1 /* SPDX-License-Identifier: ISC */ 2 /* 3 * Copyright (c) 2005-2011 Atheros Communications Inc. 4 * Copyright (c) 2011-2016 Qualcomm Atheros, Inc. 5 */ 6 7 #ifndef __TARGADDRS_H__ 8 #define __TARGADDRS_H__ 9 10 #include "hw.h" 11 12 /* 13 * xxx_HOST_INTEREST_ADDRESS is the address in Target RAM of the 14 * host_interest structure. It must match the address of the _host_interest 15 * symbol (see linker script). 16 * 17 * Host Interest is shared between Host and Target in order to coordinate 18 * between the two, and is intended to remain constant (with additions only 19 * at the end) across software releases. 20 * 21 * All addresses are available here so that it's possible to 22 * write a single binary that works with all Target Types. 23 * May be used in assembler code as well as C. 24 */ 25 #define QCA988X_HOST_INTEREST_ADDRESS 0x00400800 26 #define HOST_INTEREST_MAX_SIZE 0x200 27 28 /* 29 * These are items that the Host may need to access via BMI or via the 30 * Diagnostic Window. The position of items in this structure must remain 31 * constant across firmware revisions! Types for each item must be fixed 32 * size across target and host platforms. More items may be added at the end. 33 */ 34 struct host_interest { 35 /* 36 * Pointer to application-defined area, if any. 37 * Set by Target application during startup. 38 */ 39 u32 hi_app_host_interest; /* 0x00 */ 40 41 /* Pointer to register dump area, valid after Target crash. */ 42 u32 hi_failure_state; /* 0x04 */ 43 44 /* Pointer to debug logging header */ 45 u32 hi_dbglog_hdr; /* 0x08 */ 46 47 u32 hi_unused0c; /* 0x0c */ 48 49 /* 50 * General-purpose flag bits, similar to SOC_OPTION_* flags. 51 * Can be used by application rather than by OS. 52 */ 53 u32 hi_option_flag; /* 0x10 */ 54 55 /* 56 * Boolean that determines whether or not to 57 * display messages on the serial port. 58 */ 59 u32 hi_serial_enable; /* 0x14 */ 60 61 /* Start address of DataSet index, if any */ 62 u32 hi_dset_list_head; /* 0x18 */ 63 64 /* Override Target application start address */ 65 u32 hi_app_start; /* 0x1c */ 66 67 /* Clock and voltage tuning */ 68 u32 hi_skip_clock_init; /* 0x20 */ 69 u32 hi_core_clock_setting; /* 0x24 */ 70 u32 hi_cpu_clock_setting; /* 0x28 */ 71 u32 hi_system_sleep_setting; /* 0x2c */ 72 u32 hi_xtal_control_setting; /* 0x30 */ 73 u32 hi_pll_ctrl_setting_24ghz; /* 0x34 */ 74 u32 hi_pll_ctrl_setting_5ghz; /* 0x38 */ 75 u32 hi_ref_voltage_trim_setting; /* 0x3c */ 76 u32 hi_clock_info; /* 0x40 */ 77 78 /* Host uses BE CPU or not */ 79 u32 hi_be; /* 0x44 */ 80 81 u32 hi_stack; /* normal stack */ /* 0x48 */ 82 u32 hi_err_stack; /* error stack */ /* 0x4c */ 83 u32 hi_desired_cpu_speed_hz; /* 0x50 */ 84 85 /* Pointer to Board Data */ 86 u32 hi_board_data; /* 0x54 */ 87 88 /* 89 * Indication of Board Data state: 90 * 0: board data is not yet initialized. 