1 /* 2 * Copyright (c) 2005-2011 Atheros Communications Inc. 3 * Copyright (c) 2011-2013 Qualcomm Atheros, Inc. 4 * 5 * Permission to use, copy, modify, and/or distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 */ 17 18 #ifndef _WMI_H_ 19 #define _WMI_H_ 20 21 #include <linux/types.h> 22 #include <net/mac80211.h> 23 24 /* 25 * This file specifies the WMI interface for the Unified Software 26 * Architecture. 27 * 28 * It includes definitions of all the commands and events. Commands are 29 * messages from the host to the target. Events and Replies are messages 30 * from the target to the host. 31 * 32 * Ownership of correctness in regards to WMI commands belongs to the host 33 * driver and the target is not required to validate parameters for value, 34 * proper range, or any other checking. 35 * 36 * Guidelines for extending this interface are below. 37 * 38 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff 39 * 40 * 2. Use ONLY u32 type for defining member variables within WMI 41 * command/event structures. Do not use u8, u16, bool or 42 * enum types within these structures. 43 * 44 * 3. DO NOT define bit fields within structures. Implement bit fields 45 * using masks if necessary. Do not use the programming language's bit 46 * field definition. 47 * 48 * 4. Define macros for encode/decode of u8, u16 fields within 49 * the u32 variables. Use these macros for set/get of these fields. 50 * Try to use this to optimize the structure without bloating it with 51 * u32 variables for every lower sized field. 52 * 53 * 5. Do not use PACK/UNPACK attributes for the structures as each member 54 * variable is already 4-byte aligned by virtue of being a u32 55 * type. 56 * 57 * 6. Comment each parameter part of the WMI command/event structure by 58 * using the 2 stars at the begining of C comment instead of one star to 59 * enable HTML document generation using Doxygen. 60 * 61 */ 62 63 /* Control Path */ 64 struct wmi_cmd_hdr { 65 __le32 cmd_id; 66 } __packed; 67 68 #define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF 69 #define WMI_CMD_HDR_CMD_ID_LSB 0 70 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000 71 #define WMI_CMD_HDR_PLT_PRIV_LSB 24 72 73 #define HTC_PROTOCOL_VERSION 0x0002 74 #define WMI_PROTOCOL_VERSION 0x0002 75 76 /* 77 * There is no signed version of __le32, so for a temporary solution come 78 * up with our own version. The idea is from fs/ntfs/types.h. 79 * 80 * Use a_ prefix so that it doesn't conflict if we get proper support to 81 * linux/types.h. 82 */ 83 typedef __s32 __bitwise a_sle32; 84 85 static inline a_sle32 a_cpu_to_sle32(s32 val) 86 { 87 return (__force a_sle32)cpu_to_le32(val); 88 } 89 90 static inline s32 a_sle32_to_cpu(a_sle32 val) 91 { 92 return le32_to_cpu((__force __le32)val); 93 } 94 95 enum wmi_service { 96 WMI_SERVICE_BEACON_OFFLOAD = 0, 97 WMI_SERVICE_SCAN_OFFLOAD, 98 WMI_SERVICE_ROAM_OFFLOAD, 99 WMI_SERVICE_BCN_MISS_OFFLOAD, 100 WMI_SERVICE_STA_PWRSAVE, 101 WMI_SERVICE_STA_ADVANCED_PWRSAVE, 102 WMI_SERVICE_AP_UAPSD, 103 WMI_SERVICE_AP_DFS, 104 WMI_SERVICE_11AC, 105 WMI_SERVICE_BLOCKACK, 106 WMI_SERVICE_PHYERR, 107 WMI_SERVICE_BCN_FILTER, 108 WMI_SERVICE_RTT, 109 WMI_SERVICE_RATECTRL, 110 WMI_SERVICE_WOW, 111 WMI_SERVICE_RATECTRL_CACHE, 112 WMI_SERVICE_IRAM_TIDS, 113 WMI_SERVICE_ARPNS_OFFLOAD, 114 WMI_SERVICE_NLO, 115 WMI_SERVICE_GTK_OFFLOAD, 116 WMI_SERVICE_SCAN_SCH, 117 WMI_SERVICE_CSA_OFFLOAD, 118 WMI_SERVICE_CHATTER, 119 WMI_SERVICE_COEX_FREQAVOID, 120 WMI_SERVICE_PACKET_POWER_SAVE, 121 WMI_SERVICE_FORCE_FW_HANG, 122 WMI_SERVICE_GPIO, 123 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 124 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 125 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 126 WMI_SERVICE_STA_KEEP_ALIVE, 127 WMI_SERVICE_TX_ENCAP, 128 WMI_SERVICE_BURST, 129 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, 130 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, 131 WMI_SERVICE_ROAM_SCAN_OFFLOAD, 132 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 133 WMI_SERVICE_EARLY_RX, 134 WMI_SERVICE_STA_SMPS, 135 WMI_SERVICE_FWTEST, 136 WMI_SERVICE_STA_WMMAC, 137 WMI_SERVICE_TDLS, 138 WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE, 139 WMI_SERVICE_ADAPTIVE_OCS, 140 WMI_SERVICE_BA_SSN_SUPPORT, 141 WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE, 142 WMI_SERVICE_WLAN_HB, 143 WMI_SERVICE_LTE_ANT_SHARE_SUPPORT, 144 WMI_SERVICE_BATCH_SCAN, 145 WMI_SERVICE_QPOWER, 146 WMI_SERVICE_PLMREQ, 147 WMI_SERVICE_THERMAL_MGMT, 148 WMI_SERVICE_RMC, 149 WMI_SERVICE_MHF_OFFLOAD, 150 WMI_SERVICE_COEX_SAR, 151 WMI_SERVICE_BCN_TXRATE_OVERRIDE, 152 WMI_SERVICE_NAN, 153 WMI_SERVICE_L1SS_STAT, 154 WMI_SERVICE_ESTIMATE_LINKSPEED, 155 WMI_SERVICE_OBSS_SCAN, 156 WMI_SERVICE_TDLS_OFFCHAN, 157 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, 158 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, 159 WMI_SERVICE_IBSS_PWRSAVE, 160 WMI_SERVICE_LPASS, 161 WMI_SERVICE_EXTSCAN, 162 WMI_SERVICE_D0WOW, 163 WMI_SERVICE_HSOFFLOAD, 164 WMI_SERVICE_ROAM_HO_OFFLOAD, 165 WMI_SERVICE_RX_FULL_REORDER, 166 WMI_SERVICE_DHCP_OFFLOAD, 167 WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT, 168 WMI_SERVICE_MDNS_OFFLOAD, 169 WMI_SERVICE_SAP_AUTH_OFFLOAD, 170 WMI_SERVICE_ATF, 171 WMI_SERVICE_COEX_GPIO, 172 WMI_SERVICE_ENHANCED_PROXY_STA, 173 WMI_SERVICE_TT, 174 WMI_SERVICE_PEER_CACHING, 175 WMI_SERVICE_AUX_SPECTRAL_INTF, 176 WMI_SERVICE_AUX_CHAN_LOAD_INTF, 177 WMI_SERVICE_BSS_CHANNEL_INFO_64, 178 WMI_SERVICE_EXT_RES_CFG_SUPPORT, 179 WMI_SERVICE_MESH_11S, 180 WMI_SERVICE_MESH_NON_11S, 181 WMI_SERVICE_PEER_STATS, 182 WMI_SERVICE_RESTRT_CHNL_SUPPORT, 183 WMI_SERVICE_TX_MODE_PUSH_ONLY, 184 WMI_SERVICE_TX_MODE_PUSH_PULL, 185 WMI_SERVICE_TX_MODE_DYNAMIC, 186 187 /* keep last */ 188 WMI_SERVICE_MAX, 189 }; 190 191 enum wmi_10x_service { 192 WMI_10X_SERVICE_BEACON_OFFLOAD = 0, 193 WMI_10X_SERVICE_SCAN_OFFLOAD, 194 WMI_10X_SERVICE_ROAM_OFFLOAD, 195 WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 196 WMI_10X_SERVICE_STA_PWRSAVE, 197 WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 198 WMI_10X_SERVICE_AP_UAPSD, 199 WMI_10X_SERVICE_AP_DFS, 200 WMI_10X_SERVICE_11AC, 201 WMI_10X_SERVICE_BLOCKACK, 202 WMI_10X_SERVICE_PHYERR, 203 WMI_10X_SERVICE_BCN_FILTER, 204 WMI_10X_SERVICE_RTT, 205 WMI_10X_SERVICE_RATECTRL, 206 WMI_10X_SERVICE_WOW, 207 WMI_10X_SERVICE_RATECTRL_CACHE, 208 WMI_10X_SERVICE_IRAM_TIDS, 209 WMI_10X_SERVICE_BURST, 210 211 /* introduced in 10.2 */ 212 WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 213 WMI_10X_SERVICE_FORCE_FW_HANG, 214 WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 215 WMI_10X_SERVICE_ATF, 216 WMI_10X_SERVICE_COEX_GPIO, 217 WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 218 WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 219 WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 220 WMI_10X_SERVICE_MESH, 221 WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 222 WMI_10X_SERVICE_PEER_STATS, 223 }; 224 225 enum wmi_main_service { 226 WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0, 227 WMI_MAIN_SERVICE_SCAN_OFFLOAD, 228 WMI_MAIN_SERVICE_ROAM_OFFLOAD, 229 WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 230 WMI_MAIN_SERVICE_STA_PWRSAVE, 231 WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 232 WMI_MAIN_SERVICE_AP_UAPSD, 233 WMI_MAIN_SERVICE_AP_DFS, 234 WMI_MAIN_SERVICE_11AC, 235 WMI_MAIN_SERVICE_BLOCKACK, 236 WMI_MAIN_SERVICE_PHYERR, 237 WMI_MAIN_SERVICE_BCN_FILTER, 238 WMI_MAIN_SERVICE_RTT, 239 WMI_MAIN_SERVICE_RATECTRL, 240 WMI_MAIN_SERVICE_WOW, 241 WMI_MAIN_SERVICE_RATECTRL_CACHE, 242 WMI_MAIN_SERVICE_IRAM_TIDS, 243 WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 244 WMI_MAIN_SERVICE_NLO, 245 WMI_MAIN_SERVICE_GTK_OFFLOAD, 246 WMI_MAIN_SERVICE_SCAN_SCH, 247 WMI_MAIN_SERVICE_CSA_OFFLOAD, 248 WMI_MAIN_SERVICE_CHATTER, 249 WMI_MAIN_SERVICE_COEX_FREQAVOID, 250 WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 251 WMI_MAIN_SERVICE_FORCE_FW_HANG, 252 WMI_MAIN_SERVICE_GPIO, 253 WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 254 WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 255 WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 256 WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 257 WMI_MAIN_SERVICE_TX_ENCAP, 258 }; 259 260 enum wmi_10_4_service { 261 WMI_10_4_SERVICE_BEACON_OFFLOAD = 0, 262 WMI_10_4_SERVICE_SCAN_OFFLOAD, 263 WMI_10_4_SERVICE_ROAM_OFFLOAD, 264 WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 265 WMI_10_4_SERVICE_STA_PWRSAVE, 266 WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 267 WMI_10_4_SERVICE_AP_UAPSD, 268 WMI_10_4_SERVICE_AP_DFS, 269 WMI_10_4_SERVICE_11AC, 270 WMI_10_4_SERVICE_BLOCKACK, 271 WMI_10_4_SERVICE_PHYERR, 272 WMI_10_4_SERVICE_BCN_FILTER, 273 WMI_10_4_SERVICE_RTT, 274 WMI_10_4_SERVICE_RATECTRL, 275 WMI_10_4_SERVICE_WOW, 276 WMI_10_4_SERVICE_RATECTRL_CACHE, 277 WMI_10_4_SERVICE_IRAM_TIDS, 278 WMI_10_4_SERVICE_BURST, 279 WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 280 WMI_10_4_SERVICE_GTK_OFFLOAD, 281 WMI_10_4_SERVICE_SCAN_SCH, 282 WMI_10_4_SERVICE_CSA_OFFLOAD, 283 WMI_10_4_SERVICE_CHATTER, 284 WMI_10_4_SERVICE_COEX_FREQAVOID, 285 WMI_10_4_SERVICE_PACKET_POWER_SAVE, 286 WMI_10_4_SERVICE_FORCE_FW_HANG, 287 WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 288 WMI_10_4_SERVICE_GPIO, 289 WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 290 WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 291 WMI_10_4_SERVICE_STA_KEEP_ALIVE, 292 WMI_10_4_SERVICE_TX_ENCAP, 293 WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 294 WMI_10_4_SERVICE_EARLY_RX, 295 WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 296 WMI_10_4_SERVICE_TT, 297 WMI_10_4_SERVICE_ATF, 298 WMI_10_4_SERVICE_PEER_CACHING, 299 WMI_10_4_SERVICE_COEX_GPIO, 300 WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 301 WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 302 WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 303 WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 304 WMI_10_4_SERVICE_MESH_NON_11S, 305 WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 306 WMI_10_4_SERVICE_PEER_STATS, 307 WMI_10_4_SERVICE_MESH_11S, 308 WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 309 WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 310 WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 311 }; 312 313 static inline char *wmi_service_name(int service_id) 314 { 315 #define SVCSTR(x) case x: return #x 316 317 switch (service_id) { 318 SVCSTR(WMI_SERVICE_BEACON_OFFLOAD); 319 SVCSTR(WMI_SERVICE_SCAN_OFFLOAD); 320 SVCSTR(WMI_SERVICE_ROAM_OFFLOAD); 321 SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD); 322 SVCSTR(WMI_SERVICE_STA_PWRSAVE); 323 SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE); 324 SVCSTR(WMI_SERVICE_AP_UAPSD); 325 SVCSTR(WMI_SERVICE_AP_DFS); 326 SVCSTR(WMI_SERVICE_11AC); 327 SVCSTR(WMI_SERVICE_BLOCKACK); 328 SVCSTR(WMI_SERVICE_PHYERR); 329 SVCSTR(WMI_SERVICE_BCN_FILTER); 330 SVCSTR(WMI_SERVICE_RTT); 331 SVCSTR(WMI_SERVICE_RATECTRL); 332 SVCSTR(WMI_SERVICE_WOW); 333 SVCSTR(WMI_SERVICE_RATECTRL_CACHE); 334 SVCSTR(WMI_SERVICE_IRAM_TIDS); 335 SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD); 336 SVCSTR(WMI_SERVICE_NLO); 337 SVCSTR(WMI_SERVICE_GTK_OFFLOAD); 338 SVCSTR(WMI_SERVICE_SCAN_SCH); 339 SVCSTR(WMI_SERVICE_CSA_OFFLOAD); 340 SVCSTR(WMI_SERVICE_CHATTER); 341 SVCSTR(WMI_SERVICE_COEX_FREQAVOID); 342 SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE); 343 SVCSTR(WMI_SERVICE_FORCE_FW_HANG); 344 SVCSTR(WMI_SERVICE_GPIO); 345 SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM); 346 SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG); 347 SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG); 348 SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE); 349 SVCSTR(WMI_SERVICE_TX_ENCAP); 350 SVCSTR(WMI_SERVICE_BURST); 351 SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT); 352 SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT); 353 SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD); 354 SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC); 355 SVCSTR(WMI_SERVICE_EARLY_RX); 356 SVCSTR(WMI_SERVICE_STA_SMPS); 357 SVCSTR(WMI_SERVICE_FWTEST); 358 SVCSTR(WMI_SERVICE_STA_WMMAC); 359 SVCSTR(WMI_SERVICE_TDLS); 360 SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE); 361 SVCSTR(WMI_SERVICE_ADAPTIVE_OCS); 362 SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT); 363 SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE); 364 SVCSTR(WMI_SERVICE_WLAN_HB); 365 SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT); 366 SVCSTR(WMI_SERVICE_BATCH_SCAN); 367 SVCSTR(WMI_SERVICE_QPOWER); 368 SVCSTR(WMI_SERVICE_PLMREQ); 369 SVCSTR(WMI_SERVICE_THERMAL_MGMT); 370 SVCSTR(WMI_SERVICE_RMC); 371 SVCSTR(WMI_SERVICE_MHF_OFFLOAD); 372 SVCSTR(WMI_SERVICE_COEX_SAR); 373 SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE); 374 SVCSTR(WMI_SERVICE_NAN); 375 SVCSTR(WMI_SERVICE_L1SS_STAT); 376 SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED); 377 SVCSTR(WMI_SERVICE_OBSS_SCAN); 378 SVCSTR(WMI_SERVICE_TDLS_OFFCHAN); 379 SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA); 380 SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA); 381 SVCSTR(WMI_SERVICE_IBSS_PWRSAVE); 382 SVCSTR(WMI_SERVICE_LPASS); 383 SVCSTR(WMI_SERVICE_EXTSCAN); 384 SVCSTR(WMI_SERVICE_D0WOW); 385 SVCSTR(WMI_SERVICE_HSOFFLOAD); 386 SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD); 387 SVCSTR(WMI_SERVICE_RX_FULL_REORDER); 388 SVCSTR(WMI_SERVICE_DHCP_OFFLOAD); 389 SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT); 390 SVCSTR(WMI_SERVICE_MDNS_OFFLOAD); 391 SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD); 392 SVCSTR(WMI_SERVICE_ATF); 393 SVCSTR(WMI_SERVICE_COEX_GPIO); 394 SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA); 395 SVCSTR(WMI_SERVICE_TT); 396 SVCSTR(WMI_SERVICE_PEER_CACHING); 397 SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF); 398 SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF); 399 SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64); 400 SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT); 401 SVCSTR(WMI_SERVICE_MESH_11S); 402 SVCSTR(WMI_SERVICE_MESH_NON_11S); 403 SVCSTR(WMI_SERVICE_PEER_STATS); 404 SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT); 405 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY); 406 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL); 407 SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC); 408 default: 409 return NULL; 410 } 411 412 #undef SVCSTR 413 } 414 415 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 416 ((svc_id) < (len) && \ 417 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \ 418 BIT((svc_id) % (sizeof(u32)))) 419 420 #define SVCMAP(x, y, len) \ 421 do { \ 422 if (WMI_SERVICE_IS_ENABLED((in), (x), (len))) \ 423 __set_bit(y, out); \ 424 } while (0) 425 426 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out, 427 size_t len) 428 { 429 SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD, 430 WMI_SERVICE_BEACON_OFFLOAD, len); 431 SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD, 432 WMI_SERVICE_SCAN_OFFLOAD, len); 433 SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD, 434 WMI_SERVICE_ROAM_OFFLOAD, len); 435 SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 436 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 437 SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE, 438 WMI_SERVICE_STA_PWRSAVE, len); 439 SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 440 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 441 SVCMAP(WMI_10X_SERVICE_AP_UAPSD, 442 WMI_SERVICE_AP_UAPSD, len); 443 SVCMAP(WMI_10X_SERVICE_AP_DFS, 444 WMI_SERVICE_AP_DFS, len); 445 SVCMAP(WMI_10X_SERVICE_11AC, 446 WMI_SERVICE_11AC, len); 447 SVCMAP(WMI_10X_SERVICE_BLOCKACK, 448 WMI_SERVICE_BLOCKACK, len); 449 SVCMAP(WMI_10X_SERVICE_PHYERR, 450 WMI_SERVICE_PHYERR, len); 451 SVCMAP(WMI_10X_SERVICE_BCN_FILTER, 452 WMI_SERVICE_BCN_FILTER, len); 453 SVCMAP(WMI_10X_SERVICE_RTT, 454 WMI_SERVICE_RTT, len); 455 SVCMAP(WMI_10X_SERVICE_RATECTRL, 456 WMI_SERVICE_RATECTRL, len); 457 SVCMAP(WMI_10X_SERVICE_WOW, 458 WMI_SERVICE_WOW, len); 459 SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE, 460 WMI_SERVICE_RATECTRL_CACHE, len); 461 SVCMAP(WMI_10X_SERVICE_IRAM_TIDS, 462 WMI_SERVICE_IRAM_TIDS, len); 463 SVCMAP(WMI_10X_SERVICE_BURST, 464 WMI_SERVICE_BURST, len); 465 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 466 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 467 SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG, 468 WMI_SERVICE_FORCE_FW_HANG, len); 469 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 470 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 471 SVCMAP(WMI_10X_SERVICE_ATF, 472 WMI_SERVICE_ATF, len); 473 SVCMAP(WMI_10X_SERVICE_COEX_GPIO, 474 WMI_SERVICE_COEX_GPIO, len); 475 SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 476 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 477 SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 478 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 479 SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 480 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 481 SVCMAP(WMI_10X_SERVICE_MESH, 482 WMI_SERVICE_MESH_11S, len); 483 SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 484 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 485 SVCMAP(WMI_10X_SERVICE_PEER_STATS, 486 WMI_SERVICE_PEER_STATS, len); 487 } 488 489 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out, 490 size_t len) 491 { 492 SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD, 493 WMI_SERVICE_BEACON_OFFLOAD, len); 494 SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD, 495 WMI_SERVICE_SCAN_OFFLOAD, len); 496 SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD, 497 WMI_SERVICE_ROAM_OFFLOAD, len); 498 SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 499 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 500 SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE, 501 WMI_SERVICE_STA_PWRSAVE, len); 502 SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 503 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 504 SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD, 505 WMI_SERVICE_AP_UAPSD, len); 506 SVCMAP(WMI_MAIN_SERVICE_AP_DFS, 507 WMI_SERVICE_AP_DFS, len); 508 SVCMAP(WMI_MAIN_SERVICE_11AC, 509 WMI_SERVICE_11AC, len); 510 SVCMAP(WMI_MAIN_SERVICE_BLOCKACK, 511 WMI_SERVICE_BLOCKACK, len); 512 SVCMAP(WMI_MAIN_SERVICE_PHYERR, 513 WMI_SERVICE_PHYERR, len); 514 SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER, 515 WMI_SERVICE_BCN_FILTER, len); 516 SVCMAP(WMI_MAIN_SERVICE_RTT, 517 WMI_SERVICE_RTT, len); 518 SVCMAP(WMI_MAIN_SERVICE_RATECTRL, 519 WMI_SERVICE_RATECTRL, len); 520 SVCMAP(WMI_MAIN_SERVICE_WOW, 521 WMI_SERVICE_WOW, len); 522 SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE, 523 WMI_SERVICE_RATECTRL_CACHE, len); 524 SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS, 525 WMI_SERVICE_IRAM_TIDS, len); 526 SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 527 WMI_SERVICE_ARPNS_OFFLOAD, len); 528 SVCMAP(WMI_MAIN_SERVICE_NLO, 529 WMI_SERVICE_NLO, len); 530 SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD, 531 WMI_SERVICE_GTK_OFFLOAD, len); 532 SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH, 533 WMI_SERVICE_SCAN_SCH, len); 534 SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD, 535 WMI_SERVICE_CSA_OFFLOAD, len); 536 SVCMAP(WMI_MAIN_SERVICE_CHATTER, 537 WMI_SERVICE_CHATTER, len); 538 SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID, 539 WMI_SERVICE_COEX_FREQAVOID, len); 540 SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 541 WMI_SERVICE_PACKET_POWER_SAVE, len); 542 SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG, 543 WMI_SERVICE_FORCE_FW_HANG, len); 544 SVCMAP(WMI_MAIN_SERVICE_GPIO, 545 WMI_SERVICE_GPIO, len); 546 SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 547 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len); 548 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 549 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 550 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 551 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 552 SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 553 WMI_SERVICE_STA_KEEP_ALIVE, len); 554 SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP, 555 WMI_SERVICE_TX_ENCAP, len); 556 } 557 558 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out, 559 size_t len) 560 { 561 SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD, 562 WMI_SERVICE_BEACON_OFFLOAD, len); 563 SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD, 564 WMI_SERVICE_SCAN_OFFLOAD, len); 565 SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD, 566 WMI_SERVICE_ROAM_OFFLOAD, len); 567 SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 568 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 569 SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE, 570 WMI_SERVICE_STA_PWRSAVE, len); 571 SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 572 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 573 SVCMAP(WMI_10_4_SERVICE_AP_UAPSD, 574 WMI_SERVICE_AP_UAPSD, len); 575 SVCMAP(WMI_10_4_SERVICE_AP_DFS, 576 WMI_SERVICE_AP_DFS, len); 577 SVCMAP(WMI_10_4_SERVICE_11AC, 578 WMI_SERVICE_11AC, len); 579 SVCMAP(WMI_10_4_SERVICE_BLOCKACK, 580 WMI_SERVICE_BLOCKACK, len); 581 SVCMAP(WMI_10_4_SERVICE_PHYERR, 582 WMI_SERVICE_PHYERR, len); 583 SVCMAP(WMI_10_4_SERVICE_BCN_FILTER, 584 WMI_SERVICE_BCN_FILTER, len); 585 SVCMAP(WMI_10_4_SERVICE_RTT, 586 WMI_SERVICE_RTT, len); 587 SVCMAP(WMI_10_4_SERVICE_RATECTRL, 588 WMI_SERVICE_RATECTRL, len); 589 SVCMAP(WMI_10_4_SERVICE_WOW, 590 WMI_SERVICE_WOW, len); 591 SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE, 592 WMI_SERVICE_RATECTRL_CACHE, len); 593 SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS, 594 WMI_SERVICE_IRAM_TIDS, len); 595 SVCMAP(WMI_10_4_SERVICE_BURST, 596 WMI_SERVICE_BURST, len); 597 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 598 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 599 SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD, 600 WMI_SERVICE_GTK_OFFLOAD, len); 601 SVCMAP(WMI_10_4_SERVICE_SCAN_SCH, 602 WMI_SERVICE_SCAN_SCH, len); 603 SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD, 604 WMI_SERVICE_CSA_OFFLOAD, len); 605 SVCMAP(WMI_10_4_SERVICE_CHATTER, 606 WMI_SERVICE_CHATTER, len); 607 SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID, 608 WMI_SERVICE_COEX_FREQAVOID, len); 609 SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE, 610 WMI_SERVICE_PACKET_POWER_SAVE, len); 611 SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG, 612 WMI_SERVICE_FORCE_FW_HANG, len); 613 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 614 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 615 SVCMAP(WMI_10_4_SERVICE_GPIO, 616 WMI_SERVICE_GPIO, len); 617 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 618 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 619 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 620 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 621 SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE, 622 WMI_SERVICE_STA_KEEP_ALIVE, len); 623 SVCMAP(WMI_10_4_SERVICE_TX_ENCAP, 624 WMI_SERVICE_TX_ENCAP, len); 625 SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 626 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len); 627 SVCMAP(WMI_10_4_SERVICE_EARLY_RX, 628 WMI_SERVICE_EARLY_RX, len); 629 SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 630 WMI_SERVICE_ENHANCED_PROXY_STA, len); 631 SVCMAP(WMI_10_4_SERVICE_TT, 632 WMI_SERVICE_TT, len); 633 SVCMAP(WMI_10_4_SERVICE_ATF, 634 WMI_SERVICE_ATF, len); 635 SVCMAP(WMI_10_4_SERVICE_PEER_CACHING, 636 WMI_SERVICE_PEER_CACHING, len); 637 SVCMAP(WMI_10_4_SERVICE_COEX_GPIO, 638 WMI_SERVICE_COEX_GPIO, len); 639 SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 640 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 641 SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 642 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 643 SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 644 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 645 SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 646 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 647 SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S, 648 WMI_SERVICE_MESH_NON_11S, len); 649 SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 650 WMI_SERVICE_RESTRT_CHNL_SUPPORT, len); 651 SVCMAP(WMI_10_4_SERVICE_PEER_STATS, 652 WMI_SERVICE_PEER_STATS, len); 653 SVCMAP(WMI_10_4_SERVICE_MESH_11S, 654 WMI_SERVICE_MESH_11S, len); 655 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 656 WMI_SERVICE_TX_MODE_PUSH_ONLY, len); 657 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 658 WMI_SERVICE_TX_MODE_PUSH_PULL, len); 659 SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 660 WMI_SERVICE_TX_MODE_DYNAMIC, len); 661 } 662 663 #undef SVCMAP 664 665 /* 2 word representation of MAC addr */ 666 struct wmi_mac_addr { 667 union { 668 u8 addr[6]; 669 struct { 670 u32 word0; 671 u32 word1; 672 } __packed; 673 } __packed; 674 } __packed; 675 676 struct wmi_cmd_map { 677 u32 init_cmdid; 678 u32 start_scan_cmdid; 679 u32 stop_scan_cmdid; 680 u32 scan_chan_list_cmdid; 681 u32 scan_sch_prio_tbl_cmdid; 682 u32 pdev_set_regdomain_cmdid; 683 u32 pdev_set_channel_cmdid; 684 u32 pdev_set_param_cmdid; 685 u32 pdev_pktlog_enable_cmdid; 686 u32 pdev_pktlog_disable_cmdid; 687 u32 pdev_set_wmm_params_cmdid; 688 u32 pdev_set_ht_cap_ie_cmdid; 689 u32 pdev_set_vht_cap_ie_cmdid; 690 u32 pdev_set_dscp_tid_map_cmdid; 691 u32 pdev_set_quiet_mode_cmdid; 692 u32 pdev_green_ap_ps_enable_cmdid; 693 u32 pdev_get_tpc_config_cmdid; 694 u32 pdev_set_base_macaddr_cmdid; 695 u32 vdev_create_cmdid; 696 u32 vdev_delete_cmdid; 697 u32 vdev_start_request_cmdid; 698 u32 vdev_restart_request_cmdid; 699 u32 vdev_up_cmdid; 700 u32 vdev_stop_cmdid; 701 u32 vdev_down_cmdid; 702 u32 vdev_set_param_cmdid; 703 u32 vdev_install_key_cmdid; 704 u32 peer_create_cmdid; 705 u32 peer_delete_cmdid; 706 u32 peer_flush_tids_cmdid; 707 u32 peer_set_param_cmdid; 708 u32 peer_assoc_cmdid; 709 u32 peer_add_wds_entry_cmdid; 710 u32 peer_remove_wds_entry_cmdid; 711 u32 peer_mcast_group_cmdid; 712 u32 bcn_tx_cmdid; 713 u32 pdev_send_bcn_cmdid; 714 u32 bcn_tmpl_cmdid; 715 u32 bcn_filter_rx_cmdid; 716 u32 prb_req_filter_rx_cmdid; 717 u32 mgmt_tx_cmdid; 718 u32 prb_tmpl_cmdid; 719 u32 addba_clear_resp_cmdid; 720 u32 addba_send_cmdid; 721 u32 addba_status_cmdid; 722 u32 delba_send_cmdid; 723 u32 addba_set_resp_cmdid; 724 u32 send_singleamsdu_cmdid; 725 u32 sta_powersave_mode_cmdid; 726 u32 sta_powersave_param_cmdid; 727 u32 sta_mimo_ps_mode_cmdid; 728 u32 pdev_dfs_enable_cmdid; 729 u32 pdev_dfs_disable_cmdid; 730 u32 roam_scan_mode; 731 u32 roam_scan_rssi_threshold; 732 u32 roam_scan_period; 733 u32 roam_scan_rssi_change_threshold; 734 u32 roam_ap_profile; 735 u32 ofl_scan_add_ap_profile; 736 u32 ofl_scan_remove_ap_profile; 737 u32 ofl_scan_period; 738 u32 p2p_dev_set_device_info; 739 u32 p2p_dev_set_discoverability; 740 u32 p2p_go_set_beacon_ie; 741 u32 p2p_go_set_probe_resp_ie; 742 u32 p2p_set_vendor_ie_data_cmdid; 743 u32 ap_ps_peer_param_cmdid; 744 u32 ap_ps_peer_uapsd_coex_cmdid; 745 u32 peer_rate_retry_sched_cmdid; 746 u32 wlan_profile_trigger_cmdid; 747 u32 wlan_profile_set_hist_intvl_cmdid; 748 u32 wlan_profile_get_profile_data_cmdid; 749 u32 wlan_profile_enable_profile_id_cmdid; 750 u32 wlan_profile_list_profile_id_cmdid; 751 u32 pdev_suspend_cmdid; 752 u32 pdev_resume_cmdid; 753 u32 add_bcn_filter_cmdid; 754 u32 rmv_bcn_filter_cmdid; 755 u32 wow_add_wake_pattern_cmdid; 756 u32 wow_del_wake_pattern_cmdid; 757 u32 wow_enable_disable_wake_event_cmdid; 758 u32 wow_enable_cmdid; 759 u32 wow_hostwakeup_from_sleep_cmdid; 760 u32 rtt_measreq_cmdid; 761 u32 rtt_tsf_cmdid; 762 u32 vdev_spectral_scan_configure_cmdid; 763 u32 vdev_spectral_scan_enable_cmdid; 764 u32 request_stats_cmdid; 765 u32 set_arp_ns_offload_cmdid; 766 u32 network_list_offload_config_cmdid; 767 u32 gtk_offload_cmdid; 768 u32 csa_offload_enable_cmdid; 769 u32 csa_offload_chanswitch_cmdid; 770 u32 chatter_set_mode_cmdid; 771 u32 peer_tid_addba_cmdid; 772 u32 peer_tid_delba_cmdid; 773 u32 sta_dtim_ps_method_cmdid; 774 u32 sta_uapsd_auto_trig_cmdid; 775 u32 sta_keepalive_cmd; 776 u32 echo_cmdid; 777 u32 pdev_utf_cmdid; 778 u32 dbglog_cfg_cmdid; 779 u32 pdev_qvit_cmdid; 780 u32 pdev_ftm_intg_cmdid; 781 u32 vdev_set_keepalive_cmdid; 782 u32 vdev_get_keepalive_cmdid; 783 u32 force_fw_hang_cmdid; 784 u32 gpio_config_cmdid; 785 u32 gpio_output_cmdid; 786 u32 pdev_get_temperature_cmdid; 787 u32 vdev_set_wmm_params_cmdid; 788 u32 tdls_set_state_cmdid; 789 u32 tdls_peer_update_cmdid; 790 u32 adaptive_qcs_cmdid; 791 u32 scan_update_request_cmdid; 792 u32 vdev_standby_response_cmdid; 793 u32 vdev_resume_response_cmdid; 794 u32 wlan_peer_caching_add_peer_cmdid; 795 u32 wlan_peer_caching_evict_peer_cmdid; 796 u32 wlan_peer_caching_restore_peer_cmdid; 797 u32 wlan_peer_caching_print_all_peers_info_cmdid; 798 u32 peer_update_wds_entry_cmdid; 799 u32 peer_add_proxy_sta_entry_cmdid; 800 u32 rtt_keepalive_cmdid; 801 u32 oem_req_cmdid; 802 u32 nan_cmdid; 803 u32 vdev_ratemask_cmdid; 804 u32 qboost_cfg_cmdid; 805 u32 pdev_smart_ant_enable_cmdid; 806 u32 pdev_smart_ant_set_rx_antenna_cmdid; 807 u32 peer_smart_ant_set_tx_antenna_cmdid; 808 u32 peer_smart_ant_set_train_info_cmdid; 809 u32 peer_smart_ant_set_node_config_ops_cmdid; 810 u32 pdev_set_antenna_switch_table_cmdid; 811 u32 pdev_set_ctl_table_cmdid; 812 u32 pdev_set_mimogain_table_cmdid; 813 u32 pdev_ratepwr_table_cmdid; 814 u32 pdev_ratepwr_chainmsk_table_cmdid; 815 u32 pdev_fips_cmdid; 816 u32 tt_set_conf_cmdid; 817 u32 fwtest_cmdid; 818 u32 vdev_atf_request_cmdid; 819 u32 peer_atf_request_cmdid; 820 u32 pdev_get_ani_cck_config_cmdid; 821 u32 pdev_get_ani_ofdm_config_cmdid; 822 u32 pdev_reserve_ast_entry_cmdid; 823 u32 pdev_get_nfcal_power_cmdid; 824 u32 pdev_get_tpc_cmdid; 825 u32 pdev_get_ast_info_cmdid; 826 u32 vdev_set_dscp_tid_map_cmdid; 827 u32 pdev_get_info_cmdid; 828 u32 vdev_get_info_cmdid; 829 u32 vdev_filter_neighbor_rx_packets_cmdid; 830 u32 mu_cal_start_cmdid; 831 u32 set_cca_params_cmdid; 832 u32 pdev_bss_chan_info_request_cmdid; 833 u32 pdev_enable_adaptive_cca_cmdid; 834 u32 ext_resource_cfg_cmdid; 835 }; 836 837 /* 838 * wmi command groups. 