdev_pktlog_enable_cmdid; 800 u32 pdev_pktlog_disable_cmdid; 801 u32 pdev_set_wmm_params_cmdid; 802 u32 pdev_set_ht_cap_ie_cmdid; 803 u32 pdev_set_vht_cap_ie_cmdid; 804 u32 pdev_set_dscp_tid_map_cmdid; 805 u32 pdev_set_quiet_mode_cmdid; 806 u32 pdev_green_ap_ps_enable_cmdid; 807 u32 pdev_get_tpc_config_cmdid; 808 u32 pdev_set_base_macaddr_cmdid; 809 u32 vdev_create_cmdid; 810 u32 vdev_delete_cmdid; 811 u32 vdev_start_request_cmdid; 812 u32 vdev_restart_request_cmdid; 813 u32 vdev_up_cmdid; 814 u32 vdev_stop_cmdid; 815 u32 vdev_down_cmdid; 816 u32 vdev_set_param_cmdid; 817 u32 vdev_install_key_cmdid; 818 u32 peer_create_cmdid; 819 u32 peer_delete_cmdid; 820 u32 peer_flush_tids_cmdid; 821 u32 peer_set_param_cmdid; 822 u32 peer_assoc_cmdid; 823 u32 peer_add_wds_entry_cmdid; 824 u32 peer_remove_wds_entry_cmdid; 825 u32 peer_mcast_group_cmdid; 826 u32 bcn_tx_cmdid; 827 u32 pdev_send_bcn_cmdid; 828 u32 bcn_tmpl_cmdid; 829 u32 bcn_filter_rx_cmdid; 830 u32 prb_req_filter_rx_cmdid; 831 u32 mgmt_tx_cmdid; 832 u32 mgmt_tx_send_cmdid; 833 u32 prb_tmpl_cmdid; 834 u32 addba_clear_resp_cmdid; 835 u32 addba_send_cmdid; 836 u32 addba_status_cmdid; 837 u32 delba_send_cmdid; 838 u32 addba_set_resp_cmdid; 839 u32 send_singleamsdu_cmdid; 840 u32 sta_powersave_mode_cmdid; 841 u32 sta_powersave_param_cmdid; 842 u32 sta_mimo_ps_mode_cmdid; 843 u32 pdev_dfs_enable_cmdid; 844 u32 pdev_dfs_disable_cmdid; 845 u32 roam_scan_mode; 846 u32 roam_scan_rssi_threshold; 847 u32 roam_scan_period; 848 u32 roam_scan_rssi_change_threshold; 849 u32 roam_ap_profile; 850 u32 ofl_scan_add_ap_profile; 851 u32 ofl_scan_remove_ap_profile; 852 u32 ofl_scan_period; 853 u32 p2p_dev_set_device_info; 854 u32 p2p_dev_set_discoverability; 855 u32 p2p_go_set_beacon_ie; 856 u32 p2p_go_set_probe_resp_ie; 857 u32 p2p_set_vendor_ie_data_cmdid; 858 u32 ap_ps_peer_param_cmdid; 859 u32 ap_ps_peer_uapsd_coex_cmdid; 860 u32 peer_rate_retry_sched_cmdid; 861 u32 wlan_profile_trigger_cmdid; 862 u32 wlan_profile_set_hist_intvl_cmdid; 863 u32 wlan_profile_get_profile_data_cmdid; 864 u32 wlan_profile_enable_profile_id_cmdid; 865 u32 wlan_profile_list_profile_id_cmdid; 866 u32 pdev_suspend_cmdid; 867 u32 pdev_resume_cmdid; 868 u32 add_bcn_filter_cmdid; 869 u32 rmv_bcn_filter_cmdid; 870 u32 wow_add_wake_pattern_cmdid; 871 u32 wow_del_wake_pattern_cmdid; 872 u32 wow_enable_disable_wake_event_cmdid; 873 u32 wow_enable_cmdid; 874 u32 wow_hostwakeup_from_sleep_cmdid; 875 u32 rtt_measreq_cmdid; 876 u32 rtt_tsf_cmdid; 877 u32 vdev_spectral_scan_configure_cmdid; 878 u32 vdev_spectral_scan_enable_cmdid; 879 u32 request_stats_cmdid; 880 u32 set_arp_ns_offload_cmdid; 881 u32 network_list_offload_config_cmdid; 882 u32 gtk_offload_cmdid; 883 u32 csa_offload_enable_cmdid; 884 u32 csa_offload_chanswitch_cmdid; 885 u32 chatter_set_mode_cmdid; 886 u32 peer_tid_addba_cmdid; 887 u32 peer_tid_delba_cmdid; 888 u32 sta_dtim_ps_method_cmdid; 889 u32 sta_uapsd_auto_trig_cmdid; 890 u32 sta_keepalive_cmd; 891 u32 echo_cmdid; 892 u32 pdev_utf_cmdid; 893 u32 dbglog_cfg_cmdid; 894 u32 pdev_qvit_cmdid; 895 u32 pdev_ftm_intg_cmdid; 896 u32 vdev_set_keepalive_cmdid; 897 u32 vdev_get_keepalive_cmdid; 898 u32 force_fw_hang_cmdid; 899 u32 gpio_config_cmdid; 900 u32 gpio_output_cmdid; 901 u32 pdev_get_temperature_cmdid; 902 u32 vdev_set_wmm_params_cmdid; 903 u32 tdls_set_state_cmdid; 904 u32 tdls_peer_update_cmdid; 905 u32 adaptive_qcs_cmdid; 906 u32 scan_update_request_cmdid; 907 u32 vdev_standby_response_cmdid; 908 u32 vdev_resume_response_cmdid; 909 u32 wlan_peer_caching_add_peer_cmdid; 910 u32 wlan_peer_caching_evict_peer_cmdid; 911 u32 wlan_peer_caching_restore_peer_cmdid; 912 u32 wlan_peer_caching_print_all_peers_info_cmdid; 913 u32 peer_update_wds_entry_cmdid; 914 u32 peer_add_proxy_sta_entry_cmdid; 915 u32 rtt_keepalive_cmdid; 916 u32 oem_req_cmdid; 917 u32 nan_cmdid; 918 u32 vdev_ratemask_cmdid; 919 u32 qboost_cfg_cmdid; 920 u32 pdev_smart_ant_enable_cmdid; 921 u32 pdev_smart_ant_set_rx_antenna_cmdid; 922 u32 peer_smart_ant_set_tx_antenna_cmdid; 923 u32 peer_smart_ant_set_train_info_cmdid; 924 u32 peer_smart_ant_set_node_config_ops_cmdid; 925 u32 pdev_set_antenna_switch_table_cmdid; 926 u32 pdev_set_ctl_table_cmdid; 927 u32 pdev_set_mimogain_table_cmdid; 928 u32 pdev_ratepwr_table_cmdid; 929 u32 pdev_ratepwr_chainmsk_table_cmdid; 930 u32 pdev_fips_cmdid; 931 u32 tt_set_conf_cmdid; 932 u32 fwtest_cmdid; 933 u32 vdev_atf_request_cmdid; 934 u32 peer_atf_request_cmdid; 935 u32 pdev_get_ani_cck_config_cmdid; 936 u32 pdev_get_ani_ofdm_config_cmdid; 937 u32 pdev_reserve_ast_entry_cmdid; 938 u32 pdev_get_nfcal_power_cmdid; 939 u32 pdev_get_tpc_cmdid; 940 u32 pdev_get_ast_info_cmdid; 941 u32 vdev_set_dscp_tid_map_cmdid; 942 u32 pdev_get_info_cmdid; 943 u32 vdev_get_info_cmdid; 944 u32 vdev_filter_neighbor_rx_packets_cmdid; 945 u32 mu_cal_start_cmdid; 946 u32 set_cca_params_cmdid; 947 u32 pdev_bss_chan_info_request_cmdid; 948 u32 pdev_enable_adaptive_cca_cmdid; 949 u32 ext_resource_cfg_cmdid; 950 u32 vdev_set_ie_cmdid; 951 u32 set_lteu_config_cmdid; 952 u32 atf_ssid_grouping_request_cmdid; 953 u32 peer_atf_ext_request_cmdid; 954 u32 set_periodic_channel_stats_cfg_cmdid; 955 u32 peer_bwf_request_cmdid; 956 u32 btcoex_cfg_cmdid; 957 u32 peer_tx_mu_txmit_count_cmdid; 958 u32 peer_tx_mu_txmit_rstcnt_cmdid; 959 u32 peer_gid_userpos_list_cmdid; 960 u32 pdev_check_cal_version_cmdid; 961 u32 coex_version_cfg_cmid; 962 u32 pdev_get_rx_filter_cmdid; 963 u32 pdev_extended_nss_cfg_cmdid; 964 u32 vdev_set_scan_nac_rssi_cmdid; 965 u32 prog_gpio_band_select_cmdid; 966 u32 config_smart_logging_cmdid; 967 u32 debug_fatal_condition_cmdid; 968 u32 get_tsf_timer_cmdid; 969 u32 pdev_get_tpc_table_cmdid; 970 u32 vdev_sifs_trigger_time_cmdid; 971 u32 pdev_wds_entry_list_cmdid; 972 u32 tdls_set_offchan_mode_cmdid; 973 u32 radar_found_cmdid; 974 }; 975 976 /* 977 * wmi command groups. 978 */ 979 enum wmi_cmd_group { 980 /* 0 to 2 are reserved */ 981 WMI_GRP_START = 0x3, 982 WMI_GRP_SCAN = WMI_GRP_START, 983 WMI_GRP_PDEV, 984 WMI_GRP_VDEV, 985 WMI_GRP_PEER, 986 WMI_GRP_MGMT, 987 WMI_GRP_BA_NEG, 988 WMI_GRP_STA_PS, 989 WMI_GRP_DFS, 990 WMI_GRP_ROAM, 991 WMI_GRP_OFL_SCAN, 992 WMI_GRP_P2P, 993 WMI_GRP_AP_PS, 994 WMI_GRP_RATE_CTRL, 995 WMI_GRP_PROFILE, 996 WMI_GRP_SUSPEND, 997 WMI_GRP_BCN_FILTER, 998 WMI_GRP_WOW, 999 WMI_GRP_RTT, 1000 WMI_GRP_SPECTRAL, 1001 WMI_GRP_STATS, 1002 WMI_GRP_ARP_NS_OFL, 1003 WMI_GRP_NLO_OFL, 1004 WMI_GRP_GTK_OFL, 1005 WMI_GRP_CSA_OFL, 1006 WMI_GRP_CHATTER, 1007 WMI_GRP_TID_ADDBA, 1008 WMI_GRP_MISC, 1009 WMI_GRP_GPIO, 1010 }; 1011 1012 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1) 1013 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1) 1014 1015 #define WMI_CMD_UNSUPPORTED 0 1016 1017 /* Command IDs and command events for MAIN FW. */ 1018 enum wmi_cmd_id { 1019 WMI_INIT_CMDID = 0x1, 1020 1021 /* Scan specific commands */ 1022 WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN), 1023 WMI_STOP_SCAN_CMDID, 1024 WMI_SCAN_CHAN_LIST_CMDID, 1025 WMI_SCAN_SCH_PRIO_TBL_CMDID, 1026 1027 /* PDEV (physical device) specific commands */ 1028 WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV), 1029 WMI_PDEV_SET_CHANNEL_CMDID, 1030 WMI_PDEV_SET_PARAM_CMDID, 1031 WMI_PDEV_PKTLOG_ENABLE_CMDID, 1032 WMI_PDEV_PKTLOG_DISABLE_CMDID, 1033 WMI_PDEV_SET_WMM_PARAMS_CMDID, 1034 WMI_PDEV_SET_HT_CAP_IE_CMDID, 1035 WMI_PDEV_SET_VHT_CAP_IE_CMDID, 1036 WMI_PDEV_SET_DSCP_TID_MAP_CMDID, 1037 WMI_PDEV_SET_QUIET_MODE_CMDID, 1038 WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1039 WMI_PDEV_GET_TPC_CONFIG_CMDID, 1040 WMI_PDEV_SET_BASE_MACADDR_CMDID, 1041 1042 /* VDEV (virtual device) specific commands */ 1043 WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV), 1044 WMI_VDEV_DELETE_CMDID, 1045 WMI_VDEV_START_REQUEST_CMDID, 1046 WMI_VDEV_RESTART_REQUEST_CMDID, 1047 WMI_VDEV_UP_CMDID, 1048 WMI_VDEV_STOP_CMDID, 1049 WMI_VDEV_DOWN_CMDID, 1050 WMI_VDEV_SET_PARAM_CMDID, 1051 WMI_VDEV_INSTALL_KEY_CMDID, 1052 1053 /* peer specific commands */ 1054 WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER), 1055 WMI_PEER_DELETE_CMDID, 1056 WMI_PEER_FLUSH_TIDS_CMDID, 1057 WMI_PEER_SET_PARAM_CMDID, 1058 WMI_PEER_ASSOC_CMDID, 1059 WMI_PEER_ADD_WDS_ENTRY_CMDID, 1060 WMI_PEER_REMOVE_WDS_ENTRY_CMDID, 1061 WMI_PEER_MCAST_GROUP_CMDID, 1062 1063 /* beacon/management specific commands */ 1064 WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT), 1065 WMI_PDEV_SEND_BCN_CMDID, 1066 WMI_BCN_TMPL_CMDID, 1067 WMI_BCN_FILTER_RX_CMDID, 1068 WMI_PRB_REQ_FILTER_RX_CMDID, 1069 WMI_MGMT_TX_CMDID, 1070 WMI_PRB_TMPL_CMDID, 1071 1072 /* commands to directly control BA negotiation directly from host. */ 1073 WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG), 1074 WMI_ADDBA_SEND_CMDID, 1075 WMI_ADDBA_STATUS_CMDID, 1076 WMI_DELBA_SEND_CMDID, 1077 WMI_ADDBA_SET_RESP_CMDID, 1078 WMI_SEND_SINGLEAMSDU_CMDID, 1079 1080 /* Station power save specific config */ 1081 WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS), 1082 WMI_STA_POWERSAVE_PARAM_CMDID, 1083 WMI_STA_MIMO_PS_MODE_CMDID, 1084 1085 /** DFS-specific commands */ 1086 WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS), 1087 WMI_PDEV_DFS_DISABLE_CMDID, 1088 1089 /* Roaming specific commands */ 1090 WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM), 1091 WMI_ROAM_SCAN_RSSI_THRESHOLD, 1092 WMI_ROAM_SCAN_PERIOD, 1093 WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1094 WMI_ROAM_AP_PROFILE, 1095 1096 /* offload scan specific commands */ 1097 WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN), 1098 WMI_OFL_SCAN_REMOVE_AP_PROFILE, 1099 WMI_OFL_SCAN_PERIOD, 1100 1101 /* P2P specific commands */ 1102 WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P), 1103 WMI_P2P_DEV_SET_DISCOVERABILITY, 1104 WMI_P2P_GO_SET_BEACON_IE, 1105 WMI_P2P_GO_SET_PROBE_RESP_IE, 1106 WMI_P2P_SET_VENDOR_IE_DATA_CMDID, 1107 1108 /* AP power save specific config */ 1109 WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS), 1110 WMI_AP_PS_PEER_UAPSD_COEX_CMDID, 1111 1112 /* Rate-control specific commands */ 1113 WMI_PEER_RATE_RETRY_SCHED_CMDID = 1114 WMI_CMD_GRP(WMI_GRP_RATE_CTRL), 1115 1116 /* WLAN Profiling commands. */ 1117 WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE), 1118 WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1119 WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1120 WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1121 WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1122 1123 /* Suspend resume command Ids */ 1124 WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND), 1125 WMI_PDEV_RESUME_CMDID, 1126 1127 /* Beacon filter commands */ 1128 WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER), 1129 WMI_RMV_BCN_FILTER_CMDID, 1130 1131 /* WOW Specific WMI commands*/ 1132 WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW), 1133 WMI_WOW_DEL_WAKE_PATTERN_CMDID, 1134 WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1135 WMI_WOW_ENABLE_CMDID, 1136 WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1137 1138 /* RTT measurement related cmd */ 1139 WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT), 1140 WMI_RTT_TSF_CMDID, 1141 1142 /* spectral scan commands */ 1143 WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL), 1144 WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1145 1146 /* F/W stats */ 1147 WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS), 1148 1149 /* ARP OFFLOAD REQUEST*/ 1150 WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL), 1151 1152 /* NS offload confid*/ 1153 WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL), 1154 1155 /* GTK offload Specific WMI commands*/ 1156 WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL), 1157 1158 /* CSA offload Specific WMI commands*/ 1159 WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL), 1160 WMI_CSA_OFFLOAD_CHANSWITCH_CMDID, 1161 1162 /* Chatter commands*/ 1163 WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER), 1164 1165 /* addba specific commands */ 1166 WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA), 1167 WMI_PEER_TID_DELBA_CMDID, 1168 1169 /* set station mimo powersave method */ 1170 WMI_STA_DTIM_PS_METHOD_CMDID, 1171 /* Configure the Station UAPSD AC Auto Trigger Parameters */ 1172 WMI_STA_UAPSD_AUTO_TRIG_CMDID, 1173 1174 /* STA Keep alive parameter configuration, 1175 * Requires WMI_SERVICE_STA_KEEP_ALIVE 1176 */ 1177 WMI_STA_KEEPALIVE_CMD, 1178 1179 /* misc command group */ 1180 WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC), 1181 WMI_PDEV_UTF_CMDID, 1182 WMI_DBGLOG_CFG_CMDID, 1183 WMI_PDEV_QVIT_CMDID, 1184 WMI_PDEV_FTM_INTG_CMDID, 1185 WMI_VDEV_SET_KEEPALIVE_CMDID, 1186 WMI_VDEV_GET_KEEPALIVE_CMDID, 1187 WMI_FORCE_FW_HANG_CMDID, 1188 1189 /* GPIO Configuration */ 1190 WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO), 1191 WMI_GPIO_OUTPUT_CMDID, 1192 }; 1193 1194 enum wmi_event_id { 1195 WMI_SERVICE_READY_EVENTID = 0x1, 1196 WMI_READY_EVENTID, 1197 WMI_SERVICE_AVAILABLE_EVENTID, 1198 1199 /* Scan specific events */ 1200 WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN), 1201 1202 /* PDEV specific events */ 1203 WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV), 1204 WMI_CHAN_INFO_EVENTID, 1205 WMI_PHYERR_EVENTID, 1206 1207 /* VDEV specific events */ 1208 WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV), 1209 WMI_VDEV_STOPPED_EVENTID, 1210 WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID, 1211 1212 /* peer specific events */ 1213 WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER), 1214 1215 /* beacon/mgmt specific events */ 1216 WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT), 1217 WMI_HOST_SWBA_EVENTID, 1218 WMI_TBTTOFFSET_UPDATE_EVENTID, 1219 1220 /* ADDBA Related WMI Events*/ 1221 WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG), 1222 WMI_TX_ADDBA_COMPLETE_EVENTID, 1223 1224 /* Roam event to trigger roaming on host */ 1225 WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM), 1226 WMI_PROFILE_MATCH, 1227 1228 /* WoW */ 1229 WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW), 1230 1231 /* RTT */ 1232 WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT), 1233 WMI_TSF_MEASUREMENT_REPORT_EVENTID, 1234 WMI_RTT_ERROR_REPORT_EVENTID, 1235 1236 /* GTK offload */ 1237 WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL), 1238 WMI_GTK_REKEY_FAIL_EVENTID, 1239 1240 /* CSA IE received event */ 1241 WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL), 1242 1243 /* Misc events */ 1244 WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC), 1245 WMI_PDEV_UTF_EVENTID, 1246 WMI_DEBUG_MESG_EVENTID, 1247 WMI_UPDATE_STATS_EVENTID, 1248 WMI_DEBUG_PRINT_EVENTID, 1249 WMI_DCS_INTERFERENCE_EVENTID, 1250 WMI_PDEV_QVIT_EVENTID, 1251 WMI_WLAN_PROFILE_DATA_EVENTID, 1252 WMI_PDEV_FTM_INTG_EVENTID, 1253 WMI_WLAN_FREQ_AVOID_EVENTID, 1254 WMI_VDEV_GET_KEEPALIVE_EVENTID, 1255 1256 /* GPIO Event */ 1257 WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO), 1258 }; 1259 1260 /* Command IDs and command events for 10.X firmware */ 1261 enum wmi_10x_cmd_id { 1262 WMI_10X_START_CMDID = 0x9000, 1263 WMI_10X_END_CMDID = 0x9FFF, 1264 1265 /* initialize the wlan sub system */ 1266 WMI_10X_INIT_CMDID, 1267 1268 /* Scan specific commands */ 1269 1270 WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID, 1271 WMI_10X_STOP_SCAN_CMDID, 1272 WMI_10X_SCAN_CHAN_LIST_CMDID, 1273 WMI_10X_ECHO_CMDID, 1274 1275 /* PDEV(physical device) specific commands */ 1276 WMI_10X_PDEV_SET_REGDOMAIN_CMDID, 1277 WMI_10X_PDEV_SET_CHANNEL_CMDID, 1278 WMI_10X_PDEV_SET_PARAM_CMDID, 1279 WMI_10X_PDEV_PKTLOG_ENABLE_CMDID, 1280 WMI_10X_PDEV_PKTLOG_DISABLE_CMDID, 1281 WMI_10X_PDEV_SET_WMM_PARAMS_CMDID, 1282 WMI_10X_PDEV_SET_HT_CAP_IE_CMDID, 1283 WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID, 1284 WMI_10X_PDEV_SET_BASE_MACADDR_CMDID, 1285 WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID, 1286 WMI_10X_PDEV_SET_QUIET_MODE_CMDID, 1287 WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1288 WMI_10X_PDEV_GET_TPC_CONFIG_CMDID, 1289 1290 /* VDEV(virtual device) specific commands */ 1291 WMI_10X_VDEV_CREATE_CMDID, 1292 WMI_10X_VDEV_DELETE_CMDID, 1293 WMI_10X_VDEV_START_REQUEST_CMDID, 1294 WMI_10X_VDEV_RESTART_REQUEST_CMDID, 1295 WMI_10X_VDEV_UP_CMDID, 1296 WMI_10X_VDEV_STOP_CMDID, 1297 WMI_10X_VDEV_DOWN_CMDID, 1298 WMI_10X_VDEV_STANDBY_RESPONSE_CMDID, 1299 WMI_10X_VDEV_RESUME_RESPONSE_CMDID, 1300 WMI_10X_VDEV_SET_PARAM_CMDID, 1301 WMI_10X_VDEV_INSTALL_KEY_CMDID, 1302 1303 /* peer specific commands */ 1304 WMI_10X_PEER_CREATE_CMDID, 1305 WMI_10X_PEER_DELETE_CMDID, 1306 WMI_10X_PEER_FLUSH_TIDS_CMDID, 1307 WMI_10X_PEER_SET_PARAM_CMDID, 1308 WMI_10X_PEER_ASSOC_CMDID, 1309 WMI_10X_PEER_ADD_WDS_ENTRY_CMDID, 1310 WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID, 1311 WMI_10X_PEER_MCAST_GROUP_CMDID, 1312 1313 /* beacon/management specific commands */ 1314 1315 WMI_10X_BCN_TX_CMDID, 1316 WMI_10X_BCN_PRB_TMPL_CMDID, 1317 WMI_10X_BCN_FILTER_RX_CMDID, 1318 WMI_10X_PRB_REQ_FILTER_RX_CMDID, 1319 WMI_10X_MGMT_TX_CMDID, 1320 1321 /* commands to directly control ba negotiation directly from host. */ 1322 WMI_10X_ADDBA_CLEAR_RESP_CMDID, 1323 WMI_10X_ADDBA_SEND_CMDID, 1324 WMI_10X_ADDBA_STATUS_CMDID, 1325 WMI_10X_DELBA_SEND_CMDID, 1326 WMI_10X_ADDBA_SET_RESP_CMDID, 1327 WMI_10X_SEND_SINGLEAMSDU_CMDID, 1328 1329 /* Station power save specific config */ 1330 WMI_10X_STA_POWERSAVE_MODE_CMDID, 1331 WMI_10X_STA_POWERSAVE_PARAM_CMDID, 1332 WMI_10X_STA_MIMO_PS_MODE_CMDID, 1333 1334 /* set debug log config */ 1335 WMI_10X_DBGLOG_CFG_CMDID, 1336 1337 /* DFS-specific commands */ 1338 WMI_10X_PDEV_DFS_ENABLE_CMDID, 1339 WMI_10X_PDEV_DFS_DISABLE_CMDID, 1340 1341 /* QVIT specific command id */ 1342 WMI_10X_PDEV_QVIT_CMDID, 1343 1344 /* Offload Scan and Roaming related commands */ 1345 WMI_10X_ROAM_SCAN_MODE, 1346 WMI_10X_ROAM_SCAN_RSSI_THRESHOLD, 1347 WMI_10X_ROAM_SCAN_PERIOD, 1348 WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1349 WMI_10X_ROAM_AP_PROFILE, 1350 WMI_10X_OFL_SCAN_ADD_AP_PROFILE, 1351 WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE, 1352 WMI_10X_OFL_SCAN_PERIOD, 1353 1354 /* P2P specific commands */ 1355 WMI_10X_P2P_DEV_SET_DEVICE_INFO, 1356 WMI_10X_P2P_DEV_SET_DISCOVERABILITY, 1357 WMI_10X_P2P_GO_SET_BEACON_IE, 1358 WMI_10X_P2P_GO_SET_PROBE_RESP_IE, 1359 1360 /* AP power save specific config */ 1361 WMI_10X_AP_PS_PEER_PARAM_CMDID, 1362 WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID, 1363 1364 /* Rate-control specific commands */ 1365 WMI_10X_PEER_RATE_RETRY_SCHED_CMDID, 1366 1367 /* WLAN Profiling commands. */ 1368 WMI_10X_WLAN_PROFILE_TRIGGER_CMDID, 1369 WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1370 WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1371 WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1372 WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1373 1374 /* Suspend resume command Ids */ 1375 WMI_10X_PDEV_SUSPEND_CMDID, 1376 WMI_10X_PDEV_RESUME_CMDID, 1377 1378 /* Beacon filter commands */ 1379 WMI_10X_ADD_BCN_FILTER_CMDID, 1380 WMI_10X_RMV_BCN_FILTER_CMDID, 1381 1382 /* WOW Specific WMI commands*/ 1383 WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID, 1384 WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID, 1385 WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1386 WMI_10X_WOW_ENABLE_CMDID, 1387 WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1388 1389 /* RTT measurement related cmd */ 1390 WMI_10X_RTT_MEASREQ_CMDID, 1391 WMI_10X_RTT_TSF_CMDID, 1392 1393 /* transmit beacon by value */ 1394 WMI_10X_PDEV_SEND_BCN_CMDID, 1395 1396 /* F/W stats */ 1397 WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1398 WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1399 WMI_10X_REQUEST_STATS_CMDID, 1400 1401 /* GPIO Configuration */ 1402 WMI_10X_GPIO_CONFIG_CMDID, 1403 WMI_10X_GPIO_OUTPUT_CMDID, 1404 1405 WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1, 1406 }; 1407 1408 enum wmi_10x_event_id { 1409 WMI_10X_SERVICE_READY_EVENTID = 0x8000, 1410 WMI_10X_READY_EVENTID, 1411 WMI_10X_START_EVENTID = 0x9000, 1412 WMI_10X_END_EVENTID = 0x9FFF, 1413 1414 /* Scan specific events */ 1415 WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID, 1416 WMI_10X_ECHO_EVENTID, 1417 WMI_10X_DEBUG_MESG_EVENTID, 1418 WMI_10X_UPDATE_STATS_EVENTID, 1419 1420 /* Instantaneous RSSI event */ 1421 WMI_10X_INST_RSSI_STATS_EVENTID, 1422 1423 /* VDEV specific events */ 1424 WMI_10X_VDEV_START_RESP_EVENTID, 1425 WMI_10X_VDEV_STANDBY_REQ_EVENTID, 1426 WMI_10X_VDEV_RESUME_REQ_EVENTID, 1427 WMI_10X_VDEV_STOPPED_EVENTID, 1428 1429 /* peer specific events */ 1430 WMI_10X_PEER_STA_KICKOUT_EVENTID, 1431 1432 /* beacon/mgmt specific events */ 1433 WMI_10X_HOST_SWBA_EVENTID, 1434 WMI_10X_TBTTOFFSET_UPDATE_EVENTID, 1435 WMI_10X_MGMT_RX_EVENTID, 1436 1437 /* Channel stats event */ 1438 WMI_10X_CHAN_INFO_EVENTID, 1439 1440 /* PHY Error specific WMI event */ 1441 WMI_10X_PHYERR_EVENTID, 1442 1443 /* Roam event to trigger roaming on host */ 1444 WMI_10X_ROAM_EVENTID, 1445 1446 /* matching AP found from list of profiles */ 1447 WMI_10X_PROFILE_MATCH, 1448 1449 /* debug print message used for tracing FW code while debugging */ 1450 WMI_10X_DEBUG_PRINT_EVENTID, 1451 /* VI spoecific event */ 1452 WMI_10X_PDEV_QVIT_EVENTID, 1453 /* FW code profile data in response to profile request */ 1454 WMI_10X_WLAN_PROFILE_DATA_EVENTID, 1455 1456 /*RTT related event ID*/ 1457 WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID, 1458 WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID, 1459 WMI_10X_RTT_ERROR_REPORT_EVENTID, 1460 1461 WMI_10X_WOW_WAKEUP_HOST_EVENTID, 1462 WMI_10X_DCS_INTERFERENCE_EVENTID, 1463 1464 /* TPC config for the current operating channel */ 1465 WMI_10X_PDEV_TPC_CONFIG_EVENTID, 1466 1467 WMI_10X_GPIO_INPUT_EVENTID, 1468 WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1, 1469 }; 1470 1471 enum wmi_10_2_cmd_id { 1472 WMI_10_2_START_CMDID = 0x9000, 1473 WMI_10_2_END_CMDID = 0x9FFF, 1474 WMI_10_2_INIT_CMDID, 1475 WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID, 1476 WMI_10_2_STOP_SCAN_CMDID, 1477 WMI_10_2_SCAN_CHAN_LIST_CMDID, 1478 WMI_10_2_ECHO_CMDID, 1479 WMI_10_2_PDEV_SET_REGDOMAIN_CMDID, 1480 WMI_10_2_PDEV_SET_CHANNEL_CMDID, 1481 WMI_10_2_PDEV_SET_PARAM_CMDID, 1482 WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID, 1483 WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID, 1484 WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID, 1485 WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID, 1486 WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID, 1487 WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID, 1488 WMI_10_2_PDEV_SET_QUIET_MODE_CMDID, 1489 WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1490 WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID, 1491 WMI_10_2_VDEV_CREATE_CMDID, 1492 WMI_10_2_VDEV_DELETE_CMDID, 1493 WMI_10_2_VDEV_START_REQUEST_CMDID, 1494 WMI_10_2_VDEV_RESTART_REQUEST_CMDID, 1495 WMI_10_2_VDEV_UP_CMDID, 1496 WMI_10_2_VDEV_STOP_CMDID, 1497 WMI_10_2_VDEV_DOWN_CMDID, 1498 WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID, 1499 WMI_10_2_VDEV_RESUME_RESPONSE_CMDID, 1500 WMI_10_2_VDEV_SET_PARAM_CMDID, 1501 WMI_10_2_VDEV_INSTALL_KEY_CMDID, 1502 WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID, 1503 WMI_10_2_PEER_CREATE_CMDID, 1504 WMI_10_2_PEER_DELETE_CMDID, 1505 WMI_10_2_PEER_FLUSH_TIDS_CMDID, 1506 WMI_10_2_PEER_SET_PARAM_CMDID, 1507 WMI_10_2_PEER_ASSOC_CMDID, 1508 WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID, 1509 WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID, 1510 WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID, 1511 WMI_10_2_PEER_MCAST_GROUP_CMDID, 1512 WMI_10_2_BCN_TX_CMDID, 1513 WMI_10_2_BCN_PRB_TMPL_CMDID, 1514 WMI_10_2_BCN_FILTER_RX_CMDID, 1515 WMI_10_2_PRB_REQ_FILTER_RX_CMDID, 1516 WMI_10_2_MGMT_TX_CMDID, 1517 WMI_10_2_ADDBA_CLEAR_RESP_CMDID, 1518 WMI_10_2_ADDBA_SEND_CMDID, 1519 WMI_10_2_ADDBA_STATUS_CMDID, 1520 WMI_10_2_DELBA_SEND_CMDID, 1521 WMI_10_2_ADDBA_SET_RESP_CMDID, 1522 WMI_10_2_SEND_SINGLEAMSDU_CMDID, 1523 WMI_10_2_STA_POWERSAVE_MODE_CMDID, 1524 WMI_10_2_STA_POWERSAVE_PARAM_CMDID, 1525 WMI_10_2_STA_MIMO_PS_MODE_CMDID, 1526 WMI_10_2_DBGLOG_CFG_CMDID, 1527 WMI_10_2_PDEV_DFS_ENABLE_CMDID, 1528 WMI_10_2_PDEV_DFS_DISABLE_CMDID, 1529 WMI_10_2_PDEV_QVIT_CMDID, 1530 WMI_10_2_ROAM_SCAN_MODE, 1531 WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD, 1532 WMI_10_2_ROAM_SCAN_PERIOD, 1533 WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1534 WMI_10_2_ROAM_AP_PROFILE, 1535 WMI_10_2_OFL_SCAN_ADD_AP_PROFILE, 1536 WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE, 1537 WMI_10_2_OFL_SCAN_PERIOD, 1538 WMI_10_2_P2P_DEV_SET_DEVICE_INFO, 1539 WMI_10_2_P2P_DEV_SET_DISCOVERABILITY, 1540 WMI_10_2_P2P_GO_SET_BEACON_IE, 1541 WMI_10_2_P2P_GO_SET_PROBE_RESP_IE, 1542 WMI_10_2_AP_PS_PEER_PARAM_CMDID, 1543 WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID, 1544 WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID, 1545 WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID, 1546 WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1547 WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1548 WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1549 WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1550 WMI_10_2_PDEV_SUSPEND_CMDID, 1551 WMI_10_2_PDEV_RESUME_CMDID, 1552 WMI_10_2_ADD_BCN_FILTER_CMDID, 1553 WMI_10_2_RMV_BCN_FILTER_CMDID, 1554 WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID, 1555 WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID, 1556 WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1557 WMI_10_2_WOW_ENABLE_CMDID, 1558 WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1559 WMI_10_2_RTT_MEASREQ_CMDID, 1560 WMI_10_2_RTT_TSF_CMDID, 1561 WMI_10_2_RTT_KEEPALIVE_CMDID, 1562 WMI_10_2_PDEV_SEND_BCN_CMDID, 1563 WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1564 WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1565 WMI_10_2_REQUEST_STATS_CMDID, 1566 WMI_10_2_GPIO_CONFIG_CMDID, 1567 WMI_10_2_GPIO_OUTPUT_CMDID, 1568 WMI_10_2_VDEV_RATEMASK_CMDID, 1569 WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID, 1570 WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1571 WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1572 WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1573 WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1574 WMI_10_2_FORCE_FW_HANG_CMDID, 1575 WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1576 WMI_10_2_PDEV_SET_CTL_TABLE_CMDID, 1577 WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1578 WMI_10_2_PDEV_RATEPWR_TABLE_CMDID, 1579 WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1580 WMI_10_2_PDEV_GET_INFO, 1581 WMI_10_2_VDEV_GET_INFO, 1582 WMI_10_2_VDEV_ATF_REQUEST_CMDID, 1583 WMI_10_2_PEER_ATF_REQUEST_CMDID, 1584 WMI_10_2_PDEV_GET_TEMPERATURE_CMDID, 1585 WMI_10_2_MU_CAL_START_CMDID, 1586 WMI_10_2_SET_LTEU_CONFIG_CMDID, 1587 WMI_10_2_SET_CCA_PARAMS, 1588 WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1589 WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1, 1590 }; 1591 1592 enum wmi_10_2_event_id { 1593 WMI_10_2_SERVICE_READY_EVENTID = 0x8000, 1594 WMI_10_2_READY_EVENTID, 1595 WMI_10_2_DEBUG_MESG_EVENTID, 1596 WMI_10_2_START_EVENTID = 0x9000, 1597 WMI_10_2_END_EVENTID = 0x9FFF, 1598 WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID, 1599 WMI_10_2_ECHO_EVENTID, 1600 WMI_10_2_UPDATE_STATS_EVENTID, 1601 WMI_10_2_INST_RSSI_STATS_EVENTID, 1602 WMI_10_2_VDEV_START_RESP_EVENTID, 1603 WMI_10_2_VDEV_STANDBY_REQ_EVENTID, 1604 WMI_10_2_VDEV_RESUME_REQ_EVENTID, 1605 WMI_10_2_VDEV_STOPPED_EVENTID, 1606 WMI_10_2_PEER_STA_KICKOUT_EVENTID, 1607 WMI_10_2_HOST_SWBA_EVENTID, 1608 WMI_10_2_TBTTOFFSET_UPDATE_EVENTID, 1609 WMI_10_2_MGMT_RX_EVENTID, 1610 WMI_10_2_CHAN_INFO_EVENTID, 1611 WMI_10_2_PHYERR_EVENTID, 1612 WMI_10_2_ROAM_EVENTID, 1613 WMI_10_2_PROFILE_MATCH, 1614 WMI_10_2_DEBUG_PRINT_EVENTID, 1615 WMI_10_2_PDEV_QVIT_EVENTID, 1616 WMI_10_2_WLAN_PROFILE_DATA_EVENTID, 1617 WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID, 1618 WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID, 1619 WMI_10_2_RTT_ERROR_REPORT_EVENTID, 1620 WMI_10_2_RTT_KEEPALIVE_EVENTID, 1621 WMI_10_2_WOW_WAKEUP_HOST_EVENTID, 1622 WMI_10_2_DCS_INTERFERENCE_EVENTID, 1623 WMI_10_2_PDEV_TPC_CONFIG_EVENTID, 1624 WMI_10_2_GPIO_INPUT_EVENTID, 1625 WMI_10_2_PEER_RATECODE_LIST_EVENTID, 1626 WMI_10_2_GENERIC_BUFFER_EVENTID, 1627 WMI_10_2_MCAST_BUF_RELEASE_EVENTID, 1628 WMI_10_2_MCAST_LIST_AGEOUT_EVENTID, 1629 WMI_10_2_WDS_PEER_EVENTID, 1630 WMI_10_2_PEER_STA_PS_STATECHG_EVENTID, 1631 WMI_10_2_PDEV_TEMPERATURE_EVENTID, 1632 WMI_10_2_MU_REPORT_EVENTID, 1633 WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID, 1634 WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1, 1635 }; 1636 1637 enum wmi_10_4_cmd_id { 1638 WMI_10_4_START_CMDID = 0x9000, 1639 WMI_10_4_END_CMDID = 0x9FFF, 1640 WMI_10_4_INIT_CMDID, 1641 WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID, 1642 WMI_10_4_STOP_SCAN_CMDID, 1643 WMI_10_4_SCAN_CHAN_LIST_CMDID, 1644 WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID, 1645 WMI_10_4_SCAN_UPDATE_REQUEST_CMDID, 1646 WMI_10_4_ECHO_CMDID, 1647 WMI_10_4_PDEV_SET_REGDOMAIN_CMDID, 1648 WMI_10_4_PDEV_SET_CHANNEL_CMDID, 1649 WMI_10_4_PDEV_SET_PARAM_CMDID, 1650 WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID, 1651 WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID, 1652 WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID, 1653 WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID, 1654 WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID, 1655 WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID, 1656 WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID, 1657 WMI_10_4_PDEV_SET_QUIET_MODE_CMDID, 1658 WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1659 WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID, 1660 WMI_10_4_VDEV_CREATE_CMDID, 1661 WMI_10_4_VDEV_DELETE_CMDID, 1662 WMI_10_4_VDEV_START_REQUEST_CMDID, 1663 WMI_10_4_VDEV_RESTART_REQUEST_CMDID, 1664 WMI_10_4_VDEV_UP_CMDID, 1665 WMI_10_4_VDEV_STOP_CMDID, 1666 WMI_10_4_VDEV_DOWN_CMDID, 1667 WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID, 1668 WMI_10_4_VDEV_RESUME_RESPONSE_CMDID, 1669 WMI_10_4_VDEV_SET_PARAM_CMDID, 1670 WMI_10_4_VDEV_INSTALL_KEY_CMDID, 1671 WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID, 1672 WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID, 1673 WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID, 1674 WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID, 1675 WMI_10_4_PEER_CREATE_CMDID, 1676 WMI_10_4_PEER_DELETE_CMDID, 1677 WMI_10_4_PEER_FLUSH_TIDS_CMDID, 1678 WMI_10_4_PEER_SET_PARAM_CMDID, 1679 WMI_10_4_PEER_ASSOC_CMDID, 1680 WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID, 1681 WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID, 1682 WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID, 1683 WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID, 1684 WMI_10_4_PEER_MCAST_GROUP_CMDID, 1685 WMI_10_4_BCN_TX_CMDID, 1686 WMI_10_4_PDEV_SEND_BCN_CMDID, 1687 WMI_10_4_BCN_PRB_TMPL_CMDID, 1688 WMI_10_4_BCN_FILTER_RX_CMDID, 1689 WMI_10_4_PRB_REQ_FILTER_RX_CMDID, 1690 WMI_10_4_MGMT_TX_CMDID, 1691 WMI_10_4_PRB_TMPL_CMDID, 1692 WMI_10_4_ADDBA_CLEAR_RESP_CMDID, 1693 WMI_10_4_ADDBA_SEND_CMDID, 1694 WMI_10_4_ADDBA_STATUS_CMDID, 1695 WMI_10_4_DELBA_SEND_CMDID, 1696 WMI_10_4_ADDBA_SET_RESP_CMDID, 1697 WMI_10_4_SEND_SINGLEAMSDU_CMDID, 1698 WMI_10_4_STA_POWERSAVE_MODE_CMDID, 1699 WMI_10_4_STA_POWERSAVE_PARAM_CMDID, 1700 WMI_10_4_STA_MIMO_PS_MODE_CMDID, 1701 WMI_10_4_DBGLOG_CFG_CMDID, 1702 WMI_10_4_PDEV_DFS_ENABLE_CMDID, 1703 WMI_10_4_PDEV_DFS_DISABLE_CMDID, 1704 WMI_10_4_PDEV_QVIT_CMDID, 1705 WMI_10_4_ROAM_SCAN_MODE, 1706 WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD, 1707 WMI_10_4_ROAM_SCAN_PERIOD, 1708 WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1709 WMI_10_4_ROAM_AP_PROFILE, 1710 WMI_10_4_OFL_SCAN_ADD_AP_PROFILE, 1711 WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE, 1712 WMI_10_4_OFL_SCAN_PERIOD, 1713 WMI_10_4_P2P_DEV_SET_DEVICE_INFO, 1714 WMI_10_4_P2P_DEV_SET_DISCOVERABILITY, 1715 WMI_10_4_P2P_GO_SET_BEACON_IE, 1716 WMI_10_4_P2P_GO_SET_PROBE_RESP_IE, 1717 WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID, 1718 WMI_10_4_AP_PS_PEER_PARAM_CMDID, 1719 WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID, 1720 WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID, 1721 WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID, 1722 WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1723 WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1724 WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1725 WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1726 WMI_10_4_PDEV_SUSPEND_CMDID, 1727 WMI_10_4_PDEV_RESUME_CMDID, 1728 WMI_10_4_ADD_BCN_FILTER_CMDID, 1729 WMI_10_4_RMV_BCN_FILTER_CMDID, 1730 WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID, 1731 WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID, 1732 WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1733 WMI_10_4_WOW_ENABLE_CMDID, 1734 WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1735 WMI_10_4_RTT_MEASREQ_CMDID, 1736 WMI_10_4_RTT_TSF_CMDID, 1737 WMI_10_4_RTT_KEEPALIVE_CMDID, 1738 WMI_10_4_OEM_REQ_CMDID, 1739 WMI_10_4_NAN_CMDID, 1740 WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1741 WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1742 WMI_10_4_REQUEST_STATS_CMDID, 1743 WMI_10_4_GPIO_CONFIG_CMDID, 1744 WMI_10_4_GPIO_OUTPUT_CMDID, 1745 WMI_10_4_VDEV_RATEMASK_CMDID, 1746 WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID, 1747 WMI_10_4_GTK_OFFLOAD_CMDID, 1748 WMI_10_4_QBOOST_CFG_CMDID, 1749 WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID, 1750 WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID, 1751 WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1752 WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1753 WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1754 WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1755 WMI_10_4_VDEV_SET_KEEPALIVE_CMDID, 1756 WMI_10_4_VDEV_GET_KEEPALIVE_CMDID, 1757 WMI_10_4_FORCE_FW_HANG_CMDID, 1758 WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1759 WMI_10_4_PDEV_SET_CTL_TABLE_CMDID, 1760 WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1761 WMI_10_4_PDEV_RATEPWR_TABLE_CMDID, 1762 WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1763 WMI_10_4_PDEV_FIPS_CMDID, 1764 WMI_10_4_TT_SET_CONF_CMDID, 1765 WMI_10_4_FWTEST_CMDID, 1766 WMI_10_4_VDEV_ATF_REQUEST_CMDID, 1767 WMI_10_4_PEER_ATF_REQUEST_CMDID, 1768 WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID, 1769 WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID, 1770 WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID, 1771 WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID, 1772 WMI_10_4_PDEV_GET_TPC_CMDID, 1773 WMI_10_4_PDEV_GET_AST_INFO_CMDID, 1774 WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID, 1775 WMI_10_4_PDEV_GET_TEMPERATURE_CMDID, 1776 WMI_10_4_PDEV_GET_INFO_CMDID, 1777 WMI_10_4_VDEV_GET_INFO_CMDID, 1778 WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID, 1779 WMI_10_4_MU_CAL_START_CMDID, 1780 WMI_10_4_SET_CCA_PARAMS_CMDID, 1781 WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1782 WMI_10_4_EXT_RESOURCE_CFG_CMDID, 1783 WMI_10_4_VDEV_SET_IE_CMDID, 1784 WMI_10_4_SET_LTEU_CONFIG_CMDID, 1785 WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID, 1786 WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID, 1787 WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG, 1788 WMI_10_4_PEER_BWF_REQUEST_CMDID, 1789 WMI_10_4_BTCOEX_CFG_CMDID, 1790 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID, 1791 WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID, 1792 WMI_10_4_PEER_GID_USERPOS_LIST_CMDID, 1793 WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID, 1794 WMI_10_4_COEX_VERSION_CFG_CMID, 1795 WMI_10_4_PDEV_GET_RX_FILTER_CMDID, 1796 WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID, 1797 WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID, 1798 WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID, 1799 WMI_10_4_CONFIG_SMART_LOGGING_CMDID, 1800 WMI_10_4_DEBUG_FATAL_CONDITION_CMDID, 1801 WMI_10_4_GET_TSF_TIMER_CMDID, 1802 WMI_10_4_PDEV_GET_TPC_TABLE_CMDID, 1803 WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID, 1804 WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID, 1805 WMI_10_4_TDLS_SET_STATE_CMDID, 1806 WMI_10_4_TDLS_PEER_UPDATE_CMDID, 1807 WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID, 1808 WMI_10_4_PDEV_SEND_FD_CMDID, 1809 WMI_10_4_ENABLE_FILS_CMDID, 1810 WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID, 1811 WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID, 1812 WMI_10_4_RADAR_FOUND_CMDID, 1813 WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1, 1814 }; 1815 1816 enum wmi_10_4_event_id { 1817 WMI_10_4_SERVICE_READY_EVENTID = 0x8000, 1818 WMI_10_4_READY_EVENTID, 1819 WMI_10_4_DEBUG_MESG_EVENTID, 1820 WMI_10_4_START_EVENTID = 0x9000, 1821 WMI_10_4_END_EVENTID = 0x9FFF, 1822 WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID, 1823 WMI_10_4_ECHO_EVENTID, 1824 WMI_10_4_UPDATE_STATS_EVENTID, 1825 WMI_10_4_INST_RSSI_STATS_EVENTID, 1826 WMI_10_4_VDEV_START_RESP_EVENTID, 1827 WMI_10_4_VDEV_STANDBY_REQ_EVENTID, 1828 WMI_10_4_VDEV_RESUME_REQ_EVENTID, 1829 WMI_10_4_VDEV_STOPPED_EVENTID, 1830 WMI_10_4_PEER_STA_KICKOUT_EVENTID, 1831 WMI_10_4_HOST_SWBA_EVENTID, 1832 WMI_10_4_TBTTOFFSET_UPDATE_EVENTID, 1833 WMI_10_4_MGMT_RX_EVENTID, 1834 WMI_10_4_CHAN_INFO_EVENTID, 1835 WMI_10_4_PHYERR_EVENTID, 1836 WMI_10_4_ROAM_EVENTID, 1837 WMI_10_4_PROFILE_MATCH, 1838 WMI_10_4_DEBUG_PRINT_EVENTID, 1839 WMI_10_4_PDEV_QVIT_EVENTID, 1840 WMI_10_4_WLAN_PROFILE_DATA_EVENTID, 1841 WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID, 1842 WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID, 1843 WMI_10_4_RTT_ERROR_REPORT_EVENTID, 1844 WMI_10_4_RTT_KEEPALIVE_EVENTID, 1845 WMI_10_4_OEM_CAPABILITY_EVENTID, 1846 WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID, 1847 WMI_10_4_OEM_ERROR_REPORT_EVENTID, 1848 WMI_10_4_NAN_EVENTID, 1849 WMI_10_4_WOW_WAKEUP_HOST_EVENTID, 1850 WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID, 1851 WMI_10_4_GTK_REKEY_FAIL_EVENTID, 1852 WMI_10_4_DCS_INTERFERENCE_EVENTID, 1853 WMI_10_4_PDEV_TPC_CONFIG_EVENTID, 1854 WMI_10_4_CSA_HANDLING_EVENTID, 1855 WMI_10_4_GPIO_INPUT_EVENTID, 1856 WMI_10_4_PEER_RATECODE_LIST_EVENTID, 1857 WMI_10_4_GENERIC_BUFFER_EVENTID, 1858 WMI_10_4_MCAST_BUF_RELEASE_EVENTID, 1859 WMI_10_4_MCAST_LIST_AGEOUT_EVENTID, 1860 WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID, 1861 WMI_10_4_WDS_PEER_EVENTID, 1862 WMI_10_4_PEER_STA_PS_STATECHG_EVENTID, 1863 WMI_10_4_PDEV_FIPS_EVENTID, 1864 WMI_10_4_TT_STATS_EVENTID, 1865 WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID, 1866 WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID, 1867 WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID, 1868 WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID, 1869 WMI_10_4_PDEV_NFCAL_POWER_EVENTID, 1870 WMI_10_4_PDEV_TPC_EVENTID, 1871 WMI_10_4_PDEV_GET_AST_INFO_EVENTID, 1872 WMI_10_4_PDEV_TEMPERATURE_EVENTID, 1873 WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID, 1874 WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID, 1875 WMI_10_4_MU_REPORT_EVENTID, 1876 WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID, 1877 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID, 1878 WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID, 1879 WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID, 1880 WMI_10_4_ATF_PEER_STATS_EVENTID, 1881 WMI_10_4_PDEV_GET_RX_FILTER_EVENTID, 1882 WMI_10_4_NAC_RSSI_EVENTID, 1883 WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID, 1884 WMI_10_4_GET_TSF_TIMER_RESP_EVENTID, 1885 WMI_10_4_PDEV_TPC_TABLE_EVENTID, 1886 WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID, 1887 WMI_10_4_TDLS_PEER_EVENTID, 1888 WMI_10_4_HOST_SWFDA_EVENTID, 1889 WMI_10_4_ESP_ESTIMATE_EVENTID, 1890 WMI_10_4_DFS_STATUS_CHECK_EVENTID, 1891 WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1, 1892 }; 1893 1894 enum wmi_phy_mode { 1895 MODE_11A = 0, /* 11a Mode */ 1896 MODE_11G = 1, /* 11b/g Mode */ 1897 MODE_11B = 2, /* 11b Mode */ 1898 MODE_11GONLY = 3, /* 11g only Mode */ 1899 MODE_11NA_HT20 = 4, /* 11a HT20 mode */ 1900 MODE_11NG_HT20 = 5, /* 11g HT20 mode */ 1901 MODE_11NA_HT40 = 6, /* 11a HT40 mode */ 1902 MODE_11NG_HT40 = 7, /* 11g HT40 mode */ 1903 MODE_11AC_VHT20 = 8, 1904 MODE_11AC_VHT40 = 9, 1905 MODE_11AC_VHT80 = 10, 1906 /* MODE_11AC_VHT160 = 11, */ 1907 MODE_11AC_VHT20_2G = 11, 1908 MODE_11AC_VHT40_2G = 12, 1909 MODE_11AC_VHT80_2G = 13, 1910 MODE_11AC_VHT80_80 = 14, 1911 MODE_11AC_VHT160 = 15, 1912 MODE_UNKNOWN = 16, 1913 MODE_MAX = 16 1914 }; 1915 1916 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode) 1917 { 1918 switch (mode) { 1919 case MODE_11A: 1920 return "11a"; 1921 case MODE_11G: 1922 return "11g"; 1923 case MODE_11B: 1924 return "11b"; 1925 case MODE_11GONLY: 1926 return "11gonly"; 1927 case MODE_11NA_HT20: 1928 return "11na-ht20"; 1929 case MODE_11NG_HT20: 1930 return "11ng-ht20"; 1931 case MODE_11NA_HT40: 1932 return "11na-ht40"; 1933 case MODE_11NG_HT40: 1934 return "11ng-ht40"; 1935 case MODE_11AC_VHT20: 1936 return "11ac-vht20"; 1937 case MODE_11AC_VHT40: 1938 return "11ac-vht40"; 1939 case MODE_11AC_VHT80: 1940 return "11ac-vht80"; 1941 case MODE_11AC_VHT160: 1942 return "11ac-vht160"; 1943 case MODE_11AC_VHT80_80: 1944 return "11ac-vht80+80"; 1945 case MODE_11AC_VHT20_2G: 1946 return "11ac-vht20-2g"; 1947 case MODE_11AC_VHT40_2G: 1948 return "11ac-vht40-2g"; 1949 case MODE_11AC_VHT80_2G: 1950 return "11ac-vht80-2g"; 1951 case MODE_UNKNOWN: 1952 /* skip */ 1953 break; 1954 1955 /* no default handler to allow compiler to check that the 1956 * enum is fully handled 1957 */ 1958 }; 1959 1960 return "<unknown>"; 1961 } 1962 1963 #define WMI_CHAN_LIST_TAG 0x1 1964 #define WMI_SSID_LIST_TAG 0x2 1965 #define WMI_BSSID_LIST_TAG 0x3 1966 #define WMI_IE_TAG 0x4 1967 1968 struct wmi_channel { 1969 __le32 mhz; 1970 __le32 band_center_freq1; 1971 __le32 band_center_freq2; /* valid for 11ac, 80plus80 */ 1972 union { 1973 __le32 flags; /* WMI_CHAN_FLAG_ */ 1974 struct { 1975 u8 mode; /* only 6 LSBs */ 1976 } __packed; 1977 } __packed; 1978 union { 1979 __le32 reginfo0; 1980 struct { 1981 /* note: power unit is 0.5 dBm */ 1982 u8 min_power; 1983 u8 max_power; 1984 u8 reg_power; 1985 u8 reg_classid; 1986 } __packed; 1987 } __packed; 1988 union { 1989 __le32 reginfo1; 1990 struct { 1991 u8 antenna_max; 1992 u8 max_tx_power; 1993 } __packed; 1994 } __packed; 1995 } __packed; 1996 1997 struct wmi_channel_arg { 1998 u32 freq; 1999 u32 band_center_freq1; 2000 u32 band_center_freq2; 2001 bool passive; 2002 bool allow_ibss; 2003 bool allow_ht; 2004 bool allow_vht; 2005 bool ht40plus; 2006 bool chan_radar; 2007 /* note: power unit is 0.5 dBm */ 2008 u32 min_power; 2009 u32 max_power; 2010 u32 max_reg_power; 2011 u32 max_antenna_gain; 2012 u32 reg_class_id; 2013 enum wmi_phy_mode mode; 2014 }; 2015 2016 enum wmi_channel_change_cause { 2017 WMI_CHANNEL_CHANGE_CAUSE_NONE = 0, 2018 WMI_CHANNEL_CHANGE_CAUSE_CSA, 2019 }; 2020 2021 #define WMI_CHAN_FLAG_HT40_PLUS (1 << 6) 2022 #define WMI_CHAN_FLAG_PASSIVE (1 << 7) 2023 #define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8) 2024 #define WMI_CHAN_FLAG_AP_DISABLED (1 << 9) 2025 #define WMI_CHAN_FLAG_DFS (1 << 10) 2026 #define WMI_CHAN_FLAG_ALLOW_HT (1 << 11) 2027 #define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12) 2028 2029 /* Indicate reason for channel switch */ 2030 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13) 2031 2032 #define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */ 2033 2034 /* HT Capabilities*/ 2035 #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ 2036 #define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */ 2037 #define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ 2038 #define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ 2039 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3 2040 #define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ 2041 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4 2042 #define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */ 2043 #define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ 2044 #define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ 2045 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 2046 #define WMI_HT_CAP_HT40_SGI 0x0800 2047 2048 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \ 2049 WMI_HT_CAP_HT20_SGI | \ 2050 WMI_HT_CAP_HT40_SGI | \ 2051 WMI_HT_CAP_TX_STBC | \ 2052 WMI_HT_CAP_RX_STBC | \ 2053 WMI_HT_CAP_LDPC) 2054 2055 /* 2056 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information 2057 * field. The fields not defined here are not supported, or reserved. 2058 * Do not change these masks and if you have to add new one follow the 2059 * bitmask as specified by 802.11ac draft. 2060 */ 2061 2062 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 2063 #define WMI_VHT_CAP_RX_LDPC 0x00000010 2064 #define WMI_VHT_CAP_SGI_80MHZ 0x00000020 2065 #define WMI_VHT_CAP_SGI_160MHZ 0x00000040 2066 #define WMI_VHT_CAP_TX_STBC 0x00000080 2067 #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300 2068 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8 2069 #define WMI_VHT_CAP_SU_BFER 0x00000800 2070 #define WMI_VHT_CAP_SU_BFEE 0x00001000 2071 #define WMI_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000 2072 #define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13 2073 #define WMI_VHT_CAP_MAX_SND_DIM_MASK 0x00070000 2074 #define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16 2075 #define WMI_VHT_CAP_MU_BFER 0x00080000 2076 #define WMI_VHT_CAP_MU_BFEE 0x00100000 2077 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 2078 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23 2079 #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000 2080 #define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000 2081 2082 /* The following also refer for max HT AMSDU */ 2083 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000 2084 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001 2085 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 2086 2087 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \ 2088 WMI_VHT_CAP_RX_LDPC | \ 2089 WMI_VHT_CAP_SGI_80MHZ | \ 2090 WMI_VHT_CAP_TX_STBC | \ 2091 WMI_VHT_CAP_RX_STBC_MASK | \ 2092 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \ 2093 WMI_VHT_CAP_RX_FIXED_ANT | \ 2094 WMI_VHT_CAP_TX_FIXED_ANT) 2095 2096 /* 2097 * Interested readers refer to Rx/Tx MCS Map definition as defined in 2098 * 802.11ac 2099 */ 2100 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) 2101 #define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 2102 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 2103 2104 enum { 2105 REGDMN_MODE_11A = 0x00001, /* 11a channels */ 2106 REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */ 2107 REGDMN_MODE_11B = 0x00004, /* 11b channels */ 2108 REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */ 2109 REGDMN_MODE_11G = 0x00008, /* XXX historical */ 2110 REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */ 2111 REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */ 2112 REGDMN_MODE_XR = 0x00100, /* XR channels */ 2113 REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */ 2114 REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */ 2115 REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */ 2116 REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */ 2117 REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */ 2118 REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */ 2119 REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */ 2120 REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */ 2121 REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */ 2122 REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */ 2123 REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */ 2124 REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */ 2125 REGDMN_MODE_11AC_VHT160 = 0x200000, /* 5Ghz, VHT160 channels */ 2126 REGDMN_MODE_11AC_VHT80_80 = 0x400000, /* 5Ghz, VHT80+80 channels */ 2127 REGDMN_MODE_ALL = 0xffffffff 2128 }; 2129 2130 #define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001 2131 #define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002 2132 #define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004 2133 2134 /* regulatory capabilities */ 2135 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040 2136 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080 2137 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100 2138 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200 2139 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400 2140 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800 2141 2142 struct hal_reg_capabilities { 2143 /* regdomain value specified in EEPROM */ 2144 __le32 eeprom_rd; 2145 /*regdomain */ 2146 __le32 eeprom_rd_ext; 2147 /* CAP1 capabilities bit map. */ 2148 __le32 regcap1; 2149 /* REGDMN EEPROM CAP. */ 2150 __le32 regcap2; 2151 /* REGDMN MODE */ 2152 __le32 wireless_modes; 2153 __le32 low_2ghz_chan; 2154 __le32 high_2ghz_chan; 2155 __le32 low_5ghz_chan; 2156 __le32 high_5ghz_chan; 2157 } __packed; 2158 2159 enum wlan_mode_capability { 2160 WHAL_WLAN_11A_CAPABILITY = 0x1, 2161 WHAL_WLAN_11G_CAPABILITY = 0x2, 2162 WHAL_WLAN_11AG_CAPABILITY = 0x3, 2163 }; 2164 2165 /* structure used by FW for requesting host memory */ 2166 struct wlan_host_mem_req { 2167 /* ID of the request */ 2168 __le32 req_id; 2169 /* size of the of each unit */ 2170 __le32 unit_size; 2171 /* flags to indicate that 2172 * the number units is dependent 2173 * on number of resources(num vdevs num peers .. etc) 2174 */ 2175 __le32 num_unit_info; 2176 /* 2177 * actual number of units to allocate . if flags in the num_unit_info 2178 * indicate that number of units is tied to number of a particular 2179 * resource to allocate then num_units filed is set to 0 and host 2180 * will derive the number units from number of the resources it is 2181 * requesting. 2182 */ 2183 __le32 num_units; 2184 } __packed; 2185 2186 /* 2187 * The following struct holds optional payload for 2188 * wmi_service_ready_event,e.g., 11ac pass some of the 2189 * device capability to the host. 2190 */ 2191 struct wmi_service_ready_event { 2192 __le32 sw_version; 2193 __le32 sw_version_1; 2194 __le32 abi_version; 2195 /* WMI_PHY_CAPABILITY */ 2196 __le32 phy_capability; 2197 /* Maximum number of frag table entries that SW will populate less 1 */ 2198 __le32 max_frag_entry; 2199 __le32 wmi_service_bitmap[16]; 2200 __le32 num_rf_chains; 2201 /* 2202 * The following field is only valid for service type 2203 * WMI_SERVICE_11AC 2204 */ 2205 __le32 ht_cap_info; /* WMI HT Capability */ 2206 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2207 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2208 __le32 hw_min_tx_power; 2209 __le32 hw_max_tx_power; 2210 struct hal_reg_capabilities hal_reg_capabilities; 2211 __le32 sys_cap_info; 2212 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2213 /* 2214 * Max beacon and Probe Response IE offload size 2215 * (includes optional P2P IEs) 2216 */ 2217 __le32 max_bcn_ie_size; 2218 /* 2219 * request to host to allocate a chuck of memory and pss it down to FW 2220 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2221 * data structures. Only valid for low latency interfaces like PCIE 2222 * where FW can access this memory directly (or) by DMA. 2223 */ 2224 __le32 num_mem_reqs; 2225 struct wlan_host_mem_req mem_reqs[0]; 2226 } __packed; 2227 2228 /* This is the definition from 10.X firmware branch */ 2229 struct wmi_10x_service_ready_event { 2230 __le32 sw_version; 2231 __le32 abi_version; 2232 2233 /* WMI_PHY_CAPABILITY */ 2234 __le32 phy_capability; 2235 2236 /* Maximum number of frag table entries that SW will populate less 1 */ 2237 __le32 max_frag_entry; 2238 __le32 wmi_service_bitmap[16]; 2239 __le32 num_rf_chains; 2240 2241 /* 2242 * The following field is only valid for service type 2243 * WMI_SERVICE_11AC 2244 */ 2245 __le32 ht_cap_info; /* WMI HT Capability */ 2246 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2247 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2248 __le32 hw_min_tx_power; 2249 __le32 hw_max_tx_power; 2250 2251 struct hal_reg_capabilities hal_reg_capabilities; 2252 2253 __le32 sys_cap_info; 2254 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2255 2256 /* 2257 * request to host to allocate a chuck of memory and pss it down to FW 2258 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2259 * data structures. Only valid for low latency interfaces like PCIE 2260 * where FW can access this memory directly (or) by DMA. 2261 */ 2262 __le32 num_mem_reqs; 2263 2264 struct wlan_host_mem_req mem_reqs[0]; 2265 } __packed; 2266 2267 #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ) 2268 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ) 2269 2270 struct wmi_ready_event { 2271 __le32 sw_version; 2272 __le32 abi_version; 2273 struct wmi_mac_addr mac_addr; 2274 __le32 status; 2275 } __packed; 2276 2277 struct wmi_resource_config { 2278 /* number of virtual devices (VAPs) to support */ 2279 __le32 num_vdevs; 2280 2281 /* number of peer nodes to support */ 2282 __le32 num_peers; 2283 2284 /* 2285 * In offload mode target supports features like WOW, chatter and 2286 * other protocol offloads. In order to support them some 2287 * functionalities like reorder buffering, PN checking need to be 2288 * done in target. This determines maximum number of peers supported 2289 * by target in offload mode 2290 */ 2291 __le32 num_offload_peers; 2292 2293 /* For target-based RX reordering */ 2294 __le32 num_offload_reorder_bufs; 2295 2296 /* number of keys per peer */ 2297 __le32 num_peer_keys; 2298 2299 /* total number of TX/RX data TIDs */ 2300 __le32 num_tids; 2301 2302 /* 2303 * max skid for resolving hash collisions 2304 * 2305 * The address search table is sparse, so that if two MAC addresses 2306 * result in the same hash value, the second of these conflicting 2307 * entries can slide to the next index in the address search table, 2308 * and use it, if it is unoccupied. This ast_skid_limit parameter 2309 * specifies the upper bound on how many subsequent indices to search 2310 * over to find an unoccupied space. 