1 // SPDX-License-Identifier: ISC 2 /* 3 * Copyright (c) 2005-2011 Atheros Communications Inc. 4 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. 5 * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. 6 */ 7 8 #include <linux/module.h> 9 #include <linux/firmware.h> 10 #include <linux/of.h> 11 #include <linux/property.h> 12 #include <linux/dmi.h> 13 #include <linux/ctype.h> 14 #include <linux/pm_qos.h> 15 #include <linux/nvmem-consumer.h> 16 #include <asm/byteorder.h> 17 18 #include "core.h" 19 #include "mac.h" 20 #include "htc.h" 21 #include "hif.h" 22 #include "wmi.h" 23 #include "bmi.h" 24 #include "debug.h" 25 #include "htt.h" 26 #include "testmode.h" 27 #include "wmi-ops.h" 28 #include "coredump.h" 29 30 unsigned int ath10k_debug_mask; 31 EXPORT_SYMBOL(ath10k_debug_mask); 32 33 static unsigned int ath10k_cryptmode_param; 34 static bool uart_print; 35 static bool skip_otp; 36 static bool fw_diag_log; 37 38 /* frame mode values are mapped as per enum ath10k_hw_txrx_mode */ 39 unsigned int ath10k_frame_mode = ATH10K_HW_TXRX_NATIVE_WIFI; 40 41 unsigned long ath10k_coredump_mask = BIT(ATH10K_FW_CRASH_DUMP_REGISTERS) | 42 BIT(ATH10K_FW_CRASH_DUMP_CE_DATA); 43 44 /* FIXME: most of these should be readonly */ 45 module_param_named(debug_mask, ath10k_debug_mask, uint, 0644); 46 module_param_named(cryptmode, ath10k_cryptmode_param, uint, 0644); 47 module_param(uart_print, bool, 0644); 48 module_param(skip_otp, bool, 0644); 49 module_param(fw_diag_log, bool, 0644); 50 module_param_named(frame_mode, ath10k_frame_mode, uint, 0644); 51 module_param_named(coredump_mask, ath10k_coredump_mask, ulong, 0444); 52 53 MODULE_PARM_DESC(debug_mask, "Debugging mask"); 54 MODULE_PARM_DESC(uart_print, "Uart target debugging"); 55 MODULE_PARM_DESC(skip_otp, "Skip otp failure for calibration in testmode"); 56 MODULE_PARM_DESC(cryptmode, "Crypto mode: 0-hardware, 1-software"); 57 MODULE_PARM_DESC(frame_mode, 58 "Datapath frame mode (0: raw, 1: native wifi (default), 2: ethernet)"); 59 MODULE_PARM_DESC(coredump_mask, "Bitfield of what to include in firmware crash file"); 60 MODULE_PARM_DESC(fw_diag_log, "Diag based fw log debugging"); 61 62 static const struct ath10k_hw_params ath10k_hw_params_list[] = { 63 { 64 .id = QCA988X_HW_2_0_VERSION, 65 .dev_id = QCA988X_2_0_DEVICE_ID, 66 .bus = ATH10K_BUS_PCI, 67 .name = "qca988x hw2.0", 68 .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR, 69 .uart_pin = 7, 70 .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, 71 .otp_exe_param = 0, 72 .channel_counters_freq_hz = 88000, 73 .max_probe_resp_desc_thres = 0, 74 .cal_data_len = 2116, 75 .fw = { 76 .dir = QCA988X_HW_2_0_FW_DIR, 77 .board = QCA988X_HW_2_0_BOARD_DATA_FILE, 78 .board_size = QCA988X_BOARD_DATA_SZ, 79 .board_ext_size = QCA988X_BOARD_EXT_DATA_SZ, 80 }, 81 .rx_desc_ops = &qca988x_rx_desc_ops, 82 .hw_ops = &qca988x_ops, 83 .decap_align_bytes = 4, 84 .spectral_bin_discard = 0, 85 .spectral_bin_offset = 0, 86 .vht160_mcs_rx_highest = 0, 87 .vht160_mcs_tx_highest = 0, 88 .n_cipher_suites = 8, 89 .ast_skid_limit = 0x10, 90 .num_wds_entries = 0x20, 91 .target_64bit = false, 92 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 93 .shadow_reg_support = false, 94 .rri_on_ddr = false, 95 .hw_filter_reset_required = true, 96 .fw_diag_ce_download = false, 97 .credit_size_workaround = false, 98 .tx_stats_over_pktlog = true, 99 .dynamic_sar_support = false, 100 .hw_restart_disconnect = false, 101 .use_fw_tx_credits = true, 102 .delay_unmap_buffer = false, 103 }, 104 { 105 .id = QCA988X_HW_2_0_VERSION, 106 .dev_id = QCA988X_2_0_DEVICE_ID_UBNT, 107 .name = "qca988x hw2.0 ubiquiti", 108 .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR, 109 .uart_pin = 7, 110 .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, 111 .otp_exe_param = 0, 112 .channel_counters_freq_hz = 88000, 113 .max_probe_resp_desc_thres = 0, 114 .cal_data_len = 2116, 115 .fw = { 116 .dir = QCA988X_HW_2_0_FW_DIR, 117 .board = QCA988X_HW_2_0_BOARD_DATA_FILE, 118 .board_size = QCA988X_BOARD_DATA_SZ, 119 .board_ext_size = QCA988X_BOARD_EXT_DATA_SZ, 120 }, 121 .rx_desc_ops = &qca988x_rx_desc_ops, 122 .hw_ops = &qca988x_ops, 123 .decap_align_bytes = 4, 124 .spectral_bin_discard = 0, 125 .spectral_bin_offset = 0, 126 .vht160_mcs_rx_highest = 0, 127 .vht160_mcs_tx_highest = 0, 128 .n_cipher_suites = 8, 129 .ast_skid_limit = 0x10, 130 .num_wds_entries = 0x20, 131 .target_64bit = false, 132 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 133 .shadow_reg_support = false, 134 .rri_on_ddr = false, 135 .hw_filter_reset_required = true, 136 .fw_diag_ce_download = false, 137 .credit_size_workaround = false, 138 .tx_stats_over_pktlog = true, 139 .dynamic_sar_support = false, 140 .hw_restart_disconnect = false, 141 .use_fw_tx_credits = true, 142 .delay_unmap_buffer = false, 143 }, 144 { 145 .id = QCA9887_HW_1_0_VERSION, 146 .dev_id = QCA9887_1_0_DEVICE_ID, 147 .bus = ATH10K_BUS_PCI, 148 .name = "qca9887 hw1.0", 149 .patch_load_addr = QCA9887_HW_1_0_PATCH_LOAD_ADDR, 150 .uart_pin = 7, 151 .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, 152 .otp_exe_param = 0, 153 .channel_counters_freq_hz = 88000, 154 .max_probe_resp_desc_thres = 0, 155 .cal_data_len = 2116, 156 .fw = { 157 .dir = QCA9887_HW_1_0_FW_DIR, 158 .board = QCA9887_HW_1_0_BOARD_DATA_FILE, 159 .board_size = QCA9887_BOARD_DATA_SZ, 160 .board_ext_size = QCA9887_BOARD_EXT_DATA_SZ, 161 }, 162 .rx_desc_ops = &qca988x_rx_desc_ops, 163 .hw_ops = &qca988x_ops, 164 .decap_align_bytes = 4, 165 .spectral_bin_discard = 0, 166 .spectral_bin_offset = 0, 167 .vht160_mcs_rx_highest = 0, 168 .vht160_mcs_tx_highest = 0, 169 .n_cipher_suites = 8, 170 .ast_skid_limit = 0x10, 171 .num_wds_entries = 0x20, 172 .target_64bit = false, 173 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 174 .shadow_reg_support = false, 175 .rri_on_ddr = false, 176 .hw_filter_reset_required = true, 177 .fw_diag_ce_download = false, 178 .credit_size_workaround = false, 179 .tx_stats_over_pktlog = false, 180 .dynamic_sar_support = false, 181 .hw_restart_disconnect = false, 182 .use_fw_tx_credits = true, 183 .delay_unmap_buffer = false, 184 }, 185 { 186 .id = QCA6174_HW_3_2_VERSION, 187 .dev_id = QCA6174_3_2_DEVICE_ID, 188 .bus = ATH10K_BUS_SDIO, 189 .name = "qca6174 hw3.2 sdio", 190 .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR, 191 .uart_pin = 19, 192 .otp_exe_param = 0, 193 .channel_counters_freq_hz = 88000, 194 .max_probe_resp_desc_thres = 0, 195 .cal_data_len = 0, 196 .fw = { 197 .dir = QCA6174_HW_3_0_FW_DIR, 198 .board = QCA6174_HW_3_0_BOARD_DATA_FILE, 199 .board_size = QCA6174_BOARD_DATA_SZ, 200 .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ, 201 }, 202 .rx_desc_ops = &qca988x_rx_desc_ops, 203 .hw_ops = &qca6174_sdio_ops, 204 .hw_clk = qca6174_clk, 205 .target_cpu_freq = 176000000, 206 .decap_align_bytes = 4, 207 .n_cipher_suites = 8, 208 .num_peers = 10, 209 .ast_skid_limit = 0x10, 210 .num_wds_entries = 0x20, 211 .uart_pin_workaround = true, 212 .tx_stats_over_pktlog = false, 213 .credit_size_workaround = false, 214 .bmi_large_size_download = true, 215 .supports_peer_stats_info = true, 216 .dynamic_sar_support = true, 217 .hw_restart_disconnect = false, 218 .use_fw_tx_credits = true, 219 .delay_unmap_buffer = false, 220 }, 221 { 222 .id = QCA6174_HW_2_1_VERSION, 223 .dev_id = QCA6164_2_1_DEVICE_ID, 224 .bus = ATH10K_BUS_PCI, 225 .name = "qca6164 hw2.1", 226 .patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR, 227 .uart_pin = 6, 228 .otp_exe_param = 0, 229 .channel_counters_freq_hz = 88000, 230 .max_probe_resp_desc_thres = 0, 231 .cal_data_len = 8124, 232 .fw = { 233 .dir = QCA6174_HW_2_1_FW_DIR, 234 .board = QCA6174_HW_2_1_BOARD_DATA_FILE, 235 .board_size = QCA6174_BOARD_DATA_SZ, 236 .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ, 237 }, 238 .rx_desc_ops = &qca988x_rx_desc_ops, 239 .hw_ops = &qca988x_ops, 240 .decap_align_bytes = 4, 241 .spectral_bin_discard = 0, 242 .spectral_bin_offset = 0, 243 .vht160_mcs_rx_highest = 0, 244 .vht160_mcs_tx_highest = 0, 245 .n_cipher_suites = 8, 246 .ast_skid_limit = 0x10, 247 .num_wds_entries = 0x20, 248 .target_64bit = false, 249 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 250 .shadow_reg_support = false, 251 .rri_on_ddr = false, 252 .hw_filter_reset_required = true, 253 .fw_diag_ce_download = false, 254 .credit_size_workaround = false, 255 .tx_stats_over_pktlog = false, 256 .dynamic_sar_support = false, 257 .hw_restart_disconnect = false, 258 .use_fw_tx_credits = true, 259 .delay_unmap_buffer = false, 260 }, 261 { 262 .id = QCA6174_HW_2_1_VERSION, 263 .dev_id = QCA6174_2_1_DEVICE_ID, 264 .bus = ATH10K_BUS_PCI, 265 .name = "qca6174 hw2.1", 266 .patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR, 267 .uart_pin = 6, 268 .otp_exe_param = 0, 269 .channel_counters_freq_hz = 88000, 270 .max_probe_resp_desc_thres = 0, 271 .cal_data_len = 8124, 272 .fw = { 273 .dir = QCA6174_HW_2_1_FW_DIR, 274 .board = QCA6174_HW_2_1_BOARD_DATA_FILE, 275 .board_size = QCA6174_BOARD_DATA_SZ, 276 .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ, 277 }, 278 .rx_desc_ops = &qca988x_rx_desc_ops, 279 .hw_ops = &qca988x_ops, 280 .decap_align_bytes = 4, 281 .spectral_bin_discard = 0, 282 .spectral_bin_offset = 0, 283 .vht160_mcs_rx_highest = 0, 284 .vht160_mcs_tx_highest = 0, 285 .n_cipher_suites = 8, 286 .ast_skid_limit = 0x10, 287 .num_wds_entries = 0x20, 288 .target_64bit = false, 289 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 290 .shadow_reg_support = false, 291 .rri_on_ddr = false, 292 .hw_filter_reset_required = true, 293 .fw_diag_ce_download = false, 294 .credit_size_workaround = false, 295 .tx_stats_over_pktlog = false, 296 .dynamic_sar_support = false, 297 .hw_restart_disconnect = false, 298 .use_fw_tx_credits = true, 299 .delay_unmap_buffer = false, 300 }, 301 { 302 .id = QCA6174_HW_3_0_VERSION, 303 .dev_id = QCA6174_2_1_DEVICE_ID, 304 .bus = ATH10K_BUS_PCI, 305 .name = "qca6174 hw3.0", 306 .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR, 307 .uart_pin = 6, 308 .otp_exe_param = 0, 309 .channel_counters_freq_hz = 88000, 310 .max_probe_resp_desc_thres = 0, 311 .cal_data_len = 8124, 312 .fw = { 313 .dir = QCA6174_HW_3_0_FW_DIR, 314 .board = QCA6174_HW_3_0_BOARD_DATA_FILE, 315 .board_size = QCA6174_BOARD_DATA_SZ, 316 .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ, 317 }, 318 .rx_desc_ops = &qca988x_rx_desc_ops, 319 .hw_ops = &qca988x_ops, 320 .decap_align_bytes = 4, 321 .spectral_bin_discard = 0, 322 .spectral_bin_offset = 0, 323 .vht160_mcs_rx_highest = 0, 324 .vht160_mcs_tx_highest = 0, 325 .n_cipher_suites = 8, 326 .ast_skid_limit = 0x10, 327 .num_wds_entries = 0x20, 328 .target_64bit = false, 329 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 330 .shadow_reg_support = false, 331 .rri_on_ddr = false, 332 .hw_filter_reset_required = true, 333 .fw_diag_ce_download = false, 334 .credit_size_workaround = false, 335 .tx_stats_over_pktlog = false, 336 .dynamic_sar_support = false, 337 .hw_restart_disconnect = false, 338 .use_fw_tx_credits = true, 339 .delay_unmap_buffer = false, 340 }, 341 { 342 .id = QCA6174_HW_3_2_VERSION, 343 .dev_id = QCA6174_2_1_DEVICE_ID, 344 .bus = ATH10K_BUS_PCI, 345 .name = "qca6174 hw3.2", 346 .