1 /*
2  * Copyright (c) 2005-2011 Atheros Communications Inc.
3  * Copyright (c) 2011-2016 Qualcomm Atheros, Inc.
4  *
5  * Permission to use, copy, modify, and/or distribute this software for any
6  * purpose with or without fee is hereby granted, provided that the above
7  * copyright notice and this permission notice appear in all copies.
8  *
9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16  */
17 
18 #ifndef __TARGADDRS_H__
19 #define __TARGADDRS_H__
20 
21 #include "hw.h"
22 
23 /*
24  * xxx_HOST_INTEREST_ADDRESS is the address in Target RAM of the
25  * host_interest structure.  It must match the address of the _host_interest
26  * symbol (see linker script).
27  *
28  * Host Interest is shared between Host and Target in order to coordinate
29  * between the two, and is intended to remain constant (with additions only
30  * at the end) across software releases.
31  *
32  * All addresses are available here so that it's possible to
33  * write a single binary that works with all Target Types.
34  * May be used in assembler code as well as C.
35  */
36 #define QCA988X_HOST_INTEREST_ADDRESS    0x00400800
37 #define HOST_INTEREST_MAX_SIZE          0x200
38 
39 /*
40  * These are items that the Host may need to access via BMI or via the
41  * Diagnostic Window. The position of items in this structure must remain
42  * constant across firmware revisions! Types for each item must be fixed
43  * size across target and host platforms. More items may be added at the end.
44  */
45 struct host_interest {
46 	/*
47 	 * Pointer to application-defined area, if any.
48 	 * Set by Target application during startup.
49 	 */
50 	u32 hi_app_host_interest;			/* 0x00 */
51 
52 	/* Pointer to register dump area, valid after Target crash. */
53 	u32 hi_failure_state;				/* 0x04 */
54 
55 	/* Pointer to debug logging header */
56 	u32 hi_dbglog_hdr;				/* 0x08 */
57 
58 	u32 hi_unused0c;				/* 0x0c */
59 
60 	/*
61 	 * General-purpose flag bits, similar to SOC_OPTION_* flags.
62 	 * Can be used by application rather than by OS.
63 	 */
64 	u32 hi_option_flag;				/* 0x10 */
65 
66 	/*
67 	 * Boolean that determines whether or not to
68 	 * display messages on the serial port.
69 	 */
70 	u32 hi_serial_enable;				/* 0x14 */
71 
72 	/* Start address of DataSet index, if any */
73 	u32 hi_dset_list_head;				/* 0x18 */
74 
75 	/* Override Target application start address */
76 	u32 hi_app_start;				/* 0x1c */
77 
78 	/* Clock and voltage tuning */
79 	u32 hi_skip_clock_init;				/* 0x20 */
80 	u32 hi_core_clock_setting;			/* 0x24 */
81 	u32 hi_cpu_clock_setting;			/* 0x28 */
82 	u32 hi_system_sleep_setting;			/* 0x2c */
83 	u32 hi_xtal_control_setting;			/* 0x30 */
84 	u32 hi_pll_ctrl_setting_24ghz;			/* 0x34 */
85 	u32 hi_pll_ctrl_setting_5ghz;			/* 0x38 */
86 	u32 hi_ref_voltage_trim_setting;		/* 0x3c */
87 	u32 hi_clock_info;				/* 0x40 */
88 
89 	/* Host uses BE CPU or not */
90 	u32 hi_be;					/* 0x44 */
91 
92 	u32 hi_stack;	/* normal stack */			/* 0x48 */
93 	u32 hi_err_stack; /* error stack */		/* 0x4c */
94 	u32 hi_desired_cpu_speed_hz;			/* 0x50 */
95 
96 	/* Pointer to Board Data  */
97 	u32 hi_board_data;				/* 0x54 */
98 
99 	/*
100 	 * Indication of Board Data state:
101 	 *    0: board data is not yet initialized.
