1 /* 2 * Copyright (c) 2005-2011 Atheros Communications Inc. 3 * Copyright (c) 2011-2013 Qualcomm Atheros, Inc. 4 * 5 * Permission to use, copy, modify, and/or distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 */ 17 18 #ifndef _WMI_H_ 19 #define _WMI_H_ 20 21 #include <linux/types.h> 22 #include <net/mac80211.h> 23 24 /* 25 * This file specifies the WMI interface for the Unified Software 26 * Architecture. 27 * 28 * It includes definitions of all the commands and events. Commands are 29 * messages from the host to the target. Events and Replies are messages 30 * from the target to the host. 31 * 32 * Ownership of correctness in regards to WMI commands belongs to the host 33 * driver and the target is not required to validate parameters for value, 34 * proper range, or any other checking. 35 * 36 * Guidelines for extending this interface are below. 37 * 38 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff 39 * 40 * 2. Use ONLY u32 type for defining member variables within WMI 41 * command/event structures. Do not use u8, u16, bool or 42 * enum types within these structures. 43 * 44 * 3. DO NOT define bit fields within structures. Implement bit fields 45 * using masks if necessary. Do not use the programming language's bit 46 * field definition. 47 * 48 * 4. Define macros for encode/decode of u8, u16 fields within 49 * the u32 variables. Use these macros for set/get of these fields. 50 * Try to use this to optimize the structure without bloating it with 51 * u32 variables for every lower sized field. 52 * 53 * 5. Do not use PACK/UNPACK attributes for the structures as each member 54 * variable is already 4-byte aligned by virtue of being a u32 55 * type. 56 * 57 * 6. Comment each parameter part of the WMI command/event structure by 58 * using the 2 stars at the beginning of C comment instead of one star to 59 * enable HTML document generation using Doxygen. 60 * 61 */ 62 63 /* Control Path */ 64 struct wmi_cmd_hdr { 65 __le32 cmd_id; 66 } __packed; 67 68 #define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF 69 #define WMI_CMD_HDR_CMD_ID_LSB 0 70 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000 71 #define WMI_CMD_HDR_PLT_PRIV_LSB 24 72 73 #define HTC_PROTOCOL_VERSION 0x0002 74 #define WMI_PROTOCOL_VERSION 0x0002 75 76 /* 77 * There is no signed version of __le32, so for a temporary solution come 78 * up with our own version. The idea is from fs/ntfs/types.h. 79 * 80 * Use a_ prefix so that it doesn't conflict if we get proper support to 81 * linux/types.h. 82 */ 83 typedef __s32 __bitwise a_sle32; 84 85 static inline a_sle32 a_cpu_to_sle32(s32 val) 86 { 87 return (__force a_sle32)cpu_to_le32(val); 88 } 89 90 static inline s32 a_sle32_to_cpu(a_sle32 val) 91 { 92 return le32_to_cpu((__force __le32)val); 93 } 94 95 enum wmi_service { 96 WMI_SERVICE_BEACON_OFFLOAD = 0, 97 WMI_SERVICE_SCAN_OFFLOAD, 98 WMI_SERVICE_ROAM_OFFLOAD, 99 WMI_SERVICE_BCN_MISS_OFFLOAD, 100 WMI_SERVICE_STA_PWRSAVE, 101 WMI_SERVICE_STA_ADVANCED_PWRSAVE, 102 WMI_SERVICE_AP_UAPSD, 103 WMI_SERVICE_AP_DFS, 104 WMI_SERVICE_11AC, 105 WMI_SERVICE_BLOCKACK, 106 WMI_SERVICE_PHYERR, 107 WMI_SERVICE_BCN_FILTER, 108 WMI_SERVICE_RTT, 109 WMI_SERVICE_RATECTRL, 110 WMI_SERVICE_WOW, 111 WMI_SERVICE_RATECTRL_CACHE, 112 WMI_SERVICE_IRAM_TIDS, 113 WMI_SERVICE_ARPNS_OFFLOAD, 114 WMI_SERVICE_NLO, 115 WMI_SERVICE_GTK_OFFLOAD, 116 WMI_SERVICE_SCAN_SCH, 117 WMI_SERVICE_CSA_OFFLOAD, 118 WMI_SERVICE_CHATTER, 119 WMI_SERVICE_COEX_FREQAVOID, 120 WMI_SERVICE_PACKET_POWER_SAVE, 121 WMI_SERVICE_FORCE_FW_HANG, 122 WMI_SERVICE_GPIO, 123 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 124 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 125 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 126 WMI_SERVICE_STA_KEEP_ALIVE, 127 WMI_SERVICE_TX_ENCAP, 128 WMI_SERVICE_BURST, 129 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, 130 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, 131 WMI_SERVICE_ROAM_SCAN_OFFLOAD, 132 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 133 WMI_SERVICE_EARLY_RX, 134 WMI_SERVICE_STA_SMPS, 135 WMI_SERVICE_FWTEST, 136 WMI_SERVICE_STA_WMMAC, 137 WMI_SERVICE_TDLS, 138 WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE, 139 WMI_SERVICE_ADAPTIVE_OCS, 140 WMI_SERVICE_BA_SSN_SUPPORT, 141 WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE, 142 WMI_SERVICE_WLAN_HB, 143 WMI_SERVICE_LTE_ANT_SHARE_SUPPORT, 144 WMI_SERVICE_BATCH_SCAN, 145 WMI_SERVICE_QPOWER, 146 WMI_SERVICE_PLMREQ, 147 WMI_SERVICE_THERMAL_MGMT, 148 WMI_SERVICE_RMC, 149 WMI_SERVICE_MHF_OFFLOAD, 150 WMI_SERVICE_COEX_SAR, 151 WMI_SERVICE_BCN_TXRATE_OVERRIDE, 152 WMI_SERVICE_NAN, 153 WMI_SERVICE_L1SS_STAT, 154 WMI_SERVICE_ESTIMATE_LINKSPEED, 155 WMI_SERVICE_OBSS_SCAN, 156 WMI_SERVICE_TDLS_OFFCHAN, 157 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, 158 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, 159 WMI_SERVICE_IBSS_PWRSAVE, 160 WMI_SERVICE_LPASS, 161 WMI_SERVICE_EXTSCAN, 162 WMI_SERVICE_D0WOW, 163 WMI_SERVICE_HSOFFLOAD, 164 WMI_SERVICE_ROAM_HO_OFFLOAD, 165 WMI_SERVICE_RX_FULL_REORDER, 166 WMI_SERVICE_DHCP_OFFLOAD, 167 WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT, 168 WMI_SERVICE_MDNS_OFFLOAD, 169 WMI_SERVICE_SAP_AUTH_OFFLOAD, 170 WMI_SERVICE_ATF, 171 WMI_SERVICE_COEX_GPIO, 172 WMI_SERVICE_ENHANCED_PROXY_STA, 173 WMI_SERVICE_TT, 174 WMI_SERVICE_PEER_CACHING, 175 WMI_SERVICE_AUX_SPECTRAL_INTF, 176 WMI_SERVICE_AUX_CHAN_LOAD_INTF, 177 WMI_SERVICE_BSS_CHANNEL_INFO_64, 178 WMI_SERVICE_EXT_RES_CFG_SUPPORT, 179 WMI_SERVICE_MESH_11S, 180 WMI_SERVICE_MESH_NON_11S, 181 WMI_SERVICE_PEER_STATS, 182 WMI_SERVICE_RESTRT_CHNL_SUPPORT, 183 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 184 WMI_SERVICE_TX_MODE_PUSH_ONLY, 185 WMI_SERVICE_TX_MODE_PUSH_PULL, 186 WMI_SERVICE_TX_MODE_DYNAMIC, 187 188 /* keep last */ 189 WMI_SERVICE_MAX, 190 }; 191 192 enum wmi_10x_service { 193 WMI_10X_SERVICE_BEACON_OFFLOAD = 0, 194 WMI_10X_SERVICE_SCAN_OFFLOAD, 195 WMI_10X_SERVICE_ROAM_OFFLOAD, 196 WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 197 WMI_10X_SERVICE_STA_PWRSAVE, 198 WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 199 WMI_10X_SERVICE_AP_UAPSD, 200 WMI_10X_SERVICE_AP_DFS, 201 WMI_10X_SERVICE_11AC, 202 WMI_10X_SERVICE_BLOCKACK, 203 WMI_10X_SERVICE_PHYERR, 204 WMI_10X_SERVICE_BCN_FILTER, 205 WMI_10X_SERVICE_RTT, 206 WMI_10X_SERVICE_RATECTRL, 207 WMI_10X_SERVICE_WOW, 208 WMI_10X_SERVICE_RATECTRL_CACHE, 209 WMI_10X_SERVICE_IRAM_TIDS, 210 WMI_10X_SERVICE_BURST, 211 212 /* introduced in 10.2 */ 213 WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 214 WMI_10X_SERVICE_FORCE_FW_HANG, 215 WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 216 WMI_10X_SERVICE_ATF, 217 WMI_10X_SERVICE_COEX_GPIO, 218 WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 219 WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 220 WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 221 WMI_10X_SERVICE_MESH, 222 WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 223 WMI_10X_SERVICE_PEER_STATS, 224 }; 225 226 enum wmi_main_service { 227 WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0, 228 WMI_MAIN_SERVICE_SCAN_OFFLOAD, 229 WMI_MAIN_SERVICE_ROAM_OFFLOAD, 230 WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 231 WMI_MAIN_SERVICE_STA_PWRSAVE, 232 WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 233 WMI_MAIN_SERVICE_AP_UAPSD, 234 WMI_MAIN_SERVICE_AP_DFS, 235 WMI_MAIN_SERVICE_11AC, 236 WMI_MAIN_SERVICE_BLOCKACK, 237 WMI_MAIN_SERVICE_PHYERR, 238 WMI_MAIN_SERVICE_BCN_FILTER, 239 WMI_MAIN_SERVICE_RTT, 240 WMI_MAIN_SERVICE_RATECTRL, 241 WMI_MAIN_SERVICE_WOW, 242 WMI_MAIN_SERVICE_RATECTRL_CACHE, 243 WMI_MAIN_SERVICE_IRAM_TIDS, 244 WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 245 WMI_MAIN_SERVICE_NLO, 246 WMI_MAIN_SERVICE_GTK_OFFLOAD, 247 WMI_MAIN_SERVICE_SCAN_SCH, 248 WMI_MAIN_SERVICE_CSA_OFFLOAD, 249 WMI_MAIN_SERVICE_CHATTER, 250 WMI_MAIN_SERVICE_COEX_FREQAVOID, 251 WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 252 WMI_MAIN_SERVICE_FORCE_FW_HANG, 253 WMI_MAIN_SERVICE_GPIO, 254 WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 255 WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 256 WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 257 WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 258 WMI_MAIN_SERVICE_TX_ENCAP, 259 }; 260 261 enum wmi_10_4_service { 262 WMI_10_4_SERVICE_BEACON_OFFLOAD = 0, 263 WMI_10_4_SERVICE_SCAN_OFFLOAD, 264 WMI_10_4_SERVICE_ROAM_OFFLOAD, 265 WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 266 WMI_10_4_SERVICE_STA_PWRSAVE, 267 WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 268 WMI_10_4_SERVICE_AP_UAPSD, 269 WMI_10_4_SERVICE_AP_DFS, 270 WMI_10_4_SERVICE_11AC, 271 WMI_10_4_SERVICE_BLOCKACK, 272 WMI_10_4_SERVICE_PHYERR, 273 WMI_10_4_SERVICE_BCN_FILTER, 274 WMI_10_4_SERVICE_RTT, 275 WMI_10_4_SERVICE_RATECTRL, 276 WMI_10_4_SERVICE_WOW, 277 WMI_10_4_SERVICE_RATECTRL_CACHE, 278 WMI_10_4_SERVICE_IRAM_TIDS, 279 WMI_10_4_SERVICE_BURST, 280 WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 281 WMI_10_4_SERVICE_GTK_OFFLOAD, 282 WMI_10_4_SERVICE_SCAN_SCH, 283 WMI_10_4_SERVICE_CSA_OFFLOAD, 284 WMI_10_4_SERVICE_CHATTER, 285 WMI_10_4_SERVICE_COEX_FREQAVOID, 286 WMI_10_4_SERVICE_PACKET_POWER_SAVE, 287 WMI_10_4_SERVICE_FORCE_FW_HANG, 288 WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 289 WMI_10_4_SERVICE_GPIO, 290 WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 291 WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 292 WMI_10_4_SERVICE_STA_KEEP_ALIVE, 293 WMI_10_4_SERVICE_TX_ENCAP, 294 WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 295 WMI_10_4_SERVICE_EARLY_RX, 296 WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 297 WMI_10_4_SERVICE_TT, 298 WMI_10_4_SERVICE_ATF, 299 WMI_10_4_SERVICE_PEER_CACHING, 300 WMI_10_4_SERVICE_COEX_GPIO, 301 WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 302 WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 303 WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 304 WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 305 WMI_10_4_SERVICE_MESH_NON_11S, 306 WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 307 WMI_10_4_SERVICE_PEER_STATS, 308 WMI_10_4_SERVICE_MESH_11S, 309 WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 310 WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 311 WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 312 WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 313 }; 314 315 static inline char *wmi_service_name(int service_id) 316 { 317 #define SVCSTR(x) case x: return #x 318 319 switch (service_id) { 320 SVCSTR(WMI_SERVICE_BEACON_OFFLOAD); 321 SVCSTR(WMI_SERVICE_SCAN_OFFLOAD); 322 SVCSTR(WMI_SERVICE_ROAM_OFFLOAD); 323 SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD); 324 SVCSTR(WMI_SERVICE_STA_PWRSAVE); 325 SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE); 326 SVCSTR(WMI_SERVICE_AP_UAPSD); 327 SVCSTR(WMI_SERVICE_AP_DFS); 328 SVCSTR(WMI_SERVICE_11AC); 329 SVCSTR(WMI_SERVICE_BLOCKACK); 330 SVCSTR(WMI_SERVICE_PHYERR); 331 SVCSTR(WMI_SERVICE_BCN_FILTER); 332 SVCSTR(WMI_SERVICE_RTT); 333 SVCSTR(WMI_SERVICE_RATECTRL); 334 SVCSTR(WMI_SERVICE_WOW); 335 SVCSTR(WMI_SERVICE_RATECTRL_CACHE); 336 SVCSTR(WMI_SERVICE_IRAM_TIDS); 337 SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD); 338 SVCSTR(WMI_SERVICE_NLO); 339 SVCSTR(WMI_SERVICE_GTK_OFFLOAD); 340 SVCSTR(WMI_SERVICE_SCAN_SCH); 341 SVCSTR(WMI_SERVICE_CSA_OFFLOAD); 342 SVCSTR(WMI_SERVICE_CHATTER); 343 SVCSTR(WMI_SERVICE_COEX_FREQAVOID); 344 SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE); 345 SVCSTR(WMI_SERVICE_FORCE_FW_HANG); 346 SVCSTR(WMI_SERVICE_GPIO); 347 SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM); 348 SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG); 349 SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG); 350 SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE); 351 SVCSTR(WMI_SERVICE_TX_ENCAP); 352 SVCSTR(WMI_SERVICE_BURST); 353 SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT); 354 SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT); 355 SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD); 356 SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC); 357 SVCSTR(WMI_SERVICE_EARLY_RX); 358 SVCSTR(WMI_SERVICE_STA_SMPS); 359 SVCSTR(WMI_SERVICE_FWTEST); 360 SVCSTR(WMI_SERVICE_STA_WMMAC); 361 SVCSTR(WMI_SERVICE_TDLS); 362 SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE); 363 SVCSTR(WMI_SERVICE_ADAPTIVE_OCS); 364 SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT); 365 SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE); 366 SVCSTR(WMI_SERVICE_WLAN_HB); 367 SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT); 368 SVCSTR(WMI_SERVICE_BATCH_SCAN); 369 SVCSTR(WMI_SERVICE_QPOWER); 370 SVCSTR(WMI_SERVICE_PLMREQ); 371 SVCSTR(WMI_SERVICE_THERMAL_MGMT); 372 SVCSTR(WMI_SERVICE_RMC); 373 SVCSTR(WMI_SERVICE_MHF_OFFLOAD); 374 SVCSTR(WMI_SERVICE_COEX_SAR); 375 SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE); 376 SVCSTR(WMI_SERVICE_NAN); 377 SVCSTR(WMI_SERVICE_L1SS_STAT); 378 SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED); 379 SVCSTR(WMI_SERVICE_OBSS_SCAN); 380 SVCSTR(WMI_SERVICE_TDLS_OFFCHAN); 381 SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA); 382 SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA); 383 SVCSTR(WMI_SERVICE_IBSS_PWRSAVE); 384 SVCSTR(WMI_SERVICE_LPASS); 385 SVCSTR(WMI_SERVICE_EXTSCAN); 386 SVCSTR(WMI_SERVICE_D0WOW); 387 SVCSTR(WMI_SERVICE_HSOFFLOAD); 388 SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD); 389 SVCSTR(WMI_SERVICE_RX_FULL_REORDER); 390 SVCSTR(WMI_SERVICE_DHCP_OFFLOAD); 391 SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT); 392 SVCSTR(WMI_SERVICE_MDNS_OFFLOAD); 393 SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD); 394 SVCSTR(WMI_SERVICE_ATF); 395 SVCSTR(WMI_SERVICE_COEX_GPIO); 396 SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA); 397 SVCSTR(WMI_SERVICE_TT); 398 SVCSTR(WMI_SERVICE_PEER_CACHING); 399 SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF); 400 SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF); 401 SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64); 402 SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT); 403 SVCSTR(WMI_SERVICE_MESH_11S); 404 SVCSTR(WMI_SERVICE_MESH_NON_11S); 405 SVCSTR(WMI_SERVICE_PEER_STATS); 406 SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT); 407 SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT); 408 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY); 409 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL); 410 SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC); 411 default: 412 return NULL; 413 } 414 415 #undef SVCSTR 416 } 417 418 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 419 ((svc_id) < (len) && \ 420 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \ 421 BIT((svc_id) % (sizeof(u32)))) 422 423 #define SVCMAP(x, y, len) \ 424 do { \ 425 if (WMI_SERVICE_IS_ENABLED((in), (x), (len))) \ 426 __set_bit(y, out); \ 427 } while (0) 428 429 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out, 430 size_t len) 431 { 432 SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD, 433 WMI_SERVICE_BEACON_OFFLOAD, len); 434 SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD, 435 WMI_SERVICE_SCAN_OFFLOAD, len); 436 SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD, 437 WMI_SERVICE_ROAM_OFFLOAD, len); 438 SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 439 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 440 SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE, 441 WMI_SERVICE_STA_PWRSAVE, len); 442 SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 443 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 444 SVCMAP(WMI_10X_SERVICE_AP_UAPSD, 445 WMI_SERVICE_AP_UAPSD, len); 446 SVCMAP(WMI_10X_SERVICE_AP_DFS, 447 WMI_SERVICE_AP_DFS, len); 448 SVCMAP(WMI_10X_SERVICE_11AC, 449 WMI_SERVICE_11AC, len); 450 SVCMAP(WMI_10X_SERVICE_BLOCKACK, 451 WMI_SERVICE_BLOCKACK, len); 452 SVCMAP(WMI_10X_SERVICE_PHYERR, 453 WMI_SERVICE_PHYERR, len); 454 SVCMAP(WMI_10X_SERVICE_BCN_FILTER, 455 WMI_SERVICE_BCN_FILTER, len); 456 SVCMAP(WMI_10X_SERVICE_RTT, 457 WMI_SERVICE_RTT, len); 458 SVCMAP(WMI_10X_SERVICE_RATECTRL, 459 WMI_SERVICE_RATECTRL, len); 460 SVCMAP(WMI_10X_SERVICE_WOW, 461 WMI_SERVICE_WOW, len); 462 SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE, 463 WMI_SERVICE_RATECTRL_CACHE, len); 464 SVCMAP(WMI_10X_SERVICE_IRAM_TIDS, 465 WMI_SERVICE_IRAM_TIDS, len); 466 SVCMAP(WMI_10X_SERVICE_BURST, 467 WMI_SERVICE_BURST, len); 468 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 469 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 470 SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG, 471 WMI_SERVICE_FORCE_FW_HANG, len); 472 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 473 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 474 SVCMAP(WMI_10X_SERVICE_ATF, 475 WMI_SERVICE_ATF, len); 476 SVCMAP(WMI_10X_SERVICE_COEX_GPIO, 477 WMI_SERVICE_COEX_GPIO, len); 478 SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 479 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 480 SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 481 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 482 SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 483 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 484 SVCMAP(WMI_10X_SERVICE_MESH, 485 WMI_SERVICE_MESH_11S, len); 486 SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 487 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 488 SVCMAP(WMI_10X_SERVICE_PEER_STATS, 489 WMI_SERVICE_PEER_STATS, len); 490 } 491 492 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out, 493 size_t len) 494 { 495 SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD, 496 WMI_SERVICE_BEACON_OFFLOAD, len); 497 SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD, 498 WMI_SERVICE_SCAN_OFFLOAD, len); 499 SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD, 500 WMI_SERVICE_ROAM_OFFLOAD, len); 501 SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 502 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 503 SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE, 504 WMI_SERVICE_STA_PWRSAVE, len); 505 SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 506 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 507 SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD, 508 WMI_SERVICE_AP_UAPSD, len); 509 SVCMAP(WMI_MAIN_SERVICE_AP_DFS, 510 WMI_SERVICE_AP_DFS, len); 511 SVCMAP(WMI_MAIN_SERVICE_11AC, 512 WMI_SERVICE_11AC, len); 513 SVCMAP(WMI_MAIN_SERVICE_BLOCKACK, 514 WMI_SERVICE_BLOCKACK, len); 515 SVCMAP(WMI_MAIN_SERVICE_PHYERR, 516 WMI_SERVICE_PHYERR, len); 517 SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER, 518 WMI_SERVICE_BCN_FILTER, len); 519 SVCMAP(WMI_MAIN_SERVICE_RTT, 520 WMI_SERVICE_RTT, len); 521 SVCMAP(WMI_MAIN_SERVICE_RATECTRL, 522 WMI_SERVICE_RATECTRL, len); 523 SVCMAP(WMI_MAIN_SERVICE_WOW, 524 WMI_SERVICE_WOW, len); 525 SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE, 526 WMI_SERVICE_RATECTRL_CACHE, len); 527 SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS, 528 WMI_SERVICE_IRAM_TIDS, len); 529 SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 530 WMI_SERVICE_ARPNS_OFFLOAD, len); 531 SVCMAP(WMI_MAIN_SERVICE_NLO, 532 WMI_SERVICE_NLO, len); 533 SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD, 534 WMI_SERVICE_GTK_OFFLOAD, len); 535 SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH, 536 WMI_SERVICE_SCAN_SCH, len); 537 SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD, 538 WMI_SERVICE_CSA_OFFLOAD, len); 539 SVCMAP(WMI_MAIN_SERVICE_CHATTER, 540 WMI_SERVICE_CHATTER, len); 541 SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID, 542 WMI_SERVICE_COEX_FREQAVOID, len); 543 SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 544 WMI_SERVICE_PACKET_POWER_SAVE, len); 545 SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG, 546 WMI_SERVICE_FORCE_FW_HANG, len); 547 SVCMAP(WMI_MAIN_SERVICE_GPIO, 548 WMI_SERVICE_GPIO, len); 549 SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 550 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len); 551 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 552 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 553 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 554 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 555 SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 556 WMI_SERVICE_STA_KEEP_ALIVE, len); 557 SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP, 558 WMI_SERVICE_TX_ENCAP, len); 559 } 560 561 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out, 562 size_t len) 563 { 564 SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD, 565 WMI_SERVICE_BEACON_OFFLOAD, len); 566 SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD, 567 WMI_SERVICE_SCAN_OFFLOAD, len); 568 SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD, 569 WMI_SERVICE_ROAM_OFFLOAD, len); 570 SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 571 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 572 SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE, 573 WMI_SERVICE_STA_PWRSAVE, len); 574 SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 575 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 576 SVCMAP(WMI_10_4_SERVICE_AP_UAPSD, 577 WMI_SERVICE_AP_UAPSD, len); 578 SVCMAP(WMI_10_4_SERVICE_AP_DFS, 579 WMI_SERVICE_AP_DFS, len); 580 SVCMAP(WMI_10_4_SERVICE_11AC, 581 WMI_SERVICE_11AC, len); 582 SVCMAP(WMI_10_4_SERVICE_BLOCKACK, 583 WMI_SERVICE_BLOCKACK, len); 584 SVCMAP(WMI_10_4_SERVICE_PHYERR, 585 WMI_SERVICE_PHYERR, len); 586 SVCMAP(WMI_10_4_SERVICE_BCN_FILTER, 587 WMI_SERVICE_BCN_FILTER, len); 588 SVCMAP(WMI_10_4_SERVICE_RTT, 589 WMI_SERVICE_RTT, len); 590 SVCMAP(WMI_10_4_SERVICE_RATECTRL, 591 WMI_SERVICE_RATECTRL, len); 592 SVCMAP(WMI_10_4_SERVICE_WOW, 593 WMI_SERVICE_WOW, len); 594 SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE, 595 WMI_SERVICE_RATECTRL_CACHE, len); 596 SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS, 597 WMI_SERVICE_IRAM_TIDS, len); 598 SVCMAP(WMI_10_4_SERVICE_BURST, 599 WMI_SERVICE_BURST, len); 600 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 601 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 602 SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD, 603 WMI_SERVICE_GTK_OFFLOAD, len); 604 SVCMAP(WMI_10_4_SERVICE_SCAN_SCH, 605 WMI_SERVICE_SCAN_SCH, len); 606 SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD, 607 WMI_SERVICE_CSA_OFFLOAD, len); 608 SVCMAP(WMI_10_4_SERVICE_CHATTER, 609 WMI_SERVICE_CHATTER, len); 610 SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID, 611 WMI_SERVICE_COEX_FREQAVOID, len); 612 SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE, 613 WMI_SERVICE_PACKET_POWER_SAVE, len); 614 SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG, 615 WMI_SERVICE_FORCE_FW_HANG, len); 616 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 617 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 618 SVCMAP(WMI_10_4_SERVICE_GPIO, 619 WMI_SERVICE_GPIO, len); 620 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 621 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 622 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 623 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 624 SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE, 625 WMI_SERVICE_STA_KEEP_ALIVE, len); 626 SVCMAP(WMI_10_4_SERVICE_TX_ENCAP, 627 WMI_SERVICE_TX_ENCAP, len); 628 SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 629 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len); 630 SVCMAP(WMI_10_4_SERVICE_EARLY_RX, 631 WMI_SERVICE_EARLY_RX, len); 632 SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 633 WMI_SERVICE_ENHANCED_PROXY_STA, len); 634 SVCMAP(WMI_10_4_SERVICE_TT, 635 WMI_SERVICE_TT, len); 636 SVCMAP(WMI_10_4_SERVICE_ATF, 637 WMI_SERVICE_ATF, len); 638 SVCMAP(WMI_10_4_SERVICE_PEER_CACHING, 639 WMI_SERVICE_PEER_CACHING, len); 640 SVCMAP(WMI_10_4_SERVICE_COEX_GPIO, 641 WMI_SERVICE_COEX_GPIO, len); 642 SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 643 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 644 SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 645 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 646 SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 647 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 648 SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 649 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 650 SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S, 651 WMI_SERVICE_MESH_NON_11S, len); 652 SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 653 WMI_SERVICE_RESTRT_CHNL_SUPPORT, len); 654 SVCMAP(WMI_10_4_SERVICE_PEER_STATS, 655 WMI_SERVICE_PEER_STATS, len); 656 SVCMAP(WMI_10_4_SERVICE_MESH_11S, 657 WMI_SERVICE_MESH_11S, len); 658 SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 659 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len); 660 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 661 WMI_SERVICE_TX_MODE_PUSH_ONLY, len); 662 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 663 WMI_SERVICE_TX_MODE_PUSH_PULL, len); 664 SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 665 WMI_SERVICE_TX_MODE_DYNAMIC, len); 666 } 667 668 #undef SVCMAP 669 670 /* 2 word representation of MAC addr */ 671 struct wmi_mac_addr { 672 union { 673 u8 addr[6]; 674 struct { 675 u32 word0; 676 u32 word1; 677 } __packed; 678 } __packed; 679 } __packed; 680 681 struct wmi_cmd_map { 682 u32 init_cmdid; 683 u32 start_scan_cmdid; 684 u32 stop_scan_cmdid; 685 u32 scan_chan_list_cmdid; 686 u32 scan_sch_prio_tbl_cmdid; 687 u32 pdev_set_regdomain_cmdid; 688 u32 pdev_set_channel_cmdid; 689 u32 pdev_set_param_cmdid; 690 u32 pdev_pktlog_enable_cmdid; 691 u32 pdev_pktlog_disable_cmdid; 692 u32 pdev_set_wmm_params_cmdid; 693 u32 pdev_set_ht_cap_ie_cmdid; 694 u32 pdev_set_vht_cap_ie_cmdid; 695 u32 pdev_set_dscp_tid_map_cmdid; 696 u32 pdev_set_quiet_mode_cmdid; 697 u32 pdev_green_ap_ps_enable_cmdid; 698 u32 pdev_get_tpc_config_cmdid; 699 u32 pdev_set_base_macaddr_cmdid; 700 u32 vdev_create_cmdid; 701 u32 vdev_delete_cmdid; 702 u32 vdev_start_request_cmdid; 703 u32 vdev_restart_request_cmdid; 704 u32 vdev_up_cmdid; 705 u32 vdev_stop_cmdid; 706 u32 vdev_down_cmdid; 707 u32 vdev_set_param_cmdid; 708 u32 vdev_install_key_cmdid; 709 u32 peer_create_cmdid; 710 u32 peer_delete_cmdid; 711 u32 peer_flush_tids_cmdid; 712 u32 peer_set_param_cmdid; 713 u32 peer_assoc_cmdid; 714 u32 peer_add_wds_entry_cmdid; 715 u32 peer_remove_wds_entry_cmdid; 716 u32 peer_mcast_group_cmdid; 717 u32 bcn_tx_cmdid; 718 u32 pdev_send_bcn_cmdid; 719 u32 bcn_tmpl_cmdid; 720 u32 bcn_filter_rx_cmdid; 721 u32 prb_req_filter_rx_cmdid; 722 u32 mgmt_tx_cmdid; 723 u32 prb_tmpl_cmdid; 724 u32 addba_clear_resp_cmdid; 725 u32 addba_send_cmdid; 726 u32 addba_status_cmdid; 727 u32 delba_send_cmdid; 728 u32 addba_set_resp_cmdid; 729 u32 send_singleamsdu_cmdid; 730 u32 sta_powersave_mode_cmdid; 731 u32 sta_powersave_param_cmdid; 732 u32 sta_mimo_ps_mode_cmdid; 733 u32 pdev_dfs_enable_cmdid; 734 u32 pdev_dfs_disable_cmdid; 735 u32 roam_scan_mode; 736 u32 roam_scan_rssi_threshold; 737 u32 roam_scan_period; 738 u32 roam_scan_rssi_change_threshold; 739 u32 roam_ap_profile; 740 u32 ofl_scan_add_ap_profile; 741 u32 ofl_scan_remove_ap_profile; 742 u32 ofl_scan_period; 743 u32 p2p_dev_set_device_info; 744 u32 p2p_dev_set_discoverability; 745 u32 p2p_go_set_beacon_ie; 746 u32 p2p_go_set_probe_resp_ie; 747 u32 p2p_set_vendor_ie_data_cmdid; 748 u32 ap_ps_peer_param_cmdid; 749 u32 ap_ps_peer_uapsd_coex_cmdid; 750 u32 peer_rate_retry_sched_cmdid; 751 u32 wlan_profile_trigger_cmdid; 752 u32 wlan_profile_set_hist_intvl_cmdid; 753 u32 wlan_profile_get_profile_data_cmdid; 754 u32 wlan_profile_enable_profile_id_cmdid; 755 u32 wlan_profile_list_profile_id_cmdid; 756 u32 pdev_suspend_cmdid; 757 u32 pdev_resume_cmdid; 758 u32 add_bcn_filter_cmdid; 759 u32 rmv_bcn_filter_cmdid; 760 u32 wow_add_wake_pattern_cmdid; 761 u32 wow_del_wake_pattern_cmdid; 762 u32 wow_enable_disable_wake_event_cmdid; 763 u32 wow_enable_cmdid; 764 u32 wow_hostwakeup_from_sleep_cmdid; 765 u32 rtt_measreq_cmdid; 766 u32 rtt_tsf_cmdid; 767 u32 vdev_spectral_scan_configure_cmdid; 768 u32 vdev_spectral_scan_enable_cmdid; 769 u32 request_stats_cmdid; 770 u32 set_arp_ns_offload_cmdid; 771 u32 network_list_offload_config_cmdid; 772 u32 gtk_offload_cmdid; 773 u32 csa_offload_enable_cmdid; 774 u32 csa_offload_chanswitch_cmdid; 775 u32 chatter_set_mode_cmdid; 776 u32 peer_tid_addba_cmdid; 777 u32 peer_tid_delba_cmdid; 778 u32 sta_dtim_ps_method_cmdid; 779 u32 sta_uapsd_auto_trig_cmdid; 780 u32 sta_keepalive_cmd; 781 u32 echo_cmdid; 782 u32 pdev_utf_cmdid; 783 u32 dbglog_cfg_cmdid; 784 u32 pdev_qvit_cmdid; 785 u32 pdev_ftm_intg_cmdid; 786 u32 vdev_set_keepalive_cmdid; 787 u32 vdev_get_keepalive_cmdid; 788 u32 force_fw_hang_cmdid; 789 u32 gpio_config_cmdid; 790 u32 gpio_output_cmdid; 791 u32 pdev_get_temperature_cmdid; 792 u32 vdev_set_wmm_params_cmdid; 793 u32 tdls_set_state_cmdid; 794 u32 tdls_peer_update_cmdid; 795 u32 adaptive_qcs_cmdid; 796 u32 scan_update_request_cmdid; 797 u32 vdev_standby_response_cmdid; 798 u32 vdev_resume_response_cmdid; 799 u32 wlan_peer_caching_add_peer_cmdid; 800 u32 wlan_peer_caching_evict_peer_cmdid; 801 u32 wlan_peer_caching_restore_peer_cmdid; 802 u32 wlan_peer_caching_print_all_peers_info_cmdid; 803 u32 peer_update_wds_entry_cmdid; 804 u32 peer_add_proxy_sta_entry_cmdid; 805 u32 rtt_keepalive_cmdid; 806 u32 oem_req_cmdid; 807 u32 nan_cmdid; 808 u32 vdev_ratemask_cmdid; 809 u32 qboost_cfg_cmdid; 810 u32 pdev_smart_ant_enable_cmdid; 811 u32 pdev_smart_ant_set_rx_antenna_cmdid; 812 u32 peer_smart_ant_set_tx_antenna_cmdid; 813 u32 peer_smart_ant_set_train_info_cmdid; 814 u32 peer_smart_ant_set_node_config_ops_cmdid; 815 u32 pdev_set_antenna_switch_table_cmdid; 816 u32 pdev_set_ctl_table_cmdid; 817 u32 pdev_set_mimogain_table_cmdid; 818 u32 pdev_ratepwr_table_cmdid; 819 u32 pdev_ratepwr_chainmsk_table_cmdid; 820 u32 pdev_fips_cmdid; 821 u32 tt_set_conf_cmdid; 822 u32 fwtest_cmdid; 823 u32 vdev_atf_request_cmdid; 824 u32 peer_atf_request_cmdid; 825 u32 pdev_get_ani_cck_config_cmdid; 826 u32 pdev_get_ani_ofdm_config_cmdid; 827 u32 pdev_reserve_ast_entry_cmdid; 828 u32 pdev_get_nfcal_power_cmdid; 829 u32 pdev_get_tpc_cmdid; 830 u32 pdev_get_ast_info_cmdid; 831 u32 vdev_set_dscp_tid_map_cmdid; 832 u32 pdev_get_info_cmdid; 833 u32 vdev_get_info_cmdid; 834 u32 vdev_filter_neighbor_rx_packets_cmdid; 835 u32 mu_cal_start_cmdid; 836 u32 set_cca_params_cmdid; 837 u32 pdev_bss_chan_info_request_cmdid; 838 u32 pdev_enable_adaptive_cca_cmdid; 839 u32 ext_resource_cfg_cmdid; 840 }; 841 842 /* 843 * wmi command groups. 