1 /* 2 * Copyright (c) 2005-2011 Atheros Communications Inc. 3 * Copyright (c) 2011-2013 Qualcomm Atheros, Inc. 4 * 5 * Permission to use, copy, modify, and/or distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 */ 17 18 #ifndef _CORE_H_ 19 #define _CORE_H_ 20 21 #include <linux/completion.h> 22 #include <linux/if_ether.h> 23 #include <linux/types.h> 24 #include <linux/pci.h> 25 #include <linux/uuid.h> 26 #include <linux/time.h> 27 28 #include "htt.h" 29 #include "htc.h" 30 #include "hw.h" 31 #include "targaddrs.h" 32 #include "wmi.h" 33 #include "../ath.h" 34 #include "../regd.h" 35 #include "../dfs_pattern_detector.h" 36 #include "spectral.h" 37 #include "thermal.h" 38 #include "wow.h" 39 #include "swap.h" 40 41 #define MS(_v, _f) (((_v) & _f##_MASK) >> _f##_LSB) 42 #define SM(_v, _f) (((_v) << _f##_LSB) & _f##_MASK) 43 #define WO(_f) ((_f##_OFFSET) >> 2) 44 45 #define ATH10K_SCAN_ID 0 46 #define WMI_READY_TIMEOUT (5 * HZ) 47 #define ATH10K_FLUSH_TIMEOUT_HZ (5 * HZ) 48 #define ATH10K_CONNECTION_LOSS_HZ (3 * HZ) 49 #define ATH10K_NUM_CHANS 40 50 51 /* Antenna noise floor */ 52 #define ATH10K_DEFAULT_NOISE_FLOOR -95 53 54 #define ATH10K_MAX_NUM_MGMT_PENDING 128 55 56 /* number of failed packets (20 packets with 16 sw reties each) */ 57 #define ATH10K_KICKOUT_THRESHOLD (20 * 16) 58 59 /* 60 * Use insanely high numbers to make sure that the firmware implementation 61 * won't start, we have the same functionality already in hostapd. Unit 62 * is seconds. 63 */ 64 #define ATH10K_KEEPALIVE_MIN_IDLE 3747 65 #define ATH10K_KEEPALIVE_MAX_IDLE 3895 66 #define ATH10K_KEEPALIVE_MAX_UNRESPONSIVE 3900 67 68 /* NAPI poll budget */ 69 #define ATH10K_NAPI_BUDGET 64 70 #define ATH10K_NAPI_QUOTA_LIMIT 60 71 72 /* SMBIOS type containing Board Data File Name Extension */ 73 #define ATH10K_SMBIOS_BDF_EXT_TYPE 0xF8 74 75 /* SMBIOS type structure length (excluding strings-set) */ 76 #define ATH10K_SMBIOS_BDF_EXT_LENGTH 0x9 77 78 /* Offset pointing to Board Data File Name Extension */ 79 #define ATH10K_SMBIOS_BDF_EXT_OFFSET 0x8 80 81 /* Board Data File Name Extension string length. 82 * String format: BDF_<Customer ID>_<Extension>\0 83 */ 84 #define ATH10K_SMBIOS_BDF_EXT_STR_LENGTH 0x20 85 86 /* The magic used by QCA spec */ 87 #define ATH10K_SMBIOS_BDF_EXT_MAGIC "BDF_" 88 89 struct ath10k; 90 91 enum ath10k_bus { 92 ATH10K_BUS_PCI, 93 ATH10K_BUS_AHB, 94 }; 95 96 static inline const char *ath10k_bus_str(enum ath10k_bus bus) 97 { 98 switch (bus) { 99 case ATH10K_BUS_PCI: 100 return "pci"; 101 case ATH10K_BUS_AHB: 102 return "ahb"; 103 } 104 105 return "unknown"; 106 } 107 108 enum ath10k_skb_flags { 109 ATH10K_SKB_F_NO_HWCRYPT = BIT(0), 110 ATH10K_SKB_F_DTIM_ZERO = BIT(1), 111 ATH10K_SKB_F_DELIVER_CAB = BIT(2), 112 ATH10K_SKB_F_MGMT = BIT(3), 113 ATH10K_SKB_F_QOS = BIT(4), 114 }; 115 116 struct ath10k_skb_cb { 117 dma_addr_t paddr; 118 u8 flags; 119 u8 eid; 120 u16 msdu_id; 121 struct ieee80211_vif *vif; 122 struct ieee80211_txq *txq; 123 } __packed; 124 125 struct ath10k_skb_rxcb { 126 dma_addr_t paddr; 127 struct hlist_node hlist; 128 }; 129 130 static inline struct ath10k_skb_cb *ATH10K_SKB_CB(struct sk_buff *skb) 131 { 132 BUILD_BUG_ON(sizeof(struct ath10k_skb_cb) > 133 IEEE80211_TX_INFO_DRIVER_DATA_SIZE); 134 return (struct ath10k_skb_cb *)&IEEE80211_SKB_CB(skb)->driver_data; 135 } 136 137 static inline struct ath10k_skb_rxcb *ATH10K_SKB_RXCB(struct sk_buff *skb) 138 { 139 BUILD_BUG_ON(sizeof(struct ath10k_skb_rxcb) > sizeof(skb->cb)); 140 return (struct ath10k_skb_rxcb *)skb->cb; 141 } 142 143 #define ATH10K_RXCB_SKB(rxcb) \ 144 container_of((void *)rxcb, struct sk_buff, cb) 145 146 static inline u32 host_interest_item_address(u32 item_offset) 147 { 148 return QCA988X_HOST_INTEREST_ADDRESS + item_offset; 149 } 150 151 struct ath10k_bmi { 152 bool done_sent; 153 }; 154 155 struct ath10k_mem_chunk { 156 void *vaddr; 157 dma_addr_t paddr; 158 u32 len; 159 u32 req_id; 160 }; 161 162 struct ath10k_wmi { 163 enum ath10k_htc_ep_id eid; 164 struct completion service_ready; 165 struct completion unified_ready; 166 struct completion barrier; 167 wait_queue_head_t tx_credits_wq; 168 DECLARE_BITMAP(svc_map, WMI_SERVICE_MAX); 169 struct wmi_cmd_map *cmd; 170 struct wmi_vdev_param_map *vdev_param; 171 struct wmi_pdev_param_map *pdev_param; 172 const struct wmi_ops *ops; 173 const struct wmi_peer_flags_map *peer_flags; 174 175 u32 num_mem_chunks; 176 u32 rx_decap_mode; 177 struct ath10k_mem_chunk mem_chunks[WMI_MAX_MEM_REQS]; 178 }; 179 180 struct ath10k_fw_stats_peer { 181 struct list_head list; 182 183 u8 peer_macaddr[ETH_ALEN]; 184 u32 peer_rssi; 185 u32 peer_tx_rate; 186 u32 peer_rx_rate; /* 10x only */ 187 u32 rx_duration; 188 }; 189 190 struct ath10k_fw_extd_stats_peer { 191 struct list_head list; 192 193 u8 peer_macaddr[ETH_ALEN]; 194 u32 rx_duration; 195 }; 196 197 struct ath10k_fw_stats_vdev { 198 struct list_head list; 199 200 u32 vdev_id; 201 u32 beacon_snr; 202 u32 data_snr; 203 u32 num_tx_frames[4]; 204 u32 num_rx_frames; 205 u32 num_tx_frames_retries[4]; 206 u32 num_tx_frames_failures[4]; 207 u32 num_rts_fail; 208 u32 num_rts_success; 209 u32 num_rx_err; 210 u32 num_rx_discard; 211 u32 num_tx_not_acked; 212 u32 tx_rate_history[10]; 213 u32 beacon_rssi_history[10]; 214 }; 215 216 struct ath10k_fw_stats_pdev { 217 struct list_head list; 218 219 /* PDEV stats */ 220 s32 ch_noise_floor; 221 u32 tx_frame_count; /* Cycles spent transmitting frames */ 222 u32 rx_frame_count; /* Cycles spent receiving frames */ 223 u32 rx_clear_count; /* Total channel busy time, evidently */ 224 u32 cycle_count; /* Total on-channel time */ 225 u32 phy_err_count; 226 u32 chan_tx_power; 227 u32 ack_rx_bad; 228 u32 rts_bad; 229 u32 rts_good; 230 u32 fcs_bad; 231 u32 no_beacons; 232 u32 mib_int_count; 233 234 /* PDEV TX stats */ 235 s32 comp_queued; 236 s32 comp_delivered; 237 s32 msdu_enqued; 238 s32 mpdu_enqued; 239 s32 wmm_drop; 240 s32 local_enqued; 241 s32 local_freed; 242 s32 hw_queued; 243 s32 hw_reaped; 244 s32 underrun; 245 u32 hw_paused; 246 s32 tx_abort; 247 s32 mpdus_requed; 248 u32 tx_ko; 249 u32 data_rc; 250 u32 self_triggers; 251 u32 sw_retry_failure; 252 u32 illgl_rate_phy_err; 253 u32 pdev_cont_xretry; 254 u32 pdev_tx_timeout; 255 u32 pdev_resets; 256 u32 phy_underrun; 257 u32 txop_ovf; 258 u32 seq_posted; 259 u32 seq_failed_queueing; 260 u32 seq_completed; 261 u32 seq_restarted; 262 u32 mu_seq_posted; 263 u32 mpdus_sw_flush; 264 u32 mpdus_hw_filter; 265 u32 mpdus_truncated; 266 u32 mpdus_ack_failed; 267 u32 mpdus_expired; 268 269 /* PDEV RX stats */ 270 s32 mid_ppdu_route_change; 271 s32 status_rcvd; 272 s32 r0_frags; 273 s32 r1_frags; 274 s32 r2_frags; 275 s32 r3_frags; 276 s32 htt_msdus; 277 s32 htt_mpdus; 278 s32 loc_msdus; 279 s32 