839 */ 840 enum wmi_cmd_group { 841 /* 0 to 2 are reserved */ 842 WMI_GRP_START = 0x3, 843 WMI_GRP_SCAN = WMI_GRP_START, 844 WMI_GRP_PDEV, 845 WMI_GRP_VDEV, 846 WMI_GRP_PEER, 847 WMI_GRP_MGMT, 848 WMI_GRP_BA_NEG, 849 WMI_GRP_STA_PS, 850 WMI_GRP_DFS, 851 WMI_GRP_ROAM, 852 WMI_GRP_OFL_SCAN, 853 WMI_GRP_P2P, 854 WMI_GRP_AP_PS, 855 WMI_GRP_RATE_CTRL, 856 WMI_GRP_PROFILE, 857 WMI_GRP_SUSPEND, 858 WMI_GRP_BCN_FILTER, 859 WMI_GRP_WOW, 860 WMI_GRP_RTT, 861 WMI_GRP_SPECTRAL, 862 WMI_GRP_STATS, 863 WMI_GRP_ARP_NS_OFL, 864 WMI_GRP_NLO_OFL, 865 WMI_GRP_GTK_OFL, 866 WMI_GRP_CSA_OFL, 867 WMI_GRP_CHATTER, 868 WMI_GRP_TID_ADDBA, 869 WMI_GRP_MISC, 870 WMI_GRP_GPIO, 871 }; 872 873 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1) 874 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1) 875 876 #define WMI_CMD_UNSUPPORTED 0 877 878 /* Command IDs and command events for MAIN FW. */ 879 enum wmi_cmd_id { 880 WMI_INIT_CMDID = 0x1, 881 882 /* Scan specific commands */ 883 WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN), 884 WMI_STOP_SCAN_CMDID, 885 WMI_SCAN_CHAN_LIST_CMDID, 886 WMI_SCAN_SCH_PRIO_TBL_CMDID, 887 888 /* PDEV (physical device) specific commands */ 889 WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV), 890 WMI_PDEV_SET_CHANNEL_CMDID, 891 WMI_PDEV_SET_PARAM_CMDID, 892 WMI_PDEV_PKTLOG_ENABLE_CMDID, 893 WMI_PDEV_PKTLOG_DISABLE_CMDID, 894 WMI_PDEV_SET_WMM_PARAMS_CMDID, 895 WMI_PDEV_SET_HT_CAP_IE_CMDID, 896 WMI_PDEV_SET_VHT_CAP_IE_CMDID, 897 WMI_PDEV_SET_DSCP_TID_MAP_CMDID, 898 WMI_PDEV_SET_QUIET_MODE_CMDID, 899 WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID, 900 WMI_PDEV_GET_TPC_CONFIG_CMDID, 901 WMI_PDEV_SET_BASE_MACADDR_CMDID, 902 903 /* VDEV (virtual device) specific commands */ 904 WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV), 905 WMI_VDEV_DELETE_CMDID, 906 WMI_VDEV_START_REQUEST_CMDID, 907 WMI_VDEV_RESTART_REQUEST_CMDID, 908 WMI_VDEV_UP_CMDID, 909 WMI_VDEV_STOP_CMDID, 910 WMI_VDEV_DOWN_CMDID, 911 WMI_VDEV_SET_PARAM_CMDID, 912 WMI_VDEV_INSTALL_KEY_CMDID, 913 914 /* peer specific commands */ 915 WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER), 916 WMI_PEER_DELETE_CMDID, 917 WMI_PEER_FLUSH_TIDS_CMDID, 918 WMI_PEER_SET_PARAM_CMDID, 919 WMI_PEER_ASSOC_CMDID, 920 WMI_PEER_ADD_WDS_ENTRY_CMDID, 921 WMI_PEER_REMOVE_WDS_ENTRY_CMDID, 922 WMI_PEER_MCAST_GROUP_CMDID, 923 924 /* beacon/management specific commands */ 925 WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT), 926 WMI_PDEV_SEND_BCN_CMDID, 927 WMI_BCN_TMPL_CMDID, 928 WMI_BCN_FILTER_RX_CMDID, 929 WMI_PRB_REQ_FILTER_RX_CMDID, 930 WMI_MGMT_TX_CMDID, 931 WMI_PRB_TMPL_CMDID, 932 933 /* commands to directly control BA negotiation directly from host. */ 934 WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG), 935 WMI_ADDBA_SEND_CMDID, 936 WMI_ADDBA_STATUS_CMDID, 937 WMI_DELBA_SEND_CMDID, 938 WMI_ADDBA_SET_RESP_CMDID, 939 WMI_SEND_SINGLEAMSDU_CMDID, 940 941 /* Station power save specific config */ 942 WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS), 943 WMI_STA_POWERSAVE_PARAM_CMDID, 944 WMI_STA_MIMO_PS_MODE_CMDID, 945 946 /** DFS-specific commands */ 947 WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS), 948 WMI_PDEV_DFS_DISABLE_CMDID, 949 950 /* Roaming specific commands */ 951 WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM), 952 WMI_ROAM_SCAN_RSSI_THRESHOLD, 953 WMI_ROAM_SCAN_PERIOD, 954 WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 955 WMI_ROAM_AP_PROFILE, 956 957 /* offload scan specific commands */ 958 WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN), 959 WMI_OFL_SCAN_REMOVE_AP_PROFILE, 960 WMI_OFL_SCAN_PERIOD, 961 962 /* P2P specific commands */ 963 WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P), 964 WMI_P2P_DEV_SET_DISCOVERABILITY, 965 WMI_P2P_GO_SET_BEACON_IE, 966 WMI_P2P_GO_SET_PROBE_RESP_IE, 967 WMI_P2P_SET_VENDOR_IE_DATA_CMDID, 968 969 /* AP power save specific config */ 970 WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS), 971 WMI_AP_PS_PEER_UAPSD_COEX_CMDID, 972 973 /* Rate-control specific commands */ 974 WMI_PEER_RATE_RETRY_SCHED_CMDID = 975 WMI_CMD_GRP(WMI_GRP_RATE_CTRL), 976 977 /* WLAN Profiling commands. */ 978 WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE), 979 WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 980 WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 981 WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 982 WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 983 984 /* Suspend resume command Ids */ 985 WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND), 986 WMI_PDEV_RESUME_CMDID, 987 988 /* Beacon filter commands */ 989 WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER), 990 WMI_RMV_BCN_FILTER_CMDID, 991 992 /* WOW Specific WMI commands*/ 993 WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW), 994 WMI_WOW_DEL_WAKE_PATTERN_CMDID, 995 WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 996 WMI_WOW_ENABLE_CMDID, 997 WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 998 999 /* RTT measurement related cmd */ 1000 WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT), 1001 WMI_RTT_TSF_CMDID, 1002 1003 /* spectral scan commands */ 1004 WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL), 1005 WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1006 1007 /* F/W stats */ 1008 WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS), 1009 1010 /* ARP OFFLOAD REQUEST*/ 1011 WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL), 1012 1013 /* NS offload confid*/ 1014 WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL), 1015 1016 /* GTK offload Specific WMI commands*/ 1017 WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL), 1018 1019 /* CSA offload Specific WMI commands*/ 1020 WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL), 1021 WMI_CSA_OFFLOAD_CHANSWITCH_CMDID, 1022 1023 /* Chatter commands*/ 1024 WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER), 1025 1026 /* addba specific commands */ 1027 WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA), 1028 WMI_PEER_TID_DELBA_CMDID, 1029 1030 /* set station mimo powersave method */ 1031 WMI_STA_DTIM_PS_METHOD_CMDID, 1032 /* Configure the Station UAPSD AC Auto Trigger Parameters */ 1033 WMI_STA_UAPSD_AUTO_TRIG_CMDID, 1034 1035 /* STA Keep alive parameter configuration, 1036 Requires WMI_SERVICE_STA_KEEP_ALIVE */ 1037 WMI_STA_KEEPALIVE_CMD, 1038 1039 /* misc command group */ 1040 WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC), 1041 WMI_PDEV_UTF_CMDID, 1042 WMI_DBGLOG_CFG_CMDID, 1043 WMI_PDEV_QVIT_CMDID, 1044 WMI_PDEV_FTM_INTG_CMDID, 1045 WMI_VDEV_SET_KEEPALIVE_CMDID, 1046 WMI_VDEV_GET_KEEPALIVE_CMDID, 1047 WMI_FORCE_FW_HANG_CMDID, 1048 1049 /* GPIO Configuration */ 1050 WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO), 1051 WMI_GPIO_OUTPUT_CMDID, 1052 }; 1053 1054 enum wmi_event_id { 1055 WMI_SERVICE_READY_EVENTID = 0x1, 1056 WMI_READY_EVENTID, 1057 1058 /* Scan specific events */ 1059 WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN), 1060 1061 /* PDEV specific events */ 1062 WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV), 1063 WMI_CHAN_INFO_EVENTID, 1064 WMI_PHYERR_EVENTID, 1065 1066 /* VDEV specific events */ 1067 WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV), 1068 WMI_VDEV_STOPPED_EVENTID, 1069 WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID, 1070 1071 /* peer specific events */ 1072 WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER), 1073 1074 /* beacon/mgmt specific events */ 1075 WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT), 1076 WMI_HOST_SWBA_EVENTID, 1077 WMI_TBTTOFFSET_UPDATE_EVENTID, 1078 1079 /* ADDBA Related WMI Events*/ 1080 WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG), 1081 WMI_TX_ADDBA_COMPLETE_EVENTID, 1082 1083 /* Roam event to trigger roaming on host */ 1084 WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM), 1085 WMI_PROFILE_MATCH, 1086 1087 /* WoW */ 1088 WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW), 1089 1090 /* RTT */ 1091 WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT), 1092 WMI_TSF_MEASUREMENT_REPORT_EVENTID, 1093 WMI_RTT_ERROR_REPORT_EVENTID, 1094 1095 /* GTK offload */ 1096 WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL), 1097 WMI_GTK_REKEY_FAIL_EVENTID, 1098 1099 /* CSA IE received event */ 1100 WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL), 1101 1102 /* Misc events */ 1103 WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC), 1104 WMI_PDEV_UTF_EVENTID, 1105 WMI_DEBUG_MESG_EVENTID, 1106 WMI_UPDATE_STATS_EVENTID, 1107 WMI_DEBUG_PRINT_EVENTID, 1108 WMI_DCS_INTERFERENCE_EVENTID, 1109 WMI_PDEV_QVIT_EVENTID, 1110 WMI_WLAN_PROFILE_DATA_EVENTID, 1111 WMI_PDEV_FTM_INTG_EVENTID, 1112 WMI_WLAN_FREQ_AVOID_EVENTID, 1113 WMI_VDEV_GET_KEEPALIVE_EVENTID, 1114 1115 /* GPIO Event */ 1116 WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO), 1117 }; 1118 1119 /* Command IDs and command events for 10.X firmware */ 1120 enum wmi_10x_cmd_id { 1121 WMI_10X_START_CMDID = 0x9000, 1122 WMI_10X_END_CMDID = 0x9FFF, 1123 1124 /* initialize the wlan sub system */ 1125 WMI_10X_INIT_CMDID, 1126 1127 /* Scan specific commands */ 1128 1129 WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID, 1130 WMI_10X_STOP_SCAN_CMDID, 1131 WMI_10X_SCAN_CHAN_LIST_CMDID, 1132 WMI_10X_ECHO_CMDID, 1133 1134 /* PDEV(physical device) specific commands */ 1135 WMI_10X_PDEV_SET_REGDOMAIN_CMDID, 1136 WMI_10X_PDEV_SET_CHANNEL_CMDID, 1137 WMI_10X_PDEV_SET_PARAM_CMDID, 1138 WMI_10X_PDEV_PKTLOG_ENABLE_CMDID, 1139 WMI_10X_PDEV_PKTLOG_DISABLE_CMDID, 1140 WMI_10X_PDEV_SET_WMM_PARAMS_CMDID, 1141 WMI_10X_PDEV_SET_HT_CAP_IE_CMDID, 1142 WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID, 1143 WMI_10X_PDEV_SET_BASE_MACADDR_CMDID, 1144 WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID, 1145 WMI_10X_PDEV_SET_QUIET_MODE_CMDID, 1146 WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1147 WMI_10X_PDEV_GET_TPC_CONFIG_CMDID, 1148 1149 /* VDEV(virtual device) specific commands */ 1150 WMI_10X_VDEV_CREATE_CMDID, 1151 WMI_10X_VDEV_DELETE_CMDID, 1152 WMI_10X_VDEV_START_REQUEST_CMDID, 1153 WMI_10X_VDEV_RESTART_REQUEST_CMDID, 1154 WMI_10X_VDEV_UP_CMDID, 1155 WMI_10X_VDEV_STOP_CMDID, 1156 WMI_10X_VDEV_DOWN_CMDID, 1157 WMI_10X_VDEV_STANDBY_RESPONSE_CMDID, 1158 WMI_10X_VDEV_RESUME_RESPONSE_CMDID, 1159 WMI_10X_VDEV_SET_PARAM_CMDID, 1160 WMI_10X_VDEV_INSTALL_KEY_CMDID, 1161 1162 /* peer specific commands */ 1163 WMI_10X_PEER_CREATE_CMDID, 1164 WMI_10X_PEER_DELETE_CMDID, 1165 WMI_10X_PEER_FLUSH_TIDS_CMDID, 1166 WMI_10X_PEER_SET_PARAM_CMDID, 1167 WMI_10X_PEER_ASSOC_CMDID, 1168 WMI_10X_PEER_ADD_WDS_ENTRY_CMDID, 1169 WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID, 1170 WMI_10X_PEER_MCAST_GROUP_CMDID, 1171 1172 /* beacon/management specific commands */ 1173 1174 WMI_10X_BCN_TX_CMDID, 1175 WMI_10X_BCN_PRB_TMPL_CMDID, 1176 WMI_10X_BCN_FILTER_RX_CMDID, 1177 WMI_10X_PRB_REQ_FILTER_RX_CMDID, 1178 WMI_10X_MGMT_TX_CMDID, 1179 1180 /* commands to directly control ba negotiation directly from host. */ 1181 WMI_10X_ADDBA_CLEAR_RESP_CMDID, 1182 WMI_10X_ADDBA_SEND_CMDID, 1183 WMI_10X_ADDBA_STATUS_CMDID, 1184 WMI_10X_DELBA_SEND_CMDID, 1185 WMI_10X_ADDBA_SET_RESP_CMDID, 1186 WMI_10X_SEND_SINGLEAMSDU_CMDID, 1187 1188 /* Station power save specific config */ 1189 WMI_10X_STA_POWERSAVE_MODE_CMDID, 1190 WMI_10X_STA_POWERSAVE_PARAM_CMDID, 1191 WMI_10X_STA_MIMO_PS_MODE_CMDID, 1192 1193 /* set debug log config */ 1194 WMI_10X_DBGLOG_CFG_CMDID, 1195 1196 /* DFS-specific commands */ 1197 WMI_10X_PDEV_DFS_ENABLE_CMDID, 1198 WMI_10X_PDEV_DFS_DISABLE_CMDID, 1199 1200 /* QVIT specific command id */ 1201 WMI_10X_PDEV_QVIT_CMDID, 1202 1203 /* Offload Scan and Roaming related commands */ 1204 WMI_10X_ROAM_SCAN_MODE, 1205 WMI_10X_ROAM_SCAN_RSSI_THRESHOLD, 1206 WMI_10X_ROAM_SCAN_PERIOD, 1207 WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1208 WMI_10X_ROAM_AP_PROFILE, 1209 WMI_10X_OFL_SCAN_ADD_AP_PROFILE, 1210 WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE, 1211 WMI_10X_OFL_SCAN_PERIOD, 1212 1213 /* P2P specific commands */ 1214 WMI_10X_P2P_DEV_SET_DEVICE_INFO, 1215 WMI_10X_P2P_DEV_SET_DISCOVERABILITY, 1216 WMI_10X_P2P_GO_SET_BEACON_IE, 1217 WMI_10X_P2P_GO_SET_PROBE_RESP_IE, 1218 1219 /* AP power save specific config */ 1220 WMI_10X_AP_PS_PEER_PARAM_CMDID, 1221 WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID, 1222 1223 /* Rate-control specific commands */ 1224 WMI_10X_PEER_RATE_RETRY_SCHED_CMDID, 1225 1226 /* WLAN Profiling commands. */ 1227 WMI_10X_WLAN_PROFILE_TRIGGER_CMDID, 1228 WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1229 WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1230 WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1231 WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1232 1233 /* Suspend resume command Ids */ 1234 WMI_10X_PDEV_SUSPEND_CMDID, 1235 WMI_10X_PDEV_RESUME_CMDID, 1236 1237 /* Beacon filter commands */ 1238 WMI_10X_ADD_BCN_FILTER_CMDID, 1239 WMI_10X_RMV_BCN_FILTER_CMDID, 1240 1241 /* WOW Specific WMI commands*/ 1242 WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID, 1243 WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID, 1244 WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1245 WMI_10X_WOW_ENABLE_CMDID, 1246 WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1247 1248 /* RTT measurement related cmd */ 1249 WMI_10X_RTT_MEASREQ_CMDID, 1250 WMI_10X_RTT_TSF_CMDID, 1251 1252 /* transmit beacon by value */ 1253 WMI_10X_PDEV_SEND_BCN_CMDID, 1254 1255 /* F/W stats */ 1256 WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1257 WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1258 WMI_10X_REQUEST_STATS_CMDID, 1259 1260 /* GPIO Configuration */ 1261 WMI_10X_GPIO_CONFIG_CMDID, 1262 WMI_10X_GPIO_OUTPUT_CMDID, 1263 1264 WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1, 1265 }; 1266 1267 enum wmi_10x_event_id { 1268 WMI_10X_SERVICE_READY_EVENTID = 0x8000, 1269 WMI_10X_READY_EVENTID, 1270 WMI_10X_START_EVENTID = 0x9000, 1271 WMI_10X_END_EVENTID = 0x9FFF, 1272 1273 /* Scan specific events */ 1274 WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID, 1275 WMI_10X_ECHO_EVENTID, 1276 WMI_10X_DEBUG_MESG_EVENTID, 1277 WMI_10X_UPDATE_STATS_EVENTID, 1278 1279 /* Instantaneous RSSI event */ 1280 WMI_10X_INST_RSSI_STATS_EVENTID, 1281 1282 /* VDEV specific events */ 1283 WMI_10X_VDEV_START_RESP_EVENTID, 1284 WMI_10X_VDEV_STANDBY_REQ_EVENTID, 1285 WMI_10X_VDEV_RESUME_REQ_EVENTID, 1286 WMI_10X_VDEV_STOPPED_EVENTID, 1287 1288 /* peer specific events */ 1289 WMI_10X_PEER_STA_KICKOUT_EVENTID, 1290 1291 /* beacon/mgmt specific events */ 1292 WMI_10X_HOST_SWBA_EVENTID, 1293 WMI_10X_TBTTOFFSET_UPDATE_EVENTID, 1294 WMI_10X_MGMT_RX_EVENTID, 1295 1296 /* Channel stats event */ 1297 WMI_10X_CHAN_INFO_EVENTID, 1298 1299 /* PHY Error specific WMI event */ 1300 WMI_10X_PHYERR_EVENTID, 1301 1302 /* Roam event to trigger roaming on host */ 1303 WMI_10X_ROAM_EVENTID, 1304 1305 /* matching AP found from list of profiles */ 1306 WMI_10X_PROFILE_MATCH, 1307 1308 /* debug print message used for tracing FW code while debugging */ 1309 WMI_10X_DEBUG_PRINT_EVENTID, 1310 /* VI spoecific event */ 1311 WMI_10X_PDEV_QVIT_EVENTID, 1312 /* FW code profile data in response to profile request */ 1313 WMI_10X_WLAN_PROFILE_DATA_EVENTID, 1314 1315 /*RTT related event ID*/ 1316 WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID, 1317 WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID, 1318 WMI_10X_RTT_ERROR_REPORT_EVENTID, 1319 1320 WMI_10X_WOW_WAKEUP_HOST_EVENTID, 1321 WMI_10X_DCS_INTERFERENCE_EVENTID, 1322 1323 /* TPC config for the current operating channel */ 1324 WMI_10X_PDEV_TPC_CONFIG_EVENTID, 1325 1326 WMI_10X_GPIO_INPUT_EVENTID, 1327 WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1, 1328 }; 1329 1330 enum wmi_10_2_cmd_id { 1331 WMI_10_2_START_CMDID = 0x9000, 1332 WMI_10_2_END_CMDID = 0x9FFF, 1333 WMI_10_2_INIT_CMDID, 1334 WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID, 1335 WMI_10_2_STOP_SCAN_CMDID, 1336 WMI_10_2_SCAN_CHAN_LIST_CMDID, 1337 WMI_10_2_ECHO_CMDID, 1338 WMI_10_2_PDEV_SET_REGDOMAIN_CMDID, 1339 WMI_10_2_PDEV_SET_CHANNEL_CMDID, 1340 WMI_10_2_PDEV_SET_PARAM_CMDID, 1341 WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID, 1342 WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID, 1343 WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID, 1344 WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID, 1345 WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID, 1346 WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID, 1347 WMI_10_2_PDEV_SET_QUIET_MODE_CMDID, 1348 WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1349 WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID, 1350 WMI_10_2_VDEV_CREATE_CMDID, 1351 WMI_10_2_VDEV_DELETE_CMDID, 1352 WMI_10_2_VDEV_START_REQUEST_CMDID, 1353 WMI_10_2_VDEV_RESTART_REQUEST_CMDID, 1354 WMI_10_2_VDEV_UP_CMDID, 1355 WMI_10_2_VDEV_STOP_CMDID, 1356 WMI_10_2_VDEV_DOWN_CMDID, 1357 WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID, 1358 WMI_10_2_VDEV_RESUME_RESPONSE_CMDID, 1359 WMI_10_2_VDEV_SET_PARAM_CMDID, 1360 WMI_10_2_VDEV_INSTALL_KEY_CMDID, 1361 WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID, 1362 WMI_10_2_PEER_CREATE_CMDID, 1363 WMI_10_2_PEER_DELETE_CMDID, 1364 WMI_10_2_PEER_FLUSH_TIDS_CMDID, 1365 WMI_10_2_PEER_SET_PARAM_CMDID, 1366 WMI_10_2_PEER_ASSOC_CMDID, 1367 WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID, 1368 WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID, 1369 WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID, 1370 WMI_10_2_PEER_MCAST_GROUP_CMDID, 1371 WMI_10_2_BCN_TX_CMDID, 1372 WMI_10_2_BCN_PRB_TMPL_CMDID, 1373 WMI_10_2_BCN_FILTER_RX_CMDID, 1374 WMI_10_2_PRB_REQ_FILTER_RX_CMDID, 1375 WMI_10_2_MGMT_TX_CMDID, 1376 WMI_10_2_ADDBA_CLEAR_RESP_CMDID, 1377 WMI_10_2_ADDBA_SEND_CMDID, 1378 WMI_10_2_ADDBA_STATUS_CMDID, 1379 WMI_10_2_DELBA_SEND_CMDID, 1380 WMI_10_2_ADDBA_SET_RESP_CMDID, 1381 WMI_10_2_SEND_SINGLEAMSDU_CMDID, 1382 WMI_10_2_STA_POWERSAVE_MODE_CMDID, 1383 WMI_10_2_STA_POWERSAVE_PARAM_CMDID, 1384 WMI_10_2_STA_MIMO_PS_MODE_CMDID, 1385 WMI_10_2_DBGLOG_CFG_CMDID, 1386 WMI_10_2_PDEV_DFS_ENABLE_CMDID, 1387 WMI_10_2_PDEV_DFS_DISABLE_CMDID, 1388 WMI_10_2_PDEV_QVIT_CMDID, 1389 WMI_10_2_ROAM_SCAN_MODE, 1390 WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD, 1391 WMI_10_2_ROAM_SCAN_PERIOD, 1392 WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1393 WMI_10_2_ROAM_AP_PROFILE, 1394 WMI_10_2_OFL_SCAN_ADD_AP_PROFILE, 1395 WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE, 1396 WMI_10_2_OFL_SCAN_PERIOD, 1397 WMI_10_2_P2P_DEV_SET_DEVICE_INFO, 1398 WMI_10_2_P2P_DEV_SET_DISCOVERABILITY, 1399 WMI_10_2_P2P_GO_SET_BEACON_IE, 1400 WMI_10_2_P2P_GO_SET_PROBE_RESP_IE, 1401 WMI_10_2_AP_PS_PEER_PARAM_CMDID, 1402 WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID, 1403 WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID, 1404 WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID, 1405 WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1406 WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1407 WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1408 WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1409 WMI_10_2_PDEV_SUSPEND_CMDID, 1410 WMI_10_2_PDEV_RESUME_CMDID, 1411 WMI_10_2_ADD_BCN_FILTER_CMDID, 1412 WMI_10_2_RMV_BCN_FILTER_CMDID, 1413 WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID, 1414 WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID, 1415 WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1416 WMI_10_2_WOW_ENABLE_CMDID, 1417 WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1418 WMI_10_2_RTT_MEASREQ_CMDID, 1419 WMI_10_2_RTT_TSF_CMDID, 1420 WMI_10_2_RTT_KEEPALIVE_CMDID, 1421 WMI_10_2_PDEV_SEND_BCN_CMDID, 1422 WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1423 WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1424 WMI_10_2_REQUEST_STATS_CMDID, 1425 WMI_10_2_GPIO_CONFIG_CMDID, 1426 WMI_10_2_GPIO_OUTPUT_CMDID, 1427 WMI_10_2_VDEV_RATEMASK_CMDID, 1428 WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID, 1429 WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1430 WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1431 WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1432 WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1433 WMI_10_2_FORCE_FW_HANG_CMDID, 1434 WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1435 WMI_10_2_PDEV_SET_CTL_TABLE_CMDID, 1436 WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1437 WMI_10_2_PDEV_RATEPWR_TABLE_CMDID, 1438 WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1439 WMI_10_2_PDEV_GET_INFO, 1440 WMI_10_2_VDEV_GET_INFO, 1441 WMI_10_2_VDEV_ATF_REQUEST_CMDID, 1442 WMI_10_2_PEER_ATF_REQUEST_CMDID, 1443 WMI_10_2_PDEV_GET_TEMPERATURE_CMDID, 1444 WMI_10_2_MU_CAL_START_CMDID, 1445 WMI_10_2_SET_LTEU_CONFIG_CMDID, 1446 WMI_10_2_SET_CCA_PARAMS, 1447 WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1448 WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1, 1449 }; 1450 1451 enum wmi_10_2_event_id { 1452 WMI_10_2_SERVICE_READY_EVENTID = 0x8000, 1453 WMI_10_2_READY_EVENTID, 1454 WMI_10_2_DEBUG_MESG_EVENTID, 1455 WMI_10_2_START_EVENTID = 0x9000, 1456 WMI_10_2_END_EVENTID = 0x9FFF, 1457 WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID, 1458 WMI_10_2_ECHO_EVENTID, 1459 WMI_10_2_UPDATE_STATS_EVENTID, 1460 WMI_10_2_INST_RSSI_STATS_EVENTID, 1461 WMI_10_2_VDEV_START_RESP_EVENTID, 1462 WMI_10_2_VDEV_STANDBY_REQ_EVENTID, 1463 WMI_10_2_VDEV_RESUME_REQ_EVENTID, 1464 WMI_10_2_VDEV_STOPPED_EVENTID, 1465 WMI_10_2_PEER_STA_KICKOUT_EVENTID, 1466 WMI_10_2_HOST_SWBA_EVENTID, 1467 WMI_10_2_TBTTOFFSET_UPDATE_EVENTID, 1468 WMI_10_2_MGMT_RX_EVENTID, 1469 WMI_10_2_CHAN_INFO_EVENTID, 1470 WMI_10_2_PHYERR_EVENTID, 1471 WMI_10_2_ROAM_EVENTID, 1472 WMI_10_2_PROFILE_MATCH, 1473 WMI_10_2_DEBUG_PRINT_EVENTID, 1474 WMI_10_2_PDEV_QVIT_EVENTID, 1475 WMI_10_2_WLAN_PROFILE_DATA_EVENTID, 1476 WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID, 1477 WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID, 1478 WMI_10_2_RTT_ERROR_REPORT_EVENTID, 1479 WMI_10_2_RTT_KEEPALIVE_EVENTID, 1480 WMI_10_2_WOW_WAKEUP_HOST_EVENTID, 1481 WMI_10_2_DCS_INTERFERENCE_EVENTID, 1482 WMI_10_2_PDEV_TPC_CONFIG_EVENTID, 1483 WMI_10_2_GPIO_INPUT_EVENTID, 1484 WMI_10_2_PEER_RATECODE_LIST_EVENTID, 1485 WMI_10_2_GENERIC_BUFFER_EVENTID, 1486 WMI_10_2_MCAST_BUF_RELEASE_EVENTID, 1487 WMI_10_2_MCAST_LIST_AGEOUT_EVENTID, 1488 WMI_10_2_WDS_PEER_EVENTID, 1489 WMI_10_2_PEER_STA_PS_STATECHG_EVENTID, 1490 WMI_10_2_PDEV_TEMPERATURE_EVENTID, 1491 WMI_10_2_MU_REPORT_EVENTID, 1492 WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID, 1493 WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1, 1494 }; 1495 1496 enum wmi_10_4_cmd_id { 1497 WMI_10_4_START_CMDID = 0x9000, 1498 WMI_10_4_END_CMDID = 0x9FFF, 1499 WMI_10_4_INIT_CMDID, 1500 WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID, 1501 WMI_10_4_STOP_SCAN_CMDID, 1502 WMI_10_4_SCAN_CHAN_LIST_CMDID, 1503 WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID, 1504 WMI_10_4_SCAN_UPDATE_REQUEST_CMDID, 1505 WMI_10_4_ECHO_CMDID, 1506 WMI_10_4_PDEV_SET_REGDOMAIN_CMDID, 1507 WMI_10_4_PDEV_SET_CHANNEL_CMDID, 1508 WMI_10_4_PDEV_SET_PARAM_CMDID, 1509 WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID, 1510 WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID, 1511 WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID, 1512 WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID, 1513 WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID, 1514 WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID, 1515 WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID, 1516 WMI_10_4_PDEV_SET_QUIET_MODE_CMDID, 1517 WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1518 WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID, 1519 WMI_10_4_VDEV_CREATE_CMDID, 1520 WMI_10_4_VDEV_DELETE_CMDID, 1521 WMI_10_4_VDEV_START_REQUEST_CMDID, 1522 WMI_10_4_VDEV_RESTART_REQUEST_CMDID, 1523 WMI_10_4_VDEV_UP_CMDID, 1524 WMI_10_4_VDEV_STOP_CMDID, 1525 WMI_10_4_VDEV_DOWN_CMDID, 1526 WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID, 1527 WMI_10_4_VDEV_RESUME_RESPONSE_CMDID, 1528 WMI_10_4_VDEV_SET_PARAM_CMDID, 1529 WMI_10_4_VDEV_INSTALL_KEY_CMDID, 1530 WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID, 1531 WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID, 1532 WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID, 1533 WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID, 1534 WMI_10_4_PEER_CREATE_CMDID, 1535 WMI_10_4_PEER_DELETE_CMDID, 1536 WMI_10_4_PEER_FLUSH_TIDS_CMDID, 1537 WMI_10_4_PEER_SET_PARAM_CMDID, 1538 WMI_10_4_PEER_ASSOC_CMDID, 1539 WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID, 1540 WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID, 1541 WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID, 1542 WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID, 1543 WMI_10_4_PEER_MCAST_GROUP_CMDID, 1544 WMI_10_4_BCN_TX_CMDID, 1545 WMI_10_4_PDEV_SEND_BCN_CMDID, 1546 WMI_10_4_BCN_PRB_TMPL_CMDID, 1547 WMI_10_4_BCN_FILTER_RX_CMDID, 1548 WMI_10_4_PRB_REQ_FILTER_RX_CMDID, 1549 WMI_10_4_MGMT_TX_CMDID, 1550 WMI_10_4_PRB_TMPL_CMDID, 1551 WMI_10_4_ADDBA_CLEAR_RESP_CMDID, 1552 WMI_10_4_ADDBA_SEND_CMDID, 1553 WMI_10_4_ADDBA_STATUS_CMDID, 1554 