1 /* 2 * Copyright (c) 2005-2011 Atheros Communications Inc. 3 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. 4 * 5 * Permission to use, copy, modify, and/or distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 */ 17 18 #include <linux/module.h> 19 #include <linux/firmware.h> 20 #include <linux/of.h> 21 #include <linux/dmi.h> 22 #include <linux/ctype.h> 23 #include <asm/byteorder.h> 24 25 #include "core.h" 26 #include "mac.h" 27 #include "htc.h" 28 #include "hif.h" 29 #include "wmi.h" 30 #include "bmi.h" 31 #include "debug.h" 32 #include "htt.h" 33 #include "testmode.h" 34 #include "wmi-ops.h" 35 #include "coredump.h" 36 37 unsigned int ath10k_debug_mask; 38 static unsigned int ath10k_cryptmode_param; 39 static bool uart_print; 40 static bool skip_otp; 41 static bool rawmode; 42 43 /* Enable ATH10K_FW_CRASH_DUMP_REGISTERS and ATH10K_FW_CRASH_DUMP_CE_DATA 44 * by default. 45 */ 46 unsigned long ath10k_coredump_mask = 0x3; 47 48 /* FIXME: most of these should be readonly */ 49 module_param_named(debug_mask, ath10k_debug_mask, uint, 0644); 50 module_param_named(cryptmode, ath10k_cryptmode_param, uint, 0644); 51 module_param(uart_print, bool, 0644); 52 module_param(skip_otp, bool, 0644); 53 module_param(rawmode, bool, 0644); 54 module_param_named(coredump_mask, ath10k_coredump_mask, ulong, 0444); 55 56 MODULE_PARM_DESC(debug_mask, "Debugging mask"); 57 MODULE_PARM_DESC(uart_print, "Uart target debugging"); 58 MODULE_PARM_DESC(skip_otp, "Skip otp failure for calibration in testmode"); 59 MODULE_PARM_DESC(cryptmode, "Crypto mode: 0-hardware, 1-software"); 60 MODULE_PARM_DESC(rawmode, "Use raw 802.11 frame datapath"); 61 MODULE_PARM_DESC(coredump_mask, "Bitfield of what to include in firmware crash file"); 62 63 static const struct ath10k_hw_params ath10k_hw_params_list[] = { 64 { 65 .id = QCA988X_HW_2_0_VERSION, 66 .dev_id = QCA988X_2_0_DEVICE_ID, 67 .name = "qca988x hw2.0", 68 .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR, 69 .uart_pin = 7, 70 .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, 71 .otp_exe_param = 0, 72 .channel_counters_freq_hz = 88000, 73 .max_probe_resp_desc_thres = 0, 74 .cal_data_len = 2116, 75 .fw = { 76 .dir = QCA988X_HW_2_0_FW_DIR, 77 .board = QCA988X_HW_2_0_BOARD_DATA_FILE, 78 .board_size = QCA988X_BOARD_DATA_SZ, 79 .board_ext_size = QCA988X_BOARD_EXT_DATA_SZ, 80 }, 81 .hw_ops = &qca988x_ops, 82 .decap_align_bytes = 4, 83 .spectral_bin_discard = 0, 84 .vht160_mcs_rx_highest = 0, 85 .vht160_mcs_tx_highest = 0, 86 .n_cipher_suites = 8, 87 .num_peers = TARGET_TLV_NUM_PEERS, 88 .ast_skid_limit = 0x10, 89 .num_wds_entries = 0x20, 90 .target_64bit = false, 91 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 92 }, 93 { 94 .id = QCA988X_HW_2_0_VERSION, 95 .dev_id = QCA988X_2_0_DEVICE_ID_UBNT, 96 .name = "qca988x hw2.0 ubiquiti", 97 .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR, 98 .uart_pin = 7, 99 .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, 100 .otp_exe_param = 0, 101 .channel_counters_freq_hz = 88000, 102 .max_probe_resp_desc_thres = 0, 103 .cal_data_len = 2116, 104 .fw = { 105 .dir = QCA988X_HW_2_0_FW_DIR, 106 .board = QCA988X_HW_2_0_BOARD_DATA_FILE, 107 .board_size = QCA988X_BOARD_DATA_SZ, 108 .board_ext_size = QCA988X_BOARD_EXT_DATA_SZ, 109 }, 110 .hw_ops = &qca988x_ops, 111 .decap_align_bytes = 4, 112 .spectral_bin_discard = 0, 113 .vht160_mcs_rx_highest = 0, 114 .vht160_mcs_tx_highest = 0, 115 .n_cipher_suites = 8, 116 .num_peers = TARGET_TLV_NUM_PEERS, 117 .ast_skid_limit = 0x10, 118 .num_wds_entries = 0x20, 119 .target_64bit = false, 120 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 121 }, 122 { 123 .id = QCA9887_HW_1_0_VERSION, 124 .dev_id = QCA9887_1_0_DEVICE_ID, 125 .name = "qca9887 hw1.0", 126 .patch_load_addr = QCA9887_HW_1_0_PATCH_LOAD_ADDR, 127 .uart_pin = 7, 128 .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, 129 .otp_exe_param = 0, 130 .channel_counters_freq_hz = 88000, 131 .max_probe_resp_desc_thres = 0, 132 .cal_data_len = 2116, 133 .fw = { 134 .dir = QCA9887_HW_1_0_FW_DIR, 135 .board = QCA9887_HW_1_0_BOARD_DATA_FILE, 136 .board_size = QCA9887_BOARD_DATA_SZ, 137 .board_ext_size = QCA9887_BOARD_EXT_DATA_SZ, 138 }, 139 .hw_ops = &qca988x_ops, 140 .decap_align_bytes = 4, 141 .spectral_bin_discard = 0, 142 .vht160_mcs_rx_highest = 0, 143 .vht160_mcs_tx_highest = 0, 144 .n_cipher_suites = 8, 145 .num_peers = TARGET_TLV_NUM_PEERS, 146 .ast_skid_limit = 0x10, 147 .num_wds_entries = 0x20, 148 .target_64bit = false, 149 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 150 }, 151 { 152 .id = QCA6174_HW_2_1_VERSION, 153 .dev_id = QCA6164_2_1_DEVICE_ID, 154 .name = "qca6164 hw2.1", 155 .patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR, 156 .uart_pin = 6, 157 .otp_exe_param = 0, 158 .channel_counters_freq_hz = 88000, 159 .max_probe_resp_desc_thres = 0, 160 .cal_data_len = 8124, 161 .fw = { 162 .dir = QCA6174_HW_2_1_FW_DIR, 163 .board = QCA6174_HW_2_1_BOARD_DATA_FILE, 164 .board_size = QCA6174_BOARD_DATA_SZ, 165 .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ, 166 }, 167 .hw_ops = &qca988x_ops, 168 .decap_align_bytes = 4, 169 .spectral_bin_discard = 0, 170 .vht160_mcs_rx_highest = 0, 171 .vht160_mcs_tx_highest = 0, 172 .n_cipher_suites = 8, 173 .num_peers = TARGET_TLV_NUM_PEERS, 174 .ast_skid_limit = 0x10, 175 .num_wds_entries = 0x20, 176 .target_64bit = false, 177 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 178 }, 179 { 180 .id = QCA6174_HW_2_1_VERSION, 181 .dev_id = QCA6174_2_1_DEVICE_ID, 182 .name = "qca6174 hw2.1", 183 .patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR, 184 .uart_pin = 6, 185 .otp_exe_param = 0, 186 .channel_counters_freq_hz = 88000, 187 .max_probe_resp_desc_thres = 0, 188 .cal_data_len = 8124, 189 .fw = { 190 .dir = QCA6174_HW_2_1_FW_DIR, 191 .board = QCA6174_HW_2_1_BOARD_DATA_FILE, 192 .board_size = QCA6174_BOARD_DATA_SZ, 193 .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ, 194 }, 195 .hw_ops = &qca988x_ops, 196 .decap_align_bytes = 4, 197 .spectral_bin_discard = 0, 198 .vht160_mcs_rx_highest = 0, 199 .vht160_mcs_tx_highest = 0, 200 .n_cipher_suites = 8, 201 .num_peers = TARGET_TLV_NUM_PEERS, 202 .ast_skid_limit = 0x10, 203 .num_wds_entries = 0x20, 204 .target_64bit = false, 205 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 206 }, 207 { 208 .id = QCA6174_HW_3_0_VERSION, 209 .dev_id = QCA6174_2_1_DEVICE_ID, 210 .name = "qca6174 hw3.0", 211 .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR, 212 .uart_pin = 6, 213 .otp_exe_param = 0, 214 .channel_counters_freq_hz = 88000, 215 .max_probe_resp_desc_thres = 0, 216 .cal_data_len = 8124, 217 .fw = { 218 .dir = QCA6174_HW_3_0_FW_DIR, 219 .board = QCA6174_HW_3_0_BOARD_DATA_FILE, 220 .board_size = QCA6174_BOARD_DATA_SZ, 221 .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ, 222 }, 223 .hw_ops = &qca988x_ops, 224 .decap_align_bytes = 4, 225 .spectral_bin_discard = 0, 226 .vht160_mcs_rx_highest = 0, 227 .vht160_mcs_tx_highest = 0, 228 .n_cipher_suites = 8, 229 .num_peers = TARGET_TLV_NUM_PEERS, 230 .ast_skid_limit = 0x10, 231 .num_wds_entries = 0x20, 232 .target_64bit = false, 233 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 234 }, 235 { 236 .id = QCA6174_HW_3_2_VERSION, 237 .dev_id = QCA6174_2_1_DEVICE_ID, 238 .name = "qca6174 hw3.2", 239 .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR, 240 .uart_pin = 6, 241 .otp_exe_param = 0, 242 .channel_counters_freq_hz = 88000, 243 .max_probe_resp_desc_thres = 0, 244 .cal_data_len = 8124, 245 .fw = { 246 /* uses same binaries as hw3.0 */ 247 .dir = QCA6174_HW_3_0_FW_DIR, 248 .board = QCA6174_HW_3_0_BOARD_DATA_FILE, 249 .board_size = QCA6174_BOARD_DATA_SZ, 250 .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ, 251 }, 252 .hw_ops = &qca6174_ops, 253 .hw_clk = qca6174_clk, 254 .target_cpu_freq = 176000000, 255 .decap_align_bytes = 4, 256 .spectral_bin_discard = 0, 257 .vht160_mcs_rx_highest = 0, 258 .vht160_mcs_tx_highest = 0, 259 .n_cipher_suites = 8, 260 .num_peers = TARGET_TLV_NUM_PEERS, 261 .ast_skid_limit = 0x10, 262 .num_wds_entries = 0x20, 263 .target_64bit = false, 264 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 265 }, 266 { 267 .id = QCA99X0_HW_2_0_DEV_VERSION, 268 .dev_id = QCA99X0_2_0_DEVICE_ID, 269 .name = "qca99x0 hw2.0", 270 .patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR, 271 .uart_pin = 7, 272 .otp_exe_param = 0x00000700, 273 .continuous_frag_desc = true, 274 .cck_rate_map_rev2 = true, 275 .channel_counters_freq_hz = 150000, 276 .max_probe_resp_desc_thres = 24, 277 .tx_chain_mask = 0xf, 278 .rx_chain_mask = 0xf, 279 .max_spatial_stream = 4, 280 .cal_data_len = 12064, 281 .fw = { 282 .dir = QCA99X0_HW_2_0_FW_DIR, 283 .board = QCA99X0_HW_2_0_BOARD_DATA_FILE, 284 .board_size = QCA99X0_BOARD_DATA_SZ, 285 .board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ, 286 }, 287 .sw_decrypt_mcast_mgmt = true, 288 .hw_ops = &qca99x0_ops, 289 .decap_align_bytes = 1, 290 .spectral_bin_discard = 4, 291 .vht160_mcs_rx_highest = 0, 292 .vht160_mcs_tx_highest = 0, 293 .n_cipher_suites = 11, 294 .num_peers = TARGET_TLV_NUM_PEERS, 295 .ast_skid_limit = 0x10, 296 .num_wds_entries = 0x20, 297 .target_64bit = false, 298 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 299 }, 300 { 301 .id = QCA9984_HW_1_0_DEV_VERSION, 302 .dev_id = QCA9984_1_0_DEVICE_ID, 303 .name = "qca9984/qca9994 hw1.0", 304 .patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR, 305 .uart_pin = 7, 306 .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, 307 .otp_exe_param = 0x00000700, 308 .continuous_frag_desc = true, 309 .cck_rate_map_rev2 = true, 310 .channel_counters_freq_hz = 150000, 311 .max_probe_resp_desc_thres = 24, 312 .tx_chain_mask = 0xf, 313 .rx_chain_mask = 0xf, 314 .max_spatial_stream = 4, 315 .cal_data_len = 12064, 316 .fw = { 317 .dir = QCA9984_HW_1_0_FW_DIR, 318 .board = QCA9984_HW_1_0_BOARD_DATA_FILE, 319 .board_size = QCA99X0_BOARD_DATA_SZ, 320 .board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ, 321 }, 322 .sw_decrypt_mcast_mgmt = true, 323 .hw_ops = &qca99x0_ops, 324 .decap_align_bytes = 1, 325 .spectral_bin_discard = 12, 326 327 /* Can do only 2x2 VHT160 or 80+80. 1560Mbps is 4x4 80Mhz 328 * or 2x2 160Mhz, long-guard-interval. 