1 /* SPDX-License-Identifier: ISC */ 2 /* 3 * Copyright (c) 2005-2011 Atheros Communications Inc. 4 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. 5 * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. 6 */ 7 8 #ifndef _WMI_H_ 9 #define _WMI_H_ 10 11 #include <linux/types.h> 12 #include <linux/ieee80211.h> 13 14 /* 15 * This file specifies the WMI interface for the Unified Software 16 * Architecture. 17 * 18 * It includes definitions of all the commands and events. Commands are 19 * messages from the host to the target. Events and Replies are messages 20 * from the target to the host. 21 * 22 * Ownership of correctness in regards to WMI commands belongs to the host 23 * driver and the target is not required to validate parameters for value, 24 * proper range, or any other checking. 25 * 26 * Guidelines for extending this interface are below. 27 * 28 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff 29 * 30 * 2. Use ONLY u32 type for defining member variables within WMI 31 * command/event structures. Do not use u8, u16, bool or 32 * enum types within these structures. 33 * 34 * 3. DO NOT define bit fields within structures. Implement bit fields 35 * using masks if necessary. Do not use the programming language's bit 36 * field definition. 37 * 38 * 4. Define macros for encode/decode of u8, u16 fields within 39 * the u32 variables. Use these macros for set/get of these fields. 40 * Try to use this to optimize the structure without bloating it with 41 * u32 variables for every lower sized field. 42 * 43 * 5. Do not use PACK/UNPACK attributes for the structures as each member 44 * variable is already 4-byte aligned by virtue of being a u32 45 * type. 46 * 47 * 6. Comment each parameter part of the WMI command/event structure by 48 * using the 2 stars at the beginning of C comment instead of one star to 49 * enable HTML document generation using Doxygen. 50 * 51 */ 52 53 /* Control Path */ 54 struct wmi_cmd_hdr { 55 __le32 cmd_id; 56 } __packed; 57 58 #define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF 59 #define WMI_CMD_HDR_CMD_ID_LSB 0 60 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000 61 #define WMI_CMD_HDR_PLT_PRIV_LSB 24 62 63 #define HTC_PROTOCOL_VERSION 0x0002 64 #define WMI_PROTOCOL_VERSION 0x0002 65 66 /* 67 * There is no signed version of __le32, so for a temporary solution come 68 * up with our own version. The idea is from fs/ntfs/endian.h. 69 * 70 * Use a_ prefix so that it doesn't conflict if we get proper support to 71 * linux/types.h. 72 */ 73 typedef __s32 __bitwise a_sle32; 74 75 static inline a_sle32 a_cpu_to_sle32(s32 val) 76 { 77 return (__force a_sle32)cpu_to_le32(val); 78 } 79 80 static inline s32 a_sle32_to_cpu(a_sle32 val) 81 { 82 return le32_to_cpu((__force __le32)val); 83 } 84 85 enum wmi_service { 86 WMI_SERVICE_BEACON_OFFLOAD = 0, 87 WMI_SERVICE_SCAN_OFFLOAD, 88 WMI_SERVICE_ROAM_OFFLOAD, 89 WMI_SERVICE_BCN_MISS_OFFLOAD, 90 WMI_SERVICE_STA_PWRSAVE, 91 WMI_SERVICE_STA_ADVANCED_PWRSAVE, 92 WMI_SERVICE_AP_UAPSD, 93 WMI_SERVICE_AP_DFS, 94 WMI_SERVICE_11AC, 95 WMI_SERVICE_BLOCKACK, 96 WMI_SERVICE_PHYERR, 97 WMI_SERVICE_BCN_FILTER, 98 WMI_SERVICE_RTT, 99 WMI_SERVICE_RATECTRL, 100 WMI_SERVICE_WOW, 101 WMI_SERVICE_RATECTRL_CACHE, 102 WMI_SERVICE_IRAM_TIDS, 103 WMI_SERVICE_ARPNS_OFFLOAD, 104 WMI_SERVICE_NLO, 105 WMI_SERVICE_GTK_OFFLOAD, 106 WMI_SERVICE_SCAN_SCH, 107 WMI_SERVICE_CSA_OFFLOAD, 108 WMI_SERVICE_CHATTER, 109 WMI_SERVICE_COEX_FREQAVOID, 110 WMI_SERVICE_PACKET_POWER_SAVE, 111 WMI_SERVICE_FORCE_FW_HANG, 112 WMI_SERVICE_GPIO, 113 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 114 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 115 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 116 WMI_SERVICE_STA_KEEP_ALIVE, 117 WMI_SERVICE_TX_ENCAP, 118 WMI_SERVICE_BURST, 119 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, 120 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, 121 WMI_SERVICE_ROAM_SCAN_OFFLOAD, 122 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 123 WMI_SERVICE_EARLY_RX, 124 WMI_SERVICE_STA_SMPS, 125 WMI_SERVICE_FWTEST, 126 WMI_SERVICE_STA_WMMAC, 127 WMI_SERVICE_TDLS, 128 WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE, 129 WMI_SERVICE_ADAPTIVE_OCS, 130 WMI_SERVICE_BA_SSN_SUPPORT, 131 WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE, 132 WMI_SERVICE_WLAN_HB, 133 WMI_SERVICE_LTE_ANT_SHARE_SUPPORT, 134 WMI_SERVICE_BATCH_SCAN, 135 WMI_SERVICE_QPOWER, 136 WMI_SERVICE_PLMREQ, 137 WMI_SERVICE_THERMAL_MGMT, 138 WMI_SERVICE_RMC, 139 WMI_SERVICE_MHF_OFFLOAD, 140 WMI_SERVICE_COEX_SAR, 141 WMI_SERVICE_BCN_TXRATE_OVERRIDE, 142 WMI_SERVICE_NAN, 143 WMI_SERVICE_L1SS_STAT, 144 WMI_SERVICE_ESTIMATE_LINKSPEED, 145 WMI_SERVICE_OBSS_SCAN, 146 WMI_SERVICE_TDLS_OFFCHAN, 147 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, 148 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, 149 WMI_SERVICE_IBSS_PWRSAVE, 150 WMI_SERVICE_LPASS, 151 WMI_SERVICE_EXTSCAN, 152 WMI_SERVICE_D0WOW, 153 WMI_SERVICE_HSOFFLOAD, 154 WMI_SERVICE_ROAM_HO_OFFLOAD, 155 WMI_SERVICE_RX_FULL_REORDER, 156 WMI_SERVICE_DHCP_OFFLOAD, 157 WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT, 158 WMI_SERVICE_MDNS_OFFLOAD, 159 WMI_SERVICE_SAP_AUTH_OFFLOAD, 160 WMI_SERVICE_ATF, 161 WMI_SERVICE_COEX_GPIO, 162 WMI_SERVICE_ENHANCED_PROXY_STA, 163 WMI_SERVICE_TT, 164 WMI_SERVICE_PEER_CACHING, 165 WMI_SERVICE_AUX_SPECTRAL_INTF, 166 WMI_SERVICE_AUX_CHAN_LOAD_INTF, 167 WMI_SERVICE_BSS_CHANNEL_INFO_64, 168 WMI_SERVICE_EXT_RES_CFG_SUPPORT, 169 WMI_SERVICE_MESH_11S, 170 WMI_SERVICE_MESH_NON_11S, 171 WMI_SERVICE_PEER_STATS, 172 WMI_SERVICE_RESTRT_CHNL_SUPPORT, 173 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 174 WMI_SERVICE_TX_MODE_PUSH_ONLY, 175 WMI_SERVICE_TX_MODE_PUSH_PULL, 176 WMI_SERVICE_TX_MODE_DYNAMIC, 177 WMI_SERVICE_VDEV_RX_FILTER, 178 WMI_SERVICE_BTCOEX, 179 WMI_SERVICE_CHECK_CAL_VERSION, 180 WMI_SERVICE_DBGLOG_WARN2, 181 WMI_SERVICE_BTCOEX_DUTY_CYCLE, 182 WMI_SERVICE_4_WIRE_COEX_SUPPORT, 183 WMI_SERVICE_EXTENDED_NSS_SUPPORT, 184 WMI_SERVICE_PROG_GPIO_BAND_SELECT, 185 WMI_SERVICE_SMART_LOGGING_SUPPORT, 186 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 187 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 188 WMI_SERVICE_MGMT_TX_WMI, 189 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, 190 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 191 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, 192 WMI_SERVICE_TPC_STATS_FINAL, 193 WMI_SERVICE_RESET_CHIP, 194 WMI_SERVICE_SPOOF_MAC_SUPPORT, 195 WMI_SERVICE_TX_DATA_ACK_RSSI, 196 WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, 197 WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, 198 WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, 199 WMI_SERVICE_THERM_THROT, 200 WMI_SERVICE_RTT_RESPONDER_ROLE, 201 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, 202 WMI_SERVICE_REPORT_AIRTIME, 203 WMI_SERVICE_SYNC_DELETE_CMDS, 204 WMI_SERVICE_TX_PWR_PER_PEER, 205 WMI_SERVICE_SUPPORT_EXTEND_ADDRESS, 206 207 /* Remember to add the new value to wmi_service_name()! */ 208 209 /* keep last */ 210 WMI_SERVICE_MAX, 211 }; 212 213 enum wmi_10x_service { 214 WMI_10X_SERVICE_BEACON_OFFLOAD = 0, 215 WMI_10X_SERVICE_SCAN_OFFLOAD, 216 WMI_10X_SERVICE_ROAM_OFFLOAD, 217 WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 218 WMI_10X_SERVICE_STA_PWRSAVE, 219 WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 220 WMI_10X_SERVICE_AP_UAPSD, 221 WMI_10X_SERVICE_AP_DFS, 222 WMI_10X_SERVICE_11AC, 223 WMI_10X_SERVICE_BLOCKACK, 224 WMI_10X_SERVICE_PHYERR, 225 WMI_10X_SERVICE_BCN_FILTER, 226 WMI_10X_SERVICE_RTT, 227 WMI_10X_SERVICE_RATECTRL, 228 WMI_10X_SERVICE_WOW, 229 WMI_10X_SERVICE_RATECTRL_CACHE, 230 WMI_10X_SERVICE_IRAM_TIDS, 231 WMI_10X_SERVICE_BURST, 232 233 /* introduced in 10.2 */ 234 WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 235 WMI_10X_SERVICE_FORCE_FW_HANG, 236 WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 237 WMI_10X_SERVICE_ATF, 238 WMI_10X_SERVICE_COEX_GPIO, 239 WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 240 WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 241 WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 242 WMI_10X_SERVICE_MESH, 243 WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 244 WMI_10X_SERVICE_PEER_STATS, 245 WMI_10X_SERVICE_RESET_CHIP, 246 WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 247 WMI_10X_SERVICE_VDEV_BCN_RATE_CONTROL, 248 WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT, 249 WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT, 250 }; 251 252 enum wmi_main_service { 253 WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0, 254 WMI_MAIN_SERVICE_SCAN_OFFLOAD, 255 WMI_MAIN_SERVICE_ROAM_OFFLOAD, 256 WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 257 WMI_MAIN_SERVICE_STA_PWRSAVE, 258 WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 259 WMI_MAIN_SERVICE_AP_UAPSD, 260 WMI_MAIN_SERVICE_AP_DFS, 261 WMI_MAIN_SERVICE_11AC, 262 WMI_MAIN_SERVICE_BLOCKACK, 263 WMI_MAIN_SERVICE_PHYERR, 264 WMI_MAIN_SERVICE_BCN_FILTER, 265 WMI_MAIN_SERVICE_RTT, 266 WMI_MAIN_SERVICE_RATECTRL, 267 WMI_MAIN_SERVICE_WOW, 268 WMI_MAIN_SERVICE_RATECTRL_CACHE, 269 WMI_MAIN_SERVICE_IRAM_TIDS, 270 WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 271 WMI_MAIN_SERVICE_NLO, 272 WMI_MAIN_SERVICE_GTK_OFFLOAD, 273 WMI_MAIN_SERVICE_SCAN_SCH, 274 WMI_MAIN_SERVICE_CSA_OFFLOAD, 275 WMI_MAIN_SERVICE_CHATTER, 276 WMI_MAIN_SERVICE_COEX_FREQAVOID, 277 WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 278 WMI_MAIN_SERVICE_FORCE_FW_HANG, 279 WMI_MAIN_SERVICE_GPIO, 280 WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 281 WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 282 WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 283 WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 284 WMI_MAIN_SERVICE_TX_ENCAP, 285 }; 286 287 enum wmi_10_4_service { 288 WMI_10_4_SERVICE_BEACON_OFFLOAD = 0, 289 WMI_10_4_SERVICE_SCAN_OFFLOAD, 290 WMI_10_4_SERVICE_ROAM_OFFLOAD, 291 WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 292 WMI_10_4_SERVICE_STA_PWRSAVE, 293 WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 294 WMI_10_4_SERVICE_AP_UAPSD, 295 WMI_10_4_SERVICE_AP_DFS, 296 WMI_10_4_SERVICE_11AC, 297 WMI_10_4_SERVICE_BLOCKACK, 298 WMI_10_4_SERVICE_PHYERR, 299 WMI_10_4_SERVICE_BCN_FILTER, 300 WMI_10_4_SERVICE_RTT, 301 WMI_10_4_SERVICE_RATECTRL, 302 WMI_10_4_SERVICE_WOW, 303 WMI_10_4_SERVICE_RATECTRL_CACHE, 304 WMI_10_4_SERVICE_IRAM_TIDS, 305 WMI_10_4_SERVICE_BURST, 306 WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 307 WMI_10_4_SERVICE_GTK_OFFLOAD, 308 WMI_10_4_SERVICE_SCAN_SCH, 309 WMI_10_4_SERVICE_CSA_OFFLOAD, 310 WMI_10_4_SERVICE_CHATTER, 311 WMI_10_4_SERVICE_COEX_FREQAVOID, 312 WMI_10_4_SERVICE_PACKET_POWER_SAVE, 313 WMI_10_4_SERVICE_FORCE_FW_HANG, 314 WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 315 WMI_10_4_SERVICE_GPIO, 316 WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 317 WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 318 WMI_10_4_SERVICE_STA_KEEP_ALIVE, 319 WMI_10_4_SERVICE_TX_ENCAP, 320 WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 321 WMI_10_4_SERVICE_EARLY_RX, 322 WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 323 WMI_10_4_SERVICE_TT, 324 WMI_10_4_SERVICE_ATF, 325 WMI_10_4_SERVICE_PEER_CACHING, 326 WMI_10_4_SERVICE_COEX_GPIO, 327 WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 328 WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 329 WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 330 WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 331 WMI_10_4_SERVICE_MESH_NON_11S, 332 WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 333 WMI_10_4_SERVICE_PEER_STATS, 334 WMI_10_4_SERVICE_MESH_11S, 335 WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 336 WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 337 WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 338 WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 339 WMI_10_4_SERVICE_VDEV_RX_FILTER, 340 WMI_10_4_SERVICE_BTCOEX, 341 WMI_10_4_SERVICE_CHECK_CAL_VERSION, 342 WMI_10_4_SERVICE_DBGLOG_WARN2, 343 WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, 344 WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, 345 WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, 346 WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, 347 WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, 348 WMI_10_4_SERVICE_TDLS, 349 WMI_10_4_SERVICE_TDLS_OFFCHAN, 350 WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, 351 WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, 352 WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 353 WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 354 WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, 355 WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 356 WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, 357 WMI_10_4_SERVICE_TPC_STATS_FINAL, 358 WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT, 359 WMI_10_4_SERVICE_TX_DATA_ACK_RSSI, 360 WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY, 361 WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT, 362 WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT, 363 WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL, 364 WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, 365 WMI_10_4_SERVICE_HTT_ASSERT_TRIGGER_SUPPORT, 366 WMI_10_4_SERVICE_VDEV_FILTER_NEIGHBOR_RX_PACKETS, 367 WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, 368 WMI_10_4_SERVICE_PEER_CHWIDTH_CHANGE, 369 WMI_10_4_SERVICE_RX_FILTER_OUT_COUNT, 370 WMI_10_4_SERVICE_RTT_RESPONDER_ROLE, 371 WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT, 372 WMI_10_4_SERVICE_REPORT_AIRTIME, 373 WMI_10_4_SERVICE_TX_PWR_PER_PEER, 374 WMI_10_4_SERVICE_FETCH_PEER_TX_PN, 375 WMI_10_4_SERVICE_MULTIPLE_VDEV_RESTART, 376 WMI_10_4_SERVICE_ENHANCED_RADIO_COUNTERS, 377 WMI_10_4_SERVICE_QINQ_SUPPORT, 378 WMI_10_4_SERVICE_RESET_CHIP, 379 }; 380 381 static inline char *wmi_service_name(enum wmi_service service_id) 382 { 383 #define SVCSTR(x) case x: return #x 384 385 switch (service_id) { 386 SVCSTR(WMI_SERVICE_BEACON_OFFLOAD); 387 SVCSTR(WMI_SERVICE_SCAN_OFFLOAD); 388 SVCSTR(WMI_SERVICE_ROAM_OFFLOAD); 389 SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD); 390 SVCSTR(WMI_SERVICE_STA_PWRSAVE); 391 SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE); 392 SVCSTR(WMI_SERVICE_AP_UAPSD); 393 SVCSTR(WMI_SERVICE_AP_DFS); 394 SVCSTR(WMI_SERVICE_11AC); 395 SVCSTR(WMI_SERVICE_BLOCKACK); 396 SVCSTR(WMI_SERVICE_PHYERR); 397 SVCSTR(WMI_SERVICE_BCN_FILTER); 398 SVCSTR(WMI_SERVICE_RTT); 399 SVCSTR(WMI_SERVICE_RATECTRL); 400 SVCSTR(WMI_SERVICE_WOW); 401 SVCSTR(WMI_SERVICE_RATECTRL_CACHE); 402 SVCSTR(WMI_SERVICE_IRAM_TIDS); 403 SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD); 404 SVCSTR(WMI_SERVICE_NLO); 405 SVCSTR(WMI_SERVICE_GTK_OFFLOAD); 406 SVCSTR(WMI_SERVICE_SCAN_SCH); 407 SVCSTR(WMI_SERVICE_CSA_OFFLOAD); 408 SVCSTR(WMI_SERVICE_CHATTER); 409 SVCSTR(WMI_SERVICE_COEX_FREQAVOID); 410 SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE); 411 SVCSTR(WMI_SERVICE_FORCE_FW_HANG); 412 SVCSTR(WMI_SERVICE_GPIO); 413 SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM); 414 SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG); 415 SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG); 416 SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE); 417 SVCSTR(WMI_SERVICE_TX_ENCAP); 418 SVCSTR(WMI_SERVICE_BURST); 419 SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT); 420 SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT); 421 SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD); 422 SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC); 423 SVCSTR(WMI_SERVICE_EARLY_RX); 424 SVCSTR(WMI_SERVICE_STA_SMPS); 425 SVCSTR(WMI_SERVICE_FWTEST); 426 SVCSTR(WMI_SERVICE_STA_WMMAC); 427 SVCSTR(WMI_SERVICE_TDLS); 428 SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE); 429 SVCSTR(WMI_SERVICE_ADAPTIVE_OCS); 430 SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT); 431 SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE); 432 SVCSTR(WMI_SERVICE_WLAN_HB); 433 SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT); 434 SVCSTR(WMI_SERVICE_BATCH_SCAN); 435 SVCSTR(WMI_SERVICE_QPOWER); 436 SVCSTR(WMI_SERVICE_PLMREQ); 437 SVCSTR(WMI_SERVICE_THERMAL_MGMT); 438 SVCSTR(WMI_SERVICE_RMC); 439 SVCSTR(WMI_SERVICE_MHF_OFFLOAD); 440 SVCSTR(WMI_SERVICE_COEX_SAR); 441 SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE); 442 SVCSTR(WMI_SERVICE_NAN); 443 SVCSTR(WMI_SERVICE_L1SS_STAT); 444 SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED); 445 SVCSTR(WMI_SERVICE_OBSS_SCAN); 446 SVCSTR(WMI_SERVICE_TDLS_OFFCHAN); 447 SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA); 448 SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA); 449 SVCSTR(WMI_SERVICE_IBSS_PWRSAVE); 450 SVCSTR(WMI_SERVICE_LPASS); 451 SVCSTR(WMI_SERVICE_EXTSCAN); 452 SVCSTR(WMI_SERVICE_D0WOW); 453 SVCSTR(WMI_SERVICE_HSOFFLOAD); 454 SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD); 455 SVCSTR(WMI_SERVICE_RX_FULL_REORDER); 456 SVCSTR(WMI_SERVICE_DHCP_OFFLOAD); 457 SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT); 458 SVCSTR(WMI_SERVICE_MDNS_OFFLOAD); 459 SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD); 460 SVCSTR(WMI_SERVICE_ATF); 461 SVCSTR(WMI_SERVICE_COEX_GPIO); 462 SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA); 463 SVCSTR(WMI_SERVICE_TT); 464 SVCSTR(WMI_SERVICE_PEER_CACHING); 465 SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF); 466 SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF); 467 SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64); 468 SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT); 469 SVCSTR(WMI_SERVICE_MESH_11S); 470 SVCSTR(WMI_SERVICE_MESH_NON_11S); 471 SVCSTR(WMI_SERVICE_PEER_STATS); 472 SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT); 473 SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT); 474 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY); 475 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL); 476 SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC); 477 SVCSTR(WMI_SERVICE_VDEV_RX_FILTER); 478 SVCSTR(WMI_SERVICE_BTCOEX); 479 SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION); 480 SVCSTR(WMI_SERVICE_DBGLOG_WARN2); 481 SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE); 482 SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT); 483 SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT); 484 SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT); 485 SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT); 486 SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE); 487 SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY); 488 SVCSTR(WMI_SERVICE_MGMT_TX_WMI); 489 SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH); 490 SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS); 491 SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT); 492 SVCSTR(WMI_SERVICE_TPC_STATS_FINAL); 493 SVCSTR(WMI_SERVICE_RESET_CHIP); 494 SVCSTR(WMI_SERVICE_SPOOF_MAC_SUPPORT); 495 SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI); 496 SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT); 497 SVCSTR(WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT); 498 SVCSTR(WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT); 499 SVCSTR(WMI_SERVICE_THERM_THROT); 500 SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE); 501 SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT); 502 SVCSTR(WMI_SERVICE_REPORT_AIRTIME); 503 SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS); 504 SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER); 505 SVCSTR(WMI_SERVICE_SUPPORT_EXTEND_ADDRESS); 506 507 case WMI_SERVICE_MAX: 508 return NULL; 509 } 510 511 #undef SVCSTR 512 513 return NULL; 514 } 515 516 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 517 ((svc_id) < (len) && \ 518 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \ 519 BIT((svc_id) % (sizeof(u32)))) 520 521 /* This extension is required to accommodate new services, current limit 522 * for wmi_services is 64 as target is using only 4-bits of each 32-bit 523 * wmi_service word. Extending this to make use of remaining unused bits 524 * for new services. 525 */ 526 #define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \ 527 ((svc_id) >= (len) && \ 528 __le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \ 529 BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4)) 530 531 #define SVCMAP(x, y, len) \ 532 do { \ 533 if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \ 534 (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \ 535 __set_bit(y, out); \ 536 } while (0) 537 538 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out, 539 size_t len) 540 { 541 SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD, 542 WMI_SERVICE_BEACON_OFFLOAD, len); 543 SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD, 544 WMI_SERVICE_SCAN_OFFLOAD, len); 545 SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD, 546 WMI_SERVICE_ROAM_OFFLOAD, len); 547 SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD, 548 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 549 SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE, 550 WMI_SERVICE_STA_PWRSAVE, len); 551 SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE, 552 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 553 SVCMAP(WMI_10X_SERVICE_AP_UAPSD, 554 WMI_SERVICE_AP_UAPSD, len); 555 SVCMAP(WMI_10X_SERVICE_AP_DFS, 556 WMI_SERVICE_AP_DFS, len); 557 SVCMAP(WMI_10X_SERVICE_11AC, 558 WMI_SERVICE_11AC, len); 559 SVCMAP(WMI_10X_SERVICE_BLOCKACK, 560 WMI_SERVICE_BLOCKACK, len); 561 SVCMAP(WMI_10X_SERVICE_PHYERR, 562 WMI_SERVICE_PHYERR, len); 563 SVCMAP(WMI_10X_SERVICE_BCN_FILTER, 564 WMI_SERVICE_BCN_FILTER, len); 565 SVCMAP(WMI_10X_SERVICE_RTT, 566 WMI_SERVICE_RTT, len); 567 SVCMAP(WMI_10X_SERVICE_RATECTRL, 568 WMI_SERVICE_RATECTRL, len); 569 SVCMAP(WMI_10X_SERVICE_WOW, 570 WMI_SERVICE_WOW, len); 571 SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE, 572 WMI_SERVICE_RATECTRL_CACHE, len); 573 SVCMAP(WMI_10X_SERVICE_IRAM_TIDS, 574 WMI_SERVICE_IRAM_TIDS, len); 575 SVCMAP(WMI_10X_SERVICE_BURST, 576 WMI_SERVICE_BURST, len); 577 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT, 578 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 579 SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG, 580 WMI_SERVICE_FORCE_FW_HANG, len); 581 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT, 582 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 583 SVCMAP(WMI_10X_SERVICE_ATF, 584 WMI_SERVICE_ATF, len); 585 SVCMAP(WMI_10X_SERVICE_COEX_GPIO, 586 WMI_SERVICE_COEX_GPIO, len); 587 SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF, 588 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 589 SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF, 590 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 591 SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64, 592 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 593 SVCMAP(WMI_10X_SERVICE_MESH, 594 WMI_SERVICE_MESH_11S, len); 595 SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT, 596 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 597 SVCMAP(WMI_10X_SERVICE_PEER_STATS, 598 WMI_SERVICE_PEER_STATS, len); 599 SVCMAP(WMI_10X_SERVICE_RESET_CHIP, 600 WMI_SERVICE_RESET_CHIP, len); 601 SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 602 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len); 603 SVCMAP(WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT, 604 WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, len); 605 SVCMAP(WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT, 606 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len); 607 } 608 609 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out, 610 size_t len) 611 { 612 SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD, 613 WMI_SERVICE_BEACON_OFFLOAD, len); 614 SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD, 615 WMI_SERVICE_SCAN_OFFLOAD, len); 616 SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD, 617 WMI_SERVICE_ROAM_OFFLOAD, len); 618 SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD, 619 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 620 SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE, 621 WMI_SERVICE_STA_PWRSAVE, len); 622 SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE, 623 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 624 SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD, 625 WMI_SERVICE_AP_UAPSD, len); 626 SVCMAP(WMI_MAIN_SERVICE_AP_DFS, 627 WMI_SERVICE_AP_DFS, len); 628 SVCMAP(WMI_MAIN_SERVICE_11AC, 629 WMI_SERVICE_11AC, len); 630 SVCMAP(WMI_MAIN_SERVICE_BLOCKACK, 631 WMI_SERVICE_BLOCKACK, len); 632 SVCMAP(WMI_MAIN_SERVICE_PHYERR, 633 WMI_SERVICE_PHYERR, len); 634 SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER, 635 WMI_SERVICE_BCN_FILTER, len); 636 SVCMAP(WMI_MAIN_SERVICE_RTT, 637 WMI_SERVICE_RTT, len); 638 SVCMAP(WMI_MAIN_SERVICE_RATECTRL, 639 WMI_SERVICE_RATECTRL, len); 640 SVCMAP(WMI_MAIN_SERVICE_WOW, 641 WMI_SERVICE_WOW, len); 642 SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE, 643 WMI_SERVICE_RATECTRL_CACHE, len); 644 SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS, 645 WMI_SERVICE_IRAM_TIDS, len); 646 SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD, 647 WMI_SERVICE_ARPNS_OFFLOAD, len); 648 SVCMAP(WMI_MAIN_SERVICE_NLO, 649 WMI_SERVICE_NLO, len); 650 SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD, 651 WMI_SERVICE_GTK_OFFLOAD, len); 652 SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH, 653 WMI_SERVICE_SCAN_SCH, len); 654 SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD, 655 WMI_SERVICE_CSA_OFFLOAD, len); 656 SVCMAP(WMI_MAIN_SERVICE_CHATTER, 657 WMI_SERVICE_CHATTER, len); 658 SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID, 659 WMI_SERVICE_COEX_FREQAVOID, len); 660 SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE, 661 WMI_SERVICE_PACKET_POWER_SAVE, len); 662 SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG, 663 WMI_SERVICE_FORCE_FW_HANG, len); 664 SVCMAP(WMI_MAIN_SERVICE_GPIO, 665 WMI_SERVICE_GPIO, len); 666 SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM, 667 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len); 668 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 669 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 670 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 671 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 672 SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE, 673 WMI_SERVICE_STA_KEEP_ALIVE, len); 674 SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP, 675 WMI_SERVICE_TX_ENCAP, len); 676 } 677 678 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out, 679 size_t len) 680 { 681 SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD, 682 WMI_SERVICE_BEACON_OFFLOAD, len); 683 SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD, 684 WMI_SERVICE_SCAN_OFFLOAD, len); 685 SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD, 686 WMI_SERVICE_ROAM_OFFLOAD, len); 687 SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD, 688 WMI_SERVICE_BCN_MISS_OFFLOAD, len); 689 SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE, 690 WMI_SERVICE_STA_PWRSAVE, len); 691 SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE, 692 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len); 693 SVCMAP(WMI_10_4_SERVICE_AP_UAPSD, 694 WMI_SERVICE_AP_UAPSD, len); 695 SVCMAP(WMI_10_4_SERVICE_AP_DFS, 696 WMI_SERVICE_AP_DFS, len); 697 SVCMAP(WMI_10_4_SERVICE_11AC, 698 WMI_SERVICE_11AC, len); 699 SVCMAP(WMI_10_4_SERVICE_BLOCKACK, 700 WMI_SERVICE_BLOCKACK, len); 701 SVCMAP(WMI_10_4_SERVICE_PHYERR, 702 WMI_SERVICE_PHYERR, len); 703 SVCMAP(WMI_10_4_SERVICE_BCN_FILTER, 704 WMI_SERVICE_BCN_FILTER, len); 705 SVCMAP(WMI_10_4_SERVICE_RTT, 706 WMI_SERVICE_RTT, len); 707 SVCMAP(WMI_10_4_SERVICE_RATECTRL, 708 WMI_SERVICE_RATECTRL, len); 709 SVCMAP(WMI_10_4_SERVICE_WOW, 710 WMI_SERVICE_WOW, len); 711 SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE, 712 WMI_SERVICE_RATECTRL_CACHE, len); 713 SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS, 714 WMI_SERVICE_IRAM_TIDS, len); 715 SVCMAP(WMI_10_4_SERVICE_BURST, 716 WMI_SERVICE_BURST, len); 717 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT, 718 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len); 719 SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD, 720 WMI_SERVICE_GTK_OFFLOAD, len); 721 SVCMAP(WMI_10_4_SERVICE_SCAN_SCH, 722 WMI_SERVICE_SCAN_SCH, len); 723 SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD, 724 WMI_SERVICE_CSA_OFFLOAD, len); 725 SVCMAP(WMI_10_4_SERVICE_CHATTER, 726 WMI_SERVICE_CHATTER, len); 727 SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID, 728 WMI_SERVICE_COEX_FREQAVOID, len); 729 SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE, 730 WMI_SERVICE_PACKET_POWER_SAVE, len); 731 SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG, 732 WMI_SERVICE_FORCE_FW_HANG, len); 733 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT, 734 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len); 735 SVCMAP(WMI_10_4_SERVICE_GPIO, 736 WMI_SERVICE_GPIO, len); 737 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, 738 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len); 739 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, 740 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len); 741 SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE, 742 WMI_SERVICE_STA_KEEP_ALIVE, len); 743 SVCMAP(WMI_10_4_SERVICE_TX_ENCAP, 744 WMI_SERVICE_TX_ENCAP, len); 745 SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, 746 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len); 747 SVCMAP(WMI_10_4_SERVICE_EARLY_RX, 748 WMI_SERVICE_EARLY_RX, len); 749 SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA, 750 WMI_SERVICE_ENHANCED_PROXY_STA, len); 751 SVCMAP(WMI_10_4_SERVICE_TT, 752 WMI_SERVICE_TT, len); 753 SVCMAP(WMI_10_4_SERVICE_ATF, 754 WMI_SERVICE_ATF, len); 755 SVCMAP(WMI_10_4_SERVICE_PEER_CACHING, 756 WMI_SERVICE_PEER_CACHING, len); 757 SVCMAP(WMI_10_4_SERVICE_COEX_GPIO, 758 WMI_SERVICE_COEX_GPIO, len); 759 SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF, 760 WMI_SERVICE_AUX_SPECTRAL_INTF, len); 761 SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF, 762 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len); 763 SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64, 764 WMI_SERVICE_BSS_CHANNEL_INFO_64, len); 765 SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT, 766 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len); 767 SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S, 768 WMI_SERVICE_MESH_NON_11S, len); 769 SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, 770 WMI_SERVICE_RESTRT_CHNL_SUPPORT, len); 771 SVCMAP(WMI_10_4_SERVICE_PEER_STATS, 772 WMI_SERVICE_PEER_STATS, len); 773 SVCMAP(WMI_10_4_SERVICE_MESH_11S, 774 WMI_SERVICE_MESH_11S, len); 775 SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, 776 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len); 777 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, 778 WMI_SERVICE_TX_MODE_PUSH_ONLY, len); 779 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, 780 WMI_SERVICE_TX_MODE_PUSH_PULL, len); 781 SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC, 782 WMI_SERVICE_TX_MODE_DYNAMIC, len); 783 SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER, 784 WMI_SERVICE_VDEV_RX_FILTER, len); 785 SVCMAP(WMI_10_4_SERVICE_BTCOEX, 786 WMI_SERVICE_BTCOEX, len); 787 SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION, 788 