WMI_10_4_DELBA_SEND_CMDID, 1555 WMI_10_4_ADDBA_SET_RESP_CMDID, 1556 WMI_10_4_SEND_SINGLEAMSDU_CMDID, 1557 WMI_10_4_STA_POWERSAVE_MODE_CMDID, 1558 WMI_10_4_STA_POWERSAVE_PARAM_CMDID, 1559 WMI_10_4_STA_MIMO_PS_MODE_CMDID, 1560 WMI_10_4_DBGLOG_CFG_CMDID, 1561 WMI_10_4_PDEV_DFS_ENABLE_CMDID, 1562 WMI_10_4_PDEV_DFS_DISABLE_CMDID, 1563 WMI_10_4_PDEV_QVIT_CMDID, 1564 WMI_10_4_ROAM_SCAN_MODE, 1565 WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD, 1566 WMI_10_4_ROAM_SCAN_PERIOD, 1567 WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1568 WMI_10_4_ROAM_AP_PROFILE, 1569 WMI_10_4_OFL_SCAN_ADD_AP_PROFILE, 1570 WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE, 1571 WMI_10_4_OFL_SCAN_PERIOD, 1572 WMI_10_4_P2P_DEV_SET_DEVICE_INFO, 1573 WMI_10_4_P2P_DEV_SET_DISCOVERABILITY, 1574 WMI_10_4_P2P_GO_SET_BEACON_IE, 1575 WMI_10_4_P2P_GO_SET_PROBE_RESP_IE, 1576 WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID, 1577 WMI_10_4_AP_PS_PEER_PARAM_CMDID, 1578 WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID, 1579 WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID, 1580 WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID, 1581 WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1582 WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1583 WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1584 WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1585 WMI_10_4_PDEV_SUSPEND_CMDID, 1586 WMI_10_4_PDEV_RESUME_CMDID, 1587 WMI_10_4_ADD_BCN_FILTER_CMDID, 1588 WMI_10_4_RMV_BCN_FILTER_CMDID, 1589 WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID, 1590 WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID, 1591 WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1592 WMI_10_4_WOW_ENABLE_CMDID, 1593 WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1594 WMI_10_4_RTT_MEASREQ_CMDID, 1595 WMI_10_4_RTT_TSF_CMDID, 1596 WMI_10_4_RTT_KEEPALIVE_CMDID, 1597 WMI_10_4_OEM_REQ_CMDID, 1598 WMI_10_4_NAN_CMDID, 1599 WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1600 WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1601 WMI_10_4_REQUEST_STATS_CMDID, 1602 WMI_10_4_GPIO_CONFIG_CMDID, 1603 WMI_10_4_GPIO_OUTPUT_CMDID, 1604 WMI_10_4_VDEV_RATEMASK_CMDID, 1605 WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID, 1606 WMI_10_4_GTK_OFFLOAD_CMDID, 1607 WMI_10_4_QBOOST_CFG_CMDID, 1608 WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID, 1609 WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID, 1610 WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1611 WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1612 WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1613 WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1614 WMI_10_4_VDEV_SET_KEEPALIVE_CMDID, 1615 WMI_10_4_VDEV_GET_KEEPALIVE_CMDID, 1616 WMI_10_4_FORCE_FW_HANG_CMDID, 1617 WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1618 WMI_10_4_PDEV_SET_CTL_TABLE_CMDID, 1619 WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1620 WMI_10_4_PDEV_RATEPWR_TABLE_CMDID, 1621 WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1622 WMI_10_4_PDEV_FIPS_CMDID, 1623 WMI_10_4_TT_SET_CONF_CMDID, 1624 WMI_10_4_FWTEST_CMDID, 1625 WMI_10_4_VDEV_ATF_REQUEST_CMDID, 1626 WMI_10_4_PEER_ATF_REQUEST_CMDID, 1627 WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID, 1628 WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID, 1629 WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID, 1630 WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID, 1631 WMI_10_4_PDEV_GET_TPC_CMDID, 1632 WMI_10_4_PDEV_GET_AST_INFO_CMDID, 1633 WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID, 1634 WMI_10_4_PDEV_GET_TEMPERATURE_CMDID, 1635 WMI_10_4_PDEV_GET_INFO_CMDID, 1636 WMI_10_4_VDEV_GET_INFO_CMDID, 1637 WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID, 1638 WMI_10_4_MU_CAL_START_CMDID, 1639 WMI_10_4_SET_CCA_PARAMS_CMDID, 1640 WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1641 WMI_10_4_EXT_RESOURCE_CFG_CMDID, 1642 WMI_10_4_VDEV_SET_IE_CMDID, 1643 WMI_10_4_SET_LTEU_CONFIG_CMDID, 1644 WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1, 1645 }; 1646 1647 enum wmi_10_4_event_id { 1648 WMI_10_4_SERVICE_READY_EVENTID = 0x8000, 1649 WMI_10_4_READY_EVENTID, 1650 WMI_10_4_DEBUG_MESG_EVENTID, 1651 WMI_10_4_START_EVENTID = 0x9000, 1652 WMI_10_4_END_EVENTID = 0x9FFF, 1653 WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID, 1654 WMI_10_4_ECHO_EVENTID, 1655 WMI_10_4_UPDATE_STATS_EVENTID, 1656 WMI_10_4_INST_RSSI_STATS_EVENTID, 1657 WMI_10_4_VDEV_START_RESP_EVENTID, 1658 WMI_10_4_VDEV_STANDBY_REQ_EVENTID, 1659 WMI_10_4_VDEV_RESUME_REQ_EVENTID, 1660 WMI_10_4_VDEV_STOPPED_EVENTID, 1661 WMI_10_4_PEER_STA_KICKOUT_EVENTID, 1662 WMI_10_4_HOST_SWBA_EVENTID, 1663 WMI_10_4_TBTTOFFSET_UPDATE_EVENTID, 1664 WMI_10_4_MGMT_RX_EVENTID, 1665 WMI_10_4_CHAN_INFO_EVENTID, 1666 WMI_10_4_PHYERR_EVENTID, 1667 WMI_10_4_ROAM_EVENTID, 1668 WMI_10_4_PROFILE_MATCH, 1669 WMI_10_4_DEBUG_PRINT_EVENTID, 1670 WMI_10_4_PDEV_QVIT_EVENTID, 1671 WMI_10_4_WLAN_PROFILE_DATA_EVENTID, 1672 WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID, 1673 WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID, 1674 WMI_10_4_RTT_ERROR_REPORT_EVENTID, 1675 WMI_10_4_RTT_KEEPALIVE_EVENTID, 1676 WMI_10_4_OEM_CAPABILITY_EVENTID, 1677 WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID, 1678 WMI_10_4_OEM_ERROR_REPORT_EVENTID, 1679 WMI_10_4_NAN_EVENTID, 1680 WMI_10_4_WOW_WAKEUP_HOST_EVENTID, 1681 WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID, 1682 WMI_10_4_GTK_REKEY_FAIL_EVENTID, 1683 WMI_10_4_DCS_INTERFERENCE_EVENTID, 1684 WMI_10_4_PDEV_TPC_CONFIG_EVENTID, 1685 WMI_10_4_CSA_HANDLING_EVENTID, 1686 WMI_10_4_GPIO_INPUT_EVENTID, 1687 WMI_10_4_PEER_RATECODE_LIST_EVENTID, 1688 WMI_10_4_GENERIC_BUFFER_EVENTID, 1689 WMI_10_4_MCAST_BUF_RELEASE_EVENTID, 1690 WMI_10_4_MCAST_LIST_AGEOUT_EVENTID, 1691 WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID, 1692 WMI_10_4_WDS_PEER_EVENTID, 1693 WMI_10_4_PEER_STA_PS_STATECHG_EVENTID, 1694 WMI_10_4_PDEV_FIPS_EVENTID, 1695 WMI_10_4_TT_STATS_EVENTID, 1696 WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID, 1697 WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID, 1698 WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID, 1699 WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID, 1700 WMI_10_4_PDEV_NFCAL_POWER_EVENTID, 1701 WMI_10_4_PDEV_TPC_EVENTID, 1702 WMI_10_4_PDEV_GET_AST_INFO_EVENTID, 1703 WMI_10_4_PDEV_TEMPERATURE_EVENTID, 1704 WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID, 1705 WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID, 1706 WMI_10_4_MU_REPORT_EVENTID, 1707 WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1, 1708 }; 1709 1710 enum wmi_phy_mode { 1711 MODE_11A = 0, /* 11a Mode */ 1712 MODE_11G = 1, /* 11b/g Mode */ 1713 MODE_11B = 2, /* 11b Mode */ 1714 MODE_11GONLY = 3, /* 11g only Mode */ 1715 MODE_11NA_HT20 = 4, /* 11a HT20 mode */ 1716 MODE_11NG_HT20 = 5, /* 11g HT20 mode */ 1717 MODE_11NA_HT40 = 6, /* 11a HT40 mode */ 1718 MODE_11NG_HT40 = 7, /* 11g HT40 mode */ 1719 MODE_11AC_VHT20 = 8, 1720 MODE_11AC_VHT40 = 9, 1721 MODE_11AC_VHT80 = 10, 1722 /* MODE_11AC_VHT160 = 11, */ 1723 MODE_11AC_VHT20_2G = 11, 1724 MODE_11AC_VHT40_2G = 12, 1725 MODE_11AC_VHT80_2G = 13, 1726 MODE_UNKNOWN = 14, 1727 MODE_MAX = 14 1728 }; 1729 1730 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode) 1731 { 1732 switch (mode) { 1733 case MODE_11A: 1734 return "11a"; 1735 case MODE_11G: 1736 return "11g"; 1737 case MODE_11B: 1738 return "11b"; 1739 case MODE_11GONLY: 1740 return "11gonly"; 1741 case MODE_11NA_HT20: 1742 return "11na-ht20"; 1743 case MODE_11NG_HT20: 1744 return "11ng-ht20"; 1745 case MODE_11NA_HT40: 1746 return "11na-ht40"; 1747 case MODE_11NG_HT40: 1748 return "11ng-ht40"; 1749 case MODE_11AC_VHT20: 1750 return "11ac-vht20"; 1751 case MODE_11AC_VHT40: 1752 return "11ac-vht40"; 1753 case MODE_11AC_VHT80: 1754 return "11ac-vht80"; 1755 case MODE_11AC_VHT20_2G: 1756 return "11ac-vht20-2g"; 1757 case MODE_11AC_VHT40_2G: 1758 return "11ac-vht40-2g"; 1759 case MODE_11AC_VHT80_2G: 1760 return "11ac-vht80-2g"; 1761 case MODE_UNKNOWN: 1762 /* skip */ 1763 break; 1764 1765 /* no default handler to allow compiler to check that the 1766 * enum is fully handled */ 1767 }; 1768 1769 return "<unknown>"; 1770 } 1771 1772 #define WMI_CHAN_LIST_TAG 0x1 1773 #define WMI_SSID_LIST_TAG 0x2 1774 #define WMI_BSSID_LIST_TAG 0x3 1775 #define WMI_IE_TAG 0x4 1776 1777 struct wmi_channel { 1778 __le32 mhz; 1779 __le32 band_center_freq1; 1780 __le32 band_center_freq2; /* valid for 11ac, 80plus80 */ 1781 union { 1782 __le32 flags; /* WMI_CHAN_FLAG_ */ 1783 struct { 1784 u8 mode; /* only 6 LSBs */ 1785 } __packed; 1786 } __packed; 1787 union { 1788 __le32 reginfo0; 1789 struct { 1790 /* note: power unit is 0.5 dBm */ 1791 u8 min_power; 1792 u8 max_power; 1793 u8 reg_power; 1794 u8 reg_classid; 1795 } __packed; 1796 } __packed; 1797 union { 1798 __le32 reginfo1; 1799 struct { 1800 u8 antenna_max; 1801 u8 max_tx_power; 1802 } __packed; 1803 } __packed; 1804 } __packed; 1805 1806 struct wmi_channel_arg { 1807 u32 freq; 1808 u32 band_center_freq1; 1809 bool passive; 1810 bool allow_ibss; 1811 bool allow_ht; 1812 bool allow_vht; 1813 bool ht40plus; 1814 bool chan_radar; 1815 /* note: power unit is 0.5 dBm */ 1816 u32 min_power; 1817 u32 max_power; 1818 u32 max_reg_power; 1819 u32 max_antenna_gain; 1820 u32 reg_class_id; 1821 enum wmi_phy_mode mode; 1822 }; 1823 1824 enum wmi_channel_change_cause { 1825 WMI_CHANNEL_CHANGE_CAUSE_NONE = 0, 1826 WMI_CHANNEL_CHANGE_CAUSE_CSA, 1827 }; 1828 1829 #define WMI_CHAN_FLAG_HT40_PLUS (1 << 6) 1830 #define WMI_CHAN_FLAG_PASSIVE (1 << 7) 1831 #define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8) 1832 #define WMI_CHAN_FLAG_AP_DISABLED (1 << 9) 1833 #define WMI_CHAN_FLAG_DFS (1 << 10) 1834 #define WMI_CHAN_FLAG_ALLOW_HT (1 << 11) 1835 #define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12) 1836 1837 /* Indicate reason for channel switch */ 1838 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13) 1839 1840 #define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */ 1841 1842 /* HT Capabilities*/ 1843 #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ 1844 #define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */ 1845 #define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ 1846 #define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ 1847 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3 1848 #define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ 1849 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4 1850 #define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */ 1851 #define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ 1852 #define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ 1853 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 1854 #define WMI_HT_CAP_HT40_SGI 0x0800 1855 1856 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \ 1857 WMI_HT_CAP_HT20_SGI | \ 1858 WMI_HT_CAP_HT40_SGI | \ 1859 WMI_HT_CAP_TX_STBC | \ 1860 WMI_HT_CAP_RX_STBC | \ 1861 WMI_HT_CAP_LDPC) 1862 1863 /* 1864 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information 1865 * field. The fields not defined here are not supported, or reserved. 1866 * Do not change these masks and if you have to add new one follow the 1867 * bitmask as specified by 802.11ac draft. 1868 */ 1869 1870 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 1871 #define WMI_VHT_CAP_RX_LDPC 0x00000010 1872 #define WMI_VHT_CAP_SGI_80MHZ 0x00000020 1873 #define WMI_VHT_CAP_TX_STBC 0x00000080 1874 #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300 1875 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8 1876 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 1877 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23 1878 #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000 1879 #define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000 1880 1881 /* The following also refer for max HT AMSDU */ 1882 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000 1883 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001 1884 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 1885 1886 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \ 1887 WMI_VHT_CAP_RX_LDPC | \ 1888 WMI_VHT_CAP_SGI_80MHZ | \ 1889 WMI_VHT_CAP_TX_STBC | \ 1890 WMI_VHT_CAP_RX_STBC_MASK | \ 1891 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \ 1892 WMI_VHT_CAP_RX_FIXED_ANT | \ 1893 WMI_VHT_CAP_TX_FIXED_ANT) 1894 1895 /* 1896 * Interested readers refer to Rx/Tx MCS Map definition as defined in 1897 * 802.11ac 1898 */ 1899 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) 1900 #define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 1901 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 1902 1903 enum { 1904 REGDMN_MODE_11A = 0x00001, /* 11a channels */ 1905 REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */ 1906 REGDMN_MODE_11B = 0x00004, /* 11b channels */ 1907 REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */ 1908 REGDMN_MODE_11G = 0x00008, /* XXX historical */ 1909 REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */ 1910 REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */ 1911 REGDMN_MODE_XR = 0x00100, /* XR channels */ 1912 REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */ 1913 REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */ 1914 REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */ 1915 REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */ 1916 REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */ 1917 REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */ 1918 REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */ 1919 REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */ 1920 REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */ 1921 REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */ 1922 REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */ 1923 REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */ 1924 REGDMN_MODE_ALL = 0xffffffff 1925 }; 1926 1927 #define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001 1928 #define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002 1929 #define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004 1930 1931 /* regulatory capabilities */ 1932 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040 1933 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080 1934 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100 1935 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200 1936 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400 1937 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800 1938 1939 struct hal_reg_capabilities { 1940 /* regdomain value specified in EEPROM */ 1941 __le32 eeprom_rd; 1942 /*regdomain */ 1943 __le32 eeprom_rd_ext; 1944 /* CAP1 capabilities bit map. */ 1945 __le32 regcap1; 1946 /* REGDMN EEPROM CAP. */ 1947 __le32 regcap2; 1948 /* REGDMN MODE */ 1949 __le32 wireless_modes; 1950 __le32 low_2ghz_chan; 1951 __le32 high_2ghz_chan; 1952 __le32 low_5ghz_chan; 1953 __le32 high_5ghz_chan; 1954 } __packed; 1955 1956 enum wlan_mode_capability { 1957 WHAL_WLAN_11A_CAPABILITY = 0x1, 1958 WHAL_WLAN_11G_CAPABILITY = 0x2, 1959 WHAL_WLAN_11AG_CAPABILITY = 0x3, 1960 }; 1961 1962 /* structure used by FW for requesting host memory */ 1963 struct wlan_host_mem_req { 1964 /* ID of the request */ 1965 __le32 req_id; 1966 /* size of the of each unit */ 1967 __le32 unit_size; 1968 /* flags to indicate that 1969 * the number units is dependent 1970 * on number of resources(num vdevs num peers .. etc) 1971 */ 1972 __le32 num_unit_info; 1973 /* 1974 * actual number of units to allocate . if flags in the num_unit_info 1975 * indicate that number of units is tied to number of a particular 1976 * resource to allocate then num_units filed is set to 0 and host 1977 * will derive the number units from number of the resources it is 1978 * requesting. 1979 */ 1980 __le32 num_units; 1981 } __packed; 1982 1983 /* 1984 * The following struct holds optional payload for 1985 * wmi_service_ready_event,e.g., 11ac pass some of the 1986 * device capability to the host. 1987 */ 1988 struct wmi_service_ready_event { 1989 __le32 sw_version; 1990 __le32 sw_version_1; 1991 __le32 abi_version; 1992 /* WMI_PHY_CAPABILITY */ 1993 __le32 phy_capability; 1994 /* Maximum number of frag table entries that SW will populate less 1 */ 1995 __le32 max_frag_entry; 1996 __le32 wmi_service_bitmap[16]; 1997 __le32 num_rf_chains; 1998 /* 1999 * The following field is only valid for service type 2000 * WMI_SERVICE_11AC 2001 */ 2002 __le32 ht_cap_info; /* WMI HT Capability */ 2003 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2004 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2005 __le32 hw_min_tx_power; 2006 __le32 hw_max_tx_power; 2007 struct hal_reg_capabilities hal_reg_capabilities; 2008 __le32 sys_cap_info; 2009 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2010 /* 2011 * Max beacon and Probe Response IE offload size 2012 * (includes optional P2P IEs) 2013 */ 2014 __le32 max_bcn_ie_size; 2015 /* 2016 * request to host to allocate a chuck of memory and pss it down to FW 2017 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2018 * data structures. Only valid for low latency interfaces like PCIE 2019 * where FW can access this memory directly (or) by DMA. 2020 */ 2021 __le32 num_mem_reqs; 2022 struct wlan_host_mem_req mem_reqs[0]; 2023 } __packed; 2024 2025 /* This is the definition from 10.X firmware branch */ 2026 struct wmi_10x_service_ready_event { 2027 __le32 sw_version; 2028 __le32 abi_version; 2029 2030 /* WMI_PHY_CAPABILITY */ 2031 __le32 phy_capability; 2032 2033 /* Maximum number of frag table entries that SW will populate less 1 */ 2034 __le32 max_frag_entry; 2035 __le32 wmi_service_bitmap[16]; 2036 __le32 num_rf_chains; 2037 2038 /* 2039 * The following field is only valid for service type 2040 * WMI_SERVICE_11AC 2041 */ 2042 __le32 ht_cap_info; /* WMI HT Capability */ 2043 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2044 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2045 __le32 hw_min_tx_power; 2046 __le32 hw_max_tx_power; 2047 2048 struct hal_reg_capabilities hal_reg_capabilities; 2049 2050 __le32 sys_cap_info; 2051 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2052 2053 /* 2054 * request to host to allocate a chuck of memory and pss it down to FW 2055 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2056 * data structures. Only valid for low latency interfaces like PCIE 2057 * where FW can access this memory directly (or) by DMA. 2058 */ 2059 __le32 num_mem_reqs; 2060 2061 struct wlan_host_mem_req mem_reqs[0]; 2062 } __packed; 2063 2064 #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ) 2065 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ) 2066 2067 struct wmi_ready_event { 2068 __le32 sw_version; 2069 __le32 abi_version; 2070 struct wmi_mac_addr mac_addr; 2071 __le32 status; 2072 } __packed; 2073 2074 struct wmi_resource_config { 2075 /* number of virtual devices (VAPs) to support */ 2076 __le32 num_vdevs; 2077 2078 /* number of peer nodes to support */ 2079 __le32 num_peers; 2080 2081 /* 2082 * In offload mode target supports features like WOW, chatter and 2083 * other protocol offloads. In order to support them some 2084 * functionalities like reorder buffering, PN checking need to be 2085 * done in target. This determines maximum number of peers suported 2086 * by target in offload mode 2087 */ 2088 __le32 num_offload_peers; 2089 2090 /* For target-based RX reordering */ 2091 __le32 num_offload_reorder_bufs; 2092 2093 /* number of keys per peer */ 2094 __le32 num_peer_keys; 2095 2096 /* total number of TX/RX data TIDs */ 2097 __le32 num_tids; 2098 2099 /* 2100 * max skid for resolving hash collisions 2101 * 2102 * The address search table is sparse, so that if two MAC addresses 2103 * result in the same hash value, the second of these conflicting 2104 * entries can slide to the next index in the address search table, 2105 * and use it, if it is unoccupied. This ast_skid_limit parameter 2106 * specifies the upper bound on how many subsequent indices to search 2107 * over to find an unoccupied space. 2108 */ 2109 __le32 ast_skid_limit; 2110 2111 /* 2112 * the nominal chain mask for transmit 2113 * 2114 * The chain mask may be modified dynamically, e.g. to operate AP 2115 * tx with a reduced number of chains if no clients are associated. 2116 * This configuration parameter specifies the nominal chain-mask that 2117 * should be used when not operating with a reduced set of tx chains. 2118 */ 2119 __le32 tx_chain_mask; 2120 2121 /* 2122 * the nominal chain mask for receive 2123 * 2124 * The chain mask may be modified dynamically, e.g. for a client 2125 * to use a reduced number of chains for receive if the traffic to 2126 * the client is low enough that it doesn't require downlink MIMO 2127 * or antenna diversity. 2128 * This configuration parameter specifies the nominal chain-mask that 2129 * should be used when not operating with a reduced set of rx chains. 2130 */ 2131 __le32 rx_chain_mask; 2132 2133 /* 2134 * what rx reorder timeout (ms) to use for the AC 2135 * 2136 * Each WMM access class (voice, video, best-effort, background) will 2137 * have its own timeout value to dictate how long to wait for missing 2138 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2139 * already been received. 2140 * This parameter specifies the timeout in milliseconds for each 2141 * class. 2142 */ 2143 __le32 rx_timeout_pri_vi; 2144 __le32 rx_timeout_pri_vo; 2145 __le32 rx_timeout_pri_be; 2146 __le32 rx_timeout_pri_bk; 2147 2148 /* 2149 * what mode the rx should decap packets to 2150 * 2151 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2152 * THis setting also determines the default TX behavior, however TX 2153 * behavior can be modified on a per VAP basis during VAP init 2154 */ 2155 __le32 rx_decap_mode; 2156 2157 /* what is the maximum number of scan requests that can be queued */ 2158 __le32 scan_max_pending_reqs; 2159 2160 /* maximum VDEV that could use BMISS offload */ 2161 __le32 bmiss_offload_max_vdev; 2162 2163 /* maximum VDEV that could use offload roaming */ 2164 __le32 roam_offload_max_vdev; 2165 2166 /* maximum AP profiles that would push to offload roaming */ 2167 __le32 roam_offload_max_ap_profiles; 2168 2169 /* 2170 * how many groups to use for mcast->ucast conversion 2171 * 2172 * The target's WAL maintains a table to hold information regarding 2173 * which peers belong to a given multicast group, so that if 2174 * multicast->unicast conversion is enabled, the target can convert 2175 * multicast tx frames to a series of unicast tx frames, to each 2176 * peer within the multicast group. 2177 This num_mcast_groups configuration parameter tells the target how 2178 * many multicast groups to provide storage for within its multicast 2179 * group membership table. 2180 */ 2181 __le32 num_mcast_groups; 2182 2183 /* 2184 * size to alloc for the mcast membership table 2185 * 2186 * This num_mcast_table_elems configuration parameter tells the 2187 * target how many peer elements it needs to provide storage for in 2188 * its multicast group membership table. 2189 * These multicast group membership table elements are shared by the 2190 * multicast groups stored within the table. 2191 */ 2192 __le32 num_mcast_table_elems; 2193 2194 /* 2195 * whether/how to do multicast->unicast conversion 2196 * 2197 * This configuration parameter specifies whether the target should 2198 * perform multicast --> unicast conversion on transmit, and if so, 2199 * what to do if it finds no entries in its multicast group 2200 * membership table for the multicast IP address in the tx frame. 2201 * Configuration value: 2202 * 0 -> Do not perform multicast to unicast conversion. 2203 * 1 -> Convert multicast frames to unicast, if the IP multicast 2204 * address from the tx frame is found in the multicast group 2205 * membership table. If the IP multicast address is not found, 2206 * drop the frame. 2207 * 2 -> Convert multicast frames to unicast, if the IP multicast 2208 * address from the tx frame is found in the multicast group 2209 * membership table. If the IP multicast address is not found, 2210 * transmit the frame as multicast. 2211 */ 2212 __le32 mcast2ucast_mode; 2213 2214 /* 2215 * how much memory to allocate for a tx PPDU dbg log 2216 * 2217 * This parameter controls how much memory the target will allocate 2218 * to store a log of tx PPDU meta-information (how large the PPDU 2219 * was, when it was sent, whether it was successful, etc.) 2220 */ 2221 __le32 tx_dbg_log_size; 2222 2223 /* how many AST entries to be allocated for WDS */ 2224 __le32 num_wds_entries; 2225 2226 /* 2227 * MAC DMA burst size, e.g., For target PCI limit can be 2228 * 0 -default, 1 256B 2229 */ 2230 __le32 dma_burst_size; 2231 2232 /* 2233 * Fixed delimiters to be inserted after every MPDU to 2234 * account for interface latency to avoid underrun. 2235 */ 2236 __le32 mac_aggr_delim; 2237 2238 /* 2239 * determine whether target is responsible for detecting duplicate 2240 * non-aggregate MPDU and timing out stale fragments. 2241 * 2242 * A-MPDU reordering is always performed on the target. 2243 * 2244 * 0: target responsible for frag timeout and dup checking 2245 * 1: host responsible for frag timeout and dup checking 2246 */ 2247 __le32 rx_skip_defrag_timeout_dup_detection_check; 2248 2249 /* 2250 * Configuration for VoW : 2251 * No of Video Nodes to be supported 2252 * and Max no of descriptors for each Video link (node). 2253 */ 2254 __le32 vow_config; 2255 2256 /* maximum VDEV that could use GTK offload */ 2257 __le32 gtk_offload_max_vdev; 2258 2259 /* Number of msdu descriptors target should use */ 2260 __le32 num_msdu_desc; 2261 2262 /* 2263 * Max. number of Tx fragments per MSDU 2264 * This parameter controls the max number of Tx fragments per MSDU. 2265 * This is sent by the target as part of the WMI_SERVICE_READY event 2266 * and is overriden by the OS shim as required. 2267 */ 2268 __le32 max_frag_entries; 2269 } __packed; 2270 2271 struct wmi_resource_config_10x { 2272 /* number of virtual devices (VAPs) to support */ 2273 __le32 num_vdevs; 2274 2275 /* number of peer nodes to support */ 2276 __le32 num_peers; 2277 2278 /* number of keys per peer */ 2279 __le32 num_peer_keys; 2280 2281 /* total number of TX/RX data TIDs */ 2282 __le32 num_tids; 2283 2284 /* 2285 * max skid for resolving hash collisions 2286 * 2287 * The address search table is sparse, so that if two MAC addresses 2288 * result in the same hash value, the second of these conflicting 2289 * entries can slide to the next index in the address search table, 2290 * and use it, if it is unoccupied. This ast_skid_limit parameter 2291 * specifies the upper bound on how many subsequent indices to search 2292 * over to find an unoccupied space. 2293 */ 2294 __le32 ast_skid_limit; 2295 2296 /* 2297 * the nominal chain mask for transmit 2298 * 2299 * The chain mask may be modified dynamically, e.g. to operate AP 2300 * tx with a reduced number of chains if no clients are associated. 2301 * This configuration parameter specifies the nominal chain-mask that 2302 * should be used when not operating with a reduced set of tx chains. 2303 */ 2304 __le32 tx_chain_mask; 2305 2306 /* 2307 * the nominal chain mask for receive 2308 * 2309 * The chain mask may be modified dynamically, e.g. for a client 2310 * to use a reduced number of chains for receive if the traffic to 2311 * the client is low enough that it doesn't require downlink MIMO 2312 * or antenna diversity. 2313 * This configuration parameter specifies the nominal chain-mask that 2314 * should be used when not operating with a reduced set of rx chains. 