329 */ 330 .vht160_mcs_rx_highest = 1560, 331 .vht160_mcs_tx_highest = 1560, 332 .n_cipher_suites = 11, 333 .num_peers = TARGET_TLV_NUM_PEERS, 334 .ast_skid_limit = 0x10, 335 .num_wds_entries = 0x20, 336 .target_64bit = false, 337 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 338 }, 339 { 340 .id = QCA9888_HW_2_0_DEV_VERSION, 341 .dev_id = QCA9888_2_0_DEVICE_ID, 342 .name = "qca9888 hw2.0", 343 .patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR, 344 .uart_pin = 7, 345 .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, 346 .otp_exe_param = 0x00000700, 347 .continuous_frag_desc = true, 348 .channel_counters_freq_hz = 150000, 349 .max_probe_resp_desc_thres = 24, 350 .tx_chain_mask = 3, 351 .rx_chain_mask = 3, 352 .max_spatial_stream = 2, 353 .cal_data_len = 12064, 354 .fw = { 355 .dir = QCA9888_HW_2_0_FW_DIR, 356 .board = QCA9888_HW_2_0_BOARD_DATA_FILE, 357 .board_size = QCA99X0_BOARD_DATA_SZ, 358 .board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ, 359 }, 360 .sw_decrypt_mcast_mgmt = true, 361 .hw_ops = &qca99x0_ops, 362 .decap_align_bytes = 1, 363 .spectral_bin_discard = 12, 364 365 /* Can do only 1x1 VHT160 or 80+80. 780Mbps is 2x2 80Mhz or 366 * 1x1 160Mhz, long-guard-interval. 367 */ 368 .vht160_mcs_rx_highest = 780, 369 .vht160_mcs_tx_highest = 780, 370 .n_cipher_suites = 11, 371 .num_peers = TARGET_TLV_NUM_PEERS, 372 .ast_skid_limit = 0x10, 373 .num_wds_entries = 0x20, 374 .target_64bit = false, 375 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 376 }, 377 { 378 .id = QCA9377_HW_1_0_DEV_VERSION, 379 .dev_id = QCA9377_1_0_DEVICE_ID, 380 .name = "qca9377 hw1.0", 381 .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR, 382 .uart_pin = 6, 383 .otp_exe_param = 0, 384 .channel_counters_freq_hz = 88000, 385 .max_probe_resp_desc_thres = 0, 386 .cal_data_len = 8124, 387 .fw = { 388 .dir = QCA9377_HW_1_0_FW_DIR, 389 .board = QCA9377_HW_1_0_BOARD_DATA_FILE, 390 .board_size = QCA9377_BOARD_DATA_SZ, 391 .board_ext_size = QCA9377_BOARD_EXT_DATA_SZ, 392 }, 393 .hw_ops = &qca988x_ops, 394 .decap_align_bytes = 4, 395 .spectral_bin_discard = 0, 396 .vht160_mcs_rx_highest = 0, 397 .vht160_mcs_tx_highest = 0, 398 .n_cipher_suites = 8, 399 .num_peers = TARGET_TLV_NUM_PEERS, 400 .ast_skid_limit = 0x10, 401 .num_wds_entries = 0x20, 402 .target_64bit = false, 403 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 404 }, 405 { 406 .id = QCA9377_HW_1_1_DEV_VERSION, 407 .dev_id = QCA9377_1_0_DEVICE_ID, 408 .name = "qca9377 hw1.1", 409 .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR, 410 .uart_pin = 6, 411 .otp_exe_param = 0, 412 .channel_counters_freq_hz = 88000, 413 .max_probe_resp_desc_thres = 0, 414 .cal_data_len = 8124, 415 .fw = { 416 .dir = QCA9377_HW_1_0_FW_DIR, 417 .board = QCA9377_HW_1_0_BOARD_DATA_FILE, 418 .board_size = QCA9377_BOARD_DATA_SZ, 419 .board_ext_size = QCA9377_BOARD_EXT_DATA_SZ, 420 }, 421 .hw_ops = &qca6174_ops, 422 .hw_clk = qca6174_clk, 423 .target_cpu_freq = 176000000, 424 .decap_align_bytes = 4, 425 .spectral_bin_discard = 0, 426 .vht160_mcs_rx_highest = 0, 427 .vht160_mcs_tx_highest = 0, 428 .n_cipher_suites = 8, 429 .num_peers = TARGET_TLV_NUM_PEERS, 430 .ast_skid_limit = 0x10, 431 .num_wds_entries = 0x20, 432 .target_64bit = false, 433 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 434 }, 435 { 436 .id = QCA4019_HW_1_0_DEV_VERSION, 437 .dev_id = 0, 438 .name = "qca4019 hw1.0", 439 .patch_load_addr = QCA4019_HW_1_0_PATCH_LOAD_ADDR, 440 .uart_pin = 7, 441 .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, 442 .otp_exe_param = 0x0010000, 443 .continuous_frag_desc = true, 444 .cck_rate_map_rev2 = true, 445 .channel_counters_freq_hz = 125000, 446 .max_probe_resp_desc_thres = 24, 447 .tx_chain_mask = 0x3, 448 .rx_chain_mask = 0x3, 449 .max_spatial_stream = 2, 450 .cal_data_len = 12064, 451 .fw = { 452 .dir = QCA4019_HW_1_0_FW_DIR, 453 .board = QCA4019_HW_1_0_BOARD_DATA_FILE, 454 .board_size = QCA4019_BOARD_DATA_SZ, 455 .board_ext_size = QCA4019_BOARD_EXT_DATA_SZ, 456 }, 457 .sw_decrypt_mcast_mgmt = true, 458 .hw_ops = &qca99x0_ops, 459 .decap_align_bytes = 1, 460 .spectral_bin_discard = 4, 461 .vht160_mcs_rx_highest = 0, 462 .vht160_mcs_tx_highest = 0, 463 .n_cipher_suites = 11, 464 .num_peers = TARGET_TLV_NUM_PEERS, 465 .ast_skid_limit = 0x10, 466 .num_wds_entries = 0x20, 467 .target_64bit = false, 468 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 469 }, 470 { 471 .id = WCN3990_HW_1_0_DEV_VERSION, 472 .dev_id = 0, 473 .name = "wcn3990 hw1.0", 474 .continuous_frag_desc = true, 475 .tx_chain_mask = 0x7, 476 .rx_chain_mask = 0x7, 477 .max_spatial_stream = 4, 478 .fw = { 479 .dir = WCN3990_HW_1_0_FW_DIR, 480 }, 481 .sw_decrypt_mcast_mgmt = true, 482 .hw_ops = &wcn3990_ops, 483 .decap_align_bytes = 1, 484 .num_peers = TARGET_HL_10_TLV_NUM_PEERS, 485 .ast_skid_limit = TARGET_HL_10_TLV_AST_SKID_LIMIT, 486 .num_wds_entries = TARGET_HL_10_TLV_NUM_WDS_ENTRIES, 487 .target_64bit = true, 488 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL_DUAL_MAC, 489 }, 490 }; 491 492 static const char *const ath10k_core_fw_feature_str[] = { 493 [ATH10K_FW_FEATURE_EXT_WMI_MGMT_RX] = "wmi-mgmt-rx", 494 [ATH10K_FW_FEATURE_WMI_10X] = "wmi-10.x", 495 [ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX] = "has-wmi-mgmt-tx", 496 [ATH10K_FW_FEATURE_NO_P2P] = "no-p2p", 497 [ATH10K_FW_FEATURE_WMI_10_2] = "wmi-10.2", 498 [ATH10K_FW_FEATURE_MULTI_VIF_PS_SUPPORT] = "multi-vif-ps", 499 [ATH10K_FW_FEATURE_WOWLAN_SUPPORT] = "wowlan", 500 [ATH10K_FW_FEATURE_IGNORE_OTP_RESULT] = "ignore-otp", 501 [ATH10K_FW_FEATURE_NO_NWIFI_DECAP_4ADDR_PADDING] = "no-4addr-pad", 502 [ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT] = "skip-clock-init", 503 [ATH10K_FW_FEATURE_RAW_MODE_SUPPORT] = "raw-mode", 504 [ATH10K_FW_FEATURE_SUPPORTS_ADAPTIVE_CCA] = "adaptive-cca", 505 [ATH10K_FW_FEATURE_MFP_SUPPORT] = "mfp", 506 [ATH10K_FW_FEATURE_PEER_FLOW_CONTROL] = "peer-flow-ctrl", 507 [ATH10K_FW_FEATURE_BTCOEX_PARAM] = "btcoex-param", 508 [ATH10K_FW_FEATURE_SKIP_NULL_FUNC_WAR] = "skip-null-func-war", 509 [ATH10K_FW_FEATURE_ALLOWS_MESH_BCAST] = "allows-mesh-bcast", 510 [ATH10K_FW_FEATURE_NO_PS] = "no-ps", 511 [ATH10K_FW_FEATURE_MGMT_TX_BY_REF] = "mgmt-tx-by-reference", 512 [ATH10K_FW_FEATURE_NON_BMI] = "non-bmi", 513 }; 514 515 static unsigned int ath10k_core_get_fw_feature_str(char *buf, 516 size_t buf_len, 517 enum ath10k_fw_features feat) 518 { 519 /* make sure that ath10k_core_fw_feature_str[] gets updated */ 520 BUILD_BUG_ON(ARRAY_SIZE(ath10k_core_fw_feature_str) != 521 ATH10K_FW_FEATURE_COUNT); 522 523 if (feat >= ARRAY_SIZE(ath10k_core_fw_feature_str) || 524 WARN_ON(!ath10k_core_fw_feature_str[feat])) { 525 return scnprintf(buf, buf_len, "bit%d", feat); 526 } 527 528 return scnprintf(buf, buf_len, "%s", ath10k_core_fw_feature_str[feat]); 529 } 530 531 void ath10k_core_get_fw_features_str(struct ath10k *ar, 532 char *buf, 533 size_t buf_len) 534 { 535 size_t len = 0; 536 int i; 537 538 for (i = 0; i < ATH10K_FW_FEATURE_COUNT; i++) { 539 if (test_bit(i, ar->normal_mode_fw.fw_file.fw_features)) { 540 if (len > 0) 541 len += scnprintf(buf + len, buf_len - len, ","); 542 543 len += ath10k_core_get_fw_feature_str(buf + len, 544 buf_len - len, 545 i); 546 } 547 } 548 } 549 550 static void ath10k_send_suspend_complete(struct ath10k *ar) 551 { 552 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot suspend complete\n"); 553 554 complete(&ar->target_suspend); 555 } 556 557 static void ath10k_init_sdio(struct ath10k *ar) 558 { 559 u32 param = 0; 560 561 ath10k_bmi_write32(ar, hi_mbox_io_block_sz, 256); 562 ath10k_bmi_write32(ar, hi_mbox_isr_yield_limit, 99); 563 ath10k_bmi_read32(ar, hi_acs_flags, ¶m); 564 565 param |= (HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET | 566 HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET | 567 HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE); 568 569 ath10k_bmi_write32(ar, hi_acs_flags, param); 570 } 571 572 static int ath10k_init_configure_target(struct ath10k *ar) 573 { 574 u32 param_host; 575 int ret; 576 577 /* tell target which HTC version it is used*/ 578 ret = ath10k_bmi_write32(ar, hi_app_host_interest, 579 HTC_PROTOCOL_VERSION); 580 if (ret) { 581 ath10k_err(ar, "settings HTC version failed\n"); 582 return ret; 583 } 584 585 /* set the firmware mode to STA/IBSS/AP */ 586 ret = ath10k_bmi_read32(ar, hi_option_flag, ¶m_host); 587 if (ret) { 588 ath10k_err(ar, "setting firmware mode (1/2) failed\n"); 589 return ret; 590 } 591 592 /* TODO following parameters need to be re-visited. */ 593 /* num_device */ 594 param_host |= (1 << HI_OPTION_NUM_DEV_SHIFT); 595 /* Firmware mode */ 596 /* FIXME: Why FW_MODE_AP ??.*/ 597 param_host |= (HI_OPTION_FW_MODE_AP << HI_OPTION_FW_MODE_SHIFT); 598 /* mac_addr_method */ 599 param_host |= (1 << HI_OPTION_MAC_ADDR_METHOD_SHIFT); 600 /* firmware_bridge */ 601 param_host |= (0 << HI_OPTION_FW_BRIDGE_SHIFT); 602 /* fwsubmode */ 603 param_host |= (0 << HI_OPTION_FW_SUBMODE_SHIFT); 604 605 ret = ath10k_bmi_write32(ar, hi_option_flag, param_host); 606 if (ret) { 607 ath10k_err(ar, "setting firmware mode (2/2) failed\n"); 608 return ret; 609 } 610 611 /* We do all byte-swapping on the host */ 612 ret = ath10k_bmi_write32(ar, hi_be, 0); 613 if (ret) { 614 ath10k_err(ar, "setting host CPU BE mode failed\n"); 615 return ret; 616 } 617 618 /* FW descriptor/Data swap flags */ 619 ret = ath10k_bmi_write32(ar, hi_fw_swap, 0); 620 621 if (ret) { 622 ath10k_err(ar, "setting FW data/desc swap flags failed\n"); 623 return ret; 624 } 625 626 /* Some devices have a special sanity check that verifies the PCI 627 * Device ID is written to this host interest var. It is known to be 628 * required to boot QCA6164. 