1 /* 2 * Copyright (c) 2005-2011 Atheros Communications Inc. 3 * Copyright (c) 2011-2013 Qualcomm Atheros, Inc. 4 * 5 * Permission to use, copy, modify, and/or distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 */ 17 18 #ifndef _WMI_H_ 19 #define _WMI_H_ 20 21 #include <linux/types.h> 22 #include <net/mac80211.h> 23 24 /* 25 * This file specifies the WMI interface for the Unified Software 26 * Architecture. 27 * 28 * It includes definitions of all the commands and events. Commands are 29 * messages from the host to the target. Events and Replies are messages 30 * from the target to the host. 31 * 32 * Ownership of correctness in regards to WMI commands belongs to the host 33 * driver and the target is not required to validate parameters for value, 34 * proper range, or any other checking. 35 * 36 * Guidelines for extending this interface are below. 37 * 38 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff 39 * 40 * 2. Use ONLY u32 type for defining member variables within WMI 41 * command/event structures. Do not use u8, u16, bool or 42 * enum types within these structures. 43 * 44 * 3. DO NOT define bit fields within structures. Implement bit fields 45 * using masks if necessary. Do not use the programming language's bit 46 * field definition. 47 * 48 * 4. Define macros for encode/decode of u8, u16 fields within 49 * the u32 variables. Use these macros for set/get of these fields. 50 * Try to use this to optimize the structure without bloating it with 51 * u32 variables for every lower sized field. 52 * 53 * 5. Do not use PACK/UNPACK attributes for the structures as each member 54 * variable is already 4-byte aligned by virtue of being a u32 55 * type. 56 * 57 * 6. Comment each parameter part of the WMI command/event structure by 58 * using the 2 stars at the begining of C comment instead of one star to 59 * enable HTML document generation using Doxygen. 60 * 61 */ 62 63 /* Control Path */ 64 struct wmi_cmd_hdr { 65 __le32 cmd_id; 66 } __packed; 67 68 #define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF 69 #define WMI_CMD_HDR_CMD_ID_LSB 0 70 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000 71 #define WMI_CMD_HDR_PLT_PRIV_LSB 24 72 73 #define HTC_PROTOCOL_VERSION 0x0002 74 #define WMI_PROTOCOL_VERSION 0x0002 75 76 /* 77 * There is no signed version of __le32, so for a temporary solution come 78 * up with our own version. The idea is from fs/ntfs/types.h. 79 * 80 * Use a_ prefix so that it doesn't conflict if we get proper support to 81 * linux/types.h. 82 */ 83 typedef __s32 __bitwise a_sle32; 84 85 static inline a_sle32 a_cpu_to_sle32(s32 val) 86 { 87 return (__force a_sle32)cpu_to_le32(val); 88 } 89 90 static inline s32 a_sle32_to_cpu(a_sle32 val) 91 { 92 return le32_to_cpu((__force __le32)val); 93 } 94 95 enum wmi_service { 96 WMI_SERVICE_BEACON_OFFLOAD = 0, 97 WMI_SERVICE_SCAN_OFFLOAD, 98 WMI_SERVICE_ROAM_OFFLOAD, 99 WMI_SERVICE_BCN_MISS_OFFLOAD, 100 WMI_SERVICE_STA_PWRSAVE, 101 WMI_SERVICE_STA_ADVANCED_PWRSAVE, 102 WMI_SERVICE_AP_UAPSD, 103 WMI_SERVICE_AP_DFS, 104 WMI_SERVICE_11AC, 105 WMI_SERVICE_BLOCKACK, 106 WMI_SERVICE_PHYERR, 107 WMI_SERVICE_BCN_FILTER, 108 WMI_SERVICE_RTT, 109 WMI_SERVICE_RATECTRL, 110 WMI_SERVICE_WOW, 111 WMI_SERVICE_RATECTRL_CACHE, 112 WMI_SERVICE_IRAM_TIDS, 113 WMI_SERVICE_ARPNS_OFFLOAD, 114 WMI_SERVICE_NLO, 115 WMI_SERVICE_GTK_OFFLOAD, 116 WMI_SERVICE_SCAN_SCH, 117 WMI_SERVICE_CSA_OFFLOAD, 118 WMI_SERVICE_CHATTER, 119 WMI_SERVICE_COEX_FREQAVOID, 120 WMI_SERVICE_PACKET_POWER_SAVE, 121 WMI_SERVICE_FORCE_FW_HANG, 122 WMI_SERVICE_GPIO, 123 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 124 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 125 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 126 WMI_SERVICE_STA_KEEP_ALIVE, 127 WMI_SERVICE_TX_ENCAP, 128 WMI_SERVICE_BURST, 129 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, 130 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, 131 WMI_SERVICE_ROAM_SCAN_OFFLOAD, 132 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 133 WMI_SERVICE_EARLY_RX, 134 WMI_SERVICE_STA_SMPS, 135 WMI_SERVICE_FWTEST, 136 WMI_SERVICE_STA_WMMAC, 137 WMI_SERVICE_TDLS, 138 WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE, 139 WMI_SERVICE_ADAPTIVE_OCS, 140 WMI_SERVICE_BA_SSN_SUPPORT, 141 WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE, 142 WMI_SERVICE_WLAN_HB, 143 WMI_SERVICE_LTE_ANT_SHARE_SUPPORT, 144 WMI_SERVICE_BATCH_SCAN, 145 WMI_SERVICE_QPOWER, 146 WMI_SERVICE_PLMREQ, 147 WMI_SERVICE_THERMAL_MGMT, 148 WMI_SERVICE_RMC, 149 WMI_SERVICE_MHF_OFFLOAD, 150 WMI_SERVICE_COEX_SAR, 151 WMI_SERVICE_BCN_TXRATE_OVERRIDE, 152 WMI_SERVICE_NAN, 153 WMI_SERVICE_L1SS_STAT, 154 WMI_SERVICE_ESTIMATE_LINKSPEED, 155 WMI_SERVICE_OBSS_SCAN, 156 WMI_SERVICE_TDLS_OFFCHAN, 157 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, 158 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, 159 WMI_SERVICE_IBSS_PWRSAVE, 160 WMI_SERVICE_LPASS, 161 WMI_SERVICE_EXTSCAN, 162 WMI_SERVICE_D0WOW, 163 WMI_SERVICE_HSOFFLOAD, 164 WMI_SERVICE_ROAM_HO_OFFLOAD, 165 WMI_SERVICE_RX_FULL_REORDER, 166 WMI_SERVICE_DHCP_OFFLOAD, 167 WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT, 168 WMI_SERVICE_MDNS_OFFLOAD, 169 WMI_SERVICE_SAP_AUTH_OFFLOAD, 170 WMI_SERVICE_ATF, 171 WMI_SERVICE_COEX_GPIO, 172 WMI_SERVICE_ENHANCED_PROXY_STA, 173 WMI_SERVICE_TT, 174 WMI_SERVICE_PEER_CACHING, 175 WMI_SERVICE_AUX_SPECTRAL_INTF, 176 WMI_SERVICE_AUX_CHAN_LOAD_INTF, 177 WMI_SERVICE_BSS_CHANNEL_INFO_64, 178 WMI_SERVICE_EXT_RES_CFG_SUPPORT, 179 WMI_SERVICE_MESH_11S, 180 WMI_SERVICE_MESH_NON_11S, 181 WMI_SERVICE_PEER_STATS, 182 WMI_SERVICE_RESTRT_CHNL_SUPPORT, 183 184 /* keep last */ 185 WMI_SERVICE_MAX, 186 }; 187 188 enum wmi_10x_service { 189 WMI_10X_SERVICE_BEACON_OFFLOAD = 0, 190 WMI_10X_SERVICE_SCAN_OFFLOAD, 191 WMI_10X_SERVICE_ROAM_OFFLOAD, 192 WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 193 WMI_10X_SERVICE_STA_PWRSAVE, 194 WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 195 WMI_10X_SERVICE_AP_UAPSD, 196 WMI_10X_SERVICE_AP_DFS, 197 WMI_10X_SERVICE_11AC, 198 WMI_10X_SERVICE_BLOCKACK, 199 WMI_10X_SERVICE_PHYERR, 200 WMI_10X_SERVICE_BCN_FILTER, 201 WMI_10X_SERVICE_RTT, 202 WMI_10X_SERVICE_RATECTRL, 203 WMI_10X_SERVICE_WOW, 204 WMI_10X_SERVICE_RATECTRL_CACHE, 205 WMI_10X_SERVICE_IRAM_TIDS, 206 WMI_10X_SERVICE_BURST, 207 208 /* introduced in 10.2 */ 209 WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 210 WMI_10X_SERVICE_FORCE_FW_HANG, 211 WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 212 WMI_10X_SERVICE_ATF, 213 WMI_10X_SERVICE_COEX_GPIO, 214 WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 215 WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 216 WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 217 WMI_10X_SERVICE_MESH, 218 WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 219 WMI_10X_SERVICE_PEER_STATS, 220 }; 221 222 enum wmi_main_service { 223 WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0, 224 WMI_MAIN_SERVICE_SCAN_OFFLOAD, 225 WMI_MAIN_SERVICE_ROAM_OFFLOAD, 226 WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 227 WMI_MAIN_SERVICE_STA_PWRSAVE, 228 WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 229 WMI_MAIN_SERVICE_AP_UAPSD, 230 WMI_MAIN_SERVICE_AP_DFS, 231 WMI_MAIN_SERVICE_11AC, 232 WMI_MAIN_SERVICE_BLOCKACK, 233 WMI_MAIN_SERVICE_PHYERR, 234 WMI_MAIN_SERVICE_BCN_FILTER, 235 WMI_MAIN_SERVICE_RTT, 236 WMI_MAIN_SERVICE_RATECTRL, 237 WMI_MAIN_SERVICE_WOW, 238 WMI_MAIN_SERVICE_RATECTRL_CACHE, 239 WMI_MAIN_SERVICE_IRAM_TIDS, 240 WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 241 WMI_MAIN_SERVICE_NLO, 242 WMI_MAIN_SERVICE_GTK_OFFLOAD, 243 WMI_MAIN_SERVICE_SCAN_SCH, 244 WMI_MAIN_SERVICE_CSA_OFFLOAD, 245 WMI_MAIN_SERVICE_CHATTER, 246 WMI_MAIN_SERVICE_COEX_FREQAVOID, 247 WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 248 WMI_MAIN_SERVICE_FORCE_FW_HANG, 249 WMI_MAIN_SERVICE_GPIO, 250 WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 251 WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 252 WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 253 WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 254 WMI_MAIN_SERVICE_TX_ENCAP, 255 }; 256 257 enum wmi_10_4_service { 258 WMI_10_4_SERVICE_BEACON_OFFLOAD = 0, 259 WMI_10_4_SERVICE_SCAN_OFFLOAD, 260 WMI_10_4_SERVICE_ROAM_OFFLOAD, 261 WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 262 WMI_10_4_SERVICE_STA_PWRSAVE, 263 WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 264 WMI_10_4_SERVICE_AP_UAPSD, 265 WMI_10_4_SERVICE_AP_DFS, 266 WMI_10_4_SERVICE_11AC, 267 WMI_10_4_SERVICE_BLOCKACK, 268 WMI_10_4_SERVICE_PHYERR, 269 WMI_10_4_SERVICE_BCN_FILTER, 270 WMI_10_4_SERVICE_RTT, 271 WMI_10_4_SERVICE_RATECTRL, 272 WMI_10_4_SERVICE_WOW, 273 WMI_10_4_SERVICE_RATECTRL_CACHE, 274 WMI_10_4_SERVICE_IRAM_TIDS, 275 WMI_10_4_SERVICE_BURST, 276 WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 277 WMI_10_4_SERVICE_GTK_OFFLOAD, 278 WMI_10_4_SERVICE_SCAN_SCH, 279 WMI_10_4_SERVICE_CSA_OFFLOAD, 280 WMI_10_4_SERVICE_CHATTER, 281 WMI_10_4_SERVICE_COEX_FREQAVOID, 282 WMI_10_4_SERVICE_PACKET_POWER_SAVE, 283 WMI_10_4_SERVICE_FORCE_FW_HANG, 284 WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 285 WMI_10_4_SERVICE_GPIO, 286 WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 287 WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 288 WMI_10_4_SERVICE_STA_KEEP_ALIVE, 289 WMI_10_4_SERVICE_TX_ENCAP, 290 WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 291 WMI_10_4_SERVICE_EARLY_RX, 292 WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 293 WMI_10_4_SERVICE_TT, 294 WMI_10_4_SERVICE_ATF, 295 WMI_10_4_SERVICE_PEER_CACHING, 296 WMI_10_4_SERVICE_COEX_GPIO, 297 WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 298 WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 299 WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 300 WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 301 WMI_10_4_SERVICE_MESH_NON_11S, 302 WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 303 WMI_10_4_SERVICE_PEER_STATS, 304 WMI_10_4_SERVICE_MESH_11S, 305 }; 306 307 static inline char *wmi_service_name(int service_id) 308 { 309 #define SVCSTR(x) case x: return #x 310 311 switch (service_id) { 312 SVCSTR(WMI_SERVICE_BEACON_OFFLOAD); 313 SVCSTR(WMI_SERVICE_SCAN_OFFLOAD); 314 SVCSTR(WMI_SERVICE_ROAM_OFFLOAD); 315 SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD); 316 SVCSTR(WMI_SERVICE_STA_PWRSAVE); 317 SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE); 318 SVCSTR(WMI_SERVICE_AP_UAPSD); 319 SVCSTR(WMI_SERVICE_AP_DFS); 320 SVCSTR(WMI_SERVICE_11AC); 321 SVCSTR(WMI_SERVICE_BLOCKACK); 322 SVCSTR(WMI_SERVICE_PHYERR); 323 SVCSTR(WMI_SERVICE_BCN_FILTER); 324 SVCSTR(WMI_SERVICE_RTT); 325 SVCSTR(WMI_SERVICE_RATECTRL); 326 SVCSTR(WMI_SERVICE_WOW); 327 SVCSTR(WMI_SERVICE_RATECTRL_CACHE); 328 SVCSTR(WMI_SERVICE_IRAM_TIDS); 329 SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD); 330 SVCSTR(WMI_SERVICE_NLO); 331 SVCSTR(WMI_SERVICE_GTK_OFFLOAD); 332 SVCSTR(WMI_SERVICE_SCAN_SCH); 333 SVCSTR(WMI_SERVICE_CSA_OFFLOAD); 334 SVCSTR(WMI_SERVICE_CHATTER); 335 SVCSTR(WMI_SERVICE_COEX_FREQAVOID); 336 SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE); 337 SVCSTR(WMI_SERVICE_FORCE_FW_HANG); 338 SVCSTR(WMI_SERVICE_GPIO); 339 SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM); 340 SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG); 341 SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG); 342 SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE); 343 SVCSTR(WMI_SERVICE_TX_ENCAP); 344 SVCSTR(WMI_SERVICE_BURST); 345 SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT); 346 SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT); 347 SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD); 348 SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC); 349 SVCSTR(WMI_SERVICE_EARLY_RX); 350 SVCSTR(WMI_SERVICE_STA_SMPS); 351 SVCSTR(WMI_SERVICE_FWTEST); 352 SVCSTR(WMI_SERVICE_STA_WMMAC); 353 SVCSTR(WMI_SERVICE_TDLS); 354 SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE); 355 SVCSTR(WMI_SERVICE_ADAPTIVE_OCS); 356 SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT); 357 SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE); 358 SVCSTR(WMI_SERVICE_WLAN_HB); 359 SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT); 360 SVCSTR(WMI_SERVICE_BATCH_SCAN); 361 SVCSTR(WMI_SERVICE_QPOWER); 362 SVCSTR(WMI_SERVICE_PLMREQ); 363 SVCSTR(WMI_SERVICE_THERMAL_MGMT); 364 SVCSTR(WMI_SERVICE_RMC); 365 SVCSTR(WMI_SERVICE_MHF_OFFLOAD); 366 SVCSTR(WMI_SERVICE_COEX_SAR); 367 SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE); 368 SVCSTR(WMI_SERVICE_NAN); 369 SVCSTR(WMI_SERVICE_L1SS_STAT); 370 SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED); 371 SVCSTR(WMI_SERVICE_OBSS_SCAN); 372 SVCSTR(WMI_SERVICE_TDLS_OFFCHAN); 373 SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA); 374 SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA); 375 SVCSTR(WMI_SERVICE_IBSS_PWRSAVE); 376 SVCSTR(WMI_SERVICE_LPASS); 377 SVCSTR(WMI_SERVICE_EXTSCAN); 378 SVCSTR(WMI_SERVICE_D0WOW); 379 SVCSTR(WMI_SERVICE_HSOFFLOAD); 380 SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD); 381 SVCSTR(WMI_SERVICE_RX_FULL_REORDER); 382 SVCSTR(WMI_SERVICE_DHCP_OFFLOAD); 383 SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT); 384 SVCSTR(WMI_SERVICE_MDNS_OFFLOAD); 385 SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD); 386 SVCSTR(WMI_SERVICE_ATF); 387 SVCSTR(WMI_SERVICE_COEX_GPIO); 388 SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA); 389 SVCSTR(WMI_SERVICE_TT); 390 SVCSTR(WMI_SERVICE_PEER_CACHING); 391 SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF); 392 SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF); 393 SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64); 394 SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT); 395 SVCSTR(WMI_SERVICE_MESH_11S); 396 SVCSTR(WMI_SERVICE_MESH_NON_11S); 397 SVCSTR(WMI_SERVICE_PEER_STATS); 398 SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT); 399 default: 400 return NULL; 401 } 402 403 #undef SVCSTR 404 } 405 406 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 407 ((svc_id) < (len) && \ 408 __le32_to_cpu((wmi_svc_bmap)[(svc_id)/(sizeof(u32))]) & \ 409 BIT((svc_id)%(sizeof(u32)))) 410 411 #define SVCMAP(x, y, len) \ 412 do { \ 413 if (WMI_SERVICE_IS_ENABLED((in), (x), (len))) \ 414 __set_bit(y, out); \ 415 } while (0) 416 417 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out, 418 size_t len) 419 { 420 SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD, 421 WMI_SERVICE_BEACON_OFFLOAD, len); 422 SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD, 423 WMI_SERVICE_SCAN_OFFLOAD, len); 424 SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD, 425 WMI_SERVICE_ROAM_OFFLOAD, len); 426 SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 427 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 428 SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE, 429 WMI_SERVICE_STA_PWRSAVE, len); 430 SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 431 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 432 SVCMAP(WMI_10X_SERVICE_AP_UAPSD, 433 WMI_SERVICE_AP_UAPSD, len); 434 SVCMAP(WMI_10X_SERVICE_AP_DFS, 435 WMI_SERVICE_AP_DFS, len); 436 SVCMAP(WMI_10X_SERVICE_11AC, 437 WMI_SERVICE_11AC, len); 438 SVCMAP(WMI_10X_SERVICE_BLOCKACK, 439 WMI_SERVICE_BLOCKACK, len); 440 SVCMAP(WMI_10X_SERVICE_PHYERR, 441 WMI_SERVICE_PHYERR, len); 442 SVCMAP(WMI_10X_SERVICE_BCN_FILTER, 443 WMI_SERVICE_BCN_FILTER, len); 444 SVCMAP(WMI_10X_SERVICE_RTT, 445 WMI_SERVICE_RTT, len); 446 SVCMAP(WMI_10X_SERVICE_RATECTRL, 447 WMI_SERVICE_RATECTRL, len); 448 SVCMAP(WMI_10X_SERVICE_WOW, 449 WMI_SERVICE_WOW, len); 450 SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE, 451 WMI_SERVICE_RATECTRL_CACHE, len); 452 SVCMAP(WMI_10X_SERVICE_IRAM_TIDS, 453 WMI_SERVICE_IRAM_TIDS, len); 454 SVCMAP(WMI_10X_SERVICE_BURST, 455 WMI_SERVICE_BURST, len); 456 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 457 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 458 SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG, 459 WMI_SERVICE_FORCE_FW_HANG, len); 460 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 461 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 462 SVCMAP(WMI_10X_SERVICE_ATF, 463 WMI_SERVICE_ATF, len); 464 SVCMAP(WMI_10X_SERVICE_COEX_GPIO, 465 WMI_SERVICE_COEX_GPIO, len); 466 SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 467 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 468 SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 469 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 470 SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 471 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 472 SVCMAP(WMI_10X_SERVICE_MESH, 473 WMI_SERVICE_MESH_11S, len); 474 SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 475 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 476 SVCMAP(WMI_10X_SERVICE_PEER_STATS, 477 WMI_SERVICE_PEER_STATS, len); 478 } 479 480 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out, 481 size_t len) 482 { 483 SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD, 484 WMI_SERVICE_BEACON_OFFLOAD, len); 485 SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD, 486 WMI_SERVICE_SCAN_OFFLOAD, len); 487 SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD, 488 WMI_SERVICE_ROAM_OFFLOAD, len); 489 SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 490 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 491 SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE, 492 WMI_SERVICE_STA_PWRSAVE, len); 493 SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 494 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 495 SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD, 496 WMI_SERVICE_AP_UAPSD, len); 497 SVCMAP(WMI_MAIN_SERVICE_AP_DFS, 498 WMI_SERVICE_AP_DFS, len); 499 SVCMAP(WMI_MAIN_SERVICE_11AC, 500 WMI_SERVICE_11AC, len); 501 SVCMAP(WMI_MAIN_SERVICE_BLOCKACK, 502 WMI_SERVICE_BLOCKACK, len); 503 SVCMAP(WMI_MAIN_SERVICE_PHYERR, 504 WMI_SERVICE_PHYERR, len); 505 SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER, 506 WMI_SERVICE_BCN_FILTER, len); 507 SVCMAP(WMI_MAIN_SERVICE_RTT, 508 WMI_SERVICE_RTT, len); 509 SVCMAP(WMI_MAIN_SERVICE_RATECTRL, 510 WMI_SERVICE_RATECTRL, len); 511 SVCMAP(WMI_MAIN_SERVICE_WOW, 512 WMI_SERVICE_WOW, len); 513 SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE, 514 WMI_SERVICE_RATECTRL_CACHE, len); 515 SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS, 516 WMI_SERVICE_IRAM_TIDS, len); 517 SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 518 WMI_SERVICE_ARPNS_OFFLOAD, len); 519 SVCMAP(WMI_MAIN_SERVICE_NLO, 520 WMI_SERVICE_NLO, len); 521 SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD, 522 WMI_SERVICE_GTK_OFFLOAD, len); 523 SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH, 524 WMI_SERVICE_SCAN_SCH, len); 525 SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD, 526 WMI_SERVICE_CSA_OFFLOAD, len); 527 SVCMAP(WMI_MAIN_SERVICE_CHATTER, 528 WMI_SERVICE_CHATTER, len); 529 SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID, 530 WMI_SERVICE_COEX_FREQAVOID, len); 531 SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 532 WMI_SERVICE_PACKET_POWER_SAVE, len); 533 SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG, 534 WMI_SERVICE_FORCE_FW_HANG, len); 535 SVCMAP(WMI_MAIN_SERVICE_GPIO, 536 WMI_SERVICE_GPIO, len); 537 SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 538 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len); 539 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 540 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 541 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 542 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 543 SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 544 WMI_SERVICE_STA_KEEP_ALIVE, len); 545 SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP, 546 WMI_SERVICE_TX_ENCAP, len); 547 } 548 549 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out, 550 size_t len) 551 { 552 SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD, 553 WMI_SERVICE_BEACON_OFFLOAD, len); 554 SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD, 555 WMI_SERVICE_SCAN_OFFLOAD, len); 556 SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD, 557 WMI_SERVICE_ROAM_OFFLOAD, len); 558 SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 559 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 560 SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE, 561 WMI_SERVICE_STA_PWRSAVE, len); 562 SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 563 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 564 SVCMAP(WMI_10_4_SERVICE_AP_UAPSD, 565 WMI_SERVICE_AP_UAPSD, len); 566 SVCMAP(WMI_10_4_SERVICE_AP_DFS, 567 WMI_SERVICE_AP_DFS, len); 568 SVCMAP(WMI_10_4_SERVICE_11AC, 569 WMI_SERVICE_11AC, len); 570 SVCMAP(WMI_10_4_SERVICE_BLOCKACK, 571 WMI_SERVICE_BLOCKACK, len); 572 SVCMAP(WMI_10_4_SERVICE_PHYERR, 573 WMI_SERVICE_PHYERR, len); 574 SVCMAP(WMI_10_4_SERVICE_BCN_FILTER, 575 WMI_SERVICE_BCN_FILTER, len); 576 SVCMAP(WMI_10_4_SERVICE_RTT, 577 WMI_SERVICE_RTT, len); 578 SVCMAP(WMI_10_4_SERVICE_RATECTRL, 579 WMI_SERVICE_RATECTRL, len); 580 SVCMAP(WMI_10_4_SERVICE_WOW, 581 WMI_SERVICE_WOW, len); 582 SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE, 583 WMI_SERVICE_RATECTRL_CACHE, len); 584 SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS, 585 WMI_SERVICE_IRAM_TIDS, len); 586 SVCMAP(WMI_10_4_SERVICE_BURST, 587 WMI_SERVICE_BURST, len); 588 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 589 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 590 SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD, 591 WMI_SERVICE_GTK_OFFLOAD, len); 592 SVCMAP(WMI_10_4_SERVICE_SCAN_SCH, 593 WMI_SERVICE_SCAN_SCH, len); 594 SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD, 595 WMI_SERVICE_CSA_OFFLOAD, len); 596 SVCMAP(WMI_10_4_SERVICE_CHATTER, 597 WMI_SERVICE_CHATTER, len); 598 SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID, 599 WMI_SERVICE_COEX_FREQAVOID, len); 600 SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE, 601 WMI_SERVICE_PACKET_POWER_SAVE, len); 602 SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG, 603 WMI_SERVICE_FORCE_FW_HANG, len); 604 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 605 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 606 SVCMAP(WMI_10_4_SERVICE_GPIO, 607 WMI_SERVICE_GPIO, len); 608 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 609 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 610 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 611 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 612 SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE, 613 WMI_SERVICE_STA_KEEP_ALIVE, len); 614 SVCMAP(WMI_10_4_SERVICE_TX_ENCAP, 615 WMI_SERVICE_TX_ENCAP, len); 616 SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 617 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len); 618 SVCMAP(WMI_10_4_SERVICE_EARLY_RX, 619 WMI_SERVICE_EARLY_RX, len); 620 SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 621 WMI_SERVICE_ENHANCED_PROXY_STA, len); 622 SVCMAP(WMI_10_4_SERVICE_TT, 623 WMI_SERVICE_TT, len); 624 SVCMAP(WMI_10_4_SERVICE_ATF, 625 WMI_SERVICE_ATF, len); 626 SVCMAP(WMI_10_4_SERVICE_PEER_CACHING, 627 WMI_SERVICE_PEER_CACHING, len); 628 SVCMAP(WMI_10_4_SERVICE_COEX_GPIO, 629 WMI_SERVICE_COEX_GPIO, len); 630 SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 631 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 632 SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 633 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 634 SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 635 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 636 SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 637 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 638 SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S, 639 WMI_SERVICE_MESH_NON_11S, len); 640 SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 641 WMI_SERVICE_RESTRT_CHNL_SUPPORT, len); 642 SVCMAP(WMI_10_4_SERVICE_PEER_STATS, 643 WMI_SERVICE_PEER_STATS, len); 644 SVCMAP(WMI_10_4_SERVICE_MESH_11S, 645 WMI_SERVICE_MESH_11S, len); 646 } 647 648 #undef SVCMAP 649 650 /* 2 word representation of MAC addr */ 651 struct wmi_mac_addr { 652 union { 653 u8 addr[6]; 654 struct { 655 u32 word0; 656 u32 word1; 657 } __packed; 658 } __packed; 659 } __packed; 660 661 struct wmi_cmd_map { 662 u32 init_cmdid; 663 u32 start_scan_cmdid; 664 u32 stop_scan_cmdid; 665 u32 scan_chan_list_cmdid; 666 u32 scan_sch_prio_tbl_cmdid; 667 u32 pdev_set_regdomain_cmdid; 668 u32 pdev_set_channel_cmdid; 669 u32 pdev_set_param_cmdid; 670 u32 pdev_pktlog_enable_cmdid; 671 u32 pdev_pktlog_disable_cmdid; 672 u32 pdev_set_wmm_params_cmdid; 673 u32 pdev_set_ht_cap_ie_cmdid; 674 u32 pdev_set_vht_cap_ie_cmdid; 675 u32 pdev_set_dscp_tid_map_cmdid; 676 u32 pdev_set_quiet_mode_cmdid; 677 u32 pdev_green_ap_ps_enable_cmdid; 678 u32 pdev_get_tpc_config_cmdid; 679 u32 pdev_set_base_macaddr_cmdid; 680 u32 vdev_create_cmdid; 681 u32 vdev_delete_cmdid; 682 u32 vdev_start_request_cmdid; 683 u32 vdev_restart_request_cmdid; 684 u32 vdev_up_cmdid; 685 u32 vdev_stop_cmdid; 686 u32 vdev_down_cmdid; 687 u32 vdev_set_param_cmdid; 688 u32 vdev_install_key_cmdid; 689 u32 peer_create_cmdid; 690 u32 peer_delete_cmdid; 691 u32 peer_flush_tids_cmdid; 692 u32 peer_set_param_cmdid; 693 u32 peer_assoc_cmdid; 694 u32 peer_add_wds_entry_cmdid; 695 u32 peer_remove_wds_entry_cmdid; 696 u32 peer_mcast_group_cmdid; 697 u32 bcn_tx_cmdid; 698 u32 pdev_send_bcn_cmdid; 699 u32 bcn_tmpl_cmdid; 700 u32 bcn_filter_rx_cmdid; 701 u32 prb_req_filter_rx_cmdid; 702 u32 mgmt_tx_cmdid; 703 u32 prb_tmpl_cmdid; 704 u32 addba_clear_resp_cmdid; 705 u32 addba_send_cmdid; 706 u32 addba_status_cmdid; 707 u32 delba_send_cmdid; 708 u32 addba_set_resp_cmdid; 709 u32 send_singleamsdu_cmdid; 710 u32 sta_powersave_mode_cmdid; 711 u32 sta_powersave_param_cmdid; 712 u32 sta_mimo_ps_mode_cmdid; 713 u32 pdev_dfs_enable_cmdid; 714 u32 pdev_dfs_disable_cmdid; 715 u32 roam_scan_mode; 716 u32 roam_scan_rssi_threshold; 717 u32 roam_scan_period; 718 u32 roam_scan_rssi_change_threshold; 719 u32 roam_ap_profile; 720 u32 ofl_scan_add_ap_profile; 721 u32 ofl_scan_remove_ap_profile; 722 u32 ofl_scan_period; 723 u32 p2p_dev_set_device_info; 724 u32 p2p_dev_set_discoverability; 725 u32 p2p_go_set_beacon_ie; 726 u32 p2p_go_set_probe_resp_ie; 727 u32 p2p_set_vendor_ie_data_cmdid; 728 u32 ap_ps_peer_param_cmdid; 729 u32 ap_ps_peer_uapsd_coex_cmdid; 730 u32 peer_rate_retry_sched_cmdid; 731 u32 wlan_profile_trigger_cmdid; 732 u32 wlan_profile_set_hist_intvl_cmdid; 733 u32 wlan_profile_get_profile_data_cmdid; 734 u32 wlan_profile_enable_profile_id_cmdid; 735 u32 wlan_profile_list_profile_id_cmdid; 736 u32 pdev_suspend_cmdid; 737 u32 pdev_resume_cmdid; 738 u32 add_bcn_filter_cmdid; 739 u32 rmv_bcn_filter_cmdid; 740 u32 wow_add_wake_pattern_cmdid; 741 u32 wow_del_wake_pattern_cmdid; 742 u32 wow_enable_disable_wake_event_cmdid; 743 u32 wow_enable_cmdid; 744 u32 wow_hostwakeup_from_sleep_cmdid; 745 u32 rtt_measreq_cmdid; 746 u32 rtt_tsf_cmdid; 747 u32 vdev_spectral_scan_configure_cmdid; 748 u32 vdev_spectral_scan_enable_cmdid; 749 u32 request_stats_cmdid; 750 u32 set_arp_ns_offload_cmdid; 751 u32 network_list_offload_config_cmdid; 752 u32 gtk_offload_cmdid; 753 u32 csa_offload_enable_cmdid; 754 u32 csa_offload_chanswitch_cmdid; 755 u32 chatter_set_mode_cmdid; 756 u32 peer_tid_addba_cmdid; 757 u32 peer_tid_delba_cmdid; 758 u32 sta_dtim_ps_method_cmdid; 759 u32 sta_uapsd_auto_trig_cmdid; 760 u32 sta_keepalive_cmd; 761 u32 echo_cmdid; 762 u32 pdev_utf_cmdid; 763 u32 dbglog_cfg_cmdid; 764 u32 pdev_qvit_cmdid; 765 u32 pdev_ftm_intg_cmdid; 766 u32 vdev_set_keepalive_cmdid; 767 u32 vdev_get_keepalive_cmdid; 768 u32 force_fw_hang_cmdid; 769 u32 gpio_config_cmdid; 770 u32 gpio_output_cmdid; 771 u32 pdev_get_temperature_cmdid; 772 u32 vdev_set_wmm_params_cmdid; 773 u32 tdls_set_state_cmdid; 774 u32 tdls_peer_update_cmdid; 775 u32 adaptive_qcs_cmdid; 776 u32 scan_update_request_cmdid; 777 u32 vdev_standby_response_cmdid; 778 u32 vdev_resume_response_cmdid; 779 u32 wlan_peer_caching_add_peer_cmdid; 780 u32 wlan_peer_caching_evict_peer_cmdid; 781 u32 wlan_peer_caching_restore_peer_cmdid; 782 u32 wlan_peer_caching_print_all_peers_info_cmdid; 783 u32 peer_update_wds_entry_cmdid; 784 u32 peer_add_proxy_sta_entry_cmdid; 785 u32 rtt_keepalive_cmdid; 786 u32 oem_req_cmdid; 787 u32 nan_cmdid; 788 u32 vdev_ratemask_cmdid; 789 u32 qboost_cfg_cmdid; 790 u32 pdev_smart_ant_enable_cmdid; 791 u32 pdev_smart_ant_set_rx_antenna_cmdid; 792 u32 peer_smart_ant_set_tx_antenna_cmdid; 793 u32 peer_smart_ant_set_train_info_cmdid; 794 u32 peer_smart_ant_set_node_config_ops_cmdid; 795 u32 pdev_set_antenna_switch_table_cmdid; 796 u32 pdev_set_ctl_table_cmdid; 797 u32 pdev_set_mimogain_table_cmdid; 798 u32 pdev_ratepwr_table_cmdid; 799 u32 pdev_ratepwr_chainmsk_table_cmdid; 800 u32 pdev_fips_cmdid; 801 u32 tt_set_conf_cmdid; 802 u32 fwtest_cmdid; 803 u32 vdev_atf_request_cmdid; 804 u32 peer_atf_request_cmdid; 805 u32 pdev_get_ani_cck_config_cmdid; 806 u32 pdev_get_ani_ofdm_config_cmdid; 807 u32 pdev_reserve_ast_entry_cmdid; 808 u32 pdev_get_nfcal_power_cmdid; 809 u32 pdev_get_tpc_cmdid; 810 u32 pdev_get_ast_info_cmdid; 811 u32 vdev_set_dscp_tid_map_cmdid; 812 u32 pdev_get_info_cmdid; 813 u32 vdev_get_info_cmdid; 814 u32 vdev_filter_neighbor_rx_packets_cmdid; 815 u32 mu_cal_start_cmdid; 816 u32 set_cca_params_cmdid; 817 u32 pdev_bss_chan_info_request_cmdid; 818 u32 pdev_enable_adaptive_cca_cmdid; 819 }; 820 821 /* 822 * wmi command groups. 