WMI_SERVICE_CHECK_CAL_VERSION, len); 789 SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2, 790 WMI_SERVICE_DBGLOG_WARN2, len); 791 SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE, 792 WMI_SERVICE_BTCOEX_DUTY_CYCLE, len); 793 SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT, 794 WMI_SERVICE_4_WIRE_COEX_SUPPORT, len); 795 SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT, 796 WMI_SERVICE_EXTENDED_NSS_SUPPORT, len); 797 SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT, 798 WMI_SERVICE_PROG_GPIO_BAND_SELECT, len); 799 SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT, 800 WMI_SERVICE_SMART_LOGGING_SUPPORT, len); 801 SVCMAP(WMI_10_4_SERVICE_TDLS, 802 WMI_SERVICE_TDLS, len); 803 SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN, 804 WMI_SERVICE_TDLS_OFFCHAN, len); 805 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA, 806 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len); 807 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA, 808 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len); 809 SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, 810 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len); 811 SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 812 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len); 813 SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH, 814 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len); 815 SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, 816 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len); 817 SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT, 818 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len); 819 SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL, 820 WMI_SERVICE_TPC_STATS_FINAL, len); 821 SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI, 822 WMI_SERVICE_TX_DATA_ACK_RSSI, len); 823 SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, 824 WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len); 825 SVCMAP(WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, 826 WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, len); 827 SVCMAP(WMI_10_4_SERVICE_RTT_RESPONDER_ROLE, 828 WMI_SERVICE_RTT_RESPONDER_ROLE, len); 829 SVCMAP(WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT, 830 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len); 831 SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME, 832 WMI_SERVICE_REPORT_AIRTIME, len); 833 SVCMAP(WMI_10_4_SERVICE_TX_PWR_PER_PEER, 834 WMI_SERVICE_TX_PWR_PER_PEER, len); 835 SVCMAP(WMI_10_4_SERVICE_RESET_CHIP, 836 WMI_SERVICE_RESET_CHIP, len); 837 } 838 839 #undef SVCMAP 840 841 /* 2 word representation of MAC addr */ 842 struct wmi_mac_addr { 843 union { 844 u8 addr[6]; 845 struct { 846 u32 word0; 847 u32 word1; 848 } __packed; 849 } __packed; 850 } __packed; 851 852 struct wmi_cmd_map { 853 u32 init_cmdid; 854 u32 start_scan_cmdid; 855 u32 stop_scan_cmdid; 856 u32 scan_chan_list_cmdid; 857 u32 scan_sch_prio_tbl_cmdid; 858 u32 scan_prob_req_oui_cmdid; 859 u32 pdev_set_regdomain_cmdid; 860 u32 pdev_set_channel_cmdid; 861 u32 pdev_set_param_cmdid; 862 u32 pdev_pktlog_enable_cmdid; 863 u32 pdev_pktlog_disable_cmdid; 864 u32 pdev_set_wmm_params_cmdid; 865 u32 pdev_set_ht_cap_ie_cmdid; 866 u32 pdev_set_vht_cap_ie_cmdid; 867 u32 pdev_set_dscp_tid_map_cmdid; 868 u32 pdev_set_quiet_mode_cmdid; 869 u32 pdev_green_ap_ps_enable_cmdid; 870 u32 pdev_get_tpc_config_cmdid; 871 u32 pdev_set_base_macaddr_cmdid; 872 u32 vdev_create_cmdid; 873 u32 vdev_delete_cmdid; 874 u32 vdev_start_request_cmdid; 875 u32 vdev_restart_request_cmdid; 876 u32 vdev_up_cmdid; 877 u32 vdev_stop_cmdid; 878 u32 vdev_down_cmdid; 879 u32 vdev_set_param_cmdid; 880 u32 vdev_install_key_cmdid; 881 u32 peer_create_cmdid; 882 u32 peer_delete_cmdid; 883 u32 peer_flush_tids_cmdid; 884 u32 peer_set_param_cmdid; 885 u32 peer_assoc_cmdid; 886 u32 peer_add_wds_entry_cmdid; 887 u32 peer_remove_wds_entry_cmdid; 888 u32 peer_mcast_group_cmdid; 889 u32 bcn_tx_cmdid; 890 u32 pdev_send_bcn_cmdid; 891 u32 bcn_tmpl_cmdid; 892 u32 bcn_filter_rx_cmdid; 893 u32 prb_req_filter_rx_cmdid; 894 u32 mgmt_tx_cmdid; 895 u32 mgmt_tx_send_cmdid; 896 u32 prb_tmpl_cmdid; 897 u32 addba_clear_resp_cmdid; 898 u32 addba_send_cmdid; 899 u32 addba_status_cmdid; 900 u32 delba_send_cmdid; 901 u32 addba_set_resp_cmdid; 902 u32 send_singleamsdu_cmdid; 903 u32 sta_powersave_mode_cmdid; 904 u32 sta_powersave_param_cmdid; 905 u32 sta_mimo_ps_mode_cmdid; 906 u32 pdev_dfs_enable_cmdid; 907 u32 pdev_dfs_disable_cmdid; 908 u32 roam_scan_mode; 909 u32 roam_scan_rssi_threshold; 910 u32 roam_scan_period; 911 u32 roam_scan_rssi_change_threshold; 912 u32 roam_ap_profile; 913 u32 ofl_scan_add_ap_profile; 914 u32 ofl_scan_remove_ap_profile; 915 u32 ofl_scan_period; 916 u32 p2p_dev_set_device_info; 917 u32 p2p_dev_set_discoverability; 918 u32 p2p_go_set_beacon_ie; 919 u32 p2p_go_set_probe_resp_ie; 920 u32 p2p_set_vendor_ie_data_cmdid; 921 u32 ap_ps_peer_param_cmdid; 922 u32 ap_ps_peer_uapsd_coex_cmdid; 923 u32 peer_rate_retry_sched_cmdid; 924 u32 wlan_profile_trigger_cmdid; 925 u32 wlan_profile_set_hist_intvl_cmdid; 926 u32 wlan_profile_get_profile_data_cmdid; 927 u32 wlan_profile_enable_profile_id_cmdid; 928 u32 wlan_profile_list_profile_id_cmdid; 929 u32 pdev_suspend_cmdid; 930 u32 pdev_resume_cmdid; 931 u32 add_bcn_filter_cmdid; 932 u32 rmv_bcn_filter_cmdid; 933 u32 wow_add_wake_pattern_cmdid; 934 u32 wow_del_wake_pattern_cmdid; 935 u32 wow_enable_disable_wake_event_cmdid; 936 u32 wow_enable_cmdid; 937 u32 wow_hostwakeup_from_sleep_cmdid; 938 u32 rtt_measreq_cmdid; 939 u32 rtt_tsf_cmdid; 940 u32 vdev_spectral_scan_configure_cmdid; 941 u32 vdev_spectral_scan_enable_cmdid; 942 u32 request_stats_cmdid; 943 u32 set_arp_ns_offload_cmdid; 944 u32 network_list_offload_config_cmdid; 945 u32 gtk_offload_cmdid; 946 u32 csa_offload_enable_cmdid; 947 u32 csa_offload_chanswitch_cmdid; 948 u32 chatter_set_mode_cmdid; 949 u32 peer_tid_addba_cmdid; 950 u32 peer_tid_delba_cmdid; 951 u32 sta_dtim_ps_method_cmdid; 952 u32 sta_uapsd_auto_trig_cmdid; 953 u32 sta_keepalive_cmd; 954 u32 echo_cmdid; 955 u32 pdev_utf_cmdid; 956 u32 dbglog_cfg_cmdid; 957 u32 pdev_qvit_cmdid; 958 u32 pdev_ftm_intg_cmdid; 959 u32 vdev_set_keepalive_cmdid; 960 u32 vdev_get_keepalive_cmdid; 961 u32 force_fw_hang_cmdid; 962 u32 gpio_config_cmdid; 963 u32 gpio_output_cmdid; 964 u32 pdev_get_temperature_cmdid; 965 u32 vdev_set_wmm_params_cmdid; 966 u32 tdls_set_state_cmdid; 967 u32 tdls_peer_update_cmdid; 968 u32 adaptive_qcs_cmdid; 969 u32 scan_update_request_cmdid; 970 u32 vdev_standby_response_cmdid; 971 u32 vdev_resume_response_cmdid; 972 u32 wlan_peer_caching_add_peer_cmdid; 973 u32 wlan_peer_caching_evict_peer_cmdid; 974 u32 wlan_peer_caching_restore_peer_cmdid; 975 u32 wlan_peer_caching_print_all_peers_info_cmdid; 976 u32 peer_update_wds_entry_cmdid; 977 u32 peer_add_proxy_sta_entry_cmdid; 978 u32 rtt_keepalive_cmdid; 979 u32 oem_req_cmdid; 980 u32 nan_cmdid; 981 u32 vdev_ratemask_cmdid; 982 u32 qboost_cfg_cmdid; 983 u32 pdev_smart_ant_enable_cmdid; 984 u32 pdev_smart_ant_set_rx_antenna_cmdid; 985 u32 peer_smart_ant_set_tx_antenna_cmdid; 986 u32 peer_smart_ant_set_train_info_cmdid; 987 u32 peer_smart_ant_set_node_config_ops_cmdid; 988 u32 pdev_set_antenna_switch_table_cmdid; 989 u32 pdev_set_ctl_table_cmdid; 990 u32 pdev_set_mimogain_table_cmdid; 991 u32 pdev_ratepwr_table_cmdid; 992 u32 pdev_ratepwr_chainmsk_table_cmdid; 993 u32 pdev_fips_cmdid; 994 u32 tt_set_conf_cmdid; 995 u32 fwtest_cmdid; 996 u32 vdev_atf_request_cmdid; 997 u32 peer_atf_request_cmdid; 998 u32 pdev_get_ani_cck_config_cmdid; 999 u32 pdev_get_ani_ofdm_config_cmdid; 1000 u32 pdev_reserve_ast_entry_cmdid; 1001 u32 pdev_get_nfcal_power_cmdid; 1002 u32 pdev_get_tpc_cmdid; 1003 u32 pdev_get_ast_info_cmdid; 1004 u32 vdev_set_dscp_tid_map_cmdid; 1005 u32 pdev_get_info_cmdid; 1006 u32 vdev_get_info_cmdid; 1007 u32 vdev_filter_neighbor_rx_packets_cmdid; 1008 u32 mu_cal_start_cmdid; 1009 u32 set_cca_params_cmdid; 1010 u32 pdev_bss_chan_info_request_cmdid; 1011 u32 pdev_enable_adaptive_cca_cmdid; 1012 u32 ext_resource_cfg_cmdid; 1013 u32 vdev_set_ie_cmdid; 1014 u32 set_lteu_config_cmdid; 1015 u32 atf_ssid_grouping_request_cmdid; 1016 u32 peer_atf_ext_request_cmdid; 1017 u32 set_periodic_channel_stats_cfg_cmdid; 1018 u32 peer_bwf_request_cmdid; 1019 u32 btcoex_cfg_cmdid; 1020 u32 peer_tx_mu_txmit_count_cmdid; 1021 u32 peer_tx_mu_txmit_rstcnt_cmdid; 1022 u32 peer_gid_userpos_list_cmdid; 1023 u32 pdev_check_cal_version_cmdid; 1024 u32 coex_version_cfg_cmid; 1025 u32 pdev_get_rx_filter_cmdid; 1026 u32 pdev_extended_nss_cfg_cmdid; 1027 u32 vdev_set_scan_nac_rssi_cmdid; 1028 u32 prog_gpio_band_select_cmdid; 1029 u32 config_smart_logging_cmdid; 1030 u32 debug_fatal_condition_cmdid; 1031 u32 get_tsf_timer_cmdid; 1032 u32 pdev_get_tpc_table_cmdid; 1033 u32 vdev_sifs_trigger_time_cmdid; 1034 u32 pdev_wds_entry_list_cmdid; 1035 u32 tdls_set_offchan_mode_cmdid; 1036 u32 radar_found_cmdid; 1037 u32 set_bb_timing_cmdid; 1038 }; 1039 1040 /* 1041 * wmi command groups. 1042 */ 1043 enum wmi_cmd_group { 1044 /* 0 to 2 are reserved */ 1045 WMI_GRP_START = 0x3, 1046 WMI_GRP_SCAN = WMI_GRP_START, 1047 WMI_GRP_PDEV, 1048 WMI_GRP_VDEV, 1049 WMI_GRP_PEER, 1050 WMI_GRP_MGMT, 1051 WMI_GRP_BA_NEG, 1052 WMI_GRP_STA_PS, 1053 WMI_GRP_DFS, 1054 WMI_GRP_ROAM, 1055 WMI_GRP_OFL_SCAN, 1056 WMI_GRP_P2P, 1057 WMI_GRP_AP_PS, 1058 WMI_GRP_RATE_CTRL, 1059 WMI_GRP_PROFILE, 1060 WMI_GRP_SUSPEND, 1061 WMI_GRP_BCN_FILTER, 1062 WMI_GRP_WOW, 1063 WMI_GRP_RTT, 1064 WMI_GRP_SPECTRAL, 1065 WMI_GRP_STATS, 1066 WMI_GRP_ARP_NS_OFL, 1067 WMI_GRP_NLO_OFL, 1068 WMI_GRP_GTK_OFL, 1069 WMI_GRP_CSA_OFL, 1070 WMI_GRP_CHATTER, 1071 WMI_GRP_TID_ADDBA, 1072 WMI_GRP_MISC, 1073 WMI_GRP_GPIO, 1074 }; 1075 1076 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1) 1077 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1) 1078 1079 #define WMI_CMD_UNSUPPORTED 0 1080 1081 /* Command IDs and command events for MAIN FW. */ 1082 enum wmi_cmd_id { 1083 WMI_INIT_CMDID = 0x1, 1084 1085 /* Scan specific commands */ 1086 WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN), 1087 WMI_STOP_SCAN_CMDID, 1088 WMI_SCAN_CHAN_LIST_CMDID, 1089 WMI_SCAN_SCH_PRIO_TBL_CMDID, 1090 1091 /* PDEV (physical device) specific commands */ 1092 WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV), 1093 WMI_PDEV_SET_CHANNEL_CMDID, 1094 WMI_PDEV_SET_PARAM_CMDID, 1095 WMI_PDEV_PKTLOG_ENABLE_CMDID, 1096 WMI_PDEV_PKTLOG_DISABLE_CMDID, 1097 WMI_PDEV_SET_WMM_PARAMS_CMDID, 1098 WMI_PDEV_SET_HT_CAP_IE_CMDID, 1099 WMI_PDEV_SET_VHT_CAP_IE_CMDID, 1100 WMI_PDEV_SET_DSCP_TID_MAP_CMDID, 1101 WMI_PDEV_SET_QUIET_MODE_CMDID, 1102 WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1103 WMI_PDEV_GET_TPC_CONFIG_CMDID, 1104 WMI_PDEV_SET_BASE_MACADDR_CMDID, 1105 1106 /* VDEV (virtual device) specific commands */ 1107 WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV), 1108 WMI_VDEV_DELETE_CMDID, 1109 WMI_VDEV_START_REQUEST_CMDID, 1110 WMI_VDEV_RESTART_REQUEST_CMDID, 1111 WMI_VDEV_UP_CMDID, 1112 WMI_VDEV_STOP_CMDID, 1113 WMI_VDEV_DOWN_CMDID, 1114 WMI_VDEV_SET_PARAM_CMDID, 1115 WMI_VDEV_INSTALL_KEY_CMDID, 1116 1117 /* peer specific commands */ 1118 WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER), 1119 WMI_PEER_DELETE_CMDID, 1120 WMI_PEER_FLUSH_TIDS_CMDID, 1121 WMI_PEER_SET_PARAM_CMDID, 1122 WMI_PEER_ASSOC_CMDID, 1123 WMI_PEER_ADD_WDS_ENTRY_CMDID, 1124 WMI_PEER_REMOVE_WDS_ENTRY_CMDID, 1125 WMI_PEER_MCAST_GROUP_CMDID, 1126 1127 /* beacon/management specific commands */ 1128 WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT), 1129 WMI_PDEV_SEND_BCN_CMDID, 1130 WMI_BCN_TMPL_CMDID, 1131 WMI_BCN_FILTER_RX_CMDID, 1132 WMI_PRB_REQ_FILTER_RX_CMDID, 1133 WMI_MGMT_TX_CMDID, 1134 WMI_PRB_TMPL_CMDID, 1135 1136 /* commands to directly control BA negotiation directly from host. */ 1137 WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG), 1138 WMI_ADDBA_SEND_CMDID, 1139 WMI_ADDBA_STATUS_CMDID, 1140 WMI_DELBA_SEND_CMDID, 1141 WMI_ADDBA_SET_RESP_CMDID, 1142 WMI_SEND_SINGLEAMSDU_CMDID, 1143 1144 /* Station power save specific config */ 1145 WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS), 1146 WMI_STA_POWERSAVE_PARAM_CMDID, 1147 WMI_STA_MIMO_PS_MODE_CMDID, 1148 1149 /** DFS-specific commands */ 1150 WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS), 1151 WMI_PDEV_DFS_DISABLE_CMDID, 1152 1153 /* Roaming specific commands */ 1154 WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM), 1155 WMI_ROAM_SCAN_RSSI_THRESHOLD, 1156 WMI_ROAM_SCAN_PERIOD, 1157 WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1158 WMI_ROAM_AP_PROFILE, 1159 1160 /* offload scan specific commands */ 1161 WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN), 1162 WMI_OFL_SCAN_REMOVE_AP_PROFILE, 1163 WMI_OFL_SCAN_PERIOD, 1164 1165 /* P2P specific commands */ 1166 WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P), 1167 WMI_P2P_DEV_SET_DISCOVERABILITY, 1168 WMI_P2P_GO_SET_BEACON_IE, 1169 WMI_P2P_GO_SET_PROBE_RESP_IE, 1170 WMI_P2P_SET_VENDOR_IE_DATA_CMDID, 1171 1172 /* AP power save specific config */ 1173 WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS), 1174 WMI_AP_PS_PEER_UAPSD_COEX_CMDID, 1175 1176 /* Rate-control specific commands */ 1177 WMI_PEER_RATE_RETRY_SCHED_CMDID = 1178 WMI_CMD_GRP(WMI_GRP_RATE_CTRL), 1179 1180 /* WLAN Profiling commands. */ 1181 WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE), 1182 WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1183 WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1184 WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1185 WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1186 1187 /* Suspend resume command Ids */ 1188 WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND), 1189 WMI_PDEV_RESUME_CMDID, 1190 1191 /* Beacon filter commands */ 1192 WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER), 1193 WMI_RMV_BCN_FILTER_CMDID, 1194 1195 /* WOW Specific WMI commands*/ 1196 WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW), 1197 WMI_WOW_DEL_WAKE_PATTERN_CMDID, 1198 WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1199 WMI_WOW_ENABLE_CMDID, 1200 WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1201 1202 /* RTT measurement related cmd */ 1203 WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT), 1204 WMI_RTT_TSF_CMDID, 1205 1206 /* spectral scan commands */ 1207 WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL), 1208 WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1209 1210 /* F/W stats */ 1211 WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS), 1212 1213 /* ARP OFFLOAD REQUEST*/ 1214 WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL), 1215 1216 /* NS offload confid*/ 1217 WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL), 1218 1219 /* GTK offload Specific WMI commands*/ 1220 WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL), 1221 1222 /* CSA offload Specific WMI commands*/ 1223 WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL), 1224 WMI_CSA_OFFLOAD_CHANSWITCH_CMDID, 1225 1226 /* Chatter commands*/ 1227 WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER), 1228 1229 /* addba specific commands */ 1230 WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA), 1231 WMI_PEER_TID_DELBA_CMDID, 1232 1233 /* set station mimo powersave method */ 1234 WMI_STA_DTIM_PS_METHOD_CMDID, 1235 /* Configure the Station UAPSD AC Auto Trigger Parameters */ 1236 WMI_STA_UAPSD_AUTO_TRIG_CMDID, 1237 1238 /* STA Keep alive parameter configuration, 1239 * Requires WMI_SERVICE_STA_KEEP_ALIVE 1240 */ 1241 WMI_STA_KEEPALIVE_CMD, 1242 1243 /* misc command group */ 1244 WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC), 1245 WMI_PDEV_UTF_CMDID, 1246 WMI_DBGLOG_CFG_CMDID, 1247 WMI_PDEV_QVIT_CMDID, 1248 WMI_PDEV_FTM_INTG_CMDID, 1249 WMI_VDEV_SET_KEEPALIVE_CMDID, 1250 WMI_VDEV_GET_KEEPALIVE_CMDID, 1251 WMI_FORCE_FW_HANG_CMDID, 1252 1253 /* GPIO Configuration */ 1254 WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO), 1255 WMI_GPIO_OUTPUT_CMDID, 1256 }; 1257 1258 enum wmi_event_id { 1259 WMI_SERVICE_READY_EVENTID = 0x1, 1260 WMI_READY_EVENTID, 1261 WMI_SERVICE_AVAILABLE_EVENTID, 1262 1263 /* Scan specific events */ 1264 WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN), 1265 1266 /* PDEV specific events */ 1267 WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV), 1268 WMI_CHAN_INFO_EVENTID, 1269 WMI_PHYERR_EVENTID, 1270 1271 /* VDEV specific events */ 1272 WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV), 1273 WMI_VDEV_STOPPED_EVENTID, 1274 WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID, 1275 1276 /* peer specific events */ 1277 WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER), 1278 1279 /* beacon/mgmt specific events */ 1280 WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT), 1281 WMI_HOST_SWBA_EVENTID, 1282 WMI_TBTTOFFSET_UPDATE_EVENTID, 1283 1284 /* ADDBA Related WMI Events*/ 1285 WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG), 1286 WMI_TX_ADDBA_COMPLETE_EVENTID, 1287 1288 /* Roam event to trigger roaming on host */ 1289 WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM), 1290 WMI_PROFILE_MATCH, 1291 1292 /* WoW */ 1293 WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW), 1294 1295 /* RTT */ 1296 WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT), 1297 WMI_TSF_MEASUREMENT_REPORT_EVENTID, 1298 WMI_RTT_ERROR_REPORT_EVENTID, 1299 1300 /* GTK offload */ 1301 WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL), 1302 WMI_GTK_REKEY_FAIL_EVENTID, 1303 1304 /* CSA IE received event */ 1305 WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL), 1306 1307 /* Misc events */ 1308 WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC), 1309 WMI_PDEV_UTF_EVENTID, 1310 WMI_DEBUG_MESG_EVENTID, 1311 WMI_UPDATE_STATS_EVENTID, 1312 WMI_DEBUG_PRINT_EVENTID, 1313 WMI_DCS_INTERFERENCE_EVENTID, 1314 WMI_PDEV_QVIT_EVENTID, 1315 WMI_WLAN_PROFILE_DATA_EVENTID, 1316 WMI_PDEV_FTM_INTG_EVENTID, 1317 WMI_WLAN_FREQ_AVOID_EVENTID, 1318 WMI_VDEV_GET_KEEPALIVE_EVENTID, 1319 1320 /* GPIO Event */ 1321 WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO), 1322 }; 1323 1324 /* Command IDs and command events for 10.X firmware */ 1325 enum wmi_10x_cmd_id { 1326 WMI_10X_START_CMDID = 0x9000, 1327 WMI_10X_END_CMDID = 0x9FFF, 1328 1329 /* initialize the wlan sub system */ 1330 WMI_10X_INIT_CMDID, 1331 1332 /* Scan specific commands */ 1333 1334 WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID, 1335 WMI_10X_STOP_SCAN_CMDID, 1336 WMI_10X_SCAN_CHAN_LIST_CMDID, 1337 WMI_10X_ECHO_CMDID, 1338 1339 /* PDEV(physical device) specific commands */ 1340 WMI_10X_PDEV_SET_REGDOMAIN_CMDID, 1341 WMI_10X_PDEV_SET_CHANNEL_CMDID, 1342 WMI_10X_PDEV_SET_PARAM_CMDID, 1343 WMI_10X_PDEV_PKTLOG_ENABLE_CMDID, 1344 WMI_10X_PDEV_PKTLOG_DISABLE_CMDID, 1345 WMI_10X_PDEV_SET_WMM_PARAMS_CMDID, 1346 WMI_10X_PDEV_SET_HT_CAP_IE_CMDID, 1347 WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID, 1348 WMI_10X_PDEV_SET_BASE_MACADDR_CMDID, 1349 WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID, 1350 WMI_10X_PDEV_SET_QUIET_MODE_CMDID, 1351 WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1352 WMI_10X_PDEV_GET_TPC_CONFIG_CMDID, 1353 1354 /* VDEV(virtual device) specific commands */ 1355 WMI_10X_VDEV_CREATE_CMDID, 1356 WMI_10X_VDEV_DELETE_CMDID, 1357 WMI_10X_VDEV_START_REQUEST_CMDID, 1358 WMI_10X_VDEV_RESTART_REQUEST_CMDID, 1359 WMI_10X_VDEV_UP_CMDID, 1360 WMI_10X_VDEV_STOP_CMDID, 1361 WMI_10X_VDEV_DOWN_CMDID, 1362 WMI_10X_VDEV_STANDBY_RESPONSE_CMDID, 1363 WMI_10X_VDEV_RESUME_RESPONSE_CMDID, 1364 WMI_10X_VDEV_SET_PARAM_CMDID, 1365 WMI_10X_VDEV_INSTALL_KEY_CMDID, 1366 1367 /* peer specific commands */ 1368 WMI_10X_PEER_CREATE_CMDID, 1369 WMI_10X_PEER_DELETE_CMDID, 1370 WMI_10X_PEER_FLUSH_TIDS_CMDID, 1371 WMI_10X_PEER_SET_PARAM_CMDID, 1372 WMI_10X_PEER_ASSOC_CMDID, 1373 WMI_10X_PEER_ADD_WDS_ENTRY_CMDID, 1374 WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID, 1375 WMI_10X_PEER_MCAST_GROUP_CMDID, 1376 1377 /* beacon/management specific commands */ 1378 1379 WMI_10X_BCN_TX_CMDID, 1380 WMI_10X_BCN_PRB_TMPL_CMDID, 1381 WMI_10X_BCN_FILTER_RX_CMDID, 1382 WMI_10X_PRB_REQ_FILTER_RX_CMDID, 1383 WMI_10X_MGMT_TX_CMDID, 1384 1385 /* commands to directly control ba negotiation directly from host. */ 1386 WMI_10X_ADDBA_CLEAR_RESP_CMDID, 1387 WMI_10X_ADDBA_SEND_CMDID, 1388 WMI_10X_ADDBA_STATUS_CMDID, 1389 WMI_10X_DELBA_SEND_CMDID, 1390 WMI_10X_ADDBA_SET_RESP_CMDID, 1391 WMI_10X_SEND_SINGLEAMSDU_CMDID, 1392 1393 /* Station power save specific config */ 1394 WMI_10X_STA_POWERSAVE_MODE_CMDID, 1395 WMI_10X_STA_POWERSAVE_PARAM_CMDID, 1396 WMI_10X_STA_MIMO_PS_MODE_CMDID, 1397 1398 /* set debug log config */ 1399 WMI_10X_DBGLOG_CFG_CMDID, 1400 1401 /* DFS-specific commands */ 1402 WMI_10X_PDEV_DFS_ENABLE_CMDID, 1403 WMI_10X_PDEV_DFS_DISABLE_CMDID, 1404 1405 /* QVIT specific command id */ 1406 WMI_10X_PDEV_QVIT_CMDID, 1407 1408 /* Offload Scan and Roaming related commands */ 1409 WMI_10X_ROAM_SCAN_MODE, 1410 WMI_10X_ROAM_SCAN_RSSI_THRESHOLD, 1411 WMI_10X_ROAM_SCAN_PERIOD, 1412 WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1413 WMI_10X_ROAM_AP_PROFILE, 1414 WMI_10X_OFL_SCAN_ADD_AP_PROFILE, 1415 WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE, 1416 WMI_10X_OFL_SCAN_PERIOD, 1417 1418 /* P2P specific commands */ 1419 WMI_10X_P2P_DEV_SET_DEVICE_INFO, 1420 WMI_10X_P2P_DEV_SET_DISCOVERABILITY, 1421 WMI_10X_P2P_GO_SET_BEACON_IE, 1422 WMI_10X_P2P_GO_SET_PROBE_RESP_IE, 1423 1424 /* AP power save specific config */ 1425 WMI_10X_AP_PS_PEER_PARAM_CMDID, 1426 WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID, 1427 1428 /* Rate-control specific commands */ 1429 WMI_10X_PEER_RATE_RETRY_SCHED_CMDID, 1430 1431 /* WLAN Profiling commands. */ 1432 WMI_10X_WLAN_PROFILE_TRIGGER_CMDID, 1433 WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1434 WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1435 WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1436 WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1437 1438 /* Suspend resume command Ids */ 1439 WMI_10X_PDEV_SUSPEND_CMDID, 1440 WMI_10X_PDEV_RESUME_CMDID, 1441 1442 /* Beacon filter commands */ 1443 WMI_10X_ADD_BCN_FILTER_CMDID, 1444 WMI_10X_RMV_BCN_FILTER_CMDID, 1445 1446 /* WOW Specific WMI commands*/ 1447 WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID, 1448 WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID, 1449 WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1450 WMI_10X_WOW_ENABLE_CMDID, 1451 WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1452 1453 /* RTT measurement related cmd */ 1454 WMI_10X_RTT_MEASREQ_CMDID, 1455 WMI_10X_RTT_TSF_CMDID, 1456 1457 /* transmit beacon by value */ 1458 WMI_10X_PDEV_SEND_BCN_CMDID, 1459 1460 /* F/W stats */ 1461 WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1462 WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1463 WMI_10X_REQUEST_STATS_CMDID, 1464 1465 /* GPIO Configuration */ 1466 WMI_10X_GPIO_CONFIG_CMDID, 1467 WMI_10X_GPIO_OUTPUT_CMDID, 1468 1469 WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1, 1470 }; 1471 1472 enum wmi_10x_event_id { 1473 WMI_10X_SERVICE_READY_EVENTID = 0x8000, 1474 WMI_10X_READY_EVENTID, 1475 WMI_10X_START_EVENTID = 0x9000, 1476 WMI_10X_END_EVENTID = 0x9FFF, 1477 1478 /* Scan specific events */ 1479 WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID, 1480 WMI_10X_ECHO_EVENTID, 1481 WMI_10X_DEBUG_MESG_EVENTID, 1482 WMI_10X_UPDATE_STATS_EVENTID, 1483 1484 /* Instantaneous RSSI event */ 1485 WMI_10X_INST_RSSI_STATS_EVENTID, 1486 1487 /* VDEV specific events */ 1488 WMI_10X_VDEV_START_RESP_EVENTID, 1489 WMI_10X_VDEV_STANDBY_REQ_EVENTID, 1490 WMI_10X_VDEV_RESUME_REQ_EVENTID, 1491 WMI_10X_VDEV_STOPPED_EVENTID, 1492 1493 /* peer specific events */ 1494 WMI_10X_PEER_STA_KICKOUT_EVENTID, 1495 1496 /* beacon/mgmt specific events */ 1497 WMI_10X_HOST_SWBA_EVENTID, 1498 WMI_10X_TBTTOFFSET_UPDATE_EVENTID, 1499 WMI_10X_MGMT_RX_EVENTID, 1500 1501 /* Channel stats event */ 1502 WMI_10X_CHAN_INFO_EVENTID, 1503 1504 /* PHY Error specific WMI event */ 1505 WMI_10X_PHYERR_EVENTID, 1506 1507 /* Roam event to trigger roaming on host */ 1508 WMI_10X_ROAM_EVENTID, 1509 1510 /* matching AP found from list of profiles */ 1511 WMI_10X_PROFILE_MATCH, 1512 1513 /* debug print message used for tracing FW code while debugging */ 1514 WMI_10X_DEBUG_PRINT_EVENTID, 1515 /* VI spoecific event */ 1516 WMI_10X_PDEV_QVIT_EVENTID, 1517 /* FW code profile data in response to profile request */ 1518 WMI_10X_WLAN_PROFILE_DATA_EVENTID, 1519 1520 /*RTT related event ID*/ 1521 WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID, 1522 WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID, 1523 WMI_10X_RTT_ERROR_REPORT_EVENTID, 1524 1525 WMI_10X_WOW_WAKEUP_HOST_EVENTID, 1526 WMI_10X_DCS_INTERFERENCE_EVENTID, 1527 1528 /* TPC config for the current operating channel */ 1529 WMI_10X_PDEV_TPC_CONFIG_EVENTID, 1530 1531 WMI_10X_GPIO_INPUT_EVENTID, 1532 WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1, 1533 }; 1534 1535 enum wmi_10_2_cmd_id { 1536 WMI_10_2_START_CMDID = 0x9000, 1537 WMI_10_2_END_CMDID = 0x9FFF, 1538 WMI_10_2_INIT_CMDID, 1539 WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID, 1540 WMI_10_2_STOP_SCAN_CMDID, 1541 WMI_10_2_SCAN_CHAN_LIST_CMDID, 1542 WMI_10_2_ECHO_CMDID, 1543 WMI_10_2_PDEV_SET_REGDOMAIN_CMDID, 1544 WMI_10_2_PDEV_SET_CHANNEL_CMDID, 1545 WMI_10_2_PDEV_SET_PARAM_CMDID, 1546 WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID, 1547 WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID, 1548 WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID, 1549 WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID, 1550 WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID, 1551 WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID, 1552 WMI_10_2_PDEV_SET_QUIET_MODE_CMDID, 1553 WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1554 WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID, 1555 WMI_10_2_VDEV_CREATE_CMDID, 1556 WMI_10_2_VDEV_DELETE_CMDID, 1557 WMI_10_2_VDEV_START_REQUEST_CMDID, 1558 WMI_10_2_VDEV_RESTART_REQUEST_CMDID, 1559 WMI_10_2_VDEV_UP_CMDID, 1560 WMI_10_2_VDEV_STOP_CMDID, 1561 WMI_10_2_VDEV_DOWN_CMDID, 1562 WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID, 1563 WMI_10_2_VDEV_RESUME_RESPONSE_CMDID, 1564 WMI_10_2_VDEV_SET_PARAM_CMDID, 1565 WMI_10_2_VDEV_INSTALL_KEY_CMDID, 1566 WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID, 1567 WMI_10_2_PEER_CREATE_CMDID, 1568 WMI_10_2_PEER_DELETE_CMDID, 1569 WMI_10_2_PEER_FLUSH_TIDS_CMDID, 1570 WMI_10_2_PEER_SET_PARAM_CMDID, 1571 WMI_10_2_PEER_ASSOC_CMDID, 1572 WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID, 1573 WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID, 1574 WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID, 1575 WMI_10_2_PEER_MCAST_GROUP_CMDID, 1576 WMI_10_2_BCN_TX_CMDID, 1577 WMI_10_2_BCN_PRB_TMPL_CMDID, 1578 WMI_10_2_BCN_FILTER_RX_CMDID, 1579 WMI_10_2_PRB_REQ_FILTER_RX_CMDID, 1580 WMI_10_2_MGMT_TX_CMDID, 1581 WMI_10_2_ADDBA_CLEAR_RESP_CMDID, 1582 WMI_10_2_ADDBA_SEND_CMDID, 1583 WMI_10_2_ADDBA_STATUS_CMDID, 1584 WMI_10_2_DELBA_SEND_CMDID, 1585 WMI_10_2_ADDBA_SET_RESP_CMDID, 1586 WMI_10_2_SEND_SINGLEAMSDU_CMDID, 1587 WMI_10_2_STA_POWERSAVE_MODE_CMDID, 1588 WMI_10_2_STA_POWERSAVE_PARAM_CMDID, 1589 WMI_10_2_STA_MIMO_PS_MODE_CMDID, 1590 WMI_10_2_DBGLOG_CFG_CMDID, 1591 WMI_10_2_PDEV_DFS_ENABLE_CMDID, 1592 WMI_10_2_PDEV_DFS_DISABLE_CMDID, 1593 WMI_10_2_PDEV_QVIT_CMDID, 1594 WMI_10_2_ROAM_SCAN_MODE, 1595 WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD, 1596 WMI_10_2_ROAM_SCAN_PERIOD, 1597 WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1598 WMI_10_2_ROAM_AP_PROFILE, 1599 WMI_10_2_OFL_SCAN_ADD_AP_PROFILE, 1600 WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE, 1601 WMI_10_2_OFL_SCAN_PERIOD, 1602 WMI_10_2_P2P_DEV_SET_DEVICE_INFO, 1603 WMI_10_2_P2P_DEV_SET_DISCOVERABILITY, 1604 WMI_10_2_P2P_GO_SET_BEACON_IE, 1605 WMI_10_2_P2P_GO_SET_PROBE_RESP_IE, 1606 WMI_10_2_AP_PS_PEER_PARAM_CMDID, 1607 WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID, 1608 WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID, 1609 WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID, 1610 WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1611 WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1612 WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1613 WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1614 WMI_10_2_PDEV_SUSPEND_CMDID, 1615 WMI_10_2_PDEV_RESUME_CMDID, 1616 WMI_10_2_ADD_BCN_FILTER_CMDID, 1617 WMI_10_2_RMV_BCN_FILTER_CMDID, 1618 WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID, 1619 WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID, 1620 WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1621 WMI_10_2_WOW_ENABLE_CMDID, 1622 WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1623 WMI_10_2_RTT_MEASREQ_CMDID, 1624 WMI_10_2_RTT_TSF_CMDID, 1625 WMI_10_2_RTT_KEEPALIVE_CMDID, 1626 WMI_10_2_PDEV_SEND_BCN_CMDID, 1627 WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1628 WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1629 WMI_10_2_REQUEST_STATS_CMDID, 1630 WMI_10_2_GPIO_CONFIG_CMDID, 1631 WMI_10_2_GPIO_OUTPUT_CMDID, 1632 WMI_10_2_VDEV_RATEMASK_CMDID, 1633 WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID, 1634 WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1635 WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1636 WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1637 WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1638 WMI_10_2_FORCE_FW_HANG_CMDID, 1639 WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1640 WMI_10_2_PDEV_SET_CTL_TABLE_CMDID, 1641 WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1642 WMI_10_2_PDEV_RATEPWR_TABLE_CMDID, 1643 WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1644 WMI_10_2_PDEV_GET_INFO, 1645 WMI_10_2_VDEV_GET_INFO, 1646 WMI_10_2_VDEV_ATF_REQUEST_CMDID, 1647 WMI_10_2_PEER_ATF_REQUEST_CMDID, 1648 WMI_10_2_PDEV_GET_TEMPERATURE_CMDID, 1649 WMI_10_2_MU_CAL_START_CMDID, 1650 WMI_10_2_SET_LTEU_CONFIG_CMDID, 1651 WMI_10_2_SET_CCA_PARAMS, 1652 WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1653 WMI_10_2_FWTEST_CMDID, 1654 WMI_10_2_PDEV_SET_BB_TIMING_CONFIG_CMDID, 1655 WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1, 1656 }; 1657 1658 enum wmi_10_2_event_id { 1659 WMI_10_2_SERVICE_READY_EVENTID = 0x8000, 1660 WMI_10_2_READY_EVENTID, 1661 WMI_10_2_DEBUG_MESG_EVENTID, 1662 WMI_10_2_START_EVENTID = 0x9000, 1663 WMI_10_2_END_EVENTID = 0x9FFF, 1664 WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID, 1665 WMI_10_2_ECHO_EVENTID, 1666 WMI_10_2_UPDATE_STATS_EVENTID, 1667 WMI_10_2_INST_RSSI_STATS_EVENTID, 1668 WMI_10_2_VDEV_START_RESP_EVENTID, 1669 WMI_10_2_VDEV_STANDBY_REQ_EVENTID, 1670 WMI_10_2_VDEV_RESUME_REQ_EVENTID, 1671 WMI_10_2_VDEV_STOPPED_EVENTID, 1672 WMI_10_2_PEER_STA_KICKOUT_EVENTID, 1673 WMI_10_2_HOST_SWBA_EVENTID, 1674 WMI_10_2_TBTTOFFSET_UPDATE_EVENTID, 1675 WMI_10_2_MGMT_RX_EVENTID, 1676 WMI_10_2_CHAN_INFO_EVENTID, 1677 WMI_10_2_PHYERR_EVENTID, 1678 WMI_10_2_ROAM_EVENTID, 1679 WMI_10_2_PROFILE_MATCH, 1680 WMI_10_2_DEBUG_PRINT_EVENTID, 1681 WMI_10_2_PDEV_QVIT_EVENTID, 1682 WMI_10_2_WLAN_PROFILE_DATA_EVENTID, 1683 WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID, 1684 WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID, 1685 WMI_10_2_RTT_ERROR_REPORT_EVENTID, 1686 WMI_10_2_RTT_KEEPALIVE_EVENTID, 1687 WMI_10_2_WOW_WAKEUP_HOST_EVENTID, 1688 WMI_10_2_DCS_INTERFERENCE_EVENTID, 1689 WMI_10_2_PDEV_TPC_CONFIG_EVENTID, 1690 WMI_10_2_GPIO_INPUT_EVENTID, 1691 WMI_10_2_PEER_RATECODE_LIST_EVENTID, 1692 WMI_10_2_GENERIC_BUFFER_EVENTID, 1693 WMI_10_2_MCAST_BUF_RELEASE_EVENTID, 