629 */ 630 ret = ath10k_bmi_write32(ar, hi_hci_uart_pwr_mgmt_params_ext, 631 ar->dev_id); 632 if (ret) { 633 ath10k_err(ar, "failed to set pwr_mgmt_params: %d\n", ret); 634 return ret; 635 } 636 637 return 0; 638 } 639 640 static const struct firmware *ath10k_fetch_fw_file(struct ath10k *ar, 641 const char *dir, 642 const char *file) 643 { 644 char filename[100]; 645 const struct firmware *fw; 646 int ret; 647 648 if (file == NULL) 649 return ERR_PTR(-ENOENT); 650 651 if (dir == NULL) 652 dir = "."; 653 654 snprintf(filename, sizeof(filename), "%s/%s", dir, file); 655 ret = request_firmware(&fw, filename, ar->dev); 656 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot fw request '%s': %d\n", 657 filename, ret); 658 659 if (ret) 660 return ERR_PTR(ret); 661 662 return fw; 663 } 664 665 static int ath10k_push_board_ext_data(struct ath10k *ar, const void *data, 666 size_t data_len) 667 { 668 u32 board_data_size = ar->hw_params.fw.board_size; 669 u32 board_ext_data_size = ar->hw_params.fw.board_ext_size; 670 u32 board_ext_data_addr; 671 int ret; 672 673 ret = ath10k_bmi_read32(ar, hi_board_ext_data, &board_ext_data_addr); 674 if (ret) { 675 ath10k_err(ar, "could not read board ext data addr (%d)\n", 676 ret); 677 return ret; 678 } 679 680 ath10k_dbg(ar, ATH10K_DBG_BOOT, 681 "boot push board extended data addr 0x%x\n", 682 board_ext_data_addr); 683 684 if (board_ext_data_addr == 0) 685 return 0; 686 687 if (data_len != (board_data_size + board_ext_data_size)) { 688 ath10k_err(ar, "invalid board (ext) data sizes %zu != %d+%d\n", 689 data_len, board_data_size, board_ext_data_size); 690 return -EINVAL; 691 } 692 693 ret = ath10k_bmi_write_memory(ar, board_ext_data_addr, 694 data + board_data_size, 695 board_ext_data_size); 696 if (ret) { 697 ath10k_err(ar, "could not write board ext data (%d)\n", ret); 698 return ret; 699 } 700 701 ret = ath10k_bmi_write32(ar, hi_board_ext_data_config, 702 (board_ext_data_size << 16) | 1); 703 if (ret) { 704 ath10k_err(ar, "could not write board ext data bit (%d)\n", 705 ret); 706 return ret; 707 } 708 709 return 0; 710 } 711 712 static int ath10k_download_board_data(struct ath10k *ar, const void *data, 713 size_t data_len) 714 { 715 u32 board_data_size = ar->hw_params.fw.board_size; 716 u32 address; 717 int ret; 718 719 ret = ath10k_push_board_ext_data(ar, data, data_len); 720 if (ret) { 721 ath10k_err(ar, "could not push board ext data (%d)\n", ret); 722 goto exit; 723 } 724 725 ret = ath10k_bmi_read32(ar, hi_board_data, &address); 726 if (ret) { 727 ath10k_err(ar, "could not read board data addr (%d)\n", ret); 728 goto exit; 729 } 730 731 ret = ath10k_bmi_write_memory(ar, address, data, 732 min_t(u32, board_data_size, 733 data_len)); 734 if (ret) { 735 ath10k_err(ar, "could not write board data (%d)\n", ret); 736 goto exit; 737 } 738 739 ret = ath10k_bmi_write32(ar, hi_board_data_initialized, 1); 740 if (ret) { 741 ath10k_err(ar, "could not write board data bit (%d)\n", ret); 742 goto exit; 743 } 744 745 exit: 746 return ret; 747 } 748 749 static int ath10k_download_cal_file(struct ath10k *ar, 750 const struct firmware *file) 751 { 752 int ret; 753 754 if (!file) 755 return -ENOENT; 756 757 if (IS_ERR(file)) 758 return PTR_ERR(file); 759 760 ret = ath10k_download_board_data(ar, file->data, file->size); 761 if (ret) { 762 ath10k_err(ar, "failed to download cal_file data: %d\n", ret); 763 return ret; 764 } 765 766 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot cal file downloaded\n"); 767 768 return 0; 769 } 770 771 static int ath10k_download_cal_dt(struct ath10k *ar, const char *dt_name) 772 { 773 struct device_node *node; 774 int data_len; 775 void *data; 776 int ret; 777 778 node = ar->dev->of_node; 779 if (!node) 780 /* Device Tree is optional, don't print any warnings if 781 * there's no node for ath10k. 782 */ 783 return -ENOENT; 784 785 if (!of_get_property(node, dt_name, &data_len)) { 786 /* The calibration data node is optional */ 787 return -ENOENT; 788 } 789 790 if (data_len != ar->hw_params.cal_data_len) { 791 ath10k_warn(ar, "invalid calibration data length in DT: %d\n", 792 data_len); 793 ret = -EMSGSIZE; 794 goto out; 795 } 796 797 data = kmalloc(data_len, GFP_KERNEL); 798 if (!data) { 799 ret = -ENOMEM; 800 goto out; 801 } 802 803 ret = of_property_read_u8_array(node, dt_name, data, data_len); 804 if (ret) { 805 ath10k_warn(ar, "failed to read calibration data from DT: %d\n", 806 ret); 807 goto out_free; 808 } 809 810 ret = ath10k_download_board_data(ar, data, data_len); 811 if (ret) { 812 ath10k_warn(ar, "failed to download calibration data from Device Tree: %d\n", 813 ret); 814 goto out_free; 815 } 816 817 ret = 0; 818 819 out_free: 820 kfree(data); 821 822 out: 823 return ret; 824 } 825 826 static int ath10k_download_cal_eeprom(struct ath10k *ar) 827 { 828 size_t data_len; 829 void *data = NULL; 830 int ret; 831 832 ret = ath10k_hif_fetch_cal_eeprom(ar, &data, &data_len); 833 if (ret) { 834 if (ret != -EOPNOTSUPP) 835 ath10k_warn(ar, "failed to read calibration data from EEPROM: %d\n", 836 ret); 837 goto out_free; 838 } 839 840 ret = ath10k_download_board_data(ar, data, data_len); 841 if (ret) { 842 ath10k_warn(ar, "failed to download calibration data from EEPROM: %d\n", 843 ret); 844 goto out_free; 845 } 846 847 ret = 0; 848 849 out_free: 850 kfree(data); 851 852 return ret; 853 } 854 855 static int ath10k_core_get_board_id_from_otp(struct ath10k *ar) 856 { 857 u32 result, address; 858 u8 board_id, chip_id; 859 int ret, bmi_board_id_param; 860 861 address = ar->hw_params.patch_load_addr; 862 863 if (!ar->normal_mode_fw.fw_file.otp_data || 864 !ar->normal_mode_fw.fw_file.otp_len) { 865 ath10k_warn(ar, 866 "failed to retrieve board id because of invalid otp\n"); 867 return -ENODATA; 868 } 869 870 ath10k_dbg(ar, ATH10K_DBG_BOOT, 871 "boot upload otp to 0x%x len %zd for board id\n", 872 address, ar->normal_mode_fw.fw_file.otp_len); 873 874 ret = ath10k_bmi_fast_download(ar, address, 875 ar->normal_mode_fw.fw_file.otp_data, 876 ar->normal_mode_fw.fw_file.otp_len); 877 if (ret) { 878 ath10k_err(ar, "could not write otp for board id check: %d\n", 879 ret); 880 return ret; 881 } 882 883 if (ar->cal_mode == ATH10K_PRE_CAL_MODE_DT || 884 ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE) 885 bmi_board_id_param = BMI_PARAM_GET_FLASH_BOARD_ID; 886 else 887 bmi_board_id_param = BMI_PARAM_GET_EEPROM_BOARD_ID; 888 889 ret = ath10k_bmi_execute(ar, address, bmi_board_id_param, &result); 890 if (ret) { 891 ath10k_err(ar, "could not execute otp for board id check: %d\n", 892 ret); 893 return ret; 894 } 895 896 board_id = MS(result, ATH10K_BMI_BOARD_ID_FROM_OTP); 897 chip_id = MS(result, ATH10K_BMI_CHIP_ID_FROM_OTP); 898 899 ath10k_dbg(ar, ATH10K_DBG_BOOT, 900 "boot get otp board id result 0x%08x board_id %d chip_id %d\n", 901 result, board_id, chip_id); 902 903 if ((result & ATH10K_BMI_BOARD_ID_STATUS_MASK) != 0 || 904 (board_id == 0)) { 905 ath10k_dbg(ar, ATH10K_DBG_BOOT, 906 "board id does not exist in otp, ignore it\n"); 907 return -EOPNOTSUPP; 908 } 909 910 ar->id.bmi_ids_valid = true; 911 ar->id.bmi_board_id = board_id; 912 ar->id.bmi_chip_id = chip_id; 913 914 return 0; 915 } 916 917 static void ath10k_core_check_bdfext(const struct dmi_header *hdr, void *data) 918 { 919 struct ath10k *ar = data; 920 const char *bdf_ext; 921 const char *magic = ATH10K_SMBIOS_BDF_EXT_MAGIC; 922 u8 bdf_enabled; 923 int i; 924 925 if (hdr->type != ATH10K_SMBIOS_BDF_EXT_TYPE) 926 return; 927 928 if (hdr->length != ATH10K_SMBIOS_BDF_EXT_LENGTH) { 929 ath10k_dbg(ar, ATH10K_DBG_BOOT, 930 "wrong smbios bdf ext type length (%d).\n", 931 hdr->length); 932 return; 933 } 934 935 bdf_enabled = *((u8 *)hdr + ATH10K_SMBIOS_BDF_EXT_OFFSET); 936 if (!bdf_enabled) { 937 ath10k_dbg(ar, ATH10K_DBG_BOOT, "bdf variant name not found.\n"); 938 return; 939 } 940 941 /* Only one string exists (per spec) */ 942 bdf_ext = (char *)hdr + hdr->length; 943 944 if (memcmp(bdf_ext, magic, strlen(magic)) != 0) { 945 ath10k_dbg(ar, ATH10K_DBG_BOOT, 946 "bdf variant magic does not match.\n"); 947 return; 948 } 949 950 for (i = 0; i < strlen(bdf_ext); i++) { 951 if (!isascii(bdf_ext[i]) || !isprint(bdf_ext[i])) { 952 ath10k_dbg(ar, ATH10K_DBG_BOOT, 953 "bdf variant name contains non ascii chars.\n"); 954 return; 955 } 956 } 957 958 /* Copy extension name without magic suffix */ 959 if (strscpy(ar->id.bdf_ext, bdf_ext + strlen(magic), 960 sizeof(ar->id.bdf_ext)) < 0) { 961 ath10k_dbg(ar, ATH10K_DBG_BOOT, 962 "bdf variant string is longer than the buffer can accommodate (variant: %s)\n", 963 bdf_ext); 964 return; 965 } 966 967 ath10k_dbg(ar, ATH10K_DBG_BOOT, 968 "found and validated bdf variant smbios_type 0x%x bdf %s\n", 969 ATH10K_SMBIOS_BDF_EXT_TYPE, bdf_ext); 970 } 971 972 static int ath10k_core_check_smbios(struct ath10k *ar) 973 { 974 ar->id.bdf_ext[0] = '\0'; 975 dmi_walk(ath10k_core_check_bdfext, ar); 976 977 if (ar->id.bdf_ext[0] == '\0') 978 return -ENODATA; 979 980 return 0; 981 } 982 983 static int ath10k_core_check_dt(struct ath10k *ar) 984 { 985 struct device_node *node; 986 const char *variant = NULL; 987 988 node = ar->dev->of_node; 989 if (!node) 990 return -ENOENT; 991 992 of_property_read_string(node, "qcom,ath10k-calibration-variant", 993 &variant); 994 if (!variant) 995 return -ENODATA; 996 997 if (strscpy(ar->id.bdf_ext, variant, sizeof(ar->id.bdf_ext)) < 0) 998 ath10k_dbg(ar, ATH10K_DBG_BOOT, 999 "bdf variant string is longer than the buffer can accommodate (variant: %s)\n", 1000 variant); 1001 1002 return 0; 1003 } 1004 1005 static int ath10k_download_and_run_otp(struct ath10k *ar) 1006 { 1007 u32 result, address = ar->hw_params.patch_load_addr; 1008 u32 bmi_otp_exe_param = ar->hw_params.otp_exe_param; 1009 int ret; 1010 1011 ret = ath10k_download_board_data(ar, 1012 ar->running_fw->board_data, 1013 ar->running_fw->board_len); 1014 if (ret) { 1015 ath10k_err(ar, "failed to download board data: %d\n", ret); 1016 return ret; 1017 } 1018 1019 /* OTP is optional */ 1020 1021 if (!ar->running_fw->fw_file.otp_data || 1022 !ar->running_fw->fw_file.otp_len) { 1023 ath10k_warn(ar, "Not running otp, calibration will be incorrect (otp-data %pK otp_len %zd)!\n", 1024 ar->running_fw->fw_file.otp_data, 1025 ar->running_fw->fw_file.otp_len); 1026 return 0; 1027 } 1028 1029 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot upload otp to 0x%x len %zd\n", 1030 address, ar->running_fw->fw_file.otp_len); 1031 1032 ret = ath10k_bmi_fast_download(ar, address, 1033 ar->running_fw->fw_file.otp_data, 1034 ar->running_fw->fw_file.otp_len); 1035 if (ret) { 1036 ath10k_err(ar, "could not write otp (%d)\n", ret); 1037 return ret; 1038 } 1039 1040 /* As of now pre-cal is valid for 10_4 variants */ 1041 if (ar->cal_mode == ATH10K_PRE_CAL_MODE_DT || 1042 ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE) 1043 bmi_otp_exe_param = BMI_PARAM_FLASH_SECTION_ALL; 1044 1045 ret = ath10k_bmi_execute(ar, address, bmi_otp_exe_param, &result); 1046 if (ret) { 1047 ath10k_err(ar, "could not execute otp (%d)\n", ret); 1048 return ret; 1049 } 1050 1051 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot otp execute result %d\n", result); 1052 1053 if (!