823 */ 824 enum wmi_cmd_group { 825 /* 0 to 2 are reserved */ 826 WMI_GRP_START = 0x3, 827 WMI_GRP_SCAN = WMI_GRP_START, 828 WMI_GRP_PDEV, 829 WMI_GRP_VDEV, 830 WMI_GRP_PEER, 831 WMI_GRP_MGMT, 832 WMI_GRP_BA_NEG, 833 WMI_GRP_STA_PS, 834 WMI_GRP_DFS, 835 WMI_GRP_ROAM, 836 WMI_GRP_OFL_SCAN, 837 WMI_GRP_P2P, 838 WMI_GRP_AP_PS, 839 WMI_GRP_RATE_CTRL, 840 WMI_GRP_PROFILE, 841 WMI_GRP_SUSPEND, 842 WMI_GRP_BCN_FILTER, 843 WMI_GRP_WOW, 844 WMI_GRP_RTT, 845 WMI_GRP_SPECTRAL, 846 WMI_GRP_STATS, 847 WMI_GRP_ARP_NS_OFL, 848 WMI_GRP_NLO_OFL, 849 WMI_GRP_GTK_OFL, 850 WMI_GRP_CSA_OFL, 851 WMI_GRP_CHATTER, 852 WMI_GRP_TID_ADDBA, 853 WMI_GRP_MISC, 854 WMI_GRP_GPIO, 855 }; 856 857 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1) 858 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1) 859 860 #define WMI_CMD_UNSUPPORTED 0 861 862 /* Command IDs and command events for MAIN FW. */ 863 enum wmi_cmd_id { 864 WMI_INIT_CMDID = 0x1, 865 866 /* Scan specific commands */ 867 WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN), 868 WMI_STOP_SCAN_CMDID, 869 WMI_SCAN_CHAN_LIST_CMDID, 870 WMI_SCAN_SCH_PRIO_TBL_CMDID, 871 872 /* PDEV (physical device) specific commands */ 873 WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV), 874 WMI_PDEV_SET_CHANNEL_CMDID, 875 WMI_PDEV_SET_PARAM_CMDID, 876 WMI_PDEV_PKTLOG_ENABLE_CMDID, 877 WMI_PDEV_PKTLOG_DISABLE_CMDID, 878 WMI_PDEV_SET_WMM_PARAMS_CMDID, 879 WMI_PDEV_SET_HT_CAP_IE_CMDID, 880 WMI_PDEV_SET_VHT_CAP_IE_CMDID, 881 WMI_PDEV_SET_DSCP_TID_MAP_CMDID, 882 WMI_PDEV_SET_QUIET_MODE_CMDID, 883 WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID, 884 WMI_PDEV_GET_TPC_CONFIG_CMDID, 885 WMI_PDEV_SET_BASE_MACADDR_CMDID, 886 887 /* VDEV (virtual device) specific commands */ 888 WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV), 889 WMI_VDEV_DELETE_CMDID, 890 WMI_VDEV_START_REQUEST_CMDID, 891 WMI_VDEV_RESTART_REQUEST_CMDID, 892 WMI_VDEV_UP_CMDID, 893 WMI_VDEV_STOP_CMDID, 894 WMI_VDEV_DOWN_CMDID, 895 WMI_VDEV_SET_PARAM_CMDID, 896 WMI_VDEV_INSTALL_KEY_CMDID, 897 898 /* peer specific commands */ 899 WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER), 900 WMI_PEER_DELETE_CMDID, 901 WMI_PEER_FLUSH_TIDS_CMDID, 902 WMI_PEER_SET_PARAM_CMDID, 903 WMI_PEER_ASSOC_CMDID, 904 WMI_PEER_ADD_WDS_ENTRY_CMDID, 905 WMI_PEER_REMOVE_WDS_ENTRY_CMDID, 906 WMI_PEER_MCAST_GROUP_CMDID, 907 908 /* beacon/management specific commands */ 909 WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT), 910 WMI_PDEV_SEND_BCN_CMDID, 911 WMI_BCN_TMPL_CMDID, 912 WMI_BCN_FILTER_RX_CMDID, 913 WMI_PRB_REQ_FILTER_RX_CMDID, 914 WMI_MGMT_TX_CMDID, 915 WMI_PRB_TMPL_CMDID, 916 917 /* commands to directly control BA negotiation directly from host. */ 918 WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG), 919 WMI_ADDBA_SEND_CMDID, 920 WMI_ADDBA_STATUS_CMDID, 921 WMI_DELBA_SEND_CMDID, 922 WMI_ADDBA_SET_RESP_CMDID, 923 WMI_SEND_SINGLEAMSDU_CMDID, 924 925 /* Station power save specific config */ 926 WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS), 927 WMI_STA_POWERSAVE_PARAM_CMDID, 928 WMI_STA_MIMO_PS_MODE_CMDID, 929 930 /** DFS-specific commands */ 931 WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS), 932 WMI_PDEV_DFS_DISABLE_CMDID, 933 934 /* Roaming specific commands */ 935 WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM), 936 WMI_ROAM_SCAN_RSSI_THRESHOLD, 937 WMI_ROAM_SCAN_PERIOD, 938 WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 939 WMI_ROAM_AP_PROFILE, 940 941 /* offload scan specific commands */ 942 WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN), 943 WMI_OFL_SCAN_REMOVE_AP_PROFILE, 944 WMI_OFL_SCAN_PERIOD, 945 946 /* P2P specific commands */ 947 WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P), 948 WMI_P2P_DEV_SET_DISCOVERABILITY, 949 WMI_P2P_GO_SET_BEACON_IE, 950 WMI_P2P_GO_SET_PROBE_RESP_IE, 951 WMI_P2P_SET_VENDOR_IE_DATA_CMDID, 952 953 /* AP power save specific config */ 954 WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS), 955 WMI_AP_PS_PEER_UAPSD_COEX_CMDID, 956 957 /* Rate-control specific commands */ 958 WMI_PEER_RATE_RETRY_SCHED_CMDID = 959 WMI_CMD_GRP(WMI_GRP_RATE_CTRL), 960 961 /* WLAN Profiling commands. */ 962 WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE), 963 WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 964 WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 965 WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 966 WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 967 968 /* Suspend resume command Ids */ 969 WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND), 970 WMI_PDEV_RESUME_CMDID, 971 972 /* Beacon filter commands */ 973 WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER), 974 WMI_RMV_BCN_FILTER_CMDID, 975 976 /* WOW Specific WMI commands*/ 977 WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW), 978 WMI_WOW_DEL_WAKE_PATTERN_CMDID, 979 WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 980 WMI_WOW_ENABLE_CMDID, 981 WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 982 983 /* RTT measurement related cmd */ 984 WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT), 985 WMI_RTT_TSF_CMDID, 986 987 /* spectral scan commands */ 988 WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL), 989 WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 990 991 /* F/W stats */ 992 WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS), 993 994 /* ARP OFFLOAD REQUEST*/ 995 WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL), 996 997 /* NS offload confid*/ 998 WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL), 999 1000 /* GTK offload Specific WMI commands*/ 1001 WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL), 1002 1003 /* CSA offload Specific WMI commands*/ 1004 WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL), 1005 WMI_CSA_OFFLOAD_CHANSWITCH_CMDID, 1006 1007 /* Chatter commands*/ 1008 WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER), 1009 1010 /* addba specific commands */ 1011 WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA), 1012 WMI_PEER_TID_DELBA_CMDID, 1013 1014 /* set station mimo powersave method */ 1015 WMI_STA_DTIM_PS_METHOD_CMDID, 1016 /* Configure the Station UAPSD AC Auto Trigger Parameters */ 1017 WMI_STA_UAPSD_AUTO_TRIG_CMDID, 1018 1019 /* STA Keep alive parameter configuration, 1020 Requires WMI_SERVICE_STA_KEEP_ALIVE */ 1021 WMI_STA_KEEPALIVE_CMD, 1022 1023 /* misc command group */ 1024 WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC), 1025 WMI_PDEV_UTF_CMDID, 1026 WMI_DBGLOG_CFG_CMDID, 1027 WMI_PDEV_QVIT_CMDID, 1028 WMI_PDEV_FTM_INTG_CMDID, 1029 WMI_VDEV_SET_KEEPALIVE_CMDID, 1030 WMI_VDEV_GET_KEEPALIVE_CMDID, 1031 WMI_FORCE_FW_HANG_CMDID, 1032 1033 /* GPIO Configuration */ 1034 WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO), 1035 WMI_GPIO_OUTPUT_CMDID, 1036 }; 1037 1038 enum wmi_event_id { 1039 WMI_SERVICE_READY_EVENTID = 0x1, 1040 WMI_READY_EVENTID, 1041 1042 /* Scan specific events */ 1043 WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN), 1044 1045 /* PDEV specific events */ 1046 WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV), 1047 WMI_CHAN_INFO_EVENTID, 1048 WMI_PHYERR_EVENTID, 1049 1050 /* VDEV specific events */ 1051 WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV), 1052 WMI_VDEV_STOPPED_EVENTID, 1053 WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID, 1054 1055 /* peer specific events */ 1056 WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER), 1057 1058 /* beacon/mgmt specific events */ 1059 WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT), 1060 WMI_HOST_SWBA_EVENTID, 1061 WMI_TBTTOFFSET_UPDATE_EVENTID, 1062 1063 /* ADDBA Related WMI Events*/ 1064 WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG), 1065 WMI_TX_ADDBA_COMPLETE_EVENTID, 1066 1067 /* Roam event to trigger roaming on host */ 1068 WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM), 1069 WMI_PROFILE_MATCH, 1070 1071 /* WoW */ 1072 WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW), 1073 1074 /* RTT */ 1075 WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT), 1076 WMI_TSF_MEASUREMENT_REPORT_EVENTID, 1077 WMI_RTT_ERROR_REPORT_EVENTID, 1078 1079 /* GTK offload */ 1080 WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL), 1081 WMI_GTK_REKEY_FAIL_EVENTID, 1082 1083 /* CSA IE received event */ 1084 WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL), 1085 1086 /* Misc events */ 1087 WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC), 1088 WMI_PDEV_UTF_EVENTID, 1089 WMI_DEBUG_MESG_EVENTID, 1090 WMI_UPDATE_STATS_EVENTID, 1091 WMI_DEBUG_PRINT_EVENTID, 1092 WMI_DCS_INTERFERENCE_EVENTID, 1093 WMI_PDEV_QVIT_EVENTID, 1094 WMI_WLAN_PROFILE_DATA_EVENTID, 1095 WMI_PDEV_FTM_INTG_EVENTID, 1096 WMI_WLAN_FREQ_AVOID_EVENTID, 1097 WMI_VDEV_GET_KEEPALIVE_EVENTID, 1098 1099 /* GPIO Event */ 1100 WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO), 1101 }; 1102 1103 /* Command IDs and command events for 10.X firmware */ 1104 enum wmi_10x_cmd_id { 1105 WMI_10X_START_CMDID = 0x9000, 1106 WMI_10X_END_CMDID = 0x9FFF, 1107 1108 /* initialize the wlan sub system */ 1109 WMI_10X_INIT_CMDID, 1110 1111 /* Scan specific commands */ 1112 1113 WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID, 1114 WMI_10X_STOP_SCAN_CMDID, 1115 WMI_10X_SCAN_CHAN_LIST_CMDID, 1116 WMI_10X_ECHO_CMDID, 1117 1118 /* PDEV(physical device) specific commands */ 1119 WMI_10X_PDEV_SET_REGDOMAIN_CMDID, 1120 WMI_10X_PDEV_SET_CHANNEL_CMDID, 1121 WMI_10X_PDEV_SET_PARAM_CMDID, 1122 WMI_10X_PDEV_PKTLOG_ENABLE_CMDID, 1123 WMI_10X_PDEV_PKTLOG_DISABLE_CMDID, 1124 WMI_10X_PDEV_SET_WMM_PARAMS_CMDID, 1125 WMI_10X_PDEV_SET_HT_CAP_IE_CMDID, 1126 WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID, 1127 WMI_10X_PDEV_SET_BASE_MACADDR_CMDID, 1128 WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID, 1129 WMI_10X_PDEV_SET_QUIET_MODE_CMDID, 1130 WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1131 WMI_10X_PDEV_GET_TPC_CONFIG_CMDID, 1132 1133 /* VDEV(virtual device) specific commands */ 1134 WMI_10X_VDEV_CREATE_CMDID, 1135 WMI_10X_VDEV_DELETE_CMDID, 1136 WMI_10X_VDEV_START_REQUEST_CMDID, 1137 WMI_10X_VDEV_RESTART_REQUEST_CMDID, 1138 WMI_10X_VDEV_UP_CMDID, 1139 WMI_10X_VDEV_STOP_CMDID, 1140 WMI_10X_VDEV_DOWN_CMDID, 1141 WMI_10X_VDEV_STANDBY_RESPONSE_CMDID, 1142 WMI_10X_VDEV_RESUME_RESPONSE_CMDID, 1143 WMI_10X_VDEV_SET_PARAM_CMDID, 1144 WMI_10X_VDEV_INSTALL_KEY_CMDID, 1145 1146 /* peer specific commands */ 1147 WMI_10X_PEER_CREATE_CMDID, 1148 WMI_10X_PEER_DELETE_CMDID, 1149 WMI_10X_PEER_FLUSH_TIDS_CMDID, 1150 WMI_10X_PEER_SET_PARAM_CMDID, 1151 WMI_10X_PEER_ASSOC_CMDID, 1152 WMI_10X_PEER_ADD_WDS_ENTRY_CMDID, 1153 WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID, 1154 WMI_10X_PEER_MCAST_GROUP_CMDID, 1155 1156 /* beacon/management specific commands */ 1157 1158 WMI_10X_BCN_TX_CMDID, 1159 WMI_10X_BCN_PRB_TMPL_CMDID, 1160 WMI_10X_BCN_FILTER_RX_CMDID, 1161 WMI_10X_PRB_REQ_FILTER_RX_CMDID, 1162 WMI_10X_MGMT_TX_CMDID, 1163 1164 /* commands to directly control ba negotiation directly from host. */ 1165 WMI_10X_ADDBA_CLEAR_RESP_CMDID, 1166 WMI_10X_ADDBA_SEND_CMDID, 1167 WMI_10X_ADDBA_STATUS_CMDID, 1168 WMI_10X_DELBA_SEND_CMDID, 1169 WMI_10X_ADDBA_SET_RESP_CMDID, 1170 WMI_10X_SEND_SINGLEAMSDU_CMDID, 1171 1172 /* Station power save specific config */ 1173 WMI_10X_STA_POWERSAVE_MODE_CMDID, 1174 WMI_10X_STA_POWERSAVE_PARAM_CMDID, 1175 WMI_10X_STA_MIMO_PS_MODE_CMDID, 1176 1177 /* set debug log config */ 1178 WMI_10X_DBGLOG_CFG_CMDID, 1179 1180 /* DFS-specific commands */ 1181 WMI_10X_PDEV_DFS_ENABLE_CMDID, 1182 WMI_10X_PDEV_DFS_DISABLE_CMDID, 1183 1184 /* QVIT specific command id */ 1185 WMI_10X_PDEV_QVIT_CMDID, 1186 1187 /* Offload Scan and Roaming related commands */ 1188 WMI_10X_ROAM_SCAN_MODE, 1189 WMI_10X_ROAM_SCAN_RSSI_THRESHOLD, 1190 WMI_10X_ROAM_SCAN_PERIOD, 1191 WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1192 WMI_10X_ROAM_AP_PROFILE, 1193 WMI_10X_OFL_SCAN_ADD_AP_PROFILE, 1194 WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE, 1195 WMI_10X_OFL_SCAN_PERIOD, 1196 1197 /* P2P specific commands */ 1198 WMI_10X_P2P_DEV_SET_DEVICE_INFO, 1199 WMI_10X_P2P_DEV_SET_DISCOVERABILITY, 1200 WMI_10X_P2P_GO_SET_BEACON_IE, 1201 WMI_10X_P2P_GO_SET_PROBE_RESP_IE, 1202 1203 /* AP power save specific config */ 1204 WMI_10X_AP_PS_PEER_PARAM_CMDID, 1205 WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID, 1206 1207 /* Rate-control specific commands */ 1208 WMI_10X_PEER_RATE_RETRY_SCHED_CMDID, 1209 1210 /* WLAN Profiling commands. */ 1211 WMI_10X_WLAN_PROFILE_TRIGGER_CMDID, 1212 WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1213 WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1214 WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1215 WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1216 1217 /* Suspend resume command Ids */ 1218 WMI_10X_PDEV_SUSPEND_CMDID, 1219 WMI_10X_PDEV_RESUME_CMDID, 1220 1221 /* Beacon filter commands */ 1222 WMI_10X_ADD_BCN_FILTER_CMDID, 1223 WMI_10X_RMV_BCN_FILTER_CMDID, 1224 1225 /* WOW Specific WMI commands*/ 1226 WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID, 1227 WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID, 1228 WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1229 WMI_10X_WOW_ENABLE_CMDID, 1230 WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1231 1232 /* RTT measurement related cmd */ 1233 WMI_10X_RTT_MEASREQ_CMDID, 1234 WMI_10X_RTT_TSF_CMDID, 1235 1236 /* transmit beacon by value */ 1237 WMI_10X_PDEV_SEND_BCN_CMDID, 1238 1239 /* F/W stats */ 1240 WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1241 WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1242 WMI_10X_REQUEST_STATS_CMDID, 1243 1244 /* GPIO Configuration */ 1245 WMI_10X_GPIO_CONFIG_CMDID, 1246 WMI_10X_GPIO_OUTPUT_CMDID, 1247 1248 WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1, 1249 }; 1250 1251 enum wmi_10x_event_id { 1252 WMI_10X_SERVICE_READY_EVENTID = 0x8000, 1253 WMI_10X_READY_EVENTID, 1254 WMI_10X_START_EVENTID = 0x9000, 1255 WMI_10X_END_EVENTID = 0x9FFF, 1256 1257 /* Scan specific events */ 1258 WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID, 1259 WMI_10X_ECHO_EVENTID, 1260 WMI_10X_DEBUG_MESG_EVENTID, 1261 WMI_10X_UPDATE_STATS_EVENTID, 1262 1263 /* Instantaneous RSSI event */ 1264 WMI_10X_INST_RSSI_STATS_EVENTID, 1265 1266 /* VDEV specific events */ 1267 WMI_10X_VDEV_START_RESP_EVENTID, 1268 WMI_10X_VDEV_STANDBY_REQ_EVENTID, 1269 WMI_10X_VDEV_RESUME_REQ_EVENTID, 1270 WMI_10X_VDEV_STOPPED_EVENTID, 1271 1272 /* peer specific events */ 1273 WMI_10X_PEER_STA_KICKOUT_EVENTID, 1274 1275 /* beacon/mgmt specific events */ 1276 WMI_10X_HOST_SWBA_EVENTID, 1277 WMI_10X_TBTTOFFSET_UPDATE_EVENTID, 1278 WMI_10X_MGMT_RX_EVENTID, 1279 1280 /* Channel stats event */ 1281 WMI_10X_CHAN_INFO_EVENTID, 1282 1283 /* PHY Error specific WMI event */ 1284 WMI_10X_PHYERR_EVENTID, 1285 1286 /* Roam event to trigger roaming on host */ 1287 WMI_10X_ROAM_EVENTID, 1288 1289 /* matching AP found from list of profiles */ 1290 WMI_10X_PROFILE_MATCH, 1291 1292 /* debug print message used for tracing FW code while debugging */ 1293 WMI_10X_DEBUG_PRINT_EVENTID, 1294 /* VI spoecific event */ 1295 WMI_10X_PDEV_QVIT_EVENTID, 1296 /* FW code profile data in response to profile request */ 1297 WMI_10X_WLAN_PROFILE_DATA_EVENTID, 1298 1299 /*RTT related event ID*/ 1300 WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID, 1301 WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID, 1302 WMI_10X_RTT_ERROR_REPORT_EVENTID, 1303 1304 WMI_10X_WOW_WAKEUP_HOST_EVENTID, 1305 WMI_10X_DCS_INTERFERENCE_EVENTID, 1306 1307 /* TPC config for the current operating channel */ 1308 WMI_10X_PDEV_TPC_CONFIG_EVENTID, 1309 1310 WMI_10X_GPIO_INPUT_EVENTID, 1311 WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID-1, 1312 }; 1313 1314 enum wmi_10_2_cmd_id { 1315 WMI_10_2_START_CMDID = 0x9000, 1316 WMI_10_2_END_CMDID = 0x9FFF, 1317 WMI_10_2_INIT_CMDID, 1318 WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID, 1319 WMI_10_2_STOP_SCAN_CMDID, 1320 WMI_10_2_SCAN_CHAN_LIST_CMDID, 1321 WMI_10_2_ECHO_CMDID, 1322 WMI_10_2_PDEV_SET_REGDOMAIN_CMDID, 1323 WMI_10_2_PDEV_SET_CHANNEL_CMDID, 1324 WMI_10_2_PDEV_SET_PARAM_CMDID, 1325 WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID, 1326 WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID, 1327 WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID, 1328 WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID, 1329 WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID, 1330 WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID, 1331 WMI_10_2_PDEV_SET_QUIET_MODE_CMDID, 1332 WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1333 WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID, 1334 WMI_10_2_VDEV_CREATE_CMDID, 1335 WMI_10_2_VDEV_DELETE_CMDID, 1336 WMI_10_2_VDEV_START_REQUEST_CMDID, 1337 WMI_10_2_VDEV_RESTART_REQUEST_CMDID, 1338 WMI_10_2_VDEV_UP_CMDID, 1339 WMI_10_2_VDEV_STOP_CMDID, 1340 WMI_10_2_VDEV_DOWN_CMDID, 1341 WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID, 1342 WMI_10_2_VDEV_RESUME_RESPONSE_CMDID, 1343 WMI_10_2_VDEV_SET_PARAM_CMDID, 1344 WMI_10_2_VDEV_INSTALL_KEY_CMDID, 1345 WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID, 1346 WMI_10_2_PEER_CREATE_CMDID, 1347 WMI_10_2_PEER_DELETE_CMDID, 1348 WMI_10_2_PEER_FLUSH_TIDS_CMDID, 1349 WMI_10_2_PEER_SET_PARAM_CMDID, 1350 WMI_10_2_PEER_ASSOC_CMDID, 1351 WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID, 1352 WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID, 1353 WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID, 1354 WMI_10_2_PEER_MCAST_GROUP_CMDID, 1355 WMI_10_2_BCN_TX_CMDID, 1356 WMI_10_2_BCN_PRB_TMPL_CMDID, 1357 WMI_10_2_BCN_FILTER_RX_CMDID, 1358 WMI_10_2_PRB_REQ_FILTER_RX_CMDID, 1359 WMI_10_2_MGMT_TX_CMDID, 1360 WMI_10_2_ADDBA_CLEAR_RESP_CMDID, 1361 WMI_10_2_ADDBA_SEND_CMDID, 1362 WMI_10_2_ADDBA_STATUS_CMDID, 1363 WMI_10_2_DELBA_SEND_CMDID, 1364 WMI_10_2_ADDBA_SET_RESP_CMDID, 1365 WMI_10_2_SEND_SINGLEAMSDU_CMDID, 1366 WMI_10_2_STA_POWERSAVE_MODE_CMDID, 1367 WMI_10_2_STA_POWERSAVE_PARAM_CMDID, 1368 WMI_10_2_STA_MIMO_PS_MODE_CMDID, 1369 WMI_10_2_DBGLOG_CFG_CMDID, 1370 WMI_10_2_PDEV_DFS_ENABLE_CMDID, 1371 WMI_10_2_PDEV_DFS_DISABLE_CMDID, 1372 WMI_10_2_PDEV_QVIT_CMDID, 1373 WMI_10_2_ROAM_SCAN_MODE, 1374 WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD, 1375 WMI_10_2_ROAM_SCAN_PERIOD, 1376 WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1377 WMI_10_2_ROAM_AP_PROFILE, 1378 WMI_10_2_OFL_SCAN_ADD_AP_PROFILE, 1379 WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE, 1380 WMI_10_2_OFL_SCAN_PERIOD, 1381 WMI_10_2_P2P_DEV_SET_DEVICE_INFO, 1382 WMI_10_2_P2P_DEV_SET_DISCOVERABILITY, 1383 WMI_10_2_P2P_GO_SET_BEACON_IE, 1384 WMI_10_2_P2P_GO_SET_PROBE_RESP_IE, 1385 WMI_10_2_AP_PS_PEER_PARAM_CMDID, 1386 WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID, 1387 WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID, 1388 WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID, 1389 WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1390 WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1391 WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1392 WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1393 WMI_10_2_PDEV_SUSPEND_CMDID, 1394 WMI_10_2_PDEV_RESUME_CMDID, 1395 WMI_10_2_ADD_BCN_FILTER_CMDID, 1396 WMI_10_2_RMV_BCN_FILTER_CMDID, 1397 WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID, 1398 WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID, 1399 WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1400 WMI_10_2_WOW_ENABLE_CMDID, 1401 WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1402 WMI_10_2_RTT_MEASREQ_CMDID, 1403 WMI_10_2_RTT_TSF_CMDID, 1404 WMI_10_2_RTT_KEEPALIVE_CMDID, 1405 WMI_10_2_PDEV_SEND_BCN_CMDID, 1406 WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1407 WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1408 WMI_10_2_REQUEST_STATS_CMDID, 1409 WMI_10_2_GPIO_CONFIG_CMDID, 1410 WMI_10_2_GPIO_OUTPUT_CMDID, 1411 WMI_10_2_VDEV_RATEMASK_CMDID, 1412 WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID, 1413 WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1414 WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1415 WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1416 WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1417 WMI_10_2_FORCE_FW_HANG_CMDID, 1418 WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1419 WMI_10_2_PDEV_SET_CTL_TABLE_CMDID, 1420 WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1421 WMI_10_2_PDEV_RATEPWR_TABLE_CMDID, 1422 WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1423 WMI_10_2_PDEV_GET_INFO, 1424 WMI_10_2_VDEV_GET_INFO, 1425 WMI_10_2_VDEV_ATF_REQUEST_CMDID, 1426 WMI_10_2_PEER_ATF_REQUEST_CMDID, 1427 WMI_10_2_PDEV_GET_TEMPERATURE_CMDID, 1428 WMI_10_2_MU_CAL_START_CMDID, 1429 WMI_10_2_SET_LTEU_CONFIG_CMDID, 1430 WMI_10_2_SET_CCA_PARAMS, 1431 WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1, 1432 }; 1433 1434 enum wmi_10_2_event_id { 1435 WMI_10_2_SERVICE_READY_EVENTID = 0x8000, 1436 WMI_10_2_READY_EVENTID, 1437 WMI_10_2_DEBUG_MESG_EVENTID, 1438 WMI_10_2_START_EVENTID = 0x9000, 1439 WMI_10_2_END_EVENTID = 0x9FFF, 1440 WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID, 1441 WMI_10_2_ECHO_EVENTID, 1442 WMI_10_2_UPDATE_STATS_EVENTID, 1443 WMI_10_2_INST_RSSI_STATS_EVENTID, 1444 WMI_10_2_VDEV_START_RESP_EVENTID, 1445 WMI_10_2_VDEV_STANDBY_REQ_EVENTID, 1446 WMI_10_2_VDEV_RESUME_REQ_EVENTID, 1447 WMI_10_2_VDEV_STOPPED_EVENTID, 1448 WMI_10_2_PEER_STA_KICKOUT_EVENTID, 1449 WMI_10_2_HOST_SWBA_EVENTID, 1450 WMI_10_2_TBTTOFFSET_UPDATE_EVENTID, 1451 WMI_10_2_MGMT_RX_EVENTID, 1452 WMI_10_2_CHAN_INFO_EVENTID, 1453 WMI_10_2_PHYERR_EVENTID, 1454 WMI_10_2_ROAM_EVENTID, 1455 WMI_10_2_PROFILE_MATCH, 1456 WMI_10_2_DEBUG_PRINT_EVENTID, 1457 WMI_10_2_PDEV_QVIT_EVENTID, 1458 WMI_10_2_WLAN_PROFILE_DATA_EVENTID, 1459 WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID, 1460 WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID, 1461 WMI_10_2_RTT_ERROR_REPORT_EVENTID, 1462 WMI_10_2_RTT_KEEPALIVE_EVENTID, 1463 WMI_10_2_WOW_WAKEUP_HOST_EVENTID, 1464 WMI_10_2_DCS_INTERFERENCE_EVENTID, 1465 WMI_10_2_PDEV_TPC_CONFIG_EVENTID, 1466 WMI_10_2_GPIO_INPUT_EVENTID, 1467 WMI_10_2_PEER_RATECODE_LIST_EVENTID, 1468 WMI_10_2_GENERIC_BUFFER_EVENTID, 1469 WMI_10_2_MCAST_BUF_RELEASE_EVENTID, 1470 WMI_10_2_MCAST_LIST_AGEOUT_EVENTID, 1471 WMI_10_2_WDS_PEER_EVENTID, 1472 WMI_10_2_PEER_STA_PS_STATECHG_EVENTID, 1473 WMI_10_2_PDEV_TEMPERATURE_EVENTID, 1474 WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1, 1475 }; 1476 1477 enum wmi_10_4_cmd_id { 1478 WMI_10_4_START_CMDID = 0x9000, 1479 WMI_10_4_END_CMDID = 0x9FFF, 1480 WMI_10_4_INIT_CMDID, 1481 WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID, 1482 WMI_10_4_STOP_SCAN_CMDID, 1483 WMI_10_4_SCAN_CHAN_LIST_CMDID, 1484 WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID, 1485 WMI_10_4_SCAN_UPDATE_REQUEST_CMDID, 1486 WMI_10_4_ECHO_CMDID, 1487 WMI_10_4_PDEV_SET_REGDOMAIN_CMDID, 1488 WMI_10_4_PDEV_SET_CHANNEL_CMDID, 1489 WMI_10_4_PDEV_SET_PARAM_CMDID, 1490 WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID, 1491 WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID, 1492 WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID, 1493 WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID, 1494 WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID, 1495 WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID, 1496 WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID, 1497 WMI_10_4_PDEV_SET_QUIET_MODE_CMDID, 1498 WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1499 WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID, 1500 WMI_10_4_VDEV_CREATE_CMDID, 1501 WMI_10_4_VDEV_DELETE_CMDID, 1502 WMI_10_4_VDEV_START_REQUEST_CMDID, 1503 WMI_10_4_VDEV_RESTART_REQUEST_CMDID, 1504 WMI_10_4_VDEV_UP_CMDID, 1505 WMI_10_4_VDEV_STOP_CMDID, 1506 WMI_10_4_VDEV_DOWN_CMDID, 1507 WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID, 1508 WMI_10_4_VDEV_RESUME_RESPONSE_CMDID, 1509 WMI_10_4_VDEV_SET_PARAM_CMDID, 1510 WMI_10_4_VDEV_INSTALL_KEY_CMDID, 1511 WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID, 1512 WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID, 1513 WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID, 1514 WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID, 1515 WMI_10_4_PEER_CREATE_CMDID, 1516 WMI_10_4_PEER_DELETE_CMDID, 1517 WMI_10_4_PEER_FLUSH_TIDS_CMDID, 1518 WMI_10_4_PEER_SET_PARAM_CMDID, 1519 WMI_10_4_PEER_ASSOC_CMDID, 1520 WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID, 1521 WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID, 1522 WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID, 1523 WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID, 1524 WMI_10_4_PEER_MCAST_GROUP_CMDID, 1525 WMI_10_4_BCN_TX_CMDID, 1526 WMI_10_4_PDEV_SEND_BCN_CMDID, 1527 WMI_10_4_BCN_PRB_TMPL_CMDID, 1528 WMI_10_4_BCN_FILTER_RX_CMDID, 1529 WMI_10_4_PRB_REQ_FILTER_RX_CMDID, 1530 WMI_10_4_MGMT_TX_CMDID, 1531 WMI_10_4_PRB_TMPL_CMDID, 1532 WMI_10_4_ADDBA_CLEAR_RESP_CMDID, 1533 WMI_10_4_ADDBA_SEND_CMDID, 1534 WMI_10_4_ADDBA_STATUS_CMDID, 