xref: /openbmc/linux/drivers/net/wireless/ath/ath10k/pci.h (revision a2818ee4)
1 /*
2  * Copyright (c) 2005-2011 Atheros Communications Inc.
3  * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
4  *
5  * Permission to use, copy, modify, and/or distribute this software for any
6  * purpose with or without fee is hereby granted, provided that the above
7  * copyright notice and this permission notice appear in all copies.
8  *
9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16  */
17 
18 #ifndef _PCI_H_
19 #define _PCI_H_
20 
21 #include <linux/interrupt.h>
22 
23 #include "hw.h"
24 #include "ce.h"
25 #include "ahb.h"
26 
27 /*
28  * maximum number of bytes that can be
29  * handled atomically by DiagRead/DiagWrite
30  */
31 #define DIAG_TRANSFER_LIMIT 2048
32 
33 struct bmi_xfer {
34 	bool tx_done;
35 	bool rx_done;
36 	bool wait_for_resp;
37 	u32 resp_len;
38 };
39 
40 /*
41  * PCI-specific Target state
42  *
43  * NOTE: Structure is shared between Host software and Target firmware!
44  *
45  * Much of this may be of interest to the Host so
46  * HOST_INTEREST->hi_interconnect_state points here
47  * (and all members are 32-bit quantities in order to
48  * facilitate Host access). In particular, Host software is
49  * required to initialize pipe_cfg_addr and svc_to_pipe_map.
50  */
51 struct pcie_state {
52 	/* Pipe configuration Target address */
53 	/* NB: ce_pipe_config[CE_COUNT] */
54 	u32 pipe_cfg_addr;
55 
56 	/* Service to pipe map Target address */
57 	/* NB: service_to_pipe[PIPE_TO_CE_MAP_CN] */
58 	u32 svc_to_pipe_map;
59 
60 	/* number of MSI interrupts requested */
61 	u32 msi_requested;
62 
63 	/* number of MSI interrupts granted */
64 	u32 msi_granted;
65 
66 	/* Message Signalled Interrupt address */
67 	u32 msi_addr;
68 
69 	/* Base data */
70 	u32 msi_data;
71 
72 	/*
73 	 * Data for firmware interrupt;
74 	 * MSI data for other interrupts are
75 	 * in various SoC registers
76 	 */
77 	u32 msi_fw_intr_data;
78 
79 	/* PCIE_PWR_METHOD_* */
80 	u32 power_mgmt_method;
81 
82 	/* PCIE_CONFIG_FLAG_* */
83 	u32 config_flags;
84 };
85 
86 /* PCIE_CONFIG_FLAG definitions */
87 #define PCIE_CONFIG_FLAG_ENABLE_L1  0x0000001
88 
89 /* Per-pipe state. */
90 struct ath10k_pci_pipe {
91 	/* Handle of underlying Copy Engine */
92 	struct ath10k_ce_pipe *ce_hdl;
93 
94 	/* Our pipe number; facilitiates use of pipe_info ptrs. */
95 	u8 pipe_num;
96 
97 	/* Convenience back pointer to hif_ce_state. */
98 	struct ath10k *hif_ce_state;
99 
100 	size_t buf_sz;
101 
102 	/* protects compl_free and num_send_allowed */
103 	spinlock_t pipe_lock;
104 };
105 
106 struct ath10k_pci_supp_chip {
107 	u32 dev_id;
108 	u32 rev_id;
109 };
110 
111 enum ath10k_pci_irq_mode {
112 	ATH10K_PCI_IRQ_AUTO = 0,
113 	ATH10K_PCI_IRQ_LEGACY = 1,
114 	ATH10K_PCI_IRQ_MSI = 2,
115 };
116 
117 struct ath10k_pci {
118 	struct pci_dev *pdev;
119 	struct device *dev;
120 	struct ath10k *ar;
121 	void __iomem *mem;
122 	size_t mem_len;
123 
124 	/* Operating interrupt mode */
125 	enum ath10k_pci_irq_mode oper_irq_mode;
126 
127 	struct ath10k_pci_pipe pipe_info[CE_COUNT_MAX];
128 
129 	/* Copy Engine used for Diagnostic Accesses */
130 	struct ath10k_ce_pipe *ce_diag;
131 
132 	struct ath10k_ce ce;
133 	struct timer_list rx_post_retry;
134 
135 	/* Due to HW quirks it is recommended to disable ASPM during device
136 	 * bootup. To do that the original PCI-E Link Control is stored before
137 	 * device bootup is executed and re-programmed later.
138 	 */
139 	u16 link_ctl;
140 
141 	/* Protects ps_awake and ps_wake_refcount */
142 	spinlock_t ps_lock;
143 
144 	/* The device has a special powersave-oriented register. When device is
145 	 * considered asleep it drains less power and driver is forbidden from
146 	 * accessing most MMIO registers. If host were to access them without
147 	 * waking up the device might scribble over host memory or return
148 	 * 0xdeadbeef readouts.
149 	 */
150 	unsigned long ps_wake_refcount;
151 
152 	/* Waking up takes some time (up to 2ms in some cases) so it can be bad
153 	 * for latency. To mitigate this the device isn't immediately allowed
154 	 * to sleep after all references are undone - instead there's a grace
155 	 * period after which the powersave register is updated unless some
156 	 * activity to/from device happened in the meantime.
157 	 *
158 	 * Also see comments on ATH10K_PCI_SLEEP_GRACE_PERIOD_MSEC.