loc_mpdus; 280 s32 oversize_amsdu; 281 s32 phy_errs; 282 s32 phy_err_drop; 283 s32 mpdu_errs; 284 s32 rx_ovfl_errs; 285 }; 286 287 struct ath10k_fw_stats { 288 bool extended; 289 struct list_head pdevs; 290 struct list_head vdevs; 291 struct list_head peers; 292 struct list_head peers_extd; 293 }; 294 295 #define ATH10K_TPC_TABLE_TYPE_FLAG 1 296 #define ATH10K_TPC_PREAM_TABLE_END 0xFFFF 297 298 struct ath10k_tpc_table { 299 u32 pream_idx[WMI_TPC_RATE_MAX]; 300 u8 rate_code[WMI_TPC_RATE_MAX]; 301 char tpc_value[WMI_TPC_RATE_MAX][WMI_TPC_TX_N_CHAIN * WMI_TPC_BUF_SIZE]; 302 }; 303 304 struct ath10k_tpc_stats { 305 u32 reg_domain; 306 u32 chan_freq; 307 u32 phy_mode; 308 u32 twice_antenna_reduction; 309 u32 twice_max_rd_power; 310 s32 twice_antenna_gain; 311 u32 power_limit; 312 u32 num_tx_chain; 313 u32 ctl; 314 u32 rate_max; 315 u8 flag[WMI_TPC_FLAG]; 316 struct ath10k_tpc_table tpc_table[WMI_TPC_FLAG]; 317 }; 318 319 struct ath10k_dfs_stats { 320 u32 phy_errors; 321 u32 pulses_total; 322 u32 pulses_detected; 323 u32 pulses_discarded; 324 u32 radar_detected; 325 }; 326 327 #define ATH10K_MAX_NUM_PEER_IDS (1 << 11) /* htt rx_desc limit */ 328 329 struct ath10k_peer { 330 struct list_head list; 331 struct ieee80211_vif *vif; 332 struct ieee80211_sta *sta; 333 334 bool removed; 335 int vdev_id; 336 u8 addr[ETH_ALEN]; 337 DECLARE_BITMAP(peer_ids, ATH10K_MAX_NUM_PEER_IDS); 338 339 /* protected by ar->data_lock */ 340 struct ieee80211_key_conf *keys[WMI_MAX_KEY_INDEX + 1]; 341 }; 342 343 struct ath10k_txq { 344 struct list_head list; 345 unsigned long num_fw_queued; 346 unsigned long num_push_allowed; 347 }; 348 349 struct ath10k_sta { 350 struct ath10k_vif *arvif; 351 352 /* the following are protected by ar->data_lock */ 353 u32 changed; /* IEEE80211_RC_* */ 354 u32 bw; 355 u32 nss; 356 u32 smps; 357 u16 peer_id; 358 struct rate_info txrate; 359 360 struct work_struct update_wk; 361 362 #ifdef CONFIG_MAC80211_DEBUGFS 363 /* protected by conf_mutex */ 364 bool aggr_mode; 365 u64 rx_duration; 366 #endif 367 }; 368 369 #define ATH10K_VDEV_SETUP_TIMEOUT_HZ (5 * HZ) 370 371 enum ath10k_beacon_state { 372 ATH10K_BEACON_SCHEDULED = 0, 373 ATH10K_BEACON_SENDING, 374 ATH10K_BEACON_SENT, 375 }; 376 377 struct ath10k_vif { 378 struct list_head list; 379 380 u32 vdev_id; 381 u16 peer_id; 382 enum wmi_vdev_type vdev_type; 383 enum wmi_vdev_subtype vdev_subtype; 384 u32 beacon_interval; 385 u32 dtim_period; 386 struct sk_buff *beacon; 387 /* protected by data_lock */ 388 enum ath10k_beacon_state beacon_state; 389 void *beacon_buf; 390 dma_addr_t beacon_paddr; 391 unsigned long tx_paused; /* arbitrary values defined by target */ 392 393 struct ath10k *ar; 394 struct ieee80211_vif *vif; 395 396 bool is_started; 397 bool is_up; 398 bool spectral_enabled; 399 bool ps; 400 u32 aid; 401 u8 bssid[ETH_ALEN]; 402 403 struct ieee80211_key_conf *wep_keys[WMI_MAX_KEY_INDEX + 1]; 404 s8 def_wep_key_idx; 405 406 u16 tx_seq_no; 407 408 union { 409 struct { 410 u32 uapsd; 411 } sta; 412 struct { 413 /* 512 stations */ 414 u8 tim_bitmap[64]; 415 u8 tim_len; 416 u32 ssid_len; 417 u8 ssid[IEEE80211_MAX_SSID_LEN]; 418 bool hidden_ssid; 419 /* P2P_IE with NoA attribute for P2P_GO case */ 420 u32 noa_len; 421 u8 *noa_data; 422 } ap; 423 } u; 424 425 bool use_cts_prot; 426 bool nohwcrypt; 427 int num_legacy_stations; 428 int txpower; 429 struct