844 */ 845 enum wmi_cmd_group { 846 /* 0 to 2 are reserved */ 847 WMI_GRP_START = 0x3, 848 WMI_GRP_SCAN = WMI_GRP_START, 849 WMI_GRP_PDEV, 850 WMI_GRP_VDEV, 851 WMI_GRP_PEER, 852 WMI_GRP_MGMT, 853 WMI_GRP_BA_NEG, 854 WMI_GRP_STA_PS, 855 WMI_GRP_DFS, 856 WMI_GRP_ROAM, 857 WMI_GRP_OFL_SCAN, 858 WMI_GRP_P2P, 859 WMI_GRP_AP_PS, 860 WMI_GRP_RATE_CTRL, 861 WMI_GRP_PROFILE, 862 WMI_GRP_SUSPEND, 863 WMI_GRP_BCN_FILTER, 864 WMI_GRP_WOW, 865 WMI_GRP_RTT, 866 WMI_GRP_SPECTRAL, 867 WMI_GRP_STATS, 868 WMI_GRP_ARP_NS_OFL, 869 WMI_GRP_NLO_OFL, 870 WMI_GRP_GTK_OFL, 871 WMI_GRP_CSA_OFL, 872 WMI_GRP_CHATTER, 873 WMI_GRP_TID_ADDBA, 874 WMI_GRP_MISC, 875 WMI_GRP_GPIO, 876 }; 877 878 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1) 879 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1) 880 881 #define WMI_CMD_UNSUPPORTED 0 882 883 /* Command IDs and command events for MAIN FW. */ 884 enum wmi_cmd_id { 885 WMI_INIT_CMDID = 0x1, 886 887 /* Scan specific commands */ 888 WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN), 889 WMI_STOP_SCAN_CMDID, 890 WMI_SCAN_CHAN_LIST_CMDID, 891 WMI_SCAN_SCH_PRIO_TBL_CMDID, 892 893 /* PDEV (physical device) specific commands */ 894 WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV), 895 WMI_PDEV_SET_CHANNEL_CMDID, 896 WMI_PDEV_SET_PARAM_CMDID, 897 WMI_PDEV_PKTLOG_ENABLE_CMDID, 898 WMI_PDEV_PKTLOG_DISABLE_CMDID, 899 WMI_PDEV_SET_WMM_PARAMS_CMDID, 900 WMI_PDEV_SET_HT_CAP_IE_CMDID, 901 WMI_PDEV_SET_VHT_CAP_IE_CMDID, 902 WMI_PDEV_SET_DSCP_TID_MAP_CMDID, 903 WMI_PDEV_SET_QUIET_MODE_CMDID, 904 WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID, 905 WMI_PDEV_GET_TPC_CONFIG_CMDID, 906 WMI_PDEV_SET_BASE_MACADDR_CMDID, 907 908 /* VDEV (virtual device) specific commands */ 909 WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV), 910 WMI_VDEV_DELETE_CMDID, 911 WMI_VDEV_START_REQUEST_CMDID, 912 WMI_VDEV_RESTART_REQUEST_CMDID, 913 WMI_VDEV_UP_CMDID, 914 WMI_VDEV_STOP_CMDID, 915 WMI_VDEV_DOWN_CMDID, 916 WMI_VDEV_SET_PARAM_CMDID, 917 WMI_VDEV_INSTALL_KEY_CMDID, 918 919 /* peer specific commands */ 920 WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER), 921 WMI_PEER_DELETE_CMDID, 922 WMI_PEER_FLUSH_TIDS_CMDID, 923 WMI_PEER_SET_PARAM_CMDID, 924 WMI_PEER_ASSOC_CMDID, 925 WMI_PEER_ADD_WDS_ENTRY_CMDID, 926 WMI_PEER_REMOVE_WDS_ENTRY_CMDID, 927 WMI_PEER_MCAST_GROUP_CMDID, 928 929 /* beacon/management specific commands */ 930 WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT), 931 WMI_PDEV_SEND_BCN_CMDID, 932 WMI_BCN_TMPL_CMDID, 933 WMI_BCN_FILTER_RX_CMDID, 934 WMI_PRB_REQ_FILTER_RX_CMDID, 935 WMI_MGMT_TX_CMDID, 936 WMI_PRB_TMPL_CMDID, 937 938 /* commands to directly control BA negotiation directly from host. */ 939 WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG), 940 WMI_ADDBA_SEND_CMDID, 941 WMI_ADDBA_STATUS_CMDID, 942 WMI_DELBA_SEND_CMDID, 943 WMI_ADDBA_SET_RESP_CMDID, 944 WMI_SEND_SINGLEAMSDU_CMDID, 945 946 /* Station power save specific config */ 947 WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS), 948 WMI_STA_POWERSAVE_PARAM_CMDID, 949 WMI_STA_MIMO_PS_MODE_CMDID, 950 951 /** DFS-specific commands */ 952 WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS), 953 WMI_PDEV_DFS_DISABLE_CMDID, 954 955 /* Roaming specific commands */ 956 WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM), 957 WMI_ROAM_SCAN_RSSI_THRESHOLD, 958 WMI_ROAM_SCAN_PERIOD, 959 WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 960 WMI_ROAM_AP_PROFILE, 961 962 /* offload scan specific commands */ 963 WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN), 964 WMI_OFL_SCAN_REMOVE_AP_PROFILE, 965 WMI_OFL_SCAN_PERIOD, 966 967 /* P2P specific commands */ 968 WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P), 969 WMI_P2P_DEV_SET_DISCOVERABILITY, 970 WMI_P2P_GO_SET_BEACON_IE, 971 WMI_P2P_GO_SET_PROBE_RESP_IE, 972 WMI_P2P_SET_VENDOR_IE_DATA_CMDID, 973 974 /* AP power save specific config */ 975 WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS), 976 WMI_AP_PS_PEER_UAPSD_COEX_CMDID, 977 978 /* Rate-control specific commands */ 979 WMI_PEER_RATE_RETRY_SCHED_CMDID = 980 WMI_CMD_GRP(WMI_GRP_RATE_CTRL), 981 982 /* WLAN Profiling commands. */ 983 WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE), 984 WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 985 WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 986 WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 987 WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 988 989 /* Suspend resume command Ids */ 990 WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND), 991 WMI_PDEV_RESUME_CMDID, 992 993 /* Beacon filter commands */ 994 WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER), 995 WMI_RMV_BCN_FILTER_CMDID, 996 997 /* WOW Specific WMI commands*/ 998 WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW), 999 WMI_WOW_DEL_WAKE_PATTERN_CMDID, 1000 WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1001 WMI_WOW_ENABLE_CMDID, 1002 WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1003 1004 /* RTT measurement related cmd */ 1005 WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT), 1006 WMI_RTT_TSF_CMDID, 1007 1008 /* spectral scan commands */ 1009 WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL), 1010 WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1011 1012 /* F/W stats */ 1013 WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS), 1014 1015 /* ARP OFFLOAD REQUEST*/ 1016 WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL), 1017 1018 /* NS offload confid*/ 1019 WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL), 1020 1021 /* GTK offload Specific WMI commands*/ 1022 WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL), 1023 1024 /* CSA offload Specific WMI commands*/ 1025 WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL), 1026 WMI_CSA_OFFLOAD_CHANSWITCH_CMDID, 1027 1028 /* Chatter commands*/ 1029 WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER), 1030 1031 /* addba specific commands */ 1032 WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA), 1033 WMI_PEER_TID_DELBA_CMDID, 1034 1035 /* set station mimo powersave method */ 1036 WMI_STA_DTIM_PS_METHOD_CMDID, 1037 /* Configure the Station UAPSD AC Auto Trigger Parameters */ 1038 WMI_STA_UAPSD_AUTO_TRIG_CMDID, 1039 1040 /* STA Keep alive parameter configuration, 1041 Requires WMI_SERVICE_STA_KEEP_ALIVE */ 1042 WMI_STA_KEEPALIVE_CMD, 1043 1044 /* misc command group */ 1045 WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC), 1046 WMI_PDEV_UTF_CMDID, 1047 WMI_DBGLOG_CFG_CMDID, 1048 WMI_PDEV_QVIT_CMDID, 1049 WMI_PDEV_FTM_INTG_CMDID, 1050 WMI_VDEV_SET_KEEPALIVE_CMDID, 1051 WMI_VDEV_GET_KEEPALIVE_CMDID, 1052 WMI_FORCE_FW_HANG_CMDID, 1053 1054 /* GPIO Configuration */ 1055 WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO), 1056 WMI_GPIO_OUTPUT_CMDID, 1057 }; 1058 1059 enum wmi_event_id { 1060 WMI_SERVICE_READY_EVENTID = 0x1, 1061 WMI_READY_EVENTID, 1062 1063 /* Scan specific events */ 1064 WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN), 1065 1066 /* PDEV specific events */ 1067 WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV), 1068 WMI_CHAN_INFO_EVENTID, 1069 WMI_PHYERR_EVENTID, 1070 1071 /* VDEV specific events */ 1072 WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV), 1073 WMI_VDEV_STOPPED_EVENTID, 1074 WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID, 1075 1076 /* peer specific events */ 1077 WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER), 1078 1079 /* beacon/mgmt specific events */ 1080 WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT), 1081 WMI_HOST_SWBA_EVENTID, 1082 WMI_TBTTOFFSET_UPDATE_EVENTID, 1083 1084 /* ADDBA Related WMI Events*/ 1085 WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG), 1086 WMI_TX_ADDBA_COMPLETE_EVENTID, 1087 1088 /* Roam event to trigger roaming on host */ 1089 WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM), 1090 WMI_PROFILE_MATCH, 1091 1092 /* WoW */ 1093 WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW), 1094 1095 /* RTT */ 1096 WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT), 1097 WMI_TSF_MEASUREMENT_REPORT_EVENTID, 1098 WMI_RTT_ERROR_REPORT_EVENTID, 1099 1100 /* GTK offload */ 1101 WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL), 1102 WMI_GTK_REKEY_FAIL_EVENTID, 1103 1104 /* CSA IE received event */ 1105 WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL), 1106 1107 /* Misc events */ 1108 WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC), 1109 WMI_PDEV_UTF_EVENTID, 1110 WMI_DEBUG_MESG_EVENTID, 1111 WMI_UPDATE_STATS_EVENTID, 1112 WMI_DEBUG_PRINT_EVENTID, 1113 WMI_DCS_INTERFERENCE_EVENTID, 1114 WMI_PDEV_QVIT_EVENTID, 1115 WMI_WLAN_PROFILE_DATA_EVENTID, 1116 WMI_PDEV_FTM_INTG_EVENTID, 1117 WMI_WLAN_FREQ_AVOID_EVENTID, 1118 WMI_VDEV_GET_KEEPALIVE_EVENTID, 1119 1120 /* GPIO Event */ 1121 WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO), 1122 }; 1123 1124 /* Command IDs and command events for 10.X firmware */ 1125 enum wmi_10x_cmd_id { 1126 WMI_10X_START_CMDID = 0x9000, 1127 WMI_10X_END_CMDID = 0x9FFF, 1128 1129 /* initialize the wlan sub system */ 1130 WMI_10X_INIT_CMDID, 1131 1132 /* Scan specific commands */ 1133 1134 WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID, 1135 WMI_10X_STOP_SCAN_CMDID, 1136 WMI_10X_SCAN_CHAN_LIST_CMDID, 1137 WMI_10X_ECHO_CMDID, 1138 1139 /* PDEV(physical device) specific commands */ 1140 WMI_10X_PDEV_SET_REGDOMAIN_CMDID, 1141 WMI_10X_PDEV_SET_CHANNEL_CMDID, 1142 WMI_10X_PDEV_SET_PARAM_CMDID, 1143 WMI_10X_PDEV_PKTLOG_ENABLE_CMDID, 1144 WMI_10X_PDEV_PKTLOG_DISABLE_CMDID, 1145 WMI_10X_PDEV_SET_WMM_PARAMS_CMDID, 1146 WMI_10X_PDEV_SET_HT_CAP_IE_CMDID, 1147 WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID, 1148 WMI_10X_PDEV_SET_BASE_MACADDR_CMDID, 1149 WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID, 1150 WMI_10X_PDEV_SET_QUIET_MODE_CMDID, 1151 WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1152 WMI_10X_PDEV_GET_TPC_CONFIG_CMDID, 1153 1154 /* VDEV(virtual device) specific commands */ 1155 WMI_10X_VDEV_CREATE_CMDID, 1156 WMI_10X_VDEV_DELETE_CMDID, 1157 WMI_10X_VDEV_START_REQUEST_CMDID, 1158 WMI_10X_VDEV_RESTART_REQUEST_CMDID, 1159 WMI_10X_VDEV_UP_CMDID, 1160 WMI_10X_VDEV_STOP_CMDID, 1161 WMI_10X_VDEV_DOWN_CMDID, 1162 WMI_10X_VDEV_STANDBY_RESPONSE_CMDID, 1163 WMI_10X_VDEV_RESUME_RESPONSE_CMDID, 1164 WMI_10X_VDEV_SET_PARAM_CMDID, 1165 WMI_10X_VDEV_INSTALL_KEY_CMDID, 1166 1167 /* peer specific commands */ 1168 WMI_10X_PEER_CREATE_CMDID, 1169 WMI_10X_PEER_DELETE_CMDID, 1170 WMI_10X_PEER_FLUSH_TIDS_CMDID, 1171 WMI_10X_PEER_SET_PARAM_CMDID, 1172 WMI_10X_PEER_ASSOC_CMDID, 1173 WMI_10X_PEER_ADD_WDS_ENTRY_CMDID, 1174 WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID, 1175 WMI_10X_PEER_MCAST_GROUP_CMDID, 1176 1177 /* beacon/management specific commands */ 1178 1179 WMI_10X_BCN_TX_CMDID, 1180 WMI_10X_BCN_PRB_TMPL_CMDID, 1181 WMI_10X_BCN_FILTER_RX_CMDID, 1182 WMI_10X_PRB_REQ_FILTER_RX_CMDID, 1183 WMI_10X_MGMT_TX_CMDID, 1184 1185 /* commands to directly control ba negotiation directly from host. */ 1186 WMI_10X_ADDBA_CLEAR_RESP_CMDID, 1187 WMI_10X_ADDBA_SEND_CMDID, 1188 WMI_10X_ADDBA_STATUS_CMDID, 1189 WMI_10X_DELBA_SEND_CMDID, 1190 WMI_10X_ADDBA_SET_RESP_CMDID, 1191 WMI_10X_SEND_SINGLEAMSDU_CMDID, 1192 1193 /* Station power save specific config */ 1194 WMI_10X_STA_POWERSAVE_MODE_CMDID, 1195 WMI_10X_STA_POWERSAVE_PARAM_CMDID, 1196 WMI_10X_STA_MIMO_PS_MODE_CMDID, 1197 1198 /* set debug log config */ 1199 WMI_10X_DBGLOG_CFG_CMDID, 1200 1201 /* DFS-specific commands */ 1202 WMI_10X_PDEV_DFS_ENABLE_CMDID, 1203 WMI_10X_PDEV_DFS_DISABLE_CMDID, 1204 1205 /* QVIT specific command id */ 1206 WMI_10X_PDEV_QVIT_CMDID, 1207 1208 /* Offload Scan and Roaming related commands */ 1209 WMI_10X_ROAM_SCAN_MODE, 1210 WMI_10X_ROAM_SCAN_RSSI_THRESHOLD, 1211 WMI_10X_ROAM_SCAN_PERIOD, 1212 WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1213 WMI_10X_ROAM_AP_PROFILE, 1214 WMI_10X_OFL_SCAN_ADD_AP_PROFILE, 1215 WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE, 1216 WMI_10X_OFL_SCAN_PERIOD, 1217 1218 /* P2P specific commands */ 1219 WMI_10X_P2P_DEV_SET_DEVICE_INFO, 1220 WMI_10X_P2P_DEV_SET_DISCOVERABILITY, 1221 WMI_10X_P2P_GO_SET_BEACON_IE, 1222 WMI_10X_P2P_GO_SET_PROBE_RESP_IE, 1223 1224 /* AP power save specific config */ 1225 WMI_10X_AP_PS_PEER_PARAM_CMDID, 1226 WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID, 1227 1228 /* Rate-control specific commands */ 1229 WMI_10X_PEER_RATE_RETRY_SCHED_CMDID, 1230 1231 /* WLAN Profiling commands. */ 1232 WMI_10X_WLAN_PROFILE_TRIGGER_CMDID, 1233 WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1234 WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1235 WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1236 WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1237 1238 /* Suspend resume command Ids */ 1239 WMI_10X_PDEV_SUSPEND_CMDID, 1240 WMI_10X_PDEV_RESUME_CMDID, 1241 1242 /* Beacon filter commands */ 1243 WMI_10X_ADD_BCN_FILTER_CMDID, 1244 WMI_10X_RMV_BCN_FILTER_CMDID, 1245 1246 /* WOW Specific WMI commands*/ 1247 WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID, 1248 WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID, 1249 WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1250 WMI_10X_WOW_ENABLE_CMDID, 1251 WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1252 1253 /* RTT measurement related cmd */ 1254 WMI_10X_RTT_MEASREQ_CMDID, 1255 WMI_10X_RTT_TSF_CMDID, 1256 1257 /* transmit beacon by value */ 1258 WMI_10X_PDEV_SEND_BCN_CMDID, 1259 1260 /* F/W stats */ 1261 WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1262 WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1263 WMI_10X_REQUEST_STATS_CMDID, 1264 1265 /* GPIO Configuration */ 1266 WMI_10X_GPIO_CONFIG_CMDID, 1267 WMI_10X_GPIO_OUTPUT_CMDID, 1268 1269 WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1, 1270 }; 1271 1272 enum wmi_10x_event_id { 1273 WMI_10X_SERVICE_READY_EVENTID = 0x8000, 1274 WMI_10X_READY_EVENTID, 1275 WMI_10X_START_EVENTID = 0x9000, 1276 WMI_10X_END_EVENTID = 0x9FFF, 1277 1278 /* Scan specific events */ 1279 WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID, 1280 WMI_10X_ECHO_EVENTID, 1281 WMI_10X_DEBUG_MESG_EVENTID, 1282 WMI_10X_UPDATE_STATS_EVENTID, 1283 1284 /* Instantaneous RSSI event */ 1285 WMI_10X_INST_RSSI_STATS_EVENTID, 1286 1287 /* VDEV specific events */ 1288 WMI_10X_VDEV_START_RESP_EVENTID, 1289 WMI_10X_VDEV_STANDBY_REQ_EVENTID, 1290 WMI_10X_VDEV_RESUME_REQ_EVENTID, 1291 WMI_10X_VDEV_STOPPED_EVENTID, 1292 1293 /* peer specific events */ 1294 WMI_10X_PEER_STA_KICKOUT_EVENTID, 1295 1296 /* beacon/mgmt specific events */ 1297 WMI_10X_HOST_SWBA_EVENTID, 1298 WMI_10X_TBTTOFFSET_UPDATE_EVENTID, 1299 WMI_10X_MGMT_RX_EVENTID, 1300 1301 /* Channel stats event */ 1302 WMI_10X_CHAN_INFO_EVENTID, 1303 1304 /* PHY Error specific WMI event */ 1305 WMI_10X_PHYERR_EVENTID, 1306 1307 /* Roam event to trigger roaming on host */ 1308 WMI_10X_ROAM_EVENTID, 1309 1310 /* matching AP found from list of profiles */ 1311 WMI_10X_PROFILE_MATCH, 1312 1313 /* debug print message used for tracing FW code while debugging */ 1314 WMI_10X_DEBUG_PRINT_EVENTID, 1315 /* VI spoecific event */ 1316 WMI_10X_PDEV_QVIT_EVENTID, 1317 /* FW code profile data in response to profile request */ 1318 WMI_10X_WLAN_PROFILE_DATA_EVENTID, 1319 1320 /*RTT related event ID*/ 1321 WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID, 1322 WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID, 1323 WMI_10X_RTT_ERROR_REPORT_EVENTID, 1324 1325 WMI_10X_WOW_WAKEUP_HOST_EVENTID, 1326 WMI_10X_DCS_INTERFERENCE_EVENTID, 1327 1328 /* TPC config for the current operating channel */ 1329 WMI_10X_PDEV_TPC_CONFIG_EVENTID, 1330 1331 WMI_10X_GPIO_INPUT_EVENTID, 1332 WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1, 1333 }; 1334 1335 enum wmi_10_2_cmd_id { 1336 WMI_10_2_START_CMDID = 0x9000, 1337 WMI_10_2_END_CMDID = 0x9FFF, 1338 WMI_10_2_INIT_CMDID, 1339 WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID, 1340 WMI_10_2_STOP_SCAN_CMDID, 1341 WMI_10_2_SCAN_CHAN_LIST_CMDID, 1342 WMI_10_2_ECHO_CMDID, 1343 WMI_10_2_PDEV_SET_REGDOMAIN_CMDID, 1344 WMI_10_2_PDEV_SET_CHANNEL_CMDID, 1345 WMI_10_2_PDEV_SET_PARAM_CMDID, 1346 WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID, 1347 WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID, 1348 WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID, 1349 WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID, 1350 WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID, 1351 WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID, 1352 WMI_10_2_PDEV_SET_QUIET_MODE_CMDID, 1353 WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1354 WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID, 1355 WMI_10_2_VDEV_CREATE_CMDID, 1356 WMI_10_2_VDEV_DELETE_CMDID, 1357 WMI_10_2_VDEV_START_REQUEST_CMDID, 1358 WMI_10_2_VDEV_RESTART_REQUEST_CMDID, 1359 WMI_10_2_VDEV_UP_CMDID, 1360 WMI_10_2_VDEV_STOP_CMDID, 1361 WMI_10_2_VDEV_DOWN_CMDID, 1362 WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID, 1363 WMI_10_2_VDEV_RESUME_RESPONSE_CMDID, 1364 WMI_10_2_VDEV_SET_PARAM_CMDID, 1365 WMI_10_2_VDEV_INSTALL_KEY_CMDID, 1366 WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID, 1367 WMI_10_2_PEER_CREATE_CMDID, 1368 WMI_10_2_PEER_DELETE_CMDID, 1369 WMI_10_2_PEER_FLUSH_TIDS_CMDID, 1370 WMI_10_2_PEER_SET_PARAM_CMDID, 1371 WMI_10_2_PEER_ASSOC_CMDID, 1372 WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID, 1373 WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID, 1374 WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID, 1375 WMI_10_2_PEER_MCAST_GROUP_CMDID, 1376 WMI_10_2_BCN_TX_CMDID, 1377 WMI_10_2_BCN_PRB_TMPL_CMDID, 1378 WMI_10_2_BCN_FILTER_RX_CMDID, 1379 WMI_10_2_PRB_REQ_FILTER_RX_CMDID, 1380 WMI_10_2_MGMT_TX_CMDID, 1381 WMI_10_2_ADDBA_CLEAR_RESP_CMDID, 1382 WMI_10_2_ADDBA_SEND_CMDID, 1383 WMI_10_2_ADDBA_STATUS_CMDID, 1384 WMI_10_2_DELBA_SEND_CMDID, 1385 WMI_10_2_ADDBA_SET_RESP_CMDID, 1386 WMI_10_2_SEND_SINGLEAMSDU_CMDID, 1387 WMI_10_2_STA_POWERSAVE_MODE_CMDID, 1388 WMI_10_2_STA_POWERSAVE_PARAM_CMDID, 1389 WMI_10_2_STA_MIMO_PS_MODE_CMDID, 1390 WMI_10_2_DBGLOG_CFG_CMDID, 1391 WMI_10_2_PDEV_DFS_ENABLE_CMDID, 1392 WMI_10_2_PDEV_DFS_DISABLE_CMDID, 1393 WMI_10_2_PDEV_QVIT_CMDID, 1394 WMI_10_2_ROAM_SCAN_MODE, 1395 WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD, 1396 WMI_10_2_ROAM_SCAN_PERIOD, 1397 WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1398 WMI_10_2_ROAM_AP_PROFILE, 1399 WMI_10_2_OFL_SCAN_ADD_AP_PROFILE, 1400 WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE, 1401 WMI_10_2_OFL_SCAN_PERIOD, 1402 WMI_10_2_P2P_DEV_SET_DEVICE_INFO, 1403 WMI_10_2_P2P_DEV_SET_DISCOVERABILITY, 1404 WMI_10_2_P2P_GO_SET_BEACON_IE, 1405 WMI_10_2_P2P_GO_SET_PROBE_RESP_IE, 1406 WMI_10_2_AP_PS_PEER_PARAM_CMDID, 1407 WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID, 1408 WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID, 1409 WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID, 1410 WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1411 WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1412 WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1413 WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1414 WMI_10_2_PDEV_SUSPEND_CMDID, 1415 WMI_10_2_PDEV_RESUME_CMDID, 1416 WMI_10_2_ADD_BCN_FILTER_CMDID, 1417 WMI_10_2_RMV_BCN_FILTER_CMDID, 1418 WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID, 1419 WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID, 1420 WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1421 WMI_10_2_WOW_ENABLE_CMDID, 1422 WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1423 WMI_10_2_RTT_MEASREQ_CMDID, 1424 WMI_10_2_RTT_TSF_CMDID, 1425 WMI_10_2_RTT_KEEPALIVE_CMDID, 1426 WMI_10_2_PDEV_SEND_BCN_CMDID, 1427 WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1428 WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1429 WMI_10_2_REQUEST_STATS_CMDID, 1430 WMI_10_2_GPIO_CONFIG_CMDID, 1431 WMI_10_2_GPIO_OUTPUT_CMDID, 1432 WMI_10_2_VDEV_RATEMASK_CMDID, 1433 WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID, 1434 WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1435 WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1436 WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1437 WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1438 WMI_10_2_FORCE_FW_HANG_CMDID, 1439 WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1440 WMI_10_2_PDEV_SET_CTL_TABLE_CMDID, 1441 WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1442 WMI_10_2_PDEV_RATEPWR_TABLE_CMDID, 1443 WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1444 WMI_10_2_PDEV_GET_INFO, 1445 WMI_10_2_VDEV_GET_INFO, 1446 WMI_10_2_VDEV_ATF_REQUEST_CMDID, 1447 WMI_10_2_PEER_ATF_REQUEST_CMDID, 1448 WMI_10_2_PDEV_GET_TEMPERATURE_CMDID, 1449 WMI_10_2_MU_CAL_START_CMDID, 1450 WMI_10_2_SET_LTEU_CONFIG_CMDID, 1451 WMI_10_2_SET_CCA_PARAMS, 1452 WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1453 WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1, 1454 }; 1455 1456 enum wmi_10_2_event_id { 1457 WMI_10_2_SERVICE_READY_EVENTID = 0x8000, 1458 WMI_10_2_READY_EVENTID, 1459 WMI_10_2_DEBUG_MESG_EVENTID, 1460 WMI_10_2_START_EVENTID = 0x9000, 1461 WMI_10_2_END_EVENTID = 0x9FFF, 1462 WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID, 1463 WMI_10_2_ECHO_EVENTID, 1464 WMI_10_2_UPDATE_STATS_EVENTID, 1465 WMI_10_2_INST_RSSI_STATS_EVENTID, 1466 WMI_10_2_VDEV_START_RESP_EVENTID, 1467 WMI_10_2_VDEV_STANDBY_REQ_EVENTID, 1468 WMI_10_2_VDEV_RESUME_REQ_EVENTID, 1469 WMI_10_2_VDEV_STOPPED_EVENTID, 1470 WMI_10_2_PEER_STA_KICKOUT_EVENTID, 1471 WMI_10_2_HOST_SWBA_EVENTID, 1472 WMI_10_2_TBTTOFFSET_UPDATE_EVENTID, 1473 WMI_10_2_MGMT_RX_EVENTID, 1474 WMI_10_2_CHAN_INFO_EVENTID, 1475 WMI_10_2_PHYERR_EVENTID, 1476 WMI_10_2_ROAM_EVENTID, 1477 WMI_10_2_PROFILE_MATCH, 1478 WMI_10_2_DEBUG_PRINT_EVENTID, 1479 WMI_10_2_PDEV_QVIT_EVENTID, 1480 WMI_10_2_WLAN_PROFILE_DATA_EVENTID, 1481 WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID, 1482 WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID, 1483 WMI_10_2_RTT_ERROR_REPORT_EVENTID, 1484 WMI_10_2_RTT_KEEPALIVE_EVENTID, 1485 WMI_10_2_WOW_WAKEUP_HOST_EVENTID, 1486 WMI_10_2_DCS_INTERFERENCE_EVENTID, 1487 WMI_10_2_PDEV_TPC_CONFIG_EVENTID, 1488 WMI_10_2_GPIO_INPUT_EVENTID, 1489 WMI_10_2_PEER_RATECODE_LIST_EVENTID, 1490 WMI_10_2_GENERIC_BUFFER_EVENTID, 1491 WMI_10_2_MCAST_BUF_RELEASE_EVENTID, 1492 WMI_10_2_MCAST_LIST_AGEOUT_EVENTID, 1493 WMI_10_2_WDS_PEER_EVENTID, 1494 WMI_10_2_PEER_STA_PS_STATECHG_EVENTID, 1495 WMI_10_2_PDEV_TEMPERATURE_EVENTID, 1496 WMI_10_2_MU_REPORT_EVENTID, 1497 WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID, 1498 WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1, 1499 }; 1500 1501 enum wmi_10_4_cmd_id { 1502 WMI_10_4_START_CMDID = 0x9000, 1503 WMI_10_4_END_CMDID = 0x9FFF, 1504 WMI_10_4_INIT_CMDID, 1505 WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID, 1506 WMI_10_4_STOP_SCAN_CMDID, 1507 WMI_10_4_SCAN_CHAN_LIST_CMDID, 1508 WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID, 1509 WMI_10_4_SCAN_UPDATE_REQUEST_CMDID, 1510 WMI_10_4_ECHO_CMDID, 1511 WMI_10_4_PDEV_SET_REGDOMAIN_CMDID, 1512 WMI_10_4_PDEV_SET_CHANNEL_CMDID, 1513 WMI_10_4_PDEV_SET_PARAM_CMDID, 1514 WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID, 1515 WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID, 1516 WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID, 1517 WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID, 1518 WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID, 1519 WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID, 1520 WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID, 1521 WMI_10_4_PDEV_SET_QUIET_MODE_CMDID, 1522 WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1523 WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID, 1524 WMI_10_4_VDEV_CREATE_CMDID, 1525 WMI_10_4_VDEV_DELETE_CMDID, 1526 WMI_10_4_VDEV_START_REQUEST_CMDID, 1527 WMI_10_4_VDEV_RESTART_REQUEST_CMDID, 1528 WMI_10_4_VDEV_UP_CMDID, 1529 WMI_10_4_VDEV_STOP_CMDID, 1530 WMI_10_4_VDEV_DOWN_CMDID, 1531 WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID, 1532 WMI_10_4_VDEV_RESUME_RESPONSE_CMDID, 1533 WMI_10_4_VDEV_SET_PARAM_CMDID, 1534 WMI_10_4_VDEV_INSTALL_KEY_CMDID, 1535 WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID, 1536 WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID, 1537 WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID, 1538 WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID, 1539 WMI_10_4_PEER_CREATE_CMDID, 1540 WMI_10_4_PEER_DELETE_CMDID, 1541 WMI_10_4_PEER_FLUSH_TIDS_CMDID, 1542 WMI_10_4_PEER_SET_PARAM_CMDID, 1543 WMI_10_4_PEER_ASSOC_CMDID, 1544 WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID, 1545 WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID, 1546 WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID, 1547 WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID, 1548 WMI_10_4_PEER_MCAST_GROUP_CMDID, 1549 WMI_10_4_BCN_TX_CMDID, 1550 WMI_10_4_PDEV_SEND_BCN_CMDID, 1551 WMI_10_4_BCN_PRB_TMPL_CMDID, 1552 WMI_10_4_BCN_FILTER_RX_CMDID, 1553 WMI_10_4_PRB_REQ_FILTER_RX_CMDID, 1554 WMI_10_4_MGMT_TX_CMDID, 1555 WMI_10_4_PRB_TMPL_CMDID, 1556 WMI_10_4_ADDBA_CLEAR_RESP_CMDID, 1557 WMI_10_4_ADDBA_SEND_CMDID, 1558 WMI_10_4_ADDBA_STATUS_CMDID, 1559 WMI_10_4_DELBA_SEND_CMDID, 1560 WMI_10_4_ADDBA_SET_RESP_CMDID, 