91 * 1: board data is initialized; unknown size 92 * >1: number of bytes of initialized board data 93 */ 94 u32 hi_board_data_initialized; /* 0x58 */ 95 96 u32 hi_dset_ram_index_table; /* 0x5c */ 97 98 u32 hi_desired_baud_rate; /* 0x60 */ 99 u32 hi_dbglog_config; /* 0x64 */ 100 u32 hi_end_ram_reserve_sz; /* 0x68 */ 101 u32 hi_mbox_io_block_sz; /* 0x6c */ 102 103 u32 hi_num_bpatch_streams; /* 0x70 -- unused */ 104 u32 hi_mbox_isr_yield_limit; /* 0x74 */ 105 106 u32 hi_refclk_hz; /* 0x78 */ 107 u32 hi_ext_clk_detected; /* 0x7c */ 108 u32 hi_dbg_uart_txpin; /* 0x80 */ 109 u32 hi_dbg_uart_rxpin; /* 0x84 */ 110 u32 hi_hci_uart_baud; /* 0x88 */ 111 u32 hi_hci_uart_pin_assignments; /* 0x8C */ 112 113 u32 hi_hci_uart_baud_scale_val; /* 0x90 */ 114 u32 hi_hci_uart_baud_step_val; /* 0x94 */ 115 116 u32 hi_allocram_start; /* 0x98 */ 117 u32 hi_allocram_sz; /* 0x9c */ 118 u32 hi_hci_bridge_flags; /* 0xa0 */ 119 u32 hi_hci_uart_support_pins; /* 0xa4 */ 120 121 u32 hi_hci_uart_pwr_mgmt_params; /* 0xa8 */ 122 123 /* 124 * 0xa8 - [1]: 0 = UART FC active low, 1 = UART FC active high 125 * [31:16]: wakeup timeout in ms 126 */ 127 /* Pointer to extended board Data */ 128 u32 hi_board_ext_data; /* 0xac */ 129 u32 hi_board_ext_data_config; /* 0xb0 */ 130 /* 131 * Bit [0] : valid 132 * Bit[31:16: size 133 */ 134 /* 135 * hi_reset_flag is used to do some stuff when target reset. 136 * such as restore app_start after warm reset or 137 * preserve host Interest area, or preserve ROM data, literals etc. 138 */ 139 u32 hi_reset_flag; /* 0xb4 */ 140 /* indicate hi_reset_flag is valid */ 141 u32 hi_reset_flag_valid; /* 0xb8 */ 142 u32 hi_hci_uart_pwr_mgmt_params_ext; /* 0xbc */ 143 /* 0xbc - [31:0]: idle timeout in ms */ 144 /* ACS flags */ 145 u32 hi_acs_flags; /* 0xc0 */ 146 u32 hi_console_flags; /* 0xc4 */ 147 u32 hi_nvram_state; /* 0xc8 */ 148 u32 hi_option_flag2; /* 0xcc */ 149 150 /* If non-zero, override values sent to Host in WMI_READY event. */ 151 u32 hi_sw_version_override; /* 0xd0 */ 152 u32 hi_abi_version_override; /* 0xd4 */ 153 154 /* 155 * Percentage of high priority RX traffic to total expected RX traffic 156 * applicable only to ar6004 157 */ 158 u32 hi_hp_rx_traffic_ratio; /* 0xd8 */ 159 160 /* test applications flags */ 161 u32 hi_test_apps_related; /* 0xdc */ 162 /* location of test script */ 163 u32 hi_ota_testscript; /* 0xe0 */ 164 /* location of CAL data */ 165 u32 hi_cal_data; /* 0xe4 */ 166 167 /* Number of packet log buffers */ 168 u32 hi_pktlog_num_buffers; /* 0xe8 */ 169 170 /* wow extension configuration */ 171 u32 hi_wow_ext_config; /* 0xec */ 172 u32 hi_pwr_save_flags; /* 0xf0 */ 173 174 /* Spatial Multiplexing Power Save (SMPS) options */ 175 u32 hi_smps_options; /* 0xf4 */ 176 177 /* Interconnect-specific state */ 178 u32 hi_interconnect_state; /* 