102 	 *    1: board data is initialized; unknown size
103 	 *   >1: number of bytes of initialized board data
104 	 */
105 	u32 hi_board_data_initialized;			/* 0x58 */
106 
107 	u32 hi_dset_ram_index_table;			/* 0x5c */
108 
109 	u32 hi_desired_baud_rate;			/* 0x60 */
110 	u32 hi_dbglog_config;				/* 0x64 */
111 	u32 hi_end_ram_reserve_sz;			/* 0x68 */
112 	u32 hi_mbox_io_block_sz;			/* 0x6c */
113 
114 	u32 hi_num_bpatch_streams;			/* 0x70 -- unused */
115 	u32 hi_mbox_isr_yield_limit;			/* 0x74 */
116 
117 	u32 hi_refclk_hz;				/* 0x78 */
118 	u32 hi_ext_clk_detected;			/* 0x7c */
119 	u32 hi_dbg_uart_txpin;				/* 0x80 */
120 	u32 hi_dbg_uart_rxpin;				/* 0x84 */
121 	u32 hi_hci_uart_baud;				/* 0x88 */
122 	u32 hi_hci_uart_pin_assignments;		/* 0x8C */
123 
124 	u32 hi_hci_uart_baud_scale_val;			/* 0x90 */
125 	u32 hi_hci_uart_baud_step_val;			/* 0x94 */
126 
127 	u32 hi_allocram_start;				/* 0x98 */
128 	u32 hi_allocram_sz;				/* 0x9c */
129 	u32 hi_hci_bridge_flags;			/* 0xa0 */
130 	u32 hi_hci_uart_support_pins;			/* 0xa4 */
131 
132 	u32 hi_hci_uart_pwr_mgmt_params;		/* 0xa8 */
133 
134 	/*
135 	 * 0xa8 - [1]: 0 = UART FC active low, 1 = UART FC active high
136 	 *        [31:16]: wakeup timeout in ms
137 	 */
138 	/* Pointer to extended board Data  */
139 	u32 hi_board_ext_data;				/* 0xac */
140 	u32 hi_board_ext_data_config;			/* 0xb0 */
141 	/*
142 	 * Bit [0]  :   valid
143 	 * Bit[31:16:   size
144 	 */
145 	/*
146 	 * hi_reset_flag is used to do some stuff when target reset.
147 	 * such as restore app_start after warm reset or
148 	 * preserve host Interest area, or preserve ROM data, literals etc.
149 	 */
150 	u32  hi_reset_flag;				/* 0xb4 */
151 	/* indicate hi_reset_flag is valid */
152 	u32  hi_reset_flag_valid;			/* 0xb8 */
153 	u32 hi_hci_uart_pwr_mgmt_params_ext;		/* 0xbc */
154 	/* 0xbc - [31:0]: idle timeout in ms */
155 	/* ACS flags */
156 	u32 hi_acs_flags;				/* 0xc0 */
157 	u32 hi_console_flags;				/* 0xc4 */
158 	u32 hi_nvram_state;				/* 0xc8 */
159 	u32 hi_option_flag2;				/* 0xcc */
160 
161 	/* If non-zero, override values sent to Host in WMI_READY event. */
162 	u32 hi_sw_version_override;			/* 0xd0 */
163 	u32 hi_abi_version_override;			/* 0xd4 */
164 
165 	/*
166 	 * Percentage of high priority RX traffic to total expected RX traffic
167 	 * applicable only to ar6004
168 	 */
169 	u32 hi_hp_rx_traffic_ratio;			/* 0xd8 */
170 
171 	/* test applications flags */
172 	u32 hi_test_apps_related;			/* 0xdc */
173 	/* location of test script */
174 	u32 hi_ota_testscript;				/* 0xe0 */
175 	/* location of CAL data */
176 	u32 hi_cal_data;				/* 0xe4 */
177 
178 	/* Number of packet log buffers */
179 	u32 hi_pktlog_num_buffers;			/* 0xe8 */
180 
181 	/* wow extension configuration */
182 	u32 hi_wow_ext_config;				/* 0xec */
183 	u32 hi_pwr_save_flags;				/* 0xf0 */
184 
185 	/* Spatial Multiplexing Power Save (SMPS) options */
186 	u32 hi_smps_options;				/* 0xf4 */
187 
188 	/* Interconnect-specific state */
189 	u32 hi_interconnect_state;			/* 0xf8 */
190 
191 	/* Coex configuration flags */
192 	u32 hi_coex_config;				/* 0xfc */
193 
194 	/* Early allocation support */
195 	u32 hi_early_alloc;				/* 0x100 */
196 	/* FW swap field */
197 	/*
198 	 * Bits of this 32bit word will be used to pass specific swap
199 	 * instruction to FW
200 	 */
201 	/*
202 	 * Bit 0 -- AP Nart descriptor no swap. When this bit is set
203 	 * FW will not swap TX descriptor. Meaning packets are formed
204 	 * on the target processor.