1694 WMI_10_2_MCAST_LIST_AGEOUT_EVENTID, 1695 WMI_10_2_WDS_PEER_EVENTID, 1696 WMI_10_2_PEER_STA_PS_STATECHG_EVENTID, 1697 WMI_10_2_PDEV_TEMPERATURE_EVENTID, 1698 WMI_10_2_MU_REPORT_EVENTID, 1699 WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID, 1700 WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1, 1701 }; 1702 1703 enum wmi_10_4_cmd_id { 1704 WMI_10_4_START_CMDID = 0x9000, 1705 WMI_10_4_END_CMDID = 0x9FFF, 1706 WMI_10_4_INIT_CMDID, 1707 WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID, 1708 WMI_10_4_STOP_SCAN_CMDID, 1709 WMI_10_4_SCAN_CHAN_LIST_CMDID, 1710 WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID, 1711 WMI_10_4_SCAN_UPDATE_REQUEST_CMDID, 1712 WMI_10_4_ECHO_CMDID, 1713 WMI_10_4_PDEV_SET_REGDOMAIN_CMDID, 1714 WMI_10_4_PDEV_SET_CHANNEL_CMDID, 1715 WMI_10_4_PDEV_SET_PARAM_CMDID, 1716 WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID, 1717 WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID, 1718 WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID, 1719 WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID, 1720 WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID, 1721 WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID, 1722 WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID, 1723 WMI_10_4_PDEV_SET_QUIET_MODE_CMDID, 1724 WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID, 1725 WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID, 1726 WMI_10_4_VDEV_CREATE_CMDID, 1727 WMI_10_4_VDEV_DELETE_CMDID, 1728 WMI_10_4_VDEV_START_REQUEST_CMDID, 1729 WMI_10_4_VDEV_RESTART_REQUEST_CMDID, 1730 WMI_10_4_VDEV_UP_CMDID, 1731 WMI_10_4_VDEV_STOP_CMDID, 1732 WMI_10_4_VDEV_DOWN_CMDID, 1733 WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID, 1734 WMI_10_4_VDEV_RESUME_RESPONSE_CMDID, 1735 WMI_10_4_VDEV_SET_PARAM_CMDID, 1736 WMI_10_4_VDEV_INSTALL_KEY_CMDID, 1737 WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID, 1738 WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID, 1739 WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID, 1740 WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID, 1741 WMI_10_4_PEER_CREATE_CMDID, 1742 WMI_10_4_PEER_DELETE_CMDID, 1743 WMI_10_4_PEER_FLUSH_TIDS_CMDID, 1744 WMI_10_4_PEER_SET_PARAM_CMDID, 1745 WMI_10_4_PEER_ASSOC_CMDID, 1746 WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID, 1747 WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID, 1748 WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID, 1749 WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID, 1750 WMI_10_4_PEER_MCAST_GROUP_CMDID, 1751 WMI_10_4_BCN_TX_CMDID, 1752 WMI_10_4_PDEV_SEND_BCN_CMDID, 1753 WMI_10_4_BCN_PRB_TMPL_CMDID, 1754 WMI_10_4_BCN_FILTER_RX_CMDID, 1755 WMI_10_4_PRB_REQ_FILTER_RX_CMDID, 1756 WMI_10_4_MGMT_TX_CMDID, 1757 WMI_10_4_PRB_TMPL_CMDID, 1758 WMI_10_4_ADDBA_CLEAR_RESP_CMDID, 1759 WMI_10_4_ADDBA_SEND_CMDID, 1760 WMI_10_4_ADDBA_STATUS_CMDID, 1761 WMI_10_4_DELBA_SEND_CMDID, 1762 WMI_10_4_ADDBA_SET_RESP_CMDID, 1763 WMI_10_4_SEND_SINGLEAMSDU_CMDID, 1764 WMI_10_4_STA_POWERSAVE_MODE_CMDID, 1765 WMI_10_4_STA_POWERSAVE_PARAM_CMDID, 1766 WMI_10_4_STA_MIMO_PS_MODE_CMDID, 1767 WMI_10_4_DBGLOG_CFG_CMDID, 1768 WMI_10_4_PDEV_DFS_ENABLE_CMDID, 1769 WMI_10_4_PDEV_DFS_DISABLE_CMDID, 1770 WMI_10_4_PDEV_QVIT_CMDID, 1771 WMI_10_4_ROAM_SCAN_MODE, 1772 WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD, 1773 WMI_10_4_ROAM_SCAN_PERIOD, 1774 WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD, 1775 WMI_10_4_ROAM_AP_PROFILE, 1776 WMI_10_4_OFL_SCAN_ADD_AP_PROFILE, 1777 WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE, 1778 WMI_10_4_OFL_SCAN_PERIOD, 1779 WMI_10_4_P2P_DEV_SET_DEVICE_INFO, 1780 WMI_10_4_P2P_DEV_SET_DISCOVERABILITY, 1781 WMI_10_4_P2P_GO_SET_BEACON_IE, 1782 WMI_10_4_P2P_GO_SET_PROBE_RESP_IE, 1783 WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID, 1784 WMI_10_4_AP_PS_PEER_PARAM_CMDID, 1785 WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID, 1786 WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID, 1787 WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID, 1788 WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID, 1789 WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID, 1790 WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID, 1791 WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID, 1792 WMI_10_4_PDEV_SUSPEND_CMDID, 1793 WMI_10_4_PDEV_RESUME_CMDID, 1794 WMI_10_4_ADD_BCN_FILTER_CMDID, 1795 WMI_10_4_RMV_BCN_FILTER_CMDID, 1796 WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID, 1797 WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID, 1798 WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID, 1799 WMI_10_4_WOW_ENABLE_CMDID, 1800 WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, 1801 WMI_10_4_RTT_MEASREQ_CMDID, 1802 WMI_10_4_RTT_TSF_CMDID, 1803 WMI_10_4_RTT_KEEPALIVE_CMDID, 1804 WMI_10_4_OEM_REQ_CMDID, 1805 WMI_10_4_NAN_CMDID, 1806 WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID, 1807 WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID, 1808 WMI_10_4_REQUEST_STATS_CMDID, 1809 WMI_10_4_GPIO_CONFIG_CMDID, 1810 WMI_10_4_GPIO_OUTPUT_CMDID, 1811 WMI_10_4_VDEV_RATEMASK_CMDID, 1812 WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID, 1813 WMI_10_4_GTK_OFFLOAD_CMDID, 1814 WMI_10_4_QBOOST_CFG_CMDID, 1815 WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID, 1816 WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID, 1817 WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID, 1818 WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID, 1819 WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID, 1820 WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID, 1821 WMI_10_4_VDEV_SET_KEEPALIVE_CMDID, 1822 WMI_10_4_VDEV_GET_KEEPALIVE_CMDID, 1823 WMI_10_4_FORCE_FW_HANG_CMDID, 1824 WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID, 1825 WMI_10_4_PDEV_SET_CTL_TABLE_CMDID, 1826 WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID, 1827 WMI_10_4_PDEV_RATEPWR_TABLE_CMDID, 1828 WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID, 1829 WMI_10_4_PDEV_FIPS_CMDID, 1830 WMI_10_4_TT_SET_CONF_CMDID, 1831 WMI_10_4_FWTEST_CMDID, 1832 WMI_10_4_VDEV_ATF_REQUEST_CMDID, 1833 WMI_10_4_PEER_ATF_REQUEST_CMDID, 1834 WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID, 1835 WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID, 1836 WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID, 1837 WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID, 1838 WMI_10_4_PDEV_GET_TPC_CMDID, 1839 WMI_10_4_PDEV_GET_AST_INFO_CMDID, 1840 WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID, 1841 WMI_10_4_PDEV_GET_TEMPERATURE_CMDID, 1842 WMI_10_4_PDEV_GET_INFO_CMDID, 1843 WMI_10_4_VDEV_GET_INFO_CMDID, 1844 WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID, 1845 WMI_10_4_MU_CAL_START_CMDID, 1846 WMI_10_4_SET_CCA_PARAMS_CMDID, 1847 WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, 1848 WMI_10_4_EXT_RESOURCE_CFG_CMDID, 1849 WMI_10_4_VDEV_SET_IE_CMDID, 1850 WMI_10_4_SET_LTEU_CONFIG_CMDID, 1851 WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID, 1852 WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID, 1853 WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG, 1854 WMI_10_4_PEER_BWF_REQUEST_CMDID, 1855 WMI_10_4_BTCOEX_CFG_CMDID, 1856 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID, 1857 WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID, 1858 WMI_10_4_PEER_GID_USERPOS_LIST_CMDID, 1859 WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID, 1860 WMI_10_4_COEX_VERSION_CFG_CMID, 1861 WMI_10_4_PDEV_GET_RX_FILTER_CMDID, 1862 WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID, 1863 WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID, 1864 WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID, 1865 WMI_10_4_CONFIG_SMART_LOGGING_CMDID, 1866 WMI_10_4_DEBUG_FATAL_CONDITION_CMDID, 1867 WMI_10_4_GET_TSF_TIMER_CMDID, 1868 WMI_10_4_PDEV_GET_TPC_TABLE_CMDID, 1869 WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID, 1870 WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID, 1871 WMI_10_4_TDLS_SET_STATE_CMDID, 1872 WMI_10_4_TDLS_PEER_UPDATE_CMDID, 1873 WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID, 1874 WMI_10_4_PDEV_SEND_FD_CMDID, 1875 WMI_10_4_ENABLE_FILS_CMDID, 1876 WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID, 1877 WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID, 1878 WMI_10_4_RADAR_FOUND_CMDID, 1879 WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1, 1880 }; 1881 1882 enum wmi_10_4_event_id { 1883 WMI_10_4_SERVICE_READY_EVENTID = 0x8000, 1884 WMI_10_4_READY_EVENTID, 1885 WMI_10_4_DEBUG_MESG_EVENTID, 1886 WMI_10_4_START_EVENTID = 0x9000, 1887 WMI_10_4_END_EVENTID = 0x9FFF, 1888 WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID, 1889 WMI_10_4_ECHO_EVENTID, 1890 WMI_10_4_UPDATE_STATS_EVENTID, 1891 WMI_10_4_INST_RSSI_STATS_EVENTID, 1892 WMI_10_4_VDEV_START_RESP_EVENTID, 1893 WMI_10_4_VDEV_STANDBY_REQ_EVENTID, 1894 WMI_10_4_VDEV_RESUME_REQ_EVENTID, 1895 WMI_10_4_VDEV_STOPPED_EVENTID, 1896 WMI_10_4_PEER_STA_KICKOUT_EVENTID, 1897 WMI_10_4_HOST_SWBA_EVENTID, 1898 WMI_10_4_TBTTOFFSET_UPDATE_EVENTID, 1899 WMI_10_4_MGMT_RX_EVENTID, 1900 WMI_10_4_CHAN_INFO_EVENTID, 1901 WMI_10_4_PHYERR_EVENTID, 1902 WMI_10_4_ROAM_EVENTID, 1903 WMI_10_4_PROFILE_MATCH, 1904 WMI_10_4_DEBUG_PRINT_EVENTID, 1905 WMI_10_4_PDEV_QVIT_EVENTID, 1906 WMI_10_4_WLAN_PROFILE_DATA_EVENTID, 1907 WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID, 1908 WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID, 1909 WMI_10_4_RTT_ERROR_REPORT_EVENTID, 1910 WMI_10_4_RTT_KEEPALIVE_EVENTID, 1911 WMI_10_4_OEM_CAPABILITY_EVENTID, 1912 WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID, 1913 WMI_10_4_OEM_ERROR_REPORT_EVENTID, 1914 WMI_10_4_NAN_EVENTID, 1915 WMI_10_4_WOW_WAKEUP_HOST_EVENTID, 1916 WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID, 1917 WMI_10_4_GTK_REKEY_FAIL_EVENTID, 1918 WMI_10_4_DCS_INTERFERENCE_EVENTID, 1919 WMI_10_4_PDEV_TPC_CONFIG_EVENTID, 1920 WMI_10_4_CSA_HANDLING_EVENTID, 1921 WMI_10_4_GPIO_INPUT_EVENTID, 1922 WMI_10_4_PEER_RATECODE_LIST_EVENTID, 1923 WMI_10_4_GENERIC_BUFFER_EVENTID, 1924 WMI_10_4_MCAST_BUF_RELEASE_EVENTID, 1925 WMI_10_4_MCAST_LIST_AGEOUT_EVENTID, 1926 WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID, 1927 WMI_10_4_WDS_PEER_EVENTID, 1928 WMI_10_4_PEER_STA_PS_STATECHG_EVENTID, 1929 WMI_10_4_PDEV_FIPS_EVENTID, 1930 WMI_10_4_TT_STATS_EVENTID, 1931 WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID, 1932 WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID, 1933 WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID, 1934 WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID, 1935 WMI_10_4_PDEV_NFCAL_POWER_EVENTID, 1936 WMI_10_4_PDEV_TPC_EVENTID, 1937 WMI_10_4_PDEV_GET_AST_INFO_EVENTID, 1938 WMI_10_4_PDEV_TEMPERATURE_EVENTID, 1939 WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID, 1940 WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID, 1941 WMI_10_4_MU_REPORT_EVENTID, 1942 WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID, 1943 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID, 1944 WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID, 1945 WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID, 1946 WMI_10_4_ATF_PEER_STATS_EVENTID, 1947 WMI_10_4_PDEV_GET_RX_FILTER_EVENTID, 1948 WMI_10_4_NAC_RSSI_EVENTID, 1949 WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID, 1950 WMI_10_4_GET_TSF_TIMER_RESP_EVENTID, 1951 WMI_10_4_PDEV_TPC_TABLE_EVENTID, 1952 WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID, 1953 WMI_10_4_TDLS_PEER_EVENTID, 1954 WMI_10_4_HOST_SWFDA_EVENTID, 1955 WMI_10_4_ESP_ESTIMATE_EVENTID, 1956 WMI_10_4_DFS_STATUS_CHECK_EVENTID, 1957 WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1, 1958 }; 1959 1960 enum wmi_phy_mode { 1961 MODE_11A = 0, /* 11a Mode */ 1962 MODE_11G = 1, /* 11b/g Mode */ 1963 MODE_11B = 2, /* 11b Mode */ 1964 MODE_11GONLY = 3, /* 11g only Mode */ 1965 MODE_11NA_HT20 = 4, /* 11a HT20 mode */ 1966 MODE_11NG_HT20 = 5, /* 11g HT20 mode */ 1967 MODE_11NA_HT40 = 6, /* 11a HT40 mode */ 1968 MODE_11NG_HT40 = 7, /* 11g HT40 mode */ 1969 MODE_11AC_VHT20 = 8, 1970 MODE_11AC_VHT40 = 9, 1971 MODE_11AC_VHT80 = 10, 1972 /* MODE_11AC_VHT160 = 11, */ 1973 MODE_11AC_VHT20_2G = 11, 1974 MODE_11AC_VHT40_2G = 12, 1975 MODE_11AC_VHT80_2G = 13, 1976 MODE_11AC_VHT80_80 = 14, 1977 MODE_11AC_VHT160 = 15, 1978 MODE_UNKNOWN = 16, 1979 MODE_MAX = 16 1980 }; 1981 1982 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode) 1983 { 1984 switch (mode) { 1985 case MODE_11A: 1986 return "11a"; 1987 case MODE_11G: 1988 return "11g"; 1989 case MODE_11B: 1990 return "11b"; 1991 case MODE_11GONLY: 1992 return "11gonly"; 1993 case MODE_11NA_HT20: 1994 return "11na-ht20"; 1995 case MODE_11NG_HT20: 1996 return "11ng-ht20"; 1997 case MODE_11NA_HT40: 1998 return "11na-ht40"; 1999 case MODE_11NG_HT40: 2000 return "11ng-ht40"; 2001 case MODE_11AC_VHT20: 2002 return "11ac-vht20"; 2003 case MODE_11AC_VHT40: 2004 return "11ac-vht40"; 2005 case MODE_11AC_VHT80: 2006 return "11ac-vht80"; 2007 case MODE_11AC_VHT160: 2008 return "11ac-vht160"; 2009 case MODE_11AC_VHT80_80: 2010 return "11ac-vht80+80"; 2011 case MODE_11AC_VHT20_2G: 2012 return "11ac-vht20-2g"; 2013 case MODE_11AC_VHT40_2G: 2014 return "11ac-vht40-2g"; 2015 case MODE_11AC_VHT80_2G: 2016 return "11ac-vht80-2g"; 2017 case MODE_UNKNOWN: 2018 /* skip */ 2019 break; 2020 2021 /* no default handler to allow compiler to check that the 2022 * enum is fully handled 2023 */ 2024 } 2025 2026 return "<unknown>"; 2027 } 2028 2029 #define WMI_CHAN_LIST_TAG 0x1 2030 #define WMI_SSID_LIST_TAG 0x2 2031 #define WMI_BSSID_LIST_TAG 0x3 2032 #define WMI_IE_TAG 0x4 2033 2034 struct wmi_channel { 2035 __le32 mhz; 2036 __le32 band_center_freq1; 2037 __le32 band_center_freq2; /* valid for 11ac, 80plus80 */ 2038 union { 2039 __le32 flags; /* WMI_CHAN_FLAG_ */ 2040 struct { 2041 u8 mode; /* only 6 LSBs */ 2042 } __packed; 2043 } __packed; 2044 union { 2045 __le32 reginfo0; 2046 struct { 2047 /* note: power unit is 0.5 dBm */ 2048 u8 min_power; 2049 u8 max_power; 2050 u8 reg_power; 2051 u8 reg_classid; 2052 } __packed; 2053 } __packed; 2054 union { 2055 __le32 reginfo1; 2056 struct { 2057 u8 antenna_max; 2058 u8 max_tx_power; 2059 } __packed; 2060 } __packed; 2061 } __packed; 2062 2063 struct wmi_channel_arg { 2064 u32 freq; 2065 u32 band_center_freq1; 2066 u32 band_center_freq2; 2067 bool passive; 2068 bool allow_ibss; 2069 bool allow_ht; 2070 bool allow_vht; 2071 bool ht40plus; 2072 bool chan_radar; 2073 /* note: power unit is 0.5 dBm */ 2074 u32 min_power; 2075 u32 max_power; 2076 u32 max_reg_power; 2077 u32 max_antenna_gain; 2078 u32 reg_class_id; 2079 enum wmi_phy_mode mode; 2080 }; 2081 2082 enum wmi_channel_change_cause { 2083 WMI_CHANNEL_CHANGE_CAUSE_NONE = 0, 2084 WMI_CHANNEL_CHANGE_CAUSE_CSA, 2085 }; 2086 2087 #define WMI_CHAN_FLAG_HT40_PLUS (1 << 6) 2088 #define WMI_CHAN_FLAG_PASSIVE (1 << 7) 2089 #define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8) 2090 #define WMI_CHAN_FLAG_AP_DISABLED (1 << 9) 2091 #define WMI_CHAN_FLAG_DFS (1 << 10) 2092 #define WMI_CHAN_FLAG_ALLOW_HT (1 << 11) 2093 #define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12) 2094 2095 /* Indicate reason for channel switch */ 2096 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13) 2097 /* DFS required on channel for 2nd segment of VHT160 and VHT80+80*/ 2098 #define WMI_CHAN_FLAG_DFS_CFREQ2 (1 << 15) 2099 #define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */ 2100 2101 /* HT Capabilities*/ 2102 #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */ 2103 #define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */ 2104 #define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */ 2105 #define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */ 2106 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3 2107 #define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */ 2108 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4 2109 #define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */ 2110 #define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */ 2111 #define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */ 2112 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8 2113 #define WMI_HT_CAP_HT40_SGI 0x0800 2114 #define WMI_HT_CAP_RX_LDPC 0x1000 /* LDPC RX support */ 2115 #define WMI_HT_CAP_TX_LDPC 0x2000 /* LDPC TX support */ 2116 2117 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \ 2118 WMI_HT_CAP_HT20_SGI | \ 2119 WMI_HT_CAP_HT40_SGI | \ 2120 WMI_HT_CAP_TX_STBC | \ 2121 WMI_HT_CAP_RX_STBC | \ 2122 WMI_HT_CAP_LDPC) 2123 2124 /* 2125 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information 2126 * field. The fields not defined here are not supported, or reserved. 2127 * Do not change these masks and if you have to add new one follow the 2128 * bitmask as specified by 802.11ac draft. 2129 */ 2130 2131 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003 2132 #define WMI_VHT_CAP_RX_LDPC 0x00000010 2133 #define WMI_VHT_CAP_SGI_80MHZ 0x00000020 2134 #define WMI_VHT_CAP_SGI_160MHZ 0x00000040 2135 #define WMI_VHT_CAP_TX_STBC 0x00000080 2136 #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300 2137 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8 2138 #define WMI_VHT_CAP_SU_BFER 0x00000800 2139 #define WMI_VHT_CAP_SU_BFEE 0x00001000 2140 #define WMI_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000 2141 #define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13 2142 #define WMI_VHT_CAP_MAX_SND_DIM_MASK 0x00070000 2143 #define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16 2144 #define WMI_VHT_CAP_MU_BFER 0x00080000 2145 #define WMI_VHT_CAP_MU_BFEE 0x00100000 2146 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000 2147 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23 2148 #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000 2149 #define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000 2150 2151 /* The following also refer for max HT AMSDU */ 2152 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000 2153 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001 2154 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002 2155 2156 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \ 2157 WMI_VHT_CAP_RX_LDPC | \ 2158 WMI_VHT_CAP_SGI_80MHZ | \ 2159 WMI_VHT_CAP_TX_STBC | \ 2160 WMI_VHT_CAP_RX_STBC_MASK | \ 2161 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \ 2162 WMI_VHT_CAP_RX_FIXED_ANT | \ 2163 WMI_VHT_CAP_TX_FIXED_ANT) 2164 2165 /* 2166 * Interested readers refer to Rx/Tx MCS Map definition as defined in 2167 * 802.11ac 2168 */ 2169 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1)) 2170 #define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000 2171 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16 2172 2173 enum { 2174 REGDMN_MODE_11A = 0x00001, /* 11a channels */ 2175 REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */ 2176 REGDMN_MODE_11B = 0x00004, /* 11b channels */ 2177 REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */ 2178 REGDMN_MODE_11G = 0x00008, /* XXX historical */ 2179 REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */ 2180 REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */ 2181 REGDMN_MODE_XR = 0x00100, /* XR channels */ 2182 REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */ 2183 REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */ 2184 REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */ 2185 REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */ 2186 REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */ 2187 REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */ 2188 REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */ 2189 REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */ 2190 REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */ 2191 REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */ 2192 REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */ 2193 REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */ 2194 REGDMN_MODE_11AC_VHT160 = 0x200000, /* 5Ghz, VHT160 channels */ 2195 REGDMN_MODE_11AC_VHT80_80 = 0x400000, /* 5Ghz, VHT80+80 channels */ 2196 REGDMN_MODE_ALL = 0xffffffff 2197 }; 2198 2199 #define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001 2200 #define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002 2201 #define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004 2202 2203 /* regulatory capabilities */ 2204 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040 2205 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080 2206 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100 2207 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200 2208 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400 2209 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800 2210 2211 struct hal_reg_capabilities { 2212 /* regdomain value specified in EEPROM */ 2213 __le32 eeprom_rd; 2214 /*regdomain */ 2215 __le32 eeprom_rd_ext; 2216 /* CAP1 capabilities bit map. */ 2217 __le32 regcap1; 2218 /* REGDMN EEPROM CAP. */ 2219 __le32 regcap2; 2220 /* REGDMN MODE */ 2221 __le32 wireless_modes; 2222 __le32 low_2ghz_chan; 2223 __le32 high_2ghz_chan; 2224 __le32 low_5ghz_chan; 2225 __le32 high_5ghz_chan; 2226 } __packed; 2227 2228 enum wlan_mode_capability { 2229 WHAL_WLAN_11A_CAPABILITY = 0x1, 2230 WHAL_WLAN_11G_CAPABILITY = 0x2, 2231 WHAL_WLAN_11AG_CAPABILITY = 0x3, 2232 }; 2233 2234 /* structure used by FW for requesting host memory */ 2235 struct wlan_host_mem_req { 2236 /* ID of the request */ 2237 __le32 req_id; 2238 /* size of the of each unit */ 2239 __le32 unit_size; 2240 /* flags to indicate that 2241 * the number units is dependent 2242 * on number of resources(num vdevs num peers .. etc) 2243 */ 2244 __le32 num_unit_info; 2245 /* 2246 * actual number of units to allocate . if flags in the num_unit_info 2247 * indicate that number of units is tied to number of a particular 2248 * resource to allocate then num_units filed is set to 0 and host 2249 * will derive the number units from number of the resources it is 2250 * requesting. 2251 */ 2252 __le32 num_units; 2253 } __packed; 2254 2255 /* 2256 * The following struct holds optional payload for 2257 * wmi_service_ready_event,e.g., 11ac pass some of the 2258 * device capability to the host. 2259 */ 2260 struct wmi_service_ready_event { 2261 __le32 sw_version; 2262 __le32 sw_version_1; 2263 __le32 abi_version; 2264 /* WMI_PHY_CAPABILITY */ 2265 __le32 phy_capability; 2266 /* Maximum number of frag table entries that SW will populate less 1 */ 2267 __le32 max_frag_entry; 2268 __le32 wmi_service_bitmap[16]; 2269 __le32 num_rf_chains; 2270 /* 2271 * The following field is only valid for service type 2272 * WMI_SERVICE_11AC 2273 */ 2274 __le32 ht_cap_info; /* WMI HT Capability */ 2275 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2276 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2277 __le32 hw_min_tx_power; 2278 __le32 hw_max_tx_power; 2279 struct hal_reg_capabilities hal_reg_capabilities; 2280 __le32 sys_cap_info; 2281 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2282 /* 2283 * Max beacon and Probe Response IE offload size 2284 * (includes optional P2P IEs) 2285 */ 2286 __le32 max_bcn_ie_size; 2287 /* 2288 * request to host to allocate a chuck of memory and pss it down to FW 2289 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2290 * data structures. Only valid for low latency interfaces like PCIE 2291 * where FW can access this memory directly (or) by DMA. 2292 */ 2293 __le32 num_mem_reqs; 2294 struct wlan_host_mem_req mem_reqs[0]; 2295 } __packed; 2296 2297 /* This is the definition from 10.X firmware branch */ 2298 struct wmi_10x_service_ready_event { 2299 __le32 sw_version; 2300 __le32 abi_version; 2301 2302 /* WMI_PHY_CAPABILITY */ 2303 __le32 phy_capability; 2304 2305 /* Maximum number of frag table entries that SW will populate less 1 */ 2306 __le32 max_frag_entry; 2307 __le32 wmi_service_bitmap[16]; 2308 __le32 num_rf_chains; 2309 2310 /* 2311 * The following field is only valid for service type 2312 * WMI_SERVICE_11AC 2313 */ 2314 __le32 ht_cap_info; /* WMI HT Capability */ 2315 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */ 2316 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */ 2317 __le32 hw_min_tx_power; 2318 __le32 hw_max_tx_power; 2319 2320 struct hal_reg_capabilities hal_reg_capabilities; 2321 2322 __le32 sys_cap_info; 2323 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */ 2324 2325 /* 2326 * request to host to allocate a chuck of memory and pss it down to FW 2327 * via WM_INIT. FW uses this as FW extesnsion memory for saving its 2328 * data structures. Only valid for low latency interfaces like PCIE 2329 * where FW can access this memory directly (or) by DMA. 2330 */ 2331 __le32 num_mem_reqs; 2332 2333 struct wlan_host_mem_req mem_reqs[0]; 2334 } __packed; 2335 2336 #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ) 2337 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ) 2338 2339 struct wmi_ready_event { 2340 __le32 sw_version; 2341 __le32 abi_version; 2342 struct wmi_mac_addr mac_addr; 2343 __le32 status; 2344 } __packed; 2345 2346 struct wmi_resource_config { 2347 /* number of virtual devices (VAPs) to support */ 2348 __le32 num_vdevs; 2349 2350 /* number of peer nodes to support */ 2351 __le32 num_peers; 2352 2353 /* 2354 * In offload mode target supports features like WOW, chatter and 2355 * other protocol offloads. In order to support them some 2356 * functionalities like reorder buffering, PN checking need to be 2357 * done in target. This determines maximum number of peers supported 2358 * by target in offload mode 2359 */ 2360 __le32 num_offload_peers; 2361 2362 /* For target-based RX reordering */ 2363 __le32 num_offload_reorder_bufs; 2364 2365 /* number of keys per peer */ 2366 __le32 num_peer_keys; 2367 2368 /* total number of TX/RX data TIDs */ 2369 __le32 num_tids; 2370 2371 /* 2372 * max skid for resolving hash collisions 2373 * 2374 * The address search table is sparse, so that if two MAC addresses 2375 * result in the same hash value, the second of these conflicting 2376 * entries can slide to the next index in the address search table, 2377 * and use it, if it is unoccupied. This ast_skid_limit parameter 2378 * specifies the upper bound on how many subsequent indices to search 2379 * over to find an unoccupied space. 2380 */ 2381 __le32 ast_skid_limit; 2382 2383 /* 2384 * the nominal chain mask for transmit 2385 * 2386 * The chain mask may be modified dynamically, e.g. to operate AP 2387 * tx with a reduced number of chains if no clients are associated. 2388 * This configuration parameter specifies the nominal chain-mask that 2389 * should be used when not operating with a reduced set of tx chains. 2390 */ 2391 __le32 tx_chain_mask; 2392 2393 /* 2394 * the nominal chain mask for receive 2395 * 2396 * The chain mask may be modified dynamically, e.g. for a client 2397 * to use a reduced number of chains for receive if the traffic to 2398 * the client is low enough that it doesn't require downlink MIMO 2399 * or antenna diversity. 2400 * This configuration parameter specifies the nominal chain-mask that 2401 * should be used when not operating with a reduced set of rx chains. 2402 */ 2403 __le32 rx_chain_mask; 2404 2405 /* 2406 * what rx reorder timeout (ms) to use for the AC 2407 * 2408 * Each WMM access class (voice, video, best-effort, background) will 2409 * have its own timeout value to dictate how long to wait for missing 2410 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2411 * already been received. 2412 * This parameter specifies the timeout in milliseconds for each 2413 * class. 2414 */ 2415 __le32 rx_timeout_pri_vi; 2416 __le32 rx_timeout_pri_vo; 2417 __le32 rx_timeout_pri_be; 2418 __le32 rx_timeout_pri_bk; 2419 2420 /* 2421 * what mode the rx should decap packets to 2422 * 2423 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2424 * THis setting also determines the default TX behavior, however TX 2425 * behavior can be modified on a per VAP basis during VAP init 2426 */ 2427 __le32 rx_decap_mode; 2428 2429 /* what is the maximum number of scan requests that can be queued */ 2430 __le32 scan_max_pending_reqs; 2431 2432 /* maximum VDEV that could use BMISS offload */ 2433 __le32 bmiss_offload_max_vdev; 2434 2435 /* maximum VDEV that could use offload roaming */ 2436 __le32 roam_offload_max_vdev; 2437 2438 /* maximum AP profiles that would push to offload roaming */ 2439 __le32 roam_offload_max_ap_profiles; 2440 2441 /* 2442 * how many groups to use for mcast->ucast conversion 2443 * 2444 * The target's WAL maintains a table to hold information regarding 2445 * which peers belong to a given multicast group, so that if 2446 * multicast->unicast conversion is enabled, the target can convert 2447 * multicast tx frames to a series of unicast tx frames, to each 2448 * peer within the multicast group. 2449 This num_mcast_groups configuration parameter tells the target how 2450 * many multicast groups to provide storage for within its multicast 2451 * group membership table. 2452 */ 2453 __le32 num_mcast_groups; 2454 2455 /* 2456 * size to alloc for the mcast membership table 2457 * 2458 * This num_mcast_table_elems configuration parameter tells the 2459 * target how many peer elements it needs to provide storage for in 2460 * its multicast group membership table. 2461 * These multicast group membership table elements are shared by the 2462 * multicast groups stored within the table. 2463 */ 2464 __le32 num_mcast_table_elems; 2465 2466 /* 2467 * whether/how to do multicast->unicast conversion 2468 * 2469 * This configuration parameter specifies whether the target should 2470 * perform multicast --> unicast conversion on transmit, and if so, 2471 * what to do if it finds no entries in its multicast group 2472 * membership table for the multicast IP address in the tx frame. 2473 * Configuration value: 2474 * 0 -> Do not perform multicast to unicast conversion. 2475 * 1 -> Convert multicast frames to unicast, if the IP multicast 2476 * address from the tx frame is found in the multicast group 2477 * membership table. If the IP multicast address is not found, 2478 * drop the frame. 2479 * 2 -> Convert multicast frames to unicast, if the IP multicast 2480 * address from the tx frame is found in the multicast group 2481 * membership table. If the IP multicast address is not found, 2482 * transmit the frame as multicast. 2483 */ 2484 __le32 mcast2ucast_mode; 2485 2486 /* 2487 * how much memory to allocate for a tx PPDU dbg log 2488 * 2489 * This parameter controls how much memory the target will allocate 2490 * to store a log of tx PPDU meta-information (how large the PPDU 2491 * was, when it was sent, whether it was successful, etc.) 2492 */ 2493 __le32 tx_dbg_log_size; 2494 2495 /* how many AST entries to be allocated for WDS */ 2496 __le32 num_wds_entries; 2497 2498 /* 2499 * MAC DMA burst size, e.g., For target PCI limit can be 2500 * 0 -default, 1 256B 2501 */ 2502 __le32 dma_burst_size; 2503 2504 /* 2505 * Fixed delimiters to be inserted after every MPDU to 2506 * account for interface latency to avoid underrun. 2507 */ 2508 __le32 mac_aggr_delim; 2509 2510 /* 2511 * determine whether target is responsible for detecting duplicate 2512 * non-aggregate MPDU and timing out stale fragments. 2513 * 2514 * A-MPDU reordering is always performed on the target. 2515 * 2516 * 0: target responsible for frag timeout and dup checking 2517 * 1: host responsible for frag timeout and dup checking 2518 */ 2519 __le32 rx_skip_defrag_timeout_dup_detection_check; 2520 2521 /* 2522 * Configuration for VoW : 2523 * No of Video Nodes to be supported 2524 * and Max no of descriptors for each Video link (node). 