0xf8 */ 179 180 /* Coex configuration flags */ 181 u32 hi_coex_config; /* 0xfc */ 182 183 /* Early allocation support */ 184 u32 hi_early_alloc; /* 0x100 */ 185 /* FW swap field */ 186 /* 187 * Bits of this 32bit word will be used to pass specific swap 188 * instruction to FW 189 */ 190 /* 191 * Bit 0 -- AP Nart descriptor no swap. When this bit is set 192 * FW will not swap TX descriptor. Meaning packets are formed 193 * on the target processor. 194 */ 195 /* Bit 1 - unused */ 196 u32 hi_fw_swap; /* 0x104 */ 197 198 /* global arenas pointer address, used by host driver debug */ 199 u32 hi_dynamic_mem_arenas_addr; /* 0x108 */ 200 201 /* allocated bytes of DRAM use by allocated */ 202 u32 hi_dynamic_mem_allocated; /* 0x10C */ 203 204 /* remaining bytes of DRAM */ 205 u32 hi_dynamic_mem_remaining; /* 0x110 */ 206 207 /* memory track count, configured by host */ 208 u32 hi_dynamic_mem_track_max; /* 0x114 */ 209 210 /* minidump buffer */ 211 u32 hi_minidump; /* 0x118 */ 212 213 /* bdata's sig and key addr */ 214 u32 hi_bd_sig_key; /* 0x11c */ 215 } __packed; 216 217 #define HI_ITEM(item) offsetof(struct host_interest, item) 218 219 /* Bits defined in hi_option_flag */ 220 221 /* Enable timer workaround */ 222 #define HI_OPTION_TIMER_WAR 0x01 223 /* Limit BMI command credits */ 224 #define HI_OPTION_BMI_CRED_LIMIT 0x02 225 /* Relay Dot11 hdr to/from host */ 226 #define HI_OPTION_RELAY_DOT11_HDR 0x04 227 /* MAC addr method 0-locally administred 1-globally unique addrs */ 228 #define HI_OPTION_MAC_ADDR_METHOD 0x08 229 /* Firmware Bridging */ 230 #define HI_OPTION_FW_BRIDGE 0x10 231 /* Enable CPU profiling */ 232 #define HI_OPTION_ENABLE_PROFILE 0x20 233 /* Disable debug logging */ 234 #define HI_OPTION_DISABLE_DBGLOG 0x40 235 /* Skip Era Tracking */ 236 #define HI_OPTION_SKIP_ERA_TRACKING 0x80 237 /* Disable PAPRD (debug) */ 238 #define HI_OPTION_PAPRD_DISABLE 0x100 239 #define HI_OPTION_NUM_DEV_LSB 0x200 240 #define HI_OPTION_NUM_DEV_MSB 0x800 241 #define HI_OPTION_DEV_MODE_LSB 0x1000 242 #define HI_OPTION_DEV_MODE_MSB 0x8000000 243 /* Disable LowFreq Timer Stabilization */ 244 #define HI_OPTION_NO_LFT_STBL 0x10000000 245 /* Skip regulatory scan */ 246 #define HI_OPTION_SKIP_REG_SCAN 0x20000000 247 /* 248 * Do regulatory scan during init before 249 * sending WMI ready event to host 250 */ 251 #define HI_OPTION_INIT_REG_SCAN 0x40000000 252 253 /* REV6: Do not adjust memory map */ 254 #define HI_OPTION_SKIP_MEMMAP 0x80000000 255 256 #define HI_OPTION_MAC_ADDR_METHOD_SHIFT 3 257 258 /* 2 bits of hi_option_flag are used to represent 3 modes */ 259 #define HI_OPTION_FW_MODE_IBSS 0x0 /* IBSS Mode */ 260 #define HI_OPTION_FW_MODE_BSS_STA 0x1 /* STA Mode */ 261 #define HI_OPTION_FW_MODE_AP 0x2 /* AP Mode */ 262 #define HI_OPTION_FW_MODE_BT30AMP 0x3 /* BT30 AMP Mode */ 263 264 /* 2 bits of