1 /* SPDX-License-Identifier: ISC */ 2 /* 3 * Copyright (c) 2004-2011 Atheros Communications Inc. 4 * Copyright (c) 2011-2012 Qualcomm Atheros, Inc. 5 * Copyright (c) 2016-2017 Erik Stromdahl <erik.stromdahl@gmail.com> 6 */ 7 8 #ifndef _SDIO_H_ 9 #define _SDIO_H_ 10 11 #define ATH10K_HIF_MBOX_BLOCK_SIZE 256 12 13 #define QCA_MANUFACTURER_ID_BASE GENMASK(11, 8) 14 #define QCA_MANUFACTURER_ID_AR6005_BASE 0x5 15 #define QCA_MANUFACTURER_ID_QCA9377_BASE 0x7 16 #define QCA_SDIO_ID_AR6005_BASE 0x500 17 #define QCA_SDIO_ID_QCA9377_BASE 0x700 18 #define QCA_MANUFACTURER_ID_REV_MASK 0x00FF 19 #define QCA_MANUFACTURER_CODE 0x271 /* Qualcomm/Atheros */ 20 21 #define ATH10K_SDIO_MAX_BUFFER_SIZE 4096 /*Unsure of this constant*/ 22 23 /* Mailbox address in SDIO address space */ 24 #define ATH10K_HIF_MBOX_BASE_ADDR 0x1000 25 #define ATH10K_HIF_MBOX_WIDTH 0x800 26 27 #define ATH10K_HIF_MBOX_TOT_WIDTH \ 28 (ATH10K_HIF_MBOX_NUM_MAX * ATH10K_HIF_MBOX_WIDTH) 29 30 #define ATH10K_HIF_MBOX0_EXT_BASE_ADDR 0x5000 31 #define ATH10K_HIF_MBOX0_EXT_WIDTH (36 * 1024) 32 #define ATH10K_HIF_MBOX0_EXT_WIDTH_ROME_2_0 (56 * 1024) 33 #define ATH10K_HIF_MBOX1_EXT_WIDTH (36 * 1024) 34 #define ATH10K_HIF_MBOX_DUMMY_SPACE_SIZE (2 * 1024) 35 36 #define ATH10K_HTC_MBOX_MAX_PAYLOAD_LENGTH \ 37 (ATH10K_SDIO_MAX_BUFFER_SIZE - sizeof(struct ath10k_htc_hdr)) 38 39 #define ATH10K_HIF_MBOX_NUM_MAX 4 40 #define ATH10K_SDIO_BUS_REQUEST_MAX_NUM 64 41 42 #define ATH10K_SDIO_HIF_COMMUNICATION_TIMEOUT_HZ (100 * HZ) 43 44 /* HTC runs over mailbox 0 */ 45 #define ATH10K_HTC_MAILBOX 0 46 #define ATH10K_HTC_MAILBOX_MASK BIT(ATH10K_HTC_MAILBOX) 47 48 /* GMBOX addresses */ 49 #define ATH10K_HIF_GMBOX_BASE_ADDR 0x7000 50 #define ATH10K_HIF_GMBOX_WIDTH 0x4000 51 52 /* Modified versions of the sdio.h macros. 53 * The macros in sdio.h can't be used easily with the FIELD_{PREP|GET} 54 * macros in bitfield.h, so we define our own macros here. 55 */ 56 #define ATH10K_SDIO_DRIVE_DTSX_MASK \ 57 (SDIO_DRIVE_DTSx_MASK << SDIO_DRIVE_DTSx_SHIFT) 58 59 #define ATH10K_SDIO_DRIVE_DTSX_TYPE_B 0 60 #define ATH10K_SDIO_DRIVE_DTSX_TYPE_A 1 61 #define ATH10K_SDIO_DRIVE_DTSX_TYPE_C 2 62 #define ATH10K_SDIO_DRIVE_DTSX_TYPE_D 3 63 64 /* SDIO CCCR register definitions */ 65 #define CCCR_SDIO_IRQ_MODE_REG 0xF0 66 #define CCCR_SDIO_IRQ_MODE_REG_SDIO3 0x16 67 68 #define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_ADDR 0xF2 69 70 #define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_A 0x02 71 #define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_C 0x04 72 #define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_D 0x08 73 74 #define CCCR_SDIO_ASYNC_INT_DELAY_ADDRESS 0xF0 75 #define CCCR_SDIO_ASYNC_INT_DELAY_MASK 0xC0 76 77 /* mode to enable special 4-bit interrupt assertion without clock */ 78 #define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ BIT(0) 79 #define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ_SDIO3 BIT(1) 80 81 #define ATH10K_SDIO_TARGET_DEBUG_INTR_MASK 0x01 82 83 /* The theoretical maximum number of RX messages that can be fetched 84 * from the mbox interrupt handler in one loop is derived in the following 85 * way: 86 * 87 * Let's assume that each packet in a bundle of the maximum bundle size 88 * (HTC_HOST_MAX_MSG_PER_RX_BUNDLE) has the HTC header bundle count set 89 * to the maximum value (HTC_HOST_MAX_MSG_PER_RX_BUNDLE). 