1535 WMI_10_4_DELBA_SEND_CMDID, 1536 WMI_10_4_ADDBA_SET_RESP_CMDID, 1537 WMI_10_4_SEND_SINGLEAMSDU_CMDID, 1538 WMI_10_4_STA_POWERSAVE_MODE_CMDID, 1539 WMI_10_4_STA_POWERSAVE_PARAM_CMDID, 1540 WMI_10_4_STA_MIMO_PS_MODE_CMDID, 1541 WMI_10_4_DBGLOG_CFG_CMDID, 1542 WMI_10_4_PDEV_DFS_ENABLE_CMDID, 1543 WMI_10_4_PDEV_DFS_DISABLE_CMDID, 1544 WMI_10_4_PDEV_QVIT_CMDID, 1545 WMI_10_4_ROAM_SCAN_MODE, 1546 WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD, 1547 WMI_10_4_ROAM_SCAN_PERIOD, 1548 WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1549 WMI_10_4_ROAM_AP_PROFILE, 1550 WMI_10_4_OFL_SCAN_ADD_AP_PROFILE, 1551 WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE, 1552 WMI_10_4_OFL_SCAN_PERIOD, 1553 WMI_10_4_P2P_DEV_SET_DEVICE_INFO, 1554 WMI_10_4_P2P_DEV_SET_DISCOVERABILITY, 1555 WMI_10_4_P2P_GO_SET_BEACON_IE, 1556 WMI_10_4_P2P_GO_SET_PROBE_RESP_IE, 1557 WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID, 1558 WMI_10_4_AP_PS_PEER_PARAM_CMDID, 1559 WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID, 1560 WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID, 1561 WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID, 1562 WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1563 WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1564 WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1565 WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1566 WMI_10_4_PDEV_SUSPEND_CMDID, 1567 WMI_10_4_PDEV_RESUME_CMDID, 1568 WMI_10_4_ADD_BCN_FILTER_CMDID, 1569 WMI_10_4_RMV_BCN_FILTER_CMDID, 1570 WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID, 1571 WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID, 1572 WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1573 WMI_10_4_WOW_ENABLE_CMDID, 1574 WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1575 WMI_10_4_RTT_MEASREQ_CMDID, 1576 WMI_10_4_RTT_TSF_CMDID, 1577 WMI_10_4_RTT_KEEPALIVE_CMDID, 1578 WMI_10_4_OEM_REQ_CMDID, 1579 WMI_10_4_NAN_CMDID, 1580 WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1581 WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1582 WMI_10_4_REQUEST_STATS_CMDID, 1583 WMI_10_4_GPIO_CONFIG_CMDID, 1584 WMI_10_4_GPIO_OUTPUT_CMDID, 1585 WMI_10_4_VDEV_RATEMASK_CMDID, 1586 WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID, 1587 WMI_10_4_GTK_OFFLOAD_CMDID, 1588 WMI_10_4_QBOOST_CFG_CMDID, 1589 WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID, 1590 WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID, 1591 WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1592 WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1593 WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1594 WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1595 WMI_10_4_VDEV_SET_KEEPALIVE_CMDID, 1596 WMI_10_4_VDEV_GET_KEEPALIVE_CMDID, 1597 WMI_10_4_FORCE_FW_HANG_CMDID, 1598 WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1599 WMI_10_4_PDEV_SET_CTL_TABLE_CMDID, 1600 WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1601 WMI_10_4_PDEV_RATEPWR_TABLE_CMDID, 1602 WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1603 WMI_10_4_PDEV_FIPS_CMDID, 1604 WMI_10_4_TT_SET_CONF_CMDID, 1605 WMI_10_4_FWTEST_CMDID, 1606 WMI_10_4_VDEV_ATF_REQUEST_CMDID, 1607 WMI_10_4_PEER_ATF_REQUEST_CMDID, 1608 WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID, 1609 WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID, 1610 WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID, 1611 WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID, 1612 WMI_10_4_PDEV_GET_TPC_CMDID, 1613 WMI_10_4_PDEV_GET_AST_INFO_CMDID, 1614 WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID, 1615 WMI_10_4_PDEV_GET_TEMPERATURE_CMDID, 1616 WMI_10_4_PDEV_GET_INFO_CMDID, 1617 WMI_10_4_VDEV_GET_INFO_CMDID, 1618 WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID, 1619 WMI_10_4_MU_CAL_START_CMDID, 1620 WMI_10_4_SET_CCA_PARAMS_CMDID, 1621 WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1622 WMI_10_4_EXT_RESOURCE_CFG_CMDID, 1623 WMI_10_4_VDEV_SET_IE_CMDID, 1624 WMI_10_4_SET_LTEU_CONFIG_CMDID, 1625 WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1, 1626 }; 1627 1628 enum wmi_10_4_event_id { 1629 WMI_10_4_SERVICE_READY_EVENTID = 0x8000, 1630 WMI_10_4_READY_EVENTID, 1631 WMI_10_4_DEBUG_MESG_EVENTID, 1632 WMI_10_4_START_EVENTID = 0x9000, 1633 WMI_10_4_END_EVENTID = 0x9FFF, 1634 WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID, 1635 WMI_10_4_ECHO_EVENTID, 1636 WMI_10_4_UPDATE_STATS_EVENTID, 1637 WMI_10_4_INST_RSSI_STATS_EVENTID, 1638 WMI_10_4_VDEV_START_RESP_EVENTID, 1639 WMI_10_4_VDEV_STANDBY_REQ_EVENTID, 1640 WMI_10_4_VDEV_RESUME_REQ_EVENTID, 1641 WMI_10_4_VDEV_STOPPED_EVENTID, 1642 WMI_10_4_PEER_STA_KICKOUT_EVENTID, 1643 WMI_10_4_HOST_SWBA_EVENTID, 1644 WMI_10_4_TBTTOFFSET_UPDATE_EVENTID, 1645 WMI_10_4_MGMT_RX_EVENTID, 1646 WMI_10_4_CHAN_INFO_EVENTID, 1647 WMI_10_4_PHYERR_EVENTID, 1648 WMI_10_4_ROAM_EVENTID, 1649 WMI_10_4_PROFILE_MATCH, 1650 WMI_10_4_DEBUG_PRINT_EVENTID, 1651 WMI_10_4_PDEV_QVIT_EVENTID, 1652 WMI_10_4_WLAN_PROFILE_DATA_EVENTID, 1653 WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID, 1654 WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID, 1655 WMI_10_4_RTT_ERROR_REPORT_EVENTID, 1656 WMI_10_4_RTT_KEEPALIVE_EVENTID, 1657 WMI_10_4_OEM_CAPABILITY_EVENTID, 1658 WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID, 1659 WMI_10_4_OEM_ERROR_REPORT_EVENTID, 1660 WMI_10_4_NAN_EVENTID, 1661 WMI_10_4_WOW_WAKEUP_HOST_EVENTID, 1662 WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID, 1663 WMI_10_4_GTK_REKEY_FAIL_EVENTID, 1664 WMI_10_4_DCS_INTERFERENCE_EVENTID, 1665 WMI_10_4_PDEV_TPC_CONFIG_EVENTID, 1666 WMI_10_4_CSA_HANDLING_EVENTID, 1667 WMI_10_4_GPIO_INPUT_EVENTID, 1668 WMI_10_4_PEER_RATECODE_LIST_EVENTID, 1669 WMI_10_4_GENERIC_BUFFER_EVENTID, 1670 WMI_10_4_MCAST_BUF_RELEASE_EVENTID, 1671 WMI_10_4_MCAST_LIST_AGEOUT_EVENTID, 1672 WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID, 1673 WMI_10_4_WDS_PEER_EVENTID, 1674 WMI_10_4_PEER_STA_PS_STATECHG_EVENTID, 1675 WMI_10_4_PDEV_FIPS_EVENTID, 1676 WMI_10_4_TT_STATS_EVENTID, 1677 WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID, 1678 WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID, 1679 WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID, 1680 WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID, 1681 WMI_10_4_PDEV_NFCAL_POWER_EVENTID, 1682 WMI_10_4_PDEV_TPC_EVENTID, 1683 WMI_10_4_PDEV_GET_AST_INFO_EVENTID, 1684 WMI_10_4_PDEV_TEMPERATURE_EVENTID, 1685 WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID, 1686 WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID, 1687 WMI_10_4_MU_REPORT_EVENTID, 1688 WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1, 1689 }; 1690 1691 enum wmi_phy_mode { 1692 MODE_11A = 0, /* 11a Mode */ 1693 MODE_11G = 1, /* 11b/g Mode */ 1694 MODE_11B = 2, /* 11b Mode */ 1695 MODE_11GONLY = 3, /* 11g only Mode */ 1696 MODE_11NA_HT20 = 4, /* 11a HT20 mode */ 1697 MODE_11NG_HT20 = 5, /* 11g HT20 mode */ 1698 MODE_11NA_HT40 = 6, /* 11a HT40 mode */ 1699 MODE_11NG_HT40 = 7, /* 11g HT40 mode */ 1700 MODE_11AC_VHT20 = 8, 1701 MODE_11AC_VHT40 = 9, 1702 MODE_11AC_VHT80 = 10, 1703 /* MODE_11AC_VHT160 = 11, */ 1704 MODE_11AC_VHT20_2G = 11, 1705 MODE_11AC_VHT40_2G = 12, 1706 MODE_11AC_VHT80_2G = 13, 1707 MODE_UNKNOWN = 14, 1708 MODE_MAX = 14 1709 }; 1710 1711 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode) 1712 { 1713 switch (mode) { 1714 case MODE_11A: 1715 return "11a"; 1716 case MODE_11G: 1717 return "11g"; 1718 case MODE_11B: 1719 return "11b"; 1720 case MODE_11GONLY: 1721 return "11gonly"; 1722 case MODE_11NA_HT20: 1723 return "11na-ht20"; 1724 case MODE_11NG_HT20: 1725 return "11ng-ht20"; 1726 case MODE_11NA_HT40: 1727 return "11na-ht40"; 1728 case MODE_11NG_HT40: 1729 return "11ng-ht40"; 1730 case MODE_11AC_VHT20: 1731 return "11ac-vht20"; 1732 case MODE_11AC_VHT40: 1733 return "11ac-vht40"; 1734 case MODE_11AC_VHT80: 1735 return "11ac-vht80"; 1736 case MODE_11AC_VHT20_2G: 1737 return "11ac-vht20-2g"; 1738 case MODE_11AC_VHT40_2G: 1739 return "11ac-vht40-2g"; 1740 case MODE_11AC_VHT80_2G: 1741 return "11ac-vht80-2g"; 1742 case MODE_UNKNOWN: 1743 /* skip */ 1744 break; 1745 1746 /* no default handler to allow compiler to check that the 1747 * enum is fully handled */ 1748 }; 1749 1750 return "<unknown>"; 1751 } 1752 1753 #define WMI_CHAN_LIST_TAG 0x1 1754 #define WMI_SSID_LIST_TAG 0x2 1755 #define WMI_BSSID_LIST_TAG 0x3 1756 #define WMI_IE_TAG 0x4 1757 1758 struct wmi_channel { 1759 __le32 mhz; 1760 __le32 band_center_freq1; 1761 __le32 band_center_freq2; /* valid for 11ac, 80plus80 */ 1762 union { 1763 __le32 flags; /* WMI_CHAN_FLAG_ */ 1764 struct { 1765 u8 mode; /* only 6 LSBs */ 1766 } __packed; 1767 } __packed; 1768 union { 1769 __le32 reginfo0; 1770 struct { 1771 /* note: power unit is 0.5 dBm */ 1772 u8 min_power; 1773 u8 max_power; 1774 u8 reg_power; 1775 u8 reg_classid; 1776 } __packed; 1777 } __packed; 1778 union { 1779 __le32 reginfo1; 1780 struct { 1781 u8 antenna_max; 1782 } __packed; 1783 } __packed; 1784 } __packed; 1785 1786 struct wmi_channel_arg { 1787 u32 freq; 1788 u32 band_center_freq1; 1789 bool passive; 1790 bool allow_ibss; 1791 bool allow_ht; 1792 bool allow_vht; 1793 bool ht40plus; 1794 bool chan_radar; 1795 /* note: power unit is 0.5 dBm */ 1796 u32 min_power; 1797 u32 max_power; 1798 u32 max_reg_power; 1799 u32 max_antenna_gain; 1800 u32 reg_class_id; 1801 enum wmi_phy_mode mode; 1802 }; 1803 1804 enum wmi_channel_change_cause { 1805 WMI_CHANNEL_CHANGE_CAUSE_NONE = 0, 1806 WMI_CHANNEL_CHANGE_CAUSE_CSA, 1807 }; 1808 1809 #define WMI_CHAN_FLAG_HT40_PLUS (1 << 6) 1810 #define WMI_CHAN_FLAG_PASSIVE (1 << 7) 1811 #define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8) 1812 #define WMI_CHAN_FLAG_AP_DISABLED (1 << 9) 1813 #define WMI_CHAN_FLAG_DFS (1 << 10) 1814 #define WMI_CHAN_FLAG_ALLOW_HT (1 << 11) 1815 #define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12) 1816 1817 /* Indicate reason for channel switch */ 1818 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13) 1819 1820 #define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */ 1821 1822 /* HT Capabilities*/ 1823 #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ 1824 #define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */ 1825 #define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ 1826 #define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ 1827 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3 1828 #define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ 1829 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4 1830 #define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */ 1831 #define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ 1832 #define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ 1833 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 1834 #define WMI_HT_CAP_HT40_SGI 0x0800 1835 1836 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \ 1837 WMI_HT_CAP_HT20_SGI | \ 1838 WMI_HT_CAP_HT40_SGI | \ 1839 WMI_HT_CAP_TX_STBC | \ 1840 WMI_HT_CAP_RX_STBC | \ 1841 WMI_HT_CAP_LDPC) 1842 1843 /* 1844 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information 1845 * field. The fields not defined here are not supported, or reserved. 1846 * Do not change these masks and if you have to add new one follow the 1847 * bitmask as specified by 802.11ac draft. 1848 */ 1849 1850 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 1851 #define WMI_VHT_CAP_RX_LDPC 0x00000010 1852 #define WMI_VHT_CAP_SGI_80MHZ 0x00000020 1853 #define WMI_VHT_CAP_TX_STBC 0x00000080 1854 #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300 1855 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8 1856 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 1857 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23 1858 #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000 1859 #define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000 1860 1861 /* The following also refer for max HT AMSDU */ 1862 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000 1863 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001 1864 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 1865 1866 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \ 1867 WMI_VHT_CAP_RX_LDPC | \ 1868 WMI_VHT_CAP_SGI_80MHZ | \ 1869 WMI_VHT_CAP_TX_STBC | \ 1870 WMI_VHT_CAP_RX_STBC_MASK | \ 1871 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \ 1872 WMI_VHT_CAP_RX_FIXED_ANT | \ 1873 WMI_VHT_CAP_TX_FIXED_ANT) 1874 1875 /* 1876 * Interested readers refer to Rx/Tx MCS Map definition as defined in 1877 * 802.11ac 1878 */ 1879 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) 1880 #define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 1881 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 1882 1883 enum { 1884 REGDMN_MODE_11A = 0x00001, /* 11a channels */ 1885 REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */ 1886 REGDMN_MODE_11B = 0x00004, /* 11b channels */ 1887 REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */ 1888 REGDMN_MODE_11G = 0x00008, /* XXX historical */ 1889 REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */ 1890 REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */ 1891 REGDMN_MODE_XR = 0x00100, /* XR channels */ 1892 REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */ 1893 REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */ 1894 REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */ 1895 REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */ 1896 REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */ 1897 REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */ 1898 REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */ 1899 REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */ 1900 REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */ 1901 REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */ 1902 REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */ 1903 REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */ 1904 REGDMN_MODE_ALL = 0xffffffff 1905 }; 1906 1907 #define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001 1908 #define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002 1909 #define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004 1910 1911 /* regulatory capabilities */ 1912 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040 1913 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080 1914 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100 1915 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200 1916 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400 1917 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800 1918 1919 struct hal_reg_capabilities { 1920 /* regdomain value specified in EEPROM */ 1921 __le32 eeprom_rd; 1922 /*regdomain */ 1923 __le32 eeprom_rd_ext; 1924 /* CAP1 capabilities bit map. */ 1925 __le32 regcap1; 1926 /* REGDMN EEPROM CAP. */ 1927 __le32 regcap2; 1928 /* REGDMN MODE */ 1929 __le32 wireless_modes; 1930 __le32 low_2ghz_chan; 1931 __le32 high_2ghz_chan; 1932 __le32 low_5ghz_chan; 1933 __le32 high_5ghz_chan; 1934 } __packed; 1935 1936 enum wlan_mode_capability { 1937 WHAL_WLAN_11A_CAPABILITY = 0x1, 1938 WHAL_WLAN_11G_CAPABILITY = 0x2, 1939 WHAL_WLAN_11AG_CAPABILITY = 0x3, 1940 }; 1941 1942 /* structure used by FW for requesting host memory */ 1943 struct wlan_host_mem_req { 1944 /* ID of the request */ 1945 __le32 req_id; 1946 /* size of the of each unit */ 1947 __le32 unit_size; 1948 /* flags to indicate that 1949 * the number units is dependent 1950 * on number of resources(num vdevs num peers .. etc) 1951 */ 1952 __le32 num_unit_info; 1953 /* 1954 * actual number of units to allocate . if flags in the num_unit_info 1955 * indicate that number of units is tied to number of a particular 1956 * resource to allocate then num_units filed is set to 0 and host 1957 * will derive the number units from number of the resources it is 1958 * requesting. 1959 */ 1960 __le32 num_units; 1961 } __packed; 1962 1963 /* 1964 * The following struct holds optional payload for 1965 * wmi_service_ready_event,e.g., 11ac pass some of the 1966 * device capability to the host. 1967 */ 1968 struct wmi_service_ready_event { 1969 __le32 sw_version; 1970 __le32 sw_version_1; 1971 __le32 abi_version; 1972 /* WMI_PHY_CAPABILITY */ 1973 __le32 phy_capability; 1974 /* Maximum number of frag table entries that SW will populate less 1 */ 1975 __le32 max_frag_entry; 1976 __le32 wmi_service_bitmap[16]; 1977 __le32 num_rf_chains; 1978 /* 1979 * The following field is only valid for service type 1980 * WMI_SERVICE_11AC 1981 */ 1982 __le32 ht_cap_info; /* WMI HT Capability */ 1983 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 1984 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 1985 __le32 hw_min_tx_power; 1986 __le32 hw_max_tx_power; 1987 struct hal_reg_capabilities hal_reg_capabilities; 1988 __le32 sys_cap_info; 1989 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 1990 /* 1991 * Max beacon and Probe Response IE offload size 1992 * (includes optional P2P IEs) 1993 */ 1994 __le32 max_bcn_ie_size; 1995 /* 1996 * request to host to allocate a chuck of memory and pss it down to FW 1997 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 1998 * data structures. Only valid for low latency interfaces like PCIE 1999 * where FW can access this memory directly (or) by DMA. 2000 */ 2001 __le32 num_mem_reqs; 2002 struct wlan_host_mem_req mem_reqs[0]; 2003 } __packed; 2004 2005 /* This is the definition from 10.X firmware branch */ 2006 struct wmi_10x_service_ready_event { 2007 __le32 sw_version; 2008 __le32 abi_version; 2009 2010 /* WMI_PHY_CAPABILITY */ 2011 __le32 phy_capability; 2012 2013 /* Maximum number of frag table entries that SW will populate less 1 */ 2014 __le32 max_frag_entry; 2015 __le32 wmi_service_bitmap[16]; 2016 __le32 num_rf_chains; 2017 2018 /* 2019 * The following field is only valid for service type 2020 * WMI_SERVICE_11AC 2021 */ 2022 __le32 ht_cap_info; /* WMI HT Capability */ 2023 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2024 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2025 __le32 hw_min_tx_power; 2026 __le32 hw_max_tx_power; 2027 2028 struct hal_reg_capabilities hal_reg_capabilities; 2029 2030 __le32 sys_cap_info; 2031 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2032 2033 /* 2034 * request to host to allocate a chuck of memory and pss it down to FW 2035 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2036 * data structures. Only valid for low latency interfaces like PCIE 2037 * where FW can access this memory directly (or) by DMA. 2038 */ 2039 __le32 num_mem_reqs; 2040 2041 struct wlan_host_mem_req mem_reqs[0]; 2042 } __packed; 2043 2044 #define WMI_SERVICE_READY_TIMEOUT_HZ (5*HZ) 2045 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5*HZ) 2046 2047 struct wmi_ready_event { 2048 __le32 sw_version; 2049 __le32 abi_version; 2050 struct wmi_mac_addr mac_addr; 2051 __le32 status; 2052 } __packed; 2053 2054 struct wmi_resource_config { 2055 /* number of virtual devices (VAPs) to support */ 2056 __le32 num_vdevs; 2057 2058 /* number of peer nodes to support */ 2059 __le32 num_peers; 2060 2061 /* 2062 * In offload mode target supports features like WOW, chatter and 2063 * other protocol offloads. In order to support them some 2064 * functionalities like reorder buffering, PN checking need to be 2065 * done in target. This determines maximum number of peers suported 2066 * by target in offload mode 2067 */ 2068 __le32 num_offload_peers; 2069 2070 /* For target-based RX reordering */ 2071 __le32 num_offload_reorder_bufs; 2072 2073 /* number of keys per peer */ 2074 __le32 num_peer_keys; 2075 2076 /* total number of TX/RX data TIDs */ 2077 __le32 num_tids; 2078 2079 /* 2080 * max skid for resolving hash collisions 2081 * 2082 * The address search table is sparse, so that if two MAC addresses 2083 * result in the same hash value, the second of these conflicting 2084 * entries can slide to the next index in the address search table, 2085 * and use it, if it is unoccupied. This ast_skid_limit parameter 2086 * specifies the upper bound on how many subsequent indices to search 2087 * over to find an unoccupied space. 2088 */ 2089 __le32 ast_skid_limit; 2090 2091 /* 2092 * the nominal chain mask for transmit 2093 * 2094 * The chain mask may be modified dynamically, e.g. to operate AP 2095 * tx with a reduced number of chains if no clients are associated. 2096 * This configuration parameter specifies the nominal chain-mask that 2097 * should be used when not operating with a reduced set of tx chains. 2098 */ 2099 __le32 tx_chain_mask; 2100 2101 /* 2102 * the nominal chain mask for receive 2103 * 2104 * The chain mask may be modified dynamically, e.g. for a client 2105 * to use a reduced number of chains for receive if the traffic to 2106 * the client is low enough that it doesn't require downlink MIMO 2107 * or antenna diversity. 2108 * This configuration parameter specifies the nominal chain-mask that 2109 * should be used when not operating with a reduced set of rx chains. 2110 */ 2111 __le32 rx_chain_mask; 2112 2113 /* 2114 * what rx reorder timeout (ms) to use for the AC 2115 * 2116 * Each WMM access class (voice, video, best-effort, background) will 2117 * have its own timeout value to dictate how long to wait for missing 2118 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2119 * already been received. 2120 * This parameter specifies the timeout in milliseconds for each 2121 * class. 2122 */ 2123 __le32 rx_timeout_pri_vi; 2124 __le32 rx_timeout_pri_vo; 2125 __le32 rx_timeout_pri_be; 2126 __le32 rx_timeout_pri_bk; 2127 2128 /* 2129 * what mode the rx should decap packets to 2130 * 2131 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2132 * THis setting also determines the default TX behavior, however TX 2133 * behavior can be modified on a per VAP basis during VAP init 2134 */ 2135 __le32 rx_decap_mode; 2136 2137 /* what is the maximum number of scan requests that can be queued */ 2138 __le32 scan_max_pending_reqs; 2139 2140 /* maximum VDEV that could use BMISS offload */ 2141 __le32 bmiss_offload_max_vdev; 2142 2143 /* maximum VDEV that could use offload roaming */ 2144 __le32 roam_offload_max_vdev; 2145 2146 /* maximum AP profiles that would push to offload roaming */ 2147 __le32 roam_offload_max_ap_profiles; 2148 2149 /* 2150 * how many groups to use for mcast->ucast conversion 2151 * 2152 * The target's WAL maintains a table to hold information regarding 2153 * which peers belong to a given multicast group, so that if 2154 * multicast->unicast conversion is enabled, the target can convert 2155 * multicast tx frames to a series of unicast tx frames, to each 2156 * peer within the multicast group. 2157 This num_mcast_groups configuration parameter tells the target how 2158 * many multicast groups to provide storage for within its multicast 2159 * group membership table. 2160 */ 2161 __le32 num_mcast_groups; 2162 2163 /* 2164 * size to alloc for the mcast membership table 2165 * 2166 * This num_mcast_table_elems configuration parameter tells the 2167 * target how many peer elements it needs to provide storage for in 2168 * its multicast group membership table. 2169 * These multicast group membership table elements are shared by the 2170 * multicast groups stored within the table. 2171 */ 2172 __le32 num_mcast_table_elems; 2173 2174 /* 2175 * whether/how to do multicast->unicast conversion 2176 * 2177 * This configuration parameter specifies whether the target should 2178 * perform multicast --> unicast conversion on transmit, and if so, 2179 * what to do if it finds no entries in its multicast group 2180 * membership table for the multicast IP address in the tx frame. 2181 * Configuration value: 2182 * 0 -> Do not perform multicast to unicast conversion. 2183 * 1 -> Convert multicast frames to unicast, if the IP multicast 2184 * address from the tx frame is found in the multicast group 2185 * membership table. If the IP multicast address is not found, 2186 * drop the frame. 2187 * 2 -> Convert multicast frames to unicast, if the IP multicast 2188 * address from the tx frame is found in the multicast group 2189 * membership table. If the IP multicast address is not found, 2190 * transmit the frame as multicast. 2191 */ 2192 __le32 mcast2ucast_mode; 2193 2194 /* 2195 * how much memory to allocate for a tx PPDU dbg log 2196 * 2197 * This parameter controls how much memory the target will allocate 2198 * to store a log of tx PPDU meta-information (how large the PPDU 2199 * was, when it was sent, whether it was successful, etc.) 2200 */ 2201 __le32 tx_dbg_log_size; 2202 2203 /* how many AST entries to be allocated for WDS */ 2204 __le32 num_wds_entries; 2205 2206 /* 2207 * MAC DMA burst size, e.g., For target PCI limit can be 2208 * 0 -default, 1 256B 2209 */ 2210 __le32 dma_burst_size; 2211 2212 /* 2213 * Fixed delimiters to be inserted after every MPDU to 2214 * account for interface latency to avoid underrun. 2215 */ 2216 __le32 mac_aggr_delim; 2217 2218 /* 2219 * determine whether target is responsible for detecting duplicate 2220 * non-aggregate MPDU and timing out stale fragments. 2221 * 2222 * A-MPDU reordering is always performed on the target. 2223 * 2224 * 0: target responsible for frag timeout and dup checking 2225 * 1: host responsible for frag timeout and dup checking 2226 */ 2227 __le32 rx_skip_defrag_timeout_dup_detection_check; 2228 2229 /* 2230 * Configuration for VoW : 2231 * No of Video Nodes to be supported 2232 * and Max no of descriptors for each Video link (node). 2233 */ 2234 __le32 vow_config; 2235 2236 /* maximum VDEV that could use GTK offload */ 2237 __le32 gtk_offload_max_vdev; 2238 2239 /* Number of msdu descriptors target should use */ 2240 __le32 num_msdu_desc; 2241 2242 /* 2243 * Max. number of Tx fragments per MSDU 2244 * This parameter controls the max number of Tx fragments per MSDU. 2245 * This is sent by the target as part of the WMI_SERVICE_READY event 2246 * and is overriden by the OS shim as required. 2247 */ 2248 __le32 max_frag_entries; 2249 } __packed; 2250 2251 struct wmi_resource_config_10x { 2252 /* number of virtual devices (VAPs) to support */ 2253 __le32 num_vdevs; 2254 2255 /* number of peer nodes to support */ 2256 __le32 num_peers; 2257 2258 /* number of keys per peer */ 2259 __le32 num_peer_keys; 2260 2261 /* total number of TX/RX data TIDs */ 2262 __le32 num_tids; 2263 2264 /* 2265 * max skid for resolving hash collisions 2266 * 2267 * The address search table is sparse, so that if two MAC addresses 2268 * result in the same hash value, the second of these conflicting 2269 * entries can slide to the next index in the address search table, 2270 * and use it, if it is unoccupied. This ast_skid_limit parameter 2271 * specifies the upper bound on how many subsequent indices to search 2272 * over to find an unoccupied space. 2273 */ 2274 __le32 ast_skid_limit; 2275 2276 /* 2277 * the nominal chain mask for transmit 2278 * 2279 * The chain mask may be modified dynamically, e.g. to operate AP 2280 * tx with a reduced number of chains if no clients are associated. 2281 * This configuration parameter specifies the nominal chain-mask that 2282 * should be used when not operating with a reduced set of tx chains. 