1561 WMI_10_4_SEND_SINGLEAMSDU_CMDID, 1562 WMI_10_4_STA_POWERSAVE_MODE_CMDID, 1563 WMI_10_4_STA_POWERSAVE_PARAM_CMDID, 1564 WMI_10_4_STA_MIMO_PS_MODE_CMDID, 1565 WMI_10_4_DBGLOG_CFG_CMDID, 1566 WMI_10_4_PDEV_DFS_ENABLE_CMDID, 1567 WMI_10_4_PDEV_DFS_DISABLE_CMDID, 1568 WMI_10_4_PDEV_QVIT_CMDID, 1569 WMI_10_4_ROAM_SCAN_MODE, 1570 WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD, 1571 WMI_10_4_ROAM_SCAN_PERIOD, 1572 WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1573 WMI_10_4_ROAM_AP_PROFILE, 1574 WMI_10_4_OFL_SCAN_ADD_AP_PROFILE, 1575 WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE, 1576 WMI_10_4_OFL_SCAN_PERIOD, 1577 WMI_10_4_P2P_DEV_SET_DEVICE_INFO, 1578 WMI_10_4_P2P_DEV_SET_DISCOVERABILITY, 1579 WMI_10_4_P2P_GO_SET_BEACON_IE, 1580 WMI_10_4_P2P_GO_SET_PROBE_RESP_IE, 1581 WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID, 1582 WMI_10_4_AP_PS_PEER_PARAM_CMDID, 1583 WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID, 1584 WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID, 1585 WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID, 1586 WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1587 WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1588 WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1589 WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1590 WMI_10_4_PDEV_SUSPEND_CMDID, 1591 WMI_10_4_PDEV_RESUME_CMDID, 1592 WMI_10_4_ADD_BCN_FILTER_CMDID, 1593 WMI_10_4_RMV_BCN_FILTER_CMDID, 1594 WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID, 1595 WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID, 1596 WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1597 WMI_10_4_WOW_ENABLE_CMDID, 1598 WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1599 WMI_10_4_RTT_MEASREQ_CMDID, 1600 WMI_10_4_RTT_TSF_CMDID, 1601 WMI_10_4_RTT_KEEPALIVE_CMDID, 1602 WMI_10_4_OEM_REQ_CMDID, 1603 WMI_10_4_NAN_CMDID, 1604 WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1605 WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1606 WMI_10_4_REQUEST_STATS_CMDID, 1607 WMI_10_4_GPIO_CONFIG_CMDID, 1608 WMI_10_4_GPIO_OUTPUT_CMDID, 1609 WMI_10_4_VDEV_RATEMASK_CMDID, 1610 WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID, 1611 WMI_10_4_GTK_OFFLOAD_CMDID, 1612 WMI_10_4_QBOOST_CFG_CMDID, 1613 WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID, 1614 WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID, 1615 WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1616 WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1617 WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1618 WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1619 WMI_10_4_VDEV_SET_KEEPALIVE_CMDID, 1620 WMI_10_4_VDEV_GET_KEEPALIVE_CMDID, 1621 WMI_10_4_FORCE_FW_HANG_CMDID, 1622 WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1623 WMI_10_4_PDEV_SET_CTL_TABLE_CMDID, 1624 WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1625 WMI_10_4_PDEV_RATEPWR_TABLE_CMDID, 1626 WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1627 WMI_10_4_PDEV_FIPS_CMDID, 1628 WMI_10_4_TT_SET_CONF_CMDID, 1629 WMI_10_4_FWTEST_CMDID, 1630 WMI_10_4_VDEV_ATF_REQUEST_CMDID, 1631 WMI_10_4_PEER_ATF_REQUEST_CMDID, 1632 WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID, 1633 WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID, 1634 WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID, 1635 WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID, 1636 WMI_10_4_PDEV_GET_TPC_CMDID, 1637 WMI_10_4_PDEV_GET_AST_INFO_CMDID, 1638 WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID, 1639 WMI_10_4_PDEV_GET_TEMPERATURE_CMDID, 1640 WMI_10_4_PDEV_GET_INFO_CMDID, 1641 WMI_10_4_VDEV_GET_INFO_CMDID, 1642 WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID, 1643 WMI_10_4_MU_CAL_START_CMDID, 1644 WMI_10_4_SET_CCA_PARAMS_CMDID, 1645 WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1646 WMI_10_4_EXT_RESOURCE_CFG_CMDID, 1647 WMI_10_4_VDEV_SET_IE_CMDID, 1648 WMI_10_4_SET_LTEU_CONFIG_CMDID, 1649 WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1, 1650 }; 1651 1652 enum wmi_10_4_event_id { 1653 WMI_10_4_SERVICE_READY_EVENTID = 0x8000, 1654 WMI_10_4_READY_EVENTID, 1655 WMI_10_4_DEBUG_MESG_EVENTID, 1656 WMI_10_4_START_EVENTID = 0x9000, 1657 WMI_10_4_END_EVENTID = 0x9FFF, 1658 WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID, 1659 WMI_10_4_ECHO_EVENTID, 1660 WMI_10_4_UPDATE_STATS_EVENTID, 1661 WMI_10_4_INST_RSSI_STATS_EVENTID, 1662 WMI_10_4_VDEV_START_RESP_EVENTID, 1663 WMI_10_4_VDEV_STANDBY_REQ_EVENTID, 1664 WMI_10_4_VDEV_RESUME_REQ_EVENTID, 1665 WMI_10_4_VDEV_STOPPED_EVENTID, 1666 WMI_10_4_PEER_STA_KICKOUT_EVENTID, 1667 WMI_10_4_HOST_SWBA_EVENTID, 1668 WMI_10_4_TBTTOFFSET_UPDATE_EVENTID, 1669 WMI_10_4_MGMT_RX_EVENTID, 1670 WMI_10_4_CHAN_INFO_EVENTID, 1671 WMI_10_4_PHYERR_EVENTID, 1672 WMI_10_4_ROAM_EVENTID, 1673 WMI_10_4_PROFILE_MATCH, 1674 WMI_10_4_DEBUG_PRINT_EVENTID, 1675 WMI_10_4_PDEV_QVIT_EVENTID, 1676 WMI_10_4_WLAN_PROFILE_DATA_EVENTID, 1677 WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID, 1678 WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID, 1679 WMI_10_4_RTT_ERROR_REPORT_EVENTID, 1680 WMI_10_4_RTT_KEEPALIVE_EVENTID, 1681 WMI_10_4_OEM_CAPABILITY_EVENTID, 1682 WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID, 1683 WMI_10_4_OEM_ERROR_REPORT_EVENTID, 1684 WMI_10_4_NAN_EVENTID, 1685 WMI_10_4_WOW_WAKEUP_HOST_EVENTID, 1686 WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID, 1687 WMI_10_4_GTK_REKEY_FAIL_EVENTID, 1688 WMI_10_4_DCS_INTERFERENCE_EVENTID, 1689 WMI_10_4_PDEV_TPC_CONFIG_EVENTID, 1690 WMI_10_4_CSA_HANDLING_EVENTID, 1691 WMI_10_4_GPIO_INPUT_EVENTID, 1692 WMI_10_4_PEER_RATECODE_LIST_EVENTID, 1693 WMI_10_4_GENERIC_BUFFER_EVENTID, 1694 WMI_10_4_MCAST_BUF_RELEASE_EVENTID, 1695 WMI_10_4_MCAST_LIST_AGEOUT_EVENTID, 1696 WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID, 1697 WMI_10_4_WDS_PEER_EVENTID, 1698 WMI_10_4_PEER_STA_PS_STATECHG_EVENTID, 1699 WMI_10_4_PDEV_FIPS_EVENTID, 1700 WMI_10_4_TT_STATS_EVENTID, 1701 WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID, 1702 WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID, 1703 WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID, 1704 WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID, 1705 WMI_10_4_PDEV_NFCAL_POWER_EVENTID, 1706 WMI_10_4_PDEV_TPC_EVENTID, 1707 WMI_10_4_PDEV_GET_AST_INFO_EVENTID, 1708 WMI_10_4_PDEV_TEMPERATURE_EVENTID, 1709 WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID, 1710 WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID, 1711 WMI_10_4_MU_REPORT_EVENTID, 1712 WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1, 1713 }; 1714 1715 enum wmi_phy_mode { 1716 MODE_11A = 0, /* 11a Mode */ 1717 MODE_11G = 1, /* 11b/g Mode */ 1718 MODE_11B = 2, /* 11b Mode */ 1719 MODE_11GONLY = 3, /* 11g only Mode */ 1720 MODE_11NA_HT20 = 4, /* 11a HT20 mode */ 1721 MODE_11NG_HT20 = 5, /* 11g HT20 mode */ 1722 MODE_11NA_HT40 = 6, /* 11a HT40 mode */ 1723 MODE_11NG_HT40 = 7, /* 11g HT40 mode */ 1724 MODE_11AC_VHT20 = 8, 1725 MODE_11AC_VHT40 = 9, 1726 MODE_11AC_VHT80 = 10, 1727 /* MODE_11AC_VHT160 = 11, */ 1728 MODE_11AC_VHT20_2G = 11, 1729 MODE_11AC_VHT40_2G = 12, 1730 MODE_11AC_VHT80_2G = 13, 1731 MODE_UNKNOWN = 14, 1732 MODE_MAX = 14 1733 }; 1734 1735 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode) 1736 { 1737 switch (mode) { 1738 case MODE_11A: 1739 return "11a"; 1740 case MODE_11G: 1741 return "11g"; 1742 case MODE_11B: 1743 return "11b"; 1744 case MODE_11GONLY: 1745 return "11gonly"; 1746 case MODE_11NA_HT20: 1747 return "11na-ht20"; 1748 case MODE_11NG_HT20: 1749 return "11ng-ht20"; 1750 case MODE_11NA_HT40: 1751 return "11na-ht40"; 1752 case MODE_11NG_HT40: 1753 return "11ng-ht40"; 1754 case MODE_11AC_VHT20: 1755 return "11ac-vht20"; 1756 case MODE_11AC_VHT40: 1757 return "11ac-vht40"; 1758 case MODE_11AC_VHT80: 1759 return "11ac-vht80"; 1760 case MODE_11AC_VHT20_2G: 1761 return "11ac-vht20-2g"; 1762 case MODE_11AC_VHT40_2G: 1763 return "11ac-vht40-2g"; 1764 case MODE_11AC_VHT80_2G: 1765 return "11ac-vht80-2g"; 1766 case MODE_UNKNOWN: 1767 /* skip */ 1768 break; 1769 1770 /* no default handler to allow compiler to check that the 1771 * enum is fully handled */ 1772 }; 1773 1774 return "<unknown>"; 1775 } 1776 1777 #define WMI_CHAN_LIST_TAG 0x1 1778 #define WMI_SSID_LIST_TAG 0x2 1779 #define WMI_BSSID_LIST_TAG 0x3 1780 #define WMI_IE_TAG 0x4 1781 1782 struct wmi_channel { 1783 __le32 mhz; 1784 __le32 band_center_freq1; 1785 __le32 band_center_freq2; /* valid for 11ac, 80plus80 */ 1786 union { 1787 __le32 flags; /* WMI_CHAN_FLAG_ */ 1788 struct { 1789 u8 mode; /* only 6 LSBs */ 1790 } __packed; 1791 } __packed; 1792 union { 1793 __le32 reginfo0; 1794 struct { 1795 /* note: power unit is 0.5 dBm */ 1796 u8 min_power; 1797 u8 max_power; 1798 u8 reg_power; 1799 u8 reg_classid; 1800 } __packed; 1801 } __packed; 1802 union { 1803 __le32 reginfo1; 1804 struct { 1805 u8 antenna_max; 1806 u8 max_tx_power; 1807 } __packed; 1808 } __packed; 1809 } __packed; 1810 1811 struct wmi_channel_arg { 1812 u32 freq; 1813 u32 band_center_freq1; 1814 bool passive; 1815 bool allow_ibss; 1816 bool allow_ht; 1817 bool allow_vht; 1818 bool ht40plus; 1819 bool chan_radar; 1820 /* note: power unit is 0.5 dBm */ 1821 u32 min_power; 1822 u32 max_power; 1823 u32 max_reg_power; 1824 u32 max_antenna_gain; 1825 u32 reg_class_id; 1826 enum wmi_phy_mode mode; 1827 }; 1828 1829 enum wmi_channel_change_cause { 1830 WMI_CHANNEL_CHANGE_CAUSE_NONE = 0, 1831 WMI_CHANNEL_CHANGE_CAUSE_CSA, 1832 }; 1833 1834 #define WMI_CHAN_FLAG_HT40_PLUS (1 << 6) 1835 #define WMI_CHAN_FLAG_PASSIVE (1 << 7) 1836 #define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8) 1837 #define WMI_CHAN_FLAG_AP_DISABLED (1 << 9) 1838 #define WMI_CHAN_FLAG_DFS (1 << 10) 1839 #define WMI_CHAN_FLAG_ALLOW_HT (1 << 11) 1840 #define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12) 1841 1842 /* Indicate reason for channel switch */ 1843 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13) 1844 1845 #define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */ 1846 1847 /* HT Capabilities*/ 1848 #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ 1849 #define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */ 1850 #define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ 1851 #define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ 1852 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3 1853 #define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ 1854 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4 1855 #define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */ 1856 #define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ 1857 #define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ 1858 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 1859 #define WMI_HT_CAP_HT40_SGI 0x0800 1860 1861 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \ 1862 WMI_HT_CAP_HT20_SGI | \ 1863 WMI_HT_CAP_HT40_SGI | \ 1864 WMI_HT_CAP_TX_STBC | \ 1865 WMI_HT_CAP_RX_STBC | \ 1866 WMI_HT_CAP_LDPC) 1867 1868 /* 1869 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information 1870 * field. The fields not defined here are not supported, or reserved. 1871 * Do not change these masks and if you have to add new one follow the 1872 * bitmask as specified by 802.11ac draft. 1873 */ 1874 1875 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 1876 #define WMI_VHT_CAP_RX_LDPC 0x00000010 1877 #define WMI_VHT_CAP_SGI_80MHZ 0x00000020 1878 #define WMI_VHT_CAP_TX_STBC 0x00000080 1879 #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300 1880 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8 1881 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 1882 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23 1883 #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000 1884 #define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000 1885 1886 /* The following also refer for max HT AMSDU */ 1887 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000 1888 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001 1889 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 1890 1891 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \ 1892 WMI_VHT_CAP_RX_LDPC | \ 1893 WMI_VHT_CAP_SGI_80MHZ | \ 1894 WMI_VHT_CAP_TX_STBC | \ 1895 WMI_VHT_CAP_RX_STBC_MASK | \ 1896 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \ 1897 WMI_VHT_CAP_RX_FIXED_ANT | \ 1898 WMI_VHT_CAP_TX_FIXED_ANT) 1899 1900 /* 1901 * Interested readers refer to Rx/Tx MCS Map definition as defined in 1902 * 802.11ac 1903 */ 1904 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) 1905 #define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 1906 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 1907 1908 enum { 1909 REGDMN_MODE_11A = 0x00001, /* 11a channels */ 1910 REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */ 1911 REGDMN_MODE_11B = 0x00004, /* 11b channels */ 1912 REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */ 1913 REGDMN_MODE_11G = 0x00008, /* XXX historical */ 1914 REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */ 1915 REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */ 1916 REGDMN_MODE_XR = 0x00100, /* XR channels */ 1917 REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */ 1918 REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */ 1919 REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */ 1920 REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */ 1921 REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */ 1922 REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */ 1923 REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */ 1924 REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */ 1925 REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */ 1926 REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */ 1927 REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */ 1928 REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */ 1929 REGDMN_MODE_ALL = 0xffffffff 1930 }; 1931 1932 #define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001 1933 #define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002 1934 #define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004 1935 1936 /* regulatory capabilities */ 1937 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040 1938 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080 1939 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100 1940 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200 1941 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400 1942 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800 1943 1944 struct hal_reg_capabilities { 1945 /* regdomain value specified in EEPROM */ 1946 __le32 eeprom_rd; 1947 /*regdomain */ 1948 __le32 eeprom_rd_ext; 1949 /* CAP1 capabilities bit map. */ 1950 __le32 regcap1; 1951 /* REGDMN EEPROM CAP. */ 1952 __le32 regcap2; 1953 /* REGDMN MODE */ 1954 __le32 wireless_modes; 1955 __le32 low_2ghz_chan; 1956 __le32 high_2ghz_chan; 1957 __le32 low_5ghz_chan; 1958 __le32 high_5ghz_chan; 1959 } __packed; 1960 1961 enum wlan_mode_capability { 1962 WHAL_WLAN_11A_CAPABILITY = 0x1, 1963 WHAL_WLAN_11G_CAPABILITY = 0x2, 1964 WHAL_WLAN_11AG_CAPABILITY = 0x3, 1965 }; 1966 1967 /* structure used by FW for requesting host memory */ 1968 struct wlan_host_mem_req { 1969 /* ID of the request */ 1970 __le32 req_id; 1971 /* size of the of each unit */ 1972 __le32 unit_size; 1973 /* flags to indicate that 1974 * the number units is dependent 1975 * on number of resources(num vdevs num peers .. etc) 1976 */ 1977 __le32 num_unit_info; 1978 /* 1979 * actual number of units to allocate . if flags in the num_unit_info 1980 * indicate that number of units is tied to number of a particular 1981 * resource to allocate then num_units filed is set to 0 and host 1982 * will derive the number units from number of the resources it is 1983 * requesting. 1984 */ 1985 __le32 num_units; 1986 } __packed; 1987 1988 /* 1989 * The following struct holds optional payload for 1990 * wmi_service_ready_event,e.g., 11ac pass some of the 1991 * device capability to the host. 1992 */ 1993 struct wmi_service_ready_event { 1994 __le32 sw_version; 1995 __le32 sw_version_1; 1996 __le32 abi_version; 1997 /* WMI_PHY_CAPABILITY */ 1998 __le32 phy_capability; 1999 /* Maximum number of frag table entries that SW will populate less 1 */ 2000 __le32 max_frag_entry; 2001 __le32 wmi_service_bitmap[16]; 2002 __le32 num_rf_chains; 2003 /* 2004 * The following field is only valid for service type 2005 * WMI_SERVICE_11AC 2006 */ 2007 __le32 ht_cap_info; /* WMI HT Capability */ 2008 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2009 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2010 __le32 hw_min_tx_power; 2011 __le32 hw_max_tx_power; 2012 struct hal_reg_capabilities hal_reg_capabilities; 2013 __le32 sys_cap_info; 2014 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2015 /* 2016 * Max beacon and Probe Response IE offload size 2017 * (includes optional P2P IEs) 2018 */ 2019 __le32 max_bcn_ie_size; 2020 /* 2021 * request to host to allocate a chuck of memory and pss it down to FW 2022 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2023 * data structures. Only valid for low latency interfaces like PCIE 2024 * where FW can access this memory directly (or) by DMA. 2025 */ 2026 __le32 num_mem_reqs; 2027 struct wlan_host_mem_req mem_reqs[0]; 2028 } __packed; 2029 2030 /* This is the definition from 10.X firmware branch */ 2031 struct wmi_10x_service_ready_event { 2032 __le32 sw_version; 2033 __le32 abi_version; 2034 2035 /* WMI_PHY_CAPABILITY */ 2036 __le32 phy_capability; 2037 2038 /* Maximum number of frag table entries that SW will populate less 1 */ 2039 __le32 max_frag_entry; 2040 __le32 wmi_service_bitmap[16]; 2041 __le32 num_rf_chains; 2042 2043 /* 2044 * The following field is only valid for service type 2045 * WMI_SERVICE_11AC 2046 */ 2047 __le32 ht_cap_info; /* WMI HT Capability */ 2048 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2049 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2050 __le32 hw_min_tx_power; 2051 __le32 hw_max_tx_power; 2052 2053 struct hal_reg_capabilities hal_reg_capabilities; 2054 2055 __le32 sys_cap_info; 2056 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2057 2058 /* 2059 * request to host to allocate a chuck of memory and pss it down to FW 2060 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2061 * data structures. Only valid for low latency interfaces like PCIE 2062 * where FW can access this memory directly (or) by DMA. 2063 */ 2064 __le32 num_mem_reqs; 2065 2066 struct wlan_host_mem_req mem_reqs[0]; 2067 } __packed; 2068 2069 #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ) 2070 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ) 2071 2072 struct wmi_ready_event { 2073 __le32 sw_version; 2074 __le32 abi_version; 2075 struct wmi_mac_addr mac_addr; 2076 __le32 status; 2077 } __packed; 2078 2079 struct wmi_resource_config { 2080 /* number of virtual devices (VAPs) to support */ 2081 __le32 num_vdevs; 2082 2083 /* number of peer nodes to support */ 2084 __le32 num_peers; 2085 2086 /* 2087 * In offload mode target supports features like WOW, chatter and 2088 * other protocol offloads. In order to support them some 2089 * functionalities like reorder buffering, PN checking need to be 2090 * done in target. This determines maximum number of peers supported 2091 * by target in offload mode 2092 */ 2093 __le32 num_offload_peers; 2094 2095 /* For target-based RX reordering */ 2096 __le32 num_offload_reorder_bufs; 2097 2098 /* number of keys per peer */ 2099 __le32 num_peer_keys; 2100 2101 /* total number of TX/RX data TIDs */ 2102 __le32 num_tids; 2103 2104 /* 2105 * max skid for resolving hash collisions 2106 * 2107 * The address search table is sparse, so that if two MAC addresses 2108 * result in the same hash value, the second of these conflicting 2109 * entries can slide to the next index in the address search table, 2110 * and use it, if it is unoccupied. This ast_skid_limit parameter 2111 * specifies the upper bound on how many subsequent indices to search 2112 * over to find an unoccupied space. 2113 */ 2114 __le32 ast_skid_limit; 2115 2116 /* 2117 * the nominal chain mask for transmit 2118 * 2119 * The chain mask may be modified dynamically, e.g. to operate AP 2120 * tx with a reduced number of chains if no clients are associated. 2121 * This configuration parameter specifies the nominal chain-mask that 2122 * should be used when not operating with a reduced set of tx chains. 2123 */ 2124 __le32 tx_chain_mask; 2125 2126 /* 2127 * the nominal chain mask for receive 2128 * 2129 * The chain mask may be modified dynamically, e.g. for a client 2130 * to use a reduced number of chains for receive if the traffic to 2131 * the client is low enough that it doesn't require downlink MIMO 2132 * or antenna diversity. 2133 * This configuration parameter specifies the nominal chain-mask that 2134 * should be used when not operating with a reduced set of rx chains. 2135 */ 2136 __le32 rx_chain_mask; 2137 2138 /* 2139 * what rx reorder timeout (ms) to use for the AC 2140 * 2141 * Each WMM access class (voice, video, best-effort, background) will 2142 * have its own timeout value to dictate how long to wait for missing 2143 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2144 * already been received. 2145 * This parameter specifies the timeout in milliseconds for each 2146 * class. 2147 */ 2148 __le32 rx_timeout_pri_vi; 2149 __le32 rx_timeout_pri_vo; 2150 __le32 rx_timeout_pri_be; 2151 __le32 rx_timeout_pri_bk; 2152 2153 /* 2154 * what mode the rx should decap packets to 2155 * 2156 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2157 * THis setting also determines the default TX behavior, however TX 2158 * behavior can be modified on a per VAP basis during VAP init 2159 */ 2160 __le32 rx_decap_mode; 2161 2162 /* what is the maximum number of scan requests that can be queued */ 2163 __le32 scan_max_pending_reqs; 2164 2165 /* maximum VDEV that could use BMISS offload */ 2166 __le32 bmiss_offload_max_vdev; 2167 2168 /* maximum VDEV that could use offload roaming */ 2169 __le32 roam_offload_max_vdev; 2170 2171 /* maximum AP profiles that would push to offload roaming */ 2172 __le32 roam_offload_max_ap_profiles; 2173 2174 /* 2175 * how many groups to use for mcast->ucast conversion 2176 * 2177 * The target's WAL maintains a table to hold information regarding 2178 * which peers belong to a given multicast group, so that if 2179 * multicast->unicast conversion is enabled, the target can convert 2180 * multicast tx frames to a series of unicast tx frames, to each 2181 * peer within the multicast group. 2182 This num_mcast_groups configuration parameter tells the target how 2183 * many multicast groups to provide storage for within its multicast 2184 * group membership table. 2185 */ 2186 __le32 num_mcast_groups; 2187 2188 /* 2189 * size to alloc for the mcast membership table 2190 * 2191 * This num_mcast_table_elems configuration parameter tells the 2192 * target how many peer elements it needs to provide storage for in 2193 * its multicast group membership table. 2194 * These multicast group membership table elements are shared by the 2195 * multicast groups stored within the table. 2196 */ 2197 __le32 num_mcast_table_elems; 2198 2199 /* 2200 * whether/how to do multicast->unicast conversion 2201 * 2202 * This configuration parameter specifies whether the target should 2203 * perform multicast --> unicast conversion on transmit, and if so, 2204 * what to do if it finds no entries in its multicast group 2205 * membership table for the multicast IP address in the tx frame. 2206 * Configuration value: 2207 * 0 -> Do not perform multicast to unicast conversion. 2208 * 1 -> Convert multicast frames to unicast, if the IP multicast 2209 * address from the tx frame is found in the multicast group 2210 * membership table. If the IP multicast address is not found, 2211 * drop the frame. 2212 * 2 -> Convert multicast frames to unicast, if the IP multicast 2213 * address from the tx frame is found in the multicast group 2214 * membership table. If the IP multicast address is not found, 2215 * transmit the frame as multicast. 2216 */ 2217 __le32 mcast2ucast_mode; 2218 2219 /* 2220 * how much memory to allocate for a tx PPDU dbg log 2221 * 2222 * This parameter controls how much memory the target will allocate 2223 * to store a log of tx PPDU meta-information (how large the PPDU 2224 * was, when it was sent, whether it was successful, etc.) 2225 */ 2226 __le32 tx_dbg_log_size; 2227 2228 /* how many AST entries to be allocated for WDS */ 2229 __le32 num_wds_entries; 2230 2231 /* 2232 * MAC DMA burst size, e.g., For target PCI limit can be 2233 * 0 -default, 1 256B 2234 */ 2235 __le32 dma_burst_size; 2236 2237 /* 2238 * Fixed delimiters to be inserted after every MPDU to 2239 * account for interface latency to avoid underrun. 2240 */ 2241 __le32 mac_aggr_delim; 2242 2243 /* 2244 * determine whether target is responsible for detecting duplicate 2245 * non-aggregate MPDU and timing out stale fragments. 2246 * 2247 * A-MPDU reordering is always performed on the target. 2248 * 2249 * 0: target responsible for frag timeout and dup checking 2250 * 1: host responsible for frag timeout and dup checking 2251 */ 2252 __le32 rx_skip_defrag_timeout_dup_detection_check; 2253 2254 /* 2255 * Configuration for VoW : 2256 * No of Video Nodes to be supported 2257 * and Max no of descriptors for each Video link (node). 2258 */ 2259 __le32 vow_config; 2260 2261 /* maximum VDEV that could use GTK offload */ 2262 __le32 gtk_offload_max_vdev; 2263 2264 /* Number of msdu descriptors target should use */ 2265 __le32 num_msdu_desc; 2266 2267 /* 2268 * Max. number of Tx fragments per MSDU 2269 * This parameter controls the max number of Tx fragments per MSDU. 2270 * This is sent by the target as part of the WMI_SERVICE_READY event 2271 * and is overridden by the OS shim as required. 2272 */ 2273 __le32 max_frag_entries; 2274 } __packed; 2275 2276 struct wmi_resource_config_10x { 2277 /* number of virtual devices (VAPs) to support */ 2278 __le32 num_vdevs; 2279 2280 /* number of peer nodes to support */ 2281 __le32 num_peers; 2282 2283 /* number of keys per peer */ 2284 __le32 num_peer_keys; 2285 2286 /* total number of TX/RX data TIDs */ 2287 __le32 num_tids; 2288 2289 /* 2290 * max skid for resolving hash collisions 2291 * 2292 * The address search table is sparse, so that if two MAC addresses 2293 * result in the same hash value, the second of these conflicting 2294 * entries can slide to the next index in the address search table, 2295 * and use it, if it is unoccupied. This ast_skid_limit parameter 2296 * specifies the upper bound on how many subsequent indices to search 2297 * over to find an unoccupied space. 2298 */ 2299 __le32 ast_skid_limit; 2300 2301 /* 2302 * the nominal chain mask for transmit 2303 * 2304 * The chain mask may be modified dynamically, e.g. to operate AP 2305 * tx with a reduced number of chains if no clients are associated. 2306 * This configuration parameter specifies the nominal chain-mask that 2307 * should be used when not operating with a reduced set of tx chains. 2308 */ 2309 __le32 tx_chain_mask; 2310 2311 /* 2312 * the nominal chain mask for receive 2313 * 2314 * The chain mask may be modified dynamically, e.g. for a client 2315 * to use a reduced number of chains for receive if the traffic to 2316 * the client is low enough that it doesn't require downlink MIMO 2317 * or antenna diversity. 2318 * This configuration parameter specifies the nominal chain-mask that 2319 * should be used when not operating with a reduced set of rx chains. 2320 */ 2321 __le32 rx_chain_mask; 2322 2323 /* 2324 * what rx reorder timeout (ms) to use for the AC 2325 * 2326 * Each WMM access class (voice, video, best-effort, background) will 2327 * have its own timeout value to dictate how long to wait for missing 2328 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2329 * already been received. 