205 	 */
206 	/* Bit 1 - unused */
207 	u32 hi_fw_swap;					/* 0x104 */
208 
209 	/* global arenas pointer address, used by host driver debug */
210 	u32 hi_dynamic_mem_arenas_addr;			/* 0x108 */
211 
212 	/* allocated bytes of DRAM use by allocated */
213 	u32 hi_dynamic_mem_allocated;			/* 0x10C */
214 
215 	/* remaining bytes of DRAM */
216 	u32 hi_dynamic_mem_remaining;			/* 0x110 */
217 
218 	/* memory track count, configured by host */
219 	u32 hi_dynamic_mem_track_max;			/* 0x114 */
220 
221 	/* minidump buffer */
222 	u32 hi_minidump;				/* 0x118 */
223 
224 	/* bdata's sig and key addr */
225 	u32 hi_bd_sig_key;				/* 0x11c */
226 } __packed;
227 
228 #define HI_ITEM(item)  offsetof(struct host_interest, item)
229 
230 /* Bits defined in hi_option_flag */
231 
232 /* Enable timer workaround */
233 #define HI_OPTION_TIMER_WAR         0x01
234 /* Limit BMI command credits */
235 #define HI_OPTION_BMI_CRED_LIMIT    0x02
236 /* Relay Dot11 hdr to/from host */
237 #define HI_OPTION_RELAY_DOT11_HDR   0x04
238 /* MAC addr method 0-locally administred 1-globally unique addrs */
239 #define HI_OPTION_MAC_ADDR_METHOD   0x08
240 /* Firmware Bridging */
241 #define HI_OPTION_FW_BRIDGE         0x10
242 /* Enable CPU profiling */
243 #define HI_OPTION_ENABLE_PROFILE    0x20
244 /* Disable debug logging */
245 #define HI_OPTION_DISABLE_DBGLOG    0x40
246 /* Skip Era Tracking */
247 #define HI_OPTION_SKIP_ERA_TRACKING 0x80
248 /* Disable PAPRD (debug) */
249 #define HI_OPTION_PAPRD_DISABLE     0x100
250 #define HI_OPTION_NUM_DEV_LSB       0x200
251 #define HI_OPTION_NUM_DEV_MSB       0x800
252 #define HI_OPTION_DEV_MODE_LSB      0x1000
253 #define HI_OPTION_DEV_MODE_MSB      0x8000000
254 /* Disable LowFreq Timer Stabilization */
255 #define HI_OPTION_NO_LFT_STBL       0x10000000
256 /* Skip regulatory scan */
257 #define HI_OPTION_SKIP_REG_SCAN     0x20000000
258 /*
259  * Do regulatory scan during init before
260  * sending WMI ready event to host
261  */
262 #define HI_OPTION_INIT_REG_SCAN     0x40000000
263 
264 /* REV6: Do not adjust memory map */
265 #define HI_OPTION_SKIP_MEMMAP       0x80000000
266 
267 #define HI_OPTION_MAC_ADDR_METHOD_SHIFT 3
268 
269 /* 2 bits of hi_option_flag are used to represent 3 modes */
270 #define HI_OPTION_FW_MODE_IBSS    0x0 /* IBSS Mode */
271 #define HI_OPTION_FW_MODE_BSS_STA 0x1 /* STA Mode */
272 #define HI_OPTION_FW_MODE_AP      0x2 /* AP Mode */
273 #define HI_OPTION_FW_MODE_BT30AMP 0x3 /* BT30 AMP Mode */
274 
275 /* 2 bits of hi_option flag are usedto represent 4 submodes */
276 #define HI_OPTION_FW_SUBMODE_NONE    0x0  /* Normal mode */
277 #define HI_OPTION_FW_SUBMODE_P2PDEV  0x1  /* p2p device mode */
278 #define HI_OPTION_FW_SUBMODE_P2PCLIENT 0x2 /* p2p client mode */
279 #define HI_OPTION_FW_SUBMODE_P2PGO   0x3 /* p2p go mode */
280 
281 /* Num dev Mask */
282 #define HI_OPTION_NUM_DEV_MASK    0x7
283 #define HI_OPTION_NUM_DEV_SHIFT   0x9
284 
285 /* firmware bridging */
286 #define HI_OPTION_FW_BRIDGE_SHIFT 0x04
287 
288 /*
289  * Fw Mode/SubMode Mask
290  *-----------------------------------------------------------------------------