(skip_otp || test_bit(ATH10K_FW_FEATURE_IGNORE_OTP_RESULT, 1054 ar->running_fw->fw_file.fw_features)) && 1055 result != 0) { 1056 ath10k_err(ar, "otp calibration failed: %d", result); 1057 return -EINVAL; 1058 } 1059 1060 return 0; 1061 } 1062 1063 static int ath10k_download_fw(struct ath10k *ar) 1064 { 1065 u32 address, data_len; 1066 const void *data; 1067 int ret; 1068 1069 address = ar->hw_params.patch_load_addr; 1070 1071 data = ar->running_fw->fw_file.firmware_data; 1072 data_len = ar->running_fw->fw_file.firmware_len; 1073 1074 ret = ath10k_swap_code_seg_configure(ar, &ar->running_fw->fw_file); 1075 if (ret) { 1076 ath10k_err(ar, "failed to configure fw code swap: %d\n", 1077 ret); 1078 return ret; 1079 } 1080 1081 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1082 "boot uploading firmware image %pK len %d\n", 1083 data, data_len); 1084 1085 ret = ath10k_bmi_fast_download(ar, address, data, data_len); 1086 if (ret) { 1087 ath10k_err(ar, "failed to download firmware: %d\n", 1088 ret); 1089 return ret; 1090 } 1091 1092 return ret; 1093 } 1094 1095 static void ath10k_core_free_board_files(struct ath10k *ar) 1096 { 1097 if (!IS_ERR(ar->normal_mode_fw.board)) 1098 release_firmware(ar->normal_mode_fw.board); 1099 1100 ar->normal_mode_fw.board = NULL; 1101 ar->normal_mode_fw.board_data = NULL; 1102 ar->normal_mode_fw.board_len = 0; 1103 } 1104 1105 static void ath10k_core_free_firmware_files(struct ath10k *ar) 1106 { 1107 if (!IS_ERR(ar->normal_mode_fw.fw_file.firmware)) 1108 release_firmware(ar->normal_mode_fw.fw_file.firmware); 1109 1110 if (!IS_ERR(ar->cal_file)) 1111 release_firmware(ar->cal_file); 1112 1113 if (!IS_ERR(ar->pre_cal_file)) 1114 release_firmware(ar->pre_cal_file); 1115 1116 ath10k_swap_code_seg_release(ar, &ar->normal_mode_fw.fw_file); 1117 1118 ar->normal_mode_fw.fw_file.otp_data = NULL; 1119 ar->normal_mode_fw.fw_file.otp_len = 0; 1120 1121 ar->normal_mode_fw.fw_file.firmware = NULL; 1122 ar->normal_mode_fw.fw_file.firmware_data = NULL; 1123 ar->normal_mode_fw.fw_file.firmware_len = 0; 1124 1125 ar->cal_file = NULL; 1126 ar->pre_cal_file = NULL; 1127 } 1128 1129 static int ath10k_fetch_cal_file(struct ath10k *ar) 1130 { 1131 char filename[100]; 1132 1133 /* pre-cal-<bus>-<id>.bin */ 1134 scnprintf(filename, sizeof(filename), "pre-cal-%s-%s.bin", 1135 ath10k_bus_str(ar->hif.bus), dev_name(ar->dev)); 1136 1137 ar->pre_cal_file = ath10k_fetch_fw_file(ar, ATH10K_FW_DIR, filename); 1138 if (!IS_ERR(ar->pre_cal_file)) 1139 goto success; 1140 1141 /* cal-<bus>-<id>.bin */ 1142 scnprintf(filename, sizeof(filename), "cal-%s-%s.bin", 1143 ath10k_bus_str(ar->hif.bus), dev_name(ar->dev)); 1144 1145 ar->cal_file = ath10k_fetch_fw_file(ar, ATH10K_FW_DIR, filename); 1146 if (IS_ERR(ar->cal_file)) 1147 /* calibration file is optional, don't print any warnings */ 1148 return PTR_ERR(ar->cal_file); 1149 success: 1150 ath10k_dbg(ar, ATH10K_DBG_BOOT, "found calibration file %s/%s\n", 1151 ATH10K_FW_DIR, filename); 1152 1153 return 0; 1154 } 1155 1156 static int ath10k_core_fetch_board_data_api_1(struct ath10k *ar) 1157 { 1158 if (!ar->hw_params.fw.board) { 1159 ath10k_err(ar, "failed to find board file fw entry\n"); 1160 return -EINVAL; 1161 } 1162 1163 ar->normal_mode_fw.board = ath10k_fetch_fw_file(ar, 1164 ar->hw_params.fw.dir, 1165 ar->hw_params.fw.board); 1166 if (IS_ERR(ar->normal_mode_fw.board)) 1167 return PTR_ERR(ar->normal_mode_fw.board); 1168 1169 ar->normal_mode_fw.board_data = ar->normal_mode_fw.board->data; 1170 ar->normal_mode_fw.board_len = ar->normal_mode_fw.board->size; 1171 1172 return 0; 1173 } 1174 1175 static int ath10k_core_parse_bd_ie_board(struct ath10k *ar, 1176 const void *buf, size_t buf_len, 1177 const char *boardname) 1178 { 1179 const struct ath10k_fw_ie *hdr; 1180 bool name_match_found; 1181 int ret, board_ie_id; 1182 size_t board_ie_len; 1183 const void *board_ie_data; 1184 1185 name_match_found = false; 1186 1187 /* go through ATH10K_BD_IE_BOARD_ elements */ 1188 while (buf_len > sizeof(struct ath10k_fw_ie)) { 1189 hdr = buf; 1190 board_ie_id = le32_to_cpu(hdr->id); 1191 board_ie_len = le32_to_cpu(hdr->len); 1192 board_ie_data = hdr->data; 1193 1194 buf_len -= sizeof(*hdr); 1195 buf += sizeof(*hdr); 1196 1197 if (buf_len < ALIGN(board_ie_len, 4)) { 1198 ath10k_err(ar, "invalid ATH10K_BD_IE_BOARD length: %zu < %zu\n", 1199 buf_len, ALIGN(board_ie_len, 4)); 1200 ret = -EINVAL; 1201 goto out; 1202 } 1203 1204 switch (board_ie_id) { 1205 case ATH10K_BD_IE_BOARD_NAME: 1206 ath10k_dbg_dump(ar, ATH10K_DBG_BOOT, "board name", "", 1207 board_ie_data, board_ie_len); 1208 1209 if (board_ie_len != strlen(boardname)) 1210 break; 1211 1212 ret = memcmp(board_ie_data, boardname, strlen(boardname)); 1213 if (ret) 1214 break; 1215 1216 name_match_found = true; 1217 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1218 "boot found match for name '%s'", 1219 boardname); 1220 break; 1221 case ATH10K_BD_IE_BOARD_DATA: 1222 if (!name_match_found) 1223 /* no match found */ 1224 break; 1225 1226 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1227 "boot found board data for '%s'", 1228 boardname); 1229 1230 ar->normal_mode_fw.board_data = board_ie_data; 1231 ar->normal_mode_fw.board_len = board_ie_len; 1232 1233 ret = 0; 1234 goto out; 1235 default: 1236 ath10k_warn(ar, "unknown ATH10K_BD_IE_BOARD found: %d\n", 1237 board_ie_id); 1238 break; 1239 } 1240 1241 /* jump over the padding */ 1242 board_ie_len = ALIGN(board_ie_len, 4); 1243 1244 buf_len -= board_ie_len; 1245 buf += board_ie_len; 1246 } 1247 1248 /* no match found */ 1249 ret = -ENOENT; 1250 1251 out: 1252 return ret; 1253 } 1254 1255 static int ath10k_core_fetch_board_data_api_n(struct ath10k *ar, 1256 const char *boardname, 1257 const char *filename) 1258 { 1259 size_t len, magic_len, ie_len; 1260 struct ath10k_fw_ie *hdr; 1261 const u8 *data; 1262 int ret, ie_id; 1263 1264 ar->normal_mode_fw.board = ath10k_fetch_fw_file(ar, 1265 ar->hw_params.fw.dir, 1266 filename); 1267 if (IS_ERR(ar->normal_mode_fw.board)) 1268 return PTR_ERR(ar->normal_mode_fw.board); 1269 1270 data = ar->normal_mode_fw.board->data; 1271 len = ar->normal_mode_fw.board->size; 1272 1273 /* magic has extra null byte padded */ 1274 magic_len = strlen(ATH10K_BOARD_MAGIC) + 1; 1275 if (len < magic_len) { 1276 ath10k_err(ar, "failed to find magic value in %s/%s, file too short: %zu\n", 1277 ar->hw_params.fw.dir, filename, len); 1278 ret = -EINVAL; 1279 goto err; 1280 } 1281 1282 if (memcmp(data, ATH10K_BOARD_MAGIC, magic_len)) { 1283 ath10k_err(ar, "found invalid board magic\n"); 1284 ret = -EINVAL; 1285 goto err; 1286 } 1287 1288 /* magic is padded to 4 bytes */ 1289 magic_len = ALIGN(magic_len, 4); 1290 if (len < magic_len) { 1291 ath10k_err(ar, "failed: %s/%s too small to contain board data, len: %zu\n", 1292 ar->hw_params.fw.dir, filename, len); 1293 ret = -EINVAL; 1294 goto err; 1295 } 1296 1297 data += magic_len; 1298 len -= magic_len; 1299 1300 while (len > sizeof(struct ath10k_fw_ie)) { 1301 hdr = (struct ath10k_fw_ie *)data; 1302 ie_id = le32_to_cpu(hdr->id); 1303 ie_len = le32_to_cpu(hdr->len); 1304 1305 len -= sizeof(*hdr); 1306 data = hdr->data; 1307 1308 if (len < ALIGN(ie_len, 4)) { 1309 ath10k_err(ar, "invalid length for board ie_id %d ie_len %zu len %zu\n", 1310 ie_id, ie_len, len); 1311 ret = -EINVAL; 1312 goto err; 1313 } 1314 1315 switch (ie_id) { 1316 case ATH10K_BD_IE_BOARD: 1317 ret = ath10k_core_parse_bd_ie_board(ar, data, ie_len, 1318 boardname); 1319 if (ret == -ENOENT && ar->id.bdf_ext[0] != '\0') { 1320 /* try default bdf if variant was not found */ 1321 char *s, *v = ",variant="; 1322 char boardname2[100]; 1323 1324 strlcpy(boardname2, boardname, 1325 sizeof(boardname2)); 1326 1327 s = strstr(boardname2, v); 1328 if (s) 1329 *s = '\0'; /* strip ",variant=%s" */ 1330 1331 ret = ath10k_core_parse_bd_ie_board(ar, data, 1332 ie_len, 1333 boardname2); 1334 } 1335 1336 if (ret == -ENOENT) 1337 /* no match found, continue */ 1338 break; 1339 else if (ret) 1340 /* there was an error, bail out */ 1341 goto err; 1342 1343 /* board data found */ 1344 goto out; 1345 } 1346 1347 /* jump over the padding */ 1348 ie_len = ALIGN(ie_len, 4); 1349 1350 len -= ie_len; 1351 data += ie_len; 1352 } 1353 1354 out: 1355 if (!ar->normal_mode_fw.board_data || !ar->normal_mode_fw.board_len) { 1356 ath10k_err(ar, 1357 "failed to fetch board data for %s from %s/%s\n", 1358 boardname, ar->hw_params.fw.dir, filename); 1359 ret = -ENODATA; 1360 goto err; 1361 } 1362 1363 return 0; 1364 1365 err: 1366 ath10k_core_free_board_files(ar); 1367 return ret; 1368 } 1369 1370 static int ath10k_core_create_board_name(struct ath10k *ar, char *name, 1371 size_t name_len) 1372 { 1373 /* strlen(',variant=') + strlen(ar->id.bdf_ext) */ 1374 char variant[9 + ATH10K_SMBIOS_BDF_EXT_STR_LENGTH] = { 0 }; 1375 1376 if (ar->id.bdf_ext[0] != '\0') 1377 scnprintf(variant, sizeof(variant), ",variant=%s", 1378 ar->id.bdf_ext); 1379 1380 if (ar->id.bmi_ids_valid) { 1381 scnprintf(name, name_len, 1382 "bus=%s,bmi-chip-id=%d,bmi-board-id=%d%s", 1383 ath10k_bus_str(ar->hif.bus), 1384 ar->id.bmi_chip_id, 1385 ar->id.bmi_board_id, variant); 1386 goto out; 1387 } 1388 1389 scnprintf(name, name_len, 1390 "bus=%s,vendor=%04x,device=%04x,subsystem-vendor=%04x,subsystem-device=%04x%s", 1391 ath10k_bus_str(ar->hif.bus), 1392 ar->id.vendor, ar->id.device, 1393 ar->id.subsystem_vendor, ar->id.subsystem_device, variant); 1394 out: 1395 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot using board name '%s'\n", name); 1396 1397 return 0; 1398 } 1399 1400 static int ath10k_core_fetch_board_file(struct ath10k *ar) 1401 { 1402 char boardname[100]; 1403 int ret; 1404 1405 ret = ath10k_core_create_board_name(ar, boardname, sizeof(boardname)); 1406 if (ret) { 1407 ath10k_err(ar, "failed to create board name: %d", ret); 1408 return ret; 1409 } 1410 1411 ar->bd_api = 2; 1412 ret = ath10k_core_fetch_board_data_api_n(ar, boardname, 1413 ATH10K_BOARD_API2_FILE); 1414 if (!ret) 1415 goto success; 1416 1417 ar->bd_api = 1; 1418 ret = ath10k_core_fetch_board_data_api_1(ar); 1419 if (ret) { 1420 ath10k_err(ar, "failed to fetch board-2.bin or board.bin from %s\n", 1421 ar->hw_params.fw.dir); 1422 return ret; 1423 } 1424 1425 success: 1426 ath10k_dbg(ar, ATH10K_DBG_BOOT, "using board api %d\n", ar->bd_api); 1427 return 0; 1428 } 1429 1430 int