2330 * This parameter specifies the timeout in milliseconds for each 2331 * class. 2332 */ 2333 __le32 rx_timeout_pri_vi; 2334 __le32 rx_timeout_pri_vo; 2335 __le32 rx_timeout_pri_be; 2336 __le32 rx_timeout_pri_bk; 2337 2338 /* 2339 * what mode the rx should decap packets to 2340 * 2341 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2342 * THis setting also determines the default TX behavior, however TX 2343 * behavior can be modified on a per VAP basis during VAP init 2344 */ 2345 __le32 rx_decap_mode; 2346 2347 /* what is the maximum number of scan requests that can be queued */ 2348 __le32 scan_max_pending_reqs; 2349 2350 /* maximum VDEV that could use BMISS offload */ 2351 __le32 bmiss_offload_max_vdev; 2352 2353 /* maximum VDEV that could use offload roaming */ 2354 __le32 roam_offload_max_vdev; 2355 2356 /* maximum AP profiles that would push to offload roaming */ 2357 __le32 roam_offload_max_ap_profiles; 2358 2359 /* 2360 * how many groups to use for mcast->ucast conversion 2361 * 2362 * The target's WAL maintains a table to hold information regarding 2363 * which peers belong to a given multicast group, so that if 2364 * multicast->unicast conversion is enabled, the target can convert 2365 * multicast tx frames to a series of unicast tx frames, to each 2366 * peer within the multicast group. 2367 This num_mcast_groups configuration parameter tells the target how 2368 * many multicast groups to provide storage for within its multicast 2369 * group membership table. 2370 */ 2371 __le32 num_mcast_groups; 2372 2373 /* 2374 * size to alloc for the mcast membership table 2375 * 2376 * This num_mcast_table_elems configuration parameter tells the 2377 * target how many peer elements it needs to provide storage for in 2378 * its multicast group membership table. 2379 * These multicast group membership table elements are shared by the 2380 * multicast groups stored within the table. 2381 */ 2382 __le32 num_mcast_table_elems; 2383 2384 /* 2385 * whether/how to do multicast->unicast conversion 2386 * 2387 * This configuration parameter specifies whether the target should 2388 * perform multicast --> unicast conversion on transmit, and if so, 2389 * what to do if it finds no entries in its multicast group 2390 * membership table for the multicast IP address in the tx frame. 2391 * Configuration value: 2392 * 0 -> Do not perform multicast to unicast conversion. 2393 * 1 -> Convert multicast frames to unicast, if the IP multicast 2394 * address from the tx frame is found in the multicast group 2395 * membership table. If the IP multicast address is not found, 2396 * drop the frame. 2397 * 2 -> Convert multicast frames to unicast, if the IP multicast 2398 * address from the tx frame is found in the multicast group 2399 * membership table. If the IP multicast address is not found, 2400 * transmit the frame as multicast. 2401 */ 2402 __le32 mcast2ucast_mode; 2403 2404 /* 2405 * how much memory to allocate for a tx PPDU dbg log 2406 * 2407 * This parameter controls how much memory the target will allocate 2408 * to store a log of tx PPDU meta-information (how large the PPDU 2409 * was, when it was sent, whether it was successful, etc.) 2410 */ 2411 __le32 tx_dbg_log_size; 2412 2413 /* how many AST entries to be allocated for WDS */ 2414 __le32 num_wds_entries; 2415 2416 /* 2417 * MAC DMA burst size, e.g., For target PCI limit can be 2418 * 0 -default, 1 256B 2419 */ 2420 __le32 dma_burst_size; 2421 2422 /* 2423 * Fixed delimiters to be inserted after every MPDU to 2424 * account for interface latency to avoid underrun. 2425 */ 2426 __le32 mac_aggr_delim; 2427 2428 /* 2429 * determine whether target is responsible for detecting duplicate 2430 * non-aggregate MPDU and timing out stale fragments. 2431 * 2432 * A-MPDU reordering is always performed on the target. 2433 * 2434 * 0: target responsible for frag timeout and dup checking 2435 * 1: host responsible for frag timeout and dup checking 2436 */ 2437 __le32 rx_skip_defrag_timeout_dup_detection_check; 2438 2439 /* 2440 * Configuration for VoW : 2441 * No of Video Nodes to be supported 2442 * and Max no of descriptors for each Video link (node). 2443 */ 2444 __le32 vow_config; 2445 2446 /* Number of msdu descriptors target should use */ 2447 __le32 num_msdu_desc; 2448 2449 /* 2450 * Max. number of Tx fragments per MSDU 2451 * This parameter controls the max number of Tx fragments per MSDU. 2452 * This is sent by the target as part of the WMI_SERVICE_READY event 2453 * and is overridden by the OS shim as required. 2454 */ 2455 __le32 max_frag_entries; 2456 } __packed; 2457 2458 enum wmi_10_2_feature_mask { 2459 WMI_10_2_RX_BATCH_MODE = BIT(0), 2460 WMI_10_2_ATF_CONFIG = BIT(1), 2461 WMI_10_2_COEX_GPIO = BIT(3), 2462 WMI_10_2_BSS_CHAN_INFO = BIT(6), 2463 WMI_10_2_PEER_STATS = BIT(7), 2464 }; 2465 2466 struct wmi_resource_config_10_2 { 2467 struct wmi_resource_config_10x common; 2468 __le32 max_peer_ext_stats; 2469 __le32 smart_ant_cap; /* 0-disable, 1-enable */ 2470 __le32 bk_min_free; 2471 __le32 be_min_free; 2472 __le32 vi_min_free; 2473 __le32 vo_min_free; 2474 __le32 feature_mask; 2475 } __packed; 2476 2477 #define NUM_UNITS_IS_NUM_VDEVS BIT(0) 2478 #define NUM_UNITS_IS_NUM_PEERS BIT(1) 2479 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2) 2480 2481 struct wmi_resource_config_10_4 { 2482 /* Number of virtual devices (VAPs) to support */ 2483 __le32 num_vdevs; 2484 2485 /* Number of peer nodes to support */ 2486 __le32 num_peers; 2487 2488 /* Number of active peer nodes to support */ 2489 __le32 num_active_peers; 2490 2491 /* In offload mode, target supports features like WOW, chatter and other 2492 * protocol offloads. In order to support them some functionalities like 2493 * reorder buffering, PN checking need to be done in target. 2494 * This determines maximum number of peers supported by target in 2495 * offload mode. 2496 */ 2497 __le32 num_offload_peers; 2498 2499 /* Number of reorder buffers available for doing target based reorder 2500 * Rx reorder buffering 2501 */ 2502 __le32 num_offload_reorder_buffs; 2503 2504 /* Number of keys per peer */ 2505 __le32 num_peer_keys; 2506 2507 /* Total number of TX/RX data TIDs */ 2508 __le32 num_tids; 2509 2510 /* Max skid for resolving hash collisions. 2511 * The address search table is sparse, so that if two MAC addresses 2512 * result in the same hash value, the second of these conflicting 2513 * entries can slide to the next index in the address search table, 2514 * and use it, if it is unoccupied. This ast_skid_limit parameter 2515 * specifies the upper bound on how many subsequent indices to search 2516 * over to find an unoccupied space. 2517 */ 2518 __le32 ast_skid_limit; 2519 2520 /* The nominal chain mask for transmit. 2521 * The chain mask may be modified dynamically, e.g. to operate AP tx 2522 * with a reduced number of chains if no clients are associated. 2523 * This configuration parameter specifies the nominal chain-mask that 2524 * should be used when not operating with a reduced set of tx chains. 2525 */ 2526 __le32 tx_chain_mask; 2527 2528 /* The nominal chain mask for receive. 2529 * The chain mask may be modified dynamically, e.g. for a client to use 2530 * a reduced number of chains for receive if the traffic to the client 2531 * is low enough that it doesn't require downlink MIMO or antenna 2532 * diversity. This configuration parameter specifies the nominal 2533 * chain-mask that should be used when not operating with a reduced 2534 * set of rx chains. 2535 */ 2536 __le32 rx_chain_mask; 2537 2538 /* What rx reorder timeout (ms) to use for the AC. 2539 * Each WMM access class (voice, video, best-effort, background) will 2540 * have its own timeout value to dictate how long to wait for missing 2541 * rx MPDUs to arrive before flushing subsequent MPDUs that have already 2542 * been received. This parameter specifies the timeout in milliseconds 2543 * for each class. 2544 */ 2545 __le32 rx_timeout_pri[4]; 2546 2547 /* What mode the rx should decap packets to. 2548 * MAC can decap to RAW (no decap), native wifi or Ethernet types. 2549 * This setting also determines the default TX behavior, however TX 2550 * behavior can be modified on a per VAP basis during VAP init 2551 */ 2552 __le32 rx_decap_mode; 2553 2554 __le32 scan_max_pending_req; 2555 2556 __le32 bmiss_offload_max_vdev; 2557 2558 __le32 roam_offload_max_vdev; 2559 2560 __le32 roam_offload_max_ap_profiles; 2561 2562 /* How many groups to use for mcast->ucast conversion. 2563 * The target's WAL maintains a table to hold information regarding 2564 * which peers belong to a given multicast group, so that if 2565 * multicast->unicast conversion is enabled, the target can convert 2566 * multicast tx frames to a series of unicast tx frames, to each peer 2567 * within the multicast group. This num_mcast_groups configuration 2568 * parameter tells the target how many multicast groups to provide 2569 * storage for within its multicast group membership table. 2570 */ 2571 __le32 num_mcast_groups; 2572 2573 /* Size to alloc for the mcast membership table. 2574 * This num_mcast_table_elems configuration parameter tells the target 2575 * how many peer elements it needs to provide storage for in its 2576 * multicast group membership table. These multicast group membership 2577 * table elements are shared by the multicast groups stored within 2578 * the table. 2579 */ 2580 __le32 num_mcast_table_elems; 2581 2582 /* Whether/how to do multicast->unicast conversion. 2583 * This configuration parameter specifies whether the target should 2584 * perform multicast --> unicast conversion on transmit, and if so, 2585 * what to do if it finds no entries in its multicast group membership 2586 * table for the multicast IP address in the tx frame. 2587 * Configuration value: 2588 * 0 -> Do not perform multicast to unicast conversion. 2589 * 1 -> Convert multicast frames to unicast, if the IP multicast address 2590 * from the tx frame is found in the multicast group membership 2591 * table. If the IP multicast address is not found, drop the frame 2592 * 2 -> Convert multicast frames to unicast, if the IP multicast address 2593 * from the tx frame is found in the multicast group membership 2594 * table. If the IP multicast address is not found, transmit the 2595 * frame as multicast. 2596 */ 2597 __le32 mcast2ucast_mode; 2598 2599 /* How much memory to allocate for a tx PPDU dbg log. 2600 * This parameter controls how much memory the target will allocate to 2601 * store a log of tx PPDU meta-information (how large the PPDU was, 2602 * when it was sent, whether it was successful, etc.) 2603 */ 2604 __le32 tx_dbg_log_size; 2605 2606 /* How many AST entries to be allocated for WDS */ 2607 __le32 num_wds_entries; 2608 2609 /* MAC DMA burst size. 0 -default, 1 -256B */ 2610 __le32 dma_burst_size; 2611 2612 /* Fixed delimiters to be inserted after every MPDU to account for 2613 * interface latency to avoid underrun. 2614 */ 2615 __le32 mac_aggr_delim; 2616 2617 /* Determine whether target is responsible for detecting duplicate 2618 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering 2619 * is always performed on the target. 2620 * 2621 * 0: target responsible for frag timeout and dup checking 2622 * 1: host responsible for frag timeout and dup checking 2623 */ 2624 __le32 rx_skip_defrag_timeout_dup_detection_check; 2625 2626 /* Configuration for VoW : No of Video nodes to be supported and max 2627 * no of descriptors for each video link (node). 2628 */ 2629 __le32 vow_config; 2630 2631 /* Maximum vdev that could use gtk offload */ 2632 __le32 gtk_offload_max_vdev; 2633 2634 /* Number of msdu descriptors target should use */ 2635 __le32 num_msdu_desc; 2636 2637 /* Max number of tx fragments per MSDU. 2638 * This parameter controls the max number of tx fragments per MSDU. 2639 * This will passed by target as part of the WMI_SERVICE_READY event 2640 * and is overridden by the OS shim as required. 2641 */ 2642 __le32 max_frag_entries; 2643 2644 /* Max number of extended peer stats. 2645 * This parameter controls the max number of peers for which extended 2646 * statistics are supported by target 2647 */ 2648 __le32 max_peer_ext_stats; 2649 2650 /* Smart antenna capabilities information. 2651 * 1 - Smart antenna is enabled 2652 * 0 - Smart antenna is disabled 2653 * In future this can contain smart antenna specific capabilities. 2654 */ 2655 __le32 smart_ant_cap; 2656 2657 /* User can configure the buffers allocated for each AC (BE, BK, VI, VO) 2658 * during init. 2659 */ 2660 __le32 bk_minfree; 2661 __le32 be_minfree; 2662 __le32 vi_minfree; 2663 __le32 vo_minfree; 2664 2665 /* Rx batch mode capability. 2666 * 1 - Rx batch mode enabled 2667 * 0 - Rx batch mode disabled 2668 */ 2669 __le32 rx_batchmode; 2670 2671 /* Thermal throttling capability. 2672 * 1 - Capable of thermal throttling 2673 * 0 - Not capable of thermal throttling 2674 */ 2675 __le32 tt_support; 2676 2677 /* ATF configuration. 2678 * 1 - Enable ATF 2679 * 0 - Disable ATF 2680 */ 2681 __le32 atf_config; 2682 2683 /* Configure padding to manage IP header un-alignment 2684 * 1 - Enable padding 2685 * 0 - Disable padding 2686 */ 2687 __le32 iphdr_pad_config; 2688 2689 /* qwrap configuration (bits 15-0) 2690 * 1 - This is qwrap configuration 2691 * 0 - This is not qwrap 2692 * 2693 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables) 2694 * In order to get ack-RSSI reporting and to specify the tx-rate for 2695 * individual frames, this option must be enabled. This uses an extra 2696 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it. 2697 */ 2698 __le32 qwrap_config; 2699 } __packed; 2700 2701 /** 2702 * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags 2703 * @WMI_10_4_LTEU_SUPPORT: LTEU config 2704 * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config 2705 * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan 2706 * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan 2707 * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats 2708 * @WMI_10_4_PEER_STATS: Per station stats 2709 */ 2710 enum wmi_10_4_feature_mask { 2711 WMI_10_4_LTEU_SUPPORT = BIT(0), 2712 WMI_10_4_COEX_GPIO_SUPPORT = BIT(1), 2713 WMI_10_4_AUX_RADIO_SPECTRAL_INTF = BIT(2), 2714 WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF = BIT(3), 2715 WMI_10_4_BSS_CHANNEL_INFO_64 = BIT(4), 2716 WMI_10_4_PEER_STATS = BIT(5), 2717 }; 2718 2719 struct wmi_ext_resource_config_10_4_cmd { 2720 /* contains enum wmi_host_platform_type */ 2721 __le32 host_platform_config; 2722 /* see enum wmi_10_4_feature_mask */ 2723 __le32 fw_feature_bitmap; 2724 }; 2725 2726 /* strucutre describing host memory chunk. */ 2727 struct host_memory_chunk { 2728 /* id of the request that is passed up in service ready */ 2729 __le32 req_id; 2730 /* the physical address the memory chunk */ 2731 __le32 ptr; 2732 /* size of the chunk */ 2733 __le32 size; 2734 } __packed; 2735 2736 struct wmi_host_mem_chunks { 2737 __le32 count; 2738 /* some fw revisions require at least 1 chunk regardless of count */ 2739 struct host_memory_chunk items[1]; 2740 } __packed; 2741 2742 struct wmi_init_cmd { 2743 struct wmi_resource_config resource_config; 2744 struct wmi_host_mem_chunks mem_chunks; 2745 } __packed; 2746 2747 /* _10x structure is from 10.X FW API */ 2748 struct wmi_init_cmd_10x { 2749 struct wmi_resource_config_10x resource_config; 2750 struct wmi_host_mem_chunks mem_chunks; 2751 } __packed; 2752 2753 struct wmi_init_cmd_10_2 { 2754 struct wmi_resource_config_10_2 resource_config; 2755 struct wmi_host_mem_chunks mem_chunks; 2756 } __packed; 2757 2758 struct wmi_init_cmd_10_4 { 2759 struct wmi_resource_config_10_4 resource_config; 2760 struct wmi_host_mem_chunks mem_chunks; 2761 } __packed; 2762 2763 struct wmi_chan_list_entry { 2764 __le16 freq; 2765 u8 phy_mode; /* valid for 10.2 only */ 2766 u8 reserved; 2767 } __packed; 2768 2769 /* TLV for channel list */ 2770 struct wmi_chan_list { 2771 __le32 tag; /* WMI_CHAN_LIST_TAG */ 2772 __le32 num_chan; 2773 struct wmi_chan_list_entry channel_list[0]; 2774 } __packed; 2775 2776 struct wmi_bssid_list { 2777 __le32 tag; /* WMI_BSSID_LIST_TAG */ 2778 __le32 num_bssid; 2779 struct wmi_mac_addr bssid_list[0]; 2780 } __packed; 2781 2782 struct wmi_ie_data { 2783 __le32 tag; /* WMI_IE_TAG */ 2784 __le32 ie_len; 2785 u8 ie_data[0]; 2786 } __packed; 2787 2788 struct wmi_ssid { 2789 __le32 ssid_len; 2790 u8 ssid[32]; 2791 } __packed; 2792 2793 struct wmi_ssid_list { 2794 __le32 tag; /* WMI_SSID_LIST_TAG */ 2795 __le32 num_ssids; 2796 struct wmi_ssid ssids[0]; 2797 } __packed; 2798 2799 /* prefix used by scan requestor ids on the host */ 2800 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000 2801 2802 /* prefix used by scan request ids generated on the host */ 2803 /* host cycles through the lower 12 bits to generate ids */ 2804 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000 2805 2806 #define WLAN_SCAN_PARAMS_MAX_SSID 16 2807 #define WLAN_SCAN_PARAMS_MAX_BSSID 4 2808 #define WLAN_SCAN_PARAMS_MAX_IE_LEN 256 2809 2810 /* Values lower than this may be refused by some firmware revisions with a scan 2811 * completion with a timedout reason. 2812 */ 2813 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40 2814 2815 /* Scan priority numbers must be sequential, starting with 0 */ 2816 enum wmi_scan_priority { 2817 WMI_SCAN_PRIORITY_VERY_LOW = 0, 2818 WMI_SCAN_PRIORITY_LOW, 2819 WMI_SCAN_PRIORITY_MEDIUM, 2820 WMI_SCAN_PRIORITY_HIGH, 2821 WMI_SCAN_PRIORITY_VERY_HIGH, 2822 WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */ 2823 }; 2824 2825 struct wmi_start_scan_common { 2826 /* Scan ID */ 2827 __le32 scan_id; 2828 /* Scan requestor ID */ 2829 __le32 scan_req_id; 2830 /* VDEV id(interface) that is requesting scan */ 2831 __le32 vdev_id; 2832 /* Scan Priority, input to scan scheduler */ 2833 __le32 scan_priority; 2834 /* Scan events subscription */ 2835 __le32 notify_scan_events; 2836 /* dwell time in msec on active channels */ 2837 __le32 dwell_time_active; 2838 /* dwell time in msec on passive channels */ 2839 __le32 dwell_time_passive; 2840 /* 2841 * min time in msec on the BSS channel,only valid if atleast one 2842 * VDEV is active 2843 */ 2844 __le32 min_rest_time; 2845 /* 2846 * max rest time in msec on the BSS channel,only valid if at least 2847 * one VDEV is active 2848 */ 2849 /* 2850 * the scanner will rest on the bss channel at least min_rest_time 2851 * after min_rest_time the scanner will start checking for tx/rx 2852 * activity on all VDEVs. if there is no activity the scanner will 2853 * switch to off channel. if there is activity the scanner will let 2854 * the radio on the bss channel until max_rest_time expires.at 2855 * max_rest_time scanner will switch to off channel irrespective of 2856 * activity. activity is determined by the idle_time parameter. 2857 */ 2858 __le32 max_rest_time; 2859 /* 2860 * time before sending next set of probe requests. 2861 * The scanner keeps repeating probe requests transmission with 2862 * period specified by repeat_probe_time. 2863 * The number of probe requests specified depends on the ssid_list 2864 * and bssid_list 2865 */ 2866 __le32 repeat_probe_time; 2867 /* time in msec between 2 consequetive probe requests with in a set. */ 2868 __le32 probe_spacing_time; 2869 /* 2870 * data inactivity time in msec on bss channel that will be used by 2871 * scanner for measuring the inactivity. 2872 */ 2873 __le32 idle_time; 2874 /* maximum time in msec allowed for scan */ 2875 __le32 max_scan_time; 2876 /* 2877 * delay in msec before sending first probe request after switching 2878 * to a channel 2879 */ 2880 __le32 probe_delay; 2881 /* Scan control flags */ 2882 __le32 scan_ctrl_flags; 2883 } __packed; 2884 2885 struct wmi_start_scan_tlvs { 2886 /* TLV parameters. These includes channel list, ssid list, bssid list, 2887 * extra ies. 2888 */ 2889 u8 tlvs[0]; 2890 } __packed; 2891 2892 struct wmi_start_scan_cmd { 2893 struct wmi_start_scan_common common; 2894 __le32 burst_duration_ms; 2895 struct wmi_start_scan_tlvs tlvs; 2896 } __packed; 2897 2898 /* This is the definition from 10.X firmware branch */ 2899 struct wmi_10x_start_scan_cmd { 2900 struct wmi_start_scan_common common; 2901 struct wmi_start_scan_tlvs tlvs; 2902 } __packed; 2903 2904 struct wmi_ssid_arg { 2905 int len; 2906 const u8 *ssid; 2907 }; 2908 2909 struct wmi_bssid_arg { 2910 const u8 *bssid; 2911 }; 2912 2913 struct wmi_start_scan_arg { 2914 u32 scan_id; 2915 u32 scan_req_id; 2916 u32 vdev_id; 2917 u32 scan_priority; 2918 u32 notify_scan_events; 2919 u32 dwell_time_active; 2920 u32 dwell_time_passive; 2921 u32 min_rest_time; 2922 u32 max_rest_time; 2923 u32 repeat_probe_time; 2924 u32 probe_spacing_time; 2925 u32 idle_time; 2926 u32 max_scan_time; 2927 u32 probe_delay; 2928 u32 scan_ctrl_flags; 2929 u32 burst_duration_ms; 2930 2931 u32 ie_len; 2932 u32 n_channels; 2933 u32 n_ssids; 2934 u32 n_bssids; 2935 2936 u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN]; 2937 u16 channels[64]; 2938 struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID]; 2939 struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID]; 2940 }; 2941 2942 /* scan control flags */ 2943 2944 /* passively scan all channels including active channels */ 2945 #define WMI_SCAN_FLAG_PASSIVE 0x1 2946 /* add wild card ssid probe request even though ssid_list is specified. */ 2947 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2 2948 /* add cck rates to rates/xrate ie for the generated probe request */ 2949 #define WMI_SCAN_ADD_CCK_RATES 0x4 2950 /* add ofdm rates to rates/xrate ie for the generated probe request */ 2951 #define WMI_SCAN_ADD_OFDM_RATES 0x8 2952 /* To enable indication of Chan load and Noise floor to host */ 2953 #define WMI_SCAN_CHAN_STAT_EVENT 0x10 2954 /* Filter Probe request frames */ 2955 #define WMI_SCAN_FILTER_PROBE_REQ 0x20 2956 /* When set, DFS channels will not be scanned */ 2957 #define WMI_SCAN_BYPASS_DFS_CHN 0x40 2958 /* Different FW scan engine may choose to bail out on errors. 2959 * Allow the driver to have influence over that. */ 2960 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80 2961 2962 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */ 2963 #define WMI_SCAN_CLASS_MASK 0xFF000000 2964 2965 enum wmi_stop_scan_type { 2966 WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */ 2967 WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */ 2968 WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */ 2969 }; 2970 2971 struct wmi_stop_scan_cmd { 2972 __le32 scan_req_id; 2973 __le32 scan_id; 2974 __le32 req_type; 2975 __le32 vdev_id; 2976 } __packed; 2977 2978 struct wmi_stop_scan_arg { 2979 u32 req_id; 2980 enum wmi_stop_scan_type req_type; 2981 union { 2982 u32 scan_id; 2983 u32 vdev_id; 2984 } u; 2985 }; 2986 2987 struct wmi_scan_chan_list_cmd { 2988 __le32 num_scan_chans; 2989 struct wmi_channel chan_info[0]; 2990 } __packed; 2991 2992 struct wmi_scan_chan_list_arg { 2993 u32 n_channels; 2994 struct wmi_channel_arg *channels; 2995 }; 2996 2997 enum wmi_bss_filter { 2998 WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */ 2999 WMI_BSS_FILTER_ALL, /* all beacons forwarded */ 3000 WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */ 3001 WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */ 3002 WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */ 3003 WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */ 3004 WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */ 3005 WMI_BSS_FILTER_LAST_BSS, /* marker only */ 3006 }; 3007 3008 enum wmi_scan_event_type { 3009 WMI_SCAN_EVENT_STARTED = BIT(0), 3010 WMI_SCAN_EVENT_COMPLETED = BIT(1), 3011 WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2), 3012 WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3), 3013 WMI_SCAN_EVENT_DEQUEUED = BIT(4), 3014 /* possibly by high-prio scan */ 3015 WMI_SCAN_EVENT_PREEMPTED = BIT(5), 3016 WMI_SCAN_EVENT_START_FAILED = BIT(6), 3017 WMI_SCAN_EVENT_RESTARTED = BIT(7), 3018 WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8), 3019 WMI_SCAN_EVENT_MAX = BIT(15), 3020 }; 3021 3022 enum wmi_scan_completion_reason { 3023 WMI_SCAN_REASON_COMPLETED, 3024 WMI_SCAN_REASON_CANCELLED, 3025 WMI_SCAN_REASON_PREEMPTED, 3026 WMI_SCAN_REASON_TIMEDOUT, 3027 WMI_SCAN_REASON_INTERNAL_FAILURE, 3028 WMI_SCAN_REASON_MAX, 3029 }; 3030 3031 struct wmi_scan_event { 3032 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 3033 __le32 reason; /* %WMI_SCAN_REASON_ */ 3034 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 3035 __le32 scan_req_id; 3036 __le32 scan_id; 3037 __le32 vdev_id; 3038 } __packed; 3039 3040 /* 3041 * This defines how much headroom is kept in the 3042 * receive frame between the descriptor and the 3043 * payload, in order for the WMI PHY error and 3044 * management handler to insert header contents. 3045 * 3046 * This is in bytes. 