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR, 347 .uart_pin = 6, 348 .otp_exe_param = 0, 349 .channel_counters_freq_hz = 88000, 350 .max_probe_resp_desc_thres = 0, 351 .cal_data_len = 8124, 352 .fw = { 353 /* uses same binaries as hw3.0 */ 354 .dir = QCA6174_HW_3_0_FW_DIR, 355 .board = QCA6174_HW_3_0_BOARD_DATA_FILE, 356 .board_size = QCA6174_BOARD_DATA_SZ, 357 .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ, 358 }, 359 .rx_desc_ops = &qca988x_rx_desc_ops, 360 .hw_ops = &qca6174_ops, 361 .hw_clk = qca6174_clk, 362 .target_cpu_freq = 176000000, 363 .decap_align_bytes = 4, 364 .spectral_bin_discard = 0, 365 .spectral_bin_offset = 0, 366 .vht160_mcs_rx_highest = 0, 367 .vht160_mcs_tx_highest = 0, 368 .n_cipher_suites = 8, 369 .ast_skid_limit = 0x10, 370 .num_wds_entries = 0x20, 371 .target_64bit = false, 372 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 373 .shadow_reg_support = false, 374 .rri_on_ddr = false, 375 .hw_filter_reset_required = true, 376 .fw_diag_ce_download = true, 377 .credit_size_workaround = false, 378 .tx_stats_over_pktlog = false, 379 .supports_peer_stats_info = true, 380 .dynamic_sar_support = true, 381 .hw_restart_disconnect = false, 382 .use_fw_tx_credits = true, 383 .delay_unmap_buffer = false, 384 }, 385 { 386 .id = QCA99X0_HW_2_0_DEV_VERSION, 387 .dev_id = QCA99X0_2_0_DEVICE_ID, 388 .bus = ATH10K_BUS_PCI, 389 .name = "qca99x0 hw2.0", 390 .patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR, 391 .uart_pin = 7, 392 .otp_exe_param = 0x00000700, 393 .continuous_frag_desc = true, 394 .cck_rate_map_rev2 = true, 395 .channel_counters_freq_hz = 150000, 396 .max_probe_resp_desc_thres = 24, 397 .tx_chain_mask = 0xf, 398 .rx_chain_mask = 0xf, 399 .max_spatial_stream = 4, 400 .cal_data_len = 12064, 401 .fw = { 402 .dir = QCA99X0_HW_2_0_FW_DIR, 403 .board = QCA99X0_HW_2_0_BOARD_DATA_FILE, 404 .board_size = QCA99X0_BOARD_DATA_SZ, 405 .board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ, 406 }, 407 .sw_decrypt_mcast_mgmt = true, 408 .rx_desc_ops = &qca99x0_rx_desc_ops, 409 .hw_ops = &qca99x0_ops, 410 .decap_align_bytes = 1, 411 .spectral_bin_discard = 4, 412 .spectral_bin_offset = 0, 413 .vht160_mcs_rx_highest = 0, 414 .vht160_mcs_tx_highest = 0, 415 .n_cipher_suites = 11, 416 .ast_skid_limit = 0x10, 417 .num_wds_entries = 0x20, 418 .target_64bit = false, 419 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 420 .shadow_reg_support = false, 421 .rri_on_ddr = false, 422 .hw_filter_reset_required = true, 423 .fw_diag_ce_download = false, 424 .credit_size_workaround = false, 425 .tx_stats_over_pktlog = false, 426 .dynamic_sar_support = false, 427 .hw_restart_disconnect = false, 428 .use_fw_tx_credits = true, 429 .delay_unmap_buffer = false, 430 }, 431 { 432 .id = QCA9984_HW_1_0_DEV_VERSION, 433 .dev_id = QCA9984_1_0_DEVICE_ID, 434 .bus = ATH10K_BUS_PCI, 435 .name = "qca9984/qca9994 hw1.0", 436 .patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR, 437 .uart_pin = 7, 438 .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, 439 .otp_exe_param = 0x00000700, 440 .continuous_frag_desc = true, 441 .cck_rate_map_rev2 = true, 442 .channel_counters_freq_hz = 150000, 443 .max_probe_resp_desc_thres = 24, 444 .tx_chain_mask = 0xf, 445 .rx_chain_mask = 0xf, 446 .max_spatial_stream = 4, 447 .cal_data_len = 12064, 448 .fw = { 449 .dir = QCA9984_HW_1_0_FW_DIR, 450 .board = QCA9984_HW_1_0_BOARD_DATA_FILE, 451 .eboard = QCA9984_HW_1_0_EBOARD_DATA_FILE, 452 .board_size = QCA99X0_BOARD_DATA_SZ, 453 .board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ, 454 .ext_board_size = QCA99X0_EXT_BOARD_DATA_SZ, 455 }, 456 .sw_decrypt_mcast_mgmt = true, 457 .rx_desc_ops = &qca99x0_rx_desc_ops, 458 .hw_ops = &qca99x0_ops, 459 .decap_align_bytes = 1, 460 .spectral_bin_discard = 12, 461 .spectral_bin_offset = 8, 462 463 /* Can do only 2x2 VHT160 or 80+80. 1560Mbps is 4x4 80Mhz 464 * or 2x2 160Mhz, long-guard-interval. 465 */ 466 .vht160_mcs_rx_highest = 1560, 467 .vht160_mcs_tx_highest = 1560, 468 .n_cipher_suites = 11, 469 .ast_skid_limit = 0x10, 470 .num_wds_entries = 0x20, 471 .target_64bit = false, 472 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 473 .shadow_reg_support = false, 474 .rri_on_ddr = false, 475 .hw_filter_reset_required = true, 476 .fw_diag_ce_download = false, 477 .credit_size_workaround = false, 478 .tx_stats_over_pktlog = false, 479 .dynamic_sar_support = false, 480 .hw_restart_disconnect = false, 481 .use_fw_tx_credits = true, 482 .delay_unmap_buffer = false, 483 }, 484 { 485 .id = QCA9888_HW_2_0_DEV_VERSION, 486 .dev_id = QCA9888_2_0_DEVICE_ID, 487 .bus = ATH10K_BUS_PCI, 488 .name = "qca9888 hw2.0", 489 .patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR, 490 .uart_pin = 7, 491 .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, 492 .otp_exe_param = 0x00000700, 493 .continuous_frag_desc = true, 494 .channel_counters_freq_hz = 150000, 495 .max_probe_resp_desc_thres = 24, 496 .tx_chain_mask = 3, 497 .rx_chain_mask = 3, 498 .max_spatial_stream = 2, 499 .cal_data_len = 12064, 500 .fw = { 501 .dir = QCA9888_HW_2_0_FW_DIR, 502 .board = QCA9888_HW_2_0_BOARD_DATA_FILE, 503 .board_size = QCA99X0_BOARD_DATA_SZ, 504 .board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ, 505 }, 506 .sw_decrypt_mcast_mgmt = true, 507 .rx_desc_ops = &qca99x0_rx_desc_ops, 508 .hw_ops = &qca99x0_ops, 509 .decap_align_bytes = 1, 510 .spectral_bin_discard = 12, 511 .spectral_bin_offset = 8, 512 513 /* Can do only 1x1 VHT160 or 80+80. 780Mbps is 2x2 80Mhz or 514 * 1x1 160Mhz, long-guard-interval. 515 */ 516 .vht160_mcs_rx_highest = 780, 517 .vht160_mcs_tx_highest = 780, 518 .n_cipher_suites = 11, 519 .ast_skid_limit = 0x10, 520 .num_wds_entries = 0x20, 521 .target_64bit = false, 522 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 523 .shadow_reg_support = false, 524 .rri_on_ddr = false, 525 .hw_filter_reset_required = true, 526 .fw_diag_ce_download = false, 527 .credit_size_workaround = false, 528 .tx_stats_over_pktlog = false, 529 .dynamic_sar_support = false, 530 .hw_restart_disconnect = false, 531 .use_fw_tx_credits = true, 532 .delay_unmap_buffer = false, 533 }, 534 { 535 .id = QCA9377_HW_1_0_DEV_VERSION, 536 .dev_id = QCA9377_1_0_DEVICE_ID, 537 .bus = ATH10K_BUS_PCI, 538 .name = "qca9377 hw1.0", 539 .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR, 540 .uart_pin = 6, 541 .otp_exe_param = 0, 542 .channel_counters_freq_hz = 88000, 543 .max_probe_resp_desc_thres = 0, 544 .cal_data_len = 8124, 545 .fw = { 546 .dir = QCA9377_HW_1_0_FW_DIR, 547 .board = QCA9377_HW_1_0_BOARD_DATA_FILE, 548 .board_size = QCA9377_BOARD_DATA_SZ, 549 .board_ext_size = QCA9377_BOARD_EXT_DATA_SZ, 550 }, 551 .rx_desc_ops = &qca988x_rx_desc_ops, 552 .hw_ops = &qca988x_ops, 553 .decap_align_bytes = 4, 554 .spectral_bin_discard = 0, 555 .spectral_bin_offset = 0, 556 .vht160_mcs_rx_highest = 0, 557 .vht160_mcs_tx_highest = 0, 558 .n_cipher_suites = 8, 559 .ast_skid_limit = 0x10, 560 .num_wds_entries = 0x20, 561 .target_64bit = false, 562 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 563 .shadow_reg_support = false, 564 .rri_on_ddr = false, 565 .hw_filter_reset_required = true, 566 .fw_diag_ce_download = false, 567 .credit_size_workaround = false, 568 .tx_stats_over_pktlog = false, 569 .dynamic_sar_support = false, 570 .hw_restart_disconnect = false, 571 .use_fw_tx_credits = true, 572 .delay_unmap_buffer = false, 573 }, 574 { 575 .id = QCA9377_HW_1_1_DEV_VERSION, 576 .dev_id = QCA9377_1_0_DEVICE_ID, 577 .bus = ATH10K_BUS_PCI, 578 .name = "qca9377 hw1.1", 579 .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR, 580 .uart_pin = 6, 581 .otp_exe_param = 0, 582 .channel_counters_freq_hz = 88000, 583 .max_probe_resp_desc_thres = 0, 584 .cal_data_len = 8124, 585 .fw = { 586 .dir = QCA9377_HW_1_0_FW_DIR, 587 .board = QCA9377_HW_1_0_BOARD_DATA_FILE, 588 .board_size = QCA9377_BOARD_DATA_SZ, 589 .board_ext_size = QCA9377_BOARD_EXT_DATA_SZ, 590 }, 591 .rx_desc_ops = &qca988x_rx_desc_ops, 592 .hw_ops = &qca6174_ops, 593 .hw_clk = qca6174_clk, 594 .target_cpu_freq = 176000000, 595 .decap_align_bytes = 4, 596 .spectral_bin_discard = 0, 597 .spectral_bin_offset = 0, 598 .vht160_mcs_rx_highest = 0, 599 .vht160_mcs_tx_highest = 0, 600 .n_cipher_suites = 8, 601 .ast_skid_limit = 0x10, 602 .num_wds_entries = 0x20, 603 .target_64bit = false, 604 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 605 .shadow_reg_support = false, 606 .rri_on_ddr = false, 607 .hw_filter_reset_required = true, 608 .fw_diag_ce_download = true, 609 .credit_size_workaround = false, 610 .tx_stats_over_pktlog = false, 611 .dynamic_sar_support = false, 612 .hw_restart_disconnect = false, 613 .use_fw_tx_credits = true, 614 .delay_unmap_buffer = false, 615 }, 616 { 617 .id = QCA9377_HW_1_1_DEV_VERSION, 618 .dev_id = QCA9377_1_0_DEVICE_ID, 619 .bus = ATH10K_BUS_SDIO, 620 .name = "qca9377 hw1.1 sdio", 621 .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR, 622 .uart_pin = 19, 623 .otp_exe_param = 0, 624 .channel_counters_freq_hz = 88000, 625 .max_probe_resp_desc_thres = 0, 626 .cal_data_len = 8124, 627 .fw = { 628 .dir = QCA9377_HW_1_0_FW_DIR, 629 .board = QCA9377_HW_1_0_BOARD_DATA_FILE, 630 .board_size = QCA9377_BOARD_DATA_SZ, 631 .board_ext_size = QCA9377_BOARD_EXT_DATA_SZ, 632 }, 633 .rx_desc_ops = &qca988x_rx_desc_ops, 634 .hw_ops = &qca6174_ops, 635 .hw_clk = qca6174_clk, 636 .target_cpu_freq = 176000000, 637 .decap_align_bytes = 4, 638 .n_cipher_suites = 8, 639 .num_peers = TARGET_QCA9377_HL_NUM_PEERS, 640 .ast_skid_limit = 0x10, 641 .num_wds_entries = 0x20, 642 .uart_pin_workaround = true, 643 .credit_size_workaround = true, 644 .dynamic_sar_support = false, 645 .hw_restart_disconnect = false, 646 .use_fw_tx_credits = true, 647 .delay_unmap_buffer = false, 648 }, 649 { 650 .id = QCA4019_HW_1_0_DEV_VERSION, 651 .dev_id = 0, 652 .bus = ATH10K_BUS_AHB, 653 .name = "qca4019 hw1.0", 654 .patch_load_addr = QCA4019_HW_1_0_PATCH_LOAD_ADDR, 655 .uart_pin = 7, 656 .