159 	 */
160 	struct timer_list ps_timer;
161 
162 	/* MMIO registers are used to communicate with the device. With
163 	 * intensive traffic accessing powersave register would be a bit
164 	 * wasteful overhead and would needlessly stall CPU. It is far more
165 	 * efficient to rely on a variable in RAM and update it only upon
166 	 * powersave register state changes.
167 	 */
168 	bool ps_awake;
169 
170 	/* pci power save, disable for QCA988X and QCA99X0.
171 	 * Writing 'false' to this variable avoids frequent locking
172 	 * on MMIO read/write.
173 	 */
174 	bool pci_ps;
175 
176 	/* Chip specific pci reset routine used to do a safe reset */
177 	int (*pci_soft_reset)(struct ath10k *ar);
178 
179 	/* Chip specific pci full reset function */
180 	int (*pci_hard_reset)(struct ath10k *ar);
181 
182 	/* chip specific methods for converting target CPU virtual address
183 	 * space to CE address space
184 	 */
185 	u32 (*targ_cpu_to_ce_addr)(struct ath10k *ar, u32 addr);
186 
187 	/* Keep this entry in the last, memory for struct ath10k_ahb is
188 	 * allocated (ahb support enabled case) in the continuation of
189 	 * this struct.
190 	 */
191 	struct ath10k_ahb ahb[0];
192 };
193 
194 static inline struct ath10k_pci *ath10k_pci_priv(struct ath10k *ar)
195 {
196 	return (struct ath10k_pci *)ar->drv_priv;
197 }
198 
199 #define ATH10K_PCI_RX_POST_RETRY_MS 50
200 #define ATH_PCI_RESET_WAIT_MAX 10 /* ms */
201 #define PCIE_WAKE_TIMEOUT 30000	/* 30ms */
202 #define PCIE_WAKE_LATE_US 10000	/* 10ms */
203 
204 #define BAR_NUM 0
205 
206 #define CDC_WAR_MAGIC_STR   0xceef0000
207 #define CDC_WAR_DATA_CE     4
208 
209 /* Wait up to this many Ms for a Diagnostic Access CE operation to complete */
210 #define DIAG_ACCESS_CE_TIMEOUT_US 10000 /* 10 ms */
211 #define DIAG_ACCESS_CE_WAIT_US	50
212 
213 void ath10k_pci_write32(struct ath10k *ar, u32 offset, u32 value);
214 void ath10k_pci_soc_write32(struct ath10k *ar, u32 addr, u32 val);
215 void ath10k_pci_reg_write32(struct ath10k *ar, u32 addr, u32 val);
216 
217 u32 ath10k_pci_read32(struct ath10k *ar, u32 offset);
218 u32 ath10k_pci_soc_read32(struct ath10k *ar, u32 addr);
219 u32 ath10k_pci_reg_read32(struct ath10k *ar, u32 addr);
220 
221 int ath10k_pci_hif_tx_sg(struct ath10k *ar, u8 pipe_id,
222 			 struct ath10k_hif_sg_item *items, int n_items);
223 int ath10k_pci_hif_diag_read(struct ath10k *ar, u32 address, void *buf,
224 			     size_t buf_len);
225 int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
226 			      const void *data, int nbytes);
227 int ath10k_pci_hif_exchange_bmi_msg(struct ath10k *ar, void *req, u32 req_len,
228 				    void *resp, u32 *resp_len);
229 int ath10k_pci_hif_map_service_to_pipe(struct ath10k *ar, u16 service_id,
230 				       u8 *ul_pipe, u8 *dl_pipe);
231 void ath10k_pci_hif_get_default_pipe(struct ath10k *ar, u8 *ul_pipe,
232 				     u8 *dl_pipe);
233 void ath10k_pci_hif_send_complete_check(struct ath10k *ar, u8 pipe,
234 					int force);
235 u16 ath10k_pci_hif_get_free_queue_number(struct ath10k *ar, u8 pipe);
236 void ath10k_pci_hif_power_down(struct ath10k *ar);
237 int ath10k_pci_alloc_pipes(struct ath10k *ar);
238 void ath10k_pci_free_pipes(struct ath10k *ar);
239 void ath10k_pci_free_pipes(struct ath10k *ar);
240 void ath10k_pci_rx_replenish_retry(struct timer_list *t);
241 void ath10k_pci_ce_deinit(struct ath10k *ar);
242 void ath10k_pci_init_napi(struct ath10k *ar);
243 int ath10k_pci_init_pipes(struct ath10k *ar);
244 int ath10k_pci_init_config(struct ath10k *ar);
245 void ath10k_pci_rx_post(struct ath10k *ar);
246 void ath10k_pci_flush(struct ath10k *ar);
247 void ath10k_pci_enable_legacy_irq(struct ath10k *ar);
248 bool ath10k_pci_irq_pending(struct ath10k *ar);
249 void ath10k_pci_disable_and_clear_legacy_irq(struct ath10k *ar);
250 void ath10k_pci_irq_msi_fw_mask(struct ath10k *ar);
251 int ath10k_pci_wait_for_target_init(struct ath10k *ar);
252 int ath10k_pci_setup_resource(struct ath10k *ar);
253 void ath10k_pci_release_resource(struct ath10k *ar);
254 
255 /* QCA6174 is known to have Tx/Rx issues when SOC_WAKE register is poked too
256  * frequently. To avoid this put SoC to sleep after a very conservative grace
257  * period. Adjust with great care.
258  */
259 #define ATH10K_PCI_SLEEP_GRACE_PERIOD_MSEC 60
260 
261 #endif /* _PCI_H_ */
262