2315 */ 2316 __le32 rx_chain_mask; 2317 2318 /* 2319 * what rx reorder timeout (ms) to use for the AC 2320 * 2321 * Each WMM access class (voice, video, best-effort, background) will 2322 * have its own timeout value to dictate how long to wait for missing 2323 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2324 * already been received. 2325 * This parameter specifies the timeout in milliseconds for each 2326 * class. 2327 */ 2328 __le32 rx_timeout_pri_vi; 2329 __le32 rx_timeout_pri_vo; 2330 __le32 rx_timeout_pri_be; 2331 __le32 rx_timeout_pri_bk; 2332 2333 /* 2334 * what mode the rx should decap packets to 2335 * 2336 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2337 * THis setting also determines the default TX behavior, however TX 2338 * behavior can be modified on a per VAP basis during VAP init 2339 */ 2340 __le32 rx_decap_mode; 2341 2342 /* what is the maximum number of scan requests that can be queued */ 2343 __le32 scan_max_pending_reqs; 2344 2345 /* maximum VDEV that could use BMISS offload */ 2346 __le32 bmiss_offload_max_vdev; 2347 2348 /* maximum VDEV that could use offload roaming */ 2349 __le32 roam_offload_max_vdev; 2350 2351 /* maximum AP profiles that would push to offload roaming */ 2352 __le32 roam_offload_max_ap_profiles; 2353 2354 /* 2355 * how many groups to use for mcast->ucast conversion 2356 * 2357 * The target's WAL maintains a table to hold information regarding 2358 * which peers belong to a given multicast group, so that if 2359 * multicast->unicast conversion is enabled, the target can convert 2360 * multicast tx frames to a series of unicast tx frames, to each 2361 * peer within the multicast group. 2362 This num_mcast_groups configuration parameter tells the target how 2363 * many multicast groups to provide storage for within its multicast 2364 * group membership table. 2365 */ 2366 __le32 num_mcast_groups; 2367 2368 /* 2369 * size to alloc for the mcast membership table 2370 * 2371 * This num_mcast_table_elems configuration parameter tells the 2372 * target how many peer elements it needs to provide storage for in 2373 * its multicast group membership table. 2374 * These multicast group membership table elements are shared by the 2375 * multicast groups stored within the table. 2376 */ 2377 __le32 num_mcast_table_elems; 2378 2379 /* 2380 * whether/how to do multicast->unicast conversion 2381 * 2382 * This configuration parameter specifies whether the target should 2383 * perform multicast --> unicast conversion on transmit, and if so, 2384 * what to do if it finds no entries in its multicast group 2385 * membership table for the multicast IP address in the tx frame. 2386 * Configuration value: 2387 * 0 -> Do not perform multicast to unicast conversion. 2388 * 1 -> Convert multicast frames to unicast, if the IP multicast 2389 * address from the tx frame is found in the multicast group 2390 * membership table. If the IP multicast address is not found, 2391 * drop the frame. 2392 * 2 -> Convert multicast frames to unicast, if the IP multicast 2393 * address from the tx frame is found in the multicast group 2394 * membership table. If the IP multicast address is not found, 2395 * transmit the frame as multicast. 2396 */ 2397 __le32 mcast2ucast_mode; 2398 2399 /* 2400 * how much memory to allocate for a tx PPDU dbg log 2401 * 2402 * This parameter controls how much memory the target will allocate 2403 * to store a log of tx PPDU meta-information (how large the PPDU 2404 * was, when it was sent, whether it was successful, etc.) 2405 */ 2406 __le32 tx_dbg_log_size; 2407 2408 /* how many AST entries to be allocated for WDS */ 2409 __le32 num_wds_entries; 2410 2411 /* 2412 * MAC DMA burst size, e.g., For target PCI limit can be 2413 * 0 -default, 1 256B 2414 */ 2415 __le32 dma_burst_size; 2416 2417 /* 2418 * Fixed delimiters to be inserted after every MPDU to 2419 * account for interface latency to avoid underrun. 2420 */ 2421 __le32 mac_aggr_delim; 2422 2423 /* 2424 * determine whether target is responsible for detecting duplicate 2425 * non-aggregate MPDU and timing out stale fragments. 2426 * 2427 * A-MPDU reordering is always performed on the target. 2428 * 2429 * 0: target responsible for frag timeout and dup checking 2430 * 1: host responsible for frag timeout and dup checking 2431 */ 2432 __le32 rx_skip_defrag_timeout_dup_detection_check; 2433 2434 /* 2435 * Configuration for VoW : 2436 * No of Video Nodes to be supported 2437 * and Max no of descriptors for each Video link (node). 2438 */ 2439 __le32 vow_config; 2440 2441 /* Number of msdu descriptors target should use */ 2442 __le32 num_msdu_desc; 2443 2444 /* 2445 * Max. number of Tx fragments per MSDU 2446 * This parameter controls the max number of Tx fragments per MSDU. 2447 * This is sent by the target as part of the WMI_SERVICE_READY event 2448 * and is overriden by the OS shim as required. 2449 */ 2450 __le32 max_frag_entries; 2451 } __packed; 2452 2453 enum wmi_10_2_feature_mask { 2454 WMI_10_2_RX_BATCH_MODE = BIT(0), 2455 WMI_10_2_ATF_CONFIG = BIT(1), 2456 WMI_10_2_COEX_GPIO = BIT(3), 2457 WMI_10_2_BSS_CHAN_INFO = BIT(6), 2458 WMI_10_2_PEER_STATS = BIT(7), 2459 }; 2460 2461 struct wmi_resource_config_10_2 { 2462 struct wmi_resource_config_10x common; 2463 __le32 max_peer_ext_stats; 2464 __le32 smart_ant_cap; /* 0-disable, 1-enable */ 2465 __le32 bk_min_free; 2466 __le32 be_min_free; 2467 __le32 vi_min_free; 2468 __le32 vo_min_free; 2469 __le32 feature_mask; 2470 } __packed; 2471 2472 #define NUM_UNITS_IS_NUM_VDEVS BIT(0) 2473 #define NUM_UNITS_IS_NUM_PEERS BIT(1) 2474 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2) 2475 2476 struct wmi_resource_config_10_4 { 2477 /* Number of virtual devices (VAPs) to support */ 2478 __le32 num_vdevs; 2479 2480 /* Number of peer nodes to support */ 2481 __le32 num_peers; 2482 2483 /* Number of active peer nodes to support */ 2484 __le32 num_active_peers; 2485 2486 /* In offload mode, target supports features like WOW, chatter and other 2487 * protocol offloads. In order to support them some functionalities like 2488 * reorder buffering, PN checking need to be done in target. 2489 * This determines maximum number of peers supported by target in 2490 * offload mode. 2491 */ 2492 __le32 num_offload_peers; 2493 2494 /* Number of reorder buffers available for doing target based reorder 2495 * Rx reorder buffering 2496 */ 2497 __le32 num_offload_reorder_buffs; 2498 2499 /* Number of keys per peer */ 2500 __le32 num_peer_keys; 2501 2502 /* Total number of TX/RX data TIDs */ 2503 __le32 num_tids; 2504 2505 /* Max skid for resolving hash collisions. 2506 * The address search table is sparse, so that if two MAC addresses 2507 * result in the same hash value, the second of these conflicting 2508 * entries can slide to the next index in the address search table, 2509 * and use it, if it is unoccupied. This ast_skid_limit parameter 2510 * specifies the upper bound on how many subsequent indices to search 2511 * over to find an unoccupied space. 2512 */ 2513 __le32 ast_skid_limit; 2514 2515 /* The nominal chain mask for transmit. 2516 * The chain mask may be modified dynamically, e.g. to operate AP tx 2517 * with a reduced number of chains if no clients are associated. 2518 * This configuration parameter specifies the nominal chain-mask that 2519 * should be used when not operating with a reduced set of tx chains. 2520 */ 2521 __le32 tx_chain_mask; 2522 2523 /* The nominal chain mask for receive. 2524 * The chain mask may be modified dynamically, e.g. for a client to use 2525 * a reduced number of chains for receive if the traffic to the client 2526 * is low enough that it doesn't require downlink MIMO or antenna 2527 * diversity. This configuration parameter specifies the nominal 2528 * chain-mask that should be used when not operating with a reduced 2529 * set of rx chains. 2530 */ 2531 __le32 rx_chain_mask; 2532 2533 /* What rx reorder timeout (ms) to use for the AC. 2534 * Each WMM access class (voice, video, best-effort, background) will 2535 * have its own timeout value to dictate how long to wait for missing 2536 * rx MPDUs to arrive before flushing subsequent MPDUs that have already 2537 * been received. This parameter specifies the timeout in milliseconds 2538 * for each class. 2539 */ 2540 __le32 rx_timeout_pri[4]; 2541 2542 /* What mode the rx should decap packets to. 2543 * MAC can decap to RAW (no decap), native wifi or Ethernet types. 2544 * This setting also determines the default TX behavior, however TX 2545 * behavior can be modified on a per VAP basis during VAP init 2546 */ 2547 __le32 rx_decap_mode; 2548 2549 __le32 scan_max_pending_req; 2550 2551 __le32 bmiss_offload_max_vdev; 2552 2553 __le32 roam_offload_max_vdev; 2554 2555 __le32 roam_offload_max_ap_profiles; 2556 2557 /* How many groups to use for mcast->ucast conversion. 2558 * The target's WAL maintains a table to hold information regarding 2559 * which peers belong to a given multicast group, so that if 2560 * multicast->unicast conversion is enabled, the target can convert 2561 * multicast tx frames to a series of unicast tx frames, to each peer 2562 * within the multicast group. This num_mcast_groups configuration 2563 * parameter tells the target how many multicast groups to provide 2564 * storage for within its multicast group membership table. 2565 */ 2566 __le32 num_mcast_groups; 2567 2568 /* Size to alloc for the mcast membership table. 2569 * This num_mcast_table_elems configuration parameter tells the target 2570 * how many peer elements it needs to provide storage for in its 2571 * multicast group membership table. These multicast group membership 2572 * table elements are shared by the multicast groups stored within 2573 * the table. 2574 */ 2575 __le32 num_mcast_table_elems; 2576 2577 /* Whether/how to do multicast->unicast conversion. 2578 * This configuration parameter specifies whether the target should 2579 * perform multicast --> unicast conversion on transmit, and if so, 2580 * what to do if it finds no entries in its multicast group membership 2581 * table for the multicast IP address in the tx frame. 2582 * Configuration value: 2583 * 0 -> Do not perform multicast to unicast conversion. 2584 * 1 -> Convert multicast frames to unicast, if the IP multicast address 2585 * from the tx frame is found in the multicast group membership 2586 * table. If the IP multicast address is not found, drop the frame 2587 * 2 -> Convert multicast frames to unicast, if the IP multicast address 2588 * from the tx frame is found in the multicast group membership 2589 * table. If the IP multicast address is not found, transmit the 2590 * frame as multicast. 2591 */ 2592 __le32 mcast2ucast_mode; 2593 2594 /* How much memory to allocate for a tx PPDU dbg log. 2595 * This parameter controls how much memory the target will allocate to 2596 * store a log of tx PPDU meta-information (how large the PPDU was, 2597 * when it was sent, whether it was successful, etc.) 2598 */ 2599 __le32 tx_dbg_log_size; 2600 2601 /* How many AST entries to be allocated for WDS */ 2602 __le32 num_wds_entries; 2603 2604 /* MAC DMA burst size. 0 -default, 1 -256B */ 2605 __le32 dma_burst_size; 2606 2607 /* Fixed delimiters to be inserted after every MPDU to account for 2608 * interface latency to avoid underrun. 2609 */ 2610 __le32 mac_aggr_delim; 2611 2612 /* Determine whether target is responsible for detecting duplicate 2613 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering 2614 * is always performed on the target. 2615 * 2616 * 0: target responsible for frag timeout and dup checking 2617 * 1: host responsible for frag timeout and dup checking 2618 */ 2619 __le32 rx_skip_defrag_timeout_dup_detection_check; 2620 2621 /* Configuration for VoW : No of Video nodes to be supported and max 2622 * no of descriptors for each video link (node). 2623 */ 2624 __le32 vow_config; 2625 2626 /* Maximum vdev that could use gtk offload */ 2627 __le32 gtk_offload_max_vdev; 2628 2629 /* Number of msdu descriptors target should use */ 2630 __le32 num_msdu_desc; 2631 2632 /* Max number of tx fragments per MSDU. 2633 * This parameter controls the max number of tx fragments per MSDU. 2634 * This will passed by target as part of the WMI_SERVICE_READY event 2635 * and is overridden by the OS shim as required. 2636 */ 2637 __le32 max_frag_entries; 2638 2639 /* Max number of extended peer stats. 2640 * This parameter controls the max number of peers for which extended 2641 * statistics are supported by target 2642 */ 2643 __le32 max_peer_ext_stats; 2644 2645 /* Smart antenna capabilities information. 2646 * 1 - Smart antenna is enabled 2647 * 0 - Smart antenna is disabled 2648 * In future this can contain smart antenna specific capabilities. 2649 */ 2650 __le32 smart_ant_cap; 2651 2652 /* User can configure the buffers allocated for each AC (BE, BK, VI, VO) 2653 * during init. 2654 */ 2655 __le32 bk_minfree; 2656 __le32 be_minfree; 2657 __le32 vi_minfree; 2658 __le32 vo_minfree; 2659 2660 /* Rx batch mode capability. 2661 * 1 - Rx batch mode enabled 2662 * 0 - Rx batch mode disabled 2663 */ 2664 __le32 rx_batchmode; 2665 2666 /* Thermal throttling capability. 2667 * 1 - Capable of thermal throttling 2668 * 0 - Not capable of thermal throttling 2669 */ 2670 __le32 tt_support; 2671 2672 /* ATF configuration. 2673 * 1 - Enable ATF 2674 * 0 - Disable ATF 2675 */ 2676 __le32 atf_config; 2677 2678 /* Configure padding to manage IP header un-alignment 2679 * 1 - Enable padding 2680 * 0 - Disable padding 2681 */ 2682 __le32 iphdr_pad_config; 2683 2684 /* qwrap configuration (bits 15-0) 2685 * 1 - This is qwrap configuration 2686 * 0 - This is not qwrap 2687 * 2688 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables) 2689 * In order to get ack-RSSI reporting and to specify the tx-rate for 2690 * individual frames, this option must be enabled. This uses an extra 2691 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it. 2692 */ 2693 __le32 qwrap_config; 2694 } __packed; 2695 2696 /** 2697 * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags 2698 * @WMI_10_4_LTEU_SUPPORT: LTEU config 2699 * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config 2700 * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan 2701 * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan 2702 * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats 2703 * @WMI_10_4_PEER_STATS: Per station stats 2704 */ 2705 enum wmi_10_4_feature_mask { 2706 WMI_10_4_LTEU_SUPPORT = BIT(0), 2707 WMI_10_4_COEX_GPIO_SUPPORT = BIT(1), 2708 WMI_10_4_AUX_RADIO_SPECTRAL_INTF = BIT(2), 2709 WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF = BIT(3), 2710 WMI_10_4_BSS_CHANNEL_INFO_64 = BIT(4), 2711 WMI_10_4_PEER_STATS = BIT(5), 2712 }; 2713 2714 struct wmi_ext_resource_config_10_4_cmd { 2715 /* contains enum wmi_host_platform_type */ 2716 __le32 host_platform_config; 2717 /* see enum wmi_10_4_feature_mask */ 2718 __le32 fw_feature_bitmap; 2719 }; 2720 2721 /* strucutre describing host memory chunk. */ 2722 struct host_memory_chunk { 2723 /* id of the request that is passed up in service ready */ 2724 __le32 req_id; 2725 /* the physical address the memory chunk */ 2726 __le32 ptr; 2727 /* size of the chunk */ 2728 __le32 size; 2729 } __packed; 2730 2731 struct wmi_host_mem_chunks { 2732 __le32 count; 2733 /* some fw revisions require at least 1 chunk regardless of count */ 2734 struct host_memory_chunk items[1]; 2735 } __packed; 2736 2737 struct wmi_init_cmd { 2738 struct wmi_resource_config resource_config; 2739 struct wmi_host_mem_chunks mem_chunks; 2740 } __packed; 2741 2742 /* _10x stucture is from 10.X FW API */ 2743 struct wmi_init_cmd_10x { 2744 struct wmi_resource_config_10x resource_config; 2745 struct wmi_host_mem_chunks mem_chunks; 2746 } __packed; 2747 2748 struct wmi_init_cmd_10_2 { 2749 struct wmi_resource_config_10_2 resource_config; 2750 struct wmi_host_mem_chunks mem_chunks; 2751 } __packed; 2752 2753 struct wmi_init_cmd_10_4 { 2754 struct wmi_resource_config_10_4 resource_config; 2755 struct wmi_host_mem_chunks mem_chunks; 2756 } __packed; 2757 2758 struct wmi_chan_list_entry { 2759 __le16 freq; 2760 u8 phy_mode; /* valid for 10.2 only */ 2761 u8 reserved; 2762 } __packed; 2763 2764 /* TLV for channel list */ 2765 struct wmi_chan_list { 2766 __le32 tag; /* WMI_CHAN_LIST_TAG */ 2767 __le32 num_chan; 2768 struct wmi_chan_list_entry channel_list[0]; 2769 } __packed; 2770 2771 struct wmi_bssid_list { 2772 __le32 tag; /* WMI_BSSID_LIST_TAG */ 2773 __le32 num_bssid; 2774 struct wmi_mac_addr bssid_list[0]; 2775 } __packed; 2776 2777 struct wmi_ie_data { 2778 __le32 tag; /* WMI_IE_TAG */ 2779 __le32 ie_len; 2780 u8 ie_data[0]; 2781 } __packed; 2782 2783 struct wmi_ssid { 2784 __le32 ssid_len; 2785 u8 ssid[32]; 2786 } __packed; 2787 2788 struct wmi_ssid_list { 2789 __le32 tag; /* WMI_SSID_LIST_TAG */ 2790 __le32 num_ssids; 2791 struct wmi_ssid ssids[0]; 2792 } __packed; 2793 2794 /* prefix used by scan requestor ids on the host */ 2795 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000 2796 2797 /* prefix used by scan request ids generated on the host */ 2798 /* host cycles through the lower 12 bits to generate ids */ 2799 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000 2800 2801 #define WLAN_SCAN_PARAMS_MAX_SSID 16 2802 #define WLAN_SCAN_PARAMS_MAX_BSSID 4 2803 #define WLAN_SCAN_PARAMS_MAX_IE_LEN 256 2804 2805 /* Values lower than this may be refused by some firmware revisions with a scan 2806 * completion with a timedout reason. 2807 */ 2808 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40 2809 2810 /* Scan priority numbers must be sequential, starting with 0 */ 2811 enum wmi_scan_priority { 2812 WMI_SCAN_PRIORITY_VERY_LOW = 0, 2813 WMI_SCAN_PRIORITY_LOW, 2814 WMI_SCAN_PRIORITY_MEDIUM, 2815 WMI_SCAN_PRIORITY_HIGH, 2816 WMI_SCAN_PRIORITY_VERY_HIGH, 2817 WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */ 2818 }; 2819 2820 struct wmi_start_scan_common { 2821 /* Scan ID */ 2822 __le32 scan_id; 2823 /* Scan requestor ID */ 2824 __le32 scan_req_id; 2825 /* VDEV id(interface) that is requesting scan */ 2826 __le32 vdev_id; 2827 /* Scan Priority, input to scan scheduler */ 2828 __le32 scan_priority; 2829 /* Scan events subscription */ 2830 __le32 notify_scan_events; 2831 /* dwell time in msec on active channels */ 2832 __le32 dwell_time_active; 2833 /* dwell time in msec on passive channels */ 2834 __le32 dwell_time_passive; 2835 /* 2836 * min time in msec on the BSS channel,only valid if atleast one 2837 * VDEV is active 2838 */ 2839 __le32 min_rest_time; 2840 /* 2841 * max rest time in msec on the BSS channel,only valid if at least 2842 * one VDEV is active 2843 */ 2844 /* 2845 * the scanner will rest on the bss channel at least min_rest_time 2846 * after min_rest_time the scanner will start checking for tx/rx 2847 * activity on all VDEVs. if there is no activity the scanner will 2848 * switch to off channel. if there is activity the scanner will let 2849 * the radio on the bss channel until max_rest_time expires.at 2850 * max_rest_time scanner will switch to off channel irrespective of 2851 * activity. activity is determined by the idle_time parameter. 2852 */ 2853 __le32 max_rest_time; 2854 /* 2855 * time before sending next set of probe requests. 2856 * The scanner keeps repeating probe requests transmission with 2857 * period specified by repeat_probe_time. 2858 * The number of probe requests specified depends on the ssid_list 2859 * and bssid_list 2860 */ 2861 __le32 repeat_probe_time; 2862 /* time in msec between 2 consequetive probe requests with in a set. */ 2863 __le32 probe_spacing_time; 2864 /* 2865 * data inactivity time in msec on bss channel that will be used by 2866 * scanner for measuring the inactivity. 2867 */ 2868 __le32 idle_time; 2869 /* maximum time in msec allowed for scan */ 2870 __le32 max_scan_time; 2871 /* 2872 * delay in msec before sending first probe request after switching 2873 * to a channel 2874 */ 2875 __le32 probe_delay; 2876 /* Scan control flags */ 2877 __le32 scan_ctrl_flags; 2878 } __packed; 2879 2880 struct wmi_start_scan_tlvs { 2881 /* TLV parameters. These includes channel list, ssid list, bssid list, 2882 * extra ies. 2883 */ 2884 u8 tlvs[0]; 2885 } __packed; 2886 2887 struct wmi_start_scan_cmd { 2888 struct wmi_start_scan_common common; 2889 __le32 burst_duration_ms; 2890 struct wmi_start_scan_tlvs tlvs; 2891 } __packed; 2892 2893 /* This is the definition from 10.X firmware branch */ 2894 struct wmi_10x_start_scan_cmd { 2895 struct wmi_start_scan_common common; 2896 struct wmi_start_scan_tlvs tlvs; 2897 } __packed; 2898 2899 struct wmi_ssid_arg { 2900 int len; 2901 const u8 *ssid; 2902 }; 2903 2904 struct wmi_bssid_arg { 2905 const u8 *bssid; 2906 }; 2907 2908 struct wmi_start_scan_arg { 2909 u32 scan_id; 2910 u32 scan_req_id; 2911 u32 vdev_id; 2912 u32 scan_priority; 2913 u32 notify_scan_events; 2914 u32 dwell_time_active; 2915 u32 dwell_time_passive; 2916 u32 min_rest_time; 2917 u32 max_rest_time; 2918 u32 repeat_probe_time; 2919 u32 probe_spacing_time; 2920 u32 idle_time; 2921 u32 max_scan_time; 2922 u32 probe_delay; 2923 u32 scan_ctrl_flags; 2924 u32 burst_duration_ms; 2925 2926 u32 ie_len; 2927 u32 n_channels; 2928 u32 n_ssids; 2929 u32 n_bssids; 2930 2931 u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN]; 2932 u16 channels[64]; 2933 struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID]; 2934 struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID]; 2935 }; 2936 2937 /* scan control flags */ 2938 2939 /* passively scan all channels including active channels */ 2940 #define WMI_SCAN_FLAG_PASSIVE 0x1 2941 /* add wild card ssid probe request even though ssid_list is specified. */ 2942 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2 2943 /* add cck rates to rates/xrate ie for the generated probe request */ 2944 #define WMI_SCAN_ADD_CCK_RATES 0x4 2945 /* add ofdm rates to rates/xrate ie for the generated probe request */ 2946 #define WMI_SCAN_ADD_OFDM_RATES 0x8 2947 /* To enable indication of Chan load and Noise floor to host */ 2948 #define WMI_SCAN_CHAN_STAT_EVENT 0x10 2949 /* Filter Probe request frames */ 2950 #define WMI_SCAN_FILTER_PROBE_REQ 0x20 2951 /* When set, DFS channels will not be scanned */ 2952 #define WMI_SCAN_BYPASS_DFS_CHN 0x40 2953 /* Different FW scan engine may choose to bail out on errors. 2954 * Allow the driver to have influence over that. */ 2955 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80 2956 2957 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */ 2958 #define WMI_SCAN_CLASS_MASK 0xFF000000 2959 2960 enum wmi_stop_scan_type { 2961 WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */ 2962 WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */ 2963 WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */ 2964 }; 2965 2966 struct wmi_stop_scan_cmd { 2967 __le32 scan_req_id; 2968 __le32 scan_id; 2969 __le32 req_type; 2970 __le32 vdev_id; 2971 } __packed; 2972 2973 struct wmi_stop_scan_arg { 2974 u32 req_id; 2975 enum wmi_stop_scan_type req_type; 2976 union { 2977 u32 scan_id; 2978 u32 vdev_id; 2979 } u; 2980 }; 2981 2982 struct wmi_scan_chan_list_cmd { 2983 __le32 num_scan_chans; 2984 struct wmi_channel chan_info[0]; 2985 } __packed; 2986 2987 struct wmi_scan_chan_list_arg { 2988 u32 n_channels; 2989 struct wmi_channel_arg *channels; 2990 }; 2991 2992 enum wmi_bss_filter { 2993 WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */ 2994 WMI_BSS_FILTER_ALL, /* all beacons forwarded */ 2995 WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */ 2996 WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */ 2997 WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */ 2998 WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */ 2999 WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */ 3000 WMI_BSS_FILTER_LAST_BSS, /* marker only */ 3001 }; 3002 3003 enum wmi_scan_event_type { 3004 WMI_SCAN_EVENT_STARTED = BIT(0), 3005 WMI_SCAN_EVENT_COMPLETED = BIT(1), 3006 WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2), 3007 WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3), 3008 WMI_SCAN_EVENT_DEQUEUED = BIT(4), 3009 /* possibly by high-prio scan */ 3010 WMI_SCAN_EVENT_PREEMPTED = BIT(5), 3011 WMI_SCAN_EVENT_START_FAILED = BIT(6), 3012 WMI_SCAN_EVENT_RESTARTED = BIT(7), 3013 WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8), 3014 WMI_SCAN_EVENT_MAX = BIT(15), 3015 }; 3016 3017 enum wmi_scan_completion_reason { 3018 WMI_SCAN_REASON_COMPLETED, 3019 WMI_SCAN_REASON_CANCELLED, 3020 WMI_SCAN_REASON_PREEMPTED, 3021 WMI_SCAN_REASON_TIMEDOUT, 3022 WMI_SCAN_REASON_INTERNAL_FAILURE, 3023 WMI_SCAN_REASON_MAX, 3024 }; 3025 3026 struct wmi_scan_event { 3027 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 3028 __le32 reason; /* %WMI_SCAN_REASON_ */ 3029 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 3030 __le32 scan_req_id; 3031 __le32 scan_id; 3032 __le32 vdev_id; 3033 } __packed; 3034 3035 /* 3036 * This defines how much headroom is kept in the 3037 * receive frame between the descriptor and the 3038 * payload, in order for the WMI PHY error and 3039 * management handler to insert header contents. 3040 * 3041 * This is in bytes. 