2283 */ 2284 __le32 tx_chain_mask; 2285 2286 /* 2287 * the nominal chain mask for receive 2288 * 2289 * The chain mask may be modified dynamically, e.g. for a client 2290 * to use a reduced number of chains for receive if the traffic to 2291 * the client is low enough that it doesn't require downlink MIMO 2292 * or antenna diversity. 2293 * This configuration parameter specifies the nominal chain-mask that 2294 * should be used when not operating with a reduced set of rx chains. 2295 */ 2296 __le32 rx_chain_mask; 2297 2298 /* 2299 * what rx reorder timeout (ms) to use for the AC 2300 * 2301 * Each WMM access class (voice, video, best-effort, background) will 2302 * have its own timeout value to dictate how long to wait for missing 2303 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2304 * already been received. 2305 * This parameter specifies the timeout in milliseconds for each 2306 * class. 2307 */ 2308 __le32 rx_timeout_pri_vi; 2309 __le32 rx_timeout_pri_vo; 2310 __le32 rx_timeout_pri_be; 2311 __le32 rx_timeout_pri_bk; 2312 2313 /* 2314 * what mode the rx should decap packets to 2315 * 2316 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2317 * THis setting also determines the default TX behavior, however TX 2318 * behavior can be modified on a per VAP basis during VAP init 2319 */ 2320 __le32 rx_decap_mode; 2321 2322 /* what is the maximum number of scan requests that can be queued */ 2323 __le32 scan_max_pending_reqs; 2324 2325 /* maximum VDEV that could use BMISS offload */ 2326 __le32 bmiss_offload_max_vdev; 2327 2328 /* maximum VDEV that could use offload roaming */ 2329 __le32 roam_offload_max_vdev; 2330 2331 /* maximum AP profiles that would push to offload roaming */ 2332 __le32 roam_offload_max_ap_profiles; 2333 2334 /* 2335 * how many groups to use for mcast->ucast conversion 2336 * 2337 * The target's WAL maintains a table to hold information regarding 2338 * which peers belong to a given multicast group, so that if 2339 * multicast->unicast conversion is enabled, the target can convert 2340 * multicast tx frames to a series of unicast tx frames, to each 2341 * peer within the multicast group. 2342 This num_mcast_groups configuration parameter tells the target how 2343 * many multicast groups to provide storage for within its multicast 2344 * group membership table. 2345 */ 2346 __le32 num_mcast_groups; 2347 2348 /* 2349 * size to alloc for the mcast membership table 2350 * 2351 * This num_mcast_table_elems configuration parameter tells the 2352 * target how many peer elements it needs to provide storage for in 2353 * its multicast group membership table. 2354 * These multicast group membership table elements are shared by the 2355 * multicast groups stored within the table. 2356 */ 2357 __le32 num_mcast_table_elems; 2358 2359 /* 2360 * whether/how to do multicast->unicast conversion 2361 * 2362 * This configuration parameter specifies whether the target should 2363 * perform multicast --> unicast conversion on transmit, and if so, 2364 * what to do if it finds no entries in its multicast group 2365 * membership table for the multicast IP address in the tx frame. 2366 * Configuration value: 2367 * 0 -> Do not perform multicast to unicast conversion. 2368 * 1 -> Convert multicast frames to unicast, if the IP multicast 2369 * address from the tx frame is found in the multicast group 2370 * membership table. If the IP multicast address is not found, 2371 * drop the frame. 2372 * 2 -> Convert multicast frames to unicast, if the IP multicast 2373 * address from the tx frame is found in the multicast group 2374 * membership table. If the IP multicast address is not found, 2375 * transmit the frame as multicast. 2376 */ 2377 __le32 mcast2ucast_mode; 2378 2379 /* 2380 * how much memory to allocate for a tx PPDU dbg log 2381 * 2382 * This parameter controls how much memory the target will allocate 2383 * to store a log of tx PPDU meta-information (how large the PPDU 2384 * was, when it was sent, whether it was successful, etc.) 2385 */ 2386 __le32 tx_dbg_log_size; 2387 2388 /* how many AST entries to be allocated for WDS */ 2389 __le32 num_wds_entries; 2390 2391 /* 2392 * MAC DMA burst size, e.g., For target PCI limit can be 2393 * 0 -default, 1 256B 2394 */ 2395 __le32 dma_burst_size; 2396 2397 /* 2398 * Fixed delimiters to be inserted after every MPDU to 2399 * account for interface latency to avoid underrun. 2400 */ 2401 __le32 mac_aggr_delim; 2402 2403 /* 2404 * determine whether target is responsible for detecting duplicate 2405 * non-aggregate MPDU and timing out stale fragments. 2406 * 2407 * A-MPDU reordering is always performed on the target. 2408 * 2409 * 0: target responsible for frag timeout and dup checking 2410 * 1: host responsible for frag timeout and dup checking 2411 */ 2412 __le32 rx_skip_defrag_timeout_dup_detection_check; 2413 2414 /* 2415 * Configuration for VoW : 2416 * No of Video Nodes to be supported 2417 * and Max no of descriptors for each Video link (node). 2418 */ 2419 __le32 vow_config; 2420 2421 /* Number of msdu descriptors target should use */ 2422 __le32 num_msdu_desc; 2423 2424 /* 2425 * Max. number of Tx fragments per MSDU 2426 * This parameter controls the max number of Tx fragments per MSDU. 2427 * This is sent by the target as part of the WMI_SERVICE_READY event 2428 * and is overriden by the OS shim as required. 2429 */ 2430 __le32 max_frag_entries; 2431 } __packed; 2432 2433 enum wmi_10_2_feature_mask { 2434 WMI_10_2_RX_BATCH_MODE = BIT(0), 2435 WMI_10_2_ATF_CONFIG = BIT(1), 2436 WMI_10_2_COEX_GPIO = BIT(3), 2437 WMI_10_2_PEER_STATS = BIT(7), 2438 }; 2439 2440 struct wmi_resource_config_10_2 { 2441 struct wmi_resource_config_10x common; 2442 __le32 max_peer_ext_stats; 2443 __le32 smart_ant_cap; /* 0-disable, 1-enable */ 2444 __le32 bk_min_free; 2445 __le32 be_min_free; 2446 __le32 vi_min_free; 2447 __le32 vo_min_free; 2448 __le32 feature_mask; 2449 } __packed; 2450 2451 #define NUM_UNITS_IS_NUM_VDEVS BIT(0) 2452 #define NUM_UNITS_IS_NUM_PEERS BIT(1) 2453 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2) 2454 2455 struct wmi_resource_config_10_4 { 2456 /* Number of virtual devices (VAPs) to support */ 2457 __le32 num_vdevs; 2458 2459 /* Number of peer nodes to support */ 2460 __le32 num_peers; 2461 2462 /* Number of active peer nodes to support */ 2463 __le32 num_active_peers; 2464 2465 /* In offload mode, target supports features like WOW, chatter and other 2466 * protocol offloads. In order to support them some functionalities like 2467 * reorder buffering, PN checking need to be done in target. 2468 * This determines maximum number of peers supported by target in 2469 * offload mode. 2470 */ 2471 __le32 num_offload_peers; 2472 2473 /* Number of reorder buffers available for doing target based reorder 2474 * Rx reorder buffering 2475 */ 2476 __le32 num_offload_reorder_buffs; 2477 2478 /* Number of keys per peer */ 2479 __le32 num_peer_keys; 2480 2481 /* Total number of TX/RX data TIDs */ 2482 __le32 num_tids; 2483 2484 /* Max skid for resolving hash collisions. 2485 * The address search table is sparse, so that if two MAC addresses 2486 * result in the same hash value, the second of these conflicting 2487 * entries can slide to the next index in the address search table, 2488 * and use it, if it is unoccupied. This ast_skid_limit parameter 2489 * specifies the upper bound on how many subsequent indices to search 2490 * over to find an unoccupied space. 2491 */ 2492 __le32 ast_skid_limit; 2493 2494 /* The nominal chain mask for transmit. 2495 * The chain mask may be modified dynamically, e.g. to operate AP tx 2496 * with a reduced number of chains if no clients are associated. 2497 * This configuration parameter specifies the nominal chain-mask that 2498 * should be used when not operating with a reduced set of tx chains. 2499 */ 2500 __le32 tx_chain_mask; 2501 2502 /* The nominal chain mask for receive. 2503 * The chain mask may be modified dynamically, e.g. for a client to use 2504 * a reduced number of chains for receive if the traffic to the client 2505 * is low enough that it doesn't require downlink MIMO or antenna 2506 * diversity. This configuration parameter specifies the nominal 2507 * chain-mask that should be used when not operating with a reduced 2508 * set of rx chains. 2509 */ 2510 __le32 rx_chain_mask; 2511 2512 /* What rx reorder timeout (ms) to use for the AC. 2513 * Each WMM access class (voice, video, best-effort, background) will 2514 * have its own timeout value to dictate how long to wait for missing 2515 * rx MPDUs to arrive before flushing subsequent MPDUs that have already 2516 * been received. This parameter specifies the timeout in milliseconds 2517 * for each class. 2518 */ 2519 __le32 rx_timeout_pri[4]; 2520 2521 /* What mode the rx should decap packets to. 2522 * MAC can decap to RAW (no decap), native wifi or Ethernet types. 2523 * This setting also determines the default TX behavior, however TX 2524 * behavior can be modified on a per VAP basis during VAP init 2525 */ 2526 __le32 rx_decap_mode; 2527 2528 __le32 scan_max_pending_req; 2529 2530 __le32 bmiss_offload_max_vdev; 2531 2532 __le32 roam_offload_max_vdev; 2533 2534 __le32 roam_offload_max_ap_profiles; 2535 2536 /* How many groups to use for mcast->ucast conversion. 2537 * The target's WAL maintains a table to hold information regarding 2538 * which peers belong to a given multicast group, so that if 2539 * multicast->unicast conversion is enabled, the target can convert 2540 * multicast tx frames to a series of unicast tx frames, to each peer 2541 * within the multicast group. This num_mcast_groups configuration 2542 * parameter tells the target how many multicast groups to provide 2543 * storage for within its multicast group membership table. 2544 */ 2545 __le32 num_mcast_groups; 2546 2547 /* Size to alloc for the mcast membership table. 2548 * This num_mcast_table_elems configuration parameter tells the target 2549 * how many peer elements it needs to provide storage for in its 2550 * multicast group membership table. These multicast group membership 2551 * table elements are shared by the multicast groups stored within 2552 * the table. 2553 */ 2554 __le32 num_mcast_table_elems; 2555 2556 /* Whether/how to do multicast->unicast conversion. 2557 * This configuration parameter specifies whether the target should 2558 * perform multicast --> unicast conversion on transmit, and if so, 2559 * what to do if it finds no entries in its multicast group membership 2560 * table for the multicast IP address in the tx frame. 2561 * Configuration value: 2562 * 0 -> Do not perform multicast to unicast conversion. 2563 * 1 -> Convert multicast frames to unicast, if the IP multicast address 2564 * from the tx frame is found in the multicast group membership 2565 * table. If the IP multicast address is not found, drop the frame 2566 * 2 -> Convert multicast frames to unicast, if the IP multicast address 2567 * from the tx frame is found in the multicast group membership 2568 * table. If the IP multicast address is not found, transmit the 2569 * frame as multicast. 2570 */ 2571 __le32 mcast2ucast_mode; 2572 2573 /* How much memory to allocate for a tx PPDU dbg log. 2574 * This parameter controls how much memory the target will allocate to 2575 * store a log of tx PPDU meta-information (how large the PPDU was, 2576 * when it was sent, whether it was successful, etc.) 2577 */ 2578 __le32 tx_dbg_log_size; 2579 2580 /* How many AST entries to be allocated for WDS */ 2581 __le32 num_wds_entries; 2582 2583 /* MAC DMA burst size. 0 -default, 1 -256B */ 2584 __le32 dma_burst_size; 2585 2586 /* Fixed delimiters to be inserted after every MPDU to account for 2587 * interface latency to avoid underrun. 2588 */ 2589 __le32 mac_aggr_delim; 2590 2591 /* Determine whether target is responsible for detecting duplicate 2592 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering 2593 * is always performed on the target. 2594 * 2595 * 0: target responsible for frag timeout and dup checking 2596 * 1: host responsible for frag timeout and dup checking 2597 */ 2598 __le32 rx_skip_defrag_timeout_dup_detection_check; 2599 2600 /* Configuration for VoW : No of Video nodes to be supported and max 2601 * no of descriptors for each video link (node). 2602 */ 2603 __le32 vow_config; 2604 2605 /* Maximum vdev that could use gtk offload */ 2606 __le32 gtk_offload_max_vdev; 2607 2608 /* Number of msdu descriptors target should use */ 2609 __le32 num_msdu_desc; 2610 2611 /* Max number of tx fragments per MSDU. 2612 * This parameter controls the max number of tx fragments per MSDU. 2613 * This will passed by target as part of the WMI_SERVICE_READY event 2614 * and is overridden by the OS shim as required. 2615 */ 2616 __le32 max_frag_entries; 2617 2618 /* Max number of extended peer stats. 2619 * This parameter controls the max number of peers for which extended 2620 * statistics are supported by target 2621 */ 2622 __le32 max_peer_ext_stats; 2623 2624 /* Smart antenna capabilities information. 2625 * 1 - Smart antenna is enabled 2626 * 0 - Smart antenna is disabled 2627 * In future this can contain smart antenna specific capabilities. 2628 */ 2629 __le32 smart_ant_cap; 2630 2631 /* User can configure the buffers allocated for each AC (BE, BK, VI, VO) 2632 * during init. 2633 */ 2634 __le32 bk_minfree; 2635 __le32 be_minfree; 2636 __le32 vi_minfree; 2637 __le32 vo_minfree; 2638 2639 /* Rx batch mode capability. 2640 * 1 - Rx batch mode enabled 2641 * 0 - Rx batch mode disabled 2642 */ 2643 __le32 rx_batchmode; 2644 2645 /* Thermal throttling capability. 2646 * 1 - Capable of thermal throttling 2647 * 0 - Not capable of thermal throttling 2648 */ 2649 __le32 tt_support; 2650 2651 /* ATF configuration. 2652 * 1 - Enable ATF 2653 * 0 - Disable ATF 2654 */ 2655 __le32 atf_config; 2656 2657 /* Configure padding to manage IP header un-alignment 2658 * 1 - Enable padding 2659 * 0 - Disable padding 2660 */ 2661 __le32 iphdr_pad_config; 2662 2663 /* qwrap configuration 2664 * 1 - This is qwrap configuration 2665 * 0 - This is not qwrap 2666 */ 2667 __le32 qwrap_config; 2668 } __packed; 2669 2670 /* strucutre describing host memory chunk. */ 2671 struct host_memory_chunk { 2672 /* id of the request that is passed up in service ready */ 2673 __le32 req_id; 2674 /* the physical address the memory chunk */ 2675 __le32 ptr; 2676 /* size of the chunk */ 2677 __le32 size; 2678 } __packed; 2679 2680 struct wmi_host_mem_chunks { 2681 __le32 count; 2682 /* some fw revisions require at least 1 chunk regardless of count */ 2683 struct host_memory_chunk items[1]; 2684 } __packed; 2685 2686 struct wmi_init_cmd { 2687 struct wmi_resource_config resource_config; 2688 struct wmi_host_mem_chunks mem_chunks; 2689 } __packed; 2690 2691 /* _10x stucture is from 10.X FW API */ 2692 struct wmi_init_cmd_10x { 2693 struct wmi_resource_config_10x resource_config; 2694 struct wmi_host_mem_chunks mem_chunks; 2695 } __packed; 2696 2697 struct wmi_init_cmd_10_2 { 2698 struct wmi_resource_config_10_2 resource_config; 2699 struct wmi_host_mem_chunks mem_chunks; 2700 } __packed; 2701 2702 struct wmi_init_cmd_10_4 { 2703 struct wmi_resource_config_10_4 resource_config; 2704 struct wmi_host_mem_chunks mem_chunks; 2705 } __packed; 2706 2707 struct wmi_chan_list_entry { 2708 __le16 freq; 2709 u8 phy_mode; /* valid for 10.2 only */ 2710 u8 reserved; 2711 } __packed; 2712 2713 /* TLV for channel list */ 2714 struct wmi_chan_list { 2715 __le32 tag; /* WMI_CHAN_LIST_TAG */ 2716 __le32 num_chan; 2717 struct wmi_chan_list_entry channel_list[0]; 2718 } __packed; 2719 2720 struct wmi_bssid_list { 2721 __le32 tag; /* WMI_BSSID_LIST_TAG */ 2722 __le32 num_bssid; 2723 struct wmi_mac_addr bssid_list[0]; 2724 } __packed; 2725 2726 struct wmi_ie_data { 2727 __le32 tag; /* WMI_IE_TAG */ 2728 __le32 ie_len; 2729 u8 ie_data[0]; 2730 } __packed; 2731 2732 struct wmi_ssid { 2733 __le32 ssid_len; 2734 u8 ssid[32]; 2735 } __packed; 2736 2737 struct wmi_ssid_list { 2738 __le32 tag; /* WMI_SSID_LIST_TAG */ 2739 __le32 num_ssids; 2740 struct wmi_ssid ssids[0]; 2741 } __packed; 2742 2743 /* prefix used by scan requestor ids on the host */ 2744 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000 2745 2746 /* prefix used by scan request ids generated on the host */ 2747 /* host cycles through the lower 12 bits to generate ids */ 2748 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000 2749 2750 #define WLAN_SCAN_PARAMS_MAX_SSID 16 2751 #define WLAN_SCAN_PARAMS_MAX_BSSID 4 2752 #define WLAN_SCAN_PARAMS_MAX_IE_LEN 256 2753 2754 /* Values lower than this may be refused by some firmware revisions with a scan 2755 * completion with a timedout reason. 2756 */ 2757 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40 2758 2759 /* Scan priority numbers must be sequential, starting with 0 */ 2760 enum wmi_scan_priority { 2761 WMI_SCAN_PRIORITY_VERY_LOW = 0, 2762 WMI_SCAN_PRIORITY_LOW, 2763 WMI_SCAN_PRIORITY_MEDIUM, 2764 WMI_SCAN_PRIORITY_HIGH, 2765 WMI_SCAN_PRIORITY_VERY_HIGH, 2766 WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */ 2767 }; 2768 2769 struct wmi_start_scan_common { 2770 /* Scan ID */ 2771 __le32 scan_id; 2772 /* Scan requestor ID */ 2773 __le32 scan_req_id; 2774 /* VDEV id(interface) that is requesting scan */ 2775 __le32 vdev_id; 2776 /* Scan Priority, input to scan scheduler */ 2777 __le32 scan_priority; 2778 /* Scan events subscription */ 2779 __le32 notify_scan_events; 2780 /* dwell time in msec on active channels */ 2781 __le32 dwell_time_active; 2782 /* dwell time in msec on passive channels */ 2783 __le32 dwell_time_passive; 2784 /* 2785 * min time in msec on the BSS channel,only valid if atleast one 2786 * VDEV is active 2787 */ 2788 __le32 min_rest_time; 2789 /* 2790 * max rest time in msec on the BSS channel,only valid if at least 2791 * one VDEV is active 2792 */ 2793 /* 2794 * the scanner will rest on the bss channel at least min_rest_time 2795 * after min_rest_time the scanner will start checking for tx/rx 2796 * activity on all VDEVs. if there is no activity the scanner will 2797 * switch to off channel. if there is activity the scanner will let 2798 * the radio on the bss channel until max_rest_time expires.at 2799 * max_rest_time scanner will switch to off channel irrespective of 2800 * activity. activity is determined by the idle_time parameter. 2801 */ 2802 __le32 max_rest_time; 2803 /* 2804 * time before sending next set of probe requests. 2805 * The scanner keeps repeating probe requests transmission with 2806 * period specified by repeat_probe_time. 2807 * The number of probe requests specified depends on the ssid_list 2808 * and bssid_list 2809 */ 2810 __le32 repeat_probe_time; 2811 /* time in msec between 2 consequetive probe requests with in a set. */ 2812 __le32 probe_spacing_time; 2813 /* 2814 * data inactivity time in msec on bss channel that will be used by 2815 * scanner for measuring the inactivity. 2816 */ 2817 __le32 idle_time; 2818 /* maximum time in msec allowed for scan */ 2819 __le32 max_scan_time; 2820 /* 2821 * delay in msec before sending first probe request after switching 2822 * to a channel 2823 */ 2824 __le32 probe_delay; 2825 /* Scan control flags */ 2826 __le32 scan_ctrl_flags; 2827 } __packed; 2828 2829 struct wmi_start_scan_tlvs { 2830 /* TLV parameters. These includes channel list, ssid list, bssid list, 2831 * extra ies. 2832 */ 2833 u8 tlvs[0]; 2834 } __packed; 2835 2836 struct wmi_start_scan_cmd { 2837 struct wmi_start_scan_common common; 2838 __le32 burst_duration_ms; 2839 struct wmi_start_scan_tlvs tlvs; 2840 } __packed; 2841 2842 /* This is the definition from 10.X firmware branch */ 2843 struct wmi_10x_start_scan_cmd { 2844 struct wmi_start_scan_common common; 2845 struct wmi_start_scan_tlvs tlvs; 2846 } __packed; 2847 2848 struct wmi_ssid_arg { 2849 int len; 2850 const u8 *ssid; 2851 }; 2852 2853 struct wmi_bssid_arg { 2854 const u8 *bssid; 2855 }; 2856 2857 struct wmi_start_scan_arg { 2858 u32 scan_id; 2859 u32 scan_req_id; 2860 u32 vdev_id; 2861 u32 scan_priority; 2862 u32 notify_scan_events; 2863 u32 dwell_time_active; 2864 u32 dwell_time_passive; 2865 u32 min_rest_time; 2866 u32 max_rest_time; 2867 u32 repeat_probe_time; 2868 u32 probe_spacing_time; 2869 u32 idle_time; 2870 u32 max_scan_time; 2871 u32 probe_delay; 2872 u32 scan_ctrl_flags; 2873 u32 burst_duration_ms; 2874 2875 u32 ie_len; 2876 u32 n_channels; 2877 u32 n_ssids; 2878 u32 n_bssids; 2879 2880 u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN]; 2881 u16 channels[64]; 2882 struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID]; 2883 struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID]; 2884 }; 2885 2886 /* scan control flags */ 2887 2888 /* passively scan all channels including active channels */ 2889 #define WMI_SCAN_FLAG_PASSIVE 0x1 2890 /* add wild card ssid probe request even though ssid_list is specified. */ 2891 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2 2892 /* add cck rates to rates/xrate ie for the generated probe request */ 2893 #define WMI_SCAN_ADD_CCK_RATES 0x4 2894 /* add ofdm rates to rates/xrate ie for the generated probe request */ 2895 #define WMI_SCAN_ADD_OFDM_RATES 0x8 2896 /* To enable indication of Chan load and Noise floor to host */ 2897 #define WMI_SCAN_CHAN_STAT_EVENT 0x10 2898 /* Filter Probe request frames */ 2899 #define WMI_SCAN_FILTER_PROBE_REQ 0x20 2900 /* When set, DFS channels will not be scanned */ 2901 #define WMI_SCAN_BYPASS_DFS_CHN 0x40 2902 /* Different FW scan engine may choose to bail out on errors. 2903 * Allow the driver to have influence over that. */ 2904 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80 2905 2906 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */ 2907 #define WMI_SCAN_CLASS_MASK 0xFF000000 2908 2909 enum wmi_stop_scan_type { 2910 WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */ 2911 WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */ 2912 WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */ 2913 }; 2914 2915 struct wmi_stop_scan_cmd { 2916 __le32 scan_req_id; 2917 __le32 scan_id; 2918 __le32 req_type; 2919 __le32 vdev_id; 2920 } __packed; 2921 2922 struct wmi_stop_scan_arg { 2923 u32 req_id; 2924 enum wmi_stop_scan_type req_type; 2925 union { 2926 u32 scan_id; 2927 u32 vdev_id; 2928 } u; 2929 }; 2930 2931 struct wmi_scan_chan_list_cmd { 2932 __le32 num_scan_chans; 2933 struct wmi_channel chan_info[0]; 2934 } __packed; 2935 2936 struct wmi_scan_chan_list_arg { 2937 u32 n_channels; 2938 struct wmi_channel_arg *channels; 2939 }; 2940 2941 enum wmi_bss_filter { 2942 WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */ 2943 WMI_BSS_FILTER_ALL, /* all beacons forwarded */ 2944 WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */ 2945 WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */ 2946 WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */ 2947 WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */ 2948 WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */ 2949 WMI_BSS_FILTER_LAST_BSS, /* marker only */ 2950 }; 2951 2952 enum wmi_scan_event_type { 2953 WMI_SCAN_EVENT_STARTED = BIT(0), 2954 WMI_SCAN_EVENT_COMPLETED = BIT(1), 2955 WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2), 2956 WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3), 2957 WMI_SCAN_EVENT_DEQUEUED = BIT(4), 2958 /* possibly by high-prio scan */ 2959 WMI_SCAN_EVENT_PREEMPTED = BIT(5), 2960 WMI_SCAN_EVENT_START_FAILED = BIT(6), 2961 WMI_SCAN_EVENT_RESTARTED = BIT(7), 2962 WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8), 2963 WMI_SCAN_EVENT_MAX = BIT(15), 2964 }; 2965 2966 enum wmi_scan_completion_reason { 2967 WMI_SCAN_REASON_COMPLETED, 2968 WMI_SCAN_REASON_CANCELLED, 2969 WMI_SCAN_REASON_PREEMPTED, 2970 WMI_SCAN_REASON_TIMEDOUT, 2971 WMI_SCAN_REASON_INTERNAL_FAILURE, 2972 WMI_SCAN_REASON_MAX, 2973 }; 2974 2975 struct wmi_scan_event { 2976 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 2977 __le32 reason; /* %WMI_SCAN_REASON_ */ 2978 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 2979 __le32 scan_req_id; 2980 __le32 scan_id; 2981 __le32 vdev_id; 2982 } __packed; 2983 2984 /* 2985 * This defines how much headroom is kept in the 2986 * receive frame between the descriptor and the 2987 * payload, in order for the WMI PHY error and 2988 * management handler to insert header contents. 2989 * 2990 * This is in bytes. 