1 /*
2  * Copyright (c) 2014 Qualcomm Atheros, Inc.
3  *
4  * Permission to use, copy, modify, and/or distribute this software for any
5  * purpose with or without fee is hereby granted, provided that the above
6  * copyright notice and this permission notice appear in all copies.
7  *
8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15  */
16 
17 #include <linux/device.h>
18 #include <linux/sysfs.h>
19 #include <linux/thermal.h>
20 #include <linux/hwmon.h>
21 #include <linux/hwmon-sysfs.h>
22 #include "core.h"
23 #include "debug.h"
24 #include "wmi-ops.h"
25 
26 static int ath10k_thermal_get_active_vifs(struct ath10k *ar,
27 					  enum wmi_vdev_type type)
28 {
29 	struct ath10k_vif *arvif;
30 	int count = 0;
31 
32 	lockdep_assert_held(&ar->conf_mutex);
33 
34 	list_for_each_entry(arvif, &ar->arvifs, list) {
35 		if (!arvif->is_started)
36 			continue;
37 
38 		if (!arvif->is_up)
39 			continue;
40 
41 		if (arvif->vdev_type != type)
42 			continue;
43 
44 		count++;
45 	}
46 	return count;
47 }
48 
49 static int ath10k_thermal_get_max_dutycycle(struct thermal_cooling_device *cdev,
50 					    unsigned long *state)
51 {
52 	*state = ATH10K_QUIET_DUTY_CYCLE_MAX;
53 
54 	return 0;
55 }
56 
57 static int ath10k_thermal_get_cur_dutycycle(struct thermal_cooling_device *cdev,
58 					    unsigned long *state)
59 {
60 	struct ath10k *ar = cdev->devdata;
61 
62 	mutex_lock(&ar->conf_mutex);
63 	*state = ar->thermal.duty_cycle;
64 	mutex_unlock(&ar->conf_mutex);
65 
66 	return 0;
67 }
68 
69 static int ath10k_thermal_set_cur_dutycycle(struct thermal_cooling_device *cdev,
70 					    unsigned long duty_cycle)
71 {
72 	struct ath10k *ar = cdev->devdata;
73 	u32 period, duration, enabled;
74 	int num_bss, ret = 0;
75 
76 	mutex_lock(&ar->conf_mutex);
77 	if (ar->state != ATH10K_STATE_ON) {
78 		ret = -ENETDOWN;
79 		goto out;
80 	}
81 
82 	if (duty_cycle > ATH10K_QUIET_DUTY_CYCLE_MAX) {
83 		ath10k_warn(ar, "duty cycle %ld is exceeding the limit %d\n",
84 			    duty_cycle, ATH10K_QUIET_DUTY_CYCLE_MAX);
85 		ret = -EINVAL;
86 		goto out;
87 	}
88 	/* TODO: Right now, thermal mitigation is handled only for single/multi
89 	 * vif AP mode. Since quiet param is not validated in STA mode, it needs
90 	 * to be investigated further to handle multi STA and multi-vif (AP+STA)
91 	 * mode properly.
92 	 */
93 	num_bss = ath10k_thermal_get_active_vifs(ar, WMI_VDEV_TYPE_AP);
94 	if (!num_bss) {
95 		ath10k_warn(ar, "no active AP interfaces\n");
96 		ret = -ENETDOWN;
97 		goto out;
98 	}
99 	period = max(ATH10K_QUIET_PERIOD_MIN,
100 		     (ATH10K_QUIET_PERIOD_DEFAULT / num_bss));
101 	duration = (period * duty_cycle) / 100;
102 	enabled = duration ? 1 : 0;
103 
104 	ret = ath10k_wmi_pdev_set_quiet_mode(ar, period, duration,
105 					     ATH10K_QUIET_START_OFFSET,
106 					     enabled);
107 	if (ret) {
108 		ath10k_warn(ar, "failed to set quiet mode period %u duarion %u enabled %u ret %d\n",
109 			    period, duration, enabled, ret);
110 		goto out;
111 	}
112 	ar->thermal.duty_cycle = duty_cycle;
113 out:
114 	mutex_unlock(&ar->conf_mutex);
115 	return ret;
116 }
117 
118 static struct thermal_cooling_device_ops ath10k_thermal_ops = {
119 	.get_max_state = ath10k_thermal_get_max_dutycycle,
120 	.get_cur_state = ath10k_thermal_get_cur_dutycycle,
121 	.set_cur_state = ath10k_thermal_set_cur_dutycycle,
122 };
123 
124 static ssize_t ath10k_thermal_show_temp(struct device *dev,