2525 */ 2526 __le32 vow_config; 2527 2528 /* maximum VDEV that could use GTK offload */ 2529 __le32 gtk_offload_max_vdev; 2530 2531 /* Number of msdu descriptors target should use */ 2532 __le32 num_msdu_desc; 2533 2534 /* 2535 * Max. number of Tx fragments per MSDU 2536 * This parameter controls the max number of Tx fragments per MSDU. 2537 * This is sent by the target as part of the WMI_SERVICE_READY event 2538 * and is overridden by the OS shim as required. 2539 */ 2540 __le32 max_frag_entries; 2541 } __packed; 2542 2543 struct wmi_resource_config_10x { 2544 /* number of virtual devices (VAPs) to support */ 2545 __le32 num_vdevs; 2546 2547 /* number of peer nodes to support */ 2548 __le32 num_peers; 2549 2550 /* number of keys per peer */ 2551 __le32 num_peer_keys; 2552 2553 /* total number of TX/RX data TIDs */ 2554 __le32 num_tids; 2555 2556 /* 2557 * max skid for resolving hash collisions 2558 * 2559 * The address search table is sparse, so that if two MAC addresses 2560 * result in the same hash value, the second of these conflicting 2561 * entries can slide to the next index in the address search table, 2562 * and use it, if it is unoccupied. This ast_skid_limit parameter 2563 * specifies the upper bound on how many subsequent indices to search 2564 * over to find an unoccupied space. 2565 */ 2566 __le32 ast_skid_limit; 2567 2568 /* 2569 * the nominal chain mask for transmit 2570 * 2571 * The chain mask may be modified dynamically, e.g. to operate AP 2572 * tx with a reduced number of chains if no clients are associated. 2573 * This configuration parameter specifies the nominal chain-mask that 2574 * should be used when not operating with a reduced set of tx chains. 2575 */ 2576 __le32 tx_chain_mask; 2577 2578 /* 2579 * the nominal chain mask for receive 2580 * 2581 * The chain mask may be modified dynamically, e.g. for a client 2582 * to use a reduced number of chains for receive if the traffic to 2583 * the client is low enough that it doesn't require downlink MIMO 2584 * or antenna diversity. 2585 * This configuration parameter specifies the nominal chain-mask that 2586 * should be used when not operating with a reduced set of rx chains. 2587 */ 2588 __le32 rx_chain_mask; 2589 2590 /* 2591 * what rx reorder timeout (ms) to use for the AC 2592 * 2593 * Each WMM access class (voice, video, best-effort, background) will 2594 * have its own timeout value to dictate how long to wait for missing 2595 * rx MPDUs to arrive before flushing subsequent MPDUs that have 2596 * already been received. 2597 * This parameter specifies the timeout in milliseconds for each 2598 * class. 2599 */ 2600 __le32 rx_timeout_pri_vi; 2601 __le32 rx_timeout_pri_vo; 2602 __le32 rx_timeout_pri_be; 2603 __le32 rx_timeout_pri_bk; 2604 2605 /* 2606 * what mode the rx should decap packets to 2607 * 2608 * MAC can decap to RAW (no decap), native wifi or Ethernet types 2609 * THis setting also determines the default TX behavior, however TX 2610 * behavior can be modified on a per VAP basis during VAP init 2611 */ 2612 __le32 rx_decap_mode; 2613 2614 /* what is the maximum number of scan requests that can be queued */ 2615 __le32 scan_max_pending_reqs; 2616 2617 /* maximum VDEV that could use BMISS offload */ 2618 __le32 bmiss_offload_max_vdev; 2619 2620 /* maximum VDEV that could use offload roaming */ 2621 __le32 roam_offload_max_vdev; 2622 2623 /* maximum AP profiles that would push to offload roaming */ 2624 __le32 roam_offload_max_ap_profiles; 2625 2626 /* 2627 * how many groups to use for mcast->ucast conversion 2628 * 2629 * The target's WAL maintains a table to hold information regarding 2630 * which peers belong to a given multicast group, so that if 2631 * multicast->unicast conversion is enabled, the target can convert 2632 * multicast tx frames to a series of unicast tx frames, to each 2633 * peer within the multicast group. 2634 This num_mcast_groups configuration parameter tells the target how 2635 * many multicast groups to provide storage for within its multicast 2636 * group membership table. 2637 */ 2638 __le32 num_mcast_groups; 2639 2640 /* 2641 * size to alloc for the mcast membership table 2642 * 2643 * This num_mcast_table_elems configuration parameter tells the 2644 * target how many peer elements it needs to provide storage for in 2645 * its multicast group membership table. 2646 * These multicast group membership table elements are shared by the 2647 * multicast groups stored within the table. 2648 */ 2649 __le32 num_mcast_table_elems; 2650 2651 /* 2652 * whether/how to do multicast->unicast conversion 2653 * 2654 * This configuration parameter specifies whether the target should 2655 * perform multicast --> unicast conversion on transmit, and if so, 2656 * what to do if it finds no entries in its multicast group 2657 * membership table for the multicast IP address in the tx frame. 2658 * Configuration value: 2659 * 0 -> Do not perform multicast to unicast conversion. 2660 * 1 -> Convert multicast frames to unicast, if the IP multicast 2661 * address from the tx frame is found in the multicast group 2662 * membership table. If the IP multicast address is not found, 2663 * drop the frame. 2664 * 2 -> Convert multicast frames to unicast, if the IP multicast 2665 * address from the tx frame is found in the multicast group 2666 * membership table. If the IP multicast address is not found, 2667 * transmit the frame as multicast. 2668 */ 2669 __le32 mcast2ucast_mode; 2670 2671 /* 2672 * how much memory to allocate for a tx PPDU dbg log 2673 * 2674 * This parameter controls how much memory the target will allocate 2675 * to store a log of tx PPDU meta-information (how large the PPDU 2676 * was, when it was sent, whether it was successful, etc.) 2677 */ 2678 __le32 tx_dbg_log_size; 2679 2680 /* how many AST entries to be allocated for WDS */ 2681 __le32 num_wds_entries; 2682 2683 /* 2684 * MAC DMA burst size, e.g., For target PCI limit can be 2685 * 0 -default, 1 256B 2686 */ 2687 __le32 dma_burst_size; 2688 2689 /* 2690 * Fixed delimiters to be inserted after every MPDU to 2691 * account for interface latency to avoid underrun. 2692 */ 2693 __le32 mac_aggr_delim; 2694 2695 /* 2696 * determine whether target is responsible for detecting duplicate 2697 * non-aggregate MPDU and timing out stale fragments. 2698 * 2699 * A-MPDU reordering is always performed on the target. 2700 * 2701 * 0: target responsible for frag timeout and dup checking 2702 * 1: host responsible for frag timeout and dup checking 2703 */ 2704 __le32 rx_skip_defrag_timeout_dup_detection_check; 2705 2706 /* 2707 * Configuration for VoW : 2708 * No of Video Nodes to be supported 2709 * and Max no of descriptors for each Video link (node). 2710 */ 2711 __le32 vow_config; 2712 2713 /* Number of msdu descriptors target should use */ 2714 __le32 num_msdu_desc; 2715 2716 /* 2717 * Max. number of Tx fragments per MSDU 2718 * This parameter controls the max number of Tx fragments per MSDU. 2719 * This is sent by the target as part of the WMI_SERVICE_READY event 2720 * and is overridden by the OS shim as required. 2721 */ 2722 __le32 max_frag_entries; 2723 } __packed; 2724 2725 enum wmi_10_2_feature_mask { 2726 WMI_10_2_RX_BATCH_MODE = BIT(0), 2727 WMI_10_2_ATF_CONFIG = BIT(1), 2728 WMI_10_2_COEX_GPIO = BIT(3), 2729 WMI_10_2_BSS_CHAN_INFO = BIT(6), 2730 WMI_10_2_PEER_STATS = BIT(7), 2731 }; 2732 2733 struct wmi_resource_config_10_2 { 2734 struct wmi_resource_config_10x common; 2735 __le32 max_peer_ext_stats; 2736 __le32 smart_ant_cap; /* 0-disable, 1-enable */ 2737 __le32 bk_min_free; 2738 __le32 be_min_free; 2739 __le32 vi_min_free; 2740 __le32 vo_min_free; 2741 __le32 feature_mask; 2742 } __packed; 2743 2744 #define NUM_UNITS_IS_NUM_VDEVS BIT(0) 2745 #define NUM_UNITS_IS_NUM_PEERS BIT(1) 2746 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2) 2747 2748 struct wmi_resource_config_10_4 { 2749 /* Number of virtual devices (VAPs) to support */ 2750 __le32 num_vdevs; 2751 2752 /* Number of peer nodes to support */ 2753 __le32 num_peers; 2754 2755 /* Number of active peer nodes to support */ 2756 __le32 num_active_peers; 2757 2758 /* In offload mode, target supports features like WOW, chatter and other 2759 * protocol offloads. In order to support them some functionalities like 2760 * reorder buffering, PN checking need to be done in target. 2761 * This determines maximum number of peers supported by target in 2762 * offload mode. 2763 */ 2764 __le32 num_offload_peers; 2765 2766 /* Number of reorder buffers available for doing target based reorder 2767 * Rx reorder buffering 2768 */ 2769 __le32 num_offload_reorder_buffs; 2770 2771 /* Number of keys per peer */ 2772 __le32 num_peer_keys; 2773 2774 /* Total number of TX/RX data TIDs */ 2775 __le32 num_tids; 2776 2777 /* Max skid for resolving hash collisions. 2778 * The address search table is sparse, so that if two MAC addresses 2779 * result in the same hash value, the second of these conflicting 2780 * entries can slide to the next index in the address search table, 2781 * and use it, if it is unoccupied. This ast_skid_limit parameter 2782 * specifies the upper bound on how many subsequent indices to search 2783 * over to find an unoccupied space. 2784 */ 2785 __le32 ast_skid_limit; 2786 2787 /* The nominal chain mask for transmit. 2788 * The chain mask may be modified dynamically, e.g. to operate AP tx 2789 * with a reduced number of chains if no clients are associated. 2790 * This configuration parameter specifies the nominal chain-mask that 2791 * should be used when not operating with a reduced set of tx chains. 2792 */ 2793 __le32 tx_chain_mask; 2794 2795 /* The nominal chain mask for receive. 2796 * The chain mask may be modified dynamically, e.g. for a client to use 2797 * a reduced number of chains for receive if the traffic to the client 2798 * is low enough that it doesn't require downlink MIMO or antenna 2799 * diversity. This configuration parameter specifies the nominal 2800 * chain-mask that should be used when not operating with a reduced 2801 * set of rx chains. 2802 */ 2803 __le32 rx_chain_mask; 2804 2805 /* What rx reorder timeout (ms) to use for the AC. 2806 * Each WMM access class (voice, video, best-effort, background) will 2807 * have its own timeout value to dictate how long to wait for missing 2808 * rx MPDUs to arrive before flushing subsequent MPDUs that have already 2809 * been received. This parameter specifies the timeout in milliseconds 2810 * for each class. 2811 */ 2812 __le32 rx_timeout_pri[4]; 2813 2814 /* What mode the rx should decap packets to. 2815 * MAC can decap to RAW (no decap), native wifi or Ethernet types. 2816 * This setting also determines the default TX behavior, however TX 2817 * behavior can be modified on a per VAP basis during VAP init 2818 */ 2819 __le32 rx_decap_mode; 2820 2821 __le32 scan_max_pending_req; 2822 2823 __le32 bmiss_offload_max_vdev; 2824 2825 __le32 roam_offload_max_vdev; 2826 2827 __le32 roam_offload_max_ap_profiles; 2828 2829 /* How many groups to use for mcast->ucast conversion. 2830 * The target's WAL maintains a table to hold information regarding 2831 * which peers belong to a given multicast group, so that if 2832 * multicast->unicast conversion is enabled, the target can convert 2833 * multicast tx frames to a series of unicast tx frames, to each peer 2834 * within the multicast group. This num_mcast_groups configuration 2835 * parameter tells the target how many multicast groups to provide 2836 * storage for within its multicast group membership table. 2837 */ 2838 __le32 num_mcast_groups; 2839 2840 /* Size to alloc for the mcast membership table. 2841 * This num_mcast_table_elems configuration parameter tells the target 2842 * how many peer elements it needs to provide storage for in its 2843 * multicast group membership table. These multicast group membership 2844 * table elements are shared by the multicast groups stored within 2845 * the table. 2846 */ 2847 __le32 num_mcast_table_elems; 2848 2849 /* Whether/how to do multicast->unicast conversion. 2850 * This configuration parameter specifies whether the target should 2851 * perform multicast --> unicast conversion on transmit, and if so, 2852 * what to do if it finds no entries in its multicast group membership 2853 * table for the multicast IP address in the tx frame. 2854 * Configuration value: 2855 * 0 -> Do not perform multicast to unicast conversion. 2856 * 1 -> Convert multicast frames to unicast, if the IP multicast address 2857 * from the tx frame is found in the multicast group membership 2858 * table. If the IP multicast address is not found, drop the frame 2859 * 2 -> Convert multicast frames to unicast, if the IP multicast address 2860 * from the tx frame is found in the multicast group membership 2861 * table. If the IP multicast address is not found, transmit the 2862 * frame as multicast. 2863 */ 2864 __le32 mcast2ucast_mode; 2865 2866 /* How much memory to allocate for a tx PPDU dbg log. 2867 * This parameter controls how much memory the target will allocate to 2868 * store a log of tx PPDU meta-information (how large the PPDU was, 2869 * when it was sent, whether it was successful, etc.) 2870 */ 2871 __le32 tx_dbg_log_size; 2872 2873 /* How many AST entries to be allocated for WDS */ 2874 __le32 num_wds_entries; 2875 2876 /* MAC DMA burst size. 0 -default, 1 -256B */ 2877 __le32 dma_burst_size; 2878 2879 /* Fixed delimiters to be inserted after every MPDU to account for 2880 * interface latency to avoid underrun. 2881 */ 2882 __le32 mac_aggr_delim; 2883 2884 /* Determine whether target is responsible for detecting duplicate 2885 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering 2886 * is always performed on the target. 2887 * 2888 * 0: target responsible for frag timeout and dup checking 2889 * 1: host responsible for frag timeout and dup checking 2890 */ 2891 __le32 rx_skip_defrag_timeout_dup_detection_check; 2892 2893 /* Configuration for VoW : No of Video nodes to be supported and max 2894 * no of descriptors for each video link (node). 2895 */ 2896 __le32 vow_config; 2897 2898 /* Maximum vdev that could use gtk offload */ 2899 __le32 gtk_offload_max_vdev; 2900 2901 /* Number of msdu descriptors target should use */ 2902 __le32 num_msdu_desc; 2903 2904 /* Max number of tx fragments per MSDU. 2905 * This parameter controls the max number of tx fragments per MSDU. 2906 * This will passed by target as part of the WMI_SERVICE_READY event 2907 * and is overridden by the OS shim as required. 2908 */ 2909 __le32 max_frag_entries; 2910 2911 /* Max number of extended peer stats. 2912 * This parameter controls the max number of peers for which extended 2913 * statistics are supported by target 2914 */ 2915 __le32 max_peer_ext_stats; 2916 2917 /* Smart antenna capabilities information. 2918 * 1 - Smart antenna is enabled 2919 * 0 - Smart antenna is disabled 2920 * In future this can contain smart antenna specific capabilities. 2921 */ 2922 __le32 smart_ant_cap; 2923 2924 /* User can configure the buffers allocated for each AC (BE, BK, VI, VO) 2925 * during init. 2926 */ 2927 __le32 bk_minfree; 2928 __le32 be_minfree; 2929 __le32 vi_minfree; 2930 __le32 vo_minfree; 2931 2932 /* Rx batch mode capability. 2933 * 1 - Rx batch mode enabled 2934 * 0 - Rx batch mode disabled 2935 */ 2936 __le32 rx_batchmode; 2937 2938 /* Thermal throttling capability. 2939 * 1 - Capable of thermal throttling 2940 * 0 - Not capable of thermal throttling 2941 */ 2942 __le32 tt_support; 2943 2944 /* ATF configuration. 2945 * 1 - Enable ATF 2946 * 0 - Disable ATF 2947 */ 2948 __le32 atf_config; 2949 2950 /* Configure padding to manage IP header un-alignment 2951 * 1 - Enable padding 2952 * 0 - Disable padding 2953 */ 2954 __le32 iphdr_pad_config; 2955 2956 /* qwrap configuration (bits 15-0) 2957 * 1 - This is qwrap configuration 2958 * 0 - This is not qwrap 2959 * 2960 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables) 2961 * In order to get ack-RSSI reporting and to specify the tx-rate for 2962 * individual frames, this option must be enabled. This uses an extra 2963 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it. 2964 */ 2965 __le32 qwrap_config; 2966 } __packed; 2967 2968 enum wmi_coex_version { 2969 WMI_NO_COEX_VERSION_SUPPORT = 0, 2970 /* 3 wire coex support*/ 2971 WMI_COEX_VERSION_1 = 1, 2972 /* 2.5 wire coex support*/ 2973 WMI_COEX_VERSION_2 = 2, 2974 /* 2.5 wire coex with duty cycle support */ 2975 WMI_COEX_VERSION_3 = 3, 2976 /* 4 wire coex support*/ 2977 WMI_COEX_VERSION_4 = 4, 2978 }; 2979 2980 /** 2981 * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags 2982 * @WMI_10_4_LTEU_SUPPORT: LTEU config 2983 * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config 2984 * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan 2985 * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan 2986 * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats 2987 * @WMI_10_4_PEER_STATS: Per station stats 2988 * @WMI_10_4_VDEV_STATS: Per vdev stats 2989 * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable 2990 * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable 2991 * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable 2992 * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable 2993 * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host 2994 * enable/disable 2995 * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY:Explicit TDLS mode enable/disable 2996 * @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable 2997 */ 2998 enum wmi_10_4_feature_mask { 2999 WMI_10_4_LTEU_SUPPORT = BIT(0), 3000 WMI_10_4_COEX_GPIO_SUPPORT = BIT(1), 3001 WMI_10_4_AUX_RADIO_SPECTRAL_INTF = BIT(2), 3002 WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF = BIT(3), 3003 WMI_10_4_BSS_CHANNEL_INFO_64 = BIT(4), 3004 WMI_10_4_PEER_STATS = BIT(5), 3005 WMI_10_4_VDEV_STATS = BIT(6), 3006 WMI_10_4_TDLS = BIT(7), 3007 WMI_10_4_TDLS_OFFCHAN = BIT(8), 3008 WMI_10_4_TDLS_UAPSD_BUFFER_STA = BIT(9), 3009 WMI_10_4_TDLS_UAPSD_SLEEP_STA = BIT(10), 3010 WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11), 3011 WMI_10_4_TDLS_EXPLICIT_MODE_ONLY = BIT(12), 3012 WMI_10_4_TX_DATA_ACK_RSSI = BIT(16), 3013 WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT = BIT(17), 3014 WMI_10_4_REPORT_AIRTIME = BIT(18), 3015 3016 }; 3017 3018 struct wmi_ext_resource_config_10_4_cmd { 3019 /* contains enum wmi_host_platform_type */ 3020 __le32 host_platform_config; 3021 /* see enum wmi_10_4_feature_mask */ 3022 __le32 fw_feature_bitmap; 3023 /* WLAN priority GPIO number */ 3024 __le32 wlan_gpio_priority; 3025 /* see enum wmi_coex_version */ 3026 __le32 coex_version; 3027 /* COEX GPIO config */ 3028 __le32 coex_gpio_pin1; 3029 __le32 coex_gpio_pin2; 3030 __le32 coex_gpio_pin3; 3031 /* number of vdevs allowed to perform tdls */ 3032 __le32 num_tdls_vdevs; 3033 /* number of peers to track per TDLS vdev */ 3034 __le32 num_tdls_conn_table_entries; 3035 /* number of tdls sleep sta supported */ 3036 __le32 max_tdls_concurrent_sleep_sta; 3037 /* number of tdls buffer sta supported */ 3038 __le32 max_tdls_concurrent_buffer_sta; 3039 }; 3040 3041 /* structure describing host memory chunk. */ 3042 struct host_memory_chunk { 3043 /* id of the request that is passed up in service ready */ 3044 __le32 req_id; 3045 /* the physical address the memory chunk */ 3046 __le32 ptr; 3047 /* size of the chunk */ 3048 __le32 size; 3049 } __packed; 3050 3051 struct wmi_host_mem_chunks { 3052 __le32 count; 3053 /* some fw revisions require at least 1 chunk regardless of count */ 3054 struct host_memory_chunk items[1]; 3055 } __packed; 3056 3057 struct wmi_init_cmd { 3058 struct wmi_resource_config resource_config; 3059 struct wmi_host_mem_chunks mem_chunks; 3060 } __packed; 3061 3062 /* _10x structure is from 10.X FW API */ 3063 struct wmi_init_cmd_10x { 3064 struct wmi_resource_config_10x resource_config; 3065 struct wmi_host_mem_chunks mem_chunks; 3066 } __packed; 3067 3068 struct wmi_init_cmd_10_2 { 3069 struct wmi_resource_config_10_2 resource_config; 3070 struct wmi_host_mem_chunks mem_chunks; 3071 } __packed; 3072 3073 struct wmi_init_cmd_10_4 { 3074 struct wmi_resource_config_10_4 resource_config; 3075 struct wmi_host_mem_chunks mem_chunks; 3076 } __packed; 3077 3078 struct wmi_chan_list_entry { 3079 __le16 freq; 3080 u8 phy_mode; /* valid for 10.2 only */ 3081 u8 reserved; 3082 } __packed; 3083 3084 /* TLV for channel list */ 3085 struct wmi_chan_list { 3086 __le32 tag; /* WMI_CHAN_LIST_TAG */ 3087 __le32 num_chan; 3088 struct wmi_chan_list_entry channel_list[0]; 3089 } __packed; 3090 3091 struct wmi_bssid_list { 3092 __le32 tag; /* WMI_BSSID_LIST_TAG */ 3093 __le32 num_bssid; 3094 struct wmi_mac_addr bssid_list[0]; 3095 } __packed; 3096 3097 struct wmi_ie_data { 3098 __le32 tag; /* WMI_IE_TAG */ 3099 __le32 ie_len; 3100 u8 ie_data[0]; 3101 } __packed; 3102 3103 struct wmi_ssid { 3104 __le32 ssid_len; 3105 u8 ssid[32]; 3106 } __packed; 3107 3108 struct wmi_ssid_list { 3109 __le32 tag; /* WMI_SSID_LIST_TAG */ 3110 __le32 num_ssids; 3111 struct wmi_ssid ssids[0]; 3112 } __packed; 3113 3114 /* prefix used by scan requestor ids on the host */ 3115 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000 3116 3117 /* prefix used by scan request ids generated on the host */ 3118 /* host cycles through the lower 12 bits to generate ids */ 3119 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000 3120 3121 #define WLAN_SCAN_PARAMS_MAX_SSID 16 3122 #define WLAN_SCAN_PARAMS_MAX_BSSID 4 3123 #define WLAN_SCAN_PARAMS_MAX_IE_LEN 256 3124 3125 /* Values lower than this may be refused by some firmware revisions with a scan 3126 * completion with a timedout reason. 3127 */ 3128 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40 3129 3130 /* Scan priority numbers must be sequential, starting with 0 */ 3131 enum wmi_scan_priority { 3132 WMI_SCAN_PRIORITY_VERY_LOW = 0, 3133 WMI_SCAN_PRIORITY_LOW, 3134 WMI_SCAN_PRIORITY_MEDIUM, 3135 WMI_SCAN_PRIORITY_HIGH, 3136 WMI_SCAN_PRIORITY_VERY_HIGH, 3137 WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */ 3138 }; 3139 3140 struct wmi_start_scan_common { 3141 /* Scan ID */ 3142 __le32 scan_id; 3143 /* Scan requestor ID */ 3144 __le32 scan_req_id; 3145 /* VDEV id(interface) that is requesting scan */ 3146 __le32 vdev_id; 3147 /* Scan Priority, input to scan scheduler */ 3148 __le32 scan_priority; 3149 /* Scan events subscription */ 3150 __le32 notify_scan_events; 3151 /* dwell time in msec on active channels */ 3152 __le32 dwell_time_active; 3153 /* dwell time in msec on passive channels */ 3154 __le32 dwell_time_passive; 3155 /* 3156 * min time in msec on the BSS channel,only valid if atleast one 3157 * VDEV is active 3158 */ 3159 __le32 min_rest_time; 3160 /* 3161 * max rest time in msec on the BSS channel,only valid if at least 3162 * one VDEV is active 3163 */ 3164 /* 3165 * the scanner will rest on the bss channel at least min_rest_time 3166 * after min_rest_time the scanner will start checking for tx/rx 3167 * activity on all VDEVs. if there is no activity the scanner will 3168 * switch to off channel. if there is activity the scanner will let 3169 * the radio on the bss channel until max_rest_time expires.at 3170 * max_rest_time scanner will switch to off channel irrespective of 3171 * activity. activity is determined by the idle_time parameter. 3172 */ 3173 __le32 max_rest_time; 3174 /* 3175 * time before sending next set of probe requests. 3176 * The scanner keeps repeating probe requests transmission with 3177 * period specified by repeat_probe_time. 3178 * The number of probe requests specified depends on the ssid_list 3179 * and bssid_list 3180 */ 3181 __le32 repeat_probe_time; 3182 /* time in msec between 2 consequetive probe requests with in a set. */ 3183 __le32 probe_spacing_time; 3184 /* 3185 * data inactivity time in msec on bss channel that will be used by 3186 * scanner for measuring the inactivity. 3187 */ 3188 __le32 idle_time; 3189 /* maximum time in msec allowed for scan */ 3190 __le32 max_scan_time; 3191 /* 3192 * delay in msec before sending first probe request after switching 3193 * to a channel 3194 */ 3195 __le32 probe_delay; 3196 /* Scan control flags */ 3197 __le32 scan_ctrl_flags; 3198 } __packed; 3199 3200 struct wmi_start_scan_tlvs { 3201 /* TLV parameters. These includes channel list, ssid list, bssid list, 3202 * extra ies. 3203 */ 3204 u8 tlvs[0]; 3205 } __packed; 3206 3207 struct wmi_start_scan_cmd { 3208 struct wmi_start_scan_common common; 3209 __le32 burst_duration_ms; 3210 struct wmi_start_scan_tlvs tlvs; 3211 } __packed; 3212 3213 /* This is the definition from 10.X firmware branch */ 3214 struct wmi_10x_start_scan_cmd { 3215 struct wmi_start_scan_common common; 3216 struct wmi_start_scan_tlvs tlvs; 3217 } __packed; 3218 3219 struct wmi_ssid_arg { 3220 int len; 3221 const u8 *ssid; 3222 }; 3223 3224 struct wmi_bssid_arg { 3225 const u8 *bssid; 3226 }; 3227 3228 struct wmi_start_scan_arg { 3229 u32 scan_id; 3230 u32 scan_req_id; 3231 u32 vdev_id; 3232 u32 scan_priority; 3233 u32 notify_scan_events; 3234 u32 dwell_time_active; 3235 u32 dwell_time_passive; 3236 u32 min_rest_time; 3237 u32 max_rest_time; 3238 u32 repeat_probe_time; 3239 u32 probe_spacing_time; 3240 u32 idle_time; 3241 u32 max_scan_time; 3242 u32 probe_delay; 3243 u32 scan_ctrl_flags; 3244 u32 burst_duration_ms; 3245 3246 u32 ie_len; 3247 u32 n_channels; 3248 u32 n_ssids; 3249 u32 n_bssids; 3250 3251 u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN]; 3252 u16 channels[64]; 3253 struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID]; 3254 struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID]; 3255 struct wmi_mac_addr mac_addr; 3256 struct wmi_mac_addr mac_mask; 3257 }; 3258 3259 /* scan control flags */ 3260 3261 /* passively scan all channels including active channels */ 3262 #define WMI_SCAN_FLAG_PASSIVE 0x1 3263 /* add wild card ssid probe request even though ssid_list is specified. */ 3264 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2 3265 /* add cck rates to rates/xrate ie for the generated probe request */ 3266 #define WMI_SCAN_ADD_CCK_RATES 0x4 3267 /* add ofdm rates to rates/xrate ie for the generated probe request */ 3268 #define WMI_SCAN_ADD_OFDM_RATES 0x8 3269 /* To enable indication of Chan load and Noise floor to host */ 3270 #define WMI_SCAN_CHAN_STAT_EVENT 0x10 3271 /* Filter Probe request frames */ 3272 #define WMI_SCAN_FILTER_PROBE_REQ 0x20 3273 /* When set, DFS channels will not be scanned */ 3274 #define WMI_SCAN_BYPASS_DFS_CHN 0x40 3275 /* Different FW scan engine may choose to bail out on errors. 3276 * Allow the driver to have influence over that. 3277 */ 3278 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80 3279 3280 /* Use random MAC address for TA for Probe Request frame and add 3281 * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame. 3282 * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored. 3283 */ 3284 #define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ 0x1000 3285 3286 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */ 3287 #define WMI_SCAN_CLASS_MASK 0xFF000000 3288 3289 enum wmi_stop_scan_type { 3290 WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */ 3291 WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */ 3292 WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */ 3293 }; 3294 3295 struct wmi_stop_scan_cmd { 3296 __le32 scan_req_id; 3297 __le32 scan_id; 3298 __le32 req_type; 3299 __le32 vdev_id; 3300 } __packed; 3301 3302 struct wmi_stop_scan_arg { 3303 u32 req_id; 3304 enum wmi_stop_scan_type req_type; 3305 union { 3306 u32 scan_id; 3307 u32 vdev_id; 3308 } u; 3309 }; 3310 3311 struct wmi_scan_chan_list_cmd { 3312 __le32 num_scan_chans; 3313 struct wmi_channel chan_info[0]; 3314 } __packed; 3315 3316 struct wmi_scan_chan_list_arg { 3317 u32 n_channels; 3318 struct wmi_channel_arg *channels; 3319 }; 3320 3321 enum wmi_bss_filter { 3322 WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */ 3323 WMI_BSS_FILTER_ALL, /* all beacons forwarded */ 3324 WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */ 3325 WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */ 3326 WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */ 3327 WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */ 3328 WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */ 3329 WMI_BSS_FILTER_LAST_BSS, /* marker only */ 3330 }; 3331 3332 enum wmi_scan_event_type { 3333 WMI_SCAN_EVENT_STARTED = BIT(0), 3334 WMI_SCAN_EVENT_COMPLETED = BIT(1), 3335 WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2), 3336 WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3), 3337 WMI_SCAN_EVENT_DEQUEUED = BIT(4), 3338 /* possibly by high-prio scan */ 3339 WMI_SCAN_EVENT_PREEMPTED = BIT(5), 3340 WMI_SCAN_EVENT_START_FAILED = BIT(6), 3341 WMI_SCAN_EVENT_RESTARTED = BIT(7), 3342 WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8), 3343 WMI_SCAN_EVENT_MAX = BIT(15), 3344 }; 3345 3346 enum wmi_scan_completion_reason { 3347 WMI_SCAN_REASON_COMPLETED, 3348 WMI_SCAN_REASON_CANCELLED, 3349 WMI_SCAN_REASON_PREEMPTED, 3350 WMI_SCAN_REASON_TIMEDOUT, 3351 WMI_SCAN_REASON_INTERNAL_FAILURE, 3352 WMI_SCAN_REASON_MAX, 3353 }; 3354 3355 struct wmi_scan_event { 3356 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 3357 __le32 reason; /* %WMI_SCAN_REASON_ */ 3358 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 3359 __le32 scan_req_id; 3360 __le32 scan_id; 3361 __le32 vdev_id; 3362 } __packed; 3363 3364 /* 3365 * This defines how much headroom is kept in the 3366 * receive frame between the descriptor and the 3367 * payload, in order for the WMI PHY error and 3368 * management handler to insert header contents. 3369 * 3370 * This is in bytes. 