3042 */ 3043 #define WMI_MGMT_RX_HDR_HEADROOM 52 3044 3045 /* 3046 * This event will be used for sending scan results 3047 * as well as rx mgmt frames to the host. The rx buffer 3048 * will be sent as part of this WMI event. It would be a 3049 * good idea to pass all the fields in the RX status 3050 * descriptor up to the host. 3051 */ 3052 struct wmi_mgmt_rx_hdr_v1 { 3053 __le32 channel; 3054 __le32 snr; 3055 __le32 rate; 3056 __le32 phy_mode; 3057 __le32 buf_len; 3058 __le32 status; /* %WMI_RX_STATUS_ */ 3059 } __packed; 3060 3061 struct wmi_mgmt_rx_hdr_v2 { 3062 struct wmi_mgmt_rx_hdr_v1 v1; 3063 __le32 rssi_ctl[4]; 3064 } __packed; 3065 3066 struct wmi_mgmt_rx_event_v1 { 3067 struct wmi_mgmt_rx_hdr_v1 hdr; 3068 u8 buf[0]; 3069 } __packed; 3070 3071 struct wmi_mgmt_rx_event_v2 { 3072 struct wmi_mgmt_rx_hdr_v2 hdr; 3073 u8 buf[0]; 3074 } __packed; 3075 3076 struct wmi_10_4_mgmt_rx_hdr { 3077 __le32 channel; 3078 __le32 snr; 3079 u8 rssi_ctl[4]; 3080 __le32 rate; 3081 __le32 phy_mode; 3082 __le32 buf_len; 3083 __le32 status; 3084 } __packed; 3085 3086 struct wmi_10_4_mgmt_rx_event { 3087 struct wmi_10_4_mgmt_rx_hdr hdr; 3088 u8 buf[0]; 3089 } __packed; 3090 3091 struct wmi_mgmt_rx_ext_info { 3092 __le64 rx_mac_timestamp; 3093 } __packed __aligned(4); 3094 3095 #define WMI_RX_STATUS_OK 0x00 3096 #define WMI_RX_STATUS_ERR_CRC 0x01 3097 #define WMI_RX_STATUS_ERR_DECRYPT 0x08 3098 #define WMI_RX_STATUS_ERR_MIC 0x10 3099 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20 3100 /* Extension data at the end of mgmt frame */ 3101 #define WMI_RX_STATUS_EXT_INFO 0x40 3102 3103 #define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26 3104 #define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24 3105 #define PHY_ERROR_GEN_RADAR 0x05 3106 3107 #define PHY_ERROR_10_4_RADAR_MASK 0x4 3108 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000 3109 3110 enum phy_err_type { 3111 PHY_ERROR_UNKNOWN, 3112 PHY_ERROR_SPECTRAL_SCAN, 3113 PHY_ERROR_FALSE_RADAR_EXT, 3114 PHY_ERROR_RADAR 3115 }; 3116 3117 struct wmi_phyerr { 3118 __le32 tsf_timestamp; 3119 __le16 freq1; 3120 __le16 freq2; 3121 u8 rssi_combined; 3122 u8 chan_width_mhz; 3123 u8 phy_err_code; 3124 u8 rsvd0; 3125 __le32 rssi_chains[4]; 3126 __le16 nf_chains[4]; 3127 __le32 buf_len; 3128 u8 buf[0]; 3129 } __packed; 3130 3131 struct wmi_phyerr_event { 3132 __le32 num_phyerrs; 3133 __le32 tsf_l32; 3134 __le32 tsf_u32; 3135 struct wmi_phyerr phyerrs[0]; 3136 } __packed; 3137 3138 struct wmi_10_4_phyerr_event { 3139 __le32 tsf_l32; 3140 __le32 tsf_u32; 3141 __le16 freq1; 3142 __le16 freq2; 3143 u8 rssi_combined; 3144 u8 chan_width_mhz; 3145 u8 phy_err_code; 3146 u8 rsvd0; 3147 __le32 rssi_chains[4]; 3148 __le16 nf_chains[4]; 3149 __le32 phy_err_mask[2]; 3150 __le32 tsf_timestamp; 3151 __le32 buf_len; 3152 u8 buf[0]; 3153 } __packed; 3154 3155 #define PHYERR_TLV_SIG 0xBB 3156 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB 3157 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8 3158 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9 3159 3160 struct phyerr_radar_report { 3161 __le32 reg0; /* RADAR_REPORT_REG0_* */ 3162 __le32 reg1; /* REDAR_REPORT_REG1_* */ 3163 } __packed; 3164 3165 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000 3166 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31 3167 3168 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000 3169 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30 3170 3171 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000 3172 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20 3173 3174 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000 3175 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16 3176 3177 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00 3178 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10 3179 3180 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF 3181 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0 3182 3183 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000 3184 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31 3185 3186 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000 3187 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24 3188 3189 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000 3190 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16 3191 3192 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00 3193 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8 3194 3195 #define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF 3196 #define RADAR_REPORT_REG1_PULSE_DUR_LSB 0 3197 3198 struct phyerr_fft_report { 3199 __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */ 3200 __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */ 3201 } __packed; 3202 3203 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000 3204 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23 3205 3206 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000 3207 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14 3208 3209 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000 3210 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12 3211 3212 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF 3213 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0 3214 3215 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000 3216 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26 3217 3218 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000 3219 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18 3220 3221 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00 3222 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8 3223 3224 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF 3225 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0 3226 3227 struct phyerr_tlv { 3228 __le16 len; 3229 u8 tag; 3230 u8 sig; 3231 } __packed; 3232 3233 #define DFS_RSSI_POSSIBLY_FALSE 50 3234 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40 3235 3236 struct wmi_mgmt_tx_hdr { 3237 __le32 vdev_id; 3238 struct wmi_mac_addr peer_macaddr; 3239 __le32 tx_rate; 3240 __le32 tx_power; 3241 __le32 buf_len; 3242 } __packed; 3243 3244 struct wmi_mgmt_tx_cmd { 3245 struct wmi_mgmt_tx_hdr hdr; 3246 u8 buf[0]; 3247 } __packed; 3248 3249 struct wmi_echo_event { 3250 __le32 value; 3251 } __packed; 3252 3253 struct wmi_echo_cmd { 3254 __le32 value; 3255 } __packed; 3256 3257 struct wmi_pdev_set_regdomain_cmd { 3258 __le32 reg_domain; 3259 __le32 reg_domain_2G; 3260 __le32 reg_domain_5G; 3261 __le32 conformance_test_limit_2G; 3262 __le32 conformance_test_limit_5G; 3263 } __packed; 3264 3265 enum wmi_dfs_region { 3266 /* Uninitialized dfs domain */ 3267 WMI_UNINIT_DFS_DOMAIN = 0, 3268 3269 /* FCC3 dfs domain */ 3270 WMI_FCC_DFS_DOMAIN = 1, 3271 3272 /* ETSI dfs domain */ 3273 WMI_ETSI_DFS_DOMAIN = 2, 3274 3275 /*Japan dfs domain */ 3276 WMI_MKK4_DFS_DOMAIN = 3, 3277 }; 3278 3279 struct wmi_pdev_set_regdomain_cmd_10x { 3280 __le32 reg_domain; 3281 __le32 reg_domain_2G; 3282 __le32 reg_domain_5G; 3283 __le32 conformance_test_limit_2G; 3284 __le32 conformance_test_limit_5G; 3285 3286 /* dfs domain from wmi_dfs_region */ 3287 __le32 dfs_domain; 3288 } __packed; 3289 3290 /* Command to set/unset chip in quiet mode */ 3291 struct wmi_pdev_set_quiet_cmd { 3292 /* period in TUs */ 3293 __le32 period; 3294 3295 /* duration in TUs */ 3296 __le32 duration; 3297 3298 /* offset in TUs */ 3299 __le32 next_start; 3300 3301 /* enable/disable */ 3302 __le32 enabled; 3303 } __packed; 3304 3305 /* 3306 * 802.11g protection mode. 3307 */ 3308 enum ath10k_protmode { 3309 ATH10K_PROT_NONE = 0, /* no protection */ 3310 ATH10K_PROT_CTSONLY = 1, /* CTS to self */ 3311 ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */ 3312 }; 3313 3314 enum wmi_rtscts_profile { 3315 WMI_RTSCTS_FOR_NO_RATESERIES = 0, 3316 WMI_RTSCTS_FOR_SECOND_RATESERIES, 3317 WMI_RTSCTS_ACROSS_SW_RETRIES 3318 }; 3319 3320 #define WMI_RTSCTS_ENABLED 1 3321 #define WMI_RTSCTS_SET_MASK 0x0f 3322 #define WMI_RTSCTS_SET_LSB 0 3323 3324 #define WMI_RTSCTS_PROFILE_MASK 0xf0 3325 #define WMI_RTSCTS_PROFILE_LSB 4 3326 3327 enum wmi_beacon_gen_mode { 3328 WMI_BEACON_STAGGERED_MODE = 0, 3329 WMI_BEACON_BURST_MODE = 1 3330 }; 3331 3332 enum wmi_csa_event_ies_present_flag { 3333 WMI_CSA_IE_PRESENT = 0x00000001, 3334 WMI_XCSA_IE_PRESENT = 0x00000002, 3335 WMI_WBW_IE_PRESENT = 0x00000004, 3336 WMI_CSWARP_IE_PRESENT = 0x00000008, 3337 }; 3338 3339 /* wmi CSA receive event from beacon frame */ 3340 struct wmi_csa_event { 3341 __le32 i_fc_dur; 3342 /* Bit 0-15: FC */ 3343 /* Bit 16-31: DUR */ 3344 struct wmi_mac_addr i_addr1; 3345 struct wmi_mac_addr i_addr2; 3346 __le32 csa_ie[2]; 3347 __le32 xcsa_ie[2]; 3348 __le32 wb_ie[2]; 3349 __le32 cswarp_ie; 3350 __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */ 3351 } __packed; 3352 3353 /* the definition of different PDEV parameters */ 3354 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3355 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3356 #define PEER_DEFAULT_STATS_UPDATE_PERIOD 500 3357 3358 struct wmi_pdev_param_map { 3359 u32 tx_chain_mask; 3360 u32 rx_chain_mask; 3361 u32 txpower_limit2g; 3362 u32 txpower_limit5g; 3363 u32 txpower_scale; 3364 u32 beacon_gen_mode; 3365 u32 beacon_tx_mode; 3366 u32 resmgr_offchan_mode; 3367 u32 protection_mode; 3368 u32 dynamic_bw; 3369 u32 non_agg_sw_retry_th; 3370 u32 agg_sw_retry_th; 3371 u32 sta_kickout_th; 3372 u32 ac_aggrsize_scaling; 3373 u32 ltr_enable; 3374 u32 ltr_ac_latency_be; 3375 u32 ltr_ac_latency_bk; 3376 u32 ltr_ac_latency_vi; 3377 u32 ltr_ac_latency_vo; 3378 u32 ltr_ac_latency_timeout; 3379 u32 ltr_sleep_override; 3380 u32 ltr_rx_override; 3381 u32 ltr_tx_activity_timeout; 3382 u32 l1ss_enable; 3383 u32 dsleep_enable; 3384 u32 pcielp_txbuf_flush; 3385 u32 pcielp_txbuf_watermark; 3386 u32 pcielp_txbuf_tmo_en; 3387 u32 pcielp_txbuf_tmo_value; 3388 u32 pdev_stats_update_period; 3389 u32 vdev_stats_update_period; 3390 u32 peer_stats_update_period; 3391 u32 bcnflt_stats_update_period; 3392 u32 pmf_qos; 3393 u32 arp_ac_override; 3394 u32 dcs; 3395 u32 ani_enable; 3396 u32 ani_poll_period; 3397 u32 ani_listen_period; 3398 u32 ani_ofdm_level; 3399 u32 ani_cck_level; 3400 u32 dyntxchain; 3401 u32 proxy_sta; 3402 u32 idle_ps_config; 3403 u32 power_gating_sleep; 3404 u32 fast_channel_reset; 3405 u32 burst_dur; 3406 u32 burst_enable; 3407 u32 cal_period; 3408 u32 aggr_burst; 3409 u32 rx_decap_mode; 3410 u32 smart_antenna_default_antenna; 3411 u32 igmpmld_override; 3412 u32 igmpmld_tid; 3413 u32 antenna_gain; 3414 u32 rx_filter; 3415 u32 set_mcast_to_ucast_tid; 3416 u32 proxy_sta_mode; 3417 u32 set_mcast2ucast_mode; 3418 u32 set_mcast2ucast_buffer; 3419 u32 remove_mcast2ucast_buffer; 3420 u32 peer_sta_ps_statechg_enable; 3421 u32 igmpmld_ac_override; 3422 u32 block_interbss; 3423 u32 set_disable_reset_cmdid; 3424 u32 set_msdu_ttl_cmdid; 3425 u32 set_ppdu_duration_cmdid; 3426 u32 txbf_sound_period_cmdid; 3427 u32 set_promisc_mode_cmdid; 3428 u32 set_burst_mode_cmdid; 3429 u32 en_stats; 3430 u32 mu_group_policy; 3431 u32 noise_detection; 3432 u32 noise_threshold; 3433 u32 dpd_enable; 3434 u32 set_mcast_bcast_echo; 3435 u32 atf_strict_sch; 3436 u32 atf_sched_duration; 3437 u32 ant_plzn; 3438 u32 mgmt_retry_limit; 3439 u32 sensitivity_level; 3440 u32 signed_txpower_2g; 3441 u32 signed_txpower_5g; 3442 u32 enable_per_tid_amsdu; 3443 u32 enable_per_tid_ampdu; 3444 u32 cca_threshold; 3445 u32 rts_fixed_rate; 3446 u32 pdev_reset; 3447 u32 wapi_mbssid_offset; 3448 u32 arp_srcaddr; 3449 u32 arp_dstaddr; 3450 }; 3451 3452 #define WMI_PDEV_PARAM_UNSUPPORTED 0 3453 3454 enum wmi_pdev_param { 3455 /* TX chain mask */ 3456 WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3457 /* RX chain mask */ 3458 WMI_PDEV_PARAM_RX_CHAIN_MASK, 3459 /* TX power limit for 2G Radio */ 3460 WMI_PDEV_PARAM_TXPOWER_LIMIT2G, 3461 /* TX power limit for 5G Radio */ 3462 WMI_PDEV_PARAM_TXPOWER_LIMIT5G, 3463 /* TX power scale */ 3464 WMI_PDEV_PARAM_TXPOWER_SCALE, 3465 /* Beacon generation mode . 0: host, 1: target */ 3466 WMI_PDEV_PARAM_BEACON_GEN_MODE, 3467 /* Beacon generation mode . 0: staggered 1: bursted */ 3468 WMI_PDEV_PARAM_BEACON_TX_MODE, 3469 /* 3470 * Resource manager off chan mode . 3471 * 0: turn off off chan mode. 1: turn on offchan mode 3472 */ 3473 WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3474 /* 3475 * Protection mode: 3476 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3477 */ 3478 WMI_PDEV_PARAM_PROTECTION_MODE, 3479 /* 3480 * Dynamic bandwidth - 0: disable, 1: enable 3481 * 3482 * When enabled HW rate control tries different bandwidths when 3483 * retransmitting frames. 3484 */ 3485 WMI_PDEV_PARAM_DYNAMIC_BW, 3486 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3487 WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3488 /* aggregrate sw retry threshold. 0-disable*/ 3489 WMI_PDEV_PARAM_AGG_SW_RETRY_TH, 3490 /* Station kickout threshold (non of consecutive failures).0-disable */ 3491 WMI_PDEV_PARAM_STA_KICKOUT_TH, 3492 /* Aggerate size scaling configuration per AC */ 3493 WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3494 /* LTR enable */ 3495 WMI_PDEV_PARAM_LTR_ENABLE, 3496 /* LTR latency for BE, in us */ 3497 WMI_PDEV_PARAM_LTR_AC_LATENCY_BE, 3498 /* LTR latency for BK, in us */ 3499 WMI_PDEV_PARAM_LTR_AC_LATENCY_BK, 3500 /* LTR latency for VI, in us */ 3501 WMI_PDEV_PARAM_LTR_AC_LATENCY_VI, 3502 /* LTR latency for VO, in us */ 3503 WMI_PDEV_PARAM_LTR_AC_LATENCY_VO, 3504 /* LTR AC latency timeout, in ms */ 3505 WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3506 /* LTR platform latency override, in us */ 3507 WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3508 /* LTR-RX override, in us */ 3509 WMI_PDEV_PARAM_LTR_RX_OVERRIDE, 3510 /* Tx activity timeout for LTR, in us */ 3511 WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3512 /* L1SS state machine enable */ 3513 WMI_PDEV_PARAM_L1SS_ENABLE, 3514 /* Deep sleep state machine enable */ 3515 WMI_PDEV_PARAM_DSLEEP_ENABLE, 3516 /* RX buffering flush enable */ 3517 WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3518 /* RX buffering matermark */ 3519 WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3520 /* RX buffering timeout enable */ 3521 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3522 /* RX buffering timeout value */ 3523 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3524 /* pdev level stats update period in ms */ 3525 WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3526 /* vdev level stats update period in ms */ 3527 WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3528 /* peer level stats update period in ms */ 3529 WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3530 /* beacon filter status update period */ 3531 WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3532 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3533 WMI_PDEV_PARAM_PMF_QOS, 3534 /* Access category on which ARP frames are sent */ 3535 WMI_PDEV_PARAM_ARP_AC_OVERRIDE, 3536 /* DCS configuration */ 3537 WMI_PDEV_PARAM_DCS, 3538 /* Enable/Disable ANI on target */ 3539 WMI_PDEV_PARAM_ANI_ENABLE, 3540 /* configure the ANI polling period */ 3541 WMI_PDEV_PARAM_ANI_POLL_PERIOD, 3542 /* configure the ANI listening period */ 3543 WMI_PDEV_PARAM_ANI_LISTEN_PERIOD, 3544 /* configure OFDM immunity level */ 3545 WMI_PDEV_PARAM_ANI_OFDM_LEVEL, 3546 /* configure CCK immunity level */ 3547 WMI_PDEV_PARAM_ANI_CCK_LEVEL, 3548 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3549 WMI_PDEV_PARAM_DYNTXCHAIN, 3550 /* Enable/Disable proxy STA */ 3551 WMI_PDEV_PARAM_PROXY_STA, 3552 /* Enable/Disable low power state when all VDEVs are inactive/idle. */ 3553 WMI_PDEV_PARAM_IDLE_PS_CONFIG, 3554 /* Enable/Disable power gating sleep */ 3555 WMI_PDEV_PARAM_POWER_GATING_SLEEP, 3556 }; 3557 3558 enum wmi_10x_pdev_param { 3559 /* TX chian mask */ 3560 WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3561 /* RX chian mask */ 3562 WMI_10X_PDEV_PARAM_RX_CHAIN_MASK, 3563 /* TX power limit for 2G Radio */ 3564 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G, 3565 /* TX power limit for 5G Radio */ 3566 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G, 3567 /* TX power scale */ 3568 WMI_10X_PDEV_PARAM_TXPOWER_SCALE, 3569 /* Beacon generation mode . 0: host, 1: target */ 3570 WMI_10X_PDEV_PARAM_BEACON_GEN_MODE, 3571 /* Beacon generation mode . 0: staggered 1: bursted */ 3572 WMI_10X_PDEV_PARAM_BEACON_TX_MODE, 3573 /* 3574 * Resource manager off chan mode . 3575 * 0: turn off off chan mode. 1: turn on offchan mode 3576 */ 3577 WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3578 /* 3579 * Protection mode: 3580 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3581 */ 3582 WMI_10X_PDEV_PARAM_PROTECTION_MODE, 3583 /* Dynamic bandwidth 0: disable 1: enable */ 3584 WMI_10X_PDEV_PARAM_DYNAMIC_BW, 3585 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3586 WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3587 /* aggregrate sw retry threshold. 0-disable*/ 3588 WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH, 3589 /* Station kickout threshold (non of consecutive failures).0-disable */ 3590 WMI_10X_PDEV_PARAM_STA_KICKOUT_TH, 3591 /* Aggerate size scaling configuration per AC */ 3592 WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3593 /* LTR enable */ 3594 WMI_10X_PDEV_PARAM_LTR_ENABLE, 3595 /* LTR latency for BE, in us */ 3596 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE, 3597 /* LTR latency for BK, in us */ 3598 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK, 3599 /* LTR latency for VI, in us */ 3600 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI, 3601 /* LTR latency for VO, in us */ 3602 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO, 3603 /* LTR AC latency timeout, in ms */ 3604 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3605 /* LTR platform latency override, in us */ 3606 WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3607 /* LTR-RX override, in us */ 3608 WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE, 3609 /* Tx activity timeout for LTR, in us */ 3610 WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3611 /* L1SS state machine enable */ 3612 WMI_10X_PDEV_PARAM_L1SS_ENABLE, 3613 /* Deep sleep state machine enable */ 3614 WMI_10X_PDEV_PARAM_DSLEEP_ENABLE, 3615 /* pdev level stats update period in ms */ 3616 WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3617 /* vdev level stats update period in ms */ 3618 WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3619 /* peer level stats update period in ms */ 3620 WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3621 /* beacon filter status update period */ 3622 WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3623 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3624 WMI_10X_PDEV_PARAM_PMF_QOS, 3625 /* Access category on which ARP and DHCP frames are sent */ 3626 WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE, 3627 /* DCS configuration */ 3628 WMI_10X_PDEV_PARAM_DCS, 3629 /* Enable/Disable ANI on target */ 3630 WMI_10X_PDEV_PARAM_ANI_ENABLE, 3631 /* configure the ANI polling period */ 3632 WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD, 3633 /* configure the ANI listening period */ 3634 WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD, 3635 /* configure OFDM immunity level */ 3636 WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL, 3637 /* configure CCK immunity level */ 3638 WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL, 3639 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3640 WMI_10X_PDEV_PARAM_DYNTXCHAIN, 3641 /* Enable/Disable Fast channel reset*/ 3642 WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET, 3643 /* Set Bursting DUR */ 3644 WMI_10X_PDEV_PARAM_BURST_DUR, 3645 /* Set Bursting Enable*/ 3646 WMI_10X_PDEV_PARAM_BURST_ENABLE, 3647 3648 /* following are available as of firmware 10.2 */ 3649 WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 3650 WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE, 3651 WMI_10X_PDEV_PARAM_IGMPMLD_TID, 3652 WMI_10X_PDEV_PARAM_ANTENNA_GAIN, 3653 WMI_10X_PDEV_PARAM_RX_DECAP_MODE, 3654 WMI_10X_PDEV_PARAM_RX_FILTER, 3655 WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID, 3656 WMI_10X_PDEV_PARAM_PROXY_STA_MODE, 3657 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE, 3658 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 3659 WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 3660 WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE, 3661 WMI_10X_PDEV_PARAM_RTS_FIXED_RATE, 3662 WMI_10X_PDEV_PARAM_CAL_PERIOD 3663 }; 3664 3665 enum wmi_10_4_pdev_param { 3666 WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3667 WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK, 3668 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G, 3669 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G, 3670 WMI_10_4_PDEV_PARAM_TXPOWER_SCALE, 3671 WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE, 3672 WMI_10_4_PDEV_PARAM_BEACON_TX_MODE, 3673 WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3674 WMI_10_4_PDEV_PARAM_PROTECTION_MODE, 3675 WMI_10_4_PDEV_PARAM_DYNAMIC_BW, 3676 WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3677 WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH, 3678 WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH, 3679 WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3680 WMI_10_4_PDEV_PARAM_LTR_ENABLE, 3681 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE, 3682 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK, 3683 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI, 3684 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO, 3685 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3686 WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3687 WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE, 3688 WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3689 WMI_10_4_PDEV_PARAM_L1SS_ENABLE, 3690 WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE, 3691 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3692 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3693 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3694 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3695 WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3696 WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3697 WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3698 WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3699 WMI_10_4_PDEV_PARAM_PMF_QOS, 3700 WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE, 3701 WMI_10_4_PDEV_PARAM_DCS, 3702 WMI_10_4_PDEV_PARAM_ANI_ENABLE, 3703 WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD, 3704 WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD, 3705 WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL, 3706 WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL, 3707 WMI_10_4_PDEV_PARAM_DYNTXCHAIN, 3708 WMI_10_4_PDEV_PARAM_PROXY_STA, 3709 WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG, 3710 WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP, 3711 WMI_10_4_PDEV_PARAM_AGGR_BURST, 3712 WMI_10_4_PDEV_PARAM_RX_DECAP_MODE, 3713 WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET, 3714 WMI_10_4_PDEV_PARAM_BURST_DUR, 3715 WMI_10_4_PDEV_PARAM_BURST_ENABLE, 3716 WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 3717 WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE, 3718 WMI_10_4_PDEV_PARAM_IGMPMLD_TID, 3719 WMI_10_4_PDEV_PARAM_ANTENNA_GAIN, 3720 WMI_10_4_PDEV_PARAM_RX_FILTER, 3721 WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID, 3722 WMI_10_4_PDEV_PARAM_PROXY_STA_MODE, 3723 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE, 3724 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 3725 WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 3726 WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE, 3727 WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE, 3728 WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS, 3729 WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID, 3730 WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID, 3731 WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID, 3732 WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID, 3733 WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID, 3734 WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID, 3735 WMI_10_4_PDEV_PARAM_EN_STATS, 3736 WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY, 3737 WMI_10_4_PDEV_PARAM_NOISE_DETECTION, 3738 WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD, 3739 WMI_10_4_PDEV_PARAM_DPD_ENABLE, 3740 WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO, 3741 WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH, 3742 WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION, 3743 WMI_10_4_PDEV_PARAM_ANT_PLZN, 3744 WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT, 3745 WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL, 3746 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G, 3747 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G, 3748 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU, 3749 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU, 3750 WMI_10_4_PDEV_PARAM_CCA_THRESHOLD, 3751 WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE, 3752 WMI_10_4_PDEV_PARAM_CAL_PERIOD, 3753 WMI_10_4_PDEV_PARAM_PDEV_RESET, 3754 WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET, 3755 WMI_10_4_PDEV_PARAM_ARP_SRCADDR, 3756 WMI_10_4_PDEV_PARAM_ARP_DSTADDR, 3757 WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB, 3758 WMI_10_4_PDEV_PARAM_RX_BATCHMODE, 3759 WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY, 3760 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH, 3761 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR, 3762 WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE, 3763 }; 3764 3765 struct wmi_pdev_set_param_cmd { 3766 __le32 param_id; 3767 __le32 param_value; 3768 } __packed; 3769 3770 /* valid period is 1 ~ 60000ms, unit in millisecond */ 3771 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000 3772 3773 struct wmi_pdev_get_tpc_config_cmd { 3774 /* parameter */ 3775 __le32 param; 3776 } __packed; 3777 3778 #define WMI_TPC_CONFIG_PARAM 1 3779 #define WMI_TPC_RATE_MAX 160 3780 #define WMI_TPC_TX_N_CHAIN 4 3781 #define WMI_TPC_PREAM_TABLE_MAX 10 3782 #define WMI_TPC_FLAG 3 3783 #define WMI_TPC_BUF_SIZE 10 3784 3785 enum wmi_tpc_table_type { 3786 WMI_TPC_TABLE_TYPE_CDD = 0, 3787 WMI_TPC_TABLE_TYPE_STBC = 1, 3788 WMI_TPC_TABLE_TYPE_TXBF = 2, 3789 }; 3790 3791 enum wmi_tpc_config_event_flag { 3792 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, 3793 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, 3794 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, 3795 }; 3796 3797 struct wmi_pdev_tpc_config_event { 3798 __le32 reg_domain; 3799 __le32 chan_freq; 3800 __le32 phy_mode; 3801 __le32 twice_antenna_reduction; 3802 __le32 twice_max_rd_power; 3803 a_sle32 twice_antenna_gain; 3804 __le32 power_limit; 3805 __le32 rate_max; 3806 __le32 num_tx_chain; 3807 __le32 ctl; 3808 __le32 flags; 3809 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 3810 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 3811 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 3812 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 3813 u8 rates_array[WMI_TPC_RATE_MAX]; 3814 } __packed; 3815 3816 /* Transmit power scale factor. */ 3817 enum wmi_tp_scale { 3818 WMI_TP_SCALE_MAX = 0, /* no scaling (default) */ 3819 WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ 3820 WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ 3821 WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ 3822 WMI_TP_SCALE_MIN = 4, /* min, but still on */ 3823 WMI_TP_SCALE_SIZE = 5, /* max num of enum */ 3824 }; 3825 3826 struct wmi_pdev_chanlist_update_event { 3827 /* number of channels */ 3828 __le32 num_chan; 3829 /* array of channels */ 3830 struct wmi_channel channel_list[1]; 3831 } __packed; 3832 3833 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32) 3834 3835 struct wmi_debug_mesg_event { 3836 /* message buffer, NULL terminated */ 3837 char bufp[WMI_MAX_DEBUG_MESG]; 3838 } __packed; 3839 3840 enum { 3841 /* P2P device */ 3842 VDEV_SUBTYPE_P2PDEV = 0, 3843 /* P2P client */ 3844 VDEV_SUBTYPE_P2PCLI, 3845 /* P2P GO */ 3846 VDEV_SUBTYPE_P2PGO, 3847 /* BT3.0 HS */ 3848 VDEV_SUBTYPE_BT, 3849 }; 3850 3851 struct wmi_pdev_set_channel_cmd { 3852 /* idnore power , only use flags , mode and freq */ 3853 struct wmi_channel chan; 3854 } __packed; 3855 3856 struct wmi_pdev_pktlog_enable_cmd { 3857 __le32 ev_bitmap; 3858 } __packed; 3859 3860 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */ 3861 #define WMI_DSCP_MAP_MAX (64) 3862 struct wmi_pdev_set_dscp_tid_map_cmd { 3863 /* map indicating DSCP to TID conversion */ 3864 __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX]; 3865 } __packed; 3866 3867 enum mcast_bcast_rate_id { 3868 WMI_SET_MCAST_RATE, 3869 WMI_SET_BCAST_RATE 3870 }; 3871 3872 struct mcast_bcast_rate { 3873 enum mcast_bcast_rate_id rate_id; 3874 __le32 rate; 3875 } __packed; 3876 3877 struct wmi_wmm_params { 3878 __le32 cwmin; 3879 __le32 cwmax; 3880 __le32 aifs; 3881 __le32 txop; 3882 __le32 acm; 3883 __le32 no_ack; 3884 } __packed; 3885 3886 struct wmi_pdev_set_wmm_params { 3887 struct wmi_wmm_params ac_be; 3888 struct wmi_wmm_params ac_bk; 3889 struct wmi_wmm_params ac_vi; 3890 struct wmi_wmm_params ac_vo; 3891 } __packed; 3892 3893 struct wmi_wmm_params_arg { 3894 u32 cwmin; 3895 u32 cwmax; 3896 u32 aifs; 3897 u32 txop; 3898 u32 acm; 3899 u32 no_ack; 3900 }; 3901 3902 struct wmi_wmm_params_all_arg { 3903 struct wmi_wmm_params_arg ac_be; 3904 struct wmi_wmm_params_arg ac_bk; 3905 struct wmi_wmm_params_arg ac_vi; 3906 struct wmi_wmm_params_arg ac_vo; 3907 }; 3908 3909 struct wmi_pdev_stats_tx { 3910 /* Num HTT cookies queued to dispatch list */ 3911 __le32 comp_queued; 3912 3913 /* Num HTT cookies dispatched */ 3914 __le32 comp_delivered; 3915 3916 /* Num MSDU queued to WAL */ 3917 __le32 msdu_enqued; 3918 3919 /* Num MPDU queue to WAL */ 3920 __le32 mpdu_enqued; 3921 3922 /* Num MSDUs dropped by WMM limit */ 3923 __le32 wmm_drop; 3924 3925 /* Num Local frames queued */ 3926 __le32 local_enqued; 3927 3928 /* Num Local frames done */ 3929 __le32 local_freed; 3930 3931 /* Num queued to HW */ 3932 __le32 hw_queued; 3933 3934 /* Num PPDU reaped from HW */ 3935 __le32 hw_reaped; 3936 3937 /* Num underruns */ 3938 __le32 underrun; 