wmi_wmm_params_all_arg wmm_params; 430 struct work_struct ap_csa_work; 431 struct delayed_work connection_loss_work; 432 struct cfg80211_bitrate_mask bitrate_mask; 433 }; 434 435 struct ath10k_vif_iter { 436 u32 vdev_id; 437 struct ath10k_vif *arvif; 438 }; 439 440 /* Copy Engine register dump, protected by ce-lock */ 441 struct ath10k_ce_crash_data { 442 __le32 base_addr; 443 __le32 src_wr_idx; 444 __le32 src_r_idx; 445 __le32 dst_wr_idx; 446 __le32 dst_r_idx; 447 }; 448 449 struct ath10k_ce_crash_hdr { 450 __le32 ce_count; 451 __le32 reserved[3]; /* for future use */ 452 struct ath10k_ce_crash_data entries[]; 453 }; 454 455 /* used for crash-dump storage, protected by data-lock */ 456 struct ath10k_fw_crash_data { 457 bool crashed_since_read; 458 459 uuid_le uuid; 460 struct timespec timestamp; 461 __le32 registers[REG_DUMP_COUNT_QCA988X]; 462 struct ath10k_ce_crash_data ce_crash_data[CE_COUNT_MAX]; 463 }; 464 465 struct ath10k_debug { 466 struct dentry *debugfs_phy; 467 468 struct ath10k_fw_stats fw_stats; 469 struct completion fw_stats_complete; 470 bool fw_stats_done; 471 472 unsigned long htt_stats_mask; 473 struct delayed_work htt_stats_dwork; 474 struct ath10k_dfs_stats dfs_stats; 475 struct ath_dfs_pool_stats dfs_pool_stats; 476 477 /* used for tpc-dump storage, protected by data-lock */ 478 struct ath10k_tpc_stats *tpc_stats; 479 480 struct completion tpc_complete; 481 482 /* protected by conf_mutex */ 483 u64 fw_dbglog_mask; 484 u32 fw_dbglog_level; 485 u32 pktlog_filter; 486 u32 reg_addr; 487 u32 nf_cal_period; 488 void *cal_data; 489 490 struct ath10k_fw_crash_data *fw_crash_data; 491 }; 492 493 enum ath10k_state { 494 ATH10K_STATE_OFF = 0, 495 ATH10K_STATE_ON, 496 497 /* When doing firmware recovery the device is first powered down. 498 * mac80211 is supposed to call in to start() hook later on. It is 499 * however possible that driver unloading and firmware crash overlap. 500 * mac80211 can wait on conf_mutex in stop() while the device is 501 * stopped in ath10k_core_restart() work holding conf_mutex. The state 502 * RESTARTED means that the device is up and mac80211 has started hw 503 * reconfiguration. Once mac80211 is done with the reconfiguration we 504 * set the state to STATE_ON in reconfig_complete(). */ 505 ATH10K_STATE_RESTARTING, 506 ATH10K_STATE_RESTARTED, 507 508 /* The device has crashed while restarting hw. This state is like ON 509 * but commands are blocked in HTC and -ECOMM response is given. This 510 * prevents completion timeouts and makes the driver more responsive to 511 * userspace commands. This is also prevents recursive recovery. */ 512 ATH10K_STATE_WEDGED, 513 514 /* factory tests */ 515 ATH10K_STATE_UTF, 516 }; 517 518 enum ath10k_firmware_mode { 519 /* the default mode, standard 802.11 functionality */ 520 ATH10K_FIRMWARE_MODE_NORMAL, 521 522 /* factory tests etc */ 523 ATH10K_FIRMWARE_MODE_UTF, 524 }; 525 526 enum ath10k_fw_features { 527 /* wmi_mgmt_rx_hdr contains extra RSSI information */ 528 ATH10K_FW_FEATURE_EXT_WMI_MGMT_RX = 0, 529 530 /* Firmware from 10X branch. Deprecated, don't use in new code. */ 531 ATH10K_FW_FEATURE_WMI_10X = 1, 532 533 /* firmware support tx frame management over WMI, otherwise it's HTT */ 534 ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX = 2, 535 536 /* Firmware does not support P2P */ 537 ATH10K_FW_FEATURE_NO_P2P = 3, 538 539 /* Firmware 10.2 feature bit. The ATH10K_FW_FEATURE_WMI_10X feature 540 * bit is required to be set as well. Deprecated, don't use in new 541 * code. 542 */ 543 ATH10K_FW_FEATURE_WMI_10_2 = 4, 544 545 /* Some firmware revisions lack proper multi-interface client powersave 546 * implementation. Enabling PS could result in connection drops, 547 * traffic stalls, etc. 548 */ 549 ATH10K_FW_FEATURE_MULTI_VIF_PS_SUPPORT = 5, 550 551 /* Some firmware revisions have an incomplete WoWLAN implementation 552 * despite WMI service bit being advertised. This feature flag is used 553 * to distinguish whether WoWLAN is really supported or not. 554 */ 555 ATH10K_FW_FEATURE_WOWLAN_SUPPORT = 6, 556 557 /* Don't trust error code from otp.bin */ 558 ATH10K_FW_FEATURE_IGNORE_OTP_RESULT = 7, 559 560 /* Some firmware revisions pad 4th hw address to 4 byte boundary making 561 * it 8 bytes long in Native Wifi Rx decap. 562 */ 563 ATH10K_FW_FEATURE_NO_NWIFI_DECAP_4ADDR_PADDING = 8, 564 565 /* Firmware supports bypassing PLL setting on init. */ 566 ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT = 9, 567 568 /* Raw mode support. If supported, FW supports receiving and trasmitting 569 * frames in raw mode. 570 */ 571 ATH10K_FW_FEATURE_RAW_MODE_SUPPORT = 10, 572 573 /* Firmware Supports Adaptive CCA*/ 574 ATH10K_FW_FEATURE_SUPPORTS_ADAPTIVE_CCA = 11, 575 576 /* Firmware supports management frame protection */ 577 ATH10K_FW_FEATURE_MFP_SUPPORT = 12, 578 579 /* Firmware supports pull-push model where host shares it's software 580 * queue state with firmware and firmware generates fetch requests 581 * telling host which queues to dequeue tx from. 582 * 583 * Primary function of this is improved MU-MIMO performance with 584 * multiple clients. 585 */ 586 ATH10K_FW_FEATURE_PEER_FLOW_CONTROL = 13, 587 588 /* Firmware supports BT-Coex without reloading firmware via pdev param. 589 * To support Bluetooth coexistence pdev param, WMI_COEX_GPIO_SUPPORT of 590 * extended resource config should be enabled always. This firmware IE 591 * is used to configure WMI_COEX_GPIO_SUPPORT. 592 */ 593 ATH10K_FW_FEATURE_BTCOEX_PARAM = 14, 594 595 /* Unused flag and proven to be not working, enable this if you want 596 * to experiment sending NULL func data frames in HTT TX 597 */ 598 ATH10K_FW_FEATURE_SKIP_NULL_FUNC_WAR = 15, 599 600 /* Firmware allow other BSS mesh broadcast/multicast frames without 601 * creating monitor interface. Appropriate rxfilters are programmed for 602 * mesh vdev by firmware itself. This feature flags will be used for 603 * not creating monitor vdev while configuring mesh node. 604 */ 605 ATH10K_FW_FEATURE_ALLOWS_MESH_BCAST = 16, 606 607 /* keep last */ 608 ATH10K_FW_FEATURE_COUNT, 609 }; 610 611 enum ath10k_dev_flags { 612 /* Indicates that ath10k device is during CAC phase of DFS */ 613 ATH10K_CAC_RUNNING, 614 ATH10K_FLAG_CORE_REGISTERED, 615 616 /* Device has crashed and needs to restart. This indicates any pending 617 * waiters should immediately cancel instead of waiting for a time out. 618 */ 619 ATH10K_FLAG_CRASH_FLUSH, 620 621 /* Use Raw mode instead of native WiFi Tx/Rx encap mode. 622 * Raw mode supports both hardware and software crypto. Native WiFi only 623 * supports hardware crypto. 