1 /* 2 * Copyright (c) 2005-2011 Atheros Communications Inc. 3 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. 4 * Copyright (c) 2018, The Linux Foundation. All rights reserved. 5 * 6 * Permission to use, copy, modify, and/or distribute this software for any 7 * purpose with or without fee is hereby granted, provided that the above 8 * copyright notice and this permission notice appear in all copies. 9 * 10 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 11 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 12 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 13 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 14 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 15 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 16 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 17 */ 18 19 #ifndef _WMI_H_ 20 #define _WMI_H_ 21 22 #include <linux/types.h> 23 #include <net/mac80211.h> 24 25 /* 26 * This file specifies the WMI interface for the Unified Software 27 * Architecture. 28 * 29 * It includes definitions of all the commands and events. Commands are 30 * messages from the host to the target. Events and Replies are messages 31 * from the target to the host. 32 * 33 * Ownership of correctness in regards to WMI commands belongs to the host 34 * driver and the target is not required to validate parameters for value, 35 * proper range, or any other checking. 36 * 37 * Guidelines for extending this interface are below. 38 * 39 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff 40 * 41 * 2. Use ONLY u32 type for defining member variables within WMI 42 * command/event structures. Do not use u8, u16, bool or 43 * enum types within these structures. 44 * 45 * 3. DO NOT define bit fields within structures. Implement bit fields 46 * using masks if necessary. Do not use the programming language's bit 47 * field definition. 48 * 49 * 4. Define macros for encode/decode of u8, u16 fields within 50 * the u32 variables. Use these macros for set/get of these fields. 51 * Try to use this to optimize the structure without bloating it with 52 * u32 variables for every lower sized field. 53 * 54 * 5. Do not use PACK/UNPACK attributes for the structures as each member 55 * variable is already 4-byte aligned by virtue of being a u32 56 * type. 57 * 58 * 6. Comment each parameter part of the WMI command/event structure by 59 * using the 2 stars at the beginning of C comment instead of one star to 60 * enable HTML document generation using Doxygen. 61 * 62 */ 63 64 /* Control Path */ 65 struct wmi_cmd_hdr { 66 __le32 cmd_id; 67 } __packed; 68 69 #define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF 70 #define WMI_CMD_HDR_CMD_ID_LSB 0 71 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000 72 #define WMI_CMD_HDR_PLT_PRIV_LSB 24 73 74 #define HTC_PROTOCOL_VERSION 0x0002 75 #define WMI_PROTOCOL_VERSION 0x0002 76 77 /* 78 * There is no signed version of __le32, so for a temporary solution come 79 * up with our own version. The idea is from fs/ntfs/endian.h. 80 * 81 * Use a_ prefix so that it doesn't conflict if we get proper support to 82 * linux/types.h. 83 */ 84 typedef __s32 __bitwise a_sle32; 85 86 static inline a_sle32 a_cpu_to_sle32(s32 val) 87 { 88 return (__force a_sle32)cpu_to_le32(val); 89 } 90 91 static inline s32 a_sle32_to_cpu(a_sle32 val) 92 { 93 return le32_to_cpu((__force __le32)val); 94 } 95 96 enum wmi_service { 97 WMI_SERVICE_BEACON_OFFLOAD = 0, 98 WMI_SERVICE_SCAN_OFFLOAD, 99 WMI_SERVICE_ROAM_OFFLOAD, 100 WMI_SERVICE_BCN_MISS_OFFLOAD, 101 WMI_SERVICE_STA_PWRSAVE, 102 WMI_SERVICE_STA_ADVANCED_PWRSAVE, 103 WMI_SERVICE_AP_UAPSD, 104 WMI_SERVICE_AP_DFS, 105 WMI_SERVICE_11AC, 106 WMI_SERVICE_BLOCKACK, 107 WMI_SERVICE_PHYERR, 108 WMI_SERVICE_BCN_FILTER, 109 WMI_SERVICE_RTT, 110 WMI_SERVICE_RATECTRL, 111 WMI_SERVICE_WOW, 112 WMI_SERVICE_RATECTRL_CACHE, 113 WMI_SERVICE_IRAM_TIDS, 114 WMI_SERVICE_ARPNS_OFFLOAD, 115 WMI_SERVICE_NLO, 116 WMI_SERVICE_GTK_OFFLOAD, 117 WMI_SERVICE_SCAN_SCH, 118 WMI_SERVICE_CSA_OFFLOAD, 119 WMI_SERVICE_CHATTER, 120 WMI_SERVICE_COEX_FREQAVOID, 121 WMI_SERVICE_PACKET_POWER_SAVE, 122 WMI_SERVICE_FORCE_FW_HANG, 123 WMI_SERVICE_GPIO, 124 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 125 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 126 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 127 WMI_SERVICE_STA_KEEP_ALIVE, 128 WMI_SERVICE_TX_ENCAP, 129 WMI_SERVICE_BURST, 130 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, 131 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, 132 WMI_SERVICE_ROAM_SCAN_OFFLOAD, 133 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 134 WMI_SERVICE_EARLY_RX, 135 WMI_SERVICE_STA_SMPS, 136 WMI_SERVICE_FWTEST, 137 WMI_SERVICE_STA_WMMAC, 138 WMI_SERVICE_TDLS, 139 WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE, 140 WMI_SERVICE_ADAPTIVE_OCS, 141 WMI_SERVICE_BA_SSN_SUPPORT, 142 WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE, 143 WMI_SERVICE_WLAN_HB, 144 WMI_SERVICE_LTE_ANT_SHARE_SUPPORT, 145 WMI_SERVICE_BATCH_SCAN, 146 WMI_SERVICE_QPOWER, 147 WMI_SERVICE_PLMREQ, 148 WMI_SERVICE_THERMAL_MGMT, 149 WMI_SERVICE_RMC, 150 WMI_SERVICE_MHF_OFFLOAD, 151 WMI_SERVICE_COEX_SAR, 152 WMI_SERVICE_BCN_TXRATE_OVERRIDE, 153 WMI_SERVICE_NAN, 154 WMI_SERVICE_L1SS_STAT, 155 WMI_SERVICE_ESTIMATE_LINKSPEED, 156 WMI_SERVICE_OBSS_SCAN, 157 WMI_SERVICE_TDLS_OFFCHAN, 158 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, 159 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, 160 WMI_SERVICE_IBSS_PWRSAVE, 161 WMI_SERVICE_LPASS, 162 WMI_SERVICE_EXTSCAN, 163 WMI_SERVICE_D0WOW, 164 WMI_SERVICE_HSOFFLOAD, 165 WMI_SERVICE_ROAM_HO_OFFLOAD, 166 WMI_SERVICE_RX_FULL_REORDER, 167 WMI_SERVICE_DHCP_OFFLOAD, 168 WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT, 169 WMI_SERVICE_MDNS_OFFLOAD, 170 WMI_SERVICE_SAP_AUTH_OFFLOAD, 171 WMI_SERVICE_ATF, 172 WMI_SERVICE_COEX_GPIO, 173 WMI_SERVICE_ENHANCED_PROXY_STA, 174 WMI_SERVICE_TT, 175 WMI_SERVICE_PEER_CACHING, 176 WMI_SERVICE_AUX_SPECTRAL_INTF, 177 WMI_SERVICE_AUX_CHAN_LOAD_INTF, 178 WMI_SERVICE_BSS_CHANNEL_INFO_64, 179 WMI_SERVICE_EXT_RES_CFG_SUPPORT, 180 WMI_SERVICE_MESH_11S, 181 WMI_SERVICE_MESH_NON_11S, 182 WMI_SERVICE_PEER_STATS, 183 WMI_SERVICE_RESTRT_CHNL_SUPPORT, 184 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 185 WMI_SERVICE_TX_MODE_PUSH_ONLY, 186 WMI_SERVICE_TX_MODE_PUSH_PULL, 187 WMI_SERVICE_TX_MODE_DYNAMIC, 188 WMI_SERVICE_VDEV_RX_FILTER, 189 WMI_SERVICE_BTCOEX, 190 WMI_SERVICE_CHECK_CAL_VERSION, 191 WMI_SERVICE_DBGLOG_WARN2, 192 WMI_SERVICE_BTCOEX_DUTY_CYCLE, 193 WMI_SERVICE_4_WIRE_COEX_SUPPORT, 194 WMI_SERVICE_EXTENDED_NSS_SUPPORT, 195 WMI_SERVICE_PROG_GPIO_BAND_SELECT, 196 WMI_SERVICE_SMART_LOGGING_SUPPORT, 197 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 198 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 199 WMI_SERVICE_MGMT_TX_WMI, 200 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, 201 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 202 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, 203 WMI_SERVICE_TPC_STATS_FINAL, 204 205 /* keep last */ 206 WMI_SERVICE_MAX, 207 }; 208 209 enum wmi_10x_service { 210 WMI_10X_SERVICE_BEACON_OFFLOAD = 0, 211 WMI_10X_SERVICE_SCAN_OFFLOAD, 212 WMI_10X_SERVICE_ROAM_OFFLOAD, 213 WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 214 WMI_10X_SERVICE_STA_PWRSAVE, 215 WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 216 WMI_10X_SERVICE_AP_UAPSD, 217 WMI_10X_SERVICE_AP_DFS, 218 WMI_10X_SERVICE_11AC, 219 WMI_10X_SERVICE_BLOCKACK, 220 WMI_10X_SERVICE_PHYERR, 221 WMI_10X_SERVICE_BCN_FILTER, 222 WMI_10X_SERVICE_RTT, 223 WMI_10X_SERVICE_RATECTRL, 224 WMI_10X_SERVICE_WOW, 225 WMI_10X_SERVICE_RATECTRL_CACHE, 226 WMI_10X_SERVICE_IRAM_TIDS, 227 WMI_10X_SERVICE_BURST, 228 229 /* introduced in 10.2 */ 230 WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 231 WMI_10X_SERVICE_FORCE_FW_HANG, 232 WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 233 WMI_10X_SERVICE_ATF, 234 WMI_10X_SERVICE_COEX_GPIO, 235 WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 236 WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 237 WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 238 WMI_10X_SERVICE_MESH, 239 WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 240 WMI_10X_SERVICE_PEER_STATS, 241 }; 242 243 enum wmi_main_service { 244 WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0, 245 WMI_MAIN_SERVICE_SCAN_OFFLOAD, 246 WMI_MAIN_SERVICE_ROAM_OFFLOAD, 247 WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 248 WMI_MAIN_SERVICE_STA_PWRSAVE, 249 WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 250 WMI_MAIN_SERVICE_AP_UAPSD, 251 WMI_MAIN_SERVICE_AP_DFS, 252 WMI_MAIN_SERVICE_11AC, 253 WMI_MAIN_SERVICE_BLOCKACK, 254 WMI_MAIN_SERVICE_PHYERR, 255 WMI_MAIN_SERVICE_BCN_FILTER, 256 WMI_MAIN_SERVICE_RTT, 257 WMI_MAIN_SERVICE_RATECTRL, 258 WMI_MAIN_SERVICE_WOW, 259 WMI_MAIN_SERVICE_RATECTRL_CACHE, 260 WMI_MAIN_SERVICE_IRAM_TIDS, 261 WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 262 WMI_MAIN_SERVICE_NLO, 263 WMI_MAIN_SERVICE_GTK_OFFLOAD, 264 WMI_MAIN_SERVICE_SCAN_SCH, 265 WMI_MAIN_SERVICE_CSA_OFFLOAD, 266 WMI_MAIN_SERVICE_CHATTER, 267 WMI_MAIN_SERVICE_COEX_FREQAVOID, 268 WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 269 WMI_MAIN_SERVICE_FORCE_FW_HANG, 270 WMI_MAIN_SERVICE_GPIO, 271 WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 272 WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 273 WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 274 WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 275 WMI_MAIN_SERVICE_TX_ENCAP, 276 }; 277 278 enum wmi_10_4_service { 279 WMI_10_4_SERVICE_BEACON_OFFLOAD = 0, 280 WMI_10_4_SERVICE_SCAN_OFFLOAD, 281 WMI_10_4_SERVICE_ROAM_OFFLOAD, 282 WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 283 WMI_10_4_SERVICE_STA_PWRSAVE, 284 WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 285 WMI_10_4_SERVICE_AP_UAPSD, 286 WMI_10_4_SERVICE_AP_DFS, 287 WMI_10_4_SERVICE_11AC, 288 WMI_10_4_SERVICE_BLOCKACK, 289 WMI_10_4_SERVICE_PHYERR, 290 WMI_10_4_SERVICE_BCN_FILTER, 291 WMI_10_4_SERVICE_RTT, 292 WMI_10_4_SERVICE_RATECTRL, 293 WMI_10_4_SERVICE_WOW, 294 WMI_10_4_SERVICE_RATECTRL_CACHE, 295 WMI_10_4_SERVICE_IRAM_TIDS, 296 WMI_10_4_SERVICE_BURST, 297 WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 298 WMI_10_4_SERVICE_GTK_OFFLOAD, 299 WMI_10_4_SERVICE_SCAN_SCH, 300 WMI_10_4_SERVICE_CSA_OFFLOAD, 301 WMI_10_4_SERVICE_CHATTER, 302 WMI_10_4_SERVICE_COEX_FREQAVOID, 303 WMI_10_4_SERVICE_PACKET_POWER_SAVE, 304 WMI_10_4_SERVICE_FORCE_FW_HANG, 305 WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 306 WMI_10_4_SERVICE_GPIO, 307 WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 308 WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 309 WMI_10_4_SERVICE_STA_KEEP_ALIVE, 310 WMI_10_4_SERVICE_TX_ENCAP, 311 WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 312 WMI_10_4_SERVICE_EARLY_RX, 313 WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 314 WMI_10_4_SERVICE_TT, 315 WMI_10_4_SERVICE_ATF, 316 WMI_10_4_SERVICE_PEER_CACHING, 317 WMI_10_4_SERVICE_COEX_GPIO, 318 WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 319 WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 320 WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 321 WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 322 WMI_10_4_SERVICE_MESH_NON_11S, 323 WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 324 WMI_10_4_SERVICE_PEER_STATS, 325 WMI_10_4_SERVICE_MESH_11S, 326 WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 327 WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 328 WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 329 WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 330 WMI_10_4_SERVICE_VDEV_RX_FILTER, 331 WMI_10_4_SERVICE_BTCOEX, 332 WMI_10_4_SERVICE_CHECK_CAL_VERSION, 333 WMI_10_4_SERVICE_DBGLOG_WARN2, 334 WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, 335 WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, 336 WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, 337 WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, 338 WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, 339 WMI_10_4_SERVICE_TDLS, 340 WMI_10_4_SERVICE_TDLS_OFFCHAN, 341 WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, 342 WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, 343 WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 344 WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 345 WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, 346 WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 347 WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, 348 WMI_10_4_SERVICE_TPC_STATS_FINAL, 349 }; 350 351 static inline char *wmi_service_name(int service_id) 352 { 353 #define SVCSTR(x) case x: return #x 354 355 switch (service_id) { 356 SVCSTR(WMI_SERVICE_BEACON_OFFLOAD); 357 SVCSTR(WMI_SERVICE_SCAN_OFFLOAD); 358 SVCSTR(WMI_SERVICE_ROAM_OFFLOAD); 359 SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD); 360 SVCSTR(WMI_SERVICE_STA_PWRSAVE); 361 SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE); 362 SVCSTR(WMI_SERVICE_AP_UAPSD); 363 SVCSTR(WMI_SERVICE_AP_DFS); 364 SVCSTR(WMI_SERVICE_11AC); 365 SVCSTR(WMI_SERVICE_BLOCKACK); 366 SVCSTR(WMI_SERVICE_PHYERR); 367 SVCSTR(WMI_SERVICE_BCN_FILTER); 368 SVCSTR(WMI_SERVICE_RTT); 369 SVCSTR(WMI_SERVICE_RATECTRL); 370 SVCSTR(WMI_SERVICE_WOW); 371 SVCSTR(WMI_SERVICE_RATECTRL_CACHE); 372 SVCSTR(WMI_SERVICE_IRAM_TIDS); 373 SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD); 374 SVCSTR(WMI_SERVICE_NLO); 375 SVCSTR(WMI_SERVICE_GTK_OFFLOAD); 376 SVCSTR(WMI_SERVICE_SCAN_SCH); 377 SVCSTR(WMI_SERVICE_CSA_OFFLOAD); 378 SVCSTR(WMI_SERVICE_CHATTER); 379 SVCSTR(WMI_SERVICE_COEX_FREQAVOID); 380 SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE); 381 SVCSTR(WMI_SERVICE_FORCE_FW_HANG); 382 SVCSTR(WMI_SERVICE_GPIO); 383 SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM); 384 SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG); 385 SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG); 386 SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE); 387 SVCSTR(WMI_SERVICE_TX_ENCAP); 388 SVCSTR(WMI_SERVICE_BURST); 389 SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT); 390 SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT); 391 SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD); 392 SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC); 393 SVCSTR(WMI_SERVICE_EARLY_RX); 394 SVCSTR(WMI_SERVICE_STA_SMPS); 395 SVCSTR(WMI_SERVICE_FWTEST); 396 SVCSTR(WMI_SERVICE_STA_WMMAC); 397 SVCSTR(WMI_SERVICE_TDLS); 398 SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE); 399 SVCSTR(WMI_SERVICE_ADAPTIVE_OCS); 400 SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT); 401 SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE); 402 SVCSTR(WMI_SERVICE_WLAN_HB); 403 SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT); 404 SVCSTR(WMI_SERVICE_BATCH_SCAN); 405 SVCSTR(WMI_SERVICE_QPOWER); 406 SVCSTR(WMI_SERVICE_PLMREQ); 407 SVCSTR(WMI_SERVICE_THERMAL_MGMT); 408 SVCSTR(WMI_SERVICE_RMC); 409 SVCSTR(WMI_SERVICE_MHF_OFFLOAD); 410 SVCSTR(WMI_SERVICE_COEX_SAR); 411 SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE); 412 SVCSTR(WMI_SERVICE_NAN); 413 SVCSTR(WMI_SERVICE_L1SS_STAT); 414 SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED); 415 SVCSTR(WMI_SERVICE_OBSS_SCAN); 416 SVCSTR(WMI_SERVICE_TDLS_OFFCHAN); 417 SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA); 418 SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA); 419 SVCSTR(WMI_SERVICE_IBSS_PWRSAVE); 420 SVCSTR(WMI_SERVICE_LPASS); 421 SVCSTR(WMI_SERVICE_EXTSCAN); 422 SVCSTR(WMI_SERVICE_D0WOW); 423 SVCSTR(WMI_SERVICE_HSOFFLOAD); 424 SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD); 425 SVCSTR(WMI_SERVICE_RX_FULL_REORDER); 426 SVCSTR(WMI_SERVICE_DHCP_OFFLOAD); 427 SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT); 428 SVCSTR(WMI_SERVICE_MDNS_OFFLOAD); 429 SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD); 430 SVCSTR(WMI_SERVICE_ATF); 431 SVCSTR(WMI_SERVICE_COEX_GPIO); 432 SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA); 433 SVCSTR(WMI_SERVICE_TT); 434 SVCSTR(WMI_SERVICE_PEER_CACHING); 435 SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF); 436 SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF); 437 SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64); 438 SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT); 439 SVCSTR(WMI_SERVICE_MESH_11S); 440 SVCSTR(WMI_SERVICE_MESH_NON_11S); 441 SVCSTR(WMI_SERVICE_PEER_STATS); 442 SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT); 443 SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT); 444 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY); 445 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL); 446 SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC); 447 SVCSTR(WMI_SERVICE_VDEV_RX_FILTER); 448 SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION); 449 SVCSTR(WMI_SERVICE_DBGLOG_WARN2); 450 SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE); 451 SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT); 452 SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT); 453 SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT); 454 SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT); 455 SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE); 456 SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY); 457 SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH); 458 SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS); 459 SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT); 460 SVCSTR(WMI_SERVICE_TPC_STATS_FINAL); 461 default: 462 return NULL; 463 } 464 465 #undef SVCSTR 466 } 467 468 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 469 ((svc_id) < (len) && \ 470 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \ 471 BIT((svc_id) % (sizeof(u32)))) 472 473 /* This extension is required to accommodate new services, current limit 474 * for wmi_services is 64 as target is using only 4-bits of each 32-bit 475 * wmi_service word. Extending this to make use of remaining unused bits 476 * for new services. 477 */ 478 #define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 479 ((svc_id) >= (len) && \ 480 __le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \ 481 BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4)) 482 483 #define SVCMAP(x, y, len) \ 484 do { \ 485 if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \ 486 (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \ 487 __set_bit(y, out); \ 488 } while (0) 489 490 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out, 491 size_t len) 492 { 493 SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD, 494 WMI_SERVICE_BEACON_OFFLOAD, len); 495 SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD, 496 WMI_SERVICE_SCAN_OFFLOAD, len); 497 SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD, 498 WMI_SERVICE_ROAM_OFFLOAD, len); 499 SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 500 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 501 SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE, 502 WMI_SERVICE_STA_PWRSAVE, len); 503 SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 504 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 505 SVCMAP(WMI_10X_SERVICE_AP_UAPSD, 506 WMI_SERVICE_AP_UAPSD, len); 507 SVCMAP(WMI_10X_SERVICE_AP_DFS, 508 WMI_SERVICE_AP_DFS, len); 509 SVCMAP(WMI_10X_SERVICE_11AC, 510 WMI_SERVICE_11AC, len); 511 SVCMAP(WMI_10X_SERVICE_BLOCKACK, 512 WMI_SERVICE_BLOCKACK, len); 513 SVCMAP(WMI_10X_SERVICE_PHYERR, 514 WMI_SERVICE_PHYERR, len); 515 SVCMAP(WMI_10X_SERVICE_BCN_FILTER, 516 WMI_SERVICE_BCN_FILTER, len); 517 SVCMAP(WMI_10X_SERVICE_RTT, 518 WMI_SERVICE_RTT, len); 519 SVCMAP(WMI_10X_SERVICE_RATECTRL, 520 WMI_SERVICE_RATECTRL, len); 521 SVCMAP(WMI_10X_SERVICE_WOW, 522 WMI_SERVICE_WOW, len); 523 SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE, 524 WMI_SERVICE_RATECTRL_CACHE, len); 525 SVCMAP(WMI_10X_SERVICE_IRAM_TIDS, 526 WMI_SERVICE_IRAM_TIDS, len); 527 SVCMAP(WMI_10X_SERVICE_BURST, 528 WMI_SERVICE_BURST, len); 529 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 530 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 531 SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG, 532 WMI_SERVICE_FORCE_FW_HANG, len); 533 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 534 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 535 SVCMAP(WMI_10X_SERVICE_ATF, 536 WMI_SERVICE_ATF, len); 537 SVCMAP(WMI_10X_SERVICE_COEX_GPIO, 538 WMI_SERVICE_COEX_GPIO, len); 539 SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 540 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 541 SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 542 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 543 SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 544 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 545 SVCMAP(WMI_10X_SERVICE_MESH, 546 WMI_SERVICE_MESH_11S, len); 547 SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 548 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 549 SVCMAP(WMI_10X_SERVICE_PEER_STATS, 550 WMI_SERVICE_PEER_STATS, len); 551 } 552 553 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out, 554 size_t len) 555 { 556 SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD, 557 WMI_SERVICE_BEACON_OFFLOAD, len); 558 SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD, 559 WMI_SERVICE_SCAN_OFFLOAD, len); 560 SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD, 561 WMI_SERVICE_ROAM_OFFLOAD, len); 562 SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 563 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 564 SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE, 565 WMI_SERVICE_STA_PWRSAVE, len); 566 SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 567 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 568 SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD, 569 WMI_SERVICE_AP_UAPSD, len); 570 SVCMAP(WMI_MAIN_SERVICE_AP_DFS, 571 WMI_SERVICE_AP_DFS, len); 572 SVCMAP(WMI_MAIN_SERVICE_11AC, 573 WMI_SERVICE_11AC, len); 574 SVCMAP(WMI_MAIN_SERVICE_BLOCKACK, 575 WMI_SERVICE_BLOCKACK, len); 576 SVCMAP(WMI_MAIN_SERVICE_PHYERR, 577 WMI_SERVICE_PHYERR, len); 578 SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER, 579 WMI_SERVICE_BCN_FILTER, len); 580 SVCMAP(WMI_MAIN_SERVICE_RTT, 581 WMI_SERVICE_RTT, len); 582 SVCMAP(WMI_MAIN_SERVICE_RATECTRL, 583 WMI_SERVICE_RATECTRL, len); 584 SVCMAP(WMI_MAIN_SERVICE_WOW, 585 WMI_SERVICE_WOW, len); 586 SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE, 587 WMI_SERVICE_RATECTRL_CACHE, len); 588 SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS, 589 WMI_SERVICE_IRAM_TIDS, len); 590 SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 591 WMI_SERVICE_ARPNS_OFFLOAD, len); 592 SVCMAP(WMI_MAIN_SERVICE_NLO, 593 WMI_SERVICE_NLO, len); 594 SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD, 595 WMI_SERVICE_GTK_OFFLOAD, len); 596 SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH, 597 WMI_SERVICE_SCAN_SCH, len); 598 SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD, 599 WMI_SERVICE_CSA_OFFLOAD, len); 600 SVCMAP(WMI_MAIN_SERVICE_CHATTER, 601 WMI_SERVICE_CHATTER, len); 602 SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID, 603 WMI_SERVICE_COEX_FREQAVOID, len); 604 SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 605 WMI_SERVICE_PACKET_POWER_SAVE, len); 606 SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG, 607 WMI_SERVICE_FORCE_FW_HANG, len); 608 SVCMAP(WMI_MAIN_SERVICE_GPIO, 609 WMI_SERVICE_GPIO, len); 610 SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 611 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len); 612 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 613 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 614 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 615 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 616 SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 617 WMI_SERVICE_STA_KEEP_ALIVE, len); 618 SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP, 619 WMI_SERVICE_TX_ENCAP, len); 620 } 621 622 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out, 623 size_t len) 624 { 625 SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD, 626 WMI_SERVICE_BEACON_OFFLOAD, len); 627 SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD, 628 WMI_SERVICE_SCAN_OFFLOAD, len); 629 SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD, 630 WMI_SERVICE_ROAM_OFFLOAD, len); 631 SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 632 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 633 SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE, 634 WMI_SERVICE_STA_PWRSAVE, len); 635 SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 636 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 637 SVCMAP(WMI_10_4_SERVICE_AP_UAPSD, 638 WMI_SERVICE_AP_UAPSD, len); 639 SVCMAP(WMI_10_4_SERVICE_AP_DFS, 640 WMI_SERVICE_AP_DFS, len); 641 SVCMAP(WMI_10_4_SERVICE_11AC, 642 WMI_SERVICE_11AC, len); 643 SVCMAP(WMI_10_4_SERVICE_BLOCKACK, 644 WMI_SERVICE_BLOCKACK, len); 645 SVCMAP(WMI_10_4_SERVICE_PHYERR, 646 WMI_SERVICE_PHYERR, len); 647 SVCMAP(WMI_10_4_SERVICE_BCN_FILTER, 648 WMI_SERVICE_BCN_FILTER, len); 649 SVCMAP(WMI_10_4_SERVICE_RTT, 650 WMI_SERVICE_RTT, len); 651 SVCMAP(WMI_10_4_SERVICE_RATECTRL, 652 WMI_SERVICE_RATECTRL, len); 653 SVCMAP(WMI_10_4_SERVICE_WOW, 654 WMI_SERVICE_WOW, len); 655 SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE, 656 WMI_SERVICE_RATECTRL_CACHE, len); 657 SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS, 658 WMI_SERVICE_IRAM_TIDS, len); 659 SVCMAP(WMI_10_4_SERVICE_BURST, 660 WMI_SERVICE_BURST, len); 661 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 662 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 663 SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD, 664 WMI_SERVICE_GTK_OFFLOAD, len); 665 SVCMAP(WMI_10_4_SERVICE_SCAN_SCH, 666 WMI_SERVICE_SCAN_SCH, len); 667 SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD, 668 WMI_SERVICE_CSA_OFFLOAD, len); 669 SVCMAP(WMI_10_4_SERVICE_CHATTER, 670 WMI_SERVICE_CHATTER, len); 671 SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID, 672 WMI_SERVICE_COEX_FREQAVOID, len); 673 SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE, 674 WMI_SERVICE_PACKET_POWER_SAVE, len); 675 SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG, 676 WMI_SERVICE_FORCE_FW_HANG, len); 677 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 678 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 679 SVCMAP(WMI_10_4_SERVICE_GPIO, 680 WMI_SERVICE_GPIO, len); 681 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 682 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 683 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 684 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 685 SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE, 686 WMI_SERVICE_STA_KEEP_ALIVE, len); 687 SVCMAP(WMI_10_4_SERVICE_TX_ENCAP, 688 WMI_SERVICE_TX_ENCAP, len); 689 SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 690 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len); 691 SVCMAP(WMI_10_4_SERVICE_EARLY_RX, 692 WMI_SERVICE_EARLY_RX, len); 693 SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 694 WMI_SERVICE_ENHANCED_PROXY_STA, len); 695 SVCMAP(WMI_10_4_SERVICE_TT, 696 WMI_SERVICE_TT, len); 697 SVCMAP(WMI_10_4_SERVICE_ATF, 698 WMI_SERVICE_ATF, len); 699 SVCMAP(WMI_10_4_SERVICE_PEER_CACHING, 700 WMI_SERVICE_PEER_CACHING, len); 701 SVCMAP(WMI_10_4_SERVICE_COEX_GPIO, 702 WMI_SERVICE_COEX_GPIO, len); 703 SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 704 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 705 SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 706 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 707 SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 708 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 709 SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 710 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 711 SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S, 712 WMI_SERVICE_MESH_NON_11S, len); 713 SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 714 WMI_SERVICE_RESTRT_CHNL_SUPPORT, len); 715 SVCMAP(WMI_10_4_SERVICE_PEER_STATS, 716 WMI_SERVICE_PEER_STATS, len); 717 SVCMAP(WMI_10_4_SERVICE_MESH_11S, 718 WMI_SERVICE_MESH_11S, len); 719 SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 720 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len); 721 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 722 WMI_SERVICE_TX_MODE_PUSH_ONLY, len); 723 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 724 WMI_SERVICE_TX_MODE_PUSH_PULL, len); 725 SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 726 WMI_SERVICE_TX_MODE_DYNAMIC, len); 727 SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER, 728 WMI_SERVICE_VDEV_RX_FILTER, len); 729 SVCMAP(WMI_10_4_SERVICE_BTCOEX, 730 WMI_SERVICE_BTCOEX, len); 731 SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION, 732 WMI_SERVICE_CHECK_CAL_VERSION, len); 733 SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2, 734 WMI_SERVICE_DBGLOG_WARN2, len); 735 SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, 736 WMI_SERVICE_BTCOEX_DUTY_CYCLE, len); 737 SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, 738 WMI_SERVICE_4_WIRE_COEX_SUPPORT, len); 739 SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, 740 WMI_SERVICE_EXTENDED_NSS_SUPPORT, len); 741 SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, 742 WMI_SERVICE_PROG_GPIO_BAND_SELECT, len); 743 SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, 744 WMI_SERVICE_SMART_LOGGING_SUPPORT, len); 745 SVCMAP(WMI_10_4_SERVICE_TDLS, 746 WMI_SERVICE_TDLS, len); 747 SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN, 748 WMI_SERVICE_TDLS_OFFCHAN, len); 749 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, 750 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len); 751 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, 752 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len); 753 SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 754 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len); 755 SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 756 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len); 757 SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, 758 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len); 759 SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 760 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len); 761 SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, 762 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len); 763 SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL, 764 WMI_SERVICE_TPC_STATS_FINAL, len); 765 } 766 767 #undef SVCMAP 768 769 /* 2 word representation of MAC addr */ 770 struct wmi_mac_addr { 771 union { 772 u8 addr[6]; 773 struct { 774 u32 word0; 775 u32 word1; 776 } __packed; 777 } __packed; 778 } __packed; 779 780 struct wmi_cmd_map { 781 u32 init_cmdid; 782 u32 start_scan_cmdid; 783 u32 stop_scan_cmdid; 784 u32 scan_chan_list_cmdid; 785 u32 scan_sch_prio_tbl_cmdid; 786 u32 pdev_set_regdomain_cmdid; 787 u32 pdev_set_channel_cmdid; 788 u32 pdev_set_param_cmdid; 789 u32 pdev_pktlog_enable_cmdid; 790 u32 pdev_pktlog_disable_cmdid; 791 u32 pdev_set_wmm_params_cmdid; 792 u32 pdev_set_ht_cap_ie_cmdid; 793 u32 pdev_set_vht_cap_ie_cmdid; 794 u32 pdev_set_dscp_tid_map_cmdid; 795 u32 pdev_set_quiet_mode_cmdid; 796 u32 pdev_green_ap_ps_enable_cmdid; 797 u32 pdev_get_tpc_config_cmdid; 798 u32 pdev_set_base_macaddr_cmdid; 799 u32 vdev_create_cmdid; 800 u32 vdev_delete_cmdid; 801 u32 vdev_start_request_cmdid; 802 u32 vdev_restart_request_cmdid; 803 u32 vdev_up_cmdid; 804 u32 vdev_stop_cmdid; 805 u32 vdev_down_cmdid; 806 u32 vdev_set_param_cmdid; 807 u32 vdev_install_key_cmdid; 808 u32 peer_create_cmdid; 809 u32 peer_delete_cmdid; 810 u32 peer_flush_tids_cmdid; 811 u32 peer_set_param_cmdid; 812 u32 peer_assoc_cmdid; 813 u32 peer_add_wds_entry_cmdid; 814 u32 peer_remove_wds_entry_cmdid; 815 u32 peer_mcast_group_cmdid; 816 u32 bcn_tx_cmdid; 817 u32 pdev_send_bcn_cmdid; 818 u32 bcn_tmpl_cmdid; 819 u32 bcn_filter_rx_cmdid; 820 u32 prb_req_filter_rx_cmdid; 821 u32 mgmt_tx_cmdid; 822 u32 mgmt_tx_send_cmdid; 823 u32 prb_tmpl_cmdid; 824 u32 addba_clear_resp_cmdid; 825 u32 addba_send_cmdid; 826 u32 addba_status_cmdid; 827 u32 delba_send_cmdid; 828 u32 addba_set_resp_cmdid; 829 u32 send_singleamsdu_cmdid; 830 u32 sta_powersave_mode_cmdid; 831 u32 sta_powersave_param_cmdid; 832 u32 sta_mimo_ps_mode_cmdid; 833 u32 pdev_dfs_enable_cmdid; 834 u32 pdev_dfs_disable_cmdid; 835 u32 roam_scan_mode; 836 u32 roam_scan_rssi_threshold; 837 u32 roam_scan_period; 838 u32 roam_scan_rssi_change_threshold; 839 u32 roam_ap_profile; 840 u32 ofl_scan_add_ap_profile; 841 u32 ofl_scan_remove_ap_profile; 842 u32 ofl_scan_period; 843 u32 p2p_dev_set_device_info; 844 u32 p2p_dev_set_discoverability; 845 u32 p2p_go_set_beacon_ie; 846 u32 p2p_go_set_probe_resp_ie; 847 u32 p2p_set_vendor_ie_data_cmdid; 848 u32 ap_ps_peer_param_cmdid; 849 u32 ap_ps_peer_uapsd_coex_cmdid; 850 u32 peer_rate_retry_sched_cmdid; 851 u32 wlan_profile_trigger_cmdid; 852 u32 wlan_profile_set_hist_intvl_cmdid; 853 u32 wlan_profile_get_profile_data_cmdid; 854 u32 wlan_profile_enable_profile_id_cmdid; 855 u32 wlan_profile_list_profile_id_cmdid; 856 u32 pdev_suspend_cmdid; 857 u32 pdev_resume_cmdid; 858 u32 add_bcn_filter_cmdid; 859 u32 rmv_bcn_filter_cmdid; 860 u32 wow_add_wake_pattern_cmdid; 861 u32 wow_del_wake_pattern_cmdid; 862 u32 wow_enable_disable_wake_event_cmdid; 863 u32 wow_enable_cmdid; 864 u32 wow_hostwakeup_from_sleep_cmdid; 865 u32 rtt_measreq_cmdid; 866 u32 rtt_tsf_cmdid; 867 u32 vdev_spectral_scan_configure_cmdid; 868 u32 vdev_spectral_scan_enable_cmdid; 869 u32 request_stats_cmdid; 870 u32 set_arp_ns_offload_cmdid; 871 u32 network_list_offload_config_cmdid; 872 u32 gtk_offload_cmdid; 873 u32 csa_offload_enable_cmdid; 874 u32 csa_offload_chanswitch_cmdid; 875 u32 chatter_set_mode_cmdid; 876 u32 peer_tid_addba_cmdid; 877 u32 peer_tid_delba_cmdid; 878 u32 sta_dtim_ps_method_cmdid; 879 u32 sta_uapsd_auto_trig_cmdid; 880 u32 sta_keepalive_cmd; 881 u32 echo_cmdid; 882 u32 pdev_utf_cmdid; 883 u32 dbglog_cfg_cmdid; 884 u32 pdev_qvit_cmdid; 885 u32 pdev_ftm_intg_cmdid; 886 u32 vdev_set_keepalive_cmdid; 887 u32 vdev_get_keepalive_cmdid; 888 u32 force_fw_hang_cmdid; 889 u32 gpio_config_cmdid; 890 u32 gpio_output_cmdid; 891 u32 pdev_get_temperature_cmdid; 892 u32 vdev_set_wmm_params_cmdid; 893 u32 tdls_set_state_cmdid; 894 u32 tdls_peer_update_cmdid; 895 u32 adaptive_qcs_cmdid; 896 u32 scan_update_request_cmdid; 897 u32 vdev_standby_response_cmdid; 898 u32 vdev_resume_response_cmdid; 899 u32 wlan_peer_caching_add_peer_cmdid; 900 u32 wlan_peer_caching_evict_peer_cmdid; 901 u32 wlan_peer_caching_restore_peer_cmdid; 902 u32 wlan_peer_caching_print_all_peers_info_cmdid; 903 u32 peer_update_wds_entry_cmdid; 904 u32 peer_add_proxy_sta_entry_cmdid; 905 u32 rtt_keepalive_cmdid; 906 u32 oem_req_cmdid; 907 u32 nan_cmdid; 908 u32 vdev_ratemask_cmdid; 909 u32 qboost_cfg_cmdid; 910 u32 pdev_smart_ant_enable_cmdid; 911 u32 pdev_smart_ant_set_rx_antenna_cmdid; 912 u32 peer_smart_ant_set_tx_antenna_cmdid; 913 u32 peer_smart_ant_set_train_info_cmdid; 914 u32 peer_smart_ant_set_node_config_ops_cmdid; 915 u32 pdev_set_antenna_switch_table_cmdid; 916 u32 pdev_set_ctl_table_cmdid; 917 u32 pdev_set_mimogain_table_cmdid; 918 u32 pdev_ratepwr_table_cmdid; 919 u32 pdev_ratepwr_chainmsk_table_cmdid; 920 u32 pdev_fips_cmdid; 921 u32 tt_set_conf_cmdid; 922 u32 fwtest_cmdid; 923 u32 vdev_atf_request_cmdid; 924 u32 peer_atf_request_cmdid; 925 u32 pdev_get_ani_cck_config_cmdid; 926 u32 pdev_get_ani_ofdm_config_cmdid; 927 u32 pdev_reserve_ast_entry_cmdid; 928 u32 pdev_get_nfcal_power_cmdid; 929 u32 pdev_get_tpc_cmdid; 930 u32 pdev_get_ast_info_cmdid; 931 u32 vdev_set_dscp_tid_map_cmdid; 932 u32 pdev_get_info_cmdid; 933 u32 vdev_get_info_cmdid; 934 u32 vdev_filter_neighbor_rx_packets_cmdid; 935 u32 mu_cal_start_cmdid; 936 u32 set_cca_params_cmdid; 937 u32 pdev_bss_chan_info_request_cmdid; 938 u32 pdev_enable_adaptive_cca_cmdid; 939 u32 ext_resource_cfg_cmdid; 940 u32 vdev_set_ie_cmdid; 941 u32 set_lteu_config_cmdid; 942 u32 atf_ssid_grouping_request_cmdid; 943 u32 peer_atf_ext_request_cmdid; 944 u32 set_periodic_channel_stats_cfg_cmdid; 945 u32 peer_bwf_request_cmdid; 946 u32 btcoex_cfg_cmdid; 947 u32 peer_tx_mu_txmit_count_cmdid; 948 u32 peer_tx_mu_txmit_rstcnt_cmdid; 949 u32 peer_gid_userpos_list_cmdid; 950 u32 pdev_check_cal_version_cmdid; 951 u32 coex_version_cfg_cmid; 952 u32 pdev_get_rx_filter_cmdid; 953 u32 pdev_extended_nss_cfg_cmdid; 954 u32 vdev_set_scan_nac_rssi_cmdid; 955 u32 prog_gpio_band_select_cmdid; 956 u32 config_smart_logging_cmdid; 957 u32 debug_fatal_condition_cmdid; 958 u32 get_tsf_timer_cmdid; 959 u32 pdev_get_tpc_table_cmdid; 960 u32 vdev_sifs_trigger_time_cmdid; 961 u32 pdev_wds_entry_list_cmdid; 962 u32 tdls_set_offchan_mode_cmdid; 963 }; 964 965 /* 966 * wmi command groups. 967 */ 968 enum wmi_cmd_group { 969 /* 0 to 2 are reserved */ 970 WMI_GRP_START = 0x3, 971 WMI_GRP_SCAN = WMI_GRP_START, 972 WMI_GRP_PDEV, 973 WMI_GRP_VDEV, 974 WMI_GRP_PEER, 975 WMI_GRP_MGMT, 976 WMI_GRP_BA_NEG, 977 WMI_GRP_STA_PS, 978 WMI_GRP_DFS, 979 WMI_GRP_ROAM, 980 WMI_GRP_OFL_SCAN, 981 WMI_GRP_P2P, 982 WMI_GRP_AP_PS, 983 WMI_GRP_RATE_CTRL, 984 WMI_GRP_PROFILE, 985 WMI_GRP_SUSPEND, 986 WMI_GRP_BCN_FILTER, 987 WMI_GRP_WOW, 988 WMI_GRP_RTT, 989 WMI_GRP_SPECTRAL, 990 WMI_GRP_STATS, 991 WMI_GRP_ARP_NS_OFL, 992 WMI_GRP_NLO_OFL, 993 WMI_GRP_GTK_OFL, 994 WMI_GRP_CSA_OFL, 995 WMI_GRP_CHATTER, 996 WMI_GRP_TID_ADDBA, 997 WMI_GRP_MISC, 998 WMI_GRP_GPIO, 999 }; 1000 1001 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1) 1002 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1) 1003 1004 #define WMI_CMD_UNSUPPORTED 0 1005 1006 /* Command IDs and command events for MAIN FW. */ 1007 enum wmi_cmd_id { 1008 WMI_INIT_CMDID = 0x1, 1009 1010 /* Scan specific commands */ 1011 WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN), 1012 WMI_STOP_SCAN_CMDID, 1013 WMI_SCAN_CHAN_LIST_CMDID, 1014 WMI_SCAN_SCH_PRIO_TBL_CMDID, 1015 1016 /* PDEV (physical device) specific commands */ 1017 WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV), 1018 WMI_PDEV_SET_CHANNEL_CMDID, 1019 WMI_PDEV_SET_PARAM_CMDID, 1020 WMI_PDEV_PKTLOG_ENABLE_CMDID, 1021 WMI_PDEV_PKTLOG_DISABLE_CMDID, 1022 WMI_PDEV_SET_WMM_PARAMS_CMDID, 1023 WMI_PDEV_SET_HT_CAP_IE_CMDID, 1024 WMI_PDEV_SET_VHT_CAP_IE_CMDID, 1025 WMI_PDEV_SET_DSCP_TID_MAP_CMDID, 1026 WMI_PDEV_SET_QUIET_MODE_CMDID, 1027 WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1028 WMI_PDEV_GET_TPC_CONFIG_CMDID, 1029 WMI_PDEV_SET_BASE_MACADDR_CMDID, 1030 1031 /* VDEV (virtual device) specific commands */ 1032 WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV), 1033 WMI_VDEV_DELETE_CMDID, 1034 WMI_VDEV_START_REQUEST_CMDID, 1035 WMI_VDEV_RESTART_REQUEST_CMDID, 1036 WMI_VDEV_UP_CMDID, 1037 WMI_VDEV_STOP_CMDID, 1038 WMI_VDEV_DOWN_CMDID, 1039 WMI_VDEV_SET_PARAM_CMDID, 1040 WMI_VDEV_INSTALL_KEY_CMDID, 1041 1042 /* peer specific commands */ 1043 WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER), 1044 WMI_PEER_DELETE_CMDID, 1045 WMI_PEER_FLUSH_TIDS_CMDID, 1046 WMI_PEER_SET_PARAM_CMDID, 1047 WMI_PEER_ASSOC_CMDID, 1048 WMI_PEER_ADD_WDS_ENTRY_CMDID, 1049 WMI_PEER_REMOVE_WDS_ENTRY_CMDID, 1050 WMI_PEER_MCAST_GROUP_CMDID, 1051 1052 /* beacon/management specific commands */ 1053 WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT), 1054 WMI_PDEV_SEND_BCN_CMDID, 1055 WMI_BCN_TMPL_CMDID, 1056 WMI_BCN_FILTER_RX_CMDID, 1057 WMI_PRB_REQ_FILTER_RX_CMDID, 1058 WMI_MGMT_TX_CMDID, 1059 WMI_PRB_TMPL_CMDID, 1060 1061 /* commands to directly control BA negotiation directly from host. */ 1062 WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG), 1063 WMI_ADDBA_SEND_CMDID, 1064 WMI_ADDBA_STATUS_CMDID, 1065 WMI_DELBA_SEND_CMDID, 1066 WMI_ADDBA_SET_RESP_CMDID, 1067 WMI_SEND_SINGLEAMSDU_CMDID, 1068 1069 /* Station power save specific config */ 1070 WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS), 1071 WMI_STA_POWERSAVE_PARAM_CMDID, 1072 WMI_STA_MIMO_PS_MODE_CMDID, 1073 1074 /** DFS-specific commands */ 1075 WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS), 1076 WMI_PDEV_DFS_DISABLE_CMDID, 1077 1078 /* Roaming specific commands */ 1079 WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM), 1080 WMI_ROAM_SCAN_RSSI_THRESHOLD, 1081 WMI_ROAM_SCAN_PERIOD, 1082 WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1083 WMI_ROAM_AP_PROFILE, 1084 1085 /* offload scan specific commands */ 1086 WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN), 1087 WMI_OFL_SCAN_REMOVE_AP_PROFILE, 1088 WMI_OFL_SCAN_PERIOD, 1089 1090 /* P2P specific commands */ 1091 WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P), 1092 WMI_P2P_DEV_SET_DISCOVERABILITY, 1093 WMI_P2P_GO_SET_BEACON_IE, 1094 WMI_P2P_GO_SET_PROBE_RESP_IE, 1095 WMI_P2P_SET_VENDOR_IE_DATA_CMDID, 1096 1097 /* AP power save specific config */ 1098 WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS), 1099 WMI_AP_PS_PEER_UAPSD_COEX_CMDID, 1100 1101 /* Rate-control specific commands */ 1102 WMI_PEER_RATE_RETRY_SCHED_CMDID = 1103 WMI_CMD_GRP(WMI_GRP_RATE_CTRL), 1104 1105 /* WLAN Profiling commands. */ 1106 WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE), 1107 WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1108 WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1109 WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1110 WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1111 1112 /* Suspend resume command Ids */ 1113 WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND), 1114 WMI_PDEV_RESUME_CMDID, 1115 1116 /* Beacon filter commands */ 1117 WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER), 1118 WMI_RMV_BCN_FILTER_CMDID, 1119 1120 /* WOW Specific WMI commands*/ 1121 WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW), 1122 WMI_WOW_DEL_WAKE_PATTERN_CMDID, 1123 WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1124 WMI_WOW_ENABLE_CMDID, 1125 WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1126 1127 /* RTT measurement related cmd */ 1128 WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT), 1129 WMI_RTT_TSF_CMDID, 1130 1131 /* spectral scan commands */ 1132 WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL), 1133 WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1134 1135 /* F/W stats */ 1136 WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS), 1137 1138 /* ARP OFFLOAD REQUEST*/ 1139 WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL), 1140 1141 /* NS offload confid*/ 1142 WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL), 1143 1144 /* GTK offload Specific WMI commands*/ 1145 WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL), 1146 1147 /* CSA offload Specific WMI commands*/ 1148 WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL), 1149 WMI_CSA_OFFLOAD_CHANSWITCH_CMDID, 1150 1151 /* Chatter commands*/ 1152 WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER), 1153 1154 /* addba specific commands */ 1155 WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA), 1156 WMI_PEER_TID_DELBA_CMDID, 1157 1158 /* set station mimo powersave method */ 1159 WMI_STA_DTIM_PS_METHOD_CMDID, 1160 /* Configure the Station UAPSD AC Auto Trigger Parameters */ 1161 WMI_STA_UAPSD_AUTO_TRIG_CMDID, 1162 1163 /* STA Keep alive parameter configuration, 1164 * Requires WMI_SERVICE_STA_KEEP_ALIVE 1165 */ 1166 WMI_STA_KEEPALIVE_CMD, 1167 1168 /* misc command group */ 1169 WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC), 1170 WMI_PDEV_UTF_CMDID, 1171 WMI_DBGLOG_CFG_CMDID, 1172 WMI_PDEV_QVIT_CMDID, 1173 WMI_PDEV_FTM_INTG_CMDID, 1174 WMI_VDEV_SET_KEEPALIVE_CMDID, 1175 WMI_VDEV_GET_KEEPALIVE_CMDID, 1176 WMI_FORCE_FW_HANG_CMDID, 1177 1178 /* GPIO Configuration */ 1179 WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO), 1180 WMI_GPIO_OUTPUT_CMDID, 1181 }; 1182 1183 enum wmi_event_id { 1184 WMI_SERVICE_READY_EVENTID = 0x1, 1185 WMI_READY_EVENTID, 1186 1187 /* Scan specific events */ 1188 WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN), 1189 1190 /* PDEV specific events */ 1191 WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV), 1192 WMI_CHAN_INFO_EVENTID, 1193 WMI_PHYERR_EVENTID, 1194 1195 /* VDEV specific events */ 1196 WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV), 1197 WMI_VDEV_STOPPED_EVENTID, 1198 WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID, 1199 1200 /* peer specific events */ 1201 WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER), 1202 1203 /* beacon/mgmt specific events */ 1204 WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT), 1205 WMI_HOST_SWBA_EVENTID, 1206 WMI_TBTTOFFSET_UPDATE_EVENTID, 1207 1208 /* ADDBA Related WMI Events*/ 1209 WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG), 1210 WMI_TX_ADDBA_COMPLETE_EVENTID, 1211 1212 /* Roam event to trigger roaming on host */ 1213 WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM), 1214 WMI_PROFILE_MATCH, 1215 1216 /* WoW */ 1217 WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW), 1218 1219 /* RTT */ 1220 WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT), 1221 WMI_TSF_MEASUREMENT_REPORT_EVENTID, 1222 WMI_RTT_ERROR_REPORT_EVENTID, 1223 1224 /* GTK offload */ 1225 WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL), 1226 WMI_GTK_REKEY_FAIL_EVENTID, 1227 1228 /* CSA IE received event */ 1229 WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL), 1230 1231 /* Misc events */ 1232 WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC), 1233 WMI_PDEV_UTF_EVENTID, 1234 WMI_DEBUG_MESG_EVENTID, 1235 WMI_UPDATE_STATS_EVENTID, 1236 WMI_DEBUG_PRINT_EVENTID, 1237 WMI_DCS_INTERFERENCE_EVENTID, 1238 WMI_PDEV_QVIT_EVENTID, 1239 WMI_WLAN_PROFILE_DATA_EVENTID, 1240 WMI_PDEV_FTM_INTG_EVENTID, 1241 WMI_WLAN_FREQ_AVOID_EVENTID, 1242 WMI_VDEV_GET_KEEPALIVE_EVENTID, 1243 1244 /* GPIO Event */ 1245 WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO), 1246 }; 1247 1248 /* Command IDs and command events for 10.X firmware */ 1249 enum wmi_10x_cmd_id { 1250 WMI_10X_START_CMDID = 0x9000, 1251 WMI_10X_END_CMDID = 0x9FFF, 1252 1253 /* initialize the wlan sub system */ 1254 WMI_10X_INIT_CMDID, 1255 1256 /* Scan specific commands */ 1257 1258 WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID, 1259 WMI_10X_STOP_SCAN_CMDID, 1260 WMI_10X_SCAN_CHAN_LIST_CMDID, 1261 WMI_10X_ECHO_CMDID, 1262 1263 /* PDEV(physical device) specific commands */ 1264 WMI_10X_PDEV_SET_REGDOMAIN_CMDID, 1265 WMI_10X_PDEV_SET_CHANNEL_CMDID, 1266 WMI_10X_PDEV_SET_PARAM_CMDID, 1267 WMI_10X_PDEV_PKTLOG_ENABLE_CMDID, 1268 WMI_10X_PDEV_PKTLOG_DISABLE_CMDID, 1269 WMI_10X_PDEV_SET_WMM_PARAMS_CMDID, 1270 WMI_10X_PDEV_SET_HT_CAP_IE_CMDID, 1271 WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID, 1272 WMI_10X_PDEV_SET_BASE_MACADDR_CMDID, 1273 WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID, 1274 WMI_10X_PDEV_SET_QUIET_MODE_CMDID, 1275 WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1276 WMI_10X_PDEV_GET_TPC_CONFIG_CMDID, 1277 1278 /* VDEV(virtual device) specific commands */ 1279 WMI_10X_VDEV_CREATE_CMDID, 1280 WMI_10X_VDEV_DELETE_CMDID, 1281 WMI_10X_VDEV_START_REQUEST_CMDID, 1282 WMI_10X_VDEV_RESTART_REQUEST_CMDID, 1283 WMI_10X_VDEV_UP_CMDID, 1284 WMI_10X_VDEV_STOP_CMDID, 1285 WMI_10X_VDEV_DOWN_CMDID, 1286 WMI_10X_VDEV_STANDBY_RESPONSE_CMDID, 1287 WMI_10X_VDEV_RESUME_RESPONSE_CMDID, 1288 WMI_10X_VDEV_SET_PARAM_CMDID, 1289 WMI_10X_VDEV_INSTALL_KEY_CMDID, 1290 1291 /* peer specific commands */ 1292 WMI_10X_PEER_CREATE_CMDID, 1293 WMI_10X_PEER_DELETE_CMDID, 1294 WMI_10X_PEER_FLUSH_TIDS_CMDID, 1295 WMI_10X_PEER_SET_PARAM_CMDID, 1296 WMI_10X_PEER_ASSOC_CMDID, 1297 WMI_10X_PEER_ADD_WDS_ENTRY_CMDID, 1298 WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID, 1299 WMI_10X_PEER_MCAST_GROUP_CMDID, 1300 1301 /* beacon/management specific commands */ 1302 1303 WMI_10X_BCN_TX_CMDID, 1304 WMI_10X_BCN_PRB_TMPL_CMDID, 1305 WMI_10X_BCN_FILTER_RX_CMDID, 1306 WMI_10X_PRB_REQ_FILTER_RX_CMDID, 1307 WMI_10X_MGMT_TX_CMDID, 1308 1309 /* commands to directly control ba negotiation directly from host. */ 1310 WMI_10X_ADDBA_CLEAR_RESP_CMDID, 1311 WMI_10X_ADDBA_SEND_CMDID, 1312 WMI_10X_ADDBA_STATUS_CMDID, 1313 WMI_10X_DELBA_SEND_CMDID, 1314 WMI_10X_ADDBA_SET_RESP_CMDID, 1315 WMI_10X_SEND_SINGLEAMSDU_CMDID, 1316 1317 /* Station power save specific config */ 1318 WMI_10X_STA_POWERSAVE_MODE_CMDID, 1319 WMI_10X_STA_POWERSAVE_PARAM_CMDID, 1320 WMI_10X_STA_MIMO_PS_MODE_CMDID, 1321 1322 /* set debug log config */ 1323 WMI_10X_DBGLOG_CFG_CMDID, 1324 1325 /* DFS-specific commands */ 1326 WMI_10X_PDEV_DFS_ENABLE_CMDID, 1327 WMI_10X_PDEV_DFS_DISABLE_CMDID, 1328 1329 /* QVIT specific command id */ 1330 WMI_10X_PDEV_QVIT_CMDID, 1331 1332 /* Offload Scan and Roaming related commands */ 1333 WMI_10X_ROAM_SCAN_MODE, 1334 WMI_10X_ROAM_SCAN_RSSI_THRESHOLD, 1335 WMI_10X_ROAM_SCAN_PERIOD, 1336 WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1337 WMI_10X_ROAM_AP_PROFILE, 1338 WMI_10X_OFL_SCAN_ADD_AP_PROFILE, 1339 WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE, 1340 WMI_10X_OFL_SCAN_PERIOD, 1341 1342 /* P2P specific commands */ 1343 WMI_10X_P2P_DEV_SET_DEVICE_INFO, 1344 WMI_10X_P2P_DEV_SET_DISCOVERABILITY, 1345 WMI_10X_P2P_GO_SET_BEACON_IE, 1346 WMI_10X_P2P_GO_SET_PROBE_RESP_IE, 1347 1348 /* AP power save specific config */ 1349 WMI_10X_AP_PS_PEER_PARAM_CMDID, 1350 WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID, 1351 1352 /* Rate-control specific commands */ 1353 WMI_10X_PEER_RATE_RETRY_SCHED_CMDID, 1354 1355 /* WLAN Profiling commands. */ 1356 WMI_10X_WLAN_PROFILE_TRIGGER_CMDID, 1357 WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1358 WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1359 WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1360 WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1361 1362 /* Suspend resume command Ids */ 1363 WMI_10X_PDEV_SUSPEND_CMDID, 1364 WMI_10X_PDEV_RESUME_CMDID, 1365 1366 /* Beacon filter commands */ 1367 WMI_10X_ADD_BCN_FILTER_CMDID, 1368 WMI_10X_RMV_BCN_FILTER_CMDID, 1369 1370 /* WOW Specific WMI commands*/ 1371 WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID, 1372 WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID, 1373 WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1374 WMI_10X_WOW_ENABLE_CMDID, 1375 WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1376 1377 /* RTT measurement related cmd */ 1378 WMI_10X_RTT_MEASREQ_CMDID, 1379 WMI_10X_RTT_TSF_CMDID, 1380 1381 /* transmit beacon by value */ 1382 WMI_10X_PDEV_SEND_BCN_CMDID, 1383 1384 /* F/W stats */ 1385 WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1386 WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1387 WMI_10X_REQUEST_STATS_CMDID, 1388 1389 /* GPIO Configuration */ 1390 WMI_10X_GPIO_CONFIG_CMDID, 1391 WMI_10X_GPIO_OUTPUT_CMDID, 1392 1393 WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1, 1394 }; 1395 1396 enum wmi_10x_event_id { 1397 WMI_10X_SERVICE_READY_EVENTID = 0x8000, 1398 WMI_10X_READY_EVENTID, 1399 WMI_10X_START_EVENTID = 0x9000, 1400 WMI_10X_END_EVENTID = 0x9FFF, 1401 1402 /* Scan specific events */ 1403 WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID, 1404 WMI_10X_ECHO_EVENTID, 1405 WMI_10X_DEBUG_MESG_EVENTID, 1406 WMI_10X_UPDATE_STATS_EVENTID, 1407 1408 /* Instantaneous RSSI event */ 1409 WMI_10X_INST_RSSI_STATS_EVENTID, 1410 1411 /* VDEV specific events */ 1412 WMI_10X_VDEV_START_RESP_EVENTID, 1413 WMI_10X_VDEV_STANDBY_REQ_EVENTID, 1414 WMI_10X_VDEV_RESUME_REQ_EVENTID, 1415 WMI_10X_VDEV_STOPPED_EVENTID, 1416 1417 /* peer specific events */ 1418 WMI_10X_PEER_STA_KICKOUT_EVENTID, 1419 1420 /* beacon/mgmt specific events */ 1421 WMI_10X_HOST_SWBA_EVENTID, 1422 WMI_10X_TBTTOFFSET_UPDATE_EVENTID, 1423 WMI_10X_MGMT_RX_EVENTID, 1424 1425 /* Channel stats event */ 1426 WMI_10X_CHAN_INFO_EVENTID, 1427 1428 /* PHY Error specific WMI event */ 1429 WMI_10X_PHYERR_EVENTID, 1430 1431 /* Roam event to trigger roaming on host */ 1432 WMI_10X_ROAM_EVENTID, 1433 1434 /* matching AP found from list of profiles */ 1435 WMI_10X_PROFILE_MATCH, 1436 1437 /* debug print message used for tracing FW code while debugging */ 1438 WMI_10X_DEBUG_PRINT_EVENTID, 1439 /* VI spoecific event */ 1440 WMI_10X_PDEV_QVIT_EVENTID, 1441 /* FW code profile data in response to profile request */ 1442 WMI_10X_WLAN_PROFILE_DATA_EVENTID, 1443 1444 /*RTT related event ID*/ 1445 WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID, 1446 WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID, 1447 WMI_10X_RTT_ERROR_REPORT_EVENTID, 1448 1449 WMI_10X_WOW_WAKEUP_HOST_EVENTID, 1450 WMI_10X_DCS_INTERFERENCE_EVENTID, 1451 1452 /* TPC config for the current operating channel */ 1453 WMI_10X_PDEV_TPC_CONFIG_EVENTID, 1454 1455 WMI_10X_GPIO_INPUT_EVENTID, 1456 WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1, 1457 }; 1458 1459 enum wmi_10_2_cmd_id { 1460 WMI_10_2_START_CMDID = 0x9000, 1461 WMI_10_2_END_CMDID = 0x9FFF, 1462 WMI_10_2_INIT_CMDID, 1463 WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID, 1464 WMI_10_2_STOP_SCAN_CMDID, 1465 WMI_10_2_SCAN_CHAN_LIST_CMDID, 1466 WMI_10_2_ECHO_CMDID, 1467 WMI_10_2_PDEV_SET_REGDOMAIN_CMDID, 1468 WMI_10_2_PDEV_SET_CHANNEL_CMDID, 1469 WMI_10_2_PDEV_SET_PARAM_CMDID, 1470 WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID, 1471 WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID, 1472 WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID, 1473 WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID, 1474 WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID, 1475 WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID, 1476 WMI_10_2_PDEV_SET_QUIET_MODE_CMDID, 1477 WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1478 WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID, 1479 WMI_10_2_VDEV_CREATE_CMDID, 1480 WMI_10_2_VDEV_DELETE_CMDID, 1481 WMI_10_2_VDEV_START_REQUEST_CMDID, 1482 WMI_10_2_VDEV_RESTART_REQUEST_CMDID, 1483 WMI_10_2_VDEV_UP_CMDID, 1484 WMI_10_2_VDEV_STOP_CMDID, 1485 WMI_10_2_VDEV_DOWN_CMDID, 1486 WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID, 1487 WMI_10_2_VDEV_RESUME_RESPONSE_CMDID, 1488 WMI_10_2_VDEV_SET_PARAM_CMDID, 1489 WMI_10_2_VDEV_INSTALL_KEY_CMDID, 1490 WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID, 1491 WMI_10_2_PEER_CREATE_CMDID, 1492 WMI_10_2_PEER_DELETE_CMDID, 1493 WMI_10_2_PEER_FLUSH_TIDS_CMDID, 1494 WMI_10_2_PEER_SET_PARAM_CMDID, 1495 WMI_10_2_PEER_ASSOC_CMDID, 1496 WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID, 1497 WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID, 1498 WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID, 1499 WMI_10_2_PEER_MCAST_GROUP_CMDID, 1500 WMI_10_2_BCN_TX_CMDID, 1501 WMI_10_2_BCN_PRB_TMPL_CMDID, 1502 WMI_10_2_BCN_FILTER_RX_CMDID, 1503 WMI_10_2_PRB_REQ_FILTER_RX_CMDID, 1504 WMI_10_2_MGMT_TX_CMDID, 1505 WMI_10_2_ADDBA_CLEAR_RESP_CMDID, 1506 WMI_10_2_ADDBA_SEND_CMDID, 1507 WMI_10_2_ADDBA_STATUS_CMDID, 1508 WMI_10_2_DELBA_SEND_CMDID, 1509 WMI_10_2_ADDBA_SET_RESP_CMDID, 1510 WMI_10_2_SEND_SINGLEAMSDU_CMDID, 1511 WMI_10_2_STA_POWERSAVE_MODE_CMDID, 1512 WMI_10_2_STA_POWERSAVE_PARAM_CMDID, 1513 WMI_10_2_STA_MIMO_PS_MODE_CMDID, 1514 WMI_10_2_DBGLOG_CFG_CMDID, 1515 WMI_10_2_PDEV_DFS_ENABLE_CMDID, 1516 WMI_10_2_PDEV_DFS_DISABLE_CMDID, 1517 WMI_10_2_PDEV_QVIT_CMDID, 1518 WMI_10_2_ROAM_SCAN_MODE, 1519 WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD, 1520 WMI_10_2_ROAM_SCAN_PERIOD, 1521 WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1522 WMI_10_2_ROAM_AP_PROFILE, 1523 WMI_10_2_OFL_SCAN_ADD_AP_PROFILE, 1524 WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE, 1525 WMI_10_2_OFL_SCAN_PERIOD, 1526 WMI_10_2_P2P_DEV_SET_DEVICE_INFO, 1527 WMI_10_2_P2P_DEV_SET_DISCOVERABILITY, 1528 WMI_10_2_P2P_GO_SET_BEACON_IE, 1529 WMI_10_2_P2P_GO_SET_PROBE_RESP_IE, 1530 WMI_10_2_AP_PS_PEER_PARAM_CMDID, 1531 WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID, 1532 WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID, 1533 WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID, 1534 WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1535 WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1536 WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1537 WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1538 WMI_10_2_PDEV_SUSPEND_CMDID, 1539 WMI_10_2_PDEV_RESUME_CMDID, 1540 WMI_10_2_ADD_BCN_FILTER_CMDID, 1541 WMI_10_2_RMV_BCN_FILTER_CMDID, 1542 WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID, 1543 WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID, 1544 WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1545 WMI_10_2_WOW_ENABLE_CMDID, 1546 WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1547 WMI_10_2_RTT_MEASREQ_CMDID, 1548 WMI_10_2_RTT_TSF_CMDID, 1549 WMI_10_2_RTT_KEEPALIVE_CMDID, 1550 WMI_10_2_PDEV_SEND_BCN_CMDID, 1551 WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1552 WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1553 WMI_10_2_REQUEST_STATS_CMDID, 1554 WMI_10_2_GPIO_CONFIG_CMDID, 1555 WMI_10_2_GPIO_OUTPUT_CMDID, 1556 WMI_10_2_VDEV_RATEMASK_CMDID, 1557 WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID, 1558 WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1559 WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1560 WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1561 WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1562 WMI_10_2_FORCE_FW_HANG_CMDID, 1563 WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1564 WMI_10_2_PDEV_SET_CTL_TABLE_CMDID, 1565 WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1566 WMI_10_2_PDEV_RATEPWR_TABLE_CMDID, 1567 WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1568 WMI_10_2_PDEV_GET_INFO, 1569 WMI_10_2_VDEV_GET_INFO, 1570 WMI_10_2_VDEV_ATF_REQUEST_CMDID, 1571 WMI_10_2_PEER_ATF_REQUEST_CMDID, 1572 WMI_10_2_PDEV_GET_TEMPERATURE_CMDID, 1573 WMI_10_2_MU_CAL_START_CMDID, 1574 WMI_10_2_SET_LTEU_CONFIG_CMDID, 1575 WMI_10_2_SET_CCA_PARAMS, 1576 WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1577 WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1, 1578 }; 1579 1580 enum wmi_10_2_event_id { 1581 WMI_10_2_SERVICE_READY_EVENTID = 0x8000, 1582 WMI_10_2_READY_EVENTID, 1583 WMI_10_2_DEBUG_MESG_EVENTID, 1584 WMI_10_2_START_EVENTID = 0x9000, 1585 WMI_10_2_END_EVENTID = 0x9FFF, 1586 WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID, 1587 WMI_10_2_ECHO_EVENTID, 1588 WMI_10_2_UPDATE_STATS_EVENTID, 1589 WMI_10_2_INST_RSSI_STATS_EVENTID, 1590 WMI_10_2_VDEV_START_RESP_EVENTID, 1591 WMI_10_2_VDEV_STANDBY_REQ_EVENTID, 1592 WMI_10_2_VDEV_RESUME_REQ_EVENTID, 1593 WMI_10_2_VDEV_STOPPED_EVENTID, 1594 WMI_10_2_PEER_STA_KICKOUT_EVENTID, 1595 WMI_10_2_HOST_SWBA_EVENTID, 1596 WMI_10_2_TBTTOFFSET_UPDATE_EVENTID, 1597 WMI_10_2_MGMT_RX_EVENTID, 1598 WMI_10_2_CHAN_INFO_EVENTID, 1599 WMI_10_2_PHYERR_EVENTID, 1600 WMI_10_2_ROAM_EVENTID, 1601 WMI_10_2_PROFILE_MATCH, 1602 WMI_10_2_DEBUG_PRINT_EVENTID, 1603 WMI_10_2_PDEV_QVIT_EVENTID, 1604 WMI_10_2_WLAN_PROFILE_DATA_EVENTID, 1605 WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID, 1606 WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID, 1607 WMI_10_2_RTT_ERROR_REPORT_EVENTID, 1608 WMI_10_2_RTT_KEEPALIVE_EVENTID, 1609 WMI_10_2_WOW_WAKEUP_HOST_EVENTID, 1610 WMI_10_2_DCS_INTERFERENCE_EVENTID, 1611 WMI_10_2_PDEV_TPC_CONFIG_EVENTID, 1612 WMI_10_2_GPIO_INPUT_EVENTID, 1613 WMI_10_2_PEER_RATECODE_LIST_EVENTID, 1614 WMI_10_2_GENERIC_BUFFER_EVENTID, 1615 WMI_10_2_MCAST_BUF_RELEASE_EVENTID, 1616 WMI_10_2_MCAST_LIST_AGEOUT_EVENTID, 1617 WMI_10_2_WDS_PEER_EVENTID, 1618 WMI_10_2_PEER_STA_PS_STATECHG_EVENTID, 1619 WMI_10_2_PDEV_TEMPERATURE_EVENTID, 1620 WMI_10_2_MU_REPORT_EVENTID, 1621 WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID, 1622 WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1, 1623 }; 1624 1625 enum wmi_10_4_cmd_id { 1626 WMI_10_4_START_CMDID = 0x9000, 1627 WMI_10_4_END_CMDID = 0x9FFF, 1628 WMI_10_4_INIT_CMDID, 1629 WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID, 1630 WMI_10_4_STOP_SCAN_CMDID, 1631 WMI_10_4_SCAN_CHAN_LIST_CMDID, 1632 WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID, 