hi_option flag are usedto represent 4 submodes */ 265 #define HI_OPTION_FW_SUBMODE_NONE 0x0 /* Normal mode */ 266 #define HI_OPTION_FW_SUBMODE_P2PDEV 0x1 /* p2p device mode */ 267 #define HI_OPTION_FW_SUBMODE_P2PCLIENT 0x2 /* p2p client mode */ 268 #define HI_OPTION_FW_SUBMODE_P2PGO 0x3 /* p2p go mode */ 269 270 /* Num dev Mask */ 271 #define HI_OPTION_NUM_DEV_MASK 0x7 272 #define HI_OPTION_NUM_DEV_SHIFT 0x9 273 274 /* firmware bridging */ 275 #define HI_OPTION_FW_BRIDGE_SHIFT 0x04 276 277 /* 278 * Fw Mode/SubMode Mask 279 *----------------------------------------------------------------------------- 280 * SUB | SUB | SUB | SUB | | | | 281 *MODE[3] | MODE[2] | MODE[1] | MODE[0] | MODE[3] | MODE[2] | MODE[1] | MODE[0] 282 * (2) | (2) | (2) | (2) | (2) | (2) | (2) | (2) 283 *----------------------------------------------------------------------------- 284 */ 285 #define HI_OPTION_FW_MODE_BITS 0x2 286 #define HI_OPTION_FW_MODE_MASK 0x3 287 #define HI_OPTION_FW_MODE_SHIFT 0xC 288 #define HI_OPTION_ALL_FW_MODE_MASK 0xFF 289 290 #define HI_OPTION_FW_SUBMODE_BITS 0x2 291 #define HI_OPTION_FW_SUBMODE_MASK 0x3 292 #define HI_OPTION_FW_SUBMODE_SHIFT 0x14 293 #define HI_OPTION_ALL_FW_SUBMODE_MASK 0xFF00 294 #define HI_OPTION_ALL_FW_SUBMODE_SHIFT 0x8 295 296 /* hi_option_flag2 options */ 297 #define HI_OPTION_OFFLOAD_AMSDU 0x01 298 #define HI_OPTION_DFS_SUPPORT 0x02 /* Enable DFS support */ 299 #define HI_OPTION_ENABLE_RFKILL 0x04 /* RFKill Enable Feature*/ 300 #define HI_OPTION_RADIO_RETENTION_DISABLE 0x08 /* Disable radio retention */ 301 #define HI_OPTION_EARLY_CFG_DONE 0x10 /* Early configuration is complete */ 302 303 #define HI_OPTION_RF_KILL_SHIFT 0x2 304 #define HI_OPTION_RF_KILL_MASK 0x1 305 306 /* hi_reset_flag */ 307 /* preserve App Start address */ 308 #define HI_RESET_FLAG_PRESERVE_APP_START 0x01 309 /* preserve host interest */ 310 #define HI_RESET_FLAG_PRESERVE_HOST_INTEREST 0x02 311 /* preserve ROM data */ 312 #define HI_RESET_FLAG_PRESERVE_ROMDATA 0x04 313 #define HI_RESET_FLAG_PRESERVE_NVRAM_STATE 0x08 314 #define HI_RESET_FLAG_PRESERVE_BOOT_INFO 0x10 315 #define HI_RESET_FLAG_WARM_RESET 0x20 316 317 /* define hi_fw_swap bits */ 318 #define HI_DESC_IN_FW_BIT 0x01 319 320 /* indicate the reset flag is valid */ 321 #define HI_RESET_FLAG_IS_VALID 0x12345678 322 323 /* ACS is enabled */ 324 #define HI_ACS_FLAGS_ENABLED (1 << 0) 325 /* Use physical WWAN device */ 326 #define HI_ACS_FLAGS_USE_WWAN (1 << 1) 327 /* Use test VAP */ 328 #define HI_ACS_FLAGS_TEST_VAP (1 << 2) 329 /* SDIO/mailbox ACS flag definitions */ 330 #define HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET (1 << 0) 331 #define HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET (1 << 1) 332 #define HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE (1 << 2) 333 #define HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_FW_ACK (1 << 16) 334 #define HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_FW_ACK (1 << 17) 335 336 /* 337 * CONSOLE FLAGS 338 * 339 * Bit Range Meaning 340 * --------- -------------------------------- 341 * 2..0 UART ID (0 = Default) 342 * 3 Baud Select (0 = 9600, 1 = 115200) 343 * 30..4 Reserved 344 * 31 Enable Console 345 * 346 */ 347 348 #define HI_CONSOLE_FLAGS_ENABLE (1 << 31) 349 #define HI_CONSOLE_FLAGS_UART_MASK (0x7) 350 #define HI_CONSOLE_FLAGS_UART_SHIFT 0 351 #define HI_CONSOLE_FLAGS_BAUD_SELECT (1 << 3) 352 353 /* SM power save options */ 354 #define HI_SMPS_ALLOW_MASK (0x00000001) 355 #define HI_SMPS_MODE_MASK (0x00000002) 356 #define HI_SMPS_MODE_STATIC (0x00000000) 357 #define HI_SMPS_MODE_DYNAMIC (0x00000002) 358 #define HI_SMPS_DISABLE_AUTO_MODE (0x00000004) 359 #define HI_SMPS_DATA_THRESH_MASK (0x000007f8) 360 #define HI_SMPS_DATA_THRESH_SHIFT (3) 361 #define HI_SMPS_RSSI_THRESH_MASK (0x0007f800) 362 #define HI_SMPS_RSSI_THRESH_SHIFT (11) 363 #define HI_SMPS_LOWPWR_CM_MASK (0x00380000) 364 #define HI_SMPS_LOWPWR_CM_SHIFT (15) 365 #define HI_SMPS_HIPWR_CM_MASK (0x03c00000) 366 #define HI_SMPS_HIPWR_CM_SHIFT (19) 367 368 /* 369 * WOW Extension configuration 370 * 371 * Bit Range Meaning 372 * --------- -------------------------------- 373 * 8..0 Size of each WOW pattern (max 511) 374 * 15..9 Number of patterns per list (max 127) 375 * 17..16 Number of lists (max 4) 376 * 30..18 Reserved 377 * 31 Enabled 378 * 379 * set values (except enable) to zeros for default settings 380 */ 381 382 #define HI_WOW_EXT_ENABLED_MASK (1 << 31) 383 #define HI_WOW_EXT_NUM_LIST_SHIFT 16 384 #define HI_WOW_EXT_NUM_LIST_MASK (0x3 << HI_WOW_EXT_NUM_LIST_SHIFT) 385 #define HI_WOW_EXT_NUM_PATTERNS_SHIFT 9 386 #define HI_WOW_EXT_NUM_PATTERNS_MASK (0x7F << HI_WOW_EXT_NUM_PATTERNS_SHIFT) 387 #define HI_WOW_EXT_PATTERN_SIZE_SHIFT 0 388 #define HI_WOW_EXT_PATTERN_SIZE_MASK (0x1FF << HI_WOW_EXT_PATTERN_SIZE_SHIFT) 389 390 #define HI_WOW_EXT_MAKE_CONFIG(num_lists, count, size) \ 391 ((((num_lists) << HI_WOW_EXT_NUM_LIST_SHIFT) & \ 392 HI_WOW_EXT_NUM_LIST_MASK) | \ 393 (((count) << HI_WOW_EXT_NUM_PATTERNS_SHIFT) & \ 394 HI_WOW_EXT_NUM_PATTERNS_MASK) | \ 395 (((size) << HI_WOW_EXT_PATTERN_SIZE_SHIFT) & \ 396 HI_WOW_EXT_PATTERN_SIZE_MASK)) 397 398 #define HI_WOW_EXT_GET_NUM_LISTS(config) \ 399 (((config) & HI_WOW_EXT_NUM_LIST_MASK) >> HI_WOW_EXT_NUM_LIST_SHIFT) 400 #define HI_WOW_EXT_GET_NUM_PATTERNS(config) \ 401 (((config) & HI_WOW_EXT_NUM_PATTERNS_MASK) >> \ 402 HI_WOW_EXT_NUM_PATTERNS_SHIFT) 403 #define HI_WOW_EXT_GET_PATTERN_SIZE(config) \ 404 (((config) & HI_WOW_EXT_PATTERN_SIZE_MASK) >> \ 405 HI_WOW_EXT_PATTERN_SIZE_SHIFT) 406 407 /* 408 * Early allocation configuration 409 * Support RAM bank configuration before BMI done and this eases the memory 