291  *  SUB   |   SUB   |   SUB   |  SUB    |         |         |         |
292  *MODE[3] | MODE[2] | MODE[1] | MODE[0] | MODE[3] | MODE[2] | MODE[1] | MODE[0]
293  *  (2)   |   (2)   |   (2)   |   (2)   |   (2)   |   (2)   |   (2)   |   (2)
294  *-----------------------------------------------------------------------------
295  */
296 #define HI_OPTION_FW_MODE_BITS         0x2
297 #define HI_OPTION_FW_MODE_MASK         0x3
298 #define HI_OPTION_FW_MODE_SHIFT        0xC
299 #define HI_OPTION_ALL_FW_MODE_MASK     0xFF
300 
301 #define HI_OPTION_FW_SUBMODE_BITS      0x2
302 #define HI_OPTION_FW_SUBMODE_MASK      0x3
303 #define HI_OPTION_FW_SUBMODE_SHIFT     0x14
304 #define HI_OPTION_ALL_FW_SUBMODE_MASK  0xFF00
305 #define HI_OPTION_ALL_FW_SUBMODE_SHIFT 0x8
306 
307 /* hi_option_flag2 options */
308 #define HI_OPTION_OFFLOAD_AMSDU     0x01
309 #define HI_OPTION_DFS_SUPPORT       0x02 /* Enable DFS support */
310 #define HI_OPTION_ENABLE_RFKILL     0x04 /* RFKill Enable Feature*/
311 #define HI_OPTION_RADIO_RETENTION_DISABLE 0x08 /* Disable radio retention */
312 #define HI_OPTION_EARLY_CFG_DONE    0x10 /* Early configuration is complete */
313 
314 #define HI_OPTION_RF_KILL_SHIFT     0x2
315 #define HI_OPTION_RF_KILL_MASK      0x1
316 
317 /* hi_reset_flag */
318 /* preserve App Start address */
319 #define HI_RESET_FLAG_PRESERVE_APP_START         0x01
320 /* preserve host interest */
321 #define HI_RESET_FLAG_PRESERVE_HOST_INTEREST     0x02
322 /* preserve ROM data */
323 #define HI_RESET_FLAG_PRESERVE_ROMDATA           0x04
324 #define HI_RESET_FLAG_PRESERVE_NVRAM_STATE       0x08
325 #define HI_RESET_FLAG_PRESERVE_BOOT_INFO         0x10
326 #define HI_RESET_FLAG_WARM_RESET	0x20
327 
328 /* define hi_fw_swap bits */
329 #define HI_DESC_IN_FW_BIT	0x01
330 
331 /* indicate the reset flag is valid */
332 #define HI_RESET_FLAG_IS_VALID  0x12345678
333 
334 /* ACS is enabled */
335 #define HI_ACS_FLAGS_ENABLED        (1 << 0)
336 /* Use physical WWAN device */
337 #define HI_ACS_FLAGS_USE_WWAN       (1 << 1)
338 /* Use test VAP */
339 #define HI_ACS_FLAGS_TEST_VAP       (1 << 2)
340 /* SDIO/mailbox ACS flag definitions */
341 #define HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET       (1 << 0)
342 #define HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET    (1 << 1)
343 #define HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE        (1 << 2)
344 #define HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_FW_ACK    (1 << 16)
345 #define HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_FW_ACK (1 << 17)
346 
347 /*
348  * CONSOLE FLAGS
349  *
350  * Bit Range  Meaning
351  * ---------  --------------------------------
352  *   2..0     UART ID (0 = Default)
353  *    3       Baud Select (0 = 9600, 1 = 115200)
354  *   30..4    Reserved
355  *    31      Enable Console
356  *
357  */
358 
359 #define HI_CONSOLE_FLAGS_ENABLE       (1 << 31)
360 #define HI_CONSOLE_FLAGS_UART_MASK    (0x7)
361 #define HI_CONSOLE_FLAGS_UART_SHIFT   0
362 #define HI_CONSOLE_FLAGS_BAUD_SELECT  (1 << 3)
363 
364 /* SM power save options */
365 #define HI_SMPS_ALLOW_MASK            (0x00000001)