1633 WMI_10_4_SCAN_UPDATE_REQUEST_CMDID, 1634 WMI_10_4_ECHO_CMDID, 1635 WMI_10_4_PDEV_SET_REGDOMAIN_CMDID, 1636 WMI_10_4_PDEV_SET_CHANNEL_CMDID, 1637 WMI_10_4_PDEV_SET_PARAM_CMDID, 1638 WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID, 1639 WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID, 1640 WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID, 1641 WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID, 1642 WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID, 1643 WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID, 1644 WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID, 1645 WMI_10_4_PDEV_SET_QUIET_MODE_CMDID, 1646 WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1647 WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID, 1648 WMI_10_4_VDEV_CREATE_CMDID, 1649 WMI_10_4_VDEV_DELETE_CMDID, 1650 WMI_10_4_VDEV_START_REQUEST_CMDID, 1651 WMI_10_4_VDEV_RESTART_REQUEST_CMDID, 1652 WMI_10_4_VDEV_UP_CMDID, 1653 WMI_10_4_VDEV_STOP_CMDID, 1654 WMI_10_4_VDEV_DOWN_CMDID, 1655 WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID, 1656 WMI_10_4_VDEV_RESUME_RESPONSE_CMDID, 1657 WMI_10_4_VDEV_SET_PARAM_CMDID, 1658 WMI_10_4_VDEV_INSTALL_KEY_CMDID, 1659 WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID, 1660 WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID, 1661 WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID, 1662 WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID, 1663 WMI_10_4_PEER_CREATE_CMDID, 1664 WMI_10_4_PEER_DELETE_CMDID, 1665 WMI_10_4_PEER_FLUSH_TIDS_CMDID, 1666 WMI_10_4_PEER_SET_PARAM_CMDID, 1667 WMI_10_4_PEER_ASSOC_CMDID, 1668 WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID, 1669 WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID, 1670 WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID, 1671 WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID, 1672 WMI_10_4_PEER_MCAST_GROUP_CMDID, 1673 WMI_10_4_BCN_TX_CMDID, 1674 WMI_10_4_PDEV_SEND_BCN_CMDID, 1675 WMI_10_4_BCN_PRB_TMPL_CMDID, 1676 WMI_10_4_BCN_FILTER_RX_CMDID, 1677 WMI_10_4_PRB_REQ_FILTER_RX_CMDID, 1678 WMI_10_4_MGMT_TX_CMDID, 1679 WMI_10_4_PRB_TMPL_CMDID, 1680 WMI_10_4_ADDBA_CLEAR_RESP_CMDID, 1681 WMI_10_4_ADDBA_SEND_CMDID, 1682 WMI_10_4_ADDBA_STATUS_CMDID, 1683 WMI_10_4_DELBA_SEND_CMDID, 1684 WMI_10_4_ADDBA_SET_RESP_CMDID, 1685 WMI_10_4_SEND_SINGLEAMSDU_CMDID, 1686 WMI_10_4_STA_POWERSAVE_MODE_CMDID, 1687 WMI_10_4_STA_POWERSAVE_PARAM_CMDID, 1688 WMI_10_4_STA_MIMO_PS_MODE_CMDID, 1689 WMI_10_4_DBGLOG_CFG_CMDID, 1690 WMI_10_4_PDEV_DFS_ENABLE_CMDID, 1691 WMI_10_4_PDEV_DFS_DISABLE_CMDID, 1692 WMI_10_4_PDEV_QVIT_CMDID, 1693 WMI_10_4_ROAM_SCAN_MODE, 1694 WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD, 1695 WMI_10_4_ROAM_SCAN_PERIOD, 1696 WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1697 WMI_10_4_ROAM_AP_PROFILE, 1698 WMI_10_4_OFL_SCAN_ADD_AP_PROFILE, 1699 WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE, 1700 WMI_10_4_OFL_SCAN_PERIOD, 1701 WMI_10_4_P2P_DEV_SET_DEVICE_INFO, 1702 WMI_10_4_P2P_DEV_SET_DISCOVERABILITY, 1703 WMI_10_4_P2P_GO_SET_BEACON_IE, 1704 WMI_10_4_P2P_GO_SET_PROBE_RESP_IE, 1705 WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID, 1706 WMI_10_4_AP_PS_PEER_PARAM_CMDID, 1707 WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID, 1708 WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID, 1709 WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID, 1710 WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1711 WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1712 WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1713 WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1714 WMI_10_4_PDEV_SUSPEND_CMDID, 1715 WMI_10_4_PDEV_RESUME_CMDID, 1716 WMI_10_4_ADD_BCN_FILTER_CMDID, 1717 WMI_10_4_RMV_BCN_FILTER_CMDID, 1718 WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID, 1719 WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID, 1720 WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1721 WMI_10_4_WOW_ENABLE_CMDID, 1722 WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1723 WMI_10_4_RTT_MEASREQ_CMDID, 1724 WMI_10_4_RTT_TSF_CMDID, 1725 WMI_10_4_RTT_KEEPALIVE_CMDID, 1726 WMI_10_4_OEM_REQ_CMDID, 1727 WMI_10_4_NAN_CMDID, 1728 WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1729 WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1730 WMI_10_4_REQUEST_STATS_CMDID, 1731 WMI_10_4_GPIO_CONFIG_CMDID, 1732 WMI_10_4_GPIO_OUTPUT_CMDID, 1733 WMI_10_4_VDEV_RATEMASK_CMDID, 1734 WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID, 1735 WMI_10_4_GTK_OFFLOAD_CMDID, 1736 WMI_10_4_QBOOST_CFG_CMDID, 1737 WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID, 1738 WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID, 1739 WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1740 WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1741 WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1742 WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1743 WMI_10_4_VDEV_SET_KEEPALIVE_CMDID, 1744 WMI_10_4_VDEV_GET_KEEPALIVE_CMDID, 1745 WMI_10_4_FORCE_FW_HANG_CMDID, 1746 WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1747 WMI_10_4_PDEV_SET_CTL_TABLE_CMDID, 1748 WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1749 WMI_10_4_PDEV_RATEPWR_TABLE_CMDID, 1750 WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1751 WMI_10_4_PDEV_FIPS_CMDID, 1752 WMI_10_4_TT_SET_CONF_CMDID, 1753 WMI_10_4_FWTEST_CMDID, 1754 WMI_10_4_VDEV_ATF_REQUEST_CMDID, 1755 WMI_10_4_PEER_ATF_REQUEST_CMDID, 1756 WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID, 1757 WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID, 1758 WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID, 1759 WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID, 1760 WMI_10_4_PDEV_GET_TPC_CMDID, 1761 WMI_10_4_PDEV_GET_AST_INFO_CMDID, 1762 WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID, 1763 WMI_10_4_PDEV_GET_TEMPERATURE_CMDID, 1764 WMI_10_4_PDEV_GET_INFO_CMDID, 1765 WMI_10_4_VDEV_GET_INFO_CMDID, 1766 WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID, 1767 WMI_10_4_MU_CAL_START_CMDID, 1768 WMI_10_4_SET_CCA_PARAMS_CMDID, 1769 WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1770 WMI_10_4_EXT_RESOURCE_CFG_CMDID, 1771 WMI_10_4_VDEV_SET_IE_CMDID, 1772 WMI_10_4_SET_LTEU_CONFIG_CMDID, 1773 WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID, 1774 WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID, 1775 WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG, 1776 WMI_10_4_PEER_BWF_REQUEST_CMDID, 1777 WMI_10_4_BTCOEX_CFG_CMDID, 1778 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID, 1779 WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID, 1780 WMI_10_4_PEER_GID_USERPOS_LIST_CMDID, 1781 WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID, 1782 WMI_10_4_COEX_VERSION_CFG_CMID, 1783 WMI_10_4_PDEV_GET_RX_FILTER_CMDID, 1784 WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID, 1785 WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID, 1786 WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID, 1787 WMI_10_4_CONFIG_SMART_LOGGING_CMDID, 1788 WMI_10_4_DEBUG_FATAL_CONDITION_CMDID, 1789 WMI_10_4_GET_TSF_TIMER_CMDID, 1790 WMI_10_4_PDEV_GET_TPC_TABLE_CMDID, 1791 WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID, 1792 WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID, 1793 WMI_10_4_TDLS_SET_STATE_CMDID, 1794 WMI_10_4_TDLS_PEER_UPDATE_CMDID, 1795 WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID, 1796 WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1, 1797 }; 1798 1799 enum wmi_10_4_event_id { 1800 WMI_10_4_SERVICE_READY_EVENTID = 0x8000, 1801 WMI_10_4_READY_EVENTID, 1802 WMI_10_4_DEBUG_MESG_EVENTID, 1803 WMI_10_4_START_EVENTID = 0x9000, 1804 WMI_10_4_END_EVENTID = 0x9FFF, 1805 WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID, 1806 WMI_10_4_ECHO_EVENTID, 1807 WMI_10_4_UPDATE_STATS_EVENTID, 1808 WMI_10_4_INST_RSSI_STATS_EVENTID, 1809 WMI_10_4_VDEV_START_RESP_EVENTID, 1810 WMI_10_4_VDEV_STANDBY_REQ_EVENTID, 1811 WMI_10_4_VDEV_RESUME_REQ_EVENTID, 1812 WMI_10_4_VDEV_STOPPED_EVENTID, 1813 WMI_10_4_PEER_STA_KICKOUT_EVENTID, 1814 WMI_10_4_HOST_SWBA_EVENTID, 1815 WMI_10_4_TBTTOFFSET_UPDATE_EVENTID, 1816 WMI_10_4_MGMT_RX_EVENTID, 1817 WMI_10_4_CHAN_INFO_EVENTID, 1818 WMI_10_4_PHYERR_EVENTID, 1819 WMI_10_4_ROAM_EVENTID, 1820 WMI_10_4_PROFILE_MATCH, 1821 WMI_10_4_DEBUG_PRINT_EVENTID, 1822 WMI_10_4_PDEV_QVIT_EVENTID, 1823 WMI_10_4_WLAN_PROFILE_DATA_EVENTID, 1824 WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID, 1825 WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID, 1826 WMI_10_4_RTT_ERROR_REPORT_EVENTID, 1827 WMI_10_4_RTT_KEEPALIVE_EVENTID, 1828 WMI_10_4_OEM_CAPABILITY_EVENTID, 1829 WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID, 1830 WMI_10_4_OEM_ERROR_REPORT_EVENTID, 1831 WMI_10_4_NAN_EVENTID, 1832 WMI_10_4_WOW_WAKEUP_HOST_EVENTID, 1833 WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID, 1834 WMI_10_4_GTK_REKEY_FAIL_EVENTID, 1835 WMI_10_4_DCS_INTERFERENCE_EVENTID, 1836 WMI_10_4_PDEV_TPC_CONFIG_EVENTID, 1837 WMI_10_4_CSA_HANDLING_EVENTID, 1838 WMI_10_4_GPIO_INPUT_EVENTID, 1839 WMI_10_4_PEER_RATECODE_LIST_EVENTID, 1840 WMI_10_4_GENERIC_BUFFER_EVENTID, 1841 WMI_10_4_MCAST_BUF_RELEASE_EVENTID, 1842 WMI_10_4_MCAST_LIST_AGEOUT_EVENTID, 1843 WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID, 1844 WMI_10_4_WDS_PEER_EVENTID, 1845 WMI_10_4_PEER_STA_PS_STATECHG_EVENTID, 1846 WMI_10_4_PDEV_FIPS_EVENTID, 1847 WMI_10_4_TT_STATS_EVENTID, 1848 WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID, 1849 WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID, 1850 WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID, 1851 WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID, 1852 WMI_10_4_PDEV_NFCAL_POWER_EVENTID, 1853 WMI_10_4_PDEV_TPC_EVENTID, 1854 WMI_10_4_PDEV_GET_AST_INFO_EVENTID, 1855 WMI_10_4_PDEV_TEMPERATURE_EVENTID, 1856 WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID, 1857 WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID, 1858 WMI_10_4_MU_REPORT_EVENTID, 1859 WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID, 1860 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID, 1861 WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID, 1862 WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID, 1863 WMI_10_4_ATF_PEER_STATS_EVENTID, 1864 WMI_10_4_PDEV_GET_RX_FILTER_EVENTID, 1865 WMI_10_4_NAC_RSSI_EVENTID, 1866 WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID, 1867 WMI_10_4_GET_TSF_TIMER_RESP_EVENTID, 1868 WMI_10_4_PDEV_TPC_TABLE_EVENTID, 1869 WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID, 1870 WMI_10_4_TDLS_PEER_EVENTID, 1871 WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1, 1872 }; 1873 1874 enum wmi_phy_mode { 1875 MODE_11A = 0, /* 11a Mode */ 1876 MODE_11G = 1, /* 11b/g Mode */ 1877 MODE_11B = 2, /* 11b Mode */ 1878 MODE_11GONLY = 3, /* 11g only Mode */ 1879 MODE_11NA_HT20 = 4, /* 11a HT20 mode */ 1880 MODE_11NG_HT20 = 5, /* 11g HT20 mode */ 1881 MODE_11NA_HT40 = 6, /* 11a HT40 mode */ 1882 MODE_11NG_HT40 = 7, /* 11g HT40 mode */ 1883 MODE_11AC_VHT20 = 8, 1884 MODE_11AC_VHT40 = 9, 1885 MODE_11AC_VHT80 = 10, 1886 /* MODE_11AC_VHT160 = 11, */ 1887 MODE_11AC_VHT20_2G = 11, 1888 MODE_11AC_VHT40_2G = 12, 1889 MODE_11AC_VHT80_2G = 13, 1890 MODE_11AC_VHT80_80 = 14, 1891 MODE_11AC_VHT160 = 15, 1892 MODE_UNKNOWN = 16, 1893 MODE_MAX = 16 1894 }; 1895 1896 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode) 1897 { 1898 switch (mode) { 1899 case MODE_11A: 1900 return "11a"; 1901 case MODE_11G: 1902 return "11g"; 1903 case MODE_11B: 1904 return "11b"; 1905 case MODE_11GONLY: 1906 return "11gonly"; 1907 case MODE_11NA_HT20: 1908 return "11na-ht20"; 1909 case MODE_11NG_HT20: 1910 return "11ng-ht20"; 1911 case MODE_11NA_HT40: 1912 return "11na-ht40"; 1913 case MODE_11NG_HT40: 1914 return "11ng-ht40"; 1915 case MODE_11AC_VHT20: 1916 return "11ac-vht20"; 1917 case MODE_11AC_VHT40: 1918 return "11ac-vht40"; 1919 case MODE_11AC_VHT80: 1920 return "11ac-vht80"; 1921 case MODE_11AC_VHT160: 1922 return "11ac-vht160"; 1923 case MODE_11AC_VHT80_80: 1924 return "11ac-vht80+80"; 1925 case MODE_11AC_VHT20_2G: 1926 return "11ac-vht20-2g"; 1927 case MODE_11AC_VHT40_2G: 1928 return "11ac-vht40-2g"; 1929 case MODE_11AC_VHT80_2G: 1930 return "11ac-vht80-2g"; 1931 case MODE_UNKNOWN: 1932 /* skip */ 1933 break; 1934 1935 /* no default handler to allow compiler to check that the 1936 * enum is fully handled 1937 */ 1938 }; 1939 1940 return "<unknown>"; 1941 } 1942 1943 #define WMI_CHAN_LIST_TAG 0x1 1944 #define WMI_SSID_LIST_TAG 0x2 1945 #define WMI_BSSID_LIST_TAG 0x3 1946 #define WMI_IE_TAG 0x4 1947 1948 struct wmi_channel { 1949 __le32 mhz; 1950 __le32 band_center_freq1; 1951 __le32 band_center_freq2; /* valid for 11ac, 80plus80 */ 1952 union { 1953 __le32 flags; /* WMI_CHAN_FLAG_ */ 1954 struct { 1955 u8 mode; /* only 6 LSBs */ 1956 } __packed; 1957 } __packed; 1958 union { 1959 __le32 reginfo0; 1960 struct { 1961 /* note: power unit is 0.5 dBm */ 1962 u8 min_power; 1963 u8 max_power; 1964 u8 reg_power; 1965 u8 reg_classid; 1966 } __packed; 1967 } __packed; 1968 union { 1969 __le32 reginfo1; 1970 struct { 1971 u8 antenna_max; 1972 u8 max_tx_power; 1973 } __packed; 1974 } __packed; 1975 } __packed; 1976 1977 struct wmi_channel_arg { 1978 u32 freq; 1979 u32 band_center_freq1; 1980 u32 band_center_freq2; 1981 bool passive; 1982 bool allow_ibss; 1983 bool allow_ht; 1984 bool allow_vht; 1985 bool ht40plus; 1986 bool chan_radar; 1987 /* note: power unit is 0.5 dBm */ 1988 u32 min_power; 1989 u32 max_power; 1990 u32 max_reg_power; 1991 u32 max_antenna_gain; 1992 u32 reg_class_id; 1993 enum wmi_phy_mode mode; 1994 }; 1995 1996 enum wmi_channel_change_cause { 1997 WMI_CHANNEL_CHANGE_CAUSE_NONE = 0, 1998 WMI_CHANNEL_CHANGE_CAUSE_CSA, 1999 }; 2000 2001 #define WMI_CHAN_FLAG_HT40_PLUS (1 << 6) 2002 #define WMI_CHAN_FLAG_PASSIVE (1 << 7) 2003 #define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8) 2004 #define WMI_CHAN_FLAG_AP_DISABLED (1 << 9) 2005 #define WMI_CHAN_FLAG_DFS (1 << 10) 2006 #define WMI_CHAN_FLAG_ALLOW_HT (1 << 11) 2007 #define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12) 2008 2009 /* Indicate reason for channel switch */ 2010 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13) 2011 2012 #define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */ 2013 2014 /* HT Capabilities*/ 2015 #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ 2016 #define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */ 2017 #define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ 2018 #define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ 2019 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3 2020 #define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ 2021 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4 2022 #define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */ 2023 #define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ 2024 #define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ 2025 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 2026 #define WMI_HT_CAP_HT40_SGI 0x0800 2027 2028 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \ 2029 WMI_HT_CAP_HT20_SGI | \ 2030 WMI_HT_CAP_HT40_SGI | \ 2031 WMI_HT_CAP_TX_STBC | \ 2032 WMI_HT_CAP_RX_STBC | \ 2033 WMI_HT_CAP_LDPC) 2034 2035 /* 2036 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information 2037 * field. The fields not defined here are not supported, or reserved. 2038 * Do not change these masks and if you have to add new one follow the 2039 * bitmask as specified by 802.11ac draft. 2040 */ 2041 2042 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 2043 #define WMI_VHT_CAP_RX_LDPC 0x00000010 2044 #define WMI_VHT_CAP_SGI_80MHZ 0x00000020 2045 #define WMI_VHT_CAP_SGI_160MHZ 0x00000040 2046 #define WMI_VHT_CAP_TX_STBC 0x00000080 2047 #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300 2048 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8 2049 #define WMI_VHT_CAP_SU_BFER 0x00000800 2050 #define WMI_VHT_CAP_SU_BFEE 0x00001000 2051 #define WMI_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000 2052 #define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13 2053 #define WMI_VHT_CAP_MAX_SND_DIM_MASK 0x00070000 2054 #define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16 2055 #define WMI_VHT_CAP_MU_BFER 0x00080000 2056 #define WMI_VHT_CAP_MU_BFEE 0x00100000 2057 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 2058 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23 2059 #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000 2060 #define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000 2061 2062 /* The following also refer for max HT AMSDU */ 2063 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000 2064 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001 2065 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 2066 2067 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \ 2068 WMI_VHT_CAP_RX_LDPC | \ 2069 WMI_VHT_CAP_SGI_80MHZ | \ 2070 WMI_VHT_CAP_TX_STBC | \ 2071 WMI_VHT_CAP_RX_STBC_MASK | \ 2072 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \ 2073 WMI_VHT_CAP_RX_FIXED_ANT | \ 2074 WMI_VHT_CAP_TX_FIXED_ANT) 2075 2076 /* 2077 * Interested readers refer to Rx/Tx MCS Map definition as defined in 2078 * 802.11ac 2079 */ 2080 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) 2081 #define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 2082 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 2083 2084 enum { 2085 REGDMN_MODE_11A = 0x00001, /* 11a channels */ 2086 REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */ 2087 REGDMN_MODE_11B = 0x00004, /* 11b channels */ 2088 REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */ 2089 REGDMN_MODE_11G = 0x00008, /* XXX historical */ 2090 REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */ 2091 REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */ 2092 REGDMN_MODE_XR = 0x00100, /* XR channels */ 2093 REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */ 2094 REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */ 2095 REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */ 2096 REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */ 2097 REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */ 2098 REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */ 2099 REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */ 2100 REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */ 2101 REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */ 2102 REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */ 2103 REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */ 2104 REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */ 2105 REGDMN_MODE_11AC_VHT160 = 0x200000, /* 5Ghz, VHT160 channels */ 2106 REGDMN_MODE_11AC_VHT80_80 = 0x400000, /* 5Ghz, VHT80+80 channels */ 2107 REGDMN_MODE_ALL = 0xffffffff 2108 }; 2109 2110 #define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001 2111 #define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002 2112 #define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004 2113 2114 /* regulatory capabilities */ 2115 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040 2116 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080 2117 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100 2118 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200 2119 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400 2120 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800 2121 2122 struct hal_reg_capabilities { 2123 /* regdomain value specified in EEPROM */ 2124 __le32 eeprom_rd; 2125 /*regdomain */ 2126 __le32 eeprom_rd_ext; 2127 /* CAP1 capabilities bit map. */ 2128 __le32 regcap1; 2129 /* REGDMN EEPROM CAP. */ 2130 __le32 regcap2; 2131 /* REGDMN MODE */ 2132 __le32 wireless_modes; 2133 __le32 low_2ghz_chan; 2134 __le32 high_2ghz_chan; 2135 __le32 low_5ghz_chan; 2136 __le32 high_5ghz_chan; 2137 } __packed; 2138 2139 enum wlan_mode_capability { 2140 WHAL_WLAN_11A_CAPABILITY = 0x1, 2141 WHAL_WLAN_11G_CAPABILITY = 0x2, 2142 WHAL_WLAN_11AG_CAPABILITY = 0x3, 2143 }; 2144 2145 /* structure used by FW for requesting host memory */ 2146 struct wlan_host_mem_req { 2147 /* ID of the request */ 2148 __le32 req_id; 2149 /* size of the of each unit */ 2150 __le32 unit_size; 2151 /* flags to indicate that 2152 * the number units is dependent 2153 * on number of resources(num vdevs num peers .. etc) 2154 */ 2155 __le32 num_unit_info; 2156 /* 2157 * actual number of units to allocate . if flags in the num_unit_info 2158 * indicate that number of units is tied to number of a particular 2159 * resource to allocate then num_units filed is set to 0 and host 2160 * will derive the number units from number of the resources it is 2161 * requesting. 2162 */ 2163 __le32 num_units; 2164 } __packed; 2165 2166 /* 2167 * The following struct holds optional payload for 2168 * wmi_service_ready_event,e.g., 11ac pass some of the 2169 * device capability to the host. 2170 */ 2171 struct wmi_service_ready_event { 2172 __le32 sw_version; 2173 __le32 sw_version_1; 2174 __le32 abi_version; 2175 /* WMI_PHY_CAPABILITY */ 2176 __le32 phy_capability; 2177 /* Maximum number of frag table entries that SW will populate less 1 */ 2178 __le32 max_frag_entry; 2179 __le32 wmi_service_bitmap[16]; 2180 __le32 num_rf_chains; 2181 /* 2182 * The following field is only valid for service type 2183 * WMI_SERVICE_11AC 2184 */ 2185 __le32 ht_cap_info; /* WMI HT Capability */ 2186 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2187 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2188 __le32 hw_min_tx_power; 2189 __le32 hw_max_tx_power; 2190 struct hal_reg_capabilities hal_reg_capabilities; 2191 __le32 sys_cap_info; 2192 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2193 /* 2194 * Max beacon and Probe Response IE offload size 2195 * (includes optional P2P IEs) 2196 */ 2197 __le32 max_bcn_ie_size; 2198 /* 2199 * request to host to allocate a chuck of memory and pss it down to FW 2200 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2201 * data structures. Only valid for low latency interfaces like PCIE 2202 * where FW can access this memory directly (or) by DMA. 2203 */ 2204 __le32 num_mem_reqs; 2205 struct wlan_host_mem_req mem_reqs[0]; 2206 } __packed; 2207 2208 /* This is the definition from 10.X firmware branch */ 2209 struct wmi_10x_service_ready_event { 2210 __le32 sw_version; 2211 __le32 abi_version; 2212 2213 /* WMI_PHY_CAPABILITY */ 2214 __le32 phy_capability; 2215 2216 /* Maximum number of frag table entries that SW will populate less 1 */ 2217 __le32 max_frag_entry; 2218 __le32 wmi_service_bitmap[16]; 2219 __le32 num_rf_chains; 2220 2221 /* 2222 * The following field is only valid for service type 2223 * WMI_SERVICE_11AC 2224 */ 2225 __le32 ht_cap_info; /* WMI HT Capability */ 2226 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2227 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2228 __le32 hw_min_tx_power; 2229 __le32 hw_max_tx_power; 2230 2231 struct hal_reg_capabilities hal_reg_capabilities; 2232 2233 __le32 sys_cap_info; 2234 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2235 2236 /* 2237 * request to host to allocate a chuck of memory and pss it down to FW 2238 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2239 * data structures. Only valid for low latency interfaces like PCIE 2240 * where FW can access this memory directly (or) by DMA. 2241 */ 2242 __le32 num_mem_reqs; 2243 2244 struct wlan_host_mem_req mem_reqs[0]; 2245 } __packed; 2246 2247 #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ) 2248 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ) 2249 2250 struct wmi_ready_event { 2251 __le32 sw_version; 2252 __le32 abi_version; 2253 struct wmi_mac_addr mac_addr; 2254 __le32 status; 2255 } __packed; 2256 2257 struct wmi_resource_config { 2258 /* number of virtual devices (VAPs) to support */ 2259 __le32 num_vdevs; 2260 2261 /* number of peer nodes to support */ 2262 __le32 num_peers; 2263 2264 /* 2265 * In offload mode target supports features like WOW, chatter and 2266 * other protocol offloads. In order to support them some 2267 * functionalities like reorder buffering, PN checking need to be 2268 * done in target. This determines maximum number of peers supported 2269 * by target in offload mode 2270 */ 2271 __le32 num_offload_peers; 2272 2273 /* For target-based RX reordering */ 2274 __le32 num_offload_reorder_bufs; 2275 2276 /* number of keys per peer */ 2277 __le32 num_peer_keys; 2278 2279 /* total number of TX/RX data TIDs */ 2280 __le32 num_tids; 2281 2282 /* 2283 * max skid for resolving hash collisions 2284 * 2285 * The address search table is sparse, so that if two MAC addresses 2286 * result in the same hash value, the second of these conflicting 2287 * entries can slide to the next index in the address search table, 2288 * and use it, if it is unoccupied. This ast_skid_limit parameter 2289 * specifies the upper bound on how many subsequent indices to search 2290 * over to find an unoccupied space. 2291 */ 2292 __le32 ast_skid_limit; 2293 2294 /* 2295 * the nominal chain mask for transmit 2296 * 2297 * The chain mask may be modified dynamically, e.g. to operate AP 2298 * tx with a reduced number of chains if no clients are associated. 2299 * This configuration parameter specifies the nominal chain-mask that 2300 * should be used when not operating with a reduced set of tx chains. 2301 */ 2302 __le32 tx_chain_mask; 2303 2304 /* 2305 * the nominal chain mask for receive 2306 * 2307 * The chain mask may be modified dynamically, e.g. for a client 2308 * to use a reduced number of chains for receive if the traffic to 2309 * the client is low enough that it doesn't require downlink MIMO 2310 * or antenna diversity. 2311 * This configuration parameter specifies the nominal chain-mask that 2312 * should be used when not operating with a reduced set of rx chains. 2313 */ 2314 __le32 rx_chain_mask; 2315 2316 /* 2317 * what rx reorder timeout (ms) to use for the AC 2318 * 2319 * Each WMM access class (voice, video, best-effort, background) will 2320 * have its own timeout value to dictate how long to wait for missing 2321 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2322 * already been received. 2323 * This parameter specifies the timeout in milliseconds for each 2324 * class. 2325 */ 2326 __le32 rx_timeout_pri_vi; 2327 __le32 rx_timeout_pri_vo; 2328 __le32 rx_timeout_pri_be; 2329 __le32 rx_timeout_pri_bk; 2330 2331 /* 2332 * what mode the rx should decap packets to 2333 * 2334 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2335 * THis setting also determines the default TX behavior, however TX 2336 * behavior can be modified on a per VAP basis during VAP init 2337 */ 2338 __le32 rx_decap_mode; 2339 2340 /* what is the maximum number of scan requests that can be queued */ 2341 __le32 scan_max_pending_reqs; 2342 2343 /* maximum VDEV that could use BMISS offload */ 2344 __le32 bmiss_offload_max_vdev; 2345 2346 /* maximum VDEV that could use offload roaming */ 2347 __le32 roam_offload_max_vdev; 2348 2349 /* maximum AP profiles that would push to offload roaming */ 2350 __le32 roam_offload_max_ap_profiles; 2351 2352 /* 2353 * how many groups to use for mcast->ucast conversion 2354 * 2355 * The target's WAL maintains a table to hold information regarding 2356 * which peers belong to a given multicast group, so that if 2357 * multicast->unicast conversion is enabled, the target can convert 2358 * multicast tx frames to a series of unicast tx frames, to each 2359 * peer within the multicast group. 2360 This num_mcast_groups configuration parameter tells the target how 2361 * many multicast groups to provide storage for within its multicast 2362 * group membership table. 2363 */ 2364 __le32 num_mcast_groups; 2365 2366 /* 2367 * size to alloc for the mcast membership table 2368 * 2369 * This num_mcast_table_elems configuration parameter tells the 2370 * target how many peer elements it needs to provide storage for in 2371 * its multicast group membership table. 2372 * These multicast group membership table elements are shared by the 2373 * multicast groups stored within the table. 2374 */ 2375 __le32 num_mcast_table_elems; 2376 2377 /* 2378 * whether/how to do multicast->unicast conversion 2379 * 2380 * This configuration parameter specifies whether the target should 2381 * perform multicast --> unicast conversion on transmit, and if so, 2382 * what to do if it finds no entries in its multicast group 2383 * membership table for the multicast IP address in the tx frame. 2384 * Configuration value: 2385 * 0 -> Do not perform multicast to unicast conversion. 2386 * 1 -> Convert multicast frames to unicast, if the IP multicast 2387 * address from the tx frame is found in the multicast group 2388 * membership table. If the IP multicast address is not found, 2389 * drop the frame. 2390 * 2 -> Convert multicast frames to unicast, if the IP multicast 2391 * address from the tx frame is found in the multicast group 2392 * membership table. If the IP multicast address is not found, 2393 * transmit the frame as multicast. 2394 */ 2395 __le32 mcast2ucast_mode; 2396 2397 /* 2398 * how much memory to allocate for a tx PPDU dbg log 2399 * 2400 * This parameter controls how much memory the target will allocate 2401 * to store a log of tx PPDU meta-information (how large the PPDU 2402 * was, when it was sent, whether it was successful, etc.) 2403 */ 2404 __le32 tx_dbg_log_size; 2405 2406 /* how many AST entries to be allocated for WDS */ 2407 __le32 num_wds_entries; 2408 2409 /* 2410 * MAC DMA burst size, e.g., For target PCI limit can be 2411 * 0 -default, 1 256B 2412 */ 2413 __le32 dma_burst_size; 2414 2415 /* 2416 * Fixed delimiters to be inserted after every MPDU to 2417 * account for interface latency to avoid underrun. 2418 */ 2419 __le32 mac_aggr_delim; 2420 2421 /* 2422 * determine whether target is responsible for detecting duplicate 2423 * non-aggregate MPDU and timing out stale fragments. 2424 * 2425 * A-MPDU reordering is always performed on the target. 