3047 */ 3048 #define WMI_MGMT_RX_HDR_HEADROOM 52 3049 3050 /* 3051 * This event will be used for sending scan results 3052 * as well as rx mgmt frames to the host. The rx buffer 3053 * will be sent as part of this WMI event. It would be a 3054 * good idea to pass all the fields in the RX status 3055 * descriptor up to the host. 3056 */ 3057 struct wmi_mgmt_rx_hdr_v1 { 3058 __le32 channel; 3059 __le32 snr; 3060 __le32 rate; 3061 __le32 phy_mode; 3062 __le32 buf_len; 3063 __le32 status; /* %WMI_RX_STATUS_ */ 3064 } __packed; 3065 3066 struct wmi_mgmt_rx_hdr_v2 { 3067 struct wmi_mgmt_rx_hdr_v1 v1; 3068 __le32 rssi_ctl[4]; 3069 } __packed; 3070 3071 struct wmi_mgmt_rx_event_v1 { 3072 struct wmi_mgmt_rx_hdr_v1 hdr; 3073 u8 buf[0]; 3074 } __packed; 3075 3076 struct wmi_mgmt_rx_event_v2 { 3077 struct wmi_mgmt_rx_hdr_v2 hdr; 3078 u8 buf[0]; 3079 } __packed; 3080 3081 struct wmi_10_4_mgmt_rx_hdr { 3082 __le32 channel; 3083 __le32 snr; 3084 u8 rssi_ctl[4]; 3085 __le32 rate; 3086 __le32 phy_mode; 3087 __le32 buf_len; 3088 __le32 status; 3089 } __packed; 3090 3091 struct wmi_10_4_mgmt_rx_event { 3092 struct wmi_10_4_mgmt_rx_hdr hdr; 3093 u8 buf[0]; 3094 } __packed; 3095 3096 struct wmi_mgmt_rx_ext_info { 3097 __le64 rx_mac_timestamp; 3098 } __packed __aligned(4); 3099 3100 #define WMI_RX_STATUS_OK 0x00 3101 #define WMI_RX_STATUS_ERR_CRC 0x01 3102 #define WMI_RX_STATUS_ERR_DECRYPT 0x08 3103 #define WMI_RX_STATUS_ERR_MIC 0x10 3104 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20 3105 /* Extension data at the end of mgmt frame */ 3106 #define WMI_RX_STATUS_EXT_INFO 0x40 3107 3108 #define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26 3109 #define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24 3110 #define PHY_ERROR_GEN_RADAR 0x05 3111 3112 #define PHY_ERROR_10_4_RADAR_MASK 0x4 3113 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000 3114 3115 enum phy_err_type { 3116 PHY_ERROR_UNKNOWN, 3117 PHY_ERROR_SPECTRAL_SCAN, 3118 PHY_ERROR_FALSE_RADAR_EXT, 3119 PHY_ERROR_RADAR 3120 }; 3121 3122 struct wmi_phyerr { 3123 __le32 tsf_timestamp; 3124 __le16 freq1; 3125 __le16 freq2; 3126 u8 rssi_combined; 3127 u8 chan_width_mhz; 3128 u8 phy_err_code; 3129 u8 rsvd0; 3130 __le32 rssi_chains[4]; 3131 __le16 nf_chains[4]; 3132 __le32 buf_len; 3133 u8 buf[0]; 3134 } __packed; 3135 3136 struct wmi_phyerr_event { 3137 __le32 num_phyerrs; 3138 __le32 tsf_l32; 3139 __le32 tsf_u32; 3140 struct wmi_phyerr phyerrs[0]; 3141 } __packed; 3142 3143 struct wmi_10_4_phyerr_event { 3144 __le32 tsf_l32; 3145 __le32 tsf_u32; 3146 __le16 freq1; 3147 __le16 freq2; 3148 u8 rssi_combined; 3149 u8 chan_width_mhz; 3150 u8 phy_err_code; 3151 u8 rsvd0; 3152 __le32 rssi_chains[4]; 3153 __le16 nf_chains[4]; 3154 __le32 phy_err_mask[2]; 3155 __le32 tsf_timestamp; 3156 __le32 buf_len; 3157 u8 buf[0]; 3158 } __packed; 3159 3160 #define PHYERR_TLV_SIG 0xBB 3161 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB 3162 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8 3163 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9 3164 3165 struct phyerr_radar_report { 3166 __le32 reg0; /* RADAR_REPORT_REG0_* */ 3167 __le32 reg1; /* REDAR_REPORT_REG1_* */ 3168 } __packed; 3169 3170 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000 3171 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31 3172 3173 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000 3174 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30 3175 3176 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000 3177 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20 3178 3179 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000 3180 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16 3181 3182 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00 3183 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10 3184 3185 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF 3186 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0 3187 3188 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000 3189 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31 3190 3191 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000 3192 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24 3193 3194 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000 3195 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16 3196 3197 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00 3198 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8 3199 3200 #define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF 3201 #define RADAR_REPORT_REG1_PULSE_DUR_LSB 0 3202 3203 struct phyerr_fft_report { 3204 __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */ 3205 __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */ 3206 } __packed; 3207 3208 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000 3209 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23 3210 3211 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000 3212 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14 3213 3214 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000 3215 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12 3216 3217 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF 3218 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0 3219 3220 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000 3221 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26 3222 3223 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000 3224 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18 3225 3226 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00 3227 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8 3228 3229 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF 3230 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0 3231 3232 struct phyerr_tlv { 3233 __le16 len; 3234 u8 tag; 3235 u8 sig; 3236 } __packed; 3237 3238 #define DFS_RSSI_POSSIBLY_FALSE 50 3239 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40 3240 3241 struct wmi_mgmt_tx_hdr { 3242 __le32 vdev_id; 3243 struct wmi_mac_addr peer_macaddr; 3244 __le32 tx_rate; 3245 __le32 tx_power; 3246 __le32 buf_len; 3247 } __packed; 3248 3249 struct wmi_mgmt_tx_cmd { 3250 struct wmi_mgmt_tx_hdr hdr; 3251 u8 buf[0]; 3252 } __packed; 3253 3254 struct wmi_echo_event { 3255 __le32 value; 3256 } __packed; 3257 3258 struct wmi_echo_cmd { 3259 __le32 value; 3260 } __packed; 3261 3262 struct wmi_pdev_set_regdomain_cmd { 3263 __le32 reg_domain; 3264 __le32 reg_domain_2G; 3265 __le32 reg_domain_5G; 3266 __le32 conformance_test_limit_2G; 3267 __le32 conformance_test_limit_5G; 3268 } __packed; 3269 3270 enum wmi_dfs_region { 3271 /* Uninitialized dfs domain */ 3272 WMI_UNINIT_DFS_DOMAIN = 0, 3273 3274 /* FCC3 dfs domain */ 3275 WMI_FCC_DFS_DOMAIN = 1, 3276 3277 /* ETSI dfs domain */ 3278 WMI_ETSI_DFS_DOMAIN = 2, 3279 3280 /*Japan dfs domain */ 3281 WMI_MKK4_DFS_DOMAIN = 3, 3282 }; 3283 3284 struct wmi_pdev_set_regdomain_cmd_10x { 3285 __le32 reg_domain; 3286 __le32 reg_domain_2G; 3287 __le32 reg_domain_5G; 3288 __le32 conformance_test_limit_2G; 3289 __le32 conformance_test_limit_5G; 3290 3291 /* dfs domain from wmi_dfs_region */ 3292 __le32 dfs_domain; 3293 } __packed; 3294 3295 /* Command to set/unset chip in quiet mode */ 3296 struct wmi_pdev_set_quiet_cmd { 3297 /* period in TUs */ 3298 __le32 period; 3299 3300 /* duration in TUs */ 3301 __le32 duration; 3302 3303 /* offset in TUs */ 3304 __le32 next_start; 3305 3306 /* enable/disable */ 3307 __le32 enabled; 3308 } __packed; 3309 3310 /* 3311 * 802.11g protection mode. 3312 */ 3313 enum ath10k_protmode { 3314 ATH10K_PROT_NONE = 0, /* no protection */ 3315 ATH10K_PROT_CTSONLY = 1, /* CTS to self */ 3316 ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */ 3317 }; 3318 3319 enum wmi_rtscts_profile { 3320 WMI_RTSCTS_FOR_NO_RATESERIES = 0, 3321 WMI_RTSCTS_FOR_SECOND_RATESERIES, 3322 WMI_RTSCTS_ACROSS_SW_RETRIES 3323 }; 3324 3325 #define WMI_RTSCTS_ENABLED 1 3326 #define WMI_RTSCTS_SET_MASK 0x0f 3327 #define WMI_RTSCTS_SET_LSB 0 3328 3329 #define WMI_RTSCTS_PROFILE_MASK 0xf0 3330 #define WMI_RTSCTS_PROFILE_LSB 4 3331 3332 enum wmi_beacon_gen_mode { 3333 WMI_BEACON_STAGGERED_MODE = 0, 3334 WMI_BEACON_BURST_MODE = 1 3335 }; 3336 3337 enum wmi_csa_event_ies_present_flag { 3338 WMI_CSA_IE_PRESENT = 0x00000001, 3339 WMI_XCSA_IE_PRESENT = 0x00000002, 3340 WMI_WBW_IE_PRESENT = 0x00000004, 3341 WMI_CSWARP_IE_PRESENT = 0x00000008, 3342 }; 3343 3344 /* wmi CSA receive event from beacon frame */ 3345 struct wmi_csa_event { 3346 __le32 i_fc_dur; 3347 /* Bit 0-15: FC */ 3348 /* Bit 16-31: DUR */ 3349 struct wmi_mac_addr i_addr1; 3350 struct wmi_mac_addr i_addr2; 3351 __le32 csa_ie[2]; 3352 __le32 xcsa_ie[2]; 3353 __le32 wb_ie[2]; 3354 __le32 cswarp_ie; 3355 __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */ 3356 } __packed; 3357 3358 /* the definition of different PDEV parameters */ 3359 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3360 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3361 #define PEER_DEFAULT_STATS_UPDATE_PERIOD 500 3362 3363 struct wmi_pdev_param_map { 3364 u32 tx_chain_mask; 3365 u32 rx_chain_mask; 3366 u32 txpower_limit2g; 3367 u32 txpower_limit5g; 3368 u32 txpower_scale; 3369 u32 beacon_gen_mode; 3370 u32 beacon_tx_mode; 3371 u32 resmgr_offchan_mode; 3372 u32 protection_mode; 3373 u32 dynamic_bw; 3374 u32 non_agg_sw_retry_th; 3375 u32 agg_sw_retry_th; 3376 u32 sta_kickout_th; 3377 u32 ac_aggrsize_scaling; 3378 u32 ltr_enable; 3379 u32 ltr_ac_latency_be; 3380 u32 ltr_ac_latency_bk; 3381 u32 ltr_ac_latency_vi; 3382 u32 ltr_ac_latency_vo; 3383 u32 ltr_ac_latency_timeout; 3384 u32 ltr_sleep_override; 3385 u32 ltr_rx_override; 3386 u32 ltr_tx_activity_timeout; 3387 u32 l1ss_enable; 3388 u32 dsleep_enable; 3389 u32 pcielp_txbuf_flush; 3390 u32 pcielp_txbuf_watermark; 3391 u32 pcielp_txbuf_tmo_en; 3392 u32 pcielp_txbuf_tmo_value; 3393 u32 pdev_stats_update_period; 3394 u32 vdev_stats_update_period; 3395 u32 peer_stats_update_period; 3396 u32 bcnflt_stats_update_period; 3397 u32 pmf_qos; 3398 u32 arp_ac_override; 3399 u32 dcs; 3400 u32 ani_enable; 3401 u32 ani_poll_period; 3402 u32 ani_listen_period; 3403 u32 ani_ofdm_level; 3404 u32 ani_cck_level; 3405 u32 dyntxchain; 3406 u32 proxy_sta; 3407 u32 idle_ps_config; 3408 u32 power_gating_sleep; 3409 u32 fast_channel_reset; 3410 u32 burst_dur; 3411 u32 burst_enable; 3412 u32 cal_period; 3413 u32 aggr_burst; 3414 u32 rx_decap_mode; 3415 u32 smart_antenna_default_antenna; 3416 u32 igmpmld_override; 3417 u32 igmpmld_tid; 3418 u32 antenna_gain; 3419 u32 rx_filter; 3420 u32 set_mcast_to_ucast_tid; 3421 u32 proxy_sta_mode; 3422 u32 set_mcast2ucast_mode; 3423 u32 set_mcast2ucast_buffer; 3424 u32 remove_mcast2ucast_buffer; 3425 u32 peer_sta_ps_statechg_enable; 3426 u32 igmpmld_ac_override; 3427 u32 block_interbss; 3428 u32 set_disable_reset_cmdid; 3429 u32 set_msdu_ttl_cmdid; 3430 u32 set_ppdu_duration_cmdid; 3431 u32 txbf_sound_period_cmdid; 3432 u32 set_promisc_mode_cmdid; 3433 u32 set_burst_mode_cmdid; 3434 u32 en_stats; 3435 u32 mu_group_policy; 3436 u32 noise_detection; 3437 u32 noise_threshold; 3438 u32 dpd_enable; 3439 u32 set_mcast_bcast_echo; 3440 u32 atf_strict_sch; 3441 u32 atf_sched_duration; 3442 u32 ant_plzn; 3443 u32 mgmt_retry_limit; 3444 u32 sensitivity_level; 3445 u32 signed_txpower_2g; 3446 u32 signed_txpower_5g; 3447 u32 enable_per_tid_amsdu; 3448 u32 enable_per_tid_ampdu; 3449 u32 cca_threshold; 3450 u32 rts_fixed_rate; 3451 u32 pdev_reset; 3452 u32 wapi_mbssid_offset; 3453 u32 arp_srcaddr; 3454 u32 arp_dstaddr; 3455 u32 enable_btcoex; 3456 }; 3457 3458 #define WMI_PDEV_PARAM_UNSUPPORTED 0 3459 3460 enum wmi_pdev_param { 3461 /* TX chain mask */ 3462 WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3463 /* RX chain mask */ 3464 WMI_PDEV_PARAM_RX_CHAIN_MASK, 3465 /* TX power limit for 2G Radio */ 3466 WMI_PDEV_PARAM_TXPOWER_LIMIT2G, 3467 /* TX power limit for 5G Radio */ 3468 WMI_PDEV_PARAM_TXPOWER_LIMIT5G, 3469 /* TX power scale */ 3470 WMI_PDEV_PARAM_TXPOWER_SCALE, 3471 /* Beacon generation mode . 0: host, 1: target */ 3472 WMI_PDEV_PARAM_BEACON_GEN_MODE, 3473 /* Beacon generation mode . 0: staggered 1: bursted */ 3474 WMI_PDEV_PARAM_BEACON_TX_MODE, 3475 /* 3476 * Resource manager off chan mode . 3477 * 0: turn off off chan mode. 1: turn on offchan mode 3478 */ 3479 WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3480 /* 3481 * Protection mode: 3482 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3483 */ 3484 WMI_PDEV_PARAM_PROTECTION_MODE, 3485 /* 3486 * Dynamic bandwidth - 0: disable, 1: enable 3487 * 3488 * When enabled HW rate control tries different bandwidths when 3489 * retransmitting frames. 3490 */ 3491 WMI_PDEV_PARAM_DYNAMIC_BW, 3492 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3493 WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3494 /* aggregrate sw retry threshold. 0-disable*/ 3495 WMI_PDEV_PARAM_AGG_SW_RETRY_TH, 3496 /* Station kickout threshold (non of consecutive failures).0-disable */ 3497 WMI_PDEV_PARAM_STA_KICKOUT_TH, 3498 /* Aggerate size scaling configuration per AC */ 3499 WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3500 /* LTR enable */ 3501 WMI_PDEV_PARAM_LTR_ENABLE, 3502 /* LTR latency for BE, in us */ 3503 WMI_PDEV_PARAM_LTR_AC_LATENCY_BE, 3504 /* LTR latency for BK, in us */ 3505 WMI_PDEV_PARAM_LTR_AC_LATENCY_BK, 3506 /* LTR latency for VI, in us */ 3507 WMI_PDEV_PARAM_LTR_AC_LATENCY_VI, 3508 /* LTR latency for VO, in us */ 3509 WMI_PDEV_PARAM_LTR_AC_LATENCY_VO, 3510 /* LTR AC latency timeout, in ms */ 3511 WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3512 /* LTR platform latency override, in us */ 3513 WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3514 /* LTR-RX override, in us */ 3515 WMI_PDEV_PARAM_LTR_RX_OVERRIDE, 3516 /* Tx activity timeout for LTR, in us */ 3517 WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3518 /* L1SS state machine enable */ 3519 WMI_PDEV_PARAM_L1SS_ENABLE, 3520 /* Deep sleep state machine enable */ 3521 WMI_PDEV_PARAM_DSLEEP_ENABLE, 3522 /* RX buffering flush enable */ 3523 WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3524 /* RX buffering matermark */ 3525 WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3526 /* RX buffering timeout enable */ 3527 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3528 /* RX buffering timeout value */ 3529 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3530 /* pdev level stats update period in ms */ 3531 WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3532 /* vdev level stats update period in ms */ 3533 WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3534 /* peer level stats update period in ms */ 3535 WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3536 /* beacon filter status update period */ 3537 WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3538 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3539 WMI_PDEV_PARAM_PMF_QOS, 3540 /* Access category on which ARP frames are sent */ 3541 WMI_PDEV_PARAM_ARP_AC_OVERRIDE, 3542 /* DCS configuration */ 3543 WMI_PDEV_PARAM_DCS, 3544 /* Enable/Disable ANI on target */ 3545 WMI_PDEV_PARAM_ANI_ENABLE, 3546 /* configure the ANI polling period */ 3547 WMI_PDEV_PARAM_ANI_POLL_PERIOD, 3548 /* configure the ANI listening period */ 3549 WMI_PDEV_PARAM_ANI_LISTEN_PERIOD, 3550 /* configure OFDM immunity level */ 3551 WMI_PDEV_PARAM_ANI_OFDM_LEVEL, 3552 /* configure CCK immunity level */ 3553 WMI_PDEV_PARAM_ANI_CCK_LEVEL, 3554 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3555 WMI_PDEV_PARAM_DYNTXCHAIN, 3556 /* Enable/Disable proxy STA */ 3557 WMI_PDEV_PARAM_PROXY_STA, 3558 /* Enable/Disable low power state when all VDEVs are inactive/idle. */ 3559 WMI_PDEV_PARAM_IDLE_PS_CONFIG, 3560 /* Enable/Disable power gating sleep */ 3561 WMI_PDEV_PARAM_POWER_GATING_SLEEP, 3562 }; 3563 3564 enum wmi_10x_pdev_param { 3565 /* TX chian mask */ 3566 WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3567 /* RX chian mask */ 3568 WMI_10X_PDEV_PARAM_RX_CHAIN_MASK, 3569 /* TX power limit for 2G Radio */ 3570 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G, 3571 /* TX power limit for 5G Radio */ 3572 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G, 3573 /* TX power scale */ 3574 WMI_10X_PDEV_PARAM_TXPOWER_SCALE, 3575 /* Beacon generation mode . 0: host, 1: target */ 3576 WMI_10X_PDEV_PARAM_BEACON_GEN_MODE, 3577 /* Beacon generation mode . 0: staggered 1: bursted */ 3578 WMI_10X_PDEV_PARAM_BEACON_TX_MODE, 3579 /* 3580 * Resource manager off chan mode . 3581 * 0: turn off off chan mode. 1: turn on offchan mode 3582 */ 3583 WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3584 /* 3585 * Protection mode: 3586 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3587 */ 3588 WMI_10X_PDEV_PARAM_PROTECTION_MODE, 3589 /* Dynamic bandwidth 0: disable 1: enable */ 3590 WMI_10X_PDEV_PARAM_DYNAMIC_BW, 3591 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3592 WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3593 /* aggregrate sw retry threshold. 0-disable*/ 3594 WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH, 3595 /* Station kickout threshold (non of consecutive failures).0-disable */ 3596 WMI_10X_PDEV_PARAM_STA_KICKOUT_TH, 3597 /* Aggerate size scaling configuration per AC */ 3598 WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3599 /* LTR enable */ 3600 WMI_10X_PDEV_PARAM_LTR_ENABLE, 3601 /* LTR latency for BE, in us */ 3602 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE, 3603 /* LTR latency for BK, in us */ 3604 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK, 3605 /* LTR latency for VI, in us */ 3606 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI, 3607 /* LTR latency for VO, in us */ 3608 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO, 3609 /* LTR AC latency timeout, in ms */ 3610 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3611 /* LTR platform latency override, in us */ 3612 WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3613 /* LTR-RX override, in us */ 3614 WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE, 3615 /* Tx activity timeout for LTR, in us */ 3616 WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3617 /* L1SS state machine enable */ 3618 WMI_10X_PDEV_PARAM_L1SS_ENABLE, 3619 /* Deep sleep state machine enable */ 3620 WMI_10X_PDEV_PARAM_DSLEEP_ENABLE, 3621 /* pdev level stats update period in ms */ 3622 WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3623 /* vdev level stats update period in ms */ 3624 WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3625 /* peer level stats update period in ms */ 3626 WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3627 /* beacon filter status update period */ 3628 WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3629 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3630 WMI_10X_PDEV_PARAM_PMF_QOS, 3631 /* Access category on which ARP and DHCP frames are sent */ 3632 WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE, 3633 /* DCS configuration */ 3634 WMI_10X_PDEV_PARAM_DCS, 3635 /* Enable/Disable ANI on target */ 3636 WMI_10X_PDEV_PARAM_ANI_ENABLE, 3637 /* configure the ANI polling period */ 3638 WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD, 3639 /* configure the ANI listening period */ 3640 WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD, 3641 /* configure OFDM immunity level */ 3642 WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL, 3643 /* configure CCK immunity level */ 3644 WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL, 3645 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3646 WMI_10X_PDEV_PARAM_DYNTXCHAIN, 3647 /* Enable/Disable Fast channel reset*/ 3648 WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET, 3649 /* Set Bursting DUR */ 3650 WMI_10X_PDEV_PARAM_BURST_DUR, 3651 /* Set Bursting Enable*/ 3652 WMI_10X_PDEV_PARAM_BURST_ENABLE, 3653 3654 /* following are available as of firmware 10.2 */ 3655 WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 3656 WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE, 3657 WMI_10X_PDEV_PARAM_IGMPMLD_TID, 3658 WMI_10X_PDEV_PARAM_ANTENNA_GAIN, 3659 WMI_10X_PDEV_PARAM_RX_DECAP_MODE, 3660 WMI_10X_PDEV_PARAM_RX_FILTER, 3661 WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID, 3662 WMI_10X_PDEV_PARAM_PROXY_STA_MODE, 3663 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE, 3664 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 3665 WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 3666 WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE, 3667 WMI_10X_PDEV_PARAM_RTS_FIXED_RATE, 3668 WMI_10X_PDEV_PARAM_CAL_PERIOD 3669 }; 3670 3671 enum wmi_10_4_pdev_param { 3672 WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3673 WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK, 3674 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G, 3675 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G, 3676 WMI_10_4_PDEV_PARAM_TXPOWER_SCALE, 3677 WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE, 3678 WMI_10_4_PDEV_PARAM_BEACON_TX_MODE, 3679 WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3680 WMI_10_4_PDEV_PARAM_PROTECTION_MODE, 3681 WMI_10_4_PDEV_PARAM_DYNAMIC_BW, 3682 WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3683 WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH, 3684 WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH, 3685 WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3686 WMI_10_4_PDEV_PARAM_LTR_ENABLE, 3687 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE, 3688 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK, 3689 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI, 3690 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO, 3691 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3692 WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3693 WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE, 3694 WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3695 WMI_10_4_PDEV_PARAM_L1SS_ENABLE, 3696 WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE, 3697 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3698 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3699 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3700 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3701 WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3702 WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3703 WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3704 WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3705 WMI_10_4_PDEV_PARAM_PMF_QOS, 3706 WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE, 3707 WMI_10_4_PDEV_PARAM_DCS, 3708 WMI_10_4_PDEV_PARAM_ANI_ENABLE, 3709 WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD, 3710 WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD, 3711 WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL, 3712 WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL, 3713 WMI_10_4_PDEV_PARAM_DYNTXCHAIN, 3714 WMI_10_4_PDEV_PARAM_PROXY_STA, 3715 WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG, 3716 WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP, 3717 WMI_10_4_PDEV_PARAM_AGGR_BURST, 3718 WMI_10_4_PDEV_PARAM_RX_DECAP_MODE, 3719 WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET, 3720 WMI_10_4_PDEV_PARAM_BURST_DUR, 3721 WMI_10_4_PDEV_PARAM_BURST_ENABLE, 3722 WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 3723 WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE, 3724 WMI_10_4_PDEV_PARAM_IGMPMLD_TID, 3725 WMI_10_4_PDEV_PARAM_ANTENNA_GAIN, 3726 WMI_10_4_PDEV_PARAM_RX_FILTER, 3727 WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID, 3728 WMI_10_4_PDEV_PARAM_PROXY_STA_MODE, 3729 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE, 3730 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 3731 WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 3732 WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE, 3733 WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE, 3734 WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS, 3735 WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID, 3736 WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID, 3737 WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID, 3738 WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID, 3739 WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID, 3740 WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID, 3741 WMI_10_4_PDEV_PARAM_EN_STATS, 3742 WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY, 3743 WMI_10_4_PDEV_PARAM_NOISE_DETECTION, 3744 WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD, 3745 WMI_10_4_PDEV_PARAM_DPD_ENABLE, 3746 WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO, 3747 WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH, 3748 WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION, 3749 WMI_10_4_PDEV_PARAM_ANT_PLZN, 3750 WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT, 3751 WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL, 3752 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G, 3753 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G, 3754 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU, 3755 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU, 3756 WMI_10_4_PDEV_PARAM_CCA_THRESHOLD, 3757 WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE, 3758 WMI_10_4_PDEV_PARAM_CAL_PERIOD, 3759 WMI_10_4_PDEV_PARAM_PDEV_RESET, 3760 WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET, 3761 WMI_10_4_PDEV_PARAM_ARP_SRCADDR, 3762 WMI_10_4_PDEV_PARAM_ARP_DSTADDR, 3763 WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB, 3764 WMI_10_4_PDEV_PARAM_RX_BATCHMODE, 3765 WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY, 3766 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH, 3767 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR, 3768 WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE, 3769 WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE, 3770 WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY, 3771 WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, 3772 }; 3773 3774 struct wmi_pdev_set_param_cmd { 3775 __le32 param_id; 3776 __le32 param_value; 3777 } __packed; 3778 3779 /* valid period is 1 ~ 60000ms, unit in millisecond */ 3780 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000 3781 3782 struct wmi_pdev_get_tpc_config_cmd { 3783 /* parameter */ 3784 __le32 param; 3785 } __packed; 3786 3787 #define WMI_TPC_CONFIG_PARAM 1 3788 #define WMI_TPC_RATE_MAX 160 3789 #define WMI_TPC_TX_N_CHAIN 4 3790 #define WMI_TPC_PREAM_TABLE_MAX 10 3791 #define WMI_TPC_FLAG 3 3792 #define WMI_TPC_BUF_SIZE 10 3793 3794 enum wmi_tpc_table_type { 3795 WMI_TPC_TABLE_TYPE_CDD = 0, 3796 WMI_TPC_TABLE_TYPE_STBC = 1, 3797 WMI_TPC_TABLE_TYPE_TXBF = 2, 3798 }; 3799 3800 enum wmi_tpc_config_event_flag { 3801 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, 3802 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, 3803 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, 3804 }; 3805 3806 struct wmi_pdev_tpc_config_event { 3807 __le32 reg_domain; 3808 __le32 chan_freq; 3809 __le32 phy_mode; 3810 __le32 twice_antenna_reduction; 3811 __le32 twice_max_rd_power; 3812 a_sle32 twice_antenna_gain; 3813 __le32 power_limit; 3814 __le32 rate_max; 3815 __le32 num_tx_chain; 3816 __le32 ctl; 3817 __le32 flags; 3818 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 3819 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 3820 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 3821 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 3822 u8 rates_array[WMI_TPC_RATE_MAX]; 3823 } __packed; 3824 3825 /* Transmit power scale factor. */ 3826 enum wmi_tp_scale { 3827 WMI_TP_SCALE_MAX = 0, /* no scaling (default) */ 3828 WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ 3829 WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ 3830 WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ 3831 WMI_TP_SCALE_MIN = 4, /* min, but still on */ 3832 WMI_TP_SCALE_SIZE = 5, /* max num of enum */ 3833 }; 3834 3835 struct wmi_pdev_chanlist_update_event { 3836 /* number of channels */ 3837 __le32 num_chan; 3838 /* array of channels */ 3839 struct wmi_channel channel_list[1]; 3840 } __packed; 3841 3842 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32) 3843 3844 struct wmi_debug_mesg_event { 3845 /* message buffer, NULL terminated */ 3846 char bufp[WMI_MAX_DEBUG_MESG]; 3847 } __packed; 3848 3849 enum { 3850 /* P2P device */ 3851 VDEV_SUBTYPE_P2PDEV = 0, 3852 /* P2P client */ 3853 VDEV_SUBTYPE_P2PCLI, 3854 /* P2P GO */ 3855 VDEV_SUBTYPE_P2PGO, 3856 /* BT3.0 HS */ 3857 VDEV_SUBTYPE_BT, 3858 }; 3859 3860 struct wmi_pdev_set_channel_cmd { 3861 /* idnore power , only use flags , mode and freq */ 3862 struct wmi_channel chan; 3863 } __packed; 3864 3865 struct wmi_pdev_pktlog_enable_cmd { 3866 __le32 ev_bitmap; 3867 } __packed; 3868 3869 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */ 3870 #define WMI_DSCP_MAP_MAX (64) 3871 struct wmi_pdev_set_dscp_tid_map_cmd { 3872 /* map indicating DSCP to TID conversion */ 3873 __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX]; 3874 } __packed; 3875 3876 enum mcast_bcast_rate_id { 3877 WMI_SET_MCAST_RATE, 3878 WMI_SET_BCAST_RATE 3879 }; 3880 3881 struct mcast_bcast_rate { 3882 enum mcast_bcast_rate_id rate_id; 3883 __le32 rate; 3884 } __packed; 3885 3886 struct wmi_wmm_params { 3887 __le32 cwmin; 3888 __le32 cwmax; 3889 __le32 aifs; 3890 __le32 txop; 3891 __le32 acm; 3892 __le32 no_ack; 3893 } __packed; 3894 3895 struct wmi_pdev_set_wmm_params { 3896 struct wmi_wmm_params ac_be; 3897 struct wmi_wmm_params ac_bk; 3898 struct wmi_wmm_params ac_vi; 3899 struct wmi_wmm_params ac_vo; 3900 } __packed; 3901 3902 struct wmi_wmm_params_arg { 3903 u32 cwmin; 3904 u32 cwmax; 3905 u32 aifs; 3906 u32 txop; 3907 u32 acm; 3908 u32 no_ack; 3909 }; 3910 3911 struct wmi_wmm_params_all_arg { 3912 struct wmi_wmm_params_arg ac_be; 3913 struct wmi_wmm_params_arg ac_bk; 3914 struct wmi_wmm_params_arg ac_vi; 3915 struct wmi_wmm_params_arg ac_vo; 3916 }; 3917 3918 struct wmi_pdev_stats_tx { 3919 /* Num HTT cookies queued to dispatch list */ 3920 __le32 comp_queued; 3921 3922 /* Num HTT cookies dispatched */ 3923 __le32 comp_delivered; 3924 3925 /* Num MSDU queued to WAL */ 3926 __le32 msdu_enqued; 3927 3928 /* Num MPDU queue to WAL */ 3929 __le32 mpdu_enqued; 3930 3931 /* Num MSDUs dropped by WMM limit */ 3932 __le32 wmm_drop; 3933 3934 /* Num Local frames queued */ 3935 __le32 local_enqued; 3936 3937 /* Num Local frames done */ 3938 __le32 local_freed; 3939 3940 /* Num queued to HW */ 3941 __le32 hw_queued; 3942 3943 /* Num PPDU reaped from HW */ 3944 __le32 hw_reaped; 3945 3946 /* Num underruns */ 3947 __le32 underrun; 3948 3949 /* Num PPDUs cleaned up in TX abort */ 3950 __le32 tx_abort; 3951 3952 /* Num MPDUs requed by SW */ 3953 __le32 mpdus_requed; 3954 3955 /* excessive retries */ 3956 __le32 tx_ko; 3957 3958 /* data hw rate code */ 3959 __le32 data_rc; 3960 3961 /* Scheduler self triggers */ 3962 __le32 self_triggers; 3963 3964 /* frames dropped due to excessive sw