624 */ 625 ATH10K_FLAG_RAW_MODE, 626 627 /* Disable HW crypto engine */ 628 ATH10K_FLAG_HW_CRYPTO_DISABLED, 629 630 /* Bluetooth coexistance enabled */ 631 ATH10K_FLAG_BTCOEX, 632 633 /* Per Station statistics service */ 634 ATH10K_FLAG_PEER_STATS, 635 }; 636 637 enum ath10k_cal_mode { 638 ATH10K_CAL_MODE_FILE, 639 ATH10K_CAL_MODE_OTP, 640 ATH10K_CAL_MODE_DT, 641 ATH10K_PRE_CAL_MODE_FILE, 642 ATH10K_PRE_CAL_MODE_DT, 643 ATH10K_CAL_MODE_EEPROM, 644 }; 645 646 enum ath10k_crypt_mode { 647 /* Only use hardware crypto engine */ 648 ATH10K_CRYPT_MODE_HW, 649 /* Only use software crypto engine */ 650 ATH10K_CRYPT_MODE_SW, 651 }; 652 653 static inline const char *ath10k_cal_mode_str(enum ath10k_cal_mode mode) 654 { 655 switch (mode) { 656 case ATH10K_CAL_MODE_FILE: 657 return "file"; 658 case ATH10K_CAL_MODE_OTP: 659 return "otp"; 660 case ATH10K_CAL_MODE_DT: 661 return "dt"; 662 case ATH10K_PRE_CAL_MODE_FILE: 663 return "pre-cal-file"; 664 case ATH10K_PRE_CAL_MODE_DT: 665 return "pre-cal-dt"; 666 case ATH10K_CAL_MODE_EEPROM: 667 return "eeprom"; 668 } 669 670 return "unknown"; 671 } 672 673 enum ath10k_scan_state { 674 ATH10K_SCAN_IDLE, 675 ATH10K_SCAN_STARTING, 676 ATH10K_SCAN_RUNNING, 677 ATH10K_SCAN_ABORTING, 678 }; 679 680 static inline const char *ath10k_scan_state_str(enum ath10k_scan_state state) 681 { 682 switch (state) { 683 case ATH10K_SCAN_IDLE: 684 return "idle"; 685 case ATH10K_SCAN_STARTING: 686 return "starting"; 687 case ATH10K_SCAN_RUNNING: 688 return "running"; 689 case ATH10K_SCAN_ABORTING: 690 return "aborting"; 691 } 692 693 return "unknown"; 694 } 695 696 enum ath10k_tx_pause_reason { 697 ATH10K_TX_PAUSE_Q_FULL, 698 ATH10K_TX_PAUSE_MAX, 699 }; 700 701 struct ath10k_fw_file { 702 const struct firmware *firmware; 703 704 char fw_version[ETHTOOL_FWVERS_LEN]; 705 706 DECLARE_BITMAP(fw_features, ATH10K_FW_FEATURE_COUNT); 707 708 enum ath10k_fw_wmi_op_version wmi_op_version; 709 enum ath10k_fw_htt_op_version htt_op_version; 710 711 const void *firmware_data; 712 size_t firmware_len; 713 714 const void *otp_data; 715 size_t otp_len; 716 717 const void *codeswap_data; 718 size_t codeswap_len; 719 720 /* The original idea of struct ath10k_fw_file was that it only 721 * contains struct firmware and pointers to various parts (actual 722 * firmware binary, otp, metadata etc) of the file. This seg_info 723 * is actually created separate but as this is used similarly as 724 * the other firmware components it's more convenient to have it 725 * here. 726 */ 727 struct ath10k_swap_code_seg_info *firmware_swap_code_seg_info; 728 }; 729 730 struct ath10k_fw_components { 731 const struct firmware *board; 732 const void *board_data; 733 size_t board_len; 734 735 struct ath10k_fw_file fw_file; 736 }; 737 738 struct ath10k_per_peer_tx_stats { 739 u32 succ_bytes; 740 u32 retry_bytes; 741 u32 failed_bytes; 742 u8 ratecode; 743 u8 flags; 744 u16 peer_id; 745 u16 succ_pkts; 746 u16 retry_pkts; 747 u16 failed_pkts; 748 u16 duration; 749 u32 reserved1; 750 u32 reserved2; 751 }; 752 753 struct ath10k { 754 struct ath_common ath_common; 755 struct ieee80211_hw *hw; 756 struct ieee80211_ops *ops; 757 struct device *dev; 758 u8 mac_addr[ETH_ALEN]; 759 760 enum ath10k_hw_rev hw_rev; 761 u16 dev_id; 762 u32 chip_id; 763 u32 target_version; 764 u8 fw_version_major; 765 u32 fw_version_minor; 766 u16 fw_version_release; 767 u16 fw_version_build; 768 u32 fw_stats_req_mask; 769 u32 phy_capability; 770 u32 hw_min_tx_power; 771 u32 hw_max_tx_power; 772 u32 hw_eeprom_rd; 