125 					struct device_attribute *attr,
126 					char *buf)
127 {
128 	struct ath10k *ar = dev_get_drvdata(dev);
129 	int ret, temperature;
130 
131 	mutex_lock(&ar->conf_mutex);
132 
133 	/* Can't get temperature when the card is off */
134 	if (ar->state != ATH10K_STATE_ON) {
135 		ret = -ENETDOWN;
136 		goto out;
137 	}
138 
139 	reinit_completion(&ar->thermal.wmi_sync);
140 	ret = ath10k_wmi_pdev_get_temperature(ar);
141 	if (ret) {
142 		ath10k_warn(ar, "failed to read temperature %d\n", ret);
143 		goto out;
144 	}
145 
146 	if (test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags)) {
147 		ret = -ESHUTDOWN;
148 		goto out;
149 	}
150 
151 	ret = wait_for_completion_timeout(&ar->thermal.wmi_sync,
152 					  ATH10K_THERMAL_SYNC_TIMEOUT_HZ);
153 	if (ret == 0) {
154 		ath10k_warn(ar, "failed to synchronize thermal read\n");
155 		ret = -ETIMEDOUT;
156 		goto out;
157 	}
158 
159 	spin_lock_bh(&ar->data_lock);
160 	temperature = ar->thermal.temperature;
161 	spin_unlock_bh(&ar->data_lock);
162 
163 	/* display in millidegree celcius */
164 	ret = snprintf(buf, PAGE_SIZE, "%d\n", temperature * 1000);
165 out:
166 	mutex_unlock(&ar->conf_mutex);
167 	return ret;
168 }
169 
170 void ath10k_thermal_event_temperature(struct ath10k *ar, int temperature)
171 {
172 	spin_lock_bh(&ar->data_lock);
173 	ar->thermal.temperature = temperature;
174 	spin_unlock_bh(&ar->data_lock);
175 	complete(&ar->thermal.wmi_sync);
176 }
177 
178 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ath10k_thermal_show_temp,
179 			  NULL, 0);
180 
181 static struct attribute *ath10k_hwmon_attrs[] = {
182 	&sensor_dev_attr_temp1_input.dev_attr.attr,
183 	NULL,
184 };
185 ATTRIBUTE_GROUPS(ath10k_hwmon);
186 
187 int ath10k_thermal_register(struct ath10k *ar)
188 {
189 	struct thermal_cooling_device *cdev;
190 	struct device *hwmon_dev;
191 	int ret;
192 
193 	cdev = thermal_cooling_device_register("ath10k_thermal", ar,
194 					       &ath10k_thermal_ops);
195 
196 	if (IS_ERR(cdev)) {
197 		ath10k_err(ar, "failed to setup thermal device result: %ld\n",
198 			   PTR_ERR(cdev));
199 		return -EINVAL;
200 	}
201 
202 	ret = sysfs_create_link(&ar->dev->kobj, &cdev->device.kobj,
203 				"cooling_device");
204 	if (ret) {
205 		ath10k_err(ar, "failed to create thermal symlink\n");
206 		goto err_cooling_destroy;
207 	}
208 
209 	ar->thermal.cdev = cdev;
210 
211 	/* Do not register hwmon device when temperature reading is not
212 	 * supported by firmware
213 	 */
214 	if (ar->wmi.op_version != ATH10K_FW_WMI_OP_VERSION_10_2_4)
215 		return 0;
216 
217 	/* Avoid linking error on devm_hwmon_device_register_with_groups, I
218 	 * guess linux/hwmon.h is missing proper stubs. */
219 	if (!config_enabled(CONFIG_HWMON))
220 		return 0;
221 
222 	hwmon_dev = devm_hwmon_device_register_with_groups(ar->dev,
223 							   "ath10k_hwmon", ar,
224 							   ath10k_hwmon_groups);
225 	if (IS_ERR(hwmon_dev)) {
226 		ath10k_err(ar, "failed to register hwmon device: %ld\n",
227 			   PTR_ERR(hwmon_dev));
228 		ret = -EINVAL;
229 		goto err_remove_link;
230 	}
231 	return 0;
232 
233 err_remove_link:
234 	sysfs_remove_link(&ar->dev->kobj, "thermal_sensor");
235 err_cooling_destroy:
236 	thermal_cooling_device_unregister(cdev);
237 	return ret;
238 }
239 
240 void ath10k_thermal_unregister(struct ath10k *ar)
241 {
242 	thermal_cooling_device_unregister(ar->thermal.cdev);
243 	sysfs_remove_link(&ar->dev->kobj, "cooling_device");
244 }
245