retries */ 3965 __le32 sw_retry_failure; 3966 3967 /* illegal rate phy errors */ 3968 __le32 illgl_rate_phy_err; 3969 3970 /* wal pdev continuous xretry */ 3971 __le32 pdev_cont_xretry; 3972 3973 /* wal pdev continous xretry */ 3974 __le32 pdev_tx_timeout; 3975 3976 /* wal pdev resets */ 3977 __le32 pdev_resets; 3978 3979 /* frames dropped due to non-availability of stateless TIDs */ 3980 __le32 stateless_tid_alloc_failure; 3981 3982 __le32 phy_underrun; 3983 3984 /* MPDU is more than txop limit */ 3985 __le32 txop_ovf; 3986 } __packed; 3987 3988 struct wmi_10_4_pdev_stats_tx { 3989 /* Num HTT cookies queued to dispatch list */ 3990 __le32 comp_queued; 3991 3992 /* Num HTT cookies dispatched */ 3993 __le32 comp_delivered; 3994 3995 /* Num MSDU queued to WAL */ 3996 __le32 msdu_enqued; 3997 3998 /* Num MPDU queue to WAL */ 3999 __le32 mpdu_enqued; 4000 4001 /* Num MSDUs dropped by WMM limit */ 4002 __le32 wmm_drop; 4003 4004 /* Num Local frames queued */ 4005 __le32 local_enqued; 4006 4007 /* Num Local frames done */ 4008 __le32 local_freed; 4009 4010 /* Num queued to HW */ 4011 __le32 hw_queued; 4012 4013 /* Num PPDU reaped from HW */ 4014 __le32 hw_reaped; 4015 4016 /* Num underruns */ 4017 __le32 underrun; 4018 4019 /* HW Paused. */ 4020 __le32 hw_paused; 4021 4022 /* Num PPDUs cleaned up in TX abort */ 4023 __le32 tx_abort; 4024 4025 /* Num MPDUs requed by SW */ 4026 __le32 mpdus_requed; 4027 4028 /* excessive retries */ 4029 __le32 tx_ko; 4030 4031 /* data hw rate code */ 4032 __le32 data_rc; 4033 4034 /* Scheduler self triggers */ 4035 __le32 self_triggers; 4036 4037 /* frames dropped due to excessive sw retries */ 4038 __le32 sw_retry_failure; 4039 4040 /* illegal rate phy errors */ 4041 __le32 illgl_rate_phy_err; 4042 4043 /* wal pdev continuous xretry */ 4044 __le32 pdev_cont_xretry; 4045 4046 /* wal pdev tx timeouts */ 4047 __le32 pdev_tx_timeout; 4048 4049 /* wal pdev resets */ 4050 __le32 pdev_resets; 4051 4052 /* frames dropped due to non-availability of stateless TIDs */ 4053 __le32 stateless_tid_alloc_failure; 4054 4055 __le32 phy_underrun; 4056 4057 /* MPDU is more than txop limit */ 4058 __le32 txop_ovf; 4059 4060 /* Number of Sequences posted */ 4061 __le32 seq_posted; 4062 4063 /* Number of Sequences failed queueing */ 4064 __le32 seq_failed_queueing; 4065 4066 /* Number of Sequences completed */ 4067 __le32 seq_completed; 4068 4069 /* Number of Sequences restarted */ 4070 __le32 seq_restarted; 4071 4072 /* Number of MU Sequences posted */ 4073 __le32 mu_seq_posted; 4074 4075 /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */ 4076 __le32 mpdus_sw_flush; 4077 4078 /* Num MPDUs filtered by HW, all filter condition (TTL expired) */ 4079 __le32 mpdus_hw_filter; 4080 4081 /* Num MPDUs truncated by PDG 4082 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw) 4083 */ 4084 __le32 mpdus_truncated; 4085 4086 /* Num MPDUs that was tried but didn't receive ACK or BA */ 4087 __le32 mpdus_ack_failed; 4088 4089 /* Num MPDUs that was dropped due to expiry. */ 4090 __le32 mpdus_expired; 4091 } __packed; 4092 4093 struct wmi_pdev_stats_rx { 4094 /* Cnts any change in ring routing mid-ppdu */ 4095 __le32 mid_ppdu_route_change; 4096 4097 /* Total number of statuses processed */ 4098 __le32 status_rcvd; 4099 4100 /* Extra frags on rings 0-3 */ 4101 __le32 r0_frags; 4102 __le32 r1_frags; 4103 __le32 r2_frags; 4104 __le32 r3_frags; 4105 4106 /* MSDUs / MPDUs delivered to HTT */ 4107 __le32 htt_msdus; 4108 __le32 htt_mpdus; 4109 4110 /* MSDUs / MPDUs delivered to local stack */ 4111 __le32 loc_msdus; 4112 __le32 loc_mpdus; 4113 4114 /* AMSDUs that have more MSDUs than the status ring size */ 4115 __le32 oversize_amsdu; 4116 4117 /* Number of PHY errors */ 4118 __le32 phy_errs; 4119 4120 /* Number of PHY errors drops */ 4121 __le32 phy_err_drop; 4122 4123 /* Number of mpdu errors - FCS, MIC, ENC etc. */ 4124 __le32 mpdu_errs; 4125 } __packed; 4126 4127 struct wmi_pdev_stats_peer { 4128 /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ 4129 __le32 dummy; 4130 } __packed; 4131 4132 enum wmi_stats_id { 4133 WMI_STAT_PEER = BIT(0), 4134 WMI_STAT_AP = BIT(1), 4135 WMI_STAT_PDEV = BIT(2), 4136 WMI_STAT_VDEV = BIT(3), 4137 WMI_STAT_BCNFLT = BIT(4), 4138 WMI_STAT_VDEV_RATE = BIT(5), 4139 }; 4140 4141 enum wmi_10_4_stats_id { 4142 WMI_10_4_STAT_PEER = BIT(0), 4143 WMI_10_4_STAT_AP = BIT(1), 4144 WMI_10_4_STAT_INST = BIT(2), 4145 WMI_10_4_STAT_PEER_EXTD = BIT(3), 4146 }; 4147 4148 struct wlan_inst_rssi_args { 4149 __le16 cfg_retry_count; 4150 __le16 retry_count; 4151 }; 4152 4153 struct wmi_request_stats_cmd { 4154 __le32 stats_id; 4155 4156 __le32 vdev_id; 4157 4158 /* peer MAC address */ 4159 struct wmi_mac_addr peer_macaddr; 4160 4161 /* Instantaneous RSSI arguments */ 4162 struct wlan_inst_rssi_args inst_rssi_args; 4163 } __packed; 4164 4165 /* Suspend option */ 4166 enum { 4167 /* suspend */ 4168 WMI_PDEV_SUSPEND, 4169 4170 /* suspend and disable all interrupts */ 4171 WMI_PDEV_SUSPEND_AND_DISABLE_INTR, 4172 }; 4173 4174 struct wmi_pdev_suspend_cmd { 4175 /* suspend option sent to target */ 4176 __le32 suspend_opt; 4177 } __packed; 4178 4179 struct wmi_stats_event { 4180 __le32 stats_id; /* WMI_STAT_ */ 4181 /* 4182 * number of pdev stats event structures 4183 * (wmi_pdev_stats) 0 or 1 4184 */ 4185 __le32 num_pdev_stats; 4186 /* 4187 * number of vdev stats event structures 4188 * (wmi_vdev_stats) 0 or max vdevs 4189 */ 4190 __le32 num_vdev_stats; 4191 /* 4192 * number of peer stats event structures 4193 * (wmi_peer_stats) 0 or max peers 4194 */ 4195 __le32 num_peer_stats; 4196 __le32 num_bcnflt_stats; 4197 /* 4198 * followed by 4199 * num_pdev_stats * size of(struct wmi_pdev_stats) 4200 * num_vdev_stats * size of(struct wmi_vdev_stats) 4201 * num_peer_stats * size of(struct wmi_peer_stats) 4202 * 4203 * By having a zero sized array, the pointer to data area 4204 * becomes available without increasing the struct size 4205 */ 4206 u8 data[0]; 4207 } __packed; 4208 4209 struct wmi_10_2_stats_event { 4210 __le32 stats_id; /* %WMI_REQUEST_ */ 4211 __le32 num_pdev_stats; 4212 __le32 num_pdev_ext_stats; 4213 __le32 num_vdev_stats; 4214 __le32 num_peer_stats; 4215 __le32 num_bcnflt_stats; 4216 u8 data[0]; 4217 } __packed; 4218 4219 /* 4220 * PDEV statistics 4221 * TODO: add all PDEV stats here 4222 */ 4223 struct wmi_pdev_stats_base { 4224 __le32 chan_nf; 4225 __le32 tx_frame_count; /* Cycles spent transmitting frames */ 4226 __le32 rx_frame_count; /* Cycles spent receiving frames */ 4227 __le32 rx_clear_count; /* Total channel busy time, evidently */ 4228 __le32 cycle_count; /* Total on-channel time */ 4229 __le32 phy_err_count; 4230 __le32 chan_tx_pwr; 4231 } __packed; 4232 4233 struct wmi_pdev_stats { 4234 struct wmi_pdev_stats_base base; 4235 struct wmi_pdev_stats_tx tx; 4236 struct wmi_pdev_stats_rx rx; 4237 struct wmi_pdev_stats_peer peer; 4238 } __packed; 4239 4240 struct wmi_pdev_stats_extra { 4241 __le32 ack_rx_bad; 4242 __le32 rts_bad; 4243 __le32 rts_good; 4244 __le32 fcs_bad; 4245 __le32 no_beacons; 4246 __le32 mib_int_count; 4247 } __packed; 4248 4249 struct wmi_10x_pdev_stats { 4250 struct wmi_pdev_stats_base base; 4251 struct wmi_pdev_stats_tx tx; 4252 struct wmi_pdev_stats_rx rx; 4253 struct wmi_pdev_stats_peer peer; 4254 struct wmi_pdev_stats_extra extra; 4255 } __packed; 4256 4257 struct wmi_pdev_stats_mem { 4258 __le32 dram_free; 4259 __le32 iram_free; 4260 } __packed; 4261 4262 struct wmi_10_2_pdev_stats { 4263 struct wmi_pdev_stats_base base; 4264 struct wmi_pdev_stats_tx tx; 4265 __le32 mc_drop; 4266 struct wmi_pdev_stats_rx rx; 4267 __le32 pdev_rx_timeout; 4268 struct wmi_pdev_stats_mem mem; 4269 struct wmi_pdev_stats_peer peer; 4270 struct wmi_pdev_stats_extra extra; 4271 } __packed; 4272 4273 struct wmi_10_4_pdev_stats { 4274 struct wmi_pdev_stats_base base; 4275 struct wmi_10_4_pdev_stats_tx tx; 4276 struct wmi_pdev_stats_rx rx; 4277 __le32 rx_ovfl_errs; 4278 struct wmi_pdev_stats_mem mem; 4279 __le32 sram_free_size; 4280 struct wmi_pdev_stats_extra extra; 4281 } __packed; 4282 4283 /* 4284 * VDEV statistics 4285 * TODO: add all VDEV stats here 4286 */ 4287 struct wmi_vdev_stats { 4288 __le32 vdev_id; 4289 } __packed; 4290 4291 /* 4292 * peer statistics. 4293 * TODO: add more stats 4294 */ 4295 struct wmi_peer_stats { 4296 struct wmi_mac_addr peer_macaddr; 4297 __le32 peer_rssi; 4298 __le32 peer_tx_rate; 4299 } __packed; 4300 4301 struct wmi_10x_peer_stats { 4302 struct wmi_peer_stats old; 4303 __le32 peer_rx_rate; 4304 } __packed; 4305 4306 struct wmi_10_2_peer_stats { 4307 struct wmi_peer_stats old; 4308 __le32 peer_rx_rate; 4309 __le32 current_per; 4310 __le32 retries; 4311 __le32 tx_rate_count; 4312 __le32 max_4ms_frame_len; 4313 __le32 total_sub_frames; 4314 __le32 tx_bytes; 4315 __le32 num_pkt_loss_overflow[4]; 4316 __le32 num_pkt_loss_excess_retry[4]; 4317 } __packed; 4318 4319 struct wmi_10_2_4_peer_stats { 4320 struct wmi_10_2_peer_stats common; 4321 __le32 peer_rssi_changed; 4322 } __packed; 4323 4324 struct wmi_10_2_4_ext_peer_stats { 4325 struct wmi_10_2_peer_stats common; 4326 __le32 peer_rssi_changed; 4327 __le32 rx_duration; 4328 } __packed; 4329 4330 struct wmi_10_4_peer_stats { 4331 struct wmi_mac_addr peer_macaddr; 4332 __le32 peer_rssi; 4333 __le32 peer_rssi_seq_num; 4334 __le32 peer_tx_rate; 4335 __le32 peer_rx_rate; 4336 __le32 current_per; 4337 __le32 retries; 4338 __le32 tx_rate_count; 4339 __le32 max_4ms_frame_len; 4340 __le32 total_sub_frames; 4341 __le32 tx_bytes; 4342 __le32 num_pkt_loss_overflow[4]; 4343 __le32 num_pkt_loss_excess_retry[4]; 4344 __le32 peer_rssi_changed; 4345 } __packed; 4346 4347 struct wmi_10_4_peer_extd_stats { 4348 struct wmi_mac_addr peer_macaddr; 4349 __le32 inactive_time; 4350 __le32 peer_chain_rssi; 4351 __le32 rx_duration; 4352 __le32 reserved[10]; 4353 } __packed; 4354 4355 struct wmi_10_4_bss_bcn_stats { 4356 __le32 vdev_id; 4357 __le32 bss_bcns_dropped; 4358 __le32 bss_bcn_delivered; 4359 } __packed; 4360 4361 struct wmi_10_4_bss_bcn_filter_stats { 4362 __le32 bcns_dropped; 4363 __le32 bcns_delivered; 4364 __le32 active_filters; 4365 struct wmi_10_4_bss_bcn_stats bss_stats; 4366 } __packed; 4367 4368 struct wmi_10_2_pdev_ext_stats { 4369 __le32 rx_rssi_comb; 4370 __le32 rx_rssi[4]; 4371 __le32 rx_mcs[10]; 4372 __le32 tx_mcs[10]; 4373 __le32 ack_rssi; 4374 } __packed; 4375 4376 struct wmi_vdev_create_cmd { 4377 __le32 vdev_id; 4378 __le32 vdev_type; 4379 __le32 vdev_subtype; 4380 struct wmi_mac_addr vdev_macaddr; 4381 } __packed; 4382 4383 enum wmi_vdev_type { 4384 WMI_VDEV_TYPE_AP = 1, 4385 WMI_VDEV_TYPE_STA = 2, 4386 WMI_VDEV_TYPE_IBSS = 3, 4387 WMI_VDEV_TYPE_MONITOR = 4, 4388 }; 4389 4390 enum wmi_vdev_subtype { 4391 WMI_VDEV_SUBTYPE_NONE, 4392 WMI_VDEV_SUBTYPE_P2P_DEVICE, 4393 WMI_VDEV_SUBTYPE_P2P_CLIENT, 4394 WMI_VDEV_SUBTYPE_P2P_GO, 4395 WMI_VDEV_SUBTYPE_PROXY_STA, 4396 WMI_VDEV_SUBTYPE_MESH_11S, 4397 WMI_VDEV_SUBTYPE_MESH_NON_11S, 4398 }; 4399 4400 enum wmi_vdev_subtype_legacy { 4401 WMI_VDEV_SUBTYPE_LEGACY_NONE = 0, 4402 WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1, 4403 WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2, 4404 WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3, 4405 WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4, 4406 }; 4407 4408 enum wmi_vdev_subtype_10_2_4 { 4409 WMI_VDEV_SUBTYPE_10_2_4_NONE = 0, 4410 WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1, 4411 WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2, 4412 WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3, 4413 WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4, 4414 WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5, 4415 }; 4416 4417 enum wmi_vdev_subtype_10_4 { 4418 WMI_VDEV_SUBTYPE_10_4_NONE = 0, 4419 WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1, 4420 WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2, 4421 WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3, 4422 WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4, 4423 WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5, 4424 WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6, 4425 }; 4426 4427 /* values for vdev_subtype */ 4428 4429 /* values for vdev_start_request flags */ 4430 /* 4431 * Indicates that AP VDEV uses hidden ssid. only valid for 4432 * AP/GO */ 4433 #define WMI_VDEV_START_HIDDEN_SSID (1 << 0) 4434 /* 4435 * Indicates if robust management frame/management frame 4436 * protection is enabled. For GO/AP vdevs, it indicates that 4437 * it may support station/client associations with RMF enabled. 4438 * For STA/client vdevs, it indicates that sta will 4439 * associate with AP with RMF enabled. */ 4440 #define WMI_VDEV_START_PMF_ENABLED (1 << 1) 4441 4442 struct wmi_p2p_noa_descriptor { 4443 __le32 type_count; /* 255: continuous schedule, 0: reserved */ 4444 __le32 duration; /* Absent period duration in micro seconds */ 4445 __le32 interval; /* Absent period interval in micro seconds */ 4446 __le32 start_time; /* 32 bit tsf time when in starts */ 4447 } __packed; 4448 4449 struct wmi_vdev_start_request_cmd { 4450 /* WMI channel */ 4451 struct wmi_channel chan; 4452 /* unique id identifying the VDEV, generated by the caller */ 4453 __le32 vdev_id; 4454 /* requestor id identifying the caller module */ 4455 __le32 requestor_id; 4456 /* beacon interval from received beacon */ 4457 __le32 beacon_interval; 4458 /* DTIM Period from the received beacon */ 4459 __le32 dtim_period; 4460 /* Flags */ 4461 __le32 flags; 4462 /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ 4463 struct wmi_ssid ssid; 4464 /* beacon/probe response xmit rate. Applicable for SoftAP. */ 4465 __le32 bcn_tx_rate; 4466 /* beacon/probe response xmit power. Applicable for SoftAP. */ 4467 __le32 bcn_tx_power; 4468 /* number of p2p NOA descriptor(s) from scan entry */ 4469 __le32 num_noa_descriptors; 4470 /* 4471 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID. 4472 * During CAC, Our HW shouldn't ack ditected frames 4473 */ 4474 __le32 disable_hw_ack; 4475 /* actual p2p NOA descriptor from scan entry */ 4476 struct wmi_p2p_noa_descriptor noa_descriptors[2]; 4477 } __packed; 4478 4479 struct wmi_vdev_restart_request_cmd { 4480 struct wmi_vdev_start_request_cmd vdev_start_request_cmd; 4481 } __packed; 4482 4483 struct wmi_vdev_start_request_arg { 4484 u32 vdev_id; 4485 struct wmi_channel_arg channel; 4486 u32 bcn_intval; 4487 u32 dtim_period; 4488 u8 *ssid; 4489 u32 ssid_len; 4490 u32 bcn_tx_rate; 4491 u32 bcn_tx_power; 4492 bool disable_hw_ack; 4493 bool hidden_ssid; 4494 bool pmf_enabled; 4495 }; 4496 4497 struct wmi_vdev_delete_cmd { 4498 /* unique id identifying the VDEV, generated by the caller */ 4499 __le32 vdev_id; 4500 } __packed; 4501 4502 struct wmi_vdev_up_cmd { 4503 __le32 vdev_id; 4504 __le32 vdev_assoc_id; 4505 struct wmi_mac_addr vdev_bssid; 4506 } __packed; 4507 4508 struct wmi_vdev_stop_cmd { 4509 __le32 vdev_id; 4510 } __packed; 4511 4512 struct wmi_vdev_down_cmd { 4513 __le32 vdev_id; 4514 } __packed; 4515 4516 struct wmi_vdev_standby_response_cmd { 4517 /* unique id identifying the VDEV, generated by the caller */ 4518 __le32 vdev_id; 4519 } __packed; 4520 4521 struct wmi_vdev_resume_response_cmd { 4522 /* unique id identifying the VDEV, generated by the caller */ 4523 __le32 vdev_id; 4524 } __packed; 4525 4526 struct wmi_vdev_set_param_cmd { 4527 __le32 vdev_id; 4528 __le32 param_id; 4529 __le32 param_value; 4530 } __packed; 4531 4532 #define WMI_MAX_KEY_INDEX 3 4533 #define WMI_MAX_KEY_LEN 32 4534 4535 #define WMI_KEY_PAIRWISE 0x00 4536 #define WMI_KEY_GROUP 0x01 4537 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */ 4538 4539 struct wmi_key_seq_counter { 4540 __le32 key_seq_counter_l; 4541 __le32 key_seq_counter_h; 4542 } __packed; 4543 4544 #define WMI_CIPHER_NONE 0x0 /* clear key */ 4545 #define WMI_CIPHER_WEP 0x1 4546 #define WMI_CIPHER_TKIP 0x2 4547 #define WMI_CIPHER_AES_OCB 0x3 4548 #define WMI_CIPHER_AES_CCM 0x4 4549 #define WMI_CIPHER_WAPI 0x5 4550 #define WMI_CIPHER_CKIP 0x6 4551 #define WMI_CIPHER_AES_CMAC 0x7 4552 4553 struct wmi_vdev_install_key_cmd { 4554 __le32 vdev_id; 4555 struct wmi_mac_addr peer_macaddr; 4556 __le32 key_idx; 4557 __le32 key_flags; 4558 __le32 key_cipher; /* %WMI_CIPHER_ */ 4559 struct wmi_key_seq_counter key_rsc_counter; 4560 struct wmi_key_seq_counter key_global_rsc_counter; 4561 struct wmi_key_seq_counter key_tsc_counter; 4562 u8 wpi_key_rsc_counter[16]; 4563 u8 wpi_key_tsc_counter[16]; 4564 __le32 key_len; 4565 __le32 key_txmic_len; 4566 __le32 key_rxmic_len; 4567 4568 /* contains key followed by tx mic followed by rx mic */ 4569 u8 key_data[0]; 4570 } __packed; 4571 4572 struct wmi_vdev_install_key_arg { 4573 u32 vdev_id; 4574 const u8 *macaddr; 4575 u32 key_idx; 4576 u32 key_flags; 4577 u32 key_cipher; 4578 u32 key_len; 4579 u32 key_txmic_len; 4580 u32 key_rxmic_len; 4581 const void *key_data; 4582 }; 4583 4584 /* 4585 * vdev fixed rate format: 4586 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_ 4587 * - nss - b5:b4 - ss number (0 mean 1ss) 4588 * - rate_mcs - b3:b0 - as below 4589 * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps, 4590 * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s) 4591 * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps, 4592 * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps 4593 * HT/VHT: MCS index 4594 */ 4595 4596 /* Preamble types to be used with VDEV fixed rate configuration */ 4597 enum wmi_rate_preamble { 4598 WMI_RATE_PREAMBLE_OFDM, 4599 WMI_RATE_PREAMBLE_CCK, 4600 WMI_RATE_PREAMBLE_HT, 4601 WMI_RATE_PREAMBLE_VHT, 4602 }; 4603 4604 #define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3)) 4605 #define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3) 4606 #define ATH10K_HW_RATECODE(rate, nss, preamble) \ 4607 (((preamble) << 6) | ((nss) << 4) | (rate)) 4608 4609 /* Value to disable fixed rate setting */ 4610 #define WMI_FIXED_RATE_NONE (0xff) 4611 4612 struct wmi_vdev_param_map { 4613 u32 rts_threshold; 4614 u32 fragmentation_threshold; 4615 u32 beacon_interval; 4616 u32 listen_interval; 4617 u32 multicast_rate; 4618 u32 mgmt_tx_rate; 4619 u32 slot_time; 4620 u32 preamble; 4621 u32 swba_time; 4622 u32 wmi_vdev_stats_update_period; 4623 u32 wmi_vdev_pwrsave_ageout_time; 4624 u32 wmi_vdev_host_swba_interval; 4625 u32 dtim_period; 4626 u32 wmi_vdev_oc_scheduler_air_time_limit; 4627 u32 wds; 4628 u32 atim_window; 4629 u32 bmiss_count_max; 4630 u32 bmiss_first_bcnt; 4631 u32 bmiss_final_bcnt; 4632 u32 feature_wmm; 4633 u32 chwidth; 4634 u32 chextoffset; 4635 u32 disable_htprotection; 4636 u32 sta_quickkickout; 4637 u32 mgmt_rate; 4638 u32 protection_mode; 4639 u32 fixed_rate; 4640 u32 sgi; 4641 u32 ldpc; 4642 u32 tx_stbc; 4643 u32 rx_stbc; 4644 u32 intra_bss_fwd; 4645 u32 def_keyid; 4646 u32 nss; 4647 u32 bcast_data_rate; 4648 u32 mcast_data_rate; 4649 u32 mcast_indicate; 4650 u32 dhcp_indicate; 4651 u32 unknown_dest_indicate; 4652 u32 ap_keepalive_min_idle_inactive_time_secs; 4653 u32 ap_keepalive_max_idle_inactive_time_secs; 4654 u32 ap_keepalive_max_unresponsive_time_secs; 4655 u32 ap_enable_nawds; 4656 u32 mcast2ucast_set; 4657 u32 enable_rtscts; 4658 u32 txbf; 4659 u32 packet_powersave; 4660 u32 drop_unencry; 4661 u32 tx_encap_type; 4662 u32 ap_detect_out_of_sync_sleeping_sta_time_secs; 4663 u32 rc_num_retries; 4664 u32 cabq_maxdur; 4665 u32 mfptest_set; 4666 u32 rts_fixed_rate; 4667 u32 vht_sgimask; 4668 u32 vht80_ratemask; 4669 u32 early_rx_adjust_enable; 4670 u32 early_rx_tgt_bmiss_num; 4671 u32 early_rx_bmiss_sample_cycle; 4672 u32 early_rx_slop_step; 4673 u32 early_rx_init_slop; 4674 u32 early_rx_adjust_pause; 4675 u32 proxy_sta; 4676 u32 meru_vc; 4677 u32 rx_decap_type; 4678 u32 bw_nss_ratemask; 4679 u32 set_tsf; 4680 }; 4681 4682 #define WMI_VDEV_PARAM_UNSUPPORTED 0 4683 4684 /* the definition of different VDEV parameters */ 4685 enum wmi_vdev_param { 4686 /* RTS Threshold */ 4687 WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1, 4688 /* Fragmentation threshold */ 4689 WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 4690 /* beacon interval in TUs */ 4691 WMI_VDEV_PARAM_BEACON_INTERVAL, 4692 /* Listen interval in TUs */ 4693 WMI_VDEV_PARAM_LISTEN_INTERVAL, 4694 /* multicast rate in Mbps */ 4695 WMI_VDEV_PARAM_MULTICAST_RATE, 4696 /* management frame rate in Mbps */ 4697 WMI_VDEV_PARAM_MGMT_TX_RATE, 4698 /* slot time (long vs short) */ 4699 WMI_VDEV_PARAM_SLOT_TIME, 4700 /* preamble (long vs short) */ 4701 WMI_VDEV_PARAM_PREAMBLE, 4702 /* SWBA time (time before tbtt in msec) */ 4703 WMI_VDEV_PARAM_SWBA_TIME, 4704 /* time period for updating VDEV stats */ 4705 WMI_VDEV_STATS_UPDATE_PERIOD, 4706 /* age out time in msec for frames queued for station in power save */ 4707 WMI_VDEV_PWRSAVE_AGEOUT_TIME, 4708 /* 4709 * Host SWBA interval (time in msec before tbtt for SWBA event 4710 * generation). 4711 */ 4712 WMI_VDEV_HOST_SWBA_INTERVAL, 4713 /* DTIM period (specified in units of num beacon intervals) */ 4714 WMI_VDEV_PARAM_DTIM_PERIOD, 4715 /* 4716 * scheduler air time limit for this VDEV. used by off chan 4717 * scheduler. 4718 */ 4719 WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 4720 /* enable/dsiable WDS for this VDEV */ 4721 WMI_VDEV_PARAM_WDS, 4722 /* ATIM Window */ 4723 WMI_VDEV_PARAM_ATIM_WINDOW, 4724 /* BMISS max */ 4725 WMI_VDEV_PARAM_BMISS_COUNT_MAX, 4726 /* BMISS first time */ 4727 WMI_VDEV_PARAM_BMISS_FIRST_BCNT, 4728 /* BMISS final time */ 4729 WMI_VDEV_PARAM_BMISS_FINAL_BCNT, 4730 /* WMM enables/disabled */ 4731 WMI_VDEV_PARAM_FEATURE_WMM, 4732 /* Channel width */ 4733 WMI_VDEV_PARAM_CHWIDTH, 4734 /* Channel Offset */ 4735 WMI_VDEV_PARAM_CHEXTOFFSET, 4736 /* Disable HT Protection */ 4737 WMI_VDEV_PARAM_DISABLE_HTPROTECTION, 4738 /* Quick STA Kickout */ 4739 WMI_VDEV_PARAM_STA_QUICKKICKOUT, 4740 /* Rate to be used with Management frames */ 4741 WMI_VDEV_PARAM_MGMT_RATE, 4742 /* Protection Mode */ 4743 WMI_VDEV_PARAM_PROTECTION_MODE, 4744 /* Fixed rate setting */ 4745 WMI_VDEV_PARAM_FIXED_RATE, 4746 /* Short GI Enable/Disable */ 4747 WMI_VDEV_PARAM_SGI, 4748 /* Enable LDPC */ 4749 WMI_VDEV_PARAM_LDPC, 4750 /* Enable Tx STBC */ 4751 WMI_VDEV_PARAM_TX_STBC, 4752 /* Enable Rx STBC */ 4753 WMI_VDEV_PARAM_RX_STBC, 4754 /* Intra BSS forwarding */ 4755 WMI_VDEV_PARAM_INTRA_BSS_FWD, 4756 /* Setting Default xmit key for Vdev */ 4757 WMI_VDEV_PARAM_DEF_KEYID, 4758 /* NSS width */ 4759 WMI_VDEV_PARAM_NSS, 4760 /* Set the custom rate for the broadcast data frames */ 4761 WMI_VDEV_PARAM_BCAST_DATA_RATE, 4762 /* Set the custom rate (rate-code) for multicast data frames */ 4763 WMI_VDEV_PARAM_MCAST_DATA_RATE, 4764 /* Tx multicast packet indicate Enable/Disable */ 4765 WMI_VDEV_PARAM_MCAST_INDICATE, 4766 /* Tx DHCP packet indicate Enable/Disable */ 4767 WMI_VDEV_PARAM_DHCP_INDICATE, 4768 /* Enable host inspection of Tx unicast packet to unknown destination */ 4769 WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 4770 4771 /* The minimum amount of time AP begins to consider STA inactive */ 4772 WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 4773 4774 /* 4775 * An associated STA is considered inactive when there is no recent 4776 * TX/RX activity and no downlink frames are buffered for it. Once a 4777 * STA exceeds the maximum idle inactive time, the AP will send an 4778 * 802.11 data-null as a keep alive to verify the STA is still 4779 * associated. If the STA does ACK the data-null, or if the data-null 4780 * is buffered and the STA does not retrieve it, the STA will be 4781 * considered unresponsive 4782 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 4783 */ 4784 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 4785 4786 /* 4787 * An associated STA is considered unresponsive if there is no recent 4788 * TX/RX activity and downlink frames are buffered for it. Once a STA 4789 * exceeds the maximum unresponsive time, the AP will send a 4790 * WMI_STA_KICKOUT event to the host so the STA can be deleted. */ 4791 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 4792 4793 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 4794 WMI_VDEV_PARAM_AP_ENABLE_NAWDS, 4795 /* Enable/Disable RTS-CTS */ 4796 WMI_VDEV_PARAM_ENABLE_RTSCTS, 4797 /* Enable TXBFee/er */ 4798 WMI_VDEV_PARAM_TXBF, 4799 4800 /* Set packet power save */ 4801 WMI_VDEV_PARAM_PACKET_POWERSAVE, 4802 4803 /* 4804 * Drops un-encrypted packets if eceived in an encrypted connection 4805 * otherwise forwards to host. 4806 */ 4807 WMI_VDEV_PARAM_DROP_UNENCRY, 4808 4809 /* 4810 * Set the encapsulation type for frames. 4811 */ 4812 WMI_VDEV_PARAM_TX_ENCAP_TYPE, 4813 }; 4814 4815 /* the definition of different VDEV parameters */ 4816 enum wmi_10x_vdev_param { 4817 /* RTS Threshold */ 4818 WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1, 4819 /* Fragmentation threshold */ 4820 WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 4821 /* beacon interval in TUs */ 4822 WMI_10X_VDEV_PARAM_BEACON_INTERVAL, 4823 /* Listen interval in TUs */ 4824 WMI_10X_VDEV_PARAM_LISTEN_INTERVAL, 4825 /* multicast rate in Mbps */ 4826 WMI_10X_VDEV_PARAM_MULTICAST_RATE, 4827 /* management frame rate in Mbps */ 4828 WMI_10X_VDEV_PARAM_MGMT_TX_RATE, 4829 /* slot time (long vs short) */ 4830 WMI_10X_VDEV_PARAM_SLOT_TIME, 4831 /* preamble (long vs short) */ 4832 WMI_10X_VDEV_PARAM_PREAMBLE, 4833 /* SWBA time (time before tbtt in msec) */ 4834 WMI_10X_VDEV_PARAM_SWBA_TIME, 4835 /* time period for updating VDEV stats */ 4836 WMI_10X_VDEV_STATS_UPDATE_PERIOD, 4837 /* age out time in msec for frames queued for station in power save */ 4838 WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME, 4839 /* 4840 * Host SWBA interval (time in msec before tbtt for SWBA event 4841 * generation). 4842 */ 4843 WMI_10X_VDEV_HOST_SWBA_INTERVAL, 4844 /* DTIM period (specified in units of num beacon intervals) */ 4845 WMI_10X_VDEV_PARAM_DTIM_PERIOD, 4846 /* 4847 * scheduler air time limit for this VDEV. used by off chan 4848 * scheduler. 