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, 657 .otp_exe_param = 0x0010000, 658 .continuous_frag_desc = true, 659 .cck_rate_map_rev2 = true, 660 .channel_counters_freq_hz = 125000, 661 .max_probe_resp_desc_thres = 24, 662 .tx_chain_mask = 0x3, 663 .rx_chain_mask = 0x3, 664 .max_spatial_stream = 2, 665 .cal_data_len = 12064, 666 .fw = { 667 .dir = QCA4019_HW_1_0_FW_DIR, 668 .board = QCA4019_HW_1_0_BOARD_DATA_FILE, 669 .board_size = QCA4019_BOARD_DATA_SZ, 670 .board_ext_size = QCA4019_BOARD_EXT_DATA_SZ, 671 }, 672 .sw_decrypt_mcast_mgmt = true, 673 .rx_desc_ops = &qca99x0_rx_desc_ops, 674 .hw_ops = &qca99x0_ops, 675 .decap_align_bytes = 1, 676 .spectral_bin_discard = 4, 677 .spectral_bin_offset = 0, 678 .vht160_mcs_rx_highest = 0, 679 .vht160_mcs_tx_highest = 0, 680 .n_cipher_suites = 11, 681 .ast_skid_limit = 0x10, 682 .num_wds_entries = 0x20, 683 .target_64bit = false, 684 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, 685 .shadow_reg_support = false, 686 .rri_on_ddr = false, 687 .hw_filter_reset_required = true, 688 .fw_diag_ce_download = false, 689 .credit_size_workaround = false, 690 .tx_stats_over_pktlog = false, 691 .dynamic_sar_support = false, 692 .hw_restart_disconnect = false, 693 .use_fw_tx_credits = true, 694 .delay_unmap_buffer = false, 695 }, 696 { 697 .id = WCN3990_HW_1_0_DEV_VERSION, 698 .dev_id = 0, 699 .bus = ATH10K_BUS_SNOC, 700 .name = "wcn3990 hw1.0", 701 .continuous_frag_desc = true, 702 .tx_chain_mask = 0x7, 703 .rx_chain_mask = 0x7, 704 .max_spatial_stream = 4, 705 .fw = { 706 .dir = WCN3990_HW_1_0_FW_DIR, 707 }, 708 .sw_decrypt_mcast_mgmt = true, 709 .rx_desc_ops = &wcn3990_rx_desc_ops, 710 .hw_ops = &wcn3990_ops, 711 .decap_align_bytes = 1, 712 .num_peers = TARGET_HL_TLV_NUM_PEERS, 713 .n_cipher_suites = 11, 714 .ast_skid_limit = TARGET_HL_TLV_AST_SKID_LIMIT, 715 .num_wds_entries = TARGET_HL_TLV_NUM_WDS_ENTRIES, 716 .target_64bit = true, 717 .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL_DUAL_MAC, 718 .shadow_reg_support = true, 719 .rri_on_ddr = true, 720 .hw_filter_reset_required = false, 721 .fw_diag_ce_download = false, 722 .credit_size_workaround = false, 723 .tx_stats_over_pktlog = false, 724 .dynamic_sar_support = true, 725 .hw_restart_disconnect = true, 726 .use_fw_tx_credits = false, 727 .delay_unmap_buffer = true, 728 }, 729 }; 730 731 static const char *const ath10k_core_fw_feature_str[] = { 732 [ATH10K_FW_FEATURE_EXT_WMI_MGMT_RX] = "wmi-mgmt-rx", 733 [ATH10K_FW_FEATURE_WMI_10X] = "wmi-10.x", 734 [ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX] = "has-wmi-mgmt-tx", 735 [ATH10K_FW_FEATURE_NO_P2P] = "no-p2p", 736 [ATH10K_FW_FEATURE_WMI_10_2] = "wmi-10.2", 737 [ATH10K_FW_FEATURE_MULTI_VIF_PS_SUPPORT] = "multi-vif-ps", 738 [ATH10K_FW_FEATURE_WOWLAN_SUPPORT] = "wowlan", 739 [ATH10K_FW_FEATURE_IGNORE_OTP_RESULT] = "ignore-otp", 740 [ATH10K_FW_FEATURE_NO_NWIFI_DECAP_4ADDR_PADDING] = "no-4addr-pad", 741 [ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT] = "skip-clock-init", 742 [ATH10K_FW_FEATURE_RAW_MODE_SUPPORT] = "raw-mode", 743 [ATH10K_FW_FEATURE_SUPPORTS_ADAPTIVE_CCA] = "adaptive-cca", 744 [ATH10K_FW_FEATURE_MFP_SUPPORT] = "mfp", 745 [ATH10K_FW_FEATURE_PEER_FLOW_CONTROL] = "peer-flow-ctrl", 746 [ATH10K_FW_FEATURE_BTCOEX_PARAM] = "btcoex-param", 747 [ATH10K_FW_FEATURE_SKIP_NULL_FUNC_WAR] = "skip-null-func-war", 748 [ATH10K_FW_FEATURE_ALLOWS_MESH_BCAST] = "allows-mesh-bcast", 749 [ATH10K_FW_FEATURE_NO_PS] = "no-ps", 750 [ATH10K_FW_FEATURE_MGMT_TX_BY_REF] = "mgmt-tx-by-reference", 751 [ATH10K_FW_FEATURE_NON_BMI] = "non-bmi", 752 [ATH10K_FW_FEATURE_SINGLE_CHAN_INFO_PER_CHANNEL] = "single-chan-info-per-channel", 753 [ATH10K_FW_FEATURE_PEER_FIXED_RATE] = "peer-fixed-rate", 754 [ATH10K_FW_FEATURE_IRAM_RECOVERY] = "iram-recovery", 755 }; 756 757 static unsigned int ath10k_core_get_fw_feature_str(char *buf, 758 size_t buf_len, 759 enum ath10k_fw_features feat) 760 { 761 /* make sure that ath10k_core_fw_feature_str[] gets updated */ 762 BUILD_BUG_ON(ARRAY_SIZE(ath10k_core_fw_feature_str) != 763 ATH10K_FW_FEATURE_COUNT); 764 765 if (feat >= ARRAY_SIZE(ath10k_core_fw_feature_str) || 766 WARN_ON(!ath10k_core_fw_feature_str[feat])) { 767 return scnprintf(buf, buf_len, "bit%d", feat); 768 } 769 770 return scnprintf(buf, buf_len, "%s", ath10k_core_fw_feature_str[feat]); 771 } 772 773 void ath10k_core_get_fw_features_str(struct ath10k *ar, 774 char *buf, 775 size_t buf_len) 776 { 777 size_t len = 0; 778 int i; 779 780 for (i = 0; i < ATH10K_FW_FEATURE_COUNT; i++) { 781 if (test_bit(i, ar->normal_mode_fw.fw_file.fw_features)) { 782 if (len > 0) 783 len += scnprintf(buf + len, buf_len - len, ","); 784 785 len += ath10k_core_get_fw_feature_str(buf + len, 786 buf_len - len, 787 i); 788 } 789 } 790 } 791 792 static void ath10k_send_suspend_complete(struct ath10k *ar) 793 { 794 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot suspend complete\n"); 795 796 complete(&ar->target_suspend); 797 } 798 799 static int ath10k_init_sdio(struct ath10k *ar, enum ath10k_firmware_mode mode) 800 { 801 bool mtu_workaround = ar->hw_params.credit_size_workaround; 802 int ret; 803 u32 param = 0; 804 805 ret = ath10k_bmi_write32(ar, hi_mbox_io_block_sz, 256); 806 if (ret) 807 return ret; 808 809 ret = ath10k_bmi_write32(ar, hi_mbox_isr_yield_limit, 99); 810 if (ret) 811 return ret; 812 813 ret = ath10k_bmi_read32(ar, hi_acs_flags, ¶m); 814 if (ret) 815 return ret; 816 817 param |= HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET; 818 819 if (mode == ATH10K_FIRMWARE_MODE_NORMAL && !mtu_workaround) 820 param |= HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE; 821 else 822 param &= ~HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE; 823 824 if (mode == ATH10K_FIRMWARE_MODE_UTF) 825 param &= ~HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET; 826 else 827 param |= HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET; 828 829 ret = ath10k_bmi_write32(ar, hi_acs_flags, param); 830 if (ret) 831 return ret; 832 833 ret = ath10k_bmi_read32(ar, hi_option_flag2, ¶m); 834 if (ret) 835 return ret; 836 837 param |= HI_OPTION_SDIO_CRASH_DUMP_ENHANCEMENT_HOST; 838 839 ret = ath10k_bmi_write32(ar, hi_option_flag2, param); 840 if (ret) 841 return ret; 842 843 return 0; 844 } 845 846 static int ath10k_init_configure_target(struct ath10k *ar) 847 { 848 u32 param_host; 849 int ret; 850 851 /* tell target which HTC version it is used*/ 852 ret = ath10k_bmi_write32(ar, hi_app_host_interest, 853 HTC_PROTOCOL_VERSION); 854 if (ret) { 855 ath10k_err(ar, "settings HTC version failed\n"); 856 return ret; 857 } 858 859 /* set the firmware mode to STA/IBSS/AP */ 860 ret = ath10k_bmi_read32(ar, hi_option_flag, ¶m_host); 861 if (ret) { 862 ath10k_err(ar, "setting firmware mode (1/2) failed\n"); 863 return ret; 864 } 865 866 /* TODO following parameters need to be re-visited. */ 867 /* num_device */ 868 param_host |= (1 << HI_OPTION_NUM_DEV_SHIFT); 869 /* Firmware mode */ 870 /* FIXME: Why FW_MODE_AP ??.*/ 871 param_host |= (HI_OPTION_FW_MODE_AP << HI_OPTION_FW_MODE_SHIFT); 872 /* mac_addr_method */ 873 param_host |= (1 << HI_OPTION_MAC_ADDR_METHOD_SHIFT); 874 /* firmware_bridge */ 875 param_host |= (0 << HI_OPTION_FW_BRIDGE_SHIFT); 876 /* fwsubmode */ 877 param_host |= (0 << HI_OPTION_FW_SUBMODE_SHIFT); 878 879 ret = ath10k_bmi_write32(ar, hi_option_flag, param_host); 880 if (ret) { 881 ath10k_err(ar, "setting firmware mode (2/2) failed\n"); 882 return ret; 883 } 884 885 /* We do all byte-swapping on the host */ 886 ret = ath10k_bmi_write32(ar, hi_be, 0); 887 if (ret) { 888 ath10k_err(ar, "setting host CPU BE mode failed\n"); 889 return ret; 890 } 891 892 /* FW descriptor/Data swap flags */ 893 ret = ath10k_bmi_write32(ar, hi_fw_swap, 0); 894 895 if (ret) { 896 ath10k_err(ar, "setting FW data/desc swap flags failed\n"); 897 return ret; 898 } 899 900 /* Some devices have a special sanity check that verifies the PCI 901 * Device ID is written to this host interest var. It is known to be 902 * required to boot QCA6164. 903 */ 904 ret = ath10k_bmi_write32(ar, hi_hci_uart_pwr_mgmt_params_ext, 905 ar->dev_id); 906 if (ret) { 907 ath10k_err(ar, "failed to set pwr_mgmt_params: %d\n", ret); 908 return ret; 909 } 910 911 return 0; 912 } 913 914 static const struct firmware *ath10k_fetch_fw_file(struct ath10k *ar, 915 const char *dir, 916 const char *file) 917 { 918 char filename[100]; 919 const struct firmware *fw; 920 int ret; 921 922 if (file == NULL) 923 return ERR_PTR(-ENOENT); 924 925 if (dir == NULL) 926 dir = "."; 927 928 snprintf(filename, sizeof(filename), "%s/%s", dir, file); 929 ret = firmware_request_nowarn(&fw, filename, ar->dev); 930 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot fw request '%s': %d\n", 931 filename, ret); 932 933 if (ret) 934 return ERR_PTR(ret); 935 936 return fw; 937 } 938 939 static int ath10k_push_board_ext_data(struct ath10k *ar, const void *data, 940 size_t data_len) 941 { 942 u32 board_data_size = ar->hw_params.fw.board_size; 943 u32 board_ext_data_size = ar->hw_params.fw.board_ext_size; 944 u32 board_ext_data_addr; 945 int ret; 946 947 ret = ath10k_bmi_read32(ar, hi_board_ext_data, &board_ext_data_addr); 948 if (ret) { 949 ath10k_err(ar, "could not read board ext data addr (%d)\n", 950 ret); 951 return ret; 952 } 953 954 ath10k_dbg(ar, ATH10K_DBG_BOOT, 955 "boot push board extended data addr 0x%x\n", 956 board_ext_data_addr); 957 958 if (board_ext_data_addr == 0) 959 return 0; 960 961 if (data_len != (board_data_size + board_ext_data_size)) { 962 ath10k_err(ar, "invalid board (ext) data sizes %zu != %d+%d\n", 963 data_len, board_data_size, board_ext_data_size); 964 return -EINVAL; 965 } 966 967 ret = ath10k_bmi_write_memory(ar, board_ext_data_addr, 968 data + board_data_size, 969 board_ext_data_size); 970 if (ret) { 971 ath10k_err(ar, "could not write board ext data (%d)\n", ret); 972 return ret; 973 } 974 975 ret = ath10k_bmi_write32(ar, hi_board_ext_data_config, 976 (board_ext_data_size << 16) | 1); 977 if (ret) { 978 ath10k_err(ar, "could not write board ext data bit (%d)\n", 979 ret); 980 return ret; 981 } 982 983 return 0; 984 } 985 986 static int ath10k_core_get_board_id_from_otp(struct ath10k *ar) 987 { 988 u32 result, address; 989 u8 board_id, chip_id; 990 bool ext_bid_support; 991 int ret, bmi_board_id_param; 992 993 address = ar->hw_params.patch_load_addr; 994 995 if (!ar->normal_mode_fw.fw_file.otp_data || 996 !ar->normal_mode_fw.fw_file.otp_len) { 997 ath10k_warn(ar, 998 "failed to retrieve board id because of invalid otp\n"); 999 return -ENODATA; 1000 } 1001 1002 if (ar->id.bmi_ids_valid) { 1003 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1004 "boot already acquired valid otp board id,skip download, board_id %d chip_id %d\n", 1005 ar->id.bmi_board_id, ar->id.bmi_chip_id); 1006 goto skip_otp_download; 1007 } 1008 1009 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1010 "boot upload otp to 0x%x len %zd for board id\n", 1011 address, ar->normal_mode_fw.fw_file.otp_len); 1012 1013 ret = ath10k_bmi_fast_download(ar, address, 1014 ar->normal_mode_fw.fw_file.otp_data, 1015 ar->normal_mode_fw.fw_file.otp_len); 1016 if (ret) { 1017 ath10k_err(ar, "could not write otp for board id check: %d\n", 1018 ret); 1019 return ret; 1020 } 1021 1022 if (ar->cal_mode == ATH10K_PRE_CAL_MODE_DT || 1023 ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE || 1024 ar->cal_mode == ATH10K_PRE_CAL_MODE_NVMEM) 1025 bmi_board_id_param = BMI_PARAM_GET_FLASH_BOARD_ID; 1026 else 1027 bmi_board_id_param = BMI_PARAM_GET_EEPROM_BOARD_ID; 1028 1029 ret = ath10k_bmi_execute(ar, address, bmi_board_id_param, &result); 1030 if (ret) { 1031 ath10k_err(ar, "could not execute otp for board id check: %d\n", 1032 ret); 1033 return ret; 1034 } 1035 1036 board_id = MS(result, ATH10K_BMI_BOARD_ID_FROM_OTP); 1037 chip_id = MS(result, ATH10K_BMI_CHIP_ID_FROM_OTP); 1038 ext_bid_support = (result & ATH10K_BMI_EXT_BOARD_ID_SUPPORT); 1039 1040 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1041 "boot get otp board id result 0x%08x board_id %d chip_id %d ext_bid_support %d\n", 1042 result, board_id, chip_id, ext_bid_support); 1043 1044 ar->id.ext_bid_supported = ext_bid_support; 1045 1046 if ((result & ATH10K_BMI_BOARD_ID_STATUS_MASK) != 0 || 1047 (board_id == 0)) { 1048 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1049 "board id does not exist in otp, ignore it\n"); 1050 return -EOPNOTSUPP; 1051 } 1052 1053 ar->id.bmi_ids_valid = true; 1054 ar->id.bmi_board_id = board_id; 1055 ar->id.bmi_chip_id = chip_id; 1056 1057 skip_otp_download: 1058 1059 return 0; 1060 } 1061 1062 static void ath10k_core_check_bdfext(const struct dmi_header *hdr, void *data) 1063 { 1064 struct ath10k *ar = data; 1065 const char *bdf_ext; 1066 const char *magic = ATH10K_SMBIOS_BDF_EXT_MAGIC; 1067 u8 bdf_enabled; 1068 int i; 1069 1070 if (hdr->type != ATH10K_SMBIOS_BDF_EXT_TYPE) 1071 return; 1072 1073 if (hdr->length != ATH10K_SMBIOS_BDF_EXT_LENGTH) { 1074 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1075 "wrong smbios bdf ext type length (%d).\n", 1076 hdr->length); 1077 return; 1078 } 1079 1080 bdf_enabled = *((u8 *)hdr + ATH10K_SMBIOS_BDF_EXT_OFFSET); 1081 if (!bdf_enabled) { 1082 ath10k_dbg(ar, ATH10K_DBG_BOOT, "bdf variant name not found.\n"); 1083 return; 1084 } 1085 1086 /* Only one string exists (per spec) */ 1087 bdf_ext = (char *)hdr + hdr->length; 1088 1089 if (memcmp(bdf_ext, magic, strlen(magic)) != 0) { 1090 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1091 "bdf variant magic does not match.\n"); 1092 return; 1093 } 1094 1095 for (i = 0; i < strlen(bdf_ext); i++) { 1096 if (!isascii(bdf_ext[i]) || !isprint(bdf_ext[i])) { 1097 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1098 "bdf variant name contains non ascii chars.\n"); 1099 return; 1100 } 1101 } 1102 1103 /* Copy extension name without magic suffix */ 1104 if (strscpy(ar->id.bdf_ext, bdf_ext + strlen(magic), 1105 sizeof(ar->id.bdf_ext)) < 0) { 1106 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1107 "bdf variant string is longer than the buffer can accommodate (variant: %s)\n", 1108 bdf_ext); 1109 return; 1110 } 1111 1112 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1113 "found and validated bdf variant smbios_type 0x%x bdf %s\n", 1114 ATH10K_SMBIOS_BDF_EXT_TYPE, bdf_ext); 1115 } 1116 1117 static int ath10k_core_check_smbios(struct ath10k *ar) 1118 { 1119 ar->id.bdf_ext[0] = '\0'; 1120 dmi_walk(ath10k_core_check_bdfext, ar); 1121 1122 if (ar->id.bdf_ext[0] == '\0') 1123 return -ENODATA; 1124 1125 return 0; 1126 } 1127 1128 int ath10k_core_check_dt(struct ath10k *ar) 1129 { 1130 struct device_node *node; 1131 const char *variant = NULL; 1132 1133 node = ar->dev->of_node; 1134 if (!node) 1135 return -ENOENT; 1136 1137 of_property_read_string(node, "qcom,ath10k-calibration-variant", 1138 &variant); 1139 if (!variant) 1140 return -ENODATA; 1141 1142 if (strscpy(ar->id.bdf_ext, variant, sizeof(ar->id.bdf_ext)) < 0) 1143 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1144 "bdf variant string is longer than the buffer can accommodate (variant: %s)\n", 1145 variant); 1146 1147 return 0; 1148 } 1149 EXPORT_SYMBOL(ath10k_core_check_dt); 1150 1151 static int ath10k_download_fw(struct ath10k *ar) 1152 { 1153 u32 address, data_len; 1154 const void *data; 1155 int ret; 1156 struct pm_qos_request latency_qos; 1157 1158 address = ar->hw_params.patch_load_addr; 1159 1160 data = ar->running_fw->fw_file.firmware_data; 1161 data_len = ar->running_fw->fw_file.firmware_len; 1162 1163 ret = ath10k_swap_code_seg_configure(ar, &ar->running_fw->fw_file); 1164 if (ret) { 1165 ath10k_err(ar, "failed to configure fw code swap: %d\n", 1166 ret); 1167 return ret; 1168 } 1169 1170 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1171 "boot uploading firmware image %pK len %d\n", 1172 data, data_len); 1173 1174 /* Check if device supports to download firmware via 1175 * diag copy engine. Downloading firmware via diag CE 1176 * greatly reduces the time to download firmware. 1177 */ 1178 if (ar->hw_params.fw_diag_ce_download) { 1179 ret = ath10k_hw_diag_fast_download(ar, address, 1180 data, data_len); 1181 if (ret == 0) 1182 /* firmware upload via diag ce was successful */ 1183 return 0; 1184 1185 ath10k_warn(ar, 1186 "failed to upload firmware via diag ce, trying BMI: %d", 1187 ret); 1188 } 1189 1190 memset(&latency_qos, 0, sizeof(latency_qos)); 1191 cpu_latency_qos_add_request(&latency_qos, 0); 1192 1193 ret = ath10k_bmi_fast_download(ar, address, data, data_len); 1194 1195 cpu_latency_qos_remove_request(&latency_qos); 1196 1197 return ret; 1198 } 1199 1200 void ath10k_core_free_board_files(struct ath10k *ar) 1201 { 1202 if (!IS_ERR(ar->normal_mode_fw.board)) 1203 release_firmware(ar->normal_mode_fw.board); 1204 1205 if (!IS_ERR(ar->normal_mode_fw.ext_board)) 1206 release_firmware(ar->normal_mode_fw.ext_board); 1207 1208 ar->normal_mode_fw.board = NULL; 1209 ar->normal_mode_fw.board_data = NULL; 1210 ar->normal_mode_fw.board_len = 0; 1211 ar->normal_mode_fw.ext_board = NULL; 1212 ar->normal_mode_fw.ext_board_data = NULL; 1213 ar->normal_mode_fw.ext_board_len = 0; 1214 } 1215 EXPORT_SYMBOL(ath10k_core_free_board_files); 1216 1217 static void ath10k_core_free_firmware_files(struct ath10k *ar) 1218 { 1219 if (!IS_ERR(ar->normal_mode_fw.fw_file.firmware)) 1220 release_firmware(ar->normal_mode_fw.fw_file.firmware); 1221 1222 if (!IS_ERR(ar->cal_file)) 1223 release_firmware(ar->cal_file); 1224 1225 if (!IS_ERR(ar->pre_cal_file)) 1226 release_firmware(ar->pre_cal_file); 1227 1228 ath10k_swap_code_seg_release(ar, &ar->normal_mode_fw.fw_file); 1229 1230 ar->normal_mode_fw.fw_file.otp_data = NULL; 1231 ar->normal_mode_fw.fw_file.otp_len = 0; 1232 1233 ar->normal_mode_fw.fw_file.firmware = NULL; 1234 ar->normal_mode_fw.fw_file.firmware_data = NULL; 1235 ar->normal_mode_fw.fw_file.firmware_len = 0; 1236 1237 ar->cal_file = NULL; 1238 ar->pre_cal_file = NULL; 1239 } 1240 1241 static int ath10k_fetch_cal_file(struct ath10k *ar) 1242 { 1243 char filename[100]; 1244 1245 /* pre-cal-<bus>-<id>.bin */ 1246 scnprintf(filename, sizeof(filename), "pre-cal-%s-%s.bin", 1247 ath10k_bus_str(ar->hif.bus), dev_name(ar->dev)); 1248 1249 ar->pre_cal_file = ath10k_fetch_fw_file(ar, ATH10K_FW_DIR, filename); 1250 if (!IS_ERR(ar->pre_cal_file)) 1251 goto success; 1252 1253 /* cal-<bus>-<id>.bin */ 1254 scnprintf(filename, sizeof(filename), "cal-%s-%s.bin", 1255 ath10k_bus_str(ar->hif.bus), dev_name(ar->dev)); 1256 1257 ar->cal_file = ath10k_fetch_fw_file(ar, ATH10K_FW_DIR, filename); 1258 if (IS_ERR(ar->cal_file)) 1259 /* calibration file is optional, don't print any warnings */ 1260 return PTR_ERR(ar->cal_file); 1261 success: 1262 ath10k_dbg(ar, ATH10K_DBG_BOOT, "found calibration file %s/%s\n", 1263 ATH10K_FW_DIR, filename); 1264 1265 return 0; 1266 } 1267 1268 static int ath10k_core_fetch_board_data_api_1(struct ath10k *ar, int bd_ie_type) 1269 { 1270 const struct firmware *fw; 1271 char boardname[100]; 1272 1273 if (bd_ie_type == ATH10K_BD_IE_BOARD) { 1274 if (!ar->hw_params.fw.board) { 1275 ath10k_err(ar, "failed to find board file fw entry\n"); 1276 return -EINVAL; 1277 } 1278 1279 scnprintf(boardname, sizeof(boardname), "board-%s-%s.bin", 1280 ath10k_bus_str(ar->hif.bus), dev_name(ar->dev)); 1281 1282 ar->normal_mode_fw.board = ath10k_fetch_fw_file(ar, 1283 ar->hw_params.fw.dir, 1284 boardname); 1285 if (IS_ERR(ar->normal_mode_fw.board)) { 1286 fw = ath10k_fetch_fw_file(ar, 1287 ar->hw_params.fw.dir, 1288 ar->hw_params.fw.board); 1289 ar->normal_mode_fw.board = fw; 1290 } 1291 1292 if (IS_ERR(ar->normal_mode_fw.board)) 1293 return PTR_ERR(ar->normal_mode_fw.board); 1294 1295 ar->normal_mode_fw.board_data = ar->normal_mode_fw.board->data; 1296 ar->normal_mode_fw.board_len = ar->normal_mode_fw.board->size; 1297 } else if (bd_ie_type == ATH10K_BD_IE_BOARD_EXT) { 1298 if (!ar->hw_params.fw.eboard) { 1299 ath10k_err(ar, "failed to find eboard file fw entry\n"); 1300 return -EINVAL; 1301 } 1302 1303 fw = ath10k_fetch_fw_file(ar, ar->hw_params.fw.dir, 1304 ar->hw_params.fw.eboard); 1305 ar->normal_mode_fw.ext_board = fw; 1306 if (IS_ERR(ar->normal_mode_fw.ext_board)) 1307 return PTR_ERR(ar->normal_mode_fw.ext_board); 1308 1309 ar->normal_mode_fw.ext_board_data = ar->normal_mode_fw.ext_board->data; 1310 ar->normal_mode_fw.ext_board_len = ar->normal_mode_fw.ext_board->size; 1311 } 1312 1313 return 0; 1314 } 1315 1316 static int ath10k_core_parse_bd_ie_board(struct ath10k *ar, 1317 const void *buf, size_t buf_len, 1318 const char *boardname, 1319 int bd_ie_type) 1320 { 1321 const struct ath10k_fw_ie *hdr; 1322 bool name_match_found; 1323 int ret, board_ie_id; 1324 size_t board_ie_len; 1325 const void *board_ie_data; 1326 1327 name_match_found = false; 1328 1329 /* go through ATH10K_BD_IE_BOARD_ elements */ 1330 while (buf_len > sizeof(struct ath10k_fw_ie)) { 1331 hdr = buf; 1332 board_ie_id = le32_to_cpu(hdr->id); 1333 board_ie_len = le32_to_cpu(hdr->len); 1334 board_ie_data = hdr->data; 1335 1336 buf_len -= sizeof(*hdr); 1337 buf += sizeof(*hdr); 1338 1339 if (buf_len < ALIGN(board_ie_len, 4)) { 1340 ath10k_err(ar, "invalid ATH10K_BD_IE_BOARD length: %zu < %zu\n", 1341 buf_len, ALIGN(board_ie_len, 4)); 1342 ret = -EINVAL; 1343 goto out; 1344 } 1345 1346 switch (board_ie_id) { 1347 case ATH10K_BD_IE_BOARD_NAME: 1348 ath10k_dbg_dump(ar, ATH10K_DBG_BOOT, "board name", "", 1349 board_ie_data, board_ie_len); 1350 1351 if (board_ie_len != strlen(boardname)) 1352 break; 1353 1354 ret = memcmp(board_ie_data, boardname, strlen(boardname)); 1355 if (ret) 1356 break; 1357 1358 name_match_found = true; 1359 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1360 "boot found match for name '%s'", 1361 boardname); 1362 break; 1363 case ATH10K_BD_IE_BOARD_DATA: 1364 if (!name_match_found) 1365 /* no match found */ 1366 break; 1367 1368 if (bd_ie_type == ATH10K_BD_IE_BOARD) { 1369 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1370 "boot found board data for '%s'", 1371 boardname); 1372 1373 ar->normal_mode_fw.board_data = board_ie_data; 1374 ar->normal_mode_fw.board_len = board_ie_len; 1375 } else if (bd_ie_type == ATH10K_BD_IE_BOARD_EXT) { 