ath10k_core_fetch_firmware_api_n(struct ath10k *ar, const char *name, 1431 struct ath10k_fw_file *fw_file) 1432 { 1433 size_t magic_len, len, ie_len; 1434 int ie_id, i, index, bit, ret; 1435 struct ath10k_fw_ie *hdr; 1436 const u8 *data; 1437 __le32 *timestamp, *version; 1438 1439 /* first fetch the firmware file (firmware-*.bin) */ 1440 fw_file->firmware = ath10k_fetch_fw_file(ar, ar->hw_params.fw.dir, 1441 name); 1442 if (IS_ERR(fw_file->firmware)) 1443 return PTR_ERR(fw_file->firmware); 1444 1445 data = fw_file->firmware->data; 1446 len = fw_file->firmware->size; 1447 1448 /* magic also includes the null byte, check that as well */ 1449 magic_len = strlen(ATH10K_FIRMWARE_MAGIC) + 1; 1450 1451 if (len < magic_len) { 1452 ath10k_err(ar, "firmware file '%s/%s' too small to contain magic: %zu\n", 1453 ar->hw_params.fw.dir, name, len); 1454 ret = -EINVAL; 1455 goto err; 1456 } 1457 1458 if (memcmp(data, ATH10K_FIRMWARE_MAGIC, magic_len) != 0) { 1459 ath10k_err(ar, "invalid firmware magic\n"); 1460 ret = -EINVAL; 1461 goto err; 1462 } 1463 1464 /* jump over the padding */ 1465 magic_len = ALIGN(magic_len, 4); 1466 1467 len -= magic_len; 1468 data += magic_len; 1469 1470 /* loop elements */ 1471 while (len > sizeof(struct ath10k_fw_ie)) { 1472 hdr = (struct ath10k_fw_ie *)data; 1473 1474 ie_id = le32_to_cpu(hdr->id); 1475 ie_len = le32_to_cpu(hdr->len); 1476 1477 len -= sizeof(*hdr); 1478 data += sizeof(*hdr); 1479 1480 if (len < ie_len) { 1481 ath10k_err(ar, "invalid length for FW IE %d (%zu < %zu)\n", 1482 ie_id, len, ie_len); 1483 ret = -EINVAL; 1484 goto err; 1485 } 1486 1487 switch (ie_id) { 1488 case ATH10K_FW_IE_FW_VERSION: 1489 if (ie_len > sizeof(fw_file->fw_version) - 1) 1490 break; 1491 1492 memcpy(fw_file->fw_version, data, ie_len); 1493 fw_file->fw_version[ie_len] = '\0'; 1494 1495 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1496 "found fw version %s\n", 1497 fw_file->fw_version); 1498 break; 1499 case ATH10K_FW_IE_TIMESTAMP: 1500 if (ie_len != sizeof(u32)) 1501 break; 1502 1503 timestamp = (__le32 *)data; 1504 1505 ath10k_dbg(ar, ATH10K_DBG_BOOT, "found fw timestamp %d\n", 1506 le32_to_cpup(timestamp)); 1507 break; 1508 case ATH10K_FW_IE_FEATURES: 1509 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1510 "found firmware features ie (%zd B)\n", 1511 ie_len); 1512 1513 for (i = 0; i < ATH10K_FW_FEATURE_COUNT; i++) { 1514 index = i / 8; 1515 bit = i % 8; 1516 1517 if (index == ie_len) 1518 break; 1519 1520 if (data[index] & (1 << bit)) { 1521 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1522 "Enabling feature bit: %i\n", 1523 i); 1524 __set_bit(i, fw_file->fw_features); 1525 } 1526 } 1527 1528 ath10k_dbg_dump(ar, ATH10K_DBG_BOOT, "features", "", 1529 fw_file->fw_features, 1530 sizeof(fw_file->fw_features)); 1531 break; 1532 case ATH10K_FW_IE_FW_IMAGE: 1533 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1534 "found fw image ie (%zd B)\n", 1535 ie_len); 1536 1537 fw_file->firmware_data = data; 1538 fw_file->firmware_len = ie_len; 1539 1540 break; 1541 case ATH10K_FW_IE_OTP_IMAGE: 1542 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1543 "found otp image ie (%zd B)\n", 1544 ie_len); 1545 1546 fw_file->otp_data = data; 1547 fw_file->otp_len = ie_len; 1548 1549 break; 1550 case ATH10K_FW_IE_WMI_OP_VERSION: 1551 if (ie_len != sizeof(u32)) 1552 break; 1553 1554 version = (__le32 *)data; 1555 1556 fw_file->wmi_op_version = le32_to_cpup(version); 1557 1558 ath10k_dbg(ar, ATH10K_DBG_BOOT, "found fw ie wmi op version %d\n", 1559 fw_file->wmi_op_version); 1560 break; 1561 case ATH10K_FW_IE_HTT_OP_VERSION: 1562 if (ie_len != sizeof(u32)) 1563 break; 1564 1565 version = (__le32 *)data; 1566 1567 fw_file->htt_op_version = le32_to_cpup(version); 1568 1569 ath10k_dbg(ar, ATH10K_DBG_BOOT, "found fw ie htt op version %d\n", 1570 fw_file->htt_op_version); 1571 break; 1572 case ATH10K_FW_IE_FW_CODE_SWAP_IMAGE: 1573 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1574 "found fw code swap image ie (%zd B)\n", 1575 ie_len); 1576 fw_file->codeswap_data = data; 1577 fw_file->codeswap_len = ie_len; 1578 break; 1579 default: 1580 ath10k_warn(ar, "Unknown FW IE: %u\n", 1581 le32_to_cpu(hdr->id)); 1582 break; 1583 } 1584 1585 /* jump over the padding */ 1586 ie_len = ALIGN(ie_len, 4); 1587 1588 len -= ie_len; 1589 data += ie_len; 1590 } 1591 1592 if (!test_bit(ATH10K_FW_FEATURE_NON_BMI, fw_file->fw_features) && 1593 (!fw_file->firmware_data || !fw_file->firmware_len)) { 1594 ath10k_warn(ar, "No ATH10K_FW_IE_FW_IMAGE found from '%s/%s', skipping\n", 1595 ar->hw_params.fw.dir, name); 1596 ret = -ENOMEDIUM; 1597 goto err; 1598 } 1599 1600 return 0; 1601 1602 err: 1603 ath10k_core_free_firmware_files(ar); 1604 return ret; 1605 } 1606 1607 static void ath10k_core_get_fw_name(struct ath10k *ar, char *fw_name, 1608 size_t fw_name_len, int fw_api) 1609 { 1610 switch (ar->hif.bus) { 1611 case ATH10K_BUS_SDIO: 1612 case ATH10K_BUS_USB: 1613 scnprintf(fw_name, fw_name_len, "%s-%s-%d.bin", 1614 ATH10K_FW_FILE_BASE, ath10k_bus_str(ar->hif.bus), 1615 fw_api); 1616 break; 1617 case ATH10K_BUS_PCI: 1618 case ATH10K_BUS_AHB: 1619 case ATH10K_BUS_SNOC: 1620 scnprintf(fw_name, fw_name_len, "%s-%d.bin", 1621 ATH10K_FW_FILE_BASE, fw_api); 1622 break; 1623 } 1624 } 1625 1626 static int ath10k_core_fetch_firmware_files(struct ath10k *ar) 1627 { 1628 int ret, i; 1629 char fw_name[100]; 1630 1631 /* calibration file is optional, don't check for any errors */ 1632 ath10k_fetch_cal_file(ar); 1633 1634 for (i = ATH10K_FW_API_MAX; i >= ATH10K_FW_API_MIN; i--) { 1635 ar->fw_api = i; 1636 ath10k_dbg(ar, ATH10K_DBG_BOOT, "trying fw api %d\n", 1637 ar->fw_api); 1638 1639 ath10k_core_get_fw_name(ar, fw_name, sizeof(fw_name), ar->fw_api); 1640 ret = ath10k_core_fetch_firmware_api_n(ar, fw_name, 1641 &ar->normal_mode_fw.fw_file); 1642 if (!ret) 1643 goto success; 1644 } 1645 1646 /* we end up here if we couldn't fetch any firmware */ 1647 1648 ath10k_err(ar, "Failed to find firmware-N.bin (N between %d and %d) from %s: %d", 1649 ATH10K_FW_API_MIN, ATH10K_FW_API_MAX, ar->hw_params.fw.dir, 1650 ret); 1651 1652 return ret; 1653 1654 success: 1655 ath10k_dbg(ar, ATH10K_DBG_BOOT, "using fw api %d\n", ar->fw_api); 1656 1657 return 0; 1658 } 1659 1660 static int ath10k_core_pre_cal_download(struct ath10k *ar) 1661 { 1662 int ret; 1663 1664 ret = ath10k_download_cal_file(ar, ar->pre_cal_file); 1665 if (ret == 0) { 1666 ar->cal_mode = ATH10K_PRE_CAL_MODE_FILE; 1667 goto success; 1668 } 1669 1670 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1671 "boot did not find a pre calibration file, try DT next: %d\n", 1672 ret); 1673 1674 ret = ath10k_download_cal_dt(ar, "qcom,ath10k-pre-calibration-data"); 1675 if (ret) { 1676 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1677 "unable to load pre cal data from DT: %d\n", ret); 1678 return ret; 1679 } 1680 ar->cal_mode = ATH10K_PRE_CAL_MODE_DT; 1681 1682 success: 1683 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot using calibration mode %s\n", 1684 ath10k_cal_mode_str(ar->cal_mode)); 1685 1686 return 0; 1687 } 1688 1689 static int ath10k_core_pre_cal_config(struct ath10k *ar) 1690 { 1691 int ret; 1692 1693 ret = ath10k_core_pre_cal_download(ar); 1694 if (ret) { 1695 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1696 "failed to load pre cal data: %d\n", ret); 1697 return ret; 1698 } 1699 1700 ret = ath10k_core_get_board_id_from_otp(ar); 1701 if (ret) { 1702 ath10k_err(ar, "failed to get board id: %d\n", ret); 1703 return ret; 1704 } 1705 1706 ret = ath10k_download_and_run_otp(ar); 1707 if (ret) { 1708 ath10k_err(ar, "failed to run otp: %d\n", ret); 1709 return ret; 1710 } 1711 1712 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1713 "pre cal configuration done successfully\n"); 1714 1715 return 0; 1716 } 1717 1718 static int ath10k_download_cal_data(struct ath10k *ar) 1719 { 1720 int ret; 1721 1722 ret = ath10k_core_pre_cal_config(ar); 1723 if (ret == 0) 1724 return 0; 1725 1726 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1727 "pre cal download procedure failed, try cal file: %d\n", 1728 ret); 1729 1730 ret = ath10k_download_cal_file(ar, ar->cal_file); 1731 if (ret == 0) { 1732 ar->cal_mode = ATH10K_CAL_MODE_FILE; 1733 goto done; 1734 } 1735 1736 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1737 "boot did not find a calibration file, try DT next: %d\n", 1738 ret); 1739 1740 ret = ath10k_download_cal_dt(ar, "qcom,ath10k-calibration-data"); 1741 if (ret == 0) { 1742 ar->cal_mode = ATH10K_CAL_MODE_DT; 1743 goto done; 1744 } 1745 1746 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1747 "boot did not find DT entry, try target EEPROM next: %d\n", 1748 ret); 1749 1750 ret = ath10k_download_cal_eeprom(ar); 1751 if (ret == 0) { 1752 ar->cal_mode = ATH10K_CAL_MODE_EEPROM; 1753 goto done; 1754 } 1755 1756 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1757 "boot did not find target EEPROM entry, try OTP next: %d\n", 1758 ret); 1759 1760 ret = ath10k_download_and_run_otp(ar); 1761 if (ret) { 1762 ath10k_err(ar, "failed to run otp: %d\n", ret); 1763 return ret; 1764 } 1765 1766 ar->cal_mode = ATH10K_CAL_MODE_OTP; 1767 1768 done: 1769 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot using calibration mode %s\n", 1770 ath10k_cal_mode_str(ar->cal_mode)); 1771 return 0; 1772 } 1773 1774 static int ath10k_init_uart(struct ath10k *ar) 1775 { 1776 int ret; 1777 1778 /* 1779 * Explicitly setting UART prints to zero as target turns it on 1780 * based on scratch registers. 