2311 */ 2312 __le32 ast_skid_limit; 2313 2314 /* 2315 * the nominal chain mask for transmit 2316 * 2317 * The chain mask may be modified dynamically, e.g. to operate AP 2318 * tx with a reduced number of chains if no clients are associated. 2319 * This configuration parameter specifies the nominal chain-mask that 2320 * should be used when not operating with a reduced set of tx chains. 2321 */ 2322 __le32 tx_chain_mask; 2323 2324 /* 2325 * the nominal chain mask for receive 2326 * 2327 * The chain mask may be modified dynamically, e.g. for a client 2328 * to use a reduced number of chains for receive if the traffic to 2329 * the client is low enough that it doesn't require downlink MIMO 2330 * or antenna diversity. 2331 * This configuration parameter specifies the nominal chain-mask that 2332 * should be used when not operating with a reduced set of rx chains. 2333 */ 2334 __le32 rx_chain_mask; 2335 2336 /* 2337 * what rx reorder timeout (ms) to use for the AC 2338 * 2339 * Each WMM access class (voice, video, best-effort, background) will 2340 * have its own timeout value to dictate how long to wait for missing 2341 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2342 * already been received. 2343 * This parameter specifies the timeout in milliseconds for each 2344 * class. 2345 */ 2346 __le32 rx_timeout_pri_vi; 2347 __le32 rx_timeout_pri_vo; 2348 __le32 rx_timeout_pri_be; 2349 __le32 rx_timeout_pri_bk; 2350 2351 /* 2352 * what mode the rx should decap packets to 2353 * 2354 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2355 * THis setting also determines the default TX behavior, however TX 2356 * behavior can be modified on a per VAP basis during VAP init 2357 */ 2358 __le32 rx_decap_mode; 2359 2360 /* what is the maximum number of scan requests that can be queued */ 2361 __le32 scan_max_pending_reqs; 2362 2363 /* maximum VDEV that could use BMISS offload */ 2364 __le32 bmiss_offload_max_vdev; 2365 2366 /* maximum VDEV that could use offload roaming */ 2367 __le32 roam_offload_max_vdev; 2368 2369 /* maximum AP profiles that would push to offload roaming */ 2370 __le32 roam_offload_max_ap_profiles; 2371 2372 /* 2373 * how many groups to use for mcast->ucast conversion 2374 * 2375 * The target's WAL maintains a table to hold information regarding 2376 * which peers belong to a given multicast group, so that if 2377 * multicast->unicast conversion is enabled, the target can convert 2378 * multicast tx frames to a series of unicast tx frames, to each 2379 * peer within the multicast group. 2380 This num_mcast_groups configuration parameter tells the target how 2381 * many multicast groups to provide storage for within its multicast 2382 * group membership table. 2383 */ 2384 __le32 num_mcast_groups; 2385 2386 /* 2387 * size to alloc for the mcast membership table 2388 * 2389 * This num_mcast_table_elems configuration parameter tells the 2390 * target how many peer elements it needs to provide storage for in 2391 * its multicast group membership table. 2392 * These multicast group membership table elements are shared by the 2393 * multicast groups stored within the table. 2394 */ 2395 __le32 num_mcast_table_elems; 2396 2397 /* 2398 * whether/how to do multicast->unicast conversion 2399 * 2400 * This configuration parameter specifies whether the target should 2401 * perform multicast --> unicast conversion on transmit, and if so, 2402 * what to do if it finds no entries in its multicast group 2403 * membership table for the multicast IP address in the tx frame. 2404 * Configuration value: 2405 * 0 -> Do not perform multicast to unicast conversion. 2406 * 1 -> Convert multicast frames to unicast, if the IP multicast 2407 * address from the tx frame is found in the multicast group 2408 * membership table. If the IP multicast address is not found, 2409 * drop the frame. 2410 * 2 -> Convert multicast frames to unicast, if the IP multicast 2411 * address from the tx frame is found in the multicast group 2412 * membership table. If the IP multicast address is not found, 2413 * transmit the frame as multicast. 2414 */ 2415 __le32 mcast2ucast_mode; 2416 2417 /* 2418 * how much memory to allocate for a tx PPDU dbg log 2419 * 2420 * This parameter controls how much memory the target will allocate 2421 * to store a log of tx PPDU meta-information (how large the PPDU 2422 * was, when it was sent, whether it was successful, etc.) 2423 */ 2424 __le32 tx_dbg_log_size; 2425 2426 /* how many AST entries to be allocated for WDS */ 2427 __le32 num_wds_entries; 2428 2429 /* 2430 * MAC DMA burst size, e.g., For target PCI limit can be 2431 * 0 -default, 1 256B 2432 */ 2433 __le32 dma_burst_size; 2434 2435 /* 2436 * Fixed delimiters to be inserted after every MPDU to 2437 * account for interface latency to avoid underrun. 2438 */ 2439 __le32 mac_aggr_delim; 2440 2441 /* 2442 * determine whether target is responsible for detecting duplicate 2443 * non-aggregate MPDU and timing out stale fragments. 2444 * 2445 * A-MPDU reordering is always performed on the target. 2446 * 2447 * 0: target responsible for frag timeout and dup checking 2448 * 1: host responsible for frag timeout and dup checking 2449 */ 2450 __le32 rx_skip_defrag_timeout_dup_detection_check; 2451 2452 /* 2453 * Configuration for VoW : 2454 * No of Video Nodes to be supported 2455 * and Max no of descriptors for each Video link (node). 2456 */ 2457 __le32 vow_config; 2458 2459 /* maximum VDEV that could use GTK offload */ 2460 __le32 gtk_offload_max_vdev; 2461 2462 /* Number of msdu descriptors target should use */ 2463 __le32 num_msdu_desc; 2464 2465 /* 2466 * Max. number of Tx fragments per MSDU 2467 * This parameter controls the max number of Tx fragments per MSDU. 2468 * This is sent by the target as part of the WMI_SERVICE_READY event 2469 * and is overridden by the OS shim as required. 2470 */ 2471 __le32 max_frag_entries; 2472 } __packed; 2473 2474 struct wmi_resource_config_10x { 2475 /* number of virtual devices (VAPs) to support */ 2476 __le32 num_vdevs; 2477 2478 /* number of peer nodes to support */ 2479 __le32 num_peers; 2480 2481 /* number of keys per peer */ 2482 __le32 num_peer_keys; 2483 2484 /* total number of TX/RX data TIDs */ 2485 __le32 num_tids; 2486 2487 /* 2488 * max skid for resolving hash collisions 2489 * 2490 * The address search table is sparse, so that if two MAC addresses 2491 * result in the same hash value, the second of these conflicting 2492 * entries can slide to the next index in the address search table, 2493 * and use it, if it is unoccupied. This ast_skid_limit parameter 2494 * specifies the upper bound on how many subsequent indices to search 2495 * over to find an unoccupied space. 2496 */ 2497 __le32 ast_skid_limit; 2498 2499 /* 2500 * the nominal chain mask for transmit 2501 * 2502 * The chain mask may be modified dynamically, e.g. to operate AP 2503 * tx with a reduced number of chains if no clients are associated. 2504 * This configuration parameter specifies the nominal chain-mask that 2505 * should be used when not operating with a reduced set of tx chains. 2506 */ 2507 __le32 tx_chain_mask; 2508 2509 /* 2510 * the nominal chain mask for receive 2511 * 2512 * The chain mask may be modified dynamically, e.g. for a client 2513 * to use a reduced number of chains for receive if the traffic to 2514 * the client is low enough that it doesn't require downlink MIMO 2515 * or antenna diversity. 2516 * This configuration parameter specifies the nominal chain-mask that 2517 * should be used when not operating with a reduced set of rx chains. 2518 */ 2519 __le32 rx_chain_mask; 2520 2521 /* 2522 * what rx reorder timeout (ms) to use for the AC 2523 * 2524 * Each WMM access class (voice, video, best-effort, background) will 2525 * have its own timeout value to dictate how long to wait for missing 2526 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2527 * already been received. 2528 * This parameter specifies the timeout in milliseconds for each 2529 * class. 2530 */ 2531 __le32 rx_timeout_pri_vi; 2532 __le32 rx_timeout_pri_vo; 2533 __le32 rx_timeout_pri_be; 2534 __le32 rx_timeout_pri_bk; 2535 2536 /* 2537 * what mode the rx should decap packets to 2538 * 2539 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2540 * THis setting also determines the default TX behavior, however TX 2541 * behavior can be modified on a per VAP basis during VAP init 2542 */ 2543 __le32 rx_decap_mode; 2544 2545 /* what is the maximum number of scan requests that can be queued */ 2546 __le32 scan_max_pending_reqs; 2547 2548 /* maximum VDEV that could use BMISS offload */ 2549 __le32 bmiss_offload_max_vdev; 2550 2551 /* maximum VDEV that could use offload roaming */ 2552 __le32 roam_offload_max_vdev; 2553 2554 /* maximum AP profiles that would push to offload roaming */ 2555 __le32 roam_offload_max_ap_profiles; 2556 2557 /* 2558 * how many groups to use for mcast->ucast conversion 2559 * 2560 * The target's WAL maintains a table to hold information regarding 2561 * which peers belong to a given multicast group, so that if 2562 * multicast->unicast conversion is enabled, the target can convert 2563 * multicast tx frames to a series of unicast tx frames, to each 2564 * peer within the multicast group. 2565 This num_mcast_groups configuration parameter tells the target how 2566 * many multicast groups to provide storage for within its multicast 2567 * group membership table. 2568 */ 2569 __le32 num_mcast_groups; 2570 2571 /* 2572 * size to alloc for the mcast membership table 2573 * 2574 * This num_mcast_table_elems configuration parameter tells the 2575 * target how many peer elements it needs to provide storage for in 2576 * its multicast group membership table. 2577 * These multicast group membership table elements are shared by the 2578 * multicast groups stored within the table. 2579 */ 2580 __le32 num_mcast_table_elems; 2581 2582 /* 2583 * whether/how to do multicast->unicast conversion 2584 * 2585 * This configuration parameter specifies whether the target should 2586 * perform multicast --> unicast conversion on transmit, and if so, 2587 * what to do if it finds no entries in its multicast group 2588 * membership table for the multicast IP address in the tx frame. 2589 * Configuration value: 2590 * 0 -> Do not perform multicast to unicast conversion. 2591 * 1 -> Convert multicast frames to unicast, if the IP multicast 2592 * address from the tx frame is found in the multicast group 2593 * membership table. If the IP multicast address is not found, 2594 * drop the frame. 2595 * 2 -> Convert multicast frames to unicast, if the IP multicast 2596 * address from the tx frame is found in the multicast group 2597 * membership table. If the IP multicast address is not found, 2598 * transmit the frame as multicast. 2599 */ 2600 __le32 mcast2ucast_mode; 2601 2602 /* 2603 * how much memory to allocate for a tx PPDU dbg log 2604 * 2605 * This parameter controls how much memory the target will allocate 2606 * to store a log of tx PPDU meta-information (how large the PPDU 2607 * was, when it was sent, whether it was successful, etc.) 2608 */ 2609 __le32 tx_dbg_log_size; 2610 2611 /* how many AST entries to be allocated for WDS */ 2612 __le32 num_wds_entries; 2613 2614 /* 2615 * MAC DMA burst size, e.g., For target PCI limit can be 2616 * 0 -default, 1 256B 2617 */ 2618 __le32 dma_burst_size; 2619 2620 /* 2621 * Fixed delimiters to be inserted after every MPDU to 2622 * account for interface latency to avoid underrun. 2623 */ 2624 __le32 mac_aggr_delim; 2625 2626 /* 2627 * determine whether target is responsible for detecting duplicate 2628 * non-aggregate MPDU and timing out stale fragments. 2629 * 2630 * A-MPDU reordering is always performed on the target. 2631 * 2632 * 0: target responsible for frag timeout and dup checking 2633 * 1: host responsible for frag timeout and dup checking 2634 */ 2635 __le32 rx_skip_defrag_timeout_dup_detection_check; 2636 2637 /* 2638 * Configuration for VoW : 2639 * No of Video Nodes to be supported 2640 * and Max no of descriptors for each Video link (node). 2641 */ 2642 __le32 vow_config; 2643 2644 /* Number of msdu descriptors target should use */ 2645 __le32 num_msdu_desc; 2646 2647 /* 2648 * Max. number of Tx fragments per MSDU 2649 * This parameter controls the max number of Tx fragments per MSDU. 2650 * This is sent by the target as part of the WMI_SERVICE_READY event 2651 * and is overridden by the OS shim as required. 2652 */ 2653 __le32 max_frag_entries; 2654 } __packed; 2655 2656 enum wmi_10_2_feature_mask { 2657 WMI_10_2_RX_BATCH_MODE = BIT(0), 2658 WMI_10_2_ATF_CONFIG = BIT(1), 2659 WMI_10_2_COEX_GPIO = BIT(3), 2660 WMI_10_2_BSS_CHAN_INFO = BIT(6), 2661 WMI_10_2_PEER_STATS = BIT(7), 2662 }; 2663 2664 struct wmi_resource_config_10_2 { 2665 struct wmi_resource_config_10x common; 2666 __le32 max_peer_ext_stats; 2667 __le32 smart_ant_cap; /* 0-disable, 1-enable */ 2668 __le32 bk_min_free; 2669 __le32 be_min_free; 2670 __le32 vi_min_free; 2671 __le32 vo_min_free; 2672 __le32 feature_mask; 2673 } __packed; 2674 2675 #define NUM_UNITS_IS_NUM_VDEVS BIT(0) 2676 #define NUM_UNITS_IS_NUM_PEERS BIT(1) 2677 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2) 2678 2679 struct wmi_resource_config_10_4 { 2680 /* Number of virtual devices (VAPs) to support */ 2681 __le32 num_vdevs; 2682 2683 /* Number of peer nodes to support */ 2684 __le32 num_peers; 2685 2686 /* Number of active peer nodes to support */ 2687 __le32 num_active_peers; 2688 2689 /* In offload mode, target supports features like WOW, chatter and other 2690 * protocol offloads. In order to support them some functionalities like 2691 * reorder buffering, PN checking need to be done in target. 2692 * This determines maximum number of peers supported by target in 2693 * offload mode. 2694 */ 2695 __le32 num_offload_peers; 2696 2697 /* Number of reorder buffers available for doing target based reorder 2698 * Rx reorder buffering 2699 */ 2700 __le32 num_offload_reorder_buffs; 2701 2702 /* Number of keys per peer */ 2703 __le32 num_peer_keys; 2704 2705 /* Total number of TX/RX data TIDs */ 2706 __le32 num_tids; 2707 2708 /* Max skid for resolving hash collisions. 2709 * The address search table is sparse, so that if two MAC addresses 2710 * result in the same hash value, the second of these conflicting 2711 * entries can slide to the next index in the address search table, 2712 * and use it, if it is unoccupied. This ast_skid_limit parameter 2713 * specifies the upper bound on how many subsequent indices to search 2714 * over to find an unoccupied space. 2715 */ 2716 __le32 ast_skid_limit; 2717 2718 /* The nominal chain mask for transmit. 2719 * The chain mask may be modified dynamically, e.g. to operate AP tx 2720 * with a reduced number of chains if no clients are associated. 2721 * This configuration parameter specifies the nominal chain-mask that 2722 * should be used when not operating with a reduced set of tx chains. 2723 */ 2724 __le32 tx_chain_mask; 2725 2726 /* The nominal chain mask for receive. 2727 * The chain mask may be modified dynamically, e.g. for a client to use 2728 * a reduced number of chains for receive if the traffic to the client 2729 * is low enough that it doesn't require downlink MIMO or antenna 2730 * diversity. This configuration parameter specifies the nominal 2731 * chain-mask that should be used when not operating with a reduced 2732 * set of rx chains. 2733 */ 2734 __le32 rx_chain_mask; 2735 2736 /* What rx reorder timeout (ms) to use for the AC. 2737 * Each WMM access class (voice, video, best-effort, background) will 2738 * have its own timeout value to dictate how long to wait for missing 2739 * rx MPDUs to arrive before flushing subsequent MPDUs that have already 2740 * been received. This parameter specifies the timeout in milliseconds 2741 * for each class. 2742 */ 2743 __le32 rx_timeout_pri[4]; 2744 2745 /* What mode the rx should decap packets to. 2746 * MAC can decap to RAW (no decap), native wifi or Ethernet types. 2747 * This setting also determines the default TX behavior, however TX 2748 * behavior can be modified on a per VAP basis during VAP init 2749 */ 2750 __le32 rx_decap_mode; 2751 2752 __le32 scan_max_pending_req; 2753 2754 __le32 bmiss_offload_max_vdev; 2755 2756 __le32 roam_offload_max_vdev; 2757 2758 __le32 roam_offload_max_ap_profiles; 2759 2760 /* How many groups to use for mcast->ucast conversion. 2761 * The target's WAL maintains a table to hold information regarding 2762 * which peers belong to a given multicast group, so that if 2763 * multicast->unicast conversion is enabled, the target can convert 2764 * multicast tx frames to a series of unicast tx frames, to each peer 2765 * within the multicast group. This num_mcast_groups configuration 2766 * parameter tells the target how many multicast groups to provide 2767 * storage for within its multicast group membership table. 2768 */ 2769 __le32 num_mcast_groups; 2770 2771 /* Size to alloc for the mcast membership table. 2772 * This num_mcast_table_elems configuration parameter tells the target 2773 * how many peer elements it needs to provide storage for in its 2774 * multicast group membership table. These multicast group membership 2775 * table elements are shared by the multicast groups stored within 2776 * the table. 2777 */ 2778 __le32 num_mcast_table_elems; 2779 2780 /* Whether/how to do multicast->unicast conversion. 2781 * This configuration parameter specifies whether the target should 2782 * perform multicast --> unicast conversion on transmit, and if so, 2783 * what to do if it finds no entries in its multicast group membership 2784 * table for the multicast IP address in the tx frame. 2785 * Configuration value: 2786 * 0 -> Do not perform multicast to unicast conversion. 2787 * 1 -> Convert multicast frames to unicast, if the IP multicast address 2788 * from the tx frame is found in the multicast group membership 2789 * table. If the IP multicast address is not found, drop the frame 2790 * 2 -> Convert multicast frames to unicast, if the IP multicast address 2791 * from the tx frame is found in the multicast group membership 2792 * table. If the IP multicast address is not found, transmit the 2793 * frame as multicast. 2794 */ 2795 __le32 mcast2ucast_mode; 2796 2797 /* How much memory to allocate for a tx PPDU dbg log. 2798 * This parameter controls how much memory the target will allocate to 2799 * store a log of tx PPDU meta-information (how large the PPDU was, 2800 * when it was sent, whether it was successful, etc.) 2801 */ 2802 __le32 tx_dbg_log_size; 2803 2804 /* How many AST entries to be allocated for WDS */ 2805 __le32 num_wds_entries; 2806 2807 /* MAC DMA burst size. 0 -default, 1 -256B */ 2808 __le32 dma_burst_size; 2809 2810 /* Fixed delimiters to be inserted after every MPDU to account for 2811 * interface latency to avoid underrun. 2812 */ 2813 __le32 mac_aggr_delim; 2814 2815 /* Determine whether target is responsible for detecting duplicate 2816 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering 2817 * is always performed on the target. 2818 * 2819 * 0: target responsible for frag timeout and dup checking 2820 * 1: host responsible for frag timeout and dup checking 2821 */ 2822 __le32 rx_skip_defrag_timeout_dup_detection_check; 2823 2824 /* Configuration for VoW : No of Video nodes to be supported and max 2825 * no of descriptors for each video link (node). 2826 */ 2827 __le32 vow_config; 2828 2829 /* Maximum vdev that could use gtk offload */ 2830 __le32 gtk_offload_max_vdev; 2831 2832 /* Number of msdu descriptors target should use */ 2833 __le32 num_msdu_desc; 2834 2835 /* Max number of tx fragments per MSDU. 2836 * This parameter controls the max number of tx fragments per MSDU. 2837 * This will passed by target as part of the WMI_SERVICE_READY event 2838 * and is overridden by the OS shim as required. 2839 */ 2840 __le32 max_frag_entries; 2841 2842 /* Max number of extended peer stats. 2843 * This parameter controls the max number of peers for which extended 2844 * statistics are supported by target 2845 */ 2846 __le32 max_peer_ext_stats; 2847 2848 /* Smart antenna capabilities information. 2849 * 1 - Smart antenna is enabled 2850 * 0 - Smart antenna is disabled 2851 * In future this can contain smart antenna specific capabilities. 2852 */ 2853 __le32 smart_ant_cap; 2854 2855 /* User can configure the buffers allocated for each AC (BE, BK, VI, VO) 2856 * during init. 2857 */ 2858 __le32 bk_minfree; 2859 __le32 be_minfree; 2860 __le32 vi_minfree; 2861 __le32 vo_minfree; 2862 2863 /* Rx batch mode capability. 2864 * 1 - Rx batch mode enabled 2865 * 0 - Rx batch mode disabled 2866 */ 2867 __le32 rx_batchmode; 2868 2869 /* Thermal throttling capability. 2870 * 1 - Capable of thermal throttling 2871 * 0 - Not capable of thermal throttling 2872 */ 2873 __le32 tt_support; 2874 2875 /* ATF configuration. 2876 * 1 - Enable ATF 2877 * 0 - Disable ATF 2878 */ 2879 __le32 atf_config; 2880 2881 /* Configure padding to manage IP header un-alignment 2882 * 1 - Enable padding 2883 * 0 - Disable padding 2884 */ 2885 __le32 iphdr_pad_config; 2886 2887 /* qwrap configuration (bits 15-0) 2888 * 1 - This is qwrap configuration 2889 * 0 - This is not qwrap 2890 * 2891 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables) 2892 * In order to get ack-RSSI reporting and to specify the tx-rate for 2893 * individual frames, this option must be enabled. This uses an extra 2894 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it. 2895 */ 2896 __le32 qwrap_config; 2897 } __packed; 2898 2899 enum wmi_coex_version { 2900 WMI_NO_COEX_VERSION_SUPPORT = 0, 2901 /* 3 wire coex support*/ 2902 WMI_COEX_VERSION_1 = 1, 2903 /* 2.5 wire coex support*/ 2904 WMI_COEX_VERSION_2 = 2, 2905 /* 2.5 wire coex with duty cycle support */ 2906 WMI_COEX_VERSION_3 = 3, 2907 /* 4 wire coex support*/ 2908 WMI_COEX_VERSION_4 = 4, 2909 }; 2910 2911 /** 2912 * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags 2913 * @WMI_10_4_LTEU_SUPPORT: LTEU config 2914 * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config 2915 * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan 2916 * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan 2917 * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats 2918 * @WMI_10_4_PEER_STATS: Per station stats 2919 * @WMI_10_4_VDEV_STATS: Per vdev stats 2920 * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable 2921 * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable 2922 * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable 2923 * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable 2924 * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host 2925 * enable/disable 2926 * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY:Explicit TDLS mode enable/disable 2927 */ 2928 enum wmi_10_4_feature_mask { 2929 WMI_10_4_LTEU_SUPPORT = BIT(0), 2930 WMI_10_4_COEX_GPIO_SUPPORT = BIT(1), 2931 WMI_10_4_AUX_RADIO_SPECTRAL_INTF = BIT(2), 2932 WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF = BIT(3), 2933 WMI_10_4_BSS_CHANNEL_INFO_64 = BIT(4), 2934 WMI_10_4_PEER_STATS = BIT(5), 2935 WMI_10_4_VDEV_STATS = BIT(6), 2936 WMI_10_4_TDLS = BIT(7), 2937 WMI_10_4_TDLS_OFFCHAN = BIT(8), 2938 WMI_10_4_TDLS_UAPSD_BUFFER_STA = BIT(9), 2939 WMI_10_4_TDLS_UAPSD_SLEEP_STA = BIT(10), 2940 WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11), 2941 WMI_10_4_TDLS_EXPLICIT_MODE_ONLY = BIT(12), 2942 2943 }; 2944 2945 struct wmi_ext_resource_config_10_4_cmd { 2946 /* contains enum wmi_host_platform_type */ 2947 __le32 host_platform_config; 2948 /* see enum wmi_10_4_feature_mask */ 2949 __le32 fw_feature_bitmap; 2950 /* WLAN priority GPIO number */ 2951 __le32 wlan_gpio_priority; 2952 /* see enum wmi_coex_version */ 2953 __le32 coex_version; 2954 /* COEX GPIO config */ 2955 __le32 coex_gpio_pin1; 2956 __le32 coex_gpio_pin2; 2957 __le32 coex_gpio_pin3; 2958 /* number of vdevs allowed to perform tdls */ 2959 __le32 num_tdls_vdevs; 2960 /* number of peers to track per TDLS vdev */ 2961 __le32 num_tdls_conn_table_entries; 2962 /* number of tdls sleep sta supported */ 2963 __le32 max_tdls_concurrent_sleep_sta; 2964 /* number of tdls buffer sta supported */ 2965 __le32 max_tdls_concurrent_buffer_sta; 2966 }; 2967 2968 /* structure describing host memory chunk. */ 2969 struct host_memory_chunk { 2970 /* id of the request that is passed up in service ready */ 2971 __le32 req_id; 2972 /* the physical address the memory chunk */ 2973 __le32 ptr; 2974 /* size of the chunk */ 2975 __le32 size; 2976 } __packed; 2977 2978 struct wmi_host_mem_chunks { 2979 __le32 count; 2980 /* some fw revisions require at least 1 chunk regardless of count */ 2981 struct host_memory_chunk items[1]; 2982 } __packed; 2983 2984 struct wmi_init_cmd { 2985 struct wmi_resource_config resource_config; 2986 struct wmi_host_mem_chunks mem_chunks; 2987 } __packed; 2988 2989 /* _10x structure is from 10.X FW API */ 2990 struct wmi_init_cmd_10x { 2991 struct wmi_resource_config_10x resource_config; 2992 struct wmi_host_mem_chunks mem_chunks; 2993 } __packed; 2994 2995 struct wmi_init_cmd_10_2 { 2996 struct wmi_resource_config_10_2 resource_config; 2997 struct wmi_host_mem_chunks mem_chunks; 2998 } __packed; 2999 3000 struct wmi_init_cmd_10_4 { 3001 struct wmi_resource_config_10_4 resource_config; 3002 struct wmi_host_mem_chunks mem_chunks; 3003 } __packed; 3004 3005 struct wmi_chan_list_entry { 3006 __le16 freq; 3007 u8 phy_mode; /* valid for 10.2 only */ 3008 u8 reserved; 3009 } __packed; 3010 3011 /* TLV for channel list */ 3012 struct wmi_chan_list { 3013 __le32 tag; /* WMI_CHAN_LIST_TAG */ 3014 __le32 num_chan; 3015 struct wmi_chan_list_entry channel_list[0]; 3016 } __packed; 3017 3018 struct wmi_bssid_list { 3019 __le32 tag; /* WMI_BSSID_LIST_TAG */ 3020 __le32 num_bssid; 3021 struct wmi_mac_addr bssid_list[0]; 3022 } __packed; 3023 3024 struct wmi_ie_data { 3025 __le32 tag; /* WMI_IE_TAG */ 3026 __le32 ie_len; 3027 u8 ie_data[0]; 3028 } __packed; 3029 3030 struct wmi_ssid { 3031 __le32 ssid_len; 3032 u8 ssid[32]; 3033 } __packed; 3034 3035 struct wmi_ssid_list { 3036 __le32 tag; /* WMI_SSID_LIST_TAG */ 3037 __le32 num_ssids; 3038 struct wmi_ssid ssids[0]; 3039 } __packed; 3040 3041 /* prefix used by scan requestor ids on the host */ 3042 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000 3043 3044 /* prefix used by scan request ids generated on the host */ 3045 /* host cycles through the lower 12 bits to generate ids */ 3046 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000 3047 3048 #define WLAN_SCAN_PARAMS_MAX_SSID 16 3049 #define WLAN_SCAN_PARAMS_MAX_BSSID 4 3050 #define WLAN_SCAN_PARAMS_MAX_IE_LEN 256 3051 3052 /* Values lower than this may be refused by some firmware revisions with a scan 3053 * completion with a timedout reason. 