1376 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1377 "boot found eboard data for '%s'", 1378 boardname); 1379 1380 ar->normal_mode_fw.ext_board_data = board_ie_data; 1381 ar->normal_mode_fw.ext_board_len = board_ie_len; 1382 } 1383 1384 ret = 0; 1385 goto out; 1386 default: 1387 ath10k_warn(ar, "unknown ATH10K_BD_IE_BOARD found: %d\n", 1388 board_ie_id); 1389 break; 1390 } 1391 1392 /* jump over the padding */ 1393 board_ie_len = ALIGN(board_ie_len, 4); 1394 1395 buf_len -= board_ie_len; 1396 buf += board_ie_len; 1397 } 1398 1399 /* no match found */ 1400 ret = -ENOENT; 1401 1402 out: 1403 return ret; 1404 } 1405 1406 static int ath10k_core_search_bd(struct ath10k *ar, 1407 const char *boardname, 1408 const u8 *data, 1409 size_t len) 1410 { 1411 size_t ie_len; 1412 struct ath10k_fw_ie *hdr; 1413 int ret = -ENOENT, ie_id; 1414 1415 while (len > sizeof(struct ath10k_fw_ie)) { 1416 hdr = (struct ath10k_fw_ie *)data; 1417 ie_id = le32_to_cpu(hdr->id); 1418 ie_len = le32_to_cpu(hdr->len); 1419 1420 len -= sizeof(*hdr); 1421 data = hdr->data; 1422 1423 if (len < ALIGN(ie_len, 4)) { 1424 ath10k_err(ar, "invalid length for board ie_id %d ie_len %zu len %zu\n", 1425 ie_id, ie_len, len); 1426 return -EINVAL; 1427 } 1428 1429 switch (ie_id) { 1430 case ATH10K_BD_IE_BOARD: 1431 ret = ath10k_core_parse_bd_ie_board(ar, data, ie_len, 1432 boardname, 1433 ATH10K_BD_IE_BOARD); 1434 if (ret == -ENOENT) 1435 /* no match found, continue */ 1436 break; 1437 1438 /* either found or error, so stop searching */ 1439 goto out; 1440 case ATH10K_BD_IE_BOARD_EXT: 1441 ret = ath10k_core_parse_bd_ie_board(ar, data, ie_len, 1442 boardname, 1443 ATH10K_BD_IE_BOARD_EXT); 1444 if (ret == -ENOENT) 1445 /* no match found, continue */ 1446 break; 1447 1448 /* either found or error, so stop searching */ 1449 goto out; 1450 } 1451 1452 /* jump over the padding */ 1453 ie_len = ALIGN(ie_len, 4); 1454 1455 len -= ie_len; 1456 data += ie_len; 1457 } 1458 1459 out: 1460 /* return result of parse_bd_ie_board() or -ENOENT */ 1461 return ret; 1462 } 1463 1464 static int ath10k_core_fetch_board_data_api_n(struct ath10k *ar, 1465 const char *boardname, 1466 const char *fallback_boardname1, 1467 const char *fallback_boardname2, 1468 const char *filename) 1469 { 1470 size_t len, magic_len; 1471 const u8 *data; 1472 int ret; 1473 1474 /* Skip if already fetched during board data download */ 1475 if (!ar->normal_mode_fw.board) 1476 ar->normal_mode_fw.board = ath10k_fetch_fw_file(ar, 1477 ar->hw_params.fw.dir, 1478 filename); 1479 if (IS_ERR(ar->normal_mode_fw.board)) 1480 return PTR_ERR(ar->normal_mode_fw.board); 1481 1482 data = ar->normal_mode_fw.board->data; 1483 len = ar->normal_mode_fw.board->size; 1484 1485 /* magic has extra null byte padded */ 1486 magic_len = strlen(ATH10K_BOARD_MAGIC) + 1; 1487 if (len < magic_len) { 1488 ath10k_err(ar, "failed to find magic value in %s/%s, file too short: %zu\n", 1489 ar->hw_params.fw.dir, filename, len); 1490 ret = -EINVAL; 1491 goto err; 1492 } 1493 1494 if (memcmp(data, ATH10K_BOARD_MAGIC, magic_len)) { 1495 ath10k_err(ar, "found invalid board magic\n"); 1496 ret = -EINVAL; 1497 goto err; 1498 } 1499 1500 /* magic is padded to 4 bytes */ 1501 magic_len = ALIGN(magic_len, 4); 1502 if (len < magic_len) { 1503 ath10k_err(ar, "failed: %s/%s too small to contain board data, len: %zu\n", 1504 ar->hw_params.fw.dir, filename, len); 1505 ret = -EINVAL; 1506 goto err; 1507 } 1508 1509 data += magic_len; 1510 len -= magic_len; 1511 1512 /* attempt to find boardname in the IE list */ 1513 ret = ath10k_core_search_bd(ar, boardname, data, len); 1514 1515 /* if we didn't find it and have a fallback name, try that */ 1516 if (ret == -ENOENT && fallback_boardname1) 1517 ret = ath10k_core_search_bd(ar, fallback_boardname1, data, len); 1518 1519 if (ret == -ENOENT && fallback_boardname2) 1520 ret = ath10k_core_search_bd(ar, fallback_boardname2, data, len); 1521 1522 if (ret == -ENOENT) { 1523 ath10k_err(ar, 1524 "failed to fetch board data for %s from %s/%s\n", 1525 boardname, ar->hw_params.fw.dir, filename); 1526 ret = -ENODATA; 1527 } 1528 1529 if (ret) 1530 goto err; 1531 1532 return 0; 1533 1534 err: 1535 ath10k_core_free_board_files(ar); 1536 return ret; 1537 } 1538 1539 static int ath10k_core_create_board_name(struct ath10k *ar, char *name, 1540 size_t name_len, bool with_variant, 1541 bool with_chip_id) 1542 { 1543 /* strlen(',variant=') + strlen(ar->id.bdf_ext) */ 1544 char variant[9 + ATH10K_SMBIOS_BDF_EXT_STR_LENGTH] = { 0 }; 1545 1546 if (with_variant && ar->id.bdf_ext[0] != '\0') 1547 scnprintf(variant, sizeof(variant), ",variant=%s", 1548 ar->id.bdf_ext); 1549 1550 if (ar->id.bmi_ids_valid) { 1551 scnprintf(name, name_len, 1552 "bus=%s,bmi-chip-id=%d,bmi-board-id=%d%s", 1553 ath10k_bus_str(ar->hif.bus), 1554 ar->id.bmi_chip_id, 1555 ar->id.bmi_board_id, variant); 1556 goto out; 1557 } 1558 1559 if (ar->id.qmi_ids_valid) { 1560 if (with_chip_id) 1561 scnprintf(name, name_len, 1562 "bus=%s,qmi-board-id=%x,qmi-chip-id=%x%s", 1563 ath10k_bus_str(ar->hif.bus), 1564 ar->id.qmi_board_id, ar->id.qmi_chip_id, 1565 variant); 1566 else 1567 scnprintf(name, name_len, 1568 "bus=%s,qmi-board-id=%x", 1569 ath10k_bus_str(ar->hif.bus), 1570 ar->id.qmi_board_id); 1571 goto out; 1572 } 1573 1574 scnprintf(name, name_len, 1575 "bus=%s,vendor=%04x,device=%04x,subsystem-vendor=%04x,subsystem-device=%04x%s", 1576 ath10k_bus_str(ar->hif.bus), 1577 ar->id.vendor, ar->id.device, 1578 ar->id.subsystem_vendor, ar->id.subsystem_device, variant); 1579 out: 1580 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot using board name '%s'\n", name); 1581 1582 return 0; 1583 } 1584 1585 static int ath10k_core_create_eboard_name(struct ath10k *ar, char *name, 1586 size_t name_len) 1587 { 1588 if (ar->id.bmi_ids_valid) { 1589 scnprintf(name, name_len, 1590 "bus=%s,bmi-chip-id=%d,bmi-eboard-id=%d", 1591 ath10k_bus_str(ar->hif.bus), 1592 ar->id.bmi_chip_id, 1593 ar->id.bmi_eboard_id); 1594 1595 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot using eboard name '%s'\n", name); 1596 return 0; 1597 } 1598 /* Fallback if returned board id is zero */ 1599 return -1; 1600 } 1601 1602 int ath10k_core_fetch_board_file(struct ath10k *ar, int bd_ie_type) 1603 { 1604 char boardname[100], fallback_boardname1[100], fallback_boardname2[100]; 1605 int ret; 1606 1607 if (bd_ie_type == ATH10K_BD_IE_BOARD) { 1608 /* With variant and chip id */ 1609 ret = ath10k_core_create_board_name(ar, boardname, 1610 sizeof(boardname), true, 1611 true); 1612 if (ret) { 1613 ath10k_err(ar, "failed to create board name: %d", ret); 1614 return ret; 1615 } 1616 1617 /* Without variant and only chip-id */ 1618 ret = ath10k_core_create_board_name(ar, fallback_boardname1, 1619 sizeof(boardname), false, 1620 true); 1621 if (ret) { 1622 ath10k_err(ar, "failed to create 1st fallback board name: %d", 1623 ret); 1624 return ret; 1625 } 1626 1627 /* Without variant and without chip-id */ 1628 ret = ath10k_core_create_board_name(ar, fallback_boardname2, 1629 sizeof(boardname), false, 1630 false); 1631 if (ret) { 1632 ath10k_err(ar, "failed to create 2nd fallback board name: %d", 1633 ret); 1634 return ret; 1635 } 1636 } else if (bd_ie_type == ATH10K_BD_IE_BOARD_EXT) { 1637 ret = ath10k_core_create_eboard_name(ar, boardname, 1638 sizeof(boardname)); 1639 if (ret) { 1640 ath10k_err(ar, "fallback to eboard.bin since board id 0"); 1641 goto fallback; 1642 } 1643 } 1644 1645 ar->bd_api = 2; 1646 ret = ath10k_core_fetch_board_data_api_n(ar, boardname, 1647 fallback_boardname1, 1648 fallback_boardname2, 1649 ATH10K_BOARD_API2_FILE); 1650 if (!ret) 1651 goto success; 1652 1653 fallback: 1654 ar->bd_api = 1; 1655 ret = ath10k_core_fetch_board_data_api_1(ar, bd_ie_type); 1656 if (ret) { 1657 ath10k_err(ar, "failed to fetch board-2.bin or board.bin from %s\n", 1658 ar->hw_params.fw.dir); 1659 return ret; 1660 } 1661 1662 success: 1663 ath10k_dbg(ar, ATH10K_DBG_BOOT, "using board api %d\n", ar->bd_api); 1664 return 0; 1665 } 1666 EXPORT_SYMBOL(ath10k_core_fetch_board_file); 1667 1668 static int ath10k_core_get_ext_board_id_from_otp(struct ath10k *ar) 1669 { 1670 u32 result, address; 1671 u8 ext_board_id; 1672 int ret; 1673 1674 address = ar->hw_params.patch_load_addr; 1675 1676 if (!ar->normal_mode_fw.fw_file.otp_data || 1677 !ar->normal_mode_fw.fw_file.otp_len) { 1678 ath10k_warn(ar, 1679 "failed to retrieve extended board id due to otp binary missing\n"); 1680 return -ENODATA; 1681 } 1682 1683 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1684 "boot upload otp to 0x%x len %zd for ext board id\n", 1685 address, ar->normal_mode_fw.fw_file.otp_len); 1686 1687 ret = ath10k_bmi_fast_download(ar, address, 1688 ar->normal_mode_fw.fw_file.otp_data, 1689 ar->normal_mode_fw.fw_file.otp_len); 1690 if (ret) { 1691 ath10k_err(ar, "could not write otp for ext board id check: %d\n", 1692 ret); 1693 return ret; 1694 } 1695 1696 ret = ath10k_bmi_execute(ar, address, BMI_PARAM_GET_EXT_BOARD_ID, &result); 1697 if (ret) { 1698 ath10k_err(ar, "could not execute otp for ext board id check: %d\n", 1699 ret); 1700 return ret; 1701 } 1702 1703 if (!result) { 1704 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1705 "ext board id does not exist in otp, ignore it\n"); 1706 return -EOPNOTSUPP; 1707 } 1708 1709 ext_board_id = result & ATH10K_BMI_EBOARD_ID_STATUS_MASK; 1710 1711 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1712 "boot get otp ext board id result 0x%08x ext_board_id %d\n", 1713 result, ext_board_id); 1714 1715 ar->id.bmi_eboard_id = ext_board_id; 1716 1717 return 0; 1718 } 1719 1720 static int ath10k_download_board_data(struct ath10k *ar, const void *data, 1721 size_t data_len) 1722 { 1723 u32 board_data_size = ar->hw_params.fw.board_size; 1724 u32 eboard_data_size = ar->hw_params.fw.ext_board_size; 1725 u32 board_address; 1726 u32 ext_board_address; 1727 int ret; 1728 1729 ret = ath10k_push_board_ext_data(ar, data, data_len); 1730 if (ret) { 1731 ath10k_err(ar, "could not push board ext data (%d)\n", ret); 1732 goto exit; 1733 } 1734 1735 ret = ath10k_bmi_read32(ar, hi_board_data, &board_address); 1736 if (ret) { 1737 ath10k_err(ar, "could not read board data addr (%d)\n", ret); 1738 goto exit; 1739 } 1740 1741 ret = ath10k_bmi_write_memory(ar, board_address, data, 1742 min_t(u32, board_data_size, 1743 data_len)); 1744 if (ret) { 1745 ath10k_err(ar, "could not write board data (%d)\n", ret); 1746 goto exit; 1747 } 1748 1749 ret = ath10k_bmi_write32(ar, hi_board_data_initialized, 1); 1750 if (ret) { 1751 ath10k_err(ar, "could not write board data bit (%d)\n", ret); 1752 goto exit; 1753 } 1754 1755 if (!ar->id.ext_bid_supported) 1756 goto exit; 1757 1758 /* Extended board data download */ 1759 ret = ath10k_core_get_ext_board_id_from_otp(ar); 1760 if (ret == -EOPNOTSUPP) { 1761 /* Not fetching ext_board_data if ext board id is 0 */ 1762 ath10k_dbg(ar, ATH10K_DBG_BOOT, "otp returned ext board id 0\n"); 1763 return 0; 1764 } else if (ret) { 1765 ath10k_err(ar, "failed to get extended board id: %d\n", ret); 1766 goto exit; 1767 } 1768 1769 ret = ath10k_core_fetch_board_file(ar, ATH10K_BD_IE_BOARD_EXT); 1770 if (ret) 1771 goto exit; 1772 1773 if (ar->normal_mode_fw.ext_board_data) { 1774 ext_board_address = board_address + EXT_BOARD_ADDRESS_OFFSET; 1775 ath10k_dbg(ar, ATH10K_DBG_BOOT, 1776 "boot writing ext board data to addr 0x%x", 1777 ext_board_address); 1778 ret = ath10k_bmi_write_memory(ar, ext_board_address, 1779 ar->normal_mode_fw.ext_board_data, 1780 min_t(u32, eboard_data_size, data_len)); 1781 if (ret) 1782 ath10k_err(ar, "failed to write ext board data: %d\n", ret); 1783 } 1784 1785 exit: 1786 return ret; 1787 } 1788 1789 static int ath10k_download_and_run_otp(struct ath10k *ar) 1790 { 1791 u32 result, address = ar->hw_params.patch_load_addr; 1792 u32 bmi_otp_exe_param = ar->hw_params.otp_exe_param; 1793 int ret; 1794 1795 ret = ath10k_download_board_data(ar, 1796 ar->running_fw->board_data, 1797 ar->running_fw->board_len); 1798 if (ret) { 1799 ath10k_err(ar, "failed to download board data: %d\n", ret); 1800 return ret; 1801 } 1802 1803 /* OTP is optional */ 1804 1805 if (!ar->running_fw->fw_file.otp_data || 1806 !ar->running_fw->fw_file.otp_len) { 1807 ath10k_warn(ar, "Not running otp, calibration will be incorrect (otp-data %pK otp_len %zd)!