1781 */ 1782 ret = ath10k_bmi_write32(ar, hi_serial_enable, 0); 1783 if (ret) { 1784 ath10k_warn(ar, "could not disable UART prints (%d)\n", ret); 1785 return ret; 1786 } 1787 1788 if (!uart_print) 1789 return 0; 1790 1791 ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin, ar->hw_params.uart_pin); 1792 if (ret) { 1793 ath10k_warn(ar, "could not enable UART prints (%d)\n", ret); 1794 return ret; 1795 } 1796 1797 ret = ath10k_bmi_write32(ar, hi_serial_enable, 1); 1798 if (ret) { 1799 ath10k_warn(ar, "could not enable UART prints (%d)\n", ret); 1800 return ret; 1801 } 1802 1803 /* Set the UART baud rate to 19200. */ 1804 ret = ath10k_bmi_write32(ar, hi_desired_baud_rate, 19200); 1805 if (ret) { 1806 ath10k_warn(ar, "could not set the baud rate (%d)\n", ret); 1807 return ret; 1808 } 1809 1810 ath10k_info(ar, "UART prints enabled\n"); 1811 return 0; 1812 } 1813 1814 static int ath10k_init_hw_params(struct ath10k *ar) 1815 { 1816 const struct ath10k_hw_params *uninitialized_var(hw_params); 1817 int i; 1818 1819 for (i = 0; i < ARRAY_SIZE(ath10k_hw_params_list); i++) { 1820 hw_params = &ath10k_hw_params_list[i]; 1821 1822 if (hw_params->id == ar->target_version && 1823 hw_params->dev_id == ar->dev_id) 1824 break; 1825 } 1826 1827 if (i == ARRAY_SIZE(ath10k_hw_params_list)) { 1828 ath10k_err(ar, "Unsupported hardware version: 0x%x\n", 1829 ar->target_version); 1830 return -EINVAL; 1831 } 1832 1833 ar->hw_params = *hw_params; 1834 1835 ath10k_dbg(ar, ATH10K_DBG_BOOT, "Hardware name %s version 0x%x\n", 1836 ar->hw_params.name, ar->target_version); 1837 1838 return 0; 1839 } 1840 1841 static void ath10k_core_restart(struct work_struct *work) 1842 { 1843 struct ath10k *ar = container_of(work, struct ath10k, restart_work); 1844 int ret; 1845 1846 set_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags); 1847 1848 /* Place a barrier to make sure the compiler doesn't reorder 1849 * CRASH_FLUSH and calling other functions. 1850 */ 1851 barrier(); 1852 1853 ieee80211_stop_queues(ar->hw); 1854 ath10k_drain_tx(ar); 1855 complete(&ar->scan.started); 1856 complete(&ar->scan.completed); 1857 complete(&ar->scan.on_channel); 1858 complete(&ar->offchan_tx_completed); 1859 complete(&ar->install_key_done); 1860 complete(&ar->vdev_setup_done); 1861 complete(&ar->thermal.wmi_sync); 1862 complete(&ar->bss_survey_done); 1863 wake_up(&ar->htt.empty_tx_wq); 1864 wake_up(&ar->wmi.tx_credits_wq); 1865 wake_up(&ar->peer_mapping_wq); 1866 1867 /* TODO: We can have one instance of cancelling coverage_class_work by 1868 * moving it to ath10k_halt(), so that both stop() and restart() would 1869 * call that but it takes conf_mutex() and if we call cancel_work_sync() 1870 * with conf_mutex it will deadlock. 1871 */ 1872 cancel_work_sync(&ar->set_coverage_class_work); 1873 1874 mutex_lock(&ar->conf_mutex); 1875 1876 switch (ar->state) { 1877 case ATH10K_STATE_ON: 1878 ar->state = ATH10K_STATE_RESTARTING; 1879 ath10k_halt(ar); 1880 ath10k_scan_finish(ar); 1881 ieee80211_restart_hw(ar->hw); 1882 break; 1883 case ATH10K_STATE_OFF: 1884 /* this can happen if driver is being unloaded 1885 * or if the crash happens during FW probing 1886 */ 1887 ath10k_warn(ar, "cannot restart a device that hasn't been started\n"); 1888 break; 1889 case ATH10K_STATE_RESTARTING: 1890 /* hw restart might be requested from multiple places */ 1891 break; 1892 case ATH10K_STATE_RESTARTED: 1893 ar->state = ATH10K_STATE_WEDGED; 1894 /* fall through */ 1895 case ATH10K_STATE_WEDGED: 1896 ath10k_warn(ar, "device is wedged, will not restart\n"); 1897 break; 1898 case ATH10K_STATE_UTF: 1899 ath10k_warn(ar, "firmware restart in UTF mode not supported\n"); 1900 break; 1901 } 1902 1903 mutex_unlock(&ar->conf_mutex); 1904 1905 ret = ath10k_coredump_submit(ar); 1906 if (ret) 1907 ath10k_warn(ar, "failed to send firmware crash dump via devcoredump: %d", 1908 ret); 1909 } 1910 1911 static void ath10k_core_set_coverage_class_work(struct work_struct *work) 1912 { 1913 struct ath10k *ar = container_of(work, struct ath10k, 1914 set_coverage_class_work); 1915 1916 if (ar->hw_params.hw_ops->set_coverage_class) 1917 ar->hw_params.hw_ops->set_coverage_class(ar, -1); 1918 } 1919 1920 static int ath10k_core_init_firmware_features(struct ath10k *ar) 1921 { 1922 struct ath10k_fw_file *fw_file = &ar->normal_mode_fw.fw_file; 1923 1924 if (test_bit(ATH10K_FW_FEATURE_WMI_10_2, fw_file->fw_features) && 1925 !test_bit(ATH10K_FW_FEATURE_WMI_10X, fw_file->fw_features)) { 1926 ath10k_err(ar, "feature bits corrupted: 10.2 feature requires 10.x feature to be set as well"); 1927 return -EINVAL; 1928 } 1929 1930 if (fw_file->wmi_op_version >= ATH10K_FW_WMI_OP_VERSION_MAX) { 1931 ath10k_err(ar, "unsupported WMI OP version (max %d): %d\n", 1932 ATH10K_FW_WMI_OP_VERSION_MAX, fw_file->wmi_op_version); 1933 return -EINVAL; 1934 } 1935 1936 ar->wmi.rx_decap_mode = ATH10K_HW_TXRX_NATIVE_WIFI; 1937 switch (ath10k_cryptmode_param) { 1938 case ATH10K_CRYPT_MODE_HW: 1939 clear_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags); 1940 clear_bit(ATH10K_FLAG_HW_CRYPTO_DISABLED, &ar->dev_flags); 1941 break; 1942 case ATH10K_CRYPT_MODE_SW: 1943 if (!test_bit(ATH10K_FW_FEATURE_RAW_MODE_SUPPORT, 1944 fw_file->fw_features)) { 1945 ath10k_err(ar, "cryptmode > 0 requires raw mode support from firmware"); 1946 return -EINVAL; 1947 } 1948 1949 set_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags); 1950 set_bit(ATH10K_FLAG_HW_CRYPTO_DISABLED, &ar->dev_flags); 1951 break; 1952 default: 1953 ath10k_info(ar, "invalid cryptmode: %d\n", 1954 ath10k_cryptmode_param); 1955 return -EINVAL; 1956 } 1957 1958 ar->htt.max_num_amsdu = ATH10K_HTT_MAX_NUM_AMSDU_DEFAULT; 1959 ar->htt.max_num_ampdu = ATH10K_HTT_MAX_NUM_AMPDU_DEFAULT; 1960 1961 if (rawmode) { 1962 if (!test_bit(ATH10K_FW_FEATURE_RAW_MODE_SUPPORT, 1963 fw_file->fw_features)) { 1964 ath10k_err(ar, "rawmode = 1 requires support from firmware"); 1965 return -EINVAL; 1966 } 1967 set_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags); 1968 } 1969 1970 if (test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) { 1971 ar->wmi.rx_decap_mode = ATH10K_HW_TXRX_RAW; 1972 1973 /* Workaround: 1974 * 1975 * Firmware A-MSDU aggregation breaks with RAW Tx encap mode 1976 * and causes enormous performance issues (malformed frames, 1977 * etc). 1978 * 1979 * Disabling A-MSDU makes RAW mode stable with heavy traffic 1980 * albeit a bit slower compared to regular operation. 1981 */ 1982 ar->htt.max_num_amsdu = 1; 1983 } 1984 1985 /* Backwards compatibility for firmwares without 1986 * ATH10K_FW_IE_WMI_OP_VERSION. 1987 */ 1988 if (fw_file->wmi_op_version == ATH10K_FW_WMI_OP_VERSION_UNSET) { 1989 if (test_bit(ATH10K_FW_FEATURE_WMI_10X, fw_file->fw_features)) { 1990 if (test_bit(ATH10K_FW_FEATURE_WMI_10_2, 1991 fw_file->fw_features)) 1992 fw_file->wmi_op_version = ATH10K_FW_WMI_OP_VERSION_10_2; 1993 else 1994 fw_file->wmi_op_version = ATH10K_FW_WMI_OP_VERSION_10_1; 1995 } else { 1996 fw_file->wmi_op_version = ATH10K_FW_WMI_OP_VERSION_MAIN; 1997 } 1998 } 1999 2000 switch (fw_file->wmi_op_version) { 2001 case ATH10K_FW_WMI_OP_VERSION_MAIN: 2002 ar->max_num_peers = TARGET_NUM_PEERS; 2003 ar->max_num_stations = TARGET_NUM_STATIONS; 2004 ar->max_num_vdevs = TARGET_NUM_VDEVS; 2005 ar->htt.max_num_pending_tx = TARGET_NUM_MSDU_DESC; 2006 ar->fw_stats_req_mask = WMI_STAT_PDEV | WMI_STAT_VDEV | 2007 WMI_STAT_PEER; 2008 ar->max_spatial_stream = WMI_MAX_SPATIAL_STREAM; 2009 break; 2010 case ATH10K_FW_WMI_OP_VERSION_10_1: 2011 case ATH10K_FW_WMI_OP_VERSION_10_2: 2012 case ATH10K_FW_WMI_OP_VERSION_10_2_4: 2013 if (ath10k_peer_stats_enabled(ar)) { 2014 ar->max_num_peers = TARGET_10X_TX_STATS_NUM_PEERS; 2015 ar->max_num_stations = TARGET_10X_TX_STATS_NUM_STATIONS; 2016 } else { 2017 ar->max_num_peers = TARGET_10X_NUM_PEERS; 2018 ar->max_num_stations = TARGET_10X_NUM_STATIONS; 2019 } 2020 ar->max_num_vdevs = TARGET_10X_NUM_VDEVS; 2021 ar->htt.max_num_pending_tx = TARGET_10X_NUM_MSDU_DESC; 2022 ar->fw_stats_req_mask = WMI_STAT_PEER; 2023 ar->max_spatial_stream = WMI_MAX_SPATIAL_STREAM; 2024 break; 2025 case ATH10K_FW_WMI_OP_VERSION_TLV: 2026 ar->max_num_peers = TARGET_TLV_NUM_PEERS; 2027 ar->max_num_stations = TARGET_TLV_NUM_STATIONS; 2028 ar->max_num_vdevs = TARGET_TLV_NUM_VDEVS; 2029 ar->max_num_tdls_vdevs = TARGET_TLV_NUM_TDLS_VDEVS; 2030 ar->htt.max_num_pending_tx = TARGET_TLV_NUM_MSDU_DESC; 2031 ar->wow.max_num_patterns = TARGET_TLV_NUM_WOW_PATTERNS; 2032 ar->fw_stats_req_mask = WMI_STAT_PDEV | WMI_STAT_VDEV | 2033 WMI_STAT_PEER; 2034 ar->max_spatial_stream = WMI_MAX_SPATIAL_STREAM; 2035 break; 2036 case ATH10K_FW_WMI_OP_VERSION_10_4: 2037 ar->max_num_peers = TARGET_10_4_NUM_PEERS; 2038 ar->max_num_stations = TARGET_10_4_NUM_STATIONS; 2039 ar->num_active_peers = TARGET_10_4_ACTIVE_PEERS; 2040 ar->max_num_vdevs = TARGET_10_4_NUM_VDEVS; 2041 ar->num_tids = TARGET_10_4_TGT_NUM_TIDS; 2042 ar->fw_stats_req_mask = WMI_10_4_STAT_PEER | 2043 WMI_10_4_STAT_PEER_EXTD; 2044 ar->max_spatial_stream = ar->hw_params.max_spatial_stream; 2045 ar->max_num_tdls_vdevs = TARGET_10_4_NUM_TDLS_VDEVS; 2046 2047 if (test_bit(ATH10K_FW_FEATURE_PEER_FLOW_CONTROL, 2048 fw_file->fw_features)) 2049 ar->htt.max_num_pending_tx = TARGET_10_4_NUM_MSDU_DESC_PFC; 2050 else 2051 ar->htt.max_num_pending_tx = TARGET_10_4_NUM_MSDU_DESC; 2052 break; 2053 case ATH10K_FW_WMI_OP_VERSION_UNSET: 2054 case ATH10K_FW_WMI_OP_VERSION_MAX: 2055 WARN_ON(1); 2056 return -EINVAL; 2057 } 2058 2059 /* Backwards compatibility for firmwares without 2060 * ATH10K_FW_IE_HTT_OP_VERSION. 2061 */ 2062 if (fw_file->htt_op_version == ATH10K_FW_HTT_OP_VERSION_UNSET) { 2063 switch (fw_file->wmi_op_version) { 2064 case ATH10K_FW_WMI_OP_VERSION_MAIN: 2065 fw_file->htt_op_version = ATH10K_FW_HTT_OP_VERSION_MAIN; 2066 break; 2067 case ATH10K_FW_WMI_OP_VERSION_10_1: 2068 case ATH10K_FW_WMI_OP_VERSION_10_2: 2069 case ATH10K_FW_WMI_OP_VERSION_10_2_4: 2070 fw_file->htt_op_version = ATH10K_FW_HTT_OP_VERSION_10_1; 2071 break; 2072 case ATH10K_FW_WMI_OP_VERSION_TLV: 2073 fw_file->htt_op_version = ATH10K_FW_HTT_OP_VERSION_TLV; 2074 break; 2075 case ATH10K_FW_WMI_OP_VERSION_10_4: 2076 case ATH10K_FW_WMI_OP_VERSION_UNSET: 2077 case ATH10K_FW_WMI_OP_VERSION_MAX: 2078 ath10k_err(ar, "htt op version not found from fw meta data"); 2079 return -EINVAL; 2080 } 2081 } 2082 2083 return 0; 2084 } 2085 2086 static int ath10k_core_reset_rx_filter(struct ath10k *ar) 2087 { 2088 int ret; 2089 int vdev_id; 2090 int vdev_type; 2091 int vdev_subtype; 2092 const u8 *vdev_addr; 2093 2094 vdev_id = 0; 2095 vdev_type = WMI_VDEV_TYPE_STA; 2096 vdev_subtype = ath10k_wmi_get_vdev_subtype(ar, WMI_VDEV_SUBTYPE_NONE); 2097 vdev_addr = ar->mac_addr; 2098 2099 ret = ath10k_wmi_vdev_create(ar, vdev_id, vdev_type, vdev_subtype, 2100 vdev_addr); 2101 if (ret) { 2102 ath10k_err(ar, "failed to create dummy vdev: %d\n", ret); 2103 return ret; 2104 } 2105 2106 ret = ath10k_wmi_vdev_delete(ar, vdev_id); 2107 if (ret) { 2108 ath10k_err(ar, "failed to delete dummy vdev: %d\n", ret); 2109 return ret; 2110 } 2111 2112 /* WMI and HTT may use separate HIF pipes and are not guaranteed to be 2113 * serialized properly implicitly. 