1 /* 2 * Copyright (c) 2005-2011 Atheros Communications Inc. 3 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. 4 * 5 * Permission to use, copy, modify, and/or distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 */ 17 18 #ifndef _WMI_H_ 19 #define _WMI_H_ 20 21 #include <linux/types.h> 22 #include <net/mac80211.h> 23 24 /* 25 * This file specifies the WMI interface for the Unified Software 26 * Architecture. 27 * 28 * It includes definitions of all the commands and events. Commands are 29 * messages from the host to the target. Events and Replies are messages 30 * from the target to the host. 31 * 32 * Ownership of correctness in regards to WMI commands belongs to the host 33 * driver and the target is not required to validate parameters for value, 34 * proper range, or any other checking. 35 * 36 * Guidelines for extending this interface are below. 37 * 38 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff 39 * 40 * 2. Use ONLY u32 type for defining member variables within WMI 41 * command/event structures. Do not use u8, u16, bool or 42 * enum types within these structures. 43 * 44 * 3. DO NOT define bit fields within structures. Implement bit fields 45 * using masks if necessary. Do not use the programming language's bit 46 * field definition. 47 * 48 * 4. Define macros for encode/decode of u8, u16 fields within 49 * the u32 variables. Use these macros for set/get of these fields. 50 * Try to use this to optimize the structure without bloating it with 51 * u32 variables for every lower sized field. 52 * 53 * 5. Do not use PACK/UNPACK attributes for the structures as each member 54 * variable is already 4-byte aligned by virtue of being a u32 55 * type. 56 * 57 * 6. Comment each parameter part of the WMI command/event structure by 58 * using the 2 stars at the beginning of C comment instead of one star to 59 * enable HTML document generation using Doxygen. 60 * 61 */ 62 63 /* Control Path */ 64 struct wmi_cmd_hdr { 65 __le32 cmd_id; 66 } __packed; 67 68 #define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF 69 #define WMI_CMD_HDR_CMD_ID_LSB 0 70 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000 71 #define WMI_CMD_HDR_PLT_PRIV_LSB 24 72 73 #define HTC_PROTOCOL_VERSION 0x0002 74 #define WMI_PROTOCOL_VERSION 0x0002 75 76 /* 77 * There is no signed version of __le32, so for a temporary solution come 78 * up with our own version. The idea is from fs/ntfs/endian.h. 79 * 80 * Use a_ prefix so that it doesn't conflict if we get proper support to 81 * linux/types.h. 82 */ 83 typedef __s32 __bitwise a_sle32; 84 85 static inline a_sle32 a_cpu_to_sle32(s32 val) 86 { 87 return (__force a_sle32)cpu_to_le32(val); 88 } 89 90 static inline s32 a_sle32_to_cpu(a_sle32 val) 91 { 92 return le32_to_cpu((__force __le32)val); 93 } 94 95 enum wmi_service { 96 WMI_SERVICE_BEACON_OFFLOAD = 0, 97 WMI_SERVICE_SCAN_OFFLOAD, 98 WMI_SERVICE_ROAM_OFFLOAD, 99 WMI_SERVICE_BCN_MISS_OFFLOAD, 100 WMI_SERVICE_STA_PWRSAVE, 101 WMI_SERVICE_STA_ADVANCED_PWRSAVE, 102 WMI_SERVICE_AP_UAPSD, 103 WMI_SERVICE_AP_DFS, 104 WMI_SERVICE_11AC, 105 WMI_SERVICE_BLOCKACK, 106 WMI_SERVICE_PHYERR, 107 WMI_SERVICE_BCN_FILTER, 108 WMI_SERVICE_RTT, 109 WMI_SERVICE_RATECTRL, 110 WMI_SERVICE_WOW, 111 WMI_SERVICE_RATECTRL_CACHE, 112 WMI_SERVICE_IRAM_TIDS, 113 WMI_SERVICE_ARPNS_OFFLOAD, 114 WMI_SERVICE_NLO, 115 WMI_SERVICE_GTK_OFFLOAD, 116 WMI_SERVICE_SCAN_SCH, 117 WMI_SERVICE_CSA_OFFLOAD, 118 WMI_SERVICE_CHATTER, 119 WMI_SERVICE_COEX_FREQAVOID, 120 WMI_SERVICE_PACKET_POWER_SAVE, 121 WMI_SERVICE_FORCE_FW_HANG, 122 WMI_SERVICE_GPIO, 123 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 124 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 125 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 126 WMI_SERVICE_STA_KEEP_ALIVE, 127 WMI_SERVICE_TX_ENCAP, 128 WMI_SERVICE_BURST, 129 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, 130 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, 131 WMI_SERVICE_ROAM_SCAN_OFFLOAD, 132 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 133 WMI_SERVICE_EARLY_RX, 134 WMI_SERVICE_STA_SMPS, 135 WMI_SERVICE_FWTEST, 136 WMI_SERVICE_STA_WMMAC, 137 WMI_SERVICE_TDLS, 138 WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE, 139 WMI_SERVICE_ADAPTIVE_OCS, 140 WMI_SERVICE_BA_SSN_SUPPORT, 141 WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE, 142 WMI_SERVICE_WLAN_HB, 143 WMI_SERVICE_LTE_ANT_SHARE_SUPPORT, 144 WMI_SERVICE_BATCH_SCAN, 145 WMI_SERVICE_QPOWER, 146 WMI_SERVICE_PLMREQ, 147 WMI_SERVICE_THERMAL_MGMT, 148 WMI_SERVICE_RMC, 149 WMI_SERVICE_MHF_OFFLOAD, 150 WMI_SERVICE_COEX_SAR, 151 WMI_SERVICE_BCN_TXRATE_OVERRIDE, 152 WMI_SERVICE_NAN, 153 WMI_SERVICE_L1SS_STAT, 154 WMI_SERVICE_ESTIMATE_LINKSPEED, 155 WMI_SERVICE_OBSS_SCAN, 156 WMI_SERVICE_TDLS_OFFCHAN, 157 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, 158 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, 159 WMI_SERVICE_IBSS_PWRSAVE, 160 WMI_SERVICE_LPASS, 161 WMI_SERVICE_EXTSCAN, 162 WMI_SERVICE_D0WOW, 163 WMI_SERVICE_HSOFFLOAD, 164 WMI_SERVICE_ROAM_HO_OFFLOAD, 165 WMI_SERVICE_RX_FULL_REORDER, 166 WMI_SERVICE_DHCP_OFFLOAD, 167 WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT, 168 WMI_SERVICE_MDNS_OFFLOAD, 169 WMI_SERVICE_SAP_AUTH_OFFLOAD, 170 WMI_SERVICE_ATF, 171 WMI_SERVICE_COEX_GPIO, 172 WMI_SERVICE_ENHANCED_PROXY_STA, 173 WMI_SERVICE_TT, 174 WMI_SERVICE_PEER_CACHING, 175 WMI_SERVICE_AUX_SPECTRAL_INTF, 176 WMI_SERVICE_AUX_CHAN_LOAD_INTF, 177 WMI_SERVICE_BSS_CHANNEL_INFO_64, 178 WMI_SERVICE_EXT_RES_CFG_SUPPORT, 179 WMI_SERVICE_MESH_11S, 180 WMI_SERVICE_MESH_NON_11S, 181 WMI_SERVICE_PEER_STATS, 182 WMI_SERVICE_RESTRT_CHNL_SUPPORT, 183 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 184 WMI_SERVICE_TX_MODE_PUSH_ONLY, 185 WMI_SERVICE_TX_MODE_PUSH_PULL, 186 WMI_SERVICE_TX_MODE_DYNAMIC, 187 WMI_SERVICE_VDEV_RX_FILTER, 188 WMI_SERVICE_BTCOEX, 189 WMI_SERVICE_CHECK_CAL_VERSION, 190 WMI_SERVICE_DBGLOG_WARN2, 191 WMI_SERVICE_BTCOEX_DUTY_CYCLE, 192 WMI_SERVICE_4_WIRE_COEX_SUPPORT, 193 WMI_SERVICE_EXTENDED_NSS_SUPPORT, 194 WMI_SERVICE_PROG_GPIO_BAND_SELECT, 195 WMI_SERVICE_SMART_LOGGING_SUPPORT, 196 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 197 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 198 WMI_SERVICE_MGMT_TX_WMI, 199 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, 200 201 /* keep last */ 202 WMI_SERVICE_MAX, 203 }; 204 205 enum wmi_10x_service { 206 WMI_10X_SERVICE_BEACON_OFFLOAD = 0, 207 WMI_10X_SERVICE_SCAN_OFFLOAD, 208 WMI_10X_SERVICE_ROAM_OFFLOAD, 209 WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 210 WMI_10X_SERVICE_STA_PWRSAVE, 211 WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 212 WMI_10X_SERVICE_AP_UAPSD, 213 WMI_10X_SERVICE_AP_DFS, 214 WMI_10X_SERVICE_11AC, 215 WMI_10X_SERVICE_BLOCKACK, 216 WMI_10X_SERVICE_PHYERR, 217 WMI_10X_SERVICE_BCN_FILTER, 218 WMI_10X_SERVICE_RTT, 219 WMI_10X_SERVICE_RATECTRL, 220 WMI_10X_SERVICE_WOW, 221 WMI_10X_SERVICE_RATECTRL_CACHE, 222 WMI_10X_SERVICE_IRAM_TIDS, 223 WMI_10X_SERVICE_BURST, 224 225 /* introduced in 10.2 */ 226 WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 227 WMI_10X_SERVICE_FORCE_FW_HANG, 228 WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 229 WMI_10X_SERVICE_ATF, 230 WMI_10X_SERVICE_COEX_GPIO, 231 WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 232 WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 233 WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 234 WMI_10X_SERVICE_MESH, 235 WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 236 WMI_10X_SERVICE_PEER_STATS, 237 }; 238 239 enum wmi_main_service { 240 WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0, 241 WMI_MAIN_SERVICE_SCAN_OFFLOAD, 242 WMI_MAIN_SERVICE_ROAM_OFFLOAD, 243 WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 244 WMI_MAIN_SERVICE_STA_PWRSAVE, 245 WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 246 WMI_MAIN_SERVICE_AP_UAPSD, 247 WMI_MAIN_SERVICE_AP_DFS, 248 WMI_MAIN_SERVICE_11AC, 249 WMI_MAIN_SERVICE_BLOCKACK, 250 WMI_MAIN_SERVICE_PHYERR, 251 WMI_MAIN_SERVICE_BCN_FILTER, 252 WMI_MAIN_SERVICE_RTT, 253 WMI_MAIN_SERVICE_RATECTRL, 254 WMI_MAIN_SERVICE_WOW, 255 WMI_MAIN_SERVICE_RATECTRL_CACHE, 256 WMI_MAIN_SERVICE_IRAM_TIDS, 257 WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 258 WMI_MAIN_SERVICE_NLO, 259 WMI_MAIN_SERVICE_GTK_OFFLOAD, 260 WMI_MAIN_SERVICE_SCAN_SCH, 261 WMI_MAIN_SERVICE_CSA_OFFLOAD, 262 WMI_MAIN_SERVICE_CHATTER, 263 WMI_MAIN_SERVICE_COEX_FREQAVOID, 264 WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 265 WMI_MAIN_SERVICE_FORCE_FW_HANG, 266 WMI_MAIN_SERVICE_GPIO, 267 WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 268 WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 269 WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 270 WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 271 WMI_MAIN_SERVICE_TX_ENCAP, 272 }; 273 274 enum wmi_10_4_service { 275 WMI_10_4_SERVICE_BEACON_OFFLOAD = 0, 276 WMI_10_4_SERVICE_SCAN_OFFLOAD, 277 WMI_10_4_SERVICE_ROAM_OFFLOAD, 278 WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 279 WMI_10_4_SERVICE_STA_PWRSAVE, 280 WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 281 WMI_10_4_SERVICE_AP_UAPSD, 282 WMI_10_4_SERVICE_AP_DFS, 283 WMI_10_4_SERVICE_11AC, 284 WMI_10_4_SERVICE_BLOCKACK, 285 WMI_10_4_SERVICE_PHYERR, 286 WMI_10_4_SERVICE_BCN_FILTER, 287 WMI_10_4_SERVICE_RTT, 288 WMI_10_4_SERVICE_RATECTRL, 289 WMI_10_4_SERVICE_WOW, 290 WMI_10_4_SERVICE_RATECTRL_CACHE, 291 WMI_10_4_SERVICE_IRAM_TIDS, 292 WMI_10_4_SERVICE_BURST, 293 WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 294 WMI_10_4_SERVICE_GTK_OFFLOAD, 295 WMI_10_4_SERVICE_SCAN_SCH, 296 WMI_10_4_SERVICE_CSA_OFFLOAD, 297 WMI_10_4_SERVICE_CHATTER, 298 WMI_10_4_SERVICE_COEX_FREQAVOID, 299 WMI_10_4_SERVICE_PACKET_POWER_SAVE, 300 WMI_10_4_SERVICE_FORCE_FW_HANG, 301 WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 302 WMI_10_4_SERVICE_GPIO, 303 WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 304 WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 305 WMI_10_4_SERVICE_STA_KEEP_ALIVE, 306 WMI_10_4_SERVICE_TX_ENCAP, 307 WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 308 WMI_10_4_SERVICE_EARLY_RX, 309 WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 310 WMI_10_4_SERVICE_TT, 311 WMI_10_4_SERVICE_ATF, 312 WMI_10_4_SERVICE_PEER_CACHING, 313 WMI_10_4_SERVICE_COEX_GPIO, 314 WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 315 WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 316 WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 317 WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 318 WMI_10_4_SERVICE_MESH_NON_11S, 319 WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 320 WMI_10_4_SERVICE_PEER_STATS, 321 WMI_10_4_SERVICE_MESH_11S, 322 WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 323 WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 324 WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 325 WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 326 WMI_10_4_SERVICE_VDEV_RX_FILTER, 327 WMI_10_4_SERVICE_BTCOEX, 328 WMI_10_4_SERVICE_CHECK_CAL_VERSION, 329 WMI_10_4_SERVICE_DBGLOG_WARN2, 330 WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, 331 WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, 332 WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, 333 WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, 334 WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, 335 WMI_10_4_SERVICE_TDLS, 336 WMI_10_4_SERVICE_TDLS_OFFCHAN, 337 WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, 338 WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, 339 WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 340 WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 341 WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, 342 }; 343 344 static inline char *wmi_service_name(int service_id) 345 { 346 #define SVCSTR(x) case x: return #x 347 348 switch (service_id) { 349 SVCSTR(WMI_SERVICE_BEACON_OFFLOAD); 350 SVCSTR(WMI_SERVICE_SCAN_OFFLOAD); 351 SVCSTR(WMI_SERVICE_ROAM_OFFLOAD); 352 SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD); 353 SVCSTR(WMI_SERVICE_STA_PWRSAVE); 354 SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE); 355 SVCSTR(WMI_SERVICE_AP_UAPSD); 356 SVCSTR(WMI_SERVICE_AP_DFS); 357 SVCSTR(WMI_SERVICE_11AC); 358 SVCSTR(WMI_SERVICE_BLOCKACK); 359 SVCSTR(WMI_SERVICE_PHYERR); 360 SVCSTR(WMI_SERVICE_BCN_FILTER); 361 SVCSTR(WMI_SERVICE_RTT); 362 SVCSTR(WMI_SERVICE_RATECTRL); 363 SVCSTR(WMI_SERVICE_WOW); 364 SVCSTR(WMI_SERVICE_RATECTRL_CACHE); 365 SVCSTR(WMI_SERVICE_IRAM_TIDS); 366 SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD); 367 SVCSTR(WMI_SERVICE_NLO); 368 SVCSTR(WMI_SERVICE_GTK_OFFLOAD); 369 SVCSTR(WMI_SERVICE_SCAN_SCH); 370 SVCSTR(WMI_SERVICE_CSA_OFFLOAD); 371 SVCSTR(WMI_SERVICE_CHATTER); 372 SVCSTR(WMI_SERVICE_COEX_FREQAVOID); 373 SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE); 374 SVCSTR(WMI_SERVICE_FORCE_FW_HANG); 375 SVCSTR(WMI_SERVICE_GPIO); 376 SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM); 377 SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG); 378 SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG); 379 SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE); 380 SVCSTR(WMI_SERVICE_TX_ENCAP); 381 SVCSTR(WMI_SERVICE_BURST); 382 SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT); 383 SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT); 384 SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD); 385 SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC); 386 SVCSTR(WMI_SERVICE_EARLY_RX); 387 SVCSTR(WMI_SERVICE_STA_SMPS); 388 SVCSTR(WMI_SERVICE_FWTEST); 389 SVCSTR(WMI_SERVICE_STA_WMMAC); 390 SVCSTR(WMI_SERVICE_TDLS); 391 SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE); 392 SVCSTR(WMI_SERVICE_ADAPTIVE_OCS); 393 SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT); 394 SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE); 395 SVCSTR(WMI_SERVICE_WLAN_HB); 396 SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT); 397 SVCSTR(WMI_SERVICE_BATCH_SCAN); 398 SVCSTR(WMI_SERVICE_QPOWER); 399 SVCSTR(WMI_SERVICE_PLMREQ); 400 SVCSTR(WMI_SERVICE_THERMAL_MGMT); 401 SVCSTR(WMI_SERVICE_RMC); 402 SVCSTR(WMI_SERVICE_MHF_OFFLOAD); 403 SVCSTR(WMI_SERVICE_COEX_SAR); 404 SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE); 405 SVCSTR(WMI_SERVICE_NAN); 406 SVCSTR(WMI_SERVICE_L1SS_STAT); 407 SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED); 408 SVCSTR(WMI_SERVICE_OBSS_SCAN); 409 SVCSTR(WMI_SERVICE_TDLS_OFFCHAN); 410 SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA); 411 SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA); 412 SVCSTR(WMI_SERVICE_IBSS_PWRSAVE); 413 SVCSTR(WMI_SERVICE_LPASS); 414 SVCSTR(WMI_SERVICE_EXTSCAN); 415 SVCSTR(WMI_SERVICE_D0WOW); 416 SVCSTR(WMI_SERVICE_HSOFFLOAD); 417 SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD); 418 SVCSTR(WMI_SERVICE_RX_FULL_REORDER); 419 SVCSTR(WMI_SERVICE_DHCP_OFFLOAD); 420 SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT); 421 SVCSTR(WMI_SERVICE_MDNS_OFFLOAD); 422 SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD); 423 SVCSTR(WMI_SERVICE_ATF); 424 SVCSTR(WMI_SERVICE_COEX_GPIO); 425 SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA); 426 SVCSTR(WMI_SERVICE_TT); 427 SVCSTR(WMI_SERVICE_PEER_CACHING); 428 SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF); 429 SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF); 430 SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64); 431 SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT); 432 SVCSTR(WMI_SERVICE_MESH_11S); 433 SVCSTR(WMI_SERVICE_MESH_NON_11S); 434 SVCSTR(WMI_SERVICE_PEER_STATS); 435 SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT); 436 SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT); 437 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY); 438 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL); 439 SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC); 440 SVCSTR(WMI_SERVICE_VDEV_RX_FILTER); 441 SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION); 442 SVCSTR(WMI_SERVICE_DBGLOG_WARN2); 443 SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE); 444 SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT); 445 SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT); 446 SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT); 447 SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT); 448 SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE); 449 SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY); 450 SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH); 451 default: 452 return NULL; 453 } 454 455 #undef SVCSTR 456 } 457 458 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 459 ((svc_id) < (len) && \ 460 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \ 461 BIT((svc_id) % (sizeof(u32)))) 462 463 /* This extension is required to accommodate new services, current limit 464 * for wmi_services is 64 as target is using only 4-bits of each 32-bit 465 * wmi_service word. Extending this to make use of remaining unused bits 466 * for new services. 467 */ 468 #define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 469 ((svc_id) >= (len) && \ 470 __le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \ 471 BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4)) 472 473 #define SVCMAP(x, y, len) \ 474 do { \ 475 if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \ 476 (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \ 477 __set_bit(y, out); \ 478 } while (0) 479 480 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out, 481 size_t len) 482 { 483 SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD, 484 WMI_SERVICE_BEACON_OFFLOAD, len); 485 SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD, 486 WMI_SERVICE_SCAN_OFFLOAD, len); 487 SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD, 488 WMI_SERVICE_ROAM_OFFLOAD, len); 489 SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 490 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 491 SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE, 492 WMI_SERVICE_STA_PWRSAVE, len); 493 SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 494 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 495 SVCMAP(WMI_10X_SERVICE_AP_UAPSD, 496 WMI_SERVICE_AP_UAPSD, len); 497 SVCMAP(WMI_10X_SERVICE_AP_DFS, 498 WMI_SERVICE_AP_DFS, len); 499 SVCMAP(WMI_10X_SERVICE_11AC, 500 WMI_SERVICE_11AC, len); 501 SVCMAP(WMI_10X_SERVICE_BLOCKACK, 502 WMI_SERVICE_BLOCKACK, len); 503 SVCMAP(WMI_10X_SERVICE_PHYERR, 504 WMI_SERVICE_PHYERR, len); 505 SVCMAP(WMI_10X_SERVICE_BCN_FILTER, 506 WMI_SERVICE_BCN_FILTER, len); 507 SVCMAP(WMI_10X_SERVICE_RTT, 508 WMI_SERVICE_RTT, len); 509 SVCMAP(WMI_10X_SERVICE_RATECTRL, 510 WMI_SERVICE_RATECTRL, len); 511 SVCMAP(WMI_10X_SERVICE_WOW, 512 WMI_SERVICE_WOW, len); 513 SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE, 514 WMI_SERVICE_RATECTRL_CACHE, len); 515 SVCMAP(WMI_10X_SERVICE_IRAM_TIDS, 516 WMI_SERVICE_IRAM_TIDS, len); 517 SVCMAP(WMI_10X_SERVICE_BURST, 518 WMI_SERVICE_BURST, len); 519 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 520 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 521 SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG, 522 WMI_SERVICE_FORCE_FW_HANG, len); 523 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 524 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 525 SVCMAP(WMI_10X_SERVICE_ATF, 526 WMI_SERVICE_ATF, len); 527 SVCMAP(WMI_10X_SERVICE_COEX_GPIO, 528 WMI_SERVICE_COEX_GPIO, len); 529 SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 530 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 531 SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 532 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 533 SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 534 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 535 SVCMAP(WMI_10X_SERVICE_MESH, 536 WMI_SERVICE_MESH_11S, len); 537 SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 538 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 539 SVCMAP(WMI_10X_SERVICE_PEER_STATS, 540 WMI_SERVICE_PEER_STATS, len); 541 } 542 543 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out, 544 size_t len) 545 { 546 SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD, 547 WMI_SERVICE_BEACON_OFFLOAD, len); 548 SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD, 549 WMI_SERVICE_SCAN_OFFLOAD, len); 550 SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD, 551 WMI_SERVICE_ROAM_OFFLOAD, len); 552 SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 553 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 554 SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE, 555 WMI_SERVICE_STA_PWRSAVE, len); 556 SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 557 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 558 SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD, 559 WMI_SERVICE_AP_UAPSD, len); 560 SVCMAP(WMI_MAIN_SERVICE_AP_DFS, 561 WMI_SERVICE_AP_DFS, len); 562 SVCMAP(WMI_MAIN_SERVICE_11AC, 563 WMI_SERVICE_11AC, len); 564 SVCMAP(WMI_MAIN_SERVICE_BLOCKACK, 565 WMI_SERVICE_BLOCKACK, len); 566 SVCMAP(WMI_MAIN_SERVICE_PHYERR, 567 WMI_SERVICE_PHYERR, len); 568 SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER, 569 WMI_SERVICE_BCN_FILTER, len); 570 SVCMAP(WMI_MAIN_SERVICE_RTT, 571 WMI_SERVICE_RTT, len); 572 SVCMAP(WMI_MAIN_SERVICE_RATECTRL, 573 WMI_SERVICE_RATECTRL, len); 574 SVCMAP(WMI_MAIN_SERVICE_WOW, 575 WMI_SERVICE_WOW, len); 576 SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE, 577 WMI_SERVICE_RATECTRL_CACHE, len); 578 SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS, 579 WMI_SERVICE_IRAM_TIDS, len); 580 SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 581 WMI_SERVICE_ARPNS_OFFLOAD, len); 582 SVCMAP(WMI_MAIN_SERVICE_NLO, 583 WMI_SERVICE_NLO, len); 584 SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD, 585 WMI_SERVICE_GTK_OFFLOAD, len); 586 SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH, 587 WMI_SERVICE_SCAN_SCH, len); 588 SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD, 589 WMI_SERVICE_CSA_OFFLOAD, len); 590 SVCMAP(WMI_MAIN_SERVICE_CHATTER, 591 WMI_SERVICE_CHATTER, len); 592 SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID, 593 WMI_SERVICE_COEX_FREQAVOID, len); 594 SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 595 WMI_SERVICE_PACKET_POWER_SAVE, len); 596 SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG, 597 WMI_SERVICE_FORCE_FW_HANG, len); 598 SVCMAP(WMI_MAIN_SERVICE_GPIO, 599 WMI_SERVICE_GPIO, len); 600 SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 601 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len); 602 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 603 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 604 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 605 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 606 SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 607 WMI_SERVICE_STA_KEEP_ALIVE, len); 608 SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP, 609 WMI_SERVICE_TX_ENCAP, len); 610 } 611 612 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out, 613 size_t len) 614 { 615 SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD, 616 WMI_SERVICE_BEACON_OFFLOAD, len); 617 SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD, 618 WMI_SERVICE_SCAN_OFFLOAD, len); 619 SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD, 620 WMI_SERVICE_ROAM_OFFLOAD, len); 621 SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 622 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 623 SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE, 624 WMI_SERVICE_STA_PWRSAVE, len); 625 SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 626 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 627 SVCMAP(WMI_10_4_SERVICE_AP_UAPSD, 628 WMI_SERVICE_AP_UAPSD, len); 629 SVCMAP(WMI_10_4_SERVICE_AP_DFS, 630 WMI_SERVICE_AP_DFS, len); 631 SVCMAP(WMI_10_4_SERVICE_11AC, 632 WMI_SERVICE_11AC, len); 633 SVCMAP(WMI_10_4_SERVICE_BLOCKACK, 634 WMI_SERVICE_BLOCKACK, len); 635 SVCMAP(WMI_10_4_SERVICE_PHYERR, 636 WMI_SERVICE_PHYERR, len); 637 SVCMAP(WMI_10_4_SERVICE_BCN_FILTER, 638 WMI_SERVICE_BCN_FILTER, len); 639 SVCMAP(WMI_10_4_SERVICE_RTT, 640 WMI_SERVICE_RTT, len); 641 SVCMAP(WMI_10_4_SERVICE_RATECTRL, 642 WMI_SERVICE_RATECTRL, len); 643 SVCMAP(WMI_10_4_SERVICE_WOW, 644 WMI_SERVICE_WOW, len); 645 SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE, 646 WMI_SERVICE_RATECTRL_CACHE, len); 647 SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS, 648 WMI_SERVICE_IRAM_TIDS, len); 649 SVCMAP(WMI_10_4_SERVICE_BURST, 650 WMI_SERVICE_BURST, len); 651 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 652 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 653 SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD, 654 WMI_SERVICE_GTK_OFFLOAD, len); 655 SVCMAP(WMI_10_4_SERVICE_SCAN_SCH, 656 WMI_SERVICE_SCAN_SCH, len); 657 SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD, 658 WMI_SERVICE_CSA_OFFLOAD, len); 659 SVCMAP(WMI_10_4_SERVICE_CHATTER, 660 WMI_SERVICE_CHATTER, len); 661 SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID, 662 WMI_SERVICE_COEX_FREQAVOID, len); 663 SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE, 664 WMI_SERVICE_PACKET_POWER_SAVE, len); 665 SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG, 666 WMI_SERVICE_FORCE_FW_HANG, len); 667 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 668 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 669 SVCMAP(WMI_10_4_SERVICE_GPIO, 670 WMI_SERVICE_GPIO, len); 671 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 672 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 673 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 674 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 675 SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE, 676 WMI_SERVICE_STA_KEEP_ALIVE, len); 677 SVCMAP(WMI_10_4_SERVICE_TX_ENCAP, 678 WMI_SERVICE_TX_ENCAP, len); 679 SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 680 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len); 681 SVCMAP(WMI_10_4_SERVICE_EARLY_RX, 682 WMI_SERVICE_EARLY_RX, len); 683 SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 684 WMI_SERVICE_ENHANCED_PROXY_STA, len); 685 SVCMAP(WMI_10_4_SERVICE_TT, 686 WMI_SERVICE_TT, len); 687 SVCMAP(WMI_10_4_SERVICE_ATF, 688 WMI_SERVICE_ATF, len); 689 SVCMAP(WMI_10_4_SERVICE_PEER_CACHING, 690 WMI_SERVICE_PEER_CACHING, len); 691 SVCMAP(WMI_10_4_SERVICE_COEX_GPIO, 692 WMI_SERVICE_COEX_GPIO, len); 693 SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 694 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 695 SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 696 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 697 SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 698 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 699 SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 700 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 701 SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S, 702 WMI_SERVICE_MESH_NON_11S, len); 703 SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 704 WMI_SERVICE_RESTRT_CHNL_SUPPORT, len); 705 SVCMAP(WMI_10_4_SERVICE_PEER_STATS, 706 WMI_SERVICE_PEER_STATS, len); 707 SVCMAP(WMI_10_4_SERVICE_MESH_11S, 708 WMI_SERVICE_MESH_11S, len); 709 SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 710 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len); 711 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 712 WMI_SERVICE_TX_MODE_PUSH_ONLY, len); 713 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 714 WMI_SERVICE_TX_MODE_PUSH_PULL, len); 715 SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 716 WMI_SERVICE_TX_MODE_DYNAMIC, len); 717 SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER, 718 WMI_SERVICE_VDEV_RX_FILTER, len); 719 SVCMAP(WMI_10_4_SERVICE_BTCOEX, 720 WMI_SERVICE_BTCOEX, len); 721 SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION, 722 WMI_SERVICE_CHECK_CAL_VERSION, len); 723 SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2, 724 WMI_SERVICE_DBGLOG_WARN2, len); 725 SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, 726 WMI_SERVICE_BTCOEX_DUTY_CYCLE, len); 727 SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, 728 WMI_SERVICE_4_WIRE_COEX_SUPPORT, len); 729 SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, 730 WMI_SERVICE_EXTENDED_NSS_SUPPORT, len); 731 SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, 732 WMI_SERVICE_PROG_GPIO_BAND_SELECT, len); 733 SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, 734 WMI_SERVICE_SMART_LOGGING_SUPPORT, len); 735 SVCMAP(WMI_10_4_SERVICE_TDLS, 736 WMI_SERVICE_TDLS, len); 737 SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN, 738 WMI_SERVICE_TDLS_OFFCHAN, len); 739 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, 740 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len); 741 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, 742 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len); 743 SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 744 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len); 745 SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 746 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len); 747 SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, 748 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len); 749 } 750 751 #undef SVCMAP 752 753 /* 2 word representation of MAC addr */ 754 struct wmi_mac_addr { 755 union { 756 u8 addr[6]; 757 struct { 758 u32 word0; 759 u32 word1; 760 } __packed; 761 } __packed; 762 } __packed; 763 764 struct wmi_cmd_map { 765 u32 