3054 */ 3055 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40 3056 3057 /* Scan priority numbers must be sequential, starting with 0 */ 3058 enum wmi_scan_priority { 3059 WMI_SCAN_PRIORITY_VERY_LOW = 0, 3060 WMI_SCAN_PRIORITY_LOW, 3061 WMI_SCAN_PRIORITY_MEDIUM, 3062 WMI_SCAN_PRIORITY_HIGH, 3063 WMI_SCAN_PRIORITY_VERY_HIGH, 3064 WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */ 3065 }; 3066 3067 struct wmi_start_scan_common { 3068 /* Scan ID */ 3069 __le32 scan_id; 3070 /* Scan requestor ID */ 3071 __le32 scan_req_id; 3072 /* VDEV id(interface) that is requesting scan */ 3073 __le32 vdev_id; 3074 /* Scan Priority, input to scan scheduler */ 3075 __le32 scan_priority; 3076 /* Scan events subscription */ 3077 __le32 notify_scan_events; 3078 /* dwell time in msec on active channels */ 3079 __le32 dwell_time_active; 3080 /* dwell time in msec on passive channels */ 3081 __le32 dwell_time_passive; 3082 /* 3083 * min time in msec on the BSS channel,only valid if atleast one 3084 * VDEV is active 3085 */ 3086 __le32 min_rest_time; 3087 /* 3088 * max rest time in msec on the BSS channel,only valid if at least 3089 * one VDEV is active 3090 */ 3091 /* 3092 * the scanner will rest on the bss channel at least min_rest_time 3093 * after min_rest_time the scanner will start checking for tx/rx 3094 * activity on all VDEVs. if there is no activity the scanner will 3095 * switch to off channel. if there is activity the scanner will let 3096 * the radio on the bss channel until max_rest_time expires.at 3097 * max_rest_time scanner will switch to off channel irrespective of 3098 * activity. activity is determined by the idle_time parameter. 3099 */ 3100 __le32 max_rest_time; 3101 /* 3102 * time before sending next set of probe requests. 3103 * The scanner keeps repeating probe requests transmission with 3104 * period specified by repeat_probe_time. 3105 * The number of probe requests specified depends on the ssid_list 3106 * and bssid_list 3107 */ 3108 __le32 repeat_probe_time; 3109 /* time in msec between 2 consequetive probe requests with in a set. */ 3110 __le32 probe_spacing_time; 3111 /* 3112 * data inactivity time in msec on bss channel that will be used by 3113 * scanner for measuring the inactivity. 3114 */ 3115 __le32 idle_time; 3116 /* maximum time in msec allowed for scan */ 3117 __le32 max_scan_time; 3118 /* 3119 * delay in msec before sending first probe request after switching 3120 * to a channel 3121 */ 3122 __le32 probe_delay; 3123 /* Scan control flags */ 3124 __le32 scan_ctrl_flags; 3125 } __packed; 3126 3127 struct wmi_start_scan_tlvs { 3128 /* TLV parameters. These includes channel list, ssid list, bssid list, 3129 * extra ies. 3130 */ 3131 u8 tlvs[0]; 3132 } __packed; 3133 3134 struct wmi_start_scan_cmd { 3135 struct wmi_start_scan_common common; 3136 __le32 burst_duration_ms; 3137 struct wmi_start_scan_tlvs tlvs; 3138 } __packed; 3139 3140 /* This is the definition from 10.X firmware branch */ 3141 struct wmi_10x_start_scan_cmd { 3142 struct wmi_start_scan_common common; 3143 struct wmi_start_scan_tlvs tlvs; 3144 } __packed; 3145 3146 struct wmi_ssid_arg { 3147 int len; 3148 const u8 *ssid; 3149 }; 3150 3151 struct wmi_bssid_arg { 3152 const u8 *bssid; 3153 }; 3154 3155 struct wmi_start_scan_arg { 3156 u32 scan_id; 3157 u32 scan_req_id; 3158 u32 vdev_id; 3159 u32 scan_priority; 3160 u32 notify_scan_events; 3161 u32 dwell_time_active; 3162 u32 dwell_time_passive; 3163 u32 min_rest_time; 3164 u32 max_rest_time; 3165 u32 repeat_probe_time; 3166 u32 probe_spacing_time; 3167 u32 idle_time; 3168 u32 max_scan_time; 3169 u32 probe_delay; 3170 u32 scan_ctrl_flags; 3171 u32 burst_duration_ms; 3172 3173 u32 ie_len; 3174 u32 n_channels; 3175 u32 n_ssids; 3176 u32 n_bssids; 3177 3178 u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN]; 3179 u16 channels[64]; 3180 struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID]; 3181 struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID]; 3182 struct wmi_mac_addr mac_addr; 3183 struct wmi_mac_addr mac_mask; 3184 }; 3185 3186 /* scan control flags */ 3187 3188 /* passively scan all channels including active channels */ 3189 #define WMI_SCAN_FLAG_PASSIVE 0x1 3190 /* add wild card ssid probe request even though ssid_list is specified. */ 3191 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2 3192 /* add cck rates to rates/xrate ie for the generated probe request */ 3193 #define WMI_SCAN_ADD_CCK_RATES 0x4 3194 /* add ofdm rates to rates/xrate ie for the generated probe request */ 3195 #define WMI_SCAN_ADD_OFDM_RATES 0x8 3196 /* To enable indication of Chan load and Noise floor to host */ 3197 #define WMI_SCAN_CHAN_STAT_EVENT 0x10 3198 /* Filter Probe request frames */ 3199 #define WMI_SCAN_FILTER_PROBE_REQ 0x20 3200 /* When set, DFS channels will not be scanned */ 3201 #define WMI_SCAN_BYPASS_DFS_CHN 0x40 3202 /* Different FW scan engine may choose to bail out on errors. 3203 * Allow the driver to have influence over that. 3204 */ 3205 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80 3206 3207 /* Use random MAC address for TA for Probe Request frame and add 3208 * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame. 3209 * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored. 3210 */ 3211 #define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ 0x1000 3212 3213 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */ 3214 #define WMI_SCAN_CLASS_MASK 0xFF000000 3215 3216 enum wmi_stop_scan_type { 3217 WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */ 3218 WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */ 3219 WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */ 3220 }; 3221 3222 struct wmi_stop_scan_cmd { 3223 __le32 scan_req_id; 3224 __le32 scan_id; 3225 __le32 req_type; 3226 __le32 vdev_id; 3227 } __packed; 3228 3229 struct wmi_stop_scan_arg { 3230 u32 req_id; 3231 enum wmi_stop_scan_type req_type; 3232 union { 3233 u32 scan_id; 3234 u32 vdev_id; 3235 } u; 3236 }; 3237 3238 struct wmi_scan_chan_list_cmd { 3239 __le32 num_scan_chans; 3240 struct wmi_channel chan_info[0]; 3241 } __packed; 3242 3243 struct wmi_scan_chan_list_arg { 3244 u32 n_channels; 3245 struct wmi_channel_arg *channels; 3246 }; 3247 3248 enum wmi_bss_filter { 3249 WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */ 3250 WMI_BSS_FILTER_ALL, /* all beacons forwarded */ 3251 WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */ 3252 WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */ 3253 WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */ 3254 WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */ 3255 WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */ 3256 WMI_BSS_FILTER_LAST_BSS, /* marker only */ 3257 }; 3258 3259 enum wmi_scan_event_type { 3260 WMI_SCAN_EVENT_STARTED = BIT(0), 3261 WMI_SCAN_EVENT_COMPLETED = BIT(1), 3262 WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2), 3263 WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3), 3264 WMI_SCAN_EVENT_DEQUEUED = BIT(4), 3265 /* possibly by high-prio scan */ 3266 WMI_SCAN_EVENT_PREEMPTED = BIT(5), 3267 WMI_SCAN_EVENT_START_FAILED = BIT(6), 3268 WMI_SCAN_EVENT_RESTARTED = BIT(7), 3269 WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8), 3270 WMI_SCAN_EVENT_MAX = BIT(15), 3271 }; 3272 3273 enum wmi_scan_completion_reason { 3274 WMI_SCAN_REASON_COMPLETED, 3275 WMI_SCAN_REASON_CANCELLED, 3276 WMI_SCAN_REASON_PREEMPTED, 3277 WMI_SCAN_REASON_TIMEDOUT, 3278 WMI_SCAN_REASON_INTERNAL_FAILURE, 3279 WMI_SCAN_REASON_MAX, 3280 }; 3281 3282 struct wmi_scan_event { 3283 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 3284 __le32 reason; /* %WMI_SCAN_REASON_ */ 3285 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 3286 __le32 scan_req_id; 3287 __le32 scan_id; 3288 __le32 vdev_id; 3289 } __packed; 3290 3291 /* 3292 * This defines how much headroom is kept in the 3293 * receive frame between the descriptor and the 3294 * payload, in order for the WMI PHY error and 3295 * management handler to insert header contents. 3296 * 3297 * This is in bytes. 3298 */ 3299 #define WMI_MGMT_RX_HDR_HEADROOM 52 3300 3301 /* 3302 * This event will be used for sending scan results 3303 * as well as rx mgmt frames to the host. The rx buffer 3304 * will be sent as part of this WMI event. It would be a 3305 * good idea to pass all the fields in the RX status 3306 * descriptor up to the host. 3307 */ 3308 struct wmi_mgmt_rx_hdr_v1 { 3309 __le32 channel; 3310 __le32 snr; 3311 __le32 rate; 3312 __le32 phy_mode; 3313 __le32 buf_len; 3314 __le32 status; /* %WMI_RX_STATUS_ */ 3315 } __packed; 3316 3317 struct wmi_mgmt_rx_hdr_v2 { 3318 struct wmi_mgmt_rx_hdr_v1 v1; 3319 __le32 rssi_ctl[4]; 3320 } __packed; 3321 3322 struct wmi_mgmt_rx_event_v1 { 3323 struct wmi_mgmt_rx_hdr_v1 hdr; 3324 u8 buf[0]; 3325 } __packed; 3326 3327 struct wmi_mgmt_rx_event_v2 { 3328 struct wmi_mgmt_rx_hdr_v2 hdr; 3329 u8 buf[0]; 3330 } __packed; 3331 3332 struct wmi_10_4_mgmt_rx_hdr { 3333 __le32 channel; 3334 __le32 snr; 3335 u8 rssi_ctl[4]; 3336 __le32 rate; 3337 __le32 phy_mode; 3338 __le32 buf_len; 3339 __le32 status; 3340 } __packed; 3341 3342 struct wmi_10_4_mgmt_rx_event { 3343 struct wmi_10_4_mgmt_rx_hdr hdr; 3344 u8 buf[0]; 3345 } __packed; 3346 3347 struct wmi_mgmt_rx_ext_info { 3348 __le64 rx_mac_timestamp; 3349 } __packed __aligned(4); 3350 3351 #define WMI_RX_STATUS_OK 0x00 3352 #define WMI_RX_STATUS_ERR_CRC 0x01 3353 #define WMI_RX_STATUS_ERR_DECRYPT 0x08 3354 #define WMI_RX_STATUS_ERR_MIC 0x10 3355 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20 3356 /* Extension data at the end of mgmt frame */ 3357 #define WMI_RX_STATUS_EXT_INFO 0x40 3358 3359 #define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26 3360 #define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24 3361 #define PHY_ERROR_GEN_RADAR 0x05 3362 3363 #define PHY_ERROR_10_4_RADAR_MASK 0x4 3364 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000 3365 3366 enum phy_err_type { 3367 PHY_ERROR_UNKNOWN, 3368 PHY_ERROR_SPECTRAL_SCAN, 3369 PHY_ERROR_FALSE_RADAR_EXT, 3370 PHY_ERROR_RADAR 3371 }; 3372 3373 struct wmi_phyerr { 3374 __le32 tsf_timestamp; 3375 __le16 freq1; 3376 __le16 freq2; 3377 u8 rssi_combined; 3378 u8 chan_width_mhz; 3379 u8 phy_err_code; 3380 u8 rsvd0; 3381 __le32 rssi_chains[4]; 3382 __le16 nf_chains[4]; 3383 __le32 buf_len; 3384 u8 buf[0]; 3385 } __packed; 3386 3387 struct wmi_phyerr_event { 3388 __le32 num_phyerrs; 3389 __le32 tsf_l32; 3390 __le32 tsf_u32; 3391 struct wmi_phyerr phyerrs[0]; 3392 } __packed; 3393 3394 struct wmi_10_4_phyerr_event { 3395 __le32 tsf_l32; 3396 __le32 tsf_u32; 3397 __le16 freq1; 3398 __le16 freq2; 3399 u8 rssi_combined; 3400 u8 chan_width_mhz; 3401 u8 phy_err_code; 3402 u8 rsvd0; 3403 __le32 rssi_chains[4]; 3404 __le16 nf_chains[4]; 3405 __le32 phy_err_mask[2]; 3406 __le32 tsf_timestamp; 3407 __le32 buf_len; 3408 u8 buf[0]; 3409 } __packed; 3410 3411 struct wmi_radar_found_info { 3412 __le32 pri_min; 3413 __le32 pri_max; 3414 __le32 width_min; 3415 __le32 width_max; 3416 __le32 sidx_min; 3417 __le32 sidx_max; 3418 } __packed; 3419 3420 enum wmi_radar_confirmation_status { 3421 /* Detected radar was due to SW pulses */ 3422 WMI_SW_RADAR_DETECTED = 0, 3423 3424 WMI_RADAR_DETECTION_FAIL = 1, 3425 3426 /* Real radar detected */ 3427 WMI_HW_RADAR_DETECTED = 2, 3428 }; 3429 3430 #define PHYERR_TLV_SIG 0xBB 3431 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB 3432 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8 3433 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9 3434 3435 struct phyerr_radar_report { 3436 __le32 reg0; /* RADAR_REPORT_REG0_* */ 3437 __le32 reg1; /* RADAR_REPORT_REG1_* */ 3438 } __packed; 3439 3440 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000 3441 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31 3442 3443 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000 3444 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30 3445 3446 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000 3447 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20 3448 3449 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000 3450 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16 3451 3452 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00 3453 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10 3454 3455 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF 3456 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0 3457 3458 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000 3459 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31 3460 3461 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000 3462 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24 3463 3464 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000 3465 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16 3466 3467 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00 3468 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8 3469 3470 #define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF 3471 #define RADAR_REPORT_REG1_PULSE_DUR_LSB 0 3472 3473 struct phyerr_fft_report { 3474 __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */ 3475 __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */ 3476 } __packed; 3477 3478 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000 3479 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23 3480 3481 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000 3482 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14 3483 3484 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000 3485 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12 3486 3487 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF 3488 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0 3489 3490 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000 3491 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26 3492 3493 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000 3494 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18 3495 3496 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00 3497 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8 3498 3499 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF 3500 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0 3501 3502 struct phyerr_tlv { 3503 __le16 len; 3504 u8 tag; 3505 u8 sig; 3506 } __packed; 3507 3508 #define DFS_RSSI_POSSIBLY_FALSE 50 3509 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40 3510 3511 struct wmi_mgmt_tx_hdr { 3512 __le32 vdev_id; 3513 struct wmi_mac_addr peer_macaddr; 3514 __le32 tx_rate; 3515 __le32 tx_power; 3516 __le32 buf_len; 3517 } __packed; 3518 3519 struct wmi_mgmt_tx_cmd { 3520 struct wmi_mgmt_tx_hdr hdr; 3521 u8 buf[0]; 3522 } __packed; 3523 3524 struct wmi_echo_event { 3525 __le32 value; 3526 } __packed; 3527 3528 struct wmi_echo_cmd { 3529 __le32 value; 3530 } __packed; 3531 3532 struct wmi_pdev_set_regdomain_cmd { 3533 __le32 reg_domain; 3534 __le32 reg_domain_2G; 3535 __le32 reg_domain_5G; 3536 __le32 conformance_test_limit_2G; 3537 __le32 conformance_test_limit_5G; 3538 } __packed; 3539 3540 enum wmi_dfs_region { 3541 /* Uninitialized dfs domain */ 3542 WMI_UNINIT_DFS_DOMAIN = 0, 3543 3544 /* FCC3 dfs domain */ 3545 WMI_FCC_DFS_DOMAIN = 1, 3546 3547 /* ETSI dfs domain */ 3548 WMI_ETSI_DFS_DOMAIN = 2, 3549 3550 /*Japan dfs domain */ 3551 WMI_MKK4_DFS_DOMAIN = 3, 3552 }; 3553 3554 struct wmi_pdev_set_regdomain_cmd_10x { 3555 __le32 reg_domain; 3556 __le32 reg_domain_2G; 3557 __le32 reg_domain_5G; 3558 __le32 conformance_test_limit_2G; 3559 __le32 conformance_test_limit_5G; 3560 3561 /* dfs domain from wmi_dfs_region */ 3562 __le32 dfs_domain; 3563 } __packed; 3564 3565 /* Command to set/unset chip in quiet mode */ 3566 struct wmi_pdev_set_quiet_cmd { 3567 /* period in TUs */ 3568 __le32 period; 3569 3570 /* duration in TUs */ 3571 __le32 duration; 3572 3573 /* offset in TUs */ 3574 __le32 next_start; 3575 3576 /* enable/disable */ 3577 __le32 enabled; 3578 } __packed; 3579 3580 /* 3581 * 802.11g protection mode. 3582 */ 3583 enum ath10k_protmode { 3584 ATH10K_PROT_NONE = 0, /* no protection */ 3585 ATH10K_PROT_CTSONLY = 1, /* CTS to self */ 3586 ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */ 3587 }; 3588 3589 enum wmi_rtscts_profile { 3590 WMI_RTSCTS_FOR_NO_RATESERIES = 0, 3591 WMI_RTSCTS_FOR_SECOND_RATESERIES, 3592 WMI_RTSCTS_ACROSS_SW_RETRIES 3593 }; 3594 3595 #define WMI_RTSCTS_ENABLED 1 3596 #define WMI_RTSCTS_SET_MASK 0x0f 3597 #define WMI_RTSCTS_SET_LSB 0 3598 3599 #define WMI_RTSCTS_PROFILE_MASK 0xf0 3600 #define WMI_RTSCTS_PROFILE_LSB 4 3601 3602 enum wmi_beacon_gen_mode { 3603 WMI_BEACON_STAGGERED_MODE = 0, 3604 WMI_BEACON_BURST_MODE = 1 3605 }; 3606 3607 enum wmi_csa_event_ies_present_flag { 3608 WMI_CSA_IE_PRESENT = 0x00000001, 3609 WMI_XCSA_IE_PRESENT = 0x00000002, 3610 WMI_WBW_IE_PRESENT = 0x00000004, 3611 WMI_CSWARP_IE_PRESENT = 0x00000008, 3612 }; 3613 3614 /* wmi CSA receive event from beacon frame */ 3615 struct wmi_csa_event { 3616 __le32 i_fc_dur; 3617 /* Bit 0-15: FC */ 3618 /* Bit 16-31: DUR */ 3619 struct wmi_mac_addr i_addr1; 3620 struct wmi_mac_addr i_addr2; 3621 __le32 csa_ie[2]; 3622 __le32 xcsa_ie[2]; 3623 __le32 wb_ie[2]; 3624 __le32 cswarp_ie; 3625 __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */ 3626 } __packed; 3627 3628 /* the definition of different PDEV parameters */ 3629 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3630 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3631 #define PEER_DEFAULT_STATS_UPDATE_PERIOD 500 3632 3633 struct wmi_pdev_param_map { 3634 u32 tx_chain_mask; 3635 u32 rx_chain_mask; 3636 u32 txpower_limit2g; 3637 u32 txpower_limit5g; 3638 u32 txpower_scale; 3639 u32 beacon_gen_mode; 3640 u32 beacon_tx_mode; 3641 u32 resmgr_offchan_mode; 3642 u32 protection_mode; 3643 u32 dynamic_bw; 3644 u32 non_agg_sw_retry_th; 3645 u32 agg_sw_retry_th; 3646 u32 sta_kickout_th; 3647 u32 ac_aggrsize_scaling; 3648 u32 ltr_enable; 3649 u32 ltr_ac_latency_be; 3650 u32 ltr_ac_latency_bk; 3651 u32 ltr_ac_latency_vi; 3652 u32 ltr_ac_latency_vo; 3653 u32 ltr_ac_latency_timeout; 3654 u32 ltr_sleep_override; 3655 u32 ltr_rx_override; 3656 u32 ltr_tx_activity_timeout; 3657 u32 l1ss_enable; 3658 u32 dsleep_enable; 3659 u32 pcielp_txbuf_flush; 3660 u32 pcielp_txbuf_watermark; 3661 u32 pcielp_txbuf_tmo_en; 3662 u32 pcielp_txbuf_tmo_value; 3663 u32 pdev_stats_update_period; 3664 u32 vdev_stats_update_period; 3665 u32 peer_stats_update_period; 3666 u32 bcnflt_stats_update_period; 3667 u32 pmf_qos; 3668 u32 arp_ac_override; 3669 u32 dcs; 3670 u32 ani_enable; 3671 u32 ani_poll_period; 3672 u32 ani_listen_period; 3673 u32 ani_ofdm_level; 3674 u32 ani_cck_level; 3675 u32 dyntxchain; 3676 u32 proxy_sta; 3677 u32 idle_ps_config; 3678 u32 power_gating_sleep; 3679 u32 fast_channel_reset; 3680 u32 burst_dur; 3681 u32 burst_enable; 3682 u32 cal_period; 3683 u32 aggr_burst; 3684 u32 rx_decap_mode; 3685 u32 smart_antenna_default_antenna; 3686 u32 igmpmld_override; 3687 u32 igmpmld_tid; 3688 u32 antenna_gain; 3689 u32 rx_filter; 3690 u32 set_mcast_to_ucast_tid; 3691 u32 proxy_sta_mode; 3692 u32 set_mcast2ucast_mode; 3693 u32 set_mcast2ucast_buffer; 3694 u32 remove_mcast2ucast_buffer; 3695 u32 peer_sta_ps_statechg_enable; 3696 u32 igmpmld_ac_override; 3697 u32 block_interbss; 3698 u32 set_disable_reset_cmdid; 3699 u32 set_msdu_ttl_cmdid; 3700 u32 set_ppdu_duration_cmdid; 3701 u32 txbf_sound_period_cmdid; 3702 u32 set_promisc_mode_cmdid; 3703 u32 set_burst_mode_cmdid; 3704 u32 en_stats; 3705 u32 mu_group_policy; 3706 u32 noise_detection; 3707 u32 noise_threshold; 3708 u32 dpd_enable; 3709 u32 set_mcast_bcast_echo; 3710 u32 atf_strict_sch; 3711 u32 atf_sched_duration; 3712 u32 ant_plzn; 3713 u32 mgmt_retry_limit; 3714 u32 sensitivity_level; 3715 u32 signed_txpower_2g; 3716 u32 signed_txpower_5g; 3717 u32 enable_per_tid_amsdu; 3718 u32 enable_per_tid_ampdu; 3719 u32 cca_threshold; 3720 u32 rts_fixed_rate; 3721 u32 pdev_reset; 3722 u32 wapi_mbssid_offset; 3723 u32 arp_srcaddr; 3724 u32 arp_dstaddr; 3725 u32 enable_btcoex; 3726 }; 3727 3728 #define WMI_PDEV_PARAM_UNSUPPORTED 0 3729 3730 enum wmi_pdev_param { 3731 /* TX chain mask */ 3732 WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3733 /* RX chain mask */ 3734 WMI_PDEV_PARAM_RX_CHAIN_MASK, 3735 /* TX power limit for 2G Radio */ 3736 WMI_PDEV_PARAM_TXPOWER_LIMIT2G, 3737 /* TX power limit for 5G Radio */ 3738 WMI_PDEV_PARAM_TXPOWER_LIMIT5G, 3739 /* TX power scale */ 3740 WMI_PDEV_PARAM_TXPOWER_SCALE, 3741 /* Beacon generation mode . 0: host, 1: target */ 3742 WMI_PDEV_PARAM_BEACON_GEN_MODE, 3743 /* Beacon generation mode . 0: staggered 1: bursted */ 3744 WMI_PDEV_PARAM_BEACON_TX_MODE, 3745 /* 3746 * Resource manager off chan mode . 3747 * 0: turn off off chan mode. 1: turn on offchan mode 3748 */ 3749 WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3750 /* 3751 * Protection mode: 3752 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3753 */ 3754 WMI_PDEV_PARAM_PROTECTION_MODE, 3755 /* 3756 * Dynamic bandwidth - 0: disable, 1: enable 3757 * 3758 * When enabled HW rate control tries different bandwidths when 3759 * retransmitting frames. 3760 */ 3761 WMI_PDEV_PARAM_DYNAMIC_BW, 3762 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3763 WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3764 /* aggregrate sw retry threshold. 0-disable*/ 3765 WMI_PDEV_PARAM_AGG_SW_RETRY_TH, 3766 /* Station kickout threshold (non of consecutive failures).0-disable */ 3767 WMI_PDEV_PARAM_STA_KICKOUT_TH, 3768 /* Aggerate size scaling configuration per AC */ 3769 WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3770 /* LTR enable */ 3771 WMI_PDEV_PARAM_LTR_ENABLE, 3772 /* LTR latency for BE, in us */ 3773 WMI_PDEV_PARAM_LTR_AC_LATENCY_BE, 3774 /* LTR latency for BK, in us */ 3775 WMI_PDEV_PARAM_LTR_AC_LATENCY_BK, 3776 /* LTR latency for VI, in us */ 3777 WMI_PDEV_PARAM_LTR_AC_LATENCY_VI, 3778 /* LTR latency for VO, in us */ 3779 WMI_PDEV_PARAM_LTR_AC_LATENCY_VO, 3780 /* LTR AC latency timeout, in ms */ 3781 WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3782 /* LTR platform latency override, in us */ 3783 WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3784 /* LTR-RX override, in us */ 3785 WMI_PDEV_PARAM_LTR_RX_OVERRIDE, 3786 /* Tx activity timeout for LTR, in us */ 3787 WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3788 /* L1SS state machine enable */ 3789 WMI_PDEV_PARAM_L1SS_ENABLE, 3790 /* Deep sleep state machine enable */ 3791 WMI_PDEV_PARAM_DSLEEP_ENABLE, 3792 /* RX buffering flush enable */ 3793 WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3794 /* RX buffering matermark */ 3795 WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3796 /* RX buffering timeout enable */ 3797 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3798 /* RX buffering timeout value */ 3799 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3800 /* pdev level stats update period in ms */ 3801 WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3802 /* vdev level stats update period in ms */ 3803 WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3804 /* peer level stats update period in ms */ 3805 WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3806 /* beacon filter status update period */ 3807 WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3808 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3809 WMI_PDEV_PARAM_PMF_QOS, 3810 /* Access category on which ARP frames are sent */ 3811 WMI_PDEV_PARAM_ARP_AC_OVERRIDE, 3812 /* DCS configuration */ 3813 WMI_PDEV_PARAM_DCS, 3814 /* Enable/Disable ANI on target */ 3815 WMI_PDEV_PARAM_ANI_ENABLE, 3816 /* configure the ANI polling period */ 3817 WMI_PDEV_PARAM_ANI_POLL_PERIOD, 3818 /* configure the ANI listening period */ 3819 WMI_PDEV_PARAM_ANI_LISTEN_PERIOD, 3820 /* configure OFDM immunity level */ 3821 WMI_PDEV_PARAM_ANI_OFDM_LEVEL, 3822 /* configure CCK immunity level */ 3823 WMI_PDEV_PARAM_ANI_CCK_LEVEL, 3824 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3825 WMI_PDEV_PARAM_DYNTXCHAIN, 3826 /* Enable/Disable proxy STA */ 3827 WMI_PDEV_PARAM_PROXY_STA, 3828 /* Enable/Disable low power state when all VDEVs are inactive/idle. */ 3829 WMI_PDEV_PARAM_IDLE_PS_CONFIG, 3830 /* Enable/Disable power gating sleep */ 3831 WMI_PDEV_PARAM_POWER_GATING_SLEEP, 3832 }; 3833 3834 enum wmi_10x_pdev_param { 3835 /* TX chian mask */ 3836 WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3837 /* RX chian mask */ 3838 WMI_10X_PDEV_PARAM_RX_CHAIN_MASK, 3839 /* TX power limit for 2G Radio */ 3840 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G, 3841 /* TX power limit for 5G Radio */ 3842 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G, 3843 /* TX power scale */ 3844 WMI_10X_PDEV_PARAM_TXPOWER_SCALE, 3845 /* Beacon generation mode . 0: host, 1: target */ 3846 WMI_10X_PDEV_PARAM_BEACON_GEN_MODE, 3847 /* Beacon generation mode . 