773 u32 ht_cap_info; 774 u32 vht_cap_info; 775 u32 num_rf_chains; 776 u32 max_spatial_stream; 777 /* protected by conf_mutex */ 778 bool ani_enabled; 779 780 bool p2p; 781 782 struct { 783 enum ath10k_bus bus; 784 const struct ath10k_hif_ops *ops; 785 } hif; 786 787 struct completion target_suspend; 788 789 const struct ath10k_hw_regs *regs; 790 const struct ath10k_hw_values *hw_values; 791 struct ath10k_bmi bmi; 792 struct ath10k_wmi wmi; 793 struct ath10k_htc htc; 794 struct ath10k_htt htt; 795 796 struct ath10k_hw_params hw_params; 797 798 /* contains the firmware images used with ATH10K_FIRMWARE_MODE_NORMAL */ 799 struct ath10k_fw_components normal_mode_fw; 800 801 /* READ-ONLY images of the running firmware, which can be either 802 * normal or UTF. Do not modify, release etc! 803 */ 804 const struct ath10k_fw_components *running_fw; 805 806 const struct firmware *pre_cal_file; 807 const struct firmware *cal_file; 808 809 struct { 810 u32 vendor; 811 u32 device; 812 u32 subsystem_vendor; 813 u32 subsystem_device; 814 815 bool bmi_ids_valid; 816 u8 bmi_board_id; 817 u8 bmi_chip_id; 818 819 char bdf_ext[ATH10K_SMBIOS_BDF_EXT_STR_LENGTH]; 820 } id; 821 822 int fw_api; 823 int bd_api; 824 enum ath10k_cal_mode cal_mode; 825 826 struct { 827 struct completion started; 828 struct completion completed; 829 struct completion on_channel; 830 struct delayed_work timeout; 831 enum ath10k_scan_state state; 832 bool is_roc; 833 int vdev_id; 834 int roc_freq; 835 bool roc_notify; 836 } scan; 837 838 struct { 839 struct ieee80211_supported_band sbands[NUM_NL80211_BANDS]; 840 } mac; 841 842 /* should never be NULL; needed for regular htt rx */ 843 struct ieee80211_channel *rx_channel; 844 845 /* valid during scan; needed for mgmt rx during scan */ 846 struct ieee80211_channel *scan_channel; 847 848 /* current operating channel definition */ 849 struct cfg80211_chan_def chandef; 850 851 /* currently configured operating channel in firmware */ 852 struct ieee80211_channel *tgt_oper_chan; 853 854 unsigned long long free_vdev_map; 855 struct ath10k_vif *monitor_arvif; 856 bool monitor; 857 int monitor_vdev_id; 858 bool monitor_started; 859 unsigned int filter_flags; 860 unsigned long dev_flags; 861 bool dfs_block_radar_events; 862 863 /* protected by conf_mutex */ 864 bool radar_enabled; 865 int num_started_vdevs; 866 867 /* Protected by conf-mutex */ 868 u8 cfg_tx_chainmask; 869 u8 cfg_rx_chainmask; 870 871 struct completion install_key_done; 872 873 struct completion vdev_setup_done; 874 875 struct workqueue_struct *workqueue; 876 /* Auxiliary workqueue */ 877 struct workqueue_struct *workqueue_aux; 878 879 /* prevents concurrent FW reconfiguration */ 880 struct mutex conf_mutex; 881 882 /* protects shared structure data */ 883 spinlock_t data_lock; 884 /* protects: ar->txqs, artxq->list */ 885 spinlock_t txqs_lock; 886 887 struct list_head txqs; 888 struct list_head arvifs; 889 struct list_head peers; 890 struct ath10k_peer *peer_map[ATH10K_MAX_NUM_PEER_IDS]; 891 wait_queue_head_t peer_mapping_wq; 892 893 /* protected by conf_mutex */ 894 int num_peers; 895 int num_stations; 896 897 int max_num_peers; 898 int max_num_stations; 899 int max_num_vdevs; 900 int max_num_tdls_vdevs; 901 int num_active_peers; 902 int num_tids; 903 904 struct work_struct svc_rdy_work; 905 struct sk_buff *svc_rdy_skb; 906 907 struct work_struct