init_cmdid; 766 u32 start_scan_cmdid; 767 u32 stop_scan_cmdid; 768 u32 scan_chan_list_cmdid; 769 u32 scan_sch_prio_tbl_cmdid; 770 u32 pdev_set_regdomain_cmdid; 771 u32 pdev_set_channel_cmdid; 772 u32 pdev_set_param_cmdid; 773 u32 pdev_pktlog_enable_cmdid; 774 u32 pdev_pktlog_disable_cmdid; 775 u32 pdev_set_wmm_params_cmdid; 776 u32 pdev_set_ht_cap_ie_cmdid; 777 u32 pdev_set_vht_cap_ie_cmdid; 778 u32 pdev_set_dscp_tid_map_cmdid; 779 u32 pdev_set_quiet_mode_cmdid; 780 u32 pdev_green_ap_ps_enable_cmdid; 781 u32 pdev_get_tpc_config_cmdid; 782 u32 pdev_set_base_macaddr_cmdid; 783 u32 vdev_create_cmdid; 784 u32 vdev_delete_cmdid; 785 u32 vdev_start_request_cmdid; 786 u32 vdev_restart_request_cmdid; 787 u32 vdev_up_cmdid; 788 u32 vdev_stop_cmdid; 789 u32 vdev_down_cmdid; 790 u32 vdev_set_param_cmdid; 791 u32 vdev_install_key_cmdid; 792 u32 peer_create_cmdid; 793 u32 peer_delete_cmdid; 794 u32 peer_flush_tids_cmdid; 795 u32 peer_set_param_cmdid; 796 u32 peer_assoc_cmdid; 797 u32 peer_add_wds_entry_cmdid; 798 u32 peer_remove_wds_entry_cmdid; 799 u32 peer_mcast_group_cmdid; 800 u32 bcn_tx_cmdid; 801 u32 pdev_send_bcn_cmdid; 802 u32 bcn_tmpl_cmdid; 803 u32 bcn_filter_rx_cmdid; 804 u32 prb_req_filter_rx_cmdid; 805 u32 mgmt_tx_cmdid; 806 u32 mgmt_tx_send_cmdid; 807 u32 prb_tmpl_cmdid; 808 u32 addba_clear_resp_cmdid; 809 u32 addba_send_cmdid; 810 u32 addba_status_cmdid; 811 u32 delba_send_cmdid; 812 u32 addba_set_resp_cmdid; 813 u32 send_singleamsdu_cmdid; 814 u32 sta_powersave_mode_cmdid; 815 u32 sta_powersave_param_cmdid; 816 u32 sta_mimo_ps_mode_cmdid; 817 u32 pdev_dfs_enable_cmdid; 818 u32 pdev_dfs_disable_cmdid; 819 u32 roam_scan_mode; 820 u32 roam_scan_rssi_threshold; 821 u32 roam_scan_period; 822 u32 roam_scan_rssi_change_threshold; 823 u32 roam_ap_profile; 824 u32 ofl_scan_add_ap_profile; 825 u32 ofl_scan_remove_ap_profile; 826 u32 ofl_scan_period; 827 u32 p2p_dev_set_device_info; 828 u32 p2p_dev_set_discoverability; 829 u32 p2p_go_set_beacon_ie; 830 u32 p2p_go_set_probe_resp_ie; 831 u32 p2p_set_vendor_ie_data_cmdid; 832 u32 ap_ps_peer_param_cmdid; 833 u32 ap_ps_peer_uapsd_coex_cmdid; 834 u32 peer_rate_retry_sched_cmdid; 835 u32 wlan_profile_trigger_cmdid; 836 u32 wlan_profile_set_hist_intvl_cmdid; 837 u32 wlan_profile_get_profile_data_cmdid; 838 u32 wlan_profile_enable_profile_id_cmdid; 839 u32 wlan_profile_list_profile_id_cmdid; 840 u32 pdev_suspend_cmdid; 841 u32 pdev_resume_cmdid; 842 u32 add_bcn_filter_cmdid; 843 u32 rmv_bcn_filter_cmdid; 844 u32 wow_add_wake_pattern_cmdid; 845 u32 wow_del_wake_pattern_cmdid; 846 u32 wow_enable_disable_wake_event_cmdid; 847 u32 wow_enable_cmdid; 848 u32 wow_hostwakeup_from_sleep_cmdid; 849 u32 rtt_measreq_cmdid; 850 u32 rtt_tsf_cmdid; 851 u32 vdev_spectral_scan_configure_cmdid; 852 u32 vdev_spectral_scan_enable_cmdid; 853 u32 request_stats_cmdid; 854 u32 set_arp_ns_offload_cmdid; 855 u32 network_list_offload_config_cmdid; 856 u32 gtk_offload_cmdid; 857 u32 csa_offload_enable_cmdid; 858 u32 csa_offload_chanswitch_cmdid; 859 u32 chatter_set_mode_cmdid; 860 u32 peer_tid_addba_cmdid; 861 u32 peer_tid_delba_cmdid; 862 u32 sta_dtim_ps_method_cmdid; 863 u32 sta_uapsd_auto_trig_cmdid; 864 u32 sta_keepalive_cmd; 865 u32 echo_cmdid; 866 u32 pdev_utf_cmdid; 867 u32 dbglog_cfg_cmdid; 868 u32 pdev_qvit_cmdid; 869 u32 pdev_ftm_intg_cmdid; 870 u32 vdev_set_keepalive_cmdid; 871 u32 vdev_get_keepalive_cmdid; 872 u32 force_fw_hang_cmdid; 873 u32 gpio_config_cmdid; 874 u32 gpio_output_cmdid; 875 u32 pdev_get_temperature_cmdid; 876 u32 vdev_set_wmm_params_cmdid; 877 u32 tdls_set_state_cmdid; 878 u32 tdls_peer_update_cmdid; 879 u32 adaptive_qcs_cmdid; 880 u32 scan_update_request_cmdid; 881 u32 vdev_standby_response_cmdid; 882 u32 vdev_resume_response_cmdid; 883 u32 wlan_peer_caching_add_peer_cmdid; 884 u32 wlan_peer_caching_evict_peer_cmdid; 885 u32 wlan_peer_caching_restore_peer_cmdid; 886 u32 wlan_peer_caching_print_all_peers_info_cmdid; 887 u32 peer_update_wds_entry_cmdid; 888 u32 peer_add_proxy_sta_entry_cmdid; 889 u32 rtt_keepalive_cmdid; 890 u32 oem_req_cmdid; 891 u32 nan_cmdid; 892 u32 vdev_ratemask_cmdid; 893 u32 qboost_cfg_cmdid; 894 u32 pdev_smart_ant_enable_cmdid; 895 u32 pdev_smart_ant_set_rx_antenna_cmdid; 896 u32 peer_smart_ant_set_tx_antenna_cmdid; 897 u32 peer_smart_ant_set_train_info_cmdid; 898 u32 peer_smart_ant_set_node_config_ops_cmdid; 899 u32 pdev_set_antenna_switch_table_cmdid; 900 u32 pdev_set_ctl_table_cmdid; 901 u32 pdev_set_mimogain_table_cmdid; 902 u32 pdev_ratepwr_table_cmdid; 903 u32 pdev_ratepwr_chainmsk_table_cmdid; 904 u32 pdev_fips_cmdid; 905 u32 tt_set_conf_cmdid; 906 u32 fwtest_cmdid; 907 u32 vdev_atf_request_cmdid; 908 u32 peer_atf_request_cmdid; 909 u32 pdev_get_ani_cck_config_cmdid; 910 u32 pdev_get_ani_ofdm_config_cmdid; 911 u32 pdev_reserve_ast_entry_cmdid; 912 u32 pdev_get_nfcal_power_cmdid; 913 u32 pdev_get_tpc_cmdid; 914 u32 pdev_get_ast_info_cmdid; 915 u32 vdev_set_dscp_tid_map_cmdid; 916 u32 pdev_get_info_cmdid; 917 u32 vdev_get_info_cmdid; 918 u32 vdev_filter_neighbor_rx_packets_cmdid; 919 u32 mu_cal_start_cmdid; 920 u32 set_cca_params_cmdid; 921 u32 pdev_bss_chan_info_request_cmdid; 922 u32 pdev_enable_adaptive_cca_cmdid; 923 u32 ext_resource_cfg_cmdid; 924 u32 vdev_set_ie_cmdid; 925 u32 set_lteu_config_cmdid; 926 u32 atf_ssid_grouping_request_cmdid; 927 u32 peer_atf_ext_request_cmdid; 928 u32 set_periodic_channel_stats_cfg_cmdid; 929 u32 peer_bwf_request_cmdid; 930 u32 btcoex_cfg_cmdid; 931 u32 peer_tx_mu_txmit_count_cmdid; 932 u32 peer_tx_mu_txmit_rstcnt_cmdid; 933 u32 peer_gid_userpos_list_cmdid; 934 u32 pdev_check_cal_version_cmdid; 935 u32 coex_version_cfg_cmid; 936 u32 pdev_get_rx_filter_cmdid; 937 u32 pdev_extended_nss_cfg_cmdid; 938 u32 vdev_set_scan_nac_rssi_cmdid; 939 u32 prog_gpio_band_select_cmdid; 940 u32 config_smart_logging_cmdid; 941 u32 debug_fatal_condition_cmdid; 942 u32 get_tsf_timer_cmdid; 943 u32 pdev_get_tpc_table_cmdid; 944 u32 vdev_sifs_trigger_time_cmdid; 945 u32 pdev_wds_entry_list_cmdid; 946 u32 tdls_set_offchan_mode_cmdid; 947 }; 948 949 /* 950 * wmi command groups. 951 */ 952 enum wmi_cmd_group { 953 /* 0 to 2 are reserved */ 954 WMI_GRP_START = 0x3, 955 WMI_GRP_SCAN = WMI_GRP_START, 956 WMI_GRP_PDEV, 957 WMI_GRP_VDEV, 958 WMI_GRP_PEER, 959 WMI_GRP_MGMT, 960 WMI_GRP_BA_NEG, 961 WMI_GRP_STA_PS, 962 WMI_GRP_DFS, 963 WMI_GRP_ROAM, 964 WMI_GRP_OFL_SCAN, 965 WMI_GRP_P2P, 966 WMI_GRP_AP_PS, 967 WMI_GRP_RATE_CTRL, 968 WMI_GRP_PROFILE, 969 WMI_GRP_SUSPEND, 970 WMI_GRP_BCN_FILTER, 971 WMI_GRP_WOW, 972 WMI_GRP_RTT, 973 WMI_GRP_SPECTRAL, 974 WMI_GRP_STATS, 975 WMI_GRP_ARP_NS_OFL, 976 WMI_GRP_NLO_OFL, 977 WMI_GRP_GTK_OFL, 978 WMI_GRP_CSA_OFL, 979 WMI_GRP_CHATTER, 980 WMI_GRP_TID_ADDBA, 981 WMI_GRP_MISC, 982 WMI_GRP_GPIO, 983 }; 984 985 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1) 986 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1) 987 988 #define WMI_CMD_UNSUPPORTED 0 989 990 /* Command IDs and command events for MAIN FW. */ 991 enum wmi_cmd_id { 992 WMI_INIT_CMDID = 0x1, 993 994 /* Scan specific commands */ 995 WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN), 996 WMI_STOP_SCAN_CMDID, 997 WMI_SCAN_CHAN_LIST_CMDID, 998 WMI_SCAN_SCH_PRIO_TBL_CMDID, 999 1000 /* PDEV (physical device) specific commands */ 1001 WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV), 1002 WMI_PDEV_SET_CHANNEL_CMDID, 1003 WMI_PDEV_SET_PARAM_CMDID, 1004 WMI_PDEV_PKTLOG_ENABLE_CMDID, 1005 WMI_PDEV_PKTLOG_DISABLE_CMDID, 1006 WMI_PDEV_SET_WMM_PARAMS_CMDID, 1007 WMI_PDEV_SET_HT_CAP_IE_CMDID, 1008 WMI_PDEV_SET_VHT_CAP_IE_CMDID, 1009 WMI_PDEV_SET_DSCP_TID_MAP_CMDID, 1010 WMI_PDEV_SET_QUIET_MODE_CMDID, 1011 WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1012 WMI_PDEV_GET_TPC_CONFIG_CMDID, 1013 WMI_PDEV_SET_BASE_MACADDR_CMDID, 1014 1015 /* VDEV (virtual device) specific commands */ 1016 WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV), 1017 WMI_VDEV_DELETE_CMDID, 1018 WMI_VDEV_START_REQUEST_CMDID, 1019 WMI_VDEV_RESTART_REQUEST_CMDID, 1020 WMI_VDEV_UP_CMDID, 1021 WMI_VDEV_STOP_CMDID, 1022 WMI_VDEV_DOWN_CMDID, 1023 WMI_VDEV_SET_PARAM_CMDID, 1024 WMI_VDEV_INSTALL_KEY_CMDID, 1025 1026 /* peer specific commands */ 1027 WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER), 1028 WMI_PEER_DELETE_CMDID, 1029 WMI_PEER_FLUSH_TIDS_CMDID, 1030 WMI_PEER_SET_PARAM_CMDID, 1031 WMI_PEER_ASSOC_CMDID, 1032 WMI_PEER_ADD_WDS_ENTRY_CMDID, 1033 WMI_PEER_REMOVE_WDS_ENTRY_CMDID, 1034 WMI_PEER_MCAST_GROUP_CMDID, 1035 1036 /* beacon/management specific commands */ 1037 WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT), 1038 WMI_PDEV_SEND_BCN_CMDID, 1039 WMI_BCN_TMPL_CMDID, 1040 WMI_BCN_FILTER_RX_CMDID, 1041 WMI_PRB_REQ_FILTER_RX_CMDID, 1042 WMI_MGMT_TX_CMDID, 1043 WMI_PRB_TMPL_CMDID, 1044 1045 /* commands to directly control BA negotiation directly from host. */ 1046 WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG), 1047 WMI_ADDBA_SEND_CMDID, 1048 WMI_ADDBA_STATUS_CMDID, 1049 WMI_DELBA_SEND_CMDID, 1050 WMI_ADDBA_SET_RESP_CMDID, 1051 WMI_SEND_SINGLEAMSDU_CMDID, 1052 1053 /* Station power save specific config */ 1054 WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS), 1055 WMI_STA_POWERSAVE_PARAM_CMDID, 1056 WMI_STA_MIMO_PS_MODE_CMDID, 1057 1058 /** DFS-specific commands */ 1059 WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS), 1060 WMI_PDEV_DFS_DISABLE_CMDID, 1061 1062 /* Roaming specific commands */ 1063 WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM), 1064 WMI_ROAM_SCAN_RSSI_THRESHOLD, 1065 WMI_ROAM_SCAN_PERIOD, 1066 WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1067 WMI_ROAM_AP_PROFILE, 1068 1069 /* offload scan specific commands */ 1070 WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN), 1071 WMI_OFL_SCAN_REMOVE_AP_PROFILE, 1072 WMI_OFL_SCAN_PERIOD, 1073 1074 /* P2P specific commands */ 1075 WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P), 1076 WMI_P2P_DEV_SET_DISCOVERABILITY, 1077 WMI_P2P_GO_SET_BEACON_IE, 1078 WMI_P2P_GO_SET_PROBE_RESP_IE, 1079 WMI_P2P_SET_VENDOR_IE_DATA_CMDID, 1080 1081 /* AP power save specific config */ 1082 WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS), 1083 WMI_AP_PS_PEER_UAPSD_COEX_CMDID, 1084 1085 /* Rate-control specific commands */ 1086 WMI_PEER_RATE_RETRY_SCHED_CMDID = 1087 WMI_CMD_GRP(WMI_GRP_RATE_CTRL), 1088 1089 /* WLAN Profiling commands. */ 1090 WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE), 1091 WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1092 WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1093 WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1094 WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1095 1096 /* Suspend resume command Ids */ 1097 WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND), 1098 WMI_PDEV_RESUME_CMDID, 1099 1100 /* Beacon filter commands */ 1101 WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER), 1102 WMI_RMV_BCN_FILTER_CMDID, 1103 1104 /* WOW Specific WMI commands*/ 1105 WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW), 1106 WMI_WOW_DEL_WAKE_PATTERN_CMDID, 1107 WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1108 WMI_WOW_ENABLE_CMDID, 1109 WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1110 1111 /* RTT measurement related cmd */ 1112 WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT), 1113 WMI_RTT_TSF_CMDID, 1114 1115 /* spectral scan commands */ 1116 WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL), 1117 WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1118 1119 /* F/W stats */ 1120 WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS), 1121 1122 /* ARP OFFLOAD REQUEST*/ 1123 WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL), 1124 1125 /* NS offload confid*/ 1126 WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL), 1127 1128 /* GTK offload Specific WMI commands*/ 1129 WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL), 1130 1131 /* CSA offload Specific WMI commands*/ 1132 WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL), 1133 WMI_CSA_OFFLOAD_CHANSWITCH_CMDID, 1134 1135 /* Chatter commands*/ 1136 WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER), 1137 1138 /* addba specific commands */ 1139 WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA), 1140 WMI_PEER_TID_DELBA_CMDID, 1141 1142 /* set station mimo powersave method */ 1143 WMI_STA_DTIM_PS_METHOD_CMDID, 1144 /* Configure the Station UAPSD AC Auto Trigger Parameters */ 1145 WMI_STA_UAPSD_AUTO_TRIG_CMDID, 1146 1147 /* STA Keep alive parameter configuration, 1148 * Requires WMI_SERVICE_STA_KEEP_ALIVE 1149 */ 1150 WMI_STA_KEEPALIVE_CMD, 1151 1152 /* misc command group */ 1153 WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC), 1154 WMI_PDEV_UTF_CMDID, 1155 WMI_DBGLOG_CFG_CMDID, 1156 WMI_PDEV_QVIT_CMDID, 1157 WMI_PDEV_FTM_INTG_CMDID, 1158 WMI_VDEV_SET_KEEPALIVE_CMDID, 1159 WMI_VDEV_GET_KEEPALIVE_CMDID, 1160 WMI_FORCE_FW_HANG_CMDID, 1161 1162 /* GPIO Configuration */ 1163 WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO), 1164 WMI_GPIO_OUTPUT_CMDID, 1165 }; 1166 1167 enum wmi_event_id { 1168 WMI_SERVICE_READY_EVENTID = 0x1, 1169 WMI_READY_EVENTID, 1170 1171 /* Scan specific events */ 1172 WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN), 1173 1174 /* PDEV specific events */ 1175 WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV), 1176 WMI_CHAN_INFO_EVENTID, 1177 WMI_PHYERR_EVENTID, 1178 1179 /* VDEV specific events */ 1180 WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV), 1181 WMI_VDEV_STOPPED_EVENTID, 1182 WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID, 1183 1184 /* peer specific events */ 1185 WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER), 1186 1187 /* beacon/mgmt specific events */ 1188 WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT), 1189 WMI_HOST_SWBA_EVENTID, 1190 WMI_TBTTOFFSET_UPDATE_EVENTID, 1191 1192 /* ADDBA Related WMI Events*/ 1193 WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG), 1194 WMI_TX_ADDBA_COMPLETE_EVENTID, 1195 1196 /* Roam event to trigger roaming on host */ 1197 WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM), 1198 WMI_PROFILE_MATCH, 1199 1200 /* WoW */ 1201 WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW), 1202 1203 /* RTT */ 1204 WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT), 1205 WMI_TSF_MEASUREMENT_REPORT_EVENTID, 1206 WMI_RTT_ERROR_REPORT_EVENTID, 1207 1208 /* GTK offload */ 1209 WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL), 1210 WMI_GTK_REKEY_FAIL_EVENTID, 1211 1212 /* CSA IE received event */ 1213 WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL), 1214 1215 /* Misc events */ 1216 WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC), 1217 WMI_PDEV_UTF_EVENTID, 1218 WMI_DEBUG_MESG_EVENTID, 1219 WMI_UPDATE_STATS_EVENTID, 1220 WMI_DEBUG_PRINT_EVENTID, 1221 WMI_DCS_INTERFERENCE_EVENTID, 1222 WMI_PDEV_QVIT_EVENTID, 1223 WMI_WLAN_PROFILE_DATA_EVENTID, 1224 WMI_PDEV_FTM_INTG_EVENTID, 1225 WMI_WLAN_FREQ_AVOID_EVENTID, 1226 WMI_VDEV_GET_KEEPALIVE_EVENTID, 1227 1228 /* GPIO Event */ 1229 WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO), 1230 }; 1231 1232 /* Command IDs and command events for 10.X firmware */ 1233 enum wmi_10x_cmd_id { 1234 WMI_10X_START_CMDID = 0x9000, 1235 WMI_10X_END_CMDID = 0x9FFF, 1236 1237 /* initialize the wlan sub system */ 1238 WMI_10X_INIT_CMDID, 1239 1240 /* Scan specific commands */ 1241 1242 WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID, 1243 WMI_10X_STOP_SCAN_CMDID, 1244 WMI_10X_SCAN_CHAN_LIST_CMDID, 1245 WMI_10X_ECHO_CMDID, 1246 1247 /* PDEV(physical device) specific commands */ 1248 WMI_10X_PDEV_SET_REGDOMAIN_CMDID, 1249 WMI_10X_PDEV_SET_CHANNEL_CMDID, 1250 WMI_10X_PDEV_SET_PARAM_CMDID, 1251 WMI_10X_PDEV_PKTLOG_ENABLE_CMDID, 1252 WMI_10X_PDEV_PKTLOG_DISABLE_CMDID, 1253 WMI_10X_PDEV_SET_WMM_PARAMS_CMDID, 1254 WMI_10X_PDEV_SET_HT_CAP_IE_CMDID, 1255 WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID, 1256 WMI_10X_PDEV_SET_BASE_MACADDR_CMDID, 1257 WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID, 1258 WMI_10X_PDEV_SET_QUIET_MODE_CMDID, 1259 WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1260 WMI_10X_PDEV_GET_TPC_CONFIG_CMDID, 1261 1262 /* VDEV(virtual device) specific commands */ 1263 WMI_10X_VDEV_CREATE_CMDID, 1264 WMI_10X_VDEV_DELETE_CMDID, 1265 WMI_10X_VDEV_START_REQUEST_CMDID, 1266 WMI_10X_VDEV_RESTART_REQUEST_CMDID, 1267 WMI_10X_VDEV_UP_CMDID, 1268 WMI_10X_VDEV_STOP_CMDID, 1269 WMI_10X_VDEV_DOWN_CMDID, 1270 WMI_10X_VDEV_STANDBY_RESPONSE_CMDID, 1271 WMI_10X_VDEV_RESUME_RESPONSE_CMDID, 1272 WMI_10X_VDEV_SET_PARAM_CMDID, 1273 WMI_10X_VDEV_INSTALL_KEY_CMDID, 1274 1275 /* peer specific commands */ 1276 WMI_10X_PEER_CREATE_CMDID, 1277 WMI_10X_PEER_DELETE_CMDID, 1278 WMI_10X_PEER_FLUSH_TIDS_CMDID, 1279 WMI_10X_PEER_SET_PARAM_CMDID, 1280 WMI_10X_PEER_ASSOC_CMDID, 1281 WMI_10X_PEER_ADD_WDS_ENTRY_CMDID, 1282 WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID, 1283 WMI_10X_PEER_MCAST_GROUP_CMDID, 1284 1285 /* beacon/management specific commands */ 1286 1287 WMI_10X_BCN_TX_CMDID, 1288 WMI_10X_BCN_PRB_TMPL_CMDID, 1289 WMI_10X_BCN_FILTER_RX_CMDID, 1290 WMI_10X_PRB_REQ_FILTER_RX_CMDID, 1291 WMI_10X_MGMT_TX_CMDID, 1292 1293 /* commands to directly control ba negotiation directly from host. */ 1294 WMI_10X_ADDBA_CLEAR_RESP_CMDID, 1295 WMI_10X_ADDBA_SEND_CMDID, 1296 WMI_10X_ADDBA_STATUS_CMDID, 1297 WMI_10X_DELBA_SEND_CMDID, 1298 WMI_10X_ADDBA_SET_RESP_CMDID, 1299 WMI_10X_SEND_SINGLEAMSDU_CMDID, 1300 1301 /* Station power save specific config */ 1302 WMI_10X_STA_POWERSAVE_MODE_CMDID, 1303 WMI_10X_STA_POWERSAVE_PARAM_CMDID, 1304 WMI_10X_STA_MIMO_PS_MODE_CMDID, 1305 1306 /* set debug log config */ 1307 WMI_10X_DBGLOG_CFG_CMDID, 1308 1309 /* DFS-specific commands */ 1310 WMI_10X_PDEV_DFS_ENABLE_CMDID, 1311 WMI_10X_PDEV_DFS_DISABLE_CMDID, 1312 1313 /* QVIT specific command id */ 1314 WMI_10X_PDEV_QVIT_CMDID, 1315 1316 /* Offload Scan and Roaming related commands */ 1317 WMI_10X_ROAM_SCAN_MODE, 1318 WMI_10X_ROAM_SCAN_RSSI_THRESHOLD, 1319 WMI_10X_ROAM_SCAN_PERIOD, 1320 WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1321 WMI_10X_ROAM_AP_PROFILE, 1322 WMI_10X_OFL_SCAN_ADD_AP_PROFILE, 1323 WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE, 1324 WMI_10X_OFL_SCAN_PERIOD, 1325 1326 /* P2P specific commands */ 1327 WMI_10X_P2P_DEV_SET_DEVICE_INFO, 1328 WMI_10X_P2P_DEV_SET_DISCOVERABILITY, 1329 WMI_10X_P2P_GO_SET_BEACON_IE, 1330 WMI_10X_P2P_GO_SET_PROBE_RESP_IE, 1331 1332 /* AP power save specific config */ 1333 WMI_10X_AP_PS_PEER_PARAM_CMDID, 1334 WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID, 1335 1336 /* Rate-control specific commands */ 1337 WMI_10X_PEER_RATE_RETRY_SCHED_CMDID, 1338 1339 /* WLAN Profiling commands. */ 1340 WMI_10X_WLAN_PROFILE_TRIGGER_CMDID, 1341 WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1342 WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1343 WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1344 WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1345 1346 /* Suspend resume command Ids */ 1347 WMI_10X_PDEV_SUSPEND_CMDID, 1348 WMI_10X_PDEV_RESUME_CMDID, 1349 1350 /* Beacon filter commands */ 1351 WMI_10X_ADD_BCN_FILTER_CMDID, 1352 WMI_10X_RMV_BCN_FILTER_CMDID, 1353 1354 /* WOW Specific WMI commands*/ 1355 WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID, 1356 WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID, 1357 WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1358 WMI_10X_WOW_ENABLE_CMDID, 1359 WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1360 1361 /* RTT measurement related cmd */ 1362 WMI_10X_RTT_MEASREQ_CMDID, 1363 WMI_10X_RTT_TSF_CMDID, 1364 1365 /* transmit beacon by value */ 1366 WMI_10X_PDEV_SEND_BCN_CMDID, 1367 1368 /* F/W stats */ 1369 WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1370 WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1371 WMI_10X_REQUEST_STATS_CMDID, 1372 1373 /* GPIO Configuration */ 1374 WMI_10X_GPIO_CONFIG_CMDID, 1375 WMI_10X_GPIO_OUTPUT_CMDID, 1376 1377 WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1, 1378 }; 1379 1380 enum wmi_10x_event_id { 1381 WMI_10X_SERVICE_READY_EVENTID = 0x8000, 1382 WMI_10X_READY_EVENTID, 1383 WMI_10X_START_EVENTID = 0x9000, 1384 WMI_10X_END_EVENTID = 0x9FFF, 1385 1386 /* Scan specific events */ 1387 WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID, 1388 WMI_10X_ECHO_EVENTID, 1389 WMI_10X_DEBUG_MESG_EVENTID, 1390 WMI_10X_UPDATE_STATS_EVENTID, 1391 1392 /* Instantaneous RSSI event */ 1393 WMI_10X_INST_RSSI_STATS_EVENTID, 1394 1395 /* VDEV specific events */ 1396 WMI_10X_VDEV_START_RESP_EVENTID, 1397 WMI_10X_VDEV_STANDBY_REQ_EVENTID, 1398 WMI_10X_VDEV_RESUME_REQ_EVENTID, 1399 WMI_10X_VDEV_STOPPED_EVENTID, 1400 1401 /* peer specific events */ 1402 WMI_10X_PEER_STA_KICKOUT_EVENTID, 1403 1404 /* beacon/mgmt specific events */ 1405 WMI_10X_HOST_SWBA_EVENTID, 1406 WMI_10X_TBTTOFFSET_UPDATE_EVENTID, 1407 WMI_10X_MGMT_RX_EVENTID, 1408 1409 /* Channel stats event */ 1410 WMI_10X_CHAN_INFO_EVENTID, 1411 1412 /* PHY Error specific WMI event */ 1413 WMI_10X_PHYERR_EVENTID, 1414 1415 /* Roam event to trigger roaming on host */ 1416 WMI_10X_ROAM_EVENTID, 1417 1418 /* matching AP found from list of profiles */ 1419 WMI_10X_PROFILE_MATCH, 1420 1421 /* debug print message used for tracing FW code while debugging */ 1422 WMI_10X_DEBUG_PRINT_EVENTID, 1423 /* VI spoecific event */ 1424 WMI_10X_PDEV_QVIT_EVENTID, 1425 /* FW code profile data in response to profile request */ 1426 WMI_10X_WLAN_PROFILE_DATA_EVENTID, 1427 1428 /*RTT related event ID*/ 1429 WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID, 1430 WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID, 1431 WMI_10X_RTT_ERROR_REPORT_EVENTID, 1432 1433 WMI_10X_WOW_WAKEUP_HOST_EVENTID, 1434 WMI_10X_DCS_INTERFERENCE_EVENTID, 1435 1436 /* TPC config for the current operating channel */ 1437 WMI_10X_PDEV_TPC_CONFIG_EVENTID, 1438 1439 WMI_10X_GPIO_INPUT_EVENTID, 1440 WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1, 1441 }; 1442 1443 enum wmi_10_2_cmd_id { 1444 WMI_10_2_START_CMDID = 0x9000, 1445 WMI_10_2_END_CMDID = 0x9FFF, 1446 WMI_10_2_INIT_CMDID, 1447 WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID, 1448 WMI_10_2_STOP_SCAN_CMDID, 1449 WMI_10_2_SCAN_CHAN_LIST_CMDID, 1450 WMI_10_2_ECHO_CMDID, 1451 WMI_10_2_PDEV_SET_REGDOMAIN_CMDID, 1452 WMI_10_2_PDEV_SET_CHANNEL_CMDID, 1453 WMI_10_2_PDEV_SET_PARAM_CMDID, 1454 WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID, 1455 WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID, 1456 WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID, 1457 WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID, 1458 WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID, 1459 WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID, 1460 WMI_10_2_PDEV_SET_QUIET_MODE_CMDID, 1461 WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1462 WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID, 1463 WMI_10_2_VDEV_CREATE_CMDID, 1464 WMI_10_2_VDEV_DELETE_CMDID, 1465 WMI_10_2_VDEV_START_REQUEST_CMDID, 1466 WMI_10_2_VDEV_RESTART_REQUEST_CMDID, 1467 WMI_10_2_VDEV_UP_CMDID, 1468 WMI_10_2_VDEV_STOP_CMDID, 1469 WMI_10_2_VDEV_DOWN_CMDID, 1470 WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID, 1471 WMI_10_2_VDEV_RESUME_RESPONSE_CMDID, 1472 WMI_10_2_VDEV_SET_PARAM_CMDID, 1473 WMI_10_2_VDEV_INSTALL_KEY_CMDID, 1474 WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID, 1475 WMI_10_2_PEER_CREATE_CMDID, 1476 WMI_10_2_PEER_DELETE_CMDID, 1477 WMI_10_2_PEER_FLUSH_TIDS_CMDID, 1478 WMI_10_2_PEER_SET_PARAM_CMDID, 1479 WMI_10_2_PEER_ASSOC_CMDID, 1480 WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID, 1481 WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID, 1482 WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID, 1483 WMI_10_2_PEER_MCAST_GROUP_CMDID, 1484 WMI_10_2_BCN_TX_CMDID, 1485 WMI_10_2_BCN_PRB_TMPL_CMDID, 1486 WMI_10_2_BCN_FILTER_RX_CMDID, 1487 WMI_10_2_PRB_REQ_FILTER_RX_CMDID, 1488 WMI_10_2_MGMT_TX_CMDID, 1489 WMI_10_2_ADDBA_CLEAR_RESP_CMDID, 1490 WMI_10_2_ADDBA_SEND_CMDID, 1491 WMI_10_2_ADDBA_STATUS_CMDID, 1492 WMI_10_2_DELBA_SEND_CMDID, 1493 WMI_10_2_ADDBA_SET_RESP_CMDID, 1494 WMI_10_2_SEND_SINGLEAMSDU_CMDID, 1495 WMI_10_2_STA_POWERSAVE_MODE_CMDID, 1496 WMI_10_2_STA_POWERSAVE_PARAM_CMDID, 1497 WMI_10_2_STA_MIMO_PS_MODE_CMDID, 1498 WMI_10_2_DBGLOG_CFG_CMDID, 1499 WMI_10_2_PDEV_DFS_ENABLE_CMDID, 1500 WMI_10_2_PDEV_DFS_DISABLE_CMDID, 1501 WMI_10_2_PDEV_QVIT_CMDID, 1502 WMI_10_2_ROAM_SCAN_MODE, 1503 WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD, 1504 WMI_10_2_ROAM_SCAN_PERIOD, 1505 WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1506 WMI_10_2_ROAM_AP_PROFILE, 1507 WMI_10_2_OFL_SCAN_ADD_AP_PROFILE, 1508 WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE, 1509 WMI_10_2_OFL_SCAN_PERIOD, 1510 WMI_10_2_P2P_DEV_SET_DEVICE_INFO, 1511 WMI_10_2_P2P_DEV_SET_DISCOVERABILITY, 1512 WMI_10_2_P2P_GO_SET_BEACON_IE, 1513 WMI_10_2_P2P_GO_SET_PROBE_RESP_IE, 1514 WMI_10_2_AP_PS_PEER_PARAM_CMDID, 1515 WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID, 1516 WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID, 1517 WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID, 1518 WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1519 WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1520 WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1521 WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1522 WMI_10_2_PDEV_SUSPEND_CMDID, 1523 WMI_10_2_PDEV_RESUME_CMDID, 1524 WMI_10_2_ADD_BCN_FILTER_CMDID, 1525 WMI_10_2_RMV_BCN_FILTER_CMDID, 1526 WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID, 1527 WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID, 1528 WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1529 WMI_10_2_WOW_ENABLE_CMDID, 1530 WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1531 WMI_10_2_RTT_MEASREQ_CMDID, 1532 WMI_10_2_RTT_TSF_CMDID, 1533 WMI_10_2_RTT_KEEPALIVE_CMDID, 1534 WMI_10_2_PDEV_SEND_BCN_CMDID, 1535 WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1536 WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1537 WMI_10_2_REQUEST_STATS_CMDID, 1538 WMI_10_2_GPIO_CONFIG_CMDID, 1539 WMI_10_2_GPIO_OUTPUT_CMDID, 1540 WMI_10_2_VDEV_RATEMASK_CMDID, 1541 WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID, 1542 WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1543 WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1544 WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1545 WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1546 WMI_10_2_FORCE_FW_HANG_CMDID, 1547 WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1548 WMI_10_2_PDEV_SET_CTL_TABLE_CMDID, 1549 WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1550 WMI_10_2_PDEV_RATEPWR_TABLE_CMDID, 1551 WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1552 WMI_10_2_PDEV_GET_INFO, 1553 WMI_10_2_VDEV_GET_INFO, 1554 WMI_10_2_VDEV_ATF_REQUEST_CMDID, 1555 WMI_10_2_PEER_ATF_REQUEST_CMDID, 1556 WMI_10_2_PDEV_GET_TEMPERATURE_CMDID, 1557 WMI_10_2_MU_CAL_START_CMDID, 1558 WMI_10_2_SET_LTEU_CONFIG_CMDID, 1559 WMI_10_2_SET_CCA_PARAMS, 1560 WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1561 WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1, 1562 }; 1563 1564 enum wmi_10_2_event_id { 1565 WMI_10_2_SERVICE_READY_EVENTID = 0x8000, 1566 WMI_10_2_READY_EVENTID, 1567 WMI_10_2_DEBUG_MESG_EVENTID, 1568 WMI_10_2_START_EVENTID = 0x9000, 1569 WMI_10_2_END_EVENTID = 0x9FFF, 1570 WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID, 1571 WMI_10_2_ECHO_EVENTID, 1572 WMI_10_2_UPDATE_STATS_EVENTID, 1573 WMI_10_2_INST_RSSI_STATS_EVENTID, 1574 WMI_10_2_VDEV_START_RESP_EVENTID, 1575 WMI_10_2_VDEV_STANDBY_REQ_EVENTID, 1576 WMI_10_2_VDEV_RESUME_REQ_EVENTID, 1577 WMI_10_2_VDEV_STOPPED_EVENTID, 1578 WMI_10_2_PEER_STA_KICKOUT_EVENTID, 1579 WMI_10_2_HOST_SWBA_EVENTID, 1580 WMI_10_2_TBTTOFFSET_UPDATE_EVENTID, 1581 WMI_10_2_MGMT_RX_EVENTID, 1582 WMI_10_2_CHAN_INFO_EVENTID, 1583 WMI_10_2_PHYERR_EVENTID, 1584 WMI_10_2_ROAM_EVENTID, 1585 WMI_10_2_PROFILE_MATCH, 1586 WMI_10_2_DEBUG_PRINT_EVENTID, 1587 WMI_10_2_PDEV_QVIT_EVENTID, 1588 WMI_10_2_WLAN_PROFILE_DATA_EVENTID, 1589 WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID, 1590 WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID, 1591 WMI_10_2_RTT_ERROR_REPORT_EVENTID, 1592 WMI_10_2_RTT_KEEPALIVE_EVENTID, 1593 WMI_10_2_WOW_WAKEUP_HOST_EVENTID, 1594 WMI_10_2_DCS_INTERFERENCE_EVENTID, 1595 WMI_10_2_PDEV_TPC_CONFIG_EVENTID, 1596 WMI_10_2_GPIO_INPUT_EVENTID, 1597 WMI_10_2_PEER_RATECODE_LIST_EVENTID, 1598 WMI_10_2_GENERIC_BUFFER_EVENTID, 1599 WMI_10_2_MCAST_BUF_RELEASE_EVENTID, 1600 WMI_10_2_MCAST_LIST_AGEOUT_EVENTID, 1601 WMI_10_2_WDS_PEER_EVENTID, 1602 WMI_10_2_PEER_STA_PS_STATECHG_EVENTID, 1603 WMI_10_2_PDEV_TEMPERATURE_EVENTID, 1604 WMI_10_2_MU_REPORT_EVENTID, 1605 WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID, 1606 WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1, 1607 }; 1608 1609 enum wmi_10_4_cmd_id { 1610 WMI_10_4_START_CMDID = 0x9000, 1611 WMI_10_4_END_CMDID = 0x9FFF, 1612 WMI_10_4_INIT_CMDID, 1613 WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID, 1614 WMI_10_4_STOP_SCAN_CMDID, 1615 WMI_10_4_SCAN_CHAN_LIST_CMDID, 1616 WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID, 1617 WMI_10_4_SCAN_UPDATE_REQUEST_CMDID, 1618 WMI_10_4_ECHO_CMDID, 1619 WMI_10_4_PDEV_SET_REGDOMAIN_CMDID, 1620 WMI_10_4_PDEV_SET_CHANNEL_CMDID, 1621 WMI_10_4_PDEV_SET_PARAM_CMDID, 1622 WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID, 1623 WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID, 1624 WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID, 1625 WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID, 1626 WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID, 1627 WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID, 1628 WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID, 1629 WMI_10_4_PDEV_SET_QUIET_MODE_CMDID, 1630 WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1631 WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID, 1632 WMI_10_4_VDEV_CREATE_CMDID, 1633 WMI_10_4_VDEV_DELETE_CMDID, 1634 WMI_10_4_VDEV_START_REQUEST_CMDID, 1635 WMI_10_4_VDEV_RESTART_REQUEST_CMDID, 1636 WMI_10_4_VDEV_UP_CMDID, 1637 WMI_10_4_VDEV_STOP_CMDID, 1638 WMI_10_4_VDEV_DOWN_CMDID, 1639 WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID, 1640 WMI_10_4_VDEV_RESUME_RESPONSE_CMDID, 1641 WMI_10_4_VDEV_SET_PARAM_CMDID, 1642 WMI_10_4_VDEV_INSTALL_KEY_CMDID, 1643 WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID, 1644 WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID, 1645 WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID, 1646 WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID, 1647 WMI_10_4_PEER_CREATE_CMDID, 1648 WMI_10_4_PEER_DELETE_CMDID, 1649 WMI_10_4_PEER_FLUSH_TIDS_CMDID, 1650 WMI_10_4_PEER_SET_PARAM_CMDID, 1651 WMI_10_4_PEER_ASSOC_CMDID, 1652 WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID, 1653 WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID, 1654 WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID, 1655 WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID, 1656 WMI_10_4_PEER_MCAST_GROUP_CMDID, 1657 WMI_10_4_BCN_TX_CMDID, 1658 WMI_10_4_PDEV_SEND_BCN_CMDID, 1659 WMI_10_4_BCN_PRB_TMPL_CMDID, 1660 WMI_10_4_BCN_FILTER_RX_CMDID, 1661 WMI_10_4_PRB_REQ_FILTER_RX_CMDID, 1662 WMI_10_4_MGMT_TX_CMDID, 1663 WMI_10_4_PRB_TMPL_CMDID, 1664 WMI_10_4_ADDBA_CLEAR_RESP_CMDID, 1665 WMI_10_4_ADDBA_SEND_CMDID, 1666 WMI_10_4_ADDBA_STATUS_CMDID, 1667 WMI_10_4_DELBA_SEND_CMDID, 1668 WMI_10_4_ADDBA_SET_RESP_CMDID, 1669 WMI_10_4_SEND_SINGLEAMSDU_CMDID, 1670 WMI_10_4_STA_POWERSAVE_MODE_CMDID, 1671 WMI_10_4_STA_POWERSAVE_PARAM_CMDID, 1672 WMI_10_4_STA_MIMO_PS_MODE_CMDID, 1673 WMI_10_4_DBGLOG_CFG_CMDID, 1674 WMI_10_4_PDEV_DFS_ENABLE_CMDID, 1675 WMI_10_4_PDEV_DFS_DISABLE_CMDID, 1676 WMI_10_4_PDEV_QVIT_CMDID, 1677 WMI_10_4_ROAM_SCAN_MODE, 1678 WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD, 1679 WMI_10_4_ROAM_SCAN_PERIOD, 1680 WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1681 WMI_10_4_ROAM_AP_PROFILE, 1682 WMI_10_4_OFL_SCAN_ADD_AP_PROFILE, 1683 WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE, 1684 WMI_10_4_OFL_SCAN_PERIOD, 1685 WMI_10_4_P2P_DEV_SET_DEVICE_INFO, 1686 WMI_10_4_P2P_DEV_SET_DISCOVERABILITY, 1687 WMI_10_4_P2P_GO_SET_BEACON_IE, 1688 WMI_10_4_P2P_GO_SET_PROBE_RESP_IE, 1689 WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID, 1690 WMI_10_4_AP_PS_PEER_PARAM_CMDID, 1691 WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID, 1692 WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID, 1693 WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID, 1694 WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1695 WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1696 WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1697 WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1698 WMI_10_4_PDEV_SUSPEND_CMDID, 1699 WMI_10_4_PDEV_RESUME_CMDID, 1700 WMI_10_4_ADD_BCN_FILTER_CMDID, 1701 WMI_10_4_RMV_BCN_FILTER_CMDID, 1702 WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID, 1703 WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID, 1704 WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1705 WMI_10_4_WOW_ENABLE_CMDID, 1706 WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1707 WMI_10_4_RTT_MEASREQ_CMDID, 1708 WMI_10_4_RTT_TSF_CMDID, 1709 WMI_10_4_RTT_KEEPALIVE_CMDID, 1710 WMI_10_4_OEM_REQ_CMDID, 1711 WMI_10_4_NAN_CMDID, 1712 WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1713 WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1714 WMI_10_4_REQUEST_STATS_CMDID, 1715 WMI_10_4_GPIO_CONFIG_CMDID, 1716 WMI_10_4_GPIO_OUTPUT_CMDID, 1717 WMI_10_4_VDEV_RATEMASK_CMDID, 1718 WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID, 1719 WMI_10_4_GTK_OFFLOAD_CMDID, 1720 WMI_10_4_QBOOST_CFG_CMDID, 1721 WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID, 1722 WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID, 1723 WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1724 WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1725 WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1726 WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1727 WMI_10_4_VDEV_SET_KEEPALIVE_CMDID, 1728 WMI_10_4_VDEV_GET_KEEPALIVE_CMDID, 1729 WMI_10_4_FORCE_FW_HANG_CMDID, 1730 WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1731 WMI_10_4_PDEV_SET_CTL_TABLE_CMDID, 1732 WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1733 WMI_10_4_PDEV_RATEPWR_TABLE_CMDID, 1734 WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1735 WMI_10_4_PDEV_FIPS_CMDID, 1736 WMI_10_4_TT_SET_CONF_CMDID, 1737 WMI_10_4_FWTEST_CMDID, 1738 WMI_10_4_VDEV_ATF_REQUEST_CMDID, 1739 WMI_10_4_PEER_ATF_REQUEST_CMDID, 1740 WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID, 1741 WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID, 1742 WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID, 1743 WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID, 1744 WMI_10_4_PDEV_GET_TPC_CMDID, 1745 WMI_10_4_PDEV_GET_AST_INFO_CMDID, 1746 WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID, 1747 WMI_10_4_PDEV_GET_TEMPERATURE_CMDID, 1748 WMI_10_4_PDEV_GET_INFO_CMDID, 1749 WMI_10_4_VDEV_GET_INFO_CMDID, 1750 WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID, 1751 WMI_10_4_MU_CAL_START_CMDID, 1752 WMI_10_4_SET_CCA_PARAMS_CMDID, 1753 WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1754 WMI_10_4_EXT_RESOURCE_CFG_CMDID, 1755 WMI_10_4_VDEV_SET_IE_CMDID, 1756 WMI_10_4_SET_LTEU_CONFIG_CMDID, 1757 WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID, 1758 WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID, 1759 WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG, 1760 WMI_10_4_PEER_BWF_REQUEST_CMDID, 1761 WMI_10_4_BTCOEX_CFG_CMDID, 1762 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID, 1763 WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID, 1764 WMI_10_4_PEER_GID_USERPOS_LIST_CMDID, 1765 WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID, 1766 WMI_10_4_COEX_VERSION_CFG_CMID, 1767 WMI_10_4_PDEV_GET_RX_FILTER_CMDID, 1768 WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID, 1769 WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID, 1770 WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID, 1771 WMI_10_4_CONFIG_SMART_LOGGING_CMDID, 1772 WMI_10_4_DEBUG_FATAL_CONDITION_CMDID, 1773 WMI_10_4_GET_TSF_TIMER_CMDID, 1774 WMI_10_4_PDEV_GET_TPC_TABLE_CMDID, 1775 WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID, 1776 WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID, 1777 WMI_10_4_TDLS_SET_STATE_CMDID, 1778 WMI_10_4_TDLS_PEER_UPDATE_CMDID, 1779 WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID, 1780 WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1, 1781 }; 1782 1783 enum wmi_10_4_event_id { 1784 WMI_10_4_SERVICE_READY_EVENTID = 0x8000, 1785 WMI_10_4_READY_EVENTID, 1786 WMI_10_4_DEBUG_MESG_EVENTID, 1787 WMI_10_4_START_EVENTID = 0x9000, 1788 WMI_10_4_END_EVENTID = 0x9FFF, 1789 WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID, 1790 WMI_10_4_ECHO_EVENTID, 1791 WMI_10_4_UPDATE_STATS_EVENTID, 1792 WMI_10_4_INST_RSSI_STATS_EVENTID, 1793 WMI_10_4_VDEV_START_RESP_EVENTID, 1794 WMI_10_4_VDEV_STANDBY_REQ_EVENTID, 1795 WMI_10_4_VDEV_RESUME_REQ_EVENTID, 1796 WMI_10_4_VDEV_STOPPED_EVENTID, 1797 WMI_10_4_PEER_STA_KICKOUT_EVENTID, 1798 WMI_10_4_HOST_SWBA_EVENTID, 1799 WMI_10_4_TBTTOFFSET_UPDATE_EVENTID, 1800 WMI_10_4_MGMT_RX_EVENTID, 1801 WMI_10_4_CHAN_INFO_EVENTID, 1802 WMI_10_4_PHYERR_EVENTID, 1803 WMI_10_4_ROAM_EVENTID, 1804 WMI_10_4_PROFILE_MATCH, 1805 WMI_10_4_DEBUG_PRINT_EVENTID, 1806 WMI_10_4_PDEV_QVIT_EVENTID, 1807 WMI_10_4_WLAN_PROFILE_DATA_EVENTID, 1808 WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID, 1809 WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID, 1810 WMI_10_4_RTT_ERROR_REPORT_EVENTID, 1811 WMI_10_4_RTT_KEEPALIVE_EVENTID, 1812 WMI_10_4_OEM_CAPABILITY_EVENTID, 1813 WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID, 1814 WMI_10_4_OEM_ERROR_REPORT_EVENTID, 1815 WMI_10_4_NAN_EVENTID, 1816 WMI_10_4_WOW_WAKEUP_HOST_EVENTID, 1817 WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID, 1818 WMI_10_4_GTK_REKEY_FAIL_EVENTID, 1819 WMI_10_4_DCS_INTERFERENCE_EVENTID, 1820 WMI_10_4_PDEV_TPC_CONFIG_EVENTID, 1821 WMI_10_4_CSA_HANDLING_EVENTID, 1822 WMI_10_4_GPIO_INPUT_EVENTID, 1823 WMI_10_4_PEER_RATECODE_LIST_EVENTID, 1824 WMI_10_4_GENERIC_BUFFER_EVENTID, 1825 WMI_10_4_MCAST_BUF_RELEASE_EVENTID, 1826 WMI_10_4_MCAST_LIST_AGEOUT_EVENTID, 1827 WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID, 1828 WMI_10_4_WDS_PEER_EVENTID, 1829 WMI_10_4_PEER_STA_PS_STATECHG_EVENTID, 1830 WMI_10_4_PDEV_FIPS_EVENTID, 1831 WMI_10_4_TT_STATS_EVENTID, 1832 WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID, 1833 WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID, 1834 WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID, 1835 WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID, 1836 WMI_10_4_PDEV_NFCAL_POWER_EVENTID, 1837 WMI_10_4_PDEV_TPC_EVENTID, 1838 WMI_10_4_PDEV_GET_AST_INFO_EVENTID, 1839 WMI_10_4_PDEV_TEMPERATURE_EVENTID, 1840 WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID, 1841 WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID, 1842 WMI_10_4_MU_REPORT_EVENTID, 1843 WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID, 1844 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID, 1845 WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID, 1846 WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID, 1847 WMI_10_4_ATF_PEER_STATS_EVENTID, 1848 WMI_10_4_PDEV_GET_RX_FILTER_EVENTID, 1849 WMI_10_4_NAC_RSSI_EVENTID, 1850 WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID, 1851 WMI_10_4_GET_TSF_TIMER_RESP_EVENTID, 1852 WMI_10_4_PDEV_TPC_TABLE_EVENTID, 1853 WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID, 1854 WMI_10_4_TDLS_PEER_EVENTID, 1855 WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1, 1856 }; 1857 1858 enum wmi_phy_mode { 1859 MODE_11A = 0, /* 11a Mode */ 1860 MODE_11G = 1, /* 11b/g Mode */ 1861 MODE_11B = 2, /* 11b Mode */ 1862 MODE_11GONLY = 3, /* 11g only Mode */ 1863 MODE_11NA_HT20 = 4, /* 11a HT20 mode */ 1864 MODE_11NG_HT20 = 5, /* 11g HT20 mode */ 1865 MODE_11NA_HT40 = 6, /* 11a HT40 mode */ 1866 MODE_11NG_HT40 = 7, /* 11g HT40 mode */ 1867 MODE_11AC_VHT20 = 8, 1868 MODE_11AC_VHT40 = 9, 1869 MODE_11AC_VHT80 = 10, 1870 /* MODE_11AC_VHT160 = 11, */ 1871 MODE_11AC_VHT20_2G = 11, 1872 MODE_11AC_VHT40_2G = 12, 1873 MODE_11AC_VHT80_2G = 13, 1874 MODE_11AC_VHT80_80 = 14, 1875 MODE_11AC_VHT160 = 15, 1876 MODE_UNKNOWN = 16, 1877 MODE_MAX = 16 1878 }; 1879 1880 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode) 1881 { 1882 switch (mode) { 1883 case MODE_11A: 1884 return "11a"; 1885 case MODE_11G: 1886 return "11g"; 1887 case MODE_11B: 1888 return "11b"; 1889 case MODE_11GONLY: 1890 return "11gonly"; 1891 case MODE_11NA_HT20: 1892 return "11na-ht20"; 1893 case MODE_11NG_HT20: 1894 return "11ng-ht20"; 1895 case MODE_11NA_HT40: 1896 return "11na-ht40"; 1897 case MODE_11NG_HT40: 1898 return "11ng-ht40"; 1899 case MODE_11AC_VHT20: 1900 return "11ac-vht20"; 1901 case MODE_11AC_VHT40: 1902 return "11ac-vht40"; 1903 case MODE_11AC_VHT80: 1904 return "11ac-vht80"; 1905 case MODE_11AC_VHT160: 1906 return "11ac-vht160"; 1907 case MODE_11AC_VHT80_80: 1908 return "11ac-vht80+80"; 1909 case MODE_11AC_VHT20_2G: 1910 return "11ac-vht20-2g"; 1911 case MODE_11AC_VHT40_2G: 1912 return "11ac-vht40-2g"; 1913 case MODE_11AC_VHT80_2G: 1914 return "11ac-vht80-2g"; 1915 case MODE_UNKNOWN: 1916 /* skip */ 1917 break; 1918 1919 /* no default handler to allow compiler to check that the 1920 * enum is fully handled 1921 */ 1922 }; 1923 1924 return "<unknown>"; 1925 } 1926 1927 #define WMI_CHAN_LIST_TAG 0x1 1928 #define WMI_SSID_LIST_TAG 0x2 1929 #define WMI_BSSID_LIST_TAG 0x3 1930 #define WMI_IE_TAG 0x4 1931 1932 struct wmi_channel { 1933 __le32 mhz; 1934 __le32 band_center_freq1; 1935 __le32 band_center_freq2; /* valid for 11ac, 80plus80 */ 1936 union { 1937 __le32 flags; /* WMI_CHAN_FLAG_ */ 1938 struct { 1939 u8 mode; /* only 6 LSBs */ 1940 } __packed; 1941 } __packed; 1942 union { 1943 __le32 reginfo0; 1944 struct { 1945 /* note: power unit is 0.5 dBm */ 1946 u8 min_power; 1947 u8 max_power; 1948 u8 reg_power; 1949 u8 reg_classid; 1950 } __packed; 1951 } __packed; 1952 union { 1953 __le32 reginfo1; 1954 struct { 1955 u8 antenna_max; 1956 u8 max_tx_power; 1957 } __packed; 1958 } __packed; 1959 } __packed; 1960 1961 struct wmi_channel_arg { 1962 u32 freq; 1963 u32 band_center_freq1; 1964 u32 band_center_freq2; 1965 bool passive; 1966 bool allow_ibss; 1967 bool allow_ht; 1968 bool allow_vht; 1969 bool ht40plus; 1970 bool chan_radar; 1971 /* note: power unit is 0.5 dBm */ 1972 u32 min_power; 1973 u32 max_power; 1974 u32 max_reg_power; 1975 u32 max_antenna_gain; 1976 u32 reg_class_id; 1977 enum wmi_phy_mode mode; 1978 }; 1979 1980 enum wmi_channel_change_cause { 1981 WMI_CHANNEL_CHANGE_CAUSE_NONE = 0, 1982 WMI_CHANNEL_CHANGE_CAUSE_CSA, 1983 }; 1984 1985 #define WMI_CHAN_FLAG_HT40_PLUS (1 << 6) 1986 #define WMI_CHAN_FLAG_PASSIVE (1 << 7) 1987 #define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8) 1988 #define WMI_CHAN_FLAG_AP_DISABLED (1 << 9) 1989 #define WMI_CHAN_FLAG_DFS (1 << 10) 1990 #define WMI_CHAN_FLAG_ALLOW_HT (1 << 11) 1991 #define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12) 1992 1993 /* Indicate reason for channel switch */ 1994 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13) 1995 1996 #define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */ 1997 1998 /* HT Capabilities*/ 1999 #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ 2000 #define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */ 2001 #define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ 2002 #define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ 2003 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3 2004 #define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ 2005 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4 2006 #define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */ 2007 #define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ 2008 #define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ 2009 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 2010 #define WMI_HT_CAP_HT40_SGI 0x0800 2011 2012 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \ 2013 WMI_HT_CAP_HT20_SGI | \ 2014 WMI_HT_CAP_HT40_SGI | \ 2015 WMI_HT_CAP_TX_STBC | \ 2016 WMI_HT_CAP_RX_STBC | \ 2017 WMI_HT_CAP_LDPC) 2018 2019 /* 2020 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information 2021 * field. The fields not defined here are not supported, or reserved. 2022 * Do not change these masks and if you have to add new one follow the 2023 * bitmask as specified by 802.11ac draft. 2024 */ 2025 2026 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 2027 #define WMI_VHT_CAP_RX_LDPC 0x00000010 2028 #define WMI_VHT_CAP_SGI_80MHZ 0x00000020 2029 #define WMI_VHT_CAP_SGI_160MHZ 0x00000040 2030 #define WMI_VHT_CAP_TX_STBC 0x00000080 2031 #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300 2032 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8 2033 #define WMI_VHT_CAP_SU_BFER 0x00000800 2034 #define WMI_VHT_CAP_SU_BFEE 0x00001000 2035 #define WMI_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000 2036 #define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13 2037 #define WMI_VHT_CAP_MAX_SND_DIM_MASK 0x00070000 2038 #define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16 2039 #define WMI_VHT_CAP_MU_BFER 0x00080000 2040 #define WMI_VHT_CAP_MU_BFEE 0x00100000 2041 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 2042 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23 2043 #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000 2044 #define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000 2045 2046 /* The following also refer for max HT AMSDU */ 2047 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000 2048 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001 2049 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 2050 2051 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \ 2052 WMI_VHT_CAP_RX_LDPC | \ 2053 WMI_VHT_CAP_SGI_80MHZ | \ 2054 WMI_VHT_CAP_TX_STBC | \ 2055 WMI_VHT_CAP_RX_STBC_MASK | \ 2056 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \ 2057 WMI_VHT_CAP_RX_FIXED_ANT | \ 2058 WMI_VHT_CAP_TX_FIXED_ANT) 2059 2060 /* 2061 * Interested readers refer to Rx/Tx MCS Map definition as defined in 2062 * 802.11ac 2063 */ 2064 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) 2065 #define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 2066 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 2067 2068 enum { 2069 REGDMN_MODE_11A = 0x00001, /* 11a channels */ 2070 REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */ 2071 REGDMN_MODE_11B = 0x00004, /* 11b channels */ 2072 REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */ 2073 REGDMN_MODE_11G = 0x00008, /* XXX historical */ 2074 REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */ 2075 REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */ 2076 REGDMN_MODE_XR = 0x00100, /* XR channels */ 2077 REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */ 2078 REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */ 2079 REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */ 2080 REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */ 2081 REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */ 2082 REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */ 2083 REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */ 2084 REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */ 2085 REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */ 2086 REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */ 2087 REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */ 2088 REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */ 2089 REGDMN_MODE_11AC_VHT160 = 0x200000, /* 5Ghz, VHT160 channels */ 2090 REGDMN_MODE_11AC_VHT80_80 = 0x400000, /* 5Ghz, VHT80+80 channels */ 2091 REGDMN_MODE_ALL = 0xffffffff 2092 }; 2093 2094 #define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001 2095 #define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002 2096 #define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004 2097 2098 /* regulatory capabilities */ 2099 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040 2100 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080 2101 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100 2102 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200 2103 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400 2104 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800 2105 2106 struct hal_reg_capabilities { 2107 /* regdomain value specified in EEPROM */ 2108 __le32 eeprom_rd; 2109 /*regdomain */ 2110 __le32 eeprom_rd_ext; 2111 /* CAP1 capabilities bit map. */ 2112 __le32 regcap1; 2113 /* REGDMN EEPROM CAP. */ 2114 __le32 regcap2; 2115 /* REGDMN MODE */ 2116 __le32 wireless_modes; 2117 __le32 low_2ghz_chan; 2118 __le32 high_2ghz_chan; 2119 __le32 low_5ghz_chan; 2120 __le32 high_5ghz_chan; 2121 } __packed; 2122 2123 enum wlan_mode_capability { 2124 WHAL_WLAN_11A_CAPABILITY = 0x1, 2125 WHAL_WLAN_11G_CAPABILITY = 0x2, 2126 WHAL_WLAN_11AG_CAPABILITY = 0x3, 2127 }; 2128 2129 /* structure used by FW for requesting host memory */ 2130 struct wlan_host_mem_req { 2131 /* ID of the request */ 2132 __le32 req_id; 2133 /* size of the of each unit */ 2134 __le32 unit_size; 2135 /* flags to indicate that 2136 * the number units is dependent 2137 * on number of resources(num vdevs num peers .. etc) 2138 */ 2139 __le32 num_unit_info; 2140 /* 2141 * actual number of units to allocate . if flags in the num_unit_info 2142 * indicate that number of units is tied to number of a particular 2143 * resource to allocate then num_units filed is set to 0 and host 2144 * will derive the number units from number of the resources it is 2145 * requesting. 2146 */ 2147 __le32 num_units; 2148 } __packed; 2149 2150 /* 2151 * The following struct holds optional payload for 2152 * wmi_service_ready_event,e.g., 11ac pass some of the 2153 * device capability to the host. 2154 */ 2155 struct wmi_service_ready_event { 2156 __le32 sw_version; 2157 __le32 sw_version_1; 2158 __le32 abi_version; 2159 /* WMI_PHY_CAPABILITY */ 2160 __le32 phy_capability; 2161 /* Maximum number of frag table entries that SW will populate less 1 */ 2162 __le32 max_frag_entry; 2163 __le32 wmi_service_bitmap[16]; 2164 __le32 num_rf_chains; 2165 /* 2166 * The following field is only valid for service type 2167 * WMI_SERVICE_11AC 2168 */ 2169 __le32 ht_cap_info; /* WMI HT Capability */ 2170 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2171 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2172 __le32 hw_min_tx_power; 2173 __le32 hw_max_tx_power; 2174 struct hal_reg_capabilities hal_reg_capabilities; 2175 __le32 sys_cap_info; 2176 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2177 /* 2178 * Max beacon and Probe Response IE offload size 2179 * (includes optional P2P IEs) 2180 */ 2181 __le32 max_bcn_ie_size; 2182 /* 2183 * request to host to allocate a chuck of memory and pss it down to FW 2184 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2185 * data structures. Only valid for low latency interfaces like PCIE 2186 * where FW can access this memory directly (or) by DMA. 2187 */ 2188 __le32 num_mem_reqs; 2189 struct wlan_host_mem_req mem_reqs[0]; 2190 } __packed; 2191 2192 /* This is the definition from 10.X firmware branch */ 2193 struct wmi_10x_service_ready_event { 2194 __le32 sw_version; 2195 __le32 abi_version; 2196 2197 /* WMI_PHY_CAPABILITY */ 2198 __le32 phy_capability; 2199 2200 /* Maximum number of frag table entries that SW will populate less 1 */ 2201 __le32 max_frag_entry; 2202 __le32 wmi_service_bitmap[16]; 2203 __le32 num_rf_chains; 2204 2205 /* 2206 * The following field is only valid for service type 2207 * WMI_SERVICE_11AC 2208 */ 2209 __le32 ht_cap_info; /* WMI HT Capability */ 2210 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2211 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2212 __le32 hw_min_tx_power; 2213 __le32 hw_max_tx_power; 2214 2215 struct hal_reg_capabilities hal_reg_capabilities; 2216 2217 __le32 sys_cap_info; 2218 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2219 2220 /* 2221 * request to host to allocate a chuck of memory and pss it down to FW 2222 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2223 * data structures. Only valid for low latency interfaces like PCIE 2224 * where FW can access this memory directly (or) by DMA. 2225 */ 2226 __le32 num_mem_reqs; 2227 2228 struct wlan_host_mem_req mem_reqs[0]; 2229 } __packed; 2230 2231 #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ) 2232 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ) 2233 2234 struct wmi_ready_event { 2235 __le32 sw_version; 2236 __le32 abi_version; 2237 struct wmi_mac_addr mac_addr; 2238 __le32 status; 2239 } __packed; 2240 2241 struct wmi_resource_config { 2242 /* number of virtual devices (VAPs) to support */ 2243 __le32 num_vdevs; 2244 2245 /* number of peer nodes to support */ 2246 __le32 num_peers; 2247 2248 /* 2249 * In offload mode target supports features like WOW, chatter and 2250 * other protocol offloads. In order to support them some 2251 * functionalities like reorder buffering, PN checking need to be 2252 * done in target. This determines maximum number of peers supported 2253 * by target in offload mode 2254 */ 2255 __le32 num_offload_peers; 2256 2257 /* For target-based RX reordering */ 2258 __le32 num_offload_reorder_bufs; 2259 2260 /* number of keys per peer */ 2261 __le32 num_peer_keys; 2262 2263 /* total number of TX/RX data TIDs */ 2264 __le32 num_tids; 2265 2266 /* 2267 * max skid for resolving hash collisions 2268 * 2269 * The address search table is sparse, so that if two MAC addresses 2270 * result in the same hash value, the second of these conflicting 2271 * entries can slide to the next index in the address search table, 2272 * and use it, if it is unoccupied. This ast_skid_limit parameter 2273 * specifies the upper bound on how many subsequent indices to search 2274 * over to find an unoccupied space. 2275 */ 2276 __le32 ast_skid_limit; 2277 2278 /* 2279 * the nominal chain mask for transmit 2280 * 2281 * The chain mask may be modified dynamically, e.g. to operate AP 2282 * tx with a reduced number of chains if no clients are associated. 2283 * This configuration parameter specifies the nominal chain-mask that 2284 * should be used when not operating with a reduced set of tx chains. 2285 */ 2286 __le32 tx_chain_mask; 2287 2288 /* 2289 * the nominal chain mask for receive 2290 * 2291 * The chain mask may be modified dynamically, e.g. for a client 2292 * to use a reduced number of chains for receive if the traffic to 2293 * the client is low enough that it doesn't require downlink MIMO 2294 * or antenna diversity. 2295 * This configuration parameter specifies the nominal chain-mask that 2296 * should be used when not operating with a reduced set of rx chains. 2297 */ 2298 __le32 rx_chain_mask; 2299 2300 /* 2301 * what rx reorder timeout (ms) to use for the AC 2302 * 2303 * Each WMM access class (voice, video, best-effort, background) will 2304 * have its own timeout value to dictate how long to wait for missing 2305 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2306 * already been received. 2307 * This parameter specifies the timeout in milliseconds for each 2308 * class. 2309 */ 2310 __le32 rx_timeout_pri_vi; 2311 __le32 rx_timeout_pri_vo; 2312 __le32 rx_timeout_pri_be; 2313 __le32 rx_timeout_pri_bk; 2314 2315 /* 2316 * what mode the rx should decap packets to 2317 * 2318 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2319 * THis setting also determines the default TX behavior, however TX 2320 * behavior can be modified on a per VAP basis during VAP init 2321 */ 2322 __le32 rx_decap_mode; 2323 2324 /* what is the maximum number of scan requests that can be queued */ 2325 __le32 scan_max_pending_reqs; 2326 2327 /* maximum VDEV that could use BMISS offload */ 2328 __le32 bmiss_offload_max_vdev; 2329 2330 /* maximum VDEV that could use offload roaming */ 2331 __le32 roam_offload_max_vdev; 2332 2333 /* maximum AP profiles that would push to offload roaming */ 2334 __le32 roam_offload_max_ap_profiles; 2335 2336 /* 2337 * how many groups to use for mcast->ucast conversion 2338 * 2339 * The target's WAL maintains a table to hold information regarding 2340 * which peers belong to a given multicast group, so that if 2341 * multicast->unicast conversion is enabled, the target can convert 2342 * multicast tx frames to a series of unicast tx frames, to each 2343 * peer within the multicast group. 2344 This num_mcast_groups configuration parameter tells the target how 2345 * many multicast groups to provide storage for within its multicast 2346 * group membership table. 2347 */ 2348 __le32 num_mcast_groups; 2349 2350 /* 2351 * size to alloc for the mcast membership table 2352 * 2353 * This num_mcast_table_elems configuration parameter tells the 2354 * target how many peer elements it needs to provide storage for in 2355 * its multicast group membership table. 2356 * These multicast group membership table elements are shared by the 2357 * multicast groups stored within the table. 2358 */ 2359 __le32 num_mcast_table_elems; 2360 2361 /* 2362 * whether/how to do multicast->unicast conversion 2363 * 2364 * This configuration parameter specifies whether the target should 2365 * perform multicast --> unicast conversion on transmit, and if so, 2366 * what to do if it finds no entries in its multicast group 2367 * membership table for the multicast IP address in the tx frame. 2368 * Configuration value: 2369 * 0 -> Do not perform multicast to unicast conversion. 2370 * 1 -> Convert multicast frames to unicast, if the IP multicast 2371 * address from the tx frame is found in the multicast group 2372 * membership table. If the IP multicast address is not found, 2373 * drop the frame. 2374 * 2 -> Convert multicast frames to unicast, if the IP multicast 2375 * address from the tx frame is found in the multicast group 2376 * membership table. If the IP multicast address is not found, 2377 * transmit the frame as multicast. 2378 */ 2379 __le32 mcast2ucast_mode; 2380 2381 /* 2382 * how much memory to allocate for a tx PPDU dbg log 2383 * 2384 * This parameter controls how much memory the target will allocate 2385 * to store a log of tx PPDU meta-information (how large the PPDU 2386 * was, when it was sent, whether it was successful, etc.) 2387 */ 2388 __le32 tx_dbg_log_size; 2389 2390 /* how many AST entries to be allocated for WDS */ 2391 __le32 num_wds_entries; 2392 2393 /* 2394 * MAC DMA burst size, e.g., For target PCI limit can be 2395 * 0 -default, 1 256B 2396 */ 2397 __le32 dma_burst_size; 2398 2399 /* 2400 * Fixed delimiters to be inserted after every MPDU to 2401 * account for interface latency to avoid underrun. 2402 */ 2403 __le32 mac_aggr_delim; 2404 2405 /* 2406 * determine whether target is responsible for detecting duplicate 2407 * non-aggregate MPDU and timing out stale fragments. 2408 * 2409 * A-MPDU reordering is always performed on the target. 