\n", 1808 ar->running_fw->fw_file.otp_data, 1809 ar->running_fw->fw_file.otp_len); 1810 return 0; 1811 } 1812 1813 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot upload otp to 0x%x len %zd\n", 1814 address, ar->running_fw->fw_file.otp_len); 1815 1816 ret = ath10k_bmi_fast_download(ar, address, 1817 ar->running_fw->fw_file.otp_data, 1818 ar->running_fw->fw_file.otp_len); 1819 if (ret) { 1820 ath10k_err(ar, "could not write otp (%d)\n", ret); 1821 return ret; 1822 } 1823 1824 /* As of now pre-cal is valid for 10_4 variants */ 1825 if (ar->cal_mode == ATH10K_PRE_CAL_MODE_DT || 1826 ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE || 1827 ar->cal_mode == ATH10K_PRE_CAL_MODE_NVMEM) 1828 bmi_otp_exe_param = BMI_PARAM_FLASH_SECTION_ALL; 1829 1830 ret = ath10k_bmi_execute(ar, address, bmi_otp_exe_param, &result); 1831 if (ret) { 1832 ath10k_err(ar, "could not execute otp (%d)\n", ret); 1833 return ret; 1834 } 1835 1836 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot otp execute result %d\n", result); 1837 1838 if (!(skip_otp || test_bit(ATH10K_FW_FEATURE_IGNORE_OTP_RESULT, 1839 ar->running_fw->fw_file.fw_features)) && 1840 result != 0) { 1841 ath10k_err(ar, "otp calibration failed: %d", result); 1842 return -EINVAL; 1843 } 1844 1845 return 0; 1846 } 1847 1848 static int ath10k_download_cal_file(struct ath10k *ar, 1849 const struct firmware *file) 1850 { 1851 int ret; 1852 1853 if (!file) 1854 return -ENOENT; 1855 1856 if (IS_ERR(file)) 1857 return PTR_ERR(file); 1858 1859 ret = ath10k_download_board_data(ar, file->data, file->size); 1860 if (ret) { 1861 ath10k_err(ar, "failed to download cal_file data: %d\n", ret); 1862 return ret; 1863 } 1864 1865 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot cal file downloaded\n"); 1866 1867 return 0; 1868 } 1869 1870 static int ath10k_download_cal_dt(struct ath10k *ar, const char *dt_name) 1871 { 1872 struct device_node *node; 1873 int data_len; 1874 void *data; 1875 int ret; 1876 1877 node = ar->dev->of_node; 1878 if (!node) 1879 /* Device Tree is optional, don't print any warnings if 1880 * there's no node for ath10k. 1881 */ 1882 return -ENOENT; 1883 1884 if (!of_get_property(node, dt_name, &data_len)) { 1885 /* The calibration data node is optional */ 1886 return -ENOENT; 1887 } 1888 1889 if (data_len != ar->hw_params.cal_data_len) { 1890 ath10k_warn(ar, "invalid calibration data length in DT: %d\n", 1891 data_len); 1892 ret = -EMSGSIZE; 1893 goto out; 1894 } 1895 1896 data = kmalloc(data_len, GFP_KERNEL); 1897 if (!data) { 1898 ret = -ENOMEM; 1899 goto out; 1900 } 1901 1902 ret = of_property_read_u8_array(node, dt_name, data, data_len); 1903 if (ret) { 1904 ath10k_warn(ar, "failed to read calibration data from DT: %d\n", 1905 ret); 1906 goto out_free; 1907 } 1908 1909 ret = ath10k_download_board_data(ar, data, data_len); 1910 if (ret) { 1911 ath10k_warn(ar, "failed to download calibration data from Device Tree: %d\n", 1912 ret); 1913 goto out_free; 1914 } 1915 1916 ret = 0; 1917 1918 out_free: 1919 kfree(data); 1920 1921 out: 1922 return ret; 1923 } 1924 1925 static int ath10k_download_cal_eeprom(struct ath10k *ar) 1926 { 1927 size_t data_len; 1928 void *data = NULL; 1929 int ret; 1930 1931 ret = ath10k_hif_fetch_cal_eeprom(ar, &data, &data_len); 1932 if (ret) { 1933 if (ret != -EOPNOTSUPP) 1934 ath10k_warn(ar, "failed to read calibration data from EEPROM: %d\n", 1935 ret); 1936 goto out_free; 1937 } 1938 1939 ret = ath10k_download_board_data(ar, data, data_len); 1940 if (ret) { 1941 ath10k_warn(ar, "failed to download calibration data from EEPROM: %d\n", 1942 ret); 1943 goto out_free; 1944 } 1945 1946 ret = 0; 1947 1948 out_free: 1949 kfree(data); 1950 1951 return ret; 1952 } 1953 1954 static int ath10k_download_cal_nvmem(struct ath10k *ar, const char *cell_name) 1955 { 1956 struct nvmem_cell *cell; 1957 void *buf; 1958 size_t len; 1959 int ret; 1960 1961 cell = devm_nvmem_cell_get(ar->dev, cell_name); 1962 if (IS_ERR(cell)) { 1963 ret = PTR_ERR(cell); 1964 return ret; 1965 } 1966 1967 buf = nvmem_cell_read(cell, &len); 1968 if (IS_ERR(buf)) 1969 return PTR_ERR(buf); 1970 1971 if (ar->hw_params.cal_data_len != len) { 1972 kfree(buf); 1973 ath10k_warn(ar, "invalid calibration data length in nvmem-cell '%s': %zu != %u\n", 1974 cell_name, len, ar->hw_params.cal_data_len); 1975 return -EMSGSIZE; 1976 } 1977 1978 ret = ath10k_download_board_data(ar, buf, len); 1979 kfree(buf); 1980 if (ret) 1981 ath10k_warn(ar, "failed to download calibration data from nvmem-cell '%s': %d\n", 1982 cell_name, ret); 1983 1984 return ret; 1985 } 1986 1987 int ath10k_core_fetch_firmware_api_n(struct ath10k *ar, const char *name, 1988 struct ath10k_fw_file *fw_file) 1989 { 1990 size_t magic_len, len, ie_len; 1991 int ie_id, i, index, bit, ret; 1992 struct ath10k_fw_ie *hdr; 1993 const u8 *data; 1994 __le32 *timestamp, *version; 1995 1996 /* first fetch the firmware file (firmware-*.bin) */ 1997 fw_file->firmware = ath10k_fetch_fw_file(ar, ar->hw_params.fw.dir, 1998 name); 1999 if (IS_ERR(fw_file->firmware)) 2000 return PTR_ERR(fw_file->firmware); 2001 2002 data = fw_file->firmware->data; 2003 len = fw_file->firmware->size; 2004 2005 /* magic also includes the null byte, check that as well */ 2006 magic_len = strlen(ATH10K_FIRMWARE_MAGIC) + 1; 2007 2008 if (len < magic_len) { 2009 ath10k_err(ar, "firmware file '%s/%s' too small to contain magic: %zu\n", 2010 ar->hw_params.fw.dir, name, len); 2011 ret = -EINVAL; 2012 goto err; 2013 } 2014 2015 if (memcmp(data, ATH10K_FIRMWARE_MAGIC, magic_len) != 0) { 2016 ath10k_err(ar, "invalid firmware magic\n"); 2017 ret = -EINVAL; 2018 goto err; 2019 } 2020 2021 /* jump over the padding */ 2022 magic_len = ALIGN(magic_len, 4); 2023 2024 len -= magic_len; 2025 data += magic_len; 2026 2027 /* loop elements */ 2028 while (len > sizeof(struct ath10k_fw_ie)) { 2029 hdr = (struct ath10k_fw_ie *)data; 2030 2031 ie_id = le32_to_cpu(hdr->id); 2032 ie_len = le32_to_cpu(hdr->len); 2033 2034 len -= sizeof(*hdr); 2035 data += sizeof(*hdr); 2036 2037 if (len < ie_len) { 2038 ath10k_err(ar, "invalid length for FW IE %d (%zu < %zu)\n", 2039 ie_id, len, ie_len); 2040 ret = -EINVAL; 2041 goto err; 2042 } 2043 2044 switch (ie_id) { 2045 case ATH10K_FW_IE_FW_VERSION: 2046 if (ie_len > sizeof(fw_file->fw_version) - 1) 2047 break; 2048 2049 memcpy(fw_file->fw_version, data, ie_len); 2050 fw_file->fw_version[ie_len] = '\0'; 2051 2052 ath10k_dbg(ar, ATH10K_DBG_BOOT, 2053 "found fw version %s\n", 2054 fw_file->fw_version); 2055 break; 2056 case ATH10K_FW_IE_TIMESTAMP: 2057 if (ie_len != sizeof(u32)) 2058 break; 2059 2060 timestamp = (__le32 *)data; 2061 2062 ath10k_dbg(ar, ATH10K_DBG_BOOT, "found fw timestamp %d\n", 2063 le32_to_cpup(timestamp)); 2064 break; 2065 case ATH10K_FW_IE_FEATURES: 2066 ath10k_dbg(ar, ATH10K_DBG_BOOT, 2067 "found firmware features ie (%zd B)\n", 2068 ie_len); 2069 2070 for (i = 0; i < ATH10K_FW_FEATURE_COUNT; i++) { 2071 index = i / 8; 2072 bit = i % 8; 2073 2074 if (index == ie_len) 2075 break; 2076 2077 if (data[index] & (1 << bit)) { 2078 ath10k_dbg(ar, ATH10K_DBG_BOOT, 2079 "Enabling feature bit: %i\n", 2080 i); 2081 __set_bit(i, fw_file->fw_features); 2082 } 2083 } 2084 2085 ath10k_dbg_dump(ar, ATH10K_DBG_BOOT, "features", "", 2086 fw_file->fw_features, 2087 sizeof(fw_file->fw_features)); 2088 break; 2089 case ATH10K_FW_IE_FW_IMAGE: 2090 ath10k_dbg(ar, ATH10K_DBG_BOOT, 2091 "found fw image ie (%zd B)\n", 2092 ie_len); 2093 2094 fw_file->firmware_data = data; 2095 fw_file->firmware_len = ie_len; 2096 2097 break; 2098 case ATH10K_FW_IE_OTP_IMAGE: 2099 ath10k_dbg(ar, ATH10K_DBG_BOOT, 2100 "found otp image ie (%zd B)\n", 2101 ie_len); 2102 2103 fw_file->otp_data = data; 2104 fw_file->otp_len = ie_len; 2105 2106 break; 2107 case ATH10K_FW_IE_WMI_OP_VERSION: 2108 if (ie_len != sizeof(u32)) 2109 break; 2110 2111 version = (__le32 *)data; 2112 2113 fw_file->wmi_op_version = le32_to_cpup(version); 2114 2115 ath10k_dbg(ar, ATH10K_DBG_BOOT, "found fw ie wmi op version %d\n", 2116 fw_file->wmi_op_version); 2117 break; 2118 case ATH10K_FW_IE_HTT_OP_VERSION: 2119 if (ie_len != sizeof(u32)) 2120 break; 2121 2122 version = (__le32 *)data; 2123 2124 fw_file->htt_op_version = le32_to_cpup(version); 2125 2126 ath10k_dbg(ar, ATH10K_DBG_BOOT, "found fw ie htt op version %d\n", 2127 fw_file->htt_op_version); 2128 break; 2129 case ATH10K_FW_IE_FW_CODE_SWAP_IMAGE: 2130 ath10k_dbg(ar, ATH10K_DBG_BOOT, 2131 "found fw code swap image ie (%zd B)\n", 2132 ie_len); 2133 fw_file->codeswap_data = data; 2134 fw_file->codeswap_len = ie_len; 2135 break; 2136 default: 2137 ath10k_warn(ar, "Unknown FW IE: %u\n", 2138 le32_to_cpu(hdr->id)); 2139 break; 2140 } 2141 2142 /* jump over the padding */ 2143 ie_len = ALIGN(ie_len, 4); 2144 2145 len -= ie_len; 2146 data += ie_len; 2147 } 2148 2149 if (!test_bit(ATH10K_FW_FEATURE_NON_BMI, fw_file->fw_features) && 2150 (!fw_file->firmware_data || !fw_file->firmware_len)) { 2151 ath10k_warn(ar, "No ATH10K_FW_IE_FW_IMAGE found from '%s/%s', skipping\n", 2152 ar->hw_params.fw.dir, name); 2153 ret = -ENOMEDIUM; 2154 goto err; 2155 } 2156 2157 return 0; 2158 2159 err: 2160 ath10k_core_free_firmware_files(ar); 2161 return ret; 2162 } 2163 2164 static void ath10k_core_get_fw_name(struct ath10k *ar, char *fw_name, 2165 size_t fw_name_len, int fw_api) 2166 { 2167 switch (ar->hif.bus) { 2168 case ATH10K_BUS_SDIO: 2169 case ATH10K_BUS_USB: 2170 scnprintf(fw_name, fw_name_len, "%s-%s-%d.bin", 2171 ATH10K_FW_FILE_BASE, ath10k_bus_str(ar->hif.bus), 2172 fw_api); 2173 break; 2174 case ATH10K_BUS_PCI: 2175 case ATH10K_BUS_AHB: 2176 case ATH10K_BUS_SNOC: 2177 scnprintf(fw_name, fw_name_len, "%s-%d.bin", 2178 ATH10K_FW_FILE_BASE, fw_api); 2179 break; 2180 } 2181 } 2182 2183 static int ath10k_core_fetch_firmware_files(struct ath10k *ar) 2184 { 2185 int ret, i; 2186 char fw_name[100]; 2187 2188 /* calibration file is optional, don't check for any errors */ 2189 ath10k_fetch_cal_file(ar); 2190 2191 for (i = ATH10K_FW_API_MAX; i >= ATH10K_FW_API_MIN; i--) { 2192 ar->fw_api = i; 2193 ath10k_dbg(ar, ATH10K_DBG_BOOT, "trying fw api %d\n", 2194 ar->fw_api); 2195 2196 ath10k_core_get_fw_name(ar, fw_name, sizeof(fw_name), ar->fw_api); 2197 ret = ath10k_core_fetch_firmware_api_n(ar, fw_name, 2198 &ar->normal_mode_fw.fw_file); 2199 if (!ret) 2200 goto success; 2201 } 2202 2203 /* we end up here if we couldn't fetch any firmware */ 2204 2205 ath10k_err(ar, "Failed to find firmware-N.bin (N between %d and %d) from %s: %d", 2206 ATH10K_FW_API_MIN, ATH10K_FW_API_MAX, ar->hw_params.fw.dir, 2207 ret); 2208 2209 return ret; 2210 2211 success: 2212 ath10k_dbg(ar, ATH10K_DBG_BOOT, "using fw api %d\n", ar->fw_api); 2213 2214 return 0; 2215 } 2216 2217 static int ath10k_core_pre_cal_download(struct ath10k *ar) 2218 { 2219 int ret; 2220 2221 ret = ath10k_download_cal_nvmem(ar, "pre-calibration"); 2222 if (ret == 0) { 2223 ar->cal_mode = ATH10K_PRE_CAL_MODE_NVMEM; 2224 goto success; 2225 } else if (ret == -EPROBE_DEFER) { 2226 return ret; 2227 } 2228 2229 ath10k_dbg(ar, ATH10K_DBG_BOOT, 2230 "boot did not find a pre-calibration nvmem-cell, try file next: %d\n", 2231 ret); 2232 2233 ret = ath10k_download_cal_file(ar, ar->pre_cal_file); 2234 if (ret == 0) { 2235 ar->cal_mode = ATH10K_PRE_CAL_MODE_FILE; 2236 goto success; 2237 } 2238 2239 ath10k_dbg(ar, ATH10K_DBG_BOOT, 2240 "boot did not find a pre calibration file, try DT next: %d\n", 2241 ret); 2242 2243 ret = ath10k_download_cal_dt(ar, "qcom,ath10k-pre-calibration-data"); 2244 if (ret) { 2245 ath10k_dbg(ar, ATH10K_DBG_BOOT, 2246 "unable to load pre cal data from DT: %d\n", ret); 2247 return ret; 2248 } 2249 ar->cal_mode = ATH10K_PRE_CAL_MODE_DT; 2250 2251 success: 2252 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot using calibration mode %s\n", 2253 ath10k_cal_mode_str(ar->cal_mode)); 2254 2255 return 0; 2256 } 2257 2258 static int ath10k_core_pre_cal_config(struct ath10k *ar) 2259 { 2260 int ret; 2261 2262 ret = ath10k_core_pre_cal_download(ar); 2263 if (ret) { 2264 ath10k_dbg(ar, ATH10K_DBG_BOOT, 2265 "failed to load pre cal data: %d\n", ret); 2266 return ret; 2267 } 2268 2269 ret = ath10k_core_get_board_id_from_otp(ar); 2270 if (ret) { 2271 ath10k_err(ar, "failed to get board id: %d\n", ret); 2272 return ret; 2273 } 2274 2275 ret = ath10k_download_and_run_otp(ar); 2276 if (ret) { 2277 ath10k_err(ar, "failed to run otp: %d\n", ret); 2278 return ret; 2279 } 2280 2281 ath10k_dbg(ar, ATH10K_DBG_BOOT, 2282 "pre cal configuration done successfully\n"); 2283 2284 return 0; 2285 } 2286 2287 static int ath10k_download_cal_data(struct ath10k *ar) 2288 { 2289 int ret; 2290 2291 ret = ath10k_core_pre_cal_config(ar); 2292 if (ret == 0) 2293 return 0; 2294 2295 ath10k_dbg(ar, ATH10K_DBG_BOOT, 2296 "pre cal download procedure failed, try cal file: %d\n", 2297 ret); 2298 2299 ret = ath10k_download_cal_nvmem(ar, "calibration"); 2300 if (ret == 0) { 2301 ar->cal_mode = ATH10K_CAL_MODE_NVMEM; 2302 goto done; 2303 } else if (ret == -EPROBE_DEFER) { 2304 return ret; 2305 } 2306 2307 ath10k_dbg(ar, ATH10K_DBG_BOOT, 2308 "boot did not find a calibration nvmem-cell, try file next: %d\n", 2309 ret); 2310 2311 ret = ath10k_download_cal_file(ar, ar->cal_file); 2312 if (ret == 0) { 2313 ar->cal_mode = ATH10K_CAL_MODE_FILE; 2314 goto done; 2315 } 2316 2317 ath10k_dbg(ar, ATH10K_DBG_BOOT, 2318 "boot did not find a calibration file, try DT next: %d\n", 2319 ret); 2320 2321 ret = ath10k_download_cal_dt(ar, "qcom,ath10k-calibration-data"); 2322 if (ret == 0) { 2323 ar->cal_mode = ATH10K_CAL_MODE_DT; 2324 goto done; 2325 } 2326 2327 ath10k_dbg(ar, ATH10K_DBG_BOOT, 2328 "boot did not find DT entry, try target EEPROM next: %d\n", 2329 ret); 2330 2331 ret = ath10k_download_cal_eeprom(ar); 2332 if (ret == 0) { 2333 ar->cal_mode = ATH10K_CAL_MODE_EEPROM; 2334 goto done; 2335 } 2336 2337 ath10k_dbg(ar, ATH10K_DBG_BOOT, 2338 "boot did not find target EEPROM entry, try OTP next: %d\n", 2339 ret); 2340 2341 ret = ath10k_download_and_run_otp(ar); 2342 if (ret) { 2343 ath10k_err(ar, "failed to run otp: %d\n", ret); 2344 return ret; 2345 } 2346 2347 ar->cal_mode = ATH10K_CAL_MODE_OTP; 2348 2349 done: 2350 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot using calibration mode %s\n", 2351 ath10k_cal_mode_str(ar->cal_mode)); 2352 return 0; 2353 } 2354 2355 static void ath10k_core_fetch_btcoex_dt(struct ath10k *ar) 2356 { 2357 struct device_node *node; 2358 u8 coex_support = 0; 2359 int ret; 2360 2361 node = ar->dev->of_node; 2362 if (!node) 2363 goto out; 2364 2365 ret = of_property_read_u8(node, "qcom,coexist-support", &coex_support); 2366 if (ret) { 2367 ar->coex_support = true; 2368 goto out; 2369 } 2370 2371 if (coex_support) { 2372 ar->coex_support = true; 2373 } else { 2374 ar->coex_support = false; 2375 ar->coex_gpio_pin = -1; 2376 goto out; 2377 } 2378 2379 ret = of_property_read_u32(node, "qcom,coexist-gpio-pin", 2380 &ar->coex_gpio_pin); 2381 if (ret) 2382 ar->coex_gpio_pin = -1; 2383 2384 out: 2385 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot coex_support %d coex_gpio_pin %d\n", 2386 ar->coex_support, ar->coex_gpio_pin); 2387 } 2388 2389 static int ath10k_init_uart(struct ath10k *ar) 2390 { 2391 int ret; 2392 2393 /* 2394 * Explicitly setting UART prints to zero as target turns it on 2395 * based on scratch registers. 2396 */ 2397 ret = ath10k_bmi_write32(ar, hi_serial_enable, 0); 2398 if (ret) { 2399 ath10k_warn(ar, "could not disable UART prints (%d)\n", ret); 2400 return ret; 2401 } 2402 2403 if (!uart_print) { 2404 if (ar->hw_params.uart_pin_workaround) { 2405 ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin, 2406 ar->hw_params.uart_pin); 2407 if (ret) { 2408 ath10k_warn(ar, "failed to set UART TX pin: %d", 2409 ret); 2410 return ret; 2411 } 2412 } 2413 2414 return 0; 2415 } 2416 2417 ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin, ar->hw_params.uart_pin); 2418 if (ret) { 2419 ath10k_warn(ar, "could not enable UART prints (%d)\n", ret); 2420 return ret; 2421 } 2422 2423 ret = ath10k_bmi_write32(ar, hi_serial_enable, 1); 2424 if (ret) { 2425 ath10k_warn(ar, "could not enable UART prints (%d)\n", ret); 2426 return ret; 2427 } 2428 2429 /* Set the UART baud rate to 19200. */ 2430 ret = ath10k_bmi_write32(ar, hi_desired_baud_rate, 19200); 2431 if (ret) { 2432 ath10k_warn(ar, "could not set the baud rate (%d)\n", ret); 2433 return ret; 2434 } 2435 2436 ath10k_info(ar, "UART prints enabled\n"); 2437 return 0; 2438 } 2439 2440 static int ath10k_init_hw_params(struct ath10k *ar) 2441 { 2442 const struct ath10k_hw_params *hw_params; 2443 int i; 2444 2445 for (i = 0; i < ARRAY_SIZE(ath10k_hw_params_list); i++) { 2446 hw_params = &ath10k_hw_params_list[i]; 2447 2448 if (hw_params->bus == ar->hif.bus && 2449 hw_params->id == ar->target_version && 2450 hw_params->dev_id == ar->dev_id) 2451 break; 2452 } 2453 2454 if (i == ARRAY_SIZE(ath10k_hw_params_list)) { 2455 ath10k_err(ar, "Unsupported hardware version: 0x%x\n", 2456 ar->target_version); 2457 return -EINVAL; 2458 } 2459 2460 ar->hw_params = *hw_params; 2461 2462 ath10k_dbg(ar, ATH10K_DBG_BOOT, "Hardware name %s version 0x%x\n", 2463 ar->hw_params.name, ar->target_version); 2464 2465 return 0; 2466 } 2467 2468 void ath10k_core_start_recovery(struct ath10k *ar) 2469 { 2470 if (test_and_set_bit(ATH10K_FLAG_RESTARTING, &ar->dev_flags)) { 2471 ath10k_warn(ar, "already restarting\n"); 2472 return; 2473 } 2474 2475 queue_work(ar->workqueue, &ar->restart_work); 2476 } 2477 EXPORT_SYMBOL(ath10k_core_start_recovery); 2478 2479 void ath10k_core_napi_enable(struct ath10k *ar) 2480 { 2481 lockdep_assert_held(&ar->conf_mutex); 2482 2483 if (test_bit(ATH10K_FLAG_NAPI_ENABLED, &ar->dev_flags)) 2484 return; 2485 2486 napi_enable(&ar->napi); 2487 set_bit(ATH10K_FLAG_NAPI_ENABLED, &ar->dev_flags); 2488 } 2489 EXPORT_SYMBOL(ath10k_core_napi_enable); 2490 2491 void ath10k_core_napi_sync_disable(struct ath10k *ar) 2492 { 2493 lockdep_assert_held(&ar->conf_mutex); 2494 2495 if (!test_bit(ATH10K_FLAG_NAPI_ENABLED, &ar->dev_flags)) 2496 return; 2497 2498 napi_synchronize(&ar->napi); 2499 napi_disable(&ar->napi); 2500 clear_bit(ATH10K_FLAG_NAPI_ENABLED, &ar->dev_flags); 2501 } 2502 EXPORT_SYMBOL(ath10k_core_napi_sync_disable); 2503 2504 static void ath10k_core_restart(struct work_struct *work) 2505 { 2506 struct ath10k *ar = container_of(work, struct ath10k, restart_work); 2507 int ret; 2508 2509 set_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags); 2510 2511 /* Place a barrier to make sure the compiler doesn't reorder 2512 * CRASH_FLUSH and calling other functions. 2513 */ 2514 barrier(); 2515 2516 ieee80211_stop_queues(ar->hw); 2517 ath10k_drain_tx(ar); 2518 complete(&ar->scan.started); 2519 complete(&ar->scan.completed); 2520 complete(&ar->scan.on_channel); 2521 complete(&ar->offchan_tx_completed); 2522 complete(&ar->install_key_done); 2523 complete(&ar->vdev_setup_done); 2524 complete(&ar->vdev_delete_done); 2525 complete(&ar->thermal.wmi_sync); 2526 complete(&ar->bss_survey_done); 2527 wake_up(&ar->htt.empty_tx_wq); 2528 wake_up(&ar->wmi.tx_credits_wq); 2529 wake_up(&ar->peer_mapping_wq); 2530 2531 /* TODO: We can have one instance of cancelling coverage_class_work by 2532 * moving it to ath10k_halt(), so that both stop() and restart() would 2533 * call that but it takes conf_mutex() and if we call cancel_work_sync() 2534 * with conf_mutex it will deadlock. 