offchan_tx_work; 908 struct sk_buff_head offchan_tx_queue; 909 struct completion offchan_tx_completed; 910 struct sk_buff *offchan_tx_skb; 911 912 struct work_struct wmi_mgmt_tx_work; 913 struct sk_buff_head wmi_mgmt_tx_queue; 914 915 enum ath10k_state state; 916 917 struct work_struct register_work; 918 struct work_struct restart_work; 919 920 /* cycle count is reported twice for each visited channel during scan. 921 * access protected by data_lock */ 922 u32 survey_last_rx_clear_count; 923 u32 survey_last_cycle_count; 924 struct survey_info survey[ATH10K_NUM_CHANS]; 925 926 /* Channel info events are expected to come in pairs without and with 927 * COMPLETE flag set respectively for each channel visit during scan. 928 * 929 * However there are deviations from this rule. This flag is used to 930 * avoid reporting garbage data. 931 */ 932 bool ch_info_can_report_survey; 933 struct completion bss_survey_done; 934 935 struct dfs_pattern_detector *dfs_detector; 936 937 unsigned long tx_paused; /* see ATH10K_TX_PAUSE_ */ 938 939 #ifdef CONFIG_ATH10K_DEBUGFS 940 struct ath10k_debug debug; 941 struct { 942 /* relay(fs) channel for spectral scan */ 943 struct rchan *rfs_chan_spec_scan; 944 945 /* spectral_mode and spec_config are protected by conf_mutex */ 946 enum ath10k_spectral_mode mode; 947 struct ath10k_spec_scan config; 948 } spectral; 949 #endif 950 951 struct { 952 /* protected by conf_mutex */ 953 struct ath10k_fw_components utf_mode_fw; 954 955 /* protected by data_lock */ 956 bool utf_monitor; 957 } testmode; 958 959 struct { 960 /* protected by data_lock */ 961 u32 fw_crash_counter; 962 u32 fw_warm_reset_counter; 963 u32 fw_cold_reset_counter; 964 } stats; 965 966 struct ath10k_thermal thermal; 967 struct ath10k_wow wow; 968 struct ath10k_per_peer_tx_stats peer_tx_stats; 969 970 /* NAPI */ 971 struct net_device napi_dev; 972 struct napi_struct napi; 973 974 struct work_struct set_coverage_class_work; 975 /* protected by conf_mutex */ 976 struct { 977 /* writing also protected by data_lock */ 978 s16 coverage_class; 979 980 u32 reg_phyclk; 981 u32 reg_slottime_conf; 982 u32 reg_slottime_orig; 983 u32 reg_ack_cts_timeout_conf; 984 u32 reg_ack_cts_timeout_orig; 985 } fw_coverage; 986 987 /* must be last */ 988 u8 drv_priv[0] __aligned(sizeof(void *)); 989 }; 990 991 static inline bool ath10k_peer_stats_enabled(struct ath10k *ar) 992 { 993 if (test_bit(ATH10K_FLAG_PEER_STATS, &ar->dev_flags) && 994 test_bit(WMI_SERVICE_PEER_STATS, ar->wmi.svc_map)) 995 return true; 996 997 return false; 998 } 999 1000 struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev, 1001 enum ath10k_bus bus, 1002 enum ath10k_hw_rev hw_rev, 1003 const struct ath10k_hif_ops *hif_ops); 1004 void ath10k_core_destroy(struct ath10k *ar); 1005 void ath10k_core_get_fw_features_str(struct ath10k *ar, 1006 char *buf, 1007 size_t max_len); 1008 int ath10k_core_fetch_firmware_api_n(struct ath10k *ar, const char *name, 1009 struct ath10k_fw_file *fw_file); 1010 1011 int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode, 1012 const struct ath10k_fw_components *fw_components); 1013 int ath10k_wait_for_suspend(struct ath10k *ar, u32 suspend_opt); 1014 void ath10k_core_stop(struct ath10k *ar); 1015 int ath10k_core_register(struct ath10k *ar, u32 chip_id); 1016 void ath10k_core_unregister(struct ath10k *ar); 1017 1018 #endif /* _CORE_H_ */ 1019