0: staggered 1: bursted */ 3848 WMI_10X_PDEV_PARAM_BEACON_TX_MODE, 3849 /* 3850 * Resource manager off chan mode . 3851 * 0: turn off off chan mode. 1: turn on offchan mode 3852 */ 3853 WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3854 /* 3855 * Protection mode: 3856 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3857 */ 3858 WMI_10X_PDEV_PARAM_PROTECTION_MODE, 3859 /* Dynamic bandwidth 0: disable 1: enable */ 3860 WMI_10X_PDEV_PARAM_DYNAMIC_BW, 3861 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3862 WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3863 /* aggregrate sw retry threshold. 0-disable*/ 3864 WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH, 3865 /* Station kickout threshold (non of consecutive failures).0-disable */ 3866 WMI_10X_PDEV_PARAM_STA_KICKOUT_TH, 3867 /* Aggerate size scaling configuration per AC */ 3868 WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3869 /* LTR enable */ 3870 WMI_10X_PDEV_PARAM_LTR_ENABLE, 3871 /* LTR latency for BE, in us */ 3872 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE, 3873 /* LTR latency for BK, in us */ 3874 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK, 3875 /* LTR latency for VI, in us */ 3876 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI, 3877 /* LTR latency for VO, in us */ 3878 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO, 3879 /* LTR AC latency timeout, in ms */ 3880 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3881 /* LTR platform latency override, in us */ 3882 WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3883 /* LTR-RX override, in us */ 3884 WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE, 3885 /* Tx activity timeout for LTR, in us */ 3886 WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3887 /* L1SS state machine enable */ 3888 WMI_10X_PDEV_PARAM_L1SS_ENABLE, 3889 /* Deep sleep state machine enable */ 3890 WMI_10X_PDEV_PARAM_DSLEEP_ENABLE, 3891 /* pdev level stats update period in ms */ 3892 WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3893 /* vdev level stats update period in ms */ 3894 WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3895 /* peer level stats update period in ms */ 3896 WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3897 /* beacon filter status update period */ 3898 WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3899 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3900 WMI_10X_PDEV_PARAM_PMF_QOS, 3901 /* Access category on which ARP and DHCP frames are sent */ 3902 WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE, 3903 /* DCS configuration */ 3904 WMI_10X_PDEV_PARAM_DCS, 3905 /* Enable/Disable ANI on target */ 3906 WMI_10X_PDEV_PARAM_ANI_ENABLE, 3907 /* configure the ANI polling period */ 3908 WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD, 3909 /* configure the ANI listening period */ 3910 WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD, 3911 /* configure OFDM immunity level */ 3912 WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL, 3913 /* configure CCK immunity level */ 3914 WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL, 3915 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3916 WMI_10X_PDEV_PARAM_DYNTXCHAIN, 3917 /* Enable/Disable Fast channel reset*/ 3918 WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET, 3919 /* Set Bursting DUR */ 3920 WMI_10X_PDEV_PARAM_BURST_DUR, 3921 /* Set Bursting Enable*/ 3922 WMI_10X_PDEV_PARAM_BURST_ENABLE, 3923 3924 /* following are available as of firmware 10.2 */ 3925 WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 3926 WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE, 3927 WMI_10X_PDEV_PARAM_IGMPMLD_TID, 3928 WMI_10X_PDEV_PARAM_ANTENNA_GAIN, 3929 WMI_10X_PDEV_PARAM_RX_DECAP_MODE, 3930 WMI_10X_PDEV_PARAM_RX_FILTER, 3931 WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID, 3932 WMI_10X_PDEV_PARAM_PROXY_STA_MODE, 3933 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE, 3934 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 3935 WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 3936 WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE, 3937 WMI_10X_PDEV_PARAM_RTS_FIXED_RATE, 3938 WMI_10X_PDEV_PARAM_CAL_PERIOD, 3939 WMI_10X_PDEV_PARAM_ATF_STRICT_SCH, 3940 WMI_10X_PDEV_PARAM_ATF_SCHED_DURATION, 3941 WMI_10X_PDEV_PARAM_SET_PROMISC_MODE_CMDID, 3942 WMI_10X_PDEV_PARAM_PDEV_RESET 3943 }; 3944 3945 enum wmi_10_4_pdev_param { 3946 WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3947 WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK, 3948 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G, 3949 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G, 3950 WMI_10_4_PDEV_PARAM_TXPOWER_SCALE, 3951 WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE, 3952 WMI_10_4_PDEV_PARAM_BEACON_TX_MODE, 3953 WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3954 WMI_10_4_PDEV_PARAM_PROTECTION_MODE, 3955 WMI_10_4_PDEV_PARAM_DYNAMIC_BW, 3956 WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3957 WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH, 3958 WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH, 3959 WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3960 WMI_10_4_PDEV_PARAM_LTR_ENABLE, 3961 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE, 3962 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK, 3963 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI, 3964 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO, 3965 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3966 WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3967 WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE, 3968 WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3969 WMI_10_4_PDEV_PARAM_L1SS_ENABLE, 3970 WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE, 3971 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3972 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3973 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3974 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3975 WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3976 WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3977 WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3978 WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3979 WMI_10_4_PDEV_PARAM_PMF_QOS, 3980 WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE, 3981 WMI_10_4_PDEV_PARAM_DCS, 3982 WMI_10_4_PDEV_PARAM_ANI_ENABLE, 3983 WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD, 3984 WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD, 3985 WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL, 3986 WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL, 3987 WMI_10_4_PDEV_PARAM_DYNTXCHAIN, 3988 WMI_10_4_PDEV_PARAM_PROXY_STA, 3989 WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG, 3990 WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP, 3991 WMI_10_4_PDEV_PARAM_AGGR_BURST, 3992 WMI_10_4_PDEV_PARAM_RX_DECAP_MODE, 3993 WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET, 3994 WMI_10_4_PDEV_PARAM_BURST_DUR, 3995 WMI_10_4_PDEV_PARAM_BURST_ENABLE, 3996 WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 3997 WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE, 3998 WMI_10_4_PDEV_PARAM_IGMPMLD_TID, 3999 WMI_10_4_PDEV_PARAM_ANTENNA_GAIN, 4000 WMI_10_4_PDEV_PARAM_RX_FILTER, 4001 WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID, 4002 WMI_10_4_PDEV_PARAM_PROXY_STA_MODE, 4003 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE, 4004 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 4005 WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 4006 WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE, 4007 WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE, 4008 WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS, 4009 WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID, 4010 WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID, 4011 WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID, 4012 WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID, 4013 WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID, 4014 WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID, 4015 WMI_10_4_PDEV_PARAM_EN_STATS, 4016 WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY, 4017 WMI_10_4_PDEV_PARAM_NOISE_DETECTION, 4018 WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD, 4019 WMI_10_4_PDEV_PARAM_DPD_ENABLE, 4020 WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO, 4021 WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH, 4022 WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION, 4023 WMI_10_4_PDEV_PARAM_ANT_PLZN, 4024 WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT, 4025 WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL, 4026 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G, 4027 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G, 4028 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU, 4029 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU, 4030 WMI_10_4_PDEV_PARAM_CCA_THRESHOLD, 4031 WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE, 4032 WMI_10_4_PDEV_PARAM_CAL_PERIOD, 4033 WMI_10_4_PDEV_PARAM_PDEV_RESET, 4034 WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET, 4035 WMI_10_4_PDEV_PARAM_ARP_SRCADDR, 4036 WMI_10_4_PDEV_PARAM_ARP_DSTADDR, 4037 WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB, 4038 WMI_10_4_PDEV_PARAM_RX_BATCHMODE, 4039 WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY, 4040 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH, 4041 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR, 4042 WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE, 4043 WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE, 4044 WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY, 4045 WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, 4046 }; 4047 4048 struct wmi_pdev_set_param_cmd { 4049 __le32 param_id; 4050 __le32 param_value; 4051 } __packed; 4052 4053 /* valid period is 1 ~ 60000ms, unit in millisecond */ 4054 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000 4055 4056 struct wmi_pdev_get_tpc_config_cmd { 4057 /* parameter */ 4058 __le32 param; 4059 } __packed; 4060 4061 #define WMI_TPC_CONFIG_PARAM 1 4062 #define WMI_TPC_FINAL_RATE_MAX 240 4063 #define WMI_TPC_TX_N_CHAIN 4 4064 #define WMI_TPC_RATE_MAX (WMI_TPC_TX_N_CHAIN * 65) 4065 #define WMI_TPC_PREAM_TABLE_MAX 10 4066 #define WMI_TPC_FLAG 3 4067 #define WMI_TPC_BUF_SIZE 10 4068 #define WMI_TPC_BEAMFORMING 2 4069 4070 enum wmi_tpc_table_type { 4071 WMI_TPC_TABLE_TYPE_CDD = 0, 4072 WMI_TPC_TABLE_TYPE_STBC = 1, 4073 WMI_TPC_TABLE_TYPE_TXBF = 2, 4074 }; 4075 4076 enum wmi_tpc_config_event_flag { 4077 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, 4078 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, 4079 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, 4080 }; 4081 4082 struct wmi_pdev_tpc_config_event { 4083 __le32 reg_domain; 4084 __le32 chan_freq; 4085 __le32 phy_mode; 4086 __le32 twice_antenna_reduction; 4087 __le32 twice_max_rd_power; 4088 a_sle32 twice_antenna_gain; 4089 __le32 power_limit; 4090 __le32 rate_max; 4091 __le32 num_tx_chain; 4092 __le32 ctl; 4093 __le32 flags; 4094 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 4095 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4096 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4097 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4098 u8 rates_array[WMI_TPC_RATE_MAX]; 4099 } __packed; 4100 4101 /* Transmit power scale factor. */ 4102 enum wmi_tp_scale { 4103 WMI_TP_SCALE_MAX = 0, /* no scaling (default) */ 4104 WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ 4105 WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ 4106 WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ 4107 WMI_TP_SCALE_MIN = 4, /* min, but still on */ 4108 WMI_TP_SCALE_SIZE = 5, /* max num of enum */ 4109 }; 4110 4111 struct wmi_pdev_tpc_final_table_event { 4112 __le32 reg_domain; 4113 __le32 chan_freq; 4114 __le32 phy_mode; 4115 __le32 twice_antenna_reduction; 4116 __le32 twice_max_rd_power; 4117 a_sle32 twice_antenna_gain; 4118 __le32 power_limit; 4119 __le32 rate_max; 4120 __le32 num_tx_chain; 4121 __le32 ctl; 4122 __le32 flags; 4123 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 4124 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4125 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4126 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4127 u8 rates_array[WMI_TPC_FINAL_RATE_MAX]; 4128 u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN] 4129 [WMI_TPC_TX_N_CHAIN]; 4130 } __packed; 4131 4132 struct wmi_pdev_get_tpc_table_cmd { 4133 __le32 param; 4134 } __packed; 4135 4136 enum wmi_tpc_pream_2ghz { 4137 WMI_TPC_PREAM_2GHZ_CCK = 0, 4138 WMI_TPC_PREAM_2GHZ_OFDM, 4139 WMI_TPC_PREAM_2GHZ_HT20, 4140 WMI_TPC_PREAM_2GHZ_HT40, 4141 WMI_TPC_PREAM_2GHZ_VHT20, 4142 WMI_TPC_PREAM_2GHZ_VHT40, 4143 WMI_TPC_PREAM_2GHZ_VHT80, 4144 }; 4145 4146 enum wmi_tpc_pream_5ghz { 4147 WMI_TPC_PREAM_5GHZ_OFDM = 1, 4148 WMI_TPC_PREAM_5GHZ_HT20, 4149 WMI_TPC_PREAM_5GHZ_HT40, 4150 WMI_TPC_PREAM_5GHZ_VHT20, 4151 WMI_TPC_PREAM_5GHZ_VHT40, 4152 WMI_TPC_PREAM_5GHZ_VHT80, 4153 WMI_TPC_PREAM_5GHZ_HTCUP, 4154 }; 4155 4156 struct wmi_pdev_chanlist_update_event { 4157 /* number of channels */ 4158 __le32 num_chan; 4159 /* array of channels */ 4160 struct wmi_channel channel_list[1]; 4161 } __packed; 4162 4163 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32) 4164 4165 struct wmi_debug_mesg_event { 4166 /* message buffer, NULL terminated */ 4167 char bufp[WMI_MAX_DEBUG_MESG]; 4168 } __packed; 4169 4170 enum { 4171 /* P2P device */ 4172 VDEV_SUBTYPE_P2PDEV = 0, 4173 /* P2P client */ 4174 VDEV_SUBTYPE_P2PCLI, 4175 /* P2P GO */ 4176 VDEV_SUBTYPE_P2PGO, 4177 /* BT3.0 HS */ 4178 VDEV_SUBTYPE_BT, 4179 }; 4180 4181 struct wmi_pdev_set_channel_cmd { 4182 /* idnore power , only use flags , mode and freq */ 4183 struct wmi_channel chan; 4184 } __packed; 4185 4186 struct wmi_pdev_pktlog_enable_cmd { 4187 __le32 ev_bitmap; 4188 } __packed; 4189 4190 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */ 4191 #define WMI_DSCP_MAP_MAX (64) 4192 struct wmi_pdev_set_dscp_tid_map_cmd { 4193 /* map indicating DSCP to TID conversion */ 4194 __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX]; 4195 } __packed; 4196 4197 enum mcast_bcast_rate_id { 4198 WMI_SET_MCAST_RATE, 4199 WMI_SET_BCAST_RATE 4200 }; 4201 4202 struct mcast_bcast_rate { 4203 enum mcast_bcast_rate_id rate_id; 4204 __le32 rate; 4205 } __packed; 4206 4207 struct wmi_wmm_params { 4208 __le32 cwmin; 4209 __le32 cwmax; 4210 __le32 aifs; 4211 __le32 txop; 4212 __le32 acm; 4213 __le32 no_ack; 4214 } __packed; 4215 4216 struct wmi_pdev_set_wmm_params { 4217 struct wmi_wmm_params ac_be; 4218 struct wmi_wmm_params ac_bk; 4219 struct wmi_wmm_params ac_vi; 4220 struct wmi_wmm_params ac_vo; 4221 } __packed; 4222 4223 struct wmi_wmm_params_arg { 4224 u32 cwmin; 4225 u32 cwmax; 4226 u32 aifs; 4227 u32 txop; 4228 u32 acm; 4229 u32 no_ack; 4230 }; 4231 4232 struct wmi_wmm_params_all_arg { 4233 struct wmi_wmm_params_arg ac_be; 4234 struct wmi_wmm_params_arg ac_bk; 4235 struct wmi_wmm_params_arg ac_vi; 4236 struct wmi_wmm_params_arg ac_vo; 4237 }; 4238 4239 struct wmi_pdev_stats_tx { 4240 /* Num HTT cookies queued to dispatch list */ 4241 __le32 comp_queued; 4242 4243 /* Num HTT cookies dispatched */ 4244 __le32 comp_delivered; 4245 4246 /* Num MSDU queued to WAL */ 4247 __le32 msdu_enqued; 4248 4249 /* Num MPDU queue to WAL */ 4250 __le32 mpdu_enqued; 4251 4252 /* Num MSDUs dropped by WMM limit */ 4253 __le32 wmm_drop; 4254 4255 /* Num Local frames queued */ 4256 __le32 local_enqued; 4257 4258 /* Num Local frames done */ 4259 __le32 local_freed; 4260 4261 /* Num queued to HW */ 4262 __le32 hw_queued; 4263 4264 /* Num PPDU reaped from HW */ 4265 __le32 hw_reaped; 4266 4267 /* Num underruns */ 4268 __le32 underrun; 4269 4270 /* Num PPDUs cleaned up in TX abort */ 4271 __le32 tx_abort; 4272 4273 /* Num MPDUs requed by SW */ 4274 __le32 mpdus_requed; 4275 4276 /* excessive retries */ 4277 __le32 tx_ko; 4278 4279 /* data hw rate code */ 4280 __le32 data_rc; 4281 4282 /* Scheduler self triggers */ 4283 __le32 self_triggers; 4284 4285 /* frames dropped due to excessive sw retries */ 4286 __le32 sw_retry_failure; 4287 4288 /* illegal rate phy errors */ 4289 __le32 illgl_rate_phy_err; 4290 4291 /* wal pdev continuous xretry */ 4292 __le32 pdev_cont_xretry; 4293 4294 /* wal pdev continous xretry */ 4295 __le32 pdev_tx_timeout; 4296 4297 /* wal pdev resets */ 4298 __le32 pdev_resets; 4299 4300 /* frames dropped due to non-availability of stateless TIDs */ 4301 __le32 stateless_tid_alloc_failure; 4302 4303 __le32 phy_underrun; 4304 4305 /* MPDU is more than txop limit */ 4306 __le32 txop_ovf; 4307 } __packed; 4308 4309 struct wmi_10_4_pdev_stats_tx { 4310 /* Num HTT cookies queued to dispatch list */ 4311 __le32 comp_queued; 4312 4313 /* Num HTT cookies dispatched */ 4314 __le32 comp_delivered; 4315 4316 /* Num MSDU queued to WAL */ 4317 __le32 msdu_enqued; 4318 4319 /* Num MPDU queue to WAL */ 4320 __le32 mpdu_enqued; 4321 4322 /* Num MSDUs dropped by WMM limit */ 4323 __le32 wmm_drop; 4324 4325 /* Num Local frames queued */ 4326 __le32 local_enqued; 4327 4328 /* Num Local frames done */ 4329 __le32 local_freed; 4330 4331 /* Num queued to HW */ 4332 __le32 hw_queued; 4333 4334 /* Num PPDU reaped from HW */ 4335 __le32 hw_reaped; 4336 4337 /* Num underruns */ 4338 __le32 underrun; 4339 4340 /* HW Paused. */ 4341 __le32 hw_paused; 4342 4343 /* Num PPDUs cleaned up in TX abort */ 4344 __le32 tx_abort; 4345 4346 /* Num MPDUs requed by SW */ 4347 __le32 mpdus_requed; 4348 4349 /* excessive retries */ 4350 __le32 tx_ko; 4351 4352 /* data hw rate code */ 4353 __le32 data_rc; 4354 4355 /* Scheduler self triggers */ 4356 __le32 self_triggers; 4357 4358 /* frames dropped due to excessive sw retries */ 4359 __le32 sw_retry_failure; 4360 4361 /* illegal rate phy errors */ 4362 __le32 illgl_rate_phy_err; 4363 4364 /* wal pdev continuous xretry */ 4365 __le32 pdev_cont_xretry; 4366 4367 /* wal pdev tx timeouts */ 4368 __le32 pdev_tx_timeout; 4369 4370 /* wal pdev resets */ 4371 __le32 pdev_resets; 4372 4373 /* frames dropped due to non-availability of stateless TIDs */ 4374 __le32 stateless_tid_alloc_failure; 4375 4376 __le32 phy_underrun; 4377 4378 /* MPDU is more than txop limit */ 4379 __le32 txop_ovf; 4380 4381 /* Number of Sequences posted */ 4382 __le32 seq_posted; 4383 4384 /* Number of Sequences failed queueing */ 4385 __le32 seq_failed_queueing; 4386 4387 /* Number of Sequences completed */ 4388 __le32 seq_completed; 4389 4390 /* Number of Sequences restarted */ 4391 __le32 seq_restarted; 4392 4393 /* Number of MU Sequences posted */ 4394 __le32 mu_seq_posted; 4395 4396 /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */ 4397 __le32 mpdus_sw_flush; 4398 4399 /* Num MPDUs filtered by HW, all filter condition (TTL expired) */ 4400 __le32 mpdus_hw_filter; 4401 4402 /* Num MPDUs truncated by PDG 4403 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw) 4404 */ 4405 __le32 mpdus_truncated; 4406 4407 /* Num MPDUs that was tried but didn't receive ACK or BA */ 4408 __le32 mpdus_ack_failed; 4409 4410 /* Num MPDUs that was dropped due to expiry. */ 4411 __le32 mpdus_expired; 4412 } __packed; 4413 4414 struct wmi_pdev_stats_rx { 4415 /* Cnts any change in ring routing mid-ppdu */ 4416 __le32 mid_ppdu_route_change; 4417 4418 /* Total number of statuses processed */ 4419 __le32 status_rcvd; 4420 4421 /* Extra frags on rings 0-3 */ 4422 __le32 r0_frags; 4423 __le32 r1_frags; 4424 __le32 r2_frags; 4425 __le32 r3_frags; 4426 4427 /* MSDUs / MPDUs delivered to HTT */ 4428 __le32 htt_msdus; 4429 __le32 htt_mpdus; 4430 4431 /* MSDUs / MPDUs delivered to local stack */ 4432 __le32 loc_msdus; 4433 __le32 loc_mpdus; 4434 4435 /* AMSDUs that have more MSDUs than the status ring size */ 4436 __le32 oversize_amsdu; 4437 4438 /* Number of PHY errors */ 4439 __le32 phy_errs; 4440 4441 /* Number of PHY errors drops */ 4442 __le32 phy_err_drop; 4443 4444 /* Number of mpdu errors - FCS, MIC, ENC etc. */ 4445 __le32 mpdu_errs; 4446 } __packed; 4447 4448 struct wmi_pdev_stats_peer { 4449 /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ 4450 __le32 dummy; 4451 } __packed; 4452 4453 enum wmi_stats_id { 4454 WMI_STAT_PEER = BIT(0), 4455 WMI_STAT_AP = BIT(1), 4456 WMI_STAT_PDEV = BIT(2), 4457 WMI_STAT_VDEV = BIT(3), 4458 WMI_STAT_BCNFLT = BIT(4), 4459 WMI_STAT_VDEV_RATE = BIT(5), 4460 }; 4461 4462 enum wmi_10_4_stats_id { 4463 WMI_10_4_STAT_PEER = BIT(0), 4464 WMI_10_4_STAT_AP = BIT(1), 4465 WMI_10_4_STAT_INST = BIT(2), 4466 WMI_10_4_STAT_PEER_EXTD = BIT(3), 4467 WMI_10_4_STAT_VDEV_EXTD = BIT(4), 4468 }; 4469 4470 struct wlan_inst_rssi_args { 4471 __le16 cfg_retry_count; 4472 __le16 retry_count; 4473 }; 4474 4475 struct wmi_request_stats_cmd { 4476 __le32 stats_id; 4477 4478 __le32 vdev_id; 4479 4480 /* peer MAC address */ 4481 struct wmi_mac_addr peer_macaddr; 4482 4483 /* Instantaneous RSSI arguments */ 4484 struct wlan_inst_rssi_args inst_rssi_args; 4485 } __packed; 4486 4487 /* Suspend option */ 4488 enum { 4489 /* suspend */ 4490 WMI_PDEV_SUSPEND, 4491 4492 /* suspend and disable all interrupts */ 4493 WMI_PDEV_SUSPEND_AND_DISABLE_INTR, 4494 }; 4495 4496 struct wmi_pdev_suspend_cmd { 4497 /* suspend option sent to target */ 4498 __le32 suspend_opt; 4499 } __packed; 4500 4501 struct wmi_stats_event { 4502 __le32 stats_id; /* WMI_STAT_ */ 4503 /* 4504 * number of pdev stats event structures 4505 * (wmi_pdev_stats) 0 or 1 4506 */ 4507 __le32 num_pdev_stats; 4508 /* 4509 * number of vdev stats event structures 4510 * (wmi_vdev_stats) 0 or max vdevs 4511 */ 4512 __le32 num_vdev_stats; 4513 /* 4514 * number of peer stats event structures 4515 * (wmi_peer_stats) 0 or max peers 4516 */ 4517 __le32 num_peer_stats; 4518 __le32 num_bcnflt_stats; 4519 /* 4520 * followed by 4521 * num_pdev_stats * size of(struct wmi_pdev_stats) 4522 * num_vdev_stats * size of(struct wmi_vdev_stats) 4523 * num_peer_stats * size of(struct wmi_peer_stats) 4524 * 4525 * By having a zero sized array, the pointer to data area 4526 * becomes available without increasing the struct size 4527 */ 4528 u8 data[0]; 4529 } __packed; 4530 4531 struct wmi_10_2_stats_event { 4532 __le32 stats_id; /* %WMI_REQUEST_ */ 4533 __le32 num_pdev_stats; 4534 __le32 num_pdev_ext_stats; 4535 __le32 num_vdev_stats; 4536 __le32 num_peer_stats; 4537 __le32 num_bcnflt_stats; 4538 u8 data[0]; 4539 } __packed; 4540 4541 /* 4542 * PDEV statistics 4543 * TODO: add all PDEV stats here 4544 */ 4545 struct wmi_pdev_stats_base { 4546 __le32 chan_nf; 4547 __le32 tx_frame_count; /* Cycles spent transmitting frames */ 4548 __le32 rx_frame_count; /* Cycles spent receiving frames */ 4549 __le32 rx_clear_count; /* Total channel busy time, evidently */ 4550 __le32 cycle_count; /* Total on-channel time */ 4551 __le32 phy_err_count; 4552 __le32 chan_tx_pwr; 4553 } __packed; 4554 4555 struct wmi_pdev_stats { 4556 struct wmi_pdev_stats_base base; 4557 struct wmi_pdev_stats_tx tx; 4558 struct wmi_pdev_stats_rx rx; 4559 struct wmi_pdev_stats_peer peer; 4560 } __packed; 4561 4562 struct wmi_pdev_stats_extra { 4563 __le32 ack_rx_bad; 4564 __le32 rts_bad; 4565 __le32 rts_good; 4566 __le32 fcs_bad; 4567 __le32 no_beacons; 4568 __le32 mib_int_count; 4569 } __packed; 4570 4571 struct wmi_10x_pdev_stats { 4572 struct wmi_pdev_stats_base base; 4573 struct wmi_pdev_stats_tx tx; 4574 struct wmi_pdev_stats_rx rx; 4575 struct wmi_pdev_stats_peer peer; 4576 struct wmi_pdev_stats_extra extra; 4577 } __packed; 4578 4579 struct wmi_pdev_stats_mem { 4580 __le32 dram_free; 4581 __le32 iram_free; 4582 } __packed; 4583 4584 struct wmi_10_2_pdev_stats { 4585 struct wmi_pdev_stats_base base; 4586 struct wmi_pdev_stats_tx tx; 4587 __le32 mc_drop; 4588 struct wmi_pdev_stats_rx rx; 4589 __le32 pdev_rx_timeout; 4590 struct wmi_pdev_stats_mem mem; 4591 struct wmi_pdev_stats_peer peer; 4592 struct wmi_pdev_stats_extra extra; 4593 } __packed; 4594 4595 struct wmi_10_4_pdev_stats { 4596 struct wmi_pdev_stats_base base; 4597 struct wmi_10_4_pdev_stats_tx tx; 4598 struct wmi_pdev_stats_rx rx; 4599 __le32 rx_ovfl_errs; 4600 struct wmi_pdev_stats_mem mem; 4601 __le32 sram_free_size; 4602 struct wmi_pdev_stats_extra extra; 4603 } __packed; 4604 4605 /* 4606 * VDEV statistics 4607 */ 4608 4609 #define WMI_VDEV_STATS_FTM_COUNT_VALID BIT(31) 4610 #define WMI_VDEV_STATS_FTM_COUNT_LSB 0 4611 #define WMI_VDEV_STATS_FTM_COUNT_MASK 0x7fffffff 4612 4613 struct wmi_vdev_stats { 4614 __le32 vdev_id; 4615 } __packed; 4616 4617 struct wmi_vdev_stats_extd { 4618 __le32 vdev_id; 4619 __le32 ppdu_aggr_cnt; 4620 __le32 ppdu_noack; 4621 __le32 mpdu_queued; 4622 __le32 ppdu_nonaggr_cnt; 4623 __le32 mpdu_sw_requeued; 4624 __le32 mpdu_suc_retry; 4625 __le32 mpdu_suc_multitry; 4626 __le32 mpdu_fail_retry; 4627 __le32 tx_ftm_suc; 4628 __le32 tx_ftm_suc_retry; 4629 __le32 tx_ftm_fail; 4630 __le32 rx_ftmr_cnt; 4631 __le32 rx_ftmr_dup_cnt; 4632 __le32 rx_iftmr_cnt; 4633 __le32 rx_iftmr_dup_cnt; 4634 __le32 reserved[6]; 4635 } __packed; 4636 4637 /* 4638 * peer statistics. 