3939 3940 /* Num PPDUs cleaned up in TX abort */ 3941 __le32 tx_abort; 3942 3943 /* Num MPDUs requed by SW */ 3944 __le32 mpdus_requed; 3945 3946 /* excessive retries */ 3947 __le32 tx_ko; 3948 3949 /* data hw rate code */ 3950 __le32 data_rc; 3951 3952 /* Scheduler self triggers */ 3953 __le32 self_triggers; 3954 3955 /* frames dropped due to excessive sw retries */ 3956 __le32 sw_retry_failure; 3957 3958 /* illegal rate phy errors */ 3959 __le32 illgl_rate_phy_err; 3960 3961 /* wal pdev continous xretry */ 3962 __le32 pdev_cont_xretry; 3963 3964 /* wal pdev continous xretry */ 3965 __le32 pdev_tx_timeout; 3966 3967 /* wal pdev resets */ 3968 __le32 pdev_resets; 3969 3970 /* frames dropped due to non-availability of stateless TIDs */ 3971 __le32 stateless_tid_alloc_failure; 3972 3973 __le32 phy_underrun; 3974 3975 /* MPDU is more than txop limit */ 3976 __le32 txop_ovf; 3977 } __packed; 3978 3979 struct wmi_10_4_pdev_stats_tx { 3980 /* Num HTT cookies queued to dispatch list */ 3981 __le32 comp_queued; 3982 3983 /* Num HTT cookies dispatched */ 3984 __le32 comp_delivered; 3985 3986 /* Num MSDU queued to WAL */ 3987 __le32 msdu_enqued; 3988 3989 /* Num MPDU queue to WAL */ 3990 __le32 mpdu_enqued; 3991 3992 /* Num MSDUs dropped by WMM limit */ 3993 __le32 wmm_drop; 3994 3995 /* Num Local frames queued */ 3996 __le32 local_enqued; 3997 3998 /* Num Local frames done */ 3999 __le32 local_freed; 4000 4001 /* Num queued to HW */ 4002 __le32 hw_queued; 4003 4004 /* Num PPDU reaped from HW */ 4005 __le32 hw_reaped; 4006 4007 /* Num underruns */ 4008 __le32 underrun; 4009 4010 /* HW Paused. */ 4011 __le32 hw_paused; 4012 4013 /* Num PPDUs cleaned up in TX abort */ 4014 __le32 tx_abort; 4015 4016 /* Num MPDUs requed by SW */ 4017 __le32 mpdus_requed; 4018 4019 /* excessive retries */ 4020 __le32 tx_ko; 4021 4022 /* data hw rate code */ 4023 __le32 data_rc; 4024 4025 /* Scheduler self triggers */ 4026 __le32 self_triggers; 4027 4028 /* frames dropped due to excessive sw retries */ 4029 __le32 sw_retry_failure; 4030 4031 /* illegal rate phy errors */ 4032 __le32 illgl_rate_phy_err; 4033 4034 /* wal pdev continuous xretry */ 4035 __le32 pdev_cont_xretry; 4036 4037 /* wal pdev tx timeouts */ 4038 __le32 pdev_tx_timeout; 4039 4040 /* wal pdev resets */ 4041 __le32 pdev_resets; 4042 4043 /* frames dropped due to non-availability of stateless TIDs */ 4044 __le32 stateless_tid_alloc_failure; 4045 4046 __le32 phy_underrun; 4047 4048 /* MPDU is more than txop limit */ 4049 __le32 txop_ovf; 4050 4051 /* Number of Sequences posted */ 4052 __le32 seq_posted; 4053 4054 /* Number of Sequences failed queueing */ 4055 __le32 seq_failed_queueing; 4056 4057 /* Number of Sequences completed */ 4058 __le32 seq_completed; 4059 4060 /* Number of Sequences restarted */ 4061 __le32 seq_restarted; 4062 4063 /* Number of MU Sequences posted */ 4064 __le32 mu_seq_posted; 4065 4066 /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */ 4067 __le32 mpdus_sw_flush; 4068 4069 /* Num MPDUs filtered by HW, all filter condition (TTL expired) */ 4070 __le32 mpdus_hw_filter; 4071 4072 /* Num MPDUs truncated by PDG 4073 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw) 4074 */ 4075 __le32 mpdus_truncated; 4076 4077 /* Num MPDUs that was tried but didn't receive ACK or BA */ 4078 __le32 mpdus_ack_failed; 4079 4080 /* Num MPDUs that was dropped due to expiry. */ 4081 __le32 mpdus_expired; 4082 } __packed; 4083 4084 struct wmi_pdev_stats_rx { 4085 /* Cnts any change in ring routing mid-ppdu */ 4086 __le32 mid_ppdu_route_change; 4087 4088 /* Total number of statuses processed */ 4089 __le32 status_rcvd; 4090 4091 /* Extra frags on rings 0-3 */ 4092 __le32 r0_frags; 4093 __le32 r1_frags; 4094 __le32 r2_frags; 4095 __le32 r3_frags; 4096 4097 /* MSDUs / MPDUs delivered to HTT */ 4098 __le32 htt_msdus; 4099 __le32 htt_mpdus; 4100 4101 /* MSDUs / MPDUs delivered to local stack */ 4102 __le32 loc_msdus; 4103 __le32 loc_mpdus; 4104 4105 /* AMSDUs that have more MSDUs than the status ring size */ 4106 __le32 oversize_amsdu; 4107 4108 /* Number of PHY errors */ 4109 __le32 phy_errs; 4110 4111 /* Number of PHY errors drops */ 4112 __le32 phy_err_drop; 4113 4114 /* Number of mpdu errors - FCS, MIC, ENC etc. */ 4115 __le32 mpdu_errs; 4116 } __packed; 4117 4118 struct wmi_pdev_stats_peer { 4119 /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ 4120 __le32 dummy; 4121 } __packed; 4122 4123 enum wmi_stats_id { 4124 WMI_STAT_PEER = BIT(0), 4125 WMI_STAT_AP = BIT(1), 4126 WMI_STAT_PDEV = BIT(2), 4127 WMI_STAT_VDEV = BIT(3), 4128 WMI_STAT_BCNFLT = BIT(4), 4129 WMI_STAT_VDEV_RATE = BIT(5), 4130 }; 4131 4132 enum wmi_10_4_stats_id { 4133 WMI_10_4_STAT_PEER = BIT(0), 4134 WMI_10_4_STAT_AP = BIT(1), 4135 WMI_10_4_STAT_INST = BIT(2), 4136 WMI_10_4_STAT_PEER_EXTD = BIT(3), 4137 }; 4138 4139 struct wlan_inst_rssi_args { 4140 __le16 cfg_retry_count; 4141 __le16 retry_count; 4142 }; 4143 4144 struct wmi_request_stats_cmd { 4145 __le32 stats_id; 4146 4147 __le32 vdev_id; 4148 4149 /* peer MAC address */ 4150 struct wmi_mac_addr peer_macaddr; 4151 4152 /* Instantaneous RSSI arguments */ 4153 struct wlan_inst_rssi_args inst_rssi_args; 4154 } __packed; 4155 4156 /* Suspend option */ 4157 enum { 4158 /* suspend */ 4159 WMI_PDEV_SUSPEND, 4160 4161 /* suspend and disable all interrupts */ 4162 WMI_PDEV_SUSPEND_AND_DISABLE_INTR, 4163 }; 4164 4165 struct wmi_pdev_suspend_cmd { 4166 /* suspend option sent to target */ 4167 __le32 suspend_opt; 4168 } __packed; 4169 4170 struct wmi_stats_event { 4171 __le32 stats_id; /* WMI_STAT_ */ 4172 /* 4173 * number of pdev stats event structures 4174 * (wmi_pdev_stats) 0 or 1 4175 */ 4176 __le32 num_pdev_stats; 4177 /* 4178 * number of vdev stats event structures 4179 * (wmi_vdev_stats) 0 or max vdevs 4180 */ 4181 __le32 num_vdev_stats; 4182 /* 4183 * number of peer stats event structures 4184 * (wmi_peer_stats) 0 or max peers 4185 */ 4186 __le32 num_peer_stats; 4187 __le32 num_bcnflt_stats; 4188 /* 4189 * followed by 4190 * num_pdev_stats * size of(struct wmi_pdev_stats) 4191 * num_vdev_stats * size of(struct wmi_vdev_stats) 4192 * num_peer_stats * size of(struct wmi_peer_stats) 4193 * 4194 * By having a zero sized array, the pointer to data area 4195 * becomes available without increasing the struct size 4196 */ 4197 u8 data[0]; 4198 } __packed; 4199 4200 struct wmi_10_2_stats_event { 4201 __le32 stats_id; /* %WMI_REQUEST_ */ 4202 __le32 num_pdev_stats; 4203 __le32 num_pdev_ext_stats; 4204 __le32 num_vdev_stats; 4205 __le32 num_peer_stats; 4206 __le32 num_bcnflt_stats; 4207 u8 data[0]; 4208 } __packed; 4209 4210 /* 4211 * PDEV statistics 4212 * TODO: add all PDEV stats here 4213 */ 4214 struct wmi_pdev_stats_base { 4215 __le32 chan_nf; 4216 __le32 tx_frame_count; 4217 __le32 rx_frame_count; 4218 __le32 rx_clear_count; 4219 __le32 cycle_count; 4220 __le32 phy_err_count; 4221 __le32 chan_tx_pwr; 4222 } __packed; 4223 4224 struct wmi_pdev_stats { 4225 struct wmi_pdev_stats_base base; 4226 struct wmi_pdev_stats_tx tx; 4227 struct wmi_pdev_stats_rx rx; 4228 struct wmi_pdev_stats_peer peer; 4229 } __packed; 4230 4231 struct wmi_pdev_stats_extra { 4232 __le32 ack_rx_bad; 4233 __le32 rts_bad; 4234 __le32 rts_good; 4235 __le32 fcs_bad; 4236 __le32 no_beacons; 4237 __le32 mib_int_count; 4238 } __packed; 4239 4240 struct wmi_10x_pdev_stats { 4241 struct wmi_pdev_stats_base base; 4242 struct wmi_pdev_stats_tx tx; 4243 struct wmi_pdev_stats_rx rx; 4244 struct wmi_pdev_stats_peer peer; 4245 struct wmi_pdev_stats_extra extra; 4246 } __packed; 4247 4248 struct wmi_pdev_stats_mem { 4249 __le32 dram_free; 4250 __le32 iram_free; 4251 } __packed; 4252 4253 struct wmi_10_2_pdev_stats { 4254 struct wmi_pdev_stats_base base; 4255 struct wmi_pdev_stats_tx tx; 4256 __le32 mc_drop; 4257 struct wmi_pdev_stats_rx rx; 4258 __le32 pdev_rx_timeout; 4259 struct wmi_pdev_stats_mem mem; 4260 struct wmi_pdev_stats_peer peer; 4261 struct wmi_pdev_stats_extra extra; 4262 } __packed; 4263 4264 struct wmi_10_4_pdev_stats { 4265 struct wmi_pdev_stats_base base; 4266 struct wmi_10_4_pdev_stats_tx tx; 4267 struct wmi_pdev_stats_rx rx; 4268 __le32 rx_ovfl_errs; 4269 struct wmi_pdev_stats_mem mem; 4270 __le32 sram_free_size; 4271 struct wmi_pdev_stats_extra extra; 4272 } __packed; 4273 4274 /* 4275 * VDEV statistics 4276 * TODO: add all VDEV stats here 4277 */ 4278 struct wmi_vdev_stats { 4279 __le32 vdev_id; 4280 } __packed; 4281 4282 /* 4283 * peer statistics. 4284 * TODO: add more stats 4285 */ 4286 struct wmi_peer_stats { 4287 struct wmi_mac_addr peer_macaddr; 4288 __le32 peer_rssi; 4289 __le32 peer_tx_rate; 4290 } __packed; 4291 4292 struct wmi_10x_peer_stats { 4293 struct wmi_peer_stats old; 4294 __le32 peer_rx_rate; 4295 } __packed; 4296 4297 struct wmi_10_2_peer_stats { 4298 struct wmi_peer_stats old; 4299 __le32 peer_rx_rate; 4300 __le32 current_per; 4301 __le32 retries; 4302 __le32 tx_rate_count; 4303 __le32 max_4ms_frame_len; 4304 __le32 total_sub_frames; 4305 __le32 tx_bytes; 4306 __le32 num_pkt_loss_overflow[4]; 4307 __le32 num_pkt_loss_excess_retry[4]; 4308 } __packed; 4309 4310 struct wmi_10_2_4_peer_stats { 4311 struct wmi_10_2_peer_stats common; 4312 __le32 peer_rssi_changed; 4313 } __packed; 4314 4315 struct wmi_10_2_4_ext_peer_stats { 4316 struct wmi_10_2_peer_stats common; 4317 __le32 peer_rssi_changed; 4318 __le32 rx_duration; 4319 } __packed; 4320 4321 struct wmi_10_4_peer_stats { 4322 struct wmi_mac_addr peer_macaddr; 4323 __le32 peer_rssi; 4324 __le32 peer_rssi_seq_num; 4325 __le32 peer_tx_rate; 4326 __le32 peer_rx_rate; 4327 __le32 current_per; 4328 __le32 retries; 4329 __le32 tx_rate_count; 4330 __le32 max_4ms_frame_len; 4331 __le32 total_sub_frames; 4332 __le32 tx_bytes; 4333 __le32 num_pkt_loss_overflow[4]; 4334 __le32 num_pkt_loss_excess_retry[4]; 4335 __le32 peer_rssi_changed; 4336 } __packed; 4337 4338 struct wmi_10_4_peer_extd_stats { 4339 struct wmi_10_4_peer_stats common; 4340 struct wmi_mac_addr peer_macaddr; 4341 __le32 inactive_time; 4342 __le32 peer_chain_rssi; 4343 __le32 rx_duration; 4344 __le32 reserved[10]; 4345 } __packed; 4346 4347 struct wmi_10_2_pdev_ext_stats { 4348 __le32 rx_rssi_comb; 4349 __le32 rx_rssi[4]; 4350 __le32 rx_mcs[10]; 4351 __le32 tx_mcs[10]; 4352 __le32 ack_rssi; 4353 } __packed; 4354 4355 struct wmi_vdev_create_cmd { 4356 __le32 vdev_id; 4357 __le32 vdev_type; 4358 __le32 vdev_subtype; 4359 struct wmi_mac_addr vdev_macaddr; 4360 } __packed; 4361 4362 enum wmi_vdev_type { 4363 WMI_VDEV_TYPE_AP = 1, 4364 WMI_VDEV_TYPE_STA = 2, 4365 WMI_VDEV_TYPE_IBSS = 3, 4366 WMI_VDEV_TYPE_MONITOR = 4, 4367 }; 4368 4369 enum wmi_vdev_subtype { 4370 WMI_VDEV_SUBTYPE_NONE, 4371 WMI_VDEV_SUBTYPE_P2P_DEVICE, 4372 WMI_VDEV_SUBTYPE_P2P_CLIENT, 4373 WMI_VDEV_SUBTYPE_P2P_GO, 4374 WMI_VDEV_SUBTYPE_PROXY_STA, 4375 WMI_VDEV_SUBTYPE_MESH_11S, 4376 WMI_VDEV_SUBTYPE_MESH_NON_11S, 4377 }; 4378 4379 enum wmi_vdev_subtype_legacy { 4380 WMI_VDEV_SUBTYPE_LEGACY_NONE = 0, 4381 WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1, 4382 WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2, 4383 WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3, 4384 WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4, 4385 }; 4386 4387 enum wmi_vdev_subtype_10_2_4 { 4388 WMI_VDEV_SUBTYPE_10_2_4_NONE = 0, 4389 WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1, 4390 WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2, 4391 WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3, 4392 WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4, 4393 WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5, 4394 }; 4395 4396 enum wmi_vdev_subtype_10_4 { 4397 WMI_VDEV_SUBTYPE_10_4_NONE = 0, 4398 WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1, 4399 WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2, 4400 WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3, 4401 WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4, 4402 WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5, 4403 WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6, 4404 }; 4405 4406 /* values for vdev_subtype */ 4407 4408 /* values for vdev_start_request flags */ 4409 /* 4410 * Indicates that AP VDEV uses hidden ssid. only valid for 4411 * AP/GO */ 4412 #define WMI_VDEV_START_HIDDEN_SSID (1 << 0) 4413 /* 4414 * Indicates if robust management frame/management frame 4415 * protection is enabled. For GO/AP vdevs, it indicates that 4416 * it may support station/client associations with RMF enabled. 4417 * For STA/client vdevs, it indicates that sta will 4418 * associate with AP with RMF enabled. */ 4419 #define WMI_VDEV_START_PMF_ENABLED (1 << 1) 4420 4421 struct wmi_p2p_noa_descriptor { 4422 __le32 type_count; /* 255: continuous schedule, 0: reserved */ 4423 __le32 duration; /* Absent period duration in micro seconds */ 4424 __le32 interval; /* Absent period interval in micro seconds */ 4425 __le32 start_time; /* 32 bit tsf time when in starts */ 4426 } __packed; 4427 4428 struct wmi_vdev_start_request_cmd { 4429 /* WMI channel */ 4430 struct wmi_channel chan; 4431 /* unique id identifying the VDEV, generated by the caller */ 4432 __le32 vdev_id; 4433 /* requestor id identifying the caller module */ 4434 __le32 requestor_id; 4435 /* beacon interval from received beacon */ 4436 __le32 beacon_interval; 4437 /* DTIM Period from the received beacon */ 4438 __le32 dtim_period; 4439 /* Flags */ 4440 __le32 flags; 4441 /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ 4442 struct wmi_ssid ssid; 4443 /* beacon/probe reponse xmit rate. Applicable for SoftAP. */ 4444 __le32 bcn_tx_rate; 4445 /* beacon/probe reponse xmit power. Applicable for SoftAP. */ 4446 __le32 bcn_tx_power; 4447 /* number of p2p NOA descriptor(s) from scan entry */ 4448 __le32 num_noa_descriptors; 4449 /* 4450 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID. 4451 * During CAC, Our HW shouldn't ack ditected frames 4452 */ 4453 __le32 disable_hw_ack; 4454 /* actual p2p NOA descriptor from scan entry */ 4455 struct wmi_p2p_noa_descriptor noa_descriptors[2]; 4456 } __packed; 4457 4458 struct wmi_vdev_restart_request_cmd { 4459 struct wmi_vdev_start_request_cmd vdev_start_request_cmd; 4460 } __packed; 4461 4462 struct wmi_vdev_start_request_arg { 4463 u32 vdev_id; 4464 struct wmi_channel_arg channel; 4465 u32 bcn_intval; 4466 u32 dtim_period; 4467 u8 *ssid; 4468 u32 ssid_len; 4469 u32 bcn_tx_rate; 4470 u32 bcn_tx_power; 4471 bool disable_hw_ack; 4472 bool hidden_ssid; 4473 bool pmf_enabled; 4474 }; 4475 4476 struct wmi_vdev_delete_cmd { 4477 /* unique id identifying the VDEV, generated by the caller */ 4478 __le32 vdev_id; 4479 } __packed; 4480 4481 struct wmi_vdev_up_cmd { 4482 __le32 vdev_id; 4483 __le32 vdev_assoc_id; 4484 struct wmi_mac_addr vdev_bssid; 4485 } __packed; 4486 4487 struct wmi_vdev_stop_cmd { 4488 __le32 vdev_id; 4489 } __packed; 4490 4491 struct wmi_vdev_down_cmd { 4492 __le32 vdev_id; 4493 } __packed; 4494 4495 struct wmi_vdev_standby_response_cmd { 4496 /* unique id identifying the VDEV, generated by the caller */ 4497 __le32 vdev_id; 4498 } __packed; 4499 4500 struct wmi_vdev_resume_response_cmd { 4501 /* unique id identifying the VDEV, generated by the caller */ 4502 __le32 vdev_id; 4503 } __packed; 4504 4505 struct wmi_vdev_set_param_cmd { 4506 __le32 vdev_id; 4507 __le32 param_id; 4508 __le32 param_value; 4509 } __packed; 4510 4511 #define WMI_MAX_KEY_INDEX 3 4512 #define WMI_MAX_KEY_LEN 32 4513 4514 #define WMI_KEY_PAIRWISE 0x00 4515 #define WMI_KEY_GROUP 0x01 4516 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */ 4517 4518 struct wmi_key_seq_counter { 4519 __le32 key_seq_counter_l; 4520 __le32 key_seq_counter_h; 4521 } __packed; 4522 4523 #define WMI_CIPHER_NONE 0x0 /* clear key */ 4524 #define WMI_CIPHER_WEP 0x1 4525 #define WMI_CIPHER_TKIP 0x2 4526 #define WMI_CIPHER_AES_OCB 0x3 4527 #define WMI_CIPHER_AES_CCM 0x4 4528 #define WMI_CIPHER_WAPI 0x5 4529 #define WMI_CIPHER_CKIP 0x6 4530 #define WMI_CIPHER_AES_CMAC 0x7 4531 4532 struct wmi_vdev_install_key_cmd { 4533 __le32 vdev_id; 4534 struct wmi_mac_addr peer_macaddr; 4535 __le32 key_idx; 4536 __le32 key_flags; 4537 __le32 key_cipher; /* %WMI_CIPHER_ */ 4538 struct wmi_key_seq_counter key_rsc_counter; 4539 struct wmi_key_seq_counter key_global_rsc_counter; 4540 struct wmi_key_seq_counter key_tsc_counter; 4541 u8 wpi_key_rsc_counter[16]; 4542 u8 wpi_key_tsc_counter[16]; 4543 __le32 key_len; 4544 __le32 key_txmic_len; 4545 __le32 key_rxmic_len; 4546 4547 /* contains key followed by tx mic followed by rx mic */ 4548 u8 key_data[0]; 4549 } __packed; 4550 4551 struct wmi_vdev_install_key_arg { 4552 u32 vdev_id; 4553 const u8 *macaddr; 4554 u32 key_idx; 4555 u32 key_flags; 4556 u32 key_cipher; 4557 u32 key_len; 4558 u32 key_txmic_len; 4559 u32 key_rxmic_len; 4560 const void *key_data; 4561 }; 4562 4563 /* 4564 * vdev fixed rate format: 4565 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_ 4566 * - nss - b5:b4 - ss number (0 mean 1ss) 4567 * - rate_mcs - b3:b0 - as below 4568 * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps, 4569 * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s) 4570 * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps, 4571 * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps 4572 * HT/VHT: MCS index 4573 */ 4574 4575 /* Preamble types to be used with VDEV fixed rate configuration */ 4576 enum wmi_rate_preamble { 4577 WMI_RATE_PREAMBLE_OFDM, 4578 WMI_RATE_PREAMBLE_CCK, 4579 WMI_RATE_PREAMBLE_HT, 4580 WMI_RATE_PREAMBLE_VHT, 4581 }; 4582 4583 #define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3)) 4584 #define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3) 4585 #define ATH10K_HW_RATECODE(rate, nss, preamble) \ 4586 (((preamble) << 6) | ((nss) << 4) | (rate)) 4587 4588 /* Value to disable fixed rate setting */ 4589 #define WMI_FIXED_RATE_NONE (0xff) 4590 4591 struct wmi_vdev_param_map { 4592 u32 rts_threshold; 4593 u32 fragmentation_threshold; 4594 u32 beacon_interval; 4595 u32 listen_interval; 4596 u32 multicast_rate; 4597 u32 mgmt_tx_rate; 4598 u32 slot_time; 4599 u32 preamble; 4600 u32 swba_time; 4601 u32 wmi_vdev_stats_update_period; 4602 u32 wmi_vdev_pwrsave_ageout_time; 4603 u32 wmi_vdev_host_swba_interval; 4604 u32 dtim_period; 4605 u32 wmi_vdev_oc_scheduler_air_time_limit; 4606 u32 wds; 4607 u32 atim_window; 4608 u32 bmiss_count_max; 4609 u32 bmiss_first_bcnt; 4610 u32 bmiss_final_bcnt; 4611 u32 feature_wmm; 4612 u32 chwidth; 4613 u32 chextoffset; 4614 u32 disable_htprotection; 4615 u32 sta_quickkickout; 4616 u32 mgmt_rate; 4617 u32 protection_mode; 4618 u32 fixed_rate; 4619 u32 sgi; 4620 u32 ldpc; 4621 u32 tx_stbc; 4622 u32 rx_stbc; 4623 u32 intra_bss_fwd; 4624 u32 def_keyid; 4625 u32 nss; 4626 u32 bcast_data_rate; 4627 u32 mcast_data_rate; 4628 u32 mcast_indicate; 4629 u32 dhcp_indicate; 4630 u32 unknown_dest_indicate; 4631 u32 ap_keepalive_min_idle_inactive_time_secs; 4632 u32 ap_keepalive_max_idle_inactive_time_secs; 4633 u32 ap_keepalive_max_unresponsive_time_secs; 4634 u32 ap_enable_nawds; 4635 u32 mcast2ucast_set; 4636 u32 enable_rtscts; 4637 u32 txbf; 4638 u32 packet_powersave; 4639 u32 drop_unencry; 4640 u32 tx_encap_type; 4641 u32 ap_detect_out_of_sync_sleeping_sta_time_secs; 4642 u32 rc_num_retries; 4643 u32 cabq_maxdur; 4644 u32 mfptest_set; 4645 u32 rts_fixed_rate; 4646 u32 vht_sgimask; 4647 u32 vht80_ratemask; 4648 u32 early_rx_adjust_enable; 4649 u32 early_rx_tgt_bmiss_num; 4650 u32 early_rx_bmiss_sample_cycle; 4651 u32 early_rx_slop_step; 4652 u32 early_rx_init_slop; 4653 u32 early_rx_adjust_pause; 4654 u32 proxy_sta; 4655 u32 meru_vc; 4656 u32 rx_decap_type; 4657 u32 bw_nss_ratemask; 4658 u32 set_tsf; 4659 }; 4660 4661 #define WMI_VDEV_PARAM_UNSUPPORTED 0 4662 4663 /* the definition of different VDEV parameters */ 4664 enum wmi_vdev_param { 4665 /* RTS Threshold */ 4666 WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1, 4667 /* Fragmentation threshold */ 4668 WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 4669 /* beacon interval in TUs */ 4670 WMI_VDEV_PARAM_BEACON_INTERVAL, 4671 /* Listen interval in TUs */ 4672 WMI_VDEV_PARAM_LISTEN_INTERVAL, 4673 /* muticast rate in Mbps */ 4674 WMI_VDEV_PARAM_MULTICAST_RATE, 4675 /* management frame rate in Mbps */ 4676 WMI_VDEV_PARAM_MGMT_TX_RATE, 4677 /* slot time (long vs short) */ 4678 WMI_VDEV_PARAM_SLOT_TIME, 4679 /* preamble (long vs short) */ 4680 WMI_VDEV_PARAM_PREAMBLE, 4681 /* SWBA time (time before tbtt in msec) */ 4682 WMI_VDEV_PARAM_SWBA_TIME, 4683 /* time period for updating VDEV stats */ 4684 WMI_VDEV_STATS_UPDATE_PERIOD, 4685 /* age out time in msec for frames queued for station in power save */ 4686 WMI_VDEV_PWRSAVE_AGEOUT_TIME, 4687 /* 4688 * Host SWBA interval (time in msec before tbtt for SWBA event 4689 * generation). 4690 */ 4691 WMI_VDEV_HOST_SWBA_INTERVAL, 4692 /* DTIM period (specified in units of num beacon intervals) */ 4693 WMI_VDEV_PARAM_DTIM_PERIOD, 4694 /* 4695 * scheduler air time limit for this VDEV. used by off chan 4696 * scheduler. 4697 */ 4698 WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 4699 /* enable/dsiable WDS for this VDEV */ 4700 WMI_VDEV_PARAM_WDS, 4701 /* ATIM Window */ 4702 WMI_VDEV_PARAM_ATIM_WINDOW, 4703 /* BMISS max */ 4704 WMI_VDEV_PARAM_BMISS_COUNT_MAX, 4705 /* BMISS first time */ 4706 WMI_VDEV_PARAM_BMISS_FIRST_BCNT, 4707 /* BMISS final time */ 4708 WMI_VDEV_PARAM_BMISS_FINAL_BCNT, 4709 /* WMM enables/disabled */ 4710 WMI_VDEV_PARAM_FEATURE_WMM, 4711 /* Channel width */ 4712 WMI_VDEV_PARAM_CHWIDTH, 4713 /* Channel Offset */ 4714 WMI_VDEV_PARAM_CHEXTOFFSET, 4715 /* Disable HT Protection */ 4716 WMI_VDEV_PARAM_DISABLE_HTPROTECTION, 4717 /* Quick STA Kickout */ 4718 WMI_VDEV_PARAM_STA_QUICKKICKOUT, 4719 /* Rate to be used with Management frames */ 4720 WMI_VDEV_PARAM_MGMT_RATE, 4721 /* Protection Mode */ 4722 WMI_VDEV_PARAM_PROTECTION_MODE, 4723 /* Fixed rate setting */ 4724 WMI_VDEV_PARAM_FIXED_RATE, 4725 /* Short GI Enable/Disable */ 4726 WMI_VDEV_PARAM_SGI, 4727 /* Enable LDPC */ 4728 WMI_VDEV_PARAM_LDPC, 4729 /* Enable Tx STBC */ 4730 WMI_VDEV_PARAM_TX_STBC, 4731 /* Enable Rx STBC */ 4732 WMI_VDEV_PARAM_RX_STBC, 4733 /* Intra BSS forwarding */ 4734 WMI_VDEV_PARAM_INTRA_BSS_FWD, 4735 /* Setting Default xmit key for Vdev */ 4736 WMI_VDEV_PARAM_DEF_KEYID, 4737 /* NSS width */ 4738 WMI_VDEV_PARAM_NSS, 4739 /* Set the custom rate for the broadcast data frames */ 4740 WMI_VDEV_PARAM_BCAST_DATA_RATE, 4741 /* Set the custom rate (rate-code) for multicast data frames */ 4742 WMI_VDEV_PARAM_MCAST_DATA_RATE, 4743 /* Tx multicast packet indicate Enable/Disable */ 4744 WMI_VDEV_PARAM_MCAST_INDICATE, 4745 /* Tx DHCP packet indicate Enable/Disable */ 4746 WMI_VDEV_PARAM_DHCP_INDICATE, 4747 /* Enable host inspection of Tx unicast packet to unknown destination */ 4748 WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 4749 4750 /* The minimum amount of time AP begins to consider STA inactive */ 4751 WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 4752 4753 /* 4754 * An associated STA is considered inactive when there is no recent 4755 * TX/RX activity and no downlink frames are buffered for it. Once a 4756 * STA exceeds the maximum idle inactive time, the AP will send an 4757 * 802.11 data-null as a keep alive to verify the STA is still 4758 * associated. If the STA does ACK the data-null, or if the data-null 4759 * is buffered and the STA does not retrieve it, the STA will be 4760 * considered unresponsive 4761 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 4762 */ 4763 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 4764 4765 /* 4766 * An associated STA is considered unresponsive if there is no recent 4767 * TX/RX activity and downlink frames are buffered for it. Once a STA 4768 * exceeds the maximum unresponsive time, the AP will send a 4769 * WMI_STA_KICKOUT event to the host so the STA can be deleted. */ 4770 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 4771 4772 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 4773 WMI_VDEV_PARAM_AP_ENABLE_NAWDS, 4774 /* Enable/Disable RTS-CTS */ 4775 WMI_VDEV_PARAM_ENABLE_RTSCTS, 4776 /* Enable TXBFee/er */ 4777 WMI_VDEV_PARAM_TXBF, 4778 4779 /* Set packet power save */ 4780 WMI_VDEV_PARAM_PACKET_POWERSAVE, 4781 4782 /* 4783 * Drops un-encrypted packets if eceived in an encrypted connection 4784 * otherwise forwards to host. 4785 */ 4786 WMI_VDEV_PARAM_DROP_UNENCRY, 4787 4788 /* 4789 * Set the encapsulation type for frames. 4790 */ 4791 WMI_VDEV_PARAM_TX_ENCAP_TYPE, 4792 }; 4793 4794 /* the definition of different VDEV parameters */ 4795 enum wmi_10x_vdev_param { 4796 /* RTS Threshold */ 4797 WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1, 4798 /* Fragmentation threshold */ 4799 WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 4800 /* beacon interval in TUs */ 4801 WMI_10X_VDEV_PARAM_BEACON_INTERVAL, 4802 /* Listen interval in TUs */ 4803 WMI_10X_VDEV_PARAM_LISTEN_INTERVAL, 4804 /* muticast rate in Mbps */ 4805 WMI_10X_VDEV_PARAM_MULTICAST_RATE, 4806 /* management frame rate in Mbps */ 4807 WMI_10X_VDEV_PARAM_MGMT_TX_RATE, 4808 /* slot time (long vs short) */ 4809 WMI_10X_VDEV_PARAM_SLOT_TIME, 4810 /* preamble (long vs short) */ 4811 WMI_10X_VDEV_PARAM_PREAMBLE, 4812 /* SWBA time (time before tbtt in msec) */ 4813 WMI_10X_VDEV_PARAM_SWBA_TIME, 4814 /* time period for updating VDEV stats */ 4815 WMI_10X_VDEV_STATS_UPDATE_PERIOD, 4816 /* age out time in msec for frames queued for station in power save */ 4817 WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME, 4818 /* 4819 * Host SWBA interval (time in msec before tbtt for SWBA event 4820 * generation). 4821 */ 4822 WMI_10X_VDEV_HOST_SWBA_INTERVAL, 4823 /* DTIM period (specified in units of num beacon intervals) */ 4824 WMI_10X_VDEV_PARAM_DTIM_PERIOD, 4825 /* 4826 * scheduler air time limit for this VDEV. used by off chan 4827 * scheduler. 