2426 * 2427 * 0: target responsible for frag timeout and dup checking 2428 * 1: host responsible for frag timeout and dup checking 2429 */ 2430 __le32 rx_skip_defrag_timeout_dup_detection_check; 2431 2432 /* 2433 * Configuration for VoW : 2434 * No of Video Nodes to be supported 2435 * and Max no of descriptors for each Video link (node). 2436 */ 2437 __le32 vow_config; 2438 2439 /* maximum VDEV that could use GTK offload */ 2440 __le32 gtk_offload_max_vdev; 2441 2442 /* Number of msdu descriptors target should use */ 2443 __le32 num_msdu_desc; 2444 2445 /* 2446 * Max. number of Tx fragments per MSDU 2447 * This parameter controls the max number of Tx fragments per MSDU. 2448 * This is sent by the target as part of the WMI_SERVICE_READY event 2449 * and is overridden by the OS shim as required. 2450 */ 2451 __le32 max_frag_entries; 2452 } __packed; 2453 2454 struct wmi_resource_config_10x { 2455 /* number of virtual devices (VAPs) to support */ 2456 __le32 num_vdevs; 2457 2458 /* number of peer nodes to support */ 2459 __le32 num_peers; 2460 2461 /* number of keys per peer */ 2462 __le32 num_peer_keys; 2463 2464 /* total number of TX/RX data TIDs */ 2465 __le32 num_tids; 2466 2467 /* 2468 * max skid for resolving hash collisions 2469 * 2470 * The address search table is sparse, so that if two MAC addresses 2471 * result in the same hash value, the second of these conflicting 2472 * entries can slide to the next index in the address search table, 2473 * and use it, if it is unoccupied. This ast_skid_limit parameter 2474 * specifies the upper bound on how many subsequent indices to search 2475 * over to find an unoccupied space. 2476 */ 2477 __le32 ast_skid_limit; 2478 2479 /* 2480 * the nominal chain mask for transmit 2481 * 2482 * The chain mask may be modified dynamically, e.g. to operate AP 2483 * tx with a reduced number of chains if no clients are associated. 2484 * This configuration parameter specifies the nominal chain-mask that 2485 * should be used when not operating with a reduced set of tx chains. 2486 */ 2487 __le32 tx_chain_mask; 2488 2489 /* 2490 * the nominal chain mask for receive 2491 * 2492 * The chain mask may be modified dynamically, e.g. for a client 2493 * to use a reduced number of chains for receive if the traffic to 2494 * the client is low enough that it doesn't require downlink MIMO 2495 * or antenna diversity. 2496 * This configuration parameter specifies the nominal chain-mask that 2497 * should be used when not operating with a reduced set of rx chains. 2498 */ 2499 __le32 rx_chain_mask; 2500 2501 /* 2502 * what rx reorder timeout (ms) to use for the AC 2503 * 2504 * Each WMM access class (voice, video, best-effort, background) will 2505 * have its own timeout value to dictate how long to wait for missing 2506 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2507 * already been received. 2508 * This parameter specifies the timeout in milliseconds for each 2509 * class. 2510 */ 2511 __le32 rx_timeout_pri_vi; 2512 __le32 rx_timeout_pri_vo; 2513 __le32 rx_timeout_pri_be; 2514 __le32 rx_timeout_pri_bk; 2515 2516 /* 2517 * what mode the rx should decap packets to 2518 * 2519 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2520 * THis setting also determines the default TX behavior, however TX 2521 * behavior can be modified on a per VAP basis during VAP init 2522 */ 2523 __le32 rx_decap_mode; 2524 2525 /* what is the maximum number of scan requests that can be queued */ 2526 __le32 scan_max_pending_reqs; 2527 2528 /* maximum VDEV that could use BMISS offload */ 2529 __le32 bmiss_offload_max_vdev; 2530 2531 /* maximum VDEV that could use offload roaming */ 2532 __le32 roam_offload_max_vdev; 2533 2534 /* maximum AP profiles that would push to offload roaming */ 2535 __le32 roam_offload_max_ap_profiles; 2536 2537 /* 2538 * how many groups to use for mcast->ucast conversion 2539 * 2540 * The target's WAL maintains a table to hold information regarding 2541 * which peers belong to a given multicast group, so that if 2542 * multicast->unicast conversion is enabled, the target can convert 2543 * multicast tx frames to a series of unicast tx frames, to each 2544 * peer within the multicast group. 2545 This num_mcast_groups configuration parameter tells the target how 2546 * many multicast groups to provide storage for within its multicast 2547 * group membership table. 2548 */ 2549 __le32 num_mcast_groups; 2550 2551 /* 2552 * size to alloc for the mcast membership table 2553 * 2554 * This num_mcast_table_elems configuration parameter tells the 2555 * target how many peer elements it needs to provide storage for in 2556 * its multicast group membership table. 2557 * These multicast group membership table elements are shared by the 2558 * multicast groups stored within the table. 2559 */ 2560 __le32 num_mcast_table_elems; 2561 2562 /* 2563 * whether/how to do multicast->unicast conversion 2564 * 2565 * This configuration parameter specifies whether the target should 2566 * perform multicast --> unicast conversion on transmit, and if so, 2567 * what to do if it finds no entries in its multicast group 2568 * membership table for the multicast IP address in the tx frame. 2569 * Configuration value: 2570 * 0 -> Do not perform multicast to unicast conversion. 2571 * 1 -> Convert multicast frames to unicast, if the IP multicast 2572 * address from the tx frame is found in the multicast group 2573 * membership table. If the IP multicast address is not found, 2574 * drop the frame. 2575 * 2 -> Convert multicast frames to unicast, if the IP multicast 2576 * address from the tx frame is found in the multicast group 2577 * membership table. If the IP multicast address is not found, 2578 * transmit the frame as multicast. 2579 */ 2580 __le32 mcast2ucast_mode; 2581 2582 /* 2583 * how much memory to allocate for a tx PPDU dbg log 2584 * 2585 * This parameter controls how much memory the target will allocate 2586 * to store a log of tx PPDU meta-information (how large the PPDU 2587 * was, when it was sent, whether it was successful, etc.) 2588 */ 2589 __le32 tx_dbg_log_size; 2590 2591 /* how many AST entries to be allocated for WDS */ 2592 __le32 num_wds_entries; 2593 2594 /* 2595 * MAC DMA burst size, e.g., For target PCI limit can be 2596 * 0 -default, 1 256B 2597 */ 2598 __le32 dma_burst_size; 2599 2600 /* 2601 * Fixed delimiters to be inserted after every MPDU to 2602 * account for interface latency to avoid underrun. 2603 */ 2604 __le32 mac_aggr_delim; 2605 2606 /* 2607 * determine whether target is responsible for detecting duplicate 2608 * non-aggregate MPDU and timing out stale fragments. 2609 * 2610 * A-MPDU reordering is always performed on the target. 2611 * 2612 * 0: target responsible for frag timeout and dup checking 2613 * 1: host responsible for frag timeout and dup checking 2614 */ 2615 __le32 rx_skip_defrag_timeout_dup_detection_check; 2616 2617 /* 2618 * Configuration for VoW : 2619 * No of Video Nodes to be supported 2620 * and Max no of descriptors for each Video link (node). 2621 */ 2622 __le32 vow_config; 2623 2624 /* Number of msdu descriptors target should use */ 2625 __le32 num_msdu_desc; 2626 2627 /* 2628 * Max. number of Tx fragments per MSDU 2629 * This parameter controls the max number of Tx fragments per MSDU. 2630 * This is sent by the target as part of the WMI_SERVICE_READY event 2631 * and is overridden by the OS shim as required. 2632 */ 2633 __le32 max_frag_entries; 2634 } __packed; 2635 2636 enum wmi_10_2_feature_mask { 2637 WMI_10_2_RX_BATCH_MODE = BIT(0), 2638 WMI_10_2_ATF_CONFIG = BIT(1), 2639 WMI_10_2_COEX_GPIO = BIT(3), 2640 WMI_10_2_BSS_CHAN_INFO = BIT(6), 2641 WMI_10_2_PEER_STATS = BIT(7), 2642 }; 2643 2644 struct wmi_resource_config_10_2 { 2645 struct wmi_resource_config_10x common; 2646 __le32 max_peer_ext_stats; 2647 __le32 smart_ant_cap; /* 0-disable, 1-enable */ 2648 __le32 bk_min_free; 2649 __le32 be_min_free; 2650 __le32 vi_min_free; 2651 __le32 vo_min_free; 2652 __le32 feature_mask; 2653 } __packed; 2654 2655 #define NUM_UNITS_IS_NUM_VDEVS BIT(0) 2656 #define NUM_UNITS_IS_NUM_PEERS BIT(1) 2657 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2) 2658 2659 struct wmi_resource_config_10_4 { 2660 /* Number of virtual devices (VAPs) to support */ 2661 __le32 num_vdevs; 2662 2663 /* Number of peer nodes to support */ 2664 __le32 num_peers; 2665 2666 /* Number of active peer nodes to support */ 2667 __le32 num_active_peers; 2668 2669 /* In offload mode, target supports features like WOW, chatter and other 2670 * protocol offloads. In order to support them some functionalities like 2671 * reorder buffering, PN checking need to be done in target. 2672 * This determines maximum number of peers supported by target in 2673 * offload mode. 2674 */ 2675 __le32 num_offload_peers; 2676 2677 /* Number of reorder buffers available for doing target based reorder 2678 * Rx reorder buffering 2679 */ 2680 __le32 num_offload_reorder_buffs; 2681 2682 /* Number of keys per peer */ 2683 __le32 num_peer_keys; 2684 2685 /* Total number of TX/RX data TIDs */ 2686 __le32 num_tids; 2687 2688 /* Max skid for resolving hash collisions. 2689 * The address search table is sparse, so that if two MAC addresses 2690 * result in the same hash value, the second of these conflicting 2691 * entries can slide to the next index in the address search table, 2692 * and use it, if it is unoccupied. This ast_skid_limit parameter 2693 * specifies the upper bound on how many subsequent indices to search 2694 * over to find an unoccupied space. 2695 */ 2696 __le32 ast_skid_limit; 2697 2698 /* The nominal chain mask for transmit. 2699 * The chain mask may be modified dynamically, e.g. to operate AP tx 2700 * with a reduced number of chains if no clients are associated. 2701 * This configuration parameter specifies the nominal chain-mask that 2702 * should be used when not operating with a reduced set of tx chains. 2703 */ 2704 __le32 tx_chain_mask; 2705 2706 /* The nominal chain mask for receive. 2707 * The chain mask may be modified dynamically, e.g. for a client to use 2708 * a reduced number of chains for receive if the traffic to the client 2709 * is low enough that it doesn't require downlink MIMO or antenna 2710 * diversity. This configuration parameter specifies the nominal 2711 * chain-mask that should be used when not operating with a reduced 2712 * set of rx chains. 2713 */ 2714 __le32 rx_chain_mask; 2715 2716 /* What rx reorder timeout (ms) to use for the AC. 2717 * Each WMM access class (voice, video, best-effort, background) will 2718 * have its own timeout value to dictate how long to wait for missing 2719 * rx MPDUs to arrive before flushing subsequent MPDUs that have already 2720 * been received. This parameter specifies the timeout in milliseconds 2721 * for each class. 2722 */ 2723 __le32 rx_timeout_pri[4]; 2724 2725 /* What mode the rx should decap packets to. 2726 * MAC can decap to RAW (no decap), native wifi or Ethernet types. 2727 * This setting also determines the default TX behavior, however TX 2728 * behavior can be modified on a per VAP basis during VAP init 2729 */ 2730 __le32 rx_decap_mode; 2731 2732 __le32 scan_max_pending_req; 2733 2734 __le32 bmiss_offload_max_vdev; 2735 2736 __le32 roam_offload_max_vdev; 2737 2738 __le32 roam_offload_max_ap_profiles; 2739 2740 /* How many groups to use for mcast->ucast conversion. 2741 * The target's WAL maintains a table to hold information regarding 2742 * which peers belong to a given multicast group, so that if 2743 * multicast->unicast conversion is enabled, the target can convert 2744 * multicast tx frames to a series of unicast tx frames, to each peer 2745 * within the multicast group. This num_mcast_groups configuration 2746 * parameter tells the target how many multicast groups to provide 2747 * storage for within its multicast group membership table. 2748 */ 2749 __le32 num_mcast_groups; 2750 2751 /* Size to alloc for the mcast membership table. 2752 * This num_mcast_table_elems configuration parameter tells the target 2753 * how many peer elements it needs to provide storage for in its 2754 * multicast group membership table. These multicast group membership 2755 * table elements are shared by the multicast groups stored within 2756 * the table. 2757 */ 2758 __le32 num_mcast_table_elems; 2759 2760 /* Whether/how to do multicast->unicast conversion. 2761 * This configuration parameter specifies whether the target should 2762 * perform multicast --> unicast conversion on transmit, and if so, 2763 * what to do if it finds no entries in its multicast group membership 2764 * table for the multicast IP address in the tx frame. 2765 * Configuration value: 2766 * 0 -> Do not perform multicast to unicast conversion. 2767 * 1 -> Convert multicast frames to unicast, if the IP multicast address 2768 * from the tx frame is found in the multicast group membership 2769 * table. If the IP multicast address is not found, drop the frame 2770 * 2 -> Convert multicast frames to unicast, if the IP multicast address 2771 * from the tx frame is found in the multicast group membership 2772 * table. If the IP multicast address is not found, transmit the 2773 * frame as multicast. 2774 */ 2775 __le32 mcast2ucast_mode; 2776 2777 /* How much memory to allocate for a tx PPDU dbg log. 2778 * This parameter controls how much memory the target will allocate to 2779 * store a log of tx PPDU meta-information (how large the PPDU was, 2780 * when it was sent, whether it was successful, etc.) 2781 */ 2782 __le32 tx_dbg_log_size; 2783 2784 /* How many AST entries to be allocated for WDS */ 2785 __le32 num_wds_entries; 2786 2787 /* MAC DMA burst size. 0 -default, 1 -256B */ 2788 __le32 dma_burst_size; 2789 2790 /* Fixed delimiters to be inserted after every MPDU to account for 2791 * interface latency to avoid underrun. 2792 */ 2793 __le32 mac_aggr_delim; 2794 2795 /* Determine whether target is responsible for detecting duplicate 2796 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering 2797 * is always performed on the target. 2798 * 2799 * 0: target responsible for frag timeout and dup checking 2800 * 1: host responsible for frag timeout and dup checking 2801 */ 2802 __le32 rx_skip_defrag_timeout_dup_detection_check; 2803 2804 /* Configuration for VoW : No of Video nodes to be supported and max 2805 * no of descriptors for each video link (node). 2806 */ 2807 __le32 vow_config; 2808 2809 /* Maximum vdev that could use gtk offload */ 2810 __le32 gtk_offload_max_vdev; 2811 2812 /* Number of msdu descriptors target should use */ 2813 __le32 num_msdu_desc; 2814 2815 /* Max number of tx fragments per MSDU. 2816 * This parameter controls the max number of tx fragments per MSDU. 2817 * This will passed by target as part of the WMI_SERVICE_READY event 2818 * and is overridden by the OS shim as required. 2819 */ 2820 __le32 max_frag_entries; 2821 2822 /* Max number of extended peer stats. 2823 * This parameter controls the max number of peers for which extended 2824 * statistics are supported by target 2825 */ 2826 __le32 max_peer_ext_stats; 2827 2828 /* Smart antenna capabilities information. 2829 * 1 - Smart antenna is enabled 2830 * 0 - Smart antenna is disabled 2831 * In future this can contain smart antenna specific capabilities. 2832 */ 2833 __le32 smart_ant_cap; 2834 2835 /* User can configure the buffers allocated for each AC (BE, BK, VI, VO) 2836 * during init. 2837 */ 2838 __le32 bk_minfree; 2839 __le32 be_minfree; 2840 __le32 vi_minfree; 2841 __le32 vo_minfree; 2842 2843 /* Rx batch mode capability. 2844 * 1 - Rx batch mode enabled 2845 * 0 - Rx batch mode disabled 2846 */ 2847 __le32 rx_batchmode; 2848 2849 /* Thermal throttling capability. 2850 * 1 - Capable of thermal throttling 2851 * 0 - Not capable of thermal throttling 2852 */ 2853 __le32 tt_support; 2854 2855 /* ATF configuration. 2856 * 1 - Enable ATF 2857 * 0 - Disable ATF 2858 */ 2859 __le32 atf_config; 2860 2861 /* Configure padding to manage IP header un-alignment 2862 * 1 - Enable padding 2863 * 0 - Disable padding 2864 */ 2865 __le32 iphdr_pad_config; 2866 2867 /* qwrap configuration (bits 15-0) 2868 * 1 - This is qwrap configuration 2869 * 0 - This is not qwrap 2870 * 2871 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables) 2872 * In order to get ack-RSSI reporting and to specify the tx-rate for 2873 * individual frames, this option must be enabled. This uses an extra 2874 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it. 2875 */ 2876 __le32 qwrap_config; 2877 } __packed; 2878 2879 enum wmi_coex_version { 2880 WMI_NO_COEX_VERSION_SUPPORT = 0, 2881 /* 3 wire coex support*/ 2882 WMI_COEX_VERSION_1 = 1, 2883 /* 2.5 wire coex support*/ 2884 WMI_COEX_VERSION_2 = 2, 2885 /* 2.5 wire coex with duty cycle support */ 2886 WMI_COEX_VERSION_3 = 3, 2887 /* 4 wire coex support*/ 2888 WMI_COEX_VERSION_4 = 4, 2889 }; 2890 2891 /** 2892 * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags 2893 * @WMI_10_4_LTEU_SUPPORT: LTEU config 2894 * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config 2895 * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan 2896 * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan 2897 * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats 2898 * @WMI_10_4_PEER_STATS: Per station stats 2899 * @WMI_10_4_VDEV_STATS: Per vdev stats 2900 * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable 2901 * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable 2902 * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable 2903 * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable 2904 * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host 2905 * enable/disable 2906 * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY:Explicit TDLS mode enable/disable 2907 */ 2908 enum wmi_10_4_feature_mask { 2909 WMI_10_4_LTEU_SUPPORT = BIT(0), 2910 WMI_10_4_COEX_GPIO_SUPPORT = BIT(1), 2911 WMI_10_4_AUX_RADIO_SPECTRAL_INTF = BIT(2), 2912 WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF = BIT(3), 2913 WMI_10_4_BSS_CHANNEL_INFO_64 = BIT(4), 2914 WMI_10_4_PEER_STATS = BIT(5), 2915 WMI_10_4_VDEV_STATS = BIT(6), 2916 WMI_10_4_TDLS = BIT(7), 2917 WMI_10_4_TDLS_OFFCHAN = BIT(8), 2918 WMI_10_4_TDLS_UAPSD_BUFFER_STA = BIT(9), 2919 WMI_10_4_TDLS_UAPSD_SLEEP_STA = BIT(10), 2920 WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11), 2921 WMI_10_4_TDLS_EXPLICIT_MODE_ONLY = BIT(12), 2922 2923 }; 2924 2925 struct wmi_ext_resource_config_10_4_cmd { 2926 /* contains enum wmi_host_platform_type */ 2927 __le32 host_platform_config; 2928 /* see enum wmi_10_4_feature_mask */ 2929 __le32 fw_feature_bitmap; 2930 /* WLAN priority GPIO number */ 2931 __le32 wlan_gpio_priority; 2932 /* see enum wmi_coex_version */ 2933 __le32 coex_version; 2934 /* COEX GPIO config */ 2935 __le32 coex_gpio_pin1; 2936 __le32 coex_gpio_pin2; 2937 __le32 coex_gpio_pin3; 2938 /* number of vdevs allowed to perform tdls */ 2939 __le32 num_tdls_vdevs; 2940 /* number of peers to track per TDLS vdev */ 2941 __le32 num_tdls_conn_table_entries; 2942 /* number of tdls sleep sta supported */ 2943 __le32 max_tdls_concurrent_sleep_sta; 2944 /* number of tdls buffer sta supported */ 2945 __le32 max_tdls_concurrent_buffer_sta; 2946 }; 2947 2948 /* structure describing host memory chunk. */ 2949 struct host_memory_chunk { 2950 /* id of the request that is passed up in service ready */ 2951 __le32 req_id; 2952 /* the physical address the memory chunk */ 2953 __le32 ptr; 2954 /* size of the chunk */ 2955 __le32 size; 2956 } __packed; 2957 2958 struct wmi_host_mem_chunks { 2959 __le32 count; 2960 /* some fw revisions require at least 1 chunk regardless of count */ 2961 struct host_memory_chunk items[1]; 2962 } __packed; 2963 2964 struct wmi_init_cmd { 2965 struct wmi_resource_config resource_config; 2966 struct wmi_host_mem_chunks mem_chunks; 2967 } __packed; 2968 2969 /* _10x structure is from 10.X FW API */ 2970 struct wmi_init_cmd_10x { 2971 struct wmi_resource_config_10x resource_config; 2972 struct wmi_host_mem_chunks mem_chunks; 2973 } __packed; 2974 2975 struct wmi_init_cmd_10_2 { 2976 struct wmi_resource_config_10_2 resource_config; 2977 struct wmi_host_mem_chunks mem_chunks; 2978 } __packed; 2979 2980 struct wmi_init_cmd_10_4 { 2981 struct wmi_resource_config_10_4 resource_config; 2982 struct wmi_host_mem_chunks mem_chunks; 2983 } __packed; 2984 2985 struct wmi_chan_list_entry { 2986 __le16 freq; 2987 u8 phy_mode; /* valid for 10.2 only */ 2988 u8 reserved; 2989 } __packed; 2990 2991 /* TLV for channel list */ 2992 struct wmi_chan_list { 2993 __le32 tag; /* WMI_CHAN_LIST_TAG */ 2994 __le32 num_chan; 2995 struct wmi_chan_list_entry channel_list[0]; 2996 } __packed; 2997 2998 struct wmi_bssid_list { 2999 __le32 tag; /* WMI_BSSID_LIST_TAG */ 3000 __le32 num_bssid; 3001 struct wmi_mac_addr bssid_list[0]; 3002 } __packed; 3003 3004 struct wmi_ie_data { 3005 __le32 tag; /* WMI_IE_TAG */ 3006 __le32 ie_len; 3007 u8 ie_data[0]; 3008 } __packed; 3009 3010 struct wmi_ssid { 3011 __le32 ssid_len; 3012 u8 ssid[32]; 3013 } __packed; 3014 3015 struct wmi_ssid_list { 3016 __le32 tag; /* WMI_SSID_LIST_TAG */ 3017 __le32 num_ssids; 3018 struct wmi_ssid ssids[0]; 3019 } __packed; 3020 3021 /* prefix used by scan requestor ids on the host */ 3022 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000 3023 3024 /* prefix used by scan request ids generated on the host */ 3025 /* host cycles through the lower 12 bits to generate ids */ 3026 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000 3027 3028 #define WLAN_SCAN_PARAMS_MAX_SSID 16 3029 #define WLAN_SCAN_PARAMS_MAX_BSSID 4 3030 #define WLAN_SCAN_PARAMS_MAX_IE_LEN 256 3031 3032 /* Values lower than this may be refused by some firmware revisions with a scan 3033 * completion with a timedout reason. 3034 */ 3035 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40 3036 3037 /* Scan priority numbers must be sequential, starting with 0 */ 3038 enum wmi_scan_priority { 3039 WMI_SCAN_PRIORITY_VERY_LOW = 0, 3040 WMI_SCAN_PRIORITY_LOW, 3041 WMI_SCAN_PRIORITY_MEDIUM, 3042 WMI_SCAN_PRIORITY_HIGH, 3043 WMI_SCAN_PRIORITY_VERY_HIGH, 3044 WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */ 3045 }; 3046 3047 struct wmi_start_scan_common { 3048 /* Scan ID */ 3049 __le32 scan_id; 3050 /* Scan requestor ID */ 3051 __le32 scan_req_id; 3052 /* VDEV id(interface) that is requesting scan */ 3053 __le32 vdev_id; 3054 /* Scan Priority, input to scan scheduler */ 3055 __le32 scan_priority; 3056 /* Scan events subscription */ 3057 __le32 notify_scan_events; 3058 /* dwell time in msec on active channels */ 3059 __le32 dwell_time_active; 3060 /* dwell time in msec on passive channels */ 3061 __le32 dwell_time_passive; 3062 /* 3063 * min time in msec on the BSS channel,only valid if atleast one 3064 * VDEV is active 3065 */ 3066 __le32 min_rest_time; 3067 /* 3068 * max rest time in msec on the BSS channel,only valid if at least 3069 * one VDEV is active 3070 */ 3071 /* 3072 * the scanner will rest on the bss channel at least min_rest_time 3073 * after min_rest_time the scanner will start checking for tx/rx 3074 * activity on all VDEVs. if there is no activity the scanner will 3075 * switch to off channel. if there is activity the scanner will let 3076 * the radio on the bss channel until max_rest_time expires.at 3077 * max_rest_time scanner will switch to off channel irrespective of 3078 * activity. activity is determined by the idle_time parameter. 3079 */ 3080 __le32 max_rest_time; 3081 /* 3082 * time before sending next set of probe requests. 3083 * The scanner keeps repeating probe requests transmission with 3084 * period specified by repeat_probe_time. 3085 * The number of probe requests specified depends on the ssid_list 3086 * and bssid_list 3087 */ 3088 __le32 repeat_probe_time; 3089 /* time in msec between 2 consequetive probe requests with in a set. */ 3090 __le32 probe_spacing_time; 3091 /* 3092 * data inactivity time in msec on bss channel that will be used by 3093 * scanner for measuring the inactivity. 3094 */ 3095 __le32 idle_time; 3096 /* maximum time in msec allowed for scan */ 3097 __le32 max_scan_time; 3098 /* 3099 * delay in msec before sending first probe request after switching 3100 * to a channel 3101 */ 3102 __le32 probe_delay; 3103 /* Scan control flags */ 3104 __le32 scan_ctrl_flags; 3105 } __packed; 3106 3107 struct wmi_start_scan_tlvs { 3108 /* TLV parameters. These includes channel list, ssid list, bssid list, 3109 * extra ies. 3110 */ 3111 u8 tlvs[0]; 3112 } __packed; 3113 3114 struct wmi_start_scan_cmd { 3115 struct wmi_start_scan_common common; 3116 __le32 burst_duration_ms; 3117 struct wmi_start_scan_tlvs tlvs; 3118 } __packed; 3119 3120 /* This is the definition from 10.X firmware branch */ 3121 struct wmi_10x_start_scan_cmd { 3122 struct wmi_start_scan_common common; 3123 struct wmi_start_scan_tlvs tlvs; 3124 } __packed; 3125 3126 struct wmi_ssid_arg { 3127 int len; 3128 const u8 *ssid; 3129 }; 3130 3131 struct wmi_bssid_arg { 3132 const u8 *bssid; 3133 }; 3134 3135 struct wmi_start_scan_arg { 3136 u32 scan_id; 3137 u32 scan_req_id; 3138 u32 vdev_id; 3139 u32 scan_priority; 3140 u32 notify_scan_events; 3141 u32 dwell_time_active; 3142 u32 dwell_time_passive; 3143 u32 min_rest_time; 3144 u32 max_rest_time; 3145 u32 repeat_probe_time; 3146 u32 probe_spacing_time; 3147 u32 idle_time; 3148 u32 max_scan_time; 3149 u32 probe_delay; 3150 u32 scan_ctrl_flags; 3151 u32 burst_duration_ms; 3152 3153 u32 ie_len; 3154 u32 n_channels; 3155 u32 n_ssids; 3156 u32 n_bssids; 3157 3158 u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN]; 3159 u16 channels[64]; 3160 struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID]; 3161 struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID]; 3162 }; 3163 3164 /* scan control flags */ 3165 3166 /* passively scan all channels including active channels */ 3167 #define WMI_SCAN_FLAG_PASSIVE 0x1 3168 /* add wild card ssid probe request even though ssid_list is specified. */ 3169 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2 3170 /* add cck rates to rates/xrate ie for the generated probe request */ 3171 #define WMI_SCAN_ADD_CCK_RATES 0x4 3172 /* add ofdm rates to rates/xrate ie for the generated probe request */ 3173 #define WMI_SCAN_ADD_OFDM_RATES 0x8 3174 /* To enable indication of Chan load and Noise floor to host */ 3175 #define WMI_SCAN_CHAN_STAT_EVENT 0x10 3176 /* Filter Probe request frames */ 3177 #define WMI_SCAN_FILTER_PROBE_REQ 0x20 3178 /* When set, DFS channels will not be scanned */ 3179 #define WMI_SCAN_BYPASS_DFS_CHN 0x40 3180 /* Different FW scan engine may choose to bail out on errors. 3181 * Allow the driver to have influence over that. 3182 */ 3183 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80 3184 3185 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */ 3186 #define WMI_SCAN_CLASS_MASK 0xFF000000 3187 3188 enum wmi_stop_scan_type { 3189 WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */ 3190 WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */ 3191 WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */ 3192 }; 3193 3194 struct wmi_stop_scan_cmd { 3195 __le32 scan_req_id; 3196 __le32 scan_id; 3197 __le32 req_type; 3198 __le32 vdev_id; 3199 } __packed; 3200 3201 struct wmi_stop_scan_arg { 3202 u32 req_id; 3203 enum wmi_stop_scan_type req_type; 3204 union { 3205 u32 scan_id; 3206 u32 vdev_id; 3207 } u; 3208 }; 3209 3210 struct wmi_scan_chan_list_cmd { 3211 __le32 num_scan_chans; 3212 struct wmi_channel chan_info[0]; 3213 } __packed; 3214 3215 struct wmi_scan_chan_list_arg { 3216 u32 n_channels; 3217 struct wmi_channel_arg *channels; 3218 }; 3219 3220 enum wmi_bss_filter { 3221 WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */ 3222 WMI_BSS_FILTER_ALL, /* all beacons forwarded */ 3223 WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */ 3224 WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */ 3225 WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */ 3226 WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */ 3227 WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */ 3228 WMI_BSS_FILTER_LAST_BSS, /* marker only */ 3229 }; 3230 3231 enum wmi_scan_event_type { 3232 WMI_SCAN_EVENT_STARTED = BIT(0), 3233 WMI_SCAN_EVENT_COMPLETED = BIT(1), 3234 WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2), 3235 WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3), 3236 WMI_SCAN_EVENT_DEQUEUED = BIT(4), 3237 /* possibly by high-prio scan */ 3238 WMI_SCAN_EVENT_PREEMPTED = BIT(5), 3239 WMI_SCAN_EVENT_START_FAILED = BIT(6), 3240 WMI_SCAN_EVENT_RESTARTED = BIT(7), 3241 WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8), 3242 WMI_SCAN_EVENT_MAX = BIT(15), 3243 }; 3244 3245 enum wmi_scan_completion_reason { 3246 WMI_SCAN_REASON_COMPLETED, 3247 WMI_SCAN_REASON_CANCELLED, 3248 WMI_SCAN_REASON_PREEMPTED, 3249 WMI_SCAN_REASON_TIMEDOUT, 3250 WMI_SCAN_REASON_INTERNAL_FAILURE, 3251 WMI_SCAN_REASON_MAX, 3252 }; 3253 3254 struct wmi_scan_event { 3255 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 3256 __le32 reason; /* %WMI_SCAN_REASON_ */ 3257 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 3258 __le32 scan_req_id; 3259 __le32 scan_id; 3260 __le32 vdev_id; 3261 } __packed; 3262 3263 /* 3264 * This defines how much headroom is kept in the 3265 * receive frame between the descriptor and the 3266 * payload, in order for the WMI PHY error and 3267 * management handler to insert header contents. 3268 * 3269 * This is in bytes. 