4639 * TODO: add more stats 4640 */ 4641 struct wmi_peer_stats { 4642 struct wmi_mac_addr peer_macaddr; 4643 __le32 peer_rssi; 4644 __le32 peer_tx_rate; 4645 } __packed; 4646 4647 struct wmi_10x_peer_stats { 4648 struct wmi_peer_stats old; 4649 __le32 peer_rx_rate; 4650 } __packed; 4651 4652 struct wmi_10_2_peer_stats { 4653 struct wmi_peer_stats old; 4654 __le32 peer_rx_rate; 4655 __le32 current_per; 4656 __le32 retries; 4657 __le32 tx_rate_count; 4658 __le32 max_4ms_frame_len; 4659 __le32 total_sub_frames; 4660 __le32 tx_bytes; 4661 __le32 num_pkt_loss_overflow[4]; 4662 __le32 num_pkt_loss_excess_retry[4]; 4663 } __packed; 4664 4665 struct wmi_10_2_4_peer_stats { 4666 struct wmi_10_2_peer_stats common; 4667 __le32 peer_rssi_changed; 4668 } __packed; 4669 4670 struct wmi_10_2_4_ext_peer_stats { 4671 struct wmi_10_2_peer_stats common; 4672 __le32 peer_rssi_changed; 4673 __le32 rx_duration; 4674 } __packed; 4675 4676 struct wmi_10_4_peer_stats { 4677 struct wmi_mac_addr peer_macaddr; 4678 __le32 peer_rssi; 4679 __le32 peer_rssi_seq_num; 4680 __le32 peer_tx_rate; 4681 __le32 peer_rx_rate; 4682 __le32 current_per; 4683 __le32 retries; 4684 __le32 tx_rate_count; 4685 __le32 max_4ms_frame_len; 4686 __le32 total_sub_frames; 4687 __le32 tx_bytes; 4688 __le32 num_pkt_loss_overflow[4]; 4689 __le32 num_pkt_loss_excess_retry[4]; 4690 __le32 peer_rssi_changed; 4691 } __packed; 4692 4693 struct wmi_10_4_peer_extd_stats { 4694 struct wmi_mac_addr peer_macaddr; 4695 __le32 inactive_time; 4696 __le32 peer_chain_rssi; 4697 __le32 rx_duration; 4698 __le32 reserved[10]; 4699 } __packed; 4700 4701 struct wmi_10_4_bss_bcn_stats { 4702 __le32 vdev_id; 4703 __le32 bss_bcns_dropped; 4704 __le32 bss_bcn_delivered; 4705 } __packed; 4706 4707 struct wmi_10_4_bss_bcn_filter_stats { 4708 __le32 bcns_dropped; 4709 __le32 bcns_delivered; 4710 __le32 active_filters; 4711 struct wmi_10_4_bss_bcn_stats bss_stats; 4712 } __packed; 4713 4714 struct wmi_10_2_pdev_ext_stats { 4715 __le32 rx_rssi_comb; 4716 __le32 rx_rssi[4]; 4717 __le32 rx_mcs[10]; 4718 __le32 tx_mcs[10]; 4719 __le32 ack_rssi; 4720 } __packed; 4721 4722 struct wmi_vdev_create_cmd { 4723 __le32 vdev_id; 4724 __le32 vdev_type; 4725 __le32 vdev_subtype; 4726 struct wmi_mac_addr vdev_macaddr; 4727 } __packed; 4728 4729 enum wmi_vdev_type { 4730 WMI_VDEV_TYPE_AP = 1, 4731 WMI_VDEV_TYPE_STA = 2, 4732 WMI_VDEV_TYPE_IBSS = 3, 4733 WMI_VDEV_TYPE_MONITOR = 4, 4734 }; 4735 4736 enum wmi_vdev_subtype { 4737 WMI_VDEV_SUBTYPE_NONE, 4738 WMI_VDEV_SUBTYPE_P2P_DEVICE, 4739 WMI_VDEV_SUBTYPE_P2P_CLIENT, 4740 WMI_VDEV_SUBTYPE_P2P_GO, 4741 WMI_VDEV_SUBTYPE_PROXY_STA, 4742 WMI_VDEV_SUBTYPE_MESH_11S, 4743 WMI_VDEV_SUBTYPE_MESH_NON_11S, 4744 }; 4745 4746 enum wmi_vdev_subtype_legacy { 4747 WMI_VDEV_SUBTYPE_LEGACY_NONE = 0, 4748 WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1, 4749 WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2, 4750 WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3, 4751 WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4, 4752 }; 4753 4754 enum wmi_vdev_subtype_10_2_4 { 4755 WMI_VDEV_SUBTYPE_10_2_4_NONE = 0, 4756 WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1, 4757 WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2, 4758 WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3, 4759 WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4, 4760 WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5, 4761 }; 4762 4763 enum wmi_vdev_subtype_10_4 { 4764 WMI_VDEV_SUBTYPE_10_4_NONE = 0, 4765 WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1, 4766 WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2, 4767 WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3, 4768 WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4, 4769 WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5, 4770 WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6, 4771 }; 4772 4773 /* values for vdev_subtype */ 4774 4775 /* values for vdev_start_request flags */ 4776 /* 4777 * Indicates that AP VDEV uses hidden ssid. only valid for 4778 * AP/GO 4779 */ 4780 #define WMI_VDEV_START_HIDDEN_SSID (1 << 0) 4781 /* 4782 * Indicates if robust management frame/management frame 4783 * protection is enabled. For GO/AP vdevs, it indicates that 4784 * it may support station/client associations with RMF enabled. 4785 * For STA/client vdevs, it indicates that sta will 4786 * associate with AP with RMF enabled. 4787 */ 4788 #define WMI_VDEV_START_PMF_ENABLED (1 << 1) 4789 4790 struct wmi_p2p_noa_descriptor { 4791 __le32 type_count; /* 255: continuous schedule, 0: reserved */ 4792 __le32 duration; /* Absent period duration in micro seconds */ 4793 __le32 interval; /* Absent period interval in micro seconds */ 4794 __le32 start_time; /* 32 bit tsf time when in starts */ 4795 } __packed; 4796 4797 struct wmi_vdev_start_request_cmd { 4798 /* WMI channel */ 4799 struct wmi_channel chan; 4800 /* unique id identifying the VDEV, generated by the caller */ 4801 __le32 vdev_id; 4802 /* requestor id identifying the caller module */ 4803 __le32 requestor_id; 4804 /* beacon interval from received beacon */ 4805 __le32 beacon_interval; 4806 /* DTIM Period from the received beacon */ 4807 __le32 dtim_period; 4808 /* Flags */ 4809 __le32 flags; 4810 /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ 4811 struct wmi_ssid ssid; 4812 /* beacon/probe response xmit rate. Applicable for SoftAP. */ 4813 __le32 bcn_tx_rate; 4814 /* beacon/probe response xmit power. Applicable for SoftAP. */ 4815 __le32 bcn_tx_power; 4816 /* number of p2p NOA descriptor(s) from scan entry */ 4817 __le32 num_noa_descriptors; 4818 /* 4819 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID. 4820 * During CAC, Our HW shouldn't ack ditected frames 4821 */ 4822 __le32 disable_hw_ack; 4823 /* actual p2p NOA descriptor from scan entry */ 4824 struct wmi_p2p_noa_descriptor noa_descriptors[2]; 4825 } __packed; 4826 4827 struct wmi_vdev_restart_request_cmd { 4828 struct wmi_vdev_start_request_cmd vdev_start_request_cmd; 4829 } __packed; 4830 4831 struct wmi_vdev_start_request_arg { 4832 u32 vdev_id; 4833 struct wmi_channel_arg channel; 4834 u32 bcn_intval; 4835 u32 dtim_period; 4836 u8 *ssid; 4837 u32 ssid_len; 4838 u32 bcn_tx_rate; 4839 u32 bcn_tx_power; 4840 bool disable_hw_ack; 4841 bool hidden_ssid; 4842 bool pmf_enabled; 4843 }; 4844 4845 struct wmi_vdev_delete_cmd { 4846 /* unique id identifying the VDEV, generated by the caller */ 4847 __le32 vdev_id; 4848 } __packed; 4849 4850 struct wmi_vdev_up_cmd { 4851 __le32 vdev_id; 4852 __le32 vdev_assoc_id; 4853 struct wmi_mac_addr vdev_bssid; 4854 } __packed; 4855 4856 struct wmi_vdev_stop_cmd { 4857 __le32 vdev_id; 4858 } __packed; 4859 4860 struct wmi_vdev_down_cmd { 4861 __le32 vdev_id; 4862 } __packed; 4863 4864 struct wmi_vdev_standby_response_cmd { 4865 /* unique id identifying the VDEV, generated by the caller */ 4866 __le32 vdev_id; 4867 } __packed; 4868 4869 struct wmi_vdev_resume_response_cmd { 4870 /* unique id identifying the VDEV, generated by the caller */ 4871 __le32 vdev_id; 4872 } __packed; 4873 4874 struct wmi_vdev_set_param_cmd { 4875 __le32 vdev_id; 4876 __le32 param_id; 4877 __le32 param_value; 4878 } __packed; 4879 4880 #define WMI_MAX_KEY_INDEX 3 4881 #define WMI_MAX_KEY_LEN 32 4882 4883 #define WMI_KEY_PAIRWISE 0x00 4884 #define WMI_KEY_GROUP 0x01 4885 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */ 4886 4887 struct wmi_key_seq_counter { 4888 __le32 key_seq_counter_l; 4889 __le32 key_seq_counter_h; 4890 } __packed; 4891 4892 #define WMI_CIPHER_NONE 0x0 /* clear key */ 4893 #define WMI_CIPHER_WEP 0x1 4894 #define WMI_CIPHER_TKIP 0x2 4895 #define WMI_CIPHER_AES_OCB 0x3 4896 #define WMI_CIPHER_AES_CCM 0x4 4897 #define WMI_CIPHER_WAPI 0x5 4898 #define WMI_CIPHER_CKIP 0x6 4899 #define WMI_CIPHER_AES_CMAC 0x7 4900 #define WMI_CIPHER_AES_GCM 0x8 4901 4902 struct wmi_vdev_install_key_cmd { 4903 __le32 vdev_id; 4904 struct wmi_mac_addr peer_macaddr; 4905 __le32 key_idx; 4906 __le32 key_flags; 4907 __le32 key_cipher; /* %WMI_CIPHER_ */ 4908 struct wmi_key_seq_counter key_rsc_counter; 4909 struct wmi_key_seq_counter key_global_rsc_counter; 4910 struct wmi_key_seq_counter key_tsc_counter; 4911 u8 wpi_key_rsc_counter[16]; 4912 u8 wpi_key_tsc_counter[16]; 4913 __le32 key_len; 4914 __le32 key_txmic_len; 4915 __le32 key_rxmic_len; 4916 4917 /* contains key followed by tx mic followed by rx mic */ 4918 u8 key_data[0]; 4919 } __packed; 4920 4921 struct wmi_vdev_install_key_arg { 4922 u32 vdev_id; 4923 const u8 *macaddr; 4924 u32 key_idx; 4925 u32 key_flags; 4926 u32 key_cipher; 4927 u32 key_len; 4928 u32 key_txmic_len; 4929 u32 key_rxmic_len; 4930 const void *key_data; 4931 }; 4932 4933 /* 4934 * vdev fixed rate format: 4935 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_ 4936 * - nss - b5:b4 - ss number (0 mean 1ss) 4937 * - rate_mcs - b3:b0 - as below 4938 * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps, 4939 * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s) 4940 * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps, 4941 * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps 4942 * HT/VHT: MCS index 4943 */ 4944 4945 /* Preamble types to be used with VDEV fixed rate configuration */ 4946 enum wmi_rate_preamble { 4947 WMI_RATE_PREAMBLE_OFDM, 4948 WMI_RATE_PREAMBLE_CCK, 4949 WMI_RATE_PREAMBLE_HT, 4950 WMI_RATE_PREAMBLE_VHT, 4951 }; 4952 4953 #define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3)) 4954 #define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3) 4955 #define ATH10K_HW_MCS_RATE(rate) ((rate) & 0xf) 4956 #define ATH10K_HW_LEGACY_RATE(rate) ((rate) & 0x3f) 4957 #define ATH10K_HW_BW(flags) (((flags) >> 3) & 0x3) 4958 #define ATH10K_HW_GI(flags) (((flags) >> 5) & 0x1) 4959 #define ATH10K_HW_RATECODE(rate, nss, preamble) \ 4960 (((preamble) << 6) | ((nss) << 4) | (rate)) 4961 #define ATH10K_HW_AMPDU(flags) ((flags) & 0x1) 4962 #define ATH10K_HW_BA_FAIL(flags) (((flags) >> 1) & 0x3) 4963 4964 #define ATH10K_VHT_MCS_NUM 10 4965 #define ATH10K_BW_NUM 4 4966 #define ATH10K_NSS_NUM 4 4967 #define ATH10K_LEGACY_NUM 12 4968 #define ATH10K_GI_NUM 2 4969 #define ATH10K_HT_MCS_NUM 32 4970 4971 /* Value to disable fixed rate setting */ 4972 #define WMI_FIXED_RATE_NONE (0xff) 4973 4974 struct wmi_vdev_param_map { 4975 u32 rts_threshold; 4976 u32 fragmentation_threshold; 4977 u32 beacon_interval; 4978 u32 listen_interval; 4979 u32 multicast_rate; 4980 u32 mgmt_tx_rate; 4981 u32 slot_time; 4982 u32 preamble; 4983 u32 swba_time; 4984 u32 wmi_vdev_stats_update_period; 4985 u32 wmi_vdev_pwrsave_ageout_time; 4986 u32 wmi_vdev_host_swba_interval; 4987 u32 dtim_period; 4988 u32 wmi_vdev_oc_scheduler_air_time_limit; 4989 u32 wds; 4990 u32 atim_window; 4991 u32 bmiss_count_max; 4992 u32 bmiss_first_bcnt; 4993 u32 bmiss_final_bcnt; 4994 u32 feature_wmm; 4995 u32 chwidth; 4996 u32 chextoffset; 4997 u32 disable_htprotection; 4998 u32 sta_quickkickout; 4999 u32 mgmt_rate; 5000 u32 protection_mode; 5001 u32 fixed_rate; 5002 u32 sgi; 5003 u32 ldpc; 5004 u32 tx_stbc; 5005 u32 rx_stbc; 5006 u32 intra_bss_fwd; 5007 u32 def_keyid; 5008 u32 nss; 5009 u32 bcast_data_rate; 5010 u32 mcast_data_rate; 5011 u32 mcast_indicate; 5012 u32 dhcp_indicate; 5013 u32 unknown_dest_indicate; 5014 u32 ap_keepalive_min_idle_inactive_time_secs; 5015 u32 ap_keepalive_max_idle_inactive_time_secs; 5016 u32 ap_keepalive_max_unresponsive_time_secs; 5017 u32 ap_enable_nawds; 5018 u32 mcast2ucast_set; 5019 u32 enable_rtscts; 5020 u32 txbf; 5021 u32 packet_powersave; 5022 u32 drop_unencry; 5023 u32 tx_encap_type; 5024 u32 ap_detect_out_of_sync_sleeping_sta_time_secs; 5025 u32 rc_num_retries; 5026 u32 cabq_maxdur; 5027 u32 mfptest_set; 5028 u32 rts_fixed_rate; 5029 u32 vht_sgimask; 5030 u32 vht80_ratemask; 5031 u32 early_rx_adjust_enable; 5032 u32 early_rx_tgt_bmiss_num; 5033 u32 early_rx_bmiss_sample_cycle; 5034 u32 early_rx_slop_step; 5035 u32 early_rx_init_slop; 5036 u32 early_rx_adjust_pause; 5037 u32 proxy_sta; 5038 u32 meru_vc; 5039 u32 rx_decap_type; 5040 u32 bw_nss_ratemask; 5041 u32 inc_tsf; 5042 u32 dec_tsf; 5043 }; 5044 5045 #define WMI_VDEV_PARAM_UNSUPPORTED 0 5046 5047 /* the definition of different VDEV parameters */ 5048 enum wmi_vdev_param { 5049 /* RTS Threshold */ 5050 WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5051 /* Fragmentation threshold */ 5052 WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5053 /* beacon interval in TUs */ 5054 WMI_VDEV_PARAM_BEACON_INTERVAL, 5055 /* Listen interval in TUs */ 5056 WMI_VDEV_PARAM_LISTEN_INTERVAL, 5057 /* multicast rate in Mbps */ 5058 WMI_VDEV_PARAM_MULTICAST_RATE, 5059 /* management frame rate in Mbps */ 5060 WMI_VDEV_PARAM_MGMT_TX_RATE, 5061 /* slot time (long vs short) */ 5062 WMI_VDEV_PARAM_SLOT_TIME, 5063 /* preamble (long vs short) */ 5064 WMI_VDEV_PARAM_PREAMBLE, 5065 /* SWBA time (time before tbtt in msec) */ 5066 WMI_VDEV_PARAM_SWBA_TIME, 5067 /* time period for updating VDEV stats */ 5068 WMI_VDEV_STATS_UPDATE_PERIOD, 5069 /* age out time in msec for frames queued for station in power save */ 5070 WMI_VDEV_PWRSAVE_AGEOUT_TIME, 5071 /* 5072 * Host SWBA interval (time in msec before tbtt for SWBA event 5073 * generation). 5074 */ 5075 WMI_VDEV_HOST_SWBA_INTERVAL, 5076 /* DTIM period (specified in units of num beacon intervals) */ 5077 WMI_VDEV_PARAM_DTIM_PERIOD, 5078 /* 5079 * scheduler air time limit for this VDEV. used by off chan 5080 * scheduler. 5081 */ 5082 WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5083 /* enable/dsiable WDS for this VDEV */ 5084 WMI_VDEV_PARAM_WDS, 5085 /* ATIM Window */ 5086 WMI_VDEV_PARAM_ATIM_WINDOW, 5087 /* BMISS max */ 5088 WMI_VDEV_PARAM_BMISS_COUNT_MAX, 5089 /* BMISS first time */ 5090 WMI_VDEV_PARAM_BMISS_FIRST_BCNT, 5091 /* BMISS final time */ 5092 WMI_VDEV_PARAM_BMISS_FINAL_BCNT, 5093 /* WMM enables/disabled */ 5094 WMI_VDEV_PARAM_FEATURE_WMM, 5095 /* Channel width */ 5096 WMI_VDEV_PARAM_CHWIDTH, 5097 /* Channel Offset */ 5098 WMI_VDEV_PARAM_CHEXTOFFSET, 5099 /* Disable HT Protection */ 5100 WMI_VDEV_PARAM_DISABLE_HTPROTECTION, 5101 /* Quick STA Kickout */ 5102 WMI_VDEV_PARAM_STA_QUICKKICKOUT, 5103 /* Rate to be used with Management frames */ 5104 WMI_VDEV_PARAM_MGMT_RATE, 5105 /* Protection Mode */ 5106 WMI_VDEV_PARAM_PROTECTION_MODE, 5107 /* Fixed rate setting */ 5108 WMI_VDEV_PARAM_FIXED_RATE, 5109 /* Short GI Enable/Disable */ 5110 WMI_VDEV_PARAM_SGI, 5111 /* Enable LDPC */ 5112 WMI_VDEV_PARAM_LDPC, 5113 /* Enable Tx STBC */ 5114 WMI_VDEV_PARAM_TX_STBC, 5115 /* Enable Rx STBC */ 5116 WMI_VDEV_PARAM_RX_STBC, 5117 /* Intra BSS forwarding */ 5118 WMI_VDEV_PARAM_INTRA_BSS_FWD, 5119 /* Setting Default xmit key for Vdev */ 5120 WMI_VDEV_PARAM_DEF_KEYID, 5121 /* NSS width */ 5122 WMI_VDEV_PARAM_NSS, 5123 /* Set the custom rate for the broadcast data frames */ 5124 WMI_VDEV_PARAM_BCAST_DATA_RATE, 5125 /* Set the custom rate (rate-code) for multicast data frames */ 5126 WMI_VDEV_PARAM_MCAST_DATA_RATE, 5127 /* Tx multicast packet indicate Enable/Disable */ 5128 WMI_VDEV_PARAM_MCAST_INDICATE, 5129 /* Tx DHCP packet indicate Enable/Disable */ 5130 WMI_VDEV_PARAM_DHCP_INDICATE, 5131 /* Enable host inspection of Tx unicast packet to unknown destination */ 5132 WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5133 5134 /* The minimum amount of time AP begins to consider STA inactive */ 5135 WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5136 5137 /* 5138 * An associated STA is considered inactive when there is no recent 5139 * TX/RX activity and no downlink frames are buffered for it. Once a 5140 * STA exceeds the maximum idle inactive time, the AP will send an 5141 * 802.11 data-null as a keep alive to verify the STA is still 5142 * associated. If the STA does ACK the data-null, or if the data-null 5143 * is buffered and the STA does not retrieve it, the STA will be 5144 * considered unresponsive 5145 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 5146 */ 5147 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5148 5149 /* 5150 * An associated STA is considered unresponsive if there is no recent 5151 * TX/RX activity and downlink frames are buffered for it. Once a STA 5152 * exceeds the maximum unresponsive time, the AP will send a 5153 * WMI_STA_KICKOUT event to the host so the STA can be deleted. 5154 */ 5155 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5156 5157 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 5158 WMI_VDEV_PARAM_AP_ENABLE_NAWDS, 5159 /* Enable/Disable RTS-CTS */ 5160 WMI_VDEV_PARAM_ENABLE_RTSCTS, 5161 /* Enable TXBFee/er */ 5162 WMI_VDEV_PARAM_TXBF, 5163 5164 /* Set packet power save */ 5165 WMI_VDEV_PARAM_PACKET_POWERSAVE, 5166 5167 /* 5168 * Drops un-encrypted packets if eceived in an encrypted connection 5169 * otherwise forwards to host. 5170 */ 5171 WMI_VDEV_PARAM_DROP_UNENCRY, 5172 5173 /* 5174 * Set the encapsulation type for frames. 5175 */ 5176 WMI_VDEV_PARAM_TX_ENCAP_TYPE, 5177 }; 5178 5179 /* the definition of different VDEV parameters */ 5180 enum wmi_10x_vdev_param { 5181 /* RTS Threshold */ 5182 WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5183 /* Fragmentation threshold */ 5184 WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5185 /* beacon interval in TUs */ 5186 WMI_10X_VDEV_PARAM_BEACON_INTERVAL, 5187 /* Listen interval in TUs */ 5188 WMI_10X_VDEV_PARAM_LISTEN_INTERVAL, 5189 /* multicast rate in Mbps */ 5190 WMI_10X_VDEV_PARAM_MULTICAST_RATE, 5191 /* management frame rate in Mbps */ 5192 WMI_10X_VDEV_PARAM_MGMT_TX_RATE, 5193 /* slot time (long vs short) */ 5194 WMI_10X_VDEV_PARAM_SLOT_TIME, 5195 /* preamble (long vs short) */ 5196 WMI_10X_VDEV_PARAM_PREAMBLE, 5197 /* SWBA time (time before tbtt in msec) */ 5198 WMI_10X_VDEV_PARAM_SWBA_TIME, 5199 /* time period for updating VDEV stats */ 5200 WMI_10X_VDEV_STATS_UPDATE_PERIOD, 5201 /* age out time in msec for frames queued for station in power save */ 5202 WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME, 5203 /* 5204 * Host SWBA interval (time in msec before tbtt for SWBA event 5205 * generation). 5206 */ 5207 WMI_10X_VDEV_HOST_SWBA_INTERVAL, 5208 /* DTIM period (specified in units of num beacon intervals) */ 5209 WMI_10X_VDEV_PARAM_DTIM_PERIOD, 5210 /* 5211 * scheduler air time limit for this VDEV. used by off chan 5212 * scheduler. 5213 */ 5214 WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5215 /* enable/dsiable WDS for this VDEV */ 5216 WMI_10X_VDEV_PARAM_WDS, 5217 /* ATIM Window */ 5218 WMI_10X_VDEV_PARAM_ATIM_WINDOW, 5219 /* BMISS max */ 5220 WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX, 5221 /* WMM enables/disabled */ 5222 WMI_10X_VDEV_PARAM_FEATURE_WMM, 5223 /* Channel width */ 5224 WMI_10X_VDEV_PARAM_CHWIDTH, 5225 /* Channel Offset */ 5226 WMI_10X_VDEV_PARAM_CHEXTOFFSET, 5227 /* Disable HT Protection */ 5228 WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION, 5229 /* Quick STA Kickout */ 5230 WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT, 5231 /* Rate to be used with Management frames */ 5232 WMI_10X_VDEV_PARAM_MGMT_RATE, 5233 /* Protection Mode */ 5234 WMI_10X_VDEV_PARAM_PROTECTION_MODE, 5235 /* Fixed rate setting */ 5236 WMI_10X_VDEV_PARAM_FIXED_RATE, 5237 /* Short GI Enable/Disable */ 5238 WMI_10X_VDEV_PARAM_SGI, 5239 /* Enable LDPC */ 5240 WMI_10X_VDEV_PARAM_LDPC, 5241 /* Enable Tx STBC */ 5242 WMI_10X_VDEV_PARAM_TX_STBC, 5243 /* Enable Rx STBC */ 5244 WMI_10X_VDEV_PARAM_RX_STBC, 5245 /* Intra BSS forwarding */ 5246 WMI_10X_VDEV_PARAM_INTRA_BSS_FWD, 5247 /* Setting Default xmit key for Vdev */ 5248 WMI_10X_VDEV_PARAM_DEF_KEYID, 5249 /* NSS width */ 5250 WMI_10X_VDEV_PARAM_NSS, 5251 /* Set the custom rate for the broadcast data frames */ 5252 WMI_10X_VDEV_PARAM_BCAST_DATA_RATE, 5253 /* Set the custom rate (rate-code) for multicast data frames */ 5254 WMI_10X_VDEV_PARAM_MCAST_DATA_RATE, 5255 /* Tx multicast packet indicate Enable/Disable */ 5256 WMI_10X_VDEV_PARAM_MCAST_INDICATE, 5257 /* Tx DHCP packet indicate Enable/Disable */ 5258 WMI_10X_VDEV_PARAM_DHCP_INDICATE, 5259 /* Enable host inspection of Tx unicast packet to unknown destination */ 5260 WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5261 5262 /* The minimum amount of time AP begins to consider STA inactive */ 5263 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5264 5265 /* 5266 * An associated STA is considered inactive when there is no recent 5267 * TX/RX activity and no downlink frames are buffered for it. Once a 5268 * STA exceeds the maximum idle inactive time, the AP will send an 5269 * 802.11 data-null as a keep alive to verify the STA is still 5270 * associated. If the STA does ACK the data-null, or if the data-null 5271 * is buffered and the STA does not retrieve it, the STA will be 5272 * considered unresponsive 5273 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 5274 */ 5275 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5276 5277 /* 5278 * An associated STA is considered unresponsive if there is no recent 5279 * TX/RX activity and downlink frames are buffered for it. Once a STA 5280 * exceeds the maximum unresponsive time, the AP will send a 5281 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. 5282 */ 5283 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5284 5285 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 5286 WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS, 5287 5288 WMI_10X_VDEV_PARAM_MCAST2UCAST_SET, 5289 /* Enable/Disable RTS-CTS */ 5290 WMI_10X_VDEV_PARAM_ENABLE_RTSCTS, 5291 5292 WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 5293 5294 /* following are available as of firmware 10.2 */ 5295 WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE, 5296 WMI_10X_VDEV_PARAM_CABQ_MAXDUR, 5297 WMI_10X_VDEV_PARAM_MFPTEST_SET, 5298 WMI_10X_VDEV_PARAM_RTS_FIXED_RATE, 5299 WMI_10X_VDEV_PARAM_VHT_SGIMASK, 5300 WMI_10X_VDEV_PARAM_VHT80_RATEMASK, 5301 WMI_10X_VDEV_PARAM_TSF_INCREMENT, 5302 }; 5303 5304 enum wmi_10_4_vdev_param { 5305 WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5306 WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5307 WMI_10_4_VDEV_PARAM_BEACON_INTERVAL, 5308 WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL, 5309 WMI_10_4_VDEV_PARAM_MULTICAST_RATE, 5310 WMI_10_4_VDEV_PARAM_MGMT_TX_RATE, 5311 WMI_10_4_VDEV_PARAM_SLOT_TIME, 5312 WMI_10_4_VDEV_PARAM_PREAMBLE, 5313 WMI_10_4_VDEV_PARAM_SWBA_TIME, 5314 WMI_10_4_VDEV_STATS_UPDATE_PERIOD, 5315 WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME, 5316 WMI_10_4_VDEV_HOST_SWBA_INTERVAL, 5317 WMI_10_4_VDEV_PARAM_DTIM_PERIOD, 5318 WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5319 WMI_10_4_VDEV_PARAM_WDS, 5320 WMI_10_4_VDEV_PARAM_ATIM_WINDOW, 5321 WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX, 5322 WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT, 5323 WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT, 5324 WMI_10_4_VDEV_PARAM_FEATURE_WMM, 5325 WMI_10_4_VDEV_PARAM_CHWIDTH, 5326 WMI_10_4_VDEV_PARAM_CHEXTOFFSET, 5327 WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION, 5328 WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT, 5329 WMI_10_4_VDEV_PARAM_MGMT_RATE, 5330 WMI_10_4_VDEV_PARAM_PROTECTION_MODE, 5331 WMI_10_4_VDEV_PARAM_FIXED_RATE, 5332 WMI_10_4_VDEV_PARAM_SGI, 5333 WMI_10_4_VDEV_PARAM_LDPC, 5334 WMI_10_4_VDEV_PARAM_TX_STBC, 5335 WMI_10_4_VDEV_PARAM_RX_STBC, 5336 WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD, 5337 WMI_10_4_VDEV_PARAM_DEF_KEYID, 5338 WMI_10_4_VDEV_PARAM_NSS, 5339 WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE, 5340 WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE, 5341 WMI_10_4_VDEV_PARAM_MCAST_INDICATE, 5342 WMI_10_4_VDEV_PARAM_DHCP_INDICATE, 5343 WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5344 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5345 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5346 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5347 WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS, 5348 WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET, 5349 WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS, 5350 WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES, 5351 WMI_10_4_VDEV_PARAM_TXBF, 5352 WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE, 5353 WMI_10_4_VDEV_PARAM_DROP_UNENCRY, 5354 WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE, 5355 WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 5356 WMI_10_4_VDEV_PARAM_CABQ_MAXDUR, 5357 WMI_10_4_VDEV_PARAM_MFPTEST_SET, 5358 WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE, 5359 WMI_10_4_VDEV_PARAM_VHT_SGIMASK, 5360 WMI_10_4_VDEV_PARAM_VHT80_RATEMASK, 5361 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE, 5362 WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM, 5363 WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE, 5364 WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP, 5365 WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP, 5366 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE, 5367 WMI_10_4_VDEV_PARAM_PROXY_STA, 5368 WMI_10_4_VDEV_PARAM_MERU_VC, 5369 WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE, 5370 WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK, 5371 WMI_10_4_VDEV_PARAM_SENSOR_AP, 5372 WMI_10_4_VDEV_PARAM_BEACON_RATE, 5373 WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS, 5374 WMI_10_4_VDEV_PARAM_STA_KICKOUT, 5375 WMI_10_4_VDEV_PARAM_CAPABILITIES, 5376 WMI_10_4_VDEV_PARAM_TSF_INCREMENT, 5377 WMI_10_4_VDEV_PARAM_RX_FILTER, 5378 WMI_10_4_VDEV_PARAM_MGMT_TX_POWER, 5379 WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY, 5380 WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS, 5381 WMI_10_4_VDEV_PARAM_TSF_DECREMENT, 5382 }; 5383 5384 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0) 5385 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1) 5386 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2) 5387 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3) 5388 5389 #define WMI_TXBF_STS_CAP_OFFSET_LSB 4 5390 #define WMI_TXBF_STS_CAP_OFFSET_MASK 0x70 5391 #define WMI_TXBF_CONF_IMPLICIT_BF BIT(7) 5392 #define WMI_BF_SOUND_DIM_OFFSET_LSB 8 5393 #define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00 5394 5395 /* slot time long */ 5396 #define WMI_VDEV_SLOT_TIME_LONG 0x1 5397 /* slot time short */ 5398 #define WMI_VDEV_SLOT_TIME_SHORT 0x2 5399 /* preablbe long */ 5400 #define WMI_VDEV_PREAMBLE_LONG 0x1 5401 /* preablbe short */ 5402 #define WMI_VDEV_PREAMBLE_SHORT 0x2 5403 5404 enum wmi_start_event_param { 5405 WMI_VDEV_RESP_START_EVENT = 0, 5406 WMI_VDEV_RESP_RESTART_EVENT, 5407 }; 5408 5409 struct wmi_vdev_start_response_event { 5410 __le32 vdev_id; 5411 __le32 req_id; 5412 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 5413 __le32 status; 5414 } __packed; 5415 5416 struct wmi_vdev_standby_req_event { 5417 /* unique id identifying the VDEV, generated by the caller */ 5418 __le32 vdev_id; 5419 } __packed; 5420 5421 struct wmi_vdev_resume_req_event { 5422 /* unique id identifying the VDEV, generated by the caller */ 5423 __le32 vdev_id; 5424 } __packed; 5425 5426 struct wmi_vdev_stopped_event { 5427 /* unique id identifying the VDEV, generated by the caller */ 5428 __le32 vdev_id; 5429 } __packed; 5430 5431 /* 5432 * common structure used for simple events 5433 * (stopped, resume_req, standby response) 5434 */ 5435 struct wmi_vdev_simple_event { 5436 /* unique id identifying the VDEV, generated by the caller */ 5437 __le32 vdev_id; 5438 } __packed; 5439 5440 /* VDEV start response status codes */ 5441 /* VDEV successfully started */ 5442 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 5443 5444 /* requested VDEV not found */ 5445 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1 5446 5447 /* unsupported VDEV combination */ 5448 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2 5449 5450 /* TODO: please add more comments if you have in-depth information */ 5451 struct wmi_vdev_spectral_conf_cmd { 5452 __le32 vdev_id; 5453 5454 /* number of fft samples to send (0 for infinite) */ 5455 __le32 scan_count; 5456 __le32 scan_period; 5457 __le32 scan_priority; 5458 5459 /* number of bins in the FFT: 2^(fft_size - bin_scale) */ 5460 __le32 scan_fft_size; 5461 __le32 scan_gc_ena; 5462 __le32 scan_restart_ena; 5463 __le32 scan_noise_floor_ref; 5464 __le32 scan_init_delay; 5465 __le32 scan_nb_tone_thr; 5466 __le32 scan_str_bin_thr; 5467 __le32 scan_wb_rpt_mode; 5468 __le32 scan_rssi_rpt_mode; 5469 __le32 scan_rssi_thr; 5470 __le32 scan_pwr_format; 5471 5472 /* rpt_mode: Format of FFT report to software for spectral scan 5473 * triggered FFTs: 5474 * 0: No FFT report (only spectral scan summary report) 5475 * 1: 2-dword summary of metrics for each completed FFT + spectral 5476 * scan summary report 5477 * 2: 2-dword summary of metrics for each completed FFT + 5478 * 1x- oversampled bins(in-band) per FFT + spectral scan summary 5479 * report 5480 * 3: 2-dword summary of metrics for each completed FFT + 5481 * 2x- oversampled bins (all) per FFT + spectral scan summary 5482 */ 5483 __le32 scan_rpt_mode; 5484 __le32 scan_bin_scale; 5485 __le32 scan_dbm_adj; 5486 __le32 scan_chn_mask; 5487 } __packed; 5488 5489 struct wmi_vdev_spectral_conf_arg { 5490 u32 vdev_id; 5491 u32 scan_count; 5492 u32 scan_period; 5493 u32 scan_priority; 5494 u32 scan_fft_size; 5495 u32 scan_gc_ena; 5496 u32 scan_restart_ena; 5497 u32 scan_noise_floor_ref; 5498 u32 scan_init_delay; 5499 u32 scan_nb_tone_thr; 5500 u32 scan_str_bin_thr; 5501 u32 scan_wb_rpt_mode; 5502 u32 scan_rssi_rpt_mode; 5503 u32 scan_rssi_thr; 5504 u32 scan_pwr_format; 5505 u32 scan_rpt_mode; 5506 u32 scan_bin_scale; 5507 u32 scan_dbm_adj; 5508 u32 scan_chn_mask; 5509 }; 5510 5511 #define WMI_SPECTRAL_ENABLE_DEFAULT 0 5512 #define WMI_SPECTRAL_COUNT_DEFAULT 0 5513 #define WMI_SPECTRAL_PERIOD_DEFAULT 35 5514 #define WMI_SPECTRAL_PRIORITY_DEFAULT 1 5515 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7 5516 #define WMI_SPECTRAL_GC_ENA_DEFAULT 1 5517 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0 5518 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96 5519 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80 5520 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12 5521 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8 5522 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0 5523 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0 5524 #define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0 5525 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0 5526 #define WMI_SPECTRAL_RPT_MODE_DEFAULT 2 5527 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1 5528 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1 5529 #define WMI_SPECTRAL_CHN_MASK_DEFAULT 1 5530 5531 struct wmi_vdev_spectral_enable_cmd { 5532 __le32 vdev_id; 5533 __le32 trigger_cmd; 5534 __le32 enable_cmd; 5535 } __packed; 5536 5537 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1 5538 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2 5539 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1 5540 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2 5541 5542 /* Beacon processing related command and event structures */ 5543 struct wmi_bcn_tx_hdr { 5544 __le32 vdev_id; 5545 __le32 tx_rate; 5546 __le32 tx_power; 5547 __le32 bcn_len; 5548 } __packed; 5549 5550 struct wmi_bcn_tx_cmd { 5551 struct wmi_bcn_tx_hdr hdr; 5552 u8 *bcn[0]; 5553 } __packed; 5554 5555 struct wmi_bcn_tx_arg { 5556 u32 vdev_id; 5557 u32 tx_rate; 5558 u32 tx_power; 5559 u32 bcn_len; 5560 const void *bcn; 5561 }; 5562 5563 enum wmi_bcn_tx_ref_flags { 5564 WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1, 5565 WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2, 5566 }; 5567 5568 /* TODO: It is unclear why "no antenna" works while any other seemingly valid 5569 * chainmask yields no beacons on the air at all. 5570 */ 5571 #define WMI_BCN_TX_REF_DEF_ANTENNA 0 5572 5573 struct wmi_bcn_tx_ref_cmd { 5574 __le32 vdev_id; 5575 __le32 data_len; 5576 /* physical address of the frame - dma pointer */ 5577 __le32 data_ptr; 5578 /* id for host to track */ 5579 __le32 msdu_id; 5580 /* frame ctrl to setup PPDU desc */ 5581 __le32 frame_control; 5582 /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */ 5583 __le32 flags; 5584 /* introduced in 10.2 */ 5585 __le32 antenna_mask; 5586 } __packed; 5587 5588 /* Beacon filter */ 5589 #define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */ 5590 #define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */ 5591 #define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */ 5592 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */ 5593 #define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */ 5594 5595 struct wmi_bcn_filter_rx_cmd { 5596 /* Filter ID */ 5597 __le32 bcn_filter_id; 5598 /* Filter type - wmi_bcn_filter */ 5599 __le32 bcn_filter; 5600 /* Buffer len */ 5601 __le32 bcn_filter_len; 5602 /* Filter info (threshold, BSSID, RSSI) */ 5603 u8 *bcn_filter_buf; 5604 } __packed; 5605 5606 /* Capabilities and IEs to be passed to firmware */ 5607 struct wmi_bcn_prb_info { 5608 /* Capabilities */ 5609 __le32 caps; 5610 /* ERP info */ 5611 __le32 erp; 5612 /* Advanced capabilities */ 5613 /* HT capabilities */ 5614 /* HT Info */ 5615 /* ibss_dfs */ 5616 /* wpa Info */ 5617 /* rsn Info */ 5618 /* rrm info */ 5619 /* ath_ext */ 5620 /* app IE */ 5621 } __packed; 5622 5623 struct wmi_bcn_tmpl_cmd { 5624 /* unique id identifying the VDEV, generated by the caller */ 5625 __le32 vdev_id; 5626 /* TIM IE offset from the beginning of the template. */ 5627 __le32 tim_ie_offset; 5628 /* beacon probe capabilities and IEs */ 5629 struct wmi_bcn_prb_info bcn_prb_info; 5630 /* beacon buffer length */ 5631 __le32 buf_len; 5632 /* variable length data */ 5633 u8 data[1]; 5634 } __packed; 5635 5636 struct wmi_prb_tmpl_cmd { 5637 /* unique id identifying the VDEV, generated by the caller */ 5638 __le32 vdev_id; 5639 /* beacon probe capabilities and IEs */ 5640 struct wmi_bcn_prb_info bcn_prb_info; 5641 /* beacon buffer length */ 5642 __le32 buf_len; 5643 /* Variable length data */ 5644 u8 data[1]; 5645 } __packed; 5646 5647 enum wmi_sta_ps_mode { 5648 /* enable power save for the given STA VDEV */ 5649 WMI_STA_PS_MODE_DISABLED = 0, 5650 /* disable power save for a given STA VDEV */ 5651 WMI_STA_PS_MODE_ENABLED = 1, 5652 }; 5653 5654 struct wmi_sta_powersave_mode_cmd { 5655 /* unique id identifying the VDEV, generated by the caller */ 5656 __le32 vdev_id; 5657 5658 /* 5659 * Power save mode 5660 * (see enum wmi_sta_ps_mode) 5661 */ 5662 __le32 sta_ps_mode; 5663 } __packed; 5664 5665 enum wmi_csa_offload_en { 5666 WMI_CSA_OFFLOAD_DISABLE = 0, 5667 WMI_CSA_OFFLOAD_ENABLE = 1, 5668 }; 5669 5670 struct wmi_csa_offload_enable_cmd { 5671 __le32 vdev_id; 5672 __le32 csa_offload_enable; 5673 } __packed; 5674 5675 struct wmi_csa_offload_chanswitch_cmd { 5676 __le32 vdev_id; 5677 struct wmi_channel chan; 5678 } __packed; 5679 5680 /* 5681 * This parameter controls the policy for retrieving frames from AP while the 5682 * STA is in sleep state. 5683 * 5684 * Only takes affect if the sta_ps_mode is enabled 5685 */ 5686 enum wmi_sta_ps_param_rx_wake_policy { 5687 /* 5688 * Wake up when ever there is an RX activity on the VDEV. In this mode 5689 * the Power save SM(state machine) will come out of sleep by either 5690 * sending null frame (or) a data frame (with PS==0) in response to TIM 5691 * bit set in the received beacon frame from AP. 5692 */ 5693 WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0, 5694 5695 /* 5696 * Here the power save state machine will not wakeup in response to TIM 5697 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD 5698 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all 5699 * access categories are delivery-enabled, the station will send a 5700 * UAPSD trigger frame, otherwise it will send a PS-Poll. 5701 */ 5702 WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, 5703 }; 5704 5705 /* 5706 * Number of tx frames/beacon that cause the power save SM to wake up. 5707 * 5708 * Value 1 causes the SM to wake up for every TX. Value 0 has a special 5709 * meaning, It will cause the SM to never wake up. This is useful if you want 5710 * to keep the system to sleep all the time for some kind of test mode . host 5711 * can change this parameter any time. It will affect at the next tx frame. 5712 */ 5713 enum wmi_sta_ps_param_tx_wake_threshold { 5714 WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, 5715 WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, 5716 5717 /* 5718 * Values greater than one indicate that many TX attempts per beacon 5719 * interval before the STA will wake up 5720 */ 5721 }; 5722 5723 /* 5724 * The maximum number of PS-Poll frames the FW will send in response to 5725 * traffic advertised in TIM before waking up (by sending a null frame with PS 5726 * = 0). Value 0 has a special meaning: there is no maximum count and the FW 5727 * will send as many PS-Poll as are necessary to retrieve buffered BU. This 5728 * parameter is used when the RX wake policy is 5729 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake 5730 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE. 5731 */ 5732 enum wmi_sta_ps_param_pspoll_count { 5733 WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0, 5734 /* 5735 * Values greater than 0 indicate the maximum numer of PS-Poll frames 5736 * FW will send before waking up. 5737 */ 5738 5739 /* When u-APSD is enabled the firmware will be very reluctant to exit 5740 * STA PS. This could result in very poor Rx performance with STA doing 5741 * PS-Poll for each and every buffered frame. This value is a bit 5742 * arbitrary. 5743 */ 5744 WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3, 5745 }; 5746 5747 /* 5748 * This will include the delivery and trigger enabled state for every AC. 5749 * This is the negotiated state with AP. The host MLME needs to set this based 5750 * on AP capability and the state Set in the association request by the 5751 * station MLME.Lower 8 bits of the value specify the UAPSD configuration. 5752 */ 5753 #define WMI_UAPSD_AC_TYPE_DELI 0 5754 #define WMI_UAPSD_AC_TYPE_TRIG 1 5755 5756 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \ 5757 (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1)) 5758 5759 enum wmi_sta_ps_param_uapsd { 5760 WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5761 WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5762 WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5763 WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5764 WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5765 WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5766 WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5767 WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5768 }; 5769 5770 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX 5771 5772 struct wmi_sta_uapsd_auto_trig_param { 5773 __le32 wmm_ac; 5774 __le32 user_priority; 5775 __le32 service_interval; 5776 __le32 suspend_interval; 5777 __le32 delay_interval; 5778 }; 5779 5780 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param { 5781 __le32 vdev_id; 5782 struct wmi_mac_addr peer_macaddr; 5783 __le32 num_ac; 5784 }; 5785 5786 struct wmi_sta_uapsd_auto_trig_arg { 5787 u32 wmm_ac; 5788 u32 user_priority; 5789 u32 service_interval; 5790 u32 suspend_interval; 5791 u32 delay_interval; 5792 }; 5793 5794 enum wmi_sta_powersave_param { 5795 /* 5796 * Controls how frames are retrievd from AP while STA is sleeping 5797 * 5798 * (see enum wmi_sta_ps_param_rx_wake_policy) 5799 */ 5800 WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0, 5801 5802 /* 5803 * The STA will go active after this many TX 5804 * 5805 * (see enum wmi_sta_ps_param_tx_wake_threshold) 5806 */ 5807 WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, 5808 5809 /* 5810 * Number of PS-Poll to send before STA wakes up 5811 * 5812 * (see enum wmi_sta_ps_param_pspoll_count) 5813 * 5814 */ 5815 WMI_STA_PS_PARAM_PSPOLL_COUNT = 2, 5816 5817 /* 5818 * TX/RX inactivity time in msec before going to sleep. 5819 * 5820 * The power save SM will monitor tx/rx activity on the VDEV, if no 5821 * activity for the specified msec of the parameter the Power save 5822 * SM will go to sleep. 5823 */ 5824 WMI_STA_PS_PARAM_INACTIVITY_TIME = 3, 5825 5826 /* 5827 * Set uapsd configuration. 5828 * 5829 * (see enum wmi_sta_ps_param_uapsd) 5830 */ 5831 WMI_STA_PS_PARAM_UAPSD = 4, 5832 }; 5833 5834 struct wmi_sta_powersave_param_cmd { 5835 __le32 vdev_id; 5836 __le32 param_id; /* %WMI_STA_PS_PARAM_ */ 5837 __le32 param_value; 5838 } __packed; 5839 5840 /* No MIMO power save */ 5841 #define WMI_STA_MIMO_PS_MODE_DISABLE 5842 /* mimo powersave mode static*/ 5843 #define WMI_STA_MIMO_PS_MODE_STATIC 5844 /* mimo powersave mode dynamic */ 5845 #define WMI_STA_MIMO_PS_MODE_DYNAMIC 5846 5847 struct wmi_sta_mimo_ps_mode_cmd { 5848 /* unique id identifying the VDEV, generated by the caller */ 5849 __le32 vdev_id; 5850 /* mimo powersave mode as defined above */ 5851 __le32 mimo_pwrsave_mode; 5852 } __packed; 5853 5854 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */ 5855 enum wmi_ap_ps_param_uapsd { 5856 WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5857 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5858 WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5859 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5860 WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5861 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5862 WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5863 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5864 }; 5865 5866 /* U-APSD maximum service period of peer station */ 5867 enum wmi_ap_ps_peer_param_max_sp { 5868 WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, 5869 WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1, 5870 WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2, 5871 WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3, 5872 MAX_WMI_AP_PS_PEER_PARAM_MAX_SP, 5873 }; 5874 5875 /* 5876 * AP power save parameter 5877 * Set a power save specific parameter for a peer station 5878 */ 5879 enum wmi_ap_ps_peer_param { 5880 /* Set uapsd configuration for a given peer. 5881 * 5882 * Include the delivery and trigger enabled state for every AC. 5883 * The host MLME needs to set this based on AP capability and stations 5884 * request Set in the association request received from the station. 5885 * 5886 * Lower 8 bits of the value specify the UAPSD configuration. 5887 * 5888 * (see enum wmi_ap_ps_param_uapsd) 5889 * The default value is 0. 5890 */ 5891 WMI_AP_PS_PEER_PARAM_UAPSD = 0, 5892 5893 /* 5894 * Set the service period for a UAPSD capable station 5895 * 5896 * The service period from wme ie in the (re)assoc request frame. 5897 * 5898 * (see enum wmi_ap_ps_peer_param_max_sp) 5899 */ 5900 WMI_AP_PS_PEER_PARAM_MAX_SP = 1, 5901 5902 /* Time in seconds for aging out buffered frames for STA in PS */ 5903 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, 5904 }; 5905 5906 struct wmi_ap_ps_peer_cmd { 5907 /* unique id identifying the VDEV, generated by the caller */ 5908 __le32 vdev_id; 5909 5910 /* peer MAC address */ 5911 struct wmi_mac_addr peer_macaddr; 5912 5913 /* AP powersave param (see enum wmi_ap_ps_peer_param) */ 5914 __le32 param_id; 5915 5916 /* AP powersave param value */ 5917 __le32 param_value; 5918 } __packed; 5919 5920 /* 128 clients = 4 words */ 5921 #define WMI_TIM_BITMAP_ARRAY_SIZE 4 5922 5923 struct wmi_tim_info { 5924 __le32 tim_len; 5925 __le32 tim_mcast; 5926 __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE]; 5927 __le32 tim_changed; 5928 __le32 tim_num_ps_pending; 5929 } __packed; 5930 5931 struct wmi_tim_info_arg { 5932 __le32 tim_len; 5933 __le32 tim_mcast; 5934 const __le32 *tim_bitmap; 5935 __le32 tim_changed; 5936 __le32 tim_num_ps_pending; 5937 } __packed; 5938 5939 /* Maximum number of NOA Descriptors supported */ 5940 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4 5941 #define WMI_P2P_OPPPS_ENABLE_BIT BIT(0) 5942 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1 5943 #define WMI_P2P_NOA_CHANGED_BIT BIT(0) 5944 5945 struct wmi_p2p_noa_info { 5946 /* Bit 0 - Flag to indicate an update in NOA schedule 5947 * Bits 7-1 - Reserved 5948 */ 5949 u8 changed; 5950 /* NOA index */ 5951 u8 index; 5952 /* Bit 0 - Opp PS state of the AP 5953 * Bits 1-7 - Ctwindow in TUs 5954 */ 5955 u8 ctwindow_oppps; 5956 /* Number of NOA descriptors */ 5957 u8 num_descriptors; 5958 5959 struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS]; 5960 } __packed; 5961 5962 struct wmi_bcn_info { 5963 struct wmi_tim_info tim_info; 5964 struct wmi_p2p_noa_info p2p_noa_info; 5965 } __packed; 5966 5967 struct wmi_host_swba_event { 5968 __le32 vdev_map; 5969 struct wmi_bcn_info bcn_info[0]; 5970 } __packed; 5971 5972 struct wmi_10_2_4_bcn_info { 5973 struct wmi_tim_info tim_info; 5974 /* The 10.2.4 FW doesn't have p2p NOA info */ 5975 } __packed; 5976 5977 struct wmi_10_2_4_host_swba_event { 5978 __le32 vdev_map; 5979 struct wmi_10_2_4_bcn_info bcn_info[0]; 5980 } __packed; 5981 5982 /* 16 words = 512 client + 1 word = for guard */ 5983 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17 5984 5985 struct wmi_10_4_tim_info { 5986 __le32 tim_len; 5987 __le32 tim_mcast; 5988 __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE]; 5989 __le32 tim_changed; 5990 __le32 tim_num_ps_pending; 5991 } __packed; 5992 5993 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1 5994 5995 struct wmi_10_4_p2p_noa_info { 5996 /* Bit 0 - Flag to indicate an update in NOA schedule 5997 * Bits 7-1 - Reserved 5998 */ 5999 u8 changed; 6000 /* NOA index */ 6001 u8 index; 6002 /* Bit 0 - Opp PS state of the AP 6003 * Bits 1-7 - Ctwindow in TUs 6004 */ 6005 u8 ctwindow_oppps; 6006 /* Number of NOA descriptors */ 6007 u8 num_descriptors; 6008 6009 struct wmi_p2p_noa_descriptor 6010 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS]; 6011 } __packed; 6012 6013 struct wmi_10_4_bcn_info { 6014 struct wmi_10_4_tim_info tim_info; 6015 struct wmi_10_4_p2p_noa_info p2p_noa_info; 6016 } __packed; 6017 6018 struct wmi_10_4_host_swba_event { 6019 __le32 vdev_map; 6020 struct wmi_10_4_bcn_info bcn_info[0]; 6021 } __packed; 6022 6023 #define WMI_MAX_AP_VDEV 16 6024 6025 struct wmi_tbtt_offset_event { 6026 __le32 vdev_map; 6027 __le32 tbttoffset_list[WMI_MAX_AP_VDEV]; 6028 } __packed; 6029 6030 struct wmi_peer_create_cmd { 6031 __le32 vdev_id; 6032 struct wmi_mac_addr peer_macaddr; 6033 __le32 peer_type; 6034 } __packed; 6035 6036 enum wmi_peer_type { 6037 WMI_PEER_TYPE_DEFAULT = 0, 6038 WMI_PEER_TYPE_BSS = 1, 6039 WMI_PEER_TYPE_TDLS = 2, 6040 }; 6041 6042 struct wmi_peer_delete_cmd { 6043 __le32 vdev_id; 6044 struct wmi_mac_addr peer_macaddr; 6045 } __packed; 6046 6047 struct wmi_peer_flush_tids_cmd { 6048 __le32 vdev_id; 6049 struct wmi_mac_addr peer_macaddr; 6050 __le32 peer_tid_bitmap; 6051 } __packed; 6052 6053 struct wmi_fixed_rate { 6054 /* 6055 * rate mode . 0: disable fixed rate (auto rate) 6056 * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps 6057 * 2: ht20 11n rate specified as mcs index 6058 * 3: ht40 11n rate specified as mcs index 6059 */ 6060 __le32 rate_mode; 6061 /* 6062 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB) 6063 * and series 3 is stored at byte 3 (MSB) 6064 */ 6065 __le32 rate_series; 6066 /* 6067 * 4 retry counts for 4 rate series. retry count for rate 0 is stored 6068 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3 6069 * (MSB) 6070 */ 6071 __le32 rate_retries; 6072 } __packed; 6073 6074 struct wmi_peer_fixed_rate_cmd { 6075 /* unique id identifying the VDEV, generated by the caller */ 6076 __le32 vdev_id; 6077 /* peer MAC address */ 6078 struct wmi_mac_addr peer_macaddr; 6079 /* fixed rate */ 6080 struct wmi_fixed_rate peer_fixed_rate; 6081 } __packed; 6082 6083 #define WMI_MGMT_TID 17 6084 6085 struct wmi_addba_clear_resp_cmd { 6086 /* unique id identifying the VDEV, generated by the caller */ 6087 __le32 vdev_id; 6088 /* peer MAC address */ 6089 struct wmi_mac_addr peer_macaddr; 6090 } __packed; 6091 6092 struct wmi_addba_send_cmd { 6093 /* unique id identifying the VDEV, generated by the caller */ 6094 __le32 vdev_id; 6095 /* peer MAC address */ 6096 struct wmi_mac_addr peer_macaddr; 6097 /* Tid number */ 6098 __le32 tid; 6099 /* Buffer/Window size*/ 6100 __le32 buffersize; 6101 } __packed; 6102 6103 struct wmi_delba_send_cmd { 6104 /* unique id identifying the VDEV, generated by the caller */ 6105 __le32 vdev_id; 6106 /* peer MAC address */ 6107 struct wmi_mac_addr peer_macaddr; 6108 /* Tid number */ 6109 __le32 tid; 6110 /* Is Initiator */ 6111 __le32 initiator; 6112 /* Reason code */ 6113 __le32 reasoncode; 6114 } __packed; 6115 6116 struct wmi_addba_setresponse_cmd { 6117 /* unique id identifying the vdev, generated by the caller */ 6118 __le32 vdev_id; 6119 /* peer mac address */ 6120 struct wmi_mac_addr peer_macaddr; 6121 /* Tid number */ 6122 __le32 tid; 6123 /* status code */ 6124 __le32 statuscode; 6125 } __packed; 6126 6127 struct wmi_send_singleamsdu_cmd { 6128 /* unique id identifying the vdev, generated by the caller */ 6129 __le32 vdev_id; 6130 /* peer mac address */ 6131 struct wmi_mac_addr peer_macaddr; 6132 /* Tid number */ 6133 __le32 tid; 6134 } __packed; 6135 6136 enum wmi_peer_smps_state { 6137 WMI_PEER_SMPS_PS_NONE = 0x0, 6138 WMI_PEER_SMPS_STATIC = 0x1, 6139 WMI_PEER_SMPS_DYNAMIC = 0x2 6140 }; 6141 6142 enum wmi_peer_chwidth { 6143 WMI_PEER_CHWIDTH_20MHZ = 0, 6144 WMI_PEER_CHWIDTH_40MHZ = 1, 6145 WMI_PEER_CHWIDTH_80MHZ = 2, 6146 WMI_PEER_CHWIDTH_160MHZ = 3, 6147 }; 6148 6149 enum wmi_peer_param { 6150 WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */ 6151 WMI_PEER_AMPDU = 0x2, 6152 WMI_PEER_AUTHORIZE = 0x3, 6153 WMI_PEER_CHAN_WIDTH = 0x4, 6154 WMI_PEER_NSS = 0x5, 6155 WMI_PEER_USE_4ADDR = 0x6, 6156 WMI_PEER_DEBUG = 0xa, 6157 WMI_PEER_PHYMODE = 0xd, 6158 WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */ 6159 }; 6160 6161 struct wmi_peer_set_param_cmd { 6162 __le32 vdev_id; 6163 struct wmi_mac_addr peer_macaddr; 6164 __le32 param_id; 6165 __le32 param_value; 6166 } __packed; 6167 6168 #define MAX_SUPPORTED_RATES 128 6169 6170 struct wmi_rate_set { 6171 /* total number of rates */ 6172 __le32 num_rates; 6173 /* 6174 * rates (each 8bit value) packed into a 32 bit word. 6175 * the rates are filled from least significant byte to most 6176 * significant byte. 6177 */ 6178 __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1]; 6179 } __packed; 6180 6181 struct wmi_rate_set_arg { 6182 unsigned int num_rates; 6183 u8 rates[MAX_SUPPORTED_RATES]; 6184 }; 6185 6186 /* 6187 * NOTE: It would bea good idea to represent the Tx MCS 6188 * info in one word and Rx in another word. This is split 6189 * into multiple words for convenience 6190 */ 6191 struct wmi_vht_rate_set { 6192 __le32 rx_max_rate; /* Max Rx data rate */ 6193 __le32 rx_mcs_set; /* Negotiated RX VHT rates */ 6194 __le32 tx_max_rate; /* Max Tx data rate */ 6195 __le32 tx_mcs_set; /* Negotiated TX VHT rates */ 6196 } __packed; 6197 6198 struct wmi_vht_rate_set_arg { 6199 u32 rx_max_rate; 6200 u32 rx_mcs_set; 6201 u32 tx_max_rate; 6202 u32 tx_mcs_set; 6203 }; 6204 6205 struct wmi_peer_set_rates_cmd { 6206 /* peer MAC address */ 6207 struct wmi_mac_addr peer_macaddr; 6208 /* legacy rate set */ 6209 struct wmi_rate_set peer_legacy_rates; 6210 /* ht rate set */ 6211 struct wmi_rate_set peer_ht_rates; 6212 } __packed; 6213 6214 struct wmi_peer_set_q_empty_callback_cmd { 6215 /* unique id identifying the VDEV, generated by the caller */ 6216 __le32 vdev_id; 6217 /* peer MAC address */ 6218 struct wmi_mac_addr peer_macaddr; 6219 __le32 callback_enable; 6220 } __packed; 6221 6222 struct wmi_peer_flags_map { 6223 u32 auth; 6224 u32 qos; 6225 u32 need_ptk_4_way; 6226 u32 need_gtk_2_way; 6227 u32 apsd; 6228 u32 ht; 6229 u32 bw40; 6230 u32 stbc; 6231 u32 ldbc; 6232 u32 dyn_mimops; 6233 u32 static_mimops; 6234 u32 spatial_mux; 6235 u32 vht; 6236 u32 bw80; 6237 u32 vht_2g; 6238 u32 pmf; 6239 u32 bw160; 6240 }; 6241 6242 enum wmi_peer_flags { 6243 WMI_PEER_AUTH = 0x00000001, 6244 WMI_PEER_QOS = 0x00000002, 6245 WMI_PEER_NEED_PTK_4_WAY = 0x00000004, 6246 WMI_PEER_NEED_GTK_2_WAY = 0x00000010, 6247 WMI_PEER_APSD = 0x00000800, 6248 WMI_PEER_HT = 0x00001000, 6249 WMI_PEER_40MHZ = 0x00002000, 6250 WMI_PEER_STBC = 0x00008000, 6251 WMI_PEER_LDPC = 0x00010000, 6252 WMI_PEER_DYN_MIMOPS = 0x00020000, 6253 WMI_PEER_STATIC_MIMOPS = 0x00040000, 6254 WMI_PEER_SPATIAL_MUX = 0x00200000, 6255 WMI_PEER_VHT = 0x02000000, 6256 WMI_PEER_80MHZ = 0x04000000, 6257 WMI_PEER_VHT_2G = 0x08000000, 6258 WMI_PEER_PMF = 0x10000000, 6259 WMI_PEER_160MHZ = 0x20000000 6260 }; 6261 6262 enum wmi_10x_peer_flags { 6263 WMI_10X_PEER_AUTH = 0x00000001, 6264 WMI_10X_PEER_QOS = 0x00000002, 6265 WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004, 6266 WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010, 6267 WMI_10X_PEER_APSD = 0x00000800, 6268 WMI_10X_PEER_HT = 0x00001000, 6269 WMI_10X_PEER_40MHZ = 0x00002000, 6270 WMI_10X_PEER_STBC = 0x00008000, 6271 WMI_10X_PEER_LDPC = 0x00010000, 6272 WMI_10X_PEER_DYN_MIMOPS = 0x00020000, 6273 WMI_10X_PEER_STATIC_MIMOPS = 0x00040000, 6274 WMI_10X_PEER_SPATIAL_MUX = 0x00200000, 6275 WMI_10X_PEER_VHT = 0x02000000, 6276 WMI_10X_PEER_80MHZ = 0x04000000, 6277 WMI_10X_PEER_160MHZ = 0x20000000 6278 }; 6279 6280 enum wmi_10_2_peer_flags { 6281 WMI_10_2_PEER_AUTH = 0x00000001, 6282 WMI_10_2_PEER_QOS = 0x00000002, 6283 WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004, 6284 WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010, 6285 WMI_10_2_PEER_APSD = 0x00000800, 6286 WMI_10_2_PEER_HT = 0x00001000, 6287 WMI_10_2_PEER_40MHZ = 0x00002000, 6288 WMI_10_2_PEER_STBC = 0x00008000, 6289 WMI_10_2_PEER_LDPC = 0x00010000, 6290 WMI_10_2_PEER_DYN_MIMOPS = 0x00020000, 6291 WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000, 6292 WMI_10_2_PEER_SPATIAL_MUX = 0x00200000, 6293 WMI_10_2_PEER_VHT = 0x02000000, 6294 WMI_10_2_PEER_80MHZ = 0x04000000, 6295 WMI_10_2_PEER_VHT_2G = 0x08000000, 6296 WMI_10_2_PEER_PMF = 0x10000000, 6297 WMI_10_2_PEER_160MHZ = 0x20000000 6298 }; 6299 6300 /* 6301 * Peer rate capabilities. 