2410 * 2411 * 0: target responsible for frag timeout and dup checking 2412 * 1: host responsible for frag timeout and dup checking 2413 */ 2414 __le32 rx_skip_defrag_timeout_dup_detection_check; 2415 2416 /* 2417 * Configuration for VoW : 2418 * No of Video Nodes to be supported 2419 * and Max no of descriptors for each Video link (node). 2420 */ 2421 __le32 vow_config; 2422 2423 /* maximum VDEV that could use GTK offload */ 2424 __le32 gtk_offload_max_vdev; 2425 2426 /* Number of msdu descriptors target should use */ 2427 __le32 num_msdu_desc; 2428 2429 /* 2430 * Max. number of Tx fragments per MSDU 2431 * This parameter controls the max number of Tx fragments per MSDU. 2432 * This is sent by the target as part of the WMI_SERVICE_READY event 2433 * and is overridden by the OS shim as required. 2434 */ 2435 __le32 max_frag_entries; 2436 } __packed; 2437 2438 struct wmi_resource_config_10x { 2439 /* number of virtual devices (VAPs) to support */ 2440 __le32 num_vdevs; 2441 2442 /* number of peer nodes to support */ 2443 __le32 num_peers; 2444 2445 /* number of keys per peer */ 2446 __le32 num_peer_keys; 2447 2448 /* total number of TX/RX data TIDs */ 2449 __le32 num_tids; 2450 2451 /* 2452 * max skid for resolving hash collisions 2453 * 2454 * The address search table is sparse, so that if two MAC addresses 2455 * result in the same hash value, the second of these conflicting 2456 * entries can slide to the next index in the address search table, 2457 * and use it, if it is unoccupied. This ast_skid_limit parameter 2458 * specifies the upper bound on how many subsequent indices to search 2459 * over to find an unoccupied space. 2460 */ 2461 __le32 ast_skid_limit; 2462 2463 /* 2464 * the nominal chain mask for transmit 2465 * 2466 * The chain mask may be modified dynamically, e.g. to operate AP 2467 * tx with a reduced number of chains if no clients are associated. 2468 * This configuration parameter specifies the nominal chain-mask that 2469 * should be used when not operating with a reduced set of tx chains. 2470 */ 2471 __le32 tx_chain_mask; 2472 2473 /* 2474 * the nominal chain mask for receive 2475 * 2476 * The chain mask may be modified dynamically, e.g. for a client 2477 * to use a reduced number of chains for receive if the traffic to 2478 * the client is low enough that it doesn't require downlink MIMO 2479 * or antenna diversity. 2480 * This configuration parameter specifies the nominal chain-mask that 2481 * should be used when not operating with a reduced set of rx chains. 2482 */ 2483 __le32 rx_chain_mask; 2484 2485 /* 2486 * what rx reorder timeout (ms) to use for the AC 2487 * 2488 * Each WMM access class (voice, video, best-effort, background) will 2489 * have its own timeout value to dictate how long to wait for missing 2490 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2491 * already been received. 2492 * This parameter specifies the timeout in milliseconds for each 2493 * class. 2494 */ 2495 __le32 rx_timeout_pri_vi; 2496 __le32 rx_timeout_pri_vo; 2497 __le32 rx_timeout_pri_be; 2498 __le32 rx_timeout_pri_bk; 2499 2500 /* 2501 * what mode the rx should decap packets to 2502 * 2503 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2504 * THis setting also determines the default TX behavior, however TX 2505 * behavior can be modified on a per VAP basis during VAP init 2506 */ 2507 __le32 rx_decap_mode; 2508 2509 /* what is the maximum number of scan requests that can be queued */ 2510 __le32 scan_max_pending_reqs; 2511 2512 /* maximum VDEV that could use BMISS offload */ 2513 __le32 bmiss_offload_max_vdev; 2514 2515 /* maximum VDEV that could use offload roaming */ 2516 __le32 roam_offload_max_vdev; 2517 2518 /* maximum AP profiles that would push to offload roaming */ 2519 __le32 roam_offload_max_ap_profiles; 2520 2521 /* 2522 * how many groups to use for mcast->ucast conversion 2523 * 2524 * The target's WAL maintains a table to hold information regarding 2525 * which peers belong to a given multicast group, so that if 2526 * multicast->unicast conversion is enabled, the target can convert 2527 * multicast tx frames to a series of unicast tx frames, to each 2528 * peer within the multicast group. 2529 This num_mcast_groups configuration parameter tells the target how 2530 * many multicast groups to provide storage for within its multicast 2531 * group membership table. 2532 */ 2533 __le32 num_mcast_groups; 2534 2535 /* 2536 * size to alloc for the mcast membership table 2537 * 2538 * This num_mcast_table_elems configuration parameter tells the 2539 * target how many peer elements it needs to provide storage for in 2540 * its multicast group membership table. 2541 * These multicast group membership table elements are shared by the 2542 * multicast groups stored within the table. 2543 */ 2544 __le32 num_mcast_table_elems; 2545 2546 /* 2547 * whether/how to do multicast->unicast conversion 2548 * 2549 * This configuration parameter specifies whether the target should 2550 * perform multicast --> unicast conversion on transmit, and if so, 2551 * what to do if it finds no entries in its multicast group 2552 * membership table for the multicast IP address in the tx frame. 2553 * Configuration value: 2554 * 0 -> Do not perform multicast to unicast conversion. 2555 * 1 -> Convert multicast frames to unicast, if the IP multicast 2556 * address from the tx frame is found in the multicast group 2557 * membership table. If the IP multicast address is not found, 2558 * drop the frame. 2559 * 2 -> Convert multicast frames to unicast, if the IP multicast 2560 * address from the tx frame is found in the multicast group 2561 * membership table. If the IP multicast address is not found, 2562 * transmit the frame as multicast. 2563 */ 2564 __le32 mcast2ucast_mode; 2565 2566 /* 2567 * how much memory to allocate for a tx PPDU dbg log 2568 * 2569 * This parameter controls how much memory the target will allocate 2570 * to store a log of tx PPDU meta-information (how large the PPDU 2571 * was, when it was sent, whether it was successful, etc.) 2572 */ 2573 __le32 tx_dbg_log_size; 2574 2575 /* how many AST entries to be allocated for WDS */ 2576 __le32 num_wds_entries; 2577 2578 /* 2579 * MAC DMA burst size, e.g., For target PCI limit can be 2580 * 0 -default, 1 256B 2581 */ 2582 __le32 dma_burst_size; 2583 2584 /* 2585 * Fixed delimiters to be inserted after every MPDU to 2586 * account for interface latency to avoid underrun. 2587 */ 2588 __le32 mac_aggr_delim; 2589 2590 /* 2591 * determine whether target is responsible for detecting duplicate 2592 * non-aggregate MPDU and timing out stale fragments. 2593 * 2594 * A-MPDU reordering is always performed on the target. 2595 * 2596 * 0: target responsible for frag timeout and dup checking 2597 * 1: host responsible for frag timeout and dup checking 2598 */ 2599 __le32 rx_skip_defrag_timeout_dup_detection_check; 2600 2601 /* 2602 * Configuration for VoW : 2603 * No of Video Nodes to be supported 2604 * and Max no of descriptors for each Video link (node). 2605 */ 2606 __le32 vow_config; 2607 2608 /* Number of msdu descriptors target should use */ 2609 __le32 num_msdu_desc; 2610 2611 /* 2612 * Max. number of Tx fragments per MSDU 2613 * This parameter controls the max number of Tx fragments per MSDU. 2614 * This is sent by the target as part of the WMI_SERVICE_READY event 2615 * and is overridden by the OS shim as required. 2616 */ 2617 __le32 max_frag_entries; 2618 } __packed; 2619 2620 enum wmi_10_2_feature_mask { 2621 WMI_10_2_RX_BATCH_MODE = BIT(0), 2622 WMI_10_2_ATF_CONFIG = BIT(1), 2623 WMI_10_2_COEX_GPIO = BIT(3), 2624 WMI_10_2_BSS_CHAN_INFO = BIT(6), 2625 WMI_10_2_PEER_STATS = BIT(7), 2626 }; 2627 2628 struct wmi_resource_config_10_2 { 2629 struct wmi_resource_config_10x common; 2630 __le32 max_peer_ext_stats; 2631 __le32 smart_ant_cap; /* 0-disable, 1-enable */ 2632 __le32 bk_min_free; 2633 __le32 be_min_free; 2634 __le32 vi_min_free; 2635 __le32 vo_min_free; 2636 __le32 feature_mask; 2637 } __packed; 2638 2639 #define NUM_UNITS_IS_NUM_VDEVS BIT(0) 2640 #define NUM_UNITS_IS_NUM_PEERS BIT(1) 2641 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2) 2642 2643 struct wmi_resource_config_10_4 { 2644 /* Number of virtual devices (VAPs) to support */ 2645 __le32 num_vdevs; 2646 2647 /* Number of peer nodes to support */ 2648 __le32 num_peers; 2649 2650 /* Number of active peer nodes to support */ 2651 __le32 num_active_peers; 2652 2653 /* In offload mode, target supports features like WOW, chatter and other 2654 * protocol offloads. In order to support them some functionalities like 2655 * reorder buffering, PN checking need to be done in target. 2656 * This determines maximum number of peers supported by target in 2657 * offload mode. 2658 */ 2659 __le32 num_offload_peers; 2660 2661 /* Number of reorder buffers available for doing target based reorder 2662 * Rx reorder buffering 2663 */ 2664 __le32 num_offload_reorder_buffs; 2665 2666 /* Number of keys per peer */ 2667 __le32 num_peer_keys; 2668 2669 /* Total number of TX/RX data TIDs */ 2670 __le32 num_tids; 2671 2672 /* Max skid for resolving hash collisions. 2673 * The address search table is sparse, so that if two MAC addresses 2674 * result in the same hash value, the second of these conflicting 2675 * entries can slide to the next index in the address search table, 2676 * and use it, if it is unoccupied. This ast_skid_limit parameter 2677 * specifies the upper bound on how many subsequent indices to search 2678 * over to find an unoccupied space. 2679 */ 2680 __le32 ast_skid_limit; 2681 2682 /* The nominal chain mask for transmit. 2683 * The chain mask may be modified dynamically, e.g. to operate AP tx 2684 * with a reduced number of chains if no clients are associated. 2685 * This configuration parameter specifies the nominal chain-mask that 2686 * should be used when not operating with a reduced set of tx chains. 2687 */ 2688 __le32 tx_chain_mask; 2689 2690 /* The nominal chain mask for receive. 2691 * The chain mask may be modified dynamically, e.g. for a client to use 2692 * a reduced number of chains for receive if the traffic to the client 2693 * is low enough that it doesn't require downlink MIMO or antenna 2694 * diversity. This configuration parameter specifies the nominal 2695 * chain-mask that should be used when not operating with a reduced 2696 * set of rx chains. 2697 */ 2698 __le32 rx_chain_mask; 2699 2700 /* What rx reorder timeout (ms) to use for the AC. 2701 * Each WMM access class (voice, video, best-effort, background) will 2702 * have its own timeout value to dictate how long to wait for missing 2703 * rx MPDUs to arrive before flushing subsequent MPDUs that have already 2704 * been received. This parameter specifies the timeout in milliseconds 2705 * for each class. 2706 */ 2707 __le32 rx_timeout_pri[4]; 2708 2709 /* What mode the rx should decap packets to. 2710 * MAC can decap to RAW (no decap), native wifi or Ethernet types. 2711 * This setting also determines the default TX behavior, however TX 2712 * behavior can be modified on a per VAP basis during VAP init 2713 */ 2714 __le32 rx_decap_mode; 2715 2716 __le32 scan_max_pending_req; 2717 2718 __le32 bmiss_offload_max_vdev; 2719 2720 __le32 roam_offload_max_vdev; 2721 2722 __le32 roam_offload_max_ap_profiles; 2723 2724 /* How many groups to use for mcast->ucast conversion. 2725 * The target's WAL maintains a table to hold information regarding 2726 * which peers belong to a given multicast group, so that if 2727 * multicast->unicast conversion is enabled, the target can convert 2728 * multicast tx frames to a series of unicast tx frames, to each peer 2729 * within the multicast group. This num_mcast_groups configuration 2730 * parameter tells the target how many multicast groups to provide 2731 * storage for within its multicast group membership table. 2732 */ 2733 __le32 num_mcast_groups; 2734 2735 /* Size to alloc for the mcast membership table. 2736 * This num_mcast_table_elems configuration parameter tells the target 2737 * how many peer elements it needs to provide storage for in its 2738 * multicast group membership table. These multicast group membership 2739 * table elements are shared by the multicast groups stored within 2740 * the table. 2741 */ 2742 __le32 num_mcast_table_elems; 2743 2744 /* Whether/how to do multicast->unicast conversion. 2745 * This configuration parameter specifies whether the target should 2746 * perform multicast --> unicast conversion on transmit, and if so, 2747 * what to do if it finds no entries in its multicast group membership 2748 * table for the multicast IP address in the tx frame. 2749 * Configuration value: 2750 * 0 -> Do not perform multicast to unicast conversion. 2751 * 1 -> Convert multicast frames to unicast, if the IP multicast address 2752 * from the tx frame is found in the multicast group membership 2753 * table. If the IP multicast address is not found, drop the frame 2754 * 2 -> Convert multicast frames to unicast, if the IP multicast address 2755 * from the tx frame is found in the multicast group membership 2756 * table. If the IP multicast address is not found, transmit the 2757 * frame as multicast. 2758 */ 2759 __le32 mcast2ucast_mode; 2760 2761 /* How much memory to allocate for a tx PPDU dbg log. 2762 * This parameter controls how much memory the target will allocate to 2763 * store a log of tx PPDU meta-information (how large the PPDU was, 2764 * when it was sent, whether it was successful, etc.) 2765 */ 2766 __le32 tx_dbg_log_size; 2767 2768 /* How many AST entries to be allocated for WDS */ 2769 __le32 num_wds_entries; 2770 2771 /* MAC DMA burst size. 0 -default, 1 -256B */ 2772 __le32 dma_burst_size; 2773 2774 /* Fixed delimiters to be inserted after every MPDU to account for 2775 * interface latency to avoid underrun. 2776 */ 2777 __le32 mac_aggr_delim; 2778 2779 /* Determine whether target is responsible for detecting duplicate 2780 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering 2781 * is always performed on the target. 2782 * 2783 * 0: target responsible for frag timeout and dup checking 2784 * 1: host responsible for frag timeout and dup checking 2785 */ 2786 __le32 rx_skip_defrag_timeout_dup_detection_check; 2787 2788 /* Configuration for VoW : No of Video nodes to be supported and max 2789 * no of descriptors for each video link (node). 2790 */ 2791 __le32 vow_config; 2792 2793 /* Maximum vdev that could use gtk offload */ 2794 __le32 gtk_offload_max_vdev; 2795 2796 /* Number of msdu descriptors target should use */ 2797 __le32 num_msdu_desc; 2798 2799 /* Max number of tx fragments per MSDU. 2800 * This parameter controls the max number of tx fragments per MSDU. 2801 * This will passed by target as part of the WMI_SERVICE_READY event 2802 * and is overridden by the OS shim as required. 2803 */ 2804 __le32 max_frag_entries; 2805 2806 /* Max number of extended peer stats. 2807 * This parameter controls the max number of peers for which extended 2808 * statistics are supported by target 2809 */ 2810 __le32 max_peer_ext_stats; 2811 2812 /* Smart antenna capabilities information. 2813 * 1 - Smart antenna is enabled 2814 * 0 - Smart antenna is disabled 2815 * In future this can contain smart antenna specific capabilities. 2816 */ 2817 __le32 smart_ant_cap; 2818 2819 /* User can configure the buffers allocated for each AC (BE, BK, VI, VO) 2820 * during init. 2821 */ 2822 __le32 bk_minfree; 2823 __le32 be_minfree; 2824 __le32 vi_minfree; 2825 __le32 vo_minfree; 2826 2827 /* Rx batch mode capability. 2828 * 1 - Rx batch mode enabled 2829 * 0 - Rx batch mode disabled 2830 */ 2831 __le32 rx_batchmode; 2832 2833 /* Thermal throttling capability. 2834 * 1 - Capable of thermal throttling 2835 * 0 - Not capable of thermal throttling 2836 */ 2837 __le32 tt_support; 2838 2839 /* ATF configuration. 2840 * 1 - Enable ATF 2841 * 0 - Disable ATF 2842 */ 2843 __le32 atf_config; 2844 2845 /* Configure padding to manage IP header un-alignment 2846 * 1 - Enable padding 2847 * 0 - Disable padding 2848 */ 2849 __le32 iphdr_pad_config; 2850 2851 /* qwrap configuration (bits 15-0) 2852 * 1 - This is qwrap configuration 2853 * 0 - This is not qwrap 2854 * 2855 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables) 2856 * In order to get ack-RSSI reporting and to specify the tx-rate for 2857 * individual frames, this option must be enabled. This uses an extra 2858 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it. 2859 */ 2860 __le32 qwrap_config; 2861 } __packed; 2862 2863 enum wmi_coex_version { 2864 WMI_NO_COEX_VERSION_SUPPORT = 0, 2865 /* 3 wire coex support*/ 2866 WMI_COEX_VERSION_1 = 1, 2867 /* 2.5 wire coex support*/ 2868 WMI_COEX_VERSION_2 = 2, 2869 /* 2.5 wire coex with duty cycle support */ 2870 WMI_COEX_VERSION_3 = 3, 2871 /* 4 wire coex support*/ 2872 WMI_COEX_VERSION_4 = 4, 2873 }; 2874 2875 /** 2876 * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags 2877 * @WMI_10_4_LTEU_SUPPORT: LTEU config 2878 * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config 2879 * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan 2880 * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan 2881 * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats 2882 * @WMI_10_4_PEER_STATS: Per station stats 2883 * @WMI_10_4_VDEV_STATS: Per vdev stats 2884 * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable 2885 * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable 2886 * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable 2887 * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable 2888 * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host 2889 * enable/disable 2890 * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY:Explicit TDLS mode enable/disable 2891 */ 2892 enum wmi_10_4_feature_mask { 2893 WMI_10_4_LTEU_SUPPORT = BIT(0), 2894 WMI_10_4_COEX_GPIO_SUPPORT = BIT(1), 2895 WMI_10_4_AUX_RADIO_SPECTRAL_INTF = BIT(2), 2896 WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF = BIT(3), 2897 WMI_10_4_BSS_CHANNEL_INFO_64 = BIT(4), 2898 WMI_10_4_PEER_STATS = BIT(5), 2899 WMI_10_4_VDEV_STATS = BIT(6), 2900 WMI_10_4_TDLS = BIT(7), 2901 WMI_10_4_TDLS_OFFCHAN = BIT(8), 2902 WMI_10_4_TDLS_UAPSD_BUFFER_STA = BIT(9), 2903 WMI_10_4_TDLS_UAPSD_SLEEP_STA = BIT(10), 2904 WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11), 2905 WMI_10_4_TDLS_EXPLICIT_MODE_ONLY = BIT(12), 2906 2907 }; 2908 2909 struct wmi_ext_resource_config_10_4_cmd { 2910 /* contains enum wmi_host_platform_type */ 2911 __le32 host_platform_config; 2912 /* see enum wmi_10_4_feature_mask */ 2913 __le32 fw_feature_bitmap; 2914 /* WLAN priority GPIO number */ 2915 __le32 wlan_gpio_priority; 2916 /* see enum wmi_coex_version */ 2917 __le32 coex_version; 2918 /* COEX GPIO config */ 2919 __le32 coex_gpio_pin1; 2920 __le32 coex_gpio_pin2; 2921 __le32 coex_gpio_pin3; 2922 /* number of vdevs allowed to perform tdls */ 2923 __le32 num_tdls_vdevs; 2924 /* number of peers to track per TDLS vdev */ 2925 __le32 num_tdls_conn_table_entries; 2926 /* number of tdls sleep sta supported */ 2927 __le32 max_tdls_concurrent_sleep_sta; 2928 /* number of tdls buffer sta supported */ 2929 __le32 max_tdls_concurrent_buffer_sta; 2930 }; 2931 2932 /* structure describing host memory chunk. */ 2933 struct host_memory_chunk { 2934 /* id of the request that is passed up in service ready */ 2935 __le32 req_id; 2936 /* the physical address the memory chunk */ 2937 __le32 ptr; 2938 /* size of the chunk */ 2939 __le32 size; 2940 } __packed; 2941 2942 struct wmi_host_mem_chunks { 2943 __le32 count; 2944 /* some fw revisions require at least 1 chunk regardless of count */ 2945 struct host_memory_chunk items[1]; 2946 } __packed; 2947 2948 struct wmi_init_cmd { 2949 struct wmi_resource_config resource_config; 2950 struct wmi_host_mem_chunks mem_chunks; 2951 } __packed; 2952 2953 /* _10x structure is from 10.X FW API */ 2954 struct wmi_init_cmd_10x { 2955 struct wmi_resource_config_10x resource_config; 2956 struct wmi_host_mem_chunks mem_chunks; 2957 } __packed; 2958 2959 struct wmi_init_cmd_10_2 { 2960 struct wmi_resource_config_10_2 resource_config; 2961 struct wmi_host_mem_chunks mem_chunks; 2962 } __packed; 2963 2964 struct wmi_init_cmd_10_4 { 2965 struct wmi_resource_config_10_4 resource_config; 2966 struct wmi_host_mem_chunks mem_chunks; 2967 } __packed; 2968 2969 struct wmi_chan_list_entry { 2970 __le16 freq; 2971 u8 phy_mode; /* valid for 10.2 only */ 2972 u8 reserved; 2973 } __packed; 2974 2975 /* TLV for channel list */ 2976 struct wmi_chan_list { 2977 __le32 tag; /* WMI_CHAN_LIST_TAG */ 2978 __le32 num_chan; 2979 struct wmi_chan_list_entry channel_list[0]; 2980 } __packed; 2981 2982 struct wmi_bssid_list { 2983 __le32 tag; /* WMI_BSSID_LIST_TAG */ 2984 __le32 num_bssid; 2985 struct wmi_mac_addr bssid_list[0]; 2986 } __packed; 2987 2988 struct wmi_ie_data { 2989 __le32 tag; /* WMI_IE_TAG */ 2990 __le32 ie_len; 2991 u8 ie_data[0]; 2992 } __packed; 2993 2994 struct wmi_ssid { 2995 __le32 ssid_len; 2996 u8 ssid[32]; 2997 } __packed; 2998 2999 struct wmi_ssid_list { 3000 __le32 tag; /* WMI_SSID_LIST_TAG */ 3001 __le32 num_ssids; 3002 struct wmi_ssid ssids[0]; 3003 } __packed; 3004 3005 /* prefix used by scan requestor ids on the host */ 3006 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000 3007 3008 /* prefix used by scan request ids generated on the host */ 3009 /* host cycles through the lower 12 bits to generate ids */ 3010 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000 3011 3012 #define WLAN_SCAN_PARAMS_MAX_SSID 16 3013 #define WLAN_SCAN_PARAMS_MAX_BSSID 4 3014 #define WLAN_SCAN_PARAMS_MAX_IE_LEN 256 3015 3016 /* Values lower than this may be refused by some firmware revisions with a scan 3017 * completion with a timedout reason. 3018 */ 3019 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40 3020 3021 /* Scan priority numbers must be sequential, starting with 0 */ 3022 enum wmi_scan_priority { 3023 WMI_SCAN_PRIORITY_VERY_LOW = 0, 3024 WMI_SCAN_PRIORITY_LOW, 3025 WMI_SCAN_PRIORITY_MEDIUM, 3026 WMI_SCAN_PRIORITY_HIGH, 3027 WMI_SCAN_PRIORITY_VERY_HIGH, 3028 WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */ 3029 }; 3030 3031 struct wmi_start_scan_common { 3032 /* Scan ID */ 3033 __le32 scan_id; 3034 /* Scan requestor ID */ 3035 __le32 scan_req_id; 3036 /* VDEV id(interface) that is requesting scan */ 3037 __le32 vdev_id; 3038 /* Scan Priority, input to scan scheduler */ 3039 __le32 scan_priority; 3040 /* Scan events subscription */ 3041 __le32 notify_scan_events; 3042 /* dwell time in msec on active channels */ 3043 __le32 dwell_time_active; 3044 /* dwell time in msec on passive channels */ 3045 __le32 dwell_time_passive; 3046 /* 3047 * min time in msec on the BSS channel,only valid if atleast one 3048 * VDEV is active 3049 */ 3050 __le32 min_rest_time; 3051 /* 3052 * max rest time in msec on the BSS channel,only valid if at least 3053 * one VDEV is active 3054 */ 3055 /* 3056 * the scanner will rest on the bss channel at least min_rest_time 3057 * after min_rest_time the scanner will start checking for tx/rx 3058 * activity on all VDEVs. if there is no activity the scanner will 3059 * switch to off channel. if there is activity the scanner will let 3060 * the radio on the bss channel until max_rest_time expires.at 3061 * max_rest_time scanner will switch to off channel irrespective of 3062 * activity. activity is determined by the idle_time parameter. 3063 */ 3064 __le32 max_rest_time; 3065 /* 3066 * time before sending next set of probe requests. 3067 * The scanner keeps repeating probe requests transmission with 3068 * period specified by repeat_probe_time. 3069 * The number of probe requests specified depends on the ssid_list 3070 * and bssid_list 3071 */ 3072 __le32 repeat_probe_time; 3073 /* time in msec between 2 consequetive probe requests with in a set. */ 3074 __le32 probe_spacing_time; 3075 /* 3076 * data inactivity time in msec on bss channel that will be used by 3077 * scanner for measuring the inactivity. 3078 */ 3079 __le32 idle_time; 3080 /* maximum time in msec allowed for scan */ 3081 __le32 max_scan_time; 3082 /* 3083 * delay in msec before sending first probe request after switching 3084 * to a channel 3085 */ 3086 __le32 probe_delay; 3087 /* Scan control flags */ 3088 __le32 scan_ctrl_flags; 3089 } __packed; 3090 3091 struct wmi_start_scan_tlvs { 3092 /* TLV parameters. These includes channel list, ssid list, bssid list, 3093 * extra ies. 3094 */ 3095 u8 tlvs[0]; 3096 } __packed; 3097 3098 struct wmi_start_scan_cmd { 3099 struct wmi_start_scan_common common; 3100 __le32 burst_duration_ms; 3101 struct wmi_start_scan_tlvs tlvs; 3102 } __packed; 3103 3104 /* This is the definition from 10.X firmware branch */ 3105 struct wmi_10x_start_scan_cmd { 3106 struct wmi_start_scan_common common; 3107 struct wmi_start_scan_tlvs tlvs; 3108 } __packed; 3109 3110 struct wmi_ssid_arg { 3111 int len; 3112 const u8 *ssid; 3113 }; 3114 3115 struct wmi_bssid_arg { 3116 const u8 *bssid; 3117 }; 3118 3119 struct wmi_start_scan_arg { 3120 u32 scan_id; 3121 u32 scan_req_id; 3122 u32 vdev_id; 3123 u32 scan_priority; 3124 u32 notify_scan_events; 3125 u32 dwell_time_active; 3126 u32 dwell_time_passive; 3127 u32 min_rest_time; 3128 u32 max_rest_time; 3129 u32 repeat_probe_time; 3130 u32 probe_spacing_time; 3131 u32 idle_time; 3132 u32 max_scan_time; 3133 u32 probe_delay; 3134 u32 scan_ctrl_flags; 3135 u32 burst_duration_ms; 3136 3137 u32 ie_len; 3138 u32 n_channels; 3139 u32 n_ssids; 3140 u32 n_bssids; 3141 3142 u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN]; 3143 u16 channels[64]; 3144 struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID]; 3145 struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID]; 3146 }; 3147 3148 /* scan control flags */ 3149 3150 /* passively scan all channels including active channels */ 3151 #define WMI_SCAN_FLAG_PASSIVE 0x1 3152 /* add wild card ssid probe request even though ssid_list is specified. */ 3153 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2 3154 /* add cck rates to rates/xrate ie for the generated probe request */ 3155 #define WMI_SCAN_ADD_CCK_RATES 0x4 3156 /* add ofdm rates to rates/xrate ie for the generated probe request */ 3157 #define WMI_SCAN_ADD_OFDM_RATES 0x8 3158 /* To enable indication of Chan load and Noise floor to host */ 3159 #define WMI_SCAN_CHAN_STAT_EVENT 0x10 3160 /* Filter Probe request frames */ 3161 #define WMI_SCAN_FILTER_PROBE_REQ 0x20 3162 /* When set, DFS channels will not be scanned */ 3163 #define WMI_SCAN_BYPASS_DFS_CHN 0x40 3164 /* Different FW scan engine may choose to bail out on errors. 3165 * Allow the driver to have influence over that. 3166 */ 3167 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80 3168 3169 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */ 3170 #define WMI_SCAN_CLASS_MASK 0xFF000000 3171 3172 enum wmi_stop_scan_type { 3173 WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */ 3174 WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */ 3175 WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */ 3176 }; 3177 3178 struct wmi_stop_scan_cmd { 3179 __le32 scan_req_id; 3180 __le32 scan_id; 3181 __le32 req_type; 3182 __le32 vdev_id; 3183 } __packed; 3184 3185 struct wmi_stop_scan_arg { 3186 u32 req_id; 3187 enum wmi_stop_scan_type req_type; 3188 union { 3189 u32 scan_id; 3190 u32 vdev_id; 3191 } u; 3192 }; 3193 3194 struct wmi_scan_chan_list_cmd { 3195 __le32 num_scan_chans; 3196 struct wmi_channel chan_info[0]; 3197 } __packed; 3198 3199 struct wmi_scan_chan_list_arg { 3200 u32 n_channels; 3201 struct wmi_channel_arg *channels; 3202 }; 3203 3204 enum wmi_bss_filter { 3205 WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */ 3206 WMI_BSS_FILTER_ALL, /* all beacons forwarded */ 3207 WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */ 3208 WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */ 3209 WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */ 3210 WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */ 3211 WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */ 3212 WMI_BSS_FILTER_LAST_BSS, /* marker only */ 3213 }; 3214 3215 enum wmi_scan_event_type { 3216 WMI_SCAN_EVENT_STARTED = BIT(0), 3217 WMI_SCAN_EVENT_COMPLETED = BIT(1), 3218 WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2), 3219 WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3), 3220 WMI_SCAN_EVENT_DEQUEUED = BIT(4), 3221 /* possibly by high-prio scan */ 3222 WMI_SCAN_EVENT_PREEMPTED = BIT(5), 3223 WMI_SCAN_EVENT_START_FAILED = BIT(6), 3224 WMI_SCAN_EVENT_RESTARTED = BIT(7), 3225 WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8), 3226 WMI_SCAN_EVENT_MAX = BIT(15), 3227 }; 3228 3229 enum wmi_scan_completion_reason { 3230 WMI_SCAN_REASON_COMPLETED, 3231 WMI_SCAN_REASON_CANCELLED, 3232 WMI_SCAN_REASON_PREEMPTED, 3233 WMI_SCAN_REASON_TIMEDOUT, 3234 WMI_SCAN_REASON_INTERNAL_FAILURE, 3235 WMI_SCAN_REASON_MAX, 3236 }; 3237 3238 struct wmi_scan_event { 3239 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 3240 __le32 reason; /* %WMI_SCAN_REASON_ */ 3241 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 3242 __le32 scan_req_id; 3243 __le32 scan_id; 3244 __le32 vdev_id; 3245 } __packed; 3246 3247 /* 3248 * This defines how much headroom is kept in the 3249 * receive frame between the descriptor and the 3250 * payload, in order for the WMI PHY error and 3251 * management handler to insert header contents. 3252 * 3253 * This is in bytes. 