3371 */ 3372 #define WMI_MGMT_RX_HDR_HEADROOM 52 3373 3374 /* 3375 * This event will be used for sending scan results 3376 * as well as rx mgmt frames to the host. The rx buffer 3377 * will be sent as part of this WMI event. It would be a 3378 * good idea to pass all the fields in the RX status 3379 * descriptor up to the host. 3380 */ 3381 struct wmi_mgmt_rx_hdr_v1 { 3382 __le32 channel; 3383 __le32 snr; 3384 __le32 rate; 3385 __le32 phy_mode; 3386 __le32 buf_len; 3387 __le32 status; /* %WMI_RX_STATUS_ */ 3388 } __packed; 3389 3390 struct wmi_mgmt_rx_hdr_v2 { 3391 struct wmi_mgmt_rx_hdr_v1 v1; 3392 __le32 rssi_ctl[4]; 3393 } __packed; 3394 3395 struct wmi_mgmt_rx_event_v1 { 3396 struct wmi_mgmt_rx_hdr_v1 hdr; 3397 u8 buf[0]; 3398 } __packed; 3399 3400 struct wmi_mgmt_rx_event_v2 { 3401 struct wmi_mgmt_rx_hdr_v2 hdr; 3402 u8 buf[0]; 3403 } __packed; 3404 3405 struct wmi_10_4_mgmt_rx_hdr { 3406 __le32 channel; 3407 __le32 snr; 3408 u8 rssi_ctl[4]; 3409 __le32 rate; 3410 __le32 phy_mode; 3411 __le32 buf_len; 3412 __le32 status; 3413 } __packed; 3414 3415 struct wmi_10_4_mgmt_rx_event { 3416 struct wmi_10_4_mgmt_rx_hdr hdr; 3417 u8 buf[0]; 3418 } __packed; 3419 3420 struct wmi_mgmt_rx_ext_info { 3421 __le64 rx_mac_timestamp; 3422 } __packed __aligned(4); 3423 3424 #define WMI_RX_STATUS_OK 0x00 3425 #define WMI_RX_STATUS_ERR_CRC 0x01 3426 #define WMI_RX_STATUS_ERR_DECRYPT 0x08 3427 #define WMI_RX_STATUS_ERR_MIC 0x10 3428 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20 3429 /* Extension data at the end of mgmt frame */ 3430 #define WMI_RX_STATUS_EXT_INFO 0x40 3431 3432 #define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26 3433 #define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24 3434 #define PHY_ERROR_GEN_RADAR 0x05 3435 3436 #define PHY_ERROR_10_4_RADAR_MASK 0x4 3437 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000 3438 3439 enum phy_err_type { 3440 PHY_ERROR_UNKNOWN, 3441 PHY_ERROR_SPECTRAL_SCAN, 3442 PHY_ERROR_FALSE_RADAR_EXT, 3443 PHY_ERROR_RADAR 3444 }; 3445 3446 struct wmi_phyerr { 3447 __le32 tsf_timestamp; 3448 __le16 freq1; 3449 __le16 freq2; 3450 u8 rssi_combined; 3451 u8 chan_width_mhz; 3452 u8 phy_err_code; 3453 u8 rsvd0; 3454 __le32 rssi_chains[4]; 3455 __le16 nf_chains[4]; 3456 __le32 buf_len; 3457 u8 buf[0]; 3458 } __packed; 3459 3460 struct wmi_phyerr_event { 3461 __le32 num_phyerrs; 3462 __le32 tsf_l32; 3463 __le32 tsf_u32; 3464 struct wmi_phyerr phyerrs[0]; 3465 } __packed; 3466 3467 struct wmi_10_4_phyerr_event { 3468 __le32 tsf_l32; 3469 __le32 tsf_u32; 3470 __le16 freq1; 3471 __le16 freq2; 3472 u8 rssi_combined; 3473 u8 chan_width_mhz; 3474 u8 phy_err_code; 3475 u8 rsvd0; 3476 __le32 rssi_chains[4]; 3477 __le16 nf_chains[4]; 3478 __le32 phy_err_mask[2]; 3479 __le32 tsf_timestamp; 3480 __le32 buf_len; 3481 u8 buf[0]; 3482 } __packed; 3483 3484 struct wmi_radar_found_info { 3485 __le32 pri_min; 3486 __le32 pri_max; 3487 __le32 width_min; 3488 __le32 width_max; 3489 __le32 sidx_min; 3490 __le32 sidx_max; 3491 } __packed; 3492 3493 enum wmi_radar_confirmation_status { 3494 /* Detected radar was due to SW pulses */ 3495 WMI_SW_RADAR_DETECTED = 0, 3496 3497 WMI_RADAR_DETECTION_FAIL = 1, 3498 3499 /* Real radar detected */ 3500 WMI_HW_RADAR_DETECTED = 2, 3501 }; 3502 3503 #define PHYERR_TLV_SIG 0xBB 3504 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB 3505 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8 3506 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9 3507 3508 struct phyerr_radar_report { 3509 __le32 reg0; /* RADAR_REPORT_REG0_* */ 3510 __le32 reg1; /* RADAR_REPORT_REG1_* */ 3511 } __packed; 3512 3513 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000 3514 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31 3515 3516 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000 3517 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30 3518 3519 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000 3520 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20 3521 3522 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000 3523 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16 3524 3525 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00 3526 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10 3527 3528 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF 3529 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0 3530 3531 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000 3532 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31 3533 3534 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000 3535 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24 3536 3537 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000 3538 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16 3539 3540 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00 3541 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8 3542 3543 #define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF 3544 #define RADAR_REPORT_REG1_PULSE_DUR_LSB 0 3545 3546 struct phyerr_fft_report { 3547 __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */ 3548 __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */ 3549 } __packed; 3550 3551 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000 3552 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23 3553 3554 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000 3555 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14 3556 3557 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000 3558 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12 3559 3560 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF 3561 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0 3562 3563 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000 3564 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26 3565 3566 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000 3567 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18 3568 3569 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00 3570 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8 3571 3572 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF 3573 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0 3574 3575 struct phyerr_tlv { 3576 __le16 len; 3577 u8 tag; 3578 u8 sig; 3579 } __packed; 3580 3581 #define DFS_RSSI_POSSIBLY_FALSE 50 3582 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40 3583 3584 struct wmi_mgmt_tx_hdr { 3585 __le32 vdev_id; 3586 struct wmi_mac_addr peer_macaddr; 3587 __le32 tx_rate; 3588 __le32 tx_power; 3589 __le32 buf_len; 3590 } __packed; 3591 3592 struct wmi_mgmt_tx_cmd { 3593 struct wmi_mgmt_tx_hdr hdr; 3594 u8 buf[0]; 3595 } __packed; 3596 3597 struct wmi_echo_event { 3598 __le32 value; 3599 } __packed; 3600 3601 struct wmi_echo_cmd { 3602 __le32 value; 3603 } __packed; 3604 3605 struct wmi_pdev_set_regdomain_cmd { 3606 __le32 reg_domain; 3607 __le32 reg_domain_2G; 3608 __le32 reg_domain_5G; 3609 __le32 conformance_test_limit_2G; 3610 __le32 conformance_test_limit_5G; 3611 } __packed; 3612 3613 enum wmi_dfs_region { 3614 /* Uninitialized dfs domain */ 3615 WMI_UNINIT_DFS_DOMAIN = 0, 3616 3617 /* FCC3 dfs domain */ 3618 WMI_FCC_DFS_DOMAIN = 1, 3619 3620 /* ETSI dfs domain */ 3621 WMI_ETSI_DFS_DOMAIN = 2, 3622 3623 /*Japan dfs domain */ 3624 WMI_MKK4_DFS_DOMAIN = 3, 3625 }; 3626 3627 struct wmi_pdev_set_regdomain_cmd_10x { 3628 __le32 reg_domain; 3629 __le32 reg_domain_2G; 3630 __le32 reg_domain_5G; 3631 __le32 conformance_test_limit_2G; 3632 __le32 conformance_test_limit_5G; 3633 3634 /* dfs domain from wmi_dfs_region */ 3635 __le32 dfs_domain; 3636 } __packed; 3637 3638 /* Command to set/unset chip in quiet mode */ 3639 struct wmi_pdev_set_quiet_cmd { 3640 /* period in TUs */ 3641 __le32 period; 3642 3643 /* duration in TUs */ 3644 __le32 duration; 3645 3646 /* offset in TUs */ 3647 __le32 next_start; 3648 3649 /* enable/disable */ 3650 __le32 enabled; 3651 } __packed; 3652 3653 /* 3654 * 802.11g protection mode. 3655 */ 3656 enum ath10k_protmode { 3657 ATH10K_PROT_NONE = 0, /* no protection */ 3658 ATH10K_PROT_CTSONLY = 1, /* CTS to self */ 3659 ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */ 3660 }; 3661 3662 enum wmi_rtscts_profile { 3663 WMI_RTSCTS_FOR_NO_RATESERIES = 0, 3664 WMI_RTSCTS_FOR_SECOND_RATESERIES, 3665 WMI_RTSCTS_ACROSS_SW_RETRIES 3666 }; 3667 3668 #define WMI_RTSCTS_ENABLED 1 3669 #define WMI_RTSCTS_SET_MASK 0x0f 3670 #define WMI_RTSCTS_SET_LSB 0 3671 3672 #define WMI_RTSCTS_PROFILE_MASK 0xf0 3673 #define WMI_RTSCTS_PROFILE_LSB 4 3674 3675 enum wmi_beacon_gen_mode { 3676 WMI_BEACON_STAGGERED_MODE = 0, 3677 WMI_BEACON_BURST_MODE = 1 3678 }; 3679 3680 enum wmi_csa_event_ies_present_flag { 3681 WMI_CSA_IE_PRESENT = 0x00000001, 3682 WMI_XCSA_IE_PRESENT = 0x00000002, 3683 WMI_WBW_IE_PRESENT = 0x00000004, 3684 WMI_CSWARP_IE_PRESENT = 0x00000008, 3685 }; 3686 3687 /* wmi CSA receive event from beacon frame */ 3688 struct wmi_csa_event { 3689 __le32 i_fc_dur; 3690 /* Bit 0-15: FC */ 3691 /* Bit 16-31: DUR */ 3692 struct wmi_mac_addr i_addr1; 3693 struct wmi_mac_addr i_addr2; 3694 __le32 csa_ie[2]; 3695 __le32 xcsa_ie[2]; 3696 __le32 wb_ie[2]; 3697 __le32 cswarp_ie; 3698 __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */ 3699 } __packed; 3700 3701 /* the definition of different PDEV parameters */ 3702 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3703 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500 3704 #define PEER_DEFAULT_STATS_UPDATE_PERIOD 500 3705 3706 struct wmi_pdev_param_map { 3707 u32 tx_chain_mask; 3708 u32 rx_chain_mask; 3709 u32 txpower_limit2g; 3710 u32 txpower_limit5g; 3711 u32 txpower_scale; 3712 u32 beacon_gen_mode; 3713 u32 beacon_tx_mode; 3714 u32 resmgr_offchan_mode; 3715 u32 protection_mode; 3716 u32 dynamic_bw; 3717 u32 non_agg_sw_retry_th; 3718 u32 agg_sw_retry_th; 3719 u32 sta_kickout_th; 3720 u32 ac_aggrsize_scaling; 3721 u32 ltr_enable; 3722 u32 ltr_ac_latency_be; 3723 u32 ltr_ac_latency_bk; 3724 u32 ltr_ac_latency_vi; 3725 u32 ltr_ac_latency_vo; 3726 u32 ltr_ac_latency_timeout; 3727 u32 ltr_sleep_override; 3728 u32 ltr_rx_override; 3729 u32 ltr_tx_activity_timeout; 3730 u32 l1ss_enable; 3731 u32 dsleep_enable; 3732 u32 pcielp_txbuf_flush; 3733 u32 pcielp_txbuf_watermark; 3734 u32 pcielp_txbuf_tmo_en; 3735 u32 pcielp_txbuf_tmo_value; 3736 u32 pdev_stats_update_period; 3737 u32 vdev_stats_update_period; 3738 u32 peer_stats_update_period; 3739 u32 bcnflt_stats_update_period; 3740 u32 pmf_qos; 3741 u32 arp_ac_override; 3742 u32 dcs; 3743 u32 ani_enable; 3744 u32 ani_poll_period; 3745 u32 ani_listen_period; 3746 u32 ani_ofdm_level; 3747 u32 ani_cck_level; 3748 u32 dyntxchain; 3749 u32 proxy_sta; 3750 u32 idle_ps_config; 3751 u32 power_gating_sleep; 3752 u32 fast_channel_reset; 3753 u32 burst_dur; 3754 u32 burst_enable; 3755 u32 cal_period; 3756 u32 aggr_burst; 3757 u32 rx_decap_mode; 3758 u32 smart_antenna_default_antenna; 3759 u32 igmpmld_override; 3760 u32 igmpmld_tid; 3761 u32 antenna_gain; 3762 u32 rx_filter; 3763 u32 set_mcast_to_ucast_tid; 3764 u32 proxy_sta_mode; 3765 u32 set_mcast2ucast_mode; 3766 u32 set_mcast2ucast_buffer; 3767 u32 remove_mcast2ucast_buffer; 3768 u32 peer_sta_ps_statechg_enable; 3769 u32 igmpmld_ac_override; 3770 u32 block_interbss; 3771 u32 set_disable_reset_cmdid; 3772 u32 set_msdu_ttl_cmdid; 3773 u32 set_ppdu_duration_cmdid; 3774 u32 txbf_sound_period_cmdid; 3775 u32 set_promisc_mode_cmdid; 3776 u32 set_burst_mode_cmdid; 3777 u32 en_stats; 3778 u32 mu_group_policy; 3779 u32 noise_detection; 3780 u32 noise_threshold; 3781 u32 dpd_enable; 3782 u32 set_mcast_bcast_echo; 3783 u32 atf_strict_sch; 3784 u32 atf_sched_duration; 3785 u32 ant_plzn; 3786 u32 mgmt_retry_limit; 3787 u32 sensitivity_level; 3788 u32 signed_txpower_2g; 3789 u32 signed_txpower_5g; 3790 u32 enable_per_tid_amsdu; 3791 u32 enable_per_tid_ampdu; 3792 u32 cca_threshold; 3793 u32 rts_fixed_rate; 3794 u32 pdev_reset; 3795 u32 wapi_mbssid_offset; 3796 u32 arp_srcaddr; 3797 u32 arp_dstaddr; 3798 u32 enable_btcoex; 3799 u32 rfkill_config; 3800 u32 rfkill_enable; 3801 u32 peer_stats_info_enable; 3802 }; 3803 3804 #define WMI_PDEV_PARAM_UNSUPPORTED 0 3805 3806 enum wmi_pdev_param { 3807 /* TX chain mask */ 3808 WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3809 /* RX chain mask */ 3810 WMI_PDEV_PARAM_RX_CHAIN_MASK, 3811 /* TX power limit for 2G Radio */ 3812 WMI_PDEV_PARAM_TXPOWER_LIMIT2G, 3813 /* TX power limit for 5G Radio */ 3814 WMI_PDEV_PARAM_TXPOWER_LIMIT5G, 3815 /* TX power scale */ 3816 WMI_PDEV_PARAM_TXPOWER_SCALE, 3817 /* Beacon generation mode . 0: host, 1: target */ 3818 WMI_PDEV_PARAM_BEACON_GEN_MODE, 3819 /* Beacon generation mode . 0: staggered 1: bursted */ 3820 WMI_PDEV_PARAM_BEACON_TX_MODE, 3821 /* 3822 * Resource manager off chan mode . 3823 * 0: turn off off chan mode. 1: turn on offchan mode 3824 */ 3825 WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3826 /* 3827 * Protection mode: 3828 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3829 */ 3830 WMI_PDEV_PARAM_PROTECTION_MODE, 3831 /* 3832 * Dynamic bandwidth - 0: disable, 1: enable 3833 * 3834 * When enabled HW rate control tries different bandwidths when 3835 * retransmitting frames. 3836 */ 3837 WMI_PDEV_PARAM_DYNAMIC_BW, 3838 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3839 WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3840 /* aggregrate sw retry threshold. 0-disable*/ 3841 WMI_PDEV_PARAM_AGG_SW_RETRY_TH, 3842 /* Station kickout threshold (non of consecutive failures).0-disable */ 3843 WMI_PDEV_PARAM_STA_KICKOUT_TH, 3844 /* Aggerate size scaling configuration per AC */ 3845 WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3846 /* LTR enable */ 3847 WMI_PDEV_PARAM_LTR_ENABLE, 3848 /* LTR latency for BE, in us */ 3849 WMI_PDEV_PARAM_LTR_AC_LATENCY_BE, 3850 /* LTR latency for BK, in us */ 3851 WMI_PDEV_PARAM_LTR_AC_LATENCY_BK, 3852 /* LTR latency for VI, in us */ 3853 WMI_PDEV_PARAM_LTR_AC_LATENCY_VI, 3854 /* LTR latency for VO, in us */ 3855 WMI_PDEV_PARAM_LTR_AC_LATENCY_VO, 3856 /* LTR AC latency timeout, in ms */ 3857 WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3858 /* LTR platform latency override, in us */ 3859 WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3860 /* LTR-RX override, in us */ 3861 WMI_PDEV_PARAM_LTR_RX_OVERRIDE, 3862 /* Tx activity timeout for LTR, in us */ 3863 WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3864 /* L1SS state machine enable */ 3865 WMI_PDEV_PARAM_L1SS_ENABLE, 3866 /* Deep sleep state machine enable */ 3867 WMI_PDEV_PARAM_DSLEEP_ENABLE, 3868 /* RX buffering flush enable */ 3869 WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 3870 /* RX buffering matermark */ 3871 WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 3872 /* RX buffering timeout enable */ 3873 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 3874 /* RX buffering timeout value */ 3875 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 3876 /* pdev level stats update period in ms */ 3877 WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3878 /* vdev level stats update period in ms */ 3879 WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3880 /* peer level stats update period in ms */ 3881 WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3882 /* beacon filter status update period */ 3883 WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3884 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3885 WMI_PDEV_PARAM_PMF_QOS, 3886 /* Access category on which ARP frames are sent */ 3887 WMI_PDEV_PARAM_ARP_AC_OVERRIDE, 3888 /* DCS configuration */ 3889 WMI_PDEV_PARAM_DCS, 3890 /* Enable/Disable ANI on target */ 3891 WMI_PDEV_PARAM_ANI_ENABLE, 3892 /* configure the ANI polling period */ 3893 WMI_PDEV_PARAM_ANI_POLL_PERIOD, 3894 /* configure the ANI listening period */ 3895 WMI_PDEV_PARAM_ANI_LISTEN_PERIOD, 3896 /* configure OFDM immunity level */ 3897 WMI_PDEV_PARAM_ANI_OFDM_LEVEL, 3898 /* configure CCK immunity level */ 3899 WMI_PDEV_PARAM_ANI_CCK_LEVEL, 3900 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3901 WMI_PDEV_PARAM_DYNTXCHAIN, 3902 /* Enable/Disable proxy STA */ 3903 WMI_PDEV_PARAM_PROXY_STA, 3904 /* Enable/Disable low power state when all VDEVs are inactive/idle. */ 3905 WMI_PDEV_PARAM_IDLE_PS_CONFIG, 3906 /* Enable/Disable power gating sleep */ 3907 WMI_PDEV_PARAM_POWER_GATING_SLEEP, 3908 }; 3909 3910 enum wmi_10x_pdev_param { 3911 /* TX chian mask */ 3912 WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 3913 /* RX chian mask */ 3914 WMI_10X_PDEV_PARAM_RX_CHAIN_MASK, 3915 /* TX power limit for 2G Radio */ 3916 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G, 3917 /* TX power limit for 5G Radio */ 3918 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G, 3919 /* TX power scale */ 3920 WMI_10X_PDEV_PARAM_TXPOWER_SCALE, 3921 /* Beacon generation mode . 0: host, 1: target */ 3922 WMI_10X_PDEV_PARAM_BEACON_GEN_MODE, 3923 /* Beacon generation mode . 0: staggered 1: bursted */ 3924 WMI_10X_PDEV_PARAM_BEACON_TX_MODE, 3925 /* 3926 * Resource manager off chan mode . 3927 * 0: turn off off chan mode. 1: turn on offchan mode 3928 */ 3929 WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 3930 /* 3931 * Protection mode: 3932 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS 3933 */ 3934 WMI_10X_PDEV_PARAM_PROTECTION_MODE, 3935 /* Dynamic bandwidth 0: disable 1: enable */ 3936 WMI_10X_PDEV_PARAM_DYNAMIC_BW, 3937 /* Non aggregrate/ 11g sw retry threshold.0-disable */ 3938 WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 3939 /* aggregrate sw retry threshold. 0-disable*/ 3940 WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH, 3941 /* Station kickout threshold (non of consecutive failures).0-disable */ 3942 WMI_10X_PDEV_PARAM_STA_KICKOUT_TH, 3943 /* Aggerate size scaling configuration per AC */ 3944 WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING, 3945 /* LTR enable */ 3946 WMI_10X_PDEV_PARAM_LTR_ENABLE, 3947 /* LTR latency for BE, in us */ 3948 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE, 3949 /* LTR latency for BK, in us */ 3950 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK, 3951 /* LTR latency for VI, in us */ 3952 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI, 3953 /* LTR latency for VO, in us */ 3954 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO, 3955 /* LTR AC latency timeout, in ms */ 3956 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 3957 /* LTR platform latency override, in us */ 3958 WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 3959 /* LTR-RX override, in us */ 3960 WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE, 3961 /* Tx activity timeout for LTR, in us */ 3962 WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 3963 /* L1SS state machine enable */ 3964 WMI_10X_PDEV_PARAM_L1SS_ENABLE, 3965 /* Deep sleep state machine enable */ 3966 WMI_10X_PDEV_PARAM_DSLEEP_ENABLE, 3967 /* pdev level stats update period in ms */ 3968 WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 3969 /* vdev level stats update period in ms */ 3970 WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 3971 /* peer level stats update period in ms */ 3972 WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 3973 /* beacon filter status update period */ 3974 WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 3975 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */ 3976 WMI_10X_PDEV_PARAM_PMF_QOS, 3977 /* Access category on which ARP and DHCP frames are sent */ 3978 WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE, 3979 /* DCS configuration */ 3980 WMI_10X_PDEV_PARAM_DCS, 3981 /* Enable/Disable ANI on target */ 3982 WMI_10X_PDEV_PARAM_ANI_ENABLE, 3983 /* configure the ANI polling period */ 3984 WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD, 3985 /* configure the ANI listening period */ 3986 WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD, 3987 /* configure OFDM immunity level */ 3988 WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL, 3989 /* configure CCK immunity level */ 3990 WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL, 3991 /* Enable/Disable CDD for 1x1 STAs in rate control module */ 3992 WMI_10X_PDEV_PARAM_DYNTXCHAIN, 3993 /* Enable/Disable Fast channel reset*/ 3994 WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET, 3995 /* Set Bursting DUR */ 3996 WMI_10X_PDEV_PARAM_BURST_DUR, 3997 /* Set Bursting Enable*/ 3998 WMI_10X_PDEV_PARAM_BURST_ENABLE, 3999 4000 /* following are available as of firmware 10.2 */ 4001 WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 4002 WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE, 4003 WMI_10X_PDEV_PARAM_IGMPMLD_TID, 4004 WMI_10X_PDEV_PARAM_ANTENNA_GAIN, 4005 WMI_10X_PDEV_PARAM_RX_DECAP_MODE, 4006 WMI_10X_PDEV_PARAM_RX_FILTER, 4007 WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID, 4008 WMI_10X_PDEV_PARAM_PROXY_STA_MODE, 4009 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE, 4010 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 4011 WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 4012 WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE, 4013 WMI_10X_PDEV_PARAM_RTS_FIXED_RATE, 4014 WMI_10X_PDEV_PARAM_CAL_PERIOD, 4015 WMI_10X_PDEV_PARAM_ATF_STRICT_SCH, 4016 WMI_10X_PDEV_PARAM_ATF_SCHED_DURATION, 4017 WMI_10X_PDEV_PARAM_SET_PROMISC_MODE_CMDID, 4018 WMI_10X_PDEV_PARAM_PDEV_RESET 4019 }; 4020 4021 enum wmi_10_4_pdev_param { 4022 WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1, 4023 WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK, 4024 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G, 4025 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G, 4026 WMI_10_4_PDEV_PARAM_TXPOWER_SCALE, 4027 WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE, 4028 WMI_10_4_PDEV_PARAM_BEACON_TX_MODE, 4029 WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE, 4030 WMI_10_4_PDEV_PARAM_PROTECTION_MODE, 4031 WMI_10_4_PDEV_PARAM_DYNAMIC_BW, 4032 WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH, 4033 WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH, 4034 WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH, 4035 WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING, 4036 WMI_10_4_PDEV_PARAM_LTR_ENABLE, 4037 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE, 4038 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK, 4039 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI, 4040 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO, 4041 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT, 4042 WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE, 4043 WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE, 4044 WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT, 4045 WMI_10_4_PDEV_PARAM_L1SS_ENABLE, 4046 WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE, 4047 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH, 4048 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK, 4049 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN, 4050 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE, 4051 WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD, 4052 WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD, 4053 WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD, 4054 WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD, 4055 WMI_10_4_PDEV_PARAM_PMF_QOS, 4056 WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE, 4057 WMI_10_4_PDEV_PARAM_DCS, 4058 WMI_10_4_PDEV_PARAM_ANI_ENABLE, 4059 WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD, 4060 WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD, 4061 WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL, 4062 WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL, 4063 WMI_10_4_PDEV_PARAM_DYNTXCHAIN, 4064 WMI_10_4_PDEV_PARAM_PROXY_STA, 4065 WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG, 4066 WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP, 4067 WMI_10_4_PDEV_PARAM_AGGR_BURST, 4068 WMI_10_4_PDEV_PARAM_RX_DECAP_MODE, 4069 WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET, 4070 WMI_10_4_PDEV_PARAM_BURST_DUR, 4071 WMI_10_4_PDEV_PARAM_BURST_ENABLE, 4072 WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA, 4073 WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE, 4074 WMI_10_4_PDEV_PARAM_IGMPMLD_TID, 4075 WMI_10_4_PDEV_PARAM_ANTENNA_GAIN, 4076 WMI_10_4_PDEV_PARAM_RX_FILTER, 4077 WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID, 4078 WMI_10_4_PDEV_PARAM_PROXY_STA_MODE, 4079 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE, 4080 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER, 4081 WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER, 4082 WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE, 4083 WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE, 4084 WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS, 4085 WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID, 4086 WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID, 4087 WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID, 4088 WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID, 4089 WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID, 4090 WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID, 4091 WMI_10_4_PDEV_PARAM_EN_STATS, 4092 WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY, 4093 WMI_10_4_PDEV_PARAM_NOISE_DETECTION, 4094 WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD, 4095 WMI_10_4_PDEV_PARAM_DPD_ENABLE, 4096 WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO, 4097 WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH, 4098 WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION, 4099 WMI_10_4_PDEV_PARAM_ANT_PLZN, 4100 WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT, 4101 WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL, 4102 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G, 4103 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G, 4104 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU, 4105 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU, 4106 WMI_10_4_PDEV_PARAM_CCA_THRESHOLD, 4107 WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE, 4108 WMI_10_4_PDEV_PARAM_CAL_PERIOD, 4109 WMI_10_4_PDEV_PARAM_PDEV_RESET, 4110 WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET, 4111 WMI_10_4_PDEV_PARAM_ARP_SRCADDR, 4112 WMI_10_4_PDEV_PARAM_ARP_DSTADDR, 4113 WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB, 4114 WMI_10_4_PDEV_PARAM_RX_BATCHMODE, 4115 WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY, 4116 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH, 4117 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR, 4118 WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE, 4119 WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE, 4120 WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY, 4121 WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, 4122 }; 4123 4124 struct wmi_pdev_set_param_cmd { 4125 __le32 param_id; 4126 __le32 param_value; 4127 } __packed; 4128 4129 struct wmi_pdev_set_base_macaddr_cmd { 4130 struct wmi_mac_addr mac_addr; 4131 } __packed; 4132 4133 /* valid period is 1 ~ 60000ms, unit in millisecond */ 4134 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000 4135 4136 struct wmi_pdev_get_tpc_config_cmd { 4137 /* parameter */ 4138 __le32 param; 4139 } __packed; 4140 4141 #define WMI_TPC_CONFIG_PARAM 1 4142 #define WMI_TPC_FINAL_RATE_MAX 240 4143 #define WMI_TPC_TX_N_CHAIN 4 4144 #define WMI_TPC_RATE_MAX (WMI_TPC_TX_N_CHAIN * 65) 4145 #define WMI_TPC_PREAM_TABLE_MAX 10 4146 #define WMI_TPC_FLAG 3 4147 #define WMI_TPC_BUF_SIZE 10 4148 #define WMI_TPC_BEAMFORMING 2 4149 4150 enum wmi_tpc_table_type { 4151 WMI_TPC_TABLE_TYPE_CDD = 0, 4152 WMI_TPC_TABLE_TYPE_STBC = 1, 4153 WMI_TPC_TABLE_TYPE_TXBF = 2, 4154 }; 4155 4156 enum wmi_tpc_config_event_flag { 4157 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1, 4158 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2, 4159 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4, 4160 }; 4161 4162 struct wmi_pdev_tpc_config_event { 4163 __le32 reg_domain; 4164 __le32 chan_freq; 4165 __le32 phy_mode; 4166 __le32 twice_antenna_reduction; 4167 __le32 twice_max_rd_power; 4168 a_sle32 twice_antenna_gain; 4169 __le32 power_limit; 4170 __le32 rate_max; 4171 __le32 num_tx_chain; 4172 __le32 ctl; 4173 __le32 flags; 4174 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 4175 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4176 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4177 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4178 u8 rates_array[WMI_TPC_RATE_MAX]; 4179 } __packed; 4180 4181 /* Transmit power scale factor. */ 4182 enum wmi_tp_scale { 4183 WMI_TP_SCALE_MAX = 0, /* no scaling (default) */ 4184 WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */ 4185 WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */ 4186 WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */ 4187 WMI_TP_SCALE_MIN = 4, /* min, but still on */ 4188 WMI_TP_SCALE_SIZE = 5, /* max num of enum */ 4189 }; 4190 4191 struct wmi_pdev_tpc_final_table_event { 4192 __le32 reg_domain; 4193 __le32 chan_freq; 4194 __le32 phy_mode; 4195 __le32 twice_antenna_reduction; 4196 __le32 twice_max_rd_power; 4197 a_sle32 twice_antenna_gain; 4198 __le32 power_limit; 4199 __le32 rate_max; 4200 __le32 num_tx_chain; 4201 __le32 ctl; 4202 __le32 flags; 4203 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN]; 4204 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4205 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4206 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN]; 4207 u8 rates_array[WMI_TPC_FINAL_RATE_MAX]; 4208 u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN] 4209 [WMI_TPC_TX_N_CHAIN]; 4210 } __packed; 4211 4212 struct wmi_pdev_get_tpc_table_cmd { 4213 __le32 param; 4214 } __packed; 4215 4216 enum wmi_tpc_pream_2ghz { 4217 WMI_TPC_PREAM_2GHZ_CCK = 0, 4218 WMI_TPC_PREAM_2GHZ_OFDM, 4219 WMI_TPC_PREAM_2GHZ_HT20, 4220 WMI_TPC_PREAM_2GHZ_HT40, 4221 WMI_TPC_PREAM_2GHZ_VHT20, 4222 WMI_TPC_PREAM_2GHZ_VHT40, 4223 WMI_TPC_PREAM_2GHZ_VHT80, 4224 }; 4225 4226 enum wmi_tpc_pream_5ghz { 4227 WMI_TPC_PREAM_5GHZ_OFDM = 1, 4228 WMI_TPC_PREAM_5GHZ_HT20, 4229 WMI_TPC_PREAM_5GHZ_HT40, 4230 WMI_TPC_PREAM_5GHZ_VHT20, 4231 WMI_TPC_PREAM_5GHZ_VHT40, 4232 WMI_TPC_PREAM_5GHZ_VHT80, 4233 WMI_TPC_PREAM_5GHZ_HTCUP, 4234 }; 4235 4236 #define WMI_PEER_PS_STATE_DISABLED 2 4237 4238 struct wmi_peer_sta_ps_state_chg_event { 4239 struct wmi_mac_addr peer_macaddr; 4240 __le32 peer_ps_state; 4241 } __packed; 4242 4243 struct wmi_pdev_chanlist_update_event { 4244 /* number of channels */ 4245 __le32 num_chan; 4246 /* array of channels */ 4247 struct wmi_channel channel_list[1]; 4248 } __packed; 4249 4250 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32) 4251 4252 struct wmi_debug_mesg_event { 4253 /* message buffer, NULL terminated */ 4254 char bufp[WMI_MAX_DEBUG_MESG]; 4255 } __packed; 4256 4257 enum { 4258 /* P2P device */ 4259 VDEV_SUBTYPE_P2PDEV = 0, 4260 /* P2P client */ 4261 VDEV_SUBTYPE_P2PCLI, 4262 /* P2P GO */ 4263 VDEV_SUBTYPE_P2PGO, 4264 /* BT3.0 HS */ 4265 VDEV_SUBTYPE_BT, 4266 }; 4267 4268 struct wmi_pdev_set_channel_cmd { 4269 /* idnore power , only use flags , mode and freq */ 4270 struct wmi_channel chan; 4271 } __packed; 4272 4273 struct wmi_pdev_pktlog_enable_cmd { 4274 __le32 ev_bitmap; 4275 } __packed; 4276 4277 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */ 4278 #define WMI_DSCP_MAP_MAX (64) 4279 struct wmi_pdev_set_dscp_tid_map_cmd { 4280 /* map indicating DSCP to TID conversion */ 4281 __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX]; 4282 } __packed; 4283 4284 enum mcast_bcast_rate_id { 4285 WMI_SET_MCAST_RATE, 4286 WMI_SET_BCAST_RATE 4287 }; 4288 4289 struct mcast_bcast_rate { 4290 enum mcast_bcast_rate_id rate_id; 4291 __le32 rate; 4292 } __packed; 4293 4294 struct wmi_wmm_params { 4295 __le32 cwmin; 4296 __le32 cwmax; 4297 __le32 aifs; 4298 __le32 txop; 4299 __le32 acm; 4300 __le32 no_ack; 4301 } __packed; 4302 4303 struct wmi_pdev_set_wmm_params { 4304 struct wmi_wmm_params ac_be; 4305 struct wmi_wmm_params ac_bk; 4306 struct wmi_wmm_params ac_vi; 4307 struct wmi_wmm_params ac_vo; 4308 } __packed; 4309 4310 struct wmi_wmm_params_arg { 4311 u32 cwmin; 4312 u32 cwmax; 4313 u32 aifs; 4314 u32 txop; 4315 u32 acm; 4316 u32 no_ack; 4317 }; 4318 4319 struct wmi_wmm_params_all_arg { 4320 struct wmi_wmm_params_arg ac_be; 4321 struct wmi_wmm_params_arg ac_bk; 4322 struct wmi_wmm_params_arg ac_vi; 4323 struct wmi_wmm_params_arg ac_vo; 4324 }; 4325 4326 struct wmi_pdev_stats_tx { 4327 /* Num HTT cookies queued to dispatch list */ 4328 __le32 comp_queued; 4329 4330 /* Num HTT cookies dispatched */ 4331 __le32 comp_delivered; 4332 4333 /* Num MSDU queued to WAL */ 4334 __le32 msdu_enqued; 4335 4336 /* Num MPDU queue to WAL */ 4337 __le32 mpdu_enqued; 4338 4339 /* Num MSDUs dropped by WMM limit */ 4340 __le32 wmm_drop; 4341 4342 /* Num Local frames queued */ 4343 __le32 local_enqued; 4344 4345 /* Num Local frames done */ 4346 __le32 local_freed; 4347 4348 /* Num queued to HW */ 4349 __le32 hw_queued; 4350 4351 /* Num PPDU reaped from HW */ 4352 __le32 hw_reaped; 4353 4354 /* Num underruns */ 4355 __le32 underrun; 4356 4357 /* Num PPDUs cleaned up in TX abort */ 4358 __le32 tx_abort; 4359 4360 /* Num MPDUs requed by SW */ 4361 __le32 mpdus_requed; 4362 4363 /* excessive retries */ 4364 __le32 tx_ko; 4365 4366 /* data hw rate code */ 4367 __le32 data_rc; 4368 4369 /* Scheduler