3270 */ 3271 #define WMI_MGMT_RX_HDR_HEADROOM 52 3272 3273 /* 3274 * This event will be used for sending scan results 3275 * as well as rx mgmt frames to the host. The rx buffer 3276 * will be sent as part of this WMI event. It would be a 3277 * good idea to pass all the fields in the RX status 3278 * descriptor up to the host. 3279 */ 3280 struct wmi_mgmt_rx_hdr_v1 { 3281 __le32 channel; 3282 __le32 snr; 3283 __le32 rate; 3284 __le32 phy_mode; 3285 __le32 buf_len; 3286 __le32 status; /* %WMI_RX_STATUS_ */ 3287 } __packed; 3288 3289 struct wmi_mgmt_rx_hdr_v2 { 3290 struct wmi_mgmt_rx_hdr_v1 v1; 3291 __le32 rssi_ctl[4]; 3292 } __packed; 3293 3294 struct wmi_mgmt_rx_event_v1 { 3295 struct wmi_mgmt_rx_hdr_v1 hdr; 3296 u8 buf[0]; 3297 } __packed; 3298 3299 struct wmi_mgmt_rx_event_v2 { 3300 struct wmi_mgmt_rx_hdr_v2 hdr; 3301 u8 buf[0]; 3302 } __packed; 3303 3304 struct wmi_10_4_mgmt_rx_hdr { 3305 __le32 channel; 3306 __le32 snr; 3307 u8 rssi_ctl[4]; 3308 __le32 rate; 3309 __le32 phy_mode; 3310 __le32 buf_len; 3311 __le32 status; 3312 } __packed; 3313 3314 struct wmi_10_4_mgmt_rx_event { 3315 struct wmi_10_4_mgmt_rx_hdr hdr; 3316 u8 buf[0]; 3317 } __packed; 3318 3319 struct wmi_mgmt_rx_ext_info { 3320 __le64 rx_mac_timestamp; 3321 } __packed __aligned(4); 3322 3323 #define WMI_RX_STATUS_OK 0x00 3324 #define WMI_RX_STATUS_ERR_CRC 0x01 3325 #define WMI_RX_STATUS_ERR_DECRYPT 0x08 3326 #define WMI_RX_STATUS_ERR_MIC 0x10 3327 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20 3328 /* Extension data at the end of mgmt frame */ 3329 #define WMI_RX_STATUS_EXT_INFO 0x40 3330 3331 #define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26 3332 #define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24 3333 #define PHY_ERROR_GEN_RADAR 0x05 3334 3335 #define PHY_ERROR_10_4_RADAR_MASK 0x4 3336 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000 3337 3338 enum phy_err_type { 3339 PHY_ERROR_UNKNOWN, 3340 PHY_ERROR_SPECTRAL_SCAN, 3341 PHY_ERROR_FALSE_RADAR_EXT, 3342 PHY_ERROR_RADAR 3343 }; 3344 3345 struct wmi_phyerr { 3346 __le32 tsf_timestamp; 3347 __le16 freq1; 3348 __le16 freq2; 3349 u8 rssi_combined; 3350 u8 chan_width_mhz; 3351 u8 phy_err_code; 3352 u8 rsvd0; 3353 __le32 rssi_chains[4]; 3354 __le16 nf_chains[4]; 3355 __le32 buf_len; 3356 u8 buf[0]; 3357 } __packed; 3358 3359 struct wmi_phyerr_event { 3360 __le32 num_phyerrs; 3361 __le32 tsf_l32; 3362 __le32 tsf_u32; 3363 struct wmi_phyerr phyerrs[0]; 3364 } __packed; 3365 3366 struct wmi_10_4_phyerr_event { 3367 __le32 tsf_l32; 3368 __le32 tsf_u32; 3369 __le16 freq1; 3370 __le16 freq2; 3371 u8 rssi_combined; 3372 u8 chan_width_mhz; 3373 u8 phy_err_code; 3374 u8 rsvd0; 3375 __le32 rssi_chains[4]; 3376 __le16 nf_chains[4]; 3377 __le32 phy_err_mask[2]; 3378 __le32 tsf_timestamp; 3379 __le32 buf_len; 3380 u8 buf[0]; 3381 } __packed; 3382 3383 #define PHYERR_TLV_SIG 0xBB 3384 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB 3385 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8 3386 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9 3387 3388 struct phyerr_radar_report { 3389 __le32 reg0; /* RADAR_REPORT_REG0_* */ 3390 __le32 reg1; /* RADAR_REPORT_REG1_* */ 3391 } __packed; 3392 3393 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000 3394 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31 3395 3396 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000 3397 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30 3398 3399 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000 3400 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20 3401 3402 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000 3403 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16 3404 3405 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00 3406 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10 3407 3408 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF 3409 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0 3410 3411 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000 3412 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31 3413 3414 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000 3415 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24 3416 3417 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000 3418 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16 3419 3420 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00 3421 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8 3422 3423 #define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF 3424 #define RADAR_REPORT_REG1_PULSE_DUR_LSB 0 3425 3426 struct phyerr_fft_report { 3427 __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */ 3428 __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */ 3429 } __packed; 3430 3431 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000 3432 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23 3433 3434 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000 3435 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14 3436 3437 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000 3438 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12 3439 3440 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF 3441 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0 3442 3443 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000 3444 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26 3445 3446 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000 3447 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18 3448 3449 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00 3450 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8 3451 3452 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF 3453 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0 3454 3455 struct phyerr_tlv { 3456 __le16 len; 3457 u8 tag; 3458 u8 sig; 3459 } __packed; 3460 3461 #define DFS_RSSI_POSSIBLY_FALSE 50 3462 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40 3463 3464 struct wmi_mgmt_tx_hdr { 3465 __le32 vdev_id; 3466 struct wmi_mac_addr peer_macaddr; 3467 __le32 tx_rate; 3468 __le32 tx_power; 3469 __le32 buf_len; 3470 } __packed; 3471 3472 struct wmi_mgmt_tx_cmd { 3473 struct wmi_mgmt_tx_hdr hdr; 3474 u8 buf[0]; 3475 } __packed; 3476 3477 struct wmi_echo_event { 3478 __le32 value; 3479 } __packed; 3480 3481 struct wmi_echo_cmd { 3482 __le32 value; 3483 } __packed; 3484 3485 struct wmi_pdev_set_regdomain_cmd { 3486 __le32 reg_domain; 3487 __le32 reg_domain_2G; 3488 __le32 reg_domain_5G; 3489 __le32 conformance_test_limit_2G; 3490 __le32 conformance_test_limit_5G; 3491 } __packed; 3492 3493 enum wmi_dfs_region { 3494 /* Uninitialized dfs domain */ 3495 WMI_UNINIT_DFS_DOMAIN = 0, 3496 3497 /* FCC3 dfs domain */ 3498 WMI_FCC_DFS_DOMAIN = 1, 3499 3500 /* ETSI dfs domain */ 3501 WMI_ETSI_DFS_DOMAIN = 2, 3502 3503 /*Japan dfs domain */ 3504 WMI_MKK4_DFS_DOMAIN = 3, 3505 }; 3506 3507 struct wmi_pdev_set_regdomain_cmd_10x { 3508 __le32 reg_domain; 3509 __le32 reg_domain_2G; 3510 __le32 reg_domain_5G; 3511 __le32 conformance_test_limit_2G; 3512 __le32 conformance_test_limit_5G; 3513 3514 /* dfs domain from wmi_dfs_region */ 3515 __le32 dfs_domain; 3516 } __packed; 3517 3518 /* Command to set/unset chip in quiet mode */ 3519 struct wmi_pdev_set_quiet_cmd { 3520 /* period in TUs */ 3521 __le32 period; 3522 3523 /* duration in TUs */ 3524 __le32 duration; 3525 3526 /* offset in TUs */ 3527 __le32 next_start; 3528 3529 /* enable/disable */ 3530 __le32 enabled; 3531 } __packed; 3532 3533 /* 3534 * 802.11g protection mode. 3535 */ 3536 enum ath10k_protmode { 3537 ATH10K_PROT_NONE = 0, /* no protection */ 3538 ATH10K_PROT_CTSONLY = 1, /* CTS to self */ 3539 ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */ 3540 }; 3541 3542 enum wmi_rtscts_profile { 3543 WMI_RTSCTS_FOR_NO_RATESERIES = 0, 3544 WMI_RTSCTS_FOR_SECOND_RATESERIES, 3545 WMI_RTSCTS_ACROSS_SW_RETRIES 3546 }; 3547 3548 #define WMI_RTSCTS_ENABLED 1 3549 #define WMI_RTSCTS_SET_MASK 0x0f 3550 #define WMI_RTSCTS_SET_LSB 0 3551 3552 #define WMI_RTSCTS_PROFILE_MASK 0xf0 3553 #define WMI_RTSCTS_PROFILE_LSB 4 3554 3555 enum wmi_beacon_gen_mode { 3556 WMI_BEACON_STAGGERED_MODE = 0, 3557 WMI_BEACON_BURST_MODE = 1 3558 }; 3559 3560 enum wmi_csa_event_ies_present_flag { 3561 WMI_CSA_IE_PRESENT = 0x00000001, 3562 WMI_XCSA_IE_PRESENT = 0x00000002, 3563 WMI_WBW_IE_PRESENT = 0x00000004, 3564 WMI_CSWARP_IE_PRESENT = 0x00000008, 3565 }; 3566 3567 /* wmi CSA receive event from beacon frame */ 3568 struct wmi_csa_event { 3569 __le32 i_fc_dur; 3570 /* Bit 0-15: FC */ 3571 /* Bit 16-31: DUR */ 3572 struct wmi_mac_addr i_addr1; 3573 struct wmi_mac_addr i_addr2; 3574 __le32 csa_ie[2]; 3575 __le32 xcsa_ie[2]; 3576 __le32 wb_ie[2]; 3577 __le32 cswarp_ie; 3578 __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */ 3579 } __packed; 3580 3581 /* the definition of different PDEV parameters */ 3582 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3583 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3584 #define PEER_DEFAULT_STATS_UPDATE_PERIOD 500 3585 3586 struct wmi_pdev_param_map { 3587 u32 tx_chain_mask; 3588 u32 rx_chain_mask; 3589 u32 txpower_limit2g; 3590 u32 txpower_limit5g; 3591 u32 txpower_scale; 3592 u32 beacon_gen_mode; 3593 u32 beacon_tx_mode; 3594 u32 resmgr_offchan_mode; 3595 u32 protection_mode; 3596 u32 dynamic_bw; 3597 u32 non_agg_sw_retry_th; 3598 u32 agg_sw_retry_th; 3599 u32 sta_kickout_th; 3600 u32 ac_aggrsize_scaling; 3601 u32 ltr_enable; 3602 u32 ltr_ac_latency_be; 3603 u32 ltr_ac_latency_bk; 3604 u32 ltr_ac_latency_vi; 3605 u32 ltr_ac_latency_vo; 3606 u32 ltr_ac_latency_timeout; 3607 u32 ltr_sleep_override; 3608 u32 ltr_rx_override; 3609 u32 ltr_tx_activity_timeout; 3610 u32 l1ss_enable; 3611 u32 dsleep_enable; 3612 u32 pcielp_txbuf_flush; 3613 u32 pcielp_txbuf_watermark; 3614 u32 pcielp_txbuf_tmo_en; 3615 u32 pcielp_txbuf_tmo_value; 3616 u32 pdev_stats_update_period; 3617 u32 vdev_stats_update_period; 3618 u32 peer_stats_update_period; 3619 u32 bcnflt_stats_update_period; 3620 u32 pmf_qos; 3621 u32 arp_ac_override; 3622 u32 dcs; 3623 u32 ani_enable; 3624 u32 ani_poll_period; 3625 u32 ani_listen_period; 3626 u32 ani_ofdm_level; 3627 u32 ani_cck_level; 3628 u32 dyntxchain; 3629 u32 proxy_sta; 3630 u32 idle_ps_config; 3631 u32 power_gating_sleep; 3632 u32 fast_channel_reset; 3633 u32 burst_dur; 3634 u32 burst_enable; 3635 u32 cal_period; 3636 u32 aggr_burst; 3637 u32 rx_decap_mode; 3638 u32 smart_antenna_default_antenna; 3639 u32 igmpmld_override; 3640 u32 igmpmld_tid; 3641 u32 antenna_gain; 3642 u32 rx_filter; 3643 u32 set_mcast_to_ucast_tid; 3644 u32 proxy_sta_mode; 3645 u32 set_mcast2ucast_mode; 3646 u32 set_mcast2ucast_buffer; 3647 u32 remove_mcast2ucast_buffer; 3648 u32 peer_sta_ps_statechg_enable; 3649 u32 igmpmld_ac_override; 3650 u32 block_interbss; 3651 u32 set_disable_reset_cmdid; 3652 u32 set_msdu_ttl_cmdid; 3653 u32 set_ppdu_duration_cmdid; 3654 u32 txbf_sound_period_cmdid; 3655 u32 set_promisc_mode_cmdid; 3656 u32 set_burst_mode_cmdid; 3657 u32 en_stats; 3658 u32 mu_group_policy; 3659 u32 noise_detection; 3660 u32 noise_threshold; 3661 u32 dpd_enable; 3662 u32 set_mcast_bcast_echo; 3663 u32 atf_strict_sch; 3664 u32 atf_sched_duration; 3665 u32 ant_plzn; 3666 u32 mgmt_retry_limit; 3667 u32 sensitivity_level; 3668 u32 signed_txpower_2g; 3669 u32 signed_txpower_5g; 3670 u32 enable_per_tid_amsdu; 3671 u32 enable_per_tid_ampdu; 3672 u32 cca_threshold; 3673 u32 rts_fixed_rate; 3674 u32 pdev_reset; 3675 u32 wapi_mbssid_offset; 3676 u32 arp_srcaddr; 3677 u32 arp_dstaddr; 3678 u32 enable_btcoex; 3679 }; 3680 3681 #define WMI_PDEV_PARAM_UNSUPPORTED 0 3682 3683 enum wmi_pdev_param { 3684 /* TX chain mask */ 3685 WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3686 /* RX chain mask */ 3687 WMI_PDEV_PARAM_RX_CHAIN_MASK, 3688 /* TX power limit for 2G Radio */ 3689 WMI_PDEV_PARAM_TXPOWER_LIMIT2G, 3690 /* TX power limit for 5G Radio */ 3691 WMI_PDEV_PARAM_TXPOWER_LIMIT5G, 3692 /* TX power scale */ 3693 WMI_PDEV_PARAM_TXPOWER_SCALE, 3694 /* Beacon generation mode . 0: host, 1: target */ 3695 WMI_PDEV_PARAM_BEACON_GEN_MODE, 3696 /* Beacon generation mode . 0: staggered 1: bursted */ 3697 WMI_PDEV_PARAM_BEACON_TX_MODE, 3698 /* 3699 * Resource manager off chan mode . 3700 * 0: turn off off chan mode. 1: turn on offchan mode 3701 */ 3702 WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3703 /* 3704 * Protection mode: 3705 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3706 */ 3707 WMI_PDEV_PARAM_PROTECTION_MODE, 3708 /* 3709 * Dynamic bandwidth - 0: disable, 1: enable 3710 * 3711 * When enabled HW rate control tries different bandwidths when 3712 * retransmitting frames. 3713 */ 3714 WMI_PDEV_PARAM_DYNAMIC_BW, 3715 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3716 WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3717 /* aggregrate sw retry threshold. 0-disable*/ 3718 WMI_PDEV_PARAM_AGG_SW_RETRY_TH, 3719 /* Station kickout threshold (non of consecutive failures).0-disable */ 3720 WMI_PDEV_PARAM_STA_KICKOUT_TH, 3721 /* Aggerate size scaling configuration per AC */ 3722 WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3723 /* LTR enable */ 3724 WMI_PDEV_PARAM_LTR_ENABLE, 3725 /* LTR latency for BE, in us */ 3726 WMI_PDEV_PARAM_LTR_AC_LATENCY_BE, 3727 /* LTR latency for BK, in us */ 3728 WMI_PDEV_PARAM_LTR_AC_LATENCY_BK, 3729 /* LTR latency for VI, in us */ 3730 WMI_PDEV_PARAM_LTR_AC_LATENCY_VI, 3731 /* LTR latency for VO, in us */ 3732 WMI_PDEV_PARAM_LTR_AC_LATENCY_VO, 3733 /* LTR AC latency timeout, in ms */ 3734 WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3735 /* LTR platform latency override, in us */ 3736 WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3737 /* LTR-RX override, in us */ 3738 WMI_PDEV_PARAM_LTR_RX_OVERRIDE, 3739 /* Tx activity timeout for LTR, in us */ 3740 WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3741 /* L1SS state machine enable */ 3742 WMI_PDEV_PARAM_L1SS_ENABLE, 3743 /* Deep sleep state machine enable */ 3744 WMI_PDEV_PARAM_DSLEEP_ENABLE, 3745 /* RX buffering flush enable */ 3746 WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3747 /* RX buffering matermark */ 3748 WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3749 /* RX buffering timeout enable */ 3750 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3751 /* RX buffering timeout value */ 3752 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3753 /* pdev level stats update period in ms */ 3754 WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3755 /* vdev level stats update period in ms */ 3756 WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3757 /* peer level stats update period in ms */ 3758 WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3759 /* beacon filter status update period */ 3760 WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3761 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3762 WMI_PDEV_PARAM_PMF_QOS, 3763 /* Access category on which ARP frames are sent */ 3764 WMI_PDEV_PARAM_ARP_AC_OVERRIDE, 3765 /* DCS configuration */ 3766 WMI_PDEV_PARAM_DCS, 3767 /* Enable/Disable ANI on target */ 3768 WMI_PDEV_PARAM_ANI_ENABLE, 3769 /* configure the ANI polling period */ 3770 WMI_PDEV_PARAM_ANI_POLL_PERIOD, 3771 /* configure the ANI listening period */ 3772 WMI_PDEV_PARAM_ANI_LISTEN_PERIOD, 3773 /* configure OFDM immunity level */ 3774 WMI_PDEV_PARAM_ANI_OFDM_LEVEL, 3775 /* configure CCK immunity level */ 3776 WMI_PDEV_PARAM_ANI_CCK_LEVEL, 3777 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3778 WMI_PDEV_PARAM_DYNTXCHAIN, 3779 /* Enable/Disable proxy STA */ 3780 WMI_PDEV_PARAM_PROXY_STA, 3781 /* Enable/Disable low power state when all VDEVs are inactive/idle. */ 3782 WMI_PDEV_PARAM_IDLE_PS_CONFIG, 3783 /* Enable/Disable power gating sleep */ 3784 WMI_PDEV_PARAM_POWER_GATING_SLEEP, 3785 }; 3786 3787 enum wmi_10x_pdev_param { 3788 /* TX chian mask */ 3789 WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3790 /* RX chian mask */ 3791 WMI_10X_PDEV_PARAM_RX_CHAIN_MASK, 3792 /* TX power limit for 2G Radio */ 3793 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G, 3794 /* TX power limit for 5G Radio */ 3795 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G, 3796 /* TX power scale */ 3797 WMI_10X_PDEV_PARAM_TXPOWER_SCALE, 3798 /* Beacon generation mode . 0: host, 1: target */ 3799 WMI_10X_PDEV_PARAM_BEACON_GEN_MODE, 3800 /* Beacon generation mode . 0: staggered 1: bursted */ 3801 WMI_10X_PDEV_PARAM_BEACON_TX_MODE, 3802 /* 3803 * Resource manager off chan mode . 3804 * 0: turn off off chan mode. 1: turn on offchan mode 3805 */ 3806 WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3807 /* 3808 * Protection mode: 3809 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3810 */ 3811 WMI_10X_PDEV_PARAM_PROTECTION_MODE, 3812 /* Dynamic bandwidth 0: disable 1: enable */ 3813 WMI_10X_PDEV_PARAM_DYNAMIC_BW, 3814 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3815 WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3816 /* aggregrate sw retry threshold. 0-disable*/ 3817 WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH, 3818 /* Station kickout threshold (non of consecutive failures).0-disable */ 3819 WMI_10X_PDEV_PARAM_STA_KICKOUT_TH, 3820 /* Aggerate size scaling configuration per AC */ 3821 WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3822 /* LTR enable */ 3823 WMI_10X_PDEV_PARAM_LTR_ENABLE, 3824 /* LTR latency for BE, in us */ 3825 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE, 3826 /* LTR latency for BK, in us */ 3827 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK, 3828 /* LTR latency for VI, in us */ 3829 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI, 3830 /* LTR latency for VO, in us */ 3831 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO, 3832 /* LTR AC latency timeout, in ms */ 3833 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3834 /* LTR platform latency override, in us */ 3835 WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3836 /* LTR-RX override, in us */ 3837 WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE, 3838 /* Tx activity timeout for LTR, in us */ 3839 WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3840 /* L1SS state machine enable */ 3841 WMI_10X_PDEV_PARAM_L1SS_ENABLE, 3842 /* Deep sleep state machine enable */ 3843 WMI_10X_PDEV_PARAM_DSLEEP_ENABLE, 3844 /* pdev level stats update period in ms */ 3845 WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3846 /* vdev level stats update period in ms */ 3847 WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3848 /* peer level stats update period in ms */ 3849 WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3850 /* beacon filter status update period */ 3851 WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3852 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3853 WMI_10X_PDEV_PARAM_PMF_QOS, 3854 /* Access category on which ARP and DHCP frames are sent */ 3855 WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE, 3856 /* DCS configuration */ 3857 WMI_10X_PDEV_PARAM_DCS, 3858 /* Enable/Disable ANI on target */ 3859 WMI_10X_PDEV_PARAM_ANI_ENABLE, 3860 /* configure the ANI polling period */ 3861 WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD, 3862 /* configure the ANI listening period */ 3863 WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD, 3864 /* configure OFDM immunity level */ 3865 WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL, 3866 /* configure CCK immunity level */ 3867 WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL, 3868 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3869 WMI_10X_PDEV_PARAM_DYNTXCHAIN, 3870 /* Enable/Disable Fast channel reset*/ 3871 WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET, 3872 /* Set Bursting DUR */ 3873 WMI_10X_PDEV_PARAM_BURST_DUR, 3874 /* Set Bursting Enable*/ 3875 WMI_10X_PDEV_PARAM_BURST_ENABLE, 3876 3877 /* following are available as of firmware 10.2 */ 3878 WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 3879 WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE, 3880 WMI_10X_PDEV_PARAM_IGMPMLD_TID, 3881 WMI_10X_PDEV_PARAM_ANTENNA_GAIN, 3882 WMI_10X_PDEV_PARAM_RX_DECAP_MODE, 3883 WMI_10X_PDEV_PARAM_RX_FILTER, 3884 WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID, 3885 WMI_10X_PDEV_PARAM_PROXY_STA_MODE, 3886 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE, 3887 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 3888 WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 3889 WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE, 3890 WMI_10X_PDEV_PARAM_RTS_FIXED_RATE, 3891 WMI_10X_PDEV_PARAM_CAL_PERIOD 3892 }; 3893 3894 enum wmi_10_4_pdev_param { 3895 WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3896 WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK, 3897 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G, 3898 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G, 3899 WMI_10_4_PDEV_PARAM_TXPOWER_SCALE, 3900 WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE, 3901 WMI_10_4_PDEV_PARAM_BEACON_TX_MODE, 3902 WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3903 WMI_10_4_PDEV_PARAM_PROTECTION_MODE, 3904 WMI_10_4_PDEV_PARAM_DYNAMIC_BW, 3905 WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3906 WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH, 3907 WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH, 3908 WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3909 WMI_10_4_PDEV_PARAM_LTR_ENABLE, 3910 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE, 3911 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK, 3912 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI, 3913 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO, 3914 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3915 WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3916 WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE, 3917 WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3918 WMI_10_4_PDEV_PARAM_L1SS_ENABLE, 3919 WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE, 3920 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3921 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3922 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3923 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3924 WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3925 WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3926 WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3927 WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3928 WMI_10_4_PDEV_PARAM_PMF_QOS, 3929 WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE, 3930 WMI_10_4_PDEV_PARAM_DCS, 3931 WMI_10_4_PDEV_PARAM_ANI_ENABLE, 3932 WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD, 3933 WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD, 3934 WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL, 3935 WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL, 3936 WMI_10_4_PDEV_PARAM_DYNTXCHAIN, 3937 WMI_10_4_PDEV_PARAM_PROXY_STA, 3938 WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG, 3939 WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP, 3940 WMI_10_4_PDEV_PARAM_AGGR_BURST, 3941 WMI_10_4_PDEV_PARAM_RX_DECAP_MODE, 3942 WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET, 3943 WMI_10_4_PDEV_PARAM_BURST_DUR, 3944 WMI_10_4_PDEV_PARAM_BURST_ENABLE, 3945 WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 3946 WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE, 3947 WMI_10_4_PDEV_PARAM_IGMPMLD_TID, 3948 WMI_10_4_PDEV_PARAM_ANTENNA_GAIN, 3949 WMI_10_4_PDEV_PARAM_RX_FILTER, 3950 WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID, 3951 WMI_10_4_PDEV_PARAM_PROXY_STA_MODE, 3952 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE, 3953 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 3954 WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 3955 WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE, 3956 WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE, 3957 WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS, 3958 WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID, 3959 WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID, 3960 WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID, 3961 WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID, 3962 WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID, 3963 WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID, 3964 WMI_10_4_PDEV_PARAM_EN_STATS, 3965 WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY, 3966 WMI_10_4_PDEV_PARAM_NOISE_DETECTION, 3967 WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD, 3968 WMI_10_4_PDEV_PARAM_DPD_ENABLE, 3969 WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO, 3970 WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH, 3971 WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION, 3972 WMI_10_4_PDEV_PARAM_ANT_PLZN, 3973 WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT, 3974 WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL, 3975 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G, 3976 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G, 3977 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU, 3978 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU, 3979 WMI_10_4_PDEV_PARAM_CCA_THRESHOLD, 3980 WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE, 3981 WMI_10_4_PDEV_PARAM_CAL_PERIOD, 3982 WMI_10_4_PDEV_PARAM_PDEV_RESET, 3983 WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET, 3984 WMI_10_4_PDEV_PARAM_ARP_SRCADDR, 3985 WMI_10_4_PDEV_PARAM_ARP_DSTADDR, 3986 WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB, 3987 WMI_10_4_PDEV_PARAM_RX_BATCHMODE, 3988 WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY, 3989 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH, 3990 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR, 3991 WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE, 3992 WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE, 3993 WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY, 3994 WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, 3995 }; 3996 3997 struct wmi_pdev_set_param_cmd { 3998 __le32 param_id; 3999 __le32 param_value; 4000 } __packed; 4001 4002 /* valid period is 1 ~ 60000ms, unit in millisecond */ 4003 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000 4004 4005 struct wmi_pdev_get_tpc_config_cmd { 4006 /* parameter */ 4007 __le32 param; 4008 } __packed; 4009 4010 #define WMI_TPC_CONFIG_PARAM 1 4011 #define WMI_TPC_RATE_MAX 160 4012 #define WMI_TPC_FINAL_RATE_MAX 240 4013 #define WMI_TPC_TX_N_CHAIN 4 4014 #define WMI_TPC_PREAM_TABLE_MAX 10 4015 #define WMI_TPC_FLAG 3 4016 #define WMI_TPC_BUF_SIZE 10 4017 #define WMI_TPC_BEAMFORMING 2 4018 4019 enum wmi_tpc_table_type { 4020 WMI_TPC_TABLE_TYPE_CDD = 0, 4021 WMI_TPC_TABLE_TYPE_STBC = 1, 4022 WMI_TPC_TABLE_TYPE_TXBF = 2, 4023 }; 4024 4025 enum wmi_tpc_config_event_flag { 4026 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, 4027 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, 4028 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, 4029 }; 4030 4031 struct wmi_pdev_tpc_config_event { 4032 __le32 reg_domain; 4033 __le32 chan_freq; 4034 __le32 phy_mode; 4035 __le32 twice_antenna_reduction; 4036 __le32 twice_max_rd_power; 4037 a_sle32 twice_antenna_gain; 4038 __le32 power_limit; 4039 __le32 rate_max; 4040 __le32 num_tx_chain; 4041 __le32 ctl; 4042 __le32 flags; 4043 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 4044 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4045 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4046 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4047 u8 rates_array[WMI_TPC_RATE_MAX]; 4048 } __packed; 4049 4050 /* Transmit power scale factor. */ 4051 enum wmi_tp_scale { 4052 WMI_TP_SCALE_MAX = 0, /* no scaling (default) */ 4053 WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ 4054 WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ 4055 WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ 4056 WMI_TP_SCALE_MIN = 4, /* min, but still on */ 4057 WMI_TP_SCALE_SIZE = 5, /* max num of enum */ 4058 }; 4059 4060 struct wmi_pdev_tpc_final_table_event { 4061 __le32 reg_domain; 4062 __le32 chan_freq; 4063 __le32 phy_mode; 4064 __le32 twice_antenna_reduction; 4065 __le32 twice_max_rd_power; 4066 a_sle32 twice_antenna_gain; 4067 __le32 power_limit; 4068 __le32 rate_max; 4069 __le32 num_tx_chain; 4070 __le32 ctl; 4071 __le32 flags; 4072 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 4073 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4074 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4075 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4076 u8 rates_array[WMI_TPC_FINAL_RATE_MAX]; 4077 u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN] 4078 [WMI_TPC_TX_N_CHAIN]; 4079 } __packed; 4080 4081 struct wmi_pdev_get_tpc_table_cmd { 4082 __le32 param; 4083 } __packed; 4084 4085 enum wmi_tpc_pream_2ghz { 4086 WMI_TPC_PREAM_2GHZ_CCK = 0, 4087 WMI_TPC_PREAM_2GHZ_OFDM, 4088 WMI_TPC_PREAM_2GHZ_HT20, 4089 WMI_TPC_PREAM_2GHZ_HT40, 4090 WMI_TPC_PREAM_2GHZ_VHT20, 4091 WMI_TPC_PREAM_2GHZ_VHT40, 4092 WMI_TPC_PREAM_2GHZ_VHT80, 4093 }; 4094 4095 enum wmi_tpc_pream_5ghz { 4096 WMI_TPC_PREAM_5GHZ_OFDM = 1, 4097 WMI_TPC_PREAM_5GHZ_HT20, 4098 WMI_TPC_PREAM_5GHZ_HT40, 4099 WMI_TPC_PREAM_5GHZ_VHT20, 4100 WMI_TPC_PREAM_5GHZ_VHT40, 4101 WMI_TPC_PREAM_5GHZ_VHT80, 4102 WMI_TPC_PREAM_5GHZ_HTCUP, 4103 }; 4104 4105 struct wmi_pdev_chanlist_update_event { 4106 /* number of channels */ 4107 __le32 num_chan; 4108 /* array of channels */ 4109 struct wmi_channel channel_list[1]; 4110 } __packed; 4111 4112 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32) 4113 4114 struct wmi_debug_mesg_event { 4115 /* message buffer, NULL terminated */ 4116 char bufp[WMI_MAX_DEBUG_MESG]; 4117 } __packed; 4118 4119 enum { 4120 /* P2P device */ 4121 VDEV_SUBTYPE_P2PDEV = 0, 4122 /* P2P client */ 4123 VDEV_SUBTYPE_P2PCLI, 4124 /* P2P GO */ 4125 VDEV_SUBTYPE_P2PGO, 4126 /* BT3.0 HS */ 4127 VDEV_SUBTYPE_BT, 4128 }; 4129 4130 struct wmi_pdev_set_channel_cmd { 4131 /* idnore power , only use flags , mode and freq */ 4132 struct wmi_channel chan; 4133 } __packed; 4134 4135 struct wmi_pdev_pktlog_enable_cmd { 4136 __le32 ev_bitmap; 4137 } __packed; 4138 4139 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */ 4140 #define WMI_DSCP_MAP_MAX (64) 4141 struct wmi_pdev_set_dscp_tid_map_cmd { 4142 /* map indicating DSCP to TID conversion */ 4143 __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX]; 4144 } __packed; 4145 4146 enum mcast_bcast_rate_id { 4147 WMI_SET_MCAST_RATE, 4148 WMI_SET_BCAST_RATE 4149 }; 4150 4151 struct mcast_bcast_rate { 4152 enum mcast_bcast_rate_id rate_id; 4153 __le32 rate; 4154 } __packed; 4155 4156 struct wmi_wmm_params { 4157 __le32 cwmin; 4158 __le32 cwmax; 4159 __le32 aifs; 4160 __le32 txop; 4161 __le32 acm; 4162 __le32 no_ack; 4163 } __packed; 4164 4165 struct wmi_pdev_set_wmm_params { 4166 struct wmi_wmm_params ac_be; 4167 struct wmi_wmm_params ac_bk; 4168 struct wmi_wmm_params ac_vi; 4169 struct wmi_wmm_params ac_vo; 4170 } __packed; 4171 4172 struct wmi_wmm_params_arg { 4173 u32 cwmin; 4174 u32 cwmax; 4175 u32 aifs; 4176 u32 txop; 4177 u32 acm; 4178 u32 no_ack; 4179 }; 4180 4181 struct wmi_wmm_params_all_arg { 4182 struct wmi_wmm_params_arg ac_be; 4183 struct wmi_wmm_params_arg ac_bk; 4184 struct wmi_wmm_params_arg ac_vi; 4185 struct wmi_wmm_params_arg ac_vo; 4186 }; 4187 4188 struct wmi_pdev_stats_tx { 4189 /* Num HTT cookies queued to dispatch list */ 4190 __le32 comp_queued; 4191 4192 /* Num HTT cookies dispatched */ 4193 __le32 comp_delivered; 4194 4195 /* Num MSDU queued to WAL */ 4196 __le32 msdu_enqued; 4197 4198 /* Num MPDU queue to WAL */ 4199 __le32 mpdu_enqued; 4200 4201 /* Num MSDUs dropped by WMM limit */ 4202 __le32 wmm_drop; 4203 4204 /* Num Local frames queued */ 4205 __le32 local_enqued; 4206 4207 /* Num Local frames done */ 4208 __le32 local_freed; 4209 4210 /* Num queued to HW */ 4211 __le32 hw_queued; 4212 4213 /* Num PPDU reaped from HW */ 4214 __le32 hw_reaped; 4215 4216 /* Num underruns */ 4217 __le32 underrun; 4218 4219 /* Num PPDUs cleaned up in TX abort */ 4220 __le32 tx_abort; 4221 4222 /* Num MPDUs requed by SW */ 4223 __le32 mpdus_requed; 4224 4225 /* excessive retries */ 4226 __le32 tx_ko; 4227 4228 /* data hw rate code */ 4229 __le32 data_rc; 4230 4231 /* Scheduler self triggers */ 4232 __le32 self_triggers; 4233 4234 /* frames dropped due to excessive sw retries */ 4235 __le32 sw_retry_failure; 4236 4237 /* illegal rate phy errors */ 4238 __le32 illgl_rate_phy_err; 4239 4240 /* wal pdev continuous xretry */ 4241 __le32 pdev_cont_xretry; 4242 4243 /* wal pdev continous xretry */ 4244 __le32 pdev_tx_timeout; 4245 4246 /* wal pdev resets */ 4247 __le32 pdev_resets; 4248 4249 /* frames dropped due to non-availability of stateless TIDs */ 4250 __le32 stateless_tid_alloc_failure; 4251 4252 __le32 phy_underrun; 4253 4254 /* MPDU is more than txop limit */ 4255 __le32 txop_ovf; 4256 } __packed; 4257 4258 struct wmi_10_4_pdev_stats_tx { 4259 /* Num HTT cookies queued to dispatch list */ 4260 __le32 comp_queued; 4261 4262 /* Num HTT cookies dispatched */ 4263 __le32 comp_delivered; 4264 4265 /* Num MSDU queued to WAL */ 4266 __le32 msdu_enqued; 4267 4268 /* Num MPDU queue to WAL */ 4269 __le32 mpdu_enqued; 4270 4271 /* Num MSDUs dropped by WMM limit */ 4272 __le32 wmm_drop; 4273 4274 /* Num Local frames queued */ 4275 __le32 local_enqued; 4276 4277 /* Num Local frames done */ 4278 __le32 local_freed; 4279 4280 /* Num queued to HW */ 4281 __le32 hw_queued; 4282 4283 /* Num PPDU reaped from HW */ 4284 __le32 hw_reaped; 4285 4286 /* Num underruns */ 4287 __le32 underrun; 4288 4289 /* HW Paused. */ 4290 __le32 hw_paused; 4291 4292 /* Num PPDUs cleaned up in TX abort */ 4293 __le32 tx_abort; 4294 4295 /* Num MPDUs requed by SW */ 4296 __le32 mpdus_requed; 4297 4298 /* excessive retries */ 4299 __le32 tx_ko; 4300 4301 /* data hw rate code */ 4302 __le32 data_rc; 4303 4304 /* Scheduler self triggers */ 4305 __le32 self_triggers; 4306 4307 /* frames dropped due to excessive sw retries */ 4308 __le32 sw_retry_failure; 4309 4310 /* illegal rate phy errors */ 4311 __le32 illgl_rate_phy_err; 4312 4313 /* wal pdev continuous xretry */ 4314 __le32 pdev_cont_xretry; 4315 4316 /* wal pdev tx timeouts */ 4317 __le32 pdev_tx_timeout; 4318 4319 /* wal pdev resets */ 4320 __le32 pdev_resets; 4321 4322 /* frames dropped due to non-availability of stateless TIDs */ 4323 __le32 stateless_tid_alloc_failure; 4324 4325 __le32 phy_underrun; 4326 4327 /* MPDU is more than txop limit */ 4328 __le32 txop_ovf; 4329 4330 /* Number of Sequences posted */ 4331 __le32 seq_posted; 4332 4333 /* Number of Sequences failed queueing */ 4334 __le32 seq_failed_queueing; 4335 4336 /* Number of Sequences completed */ 4337 __le32 seq_completed; 4338 4339 /* Number of Sequences restarted */ 4340 __le32 seq_restarted; 4341 4342 /* Number of MU Sequences posted */ 4343 __le32 mu_seq_posted; 4344 4345 /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */ 4346 __le32 mpdus_sw_flush; 4347 4348 /* Num MPDUs filtered by HW, all filter condition (TTL expired) */ 4349 __le32 mpdus_hw_filter; 4350 4351 /* Num MPDUs truncated by PDG 4352 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw) 4353 */ 4354 __le32 mpdus_truncated; 4355 4356 /* Num MPDUs that was tried but didn't receive ACK or BA */ 4357 __le32 mpdus_ack_failed; 4358 4359 /* Num MPDUs that was dropped due to expiry. */ 4360 __le32 mpdus_expired; 4361 } __packed; 4362 4363 struct wmi_pdev_stats_rx { 4364 /* Cnts any change in ring routing mid-ppdu */ 4365 __le32 mid_ppdu_route_change; 4366 4367 /* Total number of statuses processed */ 4368 __le32 status_rcvd; 4369 4370 /* Extra frags on rings 0-3 */ 4371 __le32 r0_frags; 4372 __le32 r1_frags; 4373 __le32 r2_frags; 4374 __le32 r3_frags; 4375 4376 /* MSDUs / MPDUs delivered to HTT */ 4377 __le32 htt_msdus; 4378 __le32 htt_mpdus; 4379 4380 /* MSDUs / MPDUs delivered to local stack */ 4381 __le32 loc_msdus; 4382 __le32 loc_mpdus; 4383 4384 /* AMSDUs that have more MSDUs than the status ring size */ 4385 __le32 oversize_amsdu; 4386 4387 /* Number of PHY errors */ 4388 __le32 phy_errs; 4389 4390 /* Number of PHY errors drops */ 4391 __le32 phy_err_drop; 4392 4393 /* Number of mpdu errors - FCS, MIC, ENC etc. */ 4394 __le32 mpdu_errs; 4395 } __packed; 4396 4397 struct wmi_pdev_stats_peer { 4398 /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ 4399 __le32 dummy; 4400 } __packed; 4401 4402 enum wmi_stats_id { 4403 WMI_STAT_PEER = BIT(0), 4404 WMI_STAT_AP = BIT(1), 4405 WMI_STAT_PDEV = BIT(2), 4406 WMI_STAT_VDEV = BIT(3), 4407 WMI_STAT_BCNFLT = BIT(4), 4408 WMI_STAT_VDEV_RATE = BIT(5), 4409 }; 4410 4411 enum wmi_10_4_stats_id { 4412 WMI_10_4_STAT_PEER = BIT(0), 4413 WMI_10_4_STAT_AP = BIT(1), 4414 WMI_10_4_STAT_INST = BIT(2), 4415 WMI_10_4_STAT_PEER_EXTD = BIT(3), 4416 WMI_10_4_STAT_VDEV_EXTD = BIT(4), 4417 }; 4418 4419 struct wlan_inst_rssi_args { 4420 __le16 cfg_retry_count; 4421 __le16 retry_count; 4422 }; 4423 4424 struct wmi_request_stats_cmd { 4425 __le32 stats_id; 4426 4427 __le32 vdev_id; 4428 4429 /* peer MAC address */ 4430 struct wmi_mac_addr peer_macaddr; 4431 4432 /* Instantaneous RSSI arguments */ 4433 struct wlan_inst_rssi_args inst_rssi_args; 4434 } __packed; 4435 4436 /* Suspend option */ 4437 enum { 4438 /* suspend */ 4439 WMI_PDEV_SUSPEND, 4440 4441 /* suspend and disable all interrupts */ 4442 WMI_PDEV_SUSPEND_AND_DISABLE_INTR, 4443 }; 4444 4445 struct wmi_pdev_suspend_cmd { 4446 /* suspend option sent to target */ 4447 __le32 suspend_opt; 4448 } __packed; 4449 4450 struct wmi_stats_event { 4451 __le32 stats_id; /* WMI_STAT_ */ 4452 /* 4453 * number of pdev stats event structures 4454 * (wmi_pdev_stats) 0 or 1 4455 */ 4456 __le32 num_pdev_stats; 4457 /* 4458 * number of vdev stats event structures 4459 * (wmi_vdev_stats) 0 or max vdevs 4460 */ 4461 __le32 num_vdev_stats; 4462 /* 4463 * number of peer stats event structures 4464 * (wmi_peer_stats) 0 or max peers 4465 */ 4466 __le32 num_peer_stats; 4467 __le32 num_bcnflt_stats; 4468 /* 4469 * followed by 4470 * num_pdev_stats * size of(struct wmi_pdev_stats) 4471 * num_vdev_stats * size of(struct wmi_vdev_stats) 4472 * num_peer_stats * size of(struct wmi_peer_stats) 4473 * 4474 * By having a zero sized array, the pointer to data area 4475 * becomes available without increasing the struct size 4476 */ 4477 u8 data[0]; 4478 } __packed; 4479 4480 struct wmi_10_2_stats_event { 4481 __le32 stats_id; /* %WMI_REQUEST_ */ 4482 __le32 num_pdev_stats; 4483 __le32 num_pdev_ext_stats; 4484 __le32 num_vdev_stats; 4485 __le32 num_peer_stats; 4486 __le32 num_bcnflt_stats; 4487 u8 data[0]; 4488 } __packed; 4489 4490 /* 4491 * PDEV statistics 4492 * TODO: add all PDEV stats here 4493 */ 4494 struct wmi_pdev_stats_base { 4495 __le32 chan_nf; 4496 __le32 tx_frame_count; /* Cycles spent transmitting frames */ 4497 __le32 rx_frame_count; /* Cycles spent receiving frames */ 4498 __le32 rx_clear_count; /* Total channel busy time, evidently */ 4499 __le32 cycle_count; /* Total on-channel time */ 4500 __le32 phy_err_count; 4501 __le32 chan_tx_pwr; 4502 } __packed; 4503 4504 struct wmi_pdev_stats { 4505 struct wmi_pdev_stats_base base; 4506 struct wmi_pdev_stats_tx tx; 4507 struct wmi_pdev_stats_rx rx; 4508 struct wmi_pdev_stats_peer peer; 4509 } __packed; 4510 4511 struct wmi_pdev_stats_extra { 4512 __le32 ack_rx_bad; 4513 __le32 rts_bad; 4514 __le32 rts_good; 4515 __le32 fcs_bad; 4516 __le32 no_beacons; 4517 __le32 mib_int_count; 4518 } __packed; 4519 4520 struct wmi_10x_pdev_stats { 4521 struct wmi_pdev_stats_base base; 4522 struct wmi_pdev_stats_tx tx; 4523 struct wmi_pdev_stats_rx rx; 4524 struct wmi_pdev_stats_peer peer; 4525 struct wmi_pdev_stats_extra extra; 4526 } __packed; 4527 4528 struct wmi_pdev_stats_mem { 4529 __le32 dram_free; 4530 __le32 iram_free; 4531 } __packed; 4532 4533 struct wmi_10_2_pdev_stats { 4534 struct wmi_pdev_stats_base base; 4535 struct wmi_pdev_stats_tx tx; 4536 __le32 mc_drop; 4537 struct wmi_pdev_stats_rx rx; 4538 __le32 pdev_rx_timeout; 4539 struct wmi_pdev_stats_mem mem; 4540 struct wmi_pdev_stats_peer peer; 4541 struct wmi_pdev_stats_extra extra; 4542 } __packed; 4543 4544 struct wmi_10_4_pdev_stats { 4545 struct wmi_pdev_stats_base base; 4546 struct wmi_10_4_pdev_stats_tx tx; 4547 struct wmi_pdev_stats_rx rx; 4548 __le32 rx_ovfl_errs; 4549 struct wmi_pdev_stats_mem mem; 4550 __le32 sram_free_size; 4551 struct wmi_pdev_stats_extra extra; 4552 } __packed; 4553 4554 /* 4555 * VDEV statistics 4556 */ 4557 4558 #define WMI_VDEV_STATS_FTM_COUNT_VALID BIT(31) 4559 #define WMI_VDEV_STATS_FTM_COUNT_LSB 0 4560 #define WMI_VDEV_STATS_FTM_COUNT_MASK 0x7fffffff 4561 4562 struct wmi_vdev_stats { 4563 __le32 vdev_id; 4564 } __packed; 4565 4566 struct wmi_vdev_stats_extd { 4567 __le32 vdev_id; 4568 __le32 ppdu_aggr_cnt; 4569 __le32 ppdu_noack; 4570 __le32 mpdu_queued; 4571 __le32 ppdu_nonaggr_cnt; 4572 __le32 mpdu_sw_requeued; 4573 __le32 mpdu_suc_retry; 4574 __le32 mpdu_suc_multitry; 4575 __le32 mpdu_fail_retry; 4576 __le32 tx_ftm_suc; 4577 __le32 tx_ftm_suc_retry; 4578 __le32 tx_ftm_fail; 4579 __le32 rx_ftmr_cnt; 4580 __le32 rx_ftmr_dup_cnt; 4581 __le32 rx_iftmr_cnt; 4582 __le32 rx_iftmr_dup_cnt; 4583 __le32 reserved[6]; 4584 } __packed; 4585 4586 /* 4587 * peer statistics. 4588 * TODO: add more stats 4589 */ 4590 struct wmi_peer_stats { 4591 struct wmi_mac_addr peer_macaddr; 4592 __le32 peer_rssi; 4593 __le32 peer_tx_rate; 4594 } __packed; 4595 4596 struct wmi_10x_peer_stats { 4597 struct wmi_peer_stats old; 4598 __le32 peer_rx_rate; 4599 } __packed; 4600 4601 struct wmi_10_2_peer_stats { 4602 struct wmi_peer_stats old; 4603 __le32 peer_rx_rate; 4604 __le32 current_per; 4605 __le32 retries; 4606 __le32 tx_rate_count; 4607 __le32 max_4ms_frame_len; 4608 __le32 total_sub_frames; 4609 __le32 tx_bytes; 4610 __le32 num_pkt_loss_overflow[4]; 4611 __le32 num_pkt_loss_excess_retry[4]; 4612 } __packed; 4613 4614 struct wmi_10_2_4_peer_stats { 4615 struct wmi_10_2_peer_stats common; 4616 __le32 peer_rssi_changed; 4617 } __packed; 4618 4619 struct wmi_10_2_4_ext_peer_stats { 4620 struct wmi_10_2_peer_stats common; 4621 __le32 peer_rssi_changed; 4622 __le32 rx_duration; 4623 } __packed; 4624 4625 struct wmi_10_4_peer_stats { 4626 struct wmi_mac_addr peer_macaddr; 4627 __le32 peer_rssi; 4628 __le32 peer_rssi_seq_num; 4629 __le32 peer_tx_rate; 4630 __le32 peer_rx_rate; 4631 __le32 current_per; 4632 __le32 retries; 4633 __le32 tx_rate_count; 4634 __le32 max_4ms_frame_len; 4635 __le32 total_sub_frames; 4636 __le32 tx_bytes; 4637 __le32 num_pkt_loss_overflow[4]; 4638 __le32 num_pkt_loss_excess_retry[4]; 4639 __le32 peer_rssi_changed; 4640 } __packed; 4641 4642 struct wmi_10_4_peer_extd_stats { 4643 struct wmi_mac_addr peer_macaddr; 4644 __le32 inactive_time; 4645 __le32 peer_chain_rssi; 4646 __le32 rx_duration; 4647 __le32 reserved[10]; 4648 } __packed; 4649 4650 struct wmi_10_4_bss_bcn_stats { 4651 __le32 vdev_id; 4652 __le32 bss_bcns_dropped; 4653 __le32 bss_bcn_delivered; 4654 } __packed; 4655 4656 struct wmi_10_4_bss_bcn_filter_stats { 4657 __le32 bcns_dropped; 4658 __le32 bcns_delivered; 4659 __le32 active_filters; 4660 struct wmi_10_4_bss_bcn_stats bss_stats; 4661 } __packed; 4662 4663 struct wmi_10_2_pdev_ext_stats { 4664 __le32 rx_rssi_comb; 4665 __le32 rx_rssi[4]; 4666 __le32 rx_mcs[10]; 4667 __le32 tx_mcs[10]; 4668 __le32 ack_rssi; 4669 } __packed; 4670 4671 struct wmi_vdev_create_cmd { 4672 __le32 vdev_id; 4673 __le32 vdev_type; 4674 __le32 vdev_subtype; 4675 struct wmi_mac_addr vdev_macaddr; 4676 } __packed; 4677 4678 enum wmi_vdev_type { 4679 WMI_VDEV_TYPE_AP = 1, 4680 WMI_VDEV_TYPE_STA = 2, 4681 WMI_VDEV_TYPE_IBSS = 3, 4682 WMI_VDEV_TYPE_MONITOR = 4, 4683 }; 4684 4685 enum wmi_vdev_subtype { 4686 WMI_VDEV_SUBTYPE_NONE, 4687 WMI_VDEV_SUBTYPE_P2P_DEVICE, 4688 WMI_VDEV_SUBTYPE_P2P_CLIENT, 4689 WMI_VDEV_SUBTYPE_P2P_GO, 4690 WMI_VDEV_SUBTYPE_PROXY_STA, 4691 WMI_VDEV_SUBTYPE_MESH_11S, 4692 WMI_VDEV_SUBTYPE_MESH_NON_11S, 4693 }; 4694 4695 enum wmi_vdev_subtype_legacy { 4696 WMI_VDEV_SUBTYPE_LEGACY_NONE = 0, 4697 WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1, 4698 WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2, 4699 WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3, 4700 WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4, 4701 }; 4702 4703 enum wmi_vdev_subtype_10_2_4 { 4704 WMI_VDEV_SUBTYPE_10_2_4_NONE = 0, 4705 WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1, 4706 WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2, 4707 WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3, 4708 WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4, 4709 WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5, 4710 }; 4711 4712 enum wmi_vdev_subtype_10_4 { 4713 WMI_VDEV_SUBTYPE_10_4_NONE = 0, 4714 WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1, 4715 WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2, 4716 WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3, 4717 WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4, 4718 WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5, 4719 WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6, 4720 }; 4721 4722 /* values for vdev_subtype */ 4723 4724 /* values for vdev_start_request flags */ 4725 /* 4726 * Indicates that AP VDEV uses hidden ssid. only valid for 4727 * AP/GO 4728 */ 4729 #define WMI_VDEV_START_HIDDEN_SSID (1 << 0) 4730 /* 4731 * Indicates if robust management frame/management frame 4732 * protection is enabled. For GO/AP vdevs, it indicates that 4733 * it may support station/client associations with RMF enabled. 4734 * For STA/client vdevs, it indicates that sta will 4735 * associate with AP with RMF enabled. 4736 */ 4737 #define WMI_VDEV_START_PMF_ENABLED (1 << 1) 4738 4739 struct wmi_p2p_noa_descriptor { 4740 __le32 type_count; /* 255: continuous schedule, 0: reserved */ 4741 __le32 duration; /* Absent period duration in micro seconds */ 4742 __le32 interval; /* Absent period interval in micro seconds */ 4743 __le32 start_time; /* 32 bit tsf time when in starts */ 4744 } __packed; 4745 4746 struct wmi_vdev_start_request_cmd { 4747 /* WMI channel */ 4748 struct wmi_channel chan; 4749 /* unique id identifying the VDEV, generated by the caller */ 4750 __le32 vdev_id; 4751 /* requestor id identifying the caller module */ 4752 __le32 requestor_id; 4753 /* beacon interval from received beacon */ 4754 __le32 beacon_interval; 4755 /* DTIM Period from the received beacon */ 4756 __le32 dtim_period; 4757 /* Flags */ 4758 __le32 flags; 4759 /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ 4760 struct wmi_ssid ssid; 4761 /* beacon/probe response xmit rate. Applicable for SoftAP. */ 4762 __le32 bcn_tx_rate; 4763 /* beacon/probe response xmit power. Applicable for SoftAP. */ 4764 __le32 bcn_tx_power; 4765 /* number of p2p NOA descriptor(s) from scan entry */ 4766 __le32 num_noa_descriptors; 4767 /* 4768 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID. 4769 * During CAC, Our HW shouldn't ack ditected frames 4770 */ 4771 __le32 disable_hw_ack; 4772 /* actual p2p NOA descriptor from scan entry */ 4773 struct wmi_p2p_noa_descriptor noa_descriptors[2]; 4774 } __packed; 4775 4776 struct wmi_vdev_restart_request_cmd { 4777 struct wmi_vdev_start_request_cmd vdev_start_request_cmd; 4778 } __packed; 4779 4780 struct wmi_vdev_start_request_arg { 4781 u32 vdev_id; 4782 struct wmi_channel_arg channel; 4783 u32 bcn_intval; 4784 u32 dtim_period; 4785 u8 *ssid; 4786 u32 ssid_len; 4787 u32 bcn_tx_rate; 4788 u32 bcn_tx_power; 4789 bool disable_hw_ack; 4790 bool hidden_ssid; 4791 bool pmf_enabled; 4792 }; 4793 4794 struct wmi_vdev_delete_cmd { 4795 /* unique id identifying the VDEV, generated by the caller */ 4796 __le32 vdev_id; 4797 } __packed; 4798 4799 struct wmi_vdev_up_cmd { 4800 __le32 vdev_id; 4801 __le32 vdev_assoc_id; 4802 struct wmi_mac_addr vdev_bssid; 4803 } __packed; 4804 4805 struct wmi_vdev_stop_cmd { 4806 __le32 vdev_id; 4807 } __packed; 4808 4809 struct wmi_vdev_down_cmd { 4810 __le32 vdev_id; 4811 } __packed; 4812 4813 struct wmi_vdev_standby_response_cmd { 4814 /* unique id identifying the VDEV, generated by the caller */ 4815 __le32 vdev_id; 4816 } __packed; 4817 4818 struct wmi_vdev_resume_response_cmd { 4819 /* unique id identifying the VDEV, generated by the caller */ 4820 __le32 vdev_id; 4821 } __packed; 4822 4823 struct wmi_vdev_set_param_cmd { 4824 __le32 vdev_id; 4825 __le32 param_id; 4826 __le32 param_value; 4827 } __packed; 4828 4829 #define WMI_MAX_KEY_INDEX 3 4830 #define WMI_MAX_KEY_LEN 32 4831 4832 #define WMI_KEY_PAIRWISE 0x00 4833 #define WMI_KEY_GROUP 0x01 4834 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */ 4835 4836 struct wmi_key_seq_counter { 4837 __le32 key_seq_counter_l; 4838 __le32 key_seq_counter_h; 4839 } __packed; 4840 4841 #define WMI_CIPHER_NONE 0x0 /* clear key */ 4842 #define WMI_CIPHER_WEP 0x1 4843 #define WMI_CIPHER_TKIP 0x2 4844 #define WMI_CIPHER_AES_OCB 0x3 4845 #define WMI_CIPHER_AES_CCM 0x4 4846 #define WMI_CIPHER_WAPI 0x5 4847 #define WMI_CIPHER_CKIP 0x6 4848 #define WMI_CIPHER_AES_CMAC 0x7 4849 #define WMI_CIPHER_AES_GCM 0x8 4850 4851 struct wmi_vdev_install_key_cmd { 4852 __le32 vdev_id; 4853 struct wmi_mac_addr peer_macaddr; 4854 __le32 key_idx; 4855 __le32 key_flags; 4856 __le32 key_cipher; /* %WMI_CIPHER_ */ 4857 struct wmi_key_seq_counter key_rsc_counter; 4858 struct wmi_key_seq_counter key_global_rsc_counter; 4859 struct wmi_key_seq_counter key_tsc_counter; 4860 u8 wpi_key_rsc_counter[16]; 4861 u8 wpi_key_tsc_counter[16]; 4862 __le32 key_len; 4863 __le32 key_txmic_len; 4864 __le32 key_rxmic_len; 4865 4866 /* contains key followed by tx mic followed by rx mic */ 4867 u8 key_data[0]; 4868 } __packed; 4869 4870 struct wmi_vdev_install_key_arg { 4871 u32 vdev_id; 4872 const u8 *macaddr; 4873 u32 key_idx; 4874 u32 key_flags; 4875 u32 key_cipher; 4876 u32 key_len; 4877 u32 key_txmic_len; 4878 u32 key_rxmic_len; 4879 const void *key_data; 4880 }; 4881 4882 /* 4883 * vdev fixed rate format: 4884 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_ 4885 * - nss - b5:b4 - ss number (0 mean 1ss) 4886 * - rate_mcs - b3:b0 - as below 4887 * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps, 4888 * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s) 4889 * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps, 4890 * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps 4891 * HT/VHT: MCS index 4892 */ 4893 4894 /* Preamble types to be used with VDEV fixed rate configuration */ 4895 enum wmi_rate_preamble { 4896 WMI_RATE_PREAMBLE_OFDM, 4897 WMI_RATE_PREAMBLE_CCK, 4898 WMI_RATE_PREAMBLE_HT, 4899 WMI_RATE_PREAMBLE_VHT, 4900 }; 4901 4902 #define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3)) 4903 #define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3) 4904 #define ATH10K_HW_MCS_RATE(rate) ((rate) & 0xf) 4905 #define ATH10K_HW_LEGACY_RATE(rate) ((rate) & 0x3f) 4906 #define ATH10K_HW_BW(flags) (((flags) >> 3) & 0x3) 4907 #define ATH10K_HW_GI(flags) (((flags) >> 5) & 0x1) 4908 #define ATH10K_HW_RATECODE(rate, nss, preamble) \ 4909 (((preamble) << 6) | ((nss) << 4) | (rate)) 4910 4911 #define VHT_MCS_NUM 10 4912 #define VHT_BW_NUM 4 4913 #define VHT_NSS_NUM 4 4914 4915 /* Value to disable fixed rate setting */ 4916 #define WMI_FIXED_RATE_NONE (0xff) 4917 4918 struct wmi_vdev_param_map { 4919 u32 rts_threshold; 4920 u32 fragmentation_threshold; 4921 u32 beacon_interval; 4922 u32 listen_interval; 4923 u32 multicast_rate; 4924 u32 mgmt_tx_rate; 4925 u32 slot_time; 4926 u32 preamble; 4927 u32 swba_time; 4928 u32 wmi_vdev_stats_update_period; 4929 u32 wmi_vdev_pwrsave_ageout_time; 4930 u32 wmi_vdev_host_swba_interval; 4931 u32 dtim_period; 4932 u32 wmi_vdev_oc_scheduler_air_time_limit; 4933 u32 wds; 4934 u32 atim_window; 4935 u32 bmiss_count_max; 4936 u32 bmiss_first_bcnt; 4937 u32 bmiss_final_bcnt; 4938 u32 feature_wmm; 4939 u32 chwidth; 4940 u32 chextoffset; 4941 u32 disable_htprotection; 4942 u32 sta_quickkickout; 4943 u32 mgmt_rate; 4944 u32 protection_mode; 4945 u32 fixed_rate; 4946 u32 sgi; 4947 u32 ldpc; 4948 u32 tx_stbc; 4949 u32 rx_stbc; 4950 u32 intra_bss_fwd; 4951 u32 def_keyid; 4952 u32 nss; 4953 u32 bcast_data_rate; 4954 u32 mcast_data_rate; 4955 u32 mcast_indicate; 4956 u32 dhcp_indicate; 4957 u32 unknown_dest_indicate; 4958 u32 ap_keepalive_min_idle_inactive_time_secs; 4959 u32 ap_keepalive_max_idle_inactive_time_secs; 4960 u32 ap_keepalive_max_unresponsive_time_secs; 4961 u32 ap_enable_nawds; 4962 u32 mcast2ucast_set; 4963 u32 enable_rtscts; 4964 u32 txbf; 4965 u32 packet_powersave; 4966 u32 drop_unencry; 4967 u32 tx_encap_type; 4968 u32 ap_detect_out_of_sync_sleeping_sta_time_secs; 4969 u32 rc_num_retries; 4970 u32 cabq_maxdur; 4971 u32 mfptest_set; 4972 u32 rts_fixed_rate; 4973 u32 vht_sgimask; 4974 u32 vht80_ratemask; 4975 u32 early_rx_adjust_enable; 4976 u32 early_rx_tgt_bmiss_num; 4977 u32 early_rx_bmiss_sample_cycle; 4978 u32 early_rx_slop_step; 4979 u32 early_rx_init_slop; 4980 u32 early_rx_adjust_pause; 4981 u32 proxy_sta; 4982 u32 meru_vc; 4983 u32 rx_decap_type; 4984 u32 bw_nss_ratemask; 4985 u32 inc_tsf; 4986 u32 dec_tsf; 4987 }; 4988 4989 #define WMI_VDEV_PARAM_UNSUPPORTED 0 4990 4991 /* the definition of different VDEV parameters */ 4992 enum wmi_vdev_param { 4993 /* RTS Threshold */ 4994 WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1, 4995 /* Fragmentation threshold */ 4996 WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 4997 /* beacon interval in TUs */ 4998 WMI_VDEV_PARAM_BEACON_INTERVAL, 4999 /* Listen interval in TUs */ 5000 WMI_VDEV_PARAM_LISTEN_INTERVAL, 5001 /* multicast rate in Mbps */ 5002 WMI_VDEV_PARAM_MULTICAST_RATE, 5003 /* management frame rate in Mbps */ 5004 WMI_VDEV_PARAM_MGMT_TX_RATE, 5005 /* slot time (long vs short) */ 5006 WMI_VDEV_PARAM_SLOT_TIME, 5007 /* preamble (long vs short) */ 5008 WMI_VDEV_PARAM_PREAMBLE, 5009 /* SWBA time (time before tbtt in msec) */ 5010 WMI_VDEV_PARAM_SWBA_TIME, 5011 /* time period for updating VDEV stats */ 5012 WMI_VDEV_STATS_UPDATE_PERIOD, 5013 /* age out time in msec for frames queued for station in power save */ 5014 WMI_VDEV_PWRSAVE_AGEOUT_TIME, 5015 /* 5016 * Host SWBA interval (time in msec before tbtt for SWBA event 5017 * generation). 5018 */ 5019 WMI_VDEV_HOST_SWBA_INTERVAL, 5020 /* DTIM period (specified in units of num beacon intervals) */ 5021 WMI_VDEV_PARAM_DTIM_PERIOD, 5022 /* 5023 * scheduler air time limit for this VDEV. used by off chan 5024 * scheduler. 5025 */ 5026 WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5027 /* enable/dsiable WDS for this VDEV */ 5028 WMI_VDEV_PARAM_WDS, 5029 /* ATIM Window */ 5030 WMI_VDEV_PARAM_ATIM_WINDOW, 5031 /* BMISS max */ 5032 WMI_VDEV_PARAM_BMISS_COUNT_MAX, 5033 /* BMISS first time */ 5034 WMI_VDEV_PARAM_BMISS_FIRST_BCNT, 5035 /* BMISS final time */ 5036 WMI_VDEV_PARAM_BMISS_FINAL_BCNT, 5037 /* WMM enables/disabled */ 5038 WMI_VDEV_PARAM_FEATURE_WMM, 5039 /* Channel width */ 5040 WMI_VDEV_PARAM_CHWIDTH, 5041 /* Channel Offset */ 5042 WMI_VDEV_PARAM_CHEXTOFFSET, 5043 /* Disable HT Protection */ 5044 WMI_VDEV_PARAM_DISABLE_HTPROTECTION, 5045 /* Quick STA Kickout */ 5046 WMI_VDEV_PARAM_STA_QUICKKICKOUT, 5047 /* Rate to be used with Management frames */ 5048 WMI_VDEV_PARAM_MGMT_RATE, 5049 /* Protection Mode */ 5050 WMI_VDEV_PARAM_PROTECTION_MODE, 5051 /* Fixed rate setting */ 5052 WMI_VDEV_PARAM_FIXED_RATE, 5053 /* Short GI Enable/Disable */ 5054 WMI_VDEV_PARAM_SGI, 5055 /* Enable LDPC */ 5056 WMI_VDEV_PARAM_LDPC, 5057 /* Enable Tx STBC */ 5058 WMI_VDEV_PARAM_TX_STBC, 5059 /* Enable Rx STBC */ 5060 WMI_VDEV_PARAM_RX_STBC, 5061 /* Intra BSS forwarding */ 5062 WMI_VDEV_PARAM_INTRA_BSS_FWD, 5063 /* Setting Default xmit key for Vdev */ 5064 WMI_VDEV_PARAM_DEF_KEYID, 5065 /* NSS width */ 5066 WMI_VDEV_PARAM_NSS, 5067 /* Set the custom rate for the broadcast data frames */ 5068 WMI_VDEV_PARAM_BCAST_DATA_RATE, 5069 /* Set the custom rate (rate-code) for multicast data frames */ 5070 WMI_VDEV_PARAM_MCAST_DATA_RATE, 5071 /* Tx multicast packet indicate Enable/Disable */ 5072 WMI_VDEV_PARAM_MCAST_INDICATE, 5073 /* Tx DHCP packet indicate Enable/Disable */ 5074 WMI_VDEV_PARAM_DHCP_INDICATE, 5075 /* Enable host inspection of Tx unicast packet to unknown destination */ 5076 WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5077 5078 /* The minimum amount of time AP begins to consider STA inactive */ 5079 WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5080 5081 /* 5082 * An associated STA is considered inactive when there is no recent 5083 * TX/RX activity and no downlink frames are buffered for it. Once a 5084 * STA exceeds the maximum idle inactive time, the AP will send an 5085 * 802.11 data-null as a keep alive to verify the STA is still 5086 * associated. If the STA does ACK the data-null, or if the data-null 5087 * is buffered and the STA does not retrieve it, the STA will be 5088 * considered unresponsive 5089 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 5090 */ 5091 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5092 5093 /* 5094 * An associated STA is considered unresponsive if there is no recent 5095 * TX/RX activity and downlink frames are buffered for it. Once a STA 5096 * exceeds the maximum unresponsive time, the AP will send a 5097 * WMI_STA_KICKOUT event to the host so the STA can be deleted. 5098 */ 5099 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5100 5101 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 5102 WMI_VDEV_PARAM_AP_ENABLE_NAWDS, 5103 /* Enable/Disable RTS-CTS */ 5104 WMI_VDEV_PARAM_ENABLE_RTSCTS, 5105 /* Enable TXBFee/er */ 5106 WMI_VDEV_PARAM_TXBF, 5107 5108 /* Set packet power save */ 5109 WMI_VDEV_PARAM_PACKET_POWERSAVE, 5110 5111 /* 5112 * Drops un-encrypted packets if eceived in an encrypted connection 5113 * otherwise forwards to host. 5114 */ 5115 WMI_VDEV_PARAM_DROP_UNENCRY, 5116 5117 /* 5118 * Set the encapsulation type for frames. 5119 */ 5120 WMI_VDEV_PARAM_TX_ENCAP_TYPE, 5121 }; 5122 5123 /* the definition of different VDEV parameters */ 5124 enum wmi_10x_vdev_param { 5125 /* RTS Threshold */ 5126 WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5127 /* Fragmentation threshold */ 5128 WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5129 /* beacon interval in TUs */ 5130 WMI_10X_VDEV_PARAM_BEACON_INTERVAL, 5131 /* Listen interval in TUs */ 5132 WMI_10X_VDEV_PARAM_LISTEN_INTERVAL, 5133 /* multicast rate in Mbps */ 5134 WMI_10X_VDEV_PARAM_MULTICAST_RATE, 5135 /* management frame rate in Mbps */ 5136 WMI_10X_VDEV_PARAM_MGMT_TX_RATE, 5137 /* slot time (long vs short) */ 5138 WMI_10X_VDEV_PARAM_SLOT_TIME, 5139 /* preamble (long vs short) */ 5140 WMI_10X_VDEV_PARAM_PREAMBLE, 5141 /* SWBA time (time before tbtt in msec) */ 5142 WMI_10X_VDEV_PARAM_SWBA_TIME, 5143 /* time period for updating VDEV stats */ 5144 WMI_10X_VDEV_STATS_UPDATE_PERIOD, 5145 /* age out time in msec for frames queued for station in power save */ 5146 WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME, 5147 /* 5148 * Host SWBA interval (time in msec before tbtt for SWBA event 5149 * generation). 5150 */ 5151 WMI_10X_VDEV_HOST_SWBA_INTERVAL, 5152 /* DTIM period (specified in units of num beacon intervals) */ 5153 WMI_10X_VDEV_PARAM_DTIM_PERIOD, 5154 /* 5155 * scheduler air time limit for this VDEV. used by off chan 5156 * scheduler. 5157 */ 5158 WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5159 /* enable/dsiable WDS for this VDEV */ 5160 WMI_10X_VDEV_PARAM_WDS, 5161 /* ATIM Window */ 5162 WMI_10X_VDEV_PARAM_ATIM_WINDOW, 5163 /* BMISS max */ 5164 WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX, 5165 /* WMM enables/disabled */ 5166 WMI_10X_VDEV_PARAM_FEATURE_WMM, 5167 /* Channel width */ 5168 WMI_10X_VDEV_PARAM_CHWIDTH, 5169 /* Channel Offset */ 5170 WMI_10X_VDEV_PARAM_CHEXTOFFSET, 5171 /* Disable HT Protection */ 5172 WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION, 5173 /* Quick STA Kickout */ 5174 WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT, 5175 /* Rate to be used with Management frames */ 5176 WMI_10X_VDEV_PARAM_MGMT_RATE, 5177 /* Protection Mode */ 5178 WMI_10X_VDEV_PARAM_PROTECTION_MODE, 5179 /* Fixed rate setting */ 5180 WMI_10X_VDEV_PARAM_FIXED_RATE, 5181 /* Short GI Enable/Disable */ 5182 WMI_10X_VDEV_PARAM_SGI, 5183 /* Enable LDPC */ 5184 WMI_10X_VDEV_PARAM_LDPC, 5185 /* Enable Tx STBC */ 5186 WMI_10X_VDEV_PARAM_TX_STBC, 5187 /* Enable Rx STBC */ 5188 WMI_10X_VDEV_PARAM_RX_STBC, 5189 /* Intra BSS forwarding */ 5190 WMI_10X_VDEV_PARAM_INTRA_BSS_FWD, 5191 /* Setting Default xmit key for Vdev */ 5192 WMI_10X_VDEV_PARAM_DEF_KEYID, 5193 /* NSS width */ 5194 WMI_10X_VDEV_PARAM_NSS, 5195 /* Set the custom rate for the broadcast data frames */ 5196 WMI_10X_VDEV_PARAM_BCAST_DATA_RATE, 5197 /* Set the custom rate (rate-code) for multicast data frames */ 5198 WMI_10X_VDEV_PARAM_MCAST_DATA_RATE, 5199 /* Tx multicast packet indicate Enable/Disable */ 5200 WMI_10X_VDEV_PARAM_MCAST_INDICATE, 5201 /* Tx DHCP packet indicate Enable/Disable */ 5202 WMI_10X_VDEV_PARAM_DHCP_INDICATE, 5203 /* Enable host inspection of Tx unicast packet to unknown destination */ 5204 WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5205 5206 /* The minimum amount of time AP begins to consider STA inactive */ 5207 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5208 5209 /* 5210 * An associated STA is considered inactive when there is no recent 5211 * TX/RX activity and no downlink frames are buffered for it. Once a 5212 * STA exceeds the maximum idle inactive time, the AP will send an 5213 * 802.11 data-null as a keep alive to verify the STA is still 5214 * associated. If the STA does ACK the data-null, or if the data-null 5215 * is buffered and the STA does not retrieve it, the STA will be 5216 * considered unresponsive 5217 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 5218 */ 5219 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5220 5221 /* 5222 * An associated STA is considered unresponsive if there is no recent 5223 * TX/RX activity and downlink frames are buffered for it. Once a STA 5224 * exceeds the maximum unresponsive time, the AP will send a 5225 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. 