3254 */ 3255 #define WMI_MGMT_RX_HDR_HEADROOM 52 3256 3257 /* 3258 * This event will be used for sending scan results 3259 * as well as rx mgmt frames to the host. The rx buffer 3260 * will be sent as part of this WMI event. It would be a 3261 * good idea to pass all the fields in the RX status 3262 * descriptor up to the host. 3263 */ 3264 struct wmi_mgmt_rx_hdr_v1 { 3265 __le32 channel; 3266 __le32 snr; 3267 __le32 rate; 3268 __le32 phy_mode; 3269 __le32 buf_len; 3270 __le32 status; /* %WMI_RX_STATUS_ */ 3271 } __packed; 3272 3273 struct wmi_mgmt_rx_hdr_v2 { 3274 struct wmi_mgmt_rx_hdr_v1 v1; 3275 __le32 rssi_ctl[4]; 3276 } __packed; 3277 3278 struct wmi_mgmt_rx_event_v1 { 3279 struct wmi_mgmt_rx_hdr_v1 hdr; 3280 u8 buf[0]; 3281 } __packed; 3282 3283 struct wmi_mgmt_rx_event_v2 { 3284 struct wmi_mgmt_rx_hdr_v2 hdr; 3285 u8 buf[0]; 3286 } __packed; 3287 3288 struct wmi_10_4_mgmt_rx_hdr { 3289 __le32 channel; 3290 __le32 snr; 3291 u8 rssi_ctl[4]; 3292 __le32 rate; 3293 __le32 phy_mode; 3294 __le32 buf_len; 3295 __le32 status; 3296 } __packed; 3297 3298 struct wmi_10_4_mgmt_rx_event { 3299 struct wmi_10_4_mgmt_rx_hdr hdr; 3300 u8 buf[0]; 3301 } __packed; 3302 3303 struct wmi_mgmt_rx_ext_info { 3304 __le64 rx_mac_timestamp; 3305 } __packed __aligned(4); 3306 3307 #define WMI_RX_STATUS_OK 0x00 3308 #define WMI_RX_STATUS_ERR_CRC 0x01 3309 #define WMI_RX_STATUS_ERR_DECRYPT 0x08 3310 #define WMI_RX_STATUS_ERR_MIC 0x10 3311 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20 3312 /* Extension data at the end of mgmt frame */ 3313 #define WMI_RX_STATUS_EXT_INFO 0x40 3314 3315 #define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26 3316 #define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24 3317 #define PHY_ERROR_GEN_RADAR 0x05 3318 3319 #define PHY_ERROR_10_4_RADAR_MASK 0x4 3320 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000 3321 3322 enum phy_err_type { 3323 PHY_ERROR_UNKNOWN, 3324 PHY_ERROR_SPECTRAL_SCAN, 3325 PHY_ERROR_FALSE_RADAR_EXT, 3326 PHY_ERROR_RADAR 3327 }; 3328 3329 struct wmi_phyerr { 3330 __le32 tsf_timestamp; 3331 __le16 freq1; 3332 __le16 freq2; 3333 u8 rssi_combined; 3334 u8 chan_width_mhz; 3335 u8 phy_err_code; 3336 u8 rsvd0; 3337 __le32 rssi_chains[4]; 3338 __le16 nf_chains[4]; 3339 __le32 buf_len; 3340 u8 buf[0]; 3341 } __packed; 3342 3343 struct wmi_phyerr_event { 3344 __le32 num_phyerrs; 3345 __le32 tsf_l32; 3346 __le32 tsf_u32; 3347 struct wmi_phyerr phyerrs[0]; 3348 } __packed; 3349 3350 struct wmi_10_4_phyerr_event { 3351 __le32 tsf_l32; 3352 __le32 tsf_u32; 3353 __le16 freq1; 3354 __le16 freq2; 3355 u8 rssi_combined; 3356 u8 chan_width_mhz; 3357 u8 phy_err_code; 3358 u8 rsvd0; 3359 __le32 rssi_chains[4]; 3360 __le16 nf_chains[4]; 3361 __le32 phy_err_mask[2]; 3362 __le32 tsf_timestamp; 3363 __le32 buf_len; 3364 u8 buf[0]; 3365 } __packed; 3366 3367 #define PHYERR_TLV_SIG 0xBB 3368 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB 3369 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8 3370 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9 3371 3372 struct phyerr_radar_report { 3373 __le32 reg0; /* RADAR_REPORT_REG0_* */ 3374 __le32 reg1; /* RADAR_REPORT_REG1_* */ 3375 } __packed; 3376 3377 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000 3378 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31 3379 3380 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000 3381 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30 3382 3383 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000 3384 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20 3385 3386 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000 3387 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16 3388 3389 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00 3390 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10 3391 3392 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF 3393 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0 3394 3395 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000 3396 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31 3397 3398 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000 3399 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24 3400 3401 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000 3402 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16 3403 3404 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00 3405 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8 3406 3407 #define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF 3408 #define RADAR_REPORT_REG1_PULSE_DUR_LSB 0 3409 3410 struct phyerr_fft_report { 3411 __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */ 3412 __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */ 3413 } __packed; 3414 3415 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000 3416 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23 3417 3418 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000 3419 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14 3420 3421 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000 3422 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12 3423 3424 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF 3425 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0 3426 3427 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000 3428 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26 3429 3430 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000 3431 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18 3432 3433 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00 3434 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8 3435 3436 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF 3437 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0 3438 3439 struct phyerr_tlv { 3440 __le16 len; 3441 u8 tag; 3442 u8 sig; 3443 } __packed; 3444 3445 #define DFS_RSSI_POSSIBLY_FALSE 50 3446 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40 3447 3448 struct wmi_mgmt_tx_hdr { 3449 __le32 vdev_id; 3450 struct wmi_mac_addr peer_macaddr; 3451 __le32 tx_rate; 3452 __le32 tx_power; 3453 __le32 buf_len; 3454 } __packed; 3455 3456 struct wmi_mgmt_tx_cmd { 3457 struct wmi_mgmt_tx_hdr hdr; 3458 u8 buf[0]; 3459 } __packed; 3460 3461 struct wmi_echo_event { 3462 __le32 value; 3463 } __packed; 3464 3465 struct wmi_echo_cmd { 3466 __le32 value; 3467 } __packed; 3468 3469 struct wmi_pdev_set_regdomain_cmd { 3470 __le32 reg_domain; 3471 __le32 reg_domain_2G; 3472 __le32 reg_domain_5G; 3473 __le32 conformance_test_limit_2G; 3474 __le32 conformance_test_limit_5G; 3475 } __packed; 3476 3477 enum wmi_dfs_region { 3478 /* Uninitialized dfs domain */ 3479 WMI_UNINIT_DFS_DOMAIN = 0, 3480 3481 /* FCC3 dfs domain */ 3482 WMI_FCC_DFS_DOMAIN = 1, 3483 3484 /* ETSI dfs domain */ 3485 WMI_ETSI_DFS_DOMAIN = 2, 3486 3487 /*Japan dfs domain */ 3488 WMI_MKK4_DFS_DOMAIN = 3, 3489 }; 3490 3491 struct wmi_pdev_set_regdomain_cmd_10x { 3492 __le32 reg_domain; 3493 __le32 reg_domain_2G; 3494 __le32 reg_domain_5G; 3495 __le32 conformance_test_limit_2G; 3496 __le32 conformance_test_limit_5G; 3497 3498 /* dfs domain from wmi_dfs_region */ 3499 __le32 dfs_domain; 3500 } __packed; 3501 3502 /* Command to set/unset chip in quiet mode */ 3503 struct wmi_pdev_set_quiet_cmd { 3504 /* period in TUs */ 3505 __le32 period; 3506 3507 /* duration in TUs */ 3508 __le32 duration; 3509 3510 /* offset in TUs */ 3511 __le32 next_start; 3512 3513 /* enable/disable */ 3514 __le32 enabled; 3515 } __packed; 3516 3517 /* 3518 * 802.11g protection mode. 3519 */ 3520 enum ath10k_protmode { 3521 ATH10K_PROT_NONE = 0, /* no protection */ 3522 ATH10K_PROT_CTSONLY = 1, /* CTS to self */ 3523 ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */ 3524 }; 3525 3526 enum wmi_rtscts_profile { 3527 WMI_RTSCTS_FOR_NO_RATESERIES = 0, 3528 WMI_RTSCTS_FOR_SECOND_RATESERIES, 3529 WMI_RTSCTS_ACROSS_SW_RETRIES 3530 }; 3531 3532 #define WMI_RTSCTS_ENABLED 1 3533 #define WMI_RTSCTS_SET_MASK 0x0f 3534 #define WMI_RTSCTS_SET_LSB 0 3535 3536 #define WMI_RTSCTS_PROFILE_MASK 0xf0 3537 #define WMI_RTSCTS_PROFILE_LSB 4 3538 3539 enum wmi_beacon_gen_mode { 3540 WMI_BEACON_STAGGERED_MODE = 0, 3541 WMI_BEACON_BURST_MODE = 1 3542 }; 3543 3544 enum wmi_csa_event_ies_present_flag { 3545 WMI_CSA_IE_PRESENT = 0x00000001, 3546 WMI_XCSA_IE_PRESENT = 0x00000002, 3547 WMI_WBW_IE_PRESENT = 0x00000004, 3548 WMI_CSWARP_IE_PRESENT = 0x00000008, 3549 }; 3550 3551 /* wmi CSA receive event from beacon frame */ 3552 struct wmi_csa_event { 3553 __le32 i_fc_dur; 3554 /* Bit 0-15: FC */ 3555 /* Bit 16-31: DUR */ 3556 struct wmi_mac_addr i_addr1; 3557 struct wmi_mac_addr i_addr2; 3558 __le32 csa_ie[2]; 3559 __le32 xcsa_ie[2]; 3560 __le32 wb_ie[2]; 3561 __le32 cswarp_ie; 3562 __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */ 3563 } __packed; 3564 3565 /* the definition of different PDEV parameters */ 3566 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3567 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3568 #define PEER_DEFAULT_STATS_UPDATE_PERIOD 500 3569 3570 struct wmi_pdev_param_map { 3571 u32 tx_chain_mask; 3572 u32 rx_chain_mask; 3573 u32 txpower_limit2g; 3574 u32 txpower_limit5g; 3575 u32 txpower_scale; 3576 u32 beacon_gen_mode; 3577 u32 beacon_tx_mode; 3578 u32 resmgr_offchan_mode; 3579 u32 protection_mode; 3580 u32 dynamic_bw; 3581 u32 non_agg_sw_retry_th; 3582 u32 agg_sw_retry_th; 3583 u32 sta_kickout_th; 3584 u32 ac_aggrsize_scaling; 3585 u32 ltr_enable; 3586 u32 ltr_ac_latency_be; 3587 u32 ltr_ac_latency_bk; 3588 u32 ltr_ac_latency_vi; 3589 u32 ltr_ac_latency_vo; 3590 u32 ltr_ac_latency_timeout; 3591 u32 ltr_sleep_override; 3592 u32 ltr_rx_override; 3593 u32 ltr_tx_activity_timeout; 3594 u32 l1ss_enable; 3595 u32 dsleep_enable; 3596 u32 pcielp_txbuf_flush; 3597 u32 pcielp_txbuf_watermark; 3598 u32 pcielp_txbuf_tmo_en; 3599 u32 pcielp_txbuf_tmo_value; 3600 u32 pdev_stats_update_period; 3601 u32 vdev_stats_update_period; 3602 u32 peer_stats_update_period; 3603 u32 bcnflt_stats_update_period; 3604 u32 pmf_qos; 3605 u32 arp_ac_override; 3606 u32 dcs; 3607 u32 ani_enable; 3608 u32 ani_poll_period; 3609 u32 ani_listen_period; 3610 u32 ani_ofdm_level; 3611 u32 ani_cck_level; 3612 u32 dyntxchain; 3613 u32 proxy_sta; 3614 u32 idle_ps_config; 3615 u32 power_gating_sleep; 3616 u32 fast_channel_reset; 3617 u32 burst_dur; 3618 u32 burst_enable; 3619 u32 cal_period; 3620 u32 aggr_burst; 3621 u32 rx_decap_mode; 3622 u32 smart_antenna_default_antenna; 3623 u32 igmpmld_override; 3624 u32 igmpmld_tid; 3625 u32 antenna_gain; 3626 u32 rx_filter; 3627 u32 set_mcast_to_ucast_tid; 3628 u32 proxy_sta_mode; 3629 u32 set_mcast2ucast_mode; 3630 u32 set_mcast2ucast_buffer; 3631 u32 remove_mcast2ucast_buffer; 3632 u32 peer_sta_ps_statechg_enable; 3633 u32 igmpmld_ac_override; 3634 u32 block_interbss; 3635 u32 set_disable_reset_cmdid; 3636 u32 set_msdu_ttl_cmdid; 3637 u32 set_ppdu_duration_cmdid; 3638 u32 txbf_sound_period_cmdid; 3639 u32 set_promisc_mode_cmdid; 3640 u32 set_burst_mode_cmdid; 3641 u32 en_stats; 3642 u32 mu_group_policy; 3643 u32 noise_detection; 3644 u32 noise_threshold; 3645 u32 dpd_enable; 3646 u32 set_mcast_bcast_echo; 3647 u32 atf_strict_sch; 3648 u32 atf_sched_duration; 3649 u32 ant_plzn; 3650 u32 mgmt_retry_limit; 3651 u32 sensitivity_level; 3652 u32 signed_txpower_2g; 3653 u32 signed_txpower_5g; 3654 u32 enable_per_tid_amsdu; 3655 u32 enable_per_tid_ampdu; 3656 u32 cca_threshold; 3657 u32 rts_fixed_rate; 3658 u32 pdev_reset; 3659 u32 wapi_mbssid_offset; 3660 u32 arp_srcaddr; 3661 u32 arp_dstaddr; 3662 u32 enable_btcoex; 3663 }; 3664 3665 #define WMI_PDEV_PARAM_UNSUPPORTED 0 3666 3667 enum wmi_pdev_param { 3668 /* TX chain mask */ 3669 WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3670 /* RX chain mask */ 3671 WMI_PDEV_PARAM_RX_CHAIN_MASK, 3672 /* TX power limit for 2G Radio */ 3673 WMI_PDEV_PARAM_TXPOWER_LIMIT2G, 3674 /* TX power limit for 5G Radio */ 3675 WMI_PDEV_PARAM_TXPOWER_LIMIT5G, 3676 /* TX power scale */ 3677 WMI_PDEV_PARAM_TXPOWER_SCALE, 3678 /* Beacon generation mode . 0: host, 1: target */ 3679 WMI_PDEV_PARAM_BEACON_GEN_MODE, 3680 /* Beacon generation mode . 0: staggered 1: bursted */ 3681 WMI_PDEV_PARAM_BEACON_TX_MODE, 3682 /* 3683 * Resource manager off chan mode . 3684 * 0: turn off off chan mode. 1: turn on offchan mode 3685 */ 3686 WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3687 /* 3688 * Protection mode: 3689 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3690 */ 3691 WMI_PDEV_PARAM_PROTECTION_MODE, 3692 /* 3693 * Dynamic bandwidth - 0: disable, 1: enable 3694 * 3695 * When enabled HW rate control tries different bandwidths when 3696 * retransmitting frames. 3697 */ 3698 WMI_PDEV_PARAM_DYNAMIC_BW, 3699 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3700 WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3701 /* aggregrate sw retry threshold. 0-disable*/ 3702 WMI_PDEV_PARAM_AGG_SW_RETRY_TH, 3703 /* Station kickout threshold (non of consecutive failures).0-disable */ 3704 WMI_PDEV_PARAM_STA_KICKOUT_TH, 3705 /* Aggerate size scaling configuration per AC */ 3706 WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3707 /* LTR enable */ 3708 WMI_PDEV_PARAM_LTR_ENABLE, 3709 /* LTR latency for BE, in us */ 3710 WMI_PDEV_PARAM_LTR_AC_LATENCY_BE, 3711 /* LTR latency for BK, in us */ 3712 WMI_PDEV_PARAM_LTR_AC_LATENCY_BK, 3713 /* LTR latency for VI, in us */ 3714 WMI_PDEV_PARAM_LTR_AC_LATENCY_VI, 3715 /* LTR latency for VO, in us */ 3716 WMI_PDEV_PARAM_LTR_AC_LATENCY_VO, 3717 /* LTR AC latency timeout, in ms */ 3718 WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3719 /* LTR platform latency override, in us */ 3720 WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3721 /* LTR-RX override, in us */ 3722 WMI_PDEV_PARAM_LTR_RX_OVERRIDE, 3723 /* Tx activity timeout for LTR, in us */ 3724 WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3725 /* L1SS state machine enable */ 3726 WMI_PDEV_PARAM_L1SS_ENABLE, 3727 /* Deep sleep state machine enable */ 3728 WMI_PDEV_PARAM_DSLEEP_ENABLE, 3729 /* RX buffering flush enable */ 3730 WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3731 /* RX buffering matermark */ 3732 WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3733 /* RX buffering timeout enable */ 3734 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3735 /* RX buffering timeout value */ 3736 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3737 /* pdev level stats update period in ms */ 3738 WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3739 /* vdev level stats update period in ms */ 3740 WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3741 /* peer level stats update period in ms */ 3742 WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3743 /* beacon filter status update period */ 3744 WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3745 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3746 WMI_PDEV_PARAM_PMF_QOS, 3747 /* Access category on which ARP frames are sent */ 3748 WMI_PDEV_PARAM_ARP_AC_OVERRIDE, 3749 /* DCS configuration */ 3750 WMI_PDEV_PARAM_DCS, 3751 /* Enable/Disable ANI on target */ 3752 WMI_PDEV_PARAM_ANI_ENABLE, 3753 /* configure the ANI polling period */ 3754 WMI_PDEV_PARAM_ANI_POLL_PERIOD, 3755 /* configure the ANI listening period */ 3756 WMI_PDEV_PARAM_ANI_LISTEN_PERIOD, 3757 /* configure OFDM immunity level */ 3758 WMI_PDEV_PARAM_ANI_OFDM_LEVEL, 3759 /* configure CCK immunity level */ 3760 WMI_PDEV_PARAM_ANI_CCK_LEVEL, 3761 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3762 WMI_PDEV_PARAM_DYNTXCHAIN, 3763 /* Enable/Disable proxy STA */ 3764 WMI_PDEV_PARAM_PROXY_STA, 3765 /* Enable/Disable low power state when all VDEVs are inactive/idle. */ 3766 WMI_PDEV_PARAM_IDLE_PS_CONFIG, 3767 /* Enable/Disable power gating sleep */ 3768 WMI_PDEV_PARAM_POWER_GATING_SLEEP, 3769 }; 3770 3771 enum wmi_10x_pdev_param { 3772 /* TX chian mask */ 3773 WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3774 /* RX chian mask */ 3775 WMI_10X_PDEV_PARAM_RX_CHAIN_MASK, 3776 /* TX power limit for 2G Radio */ 3777 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G, 3778 /* TX power limit for 5G Radio */ 3779 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G, 3780 /* TX power scale */ 3781 WMI_10X_PDEV_PARAM_TXPOWER_SCALE, 3782 /* Beacon generation mode . 0: host, 1: target */ 3783 WMI_10X_PDEV_PARAM_BEACON_GEN_MODE, 3784 /* Beacon generation mode . 0: staggered 1: bursted */ 3785 WMI_10X_PDEV_PARAM_BEACON_TX_MODE, 3786 /* 3787 * Resource manager off chan mode . 3788 * 0: turn off off chan mode. 1: turn on offchan mode 3789 */ 3790 WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3791 /* 3792 * Protection mode: 3793 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3794 */ 3795 WMI_10X_PDEV_PARAM_PROTECTION_MODE, 3796 /* Dynamic bandwidth 0: disable 1: enable */ 3797 WMI_10X_PDEV_PARAM_DYNAMIC_BW, 3798 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3799 WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3800 /* aggregrate sw retry threshold. 0-disable*/ 3801 WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH, 3802 /* Station kickout threshold (non of consecutive failures).0-disable */ 3803 WMI_10X_PDEV_PARAM_STA_KICKOUT_TH, 3804 /* Aggerate size scaling configuration per AC */ 3805 WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3806 /* LTR enable */ 3807 WMI_10X_PDEV_PARAM_LTR_ENABLE, 3808 /* LTR latency for BE, in us */ 3809 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE, 3810 /* LTR latency for BK, in us */ 3811 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK, 3812 /* LTR latency for VI, in us */ 3813 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI, 3814 /* LTR latency for VO, in us */ 3815 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO, 3816 /* LTR AC latency timeout, in ms */ 3817 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3818 /* LTR platform latency override, in us */ 3819 WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3820 /* LTR-RX override, in us */ 3821 WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE, 3822 /* Tx activity timeout for LTR, in us */ 3823 WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3824 /* L1SS state machine enable */ 3825 WMI_10X_PDEV_PARAM_L1SS_ENABLE, 3826 /* Deep sleep state machine enable */ 3827 WMI_10X_PDEV_PARAM_DSLEEP_ENABLE, 3828 /* pdev level stats update period in ms */ 3829 WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3830 /* vdev level stats update period in ms */ 3831 WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3832 /* peer level stats update period in ms */ 3833 WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3834 /* beacon filter status update period */ 3835 WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3836 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3837 WMI_10X_PDEV_PARAM_PMF_QOS, 3838 /* Access category on which ARP and DHCP frames are sent */ 3839 WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE, 3840 /* DCS configuration */ 3841 WMI_10X_PDEV_PARAM_DCS, 3842 /* Enable/Disable ANI on target */ 3843 WMI_10X_PDEV_PARAM_ANI_ENABLE, 3844 /* configure the ANI polling period */ 3845 WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD, 3846 /* configure the ANI listening period */ 3847 WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD, 3848 /* configure OFDM immunity level */ 3849 WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL, 3850 /* configure CCK immunity level */ 3851 WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL, 3852 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3853 WMI_10X_PDEV_PARAM_DYNTXCHAIN, 3854 /* Enable/Disable Fast channel reset*/ 3855 WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET, 3856 /* Set Bursting DUR */ 3857 WMI_10X_PDEV_PARAM_BURST_DUR, 3858 /* Set Bursting Enable*/ 3859 WMI_10X_PDEV_PARAM_BURST_ENABLE, 3860 3861 /* following are available as of firmware 10.2 */ 3862 WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 3863 WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE, 3864 WMI_10X_PDEV_PARAM_IGMPMLD_TID, 3865 WMI_10X_PDEV_PARAM_ANTENNA_GAIN, 3866 WMI_10X_PDEV_PARAM_RX_DECAP_MODE, 3867 WMI_10X_PDEV_PARAM_RX_FILTER, 3868 WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID, 3869 WMI_10X_PDEV_PARAM_PROXY_STA_MODE, 3870 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE, 3871 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 3872 WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 3873 WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE, 3874 WMI_10X_PDEV_PARAM_RTS_FIXED_RATE, 3875 WMI_10X_PDEV_PARAM_CAL_PERIOD 3876 }; 3877 3878 enum wmi_10_4_pdev_param { 3879 WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3880 WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK, 3881 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G, 3882 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G, 3883 WMI_10_4_PDEV_PARAM_TXPOWER_SCALE, 3884 WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE, 3885 WMI_10_4_PDEV_PARAM_BEACON_TX_MODE, 3886 WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3887 WMI_10_4_PDEV_PARAM_PROTECTION_MODE, 3888 WMI_10_4_PDEV_PARAM_DYNAMIC_BW, 3889 WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3890 WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH, 3891 WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH, 3892 WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3893 WMI_10_4_PDEV_PARAM_LTR_ENABLE, 3894 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE, 3895 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK, 3896 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI, 3897 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO, 3898 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3899 WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3900 WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE, 3901 WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3902 WMI_10_4_PDEV_PARAM_L1SS_ENABLE, 3903 WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE, 3904 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3905 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3906 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3907 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3908 WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3909 WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3910 WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3911 WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3912 WMI_10_4_PDEV_PARAM_PMF_QOS, 3913 WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE, 3914 WMI_10_4_PDEV_PARAM_DCS, 3915 WMI_10_4_PDEV_PARAM_ANI_ENABLE, 3916 WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD, 3917 WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD, 3918 WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL, 3919 WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL, 3920 WMI_10_4_PDEV_PARAM_DYNTXCHAIN, 3921 WMI_10_4_PDEV_PARAM_PROXY_STA, 3922 WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG, 3923 WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP, 3924 WMI_10_4_PDEV_PARAM_AGGR_BURST, 3925 WMI_10_4_PDEV_PARAM_RX_DECAP_MODE, 3926 WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET, 3927 WMI_10_4_PDEV_PARAM_BURST_DUR, 3928 WMI_10_4_PDEV_PARAM_BURST_ENABLE, 3929 WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 3930 WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE, 3931 WMI_10_4_PDEV_PARAM_IGMPMLD_TID, 3932 WMI_10_4_PDEV_PARAM_ANTENNA_GAIN, 3933 WMI_10_4_PDEV_PARAM_RX_FILTER, 3934 WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID, 3935 WMI_10_4_PDEV_PARAM_PROXY_STA_MODE, 3936 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE, 3937 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 3938 WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 3939 WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE, 3940 WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE, 3941 WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS, 3942 WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID, 3943 WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID, 3944 WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID, 3945 WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID, 3946 WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID, 3947 WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID, 3948 WMI_10_4_PDEV_PARAM_EN_STATS, 3949 WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY, 3950 WMI_10_4_PDEV_PARAM_NOISE_DETECTION, 3951 WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD, 3952 WMI_10_4_PDEV_PARAM_DPD_ENABLE, 3953 WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO, 3954 WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH, 3955 WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION, 3956 WMI_10_4_PDEV_PARAM_ANT_PLZN, 3957 WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT, 3958 WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL, 3959 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G, 3960 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G, 3961 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU, 3962 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU, 3963 WMI_10_4_PDEV_PARAM_CCA_THRESHOLD, 3964 WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE, 3965 WMI_10_4_PDEV_PARAM_CAL_PERIOD, 3966 WMI_10_4_PDEV_PARAM_PDEV_RESET, 3967 WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET, 3968 WMI_10_4_PDEV_PARAM_ARP_SRCADDR, 3969 WMI_10_4_PDEV_PARAM_ARP_DSTADDR, 3970 WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB, 3971 WMI_10_4_PDEV_PARAM_RX_BATCHMODE, 3972 WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY, 3973 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH, 3974 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR, 3975 WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE, 3976 WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE, 3977 WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY, 3978 WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, 3979 }; 3980 3981 struct wmi_pdev_set_param_cmd { 3982 __le32 param_id; 3983 __le32 param_value; 3984 } __packed; 3985 3986 /* valid period is 1 ~ 60000ms, unit in millisecond */ 3987 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000 3988 3989 struct wmi_pdev_get_tpc_config_cmd { 3990 /* parameter */ 3991 __le32 param; 3992 } __packed; 3993 3994 #define WMI_TPC_CONFIG_PARAM 1 3995 #define WMI_TPC_RATE_MAX 160 3996 #define WMI_TPC_TX_N_CHAIN 4 3997 #define WMI_TPC_PREAM_TABLE_MAX 10 3998 #define WMI_TPC_FLAG 3 3999 #define WMI_TPC_BUF_SIZE 10 4000 4001 enum wmi_tpc_table_type { 4002 WMI_TPC_TABLE_TYPE_CDD = 0, 4003 WMI_TPC_TABLE_TYPE_STBC = 1, 4004 WMI_TPC_TABLE_TYPE_TXBF = 2, 4005 }; 4006 4007 enum wmi_tpc_config_event_flag { 4008 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, 4009 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, 4010 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, 4011 }; 4012 4013 struct wmi_pdev_tpc_config_event { 4014 __le32 reg_domain; 4015 __le32 chan_freq; 4016 __le32 phy_mode; 4017 __le32 twice_antenna_reduction; 4018 __le32 twice_max_rd_power; 4019 a_sle32 twice_antenna_gain; 4020 __le32 power_limit; 4021 __le32 rate_max; 4022 __le32 num_tx_chain; 4023 __le32 ctl; 4024 __le32 flags; 4025 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 4026 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4027 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4028 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4029 u8 rates_array[WMI_TPC_RATE_MAX]; 4030 } __packed; 4031 4032 /* Transmit power scale factor. */ 4033 enum wmi_tp_scale { 4034 WMI_TP_SCALE_MAX = 0, /* no scaling (default) */ 4035 WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ 4036 WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ 4037 WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ 4038 WMI_TP_SCALE_MIN = 4, /* min, but still on */ 4039 WMI_TP_SCALE_SIZE = 5, /* max num of enum */ 4040 }; 4041 4042 struct wmi_pdev_chanlist_update_event { 4043 /* number of channels */ 4044 __le32 num_chan; 4045 /* array of channels */ 4046 struct wmi_channel channel_list[1]; 4047 } __packed; 4048 4049 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32) 4050 4051 struct wmi_debug_mesg_event { 4052 /* message buffer, NULL terminated */ 4053 char bufp[WMI_MAX_DEBUG_MESG]; 4054 } __packed; 4055 4056 enum { 4057 /* P2P device */ 4058 VDEV_SUBTYPE_P2PDEV = 0, 4059 /* P2P client */ 4060 VDEV_SUBTYPE_P2PCLI, 4061 /* P2P GO */ 4062 VDEV_SUBTYPE_P2PGO, 4063 /* BT3.0 HS */ 4064 VDEV_SUBTYPE_BT, 4065 }; 4066 4067 struct wmi_pdev_set_channel_cmd { 4068 /* idnore power , only use flags , mode and freq */ 4069 struct wmi_channel chan; 4070 } __packed; 4071 4072 struct wmi_pdev_pktlog_enable_cmd { 4073 __le32 ev_bitmap; 4074 } __packed; 4075 4076 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */ 4077 #define WMI_DSCP_MAP_MAX (64) 4078 struct wmi_pdev_set_dscp_tid_map_cmd { 4079 /* map indicating DSCP to TID conversion */ 4080 __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX]; 4081 } __packed; 4082 4083 enum mcast_bcast_rate_id { 4084 WMI_SET_MCAST_RATE, 4085 WMI_SET_BCAST_RATE 4086 }; 4087 4088 struct mcast_bcast_rate { 4089 enum mcast_bcast_rate_id rate_id; 4090 __le32 rate; 4091 } __packed; 4092 4093 struct wmi_wmm_params { 4094 __le32 cwmin; 4095 __le32 cwmax; 4096 __le32 aifs; 4097 __le32 txop; 4098 __le32 acm; 4099 __le32 no_ack; 4100 } __packed; 4101 4102 struct wmi_pdev_set_wmm_params { 4103 struct wmi_wmm_params ac_be; 4104 struct wmi_wmm_params ac_bk; 4105 struct wmi_wmm_params ac_vi; 4106 struct wmi_wmm_params ac_vo; 4107 } __packed; 4108 4109 struct wmi_wmm_params_arg { 4110 u32 cwmin; 4111 u32 cwmax; 4112 u32 aifs; 4113 u32 txop; 4114 u32 acm; 4115 u32 no_ack; 4116 }; 4117 4118 struct wmi_wmm_params_all_arg { 4119 struct wmi_wmm_params_arg ac_be; 4120 struct wmi_wmm_params_arg ac_bk; 4121 struct wmi_wmm_params_arg ac_vi; 4122 struct wmi_wmm_params_arg ac_vo; 4123 }; 4124 4125 struct wmi_pdev_stats_tx { 4126 /* Num HTT cookies queued to dispatch list */ 4127 __le32 comp_queued; 4128 4129 /* Num HTT cookies dispatched */ 4130 __le32 comp_delivered; 4131 4132 /* Num MSDU queued to WAL */ 4133 __le32 msdu_enqued; 4134 4135 /* Num MPDU queue to WAL */ 4136 __le32 mpdu_enqued; 4137 4138 /* Num MSDUs dropped by WMM limit */ 4139 __le32 wmm_drop; 4140 4141 /* Num Local frames queued */ 4142 __le32 local_enqued; 4143 4144 /* Num Local frames done */ 4145 __le32 local_freed; 4146 4147 /* Num queued to HW */ 4148 __le32 hw_queued; 4149 4150 /* Num PPDU reaped from HW */ 4151 __le32 hw_reaped; 4152 4153 /* Num underruns */ 4154 __le32 underrun; 4155 4156 /* Num PPDUs cleaned up in TX abort */ 4157 __le32 tx_abort; 4158 4159 /* Num MPDUs requed by SW */ 4160 __le32 mpdus_requed; 4161 4162 /* excessive retries */ 4163 __le32 tx_ko; 4164 4165 /* data hw rate code */ 4166 __le32 data_rc; 4167 4168 /* Scheduler self triggers */ 4169 __le32 self_triggers; 4170 4171 /* frames dropped due to excessive sw retries */ 4172 __le32 sw_retry_failure; 4173 4174 /* illegal rate phy errors */ 4175 __le32 illgl_rate_phy_err; 4176 4177 /* wal pdev continuous xretry */ 4178 __le32 pdev_cont_xretry; 4179 4180 /* wal pdev continous xretry */ 4181 __le32 pdev_tx_timeout; 4182 4183 /* wal pdev resets */ 4184 __le32 pdev_resets; 4185 4186 /* frames dropped due to non-availability of stateless TIDs */ 4187 __le32 stateless_tid_alloc_failure; 4188 4189 __le32 phy_underrun; 4190 4191 /* MPDU is more than txop limit */ 4192 __le32 txop_ovf; 4193 } __packed; 4194 4195 struct wmi_10_4_pdev_stats_tx { 4196 /* Num HTT cookies queued to dispatch list */ 4197 __le32 comp_queued; 4198 4199 /* Num HTT cookies dispatched */ 4200 __le32 comp_delivered; 4201 4202 /* Num MSDU queued to WAL */ 4203 __le32 msdu_enqued; 4204 4205 /* Num MPDU queue to WAL */ 4206 __le32 mpdu_enqued; 4207 4208 /* Num MSDUs dropped by WMM limit */ 4209 __le32 wmm_drop; 4210 4211 /* Num Local frames queued */ 4212 __le32 local_enqued; 4213 4214 /* Num Local frames done */ 4215 __le32 local_freed; 4216 4217 /* Num queued to HW */ 4218 __le32 hw_queued; 4219 4220 /* Num PPDU reaped from HW */ 4221 __le32 hw_reaped; 4222 4223 /* Num underruns */ 4224 __le32 underrun; 4225 4226 /* HW Paused. */ 4227 __le32 hw_paused; 4228 4229 /* Num PPDUs cleaned up in TX abort */ 4230 __le32 tx_abort; 4231 4232 /* Num MPDUs requed by SW */ 4233 __le32 mpdus_requed; 4234 4235 /* excessive retries */ 4236 __le32 tx_ko; 4237 4238 /* data hw rate code */ 4239 __le32 data_rc; 4240 4241 /* Scheduler self triggers */ 4242 __le32 self_triggers; 4243 4244 /* frames dropped due to excessive sw retries */ 4245 __le32 sw_retry_failure; 4246 4247 /* illegal rate phy errors */ 4248 __le32 illgl_rate_phy_err; 4249 4250 /* wal pdev continuous xretry */ 4251 __le32 pdev_cont_xretry; 4252 4253 /* wal pdev tx timeouts */ 4254 __le32 pdev_tx_timeout; 4255 4256 /* wal pdev resets */ 4257 __le32 pdev_resets; 4258 4259 /* frames dropped due to non-availability of stateless TIDs */ 4260 __le32 stateless_tid_alloc_failure; 4261 4262 __le32 phy_underrun; 4263 4264 /* MPDU is more than txop limit */ 4265 __le32 txop_ovf; 4266 4267 /* Number of Sequences posted */ 4268 __le32 seq_posted; 4269 4270 /* Number of Sequences failed queueing */ 4271 __le32 seq_failed_queueing; 4272 4273 /* Number of Sequences completed */ 4274 __le32 seq_completed; 4275 4276 /* Number of Sequences restarted */ 4277 __le32 seq_restarted; 4278 4279 /* Number of MU Sequences posted */ 4280 __le32 mu_seq_posted; 4281 4282 /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */ 4283 __le32 mpdus_sw_flush; 4284 4285 /* Num MPDUs filtered by HW, all filter condition (TTL expired) */ 4286 __le32 mpdus_hw_filter; 4287 4288 /* Num MPDUs truncated by PDG 4289 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw) 4290 */ 4291 __le32 mpdus_truncated; 4292 4293 /* Num MPDUs that was tried but didn't receive ACK or BA */ 4294 __le32 mpdus_ack_failed; 4295 4296 /* Num MPDUs that was dropped due to expiry. */ 4297 __le32 mpdus_expired; 4298 } __packed; 4299 4300 struct wmi_pdev_stats_rx { 4301 /* Cnts any change in ring routing mid-ppdu */ 4302 __le32 mid_ppdu_route_change; 4303 4304 /* Total number of statuses processed */ 4305 __le32 status_rcvd; 4306 4307 /* Extra frags on rings 0-3 */ 4308 __le32 r0_frags; 4309 __le32 r1_frags; 4310 __le32 r2_frags; 4311 __le32 r3_frags; 4312 4313 /* MSDUs / MPDUs delivered to HTT */ 4314 __le32 htt_msdus; 4315 __le32 htt_mpdus; 4316 4317 /* MSDUs / MPDUs delivered to local stack */ 4318 __le32 loc_msdus; 4319 __le32 loc_mpdus; 4320 4321 /* AMSDUs that have more MSDUs than the status ring size */ 4322 __le32 oversize_amsdu; 4323 4324 /* Number of PHY errors */ 4325 __le32 phy_errs; 4326 4327 /* Number of PHY errors drops */ 4328 __le32 phy_err_drop; 4329 4330 /* Number of mpdu errors - FCS, MIC, ENC etc. */ 4331 __le32 mpdu_errs; 4332 } __packed; 4333 4334 struct wmi_pdev_stats_peer { 4335 /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ 4336 __le32 dummy; 4337 } __packed; 4338 4339 enum wmi_stats_id { 4340 WMI_STAT_PEER = BIT(0), 4341 WMI_STAT_AP = BIT(1), 4342 WMI_STAT_PDEV = BIT(2), 4343 WMI_STAT_VDEV = BIT(3), 4344 WMI_STAT_BCNFLT = BIT(4), 4345 WMI_STAT_VDEV_RATE = BIT(5), 4346 }; 4347 4348 enum wmi_10_4_stats_id { 4349 WMI_10_4_STAT_PEER = BIT(0), 4350 WMI_10_4_STAT_AP = BIT(1), 4351 WMI_10_4_STAT_INST = BIT(2), 4352 WMI_10_4_STAT_PEER_EXTD = BIT(3), 4353 }; 4354 4355 struct wlan_inst_rssi_args { 4356 __le16 cfg_retry_count; 4357 __le16 retry_count; 4358 }; 4359 4360 struct wmi_request_stats_cmd { 4361 __le32 stats_id; 4362 4363 __le32 vdev_id; 4364 4365 /* peer MAC address */ 4366 struct wmi_mac_addr peer_macaddr; 4367 4368 /* Instantaneous RSSI arguments */ 4369 struct wlan_inst_rssi_args inst_rssi_args; 4370 } __packed; 4371 4372 /* Suspend option */ 4373 enum { 4374 /* suspend */ 4375 WMI_PDEV_SUSPEND, 4376 4377 /* suspend and disable all interrupts */ 4378 WMI_PDEV_SUSPEND_AND_DISABLE_INTR, 4379 }; 4380 4381 struct wmi_pdev_suspend_cmd { 4382 /* suspend option sent to target */ 4383 __le32 suspend_opt; 4384 } __packed; 4385 4386 struct wmi_stats_event { 4387 __le32 stats_id; /* WMI_STAT_ */ 4388 /* 4389 * number of pdev stats event structures 4390 * (wmi_pdev_stats) 0 or 1 4391 */ 4392 __le32 num_pdev_stats; 4393 /* 4394 * number of vdev stats event structures 4395 * (wmi_vdev_stats) 0 or max vdevs 4396 */ 4397 __le32 num_vdev_stats; 4398 /* 4399 * number of peer stats event structures 4400 * (wmi_peer_stats) 0 or max peers 4401 */ 4402 __le32 num_peer_stats; 4403 __le32 num_bcnflt_stats; 4404 /* 4405 * followed by 4406 * num_pdev_stats * size of(struct wmi_pdev_stats) 4407 * num_vdev_stats * size of(struct wmi_vdev_stats) 4408 * num_peer_stats * size of(struct wmi_peer_stats) 4409 * 4410 * By having a zero sized array, the pointer to data area 4411 * becomes available without increasing the struct size 4412 */ 4413 u8 data[0]; 4414 } __packed; 4415 4416 struct wmi_10_2_stats_event { 4417 __le32 stats_id; /* %WMI_REQUEST_ */ 4418 __le32 num_pdev_stats; 4419 __le32 num_pdev_ext_stats; 4420 __le32 num_vdev_stats; 4421 __le32 num_peer_stats; 4422 __le32 num_bcnflt_stats; 4423 u8 data[0]; 4424 } __packed; 4425 4426 /* 4427 * PDEV statistics 4428 * TODO: add all PDEV stats here 4429 */ 4430 struct wmi_pdev_stats_base { 4431 __le32 chan_nf; 4432 __le32 tx_frame_count; /* Cycles spent transmitting frames */ 4433 __le32 rx_frame_count; /* Cycles spent receiving frames */ 4434 __le32 rx_clear_count; /* Total channel busy time, evidently */ 4435 __le32 cycle_count; /* Total on-channel time */ 4436 __le32 phy_err_count; 4437 __le32 chan_tx_pwr; 4438 } __packed; 4439 4440 struct wmi_pdev_stats { 4441 struct wmi_pdev_stats_base base; 4442 struct wmi_pdev_stats_tx tx; 4443 struct wmi_pdev_stats_rx rx; 4444 struct wmi_pdev_stats_peer peer; 4445 } __packed; 4446 4447 struct wmi_pdev_stats_extra { 4448 __le32 ack_rx_bad; 4449 __le32 rts_bad; 4450 __le32 rts_good; 4451 __le32 fcs_bad; 4452 __le32 no_beacons; 4453 __le32 mib_int_count; 4454 } __packed; 4455 4456 struct wmi_10x_pdev_stats { 4457 struct wmi_pdev_stats_base base; 4458 struct wmi_pdev_stats_tx tx; 4459 struct wmi_pdev_stats_rx rx; 4460 struct wmi_pdev_stats_peer peer; 4461 struct wmi_pdev_stats_extra extra; 4462 } __packed; 4463 4464 struct wmi_pdev_stats_mem { 4465 __le32 dram_free; 4466 __le32 iram_free; 4467 } __packed; 4468 4469 struct wmi_10_2_pdev_stats { 4470 struct wmi_pdev_stats_base base; 4471 struct wmi_pdev_stats_tx tx; 4472 __le32 mc_drop; 4473 struct wmi_pdev_stats_rx rx; 4474 __le32 pdev_rx_timeout; 4475 struct wmi_pdev_stats_mem mem; 4476 struct wmi_pdev_stats_peer peer; 4477 struct wmi_pdev_stats_extra extra; 4478 } __packed; 4479 4480 struct wmi_10_4_pdev_stats { 4481 struct wmi_pdev_stats_base base; 4482 struct wmi_10_4_pdev_stats_tx tx; 4483 struct wmi_pdev_stats_rx rx; 4484 __le32 rx_ovfl_errs; 4485 struct wmi_pdev_stats_mem mem; 4486 __le32 sram_free_size; 4487 struct wmi_pdev_stats_extra extra; 4488 } __packed; 4489 4490 /* 4491 * VDEV statistics 4492 * TODO: add all VDEV stats here 4493 */ 4494 struct wmi_vdev_stats { 4495 __le32 vdev_id; 4496 } __packed; 4497 4498 /* 4499 * peer statistics. 4500 * TODO: add more stats 4501 */ 4502 struct wmi_peer_stats { 4503 struct wmi_mac_addr peer_macaddr; 4504 __le32 peer_rssi; 4505 __le32 peer_tx_rate; 4506 } __packed; 4507 4508 struct wmi_10x_peer_stats { 4509 struct wmi_peer_stats old; 4510 __le32 peer_rx_rate; 4511 } __packed; 4512 4513 struct wmi_10_2_peer_stats { 4514 struct wmi_peer_stats old; 4515 __le32 peer_rx_rate; 4516 __le32 current_per; 4517 __le32 retries; 4518 __le32 tx_rate_count; 4519 __le32 max_4ms_frame_len; 4520 __le32 total_sub_frames; 4521 __le32 tx_bytes; 4522 __le32 num_pkt_loss_overflow[4]; 4523 __le32 num_pkt_loss_excess_retry[4]; 4524 } __packed; 4525 4526 struct wmi_10_2_4_peer_stats { 4527 struct wmi_10_2_peer_stats common; 4528 __le32 peer_rssi_changed; 4529 } __packed; 4530 4531 struct wmi_10_2_4_ext_peer_stats { 4532 struct wmi_10_2_peer_stats common; 4533 __le32 peer_rssi_changed; 4534 __le32 rx_duration; 4535 } __packed; 4536 4537 struct wmi_10_4_peer_stats { 4538 struct wmi_mac_addr peer_macaddr; 4539 __le32 peer_rssi; 4540 __le32 peer_rssi_seq_num; 4541 __le32 peer_tx_rate; 4542 __le32 peer_rx_rate; 4543 __le32 current_per; 4544 __le32 retries; 4545 __le32 tx_rate_count; 4546 __le32 max_4ms_frame_len; 4547 __le32 total_sub_frames; 4548 __le32 tx_bytes; 4549 __le32 num_pkt_loss_overflow[4]; 4550 __le32 num_pkt_loss_excess_retry[4]; 4551 __le32 peer_rssi_changed; 4552 } __packed; 4553 4554 struct wmi_10_4_peer_extd_stats { 4555 struct wmi_mac_addr peer_macaddr; 4556 __le32 inactive_time; 4557 __le32 peer_chain_rssi; 4558 __le32 rx_duration; 4559 __le32 reserved[10]; 4560 } __packed; 4561 4562 struct wmi_10_4_bss_bcn_stats { 4563 __le32 vdev_id; 4564 __le32 bss_bcns_dropped; 4565 __le32 bss_bcn_delivered; 4566 } __packed; 4567 4568 struct wmi_10_4_bss_bcn_filter_stats { 4569 __le32 bcns_dropped; 4570 __le32 bcns_delivered; 4571 __le32 active_filters; 4572 struct wmi_10_4_bss_bcn_stats bss_stats; 4573 } __packed; 4574 4575 struct wmi_10_2_pdev_ext_stats { 4576 __le32 rx_rssi_comb; 4577 __le32 rx_rssi[4]; 4578 __le32 rx_mcs[10]; 4579 __le32 tx_mcs[10]; 4580 __le32 ack_rssi; 4581 } __packed; 4582 4583 struct wmi_vdev_create_cmd { 4584 __le32 vdev_id; 4585 __le32 vdev_type; 4586 __le32 vdev_subtype; 4587 struct wmi_mac_addr vdev_macaddr; 4588 } __packed; 4589 4590 enum wmi_vdev_type { 4591 WMI_VDEV_TYPE_AP = 1, 4592 WMI_VDEV_TYPE_STA = 2, 4593 WMI_VDEV_TYPE_IBSS = 3, 4594 WMI_VDEV_TYPE_MONITOR = 4, 4595 }; 4596 4597 enum wmi_vdev_subtype { 4598 WMI_VDEV_SUBTYPE_NONE, 4599 WMI_VDEV_SUBTYPE_P2P_DEVICE, 4600 WMI_VDEV_SUBTYPE_P2P_CLIENT, 4601 WMI_VDEV_SUBTYPE_P2P_GO, 4602 WMI_VDEV_SUBTYPE_PROXY_STA, 4603 WMI_VDEV_SUBTYPE_MESH_11S, 4604 WMI_VDEV_SUBTYPE_MESH_NON_11S, 4605 }; 4606 4607 enum wmi_vdev_subtype_legacy { 4608 WMI_VDEV_SUBTYPE_LEGACY_NONE = 0, 4609 WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1, 4610 WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2, 4611 WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3, 4612 WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4, 4613 }; 4614 4615 enum wmi_vdev_subtype_10_2_4 { 4616 WMI_VDEV_SUBTYPE_10_2_4_NONE = 0, 4617 WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1, 4618 WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2, 4619 WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3, 4620 WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4, 4621 WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5, 4622 }; 4623 4624 enum wmi_vdev_subtype_10_4 { 4625 WMI_VDEV_SUBTYPE_10_4_NONE = 0, 4626 WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1, 4627 WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2, 4628 WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3, 4629 WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4, 4630 WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5, 4631 WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6, 4632 }; 4633 4634 /* values for vdev_subtype */ 4635 4636 /* values for vdev_start_request flags */ 4637 /* 4638 * Indicates that AP VDEV uses hidden ssid. only valid for 4639 * AP/GO 4640 */ 4641 #define WMI_VDEV_START_HIDDEN_SSID (1 << 0) 4642 /* 4643 * Indicates if robust management frame/management frame 4644 * protection is enabled. For GO/AP vdevs, it indicates that 4645 * it may support station/client associations with RMF enabled. 4646 * For STA/client vdevs, it indicates that sta will 4647 * associate with AP with RMF enabled. 4648 */ 4649 #define WMI_VDEV_START_PMF_ENABLED (1 << 1) 4650 4651 struct wmi_p2p_noa_descriptor { 4652 __le32 type_count; /* 255: continuous schedule, 0: reserved */ 4653 __le32 duration; /* Absent period duration in micro seconds */ 4654 __le32 interval; /* Absent period interval in micro seconds */ 4655 __le32 start_time; /* 32 bit tsf time when in starts */ 4656 } __packed; 4657 4658 struct wmi_vdev_start_request_cmd { 4659 /* WMI channel */ 4660 struct wmi_channel chan; 4661 /* unique id identifying the VDEV, generated by the caller */ 4662 __le32 vdev_id; 4663 /* requestor id identifying the caller module */ 4664 __le32 requestor_id; 4665 /* beacon interval from received beacon */ 4666 __le32 beacon_interval; 4667 /* DTIM Period from the received beacon */ 4668 __le32 dtim_period; 4669 /* Flags */ 4670 __le32 flags; 4671 /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ 4672 struct wmi_ssid ssid; 4673 /* beacon/probe response xmit rate. Applicable for SoftAP. */ 4674 __le32 bcn_tx_rate; 4675 /* beacon/probe response xmit power. Applicable for SoftAP. */ 4676 __le32 bcn_tx_power; 4677 /* number of p2p NOA descriptor(s) from scan entry */ 4678 __le32 num_noa_descriptors; 4679 /* 4680 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID. 4681 * During CAC, Our HW shouldn't ack ditected frames 4682 */ 4683 __le32 disable_hw_ack; 4684 /* actual p2p NOA descriptor from scan entry */ 4685 struct wmi_p2p_noa_descriptor noa_descriptors[2]; 4686 } __packed; 4687 4688 struct wmi_vdev_restart_request_cmd { 4689 struct wmi_vdev_start_request_cmd vdev_start_request_cmd; 4690 } __packed; 4691 4692 struct wmi_vdev_start_request_arg { 4693 u32 vdev_id; 4694 struct wmi_channel_arg channel; 4695 u32 bcn_intval; 4696 u32 dtim_period; 4697 u8 *ssid; 4698 u32 ssid_len; 4699 u32 bcn_tx_rate; 4700 u32 bcn_tx_power; 4701 bool disable_hw_ack; 4702 bool hidden_ssid; 4703 bool pmf_enabled; 4704 }; 4705 4706 struct wmi_vdev_delete_cmd { 4707 /* unique id identifying the VDEV, generated by the caller */ 4708 __le32 vdev_id; 4709 } __packed; 4710 4711 struct wmi_vdev_up_cmd { 4712 __le32 vdev_id; 4713 __le32 vdev_assoc_id; 4714 struct wmi_mac_addr vdev_bssid; 4715 } __packed; 4716 4717 struct wmi_vdev_stop_cmd { 4718 __le32 vdev_id; 4719 } __packed; 4720 4721 struct wmi_vdev_down_cmd { 4722 __le32 vdev_id; 4723 } __packed; 4724 4725 struct wmi_vdev_standby_response_cmd { 4726 /* unique id identifying the VDEV, generated by the caller */ 4727 __le32 vdev_id; 4728 } __packed; 4729 4730 struct wmi_vdev_resume_response_cmd { 4731 /* unique id identifying the VDEV, generated by the caller */ 4732 __le32 vdev_id; 4733 } __packed; 4734 4735 struct wmi_vdev_set_param_cmd { 4736 __le32 vdev_id; 4737 __le32 param_id; 4738 __le32 param_value; 4739 } __packed; 4740 4741 #define WMI_MAX_KEY_INDEX 3 4742 #define WMI_MAX_KEY_LEN 32 4743 4744 #define WMI_KEY_PAIRWISE 0x00 4745 #define WMI_KEY_GROUP 0x01 4746 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */ 4747 4748 struct wmi_key_seq_counter { 4749 __le32 key_seq_counter_l; 4750 __le32 key_seq_counter_h; 4751 } __packed; 4752 4753 #define WMI_CIPHER_NONE 0x0 /* clear key */ 4754 #define WMI_CIPHER_WEP 0x1 4755 #define WMI_CIPHER_TKIP 0x2 4756 #define WMI_CIPHER_AES_OCB 0x3 4757 #define WMI_CIPHER_AES_CCM 0x4 4758 #define WMI_CIPHER_WAPI 0x5 4759 #define WMI_CIPHER_CKIP 0x6 4760 #define WMI_CIPHER_AES_CMAC 0x7 4761 #define WMI_CIPHER_AES_GCM 0x8 4762 4763 struct wmi_vdev_install_key_cmd { 4764 __le32 vdev_id; 4765 struct wmi_mac_addr peer_macaddr; 4766 __le32 key_idx; 4767 __le32 key_flags; 4768 __le32 key_cipher; /* %WMI_CIPHER_ */ 4769 struct wmi_key_seq_counter key_rsc_counter; 4770 struct wmi_key_seq_counter key_global_rsc_counter; 4771 struct wmi_key_seq_counter key_tsc_counter; 4772 u8 wpi_key_rsc_counter[16]; 4773 u8 wpi_key_tsc_counter[16]; 4774 __le32 key_len; 4775 __le32 key_txmic_len; 4776 __le32 key_rxmic_len; 4777 4778 /* contains key followed by tx mic followed by rx mic */ 4779 u8 key_data[0]; 4780 } __packed; 4781 4782 struct wmi_vdev_install_key_arg { 4783 u32 vdev_id; 4784 const u8 *macaddr; 4785 u32 key_idx; 4786 u32 key_flags; 4787 u32 key_cipher; 4788 u32 key_len; 4789 u32 key_txmic_len; 4790 u32 key_rxmic_len; 4791 const void *key_data; 4792 }; 4793 4794 /* 4795 * vdev fixed rate format: 4796 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_ 4797 * - nss - b5:b4 - ss number (0 mean 1ss) 4798 * - rate_mcs - b3:b0 - as below 4799 * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps, 4800 * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s) 4801 * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps, 4802 * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps 4803 * HT/VHT: MCS index 4804 */ 4805 4806 /* Preamble types to be used with VDEV fixed rate configuration */ 4807 enum wmi_rate_preamble { 4808 WMI_RATE_PREAMBLE_OFDM, 4809 WMI_RATE_PREAMBLE_CCK, 4810 WMI_RATE_PREAMBLE_HT, 4811 WMI_RATE_PREAMBLE_VHT, 4812 }; 4813 4814 #define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3)) 4815 #define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3) 4816 #define ATH10K_HW_MCS_RATE(rate) ((rate) & 0xf) 4817 #define ATH10K_HW_LEGACY_RATE(rate) ((rate) & 0x3f) 4818 #define ATH10K_HW_BW(flags) (((flags) >> 3) & 0x3) 4819 #define ATH10K_HW_GI(flags) (((flags) >> 5) & 0x1) 4820 #define ATH10K_HW_RATECODE(rate, nss, preamble) \ 4821 (((preamble) << 6) | ((nss) << 4) | (rate)) 4822 4823 #define VHT_MCS_NUM 10 4824 #define VHT_BW_NUM 4 4825 #define VHT_NSS_NUM 4 4826 4827 /* Value to disable fixed rate setting */ 4828 #define WMI_FIXED_RATE_NONE (0xff) 4829 4830 struct wmi_vdev_param_map { 4831 u32 rts_threshold; 4832 u32 fragmentation_threshold; 4833 u32 beacon_interval; 4834 u32 listen_interval; 4835 u32 multicast_rate; 4836 u32 mgmt_tx_rate; 4837 u32 slot_time; 4838 u32 preamble; 4839 u32 swba_time; 4840 u32 wmi_vdev_stats_update_period; 4841 u32 wmi_vdev_pwrsave_ageout_time; 4842 u32 wmi_vdev_host_swba_interval; 4843 u32 dtim_period; 4844 u32 wmi_vdev_oc_scheduler_air_time_limit; 4845 u32 wds; 4846 u32 atim_window; 4847 u32 bmiss_count_max; 4848 u32 bmiss_first_bcnt; 4849 u32 bmiss_final_bcnt; 4850 u32 feature_wmm; 4851 u32 chwidth; 4852 u32 chextoffset; 4853 u32 disable_htprotection; 4854 u32 sta_quickkickout; 4855 u32 mgmt_rate; 4856 u32 protection_mode; 4857 u32 fixed_rate; 4858 u32 sgi; 4859 u32 ldpc; 4860 u32 tx_stbc; 4861 u32 rx_stbc; 4862 u32 intra_bss_fwd; 4863 u32 def_keyid; 4864 u32 nss; 4865 u32 bcast_data_rate; 4866 u32 mcast_data_rate; 4867 u32 mcast_indicate; 4868 u32 dhcp_indicate; 4869 u32 unknown_dest_indicate; 4870 u32 ap_keepalive_min_idle_inactive_time_secs; 4871 u32 ap_keepalive_max_idle_inactive_time_secs; 4872 u32 ap_keepalive_max_unresponsive_time_secs; 4873 u32 ap_enable_nawds; 4874 u32 mcast2ucast_set; 4875 u32 enable_rtscts; 4876 u32 txbf; 4877 u32 packet_powersave; 4878 u32 drop_unencry; 4879 u32 tx_encap_type; 4880 u32 ap_detect_out_of_sync_sleeping_sta_time_secs; 4881 u32 rc_num_retries; 4882 u32 cabq_maxdur; 4883 u32 mfptest_set; 4884 u32 rts_fixed_rate; 4885 u32 vht_sgimask; 4886 u32 vht80_ratemask; 4887 u32 early_rx_adjust_enable; 4888 u32 early_rx_tgt_bmiss_num; 4889 u32 early_rx_bmiss_sample_cycle; 4890 u32 early_rx_slop_step; 4891 u32 early_rx_init_slop; 4892 u32 early_rx_adjust_pause; 4893 u32 proxy_sta; 4894 u32 meru_vc; 4895 u32 rx_decap_type; 4896 u32 bw_nss_ratemask; 4897 u32 inc_tsf; 4898 u32 dec_tsf; 4899 }; 4900 4901 #define WMI_VDEV_PARAM_UNSUPPORTED 0 4902 4903 /* the definition of different VDEV parameters */ 4904 enum wmi_vdev_param { 4905 /* RTS Threshold */ 4906 WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1, 4907 /* Fragmentation threshold */ 4908 WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 4909 /* beacon interval in TUs */ 4910 WMI_VDEV_PARAM_BEACON_INTERVAL, 4911 /* Listen interval in TUs */ 4912 WMI_VDEV_PARAM_LISTEN_INTERVAL, 4913 /* multicast rate in Mbps */ 4914 WMI_VDEV_PARAM_MULTICAST_RATE, 4915 /* management frame rate in Mbps */ 4916 WMI_VDEV_PARAM_MGMT_TX_RATE, 4917 /* slot time (long vs short) */ 4918 WMI_VDEV_PARAM_SLOT_TIME, 4919 /* preamble (long vs short) */ 4920 WMI_VDEV_PARAM_PREAMBLE, 4921 /* SWBA time (time before tbtt in msec) */ 4922 WMI_VDEV_PARAM_SWBA_TIME, 4923 /* time period for updating VDEV stats */ 4924 WMI_VDEV_STATS_UPDATE_PERIOD, 4925 /* age out time in msec for frames queued for station in power save */ 4926 WMI_VDEV_PWRSAVE_AGEOUT_TIME, 4927 /* 4928 * Host SWBA interval (time in msec before tbtt for SWBA event 4929 * generation). 4930 */ 4931 WMI_VDEV_HOST_SWBA_INTERVAL, 4932 /* DTIM period (specified in units of num beacon intervals) */ 4933 WMI_VDEV_PARAM_DTIM_PERIOD, 4934 /* 4935 * scheduler air time limit for this VDEV. used by off chan 4936 * scheduler. 4937 */ 4938 WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 4939 /* enable/dsiable WDS for this VDEV */ 4940 WMI_VDEV_PARAM_WDS, 4941 /* ATIM Window */ 4942 WMI_VDEV_PARAM_ATIM_WINDOW, 4943 /* BMISS max */ 4944 WMI_VDEV_PARAM_BMISS_COUNT_MAX, 4945 /* BMISS first time */ 4946 WMI_VDEV_PARAM_BMISS_FIRST_BCNT, 4947 /* BMISS final time */ 4948 WMI_VDEV_PARAM_BMISS_FINAL_BCNT, 4949 /* WMM enables/disabled */ 4950 WMI_VDEV_PARAM_FEATURE_WMM, 4951 /* Channel width */ 4952 WMI_VDEV_PARAM_CHWIDTH, 4953 /* Channel Offset */ 4954 WMI_VDEV_PARAM_CHEXTOFFSET, 4955 /* Disable HT Protection */ 4956 WMI_VDEV_PARAM_DISABLE_HTPROTECTION, 4957 /* Quick STA Kickout */ 4958 WMI_VDEV_PARAM_STA_QUICKKICKOUT, 4959 /* Rate to be used with Management frames */ 4960 WMI_VDEV_PARAM_MGMT_RATE, 4961 /* Protection Mode */ 4962 WMI_VDEV_PARAM_PROTECTION_MODE, 4963 /* Fixed rate setting */ 4964 WMI_VDEV_PARAM_FIXED_RATE, 4965 /* Short GI Enable/Disable */ 4966 WMI_VDEV_PARAM_SGI, 4967 /* Enable LDPC */ 4968 WMI_VDEV_PARAM_LDPC, 4969 /* Enable Tx STBC */ 4970 WMI_VDEV_PARAM_TX_STBC, 4971 /* Enable Rx STBC */ 4972 WMI_VDEV_PARAM_RX_STBC, 4973 /* Intra BSS forwarding */ 4974 WMI_VDEV_PARAM_INTRA_BSS_FWD, 4975 /* Setting Default xmit key for Vdev */ 4976 WMI_VDEV_PARAM_DEF_KEYID, 4977 /* NSS width */ 4978 WMI_VDEV_PARAM_NSS, 4979 /* Set the custom rate for the broadcast data frames */ 4980 WMI_VDEV_PARAM_BCAST_DATA_RATE, 4981 /* Set the custom rate (rate-code) for multicast data frames */ 4982 WMI_VDEV_PARAM_MCAST_DATA_RATE, 4983 /* Tx multicast packet indicate Enable/Disable */ 4984 WMI_VDEV_PARAM_MCAST_INDICATE, 4985 /* Tx DHCP packet indicate Enable/Disable */ 4986 WMI_VDEV_PARAM_DHCP_INDICATE, 4987 /* Enable host inspection of Tx unicast packet to unknown destination */ 4988 WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 4989 4990 /* The minimum amount of time AP begins to consider STA inactive */ 4991 WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 4992 4993 /* 4994 * An associated STA is considered inactive when there is no recent 4995 * TX/RX activity and no downlink frames are buffered for it. Once a 4996 * STA exceeds the maximum idle inactive time, the AP will send an 4997 * 802.11 data-null as a keep alive to verify the STA is still 4998 * associated. If the STA does ACK the data-null, or if the data-null 4999 * is buffered and the STA does not retrieve it, the STA will be 5000 * considered unresponsive 5001 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 5002 */ 5003 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5004 5005 /* 5006 * An associated STA is considered unresponsive if there is no recent 5007 * TX/RX activity and downlink frames are buffered for it. Once a STA 5008 * exceeds the maximum unresponsive time, the AP will send a 5009 * WMI_STA_KICKOUT event to the host so the STA can be deleted. 5010 */ 5011 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5012 5013 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 5014 WMI_VDEV_PARAM_AP_ENABLE_NAWDS, 5015 /* Enable/Disable RTS-CTS */ 5016 WMI_VDEV_PARAM_ENABLE_RTSCTS, 5017 /* Enable TXBFee/er */ 5018 WMI_VDEV_PARAM_TXBF, 5019 5020 /* Set packet power save */ 5021 WMI_VDEV_PARAM_PACKET_POWERSAVE, 5022 5023 /* 5024 * Drops un-encrypted packets if eceived in an encrypted connection 5025 * otherwise forwards to host. 5026 */ 5027 WMI_VDEV_PARAM_DROP_UNENCRY, 5028 5029 /* 5030 * Set the encapsulation type for frames. 5031 */ 5032 WMI_VDEV_PARAM_TX_ENCAP_TYPE, 5033 }; 5034 5035 /* the definition of different VDEV parameters */ 5036 enum wmi_10x_vdev_param { 5037 /* RTS Threshold */ 5038 WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5039 /* Fragmentation threshold */ 5040 WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5041 /* beacon interval in TUs */ 5042 WMI_10X_VDEV_PARAM_BEACON_INTERVAL, 5043 /* Listen interval in TUs */ 5044 WMI_10X_VDEV_PARAM_LISTEN_INTERVAL, 5045 /* multicast rate in Mbps */ 5046 WMI_10X_VDEV_PARAM_MULTICAST_RATE, 5047 /* management frame rate in Mbps */ 5048 WMI_10X_VDEV_PARAM_MGMT_TX_RATE, 5049 /* slot time (long vs short) */ 5050 WMI_10X_VDEV_PARAM_SLOT_TIME, 5051 /* preamble (long vs short) */ 5052 WMI_10X_VDEV_PARAM_PREAMBLE, 5053 /* SWBA time (time before tbtt in msec) */ 5054 WMI_10X_VDEV_PARAM_SWBA_TIME, 5055 /* time period for updating VDEV stats */ 5056 WMI_10X_VDEV_STATS_UPDATE_PERIOD, 5057 /* age out time in msec for frames queued for station in power save */ 5058 WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME, 5059 /* 5060 * Host SWBA interval (time in msec before tbtt for SWBA event 5061 * generation). 5062 */ 5063 WMI_10X_VDEV_HOST_SWBA_INTERVAL, 5064 /* DTIM period (specified in units of num beacon intervals) */ 5065 WMI_10X_VDEV_PARAM_DTIM_PERIOD, 5066 /* 5067 * scheduler air time limit for this VDEV. used by off chan 5068 * scheduler. 5069 */ 5070 WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5071 /* enable/dsiable WDS for this VDEV */ 5072 WMI_10X_VDEV_PARAM_WDS, 5073 /* ATIM Window */ 5074 WMI_10X_VDEV_PARAM_ATIM_WINDOW, 5075 /* BMISS max */ 5076 WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX, 5077 /* WMM enables/disabled */ 5078 WMI_10X_VDEV_PARAM_FEATURE_WMM, 5079 /* Channel width */ 5080 WMI_10X_VDEV_PARAM_CHWIDTH, 5081 /* Channel Offset */ 5082 WMI_10X_VDEV_PARAM_CHEXTOFFSET, 5083 /* Disable HT Protection */ 5084 WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION, 5085 /* Quick STA Kickout */ 5086 WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT, 5087 /* Rate to be used with Management frames */ 5088 WMI_10X_VDEV_PARAM_MGMT_RATE, 5089 /* Protection Mode */ 5090 WMI_10X_VDEV_PARAM_PROTECTION_MODE, 5091 /* Fixed rate setting */ 5092 WMI_10X_VDEV_PARAM_FIXED_RATE, 5093 /* Short GI Enable/Disable */ 5094 WMI_10X_VDEV_PARAM_SGI, 5095 /* Enable LDPC */ 5096 WMI_10X_VDEV_PARAM_LDPC, 5097 /* Enable Tx STBC */ 5098 WMI_10X_VDEV_PARAM_TX_STBC, 5099 /* Enable Rx STBC */ 5100 WMI_10X_VDEV_PARAM_RX_STBC, 5101 /* Intra BSS forwarding */ 5102 WMI_10X_VDEV_PARAM_INTRA_BSS_FWD, 5103 /* Setting Default xmit key for Vdev */ 5104 WMI_10X_VDEV_PARAM_DEF_KEYID, 5105 /* NSS width */ 5106 WMI_10X_VDEV_PARAM_NSS, 5107 /* Set the custom rate for the broadcast data frames */ 5108 WMI_10X_VDEV_PARAM_BCAST_DATA_RATE, 5109 /* Set the custom rate (rate-code) for multicast data frames */ 5110 WMI_10X_VDEV_PARAM_MCAST_DATA_RATE, 5111 /* Tx multicast packet indicate Enable/Disable */ 5112 WMI_10X_VDEV_PARAM_MCAST_INDICATE, 5113 /* Tx DHCP packet indicate Enable/Disable */ 5114 WMI_10X_VDEV_PARAM_DHCP_INDICATE, 5115 /* Enable host inspection of Tx unicast packet to unknown destination */ 5116 WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5117 5118 /* The minimum amount of time AP begins to consider STA inactive */ 5119 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5120 5121 /* 5122 * An associated STA is considered inactive when there is no recent 5123 * TX/RX activity and no downlink frames are buffered for it. Once a 5124 * STA exceeds the maximum idle inactive time, the AP will send an 5125 * 802.11 data-null as a keep alive to verify the STA is still 5126 * associated. If the STA does ACK the data-null, or if the data-null 5127 * is buffered and the STA does not retrieve it, the STA will be 5128 * considered unresponsive 5129 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 5130 */ 5131 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5132 5133 /* 5134 * An associated STA is considered unresponsive if there is no recent 5135 * TX/RX activity and downlink frames are buffered for it. Once a STA 5136 * exceeds the maximum unresponsive time, the AP will send a 5137 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. 