6302 * 6303 * This is of interest to the ratecontrol 6304 * module which resides in the firmware. The bit definitions are 6305 * consistent with that defined in if_athrate.c. 6306 */ 6307 #define WMI_RC_DS_FLAG 0x01 6308 #define WMI_RC_CW40_FLAG 0x02 6309 #define WMI_RC_SGI_FLAG 0x04 6310 #define WMI_RC_HT_FLAG 0x08 6311 #define WMI_RC_RTSCTS_FLAG 0x10 6312 #define WMI_RC_TX_STBC_FLAG 0x20 6313 #define WMI_RC_RX_STBC_FLAG 0xC0 6314 #define WMI_RC_RX_STBC_FLAG_S 6 6315 #define WMI_RC_WEP_TKIP_FLAG 0x100 6316 #define WMI_RC_TS_FLAG 0x200 6317 #define WMI_RC_UAPSD_FLAG 0x400 6318 6319 /* Maximum listen interval supported by hw in units of beacon interval */ 6320 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5 6321 6322 struct wmi_common_peer_assoc_complete_cmd { 6323 struct wmi_mac_addr peer_macaddr; 6324 __le32 vdev_id; 6325 __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */ 6326 __le32 peer_associd; /* 16 LSBs */ 6327 __le32 peer_flags; 6328 __le32 peer_caps; /* 16 LSBs */ 6329 __le32 peer_listen_intval; 6330 __le32 peer_ht_caps; 6331 __le32 peer_max_mpdu; 6332 __le32 peer_mpdu_density; /* 0..16 */ 6333 __le32 peer_rate_caps; 6334 struct wmi_rate_set peer_legacy_rates; 6335 struct wmi_rate_set peer_ht_rates; 6336 __le32 peer_nss; /* num of spatial streams */ 6337 __le32 peer_vht_caps; 6338 __le32 peer_phymode; 6339 struct wmi_vht_rate_set peer_vht_rates; 6340 }; 6341 6342 struct wmi_main_peer_assoc_complete_cmd { 6343 struct wmi_common_peer_assoc_complete_cmd cmd; 6344 6345 /* HT Operation Element of the peer. Five bytes packed in 2 6346 * INT32 array and filled from lsb to msb. 6347 */ 6348 __le32 peer_ht_info[2]; 6349 } __packed; 6350 6351 struct wmi_10_1_peer_assoc_complete_cmd { 6352 struct wmi_common_peer_assoc_complete_cmd cmd; 6353 } __packed; 6354 6355 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0 6356 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f 6357 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4 6358 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0 6359 6360 struct wmi_10_2_peer_assoc_complete_cmd { 6361 struct wmi_common_peer_assoc_complete_cmd cmd; 6362 __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */ 6363 } __packed; 6364 6365 #define PEER_BW_RXNSS_OVERRIDE_OFFSET 31 6366 6367 struct wmi_10_4_peer_assoc_complete_cmd { 6368 struct wmi_10_2_peer_assoc_complete_cmd cmd; 6369 __le32 peer_bw_rxnss_override; 6370 } __packed; 6371 6372 struct wmi_peer_assoc_complete_arg { 6373 u8 addr[ETH_ALEN]; 6374 u32 vdev_id; 6375 bool peer_reassoc; 6376 u16 peer_aid; 6377 u32 peer_flags; /* see %WMI_PEER_ */ 6378 u16 peer_caps; 6379 u32 peer_listen_intval; 6380 u32 peer_ht_caps; 6381 u32 peer_max_mpdu; 6382 u32 peer_mpdu_density; /* 0..16 */ 6383 u32 peer_rate_caps; /* see %WMI_RC_ */ 6384 struct wmi_rate_set_arg peer_legacy_rates; 6385 struct wmi_rate_set_arg peer_ht_rates; 6386 u32 peer_num_spatial_streams; 6387 u32 peer_vht_caps; 6388 enum wmi_phy_mode peer_phymode; 6389 struct wmi_vht_rate_set_arg peer_vht_rates; 6390 u32 peer_bw_rxnss_override; 6391 }; 6392 6393 struct wmi_peer_add_wds_entry_cmd { 6394 /* peer MAC address */ 6395 struct wmi_mac_addr peer_macaddr; 6396 /* wds MAC addr */ 6397 struct wmi_mac_addr wds_macaddr; 6398 } __packed; 6399 6400 struct wmi_peer_remove_wds_entry_cmd { 6401 /* wds MAC addr */ 6402 struct wmi_mac_addr wds_macaddr; 6403 } __packed; 6404 6405 struct wmi_peer_q_empty_callback_event { 6406 /* peer MAC address */ 6407 struct wmi_mac_addr peer_macaddr; 6408 } __packed; 6409 6410 /* 6411 * Channel info WMI event 6412 */ 6413 struct wmi_chan_info_event { 6414 __le32 err_code; 6415 __le32 freq; 6416 __le32 cmd_flags; 6417 __le32 noise_floor; 6418 __le32 rx_clear_count; 6419 __le32 cycle_count; 6420 } __packed; 6421 6422 struct wmi_10_4_chan_info_event { 6423 __le32 err_code; 6424 __le32 freq; 6425 __le32 cmd_flags; 6426 __le32 noise_floor; 6427 __le32 rx_clear_count; 6428 __le32 cycle_count; 6429 __le32 chan_tx_pwr_range; 6430 __le32 chan_tx_pwr_tp; 6431 __le32 rx_frame_count; 6432 } __packed; 6433 6434 struct wmi_peer_sta_kickout_event { 6435 struct wmi_mac_addr peer_macaddr; 6436 } __packed; 6437 6438 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0) 6439 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1) 6440 6441 /* Beacon filter wmi command info */ 6442 #define BCN_FLT_MAX_SUPPORTED_IES 256 6443 #define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32) 6444 6445 struct bss_bcn_stats { 6446 __le32 vdev_id; 6447 __le32 bss_bcnsdropped; 6448 __le32 bss_bcnsdelivered; 6449 } __packed; 6450 6451 struct bcn_filter_stats { 6452 __le32 bcns_dropped; 6453 __le32 bcns_delivered; 6454 __le32 activefilters; 6455 struct bss_bcn_stats bss_stats; 6456 } __packed; 6457 6458 struct wmi_add_bcn_filter_cmd { 6459 u32 vdev_id; 6460 u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST]; 6461 } __packed; 6462 6463 enum wmi_sta_keepalive_method { 6464 WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1, 6465 WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2, 6466 }; 6467 6468 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0 6469 6470 /* Firmware crashes if keepalive interval exceeds this limit */ 6471 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff 6472 6473 /* note: ip4 addresses are in network byte order, i.e. big endian */ 6474 struct wmi_sta_keepalive_arp_resp { 6475 __be32 src_ip4_addr; 6476 __be32 dest_ip4_addr; 6477 struct wmi_mac_addr dest_mac_addr; 6478 } __packed; 6479 6480 struct wmi_sta_keepalive_cmd { 6481 __le32 vdev_id; 6482 __le32 enabled; 6483 __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */ 6484 __le32 interval; /* in seconds */ 6485 struct wmi_sta_keepalive_arp_resp arp_resp; 6486 } __packed; 6487 6488 struct wmi_sta_keepalive_arg { 6489 u32 vdev_id; 6490 u32 enabled; 6491 u32 method; 6492 u32 interval; 6493 __be32 src_ip4_addr; 6494 __be32 dest_ip4_addr; 6495 const u8 dest_mac_addr[ETH_ALEN]; 6496 }; 6497 6498 enum wmi_force_fw_hang_type { 6499 WMI_FORCE_FW_HANG_ASSERT = 1, 6500 WMI_FORCE_FW_HANG_NO_DETECT, 6501 WMI_FORCE_FW_HANG_CTRL_EP_FULL, 6502 WMI_FORCE_FW_HANG_EMPTY_POINT, 6503 WMI_FORCE_FW_HANG_STACK_OVERFLOW, 6504 WMI_FORCE_FW_HANG_INFINITE_LOOP, 6505 }; 6506 6507 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF 6508 6509 struct wmi_force_fw_hang_cmd { 6510 __le32 type; 6511 __le32 delay_ms; 6512 } __packed; 6513 6514 enum wmi_pdev_reset_mode_type { 6515 WMI_RST_MODE_TX_FLUSH = 1, 6516 WMI_RST_MODE_WARM_RESET, 6517 WMI_RST_MODE_COLD_RESET, 6518 WMI_RST_MODE_WARM_RESET_RESTORE_CAL, 6519 WMI_RST_MODE_COLD_RESET_RESTORE_CAL, 6520 WMI_RST_MODE_MAX, 6521 }; 6522 6523 enum ath10k_dbglog_level { 6524 ATH10K_DBGLOG_LEVEL_VERBOSE = 0, 6525 ATH10K_DBGLOG_LEVEL_INFO = 1, 6526 ATH10K_DBGLOG_LEVEL_WARN = 2, 6527 ATH10K_DBGLOG_LEVEL_ERR = 3, 6528 }; 6529 6530 /* VAP ids to enable dbglog */ 6531 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0 6532 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff 6533 6534 /* to enable dbglog in the firmware */ 6535 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16 6536 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000 6537 6538 /* timestamp resolution */ 6539 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17 6540 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000 6541 6542 /* number of queued messages before sending them to the host */ 6543 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20 6544 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000 6545 6546 /* 6547 * Log levels to enable. This defines the minimum level to enable, this is 6548 * not a bitmask. See enum ath10k_dbglog_level for the values. 6549 */ 6550 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28 6551 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000 6552 6553 /* 6554 * Note: this is a cleaned up version of a struct firmware uses. For 6555 * example, config_valid was hidden inside an array. 6556 */ 6557 struct wmi_dbglog_cfg_cmd { 6558 /* bitmask to hold mod id config*/ 6559 __le32 module_enable; 6560 6561 /* see ATH10K_DBGLOG_CFG_ */ 6562 __le32 config_enable; 6563 6564 /* mask of module id bits to be changed */ 6565 __le32 module_valid; 6566 6567 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6568 __le32 config_valid; 6569 } __packed; 6570 6571 struct wmi_10_4_dbglog_cfg_cmd { 6572 /* bitmask to hold mod id config*/ 6573 __le64 module_enable; 6574 6575 /* see ATH10K_DBGLOG_CFG_ */ 6576 __le32 config_enable; 6577 6578 /* mask of module id bits to be changed */ 6579 __le64 module_valid; 6580 6581 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6582 __le32 config_valid; 6583 } __packed; 6584 6585 enum wmi_roam_reason { 6586 WMI_ROAM_REASON_BETTER_AP = 1, 6587 WMI_ROAM_REASON_BEACON_MISS = 2, 6588 WMI_ROAM_REASON_LOW_RSSI = 3, 6589 WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4, 6590 WMI_ROAM_REASON_HO_FAILED = 5, 6591 6592 /* keep last */ 6593 WMI_ROAM_REASON_MAX, 6594 }; 6595 6596 struct wmi_roam_ev { 6597 __le32 vdev_id; 6598 __le32 reason; 6599 } __packed; 6600 6601 #define ATH10K_FRAGMT_THRESHOLD_MIN 540 6602 #define ATH10K_FRAGMT_THRESHOLD_MAX 2346 6603 6604 #define WMI_MAX_EVENT 0x1000 6605 /* Maximum number of pending TXed WMI packets */ 6606 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr) 6607 6608 /* By default disable power save for IBSS */ 6609 #define ATH10K_DEFAULT_ATIM 0 6610 6611 #define WMI_MAX_MEM_REQS 16 6612 6613 struct wmi_scan_ev_arg { 6614 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 6615 __le32 reason; /* %WMI_SCAN_REASON_ */ 6616 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 6617 __le32 scan_req_id; 6618 __le32 scan_id; 6619 __le32 vdev_id; 6620 }; 6621 6622 struct wmi_tlv_mgmt_tx_compl_ev_arg { 6623 __le32 desc_id; 6624 __le32 status; 6625 __le32 pdev_id; 6626 }; 6627 6628 struct wmi_mgmt_rx_ev_arg { 6629 __le32 channel; 6630 __le32 snr; 6631 __le32 rate; 6632 __le32 phy_mode; 6633 __le32 buf_len; 6634 __le32 status; /* %WMI_RX_STATUS_ */ 6635 struct wmi_mgmt_rx_ext_info ext_info; 6636 }; 6637 6638 struct wmi_ch_info_ev_arg { 6639 __le32 err_code; 6640 __le32 freq; 6641 __le32 cmd_flags; 6642 __le32 noise_floor; 6643 __le32 rx_clear_count; 6644 __le32 cycle_count; 6645 __le32 chan_tx_pwr_range; 6646 __le32 chan_tx_pwr_tp; 6647 __le32 rx_frame_count; 6648 }; 6649 6650 struct wmi_vdev_start_ev_arg { 6651 __le32 vdev_id; 6652 __le32 req_id; 6653 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 6654 __le32 status; 6655 }; 6656 6657 struct wmi_peer_kick_ev_arg { 6658 const u8 *mac_addr; 6659 }; 6660 6661 struct wmi_swba_ev_arg { 6662 __le32 vdev_map; 6663 struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV]; 6664 const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV]; 6665 }; 6666 6667 struct wmi_phyerr_ev_arg { 6668 u32 tsf_timestamp; 6669 u16 freq1; 6670 u16 freq2; 6671 u8 rssi_combined; 6672 u8 chan_width_mhz; 6673 u8 phy_err_code; 6674 u16 nf_chains[4]; 6675 u32 buf_len; 6676 const u8 *buf; 6677 u8 hdr_len; 6678 }; 6679 6680 struct wmi_phyerr_hdr_arg { 6681 u32 num_phyerrs; 6682 u32 tsf_l32; 6683 u32 tsf_u32; 6684 u32 buf_len; 6685 const void *phyerrs; 6686 }; 6687 6688 struct wmi_dfs_status_ev_arg { 6689 u32 status; 6690 }; 6691 6692 struct wmi_svc_rdy_ev_arg { 6693 __le32 min_tx_power; 6694 __le32 max_tx_power; 6695 __le32 ht_cap; 6696 __le32 vht_cap; 6697 __le32 sw_ver0; 6698 __le32 sw_ver1; 6699 __le32 fw_build; 6700 __le32 phy_capab; 6701 __le32 num_rf_chains; 6702 __le32 eeprom_rd; 6703 __le32 num_mem_reqs; 6704 __le32 low_5ghz_chan; 6705 __le32 high_5ghz_chan; 6706 const __le32 *service_map; 6707 size_t service_map_len; 6708 const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS]; 6709 }; 6710 6711 struct wmi_svc_avail_ev_arg { 6712 __le32 service_map_ext_len; 6713 const __le32 *service_map_ext; 6714 }; 6715 6716 struct wmi_rdy_ev_arg { 6717 __le32 sw_version; 6718 __le32 abi_version; 6719 __le32 status; 6720 const u8 *mac_addr; 6721 }; 6722 6723 struct wmi_roam_ev_arg { 6724 __le32 vdev_id; 6725 __le32 reason; 6726 __le32 rssi; 6727 }; 6728 6729 struct wmi_echo_ev_arg { 6730 __le32 value; 6731 }; 6732 6733 struct wmi_pdev_temperature_event { 6734 /* temperature value in Celcius degree */ 6735 __le32 temperature; 6736 } __packed; 6737 6738 struct wmi_pdev_bss_chan_info_event { 6739 __le32 freq; 6740 __le32 noise_floor; 6741 __le64 cycle_busy; 6742 __le64 cycle_total; 6743 __le64 cycle_tx; 6744 __le64 cycle_rx; 6745 __le64 cycle_rx_bss; 6746 __le32 reserved; 6747 } __packed; 6748 6749 /* WOW structures */ 6750 enum wmi_wow_wakeup_event { 6751 WOW_BMISS_EVENT = 0, 6752 WOW_BETTER_AP_EVENT, 6753 WOW_DEAUTH_RECVD_EVENT, 6754 WOW_MAGIC_PKT_RECVD_EVENT, 6755 WOW_GTK_ERR_EVENT, 6756 WOW_FOURWAY_HSHAKE_EVENT, 6757 WOW_EAPOL_RECVD_EVENT, 6758 WOW_NLO_DETECTED_EVENT, 6759 WOW_DISASSOC_RECVD_EVENT, 6760 WOW_PATTERN_MATCH_EVENT, 6761 WOW_CSA_IE_EVENT, 6762 WOW_PROBE_REQ_WPS_IE_EVENT, 6763 WOW_AUTH_REQ_EVENT, 6764 WOW_ASSOC_REQ_EVENT, 6765 WOW_HTT_EVENT, 6766 WOW_RA_MATCH_EVENT, 6767 WOW_HOST_AUTO_SHUTDOWN_EVENT, 6768 WOW_IOAC_MAGIC_EVENT, 6769 WOW_IOAC_SHORT_EVENT, 6770 WOW_IOAC_EXTEND_EVENT, 6771 WOW_IOAC_TIMER_EVENT, 6772 WOW_DFS_PHYERR_RADAR_EVENT, 6773 WOW_BEACON_EVENT, 6774 WOW_CLIENT_KICKOUT_EVENT, 6775 WOW_EVENT_MAX, 6776 }; 6777 6778 #define C2S(x) case x: return #x 6779 6780 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev) 6781 { 6782 switch (ev) { 6783 C2S(WOW_BMISS_EVENT); 6784 C2S(WOW_BETTER_AP_EVENT); 6785 C2S(WOW_DEAUTH_RECVD_EVENT); 6786 C2S(WOW_MAGIC_PKT_RECVD_EVENT); 6787 C2S(WOW_GTK_ERR_EVENT); 6788 C2S(WOW_FOURWAY_HSHAKE_EVENT); 6789 C2S(WOW_EAPOL_RECVD_EVENT); 6790 C2S(WOW_NLO_DETECTED_EVENT); 6791 C2S(WOW_DISASSOC_RECVD_EVENT); 6792 C2S(WOW_PATTERN_MATCH_EVENT); 6793 C2S(WOW_CSA_IE_EVENT); 6794 C2S(WOW_PROBE_REQ_WPS_IE_EVENT); 6795 C2S(WOW_AUTH_REQ_EVENT); 6796 C2S(WOW_ASSOC_REQ_EVENT); 6797 C2S(WOW_HTT_EVENT); 6798 C2S(WOW_RA_MATCH_EVENT); 6799 C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT); 6800 C2S(WOW_IOAC_MAGIC_EVENT); 6801 C2S(WOW_IOAC_SHORT_EVENT); 6802 C2S(WOW_IOAC_EXTEND_EVENT); 6803 C2S(WOW_IOAC_TIMER_EVENT); 6804 C2S(WOW_DFS_PHYERR_RADAR_EVENT); 6805 C2S(WOW_BEACON_EVENT); 6806 C2S(WOW_CLIENT_KICKOUT_EVENT); 6807 C2S(WOW_EVENT_MAX); 6808 default: 6809 return NULL; 6810 } 6811 } 6812 6813 enum wmi_wow_wake_reason { 6814 WOW_REASON_UNSPECIFIED = -1, 6815 WOW_REASON_NLOD = 0, 6816 WOW_REASON_AP_ASSOC_LOST, 6817 WOW_REASON_LOW_RSSI, 6818 WOW_REASON_DEAUTH_RECVD, 6819 WOW_REASON_DISASSOC_RECVD, 6820 WOW_REASON_GTK_HS_ERR, 6821 WOW_REASON_EAP_REQ, 6822 WOW_REASON_FOURWAY_HS_RECV, 6823 WOW_REASON_TIMER_INTR_RECV, 6824 WOW_REASON_PATTERN_MATCH_FOUND, 6825 WOW_REASON_RECV_MAGIC_PATTERN, 6826 WOW_REASON_P2P_DISC, 6827 WOW_REASON_WLAN_HB, 6828 WOW_REASON_CSA_EVENT, 6829 WOW_REASON_PROBE_REQ_WPS_IE_RECV, 6830 WOW_REASON_AUTH_REQ_RECV, 6831 WOW_REASON_ASSOC_REQ_RECV, 6832 WOW_REASON_HTT_EVENT, 6833 WOW_REASON_RA_MATCH, 6834 WOW_REASON_HOST_AUTO_SHUTDOWN, 6835 WOW_REASON_IOAC_MAGIC_EVENT, 6836 WOW_REASON_IOAC_SHORT_EVENT, 6837 WOW_REASON_IOAC_EXTEND_EVENT, 6838 WOW_REASON_IOAC_TIMER_EVENT, 6839 WOW_REASON_ROAM_HO, 6840 WOW_REASON_DFS_PHYERR_RADADR_EVENT, 6841 WOW_REASON_BEACON_RECV, 6842 WOW_REASON_CLIENT_KICKOUT_EVENT, 6843 WOW_REASON_DEBUG_TEST = 0xFF, 6844 }; 6845 6846 static inline const char *wow_reason(enum wmi_wow_wake_reason reason) 6847 { 6848 switch (reason) { 6849 C2S(WOW_REASON_UNSPECIFIED); 6850 C2S(WOW_REASON_NLOD); 6851 C2S(WOW_REASON_AP_ASSOC_LOST); 6852 C2S(WOW_REASON_LOW_RSSI); 6853 C2S(WOW_REASON_DEAUTH_RECVD); 6854 C2S(WOW_REASON_DISASSOC_RECVD); 6855 C2S(WOW_REASON_GTK_HS_ERR); 6856 C2S(WOW_REASON_EAP_REQ); 6857 C2S(WOW_REASON_FOURWAY_HS_RECV); 6858 C2S(WOW_REASON_TIMER_INTR_RECV); 6859 C2S(WOW_REASON_PATTERN_MATCH_FOUND); 6860 C2S(WOW_REASON_RECV_MAGIC_PATTERN); 6861 C2S(WOW_REASON_P2P_DISC); 6862 C2S(WOW_REASON_WLAN_HB); 6863 C2S(WOW_REASON_CSA_EVENT); 6864 C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV); 6865 C2S(WOW_REASON_AUTH_REQ_RECV); 6866 C2S(WOW_REASON_ASSOC_REQ_RECV); 6867 C2S(WOW_REASON_HTT_EVENT); 6868 C2S(WOW_REASON_RA_MATCH); 6869 C2S(WOW_REASON_HOST_AUTO_SHUTDOWN); 6870 C2S(WOW_REASON_IOAC_MAGIC_EVENT); 6871 C2S(WOW_REASON_IOAC_SHORT_EVENT); 6872 C2S(WOW_REASON_IOAC_EXTEND_EVENT); 6873 C2S(WOW_REASON_IOAC_TIMER_EVENT); 6874 C2S(WOW_REASON_ROAM_HO); 6875 C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT); 6876 C2S(WOW_REASON_BEACON_RECV); 6877 C2S(WOW_REASON_CLIENT_KICKOUT_EVENT); 6878 C2S(WOW_REASON_DEBUG_TEST); 6879 default: 6880 return NULL; 6881 } 6882 } 6883 6884 #undef C2S 6885 6886 struct wmi_wow_ev_arg { 6887 u32 vdev_id; 6888 u32 flag; 6889 enum wmi_wow_wake_reason wake_reason; 6890 u32 data_len; 6891 }; 6892 6893 #define WOW_MIN_PATTERN_SIZE 1 6894 #define WOW_MAX_PATTERN_SIZE 148 6895 #define WOW_MAX_PKT_OFFSET 128 6896 #define WOW_HDR_LEN (sizeof(struct ieee80211_hdr_3addr) + \ 6897 sizeof(struct rfc1042_hdr)) 6898 #define WOW_MAX_REDUCE (WOW_HDR_LEN - sizeof(struct ethhdr) - \ 6899 offsetof(struct ieee80211_hdr_3addr, addr1)) 6900 6901 enum wmi_tdls_state { 6902 WMI_TDLS_DISABLE, 6903 WMI_TDLS_ENABLE_PASSIVE, 6904 WMI_TDLS_ENABLE_ACTIVE, 6905 WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL, 6906 }; 6907 6908 enum wmi_tdls_peer_state { 6909 WMI_TDLS_PEER_STATE_PEERING, 6910 WMI_TDLS_PEER_STATE_CONNECTED, 6911 WMI_TDLS_PEER_STATE_TEARDOWN, 6912 }; 6913 6914 struct wmi_tdls_peer_update_cmd_arg { 6915 u32 vdev_id; 6916 enum wmi_tdls_peer_state peer_state; 6917 u8 addr[ETH_ALEN]; 6918 }; 6919 6920 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32 6921 6922 #define WMI_TDLS_PEER_SP_MASK 0x60 6923 #define WMI_TDLS_PEER_SP_LSB 5 6924 6925 enum wmi_tdls_options { 6926 WMI_TDLS_OFFCHAN_EN = BIT(0), 6927 WMI_TDLS_BUFFER_STA_EN = BIT(1), 6928 WMI_TDLS_SLEEP_STA_EN = BIT(2), 6929 }; 6930 6931 enum { 6932 WMI_TDLS_PEER_QOS_AC_VO = BIT(0), 6933 WMI_TDLS_PEER_QOS_AC_VI = BIT(1), 6934 WMI_TDLS_PEER_QOS_AC_BK = BIT(2), 6935 WMI_TDLS_PEER_QOS_AC_BE = BIT(3), 6936 }; 6937 6938 struct wmi_tdls_peer_capab_arg { 6939 u8 peer_uapsd_queues; 6940 u8 peer_max_sp; 6941 u32 buff_sta_support; 6942 u32 off_chan_support; 6943 u32 peer_curr_operclass; 6944 u32 self_curr_operclass; 6945 u32 peer_chan_len; 6946 u32 peer_operclass_len; 6947 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 6948 u32 is_peer_responder; 6949 u32 pref_offchan_num; 6950 u32 pref_offchan_bw; 6951 }; 6952 6953 struct wmi_10_4_tdls_set_state_cmd { 6954 __le32 vdev_id; 6955 __le32 state; 6956 __le32 notification_interval_ms; 6957 __le32 tx_discovery_threshold; 6958 __le32 tx_teardown_threshold; 6959 __le32 rssi_teardown_threshold; 6960 __le32 rssi_delta; 6961 __le32 tdls_options; 6962 __le32 tdls_peer_traffic_ind_window; 6963 __le32 tdls_peer_traffic_response_timeout_ms; 6964 __le32 tdls_puapsd_mask; 6965 __le32 tdls_puapsd_inactivity_time_ms; 6966 __le32 tdls_puapsd_rx_frame_threshold; 6967 __le32 teardown_notification_ms; 6968 __le32 tdls_peer_kickout_threshold; 6969 } __packed; 6970 6971 struct wmi_tdls_peer_capabilities { 6972 __le32 peer_qos; 6973 __le32 buff_sta_support; 6974 __le32 off_chan_support; 6975 __le32 peer_curr_operclass; 6976 __le32 self_curr_operclass; 6977 __le32 peer_chan_len; 6978 __le32 peer_operclass_len; 6979 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 6980 __le32 is_peer_responder; 6981 __le32 pref_offchan_num; 6982 __le32 pref_offchan_bw; 6983 struct wmi_channel peer_chan_list[1]; 6984 } __packed; 6985 6986 struct wmi_10_4_tdls_peer_update_cmd { 6987 __le32 vdev_id; 6988 struct wmi_mac_addr peer_macaddr; 6989 __le32 peer_state; 6990 __le32 reserved[4]; 6991 struct wmi_tdls_peer_capabilities peer_capab; 6992 } __packed; 6993 6994 enum wmi_tdls_peer_reason { 6995 WMI_TDLS_TEARDOWN_REASON_TX, 6996 WMI_TDLS_TEARDOWN_REASON_RSSI, 6997 WMI_TDLS_TEARDOWN_REASON_SCAN, 6998 WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE, 6999 WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT, 7000 WMI_TDLS_TEARDOWN_REASON_BAD_PTR, 7001 WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE, 7002 WMI_TDLS_ENTER_BUF_STA, 7003 WMI_TDLS_EXIT_BUF_STA, 7004 WMI_TDLS_ENTER_BT_BUSY_MODE, 7005 WMI_TDLS_EXIT_BT_BUSY_MODE, 7006 WMI_TDLS_SCAN_STARTED_EVENT, 7007 WMI_TDLS_SCAN_COMPLETED_EVENT, 7008 }; 7009 7010 enum wmi_tdls_peer_notification { 7011 WMI_TDLS_SHOULD_DISCOVER, 7012 WMI_TDLS_SHOULD_TEARDOWN, 7013 WMI_TDLS_PEER_DISCONNECTED, 7014 WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION, 7015 }; 7016 7017 struct wmi_tdls_peer_event { 7018 struct wmi_mac_addr peer_macaddr; 7019 /* see enum wmi_tdls_peer_notification*/ 7020 __le32 peer_status; 7021 /* see enum wmi_tdls_peer_reason */ 7022 __le32 peer_reason; 7023 __le32 vdev_id; 7024 } __packed; 7025 7026 enum wmi_txbf_conf { 7027 WMI_TXBF_CONF_UNSUPPORTED, 7028 WMI_TXBF_CONF_BEFORE_ASSOC, 7029 WMI_TXBF_CONF_AFTER_ASSOC, 7030 }; 7031 7032 #define WMI_CCA_DETECT_LEVEL_AUTO 0 7033 #define WMI_CCA_DETECT_MARGIN_AUTO 0 7034 7035 struct wmi_pdev_set_adaptive_cca_params { 7036 __le32 enable; 7037 __le32 cca_detect_level; 7038 __le32 cca_detect_margin; 7039 } __packed; 7040 7041 enum wmi_host_platform_type { 7042 WMI_HOST_PLATFORM_HIGH_PERF, 7043 WMI_HOST_PLATFORM_LOW_PERF, 7044 }; 7045 7046 enum wmi_bss_survey_req_type { 7047 WMI_BSS_SURVEY_REQ_TYPE_READ = 1, 7048 WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR, 7049 }; 7050 7051 struct wmi_pdev_chan_info_req_cmd { 7052 __le32 type; 7053 __le32 reserved; 7054 } __packed; 7055 7056 struct ath10k; 7057 struct ath10k_vif; 7058 struct ath10k_fw_stats_pdev; 7059 struct ath10k_fw_stats_peer; 7060 struct ath10k_fw_stats; 7061 7062 int ath10k_wmi_attach(struct ath10k *ar); 7063 void ath10k_wmi_detach(struct ath10k *ar); 7064 void ath10k_wmi_free_host_mem(struct ath10k *ar); 7065 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar); 7066 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar); 7067 7068 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 7069 int ath10k_wmi_connect(struct ath10k *ar); 7070 7071 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 7072 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); 7073 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb, 7074 u32 cmd_id); 7075 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg); 7076 7077 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src, 7078 struct ath10k_fw_stats_pdev *dst); 7079 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src, 7080 struct ath10k_fw_stats_pdev *dst); 7081 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src, 7082 struct ath10k_fw_stats_pdev *dst); 7083 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src, 7084 struct ath10k_fw_stats_pdev *dst); 7085 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src, 7086 struct ath10k_fw_stats_peer *dst); 7087 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar, 7088 struct wmi_host_mem_chunks *chunks); 7089 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn, 7090 const struct wmi_start_scan_arg *arg); 7091 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params, 7092 const struct wmi_wmm_params_arg *arg); 7093 void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch, 7094 const struct wmi_channel_arg *arg); 7095 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg); 7096 7097 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb); 7098 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb); 7099 int ath10k_wmi_event_mgmt_tx_compl(struct ath10k *ar, struct sk_buff *skb); 7100 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb); 7101 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb); 7102 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb); 7103 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb); 7104 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb); 7105 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb); 7106 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb); 7107 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb); 7108 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb); 7109 void ath10k_wmi_event_dfs(struct ath10k *ar, 7110 struct wmi_phyerr_ev_arg *phyerr, u64 tsf); 7111 void ath10k_wmi_event_spectral_scan(struct ath10k *ar, 7112 struct wmi_phyerr_ev_arg *phyerr, 7113 u64 tsf); 7114 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb); 7115 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb); 7116 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb); 7117 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb); 7118 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb); 7119 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb); 7120 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar, 7121 struct sk_buff *skb); 7122 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar, 7123 struct sk_buff *skb); 7124 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb); 7125 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb); 7126 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb); 7127 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb); 7128 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb); 7129 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar, 7130 struct sk_buff *skb); 7131 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb); 7132 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb); 7133 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb); 7134 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar, 7135 struct sk_buff *skb); 7136 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb); 7137 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb); 7138 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb); 7139 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb); 7140 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb); 7141 void ath10k_wmi_event_service_available(struct ath10k *ar, struct sk_buff *skb); 7142 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf, 7143 int left_len, struct wmi_phyerr_ev_arg *arg); 7144 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar, 7145 struct ath10k_fw_stats *fw_stats, 7146 char *buf); 7147 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar, 7148 struct ath10k_fw_stats *fw_stats, 7149 char *buf); 7150 size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head); 7151 size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head); 7152 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar, 7153 struct ath10k_fw_stats *fw_stats, 7154 char *buf); 7155 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar, 7156 enum wmi_vdev_subtype subtype); 7157 int ath10k_wmi_barrier(struct ath10k *ar); 7158 void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table, 7159 u32 num_tx_chain); 7160 void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb); 7161 7162 #endif /* _WMI_H_ */ 7163