5226 */ 5227 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5228 5229 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 5230 WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS, 5231 5232 WMI_10X_VDEV_PARAM_MCAST2UCAST_SET, 5233 /* Enable/Disable RTS-CTS */ 5234 WMI_10X_VDEV_PARAM_ENABLE_RTSCTS, 5235 5236 WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 5237 5238 /* following are available as of firmware 10.2 */ 5239 WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE, 5240 WMI_10X_VDEV_PARAM_CABQ_MAXDUR, 5241 WMI_10X_VDEV_PARAM_MFPTEST_SET, 5242 WMI_10X_VDEV_PARAM_RTS_FIXED_RATE, 5243 WMI_10X_VDEV_PARAM_VHT_SGIMASK, 5244 WMI_10X_VDEV_PARAM_VHT80_RATEMASK, 5245 WMI_10X_VDEV_PARAM_TSF_INCREMENT, 5246 }; 5247 5248 enum wmi_10_4_vdev_param { 5249 WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5250 WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5251 WMI_10_4_VDEV_PARAM_BEACON_INTERVAL, 5252 WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL, 5253 WMI_10_4_VDEV_PARAM_MULTICAST_RATE, 5254 WMI_10_4_VDEV_PARAM_MGMT_TX_RATE, 5255 WMI_10_4_VDEV_PARAM_SLOT_TIME, 5256 WMI_10_4_VDEV_PARAM_PREAMBLE, 5257 WMI_10_4_VDEV_PARAM_SWBA_TIME, 5258 WMI_10_4_VDEV_STATS_UPDATE_PERIOD, 5259 WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME, 5260 WMI_10_4_VDEV_HOST_SWBA_INTERVAL, 5261 WMI_10_4_VDEV_PARAM_DTIM_PERIOD, 5262 WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5263 WMI_10_4_VDEV_PARAM_WDS, 5264 WMI_10_4_VDEV_PARAM_ATIM_WINDOW, 5265 WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX, 5266 WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT, 5267 WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT, 5268 WMI_10_4_VDEV_PARAM_FEATURE_WMM, 5269 WMI_10_4_VDEV_PARAM_CHWIDTH, 5270 WMI_10_4_VDEV_PARAM_CHEXTOFFSET, 5271 WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION, 5272 WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT, 5273 WMI_10_4_VDEV_PARAM_MGMT_RATE, 5274 WMI_10_4_VDEV_PARAM_PROTECTION_MODE, 5275 WMI_10_4_VDEV_PARAM_FIXED_RATE, 5276 WMI_10_4_VDEV_PARAM_SGI, 5277 WMI_10_4_VDEV_PARAM_LDPC, 5278 WMI_10_4_VDEV_PARAM_TX_STBC, 5279 WMI_10_4_VDEV_PARAM_RX_STBC, 5280 WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD, 5281 WMI_10_4_VDEV_PARAM_DEF_KEYID, 5282 WMI_10_4_VDEV_PARAM_NSS, 5283 WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE, 5284 WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE, 5285 WMI_10_4_VDEV_PARAM_MCAST_INDICATE, 5286 WMI_10_4_VDEV_PARAM_DHCP_INDICATE, 5287 WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5288 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5289 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5290 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5291 WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS, 5292 WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET, 5293 WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS, 5294 WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES, 5295 WMI_10_4_VDEV_PARAM_TXBF, 5296 WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE, 5297 WMI_10_4_VDEV_PARAM_DROP_UNENCRY, 5298 WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE, 5299 WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 5300 WMI_10_4_VDEV_PARAM_CABQ_MAXDUR, 5301 WMI_10_4_VDEV_PARAM_MFPTEST_SET, 5302 WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE, 5303 WMI_10_4_VDEV_PARAM_VHT_SGIMASK, 5304 WMI_10_4_VDEV_PARAM_VHT80_RATEMASK, 5305 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE, 5306 WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM, 5307 WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE, 5308 WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP, 5309 WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP, 5310 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE, 5311 WMI_10_4_VDEV_PARAM_PROXY_STA, 5312 WMI_10_4_VDEV_PARAM_MERU_VC, 5313 WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE, 5314 WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK, 5315 WMI_10_4_VDEV_PARAM_SENSOR_AP, 5316 WMI_10_4_VDEV_PARAM_BEACON_RATE, 5317 WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS, 5318 WMI_10_4_VDEV_PARAM_STA_KICKOUT, 5319 WMI_10_4_VDEV_PARAM_CAPABILITIES, 5320 WMI_10_4_VDEV_PARAM_TSF_INCREMENT, 5321 WMI_10_4_VDEV_PARAM_RX_FILTER, 5322 WMI_10_4_VDEV_PARAM_MGMT_TX_POWER, 5323 WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY, 5324 WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS, 5325 WMI_10_4_VDEV_PARAM_TSF_DECREMENT, 5326 }; 5327 5328 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0) 5329 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1) 5330 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2) 5331 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3) 5332 5333 #define WMI_TXBF_STS_CAP_OFFSET_LSB 4 5334 #define WMI_TXBF_STS_CAP_OFFSET_MASK 0x70 5335 #define WMI_TXBF_CONF_IMPLICIT_BF BIT(7) 5336 #define WMI_BF_SOUND_DIM_OFFSET_LSB 8 5337 #define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00 5338 5339 /* slot time long */ 5340 #define WMI_VDEV_SLOT_TIME_LONG 0x1 5341 /* slot time short */ 5342 #define WMI_VDEV_SLOT_TIME_SHORT 0x2 5343 /* preablbe long */ 5344 #define WMI_VDEV_PREAMBLE_LONG 0x1 5345 /* preablbe short */ 5346 #define WMI_VDEV_PREAMBLE_SHORT 0x2 5347 5348 enum wmi_start_event_param { 5349 WMI_VDEV_RESP_START_EVENT = 0, 5350 WMI_VDEV_RESP_RESTART_EVENT, 5351 }; 5352 5353 struct wmi_vdev_start_response_event { 5354 __le32 vdev_id; 5355 __le32 req_id; 5356 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 5357 __le32 status; 5358 } __packed; 5359 5360 struct wmi_vdev_standby_req_event { 5361 /* unique id identifying the VDEV, generated by the caller */ 5362 __le32 vdev_id; 5363 } __packed; 5364 5365 struct wmi_vdev_resume_req_event { 5366 /* unique id identifying the VDEV, generated by the caller */ 5367 __le32 vdev_id; 5368 } __packed; 5369 5370 struct wmi_vdev_stopped_event { 5371 /* unique id identifying the VDEV, generated by the caller */ 5372 __le32 vdev_id; 5373 } __packed; 5374 5375 /* 5376 * common structure used for simple events 5377 * (stopped, resume_req, standby response) 5378 */ 5379 struct wmi_vdev_simple_event { 5380 /* unique id identifying the VDEV, generated by the caller */ 5381 __le32 vdev_id; 5382 } __packed; 5383 5384 /* VDEV start response status codes */ 5385 /* VDEV successfully started */ 5386 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 5387 5388 /* requested VDEV not found */ 5389 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1 5390 5391 /* unsupported VDEV combination */ 5392 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2 5393 5394 /* TODO: please add more comments if you have in-depth information */ 5395 struct wmi_vdev_spectral_conf_cmd { 5396 __le32 vdev_id; 5397 5398 /* number of fft samples to send (0 for infinite) */ 5399 __le32 scan_count; 5400 __le32 scan_period; 5401 __le32 scan_priority; 5402 5403 /* number of bins in the FFT: 2^(fft_size - bin_scale) */ 5404 __le32 scan_fft_size; 5405 __le32 scan_gc_ena; 5406 __le32 scan_restart_ena; 5407 __le32 scan_noise_floor_ref; 5408 __le32 scan_init_delay; 5409 __le32 scan_nb_tone_thr; 5410 __le32 scan_str_bin_thr; 5411 __le32 scan_wb_rpt_mode; 5412 __le32 scan_rssi_rpt_mode; 5413 __le32 scan_rssi_thr; 5414 __le32 scan_pwr_format; 5415 5416 /* rpt_mode: Format of FFT report to software for spectral scan 5417 * triggered FFTs: 5418 * 0: No FFT report (only spectral scan summary report) 5419 * 1: 2-dword summary of metrics for each completed FFT + spectral 5420 * scan summary report 5421 * 2: 2-dword summary of metrics for each completed FFT + 5422 * 1x- oversampled bins(in-band) per FFT + spectral scan summary 5423 * report 5424 * 3: 2-dword summary of metrics for each completed FFT + 5425 * 2x- oversampled bins (all) per FFT + spectral scan summary 5426 */ 5427 __le32 scan_rpt_mode; 5428 __le32 scan_bin_scale; 5429 __le32 scan_dbm_adj; 5430 __le32 scan_chn_mask; 5431 } __packed; 5432 5433 struct wmi_vdev_spectral_conf_arg { 5434 u32 vdev_id; 5435 u32 scan_count; 5436 u32 scan_period; 5437 u32 scan_priority; 5438 u32 scan_fft_size; 5439 u32 scan_gc_ena; 5440 u32 scan_restart_ena; 5441 u32 scan_noise_floor_ref; 5442 u32 scan_init_delay; 5443 u32 scan_nb_tone_thr; 5444 u32 scan_str_bin_thr; 5445 u32 scan_wb_rpt_mode; 5446 u32 scan_rssi_rpt_mode; 5447 u32 scan_rssi_thr; 5448 u32 scan_pwr_format; 5449 u32 scan_rpt_mode; 5450 u32 scan_bin_scale; 5451 u32 scan_dbm_adj; 5452 u32 scan_chn_mask; 5453 }; 5454 5455 #define WMI_SPECTRAL_ENABLE_DEFAULT 0 5456 #define WMI_SPECTRAL_COUNT_DEFAULT 0 5457 #define WMI_SPECTRAL_PERIOD_DEFAULT 35 5458 #define WMI_SPECTRAL_PRIORITY_DEFAULT 1 5459 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7 5460 #define WMI_SPECTRAL_GC_ENA_DEFAULT 1 5461 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0 5462 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96 5463 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80 5464 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12 5465 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8 5466 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0 5467 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0 5468 #define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0 5469 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0 5470 #define WMI_SPECTRAL_RPT_MODE_DEFAULT 2 5471 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1 5472 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1 5473 #define WMI_SPECTRAL_CHN_MASK_DEFAULT 1 5474 5475 struct wmi_vdev_spectral_enable_cmd { 5476 __le32 vdev_id; 5477 __le32 trigger_cmd; 5478 __le32 enable_cmd; 5479 } __packed; 5480 5481 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1 5482 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2 5483 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1 5484 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2 5485 5486 /* Beacon processing related command and event structures */ 5487 struct wmi_bcn_tx_hdr { 5488 __le32 vdev_id; 5489 __le32 tx_rate; 5490 __le32 tx_power; 5491 __le32 bcn_len; 5492 } __packed; 5493 5494 struct wmi_bcn_tx_cmd { 5495 struct wmi_bcn_tx_hdr hdr; 5496 u8 *bcn[0]; 5497 } __packed; 5498 5499 struct wmi_bcn_tx_arg { 5500 u32 vdev_id; 5501 u32 tx_rate; 5502 u32 tx_power; 5503 u32 bcn_len; 5504 const void *bcn; 5505 }; 5506 5507 enum wmi_bcn_tx_ref_flags { 5508 WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1, 5509 WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2, 5510 }; 5511 5512 /* TODO: It is unclear why "no antenna" works while any other seemingly valid 5513 * chainmask yields no beacons on the air at all. 5514 */ 5515 #define WMI_BCN_TX_REF_DEF_ANTENNA 0 5516 5517 struct wmi_bcn_tx_ref_cmd { 5518 __le32 vdev_id; 5519 __le32 data_len; 5520 /* physical address of the frame - dma pointer */ 5521 __le32 data_ptr; 5522 /* id for host to track */ 5523 __le32 msdu_id; 5524 /* frame ctrl to setup PPDU desc */ 5525 __le32 frame_control; 5526 /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */ 5527 __le32 flags; 5528 /* introduced in 10.2 */ 5529 __le32 antenna_mask; 5530 } __packed; 5531 5532 /* Beacon filter */ 5533 #define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */ 5534 #define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */ 5535 #define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */ 5536 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */ 5537 #define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */ 5538 5539 struct wmi_bcn_filter_rx_cmd { 5540 /* Filter ID */ 5541 __le32 bcn_filter_id; 5542 /* Filter type - wmi_bcn_filter */ 5543 __le32 bcn_filter; 5544 /* Buffer len */ 5545 __le32 bcn_filter_len; 5546 /* Filter info (threshold, BSSID, RSSI) */ 5547 u8 *bcn_filter_buf; 5548 } __packed; 5549 5550 /* Capabilities and IEs to be passed to firmware */ 5551 struct wmi_bcn_prb_info { 5552 /* Capabilities */ 5553 __le32 caps; 5554 /* ERP info */ 5555 __le32 erp; 5556 /* Advanced capabilities */ 5557 /* HT capabilities */ 5558 /* HT Info */ 5559 /* ibss_dfs */ 5560 /* wpa Info */ 5561 /* rsn Info */ 5562 /* rrm info */ 5563 /* ath_ext */ 5564 /* app IE */ 5565 } __packed; 5566 5567 struct wmi_bcn_tmpl_cmd { 5568 /* unique id identifying the VDEV, generated by the caller */ 5569 __le32 vdev_id; 5570 /* TIM IE offset from the beginning of the template. */ 5571 __le32 tim_ie_offset; 5572 /* beacon probe capabilities and IEs */ 5573 struct wmi_bcn_prb_info bcn_prb_info; 5574 /* beacon buffer length */ 5575 __le32 buf_len; 5576 /* variable length data */ 5577 u8 data[1]; 5578 } __packed; 5579 5580 struct wmi_prb_tmpl_cmd { 5581 /* unique id identifying the VDEV, generated by the caller */ 5582 __le32 vdev_id; 5583 /* beacon probe capabilities and IEs */ 5584 struct wmi_bcn_prb_info bcn_prb_info; 5585 /* beacon buffer length */ 5586 __le32 buf_len; 5587 /* Variable length data */ 5588 u8 data[1]; 5589 } __packed; 5590 5591 enum wmi_sta_ps_mode { 5592 /* enable power save for the given STA VDEV */ 5593 WMI_STA_PS_MODE_DISABLED = 0, 5594 /* disable power save for a given STA VDEV */ 5595 WMI_STA_PS_MODE_ENABLED = 1, 5596 }; 5597 5598 struct wmi_sta_powersave_mode_cmd { 5599 /* unique id identifying the VDEV, generated by the caller */ 5600 __le32 vdev_id; 5601 5602 /* 5603 * Power save mode 5604 * (see enum wmi_sta_ps_mode) 5605 */ 5606 __le32 sta_ps_mode; 5607 } __packed; 5608 5609 enum wmi_csa_offload_en { 5610 WMI_CSA_OFFLOAD_DISABLE = 0, 5611 WMI_CSA_OFFLOAD_ENABLE = 1, 5612 }; 5613 5614 struct wmi_csa_offload_enable_cmd { 5615 __le32 vdev_id; 5616 __le32 csa_offload_enable; 5617 } __packed; 5618 5619 struct wmi_csa_offload_chanswitch_cmd { 5620 __le32 vdev_id; 5621 struct wmi_channel chan; 5622 } __packed; 5623 5624 /* 5625 * This parameter controls the policy for retrieving frames from AP while the 5626 * STA is in sleep state. 5627 * 5628 * Only takes affect if the sta_ps_mode is enabled 5629 */ 5630 enum wmi_sta_ps_param_rx_wake_policy { 5631 /* 5632 * Wake up when ever there is an RX activity on the VDEV. In this mode 5633 * the Power save SM(state machine) will come out of sleep by either 5634 * sending null frame (or) a data frame (with PS==0) in response to TIM 5635 * bit set in the received beacon frame from AP. 5636 */ 5637 WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0, 5638 5639 /* 5640 * Here the power save state machine will not wakeup in response to TIM 5641 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD 5642 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all 5643 * access categories are delivery-enabled, the station will send a 5644 * UAPSD trigger frame, otherwise it will send a PS-Poll. 5645 */ 5646 WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, 5647 }; 5648 5649 /* 5650 * Number of tx frames/beacon that cause the power save SM to wake up. 5651 * 5652 * Value 1 causes the SM to wake up for every TX. Value 0 has a special 5653 * meaning, It will cause the SM to never wake up. This is useful if you want 5654 * to keep the system to sleep all the time for some kind of test mode . host 5655 * can change this parameter any time. It will affect at the next tx frame. 5656 */ 5657 enum wmi_sta_ps_param_tx_wake_threshold { 5658 WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, 5659 WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, 5660 5661 /* 5662 * Values greater than one indicate that many TX attempts per beacon 5663 * interval before the STA will wake up 5664 */ 5665 }; 5666 5667 /* 5668 * The maximum number of PS-Poll frames the FW will send in response to 5669 * traffic advertised in TIM before waking up (by sending a null frame with PS 5670 * = 0). Value 0 has a special meaning: there is no maximum count and the FW 5671 * will send as many PS-Poll as are necessary to retrieve buffered BU. This 5672 * parameter is used when the RX wake policy is 5673 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake 5674 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE. 5675 */ 5676 enum wmi_sta_ps_param_pspoll_count { 5677 WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0, 5678 /* 5679 * Values greater than 0 indicate the maximum numer of PS-Poll frames 5680 * FW will send before waking up. 5681 */ 5682 5683 /* When u-APSD is enabled the firmware will be very reluctant to exit 5684 * STA PS. This could result in very poor Rx performance with STA doing 5685 * PS-Poll for each and every buffered frame. This value is a bit 5686 * arbitrary. 5687 */ 5688 WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3, 5689 }; 5690 5691 /* 5692 * This will include the delivery and trigger enabled state for every AC. 5693 * This is the negotiated state with AP. The host MLME needs to set this based 5694 * on AP capability and the state Set in the association request by the 5695 * station MLME.Lower 8 bits of the value specify the UAPSD configuration. 5696 */ 5697 #define WMI_UAPSD_AC_TYPE_DELI 0 5698 #define WMI_UAPSD_AC_TYPE_TRIG 1 5699 5700 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \ 5701 (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1)) 5702 5703 enum wmi_sta_ps_param_uapsd { 5704 WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5705 WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5706 WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5707 WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5708 WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5709 WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5710 WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5711 WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5712 }; 5713 5714 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX 5715 5716 struct wmi_sta_uapsd_auto_trig_param { 5717 __le32 wmm_ac; 5718 __le32 user_priority; 5719 __le32 service_interval; 5720 __le32 suspend_interval; 5721 __le32 delay_interval; 5722 }; 5723 5724 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param { 5725 __le32 vdev_id; 5726 struct wmi_mac_addr peer_macaddr; 5727 __le32 num_ac; 5728 }; 5729 5730 struct wmi_sta_uapsd_auto_trig_arg { 5731 u32 wmm_ac; 5732 u32 user_priority; 5733 u32 service_interval; 5734 u32 suspend_interval; 5735 u32 delay_interval; 5736 }; 5737 5738 enum wmi_sta_powersave_param { 5739 /* 5740 * Controls how frames are retrievd from AP while STA is sleeping 5741 * 5742 * (see enum wmi_sta_ps_param_rx_wake_policy) 5743 */ 5744 WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0, 5745 5746 /* 5747 * The STA will go active after this many TX 5748 * 5749 * (see enum wmi_sta_ps_param_tx_wake_threshold) 5750 */ 5751 WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, 5752 5753 /* 5754 * Number of PS-Poll to send before STA wakes up 5755 * 5756 * (see enum wmi_sta_ps_param_pspoll_count) 5757 * 5758 */ 5759 WMI_STA_PS_PARAM_PSPOLL_COUNT = 2, 5760 5761 /* 5762 * TX/RX inactivity time in msec before going to sleep. 5763 * 5764 * The power save SM will monitor tx/rx activity on the VDEV, if no 5765 * activity for the specified msec of the parameter the Power save 5766 * SM will go to sleep. 5767 */ 5768 WMI_STA_PS_PARAM_INACTIVITY_TIME = 3, 5769 5770 /* 5771 * Set uapsd configuration. 5772 * 5773 * (see enum wmi_sta_ps_param_uapsd) 5774 */ 5775 WMI_STA_PS_PARAM_UAPSD = 4, 5776 }; 5777 5778 struct wmi_sta_powersave_param_cmd { 5779 __le32 vdev_id; 5780 __le32 param_id; /* %WMI_STA_PS_PARAM_ */ 5781 __le32 param_value; 5782 } __packed; 5783 5784 /* No MIMO power save */ 5785 #define WMI_STA_MIMO_PS_MODE_DISABLE 5786 /* mimo powersave mode static*/ 5787 #define WMI_STA_MIMO_PS_MODE_STATIC 5788 /* mimo powersave mode dynamic */ 5789 #define WMI_STA_MIMO_PS_MODE_DYNAMIC 5790 5791 struct wmi_sta_mimo_ps_mode_cmd { 5792 /* unique id identifying the VDEV, generated by the caller */ 5793 __le32 vdev_id; 5794 /* mimo powersave mode as defined above */ 5795 __le32 mimo_pwrsave_mode; 5796 } __packed; 5797 5798 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */ 5799 enum wmi_ap_ps_param_uapsd { 5800 WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5801 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5802 WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5803 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5804 WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5805 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5806 WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5807 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5808 }; 5809 5810 /* U-APSD maximum service period of peer station */ 5811 enum wmi_ap_ps_peer_param_max_sp { 5812 WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, 5813 WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1, 5814 WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2, 5815 WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3, 5816 MAX_WMI_AP_PS_PEER_PARAM_MAX_SP, 5817 }; 5818 5819 /* 5820 * AP power save parameter 5821 * Set a power save specific parameter for a peer station 5822 */ 5823 enum wmi_ap_ps_peer_param { 5824 /* Set uapsd configuration for a given peer. 5825 * 5826 * Include the delivery and trigger enabled state for every AC. 5827 * The host MLME needs to set this based on AP capability and stations 5828 * request Set in the association request received from the station. 5829 * 5830 * Lower 8 bits of the value specify the UAPSD configuration. 5831 * 5832 * (see enum wmi_ap_ps_param_uapsd) 5833 * The default value is 0. 5834 */ 5835 WMI_AP_PS_PEER_PARAM_UAPSD = 0, 5836 5837 /* 5838 * Set the service period for a UAPSD capable station 5839 * 5840 * The service period from wme ie in the (re)assoc request frame. 5841 * 5842 * (see enum wmi_ap_ps_peer_param_max_sp) 5843 */ 5844 WMI_AP_PS_PEER_PARAM_MAX_SP = 1, 5845 5846 /* Time in seconds for aging out buffered frames for STA in PS */ 5847 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, 5848 }; 5849 5850 struct wmi_ap_ps_peer_cmd { 5851 /* unique id identifying the VDEV, generated by the caller */ 5852 __le32 vdev_id; 5853 5854 /* peer MAC address */ 5855 struct wmi_mac_addr peer_macaddr; 5856 5857 /* AP powersave param (see enum wmi_ap_ps_peer_param) */ 5858 __le32 param_id; 5859 5860 /* AP powersave param value */ 5861 __le32 param_value; 5862 } __packed; 5863 5864 /* 128 clients = 4 words */ 5865 #define WMI_TIM_BITMAP_ARRAY_SIZE 4 5866 5867 struct wmi_tim_info { 5868 __le32 tim_len; 5869 __le32 tim_mcast; 5870 __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE]; 5871 __le32 tim_changed; 5872 __le32 tim_num_ps_pending; 5873 } __packed; 5874 5875 struct wmi_tim_info_arg { 5876 __le32 tim_len; 5877 __le32 tim_mcast; 5878 const __le32 *tim_bitmap; 5879 __le32 tim_changed; 5880 __le32 tim_num_ps_pending; 5881 } __packed; 5882 5883 /* Maximum number of NOA Descriptors supported */ 5884 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4 5885 #define WMI_P2P_OPPPS_ENABLE_BIT BIT(0) 5886 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1 5887 #define WMI_P2P_NOA_CHANGED_BIT BIT(0) 5888 5889 struct wmi_p2p_noa_info { 5890 /* Bit 0 - Flag to indicate an update in NOA schedule 5891 * Bits 7-1 - Reserved 5892 */ 5893 u8 changed; 5894 /* NOA index */ 5895 u8 index; 5896 /* Bit 0 - Opp PS state of the AP 5897 * Bits 1-7 - Ctwindow in TUs 5898 */ 5899 u8 ctwindow_oppps; 5900 /* Number of NOA descriptors */ 5901 u8 num_descriptors; 5902 5903 struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS]; 5904 } __packed; 5905 5906 struct wmi_bcn_info { 5907 struct wmi_tim_info tim_info; 5908 struct wmi_p2p_noa_info p2p_noa_info; 5909 } __packed; 5910 5911 struct wmi_host_swba_event { 5912 __le32 vdev_map; 5913 struct wmi_bcn_info bcn_info[0]; 5914 } __packed; 5915 5916 struct wmi_10_2_4_bcn_info { 5917 struct wmi_tim_info tim_info; 5918 /* The 10.2.4 FW doesn't have p2p NOA info */ 5919 } __packed; 5920 5921 struct wmi_10_2_4_host_swba_event { 5922 __le32 vdev_map; 5923 struct wmi_10_2_4_bcn_info bcn_info[0]; 5924 } __packed; 5925 5926 /* 16 words = 512 client + 1 word = for guard */ 5927 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17 5928 5929 struct wmi_10_4_tim_info { 5930 __le32 tim_len; 5931 __le32 tim_mcast; 5932 __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE]; 5933 __le32 tim_changed; 5934 __le32 tim_num_ps_pending; 5935 } __packed; 5936 5937 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1 5938 5939 struct wmi_10_4_p2p_noa_info { 5940 /* Bit 0 - Flag to indicate an update in NOA schedule 5941 * Bits 7-1 - Reserved 5942 */ 5943 u8 changed; 5944 /* NOA index */ 5945 u8 index; 5946 /* Bit 0 - Opp PS state of the AP 5947 * Bits 1-7 - Ctwindow in TUs 5948 */ 5949 u8 ctwindow_oppps; 5950 /* Number of NOA descriptors */ 5951 u8 num_descriptors; 5952 5953 struct wmi_p2p_noa_descriptor 5954 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS]; 5955 } __packed; 5956 5957 struct wmi_10_4_bcn_info { 5958 struct wmi_10_4_tim_info tim_info; 5959 struct wmi_10_4_p2p_noa_info p2p_noa_info; 5960 } __packed; 5961 5962 struct wmi_10_4_host_swba_event { 5963 __le32 vdev_map; 5964 struct wmi_10_4_bcn_info bcn_info[0]; 5965 } __packed; 5966 5967 #define WMI_MAX_AP_VDEV 16 5968 5969 struct wmi_tbtt_offset_event { 5970 __le32 vdev_map; 5971 __le32 tbttoffset_list[WMI_MAX_AP_VDEV]; 5972 } __packed; 5973 5974 struct wmi_peer_create_cmd { 5975 __le32 vdev_id; 5976 struct wmi_mac_addr peer_macaddr; 5977 __le32 peer_type; 5978 } __packed; 5979 5980 enum wmi_peer_type { 5981 WMI_PEER_TYPE_DEFAULT = 0, 5982 WMI_PEER_TYPE_BSS = 1, 5983 WMI_PEER_TYPE_TDLS = 2, 5984 }; 5985 5986 struct wmi_peer_delete_cmd { 5987 __le32 vdev_id; 5988 struct wmi_mac_addr peer_macaddr; 5989 } __packed; 5990 5991 struct wmi_peer_flush_tids_cmd { 5992 __le32 vdev_id; 5993 struct wmi_mac_addr peer_macaddr; 5994 __le32 peer_tid_bitmap; 5995 } __packed; 5996 5997 struct wmi_fixed_rate { 5998 /* 5999 * rate mode . 