366 #define HI_SMPS_MODE_MASK             (0x00000002)
367 #define HI_SMPS_MODE_STATIC           (0x00000000)
368 #define HI_SMPS_MODE_DYNAMIC          (0x00000002)
369 #define HI_SMPS_DISABLE_AUTO_MODE     (0x00000004)
370 #define HI_SMPS_DATA_THRESH_MASK      (0x000007f8)
371 #define HI_SMPS_DATA_THRESH_SHIFT     (3)
372 #define HI_SMPS_RSSI_THRESH_MASK      (0x0007f800)
373 #define HI_SMPS_RSSI_THRESH_SHIFT     (11)
374 #define HI_SMPS_LOWPWR_CM_MASK        (0x00380000)
375 #define HI_SMPS_LOWPWR_CM_SHIFT       (15)
376 #define HI_SMPS_HIPWR_CM_MASK         (0x03c00000)
377 #define HI_SMPS_HIPWR_CM_SHIFT        (19)
378 
379 /*
380  * WOW Extension configuration
381  *
382  * Bit Range  Meaning
383  * ---------  --------------------------------
384  *   8..0     Size of each WOW pattern (max 511)
385  *   15..9    Number of patterns per list (max 127)
386  *   17..16   Number of lists (max 4)
387  *   30..18   Reserved
388  *   31       Enabled
389  *
390  *  set values (except enable) to zeros for default settings
391  */
392 
393 #define HI_WOW_EXT_ENABLED_MASK        (1 << 31)
394 #define HI_WOW_EXT_NUM_LIST_SHIFT      16
395 #define HI_WOW_EXT_NUM_LIST_MASK       (0x3 << HI_WOW_EXT_NUM_LIST_SHIFT)
396 #define HI_WOW_EXT_NUM_PATTERNS_SHIFT  9
397 #define HI_WOW_EXT_NUM_PATTERNS_MASK   (0x7F << HI_WOW_EXT_NUM_PATTERNS_SHIFT)
398 #define HI_WOW_EXT_PATTERN_SIZE_SHIFT  0
399 #define HI_WOW_EXT_PATTERN_SIZE_MASK   (0x1FF << HI_WOW_EXT_PATTERN_SIZE_SHIFT)
400 
401 #define HI_WOW_EXT_MAKE_CONFIG(num_lists, count, size) \
402 	((((num_lists) << HI_WOW_EXT_NUM_LIST_SHIFT) & \
403 		HI_WOW_EXT_NUM_LIST_MASK) | \
404 	(((count) << HI_WOW_EXT_NUM_PATTERNS_SHIFT) & \
405 		HI_WOW_EXT_NUM_PATTERNS_MASK) | \
406 	(((size) << HI_WOW_EXT_PATTERN_SIZE_SHIFT) & \
407 		HI_WOW_EXT_PATTERN_SIZE_MASK))
408 
409 #define HI_WOW_EXT_GET_NUM_LISTS(config) \
410 	(((config) & HI_WOW_EXT_NUM_LIST_MASK) >> HI_WOW_EXT_NUM_LIST_SHIFT)
411 #define HI_WOW_EXT_GET_NUM_PATTERNS(config) \
412 	(((config) & HI_WOW_EXT_NUM_PATTERNS_MASK) >> \
413 		HI_WOW_EXT_NUM_PATTERNS_SHIFT)
414 #define HI_WOW_EXT_GET_PATTERN_SIZE(config) \
415 	(((config) & HI_WOW_EXT_PATTERN_SIZE_MASK) >> \
416 		HI_WOW_EXT_PATTERN_SIZE_SHIFT)
417 
418 /*
419  * Early allocation configuration
420  * Support RAM bank configuration before BMI done and this eases the memory
421  * allocation at very early stage
422  * Bit Range  Meaning
423  * ---------  ----------------------------------
424  * [0:3]      number of bank assigned to be IRAM
425  * [4:15]     reserved
426  * [16:31]    magic number
427  *
428  * Note:
429  * 1. target firmware would check magic number and if it's a match, firmware
430  *    would consider the bits[0:15] are valid and base on that to calculate
431  *    the end of DRAM. Early allocation would be located at that area and
432  *    may be reclaimed when necessary
433  * 2. if no magic number is found, early allocation would happen at "_end"
434  *    symbol of ROM which is located before the app-data and might NOT be
435  *    re-claimable. If this is adopted, link script should keep this in
436  *    mind to avoid data corruption.