self triggers */ 4370 __le32 self_triggers; 4371 4372 /* frames dropped due to excessive sw retries */ 4373 __le32 sw_retry_failure; 4374 4375 /* illegal rate phy errors */ 4376 __le32 illgl_rate_phy_err; 4377 4378 /* wal pdev continuous xretry */ 4379 __le32 pdev_cont_xretry; 4380 4381 /* wal pdev continous xretry */ 4382 __le32 pdev_tx_timeout; 4383 4384 /* wal pdev resets */ 4385 __le32 pdev_resets; 4386 4387 /* frames dropped due to non-availability of stateless TIDs */ 4388 __le32 stateless_tid_alloc_failure; 4389 4390 __le32 phy_underrun; 4391 4392 /* MPDU is more than txop limit */ 4393 __le32 txop_ovf; 4394 } __packed; 4395 4396 struct wmi_10_4_pdev_stats_tx { 4397 /* Num HTT cookies queued to dispatch list */ 4398 __le32 comp_queued; 4399 4400 /* Num HTT cookies dispatched */ 4401 __le32 comp_delivered; 4402 4403 /* Num MSDU queued to WAL */ 4404 __le32 msdu_enqued; 4405 4406 /* Num MPDU queue to WAL */ 4407 __le32 mpdu_enqued; 4408 4409 /* Num MSDUs dropped by WMM limit */ 4410 __le32 wmm_drop; 4411 4412 /* Num Local frames queued */ 4413 __le32 local_enqued; 4414 4415 /* Num Local frames done */ 4416 __le32 local_freed; 4417 4418 /* Num queued to HW */ 4419 __le32 hw_queued; 4420 4421 /* Num PPDU reaped from HW */ 4422 __le32 hw_reaped; 4423 4424 /* Num underruns */ 4425 __le32 underrun; 4426 4427 /* HW Paused. */ 4428 __le32 hw_paused; 4429 4430 /* Num PPDUs cleaned up in TX abort */ 4431 __le32 tx_abort; 4432 4433 /* Num MPDUs requed by SW */ 4434 __le32 mpdus_requed; 4435 4436 /* excessive retries */ 4437 __le32 tx_ko; 4438 4439 /* data hw rate code */ 4440 __le32 data_rc; 4441 4442 /* Scheduler self triggers */ 4443 __le32 self_triggers; 4444 4445 /* frames dropped due to excessive sw retries */ 4446 __le32 sw_retry_failure; 4447 4448 /* illegal rate phy errors */ 4449 __le32 illgl_rate_phy_err; 4450 4451 /* wal pdev continuous xretry */ 4452 __le32 pdev_cont_xretry; 4453 4454 /* wal pdev tx timeouts */ 4455 __le32 pdev_tx_timeout; 4456 4457 /* wal pdev resets */ 4458 __le32 pdev_resets; 4459 4460 /* frames dropped due to non-availability of stateless TIDs */ 4461 __le32 stateless_tid_alloc_failure; 4462 4463 __le32 phy_underrun; 4464 4465 /* MPDU is more than txop limit */ 4466 __le32 txop_ovf; 4467 4468 /* Number of Sequences posted */ 4469 __le32 seq_posted; 4470 4471 /* Number of Sequences failed queueing */ 4472 __le32 seq_failed_queueing; 4473 4474 /* Number of Sequences completed */ 4475 __le32 seq_completed; 4476 4477 /* Number of Sequences restarted */ 4478 __le32 seq_restarted; 4479 4480 /* Number of MU Sequences posted */ 4481 __le32 mu_seq_posted; 4482 4483 /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */ 4484 __le32 mpdus_sw_flush; 4485 4486 /* Num MPDUs filtered by HW, all filter condition (TTL expired) */ 4487 __le32 mpdus_hw_filter; 4488 4489 /* Num MPDUs truncated by PDG 4490 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw) 4491 */ 4492 __le32 mpdus_truncated; 4493 4494 /* Num MPDUs that was tried but didn't receive ACK or BA */ 4495 __le32 mpdus_ack_failed; 4496 4497 /* Num MPDUs that was dropped due to expiry. */ 4498 __le32 mpdus_expired; 4499 } __packed; 4500 4501 struct wmi_pdev_stats_rx { 4502 /* Cnts any change in ring routing mid-ppdu */ 4503 __le32 mid_ppdu_route_change; 4504 4505 /* Total number of statuses processed */ 4506 __le32 status_rcvd; 4507 4508 /* Extra frags on rings 0-3 */ 4509 __le32 r0_frags; 4510 __le32 r1_frags; 4511 __le32 r2_frags; 4512 __le32 r3_frags; 4513 4514 /* MSDUs / MPDUs delivered to HTT */ 4515 __le32 htt_msdus; 4516 __le32 htt_mpdus; 4517 4518 /* MSDUs / MPDUs delivered to local stack */ 4519 __le32 loc_msdus; 4520 __le32 loc_mpdus; 4521 4522 /* AMSDUs that have more MSDUs than the status ring size */ 4523 __le32 oversize_amsdu; 4524 4525 /* Number of PHY errors */ 4526 __le32 phy_errs; 4527 4528 /* Number of PHY errors drops */ 4529 __le32 phy_err_drop; 4530 4531 /* Number of mpdu errors - FCS, MIC, ENC etc. */ 4532 __le32 mpdu_errs; 4533 } __packed; 4534 4535 struct wmi_pdev_stats_peer { 4536 /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */ 4537 __le32 dummy; 4538 } __packed; 4539 4540 enum wmi_stats_id { 4541 WMI_STAT_PEER = BIT(0), 4542 WMI_STAT_AP = BIT(1), 4543 WMI_STAT_PDEV = BIT(2), 4544 WMI_STAT_VDEV = BIT(3), 4545 WMI_STAT_BCNFLT = BIT(4), 4546 WMI_STAT_VDEV_RATE = BIT(5), 4547 }; 4548 4549 enum wmi_10_4_stats_id { 4550 WMI_10_4_STAT_PEER = BIT(0), 4551 WMI_10_4_STAT_AP = BIT(1), 4552 WMI_10_4_STAT_INST = BIT(2), 4553 WMI_10_4_STAT_PEER_EXTD = BIT(3), 4554 WMI_10_4_STAT_VDEV_EXTD = BIT(4), 4555 }; 4556 4557 enum wmi_tlv_stats_id { 4558 WMI_TLV_STAT_PEER = BIT(0), 4559 WMI_TLV_STAT_AP = BIT(1), 4560 WMI_TLV_STAT_PDEV = BIT(2), 4561 WMI_TLV_STAT_VDEV = BIT(3), 4562 WMI_TLV_STAT_PEER_EXTD = BIT(10), 4563 }; 4564 4565 struct wlan_inst_rssi_args { 4566 __le16 cfg_retry_count; 4567 __le16 retry_count; 4568 }; 4569 4570 struct wmi_request_stats_cmd { 4571 __le32 stats_id; 4572 4573 __le32 vdev_id; 4574 4575 /* peer MAC address */ 4576 struct wmi_mac_addr peer_macaddr; 4577 4578 /* Instantaneous RSSI arguments */ 4579 struct wlan_inst_rssi_args inst_rssi_args; 4580 } __packed; 4581 4582 /* Suspend option */ 4583 enum { 4584 /* suspend */ 4585 WMI_PDEV_SUSPEND, 4586 4587 /* suspend and disable all interrupts */ 4588 WMI_PDEV_SUSPEND_AND_DISABLE_INTR, 4589 }; 4590 4591 struct wmi_pdev_suspend_cmd { 4592 /* suspend option sent to target */ 4593 __le32 suspend_opt; 4594 } __packed; 4595 4596 struct wmi_stats_event { 4597 __le32 stats_id; /* WMI_STAT_ */ 4598 /* 4599 * number of pdev stats event structures 4600 * (wmi_pdev_stats) 0 or 1 4601 */ 4602 __le32 num_pdev_stats; 4603 /* 4604 * number of vdev stats event structures 4605 * (wmi_vdev_stats) 0 or max vdevs 4606 */ 4607 __le32 num_vdev_stats; 4608 /* 4609 * number of peer stats event structures 4610 * (wmi_peer_stats) 0 or max peers 4611 */ 4612 __le32 num_peer_stats; 4613 __le32 num_bcnflt_stats; 4614 /* 4615 * followed by 4616 * num_pdev_stats * size of(struct wmi_pdev_stats) 4617 * num_vdev_stats * size of(struct wmi_vdev_stats) 4618 * num_peer_stats * size of(struct wmi_peer_stats) 4619 * 4620 * By having a zero sized array, the pointer to data area 4621 * becomes available without increasing the struct size 4622 */ 4623 u8 data[0]; 4624 } __packed; 4625 4626 struct wmi_10_2_stats_event { 4627 __le32 stats_id; /* %WMI_REQUEST_ */ 4628 __le32 num_pdev_stats; 4629 __le32 num_pdev_ext_stats; 4630 __le32 num_vdev_stats; 4631 __le32 num_peer_stats; 4632 __le32 num_bcnflt_stats; 4633 u8 data[0]; 4634 } __packed; 4635 4636 /* 4637 * PDEV statistics 4638 * TODO: add all PDEV stats here 4639 */ 4640 struct wmi_pdev_stats_base { 4641 __le32 chan_nf; 4642 __le32 tx_frame_count; /* Cycles spent transmitting frames */ 4643 __le32 rx_frame_count; /* Cycles spent receiving frames */ 4644 __le32 rx_clear_count; /* Total channel busy time, evidently */ 4645 __le32 cycle_count; /* Total on-channel time */ 4646 __le32 phy_err_count; 4647 __le32 chan_tx_pwr; 4648 } __packed; 4649 4650 struct wmi_pdev_stats { 4651 struct wmi_pdev_stats_base base; 4652 struct wmi_pdev_stats_tx tx; 4653 struct wmi_pdev_stats_rx rx; 4654 struct wmi_pdev_stats_peer peer; 4655 } __packed; 4656 4657 struct wmi_pdev_stats_extra { 4658 __le32 ack_rx_bad; 4659 __le32 rts_bad; 4660 __le32 rts_good; 4661 __le32 fcs_bad; 4662 __le32 no_beacons; 4663 __le32 mib_int_count; 4664 } __packed; 4665 4666 struct wmi_10x_pdev_stats { 4667 struct wmi_pdev_stats_base base; 4668 struct wmi_pdev_stats_tx tx; 4669 struct wmi_pdev_stats_rx rx; 4670 struct wmi_pdev_stats_peer peer; 4671 struct wmi_pdev_stats_extra extra; 4672 } __packed; 4673 4674 struct wmi_pdev_stats_mem { 4675 __le32 dram_free; 4676 __le32 iram_free; 4677 } __packed; 4678 4679 struct wmi_10_2_pdev_stats { 4680 struct wmi_pdev_stats_base base; 4681 struct wmi_pdev_stats_tx tx; 4682 __le32 mc_drop; 4683 struct wmi_pdev_stats_rx rx; 4684 __le32 pdev_rx_timeout; 4685 struct wmi_pdev_stats_mem mem; 4686 struct wmi_pdev_stats_peer peer; 4687 struct wmi_pdev_stats_extra extra; 4688 } __packed; 4689 4690 struct wmi_10_4_pdev_stats { 4691 struct wmi_pdev_stats_base base; 4692 struct wmi_10_4_pdev_stats_tx tx; 4693 struct wmi_pdev_stats_rx rx; 4694 __le32 rx_ovfl_errs; 4695 struct wmi_pdev_stats_mem mem; 4696 __le32 sram_free_size; 4697 struct wmi_pdev_stats_extra extra; 4698 } __packed; 4699 4700 /* 4701 * VDEV statistics 4702 */ 4703 4704 #define WMI_VDEV_STATS_FTM_COUNT_VALID BIT(31) 4705 #define WMI_VDEV_STATS_FTM_COUNT_LSB 0 4706 #define WMI_VDEV_STATS_FTM_COUNT_MASK 0x7fffffff 4707 4708 struct wmi_vdev_stats { 4709 __le32 vdev_id; 4710 } __packed; 4711 4712 struct wmi_vdev_stats_extd { 4713 __le32 vdev_id; 4714 __le32 ppdu_aggr_cnt; 4715 __le32 ppdu_noack; 4716 __le32 mpdu_queued; 4717 __le32 ppdu_nonaggr_cnt; 4718 __le32 mpdu_sw_requeued; 4719 __le32 mpdu_suc_retry; 4720 __le32 mpdu_suc_multitry; 4721 __le32 mpdu_fail_retry; 4722 __le32 tx_ftm_suc; 4723 __le32 tx_ftm_suc_retry; 4724 __le32 tx_ftm_fail; 4725 __le32 rx_ftmr_cnt; 4726 __le32 rx_ftmr_dup_cnt; 4727 __le32 rx_iftmr_cnt; 4728 __le32 rx_iftmr_dup_cnt; 4729 __le32 reserved[6]; 4730 } __packed; 4731 4732 /* 4733 * peer statistics. 4734 * TODO: add more stats 4735 */ 4736 struct wmi_peer_stats { 4737 struct wmi_mac_addr peer_macaddr; 4738 __le32 peer_rssi; 4739 __le32 peer_tx_rate; 4740 } __packed; 4741 4742 struct wmi_10x_peer_stats { 4743 struct wmi_peer_stats old; 4744 __le32 peer_rx_rate; 4745 } __packed; 4746 4747 struct wmi_10_2_peer_stats { 4748 struct wmi_peer_stats old; 4749 __le32 peer_rx_rate; 4750 __le32 current_per; 4751 __le32 retries; 4752 __le32 tx_rate_count; 4753 __le32 max_4ms_frame_len; 4754 __le32 total_sub_frames; 4755 __le32 tx_bytes; 4756 __le32 num_pkt_loss_overflow[4]; 4757 __le32 num_pkt_loss_excess_retry[4]; 4758 } __packed; 4759 4760 struct wmi_10_2_4_peer_stats { 4761 struct wmi_10_2_peer_stats common; 4762 __le32 peer_rssi_changed; 4763 } __packed; 4764 4765 struct wmi_10_2_4_ext_peer_stats { 4766 struct wmi_10_2_peer_stats common; 4767 __le32 peer_rssi_changed; 4768 __le32 rx_duration; 4769 } __packed; 4770 4771 struct wmi_10_4_peer_stats { 4772 struct wmi_mac_addr peer_macaddr; 4773 __le32 peer_rssi; 4774 __le32 peer_rssi_seq_num; 4775 __le32 peer_tx_rate; 4776 __le32 peer_rx_rate; 4777 __le32 current_per; 4778 __le32 retries; 4779 __le32 tx_rate_count; 4780 __le32 max_4ms_frame_len; 4781 __le32 total_sub_frames; 4782 __le32 tx_bytes; 4783 __le32 num_pkt_loss_overflow[4]; 4784 __le32 num_pkt_loss_excess_retry[4]; 4785 __le32 peer_rssi_changed; 4786 } __packed; 4787 4788 struct wmi_10_4_peer_extd_stats { 4789 struct wmi_mac_addr peer_macaddr; 4790 __le32 inactive_time; 4791 __le32 peer_chain_rssi; 4792 __le32 rx_duration; 4793 __le32 reserved[10]; 4794 } __packed; 4795 4796 struct wmi_10_4_bss_bcn_stats { 4797 __le32 vdev_id; 4798 __le32 bss_bcns_dropped; 4799 __le32 bss_bcn_delivered; 4800 } __packed; 4801 4802 struct wmi_10_4_bss_bcn_filter_stats { 4803 __le32 bcns_dropped; 4804 __le32 bcns_delivered; 4805 __le32 active_filters; 4806 struct wmi_10_4_bss_bcn_stats bss_stats; 4807 } __packed; 4808 4809 struct wmi_10_2_pdev_ext_stats { 4810 __le32 rx_rssi_comb; 4811 __le32 rx_rssi[4]; 4812 __le32 rx_mcs[10]; 4813 __le32 tx_mcs[10]; 4814 __le32 ack_rssi; 4815 } __packed; 4816 4817 struct wmi_vdev_create_cmd { 4818 __le32 vdev_id; 4819 __le32 vdev_type; 4820 __le32 vdev_subtype; 4821 struct wmi_mac_addr vdev_macaddr; 4822 } __packed; 4823 4824 enum wmi_vdev_type { 4825 WMI_VDEV_TYPE_AP = 1, 4826 WMI_VDEV_TYPE_STA = 2, 4827 WMI_VDEV_TYPE_IBSS = 3, 4828 WMI_VDEV_TYPE_MONITOR = 4, 4829 }; 4830 4831 enum wmi_vdev_subtype { 4832 WMI_VDEV_SUBTYPE_NONE, 4833 WMI_VDEV_SUBTYPE_P2P_DEVICE, 4834 WMI_VDEV_SUBTYPE_P2P_CLIENT, 4835 WMI_VDEV_SUBTYPE_P2P_GO, 4836 WMI_VDEV_SUBTYPE_PROXY_STA, 4837 WMI_VDEV_SUBTYPE_MESH_11S, 4838 WMI_VDEV_SUBTYPE_MESH_NON_11S, 4839 }; 4840 4841 enum wmi_vdev_subtype_legacy { 4842 WMI_VDEV_SUBTYPE_LEGACY_NONE = 0, 4843 WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1, 4844 WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2, 4845 WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3, 4846 WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4, 4847 }; 4848 4849 enum wmi_vdev_subtype_10_2_4 { 4850 WMI_VDEV_SUBTYPE_10_2_4_NONE = 0, 4851 WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1, 4852 WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2, 4853 WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3, 4854 WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4, 4855 WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5, 4856 }; 4857 4858 enum wmi_vdev_subtype_10_4 { 4859 WMI_VDEV_SUBTYPE_10_4_NONE = 0, 4860 WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1, 4861 WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2, 4862 WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3, 4863 WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4, 4864 WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5, 4865 WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6, 4866 }; 4867 4868 /* values for vdev_subtype */ 4869 4870 /* values for vdev_start_request flags */ 4871 /* 4872 * Indicates that AP VDEV uses hidden ssid. only valid for 4873 * AP/GO 4874 */ 4875 #define WMI_VDEV_START_HIDDEN_SSID (1 << 0) 4876 /* 4877 * Indicates if robust management frame/management frame 4878 * protection is enabled. For GO/AP vdevs, it indicates that 4879 * it may support station/client associations with RMF enabled. 4880 * For STA/client vdevs, it indicates that sta will 4881 * associate with AP with RMF enabled. 4882 */ 4883 #define WMI_VDEV_START_PMF_ENABLED (1 << 1) 4884 4885 struct wmi_p2p_noa_descriptor { 4886 __le32 type_count; /* 255: continuous schedule, 0: reserved */ 4887 __le32 duration; /* Absent period duration in micro seconds */ 4888 __le32 interval; /* Absent period interval in micro seconds */ 4889 __le32 start_time; /* 32 bit tsf time when in starts */ 4890 } __packed; 4891 4892 struct wmi_vdev_start_request_cmd { 4893 /* WMI channel */ 4894 struct wmi_channel chan; 4895 /* unique id identifying the VDEV, generated by the caller */ 4896 __le32 vdev_id; 4897 /* requestor id identifying the caller module */ 4898 __le32 requestor_id; 4899 /* beacon interval from received beacon */ 4900 __le32 beacon_interval; 4901 /* DTIM Period from the received beacon */ 4902 __le32 dtim_period; 4903 /* Flags */ 4904 __le32 flags; 4905 /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ 4906 struct wmi_ssid ssid; 4907 /* beacon/probe response xmit rate. Applicable for SoftAP. */ 4908 __le32 bcn_tx_rate; 4909 /* beacon/probe response xmit power. Applicable for SoftAP. */ 4910 __le32 bcn_tx_power; 4911 /* number of p2p NOA descriptor(s) from scan entry */ 4912 __le32 num_noa_descriptors; 4913 /* 4914 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID. 4915 * During CAC, Our HW shouldn't ack ditected frames 4916 */ 4917 __le32 disable_hw_ack; 4918 /* actual p2p NOA descriptor from scan entry */ 4919 struct wmi_p2p_noa_descriptor noa_descriptors[2]; 4920 } __packed; 4921 4922 struct wmi_vdev_restart_request_cmd { 4923 struct wmi_vdev_start_request_cmd vdev_start_request_cmd; 4924 } __packed; 4925 4926 struct wmi_vdev_start_request_arg { 4927 u32 vdev_id; 4928 struct wmi_channel_arg channel; 4929 u32 bcn_intval; 4930 u32 dtim_period; 4931 u8 *ssid; 4932 u32 ssid_len; 4933 u32 bcn_tx_rate; 4934 u32 bcn_tx_power; 4935 bool disable_hw_ack; 4936 bool hidden_ssid; 4937 bool pmf_enabled; 4938 }; 4939 4940 struct wmi_vdev_delete_cmd { 4941 /* unique id identifying the VDEV, generated by the caller */ 4942 __le32 vdev_id; 4943 } __packed; 4944 4945 struct wmi_vdev_up_cmd { 4946 __le32 vdev_id; 4947 __le32 vdev_assoc_id; 4948 struct wmi_mac_addr vdev_bssid; 4949 } __packed; 4950 4951 struct wmi_vdev_stop_cmd { 4952 __le32 vdev_id; 4953 } __packed; 4954 4955 struct wmi_vdev_down_cmd { 4956 __le32 vdev_id; 4957 } __packed; 4958 4959 struct wmi_vdev_standby_response_cmd { 4960 /* unique id identifying the VDEV, generated by the caller */ 4961 __le32 vdev_id; 4962 } __packed; 4963 4964 struct wmi_vdev_resume_response_cmd { 4965 /* unique id identifying the VDEV, generated by the caller */ 4966 __le32 vdev_id; 4967 } __packed; 4968 4969 struct wmi_vdev_set_param_cmd { 4970 __le32 vdev_id; 4971 __le32 param_id; 4972 __le32 param_value; 4973 } __packed; 4974 4975 #define WMI_MAX_KEY_INDEX 3 4976 #define WMI_MAX_KEY_LEN 32 4977 4978 #define WMI_KEY_PAIRWISE 0x00 4979 #define WMI_KEY_GROUP 0x01 4980 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */ 4981 4982 struct wmi_key_seq_counter { 4983 __le32 key_seq_counter_l; 4984 __le32 key_seq_counter_h; 4985 } __packed; 4986 4987 enum wmi_cipher_suites { 4988 WMI_CIPHER_NONE, 4989 WMI_CIPHER_WEP, 4990 WMI_CIPHER_TKIP, 4991 WMI_CIPHER_AES_OCB, 4992 WMI_CIPHER_AES_CCM, 4993 WMI_CIPHER_WAPI, 4994 WMI_CIPHER_CKIP, 4995 WMI_CIPHER_AES_CMAC, 4996 WMI_CIPHER_AES_GCM, 4997 }; 4998 4999 enum wmi_tlv_cipher_suites { 5000 WMI_TLV_CIPHER_NONE, 5001 WMI_TLV_CIPHER_WEP, 5002 WMI_TLV_CIPHER_TKIP, 5003 WMI_TLV_CIPHER_AES_OCB, 5004 WMI_TLV_CIPHER_AES_CCM, 5005 WMI_TLV_CIPHER_WAPI, 5006 WMI_TLV_CIPHER_CKIP, 5007 WMI_TLV_CIPHER_AES_CMAC, 5008 WMI_TLV_CIPHER_ANY, 5009 WMI_TLV_CIPHER_AES_GCM, 5010 }; 5011 5012 struct wmi_vdev_install_key_cmd { 5013 __le32 vdev_id; 5014 struct wmi_mac_addr peer_macaddr; 5015 __le32 key_idx; 5016 __le32 key_flags; 5017 __le32 key_cipher; /* %WMI_CIPHER_ */ 5018 struct wmi_key_seq_counter key_rsc_counter; 5019 struct wmi_key_seq_counter key_global_rsc_counter; 5020 struct wmi_key_seq_counter key_tsc_counter; 5021 u8 wpi_key_rsc_counter[16]; 5022 u8 wpi_key_tsc_counter[16]; 5023 __le32 key_len; 5024 __le32 key_txmic_len; 5025 __le32 key_rxmic_len; 5026 5027 /* contains key followed by tx mic followed by rx mic */ 5028 u8 key_data[0]; 5029 } __packed; 5030 5031 struct wmi_vdev_install_key_arg { 5032 u32 vdev_id; 5033 const u8 *macaddr; 5034 u32 key_idx; 5035 u32 key_flags; 5036 u32 key_cipher; 5037 u32 key_len; 5038 u32 key_txmic_len; 5039 u32 key_rxmic_len; 5040 const void *key_data; 5041 }; 5042 5043 /* 5044 * vdev fixed rate format: 5045 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_ 5046 * - nss - b5:b4 - ss number (0 mean 1ss) 5047 * - rate_mcs - b3:b0 - as below 5048 * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps, 5049 * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s) 5050 * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps, 5051 * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps 5052 * HT/VHT: MCS index 5053 */ 5054 5055 /* Preamble types to be used with VDEV fixed rate configuration */ 5056 enum wmi_rate_preamble { 5057 WMI_RATE_PREAMBLE_OFDM, 5058 WMI_RATE_PREAMBLE_CCK, 5059 WMI_RATE_PREAMBLE_HT, 5060 WMI_RATE_PREAMBLE_VHT, 5061 }; 5062 5063 #define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3)) 5064 #define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3) 5065 #define ATH10K_HW_MCS_RATE(rate) ((rate) & 0xf) 5066 #define ATH10K_HW_LEGACY_RATE(rate) ((rate) & 0x3f) 5067 #define ATH10K_HW_BW(flags) (((flags) >> 3) & 0x3) 5068 #define ATH10K_HW_GI(flags) (((flags) >> 5) & 0x1) 5069 #define ATH10K_HW_RATECODE(rate, nss, preamble) \ 5070 (((preamble) << 6) | ((nss) << 4) | (rate)) 5071 #define ATH10K_HW_AMPDU(flags) ((flags) & 0x1) 5072 #define ATH10K_HW_BA_FAIL(flags) (((flags) >> 1) & 0x3) 5073 #define ATH10K_FW_SKIPPED_RATE_CTRL(flags) (((flags) >> 6) & 0x1) 5074 5075 #define ATH10K_VHT_MCS_NUM 10 5076 #define ATH10K_BW_NUM 6 5077 #define ATH10K_NSS_NUM 4 5078 #define ATH10K_LEGACY_NUM 12 5079 #define ATH10K_GI_NUM 2 5080 #define ATH10K_HT_MCS_NUM 32 5081 #define ATH10K_RATE_TABLE_NUM 320 5082 #define ATH10K_RATE_INFO_FLAGS_SGI_BIT 2 5083 5084 /* Value to disable fixed rate setting */ 5085 #define WMI_FIXED_RATE_NONE (0xff) 5086 5087 struct wmi_peer_param_map { 5088 u32 smps_state; 5089 u32 ampdu; 5090 u32 authorize; 5091 u32 chan_width; 5092 u32 nss; 5093 u32 use_4addr; 5094 u32 membership; 5095 u32 use_fixed_power; 5096 u32 user_pos; 5097 u32 crit_proto_hint_enabled; 5098 u32 tx_fail_cnt_thr; 5099 u32 set_hw_retry_cts2s; 5100 u32 ibss_atim_win_len; 5101 u32 debug; 5102 u32 phymode; 5103 u32 dummy_var; 5104 }; 5105 5106 struct wmi_vdev_param_map { 5107 u32 rts_threshold; 5108 u32 fragmentation_threshold; 5109 u32 beacon_interval; 5110 u32 listen_interval; 5111 u32 multicast_rate; 5112 u32 mgmt_tx_rate; 5113 u32 slot_time; 5114 u32 preamble; 5115 u32 swba_time; 5116 u32 wmi_vdev_stats_update_period; 5117 u32 wmi_vdev_pwrsave_ageout_time; 5118 u32 wmi_vdev_host_swba_interval; 5119 u32 dtim_period; 5120 u32 wmi_vdev_oc_scheduler_air_time_limit; 5121 u32 wds; 5122 u32 atim_window; 5123 u32 bmiss_count_max; 5124 u32 bmiss_first_bcnt; 5125 u32 bmiss_final_bcnt; 5126 u32 feature_wmm; 5127 u32 chwidth; 5128 u32 chextoffset; 5129 u32 disable_htprotection; 5130 u32 sta_quickkickout; 5131 u32 mgmt_rate; 5132 u32 protection_mode; 5133 u32 fixed_rate; 5134 u32 sgi; 5135 u32 ldpc; 5136 u32 tx_stbc; 5137 u32 rx_stbc; 5138 u32 intra_bss_fwd; 5139 u32 def_keyid; 5140 u32 nss; 5141 u32 bcast_data_rate; 5142 u32 mcast_data_rate; 5143 u32 mcast_indicate; 5144 u32 dhcp_indicate; 5145 u32 unknown_dest_indicate; 5146 u32 ap_keepalive_min_idle_inactive_time_secs; 5147 u32 ap_keepalive_max_idle_inactive_time_secs; 5148 u32 ap_keepalive_max_unresponsive_time_secs; 5149 u32 ap_enable_nawds; 5150 u32 mcast2ucast_set; 5151 u32 enable_rtscts; 5152 u32 txbf; 5153 u32 packet_powersave; 5154 u32 drop_unencry; 5155 u32 tx_encap_type; 5156 u32 ap_detect_out_of_sync_sleeping_sta_time_secs; 5157 u32 rc_num_retries; 5158 u32 cabq_maxdur; 5159 u32 mfptest_set; 5160 u32 rts_fixed_rate; 5161 u32 vht_sgimask; 5162 u32 vht80_ratemask; 5163 u32 early_rx_adjust_enable; 5164 u32 early_rx_tgt_bmiss_num; 5165 u32 early_rx_bmiss_sample_cycle; 5166 u32 early_rx_slop_step; 5167 u32 early_rx_init_slop; 5168 u32 early_rx_adjust_pause; 5169 u32 proxy_sta; 5170 u32 meru_vc; 5171 u32 rx_decap_type; 5172 u32 bw_nss_ratemask; 5173 u32 inc_tsf; 5174 u32 dec_tsf; 5175 u32 disable_4addr_src_lrn; 5176 u32 rtt_responder_role; 5177 }; 5178 5179 #define WMI_VDEV_PARAM_UNSUPPORTED 0 5180 5181 /* the definition of different VDEV parameters */ 5182 enum wmi_vdev_param { 5183 /* RTS Threshold */ 5184 WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5185 /* Fragmentation threshold */ 5186 WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5187 /* beacon interval in TUs */ 5188 WMI_VDEV_PARAM_BEACON_INTERVAL, 5189 /* Listen interval in TUs */ 5190 WMI_VDEV_PARAM_LISTEN_INTERVAL, 5191 /* multicast rate in Mbps */ 5192 WMI_VDEV_PARAM_MULTICAST_RATE, 5193 /* management frame rate in Mbps */ 5194 WMI_VDEV_PARAM_MGMT_TX_RATE, 5195 /* slot time (long vs short) */ 5196 WMI_VDEV_PARAM_SLOT_TIME, 5197 /* preamble (long vs short) */ 5198 WMI_VDEV_PARAM_PREAMBLE, 5199 /* SWBA time (time before tbtt in msec) */ 5200 WMI_VDEV_PARAM_SWBA_TIME, 5201 /* time period for updating VDEV stats */ 5202 WMI_VDEV_STATS_UPDATE_PERIOD, 5203 /* age out time in msec for frames queued for station in power save */ 5204 WMI_VDEV_PWRSAVE_AGEOUT_TIME, 5205 /* 5206 * Host SWBA interval (time in msec before tbtt for SWBA event 5207 * generation). 5208 */ 5209 WMI_VDEV_HOST_SWBA_INTERVAL, 5210 /* DTIM period (specified in units of num beacon intervals) */ 5211 WMI_VDEV_PARAM_DTIM_PERIOD, 5212 /* 5213 * scheduler air time limit for this VDEV. used by off chan 5214 * scheduler. 5215 */ 5216 WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5217 /* enable/dsiable WDS for this VDEV */ 5218 WMI_VDEV_PARAM_WDS, 5219 /* ATIM Window */ 5220 WMI_VDEV_PARAM_ATIM_WINDOW, 5221 /* BMISS max */ 5222 WMI_VDEV_PARAM_BMISS_COUNT_MAX, 5223 /* BMISS first time */ 5224 WMI_VDEV_PARAM_BMISS_FIRST_BCNT, 5225 /* BMISS final time */ 5226 WMI_VDEV_PARAM_BMISS_FINAL_BCNT, 5227 /* WMM enables/disabled */ 5228 WMI_VDEV_PARAM_FEATURE_WMM, 5229 /* Channel width */ 5230 WMI_VDEV_PARAM_CHWIDTH, 5231 /* Channel Offset */ 5232 WMI_VDEV_PARAM_CHEXTOFFSET, 5233 /* Disable HT Protection */ 5234 WMI_VDEV_PARAM_DISABLE_HTPROTECTION, 5235 /* Quick STA Kickout */ 5236 WMI_VDEV_PARAM_STA_QUICKKICKOUT, 5237 /* Rate to be used with Management frames */ 5238 WMI_VDEV_PARAM_MGMT_RATE, 5239 /* Protection Mode */ 5240 WMI_VDEV_PARAM_PROTECTION_MODE, 5241 /* Fixed rate setting */ 5242 WMI_VDEV_PARAM_FIXED_RATE, 5243 /* Short GI Enable/Disable */ 5244 WMI_VDEV_PARAM_SGI, 5245 /* Enable LDPC */ 5246 WMI_VDEV_PARAM_LDPC, 5247 /* Enable Tx STBC */ 5248 WMI_VDEV_PARAM_TX_STBC, 5249 /* Enable Rx STBC */ 5250 WMI_VDEV_PARAM_RX_STBC, 5251 /* Intra BSS forwarding */ 5252 WMI_VDEV_PARAM_INTRA_BSS_FWD, 5253 /* Setting Default xmit key for Vdev */ 5254 WMI_VDEV_PARAM_DEF_KEYID, 5255 /* NSS width */ 5256 WMI_VDEV_PARAM_NSS, 5257 /* Set the custom rate for the broadcast data frames */ 5258 WMI_VDEV_PARAM_BCAST_DATA_RATE, 5259 /* Set the custom rate (rate-code) for multicast data frames */ 5260 WMI_VDEV_PARAM_MCAST_DATA_RATE, 5261 /* Tx multicast packet indicate Enable/Disable */ 5262 WMI_VDEV_PARAM_MCAST_INDICATE, 5263 /* Tx DHCP packet indicate Enable/Disable */ 5264 WMI_VDEV_PARAM_DHCP_INDICATE, 5265 /* Enable host inspection of Tx unicast packet to unknown destination */ 5266 WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5267 5268 /* The minimum amount of time AP begins to consider STA inactive */ 5269 WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5270 5271 /* 5272 * An associated STA is considered inactive when there is no recent 5273 * TX/RX activity and no downlink frames are buffered for it. Once a 5274 * STA exceeds the maximum idle inactive time, the AP will send an 5275 * 802.11 data-null as a keep alive to verify the STA is still 5276 * associated. If the STA does ACK the data-null, or if the data-null 5277 * is buffered and the STA does not retrieve it, the STA will be 5278 * considered unresponsive 5279 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 5280 */ 5281 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5282 5283 /* 5284 * An associated STA is considered unresponsive if there is no recent 5285 * TX/RX activity and downlink frames are buffered for it. Once a STA 5286 * exceeds the maximum unresponsive time, the AP will send a 5287 * WMI_STA_KICKOUT event to the host so the STA can be deleted. 5288 */ 5289 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5290 5291 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 5292 WMI_VDEV_PARAM_AP_ENABLE_NAWDS, 5293 /* Enable/Disable RTS-CTS */ 5294 WMI_VDEV_PARAM_ENABLE_RTSCTS, 5295 /* Enable TXBFee/er */ 5296 WMI_VDEV_PARAM_TXBF, 5297 5298 /* Set packet power save */ 5299 WMI_VDEV_PARAM_PACKET_POWERSAVE, 5300 5301 /* 5302 * Drops un-encrypted packets if eceived in an encrypted connection 5303 * otherwise forwards to host. 5304 */ 5305 WMI_VDEV_PARAM_DROP_UNENCRY, 5306 5307 /* 5308 * Set the encapsulation type for frames. 5309 */ 5310 WMI_VDEV_PARAM_TX_ENCAP_TYPE, 5311 }; 5312 5313 /* the definition of different VDEV parameters */ 5314 enum wmi_10x_vdev_param { 5315 /* RTS Threshold */ 5316 WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5317 /* Fragmentation threshold */ 5318 WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5319 /* beacon interval in TUs */ 5320 WMI_10X_VDEV_PARAM_BEACON_INTERVAL, 5321 /* Listen interval in TUs */ 5322 WMI_10X_VDEV_PARAM_LISTEN_INTERVAL, 5323 /* multicast rate in Mbps */ 5324 WMI_10X_VDEV_PARAM_MULTICAST_RATE, 5325 /* management frame rate in Mbps */ 5326 WMI_10X_VDEV_PARAM_MGMT_TX_RATE, 5327 /* slot time (long vs short) */ 5328 WMI_10X_VDEV_PARAM_SLOT_TIME, 5329 /* preamble (long vs short) */ 5330 WMI_10X_VDEV_PARAM_PREAMBLE, 5331 /* SWBA time (time before tbtt in msec) */ 5332 WMI_10X_VDEV_PARAM_SWBA_TIME, 5333 /* time period for updating VDEV stats */ 5334 WMI_10X_VDEV_STATS_UPDATE_PERIOD, 5335 /* age out time in msec for frames queued for station in power save */ 5336 WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME, 5337 /* 5338 * Host SWBA interval (time in msec before tbtt for SWBA event 5339 * generation). 5340 */ 5341 WMI_10X_VDEV_HOST_SWBA_INTERVAL, 5342 /* DTIM period (specified in units of num beacon intervals) */ 5343 WMI_10X_VDEV_PARAM_DTIM_PERIOD, 5344 /* 5345 * scheduler air time limit for this VDEV. used by off chan 5346 * scheduler. 5347 */ 5348 WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5349 /* enable/dsiable WDS for this VDEV */ 5350 WMI_10X_VDEV_PARAM_WDS, 5351 /* ATIM Window */ 5352 WMI_10X_VDEV_PARAM_ATIM_WINDOW, 5353 /* BMISS max */ 5354 WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX, 5355 /* WMM enables/disabled */ 5356 WMI_10X_VDEV_PARAM_FEATURE_WMM, 5357 /* Channel width */ 5358 WMI_10X_VDEV_PARAM_CHWIDTH, 5359 /* Channel Offset */ 5360 WMI_10X_VDEV_PARAM_CHEXTOFFSET, 5361 /* Disable HT Protection */ 5362 WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION, 5363 /* Quick STA Kickout */ 5364 WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT, 5365 /* Rate to be used with Management frames */ 5366 WMI_10X_VDEV_PARAM_MGMT_RATE, 5367 /* Protection Mode */ 5368 WMI_10X_VDEV_PARAM_PROTECTION_MODE, 5369 /* Fixed rate setting */ 5370 WMI_10X_VDEV_PARAM_FIXED_RATE, 5371 /* Short GI Enable/Disable */ 5372 WMI_10X_VDEV_PARAM_SGI, 5373 /* Enable LDPC */ 5374 WMI_10X_VDEV_PARAM_LDPC, 5375 /* Enable Tx STBC */ 5376 WMI_10X_VDEV_PARAM_TX_STBC, 5377 /* Enable Rx STBC */ 5378 WMI_10X_VDEV_PARAM_RX_STBC, 5379 /* Intra BSS forwarding */ 5380 WMI_10X_VDEV_PARAM_INTRA_BSS_FWD, 5381 /* Setting Default xmit key for Vdev */ 5382 WMI_10X_VDEV_PARAM_DEF_KEYID, 5383 /* NSS width */ 5384 WMI_10X_VDEV_PARAM_NSS, 5385 /* Set the custom rate for the broadcast data frames */ 5386 WMI_10X_VDEV_PARAM_BCAST_DATA_RATE, 5387 /* Set the custom rate (rate-code) for multicast data frames */ 5388 WMI_10X_VDEV_PARAM_MCAST_DATA_RATE, 5389 /* Tx multicast packet indicate Enable/Disable */ 5390 WMI_10X_VDEV_PARAM_MCAST_INDICATE, 5391 /* Tx DHCP packet indicate Enable/Disable */ 5392 WMI_10X_VDEV_PARAM_DHCP_INDICATE, 5393 /* Enable host inspection of Tx unicast packet to unknown destination */ 5394 WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5395 5396 /* The minimum amount of time AP begins to consider STA inactive */ 5397 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5398 5399 /* 5400 * An associated STA is considered inactive when there is no recent 5401 * TX/RX activity and no downlink frames are buffered for it. Once a 5402 * STA exceeds the maximum idle inactive time, the AP will send an 5403 * 802.11 data-null as a keep alive to verify the STA is still 5404 * associated. If the STA does ACK the data-null, or if the data-null 5405 * is buffered and the STA does not retrieve it, the STA will be 5406 * considered unresponsive 5407 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS). 5408 */ 5409 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5410 5411 /* 5412 * An associated STA is considered unresponsive if there is no recent 5413 * TX/RX activity and downlink frames are buffered for it. Once a STA 5414 * exceeds the maximum unresponsive time, the AP will send a 5415 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. 