90 * 91 * in this case the driver must allocate 92 * (HTC_HOST_MAX_MSG_PER_RX_BUNDLE * HTC_HOST_MAX_MSG_PER_RX_BUNDLE) skb's. 93 */ 94 #define ATH10K_SDIO_MAX_RX_MSGS \ 95 (HTC_HOST_MAX_MSG_PER_RX_BUNDLE * HTC_HOST_MAX_MSG_PER_RX_BUNDLE) 96 97 #define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL 0x00000868u 98 #define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_OFF 0xFFFEFFFF 99 #define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_ON 0x10000 100 101 struct ath10k_sdio_bus_request { 102 struct list_head list; 103 104 /* sdio address */ 105 u32 address; 106 107 struct sk_buff *skb; 108 enum ath10k_htc_ep_id eid; 109 int status; 110 /* Specifies if the current request is an HTC message. 111 * If not, the eid is not applicable an the TX completion handler 112 * associated with the endpoint will not be invoked. 113 */ 114 bool htc_msg; 115 /* Completion that (if set) will be invoked for non HTC requests 116 * (htc_msg == false) when the request has been processed. 117 */ 118 struct completion *comp; 119 }; 120 121 struct ath10k_sdio_rx_data { 122 struct sk_buff *skb; 123 size_t alloc_len; 124 size_t act_len; 125 enum ath10k_htc_ep_id eid; 126 bool part_of_bundle; 127 bool last_in_bundle; 128 bool trailer_only; 129 int status; 130 }; 131 132 struct ath10k_sdio_irq_proc_regs { 133 u8 host_int_status; 134 u8 cpu_int_status; 135 u8 error_int_status; 136 u8 counter_int_status; 137 u8 mbox_frame; 138 u8 rx_lookahead_valid; 139 u8 host_int_status2; 140 u8 gmbox_rx_avail; 141 __le32 rx_lookahead[2]; 142 __le32 rx_gmbox_lookahead_alias[2]; 143 }; 144 145 struct ath10k_sdio_irq_enable_regs { 146 u8 int_status_en; 147 u8 cpu_int_status_en; 148 u8 err_int_status_en; 149 u8 cntr_int_status_en; 150 }; 151 152 struct ath10k_sdio_irq_data { 153 /* protects irq_proc_reg and irq_en_reg below. 154 * We use a mutex here and not a spinlock since we will have the 155 * mutex locked while calling the sdio_memcpy_ functions. 156 * These function require non atomic context, and hence, spinlocks 157 * can be held while calling these functions. 158 */ 159 struct mutex mtx; 160 struct ath10k_sdio_irq_proc_regs *irq_proc_reg; 161 struct ath10k_sdio_irq_enable_regs *irq_en_reg; 162 }; 163 164 struct ath10k_mbox_ext_info { 165 u32 htc_ext_addr; 166 u32 htc_ext_sz; 167 }; 168 169 struct ath10k_mbox_info { 170 u32 htc_addr; 171 struct ath10k_mbox_ext_info ext_info[2]; 172 u32 block_size; 173 u32 block_mask; 174 u32 gmbox_addr; 175 u32 gmbox_sz; 176 }; 177 178 struct ath10k_sdio { 179 struct sdio_func *func; 180 181 struct ath10k_mbox_info mbox_info; 182 bool swap_mbox; 183 u32 mbox_addr[ATH10K_HTC_EP_COUNT]; 184 u32 mbox_size[ATH10K_HTC_EP_COUNT]; 185 186 /* available bus requests */ 187 struct ath10k_sdio_bus_request bus_req[ATH10K_SDIO_BUS_REQUEST_MAX_NUM]; 188 /* free list of bus requests */ 189 struct list_head bus_req_freeq; 190 /* protects access to bus_req_freeq */ 191 spinlock_t lock; 192 193 struct ath10k_sdio_rx_data rx_pkts[ATH10K_SDIO_MAX_RX_MSGS]; 194 size_t n_rx_pkts; 195 196 struct ath10k *ar; 197 struct ath10k_sdio_irq_data irq_data; 198 199 /* temporary buffer for BMI requests */ 200 u8 *bmi_buf; 201 202 bool is_disabled; 203 204 struct workqueue_struct *workqueue; 205 struct work_struct wr_async_work; 206 struct list_head wr_asyncq; 207 /* protects access to wr_asyncq */ 208 spinlock_t wr_async_lock; 209 }; 210 211 static inline struct ath10k_sdio *ath10k_sdio_priv(struct ath10k *ar) 212 { 213 return (struct ath10k_sdio *)ar->drv_priv; 214 } 215 216 #endif 217