5138 */ 5139 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5140 5141 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 5142 WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS, 5143 5144 WMI_10X_VDEV_PARAM_MCAST2UCAST_SET, 5145 /* Enable/Disable RTS-CTS */ 5146 WMI_10X_VDEV_PARAM_ENABLE_RTSCTS, 5147 5148 WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 5149 5150 /* following are available as of firmware 10.2 */ 5151 WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE, 5152 WMI_10X_VDEV_PARAM_CABQ_MAXDUR, 5153 WMI_10X_VDEV_PARAM_MFPTEST_SET, 5154 WMI_10X_VDEV_PARAM_RTS_FIXED_RATE, 5155 WMI_10X_VDEV_PARAM_VHT_SGIMASK, 5156 WMI_10X_VDEV_PARAM_VHT80_RATEMASK, 5157 WMI_10X_VDEV_PARAM_TSF_INCREMENT, 5158 }; 5159 5160 enum wmi_10_4_vdev_param { 5161 WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5162 WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5163 WMI_10_4_VDEV_PARAM_BEACON_INTERVAL, 5164 WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL, 5165 WMI_10_4_VDEV_PARAM_MULTICAST_RATE, 5166 WMI_10_4_VDEV_PARAM_MGMT_TX_RATE, 5167 WMI_10_4_VDEV_PARAM_SLOT_TIME, 5168 WMI_10_4_VDEV_PARAM_PREAMBLE, 5169 WMI_10_4_VDEV_PARAM_SWBA_TIME, 5170 WMI_10_4_VDEV_STATS_UPDATE_PERIOD, 5171 WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME, 5172 WMI_10_4_VDEV_HOST_SWBA_INTERVAL, 5173 WMI_10_4_VDEV_PARAM_DTIM_PERIOD, 5174 WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5175 WMI_10_4_VDEV_PARAM_WDS, 5176 WMI_10_4_VDEV_PARAM_ATIM_WINDOW, 5177 WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX, 5178 WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT, 5179 WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT, 5180 WMI_10_4_VDEV_PARAM_FEATURE_WMM, 5181 WMI_10_4_VDEV_PARAM_CHWIDTH, 5182 WMI_10_4_VDEV_PARAM_CHEXTOFFSET, 5183 WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION, 5184 WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT, 5185 WMI_10_4_VDEV_PARAM_MGMT_RATE, 5186 WMI_10_4_VDEV_PARAM_PROTECTION_MODE, 5187 WMI_10_4_VDEV_PARAM_FIXED_RATE, 5188 WMI_10_4_VDEV_PARAM_SGI, 5189 WMI_10_4_VDEV_PARAM_LDPC, 5190 WMI_10_4_VDEV_PARAM_TX_STBC, 5191 WMI_10_4_VDEV_PARAM_RX_STBC, 5192 WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD, 5193 WMI_10_4_VDEV_PARAM_DEF_KEYID, 5194 WMI_10_4_VDEV_PARAM_NSS, 5195 WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE, 5196 WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE, 5197 WMI_10_4_VDEV_PARAM_MCAST_INDICATE, 5198 WMI_10_4_VDEV_PARAM_DHCP_INDICATE, 5199 WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5200 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5201 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5202 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5203 WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS, 5204 WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET, 5205 WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS, 5206 WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES, 5207 WMI_10_4_VDEV_PARAM_TXBF, 5208 WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE, 5209 WMI_10_4_VDEV_PARAM_DROP_UNENCRY, 5210 WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE, 5211 WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 5212 WMI_10_4_VDEV_PARAM_CABQ_MAXDUR, 5213 WMI_10_4_VDEV_PARAM_MFPTEST_SET, 5214 WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE, 5215 WMI_10_4_VDEV_PARAM_VHT_SGIMASK, 5216 WMI_10_4_VDEV_PARAM_VHT80_RATEMASK, 5217 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE, 5218 WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM, 5219 WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE, 5220 WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP, 5221 WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP, 5222 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE, 5223 WMI_10_4_VDEV_PARAM_PROXY_STA, 5224 WMI_10_4_VDEV_PARAM_MERU_VC, 5225 WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE, 5226 WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK, 5227 WMI_10_4_VDEV_PARAM_SENSOR_AP, 5228 WMI_10_4_VDEV_PARAM_BEACON_RATE, 5229 WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS, 5230 WMI_10_4_VDEV_PARAM_STA_KICKOUT, 5231 WMI_10_4_VDEV_PARAM_CAPABILITIES, 5232 WMI_10_4_VDEV_PARAM_TSF_INCREMENT, 5233 WMI_10_4_VDEV_PARAM_RX_FILTER, 5234 WMI_10_4_VDEV_PARAM_MGMT_TX_POWER, 5235 WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY, 5236 WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS, 5237 WMI_10_4_VDEV_PARAM_TSF_DECREMENT, 5238 }; 5239 5240 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0) 5241 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1) 5242 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2) 5243 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3) 5244 5245 #define WMI_TXBF_STS_CAP_OFFSET_LSB 4 5246 #define WMI_TXBF_STS_CAP_OFFSET_MASK 0x70 5247 #define WMI_TXBF_CONF_IMPLICIT_BF BIT(7) 5248 #define WMI_BF_SOUND_DIM_OFFSET_LSB 8 5249 #define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00 5250 5251 /* slot time long */ 5252 #define WMI_VDEV_SLOT_TIME_LONG 0x1 5253 /* slot time short */ 5254 #define WMI_VDEV_SLOT_TIME_SHORT 0x2 5255 /* preablbe long */ 5256 #define WMI_VDEV_PREAMBLE_LONG 0x1 5257 /* preablbe short */ 5258 #define WMI_VDEV_PREAMBLE_SHORT 0x2 5259 5260 enum wmi_start_event_param { 5261 WMI_VDEV_RESP_START_EVENT = 0, 5262 WMI_VDEV_RESP_RESTART_EVENT, 5263 }; 5264 5265 struct wmi_vdev_start_response_event { 5266 __le32 vdev_id; 5267 __le32 req_id; 5268 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 5269 __le32 status; 5270 } __packed; 5271 5272 struct wmi_vdev_standby_req_event { 5273 /* unique id identifying the VDEV, generated by the caller */ 5274 __le32 vdev_id; 5275 } __packed; 5276 5277 struct wmi_vdev_resume_req_event { 5278 /* unique id identifying the VDEV, generated by the caller */ 5279 __le32 vdev_id; 5280 } __packed; 5281 5282 struct wmi_vdev_stopped_event { 5283 /* unique id identifying the VDEV, generated by the caller */ 5284 __le32 vdev_id; 5285 } __packed; 5286 5287 /* 5288 * common structure used for simple events 5289 * (stopped, resume_req, standby response) 5290 */ 5291 struct wmi_vdev_simple_event { 5292 /* unique id identifying the VDEV, generated by the caller */ 5293 __le32 vdev_id; 5294 } __packed; 5295 5296 /* VDEV start response status codes */ 5297 /* VDEV successfully started */ 5298 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 5299 5300 /* requested VDEV not found */ 5301 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1 5302 5303 /* unsupported VDEV combination */ 5304 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2 5305 5306 /* TODO: please add more comments if you have in-depth information */ 5307 struct wmi_vdev_spectral_conf_cmd { 5308 __le32 vdev_id; 5309 5310 /* number of fft samples to send (0 for infinite) */ 5311 __le32 scan_count; 5312 __le32 scan_period; 5313 __le32 scan_priority; 5314 5315 /* number of bins in the FFT: 2^(fft_size - bin_scale) */ 5316 __le32 scan_fft_size; 5317 __le32 scan_gc_ena; 5318 __le32 scan_restart_ena; 5319 __le32 scan_noise_floor_ref; 5320 __le32 scan_init_delay; 5321 __le32 scan_nb_tone_thr; 5322 __le32 scan_str_bin_thr; 5323 __le32 scan_wb_rpt_mode; 5324 __le32 scan_rssi_rpt_mode; 5325 __le32 scan_rssi_thr; 5326 __le32 scan_pwr_format; 5327 5328 /* rpt_mode: Format of FFT report to software for spectral scan 5329 * triggered FFTs: 5330 * 0: No FFT report (only spectral scan summary report) 5331 * 1: 2-dword summary of metrics for each completed FFT + spectral 5332 * scan summary report 5333 * 2: 2-dword summary of metrics for each completed FFT + 5334 * 1x- oversampled bins(in-band) per FFT + spectral scan summary 5335 * report 5336 * 3: 2-dword summary of metrics for each completed FFT + 5337 * 2x- oversampled bins (all) per FFT + spectral scan summary 5338 */ 5339 __le32 scan_rpt_mode; 5340 __le32 scan_bin_scale; 5341 __le32 scan_dbm_adj; 5342 __le32 scan_chn_mask; 5343 } __packed; 5344 5345 struct wmi_vdev_spectral_conf_arg { 5346 u32 vdev_id; 5347 u32 scan_count; 5348 u32 scan_period; 5349 u32 scan_priority; 5350 u32 scan_fft_size; 5351 u32 scan_gc_ena; 5352 u32 scan_restart_ena; 5353 u32 scan_noise_floor_ref; 5354 u32 scan_init_delay; 5355 u32 scan_nb_tone_thr; 5356 u32 scan_str_bin_thr; 5357 u32 scan_wb_rpt_mode; 5358 u32 scan_rssi_rpt_mode; 5359 u32 scan_rssi_thr; 5360 u32 scan_pwr_format; 5361 u32 scan_rpt_mode; 5362 u32 scan_bin_scale; 5363 u32 scan_dbm_adj; 5364 u32 scan_chn_mask; 5365 }; 5366 5367 #define WMI_SPECTRAL_ENABLE_DEFAULT 0 5368 #define WMI_SPECTRAL_COUNT_DEFAULT 0 5369 #define WMI_SPECTRAL_PERIOD_DEFAULT 35 5370 #define WMI_SPECTRAL_PRIORITY_DEFAULT 1 5371 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7 5372 #define WMI_SPECTRAL_GC_ENA_DEFAULT 1 5373 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0 5374 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96 5375 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80 5376 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12 5377 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8 5378 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0 5379 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0 5380 #define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0 5381 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0 5382 #define WMI_SPECTRAL_RPT_MODE_DEFAULT 2 5383 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1 5384 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1 5385 #define WMI_SPECTRAL_CHN_MASK_DEFAULT 1 5386 5387 struct wmi_vdev_spectral_enable_cmd { 5388 __le32 vdev_id; 5389 __le32 trigger_cmd; 5390 __le32 enable_cmd; 5391 } __packed; 5392 5393 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1 5394 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2 5395 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1 5396 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2 5397 5398 /* Beacon processing related command and event structures */ 5399 struct wmi_bcn_tx_hdr { 5400 __le32 vdev_id; 5401 __le32 tx_rate; 5402 __le32 tx_power; 5403 __le32 bcn_len; 5404 } __packed; 5405 5406 struct wmi_bcn_tx_cmd { 5407 struct wmi_bcn_tx_hdr hdr; 5408 u8 *bcn[0]; 5409 } __packed; 5410 5411 struct wmi_bcn_tx_arg { 5412 u32 vdev_id; 5413 u32 tx_rate; 5414 u32 tx_power; 5415 u32 bcn_len; 5416 const void *bcn; 5417 }; 5418 5419 enum wmi_bcn_tx_ref_flags { 5420 WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1, 5421 WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2, 5422 }; 5423 5424 /* TODO: It is unclear why "no antenna" works while any other seemingly valid 5425 * chainmask yields no beacons on the air at all. 5426 */ 5427 #define WMI_BCN_TX_REF_DEF_ANTENNA 0 5428 5429 struct wmi_bcn_tx_ref_cmd { 5430 __le32 vdev_id; 5431 __le32 data_len; 5432 /* physical address of the frame - dma pointer */ 5433 __le32 data_ptr; 5434 /* id for host to track */ 5435 __le32 msdu_id; 5436 /* frame ctrl to setup PPDU desc */ 5437 __le32 frame_control; 5438 /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */ 5439 __le32 flags; 5440 /* introduced in 10.2 */ 5441 __le32 antenna_mask; 5442 } __packed; 5443 5444 /* Beacon filter */ 5445 #define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */ 5446 #define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */ 5447 #define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */ 5448 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */ 5449 #define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */ 5450 5451 struct wmi_bcn_filter_rx_cmd { 5452 /* Filter ID */ 5453 __le32 bcn_filter_id; 5454 /* Filter type - wmi_bcn_filter */ 5455 __le32 bcn_filter; 5456 /* Buffer len */ 5457 __le32 bcn_filter_len; 5458 /* Filter info (threshold, BSSID, RSSI) */ 5459 u8 *bcn_filter_buf; 5460 } __packed; 5461 5462 /* Capabilities and IEs to be passed to firmware */ 5463 struct wmi_bcn_prb_info { 5464 /* Capabilities */ 5465 __le32 caps; 5466 /* ERP info */ 5467 __le32 erp; 5468 /* Advanced capabilities */ 5469 /* HT capabilities */ 5470 /* HT Info */ 5471 /* ibss_dfs */ 5472 /* wpa Info */ 5473 /* rsn Info */ 5474 /* rrm info */ 5475 /* ath_ext */ 5476 /* app IE */ 5477 } __packed; 5478 5479 struct wmi_bcn_tmpl_cmd { 5480 /* unique id identifying the VDEV, generated by the caller */ 5481 __le32 vdev_id; 5482 /* TIM IE offset from the beginning of the template. */ 5483 __le32 tim_ie_offset; 5484 /* beacon probe capabilities and IEs */ 5485 struct wmi_bcn_prb_info bcn_prb_info; 5486 /* beacon buffer length */ 5487 __le32 buf_len; 5488 /* variable length data */ 5489 u8 data[1]; 5490 } __packed; 5491 5492 struct wmi_prb_tmpl_cmd { 5493 /* unique id identifying the VDEV, generated by the caller */ 5494 __le32 vdev_id; 5495 /* beacon probe capabilities and IEs */ 5496 struct wmi_bcn_prb_info bcn_prb_info; 5497 /* beacon buffer length */ 5498 __le32 buf_len; 5499 /* Variable length data */ 5500 u8 data[1]; 5501 } __packed; 5502 5503 enum wmi_sta_ps_mode { 5504 /* enable power save for the given STA VDEV */ 5505 WMI_STA_PS_MODE_DISABLED = 0, 5506 /* disable power save for a given STA VDEV */ 5507 WMI_STA_PS_MODE_ENABLED = 1, 5508 }; 5509 5510 struct wmi_sta_powersave_mode_cmd { 5511 /* unique id identifying the VDEV, generated by the caller */ 5512 __le32 vdev_id; 5513 5514 /* 5515 * Power save mode 5516 * (see enum wmi_sta_ps_mode) 5517 */ 5518 __le32 sta_ps_mode; 5519 } __packed; 5520 5521 enum wmi_csa_offload_en { 5522 WMI_CSA_OFFLOAD_DISABLE = 0, 5523 WMI_CSA_OFFLOAD_ENABLE = 1, 5524 }; 5525 5526 struct wmi_csa_offload_enable_cmd { 5527 __le32 vdev_id; 5528 __le32 csa_offload_enable; 5529 } __packed; 5530 5531 struct wmi_csa_offload_chanswitch_cmd { 5532 __le32 vdev_id; 5533 struct wmi_channel chan; 5534 } __packed; 5535 5536 /* 5537 * This parameter controls the policy for retrieving frames from AP while the 5538 * STA is in sleep state. 5539 * 5540 * Only takes affect if the sta_ps_mode is enabled 5541 */ 5542 enum wmi_sta_ps_param_rx_wake_policy { 5543 /* 5544 * Wake up when ever there is an RX activity on the VDEV. In this mode 5545 * the Power save SM(state machine) will come out of sleep by either 5546 * sending null frame (or) a data frame (with PS==0) in response to TIM 5547 * bit set in the received beacon frame from AP. 5548 */ 5549 WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0, 5550 5551 /* 5552 * Here the power save state machine will not wakeup in response to TIM 5553 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD 5554 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all 5555 * access categories are delivery-enabled, the station will send a 5556 * UAPSD trigger frame, otherwise it will send a PS-Poll. 5557 */ 5558 WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, 5559 }; 5560 5561 /* 5562 * Number of tx frames/beacon that cause the power save SM to wake up. 5563 * 5564 * Value 1 causes the SM to wake up for every TX. Value 0 has a special 5565 * meaning, It will cause the SM to never wake up. This is useful if you want 5566 * to keep the system to sleep all the time for some kind of test mode . host 5567 * can change this parameter any time. It will affect at the next tx frame. 5568 */ 5569 enum wmi_sta_ps_param_tx_wake_threshold { 5570 WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, 5571 WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, 5572 5573 /* 5574 * Values greater than one indicate that many TX attempts per beacon 5575 * interval before the STA will wake up 5576 */ 5577 }; 5578 5579 /* 5580 * The maximum number of PS-Poll frames the FW will send in response to 5581 * traffic advertised in TIM before waking up (by sending a null frame with PS 5582 * = 0). Value 0 has a special meaning: there is no maximum count and the FW 5583 * will send as many PS-Poll as are necessary to retrieve buffered BU. This 5584 * parameter is used when the RX wake policy is 5585 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake 5586 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE. 5587 */ 5588 enum wmi_sta_ps_param_pspoll_count { 5589 WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0, 5590 /* 5591 * Values greater than 0 indicate the maximum numer of PS-Poll frames 5592 * FW will send before waking up. 5593 */ 5594 5595 /* When u-APSD is enabled the firmware will be very reluctant to exit 5596 * STA PS. This could result in very poor Rx performance with STA doing 5597 * PS-Poll for each and every buffered frame. This value is a bit 5598 * arbitrary. 5599 */ 5600 WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3, 5601 }; 5602 5603 /* 5604 * This will include the delivery and trigger enabled state for every AC. 5605 * This is the negotiated state with AP. The host MLME needs to set this based 5606 * on AP capability and the state Set in the association request by the 5607 * station MLME.Lower 8 bits of the value specify the UAPSD configuration. 5608 */ 5609 #define WMI_UAPSD_AC_TYPE_DELI 0 5610 #define WMI_UAPSD_AC_TYPE_TRIG 1 5611 5612 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \ 5613 (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1)) 5614 5615 enum wmi_sta_ps_param_uapsd { 5616 WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5617 WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5618 WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5619 WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5620 WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5621 WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5622 WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5623 WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5624 }; 5625 5626 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX 5627 5628 struct wmi_sta_uapsd_auto_trig_param { 5629 __le32 wmm_ac; 5630 __le32 user_priority; 5631 __le32 service_interval; 5632 __le32 suspend_interval; 5633 __le32 delay_interval; 5634 }; 5635 5636 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param { 5637 __le32 vdev_id; 5638 struct wmi_mac_addr peer_macaddr; 5639 __le32 num_ac; 5640 }; 5641 5642 struct wmi_sta_uapsd_auto_trig_arg { 5643 u32 wmm_ac; 5644 u32 user_priority; 5645 u32 service_interval; 5646 u32 suspend_interval; 5647 u32 delay_interval; 5648 }; 5649 5650 enum wmi_sta_powersave_param { 5651 /* 5652 * Controls how frames are retrievd from AP while STA is sleeping 5653 * 5654 * (see enum wmi_sta_ps_param_rx_wake_policy) 5655 */ 5656 WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0, 5657 5658 /* 5659 * The STA will go active after this many TX 5660 * 5661 * (see enum wmi_sta_ps_param_tx_wake_threshold) 5662 */ 5663 WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, 5664 5665 /* 5666 * Number of PS-Poll to send before STA wakes up 5667 * 5668 * (see enum wmi_sta_ps_param_pspoll_count) 5669 * 5670 */ 5671 WMI_STA_PS_PARAM_PSPOLL_COUNT = 2, 5672 5673 /* 5674 * TX/RX inactivity time in msec before going to sleep. 5675 * 5676 * The power save SM will monitor tx/rx activity on the VDEV, if no 5677 * activity for the specified msec of the parameter the Power save 5678 * SM will go to sleep. 5679 */ 5680 WMI_STA_PS_PARAM_INACTIVITY_TIME = 3, 5681 5682 /* 5683 * Set uapsd configuration. 5684 * 5685 * (see enum wmi_sta_ps_param_uapsd) 5686 */ 5687 WMI_STA_PS_PARAM_UAPSD = 4, 5688 }; 5689 5690 struct wmi_sta_powersave_param_cmd { 5691 __le32 vdev_id; 5692 __le32 param_id; /* %WMI_STA_PS_PARAM_ */ 5693 __le32 param_value; 5694 } __packed; 5695 5696 /* No MIMO power save */ 5697 #define WMI_STA_MIMO_PS_MODE_DISABLE 5698 /* mimo powersave mode static*/ 5699 #define WMI_STA_MIMO_PS_MODE_STATIC 5700 /* mimo powersave mode dynamic */ 5701 #define WMI_STA_MIMO_PS_MODE_DYNAMIC 5702 5703 struct wmi_sta_mimo_ps_mode_cmd { 5704 /* unique id identifying the VDEV, generated by the caller */ 5705 __le32 vdev_id; 5706 /* mimo powersave mode as defined above */ 5707 __le32 mimo_pwrsave_mode; 5708 } __packed; 5709 5710 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */ 5711 enum wmi_ap_ps_param_uapsd { 5712 WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5713 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5714 WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5715 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5716 WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5717 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5718 WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5719 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5720 }; 5721 5722 /* U-APSD maximum service period of peer station */ 5723 enum wmi_ap_ps_peer_param_max_sp { 5724 WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, 5725 WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1, 5726 WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2, 5727 WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3, 5728 MAX_WMI_AP_PS_PEER_PARAM_MAX_SP, 5729 }; 5730 5731 /* 5732 * AP power save parameter 5733 * Set a power save specific parameter for a peer station 5734 */ 5735 enum wmi_ap_ps_peer_param { 5736 /* Set uapsd configuration for a given peer. 5737 * 5738 * Include the delivery and trigger enabled state for every AC. 5739 * The host MLME needs to set this based on AP capability and stations 5740 * request Set in the association request received from the station. 5741 * 5742 * Lower 8 bits of the value specify the UAPSD configuration. 5743 * 5744 * (see enum wmi_ap_ps_param_uapsd) 5745 * The default value is 0. 5746 */ 5747 WMI_AP_PS_PEER_PARAM_UAPSD = 0, 5748 5749 /* 5750 * Set the service period for a UAPSD capable station 5751 * 5752 * The service period from wme ie in the (re)assoc request frame. 5753 * 5754 * (see enum wmi_ap_ps_peer_param_max_sp) 5755 */ 5756 WMI_AP_PS_PEER_PARAM_MAX_SP = 1, 5757 5758 /* Time in seconds for aging out buffered frames for STA in PS */ 5759 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, 5760 }; 5761 5762 struct wmi_ap_ps_peer_cmd { 5763 /* unique id identifying the VDEV, generated by the caller */ 5764 __le32 vdev_id; 5765 5766 /* peer MAC address */ 5767 struct wmi_mac_addr peer_macaddr; 5768 5769 /* AP powersave param (see enum wmi_ap_ps_peer_param) */ 5770 __le32 param_id; 5771 5772 /* AP powersave param value */ 5773 __le32 param_value; 5774 } __packed; 5775 5776 /* 128 clients = 4 words */ 5777 #define WMI_TIM_BITMAP_ARRAY_SIZE 4 5778 5779 struct wmi_tim_info { 5780 __le32 tim_len; 5781 __le32 tim_mcast; 5782 __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE]; 5783 __le32 tim_changed; 5784 __le32 tim_num_ps_pending; 5785 } __packed; 5786 5787 struct wmi_tim_info_arg { 5788 __le32 tim_len; 5789 __le32 tim_mcast; 5790 const __le32 *tim_bitmap; 5791 __le32 tim_changed; 5792 __le32 tim_num_ps_pending; 5793 } __packed; 5794 5795 /* Maximum number of NOA Descriptors supported */ 5796 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4 5797 #define WMI_P2P_OPPPS_ENABLE_BIT BIT(0) 5798 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1 5799 #define WMI_P2P_NOA_CHANGED_BIT BIT(0) 5800 5801 struct wmi_p2p_noa_info { 5802 /* Bit 0 - Flag to indicate an update in NOA schedule 5803 * Bits 7-1 - Reserved 5804 */ 5805 u8 changed; 5806 /* NOA index */ 5807 u8 index; 5808 /* Bit 0 - Opp PS state of the AP 5809 * Bits 1-7 - Ctwindow in TUs 5810 */ 5811 u8 ctwindow_oppps; 5812 /* Number of NOA descriptors */ 5813 u8 num_descriptors; 5814 5815 struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS]; 5816 } __packed; 5817 5818 struct wmi_bcn_info { 5819 struct wmi_tim_info tim_info; 5820 struct wmi_p2p_noa_info p2p_noa_info; 5821 } __packed; 5822 5823 struct wmi_host_swba_event { 5824 __le32 vdev_map; 5825 struct wmi_bcn_info bcn_info[0]; 5826 } __packed; 5827 5828 struct wmi_10_2_4_bcn_info { 5829 struct wmi_tim_info tim_info; 5830 /* The 10.2.4 FW doesn't have p2p NOA info */ 5831 } __packed; 5832 5833 struct wmi_10_2_4_host_swba_event { 5834 __le32 vdev_map; 5835 struct wmi_10_2_4_bcn_info bcn_info[0]; 5836 } __packed; 5837 5838 /* 16 words = 512 client + 1 word = for guard */ 5839 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17 5840 5841 struct wmi_10_4_tim_info { 5842 __le32 tim_len; 5843 __le32 tim_mcast; 5844 __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE]; 5845 __le32 tim_changed; 5846 __le32 tim_num_ps_pending; 5847 } __packed; 5848 5849 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1 5850 5851 struct wmi_10_4_p2p_noa_info { 5852 /* Bit 0 - Flag to indicate an update in NOA schedule 5853 * Bits 7-1 - Reserved 5854 */ 5855 u8 changed; 5856 /* NOA index */ 5857 u8 index; 5858 /* Bit 0 - Opp PS state of the AP 5859 * Bits 1-7 - Ctwindow in TUs 5860 */ 5861 u8 ctwindow_oppps; 5862 /* Number of NOA descriptors */ 5863 u8 num_descriptors; 5864 5865 struct wmi_p2p_noa_descriptor 5866 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS]; 5867 } __packed; 5868 5869 struct wmi_10_4_bcn_info { 5870 struct wmi_10_4_tim_info tim_info; 5871 struct wmi_10_4_p2p_noa_info p2p_noa_info; 5872 } __packed; 5873 5874 struct wmi_10_4_host_swba_event { 5875 __le32 vdev_map; 5876 struct wmi_10_4_bcn_info bcn_info[0]; 5877 } __packed; 5878 5879 #define WMI_MAX_AP_VDEV 16 5880 5881 struct wmi_tbtt_offset_event { 5882 __le32 vdev_map; 5883 __le32 tbttoffset_list[WMI_MAX_AP_VDEV]; 5884 } __packed; 5885 5886 struct wmi_peer_create_cmd { 5887 __le32 vdev_id; 5888 struct wmi_mac_addr peer_macaddr; 5889 __le32 peer_type; 5890 } __packed; 5891 5892 enum wmi_peer_type { 5893 WMI_PEER_TYPE_DEFAULT = 0, 5894 WMI_PEER_TYPE_BSS = 1, 5895 WMI_PEER_TYPE_TDLS = 2, 5896 }; 5897 5898 struct wmi_peer_delete_cmd { 5899 __le32 vdev_id; 5900 struct wmi_mac_addr peer_macaddr; 5901 } __packed; 5902 5903 struct wmi_peer_flush_tids_cmd { 5904 __le32 vdev_id; 5905 struct wmi_mac_addr peer_macaddr; 5906 __le32 peer_tid_bitmap; 5907 } __packed; 5908 5909 struct wmi_fixed_rate { 5910 /* 5911 * rate mode . 