4828 */ 4829 WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 4830 /* enable/dsiable WDS for this VDEV */ 4831 WMI_10X_VDEV_PARAM_WDS, 4832 /* ATIM Window */ 4833 WMI_10X_VDEV_PARAM_ATIM_WINDOW, 4834 /* BMISS max */ 4835 WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX, 4836 /* WMM enables/disabled */ 4837 WMI_10X_VDEV_PARAM_FEATURE_WMM, 4838 /* Channel width */ 4839 WMI_10X_VDEV_PARAM_CHWIDTH, 4840 /* Channel Offset */ 4841 WMI_10X_VDEV_PARAM_CHEXTOFFSET, 4842 /* Disable HT Protection */ 4843 WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION, 4844 /* Quick STA Kickout */ 4845 WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT, 4846 /* Rate to be used with Management frames */ 4847 WMI_10X_VDEV_PARAM_MGMT_RATE, 4848 /* Protection Mode */ 4849 WMI_10X_VDEV_PARAM_PROTECTION_MODE, 4850 /* Fixed rate setting */ 4851 WMI_10X_VDEV_PARAM_FIXED_RATE, 4852 /* Short GI Enable/Disable */ 4853 WMI_10X_VDEV_PARAM_SGI, 4854 /* Enable LDPC */ 4855 WMI_10X_VDEV_PARAM_LDPC, 4856 /* Enable Tx STBC */ 4857 WMI_10X_VDEV_PARAM_TX_STBC, 4858 /* Enable Rx STBC */ 4859 WMI_10X_VDEV_PARAM_RX_STBC, 4860 /* Intra BSS forwarding */ 4861 WMI_10X_VDEV_PARAM_INTRA_BSS_FWD, 4862 /* Setting Default xmit key for Vdev */ 4863 WMI_10X_VDEV_PARAM_DEF_KEYID, 4864 /* NSS width */ 4865 WMI_10X_VDEV_PARAM_NSS, 4866 /* Set the custom rate for the broadcast data frames */ 4867 WMI_10X_VDEV_PARAM_BCAST_DATA_RATE, 4868 /* Set the custom rate (rate-code) for multicast data frames */ 4869 WMI_10X_VDEV_PARAM_MCAST_DATA_RATE, 4870 /* Tx multicast packet indicate Enable/Disable */ 4871 WMI_10X_VDEV_PARAM_MCAST_INDICATE, 4872 /* Tx DHCP packet indicate Enable/Disable */ 4873 WMI_10X_VDEV_PARAM_DHCP_INDICATE, 4874 /* Enable host inspection of Tx unicast packet to unknown destination */ 4875 WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 4876 4877 /* The minimum amount of time AP begins to consider STA inactive */ 4878 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 4879 4880 /* 4881 * An associated STA is considered inactive when there is no recent 4882 * TX/RX activity and no downlink frames are buffered for it. Once a 4883 * STA exceeds the maximum idle inactive time, the AP will send an 4884 * 802.11 data-null as a keep alive to verify the STA is still 4885 * associated. If the STA does ACK the data-null, or if the data-null 4886 * is buffered and the STA does not retrieve it, the STA will be 4887 * considered unresponsive 4888 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 4889 */ 4890 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 4891 4892 /* 4893 * An associated STA is considered unresponsive if there is no recent 4894 * TX/RX activity and downlink frames are buffered for it. Once a STA 4895 * exceeds the maximum unresponsive time, the AP will send a 4896 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. */ 4897 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 4898 4899 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 4900 WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS, 4901 4902 WMI_10X_VDEV_PARAM_MCAST2UCAST_SET, 4903 /* Enable/Disable RTS-CTS */ 4904 WMI_10X_VDEV_PARAM_ENABLE_RTSCTS, 4905 4906 WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 4907 4908 /* following are available as of firmware 10.2 */ 4909 WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE, 4910 WMI_10X_VDEV_PARAM_CABQ_MAXDUR, 4911 WMI_10X_VDEV_PARAM_MFPTEST_SET, 4912 WMI_10X_VDEV_PARAM_RTS_FIXED_RATE, 4913 WMI_10X_VDEV_PARAM_VHT_SGIMASK, 4914 WMI_10X_VDEV_PARAM_VHT80_RATEMASK, 4915 WMI_10X_VDEV_PARAM_TSF_INCREMENT, 4916 }; 4917 4918 enum wmi_10_4_vdev_param { 4919 WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1, 4920 WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 4921 WMI_10_4_VDEV_PARAM_BEACON_INTERVAL, 4922 WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL, 4923 WMI_10_4_VDEV_PARAM_MULTICAST_RATE, 4924 WMI_10_4_VDEV_PARAM_MGMT_TX_RATE, 4925 WMI_10_4_VDEV_PARAM_SLOT_TIME, 4926 WMI_10_4_VDEV_PARAM_PREAMBLE, 4927 WMI_10_4_VDEV_PARAM_SWBA_TIME, 4928 WMI_10_4_VDEV_STATS_UPDATE_PERIOD, 4929 WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME, 4930 WMI_10_4_VDEV_HOST_SWBA_INTERVAL, 4931 WMI_10_4_VDEV_PARAM_DTIM_PERIOD, 4932 WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 4933 WMI_10_4_VDEV_PARAM_WDS, 4934 WMI_10_4_VDEV_PARAM_ATIM_WINDOW, 4935 WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX, 4936 WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT, 4937 WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT, 4938 WMI_10_4_VDEV_PARAM_FEATURE_WMM, 4939 WMI_10_4_VDEV_PARAM_CHWIDTH, 4940 WMI_10_4_VDEV_PARAM_CHEXTOFFSET, 4941 WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION, 4942 WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT, 4943 WMI_10_4_VDEV_PARAM_MGMT_RATE, 4944 WMI_10_4_VDEV_PARAM_PROTECTION_MODE, 4945 WMI_10_4_VDEV_PARAM_FIXED_RATE, 4946 WMI_10_4_VDEV_PARAM_SGI, 4947 WMI_10_4_VDEV_PARAM_LDPC, 4948 WMI_10_4_VDEV_PARAM_TX_STBC, 4949 WMI_10_4_VDEV_PARAM_RX_STBC, 4950 WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD, 4951 WMI_10_4_VDEV_PARAM_DEF_KEYID, 4952 WMI_10_4_VDEV_PARAM_NSS, 4953 WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE, 4954 WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE, 4955 WMI_10_4_VDEV_PARAM_MCAST_INDICATE, 4956 WMI_10_4_VDEV_PARAM_DHCP_INDICATE, 4957 WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 4958 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 4959 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 4960 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 4961 WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS, 4962 WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET, 4963 WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS, 4964 WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES, 4965 WMI_10_4_VDEV_PARAM_TXBF, 4966 WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE, 4967 WMI_10_4_VDEV_PARAM_DROP_UNENCRY, 4968 WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE, 4969 WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 4970 WMI_10_4_VDEV_PARAM_CABQ_MAXDUR, 4971 WMI_10_4_VDEV_PARAM_MFPTEST_SET, 4972 WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE, 4973 WMI_10_4_VDEV_PARAM_VHT_SGIMASK, 4974 WMI_10_4_VDEV_PARAM_VHT80_RATEMASK, 4975 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE, 4976 WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM, 4977 WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE, 4978 WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP, 4979 WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP, 4980 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE, 4981 WMI_10_4_VDEV_PARAM_PROXY_STA, 4982 WMI_10_4_VDEV_PARAM_MERU_VC, 4983 WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE, 4984 WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK, 4985 WMI_10_4_VDEV_PARAM_SENSOR_AP, 4986 WMI_10_4_VDEV_PARAM_BEACON_RATE, 4987 WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS, 4988 WMI_10_4_VDEV_PARAM_STA_KICKOUT, 4989 WMI_10_4_VDEV_PARAM_CAPABILITIES, 4990 WMI_10_4_VDEV_PARAM_TSF_INCREMENT, 4991 }; 4992 4993 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0) 4994 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1) 4995 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2) 4996 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3) 4997 4998 #define WMI_TXBF_STS_CAP_OFFSET_LSB 4 4999 #define WMI_TXBF_STS_CAP_OFFSET_MASK 0xf0 5000 #define WMI_BF_SOUND_DIM_OFFSET_LSB 8 5001 #define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00 5002 5003 /* slot time long */ 5004 #define WMI_VDEV_SLOT_TIME_LONG 0x1 5005 /* slot time short */ 5006 #define WMI_VDEV_SLOT_TIME_SHORT 0x2 5007 /* preablbe long */ 5008 #define WMI_VDEV_PREAMBLE_LONG 0x1 5009 /* preablbe short */ 5010 #define WMI_VDEV_PREAMBLE_SHORT 0x2 5011 5012 enum wmi_start_event_param { 5013 WMI_VDEV_RESP_START_EVENT = 0, 5014 WMI_VDEV_RESP_RESTART_EVENT, 5015 }; 5016 5017 struct wmi_vdev_start_response_event { 5018 __le32 vdev_id; 5019 __le32 req_id; 5020 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 5021 __le32 status; 5022 } __packed; 5023 5024 struct wmi_vdev_standby_req_event { 5025 /* unique id identifying the VDEV, generated by the caller */ 5026 __le32 vdev_id; 5027 } __packed; 5028 5029 struct wmi_vdev_resume_req_event { 5030 /* unique id identifying the VDEV, generated by the caller */ 5031 __le32 vdev_id; 5032 } __packed; 5033 5034 struct wmi_vdev_stopped_event { 5035 /* unique id identifying the VDEV, generated by the caller */ 5036 __le32 vdev_id; 5037 } __packed; 5038 5039 /* 5040 * common structure used for simple events 5041 * (stopped, resume_req, standby response) 5042 */ 5043 struct wmi_vdev_simple_event { 5044 /* unique id identifying the VDEV, generated by the caller */ 5045 __le32 vdev_id; 5046 } __packed; 5047 5048 /* VDEV start response status codes */ 5049 /* VDEV succesfully started */ 5050 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 5051 5052 /* requested VDEV not found */ 5053 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1 5054 5055 /* unsupported VDEV combination */ 5056 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2 5057 5058 /* TODO: please add more comments if you have in-depth information */ 5059 struct wmi_vdev_spectral_conf_cmd { 5060 __le32 vdev_id; 5061 5062 /* number of fft samples to send (0 for infinite) */ 5063 __le32 scan_count; 5064 __le32 scan_period; 5065 __le32 scan_priority; 5066 5067 /* number of bins in the FFT: 2^(fft_size - bin_scale) */ 5068 __le32 scan_fft_size; 5069 __le32 scan_gc_ena; 5070 __le32 scan_restart_ena; 5071 __le32 scan_noise_floor_ref; 5072 __le32 scan_init_delay; 5073 __le32 scan_nb_tone_thr; 5074 __le32 scan_str_bin_thr; 5075 __le32 scan_wb_rpt_mode; 5076 __le32 scan_rssi_rpt_mode; 5077 __le32 scan_rssi_thr; 5078 __le32 scan_pwr_format; 5079 5080 /* rpt_mode: Format of FFT report to software for spectral scan 5081 * triggered FFTs: 5082 * 0: No FFT report (only spectral scan summary report) 5083 * 1: 2-dword summary of metrics for each completed FFT + spectral 5084 * scan summary report 5085 * 2: 2-dword summary of metrics for each completed FFT + 5086 * 1x- oversampled bins(in-band) per FFT + spectral scan summary 5087 * report 5088 * 3: 2-dword summary of metrics for each completed FFT + 5089 * 2x- oversampled bins (all) per FFT + spectral scan summary 5090 */ 5091 __le32 scan_rpt_mode; 5092 __le32 scan_bin_scale; 5093 __le32 scan_dbm_adj; 5094 __le32 scan_chn_mask; 5095 } __packed; 5096 5097 struct wmi_vdev_spectral_conf_arg { 5098 u32 vdev_id; 5099 u32 scan_count; 5100 u32 scan_period; 5101 u32 scan_priority; 5102 u32 scan_fft_size; 5103 u32 scan_gc_ena; 5104 u32 scan_restart_ena; 5105 u32 scan_noise_floor_ref; 5106 u32 scan_init_delay; 5107 u32 scan_nb_tone_thr; 5108 u32 scan_str_bin_thr; 5109 u32 scan_wb_rpt_mode; 5110 u32 scan_rssi_rpt_mode; 5111 u32 scan_rssi_thr; 5112 u32 scan_pwr_format; 5113 u32 scan_rpt_mode; 5114 u32 scan_bin_scale; 5115 u32 scan_dbm_adj; 5116 u32 scan_chn_mask; 5117 }; 5118 5119 #define WMI_SPECTRAL_ENABLE_DEFAULT 0 5120 #define WMI_SPECTRAL_COUNT_DEFAULT 0 5121 #define WMI_SPECTRAL_PERIOD_DEFAULT 35 5122 #define WMI_SPECTRAL_PRIORITY_DEFAULT 1 5123 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7 5124 #define WMI_SPECTRAL_GC_ENA_DEFAULT 1 5125 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0 5126 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96 5127 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80 5128 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12 5129 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8 5130 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0 5131 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0 5132 #define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0 5133 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0 5134 #define WMI_SPECTRAL_RPT_MODE_DEFAULT 2 5135 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1 5136 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1 5137 #define WMI_SPECTRAL_CHN_MASK_DEFAULT 1 5138 5139 struct wmi_vdev_spectral_enable_cmd { 5140 __le32 vdev_id; 5141 __le32 trigger_cmd; 5142 __le32 enable_cmd; 5143 } __packed; 5144 5145 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1 5146 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2 5147 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1 5148 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2 5149 5150 /* Beacon processing related command and event structures */ 5151 struct wmi_bcn_tx_hdr { 5152 __le32 vdev_id; 5153 __le32 tx_rate; 5154 __le32 tx_power; 5155 __le32 bcn_len; 5156 } __packed; 5157 5158 struct wmi_bcn_tx_cmd { 5159 struct wmi_bcn_tx_hdr hdr; 5160 u8 *bcn[0]; 5161 } __packed; 5162 5163 struct wmi_bcn_tx_arg { 5164 u32 vdev_id; 5165 u32 tx_rate; 5166 u32 tx_power; 5167 u32 bcn_len; 5168 const void *bcn; 5169 }; 5170 5171 enum wmi_bcn_tx_ref_flags { 5172 WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1, 5173 WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2, 5174 }; 5175 5176 /* TODO: It is unclear why "no antenna" works while any other seemingly valid 5177 * chainmask yields no beacons on the air at all. 5178 */ 5179 #define WMI_BCN_TX_REF_DEF_ANTENNA 0 5180 5181 struct wmi_bcn_tx_ref_cmd { 5182 __le32 vdev_id; 5183 __le32 data_len; 5184 /* physical address of the frame - dma pointer */ 5185 __le32 data_ptr; 5186 /* id for host to track */ 5187 __le32 msdu_id; 5188 /* frame ctrl to setup PPDU desc */ 5189 __le32 frame_control; 5190 /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */ 5191 __le32 flags; 5192 /* introduced in 10.2 */ 5193 __le32 antenna_mask; 5194 } __packed; 5195 5196 /* Beacon filter */ 5197 #define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */ 5198 #define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */ 5199 #define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */ 5200 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */ 5201 #define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */ 5202 5203 struct wmi_bcn_filter_rx_cmd { 5204 /* Filter ID */ 5205 __le32 bcn_filter_id; 5206 /* Filter type - wmi_bcn_filter */ 5207 __le32 bcn_filter; 5208 /* Buffer len */ 5209 __le32 bcn_filter_len; 5210 /* Filter info (threshold, BSSID, RSSI) */ 5211 u8 *bcn_filter_buf; 5212 } __packed; 5213 5214 /* Capabilities and IEs to be passed to firmware */ 5215 struct wmi_bcn_prb_info { 5216 /* Capabilities */ 5217 __le32 caps; 5218 /* ERP info */ 5219 __le32 erp; 5220 /* Advanced capabilities */ 5221 /* HT capabilities */ 5222 /* HT Info */ 5223 /* ibss_dfs */ 5224 /* wpa Info */ 5225 /* rsn Info */ 5226 /* rrm info */ 5227 /* ath_ext */ 5228 /* app IE */ 5229 } __packed; 5230 5231 struct wmi_bcn_tmpl_cmd { 5232 /* unique id identifying the VDEV, generated by the caller */ 5233 __le32 vdev_id; 5234 /* TIM IE offset from the beginning of the template. */ 5235 __le32 tim_ie_offset; 5236 /* beacon probe capabilities and IEs */ 5237 struct wmi_bcn_prb_info bcn_prb_info; 5238 /* beacon buffer length */ 5239 __le32 buf_len; 5240 /* variable length data */ 5241 u8 data[1]; 5242 } __packed; 5243 5244 struct wmi_prb_tmpl_cmd { 5245 /* unique id identifying the VDEV, generated by the caller */ 5246 __le32 vdev_id; 5247 /* beacon probe capabilities and IEs */ 5248 struct wmi_bcn_prb_info bcn_prb_info; 5249 /* beacon buffer length */ 5250 __le32 buf_len; 5251 /* Variable length data */ 5252 u8 data[1]; 5253 } __packed; 5254 5255 enum wmi_sta_ps_mode { 5256 /* enable power save for the given STA VDEV */ 5257 WMI_STA_PS_MODE_DISABLED = 0, 5258 /* disable power save for a given STA VDEV */ 5259 WMI_STA_PS_MODE_ENABLED = 1, 5260 }; 5261 5262 struct wmi_sta_powersave_mode_cmd { 5263 /* unique id identifying the VDEV, generated by the caller */ 5264 __le32 vdev_id; 5265 5266 /* 5267 * Power save mode 5268 * (see enum wmi_sta_ps_mode) 5269 */ 5270 __le32 sta_ps_mode; 5271 } __packed; 5272 5273 enum wmi_csa_offload_en { 5274 WMI_CSA_OFFLOAD_DISABLE = 0, 5275 WMI_CSA_OFFLOAD_ENABLE = 1, 5276 }; 5277 5278 struct wmi_csa_offload_enable_cmd { 5279 __le32 vdev_id; 5280 __le32 csa_offload_enable; 5281 } __packed; 5282 5283 struct wmi_csa_offload_chanswitch_cmd { 5284 __le32 vdev_id; 5285 struct wmi_channel chan; 5286 } __packed; 5287 5288 /* 5289 * This parameter controls the policy for retrieving frames from AP while the 5290 * STA is in sleep state. 5291 * 5292 * Only takes affect if the sta_ps_mode is enabled 5293 */ 5294 enum wmi_sta_ps_param_rx_wake_policy { 5295 /* 5296 * Wake up when ever there is an RX activity on the VDEV. In this mode 5297 * the Power save SM(state machine) will come out of sleep by either 5298 * sending null frame (or) a data frame (with PS==0) in response to TIM 5299 * bit set in the received beacon frame from AP. 5300 */ 5301 WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0, 5302 5303 /* 5304 * Here the power save state machine will not wakeup in response to TIM 5305 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD 5306 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all 5307 * access categories are delivery-enabled, the station will send a 5308 * UAPSD trigger frame, otherwise it will send a PS-Poll. 5309 */ 5310 WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, 5311 }; 5312 5313 /* 5314 * Number of tx frames/beacon that cause the power save SM to wake up. 5315 * 5316 * Value 1 causes the SM to wake up for every TX. Value 0 has a special 5317 * meaning, It will cause the SM to never wake up. This is useful if you want 5318 * to keep the system to sleep all the time for some kind of test mode . host 5319 * can change this parameter any time. It will affect at the next tx frame. 5320 */ 5321 enum wmi_sta_ps_param_tx_wake_threshold { 5322 WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, 5323 WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, 5324 5325 /* 5326 * Values greater than one indicate that many TX attempts per beacon 5327 * interval before the STA will wake up 5328 */ 5329 }; 5330 5331 /* 5332 * The maximum number of PS-Poll frames the FW will send in response to 5333 * traffic advertised in TIM before waking up (by sending a null frame with PS 5334 * = 0). Value 0 has a special meaning: there is no maximum count and the FW 5335 * will send as many PS-Poll as are necessary to retrieve buffered BU. This 5336 * parameter is used when the RX wake policy is 5337 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake 5338 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE. 5339 */ 5340 enum wmi_sta_ps_param_pspoll_count { 5341 WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0, 5342 /* 5343 * Values greater than 0 indicate the maximum numer of PS-Poll frames 5344 * FW will send before waking up. 5345 */ 5346 5347 /* When u-APSD is enabled the firmware will be very reluctant to exit 5348 * STA PS. This could result in very poor Rx performance with STA doing 5349 * PS-Poll for each and every buffered frame. This value is a bit 5350 * arbitrary. 5351 */ 5352 WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3, 5353 }; 5354 5355 /* 5356 * This will include the delivery and trigger enabled state for every AC. 5357 * This is the negotiated state with AP. The host MLME needs to set this based 5358 * on AP capability and the state Set in the association request by the 5359 * station MLME.Lower 8 bits of the value specify the UAPSD configuration. 5360 */ 5361 #define WMI_UAPSD_AC_TYPE_DELI 0 5362 #define WMI_UAPSD_AC_TYPE_TRIG 1 5363 5364 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \ 5365 ((type == WMI_UAPSD_AC_TYPE_DELI) ? (1 << (ac << 1)) : (1 << ((ac << 1) + 1))) 5366 5367 enum wmi_sta_ps_param_uapsd { 5368 WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5369 WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5370 WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5371 WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5372 WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5373 WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5374 WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5375 WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5376 }; 5377 5378 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX 5379 5380 struct wmi_sta_uapsd_auto_trig_param { 5381 __le32 wmm_ac; 5382 __le32 user_priority; 5383 __le32 service_interval; 5384 __le32 suspend_interval; 5385 __le32 delay_interval; 5386 }; 5387 5388 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param { 5389 __le32 vdev_id; 5390 struct wmi_mac_addr peer_macaddr; 5391 __le32 num_ac; 5392 }; 5393 5394 struct wmi_sta_uapsd_auto_trig_arg { 5395 u32 wmm_ac; 5396 u32 user_priority; 5397 u32 service_interval; 5398 u32 suspend_interval; 5399 u32 delay_interval; 5400 }; 5401 5402 enum wmi_sta_powersave_param { 5403 /* 5404 * Controls how frames are retrievd from AP while STA is sleeping 5405 * 5406 * (see enum wmi_sta_ps_param_rx_wake_policy) 5407 */ 5408 WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0, 5409 5410 /* 5411 * The STA will go active after this many TX 5412 * 5413 * (see enum wmi_sta_ps_param_tx_wake_threshold) 5414 */ 5415 WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, 5416 5417 /* 5418 * Number of PS-Poll to send before STA wakes up 5419 * 5420 * (see enum wmi_sta_ps_param_pspoll_count) 5421 * 5422 */ 5423 WMI_STA_PS_PARAM_PSPOLL_COUNT = 2, 5424 5425 /* 5426 * TX/RX inactivity time in msec before going to sleep. 5427 * 5428 * The power save SM will monitor tx/rx activity on the VDEV, if no 5429 * activity for the specified msec of the parameter the Power save 5430 * SM will go to sleep. 5431 */ 5432 WMI_STA_PS_PARAM_INACTIVITY_TIME = 3, 5433 5434 /* 5435 * Set uapsd configuration. 5436 * 5437 * (see enum wmi_sta_ps_param_uapsd) 5438 */ 5439 WMI_STA_PS_PARAM_UAPSD = 4, 5440 }; 5441 5442 struct wmi_sta_powersave_param_cmd { 5443 __le32 vdev_id; 5444 __le32 param_id; /* %WMI_STA_PS_PARAM_ */ 5445 __le32 param_value; 5446 } __packed; 5447 5448 /* No MIMO power save */ 5449 #define WMI_STA_MIMO_PS_MODE_DISABLE 5450 /* mimo powersave mode static*/ 5451 #define WMI_STA_MIMO_PS_MODE_STATIC 5452 /* mimo powersave mode dynamic */ 5453 #define WMI_STA_MIMO_PS_MODE_DYNAMIC 5454 5455 struct wmi_sta_mimo_ps_mode_cmd { 5456 /* unique id identifying the VDEV, generated by the caller */ 5457 __le32 vdev_id; 5458 /* mimo powersave mode as defined above */ 5459 __le32 mimo_pwrsave_mode; 5460 } __packed; 5461 5462 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */ 5463 enum wmi_ap_ps_param_uapsd { 5464 WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5465 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5466 WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5467 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5468 WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5469 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5470 WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5471 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5472 }; 5473 5474 /* U-APSD maximum service period of peer station */ 5475 enum wmi_ap_ps_peer_param_max_sp { 5476 WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, 5477 WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1, 5478 WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2, 5479 WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3, 5480 MAX_WMI_AP_PS_PEER_PARAM_MAX_SP, 5481 }; 5482 5483 /* 5484 * AP power save parameter 5485 * Set a power save specific parameter for a peer station 5486 */ 5487 enum wmi_ap_ps_peer_param { 5488 /* Set uapsd configuration for a given peer. 5489 * 5490 * Include the delivery and trigger enabled state for every AC. 5491 * The host MLME needs to set this based on AP capability and stations 5492 * request Set in the association request received from the station. 5493 * 5494 * Lower 8 bits of the value specify the UAPSD configuration. 5495 * 5496 * (see enum wmi_ap_ps_param_uapsd) 5497 * The default value is 0. 5498 */ 5499 WMI_AP_PS_PEER_PARAM_UAPSD = 0, 5500 5501 /* 5502 * Set the service period for a UAPSD capable station 5503 * 5504 * The service period from wme ie in the (re)assoc request frame. 5505 * 5506 * (see enum wmi_ap_ps_peer_param_max_sp) 5507 */ 5508 WMI_AP_PS_PEER_PARAM_MAX_SP = 1, 5509 5510 /* Time in seconds for aging out buffered frames for STA in PS */ 5511 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, 5512 }; 5513 5514 struct wmi_ap_ps_peer_cmd { 5515 /* unique id identifying the VDEV, generated by the caller */ 5516 __le32 vdev_id; 5517 5518 /* peer MAC address */ 5519 struct wmi_mac_addr peer_macaddr; 5520 5521 /* AP powersave param (see enum wmi_ap_ps_peer_param) */ 5522 __le32 param_id; 5523 5524 /* AP powersave param value */ 5525 __le32 param_value; 5526 } __packed; 5527 5528 /* 128 clients = 4 words */ 5529 #define WMI_TIM_BITMAP_ARRAY_SIZE 4 5530 5531 struct wmi_tim_info { 5532 __le32 tim_len; 5533 __le32 tim_mcast; 5534 __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE]; 5535 __le32 tim_changed; 5536 __le32 tim_num_ps_pending; 5537 } __packed; 5538 5539 struct wmi_tim_info_arg { 5540 __le32 tim_len; 5541 __le32 tim_mcast; 5542 const __le32 *tim_bitmap; 5543 __le32 tim_changed; 5544 __le32 tim_num_ps_pending; 5545 } __packed; 5546 5547 /* Maximum number of NOA Descriptors supported */ 5548 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4 5549 #define WMI_P2P_OPPPS_ENABLE_BIT BIT(0) 5550 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1 5551 #define WMI_P2P_NOA_CHANGED_BIT BIT(0) 5552 5553 struct wmi_p2p_noa_info { 5554 /* Bit 0 - Flag to indicate an update in NOA schedule 5555 Bits 7-1 - Reserved */ 5556 u8 changed; 5557 /* NOA index */ 5558 u8 index; 5559 /* Bit 0 - Opp PS state of the AP 5560 Bits 1-7 - Ctwindow in TUs */ 5561 u8 ctwindow_oppps; 5562 /* Number of NOA descriptors */ 5563 u8 num_descriptors; 5564 5565 struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS]; 5566 } __packed; 5567 5568 struct wmi_bcn_info { 5569 struct wmi_tim_info tim_info; 5570 struct wmi_p2p_noa_info p2p_noa_info; 5571 } __packed; 5572 5573 struct wmi_host_swba_event { 5574 __le32 vdev_map; 5575 struct wmi_bcn_info bcn_info[0]; 5576 } __packed; 5577 5578 struct wmi_10_2_4_bcn_info { 5579 struct wmi_tim_info tim_info; 5580 /* The 10.2.4 FW doesn't have p2p NOA info */ 5581 } __packed; 5582 5583 struct wmi_10_2_4_host_swba_event { 5584 __le32 vdev_map; 5585 struct wmi_10_2_4_bcn_info bcn_info[0]; 5586 } __packed; 5587 5588 /* 16 words = 512 client + 1 word = for guard */ 5589 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17 5590 5591 struct wmi_10_4_tim_info { 5592 __le32 tim_len; 5593 __le32 tim_mcast; 5594 __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE]; 5595 __le32 tim_changed; 5596 __le32 tim_num_ps_pending; 5597 } __packed; 5598 5599 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1 5600 5601 struct wmi_10_4_p2p_noa_info { 5602 /* Bit 0 - Flag to indicate an update in NOA schedule 5603 * Bits 7-1 - Reserved 5604 */ 5605 u8 changed; 5606 /* NOA index */ 5607 u8 index; 5608 /* Bit 0 - Opp PS state of the AP 5609 * Bits 1-7 - Ctwindow in TUs 5610 */ 5611 u8 ctwindow_oppps; 5612 /* Number of NOA descriptors */ 5613 u8 num_descriptors; 5614 5615 struct wmi_p2p_noa_descriptor 5616 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS]; 5617 } __packed; 5618 5619 struct wmi_10_4_bcn_info { 5620 struct wmi_10_4_tim_info tim_info; 5621 struct wmi_10_4_p2p_noa_info p2p_noa_info; 5622 } __packed; 5623 5624 struct wmi_10_4_host_swba_event { 5625 __le32 vdev_map; 5626 struct wmi_10_4_bcn_info bcn_info[0]; 5627 } __packed; 5628 5629 #define WMI_MAX_AP_VDEV 16 5630 5631 struct wmi_tbtt_offset_event { 5632 __le32 vdev_map; 5633 __le32 tbttoffset_list[WMI_MAX_AP_VDEV]; 5634 } __packed; 5635 5636 struct wmi_peer_create_cmd { 5637 __le32 vdev_id; 5638 struct wmi_mac_addr peer_macaddr; 5639 } __packed; 5640 5641 enum wmi_peer_type { 5642 WMI_PEER_TYPE_DEFAULT = 0, 5643 WMI_PEER_TYPE_BSS = 1, 5644 WMI_PEER_TYPE_TDLS = 2, 5645 }; 5646 5647 struct wmi_peer_delete_cmd { 5648 __le32 vdev_id; 5649 struct wmi_mac_addr peer_macaddr; 5650 } __packed; 5651 5652 struct wmi_peer_flush_tids_cmd { 5653 __le32 vdev_id; 5654 struct wmi_mac_addr peer_macaddr; 5655 __le32 peer_tid_bitmap; 5656 } __packed; 5657 5658 struct wmi_fixed_rate { 5659 /* 5660 * rate mode . 