2114 * 2115 * Moreover (most) WMI commands have no explicit acknowledges. It is 2116 * possible to infer it implicitly by poking firmware with echo 2117 * command - getting a reply means all preceding comments have been 2118 * (mostly) processed. 2119 * 2120 * In case of vdev create/delete this is sufficient. 2121 * 2122 * Without this it's possible to end up with a race when HTT Rx ring is 2123 * started before vdev create/delete hack is complete allowing a short 2124 * window of opportunity to receive (and Tx ACK) a bunch of frames. 2125 */ 2126 ret = ath10k_wmi_barrier(ar); 2127 if (ret) { 2128 ath10k_err(ar, "failed to ping firmware: %d\n", ret); 2129 return ret; 2130 } 2131 2132 return 0; 2133 } 2134 2135 int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode, 2136 const struct ath10k_fw_components *fw) 2137 { 2138 int status; 2139 u32 val; 2140 2141 lockdep_assert_held(&ar->conf_mutex); 2142 2143 clear_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags); 2144 2145 ar->running_fw = fw; 2146 2147 if (!test_bit(ATH10K_FW_FEATURE_NON_BMI, 2148 ar->running_fw->fw_file.fw_features)) { 2149 ath10k_bmi_start(ar); 2150 2151 if (ath10k_init_configure_target(ar)) { 2152 status = -EINVAL; 2153 goto err; 2154 } 2155 2156 status = ath10k_download_cal_data(ar); 2157 if (status) 2158 goto err; 2159 2160 /* Some of of qca988x solutions are having global reset issue 2161 * during target initialization. Bypassing PLL setting before 2162 * downloading firmware and letting the SoC run on REF_CLK is 2163 * fixing the problem. Corresponding firmware change is also 2164 * needed to set the clock source once the target is 2165 * initialized. 2166 */ 2167 if (test_bit(ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT, 2168 ar->running_fw->fw_file.fw_features)) { 2169 status = ath10k_bmi_write32(ar, hi_skip_clock_init, 1); 2170 if (status) { 2171 ath10k_err(ar, "could not write to skip_clock_init: %d\n", 2172 status); 2173 goto err; 2174 } 2175 } 2176 2177 status = ath10k_download_fw(ar); 2178 if (status) 2179 goto err; 2180 2181 status = ath10k_init_uart(ar); 2182 if (status) 2183 goto err; 2184 2185 if (ar->hif.bus == ATH10K_BUS_SDIO) 2186 ath10k_init_sdio(ar); 2187 } 2188 2189 ar->htc.htc_ops.target_send_suspend_complete = 2190 ath10k_send_suspend_complete; 2191 2192 status = ath10k_htc_init(ar); 2193 if (status) { 2194 ath10k_err(ar, "could not init HTC (%d)\n", status); 2195 goto err; 2196 } 2197 2198 if (!test_bit(ATH10K_FW_FEATURE_NON_BMI, 2199 ar->running_fw->fw_file.fw_features)) { 2200 status = ath10k_bmi_done(ar); 2201 if (status) 2202 goto err; 2203 } 2204 2205 status = ath10k_wmi_attach(ar); 2206 if (status) { 2207 ath10k_err(ar, "WMI attach failed: %d\n", status); 2208 goto err; 2209 } 2210 2211 status = ath10k_htt_init(ar); 2212 if (status) { 2213 ath10k_err(ar, "failed to init htt: %d\n", status); 2214 goto err_wmi_detach; 2215 } 2216 2217 status = ath10k_htt_tx_start(&ar->htt); 2218 if (status) { 2219 ath10k_err(ar, "failed to alloc htt tx: %d\n", status); 2220 goto err_wmi_detach; 2221 } 2222 2223 /* If firmware indicates Full Rx Reorder support it must be used in a 2224 * slightly different manner. Let HTT code know. 2225 */ 2226 ar->htt.rx_ring.in_ord_rx = !!(test_bit(WMI_SERVICE_RX_FULL_REORDER, 2227 ar->wmi.svc_map)); 2228 2229 status = ath10k_htt_rx_alloc(&ar->htt); 2230 if (status) { 2231 ath10k_err(ar, "failed to alloc htt rx: %d\n", status); 2232 goto err_htt_tx_detach; 2233 } 2234 2235 status = ath10k_hif_start(ar); 2236 if (status) { 2237 ath10k_err(ar, "could not start HIF: %d\n", status); 2238 goto err_htt_rx_detach; 2239 } 2240 2241 status = ath10k_htc_wait_target(&ar->htc); 2242 if (status) { 2243 ath10k_err(ar, "failed to connect to HTC: %d\n", status); 2244 goto err_hif_stop; 2245 } 2246 2247 if (mode == ATH10K_FIRMWARE_MODE_NORMAL) { 2248 status = ath10k_htt_connect(&ar->htt); 2249 if (status) { 2250 ath10k_err(ar, "failed to connect htt (%d)\n", status); 2251 goto err_hif_stop; 2252 } 2253 } 2254 2255 status = ath10k_wmi_connect(ar); 2256 if (status) { 2257 ath10k_err(ar, "could not connect wmi: %d\n", status); 2258 goto err_hif_stop; 2259 } 2260 2261 status = ath10k_htc_start(&ar->htc); 2262 if (status) { 2263 ath10k_err(ar, "failed to start htc: %d\n", status); 2264 goto err_hif_stop; 2265 } 2266 2267 if (mode == ATH10K_FIRMWARE_MODE_NORMAL) { 2268 status = ath10k_wmi_wait_for_service_ready(ar); 2269 if (status) { 2270 ath10k_warn(ar, "wmi service ready event not received"); 2271 goto err_hif_stop; 2272 } 2273 } 2274 2275 ath10k_dbg(ar, ATH10K_DBG_BOOT, "firmware %s booted\n", 2276 ar->hw->wiphy->fw_version); 2277 2278 if (test_bit(WMI_SERVICE_EXT_RES_CFG_SUPPORT, ar->wmi.svc_map) && 2279 mode == ATH10K_FIRMWARE_MODE_NORMAL) { 2280 val = 0; 2281 if (ath10k_peer_stats_enabled(ar)) 2282 val = WMI_10_4_PEER_STATS; 2283 2284 if (test_bit(WMI_SERVICE_BSS_CHANNEL_INFO_64, ar->wmi.svc_map)) 2285 val |= WMI_10_4_BSS_CHANNEL_INFO_64; 2286 2287 /* 10.4 firmware supports BT-Coex without reloading firmware 2288 * via pdev param. To support Bluetooth coexistence pdev param, 2289 * WMI_COEX_GPIO_SUPPORT of extended resource config should be 2290 * enabled always. 2291 */ 2292 if (test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map) && 2293 test_bit(ATH10K_FW_FEATURE_BTCOEX_PARAM, 2294 ar->running_fw->fw_file.fw_features)) 2295 val |= WMI_10_4_COEX_GPIO_SUPPORT; 2296 2297 if (test_bit(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 2298 ar->wmi.svc_map)) 2299 val |= WMI_10_4_TDLS_EXPLICIT_MODE_ONLY; 2300 2301 if (test_bit(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, 2302 ar->wmi.svc_map)) 2303 val |= WMI_10_4_TDLS_UAPSD_BUFFER_STA; 2304 2305 status = ath10k_mac_ext_resource_config(ar, val); 2306 if (status) { 2307 ath10k_err(ar, 2308 "failed to send ext resource cfg command : %d\n", 2309 status); 2310 goto err_hif_stop; 2311 } 2312 } 2313 2314 status = ath10k_wmi_cmd_init(ar); 2315 if (status) { 2316 ath10k_err(ar, "could not send WMI init command (%d)\n", 2317 status); 2318 goto err_hif_stop; 2319 } 2320 2321 status = ath10k_wmi_wait_for_unified_ready(ar); 2322 if (status) { 2323 ath10k_err(ar, "wmi unified ready event not received\n"); 2324 goto err_hif_stop; 2325 } 2326 2327 /* Some firmware revisions do not properly set up hardware rx filter 2328 * registers. 2329 * 2330 * A known example from QCA9880 and 10.2.4 is that MAC_PCU_ADDR1_MASK 2331 * is filled with 0s instead of 1s allowing HW to respond with ACKs to 2332 * any frames that matches MAC_PCU_RX_FILTER which is also 2333 * misconfigured to accept anything. 2334 * 2335 * The ADDR1 is programmed using internal firmware structure field and 2336 * can't be (easily/sanely) reached from the driver explicitly. It is 2337 * possible to implicitly make it correct by creating a dummy vdev and 2338 * then deleting it. 2339 */ 2340 if (mode == ATH10K_FIRMWARE_MODE_NORMAL) { 2341 status = ath10k_core_reset_rx_filter(ar); 2342 if (status) { 2343 ath10k_err(ar, 2344 "failed to reset rx filter: %d\n", status); 2345 goto err_hif_stop; 2346 } 2347 } 2348 2349 status = ath10k_htt_rx_ring_refill(ar); 2350 if (status) { 2351 ath10k_err(ar, "failed to refill htt rx ring: %d\n", status); 2352 goto err_hif_stop; 2353 } 2354 2355 if (ar->max_num_vdevs >= 64) 2356 ar->free_vdev_map = 0xFFFFFFFFFFFFFFFFLL; 2357 else 2358 ar->free_vdev_map = (1LL << ar->max_num_vdevs) - 1; 2359 2360 INIT_LIST_HEAD(&ar->arvifs); 2361 2362 /* we don't care about HTT in UTF mode */ 2363 if (mode == ATH10K_FIRMWARE_MODE_NORMAL) { 2364 status = ath10k_htt_setup(&ar->htt); 2365 if (status) { 2366 ath10k_err(ar, "failed to setup htt: %d\n", status); 2367 goto err_hif_stop; 2368 } 2369 } 2370 2371 status = ath10k_debug_start(ar); 2372 if (status) 2373 goto err_hif_stop; 2374 2375 return 0; 2376 2377 err_hif_stop: 2378 ath10k_hif_stop(ar); 2379 err_htt_rx_detach: 2380 ath10k_htt_rx_free(&ar->htt); 2381 err_htt_tx_detach: 2382 ath10k_htt_tx_free(&ar->htt); 2383 err_wmi_detach: 2384 ath10k_wmi_detach(ar); 2385 err: 2386 return status; 2387 } 2388 EXPORT_SYMBOL(ath10k_core_start); 2389 2390 int ath10k_wait_for_suspend(struct ath10k *ar, u32 suspend_opt) 2391 { 2392 int ret; 2393 unsigned long time_left; 2394 2395 reinit_completion(&ar->target_suspend); 2396 2397 ret = ath10k_wmi_pdev_suspend_target(ar, suspend_opt); 2398 if (ret) { 2399 ath10k_warn(ar, "could not suspend target (%d)\n", ret); 2400 return ret; 2401 } 2402 2403 time_left = wait_for_completion_timeout(&ar->target_suspend, 1 * HZ); 2404 2405 if (!time_left) { 2406 ath10k_warn(ar, "suspend timed out - target pause event never came\n"); 2407 return -ETIMEDOUT; 2408 } 2409 2410 return 0; 2411 } 2412 2413 void ath10k_core_stop(struct ath10k *ar) 2414 { 2415 lockdep_assert_held(&ar->conf_mutex); 2416 ath10k_debug_stop(ar); 2417 2418 /* try to suspend target */ 2419 if (ar->state != ATH10K_STATE_RESTARTING && 2420 ar->state != ATH10K_STATE_UTF) 2421 ath10k_wait_for_suspend(ar, WMI_PDEV_SUSPEND_AND_DISABLE_INTR); 2422 2423 ath10k_hif_stop(ar); 2424 ath10k_htt_tx_stop(&ar->htt); 2425 ath10k_htt_rx_free(&ar->htt); 2426 ath10k_wmi_detach(ar); 2427 } 2428 EXPORT_SYMBOL(ath10k_core_stop); 2429 2430 /* mac80211 manages fw/hw initialization through start/stop hooks. However in 2431 * order to know what hw capabilities should be advertised to mac80211 it is 2432 * necessary to load the firmware (and tear it down immediately since start 2433 * hook will try to init it again) before registering 2434 */ 2435 static int ath10k_core_probe_fw(struct ath10k *ar) 2436 { 2437 struct bmi_target_info target_info; 2438 int ret = 0; 2439 2440 ret = ath10k_hif_power_up(ar); 2441 if (ret) { 2442 ath10k_err(ar, "could not start pci hif (%d)\n", ret); 2443 return ret; 2444 } 2445 2446 switch (ar->hif.bus) { 2447 case ATH10K_BUS_SDIO: 2448 memset(&target_info, 0, sizeof(target_info)); 2449 ret = ath10k_bmi_get_target_info_sdio(ar, &target_info); 2450 if (ret) { 2451 ath10k_err(ar, "could not get target info (%d)\n", ret); 2452 goto err_power_down; 2453 } 2454 ar->target_version = target_info.version; 2455 ar->hw->wiphy->hw_version = target_info.version; 2456 break; 2457 case ATH10K_BUS_PCI: 2458 case ATH10K_BUS_AHB: 2459 case ATH10K_BUS_USB: 2460 memset(&target_info, 0, sizeof(target_info)); 2461 ret = ath10k_bmi_get_target_info(ar, &target_info); 2462 if (ret) { 2463 ath10k_err(ar, "could not get target info (%d)\n", ret); 2464 goto err_power_down; 2465 } 2466 ar->target_version = target_info.version; 2467 ar->hw->wiphy->hw_version = target_info.version; 2468 break; 2469 case ATH10K_BUS_SNOC: 2470 break; 2471 default: 2472 ath10k_err(ar, "incorrect hif bus type: %d\n", ar->hif.bus); 2473 } 2474 2475 ret = ath10k_init_hw_params(ar); 2476 if (ret) { 2477 ath10k_err(ar, "could not get hw params (%d)\n", ret); 2478 goto err_power_down; 2479 } 2480 2481 ret = ath10k_core_fetch_firmware_files(ar); 2482 if (ret) { 2483 ath10k_err(ar, "could not fetch firmware files (%d)\n", ret); 2484 goto err_power_down; 2485 } 2486 2487 BUILD_BUG_ON(sizeof(ar->hw->wiphy->fw_version) != 2488 sizeof(ar->normal_mode_fw.fw_file.fw_version)); 2489 memcpy(ar->hw->wiphy->fw_version, ar->normal_mode_fw.fw_file.fw_version, 2490 sizeof(ar->hw->wiphy->fw_version)); 2491 2492 ath10k_debug_print_hwfw_info(ar); 2493 2494 if (!test_bit(ATH10K_FW_FEATURE_NON_BMI, 2495 ar->normal_mode_fw.fw_file.fw_features)) { 2496 ret = ath10k_core_pre_cal_download(ar); 2497 if (ret) { 2498 /* pre calibration data download is not necessary 2499 * for all the chipsets. Ignore failures and continue. 