2991 */ 2992 #define WMI_MGMT_RX_HDR_HEADROOM 52 2993 2994 /* 2995 * This event will be used for sending scan results 2996 * as well as rx mgmt frames to the host. The rx buffer 2997 * will be sent as part of this WMI event. It would be a 2998 * good idea to pass all the fields in the RX status 2999 * descriptor up to the host. 3000 */ 3001 struct wmi_mgmt_rx_hdr_v1 { 3002 __le32 channel; 3003 __le32 snr; 3004 __le32 rate; 3005 __le32 phy_mode; 3006 __le32 buf_len; 3007 __le32 status; /* %WMI_RX_STATUS_ */ 3008 } __packed; 3009 3010 struct wmi_mgmt_rx_hdr_v2 { 3011 struct wmi_mgmt_rx_hdr_v1 v1; 3012 __le32 rssi_ctl[4]; 3013 } __packed; 3014 3015 struct wmi_mgmt_rx_event_v1 { 3016 struct wmi_mgmt_rx_hdr_v1 hdr; 3017 u8 buf[0]; 3018 } __packed; 3019 3020 struct wmi_mgmt_rx_event_v2 { 3021 struct wmi_mgmt_rx_hdr_v2 hdr; 3022 u8 buf[0]; 3023 } __packed; 3024 3025 struct wmi_10_4_mgmt_rx_hdr { 3026 __le32 channel; 3027 __le32 snr; 3028 u8 rssi_ctl[4]; 3029 __le32 rate; 3030 __le32 phy_mode; 3031 __le32 buf_len; 3032 __le32 status; 3033 } __packed; 3034 3035 struct wmi_10_4_mgmt_rx_event { 3036 struct wmi_10_4_mgmt_rx_hdr hdr; 3037 u8 buf[0]; 3038 } __packed; 3039 3040 #define WMI_RX_STATUS_OK 0x00 3041 #define WMI_RX_STATUS_ERR_CRC 0x01 3042 #define WMI_RX_STATUS_ERR_DECRYPT 0x08 3043 #define WMI_RX_STATUS_ERR_MIC 0x10 3044 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20 3045 3046 #define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26 3047 #define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24 3048 #define PHY_ERROR_GEN_RADAR 0x05 3049 3050 #define PHY_ERROR_10_4_RADAR_MASK 0x4 3051 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000 3052 3053 enum phy_err_type { 3054 PHY_ERROR_UNKNOWN, 3055 PHY_ERROR_SPECTRAL_SCAN, 3056 PHY_ERROR_FALSE_RADAR_EXT, 3057 PHY_ERROR_RADAR 3058 }; 3059 3060 struct wmi_phyerr { 3061 __le32 tsf_timestamp; 3062 __le16 freq1; 3063 __le16 freq2; 3064 u8 rssi_combined; 3065 u8 chan_width_mhz; 3066 u8 phy_err_code; 3067 u8 rsvd0; 3068 __le32 rssi_chains[4]; 3069 __le16 nf_chains[4]; 3070 __le32 buf_len; 3071 u8 buf[0]; 3072 } __packed; 3073 3074 struct wmi_phyerr_event { 3075 __le32 num_phyerrs; 3076 __le32 tsf_l32; 3077 __le32 tsf_u32; 3078 struct wmi_phyerr phyerrs[0]; 3079 } __packed; 3080 3081 struct wmi_10_4_phyerr_event { 3082 __le32 tsf_l32; 3083 __le32 tsf_u32; 3084 __le16 freq1; 3085 __le16 freq2; 3086 u8 rssi_combined; 3087 u8 chan_width_mhz; 3088 u8 phy_err_code; 3089 u8 rsvd0; 3090 __le32 rssi_chains[4]; 3091 __le16 nf_chains[4]; 3092 __le32 phy_err_mask[2]; 3093 __le32 tsf_timestamp; 3094 __le32 buf_len; 3095 u8 buf[0]; 3096 } __packed; 3097 3098 #define PHYERR_TLV_SIG 0xBB 3099 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB 3100 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8 3101 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9 3102 3103 struct phyerr_radar_report { 3104 __le32 reg0; /* RADAR_REPORT_REG0_* */ 3105 __le32 reg1; /* REDAR_REPORT_REG1_* */ 3106 } __packed; 3107 3108 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000 3109 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31 3110 3111 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000 3112 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30 3113 3114 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000 3115 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20 3116 3117 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000 3118 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16 3119 3120 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00 3121 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10 3122 3123 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF 3124 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0 3125 3126 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000 3127 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31 3128 3129 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000 3130 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24 3131 3132 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000 3133 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16 3134 3135 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00 3136 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8 3137 3138 #define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF 3139 #define RADAR_REPORT_REG1_PULSE_DUR_LSB 0 3140 3141 struct phyerr_fft_report { 3142 __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */ 3143 __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */ 3144 } __packed; 3145 3146 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000 3147 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23 3148 3149 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000 3150 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14 3151 3152 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000 3153 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12 3154 3155 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF 3156 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0 3157 3158 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000 3159 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26 3160 3161 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000 3162 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18 3163 3164 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00 3165 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8 3166 3167 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF 3168 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0 3169 3170 struct phyerr_tlv { 3171 __le16 len; 3172 u8 tag; 3173 u8 sig; 3174 } __packed; 3175 3176 #define DFS_RSSI_POSSIBLY_FALSE 50 3177 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40 3178 3179 struct wmi_mgmt_tx_hdr { 3180 __le32 vdev_id; 3181 struct wmi_mac_addr peer_macaddr; 3182 __le32 tx_rate; 3183 __le32 tx_power; 3184 __le32 buf_len; 3185 } __packed; 3186 3187 struct wmi_mgmt_tx_cmd { 3188 struct wmi_mgmt_tx_hdr hdr; 3189 u8 buf[0]; 3190 } __packed; 3191 3192 struct wmi_echo_event { 3193 __le32 value; 3194 } __packed; 3195 3196 struct wmi_echo_cmd { 3197 __le32 value; 3198 } __packed; 3199 3200 struct wmi_pdev_set_regdomain_cmd { 3201 __le32 reg_domain; 3202 __le32 reg_domain_2G; 3203 __le32 reg_domain_5G; 3204 __le32 conformance_test_limit_2G; 3205 __le32 conformance_test_limit_5G; 3206 } __packed; 3207 3208 enum wmi_dfs_region { 3209 /* Uninitialized dfs domain */ 3210 WMI_UNINIT_DFS_DOMAIN = 0, 3211 3212 /* FCC3 dfs domain */ 3213 WMI_FCC_DFS_DOMAIN = 1, 3214 3215 /* ETSI dfs domain */ 3216 WMI_ETSI_DFS_DOMAIN = 2, 3217 3218 /*Japan dfs domain */ 3219 WMI_MKK4_DFS_DOMAIN = 3, 3220 }; 3221 3222 struct wmi_pdev_set_regdomain_cmd_10x { 3223 __le32 reg_domain; 3224 __le32 reg_domain_2G; 3225 __le32 reg_domain_5G; 3226 __le32 conformance_test_limit_2G; 3227 __le32 conformance_test_limit_5G; 3228 3229 /* dfs domain from wmi_dfs_region */ 3230 __le32 dfs_domain; 3231 } __packed; 3232 3233 /* Command to set/unset chip in quiet mode */ 3234 struct wmi_pdev_set_quiet_cmd { 3235 /* period in TUs */ 3236 __le32 period; 3237 3238 /* duration in TUs */ 3239 __le32 duration; 3240 3241 /* offset in TUs */ 3242 __le32 next_start; 3243 3244 /* enable/disable */ 3245 __le32 enabled; 3246 } __packed; 3247 3248 /* 3249 * 802.11g protection mode. 3250 */ 3251 enum ath10k_protmode { 3252 ATH10K_PROT_NONE = 0, /* no protection */ 3253 ATH10K_PROT_CTSONLY = 1, /* CTS to self */ 3254 ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */ 3255 }; 3256 3257 enum wmi_rtscts_profile { 3258 WMI_RTSCTS_FOR_NO_RATESERIES = 0, 3259 WMI_RTSCTS_FOR_SECOND_RATESERIES, 3260 WMI_RTSCTS_ACROSS_SW_RETRIES 3261 }; 3262 3263 #define WMI_RTSCTS_ENABLED 1 3264 #define WMI_RTSCTS_SET_MASK 0x0f 3265 #define WMI_RTSCTS_SET_LSB 0 3266 3267 #define WMI_RTSCTS_PROFILE_MASK 0xf0 3268 #define WMI_RTSCTS_PROFILE_LSB 4 3269 3270 enum wmi_beacon_gen_mode { 3271 WMI_BEACON_STAGGERED_MODE = 0, 3272 WMI_BEACON_BURST_MODE = 1 3273 }; 3274 3275 enum wmi_csa_event_ies_present_flag { 3276 WMI_CSA_IE_PRESENT = 0x00000001, 3277 WMI_XCSA_IE_PRESENT = 0x00000002, 3278 WMI_WBW_IE_PRESENT = 0x00000004, 3279 WMI_CSWARP_IE_PRESENT = 0x00000008, 3280 }; 3281 3282 /* wmi CSA receive event from beacon frame */ 3283 struct wmi_csa_event { 3284 __le32 i_fc_dur; 3285 /* Bit 0-15: FC */ 3286 /* Bit 16-31: DUR */ 3287 struct wmi_mac_addr i_addr1; 3288 struct wmi_mac_addr i_addr2; 3289 __le32 csa_ie[2]; 3290 __le32 xcsa_ie[2]; 3291 __le32 wb_ie[2]; 3292 __le32 cswarp_ie; 3293 __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */ 3294 } __packed; 3295 3296 /* the definition of different PDEV parameters */ 3297 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3298 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3299 #define PEER_DEFAULT_STATS_UPDATE_PERIOD 500 3300 3301 struct wmi_pdev_param_map { 3302 u32 tx_chain_mask; 3303 u32 rx_chain_mask; 3304 u32 txpower_limit2g; 3305 u32 txpower_limit5g; 3306 u32 txpower_scale; 3307 u32 beacon_gen_mode; 3308 u32 beacon_tx_mode; 3309 u32 resmgr_offchan_mode; 3310 u32 protection_mode; 3311 u32 dynamic_bw; 3312 u32 non_agg_sw_retry_th; 3313 u32 agg_sw_retry_th; 3314 u32 sta_kickout_th; 3315 u32 ac_aggrsize_scaling; 3316 u32 ltr_enable; 3317 u32 ltr_ac_latency_be; 3318 u32 ltr_ac_latency_bk; 3319 u32 ltr_ac_latency_vi; 3320 u32 ltr_ac_latency_vo; 3321 u32 ltr_ac_latency_timeout; 3322 u32 ltr_sleep_override; 3323 u32 ltr_rx_override; 3324 u32 ltr_tx_activity_timeout; 3325 u32 l1ss_enable; 3326 u32 dsleep_enable; 3327 u32 pcielp_txbuf_flush; 3328 u32 pcielp_txbuf_watermark; 3329 u32 pcielp_txbuf_tmo_en; 3330 u32 pcielp_txbuf_tmo_value; 3331 u32 pdev_stats_update_period; 3332 u32 vdev_stats_update_period; 3333 u32 peer_stats_update_period; 3334 u32 bcnflt_stats_update_period; 3335 u32 pmf_qos; 3336 u32 arp_ac_override; 3337 u32 dcs; 3338 u32 ani_enable; 3339 u32 ani_poll_period; 3340 u32 ani_listen_period; 3341 u32 ani_ofdm_level; 3342 u32 ani_cck_level; 3343 u32 dyntxchain; 3344 u32 proxy_sta; 3345 u32 idle_ps_config; 3346 u32 power_gating_sleep; 3347 u32 fast_channel_reset; 3348 u32 burst_dur; 3349 u32 burst_enable; 3350 u32 cal_period; 3351 u32 aggr_burst; 3352 u32 rx_decap_mode; 3353 u32 smart_antenna_default_antenna; 3354 u32 igmpmld_override; 3355 u32 igmpmld_tid; 3356 u32 antenna_gain; 3357 u32 rx_filter; 3358 u32 set_mcast_to_ucast_tid; 3359 u32 proxy_sta_mode; 3360 u32 set_mcast2ucast_mode; 3361 u32 set_mcast2ucast_buffer; 3362 u32 remove_mcast2ucast_buffer; 3363 u32 peer_sta_ps_statechg_enable; 3364 u32 igmpmld_ac_override; 3365 u32 block_interbss; 3366 u32 set_disable_reset_cmdid; 3367 u32 set_msdu_ttl_cmdid; 3368 u32 set_ppdu_duration_cmdid; 3369 u32 txbf_sound_period_cmdid; 3370 u32 set_promisc_mode_cmdid; 3371 u32 set_burst_mode_cmdid; 3372 u32 en_stats; 3373 u32 mu_group_policy; 3374 u32 noise_detection; 3375 u32 noise_threshold; 3376 u32 dpd_enable; 3377 u32 set_mcast_bcast_echo; 3378 u32 atf_strict_sch; 3379 u32 atf_sched_duration; 3380 u32 ant_plzn; 3381 u32 mgmt_retry_limit; 3382 u32 sensitivity_level; 3383 u32 signed_txpower_2g; 3384 u32 signed_txpower_5g; 3385 u32 enable_per_tid_amsdu; 3386 u32 enable_per_tid_ampdu; 3387 u32 cca_threshold; 3388 u32 rts_fixed_rate; 3389 u32 pdev_reset; 3390 u32 wapi_mbssid_offset; 3391 u32 arp_srcaddr; 3392 u32 arp_dstaddr; 3393 }; 3394 3395 #define WMI_PDEV_PARAM_UNSUPPORTED 0 3396 3397 enum wmi_pdev_param { 3398 /* TX chain mask */ 3399 WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3400 /* RX chain mask */ 3401 WMI_PDEV_PARAM_RX_CHAIN_MASK, 3402 /* TX power limit for 2G Radio */ 3403 WMI_PDEV_PARAM_TXPOWER_LIMIT2G, 3404 /* TX power limit for 5G Radio */ 3405 WMI_PDEV_PARAM_TXPOWER_LIMIT5G, 3406 /* TX power scale */ 3407 WMI_PDEV_PARAM_TXPOWER_SCALE, 3408 /* Beacon generation mode . 0: host, 1: target */ 3409 WMI_PDEV_PARAM_BEACON_GEN_MODE, 3410 /* Beacon generation mode . 0: staggered 1: bursted */ 3411 WMI_PDEV_PARAM_BEACON_TX_MODE, 3412 /* 3413 * Resource manager off chan mode . 3414 * 0: turn off off chan mode. 1: turn on offchan mode 3415 */ 3416 WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3417 /* 3418 * Protection mode: 3419 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3420 */ 3421 WMI_PDEV_PARAM_PROTECTION_MODE, 3422 /* 3423 * Dynamic bandwidth - 0: disable, 1: enable 3424 * 3425 * When enabled HW rate control tries different bandwidths when 3426 * retransmitting frames. 3427 */ 3428 WMI_PDEV_PARAM_DYNAMIC_BW, 3429 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3430 WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3431 /* aggregrate sw retry threshold. 0-disable*/ 3432 WMI_PDEV_PARAM_AGG_SW_RETRY_TH, 3433 /* Station kickout threshold (non of consecutive failures).0-disable */ 3434 WMI_PDEV_PARAM_STA_KICKOUT_TH, 3435 /* Aggerate size scaling configuration per AC */ 3436 WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3437 /* LTR enable */ 3438 WMI_PDEV_PARAM_LTR_ENABLE, 3439 /* LTR latency for BE, in us */ 3440 WMI_PDEV_PARAM_LTR_AC_LATENCY_BE, 3441 /* LTR latency for BK, in us */ 3442 WMI_PDEV_PARAM_LTR_AC_LATENCY_BK, 3443 /* LTR latency for VI, in us */ 3444 WMI_PDEV_PARAM_LTR_AC_LATENCY_VI, 3445 /* LTR latency for VO, in us */ 3446 WMI_PDEV_PARAM_LTR_AC_LATENCY_VO, 3447 /* LTR AC latency timeout, in ms */ 3448 WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3449 /* LTR platform latency override, in us */ 3450 WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3451 /* LTR-RX override, in us */ 3452 WMI_PDEV_PARAM_LTR_RX_OVERRIDE, 3453 /* Tx activity timeout for LTR, in us */ 3454 WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3455 /* L1SS state machine enable */ 3456 WMI_PDEV_PARAM_L1SS_ENABLE, 3457 /* Deep sleep state machine enable */ 3458 WMI_PDEV_PARAM_DSLEEP_ENABLE, 3459 /* RX buffering flush enable */ 3460 WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3461 /* RX buffering matermark */ 3462 WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3463 /* RX buffering timeout enable */ 3464 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3465 /* RX buffering timeout value */ 3466 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3467 /* pdev level stats update period in ms */ 3468 WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3469 /* vdev level stats update period in ms */ 3470 WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3471 /* peer level stats update period in ms */ 3472 WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3473 /* beacon filter status update period */ 3474 WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3475 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3476 WMI_PDEV_PARAM_PMF_QOS, 3477 /* Access category on which ARP frames are sent */ 3478 WMI_PDEV_PARAM_ARP_AC_OVERRIDE, 3479 /* DCS configuration */ 3480 WMI_PDEV_PARAM_DCS, 3481 /* Enable/Disable ANI on target */ 3482 WMI_PDEV_PARAM_ANI_ENABLE, 3483 /* configure the ANI polling period */ 3484 WMI_PDEV_PARAM_ANI_POLL_PERIOD, 3485 /* configure the ANI listening period */ 3486 WMI_PDEV_PARAM_ANI_LISTEN_PERIOD, 3487 /* configure OFDM immunity level */ 3488 WMI_PDEV_PARAM_ANI_OFDM_LEVEL, 3489 /* configure CCK immunity level */ 3490 WMI_PDEV_PARAM_ANI_CCK_LEVEL, 3491 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3492 WMI_PDEV_PARAM_DYNTXCHAIN, 3493 /* Enable/Disable proxy STA */ 3494 WMI_PDEV_PARAM_PROXY_STA, 3495 /* Enable/Disable low power state when all VDEVs are inactive/idle. */ 3496 WMI_PDEV_PARAM_IDLE_PS_CONFIG, 3497 /* Enable/Disable power gating sleep */ 3498 WMI_PDEV_PARAM_POWER_GATING_SLEEP, 3499 }; 3500 3501 enum wmi_10x_pdev_param { 3502 /* TX chian mask */ 3503 WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3504 /* RX chian mask */ 3505 WMI_10X_PDEV_PARAM_RX_CHAIN_MASK, 3506 /* TX power limit for 2G Radio */ 3507 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G, 3508 /* TX power limit for 5G Radio */ 3509 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G, 3510 /* TX power scale */ 3511 WMI_10X_PDEV_PARAM_TXPOWER_SCALE, 3512 /* Beacon generation mode . 0: host, 1: target */ 3513 WMI_10X_PDEV_PARAM_BEACON_GEN_MODE, 3514 /* Beacon generation mode . 0: staggered 1: bursted */ 3515 WMI_10X_PDEV_PARAM_BEACON_TX_MODE, 3516 /* 3517 * Resource manager off chan mode . 3518 * 0: turn off off chan mode. 1: turn on offchan mode 3519 */ 3520 WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3521 /* 3522 * Protection mode: 3523 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3524 */ 3525 WMI_10X_PDEV_PARAM_PROTECTION_MODE, 3526 /* Dynamic bandwidth 0: disable 1: enable */ 3527 WMI_10X_PDEV_PARAM_DYNAMIC_BW, 3528 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3529 WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3530 /* aggregrate sw retry threshold. 0-disable*/ 3531 WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH, 3532 /* Station kickout threshold (non of consecutive failures).0-disable */ 3533 WMI_10X_PDEV_PARAM_STA_KICKOUT_TH, 3534 /* Aggerate size scaling configuration per AC */ 3535 WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3536 /* LTR enable */ 3537 WMI_10X_PDEV_PARAM_LTR_ENABLE, 3538 /* LTR latency for BE, in us */ 3539 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE, 3540 /* LTR latency for BK, in us */ 3541 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK, 3542 /* LTR latency for VI, in us */ 3543 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI, 3544 /* LTR latency for VO, in us */ 3545 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO, 3546 /* LTR AC latency timeout, in ms */ 3547 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3548 /* LTR platform latency override, in us */ 3549 WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3550 /* LTR-RX override, in us */ 3551 WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE, 3552 /* Tx activity timeout for LTR, in us */ 3553 WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3554 /* L1SS state machine enable */ 3555 WMI_10X_PDEV_PARAM_L1SS_ENABLE, 3556 /* Deep sleep state machine enable */ 3557 WMI_10X_PDEV_PARAM_DSLEEP_ENABLE, 3558 /* pdev level stats update period in ms */ 3559 WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3560 /* vdev level stats update period in ms */ 3561 WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3562 /* peer level stats update period in ms */ 3563 WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3564 /* beacon filter status update period */ 3565 WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3566 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3567 WMI_10X_PDEV_PARAM_PMF_QOS, 3568 /* Access category on which ARP and DHCP frames are sent */ 3569 WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE, 3570 /* DCS configuration */ 3571 WMI_10X_PDEV_PARAM_DCS, 3572 /* Enable/Disable ANI on target */ 3573 WMI_10X_PDEV_PARAM_ANI_ENABLE, 3574 /* configure the ANI polling period */ 3575 WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD, 3576 /* configure the ANI listening period */ 3577 WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD, 3578 /* configure OFDM immunity level */ 3579 WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL, 3580 /* configure CCK immunity level */ 3581 WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL, 3582 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3583 WMI_10X_PDEV_PARAM_DYNTXCHAIN, 3584 /* Enable/Disable Fast channel reset*/ 3585 WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET, 3586 /* Set Bursting DUR */ 3587 WMI_10X_PDEV_PARAM_BURST_DUR, 3588 /* Set Bursting Enable*/ 3589 WMI_10X_PDEV_PARAM_BURST_ENABLE, 3590 3591 /* following are available as of firmware 10.2 */ 3592 WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 3593 WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE, 3594 WMI_10X_PDEV_PARAM_IGMPMLD_TID, 3595 WMI_10X_PDEV_PARAM_ANTENNA_GAIN, 3596 WMI_10X_PDEV_PARAM_RX_DECAP_MODE, 3597 WMI_10X_PDEV_PARAM_RX_FILTER, 3598 WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID, 3599 WMI_10X_PDEV_PARAM_PROXY_STA_MODE, 3600 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE, 3601 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 3602 WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 3603 WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE, 3604 WMI_10X_PDEV_PARAM_RTS_FIXED_RATE, 3605 WMI_10X_PDEV_PARAM_CAL_PERIOD 3606 }; 3607 3608 enum wmi_10_4_pdev_param { 3609 WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3610 WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK, 3611 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G, 3612 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G, 3613 WMI_10_4_PDEV_PARAM_TXPOWER_SCALE, 3614 WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE, 3615 WMI_10_4_PDEV_PARAM_BEACON_TX_MODE, 3616 WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3617 WMI_10_4_PDEV_PARAM_PROTECTION_MODE, 3618 WMI_10_4_PDEV_PARAM_DYNAMIC_BW, 3619 WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3620 WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH, 3621 WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH, 3622 WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3623 WMI_10_4_PDEV_PARAM_LTR_ENABLE, 3624 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE, 3625 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK, 3626 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI, 3627 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO, 3628 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3629 WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3630 WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE, 3631 WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3632 WMI_10_4_PDEV_PARAM_L1SS_ENABLE, 3633 WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE, 3634 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3635 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3636 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3637 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3638 WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3639 WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3640 WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3641 WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3642 WMI_10_4_PDEV_PARAM_PMF_QOS, 3643 WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE, 3644 WMI_10_4_PDEV_PARAM_DCS, 3645 WMI_10_4_PDEV_PARAM_ANI_ENABLE, 3646 WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD, 3647 WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD, 3648 WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL, 3649 WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL, 3650 WMI_10_4_PDEV_PARAM_DYNTXCHAIN, 3651 WMI_10_4_PDEV_PARAM_PROXY_STA, 3652 WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG, 3653 WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP, 3654 WMI_10_4_PDEV_PARAM_AGGR_BURST, 3655 WMI_10_4_PDEV_PARAM_RX_DECAP_MODE, 3656 WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET, 3657 WMI_10_4_PDEV_PARAM_BURST_DUR, 3658 WMI_10_4_PDEV_PARAM_BURST_ENABLE, 3659 WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 3660 WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE, 3661 WMI_10_4_PDEV_PARAM_IGMPMLD_TID, 3662 WMI_10_4_PDEV_PARAM_ANTENNA_GAIN, 3663 WMI_10_4_PDEV_PARAM_RX_FILTER, 3664 WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID, 3665 WMI_10_4_PDEV_PARAM_PROXY_STA_MODE, 3666 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE, 3667 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 3668 WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 3669 WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE, 3670 WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE, 3671 WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS, 3672 WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID, 3673 WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID, 3674 WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID, 3675 WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID, 3676 WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID, 3677 WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID, 3678 WMI_10_4_PDEV_PARAM_EN_STATS, 3679 WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY, 3680 WMI_10_4_PDEV_PARAM_NOISE_DETECTION, 3681 WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD, 3682 WMI_10_4_PDEV_PARAM_DPD_ENABLE, 3683 WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO, 3684 WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH, 3685 WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION, 3686 WMI_10_4_PDEV_PARAM_ANT_PLZN, 3687 WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT, 3688 WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL, 3689 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G, 3690 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G, 3691 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU, 3692 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU, 3693 WMI_10_4_PDEV_PARAM_CCA_THRESHOLD, 3694 WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE, 3695 WMI_10_4_PDEV_PARAM_CAL_PERIOD, 3696 WMI_10_4_PDEV_PARAM_PDEV_RESET, 3697 WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET, 3698 WMI_10_4_PDEV_PARAM_ARP_SRCADDR, 3699 WMI_10_4_PDEV_PARAM_ARP_DSTADDR, 3700 WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB, 3701 WMI_10_4_PDEV_PARAM_RX_BATCHMODE, 3702 WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY, 3703 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH, 3704 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR, 3705 WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE, 3706 }; 3707 3708 struct wmi_pdev_set_param_cmd { 3709 __le32 param_id; 3710 __le32 param_value; 3711 } __packed; 3712 3713 /* valid period is 1 ~ 60000ms, unit in millisecond */ 3714 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000 3715 3716 struct wmi_pdev_get_tpc_config_cmd { 3717 /* parameter */ 3718 __le32 param; 3719 } __packed; 3720 3721 #define WMI_TPC_CONFIG_PARAM 1 3722 #define WMI_TPC_RATE_MAX 160 3723 #define WMI_TPC_TX_N_CHAIN 4 3724 #define WMI_TPC_PREAM_TABLE_MAX 10 3725 #define WMI_TPC_FLAG 3 3726 #define WMI_TPC_BUF_SIZE 10 3727 3728 enum wmi_tpc_table_type { 3729 WMI_TPC_TABLE_TYPE_CDD = 0, 3730 WMI_TPC_TABLE_TYPE_STBC = 1, 3731 WMI_TPC_TABLE_TYPE_TXBF = 2, 3732 }; 3733 3734 enum wmi_tpc_config_event_flag { 3735 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, 3736 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, 3737 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, 3738 }; 3739 3740 struct wmi_pdev_tpc_config_event { 3741 __le32 reg_domain; 3742 __le32 chan_freq; 3743 __le32 phy_mode; 3744 __le32 twice_antenna_reduction; 3745 __le32 twice_max_rd_power; 3746 a_sle32 twice_antenna_gain; 3747 __le32 power_limit; 3748 __le32 rate_max; 3749 __le32 num_tx_chain; 3750 __le32 ctl; 3751 __le32 flags; 3752 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 3753 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 3754 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 3755 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 3756 u8 rates_array[WMI_TPC_RATE_MAX]; 3757 } __packed; 3758 3759 /* Transmit power scale factor. */ 3760 enum wmi_tp_scale { 3761 WMI_TP_SCALE_MAX = 0, /* no scaling (default) */ 3762 WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ 3763 WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ 3764 WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ 3765 WMI_TP_SCALE_MIN = 4, /* min, but still on */ 3766 WMI_TP_SCALE_SIZE = 5, /* max num of enum */ 3767 }; 3768 3769 struct wmi_pdev_chanlist_update_event { 3770 /* number of channels */ 3771 __le32 num_chan; 3772 /* array of channels */ 3773 struct wmi_channel channel_list[1]; 3774 } __packed; 3775 3776 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32) 3777 3778 struct wmi_debug_mesg_event { 3779 /* message buffer, NULL terminated */ 3780 char bufp[WMI_MAX_DEBUG_MESG]; 3781 } __packed; 3782 3783 enum { 3784 /* P2P device */ 3785 VDEV_SUBTYPE_P2PDEV = 0, 3786 /* P2P client */ 3787 VDEV_SUBTYPE_P2PCLI, 3788 /* P2P GO */ 3789 VDEV_SUBTYPE_P2PGO, 3790 /* BT3.0 HS */ 3791 VDEV_SUBTYPE_BT, 3792 }; 3793 3794 struct wmi_pdev_set_channel_cmd { 3795 /* idnore power , only use flags , mode and freq */ 3796 struct wmi_channel chan; 3797 } __packed; 3798 3799 struct wmi_pdev_pktlog_enable_cmd { 3800 __le32 ev_bitmap; 3801 } __packed; 3802 3803 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */ 3804 #define WMI_DSCP_MAP_MAX (64) 3805 struct wmi_pdev_set_dscp_tid_map_cmd { 3806 /* map indicating DSCP to TID conversion */ 3807 __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX]; 3808 } __packed; 3809 3810 enum mcast_bcast_rate_id { 3811 WMI_SET_MCAST_RATE, 3812 WMI_SET_BCAST_RATE 3813 }; 3814 3815 struct mcast_bcast_rate { 3816 enum mcast_bcast_rate_id rate_id; 3817 __le32 rate; 3818 } __packed; 3819 3820 struct wmi_wmm_params { 3821 __le32 cwmin; 3822 __le32 cwmax; 3823 __le32 aifs; 3824 __le32 txop; 3825 __le32 acm; 3826 __le32 no_ack; 3827 } __packed; 3828 3829 struct wmi_pdev_set_wmm_params { 3830 struct wmi_wmm_params ac_be; 3831 struct wmi_wmm_params ac_bk; 3832 struct wmi_wmm_params ac_vi; 3833 struct wmi_wmm_params ac_vo; 3834 } __packed; 3835 3836 struct wmi_wmm_params_arg { 3837 u32 cwmin; 3838 u32 cwmax; 3839 u32 aifs; 3840 u32 txop; 3841 u32 acm; 3842 u32 no_ack; 3843 }; 3844 3845 struct wmi_wmm_params_all_arg { 3846 struct wmi_wmm_params_arg ac_be; 3847 struct wmi_wmm_params_arg ac_bk; 3848 struct wmi_wmm_params_arg ac_vi; 3849 struct wmi_wmm_params_arg ac_vo; 3850 }; 3851 3852 struct wmi_pdev_stats_tx { 3853 /* Num HTT cookies queued to dispatch list */ 3854 __le32 comp_queued; 3855 3856 /* Num HTT cookies dispatched */ 3857 __le32 comp_delivered; 3858 3859 /* Num MSDU queued to WAL */ 3860 __le32 msdu_enqued; 3861 3862 /* Num MPDU queue to WAL */ 3863 __le32 mpdu_enqued; 3864 3865 /* Num MSDUs dropped by WMM limit */ 3866 __le32 wmm_drop; 3867 3868 /* Num Local frames queued */ 3869 __le32 local_enqued; 3870 3871 /* Num Local frames done */ 3872 __le32 local_freed; 3873 3874 /* Num queued to HW */ 3875 __le32 hw_queued; 3876 3877 /* Num PPDU reaped from HW */ 3878 __le32 hw_reaped; 3879 3880 /* Num underruns */ 3881 __le32 underrun; 3882 3883 /* Num PPDUs cleaned