4849 */ 4850 WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 4851 /* enable/dsiable WDS for this VDEV */ 4852 WMI_10X_VDEV_PARAM_WDS, 4853 /* ATIM Window */ 4854 WMI_10X_VDEV_PARAM_ATIM_WINDOW, 4855 /* BMISS max */ 4856 WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX, 4857 /* WMM enables/disabled */ 4858 WMI_10X_VDEV_PARAM_FEATURE_WMM, 4859 /* Channel width */ 4860 WMI_10X_VDEV_PARAM_CHWIDTH, 4861 /* Channel Offset */ 4862 WMI_10X_VDEV_PARAM_CHEXTOFFSET, 4863 /* Disable HT Protection */ 4864 WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION, 4865 /* Quick STA Kickout */ 4866 WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT, 4867 /* Rate to be used with Management frames */ 4868 WMI_10X_VDEV_PARAM_MGMT_RATE, 4869 /* Protection Mode */ 4870 WMI_10X_VDEV_PARAM_PROTECTION_MODE, 4871 /* Fixed rate setting */ 4872 WMI_10X_VDEV_PARAM_FIXED_RATE, 4873 /* Short GI Enable/Disable */ 4874 WMI_10X_VDEV_PARAM_SGI, 4875 /* Enable LDPC */ 4876 WMI_10X_VDEV_PARAM_LDPC, 4877 /* Enable Tx STBC */ 4878 WMI_10X_VDEV_PARAM_TX_STBC, 4879 /* Enable Rx STBC */ 4880 WMI_10X_VDEV_PARAM_RX_STBC, 4881 /* Intra BSS forwarding */ 4882 WMI_10X_VDEV_PARAM_INTRA_BSS_FWD, 4883 /* Setting Default xmit key for Vdev */ 4884 WMI_10X_VDEV_PARAM_DEF_KEYID, 4885 /* NSS width */ 4886 WMI_10X_VDEV_PARAM_NSS, 4887 /* Set the custom rate for the broadcast data frames */ 4888 WMI_10X_VDEV_PARAM_BCAST_DATA_RATE, 4889 /* Set the custom rate (rate-code) for multicast data frames */ 4890 WMI_10X_VDEV_PARAM_MCAST_DATA_RATE, 4891 /* Tx multicast packet indicate Enable/Disable */ 4892 WMI_10X_VDEV_PARAM_MCAST_INDICATE, 4893 /* Tx DHCP packet indicate Enable/Disable */ 4894 WMI_10X_VDEV_PARAM_DHCP_INDICATE, 4895 /* Enable host inspection of Tx unicast packet to unknown destination */ 4896 WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 4897 4898 /* The minimum amount of time AP begins to consider STA inactive */ 4899 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 4900 4901 /* 4902 * An associated STA is considered inactive when there is no recent 4903 * TX/RX activity and no downlink frames are buffered for it. Once a 4904 * STA exceeds the maximum idle inactive time, the AP will send an 4905 * 802.11 data-null as a keep alive to verify the STA is still 4906 * associated. If the STA does ACK the data-null, or if the data-null 4907 * is buffered and the STA does not retrieve it, the STA will be 4908 * considered unresponsive 4909 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 4910 */ 4911 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 4912 4913 /* 4914 * An associated STA is considered unresponsive if there is no recent 4915 * TX/RX activity and downlink frames are buffered for it. Once a STA 4916 * exceeds the maximum unresponsive time, the AP will send a 4917 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. */ 4918 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 4919 4920 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 4921 WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS, 4922 4923 WMI_10X_VDEV_PARAM_MCAST2UCAST_SET, 4924 /* Enable/Disable RTS-CTS */ 4925 WMI_10X_VDEV_PARAM_ENABLE_RTSCTS, 4926 4927 WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 4928 4929 /* following are available as of firmware 10.2 */ 4930 WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE, 4931 WMI_10X_VDEV_PARAM_CABQ_MAXDUR, 4932 WMI_10X_VDEV_PARAM_MFPTEST_SET, 4933 WMI_10X_VDEV_PARAM_RTS_FIXED_RATE, 4934 WMI_10X_VDEV_PARAM_VHT_SGIMASK, 4935 WMI_10X_VDEV_PARAM_VHT80_RATEMASK, 4936 WMI_10X_VDEV_PARAM_TSF_INCREMENT, 4937 }; 4938 4939 enum wmi_10_4_vdev_param { 4940 WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1, 4941 WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 4942 WMI_10_4_VDEV_PARAM_BEACON_INTERVAL, 4943 WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL, 4944 WMI_10_4_VDEV_PARAM_MULTICAST_RATE, 4945 WMI_10_4_VDEV_PARAM_MGMT_TX_RATE, 4946 WMI_10_4_VDEV_PARAM_SLOT_TIME, 4947 WMI_10_4_VDEV_PARAM_PREAMBLE, 4948 WMI_10_4_VDEV_PARAM_SWBA_TIME, 4949 WMI_10_4_VDEV_STATS_UPDATE_PERIOD, 4950 WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME, 4951 WMI_10_4_VDEV_HOST_SWBA_INTERVAL, 4952 WMI_10_4_VDEV_PARAM_DTIM_PERIOD, 4953 WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 4954 WMI_10_4_VDEV_PARAM_WDS, 4955 WMI_10_4_VDEV_PARAM_ATIM_WINDOW, 4956 WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX, 4957 WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT, 4958 WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT, 4959 WMI_10_4_VDEV_PARAM_FEATURE_WMM, 4960 WMI_10_4_VDEV_PARAM_CHWIDTH, 4961 WMI_10_4_VDEV_PARAM_CHEXTOFFSET, 4962 WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION, 4963 WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT, 4964 WMI_10_4_VDEV_PARAM_MGMT_RATE, 4965 WMI_10_4_VDEV_PARAM_PROTECTION_MODE, 4966 WMI_10_4_VDEV_PARAM_FIXED_RATE, 4967 WMI_10_4_VDEV_PARAM_SGI, 4968 WMI_10_4_VDEV_PARAM_LDPC, 4969 WMI_10_4_VDEV_PARAM_TX_STBC, 4970 WMI_10_4_VDEV_PARAM_RX_STBC, 4971 WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD, 4972 WMI_10_4_VDEV_PARAM_DEF_KEYID, 4973 WMI_10_4_VDEV_PARAM_NSS, 4974 WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE, 4975 WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE, 4976 WMI_10_4_VDEV_PARAM_MCAST_INDICATE, 4977 WMI_10_4_VDEV_PARAM_DHCP_INDICATE, 4978 WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 4979 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 4980 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 4981 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 4982 WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS, 4983 WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET, 4984 WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS, 4985 WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES, 4986 WMI_10_4_VDEV_PARAM_TXBF, 4987 WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE, 4988 WMI_10_4_VDEV_PARAM_DROP_UNENCRY, 4989 WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE, 4990 WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 4991 WMI_10_4_VDEV_PARAM_CABQ_MAXDUR, 4992 WMI_10_4_VDEV_PARAM_MFPTEST_SET, 4993 WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE, 4994 WMI_10_4_VDEV_PARAM_VHT_SGIMASK, 4995 WMI_10_4_VDEV_PARAM_VHT80_RATEMASK, 4996 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE, 4997 WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM, 4998 WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE, 4999 WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP, 5000 WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP, 5001 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE, 5002 WMI_10_4_VDEV_PARAM_PROXY_STA, 5003 WMI_10_4_VDEV_PARAM_MERU_VC, 5004 WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE, 5005 WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK, 5006 WMI_10_4_VDEV_PARAM_SENSOR_AP, 5007 WMI_10_4_VDEV_PARAM_BEACON_RATE, 5008 WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS, 5009 WMI_10_4_VDEV_PARAM_STA_KICKOUT, 5010 WMI_10_4_VDEV_PARAM_CAPABILITIES, 5011 WMI_10_4_VDEV_PARAM_TSF_INCREMENT, 5012 }; 5013 5014 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0) 5015 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1) 5016 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2) 5017 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3) 5018 5019 #define WMI_TXBF_STS_CAP_OFFSET_LSB 4 5020 #define WMI_TXBF_STS_CAP_OFFSET_MASK 0xf0 5021 #define WMI_BF_SOUND_DIM_OFFSET_LSB 8 5022 #define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00 5023 5024 /* slot time long */ 5025 #define WMI_VDEV_SLOT_TIME_LONG 0x1 5026 /* slot time short */ 5027 #define WMI_VDEV_SLOT_TIME_SHORT 0x2 5028 /* preablbe long */ 5029 #define WMI_VDEV_PREAMBLE_LONG 0x1 5030 /* preablbe short */ 5031 #define WMI_VDEV_PREAMBLE_SHORT 0x2 5032 5033 enum wmi_start_event_param { 5034 WMI_VDEV_RESP_START_EVENT = 0, 5035 WMI_VDEV_RESP_RESTART_EVENT, 5036 }; 5037 5038 struct wmi_vdev_start_response_event { 5039 __le32 vdev_id; 5040 __le32 req_id; 5041 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 5042 __le32 status; 5043 } __packed; 5044 5045 struct wmi_vdev_standby_req_event { 5046 /* unique id identifying the VDEV, generated by the caller */ 5047 __le32 vdev_id; 5048 } __packed; 5049 5050 struct wmi_vdev_resume_req_event { 5051 /* unique id identifying the VDEV, generated by the caller */ 5052 __le32 vdev_id; 5053 } __packed; 5054 5055 struct wmi_vdev_stopped_event { 5056 /* unique id identifying the VDEV, generated by the caller */ 5057 __le32 vdev_id; 5058 } __packed; 5059 5060 /* 5061 * common structure used for simple events 5062 * (stopped, resume_req, standby response) 5063 */ 5064 struct wmi_vdev_simple_event { 5065 /* unique id identifying the VDEV, generated by the caller */ 5066 __le32 vdev_id; 5067 } __packed; 5068 5069 /* VDEV start response status codes */ 5070 /* VDEV successfully started */ 5071 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 5072 5073 /* requested VDEV not found */ 5074 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1 5075 5076 /* unsupported VDEV combination */ 5077 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2 5078 5079 /* TODO: please add more comments if you have in-depth information */ 5080 struct wmi_vdev_spectral_conf_cmd { 5081 __le32 vdev_id; 5082 5083 /* number of fft samples to send (0 for infinite) */ 5084 __le32 scan_count; 5085 __le32 scan_period; 5086 __le32 scan_priority; 5087 5088 /* number of bins in the FFT: 2^(fft_size - bin_scale) */ 5089 __le32 scan_fft_size; 5090 __le32 scan_gc_ena; 5091 __le32 scan_restart_ena; 5092 __le32 scan_noise_floor_ref; 5093 __le32 scan_init_delay; 5094 __le32 scan_nb_tone_thr; 5095 __le32 scan_str_bin_thr; 5096 __le32 scan_wb_rpt_mode; 5097 __le32 scan_rssi_rpt_mode; 5098 __le32 scan_rssi_thr; 5099 __le32 scan_pwr_format; 5100 5101 /* rpt_mode: Format of FFT report to software for spectral scan 5102 * triggered FFTs: 5103 * 0: No FFT report (only spectral scan summary report) 5104 * 1: 2-dword summary of metrics for each completed FFT + spectral 5105 * scan summary report 5106 * 2: 2-dword summary of metrics for each completed FFT + 5107 * 1x- oversampled bins(in-band) per FFT + spectral scan summary 5108 * report 5109 * 3: 2-dword summary of metrics for each completed FFT + 5110 * 2x- oversampled bins (all) per FFT + spectral scan summary 5111 */ 5112 __le32 scan_rpt_mode; 5113 __le32 scan_bin_scale; 5114 __le32 scan_dbm_adj; 5115 __le32 scan_chn_mask; 5116 } __packed; 5117 5118 struct wmi_vdev_spectral_conf_arg { 5119 u32 vdev_id; 5120 u32 scan_count; 5121 u32 scan_period; 5122 u32 scan_priority; 5123 u32 scan_fft_size; 5124 u32 scan_gc_ena; 5125 u32 scan_restart_ena; 5126 u32 scan_noise_floor_ref; 5127 u32 scan_init_delay; 5128 u32 scan_nb_tone_thr; 5129 u32 scan_str_bin_thr; 5130 u32 scan_wb_rpt_mode; 5131 u32 scan_rssi_rpt_mode; 5132 u32 scan_rssi_thr; 5133 u32 scan_pwr_format; 5134 u32 scan_rpt_mode; 5135 u32 scan_bin_scale; 5136 u32 scan_dbm_adj; 5137 u32 scan_chn_mask; 5138 }; 5139 5140 #define WMI_SPECTRAL_ENABLE_DEFAULT 0 5141 #define WMI_SPECTRAL_COUNT_DEFAULT 0 5142 #define WMI_SPECTRAL_PERIOD_DEFAULT 35 5143 #define WMI_SPECTRAL_PRIORITY_DEFAULT 1 5144 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7 5145 #define WMI_SPECTRAL_GC_ENA_DEFAULT 1 5146 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0 5147 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96 5148 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80 5149 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12 5150 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8 5151 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0 5152 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0 5153 #define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0 5154 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0 5155 #define WMI_SPECTRAL_RPT_MODE_DEFAULT 2 5156 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1 5157 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1 5158 #define WMI_SPECTRAL_CHN_MASK_DEFAULT 1 5159 5160 struct wmi_vdev_spectral_enable_cmd { 5161 __le32 vdev_id; 5162 __le32 trigger_cmd; 5163 __le32 enable_cmd; 5164 } __packed; 5165 5166 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1 5167 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2 5168 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1 5169 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2 5170 5171 /* Beacon processing related command and event structures */ 5172 struct wmi_bcn_tx_hdr { 5173 __le32 vdev_id; 5174 __le32 tx_rate; 5175 __le32 tx_power; 5176 __le32 bcn_len; 5177 } __packed; 5178 5179 struct wmi_bcn_tx_cmd { 5180 struct wmi_bcn_tx_hdr hdr; 5181 u8 *bcn[0]; 5182 } __packed; 5183 5184 struct wmi_bcn_tx_arg { 5185 u32 vdev_id; 5186 u32 tx_rate; 5187 u32 tx_power; 5188 u32 bcn_len; 5189 const void *bcn; 5190 }; 5191 5192 enum wmi_bcn_tx_ref_flags { 5193 WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1, 5194 WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2, 5195 }; 5196 5197 /* TODO: It is unclear why "no antenna" works while any other seemingly valid 5198 * chainmask yields no beacons on the air at all. 5199 */ 5200 #define WMI_BCN_TX_REF_DEF_ANTENNA 0 5201 5202 struct wmi_bcn_tx_ref_cmd { 5203 __le32 vdev_id; 5204 __le32 data_len; 5205 /* physical address of the frame - dma pointer */ 5206 __le32 data_ptr; 5207 /* id for host to track */ 5208 __le32 msdu_id; 5209 /* frame ctrl to setup PPDU desc */ 5210 __le32 frame_control; 5211 /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */ 5212 __le32 flags; 5213 /* introduced in 10.2 */ 5214 __le32 antenna_mask; 5215 } __packed; 5216 5217 /* Beacon filter */ 5218 #define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */ 5219 #define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */ 5220 #define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */ 5221 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */ 5222 #define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */ 5223 5224 struct wmi_bcn_filter_rx_cmd { 5225 /* Filter ID */ 5226 __le32 bcn_filter_id; 5227 /* Filter type - wmi_bcn_filter */ 5228 __le32 bcn_filter; 5229 /* Buffer len */ 5230 __le32 bcn_filter_len; 5231 /* Filter info (threshold, BSSID, RSSI) */ 5232 u8 *bcn_filter_buf; 5233 } __packed; 5234 5235 /* Capabilities and IEs to be passed to firmware */ 5236 struct wmi_bcn_prb_info { 5237 /* Capabilities */ 5238 __le32 caps; 5239 /* ERP info */ 5240 __le32 erp; 5241 /* Advanced capabilities */ 5242 /* HT capabilities */ 5243 /* HT Info */ 5244 /* ibss_dfs */ 5245 /* wpa Info */ 5246 /* rsn Info */ 5247 /* rrm info */ 5248 /* ath_ext */ 5249 /* app IE */ 5250 } __packed; 5251 5252 struct wmi_bcn_tmpl_cmd { 5253 /* unique id identifying the VDEV, generated by the caller */ 5254 __le32 vdev_id; 5255 /* TIM IE offset from the beginning of the template. */ 5256 __le32 tim_ie_offset; 5257 /* beacon probe capabilities and IEs */ 5258 struct wmi_bcn_prb_info bcn_prb_info; 5259 /* beacon buffer length */ 5260 __le32 buf_len; 5261 /* variable length data */ 5262 u8 data[1]; 5263 } __packed; 5264 5265 struct wmi_prb_tmpl_cmd { 5266 /* unique id identifying the VDEV, generated by the caller */ 5267 __le32 vdev_id; 5268 /* beacon probe capabilities and IEs */ 5269 struct wmi_bcn_prb_info bcn_prb_info; 5270 /* beacon buffer length */ 5271 __le32 buf_len; 5272 /* Variable length data */ 5273 u8 data[1]; 5274 } __packed; 5275 5276 enum wmi_sta_ps_mode { 5277 /* enable power save for the given STA VDEV */ 5278 WMI_STA_PS_MODE_DISABLED = 0, 5279 /* disable power save for a given STA VDEV */ 5280 WMI_STA_PS_MODE_ENABLED = 1, 5281 }; 5282 5283 struct wmi_sta_powersave_mode_cmd { 5284 /* unique id identifying the VDEV, generated by the caller */ 5285 __le32 vdev_id; 5286 5287 /* 5288 * Power save mode 5289 * (see enum wmi_sta_ps_mode) 5290 */ 5291 __le32 sta_ps_mode; 5292 } __packed; 5293 5294 enum wmi_csa_offload_en { 5295 WMI_CSA_OFFLOAD_DISABLE = 0, 5296 WMI_CSA_OFFLOAD_ENABLE = 1, 5297 }; 5298 5299 struct wmi_csa_offload_enable_cmd { 5300 __le32 vdev_id; 5301 __le32 csa_offload_enable; 5302 } __packed; 5303 5304 struct wmi_csa_offload_chanswitch_cmd { 5305 __le32 vdev_id; 5306 struct wmi_channel chan; 5307 } __packed; 5308 5309 /* 5310 * This parameter controls the policy for retrieving frames from AP while the 5311 * STA is in sleep state. 5312 * 5313 * Only takes affect if the sta_ps_mode is enabled 5314 */ 5315 enum wmi_sta_ps_param_rx_wake_policy { 5316 /* 5317 * Wake up when ever there is an RX activity on the VDEV. In this mode 5318 * the Power save SM(state machine) will come out of sleep by either 5319 * sending null frame (or) a data frame (with PS==0) in response to TIM 5320 * bit set in the received beacon frame from AP. 5321 */ 5322 WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0, 5323 5324 /* 5325 * Here the power save state machine will not wakeup in response to TIM 5326 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD 5327 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all 5328 * access categories are delivery-enabled, the station will send a 5329 * UAPSD trigger frame, otherwise it will send a PS-Poll. 5330 */ 5331 WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, 5332 }; 5333 5334 /* 5335 * Number of tx frames/beacon that cause the power save SM to wake up. 5336 * 5337 * Value 1 causes the SM to wake up for every TX. Value 0 has a special 5338 * meaning, It will cause the SM to never wake up. This is useful if you want 5339 * to keep the system to sleep all the time for some kind of test mode . host 5340 * can change this parameter any time. It will affect at the next tx frame. 5341 */ 5342 enum wmi_sta_ps_param_tx_wake_threshold { 5343 WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, 5344 WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, 5345 5346 /* 5347 * Values greater than one indicate that many TX attempts per beacon 5348 * interval before the STA will wake up 5349 */ 5350 }; 5351 5352 /* 5353 * The maximum number of PS-Poll frames the FW will send in response to 5354 * traffic advertised in TIM before waking up (by sending a null frame with PS 5355 * = 0). Value 0 has a special meaning: there is no maximum count and the FW 5356 * will send as many PS-Poll as are necessary to retrieve buffered BU. This 5357 * parameter is used when the RX wake policy is 5358 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake 5359 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE. 5360 */ 5361 enum wmi_sta_ps_param_pspoll_count { 5362 WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0, 5363 /* 5364 * Values greater than 0 indicate the maximum numer of PS-Poll frames 5365 * FW will send before waking up. 5366 */ 5367 5368 /* When u-APSD is enabled the firmware will be very reluctant to exit 5369 * STA PS. This could result in very poor Rx performance with STA doing 5370 * PS-Poll for each and every buffered frame. This value is a bit 5371 * arbitrary. 5372 */ 5373 WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3, 5374 }; 5375 5376 /* 5377 * This will include the delivery and trigger enabled state for every AC. 5378 * This is the negotiated state with AP. The host MLME needs to set this based 5379 * on AP capability and the state Set in the association request by the 5380 * station MLME.Lower 8 bits of the value specify the UAPSD configuration. 5381 */ 5382 #define WMI_UAPSD_AC_TYPE_DELI 0 5383 #define WMI_UAPSD_AC_TYPE_TRIG 1 5384 5385 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \ 5386 (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1)) 5387 5388 enum wmi_sta_ps_param_uapsd { 5389 WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5390 WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5391 WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5392 WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5393 WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5394 WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5395 WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5396 WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5397 }; 5398 5399 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX 5400 5401 struct wmi_sta_uapsd_auto_trig_param { 5402 __le32 wmm_ac; 5403 __le32 user_priority; 5404 __le32 service_interval; 5405 __le32 suspend_interval; 5406 __le32 delay_interval; 5407 }; 5408 5409 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param { 5410 __le32 vdev_id; 5411 struct wmi_mac_addr peer_macaddr; 5412 __le32 num_ac; 5413 }; 5414 5415 struct wmi_sta_uapsd_auto_trig_arg { 5416 u32 wmm_ac; 5417 u32 user_priority; 5418 u32 service_interval; 5419 u32 suspend_interval; 5420 u32 delay_interval; 5421 }; 5422 5423 enum wmi_sta_powersave_param { 5424 /* 5425 * Controls how frames are retrievd from AP while STA is sleeping 5426 * 5427 * (see enum wmi_sta_ps_param_rx_wake_policy) 5428 */ 5429 WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0, 5430 5431 /* 5432 * The STA will go active after this many TX 5433 * 5434 * (see enum wmi_sta_ps_param_tx_wake_threshold) 5435 */ 5436 WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, 5437 5438 /* 5439 * Number of PS-Poll to send before STA wakes up 5440 * 5441 * (see enum wmi_sta_ps_param_pspoll_count) 5442 * 5443 */ 5444 WMI_STA_PS_PARAM_PSPOLL_COUNT = 2, 5445 5446 /* 5447 * TX/RX inactivity time in msec before going to sleep. 5448 * 5449 * The power save SM will monitor tx/rx activity on the VDEV, if no 5450 * activity for the specified msec of the parameter the Power save 5451 * SM will go to sleep. 5452 */ 5453 WMI_STA_PS_PARAM_INACTIVITY_TIME = 3, 5454 5455 /* 5456 * Set uapsd configuration. 5457 * 5458 * (see enum wmi_sta_ps_param_uapsd) 5459 */ 5460 WMI_STA_PS_PARAM_UAPSD = 4, 5461 }; 5462 5463 struct wmi_sta_powersave_param_cmd { 5464 __le32 vdev_id; 5465 __le32 param_id; /* %WMI_STA_PS_PARAM_ */ 5466 __le32 param_value; 5467 } __packed; 5468 5469 /* No MIMO power save */ 5470 #define WMI_STA_MIMO_PS_MODE_DISABLE 5471 /* mimo powersave mode static*/ 5472 #define WMI_STA_MIMO_PS_MODE_STATIC 5473 /* mimo powersave mode dynamic */ 5474 #define WMI_STA_MIMO_PS_MODE_DYNAMIC 5475 5476 struct wmi_sta_mimo_ps_mode_cmd { 5477 /* unique id identifying the VDEV, generated by the caller */ 5478 __le32 vdev_id; 5479 /* mimo powersave mode as defined above */ 5480 __le32 mimo_pwrsave_mode; 5481 } __packed; 5482 5483 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */ 5484 enum wmi_ap_ps_param_uapsd { 5485 WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5486 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5487 WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5488 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5489 WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5490 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5491 WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5492 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5493 }; 5494 5495 /* U-APSD maximum service period of peer station */ 5496 enum wmi_ap_ps_peer_param_max_sp { 5497 WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, 5498 WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1, 5499 WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2, 5500 WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3, 5501 MAX_WMI_AP_PS_PEER_PARAM_MAX_SP, 5502 }; 5503 5504 /* 5505 * AP power save parameter 5506 * Set a power save specific parameter for a peer station 5507 */ 5508 enum wmi_ap_ps_peer_param { 5509 /* Set uapsd configuration for a given peer. 5510 * 5511 * Include the delivery and trigger enabled state for every AC. 5512 * The host MLME needs to set this based on AP capability and stations 5513 * request Set in the association request received from the station. 5514 * 5515 * Lower 8 bits of the value specify the UAPSD configuration. 5516 * 5517 * (see enum wmi_ap_ps_param_uapsd) 5518 * The default value is 0. 5519 */ 5520 WMI_AP_PS_PEER_PARAM_UAPSD = 0, 5521 5522 /* 5523 * Set the service period for a UAPSD capable station 5524 * 5525 * The service period from wme ie in the (re)assoc request frame. 5526 * 5527 * (see enum wmi_ap_ps_peer_param_max_sp) 5528 */ 5529 WMI_AP_PS_PEER_PARAM_MAX_SP = 1, 5530 5531 /* Time in seconds for aging out buffered frames for STA in PS */ 5532 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, 5533 }; 5534 5535 struct wmi_ap_ps_peer_cmd { 5536 /* unique id identifying the VDEV, generated by the caller */ 5537 __le32 vdev_id; 5538 5539 /* peer MAC address */ 5540 struct wmi_mac_addr peer_macaddr; 5541 5542 /* AP powersave param (see enum wmi_ap_ps_peer_param) */ 5543 __le32 param_id; 5544 5545 /* AP powersave param value */ 5546 __le32 param_value; 5547 } __packed; 5548 5549 /* 128 clients = 4 words */ 5550 #define WMI_TIM_BITMAP_ARRAY_SIZE 4 5551 5552 struct wmi_tim_info { 5553 __le32 tim_len; 5554 __le32 tim_mcast; 5555 __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE]; 5556 __le32 tim_changed; 5557 __le32 tim_num_ps_pending; 5558 } __packed; 5559 5560 struct wmi_tim_info_arg { 5561 __le32 tim_len; 5562 __le32 tim_mcast; 5563 const __le32 *tim_bitmap; 5564 __le32 tim_changed; 5565 __le32 tim_num_ps_pending; 5566 } __packed; 5567 5568 /* Maximum number of NOA Descriptors supported */ 5569 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4 5570 #define WMI_P2P_OPPPS_ENABLE_BIT BIT(0) 5571 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1 5572 #define WMI_P2P_NOA_CHANGED_BIT BIT(0) 5573 5574 struct wmi_p2p_noa_info { 5575 /* Bit 0 - Flag to indicate an update in NOA schedule 5576 Bits 7-1 - Reserved */ 5577 u8 changed; 5578 /* NOA index */ 5579 u8 index; 5580 /* Bit 0 - Opp PS state of the AP 5581 Bits 1-7 - Ctwindow in TUs */ 5582 u8 ctwindow_oppps; 5583 /* Number of NOA descriptors */ 5584 u8 num_descriptors; 5585 5586 struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS]; 5587 } __packed; 5588 5589 struct wmi_bcn_info { 5590 struct wmi_tim_info tim_info; 5591 struct wmi_p2p_noa_info p2p_noa_info; 5592 } __packed; 5593 5594 struct wmi_host_swba_event { 5595 __le32 vdev_map; 5596 struct wmi_bcn_info bcn_info[0]; 5597 } __packed; 5598 5599 struct wmi_10_2_4_bcn_info { 5600 struct wmi_tim_info tim_info; 5601 /* The 10.2.4 FW doesn't have p2p NOA info */ 5602 } __packed; 5603 5604 struct wmi_10_2_4_host_swba_event { 5605 __le32 vdev_map; 5606 struct wmi_10_2_4_bcn_info bcn_info[0]; 5607 } __packed; 5608 5609 /* 16 words = 512 client + 1 word = for guard */ 5610 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17 5611 5612 struct wmi_10_4_tim_info { 5613 __le32 tim_len; 5614 __le32 tim_mcast; 5615 __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE]; 5616 __le32 tim_changed; 5617 __le32 tim_num_ps_pending; 5618 } __packed; 5619 5620 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1 5621 5622 struct wmi_10_4_p2p_noa_info { 5623 /* Bit 0 - Flag to indicate an update in NOA schedule 5624 * Bits 7-1 - Reserved 5625 */ 5626 u8 changed; 5627 /* NOA index */ 5628 u8 index; 5629 /* Bit 0 - Opp PS state of the AP 5630 * Bits 1-7 - Ctwindow in TUs 5631 */ 5632 u8 ctwindow_oppps; 5633 /* Number of NOA descriptors */ 5634 u8 num_descriptors; 5635 5636 struct wmi_p2p_noa_descriptor 5637 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS]; 5638 } __packed; 5639 5640 struct wmi_10_4_bcn_info { 5641 struct wmi_10_4_tim_info tim_info; 5642 struct wmi_10_4_p2p_noa_info p2p_noa_info; 5643 } __packed; 5644 5645 struct wmi_10_4_host_swba_event { 5646 __le32 vdev_map; 5647 struct wmi_10_4_bcn_info bcn_info[0]; 5648 } __packed; 5649 5650 #define WMI_MAX_AP_VDEV 16 5651 5652 struct wmi_tbtt_offset_event { 5653 __le32 vdev_map; 5654 __le32 tbttoffset_list[WMI_MAX_AP_VDEV]; 5655 } __packed; 5656 5657 struct wmi_peer_create_cmd { 5658 __le32 vdev_id; 5659 struct wmi_mac_addr peer_macaddr; 5660 } __packed; 5661 5662 enum wmi_peer_type { 5663 WMI_PEER_TYPE_DEFAULT = 0, 5664 WMI_PEER_TYPE_BSS = 1, 5665 WMI_PEER_TYPE_TDLS = 2, 5666 }; 5667 5668 struct wmi_peer_delete_cmd { 5669 __le32 vdev_id; 5670 struct wmi_mac_addr peer_macaddr; 5671 } __packed; 5672 5673 struct wmi_peer_flush_tids_cmd { 5674 __le32 vdev_id; 5675 struct wmi_mac_addr peer_macaddr; 5676 __le32 peer_tid_bitmap; 5677 } __packed; 5678 5679 struct wmi_fixed_rate { 5680 /* 5681 * rate mode . 