2500 */ 2501 ath10k_dbg(ar, ATH10K_DBG_BOOT, 2502 "could not load pre cal data: %d\n", ret); 2503 } 2504 2505 ret = ath10k_core_get_board_id_from_otp(ar); 2506 if (ret && ret != -EOPNOTSUPP) { 2507 ath10k_err(ar, "failed to get board id from otp: %d\n", 2508 ret); 2509 goto err_free_firmware_files; 2510 } 2511 2512 ret = ath10k_core_check_smbios(ar); 2513 if (ret) 2514 ath10k_dbg(ar, ATH10K_DBG_BOOT, "SMBIOS bdf variant name not set.\n"); 2515 2516 ret = ath10k_core_check_dt(ar); 2517 if (ret) 2518 ath10k_dbg(ar, ATH10K_DBG_BOOT, "DT bdf variant name not set.\n"); 2519 2520 ret = ath10k_core_fetch_board_file(ar); 2521 if (ret) { 2522 ath10k_err(ar, "failed to fetch board file: %d\n", ret); 2523 goto err_free_firmware_files; 2524 } 2525 2526 ath10k_debug_print_board_info(ar); 2527 } 2528 2529 ret = ath10k_core_init_firmware_features(ar); 2530 if (ret) { 2531 ath10k_err(ar, "fatal problem with firmware features: %d\n", 2532 ret); 2533 goto err_free_firmware_files; 2534 } 2535 2536 if (!test_bit(ATH10K_FW_FEATURE_NON_BMI, 2537 ar->normal_mode_fw.fw_file.fw_features)) { 2538 ret = ath10k_swap_code_seg_init(ar, 2539 &ar->normal_mode_fw.fw_file); 2540 if (ret) { 2541 ath10k_err(ar, "failed to initialize code swap segment: %d\n", 2542 ret); 2543 goto err_free_firmware_files; 2544 } 2545 } 2546 2547 mutex_lock(&ar->conf_mutex); 2548 2549 ret = ath10k_core_start(ar, ATH10K_FIRMWARE_MODE_NORMAL, 2550 &ar->normal_mode_fw); 2551 if (ret) { 2552 ath10k_err(ar, "could not init core (%d)\n", ret); 2553 goto err_unlock; 2554 } 2555 2556 ath10k_debug_print_boot_info(ar); 2557 ath10k_core_stop(ar); 2558 2559 mutex_unlock(&ar->conf_mutex); 2560 2561 ath10k_hif_power_down(ar); 2562 return 0; 2563 2564 err_unlock: 2565 mutex_unlock(&ar->conf_mutex); 2566 2567 err_free_firmware_files: 2568 ath10k_core_free_firmware_files(ar); 2569 2570 err_power_down: 2571 ath10k_hif_power_down(ar); 2572 2573 return ret; 2574 } 2575 2576 static void ath10k_core_register_work(struct work_struct *work) 2577 { 2578 struct ath10k *ar = container_of(work, struct ath10k, register_work); 2579 int status; 2580 2581 /* peer stats are enabled by default */ 2582 set_bit(ATH10K_FLAG_PEER_STATS, &ar->dev_flags); 2583 2584 status = ath10k_core_probe_fw(ar); 2585 if (status) { 2586 ath10k_err(ar, "could not probe fw (%d)\n", status); 2587 goto err; 2588 } 2589 2590 status = ath10k_mac_register(ar); 2591 if (status) { 2592 ath10k_err(ar, "could not register to mac80211 (%d)\n", status); 2593 goto err_release_fw; 2594 } 2595 2596 status = ath10k_coredump_register(ar); 2597 if (status) { 2598 ath10k_err(ar, "unable to register coredump\n"); 2599 goto err_unregister_mac; 2600 } 2601 2602 status = ath10k_debug_register(ar); 2603 if (status) { 2604 ath10k_err(ar, "unable to initialize debugfs\n"); 2605 goto err_unregister_coredump; 2606 } 2607 2608 status = ath10k_spectral_create(ar); 2609 if (status) { 2610 ath10k_err(ar, "failed to initialize spectral\n"); 2611 goto err_debug_destroy; 2612 } 2613 2614 status = ath10k_thermal_register(ar); 2615 if (status) { 2616 ath10k_err(ar, "could not register thermal device: %d\n", 2617 status); 2618 goto err_spectral_destroy; 2619 } 2620 2621 set_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags); 2622 return; 2623 2624 err_spectral_destroy: 2625 ath10k_spectral_destroy(ar); 2626 err_debug_destroy: 2627 ath10k_debug_destroy(ar); 2628 err_unregister_coredump: 2629 ath10k_coredump_unregister(ar); 2630 err_unregister_mac: 2631 ath10k_mac_unregister(ar); 2632 err_release_fw: 2633 ath10k_core_free_firmware_files(ar); 2634 err: 2635 /* TODO: It's probably a good idea to release device from the driver 2636 * but calling device_release_driver() here will cause a deadlock. 2637 */ 2638 return; 2639 } 2640 2641 int ath10k_core_register(struct ath10k *ar, u32 chip_id) 2642 { 2643 ar->chip_id = chip_id; 2644 queue_work(ar->workqueue, &ar->register_work); 2645 2646 return 0; 2647 } 2648 EXPORT_SYMBOL(ath10k_core_register); 2649 2650 void ath10k_core_unregister(struct ath10k *ar) 2651 { 2652 cancel_work_sync(&ar->register_work); 2653 2654 if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags)) 2655 return; 2656 2657 ath10k_thermal_unregister(ar); 2658 /* Stop spectral before unregistering from mac80211 to remove the 2659 * relayfs debugfs file cleanly. Otherwise the parent debugfs tree 2660 * would be already be free'd recursively, leading to a double free. 2661 */ 2662 ath10k_spectral_destroy(ar); 2663 2664 /* We must unregister from mac80211 before we stop HTC and HIF. 2665 * Otherwise we will fail to submit commands to FW and mac80211 will be 2666 * unhappy about callback failures. 2667 */ 2668 ath10k_mac_unregister(ar); 2669 2670 ath10k_testmode_destroy(ar); 2671 2672 ath10k_core_free_firmware_files(ar); 2673 ath10k_core_free_board_files(ar); 2674 2675 ath10k_debug_unregister(ar); 2676 } 2677 EXPORT_SYMBOL(ath10k_core_unregister); 2678 2679 struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev, 2680 enum ath10k_bus bus, 2681 enum ath10k_hw_rev hw_rev, 2682 const struct ath10k_hif_ops *hif_ops) 2683 { 2684 struct ath10k *ar; 2685 int ret; 2686 2687 ar = ath10k_mac_create(priv_size); 2688 if (!ar) 2689 return NULL; 2690 2691 ar->ath_common.priv = ar; 2692 ar->ath_common.hw = ar->hw; 2693 ar->dev = dev; 2694 ar->hw_rev = hw_rev; 2695 ar->hif.ops = hif_ops; 2696 ar->hif.bus = bus; 2697 2698 switch (hw_rev) { 2699 case ATH10K_HW_QCA988X: 2700 case ATH10K_HW_QCA9887: 2701 ar->regs = &qca988x_regs; 2702 ar->hw_ce_regs = &qcax_ce_regs; 2703 ar->hw_values = &qca988x_values; 2704 break; 2705 case ATH10K_HW_QCA6174: 2706 case ATH10K_HW_QCA9377: 2707 ar->regs = &qca6174_regs; 2708 ar->hw_ce_regs = &qcax_ce_regs; 2709 ar->hw_values = &qca6174_values; 2710 break; 2711 case ATH10K_HW_QCA99X0: 2712 case ATH10K_HW_QCA9984: 2713 ar->regs = &qca99x0_regs; 2714 ar->hw_ce_regs = &qcax_ce_regs; 2715 ar->hw_values = &qca99x0_values; 2716 break; 2717 case ATH10K_HW_QCA9888: 2718 ar->regs = &qca99x0_regs; 2719 ar->hw_ce_regs = &qcax_ce_regs; 2720 ar->hw_values = &qca9888_values; 2721 break; 2722 case ATH10K_HW_QCA4019: 2723 ar->regs = &qca4019_regs; 2724 ar->hw_ce_regs = &qcax_ce_regs; 2725 ar->hw_values = &qca4019_values; 2726 break; 2727 case ATH10K_HW_WCN3990: 2728 ar->regs = &wcn3990_regs; 2729 ar->hw_ce_regs = &wcn3990_ce_regs; 2730 ar->hw_values = &wcn3990_values; 2731 break; 2732 default: 2733 ath10k_err(ar, "unsupported core hardware revision %d\n", 2734 hw_rev); 2735 ret = -ENOTSUPP; 2736 goto err_free_mac; 2737 } 2738 2739 init_completion(&ar->scan.started); 2740 init_completion(&ar->scan.completed); 2741 init_completion(&ar->scan.on_channel); 2742 init_completion(&ar->target_suspend); 2743 init_completion(&ar->wow.wakeup_completed); 2744 2745 init_completion(&ar->install_key_done); 2746 init_completion(&ar->vdev_setup_done); 2747 init_completion(&ar->thermal.wmi_sync); 2748 init_completion(&ar->bss_survey_done); 2749 2750 INIT_DELAYED_WORK(&ar->scan.timeout, ath10k_scan_timeout_work); 2751 2752 ar->workqueue = create_singlethread_workqueue("ath10k_wq"); 2753 if (!ar->workqueue) 2754 goto err_free_mac; 2755 2756 ar->workqueue_aux = create_singlethread_workqueue("ath10k_aux_wq"); 2757 if (!ar->workqueue_aux) 2758 goto err_free_wq; 2759 2760 mutex_init(&ar->conf_mutex); 2761 spin_lock_init(&ar->data_lock); 2762 spin_lock_init(&ar->txqs_lock); 2763 2764 INIT_LIST_HEAD(&ar->txqs); 2765 INIT_LIST_HEAD(&ar->peers); 2766 init_waitqueue_head(&ar->peer_mapping_wq); 2767 init_waitqueue_head(&ar->htt.empty_tx_wq); 2768 init_waitqueue_head(&ar->wmi.tx_credits_wq); 2769 2770 init_completion(&ar->offchan_tx_completed); 2771 INIT_WORK(&ar->offchan_tx_work, ath10k_offchan_tx_work); 2772 skb_queue_head_init(&ar->offchan_tx_queue); 2773 2774 INIT_WORK(&ar->wmi_mgmt_tx_work, ath10k_mgmt_over_wmi_tx_work); 2775 skb_queue_head_init(&ar->wmi_mgmt_tx_queue); 2776 2777 INIT_WORK(&ar->register_work, ath10k_core_register_work); 2778 INIT_WORK(&ar->restart_work, ath10k_core_restart); 2779 INIT_WORK(&ar->set_coverage_class_work, 2780 ath10k_core_set_coverage_class_work); 2781 2782 init_dummy_netdev(&ar->napi_dev); 2783 2784 ret = ath10k_coredump_create(ar); 2785 if (ret) 2786 goto err_free_aux_wq; 2787 2788 ret = ath10k_debug_create(ar); 2789 if (ret) 2790 goto err_free_coredump; 2791 2792 return ar; 2793 2794 err_free_coredump: 2795 ath10k_coredump_destroy(ar); 2796 2797 err_free_aux_wq: 2798 destroy_workqueue(ar->workqueue_aux); 2799 err_free_wq: 2800 destroy_workqueue(ar->workqueue); 2801 2802 err_free_mac: 2803 ath10k_mac_destroy(ar); 2804 2805 return NULL; 2806 } 2807 EXPORT_SYMBOL(ath10k_core_create); 2808 2809 void ath10k_core_destroy(struct ath10k *ar) 2810 { 2811 flush_workqueue(ar->workqueue); 2812 destroy_workqueue(ar->workqueue); 2813 2814 flush_workqueue(ar->workqueue_aux); 2815 destroy_workqueue(ar->workqueue_aux); 2816 2817 ath10k_debug_destroy(ar); 2818 ath10k_coredump_destroy(ar); 2819 ath10k_htt_tx_destroy(&ar->htt); 2820 ath10k_wmi_free_host_mem(ar); 2821 ath10k_mac_destroy(ar); 2822 } 2823 EXPORT_SYMBOL(ath10k_core_destroy); 2824 2825 MODULE_AUTHOR("Qualcomm Atheros"); 2826 MODULE_DESCRIPTION("Core module for Qualcomm Atheros 802.11ac wireless LAN cards."); 2827 MODULE_LICENSE("Dual BSD/GPL"); 2828