up in TX abort */ 3884 __le32 tx_abort; 3885 3886 /* Num MPDUs requed by SW */ 3887 __le32 mpdus_requed; 3888 3889 /* excessive retries */ 3890 __le32 tx_ko; 3891 3892 /* data hw rate code */ 3893 __le32 data_rc; 3894 3895 /* Scheduler self triggers */ 3896 __le32 self_triggers; 3897 3898 /* frames dropped due to excessive sw retries */ 3899 __le32 sw_retry_failure; 3900 3901 /* illegal rate phy errors */ 3902 __le32 illgl_rate_phy_err; 3903 3904 /* wal pdev continous xretry */ 3905 __le32 pdev_cont_xretry; 3906 3907 /* wal pdev continous xretry */ 3908 __le32 pdev_tx_timeout; 3909 3910 /* wal pdev resets */ 3911 __le32 pdev_resets; 3912 3913 /* frames dropped due to non-availability of stateless TIDs */ 3914 __le32 stateless_tid_alloc_failure; 3915 3916 __le32 phy_underrun; 3917 3918 /* MPDU is more than txop limit */ 3919 __le32 txop_ovf; 3920 } __packed; 3921 3922 struct wmi_10_4_pdev_stats_tx { 3923 /* Num HTT cookies queued to dispatch list */ 3924 __le32 comp_queued; 3925 3926 /* Num HTT cookies dispatched */ 3927 __le32 comp_delivered; 3928 3929 /* Num MSDU queued to WAL */ 3930 __le32 msdu_enqued; 3931 3932 /* Num MPDU queue to WAL */ 3933 __le32 mpdu_enqued; 3934 3935 /* Num MSDUs dropped by WMM limit */ 3936 __le32 wmm_drop; 3937 3938 /* Num Local frames queued */ 3939 __le32 local_enqued; 3940 3941 /* Num Local frames done */ 3942 __le32 local_freed; 3943 3944 /* Num queued to HW */ 3945 __le32 hw_queued; 3946 3947 /* Num PPDU reaped from HW */ 3948 __le32 hw_reaped; 3949 3950 /* Num underruns */ 3951 __le32 underrun; 3952 3953 /* HW Paused. */ 3954 __le32 hw_paused; 3955 3956 /* Num PPDUs cleaned up in TX abort */ 3957 __le32 tx_abort; 3958 3959 /* Num MPDUs requed by SW */ 3960 __le32 mpdus_requed; 3961 3962 /* excessive retries */ 3963 __le32 tx_ko; 3964 3965 /* data hw rate code */ 3966 __le32 data_rc; 3967 3968 /* Scheduler self triggers */ 3969 __le32 self_triggers; 3970 3971 /* frames dropped due to excessive sw retries */ 3972 __le32 sw_retry_failure; 3973 3974 /* illegal rate phy errors */ 3975 __le32 illgl_rate_phy_err; 3976 3977 /* wal pdev continuous xretry */ 3978 __le32 pdev_cont_xretry; 3979 3980 /* wal pdev tx timeouts */ 3981 __le32 pdev_tx_timeout; 3982 3983 /* wal pdev resets */ 3984 __le32 pdev_resets; 3985 3986 /* frames dropped due to non-availability of stateless TIDs */ 3987 __le32 stateless_tid_alloc_failure; 3988 3989 __le32 phy_underrun; 3990 3991 /* MPDU is more than txop limit */ 3992 __le32 txop_ovf; 3993 3994 /* Number of Sequences posted */ 3995 __le32 seq_posted; 3996 3997 /* Number of Sequences failed queueing */ 3998 __le32 seq_failed_queueing; 3999 4000 /* Number of Sequences completed */ 4001 __le32 seq_completed; 4002 4003 /* Number of Sequences restarted */ 4004 __le32 seq_restarted; 4005 4006 /* Number of MU Sequences posted */ 4007 __le32 mu_seq_posted; 4008 4009 /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */ 4010 __le32 mpdus_sw_flush; 4011 4012 /* Num MPDUs filtered by HW, all filter condition (TTL expired) */ 4013 __le32 mpdus_hw_filter; 4014 4015 /* Num MPDUs truncated by PDG 4016 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw) 4017 */ 4018 __le32 mpdus_truncated; 4019 4020 /* Num MPDUs that was tried but didn't receive ACK or BA */ 4021 __le32 mpdus_ack_failed; 4022 4023 /* Num MPDUs that was dropped due to expiry. */ 4024 __le32 mpdus_expired; 4025 } __packed; 4026 4027 struct wmi_pdev_stats_rx { 4028 /* Cnts any change in ring routing mid-ppdu */ 4029 __le32 mid_ppdu_route_change; 4030 4031 /* Total number of statuses processed */ 4032 __le32 status_rcvd; 4033 4034 /* Extra frags on rings 0-3 */ 4035 __le32 r0_frags; 4036 __le32 r1_frags; 4037 __le32 r2_frags; 4038 __le32 r3_frags; 4039 4040 /* MSDUs / MPDUs delivered to HTT */ 4041 __le32 htt_msdus; 4042 __le32 htt_mpdus; 4043 4044 /* MSDUs / MPDUs delivered to local stack */ 4045 __le32 loc_msdus; 4046 __le32 loc_mpdus; 4047 4048 /* AMSDUs that have more MSDUs than the status ring size */ 4049 __le32 oversize_amsdu; 4050 4051 /* Number of PHY errors */ 4052 __le32 phy_errs; 4053 4054 /* Number of PHY errors drops */ 4055 __le32 phy_err_drop; 4056 4057 /* Number of mpdu errors - FCS, MIC, ENC etc. */ 4058 __le32 mpdu_errs; 4059 } __packed; 4060 4061 struct wmi_pdev_stats_peer { 4062 /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ 4063 __le32 dummy; 4064 } __packed; 4065 4066 enum wmi_stats_id { 4067 WMI_STAT_PEER = BIT(0), 4068 WMI_STAT_AP = BIT(1), 4069 WMI_STAT_PDEV = BIT(2), 4070 WMI_STAT_VDEV = BIT(3), 4071 WMI_STAT_BCNFLT = BIT(4), 4072 WMI_STAT_VDEV_RATE = BIT(5), 4073 }; 4074 4075 struct wlan_inst_rssi_args { 4076 __le16 cfg_retry_count; 4077 __le16 retry_count; 4078 }; 4079 4080 struct wmi_request_stats_cmd { 4081 __le32 stats_id; 4082 4083 __le32 vdev_id; 4084 4085 /* peer MAC address */ 4086 struct wmi_mac_addr peer_macaddr; 4087 4088 /* Instantaneous RSSI arguments */ 4089 struct wlan_inst_rssi_args inst_rssi_args; 4090 } __packed; 4091 4092 /* Suspend option */ 4093 enum { 4094 /* suspend */ 4095 WMI_PDEV_SUSPEND, 4096 4097 /* suspend and disable all interrupts */ 4098 WMI_PDEV_SUSPEND_AND_DISABLE_INTR, 4099 }; 4100 4101 struct wmi_pdev_suspend_cmd { 4102 /* suspend option sent to target */ 4103 __le32 suspend_opt; 4104 } __packed; 4105 4106 struct wmi_stats_event { 4107 __le32 stats_id; /* WMI_STAT_ */ 4108 /* 4109 * number of pdev stats event structures 4110 * (wmi_pdev_stats) 0 or 1 4111 */ 4112 __le32 num_pdev_stats; 4113 /* 4114 * number of vdev stats event structures 4115 * (wmi_vdev_stats) 0 or max vdevs 4116 */ 4117 __le32 num_vdev_stats; 4118 /* 4119 * number of peer stats event structures 4120 * (wmi_peer_stats) 0 or max peers 4121 */ 4122 __le32 num_peer_stats; 4123 __le32 num_bcnflt_stats; 4124 /* 4125 * followed by 4126 * num_pdev_stats * size of(struct wmi_pdev_stats) 4127 * num_vdev_stats * size of(struct wmi_vdev_stats) 4128 * num_peer_stats * size of(struct wmi_peer_stats) 4129 * 4130 * By having a zero sized array, the pointer to data area 4131 * becomes available without increasing the struct size 4132 */ 4133 u8 data[0]; 4134 } __packed; 4135 4136 struct wmi_10_2_stats_event { 4137 __le32 stats_id; /* %WMI_REQUEST_ */ 4138 __le32 num_pdev_stats; 4139 __le32 num_pdev_ext_stats; 4140 __le32 num_vdev_stats; 4141 __le32 num_peer_stats; 4142 __le32 num_bcnflt_stats; 4143 u8 data[0]; 4144 } __packed; 4145 4146 /* 4147 * PDEV statistics 4148 * TODO: add all PDEV stats here 4149 */ 4150 struct wmi_pdev_stats_base { 4151 __le32 chan_nf; 4152 __le32 tx_frame_count; 4153 __le32 rx_frame_count; 4154 __le32 rx_clear_count; 4155 __le32 cycle_count; 4156 __le32 phy_err_count; 4157 __le32 chan_tx_pwr; 4158 } __packed; 4159 4160 struct wmi_pdev_stats { 4161 struct wmi_pdev_stats_base base; 4162 struct wmi_pdev_stats_tx tx; 4163 struct wmi_pdev_stats_rx rx; 4164 struct wmi_pdev_stats_peer peer; 4165 } __packed; 4166 4167 struct wmi_pdev_stats_extra { 4168 __le32 ack_rx_bad; 4169 __le32 rts_bad; 4170 __le32 rts_good; 4171 __le32 fcs_bad; 4172 __le32 no_beacons; 4173 __le32 mib_int_count; 4174 } __packed; 4175 4176 struct wmi_10x_pdev_stats { 4177 struct wmi_pdev_stats_base base; 4178 struct wmi_pdev_stats_tx tx; 4179 struct wmi_pdev_stats_rx rx; 4180 struct wmi_pdev_stats_peer peer; 4181 struct wmi_pdev_stats_extra extra; 4182 } __packed; 4183 4184 struct wmi_pdev_stats_mem { 4185 __le32 dram_free; 4186 __le32 iram_free; 4187 } __packed; 4188 4189 struct wmi_10_2_pdev_stats { 4190 struct wmi_pdev_stats_base base; 4191 struct wmi_pdev_stats_tx tx; 4192 __le32 mc_drop; 4193 struct wmi_pdev_stats_rx rx; 4194 __le32 pdev_rx_timeout; 4195 struct wmi_pdev_stats_mem mem; 4196 struct wmi_pdev_stats_peer peer; 4197 struct wmi_pdev_stats_extra extra; 4198 } __packed; 4199 4200 struct wmi_10_4_pdev_stats { 4201 struct wmi_pdev_stats_base base; 4202 struct wmi_10_4_pdev_stats_tx tx; 4203 struct wmi_pdev_stats_rx rx; 4204 __le32 rx_ovfl_errs; 4205 struct wmi_pdev_stats_mem mem; 4206 __le32 sram_free_size; 4207 struct wmi_pdev_stats_extra extra; 4208 } __packed; 4209 4210 /* 4211 * VDEV statistics 4212 * TODO: add all VDEV stats here 4213 */ 4214 struct wmi_vdev_stats { 4215 __le32 vdev_id; 4216 } __packed; 4217 4218 /* 4219 * peer statistics. 4220 * TODO: add more stats 4221 */ 4222 struct wmi_peer_stats { 4223 struct wmi_mac_addr peer_macaddr; 4224 __le32 peer_rssi; 4225 __le32 peer_tx_rate; 4226 } __packed; 4227 4228 struct wmi_10x_peer_stats { 4229 struct wmi_peer_stats old; 4230 __le32 peer_rx_rate; 4231 } __packed; 4232 4233 struct wmi_10_2_peer_stats { 4234 struct wmi_peer_stats old; 4235 __le32 peer_rx_rate; 4236 __le32 current_per; 4237 __le32 retries; 4238 __le32 tx_rate_count; 4239 __le32 max_4ms_frame_len; 4240 __le32 total_sub_frames; 4241 __le32 tx_bytes; 4242 __le32 num_pkt_loss_overflow[4]; 4243 __le32 num_pkt_loss_excess_retry[4]; 4244 } __packed; 4245 4246 struct wmi_10_2_4_peer_stats { 4247 struct wmi_10_2_peer_stats common; 4248 __le32 peer_rssi_changed; 4249 } __packed; 4250 4251 struct wmi_10_2_4_ext_peer_stats { 4252 struct wmi_10_2_peer_stats common; 4253 __le32 peer_rssi_changed; 4254 __le32 rx_duration; 4255 } __packed; 4256 4257 struct wmi_10_4_peer_stats { 4258 struct wmi_mac_addr peer_macaddr; 4259 __le32 peer_rssi; 4260 __le32 peer_rssi_seq_num; 4261 __le32 peer_tx_rate; 4262 __le32 peer_rx_rate; 4263 __le32 current_per; 4264 __le32 retries; 4265 __le32 tx_rate_count; 4266 __le32 max_4ms_frame_len; 4267 __le32 total_sub_frames; 4268 __le32 tx_bytes; 4269 __le32 num_pkt_loss_overflow[4]; 4270 __le32 num_pkt_loss_excess_retry[4]; 4271 __le32 peer_rssi_changed; 4272 } __packed; 4273 4274 struct wmi_10_2_pdev_ext_stats { 4275 __le32 rx_rssi_comb; 4276 __le32 rx_rssi[4]; 4277 __le32 rx_mcs[10]; 4278 __le32 tx_mcs[10]; 4279 __le32 ack_rssi; 4280 } __packed; 4281 4282 struct wmi_vdev_create_cmd { 4283 __le32 vdev_id; 4284 __le32 vdev_type; 4285 __le32 vdev_subtype; 4286 struct wmi_mac_addr vdev_macaddr; 4287 } __packed; 4288 4289 enum wmi_vdev_type { 4290 WMI_VDEV_TYPE_AP = 1, 4291 WMI_VDEV_TYPE_STA = 2, 4292 WMI_VDEV_TYPE_IBSS = 3, 4293 WMI_VDEV_TYPE_MONITOR = 4, 4294 }; 4295 4296 enum wmi_vdev_subtype { 4297 WMI_VDEV_SUBTYPE_NONE, 4298 WMI_VDEV_SUBTYPE_P2P_DEVICE, 4299 WMI_VDEV_SUBTYPE_P2P_CLIENT, 4300 WMI_VDEV_SUBTYPE_P2P_GO, 4301 WMI_VDEV_SUBTYPE_PROXY_STA, 4302 WMI_VDEV_SUBTYPE_MESH_11S, 4303 WMI_VDEV_SUBTYPE_MESH_NON_11S, 4304 }; 4305 4306 enum wmi_vdev_subtype_legacy { 4307 WMI_VDEV_SUBTYPE_LEGACY_NONE = 0, 4308 WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1, 4309 WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2, 4310 WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3, 4311 WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4, 4312 }; 4313 4314 enum wmi_vdev_subtype_10_2_4 { 4315 WMI_VDEV_SUBTYPE_10_2_4_NONE = 0, 4316 WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1, 4317 WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2, 4318 WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3, 4319 WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4, 4320 WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5, 4321 }; 4322 4323 enum wmi_vdev_subtype_10_4 { 4324 WMI_VDEV_SUBTYPE_10_4_NONE = 0, 4325 WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1, 4326 WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2, 4327 WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3, 4328 WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4, 4329 WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5, 4330 WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6, 4331 }; 4332 4333 /* values for vdev_subtype */ 4334 4335 /* values for vdev_start_request flags */ 4336 /* 4337 * Indicates that AP VDEV uses hidden ssid. only valid for 4338 * AP/GO */ 4339 #define WMI_VDEV_START_HIDDEN_SSID (1<<0) 4340 /* 4341 * Indicates if robust management frame/management frame 4342 * protection is enabled. For GO/AP vdevs, it indicates that 4343 * it may support station/client associations with RMF enabled. 4344 * For STA/client vdevs, it indicates that sta will 4345 * associate with AP with RMF enabled. */ 4346 #define WMI_VDEV_START_PMF_ENABLED (1<<1) 4347 4348 struct wmi_p2p_noa_descriptor { 4349 __le32 type_count; /* 255: continuous schedule, 0: reserved */ 4350 __le32 duration; /* Absent period duration in micro seconds */ 4351 __le32 interval; /* Absent period interval in micro seconds */ 4352 __le32 start_time; /* 32 bit tsf time when in starts */ 4353 } __packed; 4354 4355 struct wmi_vdev_start_request_cmd { 4356 /* WMI channel */ 4357 struct wmi_channel chan; 4358 /* unique id identifying the VDEV, generated by the caller */ 4359 __le32 vdev_id; 4360 /* requestor id identifying the caller module */ 4361 __le32 requestor_id; 4362 /* beacon interval from received beacon */ 4363 __le32 beacon_interval; 4364 /* DTIM Period from the received beacon */ 4365 __le32 dtim_period; 4366 /* Flags */ 4367 __le32 flags; 4368 /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ 4369 struct wmi_ssid ssid; 4370 /* beacon/probe reponse xmit rate. Applicable for SoftAP. */ 4371 __le32 bcn_tx_rate; 4372 /* beacon/probe reponse xmit power. Applicable for SoftAP. */ 4373 __le32 bcn_tx_power; 4374 /* number of p2p NOA descriptor(s) from scan entry */ 4375 __le32 num_noa_descriptors; 4376 /* 4377 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID. 4378 * During CAC, Our HW shouldn't ack ditected frames 4379 */ 4380 __le32 disable_hw_ack; 4381 /* actual p2p NOA descriptor from scan entry */ 4382 struct wmi_p2p_noa_descriptor noa_descriptors[2]; 4383 } __packed; 4384 4385 struct wmi_vdev_restart_request_cmd { 4386 struct wmi_vdev_start_request_cmd vdev_start_request_cmd; 4387 } __packed; 4388 4389 struct wmi_vdev_start_request_arg { 4390 u32 vdev_id; 4391 struct wmi_channel_arg channel; 4392 u32 bcn_intval; 4393 u32 dtim_period; 4394 u8 *ssid; 4395 u32 ssid_len; 4396 u32 bcn_tx_rate; 4397 u32 bcn_tx_power; 4398 bool disable_hw_ack; 4399 bool hidden_ssid; 4400 bool pmf_enabled; 4401 }; 4402 4403 struct wmi_vdev_delete_cmd { 4404 /* unique id identifying the VDEV, generated by the caller */ 4405 __le32 vdev_id; 4406 } __packed; 4407 4408 struct wmi_vdev_up_cmd { 4409 __le32 vdev_id; 4410 __le32 vdev_assoc_id; 4411 struct wmi_mac_addr vdev_bssid; 4412 } __packed; 4413 4414 struct wmi_vdev_stop_cmd { 4415 __le32 vdev_id; 4416 } __packed; 4417 4418 struct wmi_vdev_down_cmd { 4419 __le32 vdev_id; 4420 } __packed; 4421 4422 struct wmi_vdev_standby_response_cmd { 4423 /* unique id identifying the VDEV, generated by the caller */ 4424 __le32 vdev_id; 4425 } __packed; 4426 4427 struct wmi_vdev_resume_response_cmd { 4428 /* unique id identifying the VDEV, generated by the caller */ 4429 __le32 vdev_id; 4430 } __packed; 4431 4432 struct wmi_vdev_set_param_cmd { 4433 __le32 vdev_id; 4434 __le32 param_id; 4435 __le32 param_value; 4436 } __packed; 4437 4438 #define WMI_MAX_KEY_INDEX 3 4439 #define WMI_MAX_KEY_LEN 32 4440 4441 #define WMI_KEY_PAIRWISE 0x00 4442 #define WMI_KEY_GROUP 0x01 4443 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */ 4444 4445 struct wmi_key_seq_counter { 4446 __le32 key_seq_counter_l; 4447 __le32 key_seq_counter_h; 4448 } __packed; 4449 4450 #define WMI_CIPHER_NONE 0x0 /* clear key */ 4451 #define WMI_CIPHER_WEP 0x1 4452 #define WMI_CIPHER_TKIP 0x2 4453 #define WMI_CIPHER_AES_OCB 0x3 4454 #define WMI_CIPHER_AES_CCM 0x4 4455 #define WMI_CIPHER_WAPI 0x5 4456 #define WMI_CIPHER_CKIP 0x6 4457 #define WMI_CIPHER_AES_CMAC 0x7 4458 4459 struct wmi_vdev_install_key_cmd { 4460 __le32 vdev_id; 4461 struct wmi_mac_addr peer_macaddr; 4462 __le32 key_idx; 4463 __le32 key_flags; 4464 __le32 key_cipher; /* %WMI_CIPHER_ */ 4465 struct wmi_key_seq_counter key_rsc_counter; 4466 struct wmi_key_seq_counter key_global_rsc_counter; 4467 struct wmi_key_seq_counter key_tsc_counter; 4468 u8 wpi_key_rsc_counter[16]; 4469 u8 wpi_key_tsc_counter[16]; 4470 __le32 key_len; 4471 __le32 key_txmic_len; 4472 __le32 key_rxmic_len; 4473 4474 /* contains key followed by tx mic followed by rx mic */ 4475 u8 key_data[0]; 4476 } __packed; 4477 4478 struct wmi_vdev_install_key_arg { 4479 u32 vdev_id; 4480 const u8 *macaddr; 4481 u32 key_idx; 4482 u32 key_flags; 4483 u32 key_cipher; 4484 u32 key_len; 4485 u32 key_txmic_len; 4486 u32 key_rxmic_len; 4487 const void *key_data; 4488 }; 4489 4490 /* 4491 * vdev fixed rate format: 4492 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_ 4493 * - nss - b5:b4 - ss number (0 mean 1ss) 4494 * - rate_mcs - b3:b0 - as below 4495 * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps, 4496 * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s) 4497 * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps, 4498 * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps 4499 * HT/VHT: MCS index 4500 */ 4501 4502 /* Preamble types to be used with VDEV fixed rate configuration */ 4503 enum wmi_rate_preamble { 4504 WMI_RATE_PREAMBLE_OFDM, 4505 WMI_RATE_PREAMBLE_CCK, 4506 WMI_RATE_PREAMBLE_HT, 4507 WMI_RATE_PREAMBLE_VHT, 4508 }; 4509 4510 #define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3)) 4511 #define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3) 4512 #define ATH10K_HW_RATECODE(rate, nss, preamble) \ 4513 (((preamble) << 6) | ((nss) << 4) | (rate)) 4514 4515 /* Value to disable fixed rate setting */ 4516 #define WMI_FIXED_RATE_NONE (0xff) 4517 4518 struct wmi_vdev_param_map { 4519 u32 rts_threshold; 4520 u32 fragmentation_threshold; 4521 u32 beacon_interval; 4522 u32 listen_interval; 4523 u32 multicast_rate; 4524 u32 mgmt_tx_rate; 4525 u32 slot_time; 4526 u32 preamble; 4527 u32 swba_time; 4528 u32 wmi_vdev_stats_update_period; 4529 u32 wmi_vdev_pwrsave_ageout_time; 4530 u32 wmi_vdev_host_swba_interval; 4531 u32 dtim_period; 4532 u32 wmi_vdev_oc_scheduler_air_time_limit; 4533 u32 wds; 4534 u32 atim_window; 4535 u32 bmiss_count_max; 4536 u32 bmiss_first_bcnt; 4537 u32 bmiss_final_bcnt; 4538 u32 feature_wmm; 4539 u32 chwidth; 4540 u32 chextoffset; 4541 u32 disable_htprotection; 4542 u32 sta_quickkickout; 4543 u32 mgmt_rate; 4544 u32 protection_mode; 4545 u32 fixed_rate; 4546 u32 sgi; 4547 u32 ldpc; 4548 u32 tx_stbc; 4549 u32 rx_stbc; 4550 u32 intra_bss_fwd; 4551 u32 def_keyid; 4552 u32 nss; 4553 u32 bcast_data_rate; 4554 u32 mcast_data_rate; 4555 u32 mcast_indicate; 4556 u32 dhcp_indicate; 4557 u32 unknown_dest_indicate; 4558 u32 ap_keepalive_min_idle_inactive_time_secs; 4559 u32 ap_keepalive_max_idle_inactive_time_secs; 4560 u32 ap_keepalive_max_unresponsive_time_secs; 4561 u32 ap_enable_nawds; 4562 u32 mcast2ucast_set; 4563 u32 enable_rtscts; 4564 u32 txbf; 4565 u32 packet_powersave; 4566 u32 drop_unencry; 4567 u32 tx_encap_type; 4568 u32 ap_detect_out_of_sync_sleeping_sta_time_secs; 4569 u32 rc_num_retries; 4570 u32 cabq_maxdur; 4571 u32 mfptest_set; 4572 u32 rts_fixed_rate; 4573 u32 vht_sgimask; 4574 u32 vht80_ratemask; 4575 u32 early_rx_adjust_enable; 4576 u32 early_rx_tgt_bmiss_num; 4577 u32 early_rx_bmiss_sample_cycle; 4578 u32 early_rx_slop_step; 4579 u32 early_rx_init_slop; 4580 u32 early_rx_adjust_pause; 4581 u32 proxy_sta; 4582 u32 meru_vc; 4583 u32 rx_decap_type; 4584 u32 bw_nss_ratemask; 4585 }; 4586 4587 #define WMI_VDEV_PARAM_UNSUPPORTED 0 4588 4589 /* the definition of different VDEV parameters */ 4590 enum wmi_vdev_param { 4591 /* RTS Threshold */ 4592 WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1, 4593 /* Fragmentation threshold */ 4594 WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 4595 /* beacon interval in TUs */ 4596 WMI_VDEV_PARAM_BEACON_INTERVAL, 4597 /* Listen interval in TUs */ 4598 WMI_VDEV_PARAM_LISTEN_INTERVAL, 4599 /* muticast rate in Mbps */ 4600 WMI_VDEV_PARAM_MULTICAST_RATE, 4601 /* management frame rate in Mbps */ 4602 WMI_VDEV_PARAM_MGMT_TX_RATE, 4603 /* slot time (long vs short) */ 4604 WMI_VDEV_PARAM_SLOT_TIME, 4605 /* preamble (long vs short) */ 4606 WMI_VDEV_PARAM_PREAMBLE, 4607 /* SWBA time (time before tbtt in msec) */ 4608 WMI_VDEV_PARAM_SWBA_TIME, 4609 /* time period for updating VDEV stats */ 4610 WMI_VDEV_STATS_UPDATE_PERIOD, 4611 /* age out time in msec for frames queued for station in power save */ 4612 WMI_VDEV_PWRSAVE_AGEOUT_TIME, 4613 /* 4614 * Host SWBA interval (time in msec before tbtt for SWBA event 4615 * generation). 4616 */ 4617 WMI_VDEV_HOST_SWBA_INTERVAL, 4618 /* DTIM period (specified in units of num beacon intervals) */ 4619 WMI_VDEV_PARAM_DTIM_PERIOD, 4620 /* 4621 * scheduler air time limit for this VDEV. used by off chan 4622 * scheduler. 4623 */ 4624 WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 4625 /* enable/dsiable WDS for this VDEV */ 4626 WMI_VDEV_PARAM_WDS, 4627 /* ATIM Window */ 4628 WMI_VDEV_PARAM_ATIM_WINDOW, 4629 /* BMISS max */ 4630 WMI_VDEV_PARAM_BMISS_COUNT_MAX, 4631 /* BMISS first time */ 4632 WMI_VDEV_PARAM_BMISS_FIRST_BCNT, 4633 /* BMISS final time */ 4634 WMI_VDEV_PARAM_BMISS_FINAL_BCNT, 4635 /* WMM enables/disabled */ 4636 WMI_VDEV_PARAM_FEATURE_WMM, 4637 /* Channel width */ 4638 WMI_VDEV_PARAM_CHWIDTH, 4639 /* Channel Offset */ 4640 WMI_VDEV_PARAM_CHEXTOFFSET, 4641 /* Disable HT Protection */ 4642 WMI_VDEV_PARAM_DISABLE_HTPROTECTION, 4643 /* Quick STA Kickout */ 4644 WMI_VDEV_PARAM_STA_QUICKKICKOUT, 4645 /* Rate to be used with Management frames */ 4646 WMI_VDEV_PARAM_MGMT_RATE, 4647 /* Protection Mode */ 4648 WMI_VDEV_PARAM_PROTECTION_MODE, 4649 /* Fixed rate setting */ 4650 WMI_VDEV_PARAM_FIXED_RATE, 4651 /* Short GI Enable/Disable */ 4652 WMI_VDEV_PARAM_SGI, 4653 /* Enable LDPC */ 4654 WMI_VDEV_PARAM_LDPC, 4655 /* Enable Tx STBC */ 4656 WMI_VDEV_PARAM_TX_STBC, 4657 /* Enable Rx STBC */ 4658 WMI_VDEV_PARAM_RX_STBC, 4659 /* Intra BSS forwarding */ 4660 WMI_VDEV_PARAM_INTRA_BSS_FWD, 4661 /* Setting Default xmit key for Vdev */ 4662 WMI_VDEV_PARAM_DEF_KEYID, 4663 /* NSS width */ 4664 WMI_VDEV_PARAM_NSS, 4665 /* Set the custom rate for the broadcast data frames */ 4666 WMI_VDEV_PARAM_BCAST_DATA_RATE, 4667 /* Set the custom rate (rate-code) for multicast data frames */ 4668 WMI_VDEV_PARAM_MCAST_DATA_RATE, 4669 /* Tx multicast packet indicate Enable/Disable */ 4670 WMI_VDEV_PARAM_MCAST_INDICATE, 4671 /* Tx DHCP packet indicate Enable/Disable */ 4672 WMI_VDEV_PARAM_DHCP_INDICATE, 4673 /* Enable host inspection of Tx unicast packet to unknown destination */ 4674 WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 4675 4676 /* The minimum amount of time AP begins to consider STA inactive */ 4677 WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 4678 4679 /* 4680 * An associated STA is considered inactive when there is no recent 4681 * TX/RX activity and no downlink frames are buffered for it. Once a 4682 * STA exceeds the maximum idle inactive time, the AP will send an 4683 * 802.11 data-null as a keep alive to verify the STA is still 4684 * associated. If the STA does ACK the data-null, or if the data-null 4685 * is buffered and the STA does not retrieve it, the STA will be 4686 * considered unresponsive 4687 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 4688 */ 4689 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 4690 4691 /* 4692 * An associated STA is considered unresponsive if there is no recent 4693 * TX/RX activity and downlink frames are buffered for it. Once a STA 4694 * exceeds the maximum unresponsive time, the AP will send a 4695 * WMI_STA_KICKOUT event to the host so the STA can be deleted. */ 4696 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 4697 4698 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 4699 WMI_VDEV_PARAM_AP_ENABLE_NAWDS, 4700 /* Enable/Disable RTS-CTS */ 4701 WMI_VDEV_PARAM_ENABLE_RTSCTS, 4702 /* Enable TXBFee/er */ 4703 WMI_VDEV_PARAM_TXBF, 4704 4705 /* Set packet power save */ 4706 WMI_VDEV_PARAM_PACKET_POWERSAVE, 4707 4708 /* 4709 * Drops un-encrypted packets if eceived in an encrypted connection 4710 * otherwise forwards to host. 4711 */ 4712 WMI_VDEV_PARAM_DROP_UNENCRY, 4713 4714 /* 4715 * Set the encapsulation type for frames. 4716 */ 4717 WMI_VDEV_PARAM_TX_ENCAP_TYPE, 4718 }; 4719 4720 /* the definition of different VDEV parameters */ 4721 enum wmi_10x_vdev_param { 4722 /* RTS Threshold */ 4723 WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1, 4724 /* Fragmentation threshold */ 4725 WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 4726 /* beacon interval in TUs */ 4727 WMI_10X_VDEV_PARAM_BEACON_INTERVAL, 4728 /* Listen interval in TUs */ 4729 WMI_10X_VDEV_PARAM_LISTEN_INTERVAL, 4730 /* muticast rate in Mbps */ 4731 WMI_10X_VDEV_PARAM_MULTICAST_RATE, 4732 /* management frame rate in Mbps */ 4733 WMI_10X_VDEV_PARAM_MGMT_TX_RATE, 4734 /* slot time (long vs short) */ 4735 WMI_10X_VDEV_PARAM_SLOT_TIME, 4736 /* preamble (long vs short) */ 4737 WMI_10X_VDEV_PARAM_PREAMBLE, 4738 /* SWBA time (time before tbtt in msec) */ 4739 WMI_10X_VDEV_PARAM_SWBA_TIME, 4740 /* time period for updating VDEV stats */ 4741 WMI_10X_VDEV_STATS_UPDATE_PERIOD, 4742 /* age out time in msec for frames queued for station in power save */ 4743 WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME, 4744 /* 4745 * Host SWBA interval (time in msec before tbtt for SWBA event 4746 * generation). 4747 */ 4748 WMI_10X_VDEV_HOST_SWBA_INTERVAL, 4749 /* DTIM period (specified in units of num beacon intervals) */ 4750 WMI_10X_VDEV_PARAM_DTIM_PERIOD, 4751 /* 4752 * scheduler air time limit for this VDEV. used by off chan 4753 * scheduler. 