437  */
438 #define HI_EARLY_ALLOC_MAGIC		0x6d8a
439 #define HI_EARLY_ALLOC_MAGIC_MASK	0xffff0000
440 #define HI_EARLY_ALLOC_MAGIC_SHIFT	16
441 #define HI_EARLY_ALLOC_IRAM_BANKS_MASK	0x0000000f
442 #define HI_EARLY_ALLOC_IRAM_BANKS_SHIFT	0
443 
444 #define HI_EARLY_ALLOC_VALID() \
445 	((((HOST_INTEREST->hi_early_alloc) & HI_EARLY_ALLOC_MAGIC_MASK) >> \
446 	HI_EARLY_ALLOC_MAGIC_SHIFT) == (HI_EARLY_ALLOC_MAGIC))
447 #define HI_EARLY_ALLOC_GET_IRAM_BANKS() \
448 	(((HOST_INTEREST->hi_early_alloc) & HI_EARLY_ALLOC_IRAM_BANKS_MASK) \
449 	>> HI_EARLY_ALLOC_IRAM_BANKS_SHIFT)
450 
451 /*power save flag bit definitions*/
452 #define HI_PWR_SAVE_LPL_ENABLED   0x1
453 /*b1-b3 reserved*/
454 /*b4-b5 : dev0 LPL type : 0 - none
455  *			  1- Reduce Pwr Search
456  *			  2- Reduce Pwr Listen
457  */
458 /*b6-b7 : dev1 LPL type and so on for Max 8 devices*/
459 #define HI_PWR_SAVE_LPL_DEV0_LSB   4
460 #define HI_PWR_SAVE_LPL_DEV_MASK   0x3
461 /*power save related utility macros*/
462 #define HI_LPL_ENABLED() \
463 	((HOST_INTEREST->hi_pwr_save_flags & HI_PWR_SAVE_LPL_ENABLED))
464 #define HI_DEV_LPL_TYPE_GET(_devix) \
465 	(HOST_INTEREST->hi_pwr_save_flags & ((HI_PWR_SAVE_LPL_DEV_MASK) << \
466 	 (HI_PWR_SAVE_LPL_DEV0_LSB + (_devix) * 2)))
467 
468 #define HOST_INTEREST_SMPS_IS_ALLOWED() \
469 	((HOST_INTEREST->hi_smps_options & HI_SMPS_ALLOW_MASK))
470 
471 /* Reserve 1024 bytes for extended board data */
472 #define QCA988X_BOARD_DATA_SZ     7168
473 #define QCA988X_BOARD_EXT_DATA_SZ 0
474 
475 #define QCA9887_BOARD_DATA_SZ     7168
476 #define QCA9887_BOARD_EXT_DATA_SZ 0
477 
478 #define QCA6174_BOARD_DATA_SZ     8192
479 #define QCA6174_BOARD_EXT_DATA_SZ 0
480 
481 #define QCA9377_BOARD_DATA_SZ     QCA6174_BOARD_DATA_SZ
482 #define QCA9377_BOARD_EXT_DATA_SZ 0
483 
484 #define QCA99X0_BOARD_DATA_SZ	  12288
485 #define QCA99X0_BOARD_EXT_DATA_SZ 0
486 
487 #define QCA4019_BOARD_DATA_SZ	  12064
488 #define QCA4019_BOARD_EXT_DATA_SZ 0
489 
490 #endif /* __TARGADDRS_H__ */
491