5416 */ 5417 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5418 5419 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */ 5420 WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS, 5421 5422 WMI_10X_VDEV_PARAM_MCAST2UCAST_SET, 5423 /* Enable/Disable RTS-CTS */ 5424 WMI_10X_VDEV_PARAM_ENABLE_RTSCTS, 5425 5426 WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 5427 5428 /* following are available as of firmware 10.2 */ 5429 WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE, 5430 WMI_10X_VDEV_PARAM_CABQ_MAXDUR, 5431 WMI_10X_VDEV_PARAM_MFPTEST_SET, 5432 WMI_10X_VDEV_PARAM_RTS_FIXED_RATE, 5433 WMI_10X_VDEV_PARAM_VHT_SGIMASK, 5434 WMI_10X_VDEV_PARAM_VHT80_RATEMASK, 5435 WMI_10X_VDEV_PARAM_TSF_INCREMENT, 5436 }; 5437 5438 enum wmi_10_4_vdev_param { 5439 WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1, 5440 WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD, 5441 WMI_10_4_VDEV_PARAM_BEACON_INTERVAL, 5442 WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL, 5443 WMI_10_4_VDEV_PARAM_MULTICAST_RATE, 5444 WMI_10_4_VDEV_PARAM_MGMT_TX_RATE, 5445 WMI_10_4_VDEV_PARAM_SLOT_TIME, 5446 WMI_10_4_VDEV_PARAM_PREAMBLE, 5447 WMI_10_4_VDEV_PARAM_SWBA_TIME, 5448 WMI_10_4_VDEV_STATS_UPDATE_PERIOD, 5449 WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME, 5450 WMI_10_4_VDEV_HOST_SWBA_INTERVAL, 5451 WMI_10_4_VDEV_PARAM_DTIM_PERIOD, 5452 WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT, 5453 WMI_10_4_VDEV_PARAM_WDS, 5454 WMI_10_4_VDEV_PARAM_ATIM_WINDOW, 5455 WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX, 5456 WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT, 5457 WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT, 5458 WMI_10_4_VDEV_PARAM_FEATURE_WMM, 5459 WMI_10_4_VDEV_PARAM_CHWIDTH, 5460 WMI_10_4_VDEV_PARAM_CHEXTOFFSET, 5461 WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION, 5462 WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT, 5463 WMI_10_4_VDEV_PARAM_MGMT_RATE, 5464 WMI_10_4_VDEV_PARAM_PROTECTION_MODE, 5465 WMI_10_4_VDEV_PARAM_FIXED_RATE, 5466 WMI_10_4_VDEV_PARAM_SGI, 5467 WMI_10_4_VDEV_PARAM_LDPC, 5468 WMI_10_4_VDEV_PARAM_TX_STBC, 5469 WMI_10_4_VDEV_PARAM_RX_STBC, 5470 WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD, 5471 WMI_10_4_VDEV_PARAM_DEF_KEYID, 5472 WMI_10_4_VDEV_PARAM_NSS, 5473 WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE, 5474 WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE, 5475 WMI_10_4_VDEV_PARAM_MCAST_INDICATE, 5476 WMI_10_4_VDEV_PARAM_DHCP_INDICATE, 5477 WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE, 5478 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS, 5479 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS, 5480 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS, 5481 WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS, 5482 WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET, 5483 WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS, 5484 WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES, 5485 WMI_10_4_VDEV_PARAM_TXBF, 5486 WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE, 5487 WMI_10_4_VDEV_PARAM_DROP_UNENCRY, 5488 WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE, 5489 WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS, 5490 WMI_10_4_VDEV_PARAM_CABQ_MAXDUR, 5491 WMI_10_4_VDEV_PARAM_MFPTEST_SET, 5492 WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE, 5493 WMI_10_4_VDEV_PARAM_VHT_SGIMASK, 5494 WMI_10_4_VDEV_PARAM_VHT80_RATEMASK, 5495 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE, 5496 WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM, 5497 WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE, 5498 WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP, 5499 WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP, 5500 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE, 5501 WMI_10_4_VDEV_PARAM_PROXY_STA, 5502 WMI_10_4_VDEV_PARAM_MERU_VC, 5503 WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE, 5504 WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK, 5505 WMI_10_4_VDEV_PARAM_SENSOR_AP, 5506 WMI_10_4_VDEV_PARAM_BEACON_RATE, 5507 WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS, 5508 WMI_10_4_VDEV_PARAM_STA_KICKOUT, 5509 WMI_10_4_VDEV_PARAM_CAPABILITIES, 5510 WMI_10_4_VDEV_PARAM_TSF_INCREMENT, 5511 WMI_10_4_VDEV_PARAM_RX_FILTER, 5512 WMI_10_4_VDEV_PARAM_MGMT_TX_POWER, 5513 WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY, 5514 WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS, 5515 WMI_10_4_VDEV_PARAM_TSF_DECREMENT, 5516 WMI_10_4_VDEV_PARAM_SELFGEN_FIXED_RATE, 5517 WMI_10_4_VDEV_PARAM_AMPDU_SUBFRAME_SIZE_PER_AC, 5518 WMI_10_4_VDEV_PARAM_NSS_VHT160, 5519 WMI_10_4_VDEV_PARAM_NSS_VHT80_80, 5520 WMI_10_4_VDEV_PARAM_AMSDU_SUBFRAME_SIZE_PER_AC, 5521 WMI_10_4_VDEV_PARAM_DISABLE_CABQ, 5522 WMI_10_4_VDEV_PARAM_SIFS_TRIGGER_RATE, 5523 WMI_10_4_VDEV_PARAM_TX_POWER, 5524 WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE, 5525 WMI_10_4_VDEV_PARAM_DISABLE_4_ADDR_SRC_LRN, 5526 }; 5527 5528 #define WMI_VDEV_DISABLE_4_ADDR_SRC_LRN 1 5529 5530 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0) 5531 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1) 5532 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2) 5533 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3) 5534 5535 #define WMI_TXBF_STS_CAP_OFFSET_LSB 4 5536 #define WMI_TXBF_STS_CAP_OFFSET_MASK 0x70 5537 #define WMI_TXBF_CONF_IMPLICIT_BF BIT(7) 5538 #define WMI_BF_SOUND_DIM_OFFSET_LSB 8 5539 #define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00 5540 5541 /* slot time long */ 5542 #define WMI_VDEV_SLOT_TIME_LONG 0x1 5543 /* slot time short */ 5544 #define WMI_VDEV_SLOT_TIME_SHORT 0x2 5545 /* preablbe long */ 5546 #define WMI_VDEV_PREAMBLE_LONG 0x1 5547 /* preablbe short */ 5548 #define WMI_VDEV_PREAMBLE_SHORT 0x2 5549 5550 enum wmi_start_event_param { 5551 WMI_VDEV_RESP_START_EVENT = 0, 5552 WMI_VDEV_RESP_RESTART_EVENT, 5553 }; 5554 5555 struct wmi_vdev_start_response_event { 5556 __le32 vdev_id; 5557 __le32 req_id; 5558 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 5559 __le32 status; 5560 } __packed; 5561 5562 struct wmi_vdev_standby_req_event { 5563 /* unique id identifying the VDEV, generated by the caller */ 5564 __le32 vdev_id; 5565 } __packed; 5566 5567 struct wmi_vdev_resume_req_event { 5568 /* unique id identifying the VDEV, generated by the caller */ 5569 __le32 vdev_id; 5570 } __packed; 5571 5572 struct wmi_vdev_stopped_event { 5573 /* unique id identifying the VDEV, generated by the caller */ 5574 __le32 vdev_id; 5575 } __packed; 5576 5577 /* 5578 * common structure used for simple events 5579 * (stopped, resume_req, standby response) 5580 */ 5581 struct wmi_vdev_simple_event { 5582 /* unique id identifying the VDEV, generated by the caller */ 5583 __le32 vdev_id; 5584 } __packed; 5585 5586 /* VDEV start response status codes */ 5587 /* VDEV successfully started */ 5588 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 5589 5590 /* requested VDEV not found */ 5591 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1 5592 5593 /* unsupported VDEV combination */ 5594 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2 5595 5596 /* TODO: please add more comments if you have in-depth information */ 5597 struct wmi_vdev_spectral_conf_cmd { 5598 __le32 vdev_id; 5599 5600 /* number of fft samples to send (0 for infinite) */ 5601 __le32 scan_count; 5602 __le32 scan_period; 5603 __le32 scan_priority; 5604 5605 /* number of bins in the FFT: 2^(fft_size - bin_scale) */ 5606 __le32 scan_fft_size; 5607 __le32 scan_gc_ena; 5608 __le32 scan_restart_ena; 5609 __le32 scan_noise_floor_ref; 5610 __le32 scan_init_delay; 5611 __le32 scan_nb_tone_thr; 5612 __le32 scan_str_bin_thr; 5613 __le32 scan_wb_rpt_mode; 5614 __le32 scan_rssi_rpt_mode; 5615 __le32 scan_rssi_thr; 5616 __le32 scan_pwr_format; 5617 5618 /* rpt_mode: Format of FFT report to software for spectral scan 5619 * triggered FFTs: 5620 * 0: No FFT report (only spectral scan summary report) 5621 * 1: 2-dword summary of metrics for each completed FFT + spectral 5622 * scan summary report 5623 * 2: 2-dword summary of metrics for each completed FFT + 5624 * 1x- oversampled bins(in-band) per FFT + spectral scan summary 5625 * report 5626 * 3: 2-dword summary of metrics for each completed FFT + 5627 * 2x- oversampled bins (all) per FFT + spectral scan summary 5628 */ 5629 __le32 scan_rpt_mode; 5630 __le32 scan_bin_scale; 5631 __le32 scan_dbm_adj; 5632 __le32 scan_chn_mask; 5633 } __packed; 5634 5635 struct wmi_vdev_spectral_conf_arg { 5636 u32 vdev_id; 5637 u32 scan_count; 5638 u32 scan_period; 5639 u32 scan_priority; 5640 u32 scan_fft_size; 5641 u32 scan_gc_ena; 5642 u32 scan_restart_ena; 5643 u32 scan_noise_floor_ref; 5644 u32 scan_init_delay; 5645 u32 scan_nb_tone_thr; 5646 u32 scan_str_bin_thr; 5647 u32 scan_wb_rpt_mode; 5648 u32 scan_rssi_rpt_mode; 5649 u32 scan_rssi_thr; 5650 u32 scan_pwr_format; 5651 u32 scan_rpt_mode; 5652 u32 scan_bin_scale; 5653 u32 scan_dbm_adj; 5654 u32 scan_chn_mask; 5655 }; 5656 5657 #define WMI_SPECTRAL_ENABLE_DEFAULT 0 5658 #define WMI_SPECTRAL_COUNT_DEFAULT 0 5659 #define WMI_SPECTRAL_PERIOD_DEFAULT 35 5660 #define WMI_SPECTRAL_PRIORITY_DEFAULT 1 5661 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7 5662 #define WMI_SPECTRAL_GC_ENA_DEFAULT 1 5663 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0 5664 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96 5665 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80 5666 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12 5667 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8 5668 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0 5669 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0 5670 #define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0 5671 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0 5672 #define WMI_SPECTRAL_RPT_MODE_DEFAULT 2 5673 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1 5674 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1 5675 #define WMI_SPECTRAL_CHN_MASK_DEFAULT 1 5676 5677 struct wmi_vdev_spectral_enable_cmd { 5678 __le32 vdev_id; 5679 __le32 trigger_cmd; 5680 __le32 enable_cmd; 5681 } __packed; 5682 5683 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1 5684 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2 5685 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1 5686 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2 5687 5688 /* Beacon processing related command and event structures */ 5689 struct wmi_bcn_tx_hdr { 5690 __le32 vdev_id; 5691 __le32 tx_rate; 5692 __le32 tx_power; 5693 __le32 bcn_len; 5694 } __packed; 5695 5696 struct wmi_bcn_tx_cmd { 5697 struct wmi_bcn_tx_hdr hdr; 5698 u8 *bcn[0]; 5699 } __packed; 5700 5701 struct wmi_bcn_tx_arg { 5702 u32 vdev_id; 5703 u32 tx_rate; 5704 u32 tx_power; 5705 u32 bcn_len; 5706 const void *bcn; 5707 }; 5708 5709 enum wmi_bcn_tx_ref_flags { 5710 WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1, 5711 WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2, 5712 }; 5713 5714 /* TODO: It is unclear why "no antenna" works while any other seemingly valid 5715 * chainmask yields no beacons on the air at all. 5716 */ 5717 #define WMI_BCN_TX_REF_DEF_ANTENNA 0 5718 5719 struct wmi_bcn_tx_ref_cmd { 5720 __le32 vdev_id; 5721 __le32 data_len; 5722 /* physical address of the frame - dma pointer */ 5723 __le32 data_ptr; 5724 /* id for host to track */ 5725 __le32 msdu_id; 5726 /* frame ctrl to setup PPDU desc */ 5727 __le32 frame_control; 5728 /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */ 5729 __le32 flags; 5730 /* introduced in 10.2 */ 5731 __le32 antenna_mask; 5732 } __packed; 5733 5734 /* Beacon filter */ 5735 #define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */ 5736 #define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */ 5737 #define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */ 5738 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */ 5739 #define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */ 5740 5741 struct wmi_bcn_filter_rx_cmd { 5742 /* Filter ID */ 5743 __le32 bcn_filter_id; 5744 /* Filter type - wmi_bcn_filter */ 5745 __le32 bcn_filter; 5746 /* Buffer len */ 5747 __le32 bcn_filter_len; 5748 /* Filter info (threshold, BSSID, RSSI) */ 5749 u8 *bcn_filter_buf; 5750 } __packed; 5751 5752 /* Capabilities and IEs to be passed to firmware */ 5753 struct wmi_bcn_prb_info { 5754 /* Capabilities */ 5755 __le32 caps; 5756 /* ERP info */ 5757 __le32 erp; 5758 /* Advanced capabilities */ 5759 /* HT capabilities */ 5760 /* HT Info */ 5761 /* ibss_dfs */ 5762 /* wpa Info */ 5763 /* rsn Info */ 5764 /* rrm info */ 5765 /* ath_ext */ 5766 /* app IE */ 5767 } __packed; 5768 5769 struct wmi_bcn_tmpl_cmd { 5770 /* unique id identifying the VDEV, generated by the caller */ 5771 __le32 vdev_id; 5772 /* TIM IE offset from the beginning of the template. */ 5773 __le32 tim_ie_offset; 5774 /* beacon probe capabilities and IEs */ 5775 struct wmi_bcn_prb_info bcn_prb_info; 5776 /* beacon buffer length */ 5777 __le32 buf_len; 5778 /* variable length data */ 5779 u8 data[1]; 5780 } __packed; 5781 5782 struct wmi_prb_tmpl_cmd { 5783 /* unique id identifying the VDEV, generated by the caller */ 5784 __le32 vdev_id; 5785 /* beacon probe capabilities and IEs */ 5786 struct wmi_bcn_prb_info bcn_prb_info; 5787 /* beacon buffer length */ 5788 __le32 buf_len; 5789 /* Variable length data */ 5790 u8 data[1]; 5791 } __packed; 5792 5793 enum wmi_sta_ps_mode { 5794 /* enable power save for the given STA VDEV */ 5795 WMI_STA_PS_MODE_DISABLED = 0, 5796 /* disable power save for a given STA VDEV */ 5797 WMI_STA_PS_MODE_ENABLED = 1, 5798 }; 5799 5800 struct wmi_sta_powersave_mode_cmd { 5801 /* unique id identifying the VDEV, generated by the caller */ 5802 __le32 vdev_id; 5803 5804 /* 5805 * Power save mode 5806 * (see enum wmi_sta_ps_mode) 5807 */ 5808 __le32 sta_ps_mode; 5809 } __packed; 5810 5811 enum wmi_csa_offload_en { 5812 WMI_CSA_OFFLOAD_DISABLE = 0, 5813 WMI_CSA_OFFLOAD_ENABLE = 1, 5814 }; 5815 5816 struct wmi_csa_offload_enable_cmd { 5817 __le32 vdev_id; 5818 __le32 csa_offload_enable; 5819 } __packed; 5820 5821 struct wmi_csa_offload_chanswitch_cmd { 5822 __le32 vdev_id; 5823 struct wmi_channel chan; 5824 } __packed; 5825 5826 /* 5827 * This parameter controls the policy for retrieving frames from AP while the 5828 * STA is in sleep state. 5829 * 5830 * Only takes affect if the sta_ps_mode is enabled 5831 */ 5832 enum wmi_sta_ps_param_rx_wake_policy { 5833 /* 5834 * Wake up when ever there is an RX activity on the VDEV. In this mode 5835 * the Power save SM(state machine) will come out of sleep by either 5836 * sending null frame (or) a data frame (with PS==0) in response to TIM 5837 * bit set in the received beacon frame from AP. 5838 */ 5839 WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0, 5840 5841 /* 5842 * Here the power save state machine will not wakeup in response to TIM 5843 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD 5844 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all 5845 * access categories are delivery-enabled, the station will send a 5846 * UAPSD trigger frame, otherwise it will send a PS-Poll. 5847 */ 5848 WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1, 5849 }; 5850 5851 /* 5852 * Number of tx frames/beacon that cause the power save SM to wake up. 5853 * 5854 * Value 1 causes the SM to wake up for every TX. Value 0 has a special 5855 * meaning, It will cause the SM to never wake up. This is useful if you want 5856 * to keep the system to sleep all the time for some kind of test mode . host 5857 * can change this parameter any time. It will affect at the next tx frame. 5858 */ 5859 enum wmi_sta_ps_param_tx_wake_threshold { 5860 WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0, 5861 WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1, 5862 5863 /* 5864 * Values greater than one indicate that many TX attempts per beacon 5865 * interval before the STA will wake up 5866 */ 5867 }; 5868 5869 /* 5870 * The maximum number of PS-Poll frames the FW will send in response to 5871 * traffic advertised in TIM before waking up (by sending a null frame with PS 5872 * = 0). Value 0 has a special meaning: there is no maximum count and the FW 5873 * will send as many PS-Poll as are necessary to retrieve buffered BU. This 5874 * parameter is used when the RX wake policy is 5875 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake 5876 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE. 5877 */ 5878 enum wmi_sta_ps_param_pspoll_count { 5879 WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0, 5880 /* 5881 * Values greater than 0 indicate the maximum numer of PS-Poll frames 5882 * FW will send before waking up. 5883 */ 5884 5885 /* When u-APSD is enabled the firmware will be very reluctant to exit 5886 * STA PS. This could result in very poor Rx performance with STA doing 5887 * PS-Poll for each and every buffered frame. This value is a bit 5888 * arbitrary. 5889 */ 5890 WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3, 5891 }; 5892 5893 /* 5894 * This will include the delivery and trigger enabled state for every AC. 5895 * This is the negotiated state with AP. The host MLME needs to set this based 5896 * on AP capability and the state Set in the association request by the 5897 * station MLME.Lower 8 bits of the value specify the UAPSD configuration. 5898 */ 5899 #define WMI_UAPSD_AC_TYPE_DELI 0 5900 #define WMI_UAPSD_AC_TYPE_TRIG 1 5901 5902 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \ 5903 (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1)) 5904 5905 enum wmi_sta_ps_param_uapsd { 5906 WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 5907 WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 5908 WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 5909 WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 5910 WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 5911 WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 5912 WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 5913 WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 5914 }; 5915 5916 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX 5917 5918 struct wmi_sta_uapsd_auto_trig_param { 5919 __le32 wmm_ac; 5920 __le32 user_priority; 5921 __le32 service_interval; 5922 __le32 suspend_interval; 5923 __le32 delay_interval; 5924 }; 5925 5926 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param { 5927 __le32 vdev_id; 5928 struct wmi_mac_addr peer_macaddr; 5929 __le32 num_ac; 5930 }; 5931 5932 struct wmi_sta_uapsd_auto_trig_arg { 5933 u32 wmm_ac; 5934 u32 user_priority; 5935 u32 service_interval; 5936 u32 suspend_interval; 5937 u32 delay_interval; 5938 }; 5939 5940 enum wmi_sta_powersave_param { 5941 /* 5942 * Controls how frames are retrievd from AP while STA is sleeping 5943 * 5944 * (see enum wmi_sta_ps_param_rx_wake_policy) 5945 */ 5946 WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0, 5947 5948 /* 5949 * The STA will go active after this many TX 5950 * 5951 * (see enum wmi_sta_ps_param_tx_wake_threshold) 5952 */ 5953 WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1, 5954 5955 /* 5956 * Number of PS-Poll to send before STA wakes up 5957 * 5958 * (see enum wmi_sta_ps_param_pspoll_count) 5959 * 5960 */ 5961 WMI_STA_PS_PARAM_PSPOLL_COUNT = 2, 5962 5963 /* 5964 * TX/RX inactivity time in msec before going to sleep. 5965 * 5966 * The power save SM will monitor tx/rx activity on the VDEV, if no 5967 * activity for the specified msec of the parameter the Power save 5968 * SM will go to sleep. 5969 */ 5970 WMI_STA_PS_PARAM_INACTIVITY_TIME = 3, 5971 5972 /* 5973 * Set uapsd configuration. 5974 * 5975 * (see enum wmi_sta_ps_param_uapsd) 5976 */ 5977 WMI_STA_PS_PARAM_UAPSD = 4, 5978 }; 5979 5980 struct wmi_sta_powersave_param_cmd { 5981 __le32 vdev_id; 5982 __le32 param_id; /* %WMI_STA_PS_PARAM_ */ 5983 __le32 param_value; 5984 } __packed; 5985 5986 /* No MIMO power save */ 5987 #define WMI_STA_MIMO_PS_MODE_DISABLE 5988 /* mimo powersave mode static*/ 5989 #define WMI_STA_MIMO_PS_MODE_STATIC 5990 /* mimo powersave mode dynamic */ 5991 #define WMI_STA_MIMO_PS_MODE_DYNAMIC 5992 5993 struct wmi_sta_mimo_ps_mode_cmd { 5994 /* unique id identifying the VDEV, generated by the caller */ 5995 __le32 vdev_id; 5996 /* mimo powersave mode as defined above */ 5997 __le32 mimo_pwrsave_mode; 5998 } __packed; 5999 6000 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */ 6001 enum wmi_ap_ps_param_uapsd { 6002 WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), 6003 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1), 6004 WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2), 6005 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3), 6006 WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4), 6007 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5), 6008 WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6), 6009 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7), 6010 }; 6011 6012 /* U-APSD maximum service period of peer station */ 6013 enum wmi_ap_ps_peer_param_max_sp { 6014 WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0, 6015 WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1, 6016 WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2, 6017 WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3, 6018 MAX_WMI_AP_PS_PEER_PARAM_MAX_SP, 6019 }; 6020 6021 /* 6022 * AP power save parameter 6023 * Set a power save specific parameter for a peer station 6024 */ 6025 enum wmi_ap_ps_peer_param { 6026 /* Set uapsd configuration for a given peer. 6027 * 6028 * Include the delivery and trigger enabled state for every AC. 6029 * The host MLME needs to set this based on AP capability and stations 6030 * request Set in the association request received from the station. 6031 * 6032 * Lower 8 bits of the value specify the UAPSD configuration. 6033 * 6034 * (see enum wmi_ap_ps_param_uapsd) 6035 * The default value is 0. 6036 */ 6037 WMI_AP_PS_PEER_PARAM_UAPSD = 0, 6038 6039 /* 6040 * Set the service period for a UAPSD capable station 6041 * 6042 * The service period from wme ie in the (re)assoc request frame. 6043 * 6044 * (see enum wmi_ap_ps_peer_param_max_sp) 6045 */ 6046 WMI_AP_PS_PEER_PARAM_MAX_SP = 1, 6047 6048 /* Time in seconds for aging out buffered frames for STA in PS */ 6049 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2, 6050 }; 6051 6052 struct wmi_ap_ps_peer_cmd { 6053 /* unique id identifying the VDEV, generated by the caller */ 6054 __le32 vdev_id; 6055 6056 /* peer MAC address */ 6057 struct wmi_mac_addr peer_macaddr; 6058 6059 /* AP powersave param (see enum wmi_ap_ps_peer_param) */ 6060 __le32 param_id; 6061 6062 /* AP powersave param value */ 6063 __le32 param_value; 6064 } __packed; 6065 6066 /* 128 clients = 4 words */ 6067 #define WMI_TIM_BITMAP_ARRAY_SIZE 4 6068 6069 struct wmi_tim_info { 6070 __le32 tim_len; 6071 __le32 tim_mcast; 6072 __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE]; 6073 __le32 tim_changed; 6074 __le32 tim_num_ps_pending; 6075 } __packed; 6076 6077 struct wmi_tim_info_arg { 6078 __le32 tim_len; 6079 __le32 tim_mcast; 6080 const __le32 *tim_bitmap; 6081 __le32 tim_changed; 6082 __le32 tim_num_ps_pending; 6083 } __packed; 6084 6085 /* Maximum number of NOA Descriptors supported */ 6086 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4 6087 #define WMI_P2P_OPPPS_ENABLE_BIT BIT(0) 6088 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1 6089 #define WMI_P2P_NOA_CHANGED_BIT BIT(0) 6090 6091 struct wmi_p2p_noa_info { 6092 /* Bit 0 - Flag to indicate an update in NOA schedule 6093 * Bits 7-1 - Reserved 6094 */ 6095 u8 changed; 6096 /* NOA index */ 6097 u8 index; 6098 /* Bit 0 - Opp PS state of the AP 6099 * Bits 1-7 - Ctwindow in TUs 6100 */ 6101 u8 ctwindow_oppps; 6102 /* Number of NOA descriptors */ 6103 u8 num_descriptors; 6104 6105 struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS]; 6106 } __packed; 6107 6108 struct wmi_bcn_info { 6109 struct wmi_tim_info tim_info; 6110 struct wmi_p2p_noa_info p2p_noa_info; 6111 } __packed; 6112 6113 struct wmi_host_swba_event { 6114 __le32 vdev_map; 6115 struct wmi_bcn_info bcn_info[0]; 6116 } __packed; 6117 6118 struct wmi_10_2_4_bcn_info { 6119 struct wmi_tim_info tim_info; 6120 /* The 10.2.4 FW doesn't have p2p NOA info */ 6121 } __packed; 6122 6123 struct wmi_10_2_4_host_swba_event { 6124 __le32 vdev_map; 6125 struct wmi_10_2_4_bcn_info bcn_info[0]; 6126 } __packed; 6127 6128 /* 16 words = 512 client + 1 word = for guard */ 6129 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17 6130 6131 struct wmi_10_4_tim_info { 6132 __le32 tim_len; 6133 __le32 tim_mcast; 6134 __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE]; 6135 __le32 tim_changed; 6136 __le32 tim_num_ps_pending; 6137 } __packed; 6138 6139 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1 6140 6141 struct wmi_10_4_p2p_noa_info { 6142 /* Bit 0 - Flag to indicate an update in NOA schedule 6143 * Bits 7-1 - Reserved 6144 */ 6145 u8 changed; 6146 /* NOA index */ 6147 u8 index; 6148 /* Bit 0 - Opp PS state of the AP 6149 * Bits 1-7 - Ctwindow in TUs 6150 */ 6151 u8 ctwindow_oppps; 6152 /* Number of NOA descriptors */ 6153 u8 num_descriptors; 6154 6155 struct wmi_p2p_noa_descriptor 6156 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS]; 6157 } __packed; 6158 6159 struct wmi_10_4_bcn_info { 6160 struct wmi_10_4_tim_info tim_info; 6161 struct wmi_10_4_p2p_noa_info p2p_noa_info; 6162 } __packed; 6163 6164 struct wmi_10_4_host_swba_event { 6165 __le32 vdev_map; 6166 struct wmi_10_4_bcn_info bcn_info[0]; 6167 } __packed; 6168 6169 #define WMI_MAX_AP_VDEV 16 6170 6171 struct wmi_tbtt_offset_event { 6172 __le32 vdev_map; 6173 __le32 tbttoffset_list[WMI_MAX_AP_VDEV]; 6174 } __packed; 6175 6176 struct wmi_peer_create_cmd { 6177 __le32 vdev_id; 6178 struct wmi_mac_addr peer_macaddr; 6179 __le32 peer_type; 6180 } __packed; 6181 6182 enum wmi_peer_type { 6183 WMI_PEER_TYPE_DEFAULT = 0, 6184 WMI_PEER_TYPE_BSS = 1, 6185 WMI_PEER_TYPE_TDLS = 2, 6186 }; 6187 6188 struct wmi_peer_delete_cmd { 6189 __le32 vdev_id; 6190 struct wmi_mac_addr peer_macaddr; 6191 } __packed; 6192 6193 struct wmi_peer_flush_tids_cmd { 6194 __le32 vdev_id; 6195 struct wmi_mac_addr peer_macaddr; 6196 __le32 peer_tid_bitmap; 6197 } __packed; 6198 6199 struct wmi_fixed_rate { 6200 /* 6201 * rate mode . 0: disable fixed rate (auto rate) 6202 * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps 6203 * 2: ht20 11n rate specified as mcs index 6204 * 3: ht40 11n rate specified as mcs index 6205 */ 6206 __le32 rate_mode; 6207 /* 6208 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB) 6209 * and series 3 is stored at byte 3 (MSB) 6210 */ 6211 __le32 rate_series; 6212 /* 6213 * 4 retry counts for 4 rate series. retry count for rate 0 is stored 6214 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3 6215 * (MSB) 6216 */ 6217 __le32 rate_retries; 6218 } __packed; 6219 6220 struct wmi_peer_fixed_rate_cmd { 6221 /* unique id identifying the VDEV, generated by the caller */ 6222 __le32 vdev_id; 6223 /* peer MAC address */ 6224 struct wmi_mac_addr peer_macaddr; 6225 /* fixed rate */ 6226 struct wmi_fixed_rate peer_fixed_rate; 6227 } __packed; 6228 6229 #define WMI_MGMT_TID 17 6230 6231 struct wmi_addba_clear_resp_cmd { 6232 /* unique id identifying the VDEV, generated by the caller */ 6233 __le32 vdev_id; 6234 /* peer MAC address */ 6235 struct wmi_mac_addr peer_macaddr; 6236 } __packed; 6237 6238 struct wmi_addba_send_cmd { 6239 /* unique id identifying the VDEV, generated by the caller */ 6240 __le32 vdev_id; 6241 /* peer MAC address */ 6242 struct wmi_mac_addr peer_macaddr; 6243 /* Tid number */ 6244 __le32 tid; 6245 /* Buffer/Window size*/ 6246 __le32 buffersize; 6247 } __packed; 6248 6249 struct wmi_delba_send_cmd { 6250 /* unique id identifying the VDEV, generated by the caller */ 6251 __le32 vdev_id; 6252 /* peer MAC address */ 6253 struct wmi_mac_addr peer_macaddr; 6254 /* Tid number */ 6255 __le32 tid; 6256 /* Is Initiator */ 6257 __le32 initiator; 6258 /* Reason code */ 6259 __le32 reasoncode; 6260 } __packed; 6261 6262 struct wmi_addba_setresponse_cmd { 6263 /* unique id identifying the vdev, generated by the caller */ 6264 __le32 vdev_id; 6265 /* peer mac address */ 6266 struct wmi_mac_addr peer_macaddr; 6267 /* Tid number */ 6268 __le32 tid; 6269 /* status code */ 6270 __le32 statuscode; 6271 } __packed; 6272 6273 struct wmi_send_singleamsdu_cmd { 6274 /* unique id identifying the vdev, generated by the caller */ 6275 __le32 vdev_id; 6276 /* peer mac address */ 6277 struct wmi_mac_addr peer_macaddr; 6278 /* Tid number */ 6279 __le32 tid; 6280 } __packed; 6281 6282 enum wmi_peer_smps_state { 6283 WMI_PEER_SMPS_PS_NONE = 0x0, 6284 WMI_PEER_SMPS_STATIC = 0x1, 6285 WMI_PEER_SMPS_DYNAMIC = 0x2 6286 }; 6287 6288 enum wmi_peer_chwidth { 6289 WMI_PEER_CHWIDTH_20MHZ = 0, 6290 WMI_PEER_CHWIDTH_40MHZ = 1, 6291 WMI_PEER_CHWIDTH_80MHZ = 2, 6292 WMI_PEER_CHWIDTH_160MHZ = 3, 6293 }; 6294 6295 enum wmi_peer_param { 6296 WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */ 6297 WMI_PEER_AMPDU = 0x2, 6298 WMI_PEER_AUTHORIZE = 0x3, 6299 WMI_PEER_CHAN_WIDTH = 0x4, 6300 WMI_PEER_NSS = 0x5, 6301 WMI_PEER_USE_4ADDR = 0x6, 6302 WMI_PEER_USE_FIXED_PWR = 0x8, 6303 WMI_PEER_PARAM_FIXED_RATE = 0x9, 6304 WMI_PEER_DEBUG = 0xa, 6305 WMI_PEER_PHYMODE = 0xd, 6306 WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */ 6307 }; 6308 6309 struct wmi_peer_set_param_cmd { 6310 __le32 vdev_id; 6311 struct wmi_mac_addr peer_macaddr; 6312 __le32 param_id; 6313 __le32 param_value; 6314 } __packed; 6315 6316 #define MAX_SUPPORTED_RATES 128 6317 6318 struct wmi_rate_set { 6319 /* total number of rates */ 6320 __le32 num_rates; 6321 /* 6322 * rates (each 8bit value) packed into a 32 bit word. 6323 * the rates are filled from least significant byte to most 6324 * significant byte. 6325 */ 6326 __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1]; 6327 } __packed; 6328 6329 struct wmi_rate_set_arg { 6330 unsigned int num_rates; 6331 u8 rates[MAX_SUPPORTED_RATES]; 6332 }; 6333 6334 /* 6335 * NOTE: It would bea good idea to represent the Tx MCS 6336 * info in one word and Rx in another word. This is split 6337 * into multiple words for convenience 6338 */ 6339 struct wmi_vht_rate_set { 6340 __le32 rx_max_rate; /* Max Rx data rate */ 6341 __le32 rx_mcs_set; /* Negotiated RX VHT rates */ 6342 __le32 tx_max_rate; /* Max Tx data rate */ 6343 __le32 tx_mcs_set; /* Negotiated TX VHT rates */ 6344 } __packed; 6345 6346 struct wmi_vht_rate_set_arg { 6347 u32 rx_max_rate; 6348 u32 rx_mcs_set; 6349 u32 tx_max_rate; 6350 u32 tx_mcs_set; 6351 }; 6352 6353 struct wmi_peer_set_rates_cmd { 6354 /* peer MAC address */ 6355 struct wmi_mac_addr peer_macaddr; 6356 /* legacy rate set */ 6357 struct wmi_rate_set peer_legacy_rates; 6358 /* ht rate set */ 6359 struct wmi_rate_set peer_ht_rates; 6360 } __packed; 6361 6362 struct wmi_peer_set_q_empty_callback_cmd { 6363 /* unique id identifying the VDEV, generated by the caller */ 6364 __le32 vdev_id; 6365 /* peer MAC address */ 6366 struct wmi_mac_addr peer_macaddr; 6367 __le32 callback_enable; 6368 } __packed; 6369 6370 struct wmi_peer_flags_map { 6371 u32 auth; 6372 u32 qos; 6373 u32 need_ptk_4_way; 6374 u32 need_gtk_2_way; 6375 u32 apsd; 6376 u32 ht; 6377 u32 bw40; 6378 u32 stbc; 6379 u32 ldbc; 6380 u32 dyn_mimops; 6381 u32 static_mimops; 6382 u32 spatial_mux; 6383 u32 vht; 6384 u32 bw80; 6385 u32 vht_2g; 6386 u32 pmf; 6387 u32 bw160; 6388 }; 6389 6390 enum wmi_peer_flags { 6391 WMI_PEER_AUTH = 0x00000001, 6392 WMI_PEER_QOS = 0x00000002, 6393 WMI_PEER_NEED_PTK_4_WAY = 0x00000004, 6394 WMI_PEER_NEED_GTK_2_WAY = 0x00000010, 6395 WMI_PEER_APSD = 0x00000800, 6396 WMI_PEER_HT = 0x00001000, 6397 WMI_PEER_40MHZ = 0x00002000, 6398 WMI_PEER_STBC = 0x00008000, 6399 WMI_PEER_LDPC = 0x00010000, 6400 WMI_PEER_DYN_MIMOPS = 0x00020000, 6401 WMI_PEER_STATIC_MIMOPS = 0x00040000, 6402 WMI_PEER_SPATIAL_MUX = 0x00200000, 6403 WMI_PEER_VHT = 0x02000000, 6404 WMI_PEER_80MHZ = 0x04000000, 6405 WMI_PEER_VHT_2G = 0x08000000, 6406 WMI_PEER_PMF = 0x10000000, 6407 WMI_PEER_160MHZ = 0x20000000 6408 }; 6409 6410 enum wmi_10x_peer_flags { 6411 WMI_10X_PEER_AUTH = 0x00000001, 6412 WMI_10X_PEER_QOS = 0x00000002, 6413 WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004, 6414 WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010, 6415 WMI_10X_PEER_APSD = 0x00000800, 6416 WMI_10X_PEER_HT = 0x00001000, 6417 WMI_10X_PEER_40MHZ = 0x00002000, 6418 WMI_10X_PEER_STBC = 0x00008000, 6419 WMI_10X_PEER_LDPC = 0x00010000, 6420 WMI_10X_PEER_DYN_MIMOPS = 0x00020000, 6421 WMI_10X_PEER_STATIC_MIMOPS = 0x00040000, 6422 WMI_10X_PEER_SPATIAL_MUX = 0x00200000, 6423 WMI_10X_PEER_VHT = 0x02000000, 6424 WMI_10X_PEER_80MHZ = 0x04000000, 6425 WMI_10X_PEER_160MHZ = 0x20000000 6426 }; 6427 6428 enum wmi_10_2_peer_flags { 6429 WMI_10_2_PEER_AUTH = 0x00000001, 6430 WMI_10_2_PEER_QOS = 0x00000002, 6431 WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004, 6432 WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010, 6433 WMI_10_2_PEER_APSD = 0x00000800, 6434 WMI_10_2_PEER_HT = 0x00001000, 6435 WMI_10_2_PEER_40MHZ = 0x00002000, 6436 WMI_10_2_PEER_STBC = 0x00008000, 6437 WMI_10_2_PEER_LDPC = 0x00010000, 6438 WMI_10_2_PEER_DYN_MIMOPS = 0x00020000, 6439 WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000, 6440 WMI_10_2_PEER_SPATIAL_MUX = 0x00200000, 6441 WMI_10_2_PEER_VHT = 0x02000000, 6442 WMI_10_2_PEER_80MHZ = 0x04000000, 6443 WMI_10_2_PEER_VHT_2G = 0x08000000, 6444 WMI_10_2_PEER_PMF = 0x10000000, 6445 WMI_10_2_PEER_160MHZ = 0x20000000 6446 }; 6447 6448 /* 6449 * Peer rate capabilities. 