4754 */ 4755 WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 4756 /* enable/dsiable WDS for this VDEV */ 4757 WMI_10X_VDEV_PARAM_WDS, 4758 /* ATIM Window */ 4759 WMI_10X_VDEV_PARAM_ATIM_WINDOW, 4760 /* BMISS max */ 4761 WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX, 4762 /* WMM enables/disabled */ 4763 WMI_10X_VDEV_PARAM_FEATURE_WMM, 4764 /* Channel width */ 4765 WMI_10X_VDEV_PARAM_CHWIDTH, 4766 /* Channel Offset */ 4767 WMI_10X_VDEV_PARAM_CHEXTOFFSET, 4768 /* Disable HT Protection */ 4769 WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION, 4770 /* Quick STA Kickout */ 4771 WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT, 4772 /* Rate to be used with Management frames */ 4773 WMI_10X_VDEV_PARAM_MGMT_RATE, 4774 /* Protection Mode */ 4775 WMI_10X_VDEV_PARAM_PROTECTION_MODE, 4776 /* Fixed rate setting */ 4777 WMI_10X_VDEV_PARAM_FIXED_RATE, 4778 /* Short GI Enable/Disable */ 4779 WMI_10X_VDEV_PARAM_SGI, 4780 /* Enable LDPC */ 4781 WMI_10X_VDEV_PARAM_LDPC, 4782 /* Enable Tx STBC */ 4783 WMI_10X_VDEV_PARAM_TX_STBC, 4784 /* Enable Rx STBC */ 4785 WMI_10X_VDEV_PARAM_RX_STBC, 4786 /* Intra BSS forwarding */ 4787 WMI_10X_VDEV_PARAM_INTRA_BSS_FWD, 4788 /* Setting Default xmit key for Vdev */ 4789 WMI_10X_VDEV_PARAM_DEF_KEYID, 4790 /* NSS width */ 4791 WMI_10X_VDEV_PARAM_NSS, 4792 /* Set the custom rate for the broadcast data frames */ 4793 WMI_10X_VDEV_PARAM_BCAST_DATA_RATE, 4794 /* Set the custom rate (rate-code) for multicast data frames */ 4795 WMI_10X_VDEV_PARAM_MCAST_DATA_RATE, 4796 /* Tx multicast packet indicate Enable/Disable */ 4797 WMI_10X_VDEV_PARAM_MCAST_INDICATE, 4798 /* Tx DHCP packet indicate Enable/Disable */ 4799 WMI_10X_VDEV_PARAM_DHCP_INDICATE, 4800 /* Enable host inspection of Tx unicast packet to unknown destination */ 4801 WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 4802 4803 /* The minimum amount of time AP begins to consider STA inactive */ 4804 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 4805 4806 /* 4807 * An associated STA is considered inactive when there is no recent 4808 * TX/RX activity and no downlink frames are buffered for it. Once a 4809 * STA exceeds the maximum idle inactive time, the AP will send an 4810 * 802.11 data-null as a keep alive to verify the STA is still 4811 * associated. If the STA does ACK the data-null, or if the data-null 4812 * is buffered and the STA does not retrieve it, the STA will be 4813 * considered unresponsive 4814 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 4815 */ 4816 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 4817 4818 /* 4819 * An associated STA is considered unresponsive if there is no recent 4820 * TX/RX activity and downlink frames are buffered for it. Once a STA 4821 * exceeds the maximum unresponsive time, the AP will send a 4822 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. */ 4823 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 4824 4825 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 4826 WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS, 4827 4828 WMI_10X_VDEV_PARAM_MCAST2UCAST_SET, 4829 /* Enable/Disable RTS-CTS */ 4830 WMI_10X_VDEV_PARAM_ENABLE_RTSCTS, 4831 4832 WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 4833 4834 /* following are available as of firmware 10.2 */ 4835 WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE, 4836 WMI_10X_VDEV_PARAM_CABQ_MAXDUR, 4837 WMI_10X_VDEV_PARAM_MFPTEST_SET, 4838 WMI_10X_VDEV_PARAM_RTS_FIXED_RATE, 4839 WMI_10X_VDEV_PARAM_VHT_SGIMASK, 4840 WMI_10X_VDEV_PARAM_VHT80_RATEMASK, 4841 }; 4842 4843 enum wmi_10_4_vdev_param { 4844 WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1, 4845 WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 4846 WMI_10_4_VDEV_PARAM_BEACON_INTERVAL, 4847 WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL, 4848 WMI_10_4_VDEV_PARAM_MULTICAST_RATE, 4849 WMI_10_4_VDEV_PARAM_MGMT_TX_RATE, 4850 WMI_10_4_VDEV_PARAM_SLOT_TIME, 4851 WMI_10_4_VDEV_PARAM_PREAMBLE, 4852 WMI_10_4_VDEV_PARAM_SWBA_TIME, 4853 WMI_10_4_VDEV_STATS_UPDATE_PERIOD, 4854 WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME, 4855 WMI_10_4_VDEV_HOST_SWBA_INTERVAL, 4856 WMI_10_4_VDEV_PARAM_DTIM_PERIOD, 4857 WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 4858 WMI_10_4_VDEV_PARAM_WDS, 4859 WMI_10_4_VDEV_PARAM_ATIM_WINDOW, 4860 WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX, 4861 WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT, 4862 WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT, 4863 WMI_10_4_VDEV_PARAM_FEATURE_WMM, 4864 WMI_10_4_VDEV_PARAM_CHWIDTH, 4865 WMI_10_4_VDEV_PARAM_CHEXTOFFSET, 4866 WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION, 4867 WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT, 4868 WMI_10_4_VDEV_PARAM_MGMT_RATE, 4869 WMI_10_4_VDEV_PARAM_PROTECTION_MODE, 4870 WMI_10_4_VDEV_PARAM_FIXED_RATE, 4871 WMI_10_4_VDEV_PARAM_SGI, 4872 WMI_10_4_VDEV_PARAM_LDPC, 4873 WMI_10_4_VDEV_PARAM_TX_STBC, 4874 WMI_10_4_VDEV_PARAM_RX_STBC, 4875 WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD, 4876 WMI_10_4_VDEV_PARAM_DEF_KEYID, 4877 WMI_10_4_VDEV_PARAM_NSS, 4878 WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE, 4879 WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE, 4880 WMI_10_4_VDEV_PARAM_MCAST_INDICATE, 4881 WMI_10_4_VDEV_PARAM_DHCP_INDICATE, 4882 WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 4883 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 4884 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 4885 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 4886 WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS, 4887 WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET, 4888 WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS, 4889 WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES, 4890 WMI_10_4_VDEV_PARAM_TXBF, 4891 WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE, 4892 WMI_10_4_VDEV_PARAM_DROP_UNENCRY, 4893 WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE, 4894 WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 4895 WMI_10_4_VDEV_PARAM_CABQ_MAXDUR, 4896 WMI_10_4_VDEV_PARAM_MFPTEST_SET, 4897 WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE, 4898 WMI_10_4_VDEV_PARAM_VHT_SGIMASK, 4899 WMI_10_4_VDEV_PARAM_VHT80_RATEMASK, 4900 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE, 4901 WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM, 4902 WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE, 4903 WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP, 4904 WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP, 4905 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE, 4906 WMI_10_4_VDEV_PARAM_PROXY_STA, 4907 WMI_10_4_VDEV_PARAM_MERU_VC, 4908 WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE, 4909 WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK, 4910 }; 4911 4912 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0) 4913 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1) 4914 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2) 4915 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3) 4916 4917 #define WMI_TXBF_STS_CAP_OFFSET_LSB 4 4918 #define WMI_TXBF_STS_CAP_OFFSET_MASK 0xf0 4919 #define WMI_BF_SOUND_DIM_OFFSET_LSB 8 4920 #define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00 4921 4922 /* slot time long */ 4923 #define WMI_VDEV_SLOT_TIME_LONG 0x1 4924 /* slot time short */ 4925 #define WMI_VDEV_SLOT_TIME_SHORT 0x2 4926 /* preablbe long */ 4927 #define WMI_VDEV_PREAMBLE_LONG 0x1 4928 /* preablbe short */ 4929 #define WMI_VDEV_PREAMBLE_SHORT 0x2 4930 4931 enum wmi_start_event_param { 4932 WMI_VDEV_RESP_START_EVENT = 0, 4933 WMI_VDEV_RESP_RESTART_EVENT, 4934 }; 4935 4936 struct wmi_vdev_start_response_event { 4937 __le32 vdev_id; 4938 __le32 req_id; 4939 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 4940 __le32 status; 4941 } __packed; 4942 4943 struct wmi_vdev_standby_req_event { 4944 /* unique id identifying the VDEV, generated by the caller */ 4945 __le32 vdev_id; 4946 } __packed; 4947 4948 struct wmi_vdev_resume_req_event { 4949 /* unique id identifying the VDEV, generated by the caller */ 4950 __le32 vdev_id; 4951 } __packed; 4952 4953 struct wmi_vdev_stopped_event { 4954 /* unique id identifying the VDEV, generated by the caller */ 4955 __le32 vdev_id; 4956 } __packed; 4957 4958 /* 4959 * common structure used for simple events 4960 * (stopped, resume_req, standby response) 4961 */ 4962 struct wmi_vdev_simple_event { 4963 /* unique id identifying the VDEV, generated by the caller */ 4964 __le32 vdev_id; 4965 } __packed; 4966 4967 /* VDEV start response status codes */ 4968 /* VDEV succesfully started */ 4969 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 4970 4971 /* requested VDEV not found */ 4972 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1 4973 4974 /* unsupported VDEV combination */ 4975 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2 4976 4977 /* TODO: please add more comments if you have in-depth information */ 4978 struct wmi_vdev_spectral_conf_cmd { 4979 __le32 vdev_id; 4980 4981 /* number of fft samples to send (0 for infinite) */ 4982 __le32 scan_count; 4983 __le32 scan_period; 4984 __le32 scan_priority; 4985 4986 /* number of bins in the FFT: 2^(fft_size - bin_scale) */ 4987 __le32 scan_fft_size; 4988 __le32 scan_gc_ena; 4989 __le32 scan_restart_ena; 4990 __le32 scan_noise_floor_ref; 4991 __le32 scan_init_delay; 4992 __le32 scan_nb_tone_thr; 4993 __le32 scan_str_bin_thr; 4994 __le32 scan_wb_rpt_mode; 4995 __le32 scan_rssi_rpt_mode; 4996 __le32 scan_rssi_thr; 4997 __le32 scan_pwr_format; 4998 4999 /* rpt_mode: Format of FFT report to software for spectral scan 5000 * triggered FFTs: 5001 * 0: No FFT report (only spectral scan summary report) 5002 * 1: 2-dword summary of metrics for each completed FFT + spectral 5003 * scan summary report 5004 * 2: 2-dword summary of metrics for each completed FFT + 5005 * 1x- oversampled bins(in-band) per FFT + spectral scan summary 5006 * report 5007 * 3: 2-dword summary of metrics for each completed FFT + 5008 * 2x- oversampled bins (all) per FFT + spectral scan summary 5009 */ 5010 __le32 scan_rpt_mode; 5011 __le32 scan_bin_scale; 5012 __le32 scan_dbm_adj; 5013 __le32 scan_chn_mask; 5014 } __packed; 5015 5016 struct wmi_vdev_spectral_conf_arg { 5017 u32 vdev_id; 5018 u32 scan_count; 5019 u32 scan_period; 5020 u32 scan_priority; 5021 u32 scan_fft_size; 5022 u32 scan_gc_ena; 5023 u32 scan_restart_ena; 5024 u32 scan_noise_floor_ref; 5025 u32 scan_init_delay; 5026 u32 scan_nb_tone_thr; 5027 u32 scan_str_bin_thr; 5028 u32 scan_wb_rpt_mode; 5029 u32 scan_rssi_rpt_mode; 5030 u32 scan_rssi_thr; 5031 u32 scan_pwr_format; 5032 u32 scan_rpt_mode; 5033 u32 scan_bin_scale; 5034 u32 scan_dbm_adj; 5035 u32 scan_chn_mask; 5036 }; 5037 5038 #define WMI_SPECTRAL_ENABLE_DEFAULT 0 5039 #define WMI_SPECTRAL_COUNT_DEFAULT 0 5040 #define WMI_SPECTRAL_PERIOD_DEFAULT 35 5041 #define WMI_SPECTRAL_PRIORITY_DEFAULT 1 5042 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7 5043 #define WMI_SPECTRAL_GC_ENA_DEFAULT 1 5044 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0 5045 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96 5046 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80 5047 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12 5048 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8 5049 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0 5050 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0 5051 #define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0 5052 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0 5053 #define WMI_SPECTRAL_RPT_MODE_DEFAULT 2 5054 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1 5055 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1 5056 #define WMI_SPECTRAL_CHN_MASK_DEFAULT 1 5057 5058 struct wmi_vdev_spectral_enable_cmd { 5059 __le32 vdev_id; 5060 __le32 trigger_cmd; 5061 __le32 enable_cmd; 5062 } __packed; 5063 5064 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1 5065 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2 5066 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1 5067 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2 5068 5069 /* Beacon processing related command and event structures */ 5070 struct wmi_bcn_tx_hdr { 5071 __le32 vdev_id; 5072 __le32 tx_rate; 5073 __le32 tx_power; 5074 __le32 bcn_len; 5075 } __packed; 5076 5077 struct wmi_bcn_tx_cmd { 5078 struct wmi_bcn_tx_hdr hdr; 5079 u8 *bcn[0]; 5080 } __packed; 5081 5082 struct wmi_bcn_tx_arg { 5083 u32 vdev_id; 5084 u32 tx_rate; 5085 u32 tx_power; 5086 u32 bcn_len; 5087 const void *bcn; 5088 }; 5089 5090 enum wmi_bcn_tx_ref_flags { 5091 WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1, 5092 WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2, 5093 }; 5094 5095 /* TODO: It is unclear why "no antenna" works while any other seemingly valid 5096 * chainmask yields no beacons on the air at all. 5097 */ 5098 #define WMI_BCN_TX_REF_DEF_ANTENNA 0 5099 5100 struct wmi_bcn_tx_ref_cmd { 5101 __le32 vdev_id; 5102 __le32 data_len; 5103 /* physical address of the frame - dma pointer */ 5104 __le32 data_ptr; 5105 /* id for host to track */ 5106 __le32 msdu_id; 5107 /* frame ctrl to setup PPDU desc */ 5108 __le32 frame_control; 5109 /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */ 5110 __le32 flags; 5111 /* introduced in 10.2 */ 5112 __le32 antenna_mask; 5113 } __packed; 5114 5115 /* Beacon filter */ 5116 #define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */ 5117 #define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */ 5118 #define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */ 5119 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */ 5120 #define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */ 5121 5122 struct wmi_bcn_filter_rx_cmd { 5123 /* Filter ID */ 5124 __le32 bcn_filter_id; 5125 /* Filter type - wmi_bcn_filter */ 5126 __le32 bcn_filter; 5127 /* Buffer len */ 5128 __le32 bcn_filter_len; 5129 /* Filter info (threshold, BSSID, RSSI) */ 5130 u8 *bcn_filter_buf; 5131 } __packed; 5132 5133 /* Capabilities and IEs to be passed to firmware */ 5134 struct wmi_bcn_prb_info { 5135 /* Capabilities */ 5136 __le32 caps; 5137 /* ERP info */ 5138 __le32 erp; 5139 /* Advanced capabilities */ 5140 /* HT capabilities */ 5141 /* HT Info */ 5142 /* ibss_dfs */ 5143 /* wpa Info */ 5144 /* rsn Info */ 5145 /* rrm info */ 5146 /* ath_ext */ 5147 /* app IE */ 5148 } __packed; 5149 5150 struct wmi_bcn_tmpl_cmd { 5151 /* unique id identifying the VDEV, generated by the caller */ 5152 __le32 vdev_id; 5153 /* TIM IE offset from the beginning of the template. */ 5154 __le32 tim_ie_offset; 5155 /* beacon probe capabilities and IEs */ 5156 struct wmi_bcn_prb_info bcn_prb_info; 5157 /* beacon buffer length */ 5158 __le32 buf_len; 5159 /* variable length data */ 5160 u8 data[1]; 5161 } __packed; 5162 5163 struct wmi_prb_tmpl_cmd { 5164 /* unique id identifying the VDEV, generated by the caller */ 5165 __le32 vdev_id; 5166 /* beacon probe capabilities and IEs */ 5167 struct wmi_bcn_prb_info bcn_prb_info; 5168 /* beacon buffer length */ 5169 __le32 buf_len; 5170 /* Variable length data */ 5171 u8 data[1]; 5172 } __packed; 5173 5174 enum wmi_sta_ps_mode { 5175 /* enable power save for the given STA VDEV */ 5176 WMI_STA_PS_MODE_DISABLED = 0, 5177 /* disable power save for a given STA VDEV */ 5178 WMI_STA_PS_MODE_ENABLED = 1, 5179 }; 5180 5181 struct wmi_sta_powersave_mode_cmd { 5182 /* unique id identifying the VDEV, generated by the caller */ 5183 __le32 vdev_id; 5184 5185 /* 5186 * Power save mode 5187 * (see enum wmi_sta_ps_mode) 5188 */ 5189 __le32 sta_ps_mode; 5190 } __packed; 5191 5192 enum wmi_csa_offload_en { 5193 WMI_CSA_OFFLOAD_DISABLE = 0, 5194 WMI_CSA_OFFLOAD_ENABLE = 1, 5195 }; 5196 5197 struct wmi_csa_offload_enable_cmd { 5198 __le32 vdev_id; 5199 __le32 csa_offload_enable; 5200 } __packed; 5201 5202 struct wmi_csa_offload_chanswitch_cmd { 5203 __le32 vdev_id; 5204 struct wmi_channel chan; 5205 } __packed; 5206 5207 /* 5208 * This parameter controls the policy for retrieving frames from AP while the 5209 * STA is in sleep state. 5210 * 5211 * Only takes affect if the sta_ps_mode is enabled 5212 */ 5213 enum wmi_sta_ps_param_rx_wake_policy { 5214 /* 5215 * Wake up when ever there is an RX activity on the VDEV. In this mode 5216 * the Power save SM(state machine) will come out of sleep by either 5217 * sending null frame (or) a data frame (with PS==0) in response to TIM 5218 * bit set in the received beacon frame from AP. 5219 */ 5220 WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0, 5221 5222 /* 5223 * Here the power save state machine will not wakeup in response to TIM 5224 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD 5225 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all 5226 * access categories are delivery-enabled, the station will send a 5227 * UAPSD trigger frame, otherwise it will send a PS-Poll. 5228 */ 5229 WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, 5230 }; 5231 5232 /* 5233 * Number of tx frames/beacon that cause the power save SM to wake up. 5234 * 5235 * Value 1 causes the SM to wake up for every TX. Value 0 has a special 5236 * meaning, It will cause the SM to never wake up. This is useful if you want 5237 * to keep the system to sleep all the time for some kind of test mode . host 5238 * can change this parameter any time. It will affect at the next tx frame. 5239 */ 5240 enum wmi_sta_ps_param_tx_wake_threshold { 5241 WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, 5242 WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, 5243 5244 /* 5245 * Values greater than one indicate that many TX attempts per beacon 5246 * interval before the STA will wake up 5247 */ 5248 }; 5249 5250 /* 5251 * The maximum number of PS-Poll frames the FW will send in response to 5252 * traffic advertised in TIM before waking up (by sending a null frame with PS 5253 * = 0). Value 0 has a special meaning: there is no maximum count and the FW 5254 * will send as many PS-Poll as are necessary to retrieve buffered BU. This 5255 * parameter is used when the RX wake policy is 5256 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake 5257 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE. 5258 */ 5259 enum wmi_sta_ps_param_pspoll_count { 5260 WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0, 5261 /* 5262 * Values greater than 0 indicate the maximum numer of PS-Poll frames 5263 * FW will send before waking up. 5264 */ 5265 5266 /* When u-APSD is enabled the firmware will be very reluctant to exit 5267 * STA PS. This could result in very poor Rx performance with STA doing 5268 * PS-Poll for each and every buffered frame. This value is a bit 5269 * arbitrary. 5270 */ 5271 WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3, 5272 }; 5273 5274 /* 5275 * This will include the delivery and trigger enabled state for every AC. 5276 * This is the negotiated state with AP. The host MLME needs to set this based 5277 * on AP capability and the state Set in the association request by the 5278 * station MLME.Lower 8 bits of the value specify the UAPSD configuration. 5279 */ 5280 #define WMI_UAPSD_AC_TYPE_DELI 0 5281 #define WMI_UAPSD_AC_TYPE_TRIG 1 5282 5283 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \ 5284 ((type == WMI_UAPSD_AC_TYPE_DELI) ? (1<<(ac<<1)) : (1<<((ac<<1)+1))) 5285 5286 enum wmi_sta_ps_param_uapsd { 5287 WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5288 WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5289 WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5290 WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5291 WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5292 WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5293 WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5294 WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5295 }; 5296 5297 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX 5298 5299 struct wmi_sta_uapsd_auto_trig_param { 5300 __le32 wmm_ac; 5301 __le32 user_priority; 5302 __le32 service_interval; 5303 __le32 suspend_interval; 5304 __le32 delay_interval; 5305 }; 5306 5307 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param { 5308 __le32 vdev_id; 5309 struct wmi_mac_addr peer_macaddr; 5310 __le32 num_ac; 5311 }; 5312 5313 struct wmi_sta_uapsd_auto_trig_arg { 5314 u32 wmm_ac; 5315 u32 user_priority; 5316 u32 service_interval; 5317 u32 suspend_interval; 5318 u32 delay_interval; 5319 }; 5320 5321 enum wmi_sta_powersave_param { 5322 /* 5323 * Controls how frames are retrievd from AP while STA is sleeping 5324 * 5325 * (see enum wmi_sta_ps_param_rx_wake_policy) 5326 */ 5327 WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0, 5328 5329 /* 5330 * The STA will go active after this many TX 5331 * 5332 * (see enum wmi_sta_ps_param_tx_wake_threshold) 5333 */ 5334 WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, 5335 5336 /* 5337 * Number of PS-Poll to send before STA wakes up 5338 * 5339 * (see enum wmi_sta_ps_param_pspoll_count) 5340 * 5341 */ 5342 WMI_STA_PS_PARAM_PSPOLL_COUNT = 2, 5343 5344 /* 5345 * TX/RX inactivity time in msec before going to sleep. 5346 * 5347 * The power save SM will monitor tx/rx activity on the VDEV, if no 5348 * activity for the specified msec of the parameter the Power save 5349 * SM will go to sleep. 5350 */ 5351 WMI_STA_PS_PARAM_INACTIVITY_TIME = 3, 5352 5353 /* 5354 * Set uapsd configuration. 5355 * 5356 * (see enum wmi_sta_ps_param_uapsd) 5357 */ 5358 WMI_STA_PS_PARAM_UAPSD = 4, 5359 }; 5360 5361 struct wmi_sta_powersave_param_cmd { 5362 __le32 vdev_id; 5363 __le32 param_id; /* %WMI_STA_PS_PARAM_ */ 5364 __le32 param_value; 5365 } __packed; 5366 5367 /* No MIMO power save */ 5368 #define WMI_STA_MIMO_PS_MODE_DISABLE 5369 /* mimo powersave mode static*/ 5370 #define WMI_STA_MIMO_PS_MODE_STATIC 5371 /* mimo powersave mode dynamic */ 5372 #define WMI_STA_MIMO_PS_MODE_DYNAMIC 5373 5374 struct wmi_sta_mimo_ps_mode_cmd { 5375 /* unique id identifying the VDEV, generated by the caller */ 5376 __le32 vdev_id; 5377 /* mimo powersave mode as defined above */ 5378 __le32 mimo_pwrsave_mode; 5379 } __packed; 5380 5381 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */ 5382 enum wmi_ap_ps_param_uapsd { 5383 WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5384 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5385 WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5386 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5387 WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5388 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5389 WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5390 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5391 }; 5392 5393 /* U-APSD maximum service period of peer station */ 5394 enum wmi_ap_ps_peer_param_max_sp { 5395 WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, 5396 WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1, 5397 WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2, 5398 WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3, 5399 MAX_WMI_AP_PS_PEER_PARAM_MAX_SP, 5400 }; 5401 5402 /* 5403 * AP power save parameter 5404 * Set a power save specific parameter for a peer station 5405 */ 5406 enum wmi_ap_ps_peer_param { 5407 /* Set uapsd configuration for a given peer. 5408 * 5409 * Include the delivery and trigger enabled state for every AC. 5410 * The host MLME needs to set this based on AP capability and stations 5411 * request Set in the association request received from the station. 5412 * 5413 * Lower 8 bits of the value specify the UAPSD configuration. 5414 * 5415 * (see enum wmi_ap_ps_param_uapsd) 5416 * The default value is 0. 5417 */ 5418 WMI_AP_PS_PEER_PARAM_UAPSD = 0, 5419 5420 /* 5421 * Set the service period for a UAPSD capable station 5422 * 5423 * The service period from wme ie in the (re)assoc request frame. 5424 * 5425 * (see enum wmi_ap_ps_peer_param_max_sp) 5426 */ 5427 WMI_AP_PS_PEER_PARAM_MAX_SP = 1, 5428 5429 /* Time in seconds for aging out buffered frames for STA in PS */ 5430 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, 5431 }; 5432 5433 struct wmi_ap_ps_peer_cmd { 5434 /* unique id identifying the VDEV, generated by the caller */ 5435 __le32 vdev_id; 5436 5437 /* peer MAC address */ 5438 struct wmi_mac_addr peer_macaddr; 5439 5440 /* AP powersave param (see enum wmi_ap_ps_peer_param) */ 5441 __le32 param_id; 5442 5443 /* AP powersave param value */ 5444 __le32 param_value; 5445 } __packed; 5446 5447 /* 128 clients = 4 words */ 5448 #define WMI_TIM_BITMAP_ARRAY_SIZE 4 5449 5450 struct wmi_tim_info { 5451 __le32 tim_len; 5452 __le32 tim_mcast; 5453 __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE]; 5454 __le32 tim_changed; 5455 __le32 tim_num_ps_pending; 5456 } __packed; 5457 5458 struct wmi_tim_info_arg { 5459 __le32 tim_len; 5460 __le32 tim_mcast; 5461 const __le32 *tim_bitmap; 5462 __le32 tim_changed; 5463 __le32 tim_num_ps_pending; 5464 } __packed; 5465 5466 /* Maximum number of NOA Descriptors supported */ 5467 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4 5468 #define WMI_P2P_OPPPS_ENABLE_BIT BIT(0) 5469 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1 5470 #define WMI_P2P_NOA_CHANGED_BIT BIT(0) 5471 5472 struct wmi_p2p_noa_info { 5473 /* Bit 0 - Flag to indicate an update in NOA schedule 5474 Bits 7-1 - Reserved */ 5475 u8 changed; 5476 /* NOA index */ 5477 u8 index; 5478 /* Bit 0 - Opp PS state of the AP 5479 Bits 1-7 - Ctwindow in TUs */ 5480 u8 ctwindow_oppps; 5481 /* Number of NOA descriptors */ 5482 u8 num_descriptors; 5483 5484 struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS]; 5485 } __packed; 5486 5487 struct wmi_bcn_info { 5488 struct wmi_tim_info tim_info; 5489 struct wmi_p2p_noa_info p2p_noa_info; 5490 } __packed; 5491 5492 struct wmi_host_swba_event { 5493 __le32 vdev_map; 5494 struct wmi_bcn_info bcn_info[0]; 5495 } __packed; 5496 5497 struct wmi_10_2_4_bcn_info { 5498 struct wmi_tim_info tim_info; 5499 /* The 10.2.4 FW doesn't have p2p NOA info */ 5500 } __packed; 5501 5502 struct wmi_10_2_4_host_swba_event { 5503 __le32 vdev_map; 5504 struct wmi_10_2_4_bcn_info bcn_info[0]; 5505 } __packed; 5506 5507 /* 16 words = 512 client + 1 word = for guard */ 5508 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17 5509 5510 struct wmi_10_4_tim_info { 5511 __le32 tim_len; 5512 __le32 tim_mcast; 5513 __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE]; 5514 __le32 tim_changed; 5515 __le32 tim_num_ps_pending; 5516 } __packed; 5517 5518 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1 5519 5520 struct wmi_10_4_p2p_noa_info { 5521 /* Bit 0 - Flag to indicate an update in NOA schedule 5522 * Bits 7-1 - Reserved 5523 */ 5524 u8 changed; 5525 /* NOA index */ 5526 u8 index; 5527 /* Bit 0 - Opp PS state of the AP 5528 * Bits 1-7 - Ctwindow in TUs 5529 */ 5530 u8 ctwindow_oppps; 5531 /* Number of NOA descriptors */ 5532 u8 num_descriptors; 5533 5534 struct wmi_p2p_noa_descriptor 5535 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS]; 5536 } __packed; 5537 5538 struct wmi_10_4_bcn_info { 5539 struct wmi_10_4_tim_info tim_info; 5540 struct wmi_10_4_p2p_noa_info p2p_noa_info; 5541 } __packed; 5542 5543 struct wmi_10_4_host_swba_event { 5544 __le32 vdev_map; 5545 struct wmi_10_4_bcn_info bcn_info[0]; 5546 } __packed; 5547 5548 #define WMI_MAX_AP_VDEV 16 5549 5550 struct wmi_tbtt_offset_event { 5551 __le32 vdev_map; 5552 __le32 tbttoffset_list[WMI_MAX_AP_VDEV]; 5553 } __packed; 5554 5555 struct wmi_peer_create_cmd { 5556 __le32 vdev_id; 5557 struct wmi_mac_addr peer_macaddr; 5558 } __packed; 5559 5560 enum wmi_peer_type { 5561 WMI_PEER_TYPE_DEFAULT = 0, 5562 WMI_PEER_TYPE_BSS = 1, 5563 WMI_PEER_TYPE_TDLS = 2, 5564 }; 5565 5566 struct wmi_peer_delete_cmd { 5567 __le32 vdev_id; 5568 struct wmi_mac_addr peer_macaddr; 5569 } __packed; 5570 5571 struct wmi_peer_flush_tids_cmd { 5572 __le32 vdev_id; 5573 struct wmi_mac_addr peer_macaddr; 5574 __le32 peer_tid_bitmap; 5575 } __packed; 5576 5577 struct wmi_fixed_rate { 5578 /* 5579 * rate mode . 