0: disable fixed rate (auto rate) 5912 * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps 5913 * 2: ht20 11n rate specified as mcs index 5914 * 3: ht40 11n rate specified as mcs index 5915 */ 5916 __le32 rate_mode; 5917 /* 5918 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB) 5919 * and series 3 is stored at byte 3 (MSB) 5920 */ 5921 __le32 rate_series; 5922 /* 5923 * 4 retry counts for 4 rate series. retry count for rate 0 is stored 5924 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3 5925 * (MSB) 5926 */ 5927 __le32 rate_retries; 5928 } __packed; 5929 5930 struct wmi_peer_fixed_rate_cmd { 5931 /* unique id identifying the VDEV, generated by the caller */ 5932 __le32 vdev_id; 5933 /* peer MAC address */ 5934 struct wmi_mac_addr peer_macaddr; 5935 /* fixed rate */ 5936 struct wmi_fixed_rate peer_fixed_rate; 5937 } __packed; 5938 5939 #define WMI_MGMT_TID 17 5940 5941 struct wmi_addba_clear_resp_cmd { 5942 /* unique id identifying the VDEV, generated by the caller */ 5943 __le32 vdev_id; 5944 /* peer MAC address */ 5945 struct wmi_mac_addr peer_macaddr; 5946 } __packed; 5947 5948 struct wmi_addba_send_cmd { 5949 /* unique id identifying the VDEV, generated by the caller */ 5950 __le32 vdev_id; 5951 /* peer MAC address */ 5952 struct wmi_mac_addr peer_macaddr; 5953 /* Tid number */ 5954 __le32 tid; 5955 /* Buffer/Window size*/ 5956 __le32 buffersize; 5957 } __packed; 5958 5959 struct wmi_delba_send_cmd { 5960 /* unique id identifying the VDEV, generated by the caller */ 5961 __le32 vdev_id; 5962 /* peer MAC address */ 5963 struct wmi_mac_addr peer_macaddr; 5964 /* Tid number */ 5965 __le32 tid; 5966 /* Is Initiator */ 5967 __le32 initiator; 5968 /* Reason code */ 5969 __le32 reasoncode; 5970 } __packed; 5971 5972 struct wmi_addba_setresponse_cmd { 5973 /* unique id identifying the vdev, generated by the caller */ 5974 __le32 vdev_id; 5975 /* peer mac address */ 5976 struct wmi_mac_addr peer_macaddr; 5977 /* Tid number */ 5978 __le32 tid; 5979 /* status code */ 5980 __le32 statuscode; 5981 } __packed; 5982 5983 struct wmi_send_singleamsdu_cmd { 5984 /* unique id identifying the vdev, generated by the caller */ 5985 __le32 vdev_id; 5986 /* peer mac address */ 5987 struct wmi_mac_addr peer_macaddr; 5988 /* Tid number */ 5989 __le32 tid; 5990 } __packed; 5991 5992 enum wmi_peer_smps_state { 5993 WMI_PEER_SMPS_PS_NONE = 0x0, 5994 WMI_PEER_SMPS_STATIC = 0x1, 5995 WMI_PEER_SMPS_DYNAMIC = 0x2 5996 }; 5997 5998 enum wmi_peer_chwidth { 5999 WMI_PEER_CHWIDTH_20MHZ = 0, 6000 WMI_PEER_CHWIDTH_40MHZ = 1, 6001 WMI_PEER_CHWIDTH_80MHZ = 2, 6002 WMI_PEER_CHWIDTH_160MHZ = 3, 6003 }; 6004 6005 enum wmi_peer_param { 6006 WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */ 6007 WMI_PEER_AMPDU = 0x2, 6008 WMI_PEER_AUTHORIZE = 0x3, 6009 WMI_PEER_CHAN_WIDTH = 0x4, 6010 WMI_PEER_NSS = 0x5, 6011 WMI_PEER_USE_4ADDR = 0x6, 6012 WMI_PEER_DEBUG = 0xa, 6013 WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */ 6014 }; 6015 6016 struct wmi_peer_set_param_cmd { 6017 __le32 vdev_id; 6018 struct wmi_mac_addr peer_macaddr; 6019 __le32 param_id; 6020 __le32 param_value; 6021 } __packed; 6022 6023 #define MAX_SUPPORTED_RATES 128 6024 6025 struct wmi_rate_set { 6026 /* total number of rates */ 6027 __le32 num_rates; 6028 /* 6029 * rates (each 8bit value) packed into a 32 bit word. 6030 * the rates are filled from least significant byte to most 6031 * significant byte. 6032 */ 6033 __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1]; 6034 } __packed; 6035 6036 struct wmi_rate_set_arg { 6037 unsigned int num_rates; 6038 u8 rates[MAX_SUPPORTED_RATES]; 6039 }; 6040 6041 /* 6042 * NOTE: It would bea good idea to represent the Tx MCS 6043 * info in one word and Rx in another word. This is split 6044 * into multiple words for convenience 6045 */ 6046 struct wmi_vht_rate_set { 6047 __le32 rx_max_rate; /* Max Rx data rate */ 6048 __le32 rx_mcs_set; /* Negotiated RX VHT rates */ 6049 __le32 tx_max_rate; /* Max Tx data rate */ 6050 __le32 tx_mcs_set; /* Negotiated TX VHT rates */ 6051 } __packed; 6052 6053 struct wmi_vht_rate_set_arg { 6054 u32 rx_max_rate; 6055 u32 rx_mcs_set; 6056 u32 tx_max_rate; 6057 u32 tx_mcs_set; 6058 }; 6059 6060 struct wmi_peer_set_rates_cmd { 6061 /* peer MAC address */ 6062 struct wmi_mac_addr peer_macaddr; 6063 /* legacy rate set */ 6064 struct wmi_rate_set peer_legacy_rates; 6065 /* ht rate set */ 6066 struct wmi_rate_set peer_ht_rates; 6067 } __packed; 6068 6069 struct wmi_peer_set_q_empty_callback_cmd { 6070 /* unique id identifying the VDEV, generated by the caller */ 6071 __le32 vdev_id; 6072 /* peer MAC address */ 6073 struct wmi_mac_addr peer_macaddr; 6074 __le32 callback_enable; 6075 } __packed; 6076 6077 struct wmi_peer_flags_map { 6078 u32 auth; 6079 u32 qos; 6080 u32 need_ptk_4_way; 6081 u32 need_gtk_2_way; 6082 u32 apsd; 6083 u32 ht; 6084 u32 bw40; 6085 u32 stbc; 6086 u32 ldbc; 6087 u32 dyn_mimops; 6088 u32 static_mimops; 6089 u32 spatial_mux; 6090 u32 vht; 6091 u32 bw80; 6092 u32 vht_2g; 6093 u32 pmf; 6094 u32 bw160; 6095 }; 6096 6097 enum wmi_peer_flags { 6098 WMI_PEER_AUTH = 0x00000001, 6099 WMI_PEER_QOS = 0x00000002, 6100 WMI_PEER_NEED_PTK_4_WAY = 0x00000004, 6101 WMI_PEER_NEED_GTK_2_WAY = 0x00000010, 6102 WMI_PEER_APSD = 0x00000800, 6103 WMI_PEER_HT = 0x00001000, 6104 WMI_PEER_40MHZ = 0x00002000, 6105 WMI_PEER_STBC = 0x00008000, 6106 WMI_PEER_LDPC = 0x00010000, 6107 WMI_PEER_DYN_MIMOPS = 0x00020000, 6108 WMI_PEER_STATIC_MIMOPS = 0x00040000, 6109 WMI_PEER_SPATIAL_MUX = 0x00200000, 6110 WMI_PEER_VHT = 0x02000000, 6111 WMI_PEER_80MHZ = 0x04000000, 6112 WMI_PEER_VHT_2G = 0x08000000, 6113 WMI_PEER_PMF = 0x10000000, 6114 WMI_PEER_160MHZ = 0x20000000 6115 }; 6116 6117 enum wmi_10x_peer_flags { 6118 WMI_10X_PEER_AUTH = 0x00000001, 6119 WMI_10X_PEER_QOS = 0x00000002, 6120 WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004, 6121 WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010, 6122 WMI_10X_PEER_APSD = 0x00000800, 6123 WMI_10X_PEER_HT = 0x00001000, 6124 WMI_10X_PEER_40MHZ = 0x00002000, 6125 WMI_10X_PEER_STBC = 0x00008000, 6126 WMI_10X_PEER_LDPC = 0x00010000, 6127 WMI_10X_PEER_DYN_MIMOPS = 0x00020000, 6128 WMI_10X_PEER_STATIC_MIMOPS = 0x00040000, 6129 WMI_10X_PEER_SPATIAL_MUX = 0x00200000, 6130 WMI_10X_PEER_VHT = 0x02000000, 6131 WMI_10X_PEER_80MHZ = 0x04000000, 6132 WMI_10X_PEER_160MHZ = 0x20000000 6133 }; 6134 6135 enum wmi_10_2_peer_flags { 6136 WMI_10_2_PEER_AUTH = 0x00000001, 6137 WMI_10_2_PEER_QOS = 0x00000002, 6138 WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004, 6139 WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010, 6140 WMI_10_2_PEER_APSD = 0x00000800, 6141 WMI_10_2_PEER_HT = 0x00001000, 6142 WMI_10_2_PEER_40MHZ = 0x00002000, 6143 WMI_10_2_PEER_STBC = 0x00008000, 6144 WMI_10_2_PEER_LDPC = 0x00010000, 6145 WMI_10_2_PEER_DYN_MIMOPS = 0x00020000, 6146 WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000, 6147 WMI_10_2_PEER_SPATIAL_MUX = 0x00200000, 6148 WMI_10_2_PEER_VHT = 0x02000000, 6149 WMI_10_2_PEER_80MHZ = 0x04000000, 6150 WMI_10_2_PEER_VHT_2G = 0x08000000, 6151 WMI_10_2_PEER_PMF = 0x10000000, 6152 WMI_10_2_PEER_160MHZ = 0x20000000 6153 }; 6154 6155 /* 6156 * Peer rate capabilities. 6157 * 6158 * This is of interest to the ratecontrol 6159 * module which resides in the firmware. The bit definitions are 6160 * consistent with that defined in if_athrate.c. 6161 */ 6162 #define WMI_RC_DS_FLAG 0x01 6163 #define WMI_RC_CW40_FLAG 0x02 6164 #define WMI_RC_SGI_FLAG 0x04 6165 #define WMI_RC_HT_FLAG 0x08 6166 #define WMI_RC_RTSCTS_FLAG 0x10 6167 #define WMI_RC_TX_STBC_FLAG 0x20 6168 #define WMI_RC_RX_STBC_FLAG 0xC0 6169 #define WMI_RC_RX_STBC_FLAG_S 6 6170 #define WMI_RC_WEP_TKIP_FLAG 0x100 6171 #define WMI_RC_TS_FLAG 0x200 6172 #define WMI_RC_UAPSD_FLAG 0x400 6173 6174 /* Maximum listen interval supported by hw in units of beacon interval */ 6175 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5 6176 6177 struct wmi_common_peer_assoc_complete_cmd { 6178 struct wmi_mac_addr peer_macaddr; 6179 __le32 vdev_id; 6180 __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */ 6181 __le32 peer_associd; /* 16 LSBs */ 6182 __le32 peer_flags; 6183 __le32 peer_caps; /* 16 LSBs */ 6184 __le32 peer_listen_intval; 6185 __le32 peer_ht_caps; 6186 __le32 peer_max_mpdu; 6187 __le32 peer_mpdu_density; /* 0..16 */ 6188 __le32 peer_rate_caps; 6189 struct wmi_rate_set peer_legacy_rates; 6190 struct wmi_rate_set peer_ht_rates; 6191 __le32 peer_nss; /* num of spatial streams */ 6192 __le32 peer_vht_caps; 6193 __le32 peer_phymode; 6194 struct wmi_vht_rate_set peer_vht_rates; 6195 }; 6196 6197 struct wmi_main_peer_assoc_complete_cmd { 6198 struct wmi_common_peer_assoc_complete_cmd cmd; 6199 6200 /* HT Operation Element of the peer. Five bytes packed in 2 6201 * INT32 array and filled from lsb to msb. 6202 */ 6203 __le32 peer_ht_info[2]; 6204 } __packed; 6205 6206 struct wmi_10_1_peer_assoc_complete_cmd { 6207 struct wmi_common_peer_assoc_complete_cmd cmd; 6208 } __packed; 6209 6210 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0 6211 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f 6212 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4 6213 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0 6214 6215 struct wmi_10_2_peer_assoc_complete_cmd { 6216 struct wmi_common_peer_assoc_complete_cmd cmd; 6217 __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */ 6218 } __packed; 6219 6220 #define PEER_BW_RXNSS_OVERRIDE_OFFSET 31 6221 6222 struct wmi_10_4_peer_assoc_complete_cmd { 6223 struct wmi_10_2_peer_assoc_complete_cmd cmd; 6224 __le32 peer_bw_rxnss_override; 6225 } __packed; 6226 6227 struct wmi_peer_assoc_complete_arg { 6228 u8 addr[ETH_ALEN]; 6229 u32 vdev_id; 6230 bool peer_reassoc; 6231 u16 peer_aid; 6232 u32 peer_flags; /* see %WMI_PEER_ */ 6233 u16 peer_caps; 6234 u32 peer_listen_intval; 6235 u32 peer_ht_caps; 6236 u32 peer_max_mpdu; 6237 u32 peer_mpdu_density; /* 0..16 */ 6238 u32 peer_rate_caps; /* see %WMI_RC_ */ 6239 struct wmi_rate_set_arg peer_legacy_rates; 6240 struct wmi_rate_set_arg peer_ht_rates; 6241 u32 peer_num_spatial_streams; 6242 u32 peer_vht_caps; 6243 enum wmi_phy_mode peer_phymode; 6244 struct wmi_vht_rate_set_arg peer_vht_rates; 6245 u32 peer_bw_rxnss_override; 6246 }; 6247 6248 struct wmi_peer_add_wds_entry_cmd { 6249 /* peer MAC address */ 6250 struct wmi_mac_addr peer_macaddr; 6251 /* wds MAC addr */ 6252 struct wmi_mac_addr wds_macaddr; 6253 } __packed; 6254 6255 struct wmi_peer_remove_wds_entry_cmd { 6256 /* wds MAC addr */ 6257 struct wmi_mac_addr wds_macaddr; 6258 } __packed; 6259 6260 struct wmi_peer_q_empty_callback_event { 6261 /* peer MAC address */ 6262 struct wmi_mac_addr peer_macaddr; 6263 } __packed; 6264 6265 /* 6266 * Channel info WMI event 6267 */ 6268 struct wmi_chan_info_event { 6269 __le32 err_code; 6270 __le32 freq; 6271 __le32 cmd_flags; 6272 __le32 noise_floor; 6273 __le32 rx_clear_count; 6274 __le32 cycle_count; 6275 } __packed; 6276 6277 struct wmi_10_4_chan_info_event { 6278 __le32 err_code; 6279 __le32 freq; 6280 __le32 cmd_flags; 6281 __le32 noise_floor; 6282 __le32 rx_clear_count; 6283 __le32 cycle_count; 6284 __le32 chan_tx_pwr_range; 6285 __le32 chan_tx_pwr_tp; 6286 __le32 rx_frame_count; 6287 } __packed; 6288 6289 struct wmi_peer_sta_kickout_event { 6290 struct wmi_mac_addr peer_macaddr; 6291 } __packed; 6292 6293 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0) 6294 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1) 6295 6296 /* Beacon filter wmi command info */ 6297 #define BCN_FLT_MAX_SUPPORTED_IES 256 6298 #define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32) 6299 6300 struct bss_bcn_stats { 6301 __le32 vdev_id; 6302 __le32 bss_bcnsdropped; 6303 __le32 bss_bcnsdelivered; 6304 } __packed; 6305 6306 struct bcn_filter_stats { 6307 __le32 bcns_dropped; 6308 __le32 bcns_delivered; 6309 __le32 activefilters; 6310 struct bss_bcn_stats bss_stats; 6311 } __packed; 6312 6313 struct wmi_add_bcn_filter_cmd { 6314 u32 vdev_id; 6315 u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST]; 6316 } __packed; 6317 6318 enum wmi_sta_keepalive_method { 6319 WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1, 6320 WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2, 6321 }; 6322 6323 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0 6324 6325 /* Firmware crashes if keepalive interval exceeds this limit */ 6326 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff 6327 6328 /* note: ip4 addresses are in network byte order, i.e. big endian */ 6329 struct wmi_sta_keepalive_arp_resp { 6330 __be32 src_ip4_addr; 6331 __be32 dest_ip4_addr; 6332 struct wmi_mac_addr dest_mac_addr; 6333 } __packed; 6334 6335 struct wmi_sta_keepalive_cmd { 6336 __le32 vdev_id; 6337 __le32 enabled; 6338 __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */ 6339 __le32 interval; /* in seconds */ 6340 struct wmi_sta_keepalive_arp_resp arp_resp; 6341 } __packed; 6342 6343 struct wmi_sta_keepalive_arg { 6344 u32 vdev_id; 6345 u32 enabled; 6346 u32 method; 6347 u32 interval; 6348 __be32 src_ip4_addr; 6349 __be32 dest_ip4_addr; 6350 const u8 dest_mac_addr[ETH_ALEN]; 6351 }; 6352 6353 enum wmi_force_fw_hang_type { 6354 WMI_FORCE_FW_HANG_ASSERT = 1, 6355 WMI_FORCE_FW_HANG_NO_DETECT, 6356 WMI_FORCE_FW_HANG_CTRL_EP_FULL, 6357 WMI_FORCE_FW_HANG_EMPTY_POINT, 6358 WMI_FORCE_FW_HANG_STACK_OVERFLOW, 6359 WMI_FORCE_FW_HANG_INFINITE_LOOP, 6360 }; 6361 6362 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF 6363 6364 struct wmi_force_fw_hang_cmd { 6365 __le32 type; 6366 __le32 delay_ms; 6367 } __packed; 6368 6369 enum ath10k_dbglog_level { 6370 ATH10K_DBGLOG_LEVEL_VERBOSE = 0, 6371 ATH10K_DBGLOG_LEVEL_INFO = 1, 6372 ATH10K_DBGLOG_LEVEL_WARN = 2, 6373 ATH10K_DBGLOG_LEVEL_ERR = 3, 6374 }; 6375 6376 /* VAP ids to enable dbglog */ 6377 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0 6378 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff 6379 6380 /* to enable dbglog in the firmware */ 6381 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16 6382 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000 6383 6384 /* timestamp resolution */ 6385 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17 6386 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000 6387 6388 /* number of queued messages before sending them to the host */ 6389 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20 6390 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000 6391 6392 /* 6393 * Log levels to enable. This defines the minimum level to enable, this is 6394 * not a bitmask. See enum ath10k_dbglog_level for the values. 6395 */ 6396 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28 6397 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000 6398 6399 /* 6400 * Note: this is a cleaned up version of a struct firmware uses. For 6401 * example, config_valid was hidden inside an array. 6402 */ 6403 struct wmi_dbglog_cfg_cmd { 6404 /* bitmask to hold mod id config*/ 6405 __le32 module_enable; 6406 6407 /* see ATH10K_DBGLOG_CFG_ */ 6408 __le32 config_enable; 6409 6410 /* mask of module id bits to be changed */ 6411 __le32 module_valid; 6412 6413 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6414 __le32 config_valid; 6415 } __packed; 6416 6417 struct wmi_10_4_dbglog_cfg_cmd { 6418 /* bitmask to hold mod id config*/ 6419 __le64 module_enable; 6420 6421 /* see ATH10K_DBGLOG_CFG_ */ 6422 __le32 config_enable; 6423 6424 /* mask of module id bits to be changed */ 6425 __le64 module_valid; 6426 6427 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6428 __le32 config_valid; 6429 } __packed; 6430 6431 enum wmi_roam_reason { 6432 WMI_ROAM_REASON_BETTER_AP = 1, 6433 WMI_ROAM_REASON_BEACON_MISS = 2, 6434 WMI_ROAM_REASON_LOW_RSSI = 3, 6435 WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4, 6436 WMI_ROAM_REASON_HO_FAILED = 5, 6437 6438 /* keep last */ 6439 WMI_ROAM_REASON_MAX, 6440 }; 6441 6442 struct wmi_roam_ev { 6443 __le32 vdev_id; 6444 __le32 reason; 6445 } __packed; 6446 6447 #define ATH10K_FRAGMT_THRESHOLD_MIN 540 6448 #define ATH10K_FRAGMT_THRESHOLD_MAX 2346 6449 6450 #define WMI_MAX_EVENT 0x1000 6451 /* Maximum number of pending TXed WMI packets */ 6452 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr) 6453 6454 /* By default disable power save for IBSS */ 6455 #define ATH10K_DEFAULT_ATIM 0 6456 6457 #define WMI_MAX_MEM_REQS 16 6458 6459 struct wmi_scan_ev_arg { 6460 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 6461 __le32 reason; /* %WMI_SCAN_REASON_ */ 6462 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 6463 __le32 scan_req_id; 6464 __le32 scan_id; 6465 __le32 vdev_id; 6466 }; 6467 6468 struct wmi_mgmt_rx_ev_arg { 6469 __le32 channel; 6470 __le32 snr; 6471 __le32 rate; 6472 __le32 phy_mode; 6473 __le32 buf_len; 6474 __le32 status; /* %WMI_RX_STATUS_ */ 6475 struct wmi_mgmt_rx_ext_info ext_info; 6476 }; 6477 6478 struct wmi_ch_info_ev_arg { 6479 __le32 err_code; 6480 __le32 freq; 6481 __le32 cmd_flags; 6482 __le32 noise_floor; 6483 __le32 rx_clear_count; 6484 __le32 cycle_count; 6485 __le32 chan_tx_pwr_range; 6486 __le32 chan_tx_pwr_tp; 6487 __le32 rx_frame_count; 6488 }; 6489 6490 struct wmi_vdev_start_ev_arg { 6491 __le32 vdev_id; 6492 __le32 req_id; 6493 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 6494 __le32 status; 6495 }; 6496 6497 struct wmi_peer_kick_ev_arg { 6498 const u8 *mac_addr; 6499 }; 6500 6501 struct wmi_swba_ev_arg { 6502 __le32 vdev_map; 6503 struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV]; 6504 const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV]; 6505 }; 6506 6507 struct wmi_phyerr_ev_arg { 6508 u32 tsf_timestamp; 6509 u16 freq1; 6510 u16 freq2; 6511 u8 rssi_combined; 6512 u8 chan_width_mhz; 6513 u8 phy_err_code; 6514 u16 nf_chains[4]; 6515 u32 buf_len; 6516 const u8 *buf; 6517 u8 hdr_len; 6518 }; 6519 6520 struct wmi_phyerr_hdr_arg { 6521 u32 num_phyerrs; 6522 u32 tsf_l32; 6523 u32 tsf_u32; 6524 u32 buf_len; 6525 const void *phyerrs; 6526 }; 6527 6528 struct wmi_svc_rdy_ev_arg { 6529 __le32 min_tx_power; 6530 __le32 max_tx_power; 6531 __le32 ht_cap; 6532 __le32 vht_cap; 6533 __le32 sw_ver0; 6534 __le32 sw_ver1; 6535 __le32 fw_build; 6536 __le32 phy_capab; 6537 __le32 num_rf_chains; 6538 __le32 eeprom_rd; 6539 __le32 num_mem_reqs; 6540 __le32 low_5ghz_chan; 6541 __le32 high_5ghz_chan; 6542 const __le32 *service_map; 6543 size_t service_map_len; 6544 const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS]; 6545 }; 6546 6547 struct wmi_rdy_ev_arg { 6548 __le32 sw_version; 6549 __le32 abi_version; 6550 __le32 status; 6551 const u8 *mac_addr; 6552 }; 6553 6554 struct wmi_roam_ev_arg { 6555 __le32 vdev_id; 6556 __le32 reason; 6557 __le32 rssi; 6558 }; 6559 6560 struct wmi_echo_ev_arg { 6561 __le32 value; 6562 }; 6563 6564 struct wmi_pdev_temperature_event { 6565 /* temperature value in Celcius degree */ 6566 __le32 temperature; 6567 } __packed; 6568 6569 struct wmi_pdev_bss_chan_info_event { 6570 __le32 freq; 6571 __le32 noise_floor; 6572 __le64 cycle_busy; 6573 __le64 cycle_total; 6574 __le64 cycle_tx; 6575 __le64 cycle_rx; 6576 __le64 cycle_rx_bss; 6577 __le32 reserved; 6578 } __packed; 6579 6580 /* WOW structures */ 6581 enum wmi_wow_wakeup_event { 6582 WOW_BMISS_EVENT = 0, 6583 WOW_BETTER_AP_EVENT, 6584 WOW_DEAUTH_RECVD_EVENT, 6585 WOW_MAGIC_PKT_RECVD_EVENT, 6586 WOW_GTK_ERR_EVENT, 6587 WOW_FOURWAY_HSHAKE_EVENT, 6588 WOW_EAPOL_RECVD_EVENT, 6589 WOW_NLO_DETECTED_EVENT, 6590 WOW_DISASSOC_RECVD_EVENT, 6591 WOW_PATTERN_MATCH_EVENT, 6592 WOW_CSA_IE_EVENT, 6593 WOW_PROBE_REQ_WPS_IE_EVENT, 6594 WOW_AUTH_REQ_EVENT, 6595 WOW_ASSOC_REQ_EVENT, 6596 WOW_HTT_EVENT, 6597 WOW_RA_MATCH_EVENT, 6598 WOW_HOST_AUTO_SHUTDOWN_EVENT, 6599 WOW_IOAC_MAGIC_EVENT, 6600 WOW_IOAC_SHORT_EVENT, 6601 WOW_IOAC_EXTEND_EVENT, 6602 WOW_IOAC_TIMER_EVENT, 6603 WOW_DFS_PHYERR_RADAR_EVENT, 6604 WOW_BEACON_EVENT, 6605 WOW_CLIENT_KICKOUT_EVENT, 6606 WOW_EVENT_MAX, 6607 }; 6608 6609 #define C2S(x) case x: return #x 6610 6611 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev) 6612 { 6613 switch (ev) { 6614 C2S(WOW_BMISS_EVENT); 6615 C2S(WOW_BETTER_AP_EVENT); 6616 C2S(WOW_DEAUTH_RECVD_EVENT); 6617 C2S(WOW_MAGIC_PKT_RECVD_EVENT); 6618 C2S(WOW_GTK_ERR_EVENT); 6619 C2S(WOW_FOURWAY_HSHAKE_EVENT); 6620 C2S(WOW_EAPOL_RECVD_EVENT); 6621 C2S(WOW_NLO_DETECTED_EVENT); 6622 C2S(WOW_DISASSOC_RECVD_EVENT); 6623 C2S(WOW_PATTERN_MATCH_EVENT); 6624 C2S(WOW_CSA_IE_EVENT); 6625 C2S(WOW_PROBE_REQ_WPS_IE_EVENT); 6626 C2S(WOW_AUTH_REQ_EVENT); 6627 C2S(WOW_ASSOC_REQ_EVENT); 6628 C2S(WOW_HTT_EVENT); 6629 C2S(WOW_RA_MATCH_EVENT); 6630 C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT); 6631 C2S(WOW_IOAC_MAGIC_EVENT); 6632 C2S(WOW_IOAC_SHORT_EVENT); 6633 C2S(WOW_IOAC_EXTEND_EVENT); 6634 C2S(WOW_IOAC_TIMER_EVENT); 6635 C2S(WOW_DFS_PHYERR_RADAR_EVENT); 6636 C2S(WOW_BEACON_EVENT); 6637 C2S(WOW_CLIENT_KICKOUT_EVENT); 6638 C2S(WOW_EVENT_MAX); 6639 default: 6640 return NULL; 6641 } 6642 } 6643 6644 enum wmi_wow_wake_reason { 6645 WOW_REASON_UNSPECIFIED = -1, 6646 WOW_REASON_NLOD = 0, 6647 WOW_REASON_AP_ASSOC_LOST, 6648 WOW_REASON_LOW_RSSI, 6649 WOW_REASON_DEAUTH_RECVD, 6650 WOW_REASON_DISASSOC_RECVD, 6651 WOW_REASON_GTK_HS_ERR, 6652 WOW_REASON_EAP_REQ, 6653 WOW_REASON_FOURWAY_HS_RECV, 6654 WOW_REASON_TIMER_INTR_RECV, 6655 WOW_REASON_PATTERN_MATCH_FOUND, 6656 WOW_REASON_RECV_MAGIC_PATTERN, 6657 WOW_REASON_P2P_DISC, 6658 WOW_REASON_WLAN_HB, 6659 WOW_REASON_CSA_EVENT, 6660 WOW_REASON_PROBE_REQ_WPS_IE_RECV, 6661 WOW_REASON_AUTH_REQ_RECV, 6662 WOW_REASON_ASSOC_REQ_RECV, 6663 WOW_REASON_HTT_EVENT, 6664 WOW_REASON_RA_MATCH, 6665 WOW_REASON_HOST_AUTO_SHUTDOWN, 6666 WOW_REASON_IOAC_MAGIC_EVENT, 6667 WOW_REASON_IOAC_SHORT_EVENT, 6668 WOW_REASON_IOAC_EXTEND_EVENT, 6669 WOW_REASON_IOAC_TIMER_EVENT, 6670 WOW_REASON_ROAM_HO, 6671 WOW_REASON_DFS_PHYERR_RADADR_EVENT, 6672 WOW_REASON_BEACON_RECV, 6673 WOW_REASON_CLIENT_KICKOUT_EVENT, 6674 WOW_REASON_DEBUG_TEST = 0xFF, 6675 }; 6676 6677 static inline const char *wow_reason(enum wmi_wow_wake_reason reason) 6678 { 6679 switch (reason) { 6680 C2S(WOW_REASON_UNSPECIFIED); 6681 C2S(WOW_REASON_NLOD); 6682 C2S(WOW_REASON_AP_ASSOC_LOST); 6683 C2S(WOW_REASON_LOW_RSSI); 6684 C2S(WOW_REASON_DEAUTH_RECVD); 6685 C2S(WOW_REASON_DISASSOC_RECVD); 6686 C2S(WOW_REASON_GTK_HS_ERR); 6687 C2S(WOW_REASON_EAP_REQ); 6688 C2S(WOW_REASON_FOURWAY_HS_RECV); 6689 C2S(WOW_REASON_TIMER_INTR_RECV); 6690 C2S(WOW_REASON_PATTERN_MATCH_FOUND); 6691 C2S(WOW_REASON_RECV_MAGIC_PATTERN); 6692 C2S(WOW_REASON_P2P_DISC); 6693 C2S(WOW_REASON_WLAN_HB); 6694 C2S(WOW_REASON_CSA_EVENT); 6695 C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV); 6696 C2S(WOW_REASON_AUTH_REQ_RECV); 6697 C2S(WOW_REASON_ASSOC_REQ_RECV); 6698 C2S(WOW_REASON_HTT_EVENT); 6699 C2S(WOW_REASON_RA_MATCH); 6700 C2S(WOW_REASON_HOST_AUTO_SHUTDOWN); 6701 C2S(WOW_REASON_IOAC_MAGIC_EVENT); 6702 C2S(WOW_REASON_IOAC_SHORT_EVENT); 6703 C2S(WOW_REASON_IOAC_EXTEND_EVENT); 6704 C2S(WOW_REASON_IOAC_TIMER_EVENT); 6705 C2S(WOW_REASON_ROAM_HO); 6706 C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT); 6707 C2S(WOW_REASON_BEACON_RECV); 6708 C2S(WOW_REASON_CLIENT_KICKOUT_EVENT); 6709 C2S(WOW_REASON_DEBUG_TEST); 6710 default: 6711 return NULL; 6712 } 6713 } 6714 6715 #undef C2S 6716 6717 struct wmi_wow_ev_arg { 6718 u32 vdev_id; 6719 u32 flag; 6720 enum wmi_wow_wake_reason wake_reason; 6721 u32 data_len; 6722 }; 6723 6724 #define WOW_MIN_PATTERN_SIZE 1 6725 #define WOW_MAX_PATTERN_SIZE 148 6726 #define WOW_MAX_PKT_OFFSET 128 6727 6728 enum wmi_tdls_state { 6729 WMI_TDLS_DISABLE, 6730 WMI_TDLS_ENABLE_PASSIVE, 6731 WMI_TDLS_ENABLE_ACTIVE, 6732 }; 6733 6734 enum wmi_tdls_peer_state { 6735 WMI_TDLS_PEER_STATE_PEERING, 6736 WMI_TDLS_PEER_STATE_CONNECTED, 6737 WMI_TDLS_PEER_STATE_TEARDOWN, 6738 }; 6739 6740 struct wmi_tdls_peer_update_cmd_arg { 6741 u32 vdev_id; 6742 enum wmi_tdls_peer_state peer_state; 6743 u8 addr[ETH_ALEN]; 6744 }; 6745 6746 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32 6747 6748 #define WMI_TDLS_PEER_SP_MASK 0x60 6749 #define WMI_TDLS_PEER_SP_LSB 5 6750 6751 enum wmi_tdls_options { 6752 WMI_TDLS_OFFCHAN_EN = BIT(0), 6753 WMI_TDLS_BUFFER_STA_EN = BIT(1), 6754 WMI_TDLS_SLEEP_STA_EN = BIT(2), 6755 }; 6756 6757 enum { 6758 WMI_TDLS_PEER_QOS_AC_VO = BIT(0), 6759 WMI_TDLS_PEER_QOS_AC_VI = BIT(1), 6760 WMI_TDLS_PEER_QOS_AC_BK = BIT(2), 6761 WMI_TDLS_PEER_QOS_AC_BE = BIT(3), 6762 }; 6763 6764 struct wmi_tdls_peer_capab_arg { 6765 u8 peer_uapsd_queues; 6766 u8 peer_max_sp; 6767 u32 buff_sta_support; 6768 u32 off_chan_support; 6769 u32 peer_curr_operclass; 6770 u32 self_curr_operclass; 6771 u32 peer_chan_len; 6772 u32 peer_operclass_len; 6773 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 6774 u32 is_peer_responder; 6775 u32 pref_offchan_num; 6776 u32 pref_offchan_bw; 6777 }; 6778 6779 struct wmi_10_4_tdls_set_state_cmd { 6780 __le32 vdev_id; 6781 __le32 state; 6782 __le32 notification_interval_ms; 6783 __le32 tx_discovery_threshold; 6784 __le32 tx_teardown_threshold; 6785 __le32 rssi_teardown_threshold; 6786 __le32 rssi_delta; 6787 __le32 tdls_options; 6788 __le32 tdls_peer_traffic_ind_window; 6789 __le32 tdls_peer_traffic_response_timeout_ms; 6790 __le32 tdls_puapsd_mask; 6791 __le32 tdls_puapsd_inactivity_time_ms; 6792 __le32 tdls_puapsd_rx_frame_threshold; 6793 __le32 teardown_notification_ms; 6794 __le32 tdls_peer_kickout_threshold; 6795 } __packed; 6796 6797 struct wmi_tdls_peer_capabilities { 6798 __le32 peer_qos; 6799 __le32 buff_sta_support; 6800 __le32 off_chan_support; 6801 __le32 peer_curr_operclass; 6802 __le32 self_curr_operclass; 6803 __le32 peer_chan_len; 6804 __le32 peer_operclass_len; 6805 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 6806 __le32 is_peer_responder; 6807 __le32 pref_offchan_num; 6808 __le32 pref_offchan_bw; 6809 struct wmi_channel peer_chan_list[1]; 6810 } __packed; 6811 6812 struct wmi_10_4_tdls_peer_update_cmd { 6813 __le32 vdev_id; 6814 struct wmi_mac_addr peer_macaddr; 6815 __le32 peer_state; 6816 __le32 reserved[4]; 6817 struct wmi_tdls_peer_capabilities peer_capab; 6818 } __packed; 6819 6820 enum wmi_tdls_peer_reason { 6821 WMI_TDLS_TEARDOWN_REASON_TX, 6822 WMI_TDLS_TEARDOWN_REASON_RSSI, 6823 WMI_TDLS_TEARDOWN_REASON_SCAN, 6824 WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE, 6825 WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT, 6826 WMI_TDLS_TEARDOWN_REASON_BAD_PTR, 6827 WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE, 6828 WMI_TDLS_ENTER_BUF_STA, 6829 WMI_TDLS_EXIT_BUF_STA, 6830 WMI_TDLS_ENTER_BT_BUSY_MODE, 6831 WMI_TDLS_EXIT_BT_BUSY_MODE, 6832 WMI_TDLS_SCAN_STARTED_EVENT, 6833 WMI_TDLS_SCAN_COMPLETED_EVENT, 6834 }; 6835 6836 enum wmi_tdls_peer_notification { 6837 WMI_TDLS_SHOULD_DISCOVER, 6838 WMI_TDLS_SHOULD_TEARDOWN, 6839 WMI_TDLS_PEER_DISCONNECTED, 6840 WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION, 6841 }; 6842 6843 struct wmi_tdls_peer_event { 6844 struct wmi_mac_addr peer_macaddr; 6845 /* see enum wmi_tdls_peer_notification*/ 6846 __le32 peer_status; 6847 /* see enum wmi_tdls_peer_reason */ 6848 __le32 peer_reason; 6849 __le32 vdev_id; 6850 } __packed; 6851 6852 enum wmi_txbf_conf { 6853 WMI_TXBF_CONF_UNSUPPORTED, 6854 WMI_TXBF_CONF_BEFORE_ASSOC, 6855 WMI_TXBF_CONF_AFTER_ASSOC, 6856 }; 6857 6858 #define WMI_CCA_DETECT_LEVEL_AUTO 0 6859 #define WMI_CCA_DETECT_MARGIN_AUTO 0 6860 6861 struct wmi_pdev_set_adaptive_cca_params { 6862 __le32 enable; 6863 __le32 cca_detect_level; 6864 __le32 cca_detect_margin; 6865 } __packed; 6866 6867 enum wmi_host_platform_type { 6868 WMI_HOST_PLATFORM_HIGH_PERF, 6869 WMI_HOST_PLATFORM_LOW_PERF, 6870 }; 6871 6872 enum wmi_bss_survey_req_type { 6873 WMI_BSS_SURVEY_REQ_TYPE_READ = 1, 6874 WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR, 6875 }; 6876 6877 struct wmi_pdev_chan_info_req_cmd { 6878 __le32 type; 6879 __le32 reserved; 6880 } __packed; 6881 6882 struct ath10k; 6883 struct ath10k_vif; 6884 struct ath10k_fw_stats_pdev; 6885 struct ath10k_fw_stats_peer; 6886 struct ath10k_fw_stats; 6887 6888 int ath10k_wmi_attach(struct ath10k *ar); 6889 void ath10k_wmi_detach(struct ath10k *ar); 6890 void ath10k_wmi_free_host_mem(struct ath10k *ar); 6891 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar); 6892 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar); 6893 6894 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 6895 int ath10k_wmi_connect(struct ath10k *ar); 6896 6897 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 6898 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); 6899 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb, 6900 u32 cmd_id); 6901 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg); 6902 6903 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src, 6904 struct ath10k_fw_stats_pdev *dst); 6905 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src, 6906 struct ath10k_fw_stats_pdev *dst); 6907 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src, 6908 struct ath10k_fw_stats_pdev *dst); 6909 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src, 6910 struct ath10k_fw_stats_pdev *dst); 6911 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src, 6912 struct ath10k_fw_stats_peer *dst); 6913 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar, 6914 struct wmi_host_mem_chunks *chunks); 6915 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn, 6916 const struct wmi_start_scan_arg *arg); 6917 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params, 6918 const struct wmi_wmm_params_arg *arg); 6919 void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch, 6920 const struct wmi_channel_arg *arg); 6921 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg); 6922 6923 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb); 6924 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb); 6925 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb); 6926 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb); 6927 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb); 6928 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb); 6929 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb); 6930 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb); 6931 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb); 6932 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb); 6933 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb); 6934 void ath10k_wmi_event_dfs(struct ath10k *ar, 6935 struct wmi_phyerr_ev_arg *phyerr, u64 tsf); 6936 void ath10k_wmi_event_spectral_scan(struct ath10k *ar, 6937 struct wmi_phyerr_ev_arg *phyerr, 6938 u64 tsf); 6939 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb); 6940 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb); 6941 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb); 6942 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb); 6943 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb); 6944 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb); 6945 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar, 6946 struct sk_buff *skb); 6947 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar, 6948 struct sk_buff *skb); 6949 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb); 6950 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb); 6951 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb); 6952 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb); 6953 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb); 6954 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar, 6955 struct sk_buff *skb); 6956 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb); 6957 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb); 6958 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb); 6959 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar, 6960 struct sk_buff *skb); 6961 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb); 6962 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb); 6963 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb); 6964 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb); 6965 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb); 6966 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf, 6967 int left_len, struct wmi_phyerr_ev_arg *arg); 6968 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar, 6969 struct ath10k_fw_stats *fw_stats, 6970 char *buf); 6971 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar, 6972 struct ath10k_fw_stats *fw_stats, 6973 char *buf); 6974 size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head); 6975 size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head); 6976 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar, 6977 struct ath10k_fw_stats *fw_stats, 6978 char *buf); 6979 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar, 6980 enum wmi_vdev_subtype subtype); 6981 int ath10k_wmi_barrier(struct ath10k *ar); 6982 6983 #endif /* _WMI_H_ */ 6984