0: disable fixed rate (auto rate) 6000 * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps 6001 * 2: ht20 11n rate specified as mcs index 6002 * 3: ht40 11n rate specified as mcs index 6003 */ 6004 __le32 rate_mode; 6005 /* 6006 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB) 6007 * and series 3 is stored at byte 3 (MSB) 6008 */ 6009 __le32 rate_series; 6010 /* 6011 * 4 retry counts for 4 rate series. retry count for rate 0 is stored 6012 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3 6013 * (MSB) 6014 */ 6015 __le32 rate_retries; 6016 } __packed; 6017 6018 struct wmi_peer_fixed_rate_cmd { 6019 /* unique id identifying the VDEV, generated by the caller */ 6020 __le32 vdev_id; 6021 /* peer MAC address */ 6022 struct wmi_mac_addr peer_macaddr; 6023 /* fixed rate */ 6024 struct wmi_fixed_rate peer_fixed_rate; 6025 } __packed; 6026 6027 #define WMI_MGMT_TID 17 6028 6029 struct wmi_addba_clear_resp_cmd { 6030 /* unique id identifying the VDEV, generated by the caller */ 6031 __le32 vdev_id; 6032 /* peer MAC address */ 6033 struct wmi_mac_addr peer_macaddr; 6034 } __packed; 6035 6036 struct wmi_addba_send_cmd { 6037 /* unique id identifying the VDEV, generated by the caller */ 6038 __le32 vdev_id; 6039 /* peer MAC address */ 6040 struct wmi_mac_addr peer_macaddr; 6041 /* Tid number */ 6042 __le32 tid; 6043 /* Buffer/Window size*/ 6044 __le32 buffersize; 6045 } __packed; 6046 6047 struct wmi_delba_send_cmd { 6048 /* unique id identifying the VDEV, generated by the caller */ 6049 __le32 vdev_id; 6050 /* peer MAC address */ 6051 struct wmi_mac_addr peer_macaddr; 6052 /* Tid number */ 6053 __le32 tid; 6054 /* Is Initiator */ 6055 __le32 initiator; 6056 /* Reason code */ 6057 __le32 reasoncode; 6058 } __packed; 6059 6060 struct wmi_addba_setresponse_cmd { 6061 /* unique id identifying the vdev, generated by the caller */ 6062 __le32 vdev_id; 6063 /* peer mac address */ 6064 struct wmi_mac_addr peer_macaddr; 6065 /* Tid number */ 6066 __le32 tid; 6067 /* status code */ 6068 __le32 statuscode; 6069 } __packed; 6070 6071 struct wmi_send_singleamsdu_cmd { 6072 /* unique id identifying the vdev, generated by the caller */ 6073 __le32 vdev_id; 6074 /* peer mac address */ 6075 struct wmi_mac_addr peer_macaddr; 6076 /* Tid number */ 6077 __le32 tid; 6078 } __packed; 6079 6080 enum wmi_peer_smps_state { 6081 WMI_PEER_SMPS_PS_NONE = 0x0, 6082 WMI_PEER_SMPS_STATIC = 0x1, 6083 WMI_PEER_SMPS_DYNAMIC = 0x2 6084 }; 6085 6086 enum wmi_peer_chwidth { 6087 WMI_PEER_CHWIDTH_20MHZ = 0, 6088 WMI_PEER_CHWIDTH_40MHZ = 1, 6089 WMI_PEER_CHWIDTH_80MHZ = 2, 6090 WMI_PEER_CHWIDTH_160MHZ = 3, 6091 }; 6092 6093 enum wmi_peer_param { 6094 WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */ 6095 WMI_PEER_AMPDU = 0x2, 6096 WMI_PEER_AUTHORIZE = 0x3, 6097 WMI_PEER_CHAN_WIDTH = 0x4, 6098 WMI_PEER_NSS = 0x5, 6099 WMI_PEER_USE_4ADDR = 0x6, 6100 WMI_PEER_DEBUG = 0xa, 6101 WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */ 6102 }; 6103 6104 struct wmi_peer_set_param_cmd { 6105 __le32 vdev_id; 6106 struct wmi_mac_addr peer_macaddr; 6107 __le32 param_id; 6108 __le32 param_value; 6109 } __packed; 6110 6111 #define MAX_SUPPORTED_RATES 128 6112 6113 struct wmi_rate_set { 6114 /* total number of rates */ 6115 __le32 num_rates; 6116 /* 6117 * rates (each 8bit value) packed into a 32 bit word. 6118 * the rates are filled from least significant byte to most 6119 * significant byte. 6120 */ 6121 __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1]; 6122 } __packed; 6123 6124 struct wmi_rate_set_arg { 6125 unsigned int num_rates; 6126 u8 rates[MAX_SUPPORTED_RATES]; 6127 }; 6128 6129 /* 6130 * NOTE: It would bea good idea to represent the Tx MCS 6131 * info in one word and Rx in another word. This is split 6132 * into multiple words for convenience 6133 */ 6134 struct wmi_vht_rate_set { 6135 __le32 rx_max_rate; /* Max Rx data rate */ 6136 __le32 rx_mcs_set; /* Negotiated RX VHT rates */ 6137 __le32 tx_max_rate; /* Max Tx data rate */ 6138 __le32 tx_mcs_set; /* Negotiated TX VHT rates */ 6139 } __packed; 6140 6141 struct wmi_vht_rate_set_arg { 6142 u32 rx_max_rate; 6143 u32 rx_mcs_set; 6144 u32 tx_max_rate; 6145 u32 tx_mcs_set; 6146 }; 6147 6148 struct wmi_peer_set_rates_cmd { 6149 /* peer MAC address */ 6150 struct wmi_mac_addr peer_macaddr; 6151 /* legacy rate set */ 6152 struct wmi_rate_set peer_legacy_rates; 6153 /* ht rate set */ 6154 struct wmi_rate_set peer_ht_rates; 6155 } __packed; 6156 6157 struct wmi_peer_set_q_empty_callback_cmd { 6158 /* unique id identifying the VDEV, generated by the caller */ 6159 __le32 vdev_id; 6160 /* peer MAC address */ 6161 struct wmi_mac_addr peer_macaddr; 6162 __le32 callback_enable; 6163 } __packed; 6164 6165 struct wmi_peer_flags_map { 6166 u32 auth; 6167 u32 qos; 6168 u32 need_ptk_4_way; 6169 u32 need_gtk_2_way; 6170 u32 apsd; 6171 u32 ht; 6172 u32 bw40; 6173 u32 stbc; 6174 u32 ldbc; 6175 u32 dyn_mimops; 6176 u32 static_mimops; 6177 u32 spatial_mux; 6178 u32 vht; 6179 u32 bw80; 6180 u32 vht_2g; 6181 u32 pmf; 6182 u32 bw160; 6183 }; 6184 6185 enum wmi_peer_flags { 6186 WMI_PEER_AUTH = 0x00000001, 6187 WMI_PEER_QOS = 0x00000002, 6188 WMI_PEER_NEED_PTK_4_WAY = 0x00000004, 6189 WMI_PEER_NEED_GTK_2_WAY = 0x00000010, 6190 WMI_PEER_APSD = 0x00000800, 6191 WMI_PEER_HT = 0x00001000, 6192 WMI_PEER_40MHZ = 0x00002000, 6193 WMI_PEER_STBC = 0x00008000, 6194 WMI_PEER_LDPC = 0x00010000, 6195 WMI_PEER_DYN_MIMOPS = 0x00020000, 6196 WMI_PEER_STATIC_MIMOPS = 0x00040000, 6197 WMI_PEER_SPATIAL_MUX = 0x00200000, 6198 WMI_PEER_VHT = 0x02000000, 6199 WMI_PEER_80MHZ = 0x04000000, 6200 WMI_PEER_VHT_2G = 0x08000000, 6201 WMI_PEER_PMF = 0x10000000, 6202 WMI_PEER_160MHZ = 0x20000000 6203 }; 6204 6205 enum wmi_10x_peer_flags { 6206 WMI_10X_PEER_AUTH = 0x00000001, 6207 WMI_10X_PEER_QOS = 0x00000002, 6208 WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004, 6209 WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010, 6210 WMI_10X_PEER_APSD = 0x00000800, 6211 WMI_10X_PEER_HT = 0x00001000, 6212 WMI_10X_PEER_40MHZ = 0x00002000, 6213 WMI_10X_PEER_STBC = 0x00008000, 6214 WMI_10X_PEER_LDPC = 0x00010000, 6215 WMI_10X_PEER_DYN_MIMOPS = 0x00020000, 6216 WMI_10X_PEER_STATIC_MIMOPS = 0x00040000, 6217 WMI_10X_PEER_SPATIAL_MUX = 0x00200000, 6218 WMI_10X_PEER_VHT = 0x02000000, 6219 WMI_10X_PEER_80MHZ = 0x04000000, 6220 WMI_10X_PEER_160MHZ = 0x20000000 6221 }; 6222 6223 enum wmi_10_2_peer_flags { 6224 WMI_10_2_PEER_AUTH = 0x00000001, 6225 WMI_10_2_PEER_QOS = 0x00000002, 6226 WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004, 6227 WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010, 6228 WMI_10_2_PEER_APSD = 0x00000800, 6229 WMI_10_2_PEER_HT = 0x00001000, 6230 WMI_10_2_PEER_40MHZ = 0x00002000, 6231 WMI_10_2_PEER_STBC = 0x00008000, 6232 WMI_10_2_PEER_LDPC = 0x00010000, 6233 WMI_10_2_PEER_DYN_MIMOPS = 0x00020000, 6234 WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000, 6235 WMI_10_2_PEER_SPATIAL_MUX = 0x00200000, 6236 WMI_10_2_PEER_VHT = 0x02000000, 6237 WMI_10_2_PEER_80MHZ = 0x04000000, 6238 WMI_10_2_PEER_VHT_2G = 0x08000000, 6239 WMI_10_2_PEER_PMF = 0x10000000, 6240 WMI_10_2_PEER_160MHZ = 0x20000000 6241 }; 6242 6243 /* 6244 * Peer rate capabilities. 6245 * 6246 * This is of interest to the ratecontrol 6247 * module which resides in the firmware. The bit definitions are 6248 * consistent with that defined in if_athrate.c. 6249 */ 6250 #define WMI_RC_DS_FLAG 0x01 6251 #define WMI_RC_CW40_FLAG 0x02 6252 #define WMI_RC_SGI_FLAG 0x04 6253 #define WMI_RC_HT_FLAG 0x08 6254 #define WMI_RC_RTSCTS_FLAG 0x10 6255 #define WMI_RC_TX_STBC_FLAG 0x20 6256 #define WMI_RC_RX_STBC_FLAG 0xC0 6257 #define WMI_RC_RX_STBC_FLAG_S 6 6258 #define WMI_RC_WEP_TKIP_FLAG 0x100 6259 #define WMI_RC_TS_FLAG 0x200 6260 #define WMI_RC_UAPSD_FLAG 0x400 6261 6262 /* Maximum listen interval supported by hw in units of beacon interval */ 6263 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5 6264 6265 struct wmi_common_peer_assoc_complete_cmd { 6266 struct wmi_mac_addr peer_macaddr; 6267 __le32 vdev_id; 6268 __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */ 6269 __le32 peer_associd; /* 16 LSBs */ 6270 __le32 peer_flags; 6271 __le32 peer_caps; /* 16 LSBs */ 6272 __le32 peer_listen_intval; 6273 __le32 peer_ht_caps; 6274 __le32 peer_max_mpdu; 6275 __le32 peer_mpdu_density; /* 0..16 */ 6276 __le32 peer_rate_caps; 6277 struct wmi_rate_set peer_legacy_rates; 6278 struct wmi_rate_set peer_ht_rates; 6279 __le32 peer_nss; /* num of spatial streams */ 6280 __le32 peer_vht_caps; 6281 __le32 peer_phymode; 6282 struct wmi_vht_rate_set peer_vht_rates; 6283 }; 6284 6285 struct wmi_main_peer_assoc_complete_cmd { 6286 struct wmi_common_peer_assoc_complete_cmd cmd; 6287 6288 /* HT Operation Element of the peer. Five bytes packed in 2 6289 * INT32 array and filled from lsb to msb. 6290 */ 6291 __le32 peer_ht_info[2]; 6292 } __packed; 6293 6294 struct wmi_10_1_peer_assoc_complete_cmd { 6295 struct wmi_common_peer_assoc_complete_cmd cmd; 6296 } __packed; 6297 6298 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0 6299 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f 6300 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4 6301 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0 6302 6303 struct wmi_10_2_peer_assoc_complete_cmd { 6304 struct wmi_common_peer_assoc_complete_cmd cmd; 6305 __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */ 6306 } __packed; 6307 6308 #define PEER_BW_RXNSS_OVERRIDE_OFFSET 31 6309 6310 struct wmi_10_4_peer_assoc_complete_cmd { 6311 struct wmi_10_2_peer_assoc_complete_cmd cmd; 6312 __le32 peer_bw_rxnss_override; 6313 } __packed; 6314 6315 struct wmi_peer_assoc_complete_arg { 6316 u8 addr[ETH_ALEN]; 6317 u32 vdev_id; 6318 bool peer_reassoc; 6319 u16 peer_aid; 6320 u32 peer_flags; /* see %WMI_PEER_ */ 6321 u16 peer_caps; 6322 u32 peer_listen_intval; 6323 u32 peer_ht_caps; 6324 u32 peer_max_mpdu; 6325 u32 peer_mpdu_density; /* 0..16 */ 6326 u32 peer_rate_caps; /* see %WMI_RC_ */ 6327 struct wmi_rate_set_arg peer_legacy_rates; 6328 struct wmi_rate_set_arg peer_ht_rates; 6329 u32 peer_num_spatial_streams; 6330 u32 peer_vht_caps; 6331 enum wmi_phy_mode peer_phymode; 6332 struct wmi_vht_rate_set_arg peer_vht_rates; 6333 u32 peer_bw_rxnss_override; 6334 }; 6335 6336 struct wmi_peer_add_wds_entry_cmd { 6337 /* peer MAC address */ 6338 struct wmi_mac_addr peer_macaddr; 6339 /* wds MAC addr */ 6340 struct wmi_mac_addr wds_macaddr; 6341 } __packed; 6342 6343 struct wmi_peer_remove_wds_entry_cmd { 6344 /* wds MAC addr */ 6345 struct wmi_mac_addr wds_macaddr; 6346 } __packed; 6347 6348 struct wmi_peer_q_empty_callback_event { 6349 /* peer MAC address */ 6350 struct wmi_mac_addr peer_macaddr; 6351 } __packed; 6352 6353 /* 6354 * Channel info WMI event 6355 */ 6356 struct wmi_chan_info_event { 6357 __le32 err_code; 6358 __le32 freq; 6359 __le32 cmd_flags; 6360 __le32 noise_floor; 6361 __le32 rx_clear_count; 6362 __le32 cycle_count; 6363 } __packed; 6364 6365 struct wmi_10_4_chan_info_event { 6366 __le32 err_code; 6367 __le32 freq; 6368 __le32 cmd_flags; 6369 __le32 noise_floor; 6370 __le32 rx_clear_count; 6371 __le32 cycle_count; 6372 __le32 chan_tx_pwr_range; 6373 __le32 chan_tx_pwr_tp; 6374 __le32 rx_frame_count; 6375 } __packed; 6376 6377 struct wmi_peer_sta_kickout_event { 6378 struct wmi_mac_addr peer_macaddr; 6379 } __packed; 6380 6381 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0) 6382 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1) 6383 6384 /* Beacon filter wmi command info */ 6385 #define BCN_FLT_MAX_SUPPORTED_IES 256 6386 #define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32) 6387 6388 struct bss_bcn_stats { 6389 __le32 vdev_id; 6390 __le32 bss_bcnsdropped; 6391 __le32 bss_bcnsdelivered; 6392 } __packed; 6393 6394 struct bcn_filter_stats { 6395 __le32 bcns_dropped; 6396 __le32 bcns_delivered; 6397 __le32 activefilters; 6398 struct bss_bcn_stats bss_stats; 6399 } __packed; 6400 6401 struct wmi_add_bcn_filter_cmd { 6402 u32 vdev_id; 6403 u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST]; 6404 } __packed; 6405 6406 enum wmi_sta_keepalive_method { 6407 WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1, 6408 WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2, 6409 }; 6410 6411 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0 6412 6413 /* Firmware crashes if keepalive interval exceeds this limit */ 6414 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff 6415 6416 /* note: ip4 addresses are in network byte order, i.e. big endian */ 6417 struct wmi_sta_keepalive_arp_resp { 6418 __be32 src_ip4_addr; 6419 __be32 dest_ip4_addr; 6420 struct wmi_mac_addr dest_mac_addr; 6421 } __packed; 6422 6423 struct wmi_sta_keepalive_cmd { 6424 __le32 vdev_id; 6425 __le32 enabled; 6426 __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */ 6427 __le32 interval; /* in seconds */ 6428 struct wmi_sta_keepalive_arp_resp arp_resp; 6429 } __packed; 6430 6431 struct wmi_sta_keepalive_arg { 6432 u32 vdev_id; 6433 u32 enabled; 6434 u32 method; 6435 u32 interval; 6436 __be32 src_ip4_addr; 6437 __be32 dest_ip4_addr; 6438 const u8 dest_mac_addr[ETH_ALEN]; 6439 }; 6440 6441 enum wmi_force_fw_hang_type { 6442 WMI_FORCE_FW_HANG_ASSERT = 1, 6443 WMI_FORCE_FW_HANG_NO_DETECT, 6444 WMI_FORCE_FW_HANG_CTRL_EP_FULL, 6445 WMI_FORCE_FW_HANG_EMPTY_POINT, 6446 WMI_FORCE_FW_HANG_STACK_OVERFLOW, 6447 WMI_FORCE_FW_HANG_INFINITE_LOOP, 6448 }; 6449 6450 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF 6451 6452 struct wmi_force_fw_hang_cmd { 6453 __le32 type; 6454 __le32 delay_ms; 6455 } __packed; 6456 6457 enum ath10k_dbglog_level { 6458 ATH10K_DBGLOG_LEVEL_VERBOSE = 0, 6459 ATH10K_DBGLOG_LEVEL_INFO = 1, 6460 ATH10K_DBGLOG_LEVEL_WARN = 2, 6461 ATH10K_DBGLOG_LEVEL_ERR = 3, 6462 }; 6463 6464 /* VAP ids to enable dbglog */ 6465 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0 6466 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff 6467 6468 /* to enable dbglog in the firmware */ 6469 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16 6470 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000 6471 6472 /* timestamp resolution */ 6473 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17 6474 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000 6475 6476 /* number of queued messages before sending them to the host */ 6477 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20 6478 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000 6479 6480 /* 6481 * Log levels to enable. This defines the minimum level to enable, this is 6482 * not a bitmask. See enum ath10k_dbglog_level for the values. 6483 */ 6484 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28 6485 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000 6486 6487 /* 6488 * Note: this is a cleaned up version of a struct firmware uses. For 6489 * example, config_valid was hidden inside an array. 6490 */ 6491 struct wmi_dbglog_cfg_cmd { 6492 /* bitmask to hold mod id config*/ 6493 __le32 module_enable; 6494 6495 /* see ATH10K_DBGLOG_CFG_ */ 6496 __le32 config_enable; 6497 6498 /* mask of module id bits to be changed */ 6499 __le32 module_valid; 6500 6501 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6502 __le32 config_valid; 6503 } __packed; 6504 6505 struct wmi_10_4_dbglog_cfg_cmd { 6506 /* bitmask to hold mod id config*/ 6507 __le64 module_enable; 6508 6509 /* see ATH10K_DBGLOG_CFG_ */ 6510 __le32 config_enable; 6511 6512 /* mask of module id bits to be changed */ 6513 __le64 module_valid; 6514 6515 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6516 __le32 config_valid; 6517 } __packed; 6518 6519 enum wmi_roam_reason { 6520 WMI_ROAM_REASON_BETTER_AP = 1, 6521 WMI_ROAM_REASON_BEACON_MISS = 2, 6522 WMI_ROAM_REASON_LOW_RSSI = 3, 6523 WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4, 6524 WMI_ROAM_REASON_HO_FAILED = 5, 6525 6526 /* keep last */ 6527 WMI_ROAM_REASON_MAX, 6528 }; 6529 6530 struct wmi_roam_ev { 6531 __le32 vdev_id; 6532 __le32 reason; 6533 } __packed; 6534 6535 #define ATH10K_FRAGMT_THRESHOLD_MIN 540 6536 #define ATH10K_FRAGMT_THRESHOLD_MAX 2346 6537 6538 #define WMI_MAX_EVENT 0x1000 6539 /* Maximum number of pending TXed WMI packets */ 6540 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr) 6541 6542 /* By default disable power save for IBSS */ 6543 #define ATH10K_DEFAULT_ATIM 0 6544 6545 #define WMI_MAX_MEM_REQS 16 6546 6547 struct wmi_scan_ev_arg { 6548 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 6549 __le32 reason; /* %WMI_SCAN_REASON_ */ 6550 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 6551 __le32 scan_req_id; 6552 __le32 scan_id; 6553 __le32 vdev_id; 6554 }; 6555 6556 struct wmi_mgmt_rx_ev_arg { 6557 __le32 channel; 6558 __le32 snr; 6559 __le32 rate; 6560 __le32 phy_mode; 6561 __le32 buf_len; 6562 __le32 status; /* %WMI_RX_STATUS_ */ 6563 struct wmi_mgmt_rx_ext_info ext_info; 6564 }; 6565 6566 struct wmi_ch_info_ev_arg { 6567 __le32 err_code; 6568 __le32 freq; 6569 __le32 cmd_flags; 6570 __le32 noise_floor; 6571 __le32 rx_clear_count; 6572 __le32 cycle_count; 6573 __le32 chan_tx_pwr_range; 6574 __le32 chan_tx_pwr_tp; 6575 __le32 rx_frame_count; 6576 }; 6577 6578 struct wmi_vdev_start_ev_arg { 6579 __le32 vdev_id; 6580 __le32 req_id; 6581 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 6582 __le32 status; 6583 }; 6584 6585 struct wmi_peer_kick_ev_arg { 6586 const u8 *mac_addr; 6587 }; 6588 6589 struct wmi_swba_ev_arg { 6590 __le32 vdev_map; 6591 struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV]; 6592 const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV]; 6593 }; 6594 6595 struct wmi_phyerr_ev_arg { 6596 u32 tsf_timestamp; 6597 u16 freq1; 6598 u16 freq2; 6599 u8 rssi_combined; 6600 u8 chan_width_mhz; 6601 u8 phy_err_code; 6602 u16 nf_chains[4]; 6603 u32 buf_len; 6604 const u8 *buf; 6605 u8 hdr_len; 6606 }; 6607 6608 struct wmi_phyerr_hdr_arg { 6609 u32 num_phyerrs; 6610 u32 tsf_l32; 6611 u32 tsf_u32; 6612 u32 buf_len; 6613 const void *phyerrs; 6614 }; 6615 6616 struct wmi_svc_rdy_ev_arg { 6617 __le32 min_tx_power; 6618 __le32 max_tx_power; 6619 __le32 ht_cap; 6620 __le32 vht_cap; 6621 __le32 sw_ver0; 6622 __le32 sw_ver1; 6623 __le32 fw_build; 6624 __le32 phy_capab; 6625 __le32 num_rf_chains; 6626 __le32 eeprom_rd; 6627 __le32 num_mem_reqs; 6628 __le32 low_5ghz_chan; 6629 __le32 high_5ghz_chan; 6630 const __le32 *service_map; 6631 size_t service_map_len; 6632 const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS]; 6633 }; 6634 6635 struct wmi_rdy_ev_arg { 6636 __le32 sw_version; 6637 __le32 abi_version; 6638 __le32 status; 6639 const u8 *mac_addr; 6640 }; 6641 6642 struct wmi_roam_ev_arg { 6643 __le32 vdev_id; 6644 __le32 reason; 6645 __le32 rssi; 6646 }; 6647 6648 struct wmi_echo_ev_arg { 6649 __le32 value; 6650 }; 6651 6652 struct wmi_pdev_temperature_event { 6653 /* temperature value in Celcius degree */ 6654 __le32 temperature; 6655 } __packed; 6656 6657 struct wmi_pdev_bss_chan_info_event { 6658 __le32 freq; 6659 __le32 noise_floor; 6660 __le64 cycle_busy; 6661 __le64 cycle_total; 6662 __le64 cycle_tx; 6663 __le64 cycle_rx; 6664 __le64 cycle_rx_bss; 6665 __le32 reserved; 6666 } __packed; 6667 6668 /* WOW structures */ 6669 enum wmi_wow_wakeup_event { 6670 WOW_BMISS_EVENT = 0, 6671 WOW_BETTER_AP_EVENT, 6672 WOW_DEAUTH_RECVD_EVENT, 6673 WOW_MAGIC_PKT_RECVD_EVENT, 6674 WOW_GTK_ERR_EVENT, 6675 WOW_FOURWAY_HSHAKE_EVENT, 6676 WOW_EAPOL_RECVD_EVENT, 6677 WOW_NLO_DETECTED_EVENT, 6678 WOW_DISASSOC_RECVD_EVENT, 6679 WOW_PATTERN_MATCH_EVENT, 6680 WOW_CSA_IE_EVENT, 6681 WOW_PROBE_REQ_WPS_IE_EVENT, 6682 WOW_AUTH_REQ_EVENT, 6683 WOW_ASSOC_REQ_EVENT, 6684 WOW_HTT_EVENT, 6685 WOW_RA_MATCH_EVENT, 6686 WOW_HOST_AUTO_SHUTDOWN_EVENT, 6687 WOW_IOAC_MAGIC_EVENT, 6688 WOW_IOAC_SHORT_EVENT, 6689 WOW_IOAC_EXTEND_EVENT, 6690 WOW_IOAC_TIMER_EVENT, 6691 WOW_DFS_PHYERR_RADAR_EVENT, 6692 WOW_BEACON_EVENT, 6693 WOW_CLIENT_KICKOUT_EVENT, 6694 WOW_EVENT_MAX, 6695 }; 6696 6697 #define C2S(x) case x: return #x 6698 6699 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev) 6700 { 6701 switch (ev) { 6702 C2S(WOW_BMISS_EVENT); 6703 C2S(WOW_BETTER_AP_EVENT); 6704 C2S(WOW_DEAUTH_RECVD_EVENT); 6705 C2S(WOW_MAGIC_PKT_RECVD_EVENT); 6706 C2S(WOW_GTK_ERR_EVENT); 6707 C2S(WOW_FOURWAY_HSHAKE_EVENT); 6708 C2S(WOW_EAPOL_RECVD_EVENT); 6709 C2S(WOW_NLO_DETECTED_EVENT); 6710 C2S(WOW_DISASSOC_RECVD_EVENT); 6711 C2S(WOW_PATTERN_MATCH_EVENT); 6712 C2S(WOW_CSA_IE_EVENT); 6713 C2S(WOW_PROBE_REQ_WPS_IE_EVENT); 6714 C2S(WOW_AUTH_REQ_EVENT); 6715 C2S(WOW_ASSOC_REQ_EVENT); 6716 C2S(WOW_HTT_EVENT); 6717 C2S(WOW_RA_MATCH_EVENT); 6718 C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT); 6719 C2S(WOW_IOAC_MAGIC_EVENT); 6720 C2S(WOW_IOAC_SHORT_EVENT); 6721 C2S(WOW_IOAC_EXTEND_EVENT); 6722 C2S(WOW_IOAC_TIMER_EVENT); 6723 C2S(WOW_DFS_PHYERR_RADAR_EVENT); 6724 C2S(WOW_BEACON_EVENT); 6725 C2S(WOW_CLIENT_KICKOUT_EVENT); 6726 C2S(WOW_EVENT_MAX); 6727 default: 6728 return NULL; 6729 } 6730 } 6731 6732 enum wmi_wow_wake_reason { 6733 WOW_REASON_UNSPECIFIED = -1, 6734 WOW_REASON_NLOD = 0, 6735 WOW_REASON_AP_ASSOC_LOST, 6736 WOW_REASON_LOW_RSSI, 6737 WOW_REASON_DEAUTH_RECVD, 6738 WOW_REASON_DISASSOC_RECVD, 6739 WOW_REASON_GTK_HS_ERR, 6740 WOW_REASON_EAP_REQ, 6741 WOW_REASON_FOURWAY_HS_RECV, 6742 WOW_REASON_TIMER_INTR_RECV, 6743 WOW_REASON_PATTERN_MATCH_FOUND, 6744 WOW_REASON_RECV_MAGIC_PATTERN, 6745 WOW_REASON_P2P_DISC, 6746 WOW_REASON_WLAN_HB, 6747 WOW_REASON_CSA_EVENT, 6748 WOW_REASON_PROBE_REQ_WPS_IE_RECV, 6749 WOW_REASON_AUTH_REQ_RECV, 6750 WOW_REASON_ASSOC_REQ_RECV, 6751 WOW_REASON_HTT_EVENT, 6752 WOW_REASON_RA_MATCH, 6753 WOW_REASON_HOST_AUTO_SHUTDOWN, 6754 WOW_REASON_IOAC_MAGIC_EVENT, 6755 WOW_REASON_IOAC_SHORT_EVENT, 6756 WOW_REASON_IOAC_EXTEND_EVENT, 6757 WOW_REASON_IOAC_TIMER_EVENT, 6758 WOW_REASON_ROAM_HO, 6759 WOW_REASON_DFS_PHYERR_RADADR_EVENT, 6760 WOW_REASON_BEACON_RECV, 6761 WOW_REASON_CLIENT_KICKOUT_EVENT, 6762 WOW_REASON_DEBUG_TEST = 0xFF, 6763 }; 6764 6765 static inline const char *wow_reason(enum wmi_wow_wake_reason reason) 6766 { 6767 switch (reason) { 6768 C2S(WOW_REASON_UNSPECIFIED); 6769 C2S(WOW_REASON_NLOD); 6770 C2S(WOW_REASON_AP_ASSOC_LOST); 6771 C2S(WOW_REASON_LOW_RSSI); 6772 C2S(WOW_REASON_DEAUTH_RECVD); 6773 C2S(WOW_REASON_DISASSOC_RECVD); 6774 C2S(WOW_REASON_GTK_HS_ERR); 6775 C2S(WOW_REASON_EAP_REQ); 6776 C2S(WOW_REASON_FOURWAY_HS_RECV); 6777 C2S(WOW_REASON_TIMER_INTR_RECV); 6778 C2S(WOW_REASON_PATTERN_MATCH_FOUND); 6779 C2S(WOW_REASON_RECV_MAGIC_PATTERN); 6780 C2S(WOW_REASON_P2P_DISC); 6781 C2S(WOW_REASON_WLAN_HB); 6782 C2S(WOW_REASON_CSA_EVENT); 6783 C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV); 6784 C2S(WOW_REASON_AUTH_REQ_RECV); 6785 C2S(WOW_REASON_ASSOC_REQ_RECV); 6786 C2S(WOW_REASON_HTT_EVENT); 6787 C2S(WOW_REASON_RA_MATCH); 6788 C2S(WOW_REASON_HOST_AUTO_SHUTDOWN); 6789 C2S(WOW_REASON_IOAC_MAGIC_EVENT); 6790 C2S(WOW_REASON_IOAC_SHORT_EVENT); 6791 C2S(WOW_REASON_IOAC_EXTEND_EVENT); 6792 C2S(WOW_REASON_IOAC_TIMER_EVENT); 6793 C2S(WOW_REASON_ROAM_HO); 6794 C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT); 6795 C2S(WOW_REASON_BEACON_RECV); 6796 C2S(WOW_REASON_CLIENT_KICKOUT_EVENT); 6797 C2S(WOW_REASON_DEBUG_TEST); 6798 default: 6799 return NULL; 6800 } 6801 } 6802 6803 #undef C2S 6804 6805 struct wmi_wow_ev_arg { 6806 u32 vdev_id; 6807 u32 flag; 6808 enum wmi_wow_wake_reason wake_reason; 6809 u32 data_len; 6810 }; 6811 6812 #define WOW_MIN_PATTERN_SIZE 1 6813 #define WOW_MAX_PATTERN_SIZE 148 6814 #define WOW_MAX_PKT_OFFSET 128 6815 6816 enum wmi_tdls_state { 6817 WMI_TDLS_DISABLE, 6818 WMI_TDLS_ENABLE_PASSIVE, 6819 WMI_TDLS_ENABLE_ACTIVE, 6820 WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL, 6821 }; 6822 6823 enum wmi_tdls_peer_state { 6824 WMI_TDLS_PEER_STATE_PEERING, 6825 WMI_TDLS_PEER_STATE_CONNECTED, 6826 WMI_TDLS_PEER_STATE_TEARDOWN, 6827 }; 6828 6829 struct wmi_tdls_peer_update_cmd_arg { 6830 u32 vdev_id; 6831 enum wmi_tdls_peer_state peer_state; 6832 u8 addr[ETH_ALEN]; 6833 }; 6834 6835 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32 6836 6837 #define WMI_TDLS_PEER_SP_MASK 0x60 6838 #define WMI_TDLS_PEER_SP_LSB 5 6839 6840 enum wmi_tdls_options { 6841 WMI_TDLS_OFFCHAN_EN = BIT(0), 6842 WMI_TDLS_BUFFER_STA_EN = BIT(1), 6843 WMI_TDLS_SLEEP_STA_EN = BIT(2), 6844 }; 6845 6846 enum { 6847 WMI_TDLS_PEER_QOS_AC_VO = BIT(0), 6848 WMI_TDLS_PEER_QOS_AC_VI = BIT(1), 6849 WMI_TDLS_PEER_QOS_AC_BK = BIT(2), 6850 WMI_TDLS_PEER_QOS_AC_BE = BIT(3), 6851 }; 6852 6853 struct wmi_tdls_peer_capab_arg { 6854 u8 peer_uapsd_queues; 6855 u8 peer_max_sp; 6856 u32 buff_sta_support; 6857 u32 off_chan_support; 6858 u32 peer_curr_operclass; 6859 u32 self_curr_operclass; 6860 u32 peer_chan_len; 6861 u32 peer_operclass_len; 6862 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 6863 u32 is_peer_responder; 6864 u32 pref_offchan_num; 6865 u32 pref_offchan_bw; 6866 }; 6867 6868 struct wmi_10_4_tdls_set_state_cmd { 6869 __le32 vdev_id; 6870 __le32 state; 6871 __le32 notification_interval_ms; 6872 __le32 tx_discovery_threshold; 6873 __le32 tx_teardown_threshold; 6874 __le32 rssi_teardown_threshold; 6875 __le32 rssi_delta; 6876 __le32 tdls_options; 6877 __le32 tdls_peer_traffic_ind_window; 6878 __le32 tdls_peer_traffic_response_timeout_ms; 6879 __le32 tdls_puapsd_mask; 6880 __le32 tdls_puapsd_inactivity_time_ms; 6881 __le32 tdls_puapsd_rx_frame_threshold; 6882 __le32 teardown_notification_ms; 6883 __le32 tdls_peer_kickout_threshold; 6884 } __packed; 6885 6886 struct wmi_tdls_peer_capabilities { 6887 __le32 peer_qos; 6888 __le32 buff_sta_support; 6889 __le32 off_chan_support; 6890 __le32 peer_curr_operclass; 6891 __le32 self_curr_operclass; 6892 __le32 peer_chan_len; 6893 __le32 peer_operclass_len; 6894 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 6895 __le32 is_peer_responder; 6896 __le32 pref_offchan_num; 6897 __le32 pref_offchan_bw; 6898 struct wmi_channel peer_chan_list[1]; 6899 } __packed; 6900 6901 struct wmi_10_4_tdls_peer_update_cmd { 6902 __le32 vdev_id; 6903 struct wmi_mac_addr peer_macaddr; 6904 __le32 peer_state; 6905 __le32 reserved[4]; 6906 struct wmi_tdls_peer_capabilities peer_capab; 6907 } __packed; 6908 6909 enum wmi_tdls_peer_reason { 6910 WMI_TDLS_TEARDOWN_REASON_TX, 6911 WMI_TDLS_TEARDOWN_REASON_RSSI, 6912 WMI_TDLS_TEARDOWN_REASON_SCAN, 6913 WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE, 6914 WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT, 6915 WMI_TDLS_TEARDOWN_REASON_BAD_PTR, 6916 WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE, 6917 WMI_TDLS_ENTER_BUF_STA, 6918 WMI_TDLS_EXIT_BUF_STA, 6919 WMI_TDLS_ENTER_BT_BUSY_MODE, 6920 WMI_TDLS_EXIT_BT_BUSY_MODE, 6921 WMI_TDLS_SCAN_STARTED_EVENT, 6922 WMI_TDLS_SCAN_COMPLETED_EVENT, 6923 }; 6924 6925 enum wmi_tdls_peer_notification { 6926 WMI_TDLS_SHOULD_DISCOVER, 6927 WMI_TDLS_SHOULD_TEARDOWN, 6928 WMI_TDLS_PEER_DISCONNECTED, 6929 WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION, 6930 }; 6931 6932 struct wmi_tdls_peer_event { 6933 struct wmi_mac_addr peer_macaddr; 6934 /* see enum wmi_tdls_peer_notification*/ 6935 __le32 peer_status; 6936 /* see enum wmi_tdls_peer_reason */ 6937 __le32 peer_reason; 6938 __le32 vdev_id; 6939 } __packed; 6940 6941 enum wmi_txbf_conf { 6942 WMI_TXBF_CONF_UNSUPPORTED, 6943 WMI_TXBF_CONF_BEFORE_ASSOC, 6944 WMI_TXBF_CONF_AFTER_ASSOC, 6945 }; 6946 6947 #define WMI_CCA_DETECT_LEVEL_AUTO 0 6948 #define WMI_CCA_DETECT_MARGIN_AUTO 0 6949 6950 struct wmi_pdev_set_adaptive_cca_params { 6951 __le32 enable; 6952 __le32 cca_detect_level; 6953 __le32 cca_detect_margin; 6954 } __packed; 6955 6956 enum wmi_host_platform_type { 6957 WMI_HOST_PLATFORM_HIGH_PERF, 6958 WMI_HOST_PLATFORM_LOW_PERF, 6959 }; 6960 6961 enum wmi_bss_survey_req_type { 6962 WMI_BSS_SURVEY_REQ_TYPE_READ = 1, 6963 WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR, 6964 }; 6965 6966 struct wmi_pdev_chan_info_req_cmd { 6967 __le32 type; 6968 __le32 reserved; 6969 } __packed; 6970 6971 struct ath10k; 6972 struct ath10k_vif; 6973 struct ath10k_fw_stats_pdev; 6974 struct ath10k_fw_stats_peer; 6975 struct ath10k_fw_stats; 6976 6977 int ath10k_wmi_attach(struct ath10k *ar); 6978 void ath10k_wmi_detach(struct ath10k *ar); 6979 void ath10k_wmi_free_host_mem(struct ath10k *ar); 6980 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar); 6981 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar); 6982 6983 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 6984 int ath10k_wmi_connect(struct ath10k *ar); 6985 6986 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 6987 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); 6988 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb, 6989 u32 cmd_id); 6990 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg); 6991 6992 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src, 6993 struct ath10k_fw_stats_pdev *dst); 6994 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src, 6995 struct ath10k_fw_stats_pdev *dst); 6996 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src, 6997 struct ath10k_fw_stats_pdev *dst); 6998 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src, 6999 struct ath10k_fw_stats_pdev *dst); 7000 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src, 7001 struct ath10k_fw_stats_peer *dst); 7002 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar, 7003 struct wmi_host_mem_chunks *chunks); 7004 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn, 7005 const struct wmi_start_scan_arg *arg); 7006 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params, 7007 const struct wmi_wmm_params_arg *arg); 7008 void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch, 7009 const struct wmi_channel_arg *arg); 7010 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg); 7011 7012 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb); 7013 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb); 7014 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb); 7015 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb); 7016 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb); 7017 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb); 7018 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb); 7019 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb); 7020 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb); 7021 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb); 7022 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb); 7023 void ath10k_wmi_event_dfs(struct ath10k *ar, 7024 struct wmi_phyerr_ev_arg *phyerr, u64 tsf); 7025 void ath10k_wmi_event_spectral_scan(struct ath10k *ar, 7026 struct wmi_phyerr_ev_arg *phyerr, 7027 u64 tsf); 7028 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb); 7029 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb); 7030 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb); 7031 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb); 7032 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb); 7033 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb); 7034 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar, 7035 struct sk_buff *skb); 7036 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar, 7037 struct sk_buff *skb); 7038 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb); 7039 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb); 7040 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb); 7041 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb); 7042 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb); 7043 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar, 7044 struct sk_buff *skb); 7045 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb); 7046 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb); 7047 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb); 7048 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar, 7049 struct sk_buff *skb); 7050 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb); 7051 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb); 7052 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb); 7053 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb); 7054 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb); 7055 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf, 7056 int left_len, struct wmi_phyerr_ev_arg *arg); 7057 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar, 7058 struct ath10k_fw_stats *fw_stats, 7059 char *buf); 7060 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar, 7061 struct ath10k_fw_stats *fw_stats, 7062 char *buf); 7063 size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head); 7064 size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head); 7065 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar, 7066 struct ath10k_fw_stats *fw_stats, 7067 char *buf); 7068 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar, 7069 enum wmi_vdev_subtype subtype); 7070 int ath10k_wmi_barrier(struct ath10k *ar); 7071 void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table, 7072 u32 num_tx_chain); 7073 void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb); 7074 7075 #endif /* _WMI_H_ */ 7076