0: disable fixed rate (auto rate) 5580 * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps 5581 * 2: ht20 11n rate specified as mcs index 5582 * 3: ht40 11n rate specified as mcs index 5583 */ 5584 __le32 rate_mode; 5585 /* 5586 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB) 5587 * and series 3 is stored at byte 3 (MSB) 5588 */ 5589 __le32 rate_series; 5590 /* 5591 * 4 retry counts for 4 rate series. retry count for rate 0 is stored 5592 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3 5593 * (MSB) 5594 */ 5595 __le32 rate_retries; 5596 } __packed; 5597 5598 struct wmi_peer_fixed_rate_cmd { 5599 /* unique id identifying the VDEV, generated by the caller */ 5600 __le32 vdev_id; 5601 /* peer MAC address */ 5602 struct wmi_mac_addr peer_macaddr; 5603 /* fixed rate */ 5604 struct wmi_fixed_rate peer_fixed_rate; 5605 } __packed; 5606 5607 #define WMI_MGMT_TID 17 5608 5609 struct wmi_addba_clear_resp_cmd { 5610 /* unique id identifying the VDEV, generated by the caller */ 5611 __le32 vdev_id; 5612 /* peer MAC address */ 5613 struct wmi_mac_addr peer_macaddr; 5614 } __packed; 5615 5616 struct wmi_addba_send_cmd { 5617 /* unique id identifying the VDEV, generated by the caller */ 5618 __le32 vdev_id; 5619 /* peer MAC address */ 5620 struct wmi_mac_addr peer_macaddr; 5621 /* Tid number */ 5622 __le32 tid; 5623 /* Buffer/Window size*/ 5624 __le32 buffersize; 5625 } __packed; 5626 5627 struct wmi_delba_send_cmd { 5628 /* unique id identifying the VDEV, generated by the caller */ 5629 __le32 vdev_id; 5630 /* peer MAC address */ 5631 struct wmi_mac_addr peer_macaddr; 5632 /* Tid number */ 5633 __le32 tid; 5634 /* Is Initiator */ 5635 __le32 initiator; 5636 /* Reason code */ 5637 __le32 reasoncode; 5638 } __packed; 5639 5640 struct wmi_addba_setresponse_cmd { 5641 /* unique id identifying the vdev, generated by the caller */ 5642 __le32 vdev_id; 5643 /* peer mac address */ 5644 struct wmi_mac_addr peer_macaddr; 5645 /* Tid number */ 5646 __le32 tid; 5647 /* status code */ 5648 __le32 statuscode; 5649 } __packed; 5650 5651 struct wmi_send_singleamsdu_cmd { 5652 /* unique id identifying the vdev, generated by the caller */ 5653 __le32 vdev_id; 5654 /* peer mac address */ 5655 struct wmi_mac_addr peer_macaddr; 5656 /* Tid number */ 5657 __le32 tid; 5658 } __packed; 5659 5660 enum wmi_peer_smps_state { 5661 WMI_PEER_SMPS_PS_NONE = 0x0, 5662 WMI_PEER_SMPS_STATIC = 0x1, 5663 WMI_PEER_SMPS_DYNAMIC = 0x2 5664 }; 5665 5666 enum wmi_peer_chwidth { 5667 WMI_PEER_CHWIDTH_20MHZ = 0, 5668 WMI_PEER_CHWIDTH_40MHZ = 1, 5669 WMI_PEER_CHWIDTH_80MHZ = 2, 5670 }; 5671 5672 enum wmi_peer_param { 5673 WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */ 5674 WMI_PEER_AMPDU = 0x2, 5675 WMI_PEER_AUTHORIZE = 0x3, 5676 WMI_PEER_CHAN_WIDTH = 0x4, 5677 WMI_PEER_NSS = 0x5, 5678 WMI_PEER_USE_4ADDR = 0x6, 5679 WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */ 5680 }; 5681 5682 struct wmi_peer_set_param_cmd { 5683 __le32 vdev_id; 5684 struct wmi_mac_addr peer_macaddr; 5685 __le32 param_id; 5686 __le32 param_value; 5687 } __packed; 5688 5689 #define MAX_SUPPORTED_RATES 128 5690 5691 struct wmi_rate_set { 5692 /* total number of rates */ 5693 __le32 num_rates; 5694 /* 5695 * rates (each 8bit value) packed into a 32 bit word. 5696 * the rates are filled from least significant byte to most 5697 * significant byte. 5698 */ 5699 __le32 rates[(MAX_SUPPORTED_RATES/4)+1]; 5700 } __packed; 5701 5702 struct wmi_rate_set_arg { 5703 unsigned int num_rates; 5704 u8 rates[MAX_SUPPORTED_RATES]; 5705 }; 5706 5707 /* 5708 * NOTE: It would bea good idea to represent the Tx MCS 5709 * info in one word and Rx in another word. This is split 5710 * into multiple words for convenience 5711 */ 5712 struct wmi_vht_rate_set { 5713 __le32 rx_max_rate; /* Max Rx data rate */ 5714 __le32 rx_mcs_set; /* Negotiated RX VHT rates */ 5715 __le32 tx_max_rate; /* Max Tx data rate */ 5716 __le32 tx_mcs_set; /* Negotiated TX VHT rates */ 5717 } __packed; 5718 5719 struct wmi_vht_rate_set_arg { 5720 u32 rx_max_rate; 5721 u32 rx_mcs_set; 5722 u32 tx_max_rate; 5723 u32 tx_mcs_set; 5724 }; 5725 5726 struct wmi_peer_set_rates_cmd { 5727 /* peer MAC address */ 5728 struct wmi_mac_addr peer_macaddr; 5729 /* legacy rate set */ 5730 struct wmi_rate_set peer_legacy_rates; 5731 /* ht rate set */ 5732 struct wmi_rate_set peer_ht_rates; 5733 } __packed; 5734 5735 struct wmi_peer_set_q_empty_callback_cmd { 5736 /* unique id identifying the VDEV, generated by the caller */ 5737 __le32 vdev_id; 5738 /* peer MAC address */ 5739 struct wmi_mac_addr peer_macaddr; 5740 __le32 callback_enable; 5741 } __packed; 5742 5743 struct wmi_peer_flags_map { 5744 u32 auth; 5745 u32 qos; 5746 u32 need_ptk_4_way; 5747 u32 need_gtk_2_way; 5748 u32 apsd; 5749 u32 ht; 5750 u32 bw40; 5751 u32 stbc; 5752 u32 ldbc; 5753 u32 dyn_mimops; 5754 u32 static_mimops; 5755 u32 spatial_mux; 5756 u32 vht; 5757 u32 bw80; 5758 u32 vht_2g; 5759 u32 pmf; 5760 }; 5761 5762 enum wmi_peer_flags { 5763 WMI_PEER_AUTH = 0x00000001, 5764 WMI_PEER_QOS = 0x00000002, 5765 WMI_PEER_NEED_PTK_4_WAY = 0x00000004, 5766 WMI_PEER_NEED_GTK_2_WAY = 0x00000010, 5767 WMI_PEER_APSD = 0x00000800, 5768 WMI_PEER_HT = 0x00001000, 5769 WMI_PEER_40MHZ = 0x00002000, 5770 WMI_PEER_STBC = 0x00008000, 5771 WMI_PEER_LDPC = 0x00010000, 5772 WMI_PEER_DYN_MIMOPS = 0x00020000, 5773 WMI_PEER_STATIC_MIMOPS = 0x00040000, 5774 WMI_PEER_SPATIAL_MUX = 0x00200000, 5775 WMI_PEER_VHT = 0x02000000, 5776 WMI_PEER_80MHZ = 0x04000000, 5777 WMI_PEER_VHT_2G = 0x08000000, 5778 WMI_PEER_PMF = 0x10000000, 5779 }; 5780 5781 enum wmi_10x_peer_flags { 5782 WMI_10X_PEER_AUTH = 0x00000001, 5783 WMI_10X_PEER_QOS = 0x00000002, 5784 WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004, 5785 WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010, 5786 WMI_10X_PEER_APSD = 0x00000800, 5787 WMI_10X_PEER_HT = 0x00001000, 5788 WMI_10X_PEER_40MHZ = 0x00002000, 5789 WMI_10X_PEER_STBC = 0x00008000, 5790 WMI_10X_PEER_LDPC = 0x00010000, 5791 WMI_10X_PEER_DYN_MIMOPS = 0x00020000, 5792 WMI_10X_PEER_STATIC_MIMOPS = 0x00040000, 5793 WMI_10X_PEER_SPATIAL_MUX = 0x00200000, 5794 WMI_10X_PEER_VHT = 0x02000000, 5795 WMI_10X_PEER_80MHZ = 0x04000000, 5796 }; 5797 5798 enum wmi_10_2_peer_flags { 5799 WMI_10_2_PEER_AUTH = 0x00000001, 5800 WMI_10_2_PEER_QOS = 0x00000002, 5801 WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004, 5802 WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010, 5803 WMI_10_2_PEER_APSD = 0x00000800, 5804 WMI_10_2_PEER_HT = 0x00001000, 5805 WMI_10_2_PEER_40MHZ = 0x00002000, 5806 WMI_10_2_PEER_STBC = 0x00008000, 5807 WMI_10_2_PEER_LDPC = 0x00010000, 5808 WMI_10_2_PEER_DYN_MIMOPS = 0x00020000, 5809 WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000, 5810 WMI_10_2_PEER_SPATIAL_MUX = 0x00200000, 5811 WMI_10_2_PEER_VHT = 0x02000000, 5812 WMI_10_2_PEER_80MHZ = 0x04000000, 5813 WMI_10_2_PEER_VHT_2G = 0x08000000, 5814 WMI_10_2_PEER_PMF = 0x10000000, 5815 }; 5816 5817 /* 5818 * Peer rate capabilities. 5819 * 5820 * This is of interest to the ratecontrol 5821 * module which resides in the firmware. The bit definitions are 5822 * consistent with that defined in if_athrate.c. 5823 */ 5824 #define WMI_RC_DS_FLAG 0x01 5825 #define WMI_RC_CW40_FLAG 0x02 5826 #define WMI_RC_SGI_FLAG 0x04 5827 #define WMI_RC_HT_FLAG 0x08 5828 #define WMI_RC_RTSCTS_FLAG 0x10 5829 #define WMI_RC_TX_STBC_FLAG 0x20 5830 #define WMI_RC_RX_STBC_FLAG 0xC0 5831 #define WMI_RC_RX_STBC_FLAG_S 6 5832 #define WMI_RC_WEP_TKIP_FLAG 0x100 5833 #define WMI_RC_TS_FLAG 0x200 5834 #define WMI_RC_UAPSD_FLAG 0x400 5835 5836 /* Maximum listen interval supported by hw in units of beacon interval */ 5837 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5 5838 5839 struct wmi_common_peer_assoc_complete_cmd { 5840 struct wmi_mac_addr peer_macaddr; 5841 __le32 vdev_id; 5842 __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */ 5843 __le32 peer_associd; /* 16 LSBs */ 5844 __le32 peer_flags; 5845 __le32 peer_caps; /* 16 LSBs */ 5846 __le32 peer_listen_intval; 5847 __le32 peer_ht_caps; 5848 __le32 peer_max_mpdu; 5849 __le32 peer_mpdu_density; /* 0..16 */ 5850 __le32 peer_rate_caps; 5851 struct wmi_rate_set peer_legacy_rates; 5852 struct wmi_rate_set peer_ht_rates; 5853 __le32 peer_nss; /* num of spatial streams */ 5854 __le32 peer_vht_caps; 5855 __le32 peer_phymode; 5856 struct wmi_vht_rate_set peer_vht_rates; 5857 }; 5858 5859 struct wmi_main_peer_assoc_complete_cmd { 5860 struct wmi_common_peer_assoc_complete_cmd cmd; 5861 5862 /* HT Operation Element of the peer. Five bytes packed in 2 5863 * INT32 array and filled from lsb to msb. */ 5864 __le32 peer_ht_info[2]; 5865 } __packed; 5866 5867 struct wmi_10_1_peer_assoc_complete_cmd { 5868 struct wmi_common_peer_assoc_complete_cmd cmd; 5869 } __packed; 5870 5871 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0 5872 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f 5873 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4 5874 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0 5875 5876 struct wmi_10_2_peer_assoc_complete_cmd { 5877 struct wmi_common_peer_assoc_complete_cmd cmd; 5878 __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */ 5879 } __packed; 5880 5881 struct wmi_10_4_peer_assoc_complete_cmd { 5882 struct wmi_10_2_peer_assoc_complete_cmd cmd; 5883 __le32 peer_bw_rxnss_override; 5884 } __packed; 5885 5886 struct wmi_peer_assoc_complete_arg { 5887 u8 addr[ETH_ALEN]; 5888 u32 vdev_id; 5889 bool peer_reassoc; 5890 u16 peer_aid; 5891 u32 peer_flags; /* see %WMI_PEER_ */ 5892 u16 peer_caps; 5893 u32 peer_listen_intval; 5894 u32 peer_ht_caps; 5895 u32 peer_max_mpdu; 5896 u32 peer_mpdu_density; /* 0..16 */ 5897 u32 peer_rate_caps; /* see %WMI_RC_ */ 5898 struct wmi_rate_set_arg peer_legacy_rates; 5899 struct wmi_rate_set_arg peer_ht_rates; 5900 u32 peer_num_spatial_streams; 5901 u32 peer_vht_caps; 5902 enum wmi_phy_mode peer_phymode; 5903 struct wmi_vht_rate_set_arg peer_vht_rates; 5904 }; 5905 5906 struct wmi_peer_add_wds_entry_cmd { 5907 /* peer MAC address */ 5908 struct wmi_mac_addr peer_macaddr; 5909 /* wds MAC addr */ 5910 struct wmi_mac_addr wds_macaddr; 5911 } __packed; 5912 5913 struct wmi_peer_remove_wds_entry_cmd { 5914 /* wds MAC addr */ 5915 struct wmi_mac_addr wds_macaddr; 5916 } __packed; 5917 5918 struct wmi_peer_q_empty_callback_event { 5919 /* peer MAC address */ 5920 struct wmi_mac_addr peer_macaddr; 5921 } __packed; 5922 5923 /* 5924 * Channel info WMI event 5925 */ 5926 struct wmi_chan_info_event { 5927 __le32 err_code; 5928 __le32 freq; 5929 __le32 cmd_flags; 5930 __le32 noise_floor; 5931 __le32 rx_clear_count; 5932 __le32 cycle_count; 5933 } __packed; 5934 5935 struct wmi_10_4_chan_info_event { 5936 __le32 err_code; 5937 __le32 freq; 5938 __le32 cmd_flags; 5939 __le32 noise_floor; 5940 __le32 rx_clear_count; 5941 __le32 cycle_count; 5942 __le32 chan_tx_pwr_range; 5943 __le32 chan_tx_pwr_tp; 5944 __le32 rx_frame_count; 5945 } __packed; 5946 5947 struct wmi_peer_sta_kickout_event { 5948 struct wmi_mac_addr peer_macaddr; 5949 } __packed; 5950 5951 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0) 5952 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1) 5953 5954 /* Beacon filter wmi command info */ 5955 #define BCN_FLT_MAX_SUPPORTED_IES 256 5956 #define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32) 5957 5958 struct bss_bcn_stats { 5959 __le32 vdev_id; 5960 __le32 bss_bcnsdropped; 5961 __le32 bss_bcnsdelivered; 5962 } __packed; 5963 5964 struct bcn_filter_stats { 5965 __le32 bcns_dropped; 5966 __le32 bcns_delivered; 5967 __le32 activefilters; 5968 struct bss_bcn_stats bss_stats; 5969 } __packed; 5970 5971 struct wmi_add_bcn_filter_cmd { 5972 u32 vdev_id; 5973 u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST]; 5974 } __packed; 5975 5976 enum wmi_sta_keepalive_method { 5977 WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1, 5978 WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2, 5979 }; 5980 5981 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0 5982 5983 /* Firmware crashes if keepalive interval exceeds this limit */ 5984 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff 5985 5986 /* note: ip4 addresses are in network byte order, i.e. big endian */ 5987 struct wmi_sta_keepalive_arp_resp { 5988 __be32 src_ip4_addr; 5989 __be32 dest_ip4_addr; 5990 struct wmi_mac_addr dest_mac_addr; 5991 } __packed; 5992 5993 struct wmi_sta_keepalive_cmd { 5994 __le32 vdev_id; 5995 __le32 enabled; 5996 __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */ 5997 __le32 interval; /* in seconds */ 5998 struct wmi_sta_keepalive_arp_resp arp_resp; 5999 } __packed; 6000 6001 struct wmi_sta_keepalive_arg { 6002 u32 vdev_id; 6003 u32 enabled; 6004 u32 method; 6005 u32 interval; 6006 __be32 src_ip4_addr; 6007 __be32 dest_ip4_addr; 6008 const u8 dest_mac_addr[ETH_ALEN]; 6009 }; 6010 6011 enum wmi_force_fw_hang_type { 6012 WMI_FORCE_FW_HANG_ASSERT = 1, 6013 WMI_FORCE_FW_HANG_NO_DETECT, 6014 WMI_FORCE_FW_HANG_CTRL_EP_FULL, 6015 WMI_FORCE_FW_HANG_EMPTY_POINT, 6016 WMI_FORCE_FW_HANG_STACK_OVERFLOW, 6017 WMI_FORCE_FW_HANG_INFINITE_LOOP, 6018 }; 6019 6020 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF 6021 6022 struct wmi_force_fw_hang_cmd { 6023 __le32 type; 6024 __le32 delay_ms; 6025 } __packed; 6026 6027 enum ath10k_dbglog_level { 6028 ATH10K_DBGLOG_LEVEL_VERBOSE = 0, 6029 ATH10K_DBGLOG_LEVEL_INFO = 1, 6030 ATH10K_DBGLOG_LEVEL_WARN = 2, 6031 ATH10K_DBGLOG_LEVEL_ERR = 3, 6032 }; 6033 6034 /* VAP ids to enable dbglog */ 6035 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0 6036 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff 6037 6038 /* to enable dbglog in the firmware */ 6039 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16 6040 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000 6041 6042 /* timestamp resolution */ 6043 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17 6044 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000 6045 6046 /* number of queued messages before sending them to the host */ 6047 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20 6048 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000 6049 6050 /* 6051 * Log levels to enable. This defines the minimum level to enable, this is 6052 * not a bitmask. See enum ath10k_dbglog_level for the values. 6053 */ 6054 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28 6055 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000 6056 6057 /* 6058 * Note: this is a cleaned up version of a struct firmware uses. For 6059 * example, config_valid was hidden inside an array. 6060 */ 6061 struct wmi_dbglog_cfg_cmd { 6062 /* bitmask to hold mod id config*/ 6063 __le32 module_enable; 6064 6065 /* see ATH10K_DBGLOG_CFG_ */ 6066 __le32 config_enable; 6067 6068 /* mask of module id bits to be changed */ 6069 __le32 module_valid; 6070 6071 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6072 __le32 config_valid; 6073 } __packed; 6074 6075 enum wmi_roam_reason { 6076 WMI_ROAM_REASON_BETTER_AP = 1, 6077 WMI_ROAM_REASON_BEACON_MISS = 2, 6078 WMI_ROAM_REASON_LOW_RSSI = 3, 6079 WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4, 6080 WMI_ROAM_REASON_HO_FAILED = 5, 6081 6082 /* keep last */ 6083 WMI_ROAM_REASON_MAX, 6084 }; 6085 6086 struct wmi_roam_ev { 6087 __le32 vdev_id; 6088 __le32 reason; 6089 } __packed; 6090 6091 #define ATH10K_FRAGMT_THRESHOLD_MIN 540 6092 #define ATH10K_FRAGMT_THRESHOLD_MAX 2346 6093 6094 #define WMI_MAX_EVENT 0x1000 6095 /* Maximum number of pending TXed WMI packets */ 6096 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr) 6097 6098 /* By default disable power save for IBSS */ 6099 #define ATH10K_DEFAULT_ATIM 0 6100 6101 #define WMI_MAX_MEM_REQS 16 6102 6103 struct wmi_scan_ev_arg { 6104 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 6105 __le32 reason; /* %WMI_SCAN_REASON_ */ 6106 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 6107 __le32 scan_req_id; 6108 __le32 scan_id; 6109 __le32 vdev_id; 6110 }; 6111 6112 struct wmi_mgmt_rx_ev_arg { 6113 __le32 channel; 6114 __le32 snr; 6115 __le32 rate; 6116 __le32 phy_mode; 6117 __le32 buf_len; 6118 __le32 status; /* %WMI_RX_STATUS_ */ 6119 }; 6120 6121 struct wmi_ch_info_ev_arg { 6122 __le32 err_code; 6123 __le32 freq; 6124 __le32 cmd_flags; 6125 __le32 noise_floor; 6126 __le32 rx_clear_count; 6127 __le32 cycle_count; 6128 __le32 chan_tx_pwr_range; 6129 __le32 chan_tx_pwr_tp; 6130 __le32 rx_frame_count; 6131 }; 6132 6133 struct wmi_vdev_start_ev_arg { 6134 __le32 vdev_id; 6135 __le32 req_id; 6136 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 6137 __le32 status; 6138 }; 6139 6140 struct wmi_peer_kick_ev_arg { 6141 const u8 *mac_addr; 6142 }; 6143 6144 struct wmi_swba_ev_arg { 6145 __le32 vdev_map; 6146 struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV]; 6147 const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV]; 6148 }; 6149 6150 struct wmi_phyerr_ev_arg { 6151 u32 tsf_timestamp; 6152 u16 freq1; 6153 u16 freq2; 6154 u8 rssi_combined; 6155 u8 chan_width_mhz; 6156 u8 phy_err_code; 6157 u16 nf_chains[4]; 6158 u32 buf_len; 6159 const u8 *buf; 6160 u8 hdr_len; 6161 }; 6162 6163 struct wmi_phyerr_hdr_arg { 6164 u32 num_phyerrs; 6165 u32 tsf_l32; 6166 u32 tsf_u32; 6167 u32 buf_len; 6168 const void *phyerrs; 6169 }; 6170 6171 struct wmi_svc_rdy_ev_arg { 6172 __le32 min_tx_power; 6173 __le32 max_tx_power; 6174 __le32 ht_cap; 6175 __le32 vht_cap; 6176 __le32 sw_ver0; 6177 __le32 sw_ver1; 6178 __le32 fw_build; 6179 __le32 phy_capab; 6180 __le32 num_rf_chains; 6181 __le32 eeprom_rd; 6182 __le32 num_mem_reqs; 6183 const __le32 *service_map; 6184 size_t service_map_len; 6185 const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS]; 6186 }; 6187 6188 struct wmi_rdy_ev_arg { 6189 __le32 sw_version; 6190 __le32 abi_version; 6191 __le32 status; 6192 const u8 *mac_addr; 6193 }; 6194 6195 struct wmi_roam_ev_arg { 6196 __le32 vdev_id; 6197 __le32 reason; 6198 __le32 rssi; 6199 }; 6200 6201 struct wmi_pdev_temperature_event { 6202 /* temperature value in Celcius degree */ 6203 __le32 temperature; 6204 } __packed; 6205 6206 /* WOW structures */ 6207 enum wmi_wow_wakeup_event { 6208 WOW_BMISS_EVENT = 0, 6209 WOW_BETTER_AP_EVENT, 6210 WOW_DEAUTH_RECVD_EVENT, 6211 WOW_MAGIC_PKT_RECVD_EVENT, 6212 WOW_GTK_ERR_EVENT, 6213 WOW_FOURWAY_HSHAKE_EVENT, 6214 WOW_EAPOL_RECVD_EVENT, 6215 WOW_NLO_DETECTED_EVENT, 6216 WOW_DISASSOC_RECVD_EVENT, 6217 WOW_PATTERN_MATCH_EVENT, 6218 WOW_CSA_IE_EVENT, 6219 WOW_PROBE_REQ_WPS_IE_EVENT, 6220 WOW_AUTH_REQ_EVENT, 6221 WOW_ASSOC_REQ_EVENT, 6222 WOW_HTT_EVENT, 6223 WOW_RA_MATCH_EVENT, 6224 WOW_HOST_AUTO_SHUTDOWN_EVENT, 6225 WOW_IOAC_MAGIC_EVENT, 6226 WOW_IOAC_SHORT_EVENT, 6227 WOW_IOAC_EXTEND_EVENT, 6228 WOW_IOAC_TIMER_EVENT, 6229 WOW_DFS_PHYERR_RADAR_EVENT, 6230 WOW_BEACON_EVENT, 6231 WOW_CLIENT_KICKOUT_EVENT, 6232 WOW_EVENT_MAX, 6233 }; 6234 6235 #define C2S(x) case x: return #x 6236 6237 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev) 6238 { 6239 switch (ev) { 6240 C2S(WOW_BMISS_EVENT); 6241 C2S(WOW_BETTER_AP_EVENT); 6242 C2S(WOW_DEAUTH_RECVD_EVENT); 6243 C2S(WOW_MAGIC_PKT_RECVD_EVENT); 6244 C2S(WOW_GTK_ERR_EVENT); 6245 C2S(WOW_FOURWAY_HSHAKE_EVENT); 6246 C2S(WOW_EAPOL_RECVD_EVENT); 6247 C2S(WOW_NLO_DETECTED_EVENT); 6248 C2S(WOW_DISASSOC_RECVD_EVENT); 6249 C2S(WOW_PATTERN_MATCH_EVENT); 6250 C2S(WOW_CSA_IE_EVENT); 6251 C2S(WOW_PROBE_REQ_WPS_IE_EVENT); 6252 C2S(WOW_AUTH_REQ_EVENT); 6253 C2S(WOW_ASSOC_REQ_EVENT); 6254 C2S(WOW_HTT_EVENT); 6255 C2S(WOW_RA_MATCH_EVENT); 6256 C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT); 6257 C2S(WOW_IOAC_MAGIC_EVENT); 6258 C2S(WOW_IOAC_SHORT_EVENT); 6259 C2S(WOW_IOAC_EXTEND_EVENT); 6260 C2S(WOW_IOAC_TIMER_EVENT); 6261 C2S(WOW_DFS_PHYERR_RADAR_EVENT); 6262 C2S(WOW_BEACON_EVENT); 6263 C2S(WOW_CLIENT_KICKOUT_EVENT); 6264 C2S(WOW_EVENT_MAX); 6265 default: 6266 return NULL; 6267 } 6268 } 6269 6270 enum wmi_wow_wake_reason { 6271 WOW_REASON_UNSPECIFIED = -1, 6272 WOW_REASON_NLOD = 0, 6273 WOW_REASON_AP_ASSOC_LOST, 6274 WOW_REASON_LOW_RSSI, 6275 WOW_REASON_DEAUTH_RECVD, 6276 WOW_REASON_DISASSOC_RECVD, 6277 WOW_REASON_GTK_HS_ERR, 6278 WOW_REASON_EAP_REQ, 6279 WOW_REASON_FOURWAY_HS_RECV, 6280 WOW_REASON_TIMER_INTR_RECV, 6281 WOW_REASON_PATTERN_MATCH_FOUND, 6282 WOW_REASON_RECV_MAGIC_PATTERN, 6283 WOW_REASON_P2P_DISC, 6284 WOW_REASON_WLAN_HB, 6285 WOW_REASON_CSA_EVENT, 6286 WOW_REASON_PROBE_REQ_WPS_IE_RECV, 6287 WOW_REASON_AUTH_REQ_RECV, 6288 WOW_REASON_ASSOC_REQ_RECV, 6289 WOW_REASON_HTT_EVENT, 6290 WOW_REASON_RA_MATCH, 6291 WOW_REASON_HOST_AUTO_SHUTDOWN, 6292 WOW_REASON_IOAC_MAGIC_EVENT, 6293 WOW_REASON_IOAC_SHORT_EVENT, 6294 WOW_REASON_IOAC_EXTEND_EVENT, 6295 WOW_REASON_IOAC_TIMER_EVENT, 6296 WOW_REASON_ROAM_HO, 6297 WOW_REASON_DFS_PHYERR_RADADR_EVENT, 6298 WOW_REASON_BEACON_RECV, 6299 WOW_REASON_CLIENT_KICKOUT_EVENT, 6300 WOW_REASON_DEBUG_TEST = 0xFF, 6301 }; 6302 6303 static inline const char *wow_reason(enum wmi_wow_wake_reason reason) 6304 { 6305 switch (reason) { 6306 C2S(WOW_REASON_UNSPECIFIED); 6307 C2S(WOW_REASON_NLOD); 6308 C2S(WOW_REASON_AP_ASSOC_LOST); 6309 C2S(WOW_REASON_LOW_RSSI); 6310 C2S(WOW_REASON_DEAUTH_RECVD); 6311 C2S(WOW_REASON_DISASSOC_RECVD); 6312 C2S(WOW_REASON_GTK_HS_ERR); 6313 C2S(WOW_REASON_EAP_REQ); 6314 C2S(WOW_REASON_FOURWAY_HS_RECV); 6315 C2S(WOW_REASON_TIMER_INTR_RECV); 6316 C2S(WOW_REASON_PATTERN_MATCH_FOUND); 6317 C2S(WOW_REASON_RECV_MAGIC_PATTERN); 6318 C2S(WOW_REASON_P2P_DISC); 6319 C2S(WOW_REASON_WLAN_HB); 6320 C2S(WOW_REASON_CSA_EVENT); 6321 C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV); 6322 C2S(WOW_REASON_AUTH_REQ_RECV); 6323 C2S(WOW_REASON_ASSOC_REQ_RECV); 6324 C2S(WOW_REASON_HTT_EVENT); 6325 C2S(WOW_REASON_RA_MATCH); 6326 C2S(WOW_REASON_HOST_AUTO_SHUTDOWN); 6327 C2S(WOW_REASON_IOAC_MAGIC_EVENT); 6328 C2S(WOW_REASON_IOAC_SHORT_EVENT); 6329 C2S(WOW_REASON_IOAC_EXTEND_EVENT); 6330 C2S(WOW_REASON_IOAC_TIMER_EVENT); 6331 C2S(WOW_REASON_ROAM_HO); 6332 C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT); 6333 C2S(WOW_REASON_BEACON_RECV); 6334 C2S(WOW_REASON_CLIENT_KICKOUT_EVENT); 6335 C2S(WOW_REASON_DEBUG_TEST); 6336 default: 6337 return NULL; 6338 } 6339 } 6340 6341 #undef C2S 6342 6343 struct wmi_wow_ev_arg { 6344 u32 vdev_id; 6345 u32 flag; 6346 enum wmi_wow_wake_reason wake_reason; 6347 u32 data_len; 6348 }; 6349 6350 #define WOW_MIN_PATTERN_SIZE 1 6351 #define WOW_MAX_PATTERN_SIZE 148 6352 #define WOW_MAX_PKT_OFFSET 128 6353 6354 enum wmi_tdls_state { 6355 WMI_TDLS_DISABLE, 6356 WMI_TDLS_ENABLE_PASSIVE, 6357 WMI_TDLS_ENABLE_ACTIVE, 6358 }; 6359 6360 enum wmi_tdls_peer_state { 6361 WMI_TDLS_PEER_STATE_PEERING, 6362 WMI_TDLS_PEER_STATE_CONNECTED, 6363 WMI_TDLS_PEER_STATE_TEARDOWN, 6364 }; 6365 6366 struct wmi_tdls_peer_update_cmd_arg { 6367 u32 vdev_id; 6368 enum wmi_tdls_peer_state peer_state; 6369 u8 addr[ETH_ALEN]; 6370 }; 6371 6372 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32 6373 6374 struct wmi_tdls_peer_capab_arg { 6375 u8 peer_uapsd_queues; 6376 u8 peer_max_sp; 6377 u32 buff_sta_support; 6378 u32 off_chan_support; 6379 u32 peer_curr_operclass; 6380 u32 self_curr_operclass; 6381 u32 peer_chan_len; 6382 u32 peer_operclass_len; 6383 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 6384 u32 is_peer_responder; 6385 u32 pref_offchan_num; 6386 u32 pref_offchan_bw; 6387 }; 6388 6389 enum wmi_txbf_conf { 6390 WMI_TXBF_CONF_UNSUPPORTED, 6391 WMI_TXBF_CONF_BEFORE_ASSOC, 6392 WMI_TXBF_CONF_AFTER_ASSOC, 6393 }; 6394 6395 #define WMI_CCA_DETECT_LEVEL_AUTO 0 6396 #define WMI_CCA_DETECT_MARGIN_AUTO 0 6397 6398 struct wmi_pdev_set_adaptive_cca_params { 6399 __le32 enable; 6400 __le32 cca_detect_level; 6401 __le32 cca_detect_margin; 6402 } __packed; 6403 6404 struct ath10k; 6405 struct ath10k_vif; 6406 struct ath10k_fw_stats_pdev; 6407 struct ath10k_fw_stats_peer; 6408 struct ath10k_fw_stats; 6409 6410 int ath10k_wmi_attach(struct ath10k *ar); 6411 void ath10k_wmi_detach(struct ath10k *ar); 6412 void ath10k_wmi_free_host_mem(struct ath10k *ar); 6413 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar); 6414 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar); 6415 6416 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 6417 int ath10k_wmi_connect(struct ath10k *ar); 6418 6419 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 6420 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); 6421 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb, 6422 u32 cmd_id); 6423 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *); 6424 6425 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src, 6426 struct ath10k_fw_stats_pdev *dst); 6427 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src, 6428 struct ath10k_fw_stats_pdev *dst); 6429 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src, 6430 struct ath10k_fw_stats_pdev *dst); 6431 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src, 6432 struct ath10k_fw_stats_pdev *dst); 6433 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src, 6434 struct ath10k_fw_stats_peer *dst); 6435 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar, 6436 struct wmi_host_mem_chunks *chunks); 6437 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn, 6438 const struct wmi_start_scan_arg *arg); 6439 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params, 6440 const struct wmi_wmm_params_arg *arg); 6441 void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch, 6442 const struct wmi_channel_arg *arg); 6443 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg); 6444 6445 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb); 6446 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb); 6447 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb); 6448 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb); 6449 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb); 6450 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb); 6451 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb); 6452 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb); 6453 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb); 6454 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb); 6455 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb); 6456 void ath10k_wmi_event_dfs(struct ath10k *ar, 6457 struct wmi_phyerr_ev_arg *phyerr, u64 tsf); 6458 void ath10k_wmi_event_spectral_scan(struct ath10k *ar, 6459 struct wmi_phyerr_ev_arg *phyerr, 6460 u64 tsf); 6461 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb); 6462 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb); 6463 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb); 6464 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb); 6465 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb); 6466 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb); 6467 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar, 6468 struct sk_buff *skb); 6469 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar, 6470 struct sk_buff *skb); 6471 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb); 6472 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb); 6473 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb); 6474 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb); 6475 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb); 6476 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar, 6477 struct sk_buff *skb); 6478 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb); 6479 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb); 6480 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb); 6481 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar, 6482 struct sk_buff *skb); 6483 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb); 6484 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb); 6485 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb); 6486 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb); 6487 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb); 6488 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf, 6489 int left_len, struct wmi_phyerr_ev_arg *arg); 6490 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar, 6491 struct ath10k_fw_stats *fw_stats, 6492 char *buf); 6493 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar, 6494 struct ath10k_fw_stats *fw_stats, 6495 char *buf); 6496 size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head); 6497 size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head); 6498 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar, 6499 struct ath10k_fw_stats *fw_stats, 6500 char *buf); 6501 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar, 6502 enum wmi_vdev_subtype subtype); 6503 6504 #endif /* _WMI_H_ */ 6505