410 * allocation at very early stage 411 * Bit Range Meaning 412 * --------- ---------------------------------- 413 * [0:3] number of bank assigned to be IRAM 414 * [4:15] reserved 415 * [16:31] magic number 416 * 417 * Note: 418 * 1. target firmware would check magic number and if it's a match, firmware 419 * would consider the bits[0:15] are valid and base on that to calculate 420 * the end of DRAM. Early allocation would be located at that area and 421 * may be reclaimed when necessary 422 * 2. if no magic number is found, early allocation would happen at "_end" 423 * symbol of ROM which is located before the app-data and might NOT be 424 * re-claimable. If this is adopted, link script should keep this in 425 * mind to avoid data corruption. 426 */ 427 #define HI_EARLY_ALLOC_MAGIC 0x6d8a 428 #define HI_EARLY_ALLOC_MAGIC_MASK 0xffff0000 429 #define HI_EARLY_ALLOC_MAGIC_SHIFT 16 430 #define HI_EARLY_ALLOC_IRAM_BANKS_MASK 0x0000000f 431 #define HI_EARLY_ALLOC_IRAM_BANKS_SHIFT 0 432 433 #define HI_EARLY_ALLOC_VALID() \ 434 ((((HOST_INTEREST->hi_early_alloc) & HI_EARLY_ALLOC_MAGIC_MASK) >> \ 435 HI_EARLY_ALLOC_MAGIC_SHIFT) == (HI_EARLY_ALLOC_MAGIC)) 436 #define HI_EARLY_ALLOC_GET_IRAM_BANKS() \ 437 (((HOST_INTEREST->hi_early_alloc) & HI_EARLY_ALLOC_IRAM_BANKS_MASK) \ 438 >> HI_EARLY_ALLOC_IRAM_BANKS_SHIFT) 439 440 /*power save flag bit definitions*/ 441 #define HI_PWR_SAVE_LPL_ENABLED 0x1 442 /*b1-b3 reserved*/ 443 /*b4-b5 : dev0 LPL type : 0 - none 444 * 1- Reduce Pwr Search 445 * 2- Reduce Pwr Listen 446 */ 447 /*b6-b7 : dev1 LPL type and so on for Max 8 devices*/ 448 #define HI_PWR_SAVE_LPL_DEV0_LSB 4 449 #define HI_PWR_SAVE_LPL_DEV_MASK 0x3 450 /*power save related utility macros*/ 451 #define HI_LPL_ENABLED() \ 452 ((HOST_INTEREST->hi_pwr_save_flags & HI_PWR_SAVE_LPL_ENABLED)) 453 #define HI_DEV_LPL_TYPE_GET(_devix) \ 454 (HOST_INTEREST->hi_pwr_save_flags & ((HI_PWR_SAVE_LPL_DEV_MASK) << \ 455 (HI_PWR_SAVE_LPL_DEV0_LSB + (_devix) * 2))) 456 457 #define HOST_INTEREST_SMPS_IS_ALLOWED() \ 458 ((HOST_INTEREST->hi_smps_options & HI_SMPS_ALLOW_MASK)) 459 460 /* Reserve 1024 bytes for extended board data */ 461 #define QCA988X_BOARD_DATA_SZ 7168 462 #define QCA988X_BOARD_EXT_DATA_SZ 0 463 464 #define QCA9887_BOARD_DATA_SZ 7168 465 #define QCA9887_BOARD_EXT_DATA_SZ 0 466 467 #define QCA6174_BOARD_DATA_SZ 8192 468 #define QCA6174_BOARD_EXT_DATA_SZ 0 469 470 #define QCA9377_BOARD_DATA_SZ QCA6174_BOARD_DATA_SZ 471 #define QCA9377_BOARD_EXT_DATA_SZ 0 472 473 #define QCA99X0_BOARD_DATA_SZ 12288 474 #define QCA99X0_BOARD_EXT_DATA_SZ 0 475 476 /* Dual band extended board data */ 477 #define QCA99X0_EXT_BOARD_DATA_SZ 2048 478 #define EXT_BOARD_ADDRESS_OFFSET 0x3000 479 480 #define QCA4019_BOARD_DATA_SZ 12064 481 #define QCA4019_BOARD_EXT_DATA_SZ 0 482 483 #endif /* __TARGADDRS_H__ */ 484