6450 * 6451 * This is of interest to the ratecontrol 6452 * module which resides in the firmware. The bit definitions are 6453 * consistent with that defined in if_athrate.c. 6454 */ 6455 #define WMI_RC_DS_FLAG 0x01 6456 #define WMI_RC_CW40_FLAG 0x02 6457 #define WMI_RC_SGI_FLAG 0x04 6458 #define WMI_RC_HT_FLAG 0x08 6459 #define WMI_RC_RTSCTS_FLAG 0x10 6460 #define WMI_RC_TX_STBC_FLAG 0x20 6461 #define WMI_RC_RX_STBC_FLAG 0xC0 6462 #define WMI_RC_RX_STBC_FLAG_S 6 6463 #define WMI_RC_WEP_TKIP_FLAG 0x100 6464 #define WMI_RC_TS_FLAG 0x200 6465 #define WMI_RC_UAPSD_FLAG 0x400 6466 6467 /* Maximum listen interval supported by hw in units of beacon interval */ 6468 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5 6469 6470 struct wmi_common_peer_assoc_complete_cmd { 6471 struct wmi_mac_addr peer_macaddr; 6472 __le32 vdev_id; 6473 __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */ 6474 __le32 peer_associd; /* 16 LSBs */ 6475 __le32 peer_flags; 6476 __le32 peer_caps; /* 16 LSBs */ 6477 __le32 peer_listen_intval; 6478 __le32 peer_ht_caps; 6479 __le32 peer_max_mpdu; 6480 __le32 peer_mpdu_density; /* 0..16 */ 6481 __le32 peer_rate_caps; 6482 struct wmi_rate_set peer_legacy_rates; 6483 struct wmi_rate_set peer_ht_rates; 6484 __le32 peer_nss; /* num of spatial streams */ 6485 __le32 peer_vht_caps; 6486 __le32 peer_phymode; 6487 struct wmi_vht_rate_set peer_vht_rates; 6488 }; 6489 6490 struct wmi_main_peer_assoc_complete_cmd { 6491 struct wmi_common_peer_assoc_complete_cmd cmd; 6492 6493 /* HT Operation Element of the peer. Five bytes packed in 2 6494 * INT32 array and filled from lsb to msb. 6495 */ 6496 __le32 peer_ht_info[2]; 6497 } __packed; 6498 6499 struct wmi_10_1_peer_assoc_complete_cmd { 6500 struct wmi_common_peer_assoc_complete_cmd cmd; 6501 } __packed; 6502 6503 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0 6504 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f 6505 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4 6506 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0 6507 6508 struct wmi_10_2_peer_assoc_complete_cmd { 6509 struct wmi_common_peer_assoc_complete_cmd cmd; 6510 __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */ 6511 } __packed; 6512 6513 /* NSS Mapping to FW */ 6514 #define WMI_PEER_NSS_MAP_ENABLE BIT(31) 6515 #define WMI_PEER_NSS_160MHZ_MASK GENMASK(2, 0) 6516 #define WMI_PEER_NSS_80_80MHZ_MASK GENMASK(5, 3) 6517 6518 struct wmi_10_4_peer_assoc_complete_cmd { 6519 struct wmi_10_2_peer_assoc_complete_cmd cmd; 6520 __le32 peer_bw_rxnss_override; 6521 } __packed; 6522 6523 struct wmi_peer_assoc_complete_arg { 6524 u8 addr[ETH_ALEN]; 6525 u32 vdev_id; 6526 bool peer_reassoc; 6527 u16 peer_aid; 6528 u32 peer_flags; /* see %WMI_PEER_ */ 6529 u16 peer_caps; 6530 u32 peer_listen_intval; 6531 u32 peer_ht_caps; 6532 u32 peer_max_mpdu; 6533 u32 peer_mpdu_density; /* 0..16 */ 6534 u32 peer_rate_caps; /* see %WMI_RC_ */ 6535 struct wmi_rate_set_arg peer_legacy_rates; 6536 struct wmi_rate_set_arg peer_ht_rates; 6537 u32 peer_num_spatial_streams; 6538 u32 peer_vht_caps; 6539 enum wmi_phy_mode peer_phymode; 6540 struct wmi_vht_rate_set_arg peer_vht_rates; 6541 u32 peer_bw_rxnss_override; 6542 }; 6543 6544 struct wmi_peer_add_wds_entry_cmd { 6545 /* peer MAC address */ 6546 struct wmi_mac_addr peer_macaddr; 6547 /* wds MAC addr */ 6548 struct wmi_mac_addr wds_macaddr; 6549 } __packed; 6550 6551 struct wmi_peer_remove_wds_entry_cmd { 6552 /* wds MAC addr */ 6553 struct wmi_mac_addr wds_macaddr; 6554 } __packed; 6555 6556 struct wmi_peer_q_empty_callback_event { 6557 /* peer MAC address */ 6558 struct wmi_mac_addr peer_macaddr; 6559 } __packed; 6560 6561 /* 6562 * Channel info WMI event 6563 */ 6564 struct wmi_chan_info_event { 6565 __le32 err_code; 6566 __le32 freq; 6567 __le32 cmd_flags; 6568 __le32 noise_floor; 6569 __le32 rx_clear_count; 6570 __le32 cycle_count; 6571 } __packed; 6572 6573 struct wmi_10_4_chan_info_event { 6574 __le32 err_code; 6575 __le32 freq; 6576 __le32 cmd_flags; 6577 __le32 noise_floor; 6578 __le32 rx_clear_count; 6579 __le32 cycle_count; 6580 __le32 chan_tx_pwr_range; 6581 __le32 chan_tx_pwr_tp; 6582 __le32 rx_frame_count; 6583 } __packed; 6584 6585 struct wmi_peer_sta_kickout_event { 6586 struct wmi_mac_addr peer_macaddr; 6587 } __packed; 6588 6589 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0) 6590 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1) 6591 6592 /* Beacon filter wmi command info */ 6593 #define BCN_FLT_MAX_SUPPORTED_IES 256 6594 #define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32) 6595 6596 struct bss_bcn_stats { 6597 __le32 vdev_id; 6598 __le32 bss_bcnsdropped; 6599 __le32 bss_bcnsdelivered; 6600 } __packed; 6601 6602 struct bcn_filter_stats { 6603 __le32 bcns_dropped; 6604 __le32 bcns_delivered; 6605 __le32 activefilters; 6606 struct bss_bcn_stats bss_stats; 6607 } __packed; 6608 6609 struct wmi_add_bcn_filter_cmd { 6610 u32 vdev_id; 6611 u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST]; 6612 } __packed; 6613 6614 enum wmi_sta_keepalive_method { 6615 WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1, 6616 WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2, 6617 }; 6618 6619 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0 6620 6621 /* Firmware crashes if keepalive interval exceeds this limit */ 6622 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff 6623 6624 /* note: ip4 addresses are in network byte order, i.e. big endian */ 6625 struct wmi_sta_keepalive_arp_resp { 6626 __be32 src_ip4_addr; 6627 __be32 dest_ip4_addr; 6628 struct wmi_mac_addr dest_mac_addr; 6629 } __packed; 6630 6631 struct wmi_sta_keepalive_cmd { 6632 __le32 vdev_id; 6633 __le32 enabled; 6634 __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */ 6635 __le32 interval; /* in seconds */ 6636 struct wmi_sta_keepalive_arp_resp arp_resp; 6637 } __packed; 6638 6639 struct wmi_sta_keepalive_arg { 6640 u32 vdev_id; 6641 u32 enabled; 6642 u32 method; 6643 u32 interval; 6644 __be32 src_ip4_addr; 6645 __be32 dest_ip4_addr; 6646 const u8 dest_mac_addr[ETH_ALEN]; 6647 }; 6648 6649 enum wmi_force_fw_hang_type { 6650 WMI_FORCE_FW_HANG_ASSERT = 1, 6651 WMI_FORCE_FW_HANG_NO_DETECT, 6652 WMI_FORCE_FW_HANG_CTRL_EP_FULL, 6653 WMI_FORCE_FW_HANG_EMPTY_POINT, 6654 WMI_FORCE_FW_HANG_STACK_OVERFLOW, 6655 WMI_FORCE_FW_HANG_INFINITE_LOOP, 6656 }; 6657 6658 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF 6659 6660 struct wmi_force_fw_hang_cmd { 6661 __le32 type; 6662 __le32 delay_ms; 6663 } __packed; 6664 6665 enum wmi_pdev_reset_mode_type { 6666 WMI_RST_MODE_TX_FLUSH = 1, 6667 WMI_RST_MODE_WARM_RESET, 6668 WMI_RST_MODE_COLD_RESET, 6669 WMI_RST_MODE_WARM_RESET_RESTORE_CAL, 6670 WMI_RST_MODE_COLD_RESET_RESTORE_CAL, 6671 WMI_RST_MODE_MAX, 6672 }; 6673 6674 enum ath10k_dbglog_level { 6675 ATH10K_DBGLOG_LEVEL_VERBOSE = 0, 6676 ATH10K_DBGLOG_LEVEL_INFO = 1, 6677 ATH10K_DBGLOG_LEVEL_WARN = 2, 6678 ATH10K_DBGLOG_LEVEL_ERR = 3, 6679 }; 6680 6681 /* VAP ids to enable dbglog */ 6682 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0 6683 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff 6684 6685 /* to enable dbglog in the firmware */ 6686 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16 6687 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000 6688 6689 /* timestamp resolution */ 6690 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17 6691 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000 6692 6693 /* number of queued messages before sending them to the host */ 6694 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20 6695 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000 6696 6697 /* 6698 * Log levels to enable. This defines the minimum level to enable, this is 6699 * not a bitmask. See enum ath10k_dbglog_level for the values. 6700 */ 6701 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28 6702 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000 6703 6704 /* 6705 * Note: this is a cleaned up version of a struct firmware uses. For 6706 * example, config_valid was hidden inside an array. 6707 */ 6708 struct wmi_dbglog_cfg_cmd { 6709 /* bitmask to hold mod id config*/ 6710 __le32 module_enable; 6711 6712 /* see ATH10K_DBGLOG_CFG_ */ 6713 __le32 config_enable; 6714 6715 /* mask of module id bits to be changed */ 6716 __le32 module_valid; 6717 6718 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6719 __le32 config_valid; 6720 } __packed; 6721 6722 struct wmi_10_4_dbglog_cfg_cmd { 6723 /* bitmask to hold mod id config*/ 6724 __le64 module_enable; 6725 6726 /* see ATH10K_DBGLOG_CFG_ */ 6727 __le32 config_enable; 6728 6729 /* mask of module id bits to be changed */ 6730 __le64 module_valid; 6731 6732 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ 6733 __le32 config_valid; 6734 } __packed; 6735 6736 enum wmi_roam_reason { 6737 WMI_ROAM_REASON_BETTER_AP = 1, 6738 WMI_ROAM_REASON_BEACON_MISS = 2, 6739 WMI_ROAM_REASON_LOW_RSSI = 3, 6740 WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4, 6741 WMI_ROAM_REASON_HO_FAILED = 5, 6742 6743 /* keep last */ 6744 WMI_ROAM_REASON_MAX, 6745 }; 6746 6747 struct wmi_roam_ev { 6748 __le32 vdev_id; 6749 __le32 reason; 6750 } __packed; 6751 6752 #define ATH10K_FRAGMT_THRESHOLD_MIN 540 6753 #define ATH10K_FRAGMT_THRESHOLD_MAX 2346 6754 6755 #define WMI_MAX_EVENT 0x1000 6756 /* Maximum number of pending TXed WMI packets */ 6757 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr) 6758 6759 /* By default disable power save for IBSS */ 6760 #define ATH10K_DEFAULT_ATIM 0 6761 6762 #define WMI_MAX_MEM_REQS 16 6763 6764 struct wmi_scan_ev_arg { 6765 __le32 event_type; /* %WMI_SCAN_EVENT_ */ 6766 __le32 reason; /* %WMI_SCAN_REASON_ */ 6767 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */ 6768 __le32 scan_req_id; 6769 __le32 scan_id; 6770 __le32 vdev_id; 6771 }; 6772 6773 struct mgmt_tx_compl_params { 6774 u32 desc_id; 6775 u32 status; 6776 u32 ppdu_id; 6777 int ack_rssi; 6778 }; 6779 6780 struct wmi_tlv_mgmt_tx_compl_ev_arg { 6781 __le32 desc_id; 6782 __le32 status; 6783 __le32 pdev_id; 6784 __le32 ppdu_id; 6785 __le32 ack_rssi; 6786 }; 6787 6788 struct wmi_tlv_mgmt_tx_bundle_compl_ev_arg { 6789 __le32 num_reports; 6790 const __le32 *desc_ids; 6791 const __le32 *status; 6792 const __le32 *ppdu_ids; 6793 const __le32 *ack_rssi; 6794 }; 6795 6796 struct wmi_peer_delete_resp_ev_arg { 6797 __le32 vdev_id; 6798 struct wmi_mac_addr peer_addr; 6799 }; 6800 6801 #define WMI_MGMT_RX_NUM_RSSI 4 6802 struct wmi_mgmt_rx_ev_arg { 6803 __le32 channel; 6804 __le32 snr; 6805 __le32 rate; 6806 __le32 phy_mode; 6807 __le32 buf_len; 6808 __le32 status; /* %WMI_RX_STATUS_ */ 6809 struct wmi_mgmt_rx_ext_info ext_info; 6810 __le32 rssi[WMI_MGMT_RX_NUM_RSSI]; 6811 }; 6812 6813 struct wmi_ch_info_ev_arg { 6814 __le32 err_code; 6815 __le32 freq; 6816 __le32 cmd_flags; 6817 __le32 noise_floor; 6818 __le32 rx_clear_count; 6819 __le32 cycle_count; 6820 __le32 chan_tx_pwr_range; 6821 __le32 chan_tx_pwr_tp; 6822 __le32 rx_frame_count; 6823 __le32 my_bss_rx_cycle_count; 6824 __le32 rx_11b_mode_data_duration; 6825 __le32 tx_frame_cnt; 6826 __le32 mac_clk_mhz; 6827 }; 6828 6829 /* From 10.4 firmware, not sure all have the same values. */ 6830 enum wmi_vdev_start_status { 6831 WMI_VDEV_START_OK = 0, 6832 WMI_VDEV_START_CHAN_INVALID, 6833 }; 6834 6835 struct wmi_vdev_start_ev_arg { 6836 __le32 vdev_id; 6837 __le32 req_id; 6838 __le32 resp_type; /* %WMI_VDEV_RESP_ */ 6839 __le32 status; /* See wmi_vdev_start_status enum above */ 6840 }; 6841 6842 struct wmi_peer_kick_ev_arg { 6843 const u8 *mac_addr; 6844 }; 6845 6846 struct wmi_swba_ev_arg { 6847 __le32 vdev_map; 6848 struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV]; 6849 const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV]; 6850 }; 6851 6852 struct wmi_phyerr_ev_arg { 6853 u32 tsf_timestamp; 6854 u16 freq1; 6855 u16 freq2; 6856 u8 rssi_combined; 6857 u8 chan_width_mhz; 6858 u8 phy_err_code; 6859 u16 nf_chains[4]; 6860 u32 buf_len; 6861 const u8 *buf; 6862 u8 hdr_len; 6863 }; 6864 6865 struct wmi_phyerr_hdr_arg { 6866 u32 num_phyerrs; 6867 u32 tsf_l32; 6868 u32 tsf_u32; 6869 u32 buf_len; 6870 const void *phyerrs; 6871 }; 6872 6873 struct wmi_dfs_status_ev_arg { 6874 u32 status; 6875 }; 6876 6877 struct wmi_svc_rdy_ev_arg { 6878 __le32 min_tx_power; 6879 __le32 max_tx_power; 6880 __le32 ht_cap; 6881 __le32 vht_cap; 6882 __le32 vht_supp_mcs; 6883 __le32 sw_ver0; 6884 __le32 sw_ver1; 6885 __le32 fw_build; 6886 __le32 phy_capab; 6887 __le32 num_rf_chains; 6888 __le32 eeprom_rd; 6889 __le32 num_mem_reqs; 6890 __le32 low_2ghz_chan; 6891 __le32 high_2ghz_chan; 6892 __le32 low_5ghz_chan; 6893 __le32 high_5ghz_chan; 6894 __le32 sys_cap_info; 6895 const __le32 *service_map; 6896 size_t service_map_len; 6897 const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS]; 6898 }; 6899 6900 struct wmi_svc_avail_ev_arg { 6901 __le32 service_map_ext_len; 6902 const __le32 *service_map_ext; 6903 }; 6904 6905 struct wmi_rdy_ev_arg { 6906 __le32 sw_version; 6907 __le32 abi_version; 6908 __le32 status; 6909 const u8 *mac_addr; 6910 }; 6911 6912 struct wmi_roam_ev_arg { 6913 __le32 vdev_id; 6914 __le32 reason; 6915 __le32 rssi; 6916 }; 6917 6918 struct wmi_echo_ev_arg { 6919 __le32 value; 6920 }; 6921 6922 struct wmi_pdev_temperature_event { 6923 /* temperature value in Celcius degree */ 6924 __le32 temperature; 6925 } __packed; 6926 6927 struct wmi_pdev_bss_chan_info_event { 6928 __le32 freq; 6929 __le32 noise_floor; 6930 __le64 cycle_busy; 6931 __le64 cycle_total; 6932 __le64 cycle_tx; 6933 __le64 cycle_rx; 6934 __le64 cycle_rx_bss; 6935 __le32 reserved; 6936 } __packed; 6937 6938 /* WOW structures */ 6939 enum wmi_wow_wakeup_event { 6940 WOW_BMISS_EVENT = 0, 6941 WOW_BETTER_AP_EVENT, 6942 WOW_DEAUTH_RECVD_EVENT, 6943 WOW_MAGIC_PKT_RECVD_EVENT, 6944 WOW_GTK_ERR_EVENT, 6945 WOW_FOURWAY_HSHAKE_EVENT, 6946 WOW_EAPOL_RECVD_EVENT, 6947 WOW_NLO_DETECTED_EVENT, 6948 WOW_DISASSOC_RECVD_EVENT, 6949 WOW_PATTERN_MATCH_EVENT, 6950 WOW_CSA_IE_EVENT, 6951 WOW_PROBE_REQ_WPS_IE_EVENT, 6952 WOW_AUTH_REQ_EVENT, 6953 WOW_ASSOC_REQ_EVENT, 6954 WOW_HTT_EVENT, 6955 WOW_RA_MATCH_EVENT, 6956 WOW_HOST_AUTO_SHUTDOWN_EVENT, 6957 WOW_IOAC_MAGIC_EVENT, 6958 WOW_IOAC_SHORT_EVENT, 6959 WOW_IOAC_EXTEND_EVENT, 6960 WOW_IOAC_TIMER_EVENT, 6961 WOW_DFS_PHYERR_RADAR_EVENT, 6962 WOW_BEACON_EVENT, 6963 WOW_CLIENT_KICKOUT_EVENT, 6964 WOW_EVENT_MAX, 6965 }; 6966 6967 #define C2S(x) case x: return #x 6968 6969 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev) 6970 { 6971 switch (ev) { 6972 C2S(WOW_BMISS_EVENT); 6973 C2S(WOW_BETTER_AP_EVENT); 6974 C2S(WOW_DEAUTH_RECVD_EVENT); 6975 C2S(WOW_MAGIC_PKT_RECVD_EVENT); 6976 C2S(WOW_GTK_ERR_EVENT); 6977 C2S(WOW_FOURWAY_HSHAKE_EVENT); 6978 C2S(WOW_EAPOL_RECVD_EVENT); 6979 C2S(WOW_NLO_DETECTED_EVENT); 6980 C2S(WOW_DISASSOC_RECVD_EVENT); 6981 C2S(WOW_PATTERN_MATCH_EVENT); 6982 C2S(WOW_CSA_IE_EVENT); 6983 C2S(WOW_PROBE_REQ_WPS_IE_EVENT); 6984 C2S(WOW_AUTH_REQ_EVENT); 6985 C2S(WOW_ASSOC_REQ_EVENT); 6986 C2S(WOW_HTT_EVENT); 6987 C2S(WOW_RA_MATCH_EVENT); 6988 C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT); 6989 C2S(WOW_IOAC_MAGIC_EVENT); 6990 C2S(WOW_IOAC_SHORT_EVENT); 6991 C2S(WOW_IOAC_EXTEND_EVENT); 6992 C2S(WOW_IOAC_TIMER_EVENT); 6993 C2S(WOW_DFS_PHYERR_RADAR_EVENT); 6994 C2S(WOW_BEACON_EVENT); 6995 C2S(WOW_CLIENT_KICKOUT_EVENT); 6996 C2S(WOW_EVENT_MAX); 6997 default: 6998 return NULL; 6999 } 7000 } 7001 7002 enum wmi_wow_wake_reason { 7003 WOW_REASON_UNSPECIFIED = -1, 7004 WOW_REASON_NLOD = 0, 7005 WOW_REASON_AP_ASSOC_LOST, 7006 WOW_REASON_LOW_RSSI, 7007 WOW_REASON_DEAUTH_RECVD, 7008 WOW_REASON_DISASSOC_RECVD, 7009 WOW_REASON_GTK_HS_ERR, 7010 WOW_REASON_EAP_REQ, 7011 WOW_REASON_FOURWAY_HS_RECV, 7012 WOW_REASON_TIMER_INTR_RECV, 7013 WOW_REASON_PATTERN_MATCH_FOUND, 7014 WOW_REASON_RECV_MAGIC_PATTERN, 7015 WOW_REASON_P2P_DISC, 7016 WOW_REASON_WLAN_HB, 7017 WOW_REASON_CSA_EVENT, 7018 WOW_REASON_PROBE_REQ_WPS_IE_RECV, 7019 WOW_REASON_AUTH_REQ_RECV, 7020 WOW_REASON_ASSOC_REQ_RECV, 7021 WOW_REASON_HTT_EVENT, 7022 WOW_REASON_RA_MATCH, 7023 WOW_REASON_HOST_AUTO_SHUTDOWN, 7024 WOW_REASON_IOAC_MAGIC_EVENT, 7025 WOW_REASON_IOAC_SHORT_EVENT, 7026 WOW_REASON_IOAC_EXTEND_EVENT, 7027 WOW_REASON_IOAC_TIMER_EVENT, 7028 WOW_REASON_ROAM_HO, 7029 WOW_REASON_DFS_PHYERR_RADADR_EVENT, 7030 WOW_REASON_BEACON_RECV, 7031 WOW_REASON_CLIENT_KICKOUT_EVENT, 7032 WOW_REASON_DEBUG_TEST = 0xFF, 7033 }; 7034 7035 static inline const char *wow_reason(enum wmi_wow_wake_reason reason) 7036 { 7037 switch (reason) { 7038 C2S(WOW_REASON_UNSPECIFIED); 7039 C2S(WOW_REASON_NLOD); 7040 C2S(WOW_REASON_AP_ASSOC_LOST); 7041 C2S(WOW_REASON_LOW_RSSI); 7042 C2S(WOW_REASON_DEAUTH_RECVD); 7043 C2S(WOW_REASON_DISASSOC_RECVD); 7044 C2S(WOW_REASON_GTK_HS_ERR); 7045 C2S(WOW_REASON_EAP_REQ); 7046 C2S(WOW_REASON_FOURWAY_HS_RECV); 7047 C2S(WOW_REASON_TIMER_INTR_RECV); 7048 C2S(WOW_REASON_PATTERN_MATCH_FOUND); 7049 C2S(WOW_REASON_RECV_MAGIC_PATTERN); 7050 C2S(WOW_REASON_P2P_DISC); 7051 C2S(WOW_REASON_WLAN_HB); 7052 C2S(WOW_REASON_CSA_EVENT); 7053 C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV); 7054 C2S(WOW_REASON_AUTH_REQ_RECV); 7055 C2S(WOW_REASON_ASSOC_REQ_RECV); 7056 C2S(WOW_REASON_HTT_EVENT); 7057 C2S(WOW_REASON_RA_MATCH); 7058 C2S(WOW_REASON_HOST_AUTO_SHUTDOWN); 7059 C2S(WOW_REASON_IOAC_MAGIC_EVENT); 7060 C2S(WOW_REASON_IOAC_SHORT_EVENT); 7061 C2S(WOW_REASON_IOAC_EXTEND_EVENT); 7062 C2S(WOW_REASON_IOAC_TIMER_EVENT); 7063 C2S(WOW_REASON_ROAM_HO); 7064 C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT); 7065 C2S(WOW_REASON_BEACON_RECV); 7066 C2S(WOW_REASON_CLIENT_KICKOUT_EVENT); 7067 C2S(WOW_REASON_DEBUG_TEST); 7068 default: 7069 return NULL; 7070 } 7071 } 7072 7073 #undef C2S 7074 7075 struct wmi_wow_ev_arg { 7076 u32 vdev_id; 7077 u32 flag; 7078 enum wmi_wow_wake_reason wake_reason; 7079 u32 data_len; 7080 }; 7081 7082 #define WOW_MIN_PATTERN_SIZE 1 7083 #define WOW_MAX_PATTERN_SIZE 148 7084 #define WOW_MAX_PKT_OFFSET 128 7085 #define WOW_HDR_LEN (sizeof(struct ieee80211_hdr_3addr) + \ 7086 sizeof(struct rfc1042_hdr)) 7087 #define WOW_MAX_REDUCE (WOW_HDR_LEN - sizeof(struct ethhdr) - \ 7088 offsetof(struct ieee80211_hdr_3addr, addr1)) 7089 7090 enum wmi_tdls_state { 7091 WMI_TDLS_DISABLE, 7092 WMI_TDLS_ENABLE_PASSIVE, 7093 WMI_TDLS_ENABLE_ACTIVE, 7094 WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL, 7095 }; 7096 7097 enum wmi_tdls_peer_state { 7098 WMI_TDLS_PEER_STATE_PEERING, 7099 WMI_TDLS_PEER_STATE_CONNECTED, 7100 WMI_TDLS_PEER_STATE_TEARDOWN, 7101 }; 7102 7103 struct wmi_tdls_peer_update_cmd_arg { 7104 u32 vdev_id; 7105 enum wmi_tdls_peer_state peer_state; 7106 u8 addr[ETH_ALEN]; 7107 }; 7108 7109 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32 7110 7111 #define WMI_TDLS_PEER_SP_MASK 0x60 7112 #define WMI_TDLS_PEER_SP_LSB 5 7113 7114 enum wmi_tdls_options { 7115 WMI_TDLS_OFFCHAN_EN = BIT(0), 7116 WMI_TDLS_BUFFER_STA_EN = BIT(1), 7117 WMI_TDLS_SLEEP_STA_EN = BIT(2), 7118 }; 7119 7120 enum { 7121 WMI_TDLS_PEER_QOS_AC_VO = BIT(0), 7122 WMI_TDLS_PEER_QOS_AC_VI = BIT(1), 7123 WMI_TDLS_PEER_QOS_AC_BK = BIT(2), 7124 WMI_TDLS_PEER_QOS_AC_BE = BIT(3), 7125 }; 7126 7127 struct wmi_tdls_peer_capab_arg { 7128 u8 peer_uapsd_queues; 7129 u8 peer_max_sp; 7130 u32 buff_sta_support; 7131 u32 off_chan_support; 7132 u32 peer_curr_operclass; 7133 u32 self_curr_operclass; 7134 u32 peer_chan_len; 7135 u32 peer_operclass_len; 7136 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 7137 u32 is_peer_responder; 7138 u32 pref_offchan_num; 7139 u32 pref_offchan_bw; 7140 }; 7141 7142 struct wmi_10_4_tdls_set_state_cmd { 7143 __le32 vdev_id; 7144 __le32 state; 7145 __le32 notification_interval_ms; 7146 __le32 tx_discovery_threshold; 7147 __le32 tx_teardown_threshold; 7148 __le32 rssi_teardown_threshold; 7149 __le32 rssi_delta; 7150 __le32 tdls_options; 7151 __le32 tdls_peer_traffic_ind_window; 7152 __le32 tdls_peer_traffic_response_timeout_ms; 7153 __le32 tdls_puapsd_mask; 7154 __le32 tdls_puapsd_inactivity_time_ms; 7155 __le32 tdls_puapsd_rx_frame_threshold; 7156 __le32 teardown_notification_ms; 7157 __le32 tdls_peer_kickout_threshold; 7158 } __packed; 7159 7160 struct wmi_tdls_peer_capabilities { 7161 __le32 peer_qos; 7162 __le32 buff_sta_support; 7163 __le32 off_chan_support; 7164 __le32 peer_curr_operclass; 7165 __le32 self_curr_operclass; 7166 __le32 peer_chan_len; 7167 __le32 peer_operclass_len; 7168 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES]; 7169 __le32 is_peer_responder; 7170 __le32 pref_offchan_num; 7171 __le32 pref_offchan_bw; 7172 struct wmi_channel peer_chan_list[1]; 7173 } __packed; 7174 7175 struct wmi_10_4_tdls_peer_update_cmd { 7176 __le32 vdev_id; 7177 struct wmi_mac_addr peer_macaddr; 7178 __le32 peer_state; 7179 __le32 reserved[4]; 7180 struct wmi_tdls_peer_capabilities peer_capab; 7181 } __packed; 7182 7183 enum wmi_tdls_peer_reason { 7184 WMI_TDLS_TEARDOWN_REASON_TX, 7185 WMI_TDLS_TEARDOWN_REASON_RSSI, 7186 WMI_TDLS_TEARDOWN_REASON_SCAN, 7187 WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE, 7188 WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT, 7189 WMI_TDLS_TEARDOWN_REASON_BAD_PTR, 7190 WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE, 7191 WMI_TDLS_ENTER_BUF_STA, 7192 WMI_TDLS_EXIT_BUF_STA, 7193 WMI_TDLS_ENTER_BT_BUSY_MODE, 7194 WMI_TDLS_EXIT_BT_BUSY_MODE, 7195 WMI_TDLS_SCAN_STARTED_EVENT, 7196 WMI_TDLS_SCAN_COMPLETED_EVENT, 7197 }; 7198 7199 enum wmi_tdls_peer_notification { 7200 WMI_TDLS_SHOULD_DISCOVER, 7201 WMI_TDLS_SHOULD_TEARDOWN, 7202 WMI_TDLS_PEER_DISCONNECTED, 7203 WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION, 7204 }; 7205 7206 struct wmi_tdls_peer_event { 7207 struct wmi_mac_addr peer_macaddr; 7208 /* see enum wmi_tdls_peer_notification*/ 7209 __le32 peer_status; 7210 /* see enum wmi_tdls_peer_reason */ 7211 __le32 peer_reason; 7212 __le32 vdev_id; 7213 } __packed; 7214 7215 enum wmi_txbf_conf { 7216 WMI_TXBF_CONF_UNSUPPORTED, 7217 WMI_TXBF_CONF_BEFORE_ASSOC, 7218 WMI_TXBF_CONF_AFTER_ASSOC, 7219 }; 7220 7221 #define WMI_CCA_DETECT_LEVEL_AUTO 0 7222 #define WMI_CCA_DETECT_MARGIN_AUTO 0 7223 7224 struct wmi_pdev_set_adaptive_cca_params { 7225 __le32 enable; 7226 __le32 cca_detect_level; 7227 __le32 cca_detect_margin; 7228 } __packed; 7229 7230 #define WMI_PNO_MAX_SCHED_SCAN_PLANS 2 7231 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_INT 7200 7232 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS 100 7233 #define WMI_PNO_MAX_NETW_CHANNELS 26 7234 #define WMI_PNO_MAX_NETW_CHANNELS_EX 60 7235 #define WMI_PNO_MAX_SUPP_NETWORKS WLAN_SCAN_PARAMS_MAX_SSID 7236 #define WMI_PNO_MAX_IE_LENGTH WLAN_SCAN_PARAMS_MAX_IE_LEN 7237 7238 /*size based of dot11 declaration without extra IEs as we will not carry those for PNO*/ 7239 #define WMI_PNO_MAX_PB_REQ_SIZE 450 7240 7241 #define WMI_PNO_24G_DEFAULT_CH 1 7242 #define WMI_PNO_5G_DEFAULT_CH 36 7243 7244 #define WMI_ACTIVE_MAX_CHANNEL_TIME 40 7245 #define WMI_PASSIVE_MAX_CHANNEL_TIME 110 7246 7247 /* SSID broadcast type */ 7248 enum wmi_SSID_bcast_type { 7249 BCAST_UNKNOWN = 0, 7250 BCAST_NORMAL = 1, 7251 BCAST_HIDDEN = 2, 7252 }; 7253 7254 struct wmi_network_type { 7255 struct wmi_ssid ssid; 7256 u32 authentication; 7257 u32 encryption; 7258 u32 bcast_nw_type; 7259 u8 channel_count; 7260 u16 channels[WMI_PNO_MAX_NETW_CHANNELS_EX]; 7261 s32 rssi_threshold; 7262 } __packed; 7263 7264 struct wmi_pno_scan_req { 7265 u8 enable; 7266 u8 vdev_id; 7267 u8 uc_networks_count; 7268 struct wmi_network_type a_networks[WMI_PNO_MAX_SUPP_NETWORKS]; 7269 u32 fast_scan_period; 7270 u32 slow_scan_period; 7271 u8 fast_scan_max_cycles; 7272 7273 bool do_passive_scan; 7274 7275 u32 delay_start_time; 7276 u32 active_min_time; 7277 u32 active_max_time; 7278 u32 passive_min_time; 7279 u32 passive_max_time; 7280 7281 /* mac address randomization attributes */ 7282 u32 enable_pno_scan_randomization; 7283 u8 mac_addr[ETH_ALEN]; 7284 u8 mac_addr_mask[ETH_ALEN]; 7285 } __packed; 7286 7287 enum wmi_host_platform_type { 7288 WMI_HOST_PLATFORM_HIGH_PERF, 7289 WMI_HOST_PLATFORM_LOW_PERF, 7290 }; 7291 7292 enum wmi_bss_survey_req_type { 7293 WMI_BSS_SURVEY_REQ_TYPE_READ = 1, 7294 WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR, 7295 }; 7296 7297 struct wmi_pdev_chan_info_req_cmd { 7298 __le32 type; 7299 __le32 reserved; 7300 } __packed; 7301 7302 /* bb timing register configurations */ 7303 struct wmi_bb_timing_cfg_arg { 7304 /* Tx_end to pa off timing */ 7305 u32 bb_tx_timing; 7306 7307 /* Tx_end to external pa off timing */ 7308 u32 bb_xpa_timing; 7309 }; 7310 7311 struct wmi_pdev_bb_timing_cfg_cmd { 7312 /* Tx_end to pa off timing */ 7313 __le32 bb_tx_timing; 7314 7315 /* Tx_end to external pa off timing */ 7316 __le32 bb_xpa_timing; 7317 } __packed; 7318 7319 struct ath10k; 7320 struct ath10k_vif; 7321 struct ath10k_fw_stats_pdev; 7322 struct ath10k_fw_stats_peer; 7323 struct ath10k_fw_stats; 7324 7325 int ath10k_wmi_attach(struct ath10k *ar); 7326 void ath10k_wmi_detach(struct ath10k *ar); 7327 void ath10k_wmi_free_host_mem(struct ath10k *ar); 7328 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar); 7329 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar); 7330 7331 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 7332 int ath10k_wmi_connect(struct ath10k *ar); 7333 7334 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len); 7335 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); 7336 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb, 7337 u32 cmd_id); 7338 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg); 7339 7340 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src, 7341 struct ath10k_fw_stats_pdev *dst); 7342 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src, 7343 struct ath10k_fw_stats_pdev *dst); 7344 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src, 7345 struct ath10k_fw_stats_pdev *dst); 7346 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src, 7347 struct ath10k_fw_stats_pdev *dst); 7348 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src, 7349 struct ath10k_fw_stats_peer *dst); 7350 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar, 7351 struct wmi_host_mem_chunks *chunks); 7352 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn, 7353 const struct wmi_start_scan_arg *arg); 7354 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params, 7355 const struct wmi_wmm_params_arg *arg); 7356 void ath10k_wmi_put_wmi_channel(struct ath10k *ar, struct wmi_channel *ch, 7357 const struct wmi_channel_arg *arg); 7358 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg); 7359 7360 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb); 7361 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb); 7362 int ath10k_wmi_event_mgmt_tx_compl(struct ath10k *ar, struct sk_buff *skb); 7363 int ath10k_wmi_event_mgmt_tx_bundle_compl(struct ath10k *ar, struct sk_buff *skb); 7364 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb); 7365 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb); 7366 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb); 7367 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb); 7368 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb); 7369 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb); 7370 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb); 7371 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb); 7372 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb); 7373 void ath10k_wmi_event_dfs(struct ath10k *ar, 7374 struct wmi_phyerr_ev_arg *phyerr, u64 tsf); 7375 void ath10k_wmi_event_spectral_scan(struct ath10k *ar, 7376 struct wmi_phyerr_ev_arg *phyerr, 7377 u64 tsf); 7378 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb); 7379 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb); 7380 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb); 7381 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb); 7382 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb); 7383 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb); 7384 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar, 7385 struct sk_buff *skb); 7386 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar, 7387 struct sk_buff *skb); 7388 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb); 7389 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb); 7390 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb); 7391 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb); 7392 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb); 7393 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar, 7394 struct sk_buff *skb); 7395 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb); 7396 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb); 7397 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb); 7398 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar, 7399 struct sk_buff *skb); 7400 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb); 7401 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb); 7402 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb); 7403 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb); 7404 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb); 7405 void ath10k_wmi_event_service_available(struct ath10k *ar, struct sk_buff *skb); 7406 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf, 7407 int left_len, struct wmi_phyerr_ev_arg *arg); 7408 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar, 7409 struct ath10k_fw_stats *fw_stats, 7410 char *buf); 7411 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar, 7412 struct ath10k_fw_stats *fw_stats, 7413 char *buf); 7414 size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head); 7415 size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head); 7416 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar, 7417 struct ath10k_fw_stats *fw_stats, 7418 char *buf); 7419 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar, 7420 enum wmi_vdev_subtype subtype); 7421 int ath10k_wmi_barrier(struct ath10k *ar); 7422 void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table, 7423 u32 num_tx_chain); 7424 void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb); 7425 7426 #endif /* _WMI_H_ */ 7427