0: disable fixed rate (auto rate) 5682 * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps 5683 * 2: ht20 11n rate specified as mcs index 5684 * 3: ht40 11n rate specified as mcs index 5685 */ 5686 __le32 rate_mode; 5687 /* 5688 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB) 5689 * and series 3 is stored at byte 3 (MSB) 5690 */ 5691 __le32 rate_series; 5692 /* 5693 * 4 retry counts for 4 rate series. retry count for rate 0 is stored 5694 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3 5695 * (MSB) 5696 */ 5697 __le32 rate_retries; 5698 } __packed; 5699 5700 struct wmi_peer_fixed_rate_cmd { 5701 /* unique id identifying the VDEV, generated by the caller */ 5702 __le32 vdev_id; 5703 /* peer MAC address */ 5704 struct wmi_mac_addr peer_macaddr; 5705 /* fixed rate */ 5706 struct wmi_fixed_rate peer_fixed_rate; 5707 } __packed; 5708 5709 #define WMI_MGMT_TID 17 5710 5711 struct wmi_addba_clear_resp_cmd { 5712 /* unique id identifying the VDEV, generated by the caller */ 5713 __le32 vdev_id; 5714 /* peer MAC address */ 5715 struct wmi_mac_addr peer_macaddr; 5716 } __packed; 5717 5718 struct wmi_addba_send_cmd { 5719 /* unique id identifying the VDEV, generated by the caller */ 5720 __le32 vdev_id; 5721 /* peer MAC address */ 5722 struct wmi_mac_addr peer_macaddr; 5723 /* Tid number */ 5724 __le32 tid; 5725 /* Buffer/Window size*/ 5726 __le32 buffersize; 5727 } __packed; 5728 5729 struct wmi_delba_send_cmd { 5730 /* unique id identifying the VDEV, generated by the caller */ 5731 __le32 vdev_id; 5732 /* peer MAC address */ 5733 struct wmi_mac_addr peer_macaddr; 5734 /* Tid number */ 5735 __le32 tid; 5736 /* Is Initiator */ 5737 __le32 initiator; 5738 /* Reason code */ 5739 __le32 reasoncode; 5740 } __packed; 5741 5742 struct wmi_addba_setresponse_cmd { 5743 /* unique id identifying the vdev, generated by the caller */ 5744 __le32 vdev_id; 5745 /* peer mac address */ 5746 struct wmi_mac_addr peer_macaddr; 5747 /* Tid number */ 5748 __le32 tid; 5749 /* status code */ 5750 __le32 statuscode; 5751 } __packed; 5752 5753 struct wmi_send_singleamsdu_cmd { 5754 /* unique id identifying the vdev, generated by the caller */ 5755 __le32 vdev_id; 5756 /* peer mac address */ 5757 struct wmi_mac_addr peer_macaddr; 5758 /* Tid number */ 5759 __le32 tid; 5760 } __packed; 5761 5762 enum wmi_peer_smps_state { 5763 WMI_PEER_SMPS_PS_NONE = 0x0, 5764 WMI_PEER_SMPS_STATIC = 0x1, 5765 WMI_PEER_SMPS_DYNAMIC = 0x2 5766 }; 5767 5768 enum wmi_peer_chwidth { 5769 WMI_PEER_CHWIDTH_20MHZ = 0, 5770 WMI_PEER_CHWIDTH_40MHZ = 1, 5771 WMI_PEER_CHWIDTH_80MHZ = 2, 5772 }; 5773 5774 enum wmi_peer_param { 5775 WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */ 5776 WMI_PEER_AMPDU = 0x2, 5777 WMI_PEER_AUTHORIZE = 0x3, 5778 WMI_PEER_CHAN_WIDTH = 0x4, 5779 WMI_PEER_NSS = 0x5, 5780 WMI_PEER_USE_4ADDR = 0x6, 5781 WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */ 5782 }; 5783 5784 struct wmi_peer_set_param_cmd { 5785 __le32 vdev_id; 5786 struct wmi_mac_addr peer_macaddr; 5787 __le32 param_id; 5788 __le32 param_value; 5789 } __packed; 5790 5791 #define MAX_SUPPORTED_RATES 128 5792 5793 struct wmi_rate_set { 5794 /* total number of rates */ 5795 __le32 num_rates; 5796 /* 5797 * rates (each 8bit value) packed into a 32 bit word. 5798 * the rates are filled from least significant byte to most 5799 * significant byte. 5800 */ 5801 __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1]; 5802 } __packed; 5803 5804 struct wmi_rate_set_arg { 5805 unsigned int num_rates; 5806 u8 rates[MAX_SUPPORTED_RATES]; 5807 }; 5808 5809 /* 5810 * NOTE: It would bea good idea to represent the Tx MCS 5811 * info in one word and Rx in another word. This is split 5812 * into multiple words for convenience 5813 */ 5814 struct wmi_vht_rate_set { 5815 __le32 rx_max_rate; /* Max Rx data rate */ 5816 __le32 rx_mcs_set; /* Negotiated RX VHT rates */ 5817 __le32 tx_max_rate; /* Max Tx data rate */ 5818 __le32 tx_mcs_set; /* Negotiated TX VHT rates */ 5819 } __packed; 5820 5821 struct wmi_vht_rate_set_arg { 5822 u32 rx_max_rate; 5823 u32 rx_mcs_set; 5824 u32 tx_max_rate; 5825 u32 tx_mcs_set; 5826 }; 5827 5828 struct wmi_peer_set_rates_cmd { 5829 /* peer MAC address */ 5830 struct wmi_mac_addr peer_macaddr; 5831 /* legacy rate set */ 5832 struct wmi_rate_set peer_legacy_rates; 5833 /* ht rate set */ 5834 struct wmi_rate_set peer_ht_rates; 5835 } __packed; 5836 5837 struct wmi_peer_set_q_empty_callback_cmd { 5838 /* unique id identifying the VDEV, generated by the caller */ 5839 __le32 vdev_id; 5840 /* peer MAC address */ 5841 struct wmi_mac_addr peer_macaddr; 5842 __le32 callback_enable; 5843 } __packed; 5844 5845 struct wmi_peer_flags_map { 5846 u32 auth; 5847 u32 qos; 5848 u32 need_ptk_4_way; 5849 u32 need_gtk_2_way; 5850 u32 apsd; 5851 u32 ht; 5852 u32 bw40; 5853 u32 stbc; 5854 u32 ldbc; 5855 u32 dyn_mimops; 5856 u32 static_mimops; 5857 u32 spatial_mux; 5858 u32 vht; 5859 u32 bw80; 5860 u32 vht_2g; 5861 u32 pmf; 5862 }; 5863 5864 enum wmi_peer_flags { 5865 WMI_PEER_AUTH = 0x00000001, 5866 WMI_PEER_QOS = 0x00000002, 5867 WMI_PEER_NEED_PTK_4_WAY = 0x00000004, 5868 WMI_PEER_NEED_GTK_2_WAY = 0x00000010, 5869 WMI_PEER_APSD = 0x00000800, 5870 WMI_PEER_HT = 0x00001000, 5871 WMI_PEER_40MHZ = 0x00002000, 5872 WMI_PEER_STBC = 0x00008000, 5873 WMI_PEER_LDPC = 0x00010000, 5874 WMI_PEER_DYN_MIMOPS = 0x00020000, 5875 WMI_PEER_STATIC_MIMOPS = 0x00040000, 5876 WMI_PEER_SPATIAL_MUX = 0x00200000, 5877 WMI_PEER_VHT = 0x02000000, 5878 WMI_PEER_80MHZ = 0x04000000, 5879 WMI_PEER_VHT_2G = 0x08000000, 5880 WMI_PEER_PMF = 0x10000000, 5881 }; 5882 5883 enum wmi_10x_peer_flags { 5884 WMI_10X_PEER_AUTH = 0x00000001, 5885 WMI_10X_PEER_QOS = 0x00000002, 5886 WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004, 5887 WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010, 5888 WMI_10X_PEER_APSD = 0x00000800, 5889 WMI_10X_PEER_HT = 0x00001000, 5890 WMI_10X_PEER_40MHZ = 0x00002000, 5891 WMI_10X_PEER_STBC = 0x00008000, 5892 WMI_10X_PEER_LDPC = 0x00010000, 5893 WMI_10X_PEER_DYN_MIMOPS = 0x00020000, 5894 WMI_10X_PEER_STATIC_MIMOPS = 0x00040000, 5895 WMI_10X_PEER_SPATIAL_MUX = 0x00200000, 5896 WMI_10X_PEER_VHT = 0x02000000, 5897 WMI_10X_PEER_80MHZ = 0x04000000, 5898 }; 5899 5900 enum wmi_10_2_peer_flags { 5901 WMI_10_2_PEER_AUTH = 0x00000001, 5902 WMI_10_2_PEER_QOS = 0x00000002, 5903 WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004, 5904 WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010, 5905 WMI_10_2_PEER_APSD = 0x00000800, 5906 WMI_10_2_PEER_HT = 0x00001000, 5907 WMI_10_2_PEER_40MHZ = 0x00002000, 5908 WMI_10_2_PEER_STBC = 0x00008000, 5909 WMI_10_2_PEER_LDPC = 0x00010000, 5910 WMI_10_2_PEER_DYN_MIMOPS = 0x00020000, 5911 WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000, 5912 WMI_10_2_PEER_SPATIAL_MUX = 0x00200000, 5913 WMI_10_2_PEER_VHT = 0x02000000, 5914 WMI_10_2_PEER_80MHZ = 0x04000000, 5915 WMI_10_2_PEER_VHT_2G = 0x08000000, 5916 WMI_10_2_PEER_PMF = 0x10000000, 5917 }; 5918 5919 /* 5920 * Peer rate capabilities. 5921 * 5922 * This is of interest to the ratecontrol 5923 * module which resides in the firmware. The bit definitions are 5924 * consistent with that defined in if_athrate.c. 5925 */ 5926 #define WMI_RC_DS_FLAG 0x01 5927 #define WMI_RC_CW40_FLAG 0x02 5928 #define WMI_RC_SGI_FLAG 0x04 5929 #define WMI_RC_HT_FLAG 0x08 5930 #define WMI_RC_RTSCTS_FLAG 0x10 5931 #define WMI_RC_TX_STBC_FLAG 0x20 5932 #define WMI_RC_RX_STBC_FLAG 0xC0 5933 #define WMI_RC_RX_STBC_FLAG_S 6 5934 #define WMI_RC_WEP_TKIP_FLAG 0x100 5935 #define WMI_RC_TS_FLAG 0x200 5936 #define WMI_RC_UAPSD_FLAG 0x400 5937 5938 /* Maximum listen interval supported by hw in units of beacon interval */ 5939 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5 5940 5941 struct wmi_common_peer_assoc_complete_cmd { 5942 struct wmi_mac_addr peer_macaddr; 5943 __le32 vdev_id; 5944 __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */ 5945 __le32 peer_associd; /* 16 LSBs */ 5946 __le32 peer_flags; 5947 __le32 peer_caps; /* 16 LSBs */ 5948 __le32 peer_listen_intval; 5949 __le32 peer_ht_caps; 5950 __le32 peer_max_mpdu; 5951 __le32 peer_mpdu_density; /* 0..16 */ 5952 __le32 peer_rate_caps; 5953 struct wmi_rate_set peer_legacy_rates; 5954 struct wmi_rate_set peer_ht_rates; 5955 __le32 peer_nss; /* num of spatial streams */ 5956 __le32 peer_vht_caps; 5957 __le32 peer_phymode; 5958 struct wmi_vht_rate_set peer_vht_rates; 5959 }; 5960 5961 struct wmi_main_peer_assoc_complete_cmd { 5962 struct wmi_common_peer_assoc_complete_cmd cmd; 5963 5964 /* HT Operation Element of the peer. Five bytes packed in 2 5965 * INT32 array and filled from lsb to msb. */ 5966 __le32 peer_ht_info[2]; 5967 } __packed; 5968 5969 struct wmi_10_1_peer_assoc_complete_cmd { 5970 struct wmi_common_peer_assoc_complete_cmd cmd; 5971 } __packed; 5972 5973 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0 5974 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f 5975 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4 5976 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0 5977 5978 struct wmi_10_2_peer_assoc_complete_cmd { 5979 struct wmi_common_peer_assoc_complete_cmd cmd; 5980 __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */ 5981 } __packed; 5982 5983 struct wmi_10_4_peer_assoc_complete_cmd { 5984 struct wmi_10_2_peer_assoc_complete_cmd cmd; 5985 __le32 peer_bw_rxnss_override; 5986 } __packed; 5987 5988 struct wmi_peer_assoc_complete_arg { 5989 u8 addr[ETH_ALEN]; 5990 u32 vdev_id; 5991 bool peer_reassoc; 5992 u16 peer_aid; 5993 u32 peer_flags; /* see %WMI_PEER_ */ 5994 u16 peer_caps; 5995 u32 peer_listen_intval; 5996 u32 peer_ht_caps; 5997 u32 peer_max_mpdu; 5998 u32 peer_mpdu_density; /* 0..16 */ 5999 u32 peer_rate_caps; /* see %WMI_RC_ */ 6000 struct wmi_rate_set_arg peer_legacy_rates; 6001 struct wmi_rate_set_arg peer_ht_rates; 6002 u32 peer_num_spatial_streams; 6003 u32 peer_vht_caps; 6004 enum wmi_phy_mode peer_phymode; 6005 struct wmi_vht_rate_set_arg peer_vht_rates; 6006 }; 6007 6008 struct wmi_peer_add_wds_entry_cmd { 6009 /* peer MAC address */ 6010 struct wmi_mac_addr peer_macaddr; 6011 /* wds MAC addr */ 6012 struct wmi_mac_addr wds_macaddr; 6013 } __packed; 6014 6015 struct wmi_peer_remove_wds_entry_cmd { 6016 /* wds MAC addr */ 6017 struct wmi_mac_addr wds_macaddr; 6018 } __packed; 6019 6020 struct wmi_peer_q_empty_callback_event { 6021 /* peer MAC address */ 6022 struct wmi_mac_addr peer_macaddr; 6023 } __packed; 6024 6025 /* 6026 * Channel info WMI event 6027 */ 6028 struct wmi_chan_info_event { 6029 __le32 err_code; 6030 __le32 freq; 6031 __le32 cmd_flags; 6032 __le32 noise_floor; 6033 __le32 rx_clear_count; 6034 __le32 cycle_count; 6035 } __packed; 6036 6037 struct wmi_10_4_chan_info_event { 6038 __le32 err_code; 6039 __le32 freq; 6040 __le32 cmd_flags; 6041 __le32 noise_floor; 6042 __le32 rx_clear_count; 6043 __le32 cycle_count; 6044 __le32 chan_tx_pwr_range; 6045 __le32 chan_tx_pwr_tp; 6046 __le32 rx_frame_count; 6047 } __packed; 6048 6049 struct wmi_peer_sta_kickout_event { 6050 struct wmi_mac_addr peer_macaddr; 6051 } __packed; 6052 6053 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0) 6054 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1) 6055 6056 /* Beacon filter wmi command info */ 6057 #define BCN_FLT_MAX_SUPPORTED_IES 256 6058 #define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32) 6059 6060 struct bss_bcn_stats { 6061 __le32 vdev_id; 6062 __le32 bss_bcnsdropped; 6063 __le32 bss_bcnsdelivered; 6064 } __packed; 6065 6066 struct bcn_filter_stats { 6067 __le32 bcns_dropped; 6068 __le32 bcns_delivered; 6069 __le32 activefilters; 6070 struct bss_bcn_stats bss_stats; 6071 } __packed; 6072 6073 struct wmi_add_bcn_filter_cmd { 6074 u32 vdev_id; 6075 u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST]; 6076 } __packed; 6077 6078 enum wmi_sta_keepalive_method { 6079 WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1, 6080 WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2, 6081 }; 6082 6083 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0 6084 6085 /* Firmware crashes if keepalive interval exceeds this limit */ 6086 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff 6087 6088 /* note: ip4 addresses are in network byte order, i.e. big endian */ 6089 struct wmi_sta_keepalive_arp_resp { 6090 __be32 src_ip4_addr; 6091 __be32 dest_ip4_addr; 6092 struct wmi_mac_addr dest_mac_addr; 6093 } __packed; 6094 6095 struct wmi_sta_keepalive_cmd { 6096 __le32 vdev_id; 6097 __le32 enabled; 6098 __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */ 6099 __le32 interval; /* in seconds */ 6100 struct wmi_sta_keepalive_arp_resp arp_resp; 6101 } __packed; 6102 6103 struct wmi_sta_keepalive_arg { 6104 u32 vdev_id; 6105 u32 enabled; 6106 u32 method; 6107 u32 interval; 6108 __be32 src_ip4_addr; 6109 __be32 dest_ip4_addr; 6110 const u8 dest_mac_addr[ETH_ALEN]; 6111 }; 6112 6113 enum wmi_force_fw_hang_type { 6114 WMI_FORCE_FW_HANG_ASSERT = 1, 6115 WMI_FORCE_FW_HANG_NO_DETECT, 6116 WMI_FORCE_FW_HANG_CTRL_EP_FULL, 6117 WMI_FORCE_FW_HANG_EMPTY_POINT, 6118 WMI_FORCE_FW_HANG_STACK_OVERFLOW, 6119 WMI_FORCE_FW_HANG_INFINITE_LOOP, 6120 }; 6121 6122 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF 6123 6124 struct wmi_force_fw_hang_cmd { 6125 __le32 type; 6126 __le32 delay_ms; 6127 } __packed; 6128 6129 enum ath10k_dbglog_level { 6130 ATH10K_DBGLOG_LEVEL_VERBOSE = 0, 6131 ATH10K_DBGLOG_LEVEL_INFO = 1, 6132 ATH10K_DBGLOG_LEVEL_WARN = 2, 6133 ATH10K_DBGLOG_LEVEL_ERR = 3, 6134 }; 6135 6136 /* VAP ids to enable dbglog */ 6137 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0 6138 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff 6139 6140 /* to enable dbglog in the firmware */ 6141 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16 6142 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000 6143 6144 /* timestamp resolution */ 6145 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17 6146 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000 6147 6148 /* number of queued messages before sending them to the host */ 6149 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20 6150 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000 6151 6152 /* 6153 * Log levels to enable. This defines the minimum level to enable, this is 6154 * not a bitmask. See enum ath10k_dbglog_level for the values. 6155 */ 6156 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28 6157 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000 6158 6159 /* 6160 * Note: this is a cleaned up version of a struct firmware uses. For 6161 * example, config_valid was hidden inside an array. 6162 */ 6163 struct wmi_dbglog_cfg_cmd { 6164 /* bitmask to hold mod id config*/ 6165 __le32 module_enable; 6166 6167 /* see ATH10K_DBGLOG_CFG_ */ 6168 __le32 config_enable; 6169 6170 /* mask of module id bits to be changed */ 6171 __le32 module_valid; 6172 6173 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6174 __le32 config_valid; 6175 } __packed; 6176 6177 struct wmi_10_4_dbglog_cfg_cmd { 6178 /* bitmask to hold mod id config*/ 6179 __le64 module_enable; 6180 6181 /* see ATH10K_DBGLOG_CFG_ */ 6182 __le32 config_enable; 6183 6184 /* mask of module id bits to be changed */ 6185 __le64 module_valid; 6186 6187 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6188 __le32 config_valid; 6189 } __packed; 6190 6191 enum wmi_roam_reason { 6192 WMI_ROAM_REASON_BETTER_AP = 1, 6193 WMI_ROAM_REASON_BEACON_MISS = 2, 6194 WMI_ROAM_REASON_LOW_RSSI = 3, 6195 WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4, 6196 WMI_ROAM_REASON_HO_FAILED = 5, 6197 6198 /* keep last */ 6199 WMI_ROAM_REASON_MAX, 6200 }; 6201 6202 struct wmi_roam_ev { 6203 __le32 vdev_id; 6204 __le32 reason; 6205 } __packed; 6206 6207 #define ATH10K_FRAGMT_THRESHOLD_MIN 540 6208 #define ATH10K_FRAGMT_THRESHOLD_MAX 2346 6209 6210 #define WMI_MAX_EVENT 0x1000 6211 /* Maximum number of pending TXed WMI packets */ 6212 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr) 6213 6214 /* By default disable power save for IBSS */ 6215 #define ATH10K_DEFAULT_ATIM 0 6216 6217 #define WMI_MAX_MEM_REQS 16 6218 6219 struct wmi_scan_ev_arg { 6220 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 6221 __le32 reason; /* %WMI_SCAN_REASON_ */ 6222 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 6223 __le32 scan_req_id; 6224 __le32 scan_id; 6225 __le32 vdev_id; 6226 }; 6227 6228 struct wmi_mgmt_rx_ev_arg { 6229 __le32 channel; 6230 __le32 snr; 6231 __le32 rate; 6232 __le32 phy_mode; 6233 __le32 buf_len; 6234 __le32 status; /* %WMI_RX_STATUS_ */ 6235 struct wmi_mgmt_rx_ext_info ext_info; 6236 }; 6237 6238 struct wmi_ch_info_ev_arg { 6239 __le32 err_code; 6240 __le32 freq; 6241 __le32 cmd_flags; 6242 __le32 noise_floor; 6243 __le32 rx_clear_count; 6244 __le32 cycle_count; 6245 __le32 chan_tx_pwr_range; 6246 __le32 chan_tx_pwr_tp; 6247 __le32 rx_frame_count; 6248 }; 6249 6250 struct wmi_vdev_start_ev_arg { 6251 __le32 vdev_id; 6252 __le32 req_id; 6253 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 6254 __le32 status; 6255 }; 6256 6257 struct wmi_peer_kick_ev_arg { 6258 const u8 *mac_addr; 6259 }; 6260 6261 struct wmi_swba_ev_arg { 6262 __le32 vdev_map; 6263 struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV]; 6264 const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV]; 6265 }; 6266 6267 struct wmi_phyerr_ev_arg { 6268 u32 tsf_timestamp; 6269 u16 freq1; 6270 u16 freq2; 6271 u8 rssi_combined; 6272 u8 chan_width_mhz; 6273 u8 phy_err_code; 6274 u16 nf_chains[4]; 6275 u32 buf_len; 6276 const u8 *buf; 6277 u8 hdr_len; 6278 }; 6279 6280 struct wmi_phyerr_hdr_arg { 6281 u32 num_phyerrs; 6282 u32 tsf_l32; 6283 u32 tsf_u32; 6284 u32 buf_len; 6285 const void *phyerrs; 6286 }; 6287 6288 struct wmi_svc_rdy_ev_arg { 6289 __le32 min_tx_power; 6290 __le32 max_tx_power; 6291 __le32 ht_cap; 6292 __le32 vht_cap; 6293 __le32 sw_ver0; 6294 __le32 sw_ver1; 6295 __le32 fw_build; 6296 __le32 phy_capab; 6297 __le32 num_rf_chains; 6298 __le32 eeprom_rd; 6299 __le32 num_mem_reqs; 6300 const __le32 *service_map; 6301 size_t service_map_len; 6302 const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS]; 6303 }; 6304 6305 struct wmi_rdy_ev_arg { 6306 __le32 sw_version; 6307 __le32 abi_version; 6308 __le32 status; 6309 const u8 *mac_addr; 6310 }; 6311 6312 struct wmi_roam_ev_arg { 6313 __le32 vdev_id; 6314 __le32 reason; 6315 __le32 rssi; 6316 }; 6317 6318 struct wmi_echo_ev_arg { 6319 __le32 value; 6320 }; 6321 6322 struct wmi_pdev_temperature_event { 6323 /* temperature value in Celcius degree */ 6324 __le32 temperature; 6325 } __packed; 6326 6327 struct wmi_pdev_bss_chan_info_event { 6328 __le32 freq; 6329 __le32 noise_floor; 6330 __le64 cycle_busy; 6331 __le64 cycle_total; 6332 __le64 cycle_tx; 6333 __le64 cycle_rx; 6334 __le64 cycle_rx_bss; 6335 __le32 reserved; 6336 } __packed; 6337 6338 /* WOW structures */ 6339 enum wmi_wow_wakeup_event { 6340 WOW_BMISS_EVENT = 0, 6341 WOW_BETTER_AP_EVENT, 6342 WOW_DEAUTH_RECVD_EVENT, 6343 WOW_MAGIC_PKT_RECVD_EVENT, 6344 WOW_GTK_ERR_EVENT, 6345 WOW_FOURWAY_HSHAKE_EVENT, 6346 WOW_EAPOL_RECVD_EVENT, 6347 WOW_NLO_DETECTED_EVENT, 6348 WOW_DISASSOC_RECVD_EVENT, 6349 WOW_PATTERN_MATCH_EVENT, 6350 WOW_CSA_IE_EVENT, 6351 WOW_PROBE_REQ_WPS_IE_EVENT, 6352 WOW_AUTH_REQ_EVENT, 6353 WOW_ASSOC_REQ_EVENT, 6354 WOW_HTT_EVENT, 6355 WOW_RA_MATCH_EVENT, 6356 WOW_HOST_AUTO_SHUTDOWN_EVENT, 6357 WOW_IOAC_MAGIC_EVENT, 6358 WOW_IOAC_SHORT_EVENT, 6359 WOW_IOAC_EXTEND_EVENT, 6360 WOW_IOAC_TIMER_EVENT, 6361 WOW_DFS_PHYERR_RADAR_EVENT, 6362 WOW_BEACON_EVENT, 6363 WOW_CLIENT_KICKOUT_EVENT, 6364 WOW_EVENT_MAX, 6365 }; 6366 6367 #define C2S(x) case x: return #x 6368 6369 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev) 6370 { 6371 switch (ev) { 6372 C2S(WOW_BMISS_EVENT); 6373 C2S(WOW_BETTER_AP_EVENT); 6374 C2S(WOW_DEAUTH_RECVD_EVENT); 6375 C2S(WOW_MAGIC_PKT_RECVD_EVENT); 6376 C2S(WOW_GTK_ERR_EVENT); 6377 C2S(WOW_FOURWAY_HSHAKE_EVENT); 6378 C2S(WOW_EAPOL_RECVD_EVENT); 6379 C2S(WOW_NLO_DETECTED_EVENT); 6380 C2S(WOW_DISASSOC_RECVD_EVENT); 6381 C2S(WOW_PATTERN_MATCH_EVENT); 6382 C2S(WOW_CSA_IE_EVENT); 6383 C2S(WOW_PROBE_REQ_WPS_IE_EVENT); 6384 C2S(WOW_AUTH_REQ_EVENT); 6385 C2S(WOW_ASSOC_REQ_EVENT); 6386 C2S(WOW_HTT_EVENT); 6387 C2S(WOW_RA_MATCH_EVENT); 6388 C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT); 6389 C2S(WOW_IOAC_MAGIC_EVENT); 6390 C2S(WOW_IOAC_SHORT_EVENT); 6391 C2S(WOW_IOAC_EXTEND_EVENT); 6392 C2S(WOW_IOAC_TIMER_EVENT); 6393 C2S(WOW_DFS_PHYERR_RADAR_EVENT); 6394 C2S(WOW_BEACON_EVENT); 6395 C2S(WOW_CLIENT_KICKOUT_EVENT); 6396 C2S(WOW_EVENT_MAX); 6397 default: 6398 return NULL; 6399 } 6400 } 6401 6402 enum wmi_wow_wake_reason { 6403 WOW_REASON_UNSPECIFIED = -1, 6404 WOW_REASON_NLOD = 0, 6405 WOW_REASON_AP_ASSOC_LOST, 6406 WOW_REASON_LOW_RSSI, 6407 WOW_REASON_DEAUTH_RECVD, 6408 WOW_REASON_DISASSOC_RECVD, 6409 WOW_REASON_GTK_HS_ERR, 6410 WOW_REASON_EAP_REQ, 6411 WOW_REASON_FOURWAY_HS_RECV, 6412 WOW_REASON_TIMER_INTR_RECV, 6413 WOW_REASON_PATTERN_MATCH_FOUND, 6414 WOW_REASON_RECV_MAGIC_PATTERN, 6415 WOW_REASON_P2P_DISC, 6416 WOW_REASON_WLAN_HB, 6417 WOW_REASON_CSA_EVENT, 6418 WOW_REASON_PROBE_REQ_WPS_IE_RECV, 6419 WOW_REASON_AUTH_REQ_RECV, 6420 WOW_REASON_ASSOC_REQ_RECV, 6421 WOW_REASON_HTT_EVENT, 6422 WOW_REASON_RA_MATCH, 6423 WOW_REASON_HOST_AUTO_SHUTDOWN, 6424 WOW_REASON_IOAC_MAGIC_EVENT, 6425 WOW_REASON_IOAC_SHORT_EVENT, 6426 WOW_REASON_IOAC_EXTEND_EVENT, 6427 WOW_REASON_IOAC_TIMER_EVENT, 6428 WOW_REASON_ROAM_HO, 6429 WOW_REASON_DFS_PHYERR_RADADR_EVENT, 6430 WOW_REASON_BEACON_RECV, 6431 WOW_REASON_CLIENT_KICKOUT_EVENT, 6432 WOW_REASON_DEBUG_TEST = 0xFF, 6433 }; 6434 6435 static inline const char *wow_reason(enum wmi_wow_wake_reason reason) 6436 { 6437 switch (reason) { 6438 C2S(WOW_REASON_UNSPECIFIED); 6439 C2S(WOW_REASON_NLOD); 6440 C2S(WOW_REASON_AP_ASSOC_LOST); 6441 C2S(WOW_REASON_LOW_RSSI); 6442 C2S(WOW_REASON_DEAUTH_RECVD); 6443 C2S(WOW_REASON_DISASSOC_RECVD); 6444 C2S(WOW_REASON_GTK_HS_ERR); 6445 C2S(WOW_REASON_EAP_REQ); 6446 C2S(WOW_REASON_FOURWAY_HS_RECV); 6447 C2S(WOW_REASON_TIMER_INTR_RECV); 6448 C2S(WOW_REASON_PATTERN_MATCH_FOUND); 6449 C2S(WOW_REASON_RECV_MAGIC_PATTERN); 6450 C2S(WOW_REASON_P2P_DISC); 6451 C2S(WOW_REASON_WLAN_HB); 6452 C2S(WOW_REASON_CSA_EVENT); 6453 C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV); 6454 C2S(WOW_REASON_AUTH_REQ_RECV); 6455 C2S(WOW_REASON_ASSOC_REQ_RECV); 6456 C2S(WOW_REASON_HTT_EVENT); 6457 C2S(WOW_REASON_RA_MATCH); 6458 C2S(WOW_REASON_HOST_AUTO_SHUTDOWN); 6459 C2S(WOW_REASON_IOAC_MAGIC_EVENT); 6460 C2S(WOW_REASON_IOAC_SHORT_EVENT); 6461 C2S(WOW_REASON_IOAC_EXTEND_EVENT); 6462 C2S(WOW_REASON_IOAC_TIMER_EVENT); 6463 C2S(WOW_REASON_ROAM_HO); 6464 C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT); 6465 C2S(WOW_REASON_BEACON_RECV); 6466 C2S(WOW_REASON_CLIENT_KICKOUT_EVENT); 6467 C2S(WOW_REASON_DEBUG_TEST); 6468 default: 6469 return NULL; 6470 } 6471 } 6472 6473 #undef C2S 6474 6475 struct wmi_wow_ev_arg { 6476 u32 vdev_id; 6477 u32 flag; 6478 enum wmi_wow_wake_reason wake_reason; 6479 u32 data_len; 6480 }; 6481 6482 #define WOW_MIN_PATTERN_SIZE 1 6483 #define WOW_MAX_PATTERN_SIZE 148 6484 #define WOW_MAX_PKT_OFFSET 128 6485 6486 enum wmi_tdls_state { 6487 WMI_TDLS_DISABLE, 6488 WMI_TDLS_ENABLE_PASSIVE, 6489 WMI_TDLS_ENABLE_ACTIVE, 6490 }; 6491 6492 enum wmi_tdls_peer_state { 6493 WMI_TDLS_PEER_STATE_PEERING, 6494 WMI_TDLS_PEER_STATE_CONNECTED, 6495 WMI_TDLS_PEER_STATE_TEARDOWN, 6496 }; 6497 6498 struct wmi_tdls_peer_update_cmd_arg { 6499 u32 vdev_id; 6500 enum wmi_tdls_peer_state peer_state; 6501 u8 addr[ETH_ALEN]; 6502 }; 6503 6504 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32 6505 6506 struct wmi_tdls_peer_capab_arg { 6507 u8 peer_uapsd_queues; 6508 u8 peer_max_sp; 6509 u32 buff_sta_support; 6510 u32 off_chan_support; 6511 u32 peer_curr_operclass; 6512 u32 self_curr_operclass; 6513 u32 peer_chan_len; 6514 u32 peer_operclass_len; 6515 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 6516 u32 is_peer_responder; 6517 u32 pref_offchan_num; 6518 u32 pref_offchan_bw; 6519 }; 6520 6521 enum wmi_txbf_conf { 6522 WMI_TXBF_CONF_UNSUPPORTED, 6523 WMI_TXBF_CONF_BEFORE_ASSOC, 6524 WMI_TXBF_CONF_AFTER_ASSOC, 6525 }; 6526 6527 #define WMI_CCA_DETECT_LEVEL_AUTO 0 6528 #define WMI_CCA_DETECT_MARGIN_AUTO 0 6529 6530 struct wmi_pdev_set_adaptive_cca_params { 6531 __le32 enable; 6532 __le32 cca_detect_level; 6533 __le32 cca_detect_margin; 6534 } __packed; 6535 6536 enum wmi_host_platform_type { 6537 WMI_HOST_PLATFORM_HIGH_PERF, 6538 WMI_HOST_PLATFORM_LOW_PERF, 6539 }; 6540 6541 enum wmi_bss_survey_req_type { 6542 WMI_BSS_SURVEY_REQ_TYPE_READ = 1, 6543 WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR, 6544 }; 6545 6546 struct wmi_pdev_chan_info_req_cmd { 6547 __le32 type; 6548 __le32 reserved; 6549 } __packed; 6550 6551 struct ath10k; 6552 struct ath10k_vif; 6553 struct ath10k_fw_stats_pdev; 6554 struct ath10k_fw_stats_peer; 6555 struct ath10k_fw_stats; 6556 6557 int ath10k_wmi_attach(struct ath10k *ar); 6558 void ath10k_wmi_detach(struct ath10k *ar); 6559 void ath10k_wmi_free_host_mem(struct ath10k *ar); 6560 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar); 6561 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar); 6562 6563 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 6564 int ath10k_wmi_connect(struct ath10k *ar); 6565 6566 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 6567 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); 6568 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb, 6569 u32 cmd_id); 6570 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *); 6571 6572 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src, 6573 struct ath10k_fw_stats_pdev *dst); 6574 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src, 6575 struct ath10k_fw_stats_pdev *dst); 6576 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src, 6577 struct ath10k_fw_stats_pdev *dst); 6578 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src, 6579 struct ath10k_fw_stats_pdev *dst); 6580 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src, 6581 struct ath10k_fw_stats_peer *dst); 6582 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar, 6583 struct wmi_host_mem_chunks *chunks); 6584 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn, 6585 const struct wmi_start_scan_arg *arg); 6586 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params, 6587 const struct wmi_wmm_params_arg *arg); 6588 void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch, 6589 const struct wmi_channel_arg *arg); 6590 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg); 6591 6592 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb); 6593 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb); 6594 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb); 6595 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb); 6596 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb); 6597 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb); 6598 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb); 6599 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb); 6600 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb); 6601 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb); 6602 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb); 6603 void ath10k_wmi_event_dfs(struct ath10k *ar, 6604 struct wmi_phyerr_ev_arg *phyerr, u64 tsf); 6605 void ath10k_wmi_event_spectral_scan(struct ath10k *ar, 6606 struct wmi_phyerr_ev_arg *phyerr, 6607 u64 tsf); 6608 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb); 6609 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb); 6610 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb); 6611 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb); 6612 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb); 6613 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb); 6614 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar, 6615 struct sk_buff *skb); 6616 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar, 6617 struct sk_buff *skb); 6618 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb); 6619 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb); 6620 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb); 6621 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb); 6622 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb); 6623 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar, 6624 struct sk_buff *skb); 6625 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb); 6626 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb); 6627 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb); 6628 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar, 6629 struct sk_buff *skb); 6630 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb); 6631 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb); 6632 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb); 6633 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb); 6634 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb); 6635 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf, 6636 int left_len, struct wmi_phyerr_ev_arg *arg); 6637 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar, 6638 struct ath10k_fw_stats *fw_stats, 6639 char *buf); 6640 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar, 6641 struct ath10k_fw_stats *fw_stats, 6642 char *buf); 6643 size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head); 6644 size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head); 6645 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar, 6646 struct ath10k_fw_stats *fw_stats, 6647 char *buf); 6648 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar, 6649 enum wmi_vdev_subtype subtype); 6650 int ath10k_wmi_barrier(struct ath10k *ar); 6651 6652 #endif /* _WMI_H_ */ 6653