0: disable fixed rate (auto rate) 5661 * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps 5662 * 2: ht20 11n rate specified as mcs index 5663 * 3: ht40 11n rate specified as mcs index 5664 */ 5665 __le32 rate_mode; 5666 /* 5667 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB) 5668 * and series 3 is stored at byte 3 (MSB) 5669 */ 5670 __le32 rate_series; 5671 /* 5672 * 4 retry counts for 4 rate series. retry count for rate 0 is stored 5673 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3 5674 * (MSB) 5675 */ 5676 __le32 rate_retries; 5677 } __packed; 5678 5679 struct wmi_peer_fixed_rate_cmd { 5680 /* unique id identifying the VDEV, generated by the caller */ 5681 __le32 vdev_id; 5682 /* peer MAC address */ 5683 struct wmi_mac_addr peer_macaddr; 5684 /* fixed rate */ 5685 struct wmi_fixed_rate peer_fixed_rate; 5686 } __packed; 5687 5688 #define WMI_MGMT_TID 17 5689 5690 struct wmi_addba_clear_resp_cmd { 5691 /* unique id identifying the VDEV, generated by the caller */ 5692 __le32 vdev_id; 5693 /* peer MAC address */ 5694 struct wmi_mac_addr peer_macaddr; 5695 } __packed; 5696 5697 struct wmi_addba_send_cmd { 5698 /* unique id identifying the VDEV, generated by the caller */ 5699 __le32 vdev_id; 5700 /* peer MAC address */ 5701 struct wmi_mac_addr peer_macaddr; 5702 /* Tid number */ 5703 __le32 tid; 5704 /* Buffer/Window size*/ 5705 __le32 buffersize; 5706 } __packed; 5707 5708 struct wmi_delba_send_cmd { 5709 /* unique id identifying the VDEV, generated by the caller */ 5710 __le32 vdev_id; 5711 /* peer MAC address */ 5712 struct wmi_mac_addr peer_macaddr; 5713 /* Tid number */ 5714 __le32 tid; 5715 /* Is Initiator */ 5716 __le32 initiator; 5717 /* Reason code */ 5718 __le32 reasoncode; 5719 } __packed; 5720 5721 struct wmi_addba_setresponse_cmd { 5722 /* unique id identifying the vdev, generated by the caller */ 5723 __le32 vdev_id; 5724 /* peer mac address */ 5725 struct wmi_mac_addr peer_macaddr; 5726 /* Tid number */ 5727 __le32 tid; 5728 /* status code */ 5729 __le32 statuscode; 5730 } __packed; 5731 5732 struct wmi_send_singleamsdu_cmd { 5733 /* unique id identifying the vdev, generated by the caller */ 5734 __le32 vdev_id; 5735 /* peer mac address */ 5736 struct wmi_mac_addr peer_macaddr; 5737 /* Tid number */ 5738 __le32 tid; 5739 } __packed; 5740 5741 enum wmi_peer_smps_state { 5742 WMI_PEER_SMPS_PS_NONE = 0x0, 5743 WMI_PEER_SMPS_STATIC = 0x1, 5744 WMI_PEER_SMPS_DYNAMIC = 0x2 5745 }; 5746 5747 enum wmi_peer_chwidth { 5748 WMI_PEER_CHWIDTH_20MHZ = 0, 5749 WMI_PEER_CHWIDTH_40MHZ = 1, 5750 WMI_PEER_CHWIDTH_80MHZ = 2, 5751 }; 5752 5753 enum wmi_peer_param { 5754 WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */ 5755 WMI_PEER_AMPDU = 0x2, 5756 WMI_PEER_AUTHORIZE = 0x3, 5757 WMI_PEER_CHAN_WIDTH = 0x4, 5758 WMI_PEER_NSS = 0x5, 5759 WMI_PEER_USE_4ADDR = 0x6, 5760 WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */ 5761 }; 5762 5763 struct wmi_peer_set_param_cmd { 5764 __le32 vdev_id; 5765 struct wmi_mac_addr peer_macaddr; 5766 __le32 param_id; 5767 __le32 param_value; 5768 } __packed; 5769 5770 #define MAX_SUPPORTED_RATES 128 5771 5772 struct wmi_rate_set { 5773 /* total number of rates */ 5774 __le32 num_rates; 5775 /* 5776 * rates (each 8bit value) packed into a 32 bit word. 5777 * the rates are filled from least significant byte to most 5778 * significant byte. 5779 */ 5780 __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1]; 5781 } __packed; 5782 5783 struct wmi_rate_set_arg { 5784 unsigned int num_rates; 5785 u8 rates[MAX_SUPPORTED_RATES]; 5786 }; 5787 5788 /* 5789 * NOTE: It would bea good idea to represent the Tx MCS 5790 * info in one word and Rx in another word. This is split 5791 * into multiple words for convenience 5792 */ 5793 struct wmi_vht_rate_set { 5794 __le32 rx_max_rate; /* Max Rx data rate */ 5795 __le32 rx_mcs_set; /* Negotiated RX VHT rates */ 5796 __le32 tx_max_rate; /* Max Tx data rate */ 5797 __le32 tx_mcs_set; /* Negotiated TX VHT rates */ 5798 } __packed; 5799 5800 struct wmi_vht_rate_set_arg { 5801 u32 rx_max_rate; 5802 u32 rx_mcs_set; 5803 u32 tx_max_rate; 5804 u32 tx_mcs_set; 5805 }; 5806 5807 struct wmi_peer_set_rates_cmd { 5808 /* peer MAC address */ 5809 struct wmi_mac_addr peer_macaddr; 5810 /* legacy rate set */ 5811 struct wmi_rate_set peer_legacy_rates; 5812 /* ht rate set */ 5813 struct wmi_rate_set peer_ht_rates; 5814 } __packed; 5815 5816 struct wmi_peer_set_q_empty_callback_cmd { 5817 /* unique id identifying the VDEV, generated by the caller */ 5818 __le32 vdev_id; 5819 /* peer MAC address */ 5820 struct wmi_mac_addr peer_macaddr; 5821 __le32 callback_enable; 5822 } __packed; 5823 5824 struct wmi_peer_flags_map { 5825 u32 auth; 5826 u32 qos; 5827 u32 need_ptk_4_way; 5828 u32 need_gtk_2_way; 5829 u32 apsd; 5830 u32 ht; 5831 u32 bw40; 5832 u32 stbc; 5833 u32 ldbc; 5834 u32 dyn_mimops; 5835 u32 static_mimops; 5836 u32 spatial_mux; 5837 u32 vht; 5838 u32 bw80; 5839 u32 vht_2g; 5840 u32 pmf; 5841 }; 5842 5843 enum wmi_peer_flags { 5844 WMI_PEER_AUTH = 0x00000001, 5845 WMI_PEER_QOS = 0x00000002, 5846 WMI_PEER_NEED_PTK_4_WAY = 0x00000004, 5847 WMI_PEER_NEED_GTK_2_WAY = 0x00000010, 5848 WMI_PEER_APSD = 0x00000800, 5849 WMI_PEER_HT = 0x00001000, 5850 WMI_PEER_40MHZ = 0x00002000, 5851 WMI_PEER_STBC = 0x00008000, 5852 WMI_PEER_LDPC = 0x00010000, 5853 WMI_PEER_DYN_MIMOPS = 0x00020000, 5854 WMI_PEER_STATIC_MIMOPS = 0x00040000, 5855 WMI_PEER_SPATIAL_MUX = 0x00200000, 5856 WMI_PEER_VHT = 0x02000000, 5857 WMI_PEER_80MHZ = 0x04000000, 5858 WMI_PEER_VHT_2G = 0x08000000, 5859 WMI_PEER_PMF = 0x10000000, 5860 }; 5861 5862 enum wmi_10x_peer_flags { 5863 WMI_10X_PEER_AUTH = 0x00000001, 5864 WMI_10X_PEER_QOS = 0x00000002, 5865 WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004, 5866 WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010, 5867 WMI_10X_PEER_APSD = 0x00000800, 5868 WMI_10X_PEER_HT = 0x00001000, 5869 WMI_10X_PEER_40MHZ = 0x00002000, 5870 WMI_10X_PEER_STBC = 0x00008000, 5871 WMI_10X_PEER_LDPC = 0x00010000, 5872 WMI_10X_PEER_DYN_MIMOPS = 0x00020000, 5873 WMI_10X_PEER_STATIC_MIMOPS = 0x00040000, 5874 WMI_10X_PEER_SPATIAL_MUX = 0x00200000, 5875 WMI_10X_PEER_VHT = 0x02000000, 5876 WMI_10X_PEER_80MHZ = 0x04000000, 5877 }; 5878 5879 enum wmi_10_2_peer_flags { 5880 WMI_10_2_PEER_AUTH = 0x00000001, 5881 WMI_10_2_PEER_QOS = 0x00000002, 5882 WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004, 5883 WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010, 5884 WMI_10_2_PEER_APSD = 0x00000800, 5885 WMI_10_2_PEER_HT = 0x00001000, 5886 WMI_10_2_PEER_40MHZ = 0x00002000, 5887 WMI_10_2_PEER_STBC = 0x00008000, 5888 WMI_10_2_PEER_LDPC = 0x00010000, 5889 WMI_10_2_PEER_DYN_MIMOPS = 0x00020000, 5890 WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000, 5891 WMI_10_2_PEER_SPATIAL_MUX = 0x00200000, 5892 WMI_10_2_PEER_VHT = 0x02000000, 5893 WMI_10_2_PEER_80MHZ = 0x04000000, 5894 WMI_10_2_PEER_VHT_2G = 0x08000000, 5895 WMI_10_2_PEER_PMF = 0x10000000, 5896 }; 5897 5898 /* 5899 * Peer rate capabilities. 5900 * 5901 * This is of interest to the ratecontrol 5902 * module which resides in the firmware. The bit definitions are 5903 * consistent with that defined in if_athrate.c. 5904 */ 5905 #define WMI_RC_DS_FLAG 0x01 5906 #define WMI_RC_CW40_FLAG 0x02 5907 #define WMI_RC_SGI_FLAG 0x04 5908 #define WMI_RC_HT_FLAG 0x08 5909 #define WMI_RC_RTSCTS_FLAG 0x10 5910 #define WMI_RC_TX_STBC_FLAG 0x20 5911 #define WMI_RC_RX_STBC_FLAG 0xC0 5912 #define WMI_RC_RX_STBC_FLAG_S 6 5913 #define WMI_RC_WEP_TKIP_FLAG 0x100 5914 #define WMI_RC_TS_FLAG 0x200 5915 #define WMI_RC_UAPSD_FLAG 0x400 5916 5917 /* Maximum listen interval supported by hw in units of beacon interval */ 5918 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5 5919 5920 struct wmi_common_peer_assoc_complete_cmd { 5921 struct wmi_mac_addr peer_macaddr; 5922 __le32 vdev_id; 5923 __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */ 5924 __le32 peer_associd; /* 16 LSBs */ 5925 __le32 peer_flags; 5926 __le32 peer_caps; /* 16 LSBs */ 5927 __le32 peer_listen_intval; 5928 __le32 peer_ht_caps; 5929 __le32 peer_max_mpdu; 5930 __le32 peer_mpdu_density; /* 0..16 */ 5931 __le32 peer_rate_caps; 5932 struct wmi_rate_set peer_legacy_rates; 5933 struct wmi_rate_set peer_ht_rates; 5934 __le32 peer_nss; /* num of spatial streams */ 5935 __le32 peer_vht_caps; 5936 __le32 peer_phymode; 5937 struct wmi_vht_rate_set peer_vht_rates; 5938 }; 5939 5940 struct wmi_main_peer_assoc_complete_cmd { 5941 struct wmi_common_peer_assoc_complete_cmd cmd; 5942 5943 /* HT Operation Element of the peer. Five bytes packed in 2 5944 * INT32 array and filled from lsb to msb. */ 5945 __le32 peer_ht_info[2]; 5946 } __packed; 5947 5948 struct wmi_10_1_peer_assoc_complete_cmd { 5949 struct wmi_common_peer_assoc_complete_cmd cmd; 5950 } __packed; 5951 5952 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0 5953 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f 5954 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4 5955 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0 5956 5957 struct wmi_10_2_peer_assoc_complete_cmd { 5958 struct wmi_common_peer_assoc_complete_cmd cmd; 5959 __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */ 5960 } __packed; 5961 5962 struct wmi_10_4_peer_assoc_complete_cmd { 5963 struct wmi_10_2_peer_assoc_complete_cmd cmd; 5964 __le32 peer_bw_rxnss_override; 5965 } __packed; 5966 5967 struct wmi_peer_assoc_complete_arg { 5968 u8 addr[ETH_ALEN]; 5969 u32 vdev_id; 5970 bool peer_reassoc; 5971 u16 peer_aid; 5972 u32 peer_flags; /* see %WMI_PEER_ */ 5973 u16 peer_caps; 5974 u32 peer_listen_intval; 5975 u32 peer_ht_caps; 5976 u32 peer_max_mpdu; 5977 u32 peer_mpdu_density; /* 0..16 */ 5978 u32 peer_rate_caps; /* see %WMI_RC_ */ 5979 struct wmi_rate_set_arg peer_legacy_rates; 5980 struct wmi_rate_set_arg peer_ht_rates; 5981 u32 peer_num_spatial_streams; 5982 u32 peer_vht_caps; 5983 enum wmi_phy_mode peer_phymode; 5984 struct wmi_vht_rate_set_arg peer_vht_rates; 5985 }; 5986 5987 struct wmi_peer_add_wds_entry_cmd { 5988 /* peer MAC address */ 5989 struct wmi_mac_addr peer_macaddr; 5990 /* wds MAC addr */ 5991 struct wmi_mac_addr wds_macaddr; 5992 } __packed; 5993 5994 struct wmi_peer_remove_wds_entry_cmd { 5995 /* wds MAC addr */ 5996 struct wmi_mac_addr wds_macaddr; 5997 } __packed; 5998 5999 struct wmi_peer_q_empty_callback_event { 6000 /* peer MAC address */ 6001 struct wmi_mac_addr peer_macaddr; 6002 } __packed; 6003 6004 /* 6005 * Channel info WMI event 6006 */ 6007 struct wmi_chan_info_event { 6008 __le32 err_code; 6009 __le32 freq; 6010 __le32 cmd_flags; 6011 __le32 noise_floor; 6012 __le32 rx_clear_count; 6013 __le32 cycle_count; 6014 } __packed; 6015 6016 struct wmi_10_4_chan_info_event { 6017 __le32 err_code; 6018 __le32 freq; 6019 __le32 cmd_flags; 6020 __le32 noise_floor; 6021 __le32 rx_clear_count; 6022 __le32 cycle_count; 6023 __le32 chan_tx_pwr_range; 6024 __le32 chan_tx_pwr_tp; 6025 __le32 rx_frame_count; 6026 } __packed; 6027 6028 struct wmi_peer_sta_kickout_event { 6029 struct wmi_mac_addr peer_macaddr; 6030 } __packed; 6031 6032 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0) 6033 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1) 6034 6035 /* Beacon filter wmi command info */ 6036 #define BCN_FLT_MAX_SUPPORTED_IES 256 6037 #define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32) 6038 6039 struct bss_bcn_stats { 6040 __le32 vdev_id; 6041 __le32 bss_bcnsdropped; 6042 __le32 bss_bcnsdelivered; 6043 } __packed; 6044 6045 struct bcn_filter_stats { 6046 __le32 bcns_dropped; 6047 __le32 bcns_delivered; 6048 __le32 activefilters; 6049 struct bss_bcn_stats bss_stats; 6050 } __packed; 6051 6052 struct wmi_add_bcn_filter_cmd { 6053 u32 vdev_id; 6054 u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST]; 6055 } __packed; 6056 6057 enum wmi_sta_keepalive_method { 6058 WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1, 6059 WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2, 6060 }; 6061 6062 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0 6063 6064 /* Firmware crashes if keepalive interval exceeds this limit */ 6065 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff 6066 6067 /* note: ip4 addresses are in network byte order, i.e. big endian */ 6068 struct wmi_sta_keepalive_arp_resp { 6069 __be32 src_ip4_addr; 6070 __be32 dest_ip4_addr; 6071 struct wmi_mac_addr dest_mac_addr; 6072 } __packed; 6073 6074 struct wmi_sta_keepalive_cmd { 6075 __le32 vdev_id; 6076 __le32 enabled; 6077 __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */ 6078 __le32 interval; /* in seconds */ 6079 struct wmi_sta_keepalive_arp_resp arp_resp; 6080 } __packed; 6081 6082 struct wmi_sta_keepalive_arg { 6083 u32 vdev_id; 6084 u32 enabled; 6085 u32 method; 6086 u32 interval; 6087 __be32 src_ip4_addr; 6088 __be32 dest_ip4_addr; 6089 const u8 dest_mac_addr[ETH_ALEN]; 6090 }; 6091 6092 enum wmi_force_fw_hang_type { 6093 WMI_FORCE_FW_HANG_ASSERT = 1, 6094 WMI_FORCE_FW_HANG_NO_DETECT, 6095 WMI_FORCE_FW_HANG_CTRL_EP_FULL, 6096 WMI_FORCE_FW_HANG_EMPTY_POINT, 6097 WMI_FORCE_FW_HANG_STACK_OVERFLOW, 6098 WMI_FORCE_FW_HANG_INFINITE_LOOP, 6099 }; 6100 6101 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF 6102 6103 struct wmi_force_fw_hang_cmd { 6104 __le32 type; 6105 __le32 delay_ms; 6106 } __packed; 6107 6108 enum ath10k_dbglog_level { 6109 ATH10K_DBGLOG_LEVEL_VERBOSE = 0, 6110 ATH10K_DBGLOG_LEVEL_INFO = 1, 6111 ATH10K_DBGLOG_LEVEL_WARN = 2, 6112 ATH10K_DBGLOG_LEVEL_ERR = 3, 6113 }; 6114 6115 /* VAP ids to enable dbglog */ 6116 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0 6117 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff 6118 6119 /* to enable dbglog in the firmware */ 6120 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16 6121 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000 6122 6123 /* timestamp resolution */ 6124 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17 6125 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000 6126 6127 /* number of queued messages before sending them to the host */ 6128 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20 6129 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000 6130 6131 /* 6132 * Log levels to enable. This defines the minimum level to enable, this is 6133 * not a bitmask. See enum ath10k_dbglog_level for the values. 6134 */ 6135 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28 6136 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000 6137 6138 /* 6139 * Note: this is a cleaned up version of a struct firmware uses. For 6140 * example, config_valid was hidden inside an array. 6141 */ 6142 struct wmi_dbglog_cfg_cmd { 6143 /* bitmask to hold mod id config*/ 6144 __le32 module_enable; 6145 6146 /* see ATH10K_DBGLOG_CFG_ */ 6147 __le32 config_enable; 6148 6149 /* mask of module id bits to be changed */ 6150 __le32 module_valid; 6151 6152 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6153 __le32 config_valid; 6154 } __packed; 6155 6156 enum wmi_roam_reason { 6157 WMI_ROAM_REASON_BETTER_AP = 1, 6158 WMI_ROAM_REASON_BEACON_MISS = 2, 6159 WMI_ROAM_REASON_LOW_RSSI = 3, 6160 WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4, 6161 WMI_ROAM_REASON_HO_FAILED = 5, 6162 6163 /* keep last */ 6164 WMI_ROAM_REASON_MAX, 6165 }; 6166 6167 struct wmi_roam_ev { 6168 __le32 vdev_id; 6169 __le32 reason; 6170 } __packed; 6171 6172 #define ATH10K_FRAGMT_THRESHOLD_MIN 540 6173 #define ATH10K_FRAGMT_THRESHOLD_MAX 2346 6174 6175 #define WMI_MAX_EVENT 0x1000 6176 /* Maximum number of pending TXed WMI packets */ 6177 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr) 6178 6179 /* By default disable power save for IBSS */ 6180 #define ATH10K_DEFAULT_ATIM 0 6181 6182 #define WMI_MAX_MEM_REQS 16 6183 6184 struct wmi_scan_ev_arg { 6185 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 6186 __le32 reason; /* %WMI_SCAN_REASON_ */ 6187 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 6188 __le32 scan_req_id; 6189 __le32 scan_id; 6190 __le32 vdev_id; 6191 }; 6192 6193 struct wmi_mgmt_rx_ev_arg { 6194 __le32 channel; 6195 __le32 snr; 6196 __le32 rate; 6197 __le32 phy_mode; 6198 __le32 buf_len; 6199 __le32 status; /* %WMI_RX_STATUS_ */ 6200 struct wmi_mgmt_rx_ext_info ext_info; 6201 }; 6202 6203 struct wmi_ch_info_ev_arg { 6204 __le32 err_code; 6205 __le32 freq; 6206 __le32 cmd_flags; 6207 __le32 noise_floor; 6208 __le32 rx_clear_count; 6209 __le32 cycle_count; 6210 __le32 chan_tx_pwr_range; 6211 __le32 chan_tx_pwr_tp; 6212 __le32 rx_frame_count; 6213 }; 6214 6215 struct wmi_vdev_start_ev_arg { 6216 __le32 vdev_id; 6217 __le32 req_id; 6218 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 6219 __le32 status; 6220 }; 6221 6222 struct wmi_peer_kick_ev_arg { 6223 const u8 *mac_addr; 6224 }; 6225 6226 struct wmi_swba_ev_arg { 6227 __le32 vdev_map; 6228 struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV]; 6229 const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV]; 6230 }; 6231 6232 struct wmi_phyerr_ev_arg { 6233 u32 tsf_timestamp; 6234 u16 freq1; 6235 u16 freq2; 6236 u8 rssi_combined; 6237 u8 chan_width_mhz; 6238 u8 phy_err_code; 6239 u16 nf_chains[4]; 6240 u32 buf_len; 6241 const u8 *buf; 6242 u8 hdr_len; 6243 }; 6244 6245 struct wmi_phyerr_hdr_arg { 6246 u32 num_phyerrs; 6247 u32 tsf_l32; 6248 u32 tsf_u32; 6249 u32 buf_len; 6250 const void *phyerrs; 6251 }; 6252 6253 struct wmi_svc_rdy_ev_arg { 6254 __le32 min_tx_power; 6255 __le32 max_tx_power; 6256 __le32 ht_cap; 6257 __le32 vht_cap; 6258 __le32 sw_ver0; 6259 __le32 sw_ver1; 6260 __le32 fw_build; 6261 __le32 phy_capab; 6262 __le32 num_rf_chains; 6263 __le32 eeprom_rd; 6264 __le32 num_mem_reqs; 6265 const __le32 *service_map; 6266 size_t service_map_len; 6267 const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS]; 6268 }; 6269 6270 struct wmi_rdy_ev_arg { 6271 __le32 sw_version; 6272 __le32 abi_version; 6273 __le32 status; 6274 const u8 *mac_addr; 6275 }; 6276 6277 struct wmi_roam_ev_arg { 6278 __le32 vdev_id; 6279 __le32 reason; 6280 __le32 rssi; 6281 }; 6282 6283 struct wmi_pdev_temperature_event { 6284 /* temperature value in Celcius degree */ 6285 __le32 temperature; 6286 } __packed; 6287 6288 struct wmi_pdev_bss_chan_info_event { 6289 __le32 freq; 6290 __le32 noise_floor; 6291 __le64 cycle_busy; 6292 __le64 cycle_total; 6293 __le64 cycle_tx; 6294 __le64 cycle_rx; 6295 __le64 cycle_rx_bss; 6296 __le32 reserved; 6297 } __packed; 6298 6299 /* WOW structures */ 6300 enum wmi_wow_wakeup_event { 6301 WOW_BMISS_EVENT = 0, 6302 WOW_BETTER_AP_EVENT, 6303 WOW_DEAUTH_RECVD_EVENT, 6304 WOW_MAGIC_PKT_RECVD_EVENT, 6305 WOW_GTK_ERR_EVENT, 6306 WOW_FOURWAY_HSHAKE_EVENT, 6307 WOW_EAPOL_RECVD_EVENT, 6308 WOW_NLO_DETECTED_EVENT, 6309 WOW_DISASSOC_RECVD_EVENT, 6310 WOW_PATTERN_MATCH_EVENT, 6311 WOW_CSA_IE_EVENT, 6312 WOW_PROBE_REQ_WPS_IE_EVENT, 6313 WOW_AUTH_REQ_EVENT, 6314 WOW_ASSOC_REQ_EVENT, 6315 WOW_HTT_EVENT, 6316 WOW_RA_MATCH_EVENT, 6317 WOW_HOST_AUTO_SHUTDOWN_EVENT, 6318 WOW_IOAC_MAGIC_EVENT, 6319 WOW_IOAC_SHORT_EVENT, 6320 WOW_IOAC_EXTEND_EVENT, 6321 WOW_IOAC_TIMER_EVENT, 6322 WOW_DFS_PHYERR_RADAR_EVENT, 6323 WOW_BEACON_EVENT, 6324 WOW_CLIENT_KICKOUT_EVENT, 6325 WOW_EVENT_MAX, 6326 }; 6327 6328 #define C2S(x) case x: return #x 6329 6330 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev) 6331 { 6332 switch (ev) { 6333 C2S(WOW_BMISS_EVENT); 6334 C2S(WOW_BETTER_AP_EVENT); 6335 C2S(WOW_DEAUTH_RECVD_EVENT); 6336 C2S(WOW_MAGIC_PKT_RECVD_EVENT); 6337 C2S(WOW_GTK_ERR_EVENT); 6338 C2S(WOW_FOURWAY_HSHAKE_EVENT); 6339 C2S(WOW_EAPOL_RECVD_EVENT); 6340 C2S(WOW_NLO_DETECTED_EVENT); 6341 C2S(WOW_DISASSOC_RECVD_EVENT); 6342 C2S(WOW_PATTERN_MATCH_EVENT); 6343 C2S(WOW_CSA_IE_EVENT); 6344 C2S(WOW_PROBE_REQ_WPS_IE_EVENT); 6345 C2S(WOW_AUTH_REQ_EVENT); 6346 C2S(WOW_ASSOC_REQ_EVENT); 6347 C2S(WOW_HTT_EVENT); 6348 C2S(WOW_RA_MATCH_EVENT); 6349 C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT); 6350 C2S(WOW_IOAC_MAGIC_EVENT); 6351 C2S(WOW_IOAC_SHORT_EVENT); 6352 C2S(WOW_IOAC_EXTEND_EVENT); 6353 C2S(WOW_IOAC_TIMER_EVENT); 6354 C2S(WOW_DFS_PHYERR_RADAR_EVENT); 6355 C2S(WOW_BEACON_EVENT); 6356 C2S(WOW_CLIENT_KICKOUT_EVENT); 6357 C2S(WOW_EVENT_MAX); 6358 default: 6359 return NULL; 6360 } 6361 } 6362 6363 enum wmi_wow_wake_reason { 6364 WOW_REASON_UNSPECIFIED = -1, 6365 WOW_REASON_NLOD = 0, 6366 WOW_REASON_AP_ASSOC_LOST, 6367 WOW_REASON_LOW_RSSI, 6368 WOW_REASON_DEAUTH_RECVD, 6369 WOW_REASON_DISASSOC_RECVD, 6370 WOW_REASON_GTK_HS_ERR, 6371 WOW_REASON_EAP_REQ, 6372 WOW_REASON_FOURWAY_HS_RECV, 6373 WOW_REASON_TIMER_INTR_RECV, 6374 WOW_REASON_PATTERN_MATCH_FOUND, 6375 WOW_REASON_RECV_MAGIC_PATTERN, 6376 WOW_REASON_P2P_DISC, 6377 WOW_REASON_WLAN_HB, 6378 WOW_REASON_CSA_EVENT, 6379 WOW_REASON_PROBE_REQ_WPS_IE_RECV, 6380 WOW_REASON_AUTH_REQ_RECV, 6381 WOW_REASON_ASSOC_REQ_RECV, 6382 WOW_REASON_HTT_EVENT, 6383 WOW_REASON_RA_MATCH, 6384 WOW_REASON_HOST_AUTO_SHUTDOWN, 6385 WOW_REASON_IOAC_MAGIC_EVENT, 6386 WOW_REASON_IOAC_SHORT_EVENT, 6387 WOW_REASON_IOAC_EXTEND_EVENT, 6388 WOW_REASON_IOAC_TIMER_EVENT, 6389 WOW_REASON_ROAM_HO, 6390 WOW_REASON_DFS_PHYERR_RADADR_EVENT, 6391 WOW_REASON_BEACON_RECV, 6392 WOW_REASON_CLIENT_KICKOUT_EVENT, 6393 WOW_REASON_DEBUG_TEST = 0xFF, 6394 }; 6395 6396 static inline const char *wow_reason(enum wmi_wow_wake_reason reason) 6397 { 6398 switch (reason) { 6399 C2S(WOW_REASON_UNSPECIFIED); 6400 C2S(WOW_REASON_NLOD); 6401 C2S(WOW_REASON_AP_ASSOC_LOST); 6402 C2S(WOW_REASON_LOW_RSSI); 6403 C2S(WOW_REASON_DEAUTH_RECVD); 6404 C2S(WOW_REASON_DISASSOC_RECVD); 6405 C2S(WOW_REASON_GTK_HS_ERR); 6406 C2S(WOW_REASON_EAP_REQ); 6407 C2S(WOW_REASON_FOURWAY_HS_RECV); 6408 C2S(WOW_REASON_TIMER_INTR_RECV); 6409 C2S(WOW_REASON_PATTERN_MATCH_FOUND); 6410 C2S(WOW_REASON_RECV_MAGIC_PATTERN); 6411 C2S(WOW_REASON_P2P_DISC); 6412 C2S(WOW_REASON_WLAN_HB); 6413 C2S(WOW_REASON_CSA_EVENT); 6414 C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV); 6415 C2S(WOW_REASON_AUTH_REQ_RECV); 6416 C2S(WOW_REASON_ASSOC_REQ_RECV); 6417 C2S(WOW_REASON_HTT_EVENT); 6418 C2S(WOW_REASON_RA_MATCH); 6419 C2S(WOW_REASON_HOST_AUTO_SHUTDOWN); 6420 C2S(WOW_REASON_IOAC_MAGIC_EVENT); 6421 C2S(WOW_REASON_IOAC_SHORT_EVENT); 6422 C2S(WOW_REASON_IOAC_EXTEND_EVENT); 6423 C2S(WOW_REASON_IOAC_TIMER_EVENT); 6424 C2S(WOW_REASON_ROAM_HO); 6425 C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT); 6426 C2S(WOW_REASON_BEACON_RECV); 6427 C2S(WOW_REASON_CLIENT_KICKOUT_EVENT); 6428 C2S(WOW_REASON_DEBUG_TEST); 6429 default: 6430 return NULL; 6431 } 6432 } 6433 6434 #undef C2S 6435 6436 struct wmi_wow_ev_arg { 6437 u32 vdev_id; 6438 u32 flag; 6439 enum wmi_wow_wake_reason wake_reason; 6440 u32 data_len; 6441 }; 6442 6443 #define WOW_MIN_PATTERN_SIZE 1 6444 #define WOW_MAX_PATTERN_SIZE 148 6445 #define WOW_MAX_PKT_OFFSET 128 6446 6447 enum wmi_tdls_state { 6448 WMI_TDLS_DISABLE, 6449 WMI_TDLS_ENABLE_PASSIVE, 6450 WMI_TDLS_ENABLE_ACTIVE, 6451 }; 6452 6453 enum wmi_tdls_peer_state { 6454 WMI_TDLS_PEER_STATE_PEERING, 6455 WMI_TDLS_PEER_STATE_CONNECTED, 6456 WMI_TDLS_PEER_STATE_TEARDOWN, 6457 }; 6458 6459 struct wmi_tdls_peer_update_cmd_arg { 6460 u32 vdev_id; 6461 enum wmi_tdls_peer_state peer_state; 6462 u8 addr[ETH_ALEN]; 6463 }; 6464 6465 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32 6466 6467 struct wmi_tdls_peer_capab_arg { 6468 u8 peer_uapsd_queues; 6469 u8 peer_max_sp; 6470 u32 buff_sta_support; 6471 u32 off_chan_support; 6472 u32 peer_curr_operclass; 6473 u32 self_curr_operclass; 6474 u32 peer_chan_len; 6475 u32 peer_operclass_len; 6476 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 6477 u32 is_peer_responder; 6478 u32 pref_offchan_num; 6479 u32 pref_offchan_bw; 6480 }; 6481 6482 enum wmi_txbf_conf { 6483 WMI_TXBF_CONF_UNSUPPORTED, 6484 WMI_TXBF_CONF_BEFORE_ASSOC, 6485 WMI_TXBF_CONF_AFTER_ASSOC, 6486 }; 6487 6488 #define WMI_CCA_DETECT_LEVEL_AUTO 0 6489 #define WMI_CCA_DETECT_MARGIN_AUTO 0 6490 6491 struct wmi_pdev_set_adaptive_cca_params { 6492 __le32 enable; 6493 __le32 cca_detect_level; 6494 __le32 cca_detect_margin; 6495 } __packed; 6496 6497 enum wmi_host_platform_type { 6498 WMI_HOST_PLATFORM_HIGH_PERF, 6499 WMI_HOST_PLATFORM_LOW_PERF, 6500 }; 6501 6502 enum wmi_bss_survey_req_type { 6503 WMI_BSS_SURVEY_REQ_TYPE_READ = 1, 6504 WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR, 6505 }; 6506 6507 struct wmi_pdev_chan_info_req_cmd { 6508 __le32 type; 6509 __le32 reserved; 6510 } __packed; 6511 6512 struct ath10k; 6513 struct ath10k_vif; 6514 struct ath10k_fw_stats_pdev; 6515 struct ath10k_fw_stats_peer; 6516 struct ath10k_fw_stats; 6517 6518 int ath10k_wmi_attach(struct ath10k *ar); 6519 void ath10k_wmi_detach(struct ath10k *ar); 6520 void ath10k_wmi_free_host_mem(struct ath10k *ar); 6521 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar); 6522 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar); 6523 6524 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 6525 int ath10k_wmi_connect(struct ath10k *ar); 6526 6527 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 6528 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); 6529 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb, 6530 u32 cmd_id); 6531 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *); 6532 6533 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src, 6534 struct ath10k_fw_stats_pdev *dst); 6535 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src, 6536 struct ath10k_fw_stats_pdev *dst); 6537 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src, 6538 struct ath10k_fw_stats_pdev *dst); 6539 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src, 6540 struct ath10k_fw_stats_pdev *dst); 6541 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src, 6542 struct ath10k_fw_stats_peer *dst); 6543 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar, 6544 struct wmi_host_mem_chunks *chunks); 6545 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn, 6546 const struct wmi_start_scan_arg *arg); 6547 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params, 6548 const struct wmi_wmm_params_arg *arg); 6549 void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch, 6550 const struct wmi_channel_arg *arg); 6551 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg); 6552 6553 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb); 6554 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb); 6555 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb); 6556 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb); 6557 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb); 6558 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb); 6559 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb); 6560 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb); 6561 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb); 6562 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb); 6563 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb); 6564 void ath10k_wmi_event_dfs(struct ath10k *ar, 6565 struct wmi_phyerr_ev_arg *phyerr, u64 tsf); 6566 void ath10k_wmi_event_spectral_scan(struct ath10k *ar, 6567 struct wmi_phyerr_ev_arg *phyerr, 6568 u64 tsf); 6569 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb); 6570 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb); 6571 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb); 6572 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb); 6573 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb); 6574 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb); 6575 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar, 6576 struct sk_buff *skb); 6577 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar, 6578 struct sk_buff *skb); 6579 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb); 6580 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb); 6581 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb); 6582 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb); 6583 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb); 6584 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar, 6585 struct sk_buff *skb); 6586 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb); 6587 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb); 6588 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb); 6589 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar, 6590 struct sk_buff *skb); 6591 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb); 6592 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb); 6593 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb); 6594 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb); 6595 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb); 6596 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf, 6597 int left_len, struct wmi_phyerr_ev_arg *arg); 6598 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar, 6599 struct ath10k_fw_stats *fw_stats, 6600 char *buf); 6601 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar, 6602 struct ath10k_fw_stats *fw_stats, 6603 char *buf); 6604 size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head); 6605 size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head); 6606 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar, 6607 struct ath10k_fw_stats *fw_stats, 6608 char *buf); 6609 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar, 6610 enum wmi_vdev_subtype subtype); 6611 6612 #endif /* _WMI_H_ */ 6613