2535 */ 2536 cancel_work_sync(&ar->set_coverage_class_work); 2537 2538 mutex_lock(&ar->conf_mutex); 2539 2540 switch (ar->state) { 2541 case ATH10K_STATE_ON: 2542 ar->state = ATH10K_STATE_RESTARTING; 2543 ath10k_halt(ar); 2544 ath10k_scan_finish(ar); 2545 ieee80211_restart_hw(ar->hw); 2546 break; 2547 case ATH10K_STATE_OFF: 2548 /* this can happen if driver is being unloaded 2549 * or if the crash happens during FW probing 2550 */ 2551 ath10k_warn(ar, "cannot restart a device that hasn't been started\n"); 2552 break; 2553 case ATH10K_STATE_RESTARTING: 2554 /* hw restart might be requested from multiple places */ 2555 break; 2556 case ATH10K_STATE_RESTARTED: 2557 ar->state = ATH10K_STATE_WEDGED; 2558 fallthrough; 2559 case ATH10K_STATE_WEDGED: 2560 ath10k_warn(ar, "device is wedged, will not restart\n"); 2561 break; 2562 case ATH10K_STATE_UTF: 2563 ath10k_warn(ar, "firmware restart in UTF mode not supported\n"); 2564 break; 2565 } 2566 2567 mutex_unlock(&ar->conf_mutex); 2568 2569 ret = ath10k_coredump_submit(ar); 2570 if (ret) 2571 ath10k_warn(ar, "failed to send firmware crash dump via devcoredump: %d", 2572 ret); 2573 2574 complete(&ar->driver_recovery); 2575 } 2576 2577 static void ath10k_core_set_coverage_class_work(struct work_struct *work) 2578 { 2579 struct ath10k *ar = container_of(work, struct ath10k, 2580 set_coverage_class_work); 2581 2582 if (ar->hw_params.hw_ops->set_coverage_class) 2583 ar->hw_params.hw_ops->set_coverage_class(ar, -1); 2584 } 2585 2586 static int ath10k_core_init_firmware_features(struct ath10k *ar) 2587 { 2588 struct ath10k_fw_file *fw_file = &ar->normal_mode_fw.fw_file; 2589 int max_num_peers; 2590 2591 if (test_bit(ATH10K_FW_FEATURE_WMI_10_2, fw_file->fw_features) && 2592 !test_bit(ATH10K_FW_FEATURE_WMI_10X, fw_file->fw_features)) { 2593 ath10k_err(ar, "feature bits corrupted: 10.2 feature requires 10.x feature to be set as well"); 2594 return -EINVAL; 2595 } 2596 2597 if (fw_file->wmi_op_version >= ATH10K_FW_WMI_OP_VERSION_MAX) { 2598 ath10k_err(ar, "unsupported WMI OP version (max %d): %d\n", 2599 ATH10K_FW_WMI_OP_VERSION_MAX, fw_file->wmi_op_version); 2600 return -EINVAL; 2601 } 2602 2603 ar->wmi.rx_decap_mode = ATH10K_HW_TXRX_NATIVE_WIFI; 2604 switch (ath10k_cryptmode_param) { 2605 case ATH10K_CRYPT_MODE_HW: 2606 clear_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags); 2607 clear_bit(ATH10K_FLAG_HW_CRYPTO_DISABLED, &ar->dev_flags); 2608 break; 2609 case ATH10K_CRYPT_MODE_SW: 2610 if (!test_bit(ATH10K_FW_FEATURE_RAW_MODE_SUPPORT, 2611 fw_file->fw_features)) { 2612 ath10k_err(ar, "cryptmode > 0 requires raw mode support from firmware"); 2613 return -EINVAL; 2614 } 2615 2616 set_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags); 2617 set_bit(ATH10K_FLAG_HW_CRYPTO_DISABLED, &ar->dev_flags); 2618 break; 2619 default: 2620 ath10k_info(ar, "invalid cryptmode: %d\n", 2621 ath10k_cryptmode_param); 2622 return -EINVAL; 2623 } 2624 2625 ar->htt.max_num_amsdu = ATH10K_HTT_MAX_NUM_AMSDU_DEFAULT; 2626 ar->htt.max_num_ampdu = ATH10K_HTT_MAX_NUM_AMPDU_DEFAULT; 2627 2628 if (ath10k_frame_mode == ATH10K_HW_TXRX_RAW) { 2629 if (!test_bit(ATH10K_FW_FEATURE_RAW_MODE_SUPPORT, 2630 fw_file->fw_features)) { 2631 ath10k_err(ar, "rawmode = 1 requires support from firmware"); 2632 return -EINVAL; 2633 } 2634 set_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags); 2635 } 2636 2637 if (test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) { 2638 ar->wmi.rx_decap_mode = ATH10K_HW_TXRX_RAW; 2639 2640 /* Workaround: 2641 * 2642 * Firmware A-MSDU aggregation breaks with RAW Tx encap mode 2643 * and causes enormous performance issues (malformed frames, 2644 * etc). 2645 * 2646 * Disabling A-MSDU makes RAW mode stable with heavy traffic 2647 * albeit a bit slower compared to regular operation. 2648 */ 2649 ar->htt.max_num_amsdu = 1; 2650 } 2651 2652 /* Backwards compatibility for firmwares without 2653 * ATH10K_FW_IE_WMI_OP_VERSION. 2654 */ 2655 if (fw_file->wmi_op_version == ATH10K_FW_WMI_OP_VERSION_UNSET) { 2656 if (test_bit(ATH10K_FW_FEATURE_WMI_10X, fw_file->fw_features)) { 2657 if (test_bit(ATH10K_FW_FEATURE_WMI_10_2, 2658 fw_file->fw_features)) 2659 fw_file->wmi_op_version = ATH10K_FW_WMI_OP_VERSION_10_2; 2660 else 2661 fw_file->wmi_op_version = ATH10K_FW_WMI_OP_VERSION_10_1; 2662 } else { 2663 fw_file->wmi_op_version = ATH10K_FW_WMI_OP_VERSION_MAIN; 2664 } 2665 } 2666 2667 switch (fw_file->wmi_op_version) { 2668 case ATH10K_FW_WMI_OP_VERSION_MAIN: 2669 max_num_peers = TARGET_NUM_PEERS; 2670 ar->max_num_stations = TARGET_NUM_STATIONS; 2671 ar->max_num_vdevs = TARGET_NUM_VDEVS; 2672 ar->htt.max_num_pending_tx = TARGET_NUM_MSDU_DESC; 2673 ar->fw_stats_req_mask = WMI_STAT_PDEV | WMI_STAT_VDEV | 2674 WMI_STAT_PEER; 2675 ar->max_spatial_stream = WMI_MAX_SPATIAL_STREAM; 2676 break; 2677 case ATH10K_FW_WMI_OP_VERSION_10_1: 2678 case ATH10K_FW_WMI_OP_VERSION_10_2: 2679 case ATH10K_FW_WMI_OP_VERSION_10_2_4: 2680 if (ath10k_peer_stats_enabled(ar)) { 2681 max_num_peers = TARGET_10X_TX_STATS_NUM_PEERS; 2682 ar->max_num_stations = TARGET_10X_TX_STATS_NUM_STATIONS; 2683 } else { 2684 max_num_peers = TARGET_10X_NUM_PEERS; 2685 ar->max_num_stations = TARGET_10X_NUM_STATIONS; 2686 } 2687 ar->max_num_vdevs = TARGET_10X_NUM_VDEVS; 2688 ar->htt.max_num_pending_tx = TARGET_10X_NUM_MSDU_DESC; 2689 ar->fw_stats_req_mask = WMI_STAT_PEER; 2690 ar->max_spatial_stream = WMI_MAX_SPATIAL_STREAM; 2691 break; 2692 case ATH10K_FW_WMI_OP_VERSION_TLV: 2693 max_num_peers = TARGET_TLV_NUM_PEERS; 2694 ar->max_num_stations = TARGET_TLV_NUM_STATIONS; 2695 ar->max_num_vdevs = TARGET_TLV_NUM_VDEVS; 2696 ar->max_num_tdls_vdevs = TARGET_TLV_NUM_TDLS_VDEVS; 2697 if (ar->hif.bus == ATH10K_BUS_SDIO) 2698 ar->htt.max_num_pending_tx = 2699 TARGET_TLV_NUM_MSDU_DESC_HL; 2700 else 2701 ar->htt.max_num_pending_tx = TARGET_TLV_NUM_MSDU_DESC; 2702 ar->wow.max_num_patterns = TARGET_TLV_NUM_WOW_PATTERNS; 2703 ar->fw_stats_req_mask = WMI_TLV_STAT_PDEV | WMI_TLV_STAT_VDEV | 2704 WMI_TLV_STAT_PEER | WMI_TLV_STAT_PEER_EXTD; 2705 ar->max_spatial_stream = WMI_MAX_SPATIAL_STREAM; 2706 ar->wmi.mgmt_max_num_pending_tx = TARGET_TLV_MGMT_NUM_MSDU_DESC; 2707 break; 2708 case ATH10K_FW_WMI_OP_VERSION_10_4: 2709 max_num_peers = TARGET_10_4_NUM_PEERS; 2710 ar->max_num_stations = TARGET_10_4_NUM_STATIONS; 2711 ar->num_active_peers = TARGET_10_4_ACTIVE_PEERS; 2712 ar->max_num_vdevs = TARGET_10_4_NUM_VDEVS; 2713 ar->num_tids = TARGET_10_4_TGT_NUM_TIDS; 2714 ar->fw_stats_req_mask = WMI_10_4_STAT_PEER | 2715 WMI_10_4_STAT_PEER_EXTD | 2716 WMI_10_4_STAT_VDEV_EXTD; 2717 ar->max_spatial_stream = ar->hw_params.max_spatial_stream; 2718 ar->max_num_tdls_vdevs = TARGET_10_4_NUM_TDLS_VDEVS; 2719 2720 if (test_bit(ATH10K_FW_FEATURE_PEER_FLOW_CONTROL, 2721 fw_file->fw_features)) 2722 ar->htt.max_num_pending_tx = TARGET_10_4_NUM_MSDU_DESC_PFC; 2723 else 2724 ar->htt.max_num_pending_tx = TARGET_10_4_NUM_MSDU_DESC; 2725 break; 2726 case ATH10K_FW_WMI_OP_VERSION_UNSET: 2727 case ATH10K_FW_WMI_OP_VERSION_MAX: 2728 default: 2729 WARN_ON(1); 2730 return -EINVAL; 2731 } 2732 2733 if (ar->hw_params.num_peers) 2734 ar->max_num_peers = ar->hw_params.num_peers; 2735 else 2736 ar->max_num_peers = max_num_peers; 2737 2738 /* Backwards compatibility for firmwares without 2739 * ATH10K_FW_IE_HTT_OP_VERSION. 2740 */ 2741 if (fw_file->htt_op_version == ATH10K_FW_HTT_OP_VERSION_UNSET) { 2742 switch (fw_file->wmi_op_version) { 2743 case ATH10K_FW_WMI_OP_VERSION_MAIN: 2744 fw_file->htt_op_version = ATH10K_FW_HTT_OP_VERSION_MAIN; 2745 break; 2746 case ATH10K_FW_WMI_OP_VERSION_10_1: 2747 case ATH10K_FW_WMI_OP_VERSION_10_2: 2748 case ATH10K_FW_WMI_OP_VERSION_10_2_4: 2749 fw_file->htt_op_version = ATH10K_FW_HTT_OP_VERSION_10_1; 2750 break; 2751 case ATH10K_FW_WMI_OP_VERSION_TLV: 2752 fw_file->htt_op_version = ATH10K_FW_HTT_OP_VERSION_TLV; 2753 break; 2754 case ATH10K_FW_WMI_OP_VERSION_10_4: 2755 case ATH10K_FW_WMI_OP_VERSION_UNSET: 2756 case ATH10K_FW_WMI_OP_VERSION_MAX: 2757 ath10k_err(ar, "htt op version not found from fw meta data"); 2758 return -EINVAL; 2759 } 2760 } 2761 2762 return 0; 2763 } 2764 2765 static int ath10k_core_reset_rx_filter(struct ath10k *ar) 2766 { 2767 int ret; 2768 int vdev_id; 2769 int vdev_type; 2770 int vdev_subtype; 2771 const u8 *vdev_addr; 2772 2773 vdev_id = 0; 2774 vdev_type = WMI_VDEV_TYPE_STA; 2775 vdev_subtype = ath10k_wmi_get_vdev_subtype(ar, WMI_VDEV_SUBTYPE_NONE); 2776 vdev_addr = ar->mac_addr; 2777 2778 ret = ath10k_wmi_vdev_create(ar, vdev_id, vdev_type, vdev_subtype, 2779 vdev_addr); 2780 if (ret) { 2781 ath10k_err(ar, "failed to create dummy vdev: %d\n", ret); 2782 return ret; 2783 } 2784 2785 ret = ath10k_wmi_vdev_delete(ar, vdev_id); 2786 if (ret) { 2787 ath10k_err(ar, "failed to delete dummy vdev: %d\n", ret); 2788 return ret; 2789 } 2790 2791 /* WMI and HTT may use separate HIF pipes and are not guaranteed to be 2792 * serialized properly implicitly. 2793 * 2794 * Moreover (most) WMI commands have no explicit acknowledges. It is 2795 * possible to infer it implicitly by poking firmware with echo 2796 * command - getting a reply means all preceding comments have been 2797 * (mostly) processed. 2798 * 2799 * In case of vdev create/delete this is sufficient. 2800 * 2801 * Without this it's possible to end up with a race when HTT Rx ring is 2802 * started before vdev create/delete hack is complete allowing a short 2803 * window of opportunity to receive (and Tx ACK) a bunch of frames. 2804 */ 2805 ret = ath10k_wmi_barrier(ar); 2806 if (ret) { 2807 ath10k_err(ar, "failed to ping firmware: %d\n", ret); 2808 return ret; 2809 } 2810 2811 return 0; 2812 } 2813 2814 static int ath10k_core_compat_services(struct ath10k *ar) 2815 { 2816 struct ath10k_fw_file *fw_file = &ar->normal_mode_fw.fw_file; 2817 2818 /* all 10.x firmware versions support thermal throttling but don't 2819 * advertise the support via service flags so we have to hardcode 2820 * it here 2821 */ 2822 switch (fw_file->wmi_op_version) { 2823 case ATH10K_FW_WMI_OP_VERSION_10_1: 2824 case ATH10K_FW_WMI_OP_VERSION_10_2: 2825 case ATH10K_FW_WMI_OP_VERSION_10_2_4: 2826 case ATH10K_FW_WMI_OP_VERSION_10_4: 2827 set_bit(WMI_SERVICE_THERM_THROT, ar->wmi.svc_map); 2828 break; 2829 default: 2830 break; 2831 } 2832 2833 return 0; 2834 } 2835 2836 #define TGT_IRAM_READ_PER_ITR (8 * 1024) 2837 2838 static int ath10k_core_copy_target_iram(struct ath10k *ar) 2839 { 2840 const struct ath10k_hw_mem_layout *hw_mem; 2841 const struct ath10k_mem_region *tmp, *mem_region = NULL; 2842 dma_addr_t paddr; 2843 void *vaddr = NULL; 2844 u8 num_read_itr; 2845 int i, ret; 2846 u32 len, remaining_len; 2847 2848 /* copy target iram feature must work also when 2849 * ATH10K_FW_CRASH_DUMP_RAM_DATA is disabled, so 2850 * _ath10k_coredump_get_mem_layout() to accomplist that 2851 */ 2852 hw_mem = _ath10k_coredump_get_mem_layout(ar); 2853 if (!hw_mem) 2854 /* if CONFIG_DEV_COREDUMP is disabled we get NULL, then 2855 * just silently disable the feature by doing nothing 2856 */ 2857 return 0; 2858 2859 for (i = 0; i < hw_mem->region_table.size; i++) { 2860 tmp = &hw_mem->region_table.regions[i]; 2861 if (tmp->type == ATH10K_MEM_REGION_TYPE_REG) { 2862 mem_region = tmp; 2863 break; 2864 } 2865 } 2866 2867 if (!mem_region) 2868 return -ENOMEM; 2869 2870 for (i = 0; i < ar->wmi.num_mem_chunks; i++) { 2871 if (ar->wmi.mem_chunks[i].req_id == 2872 WMI_IRAM_RECOVERY_HOST_MEM_REQ_ID) { 2873 vaddr = ar->wmi.mem_chunks[i].vaddr; 2874 len = ar->wmi.mem_chunks[i].len; 2875 break; 2876 } 2877 } 2878 2879 if (!vaddr || !len) { 2880 ath10k_warn(ar, "No allocated memory for IRAM back up"); 2881 return -ENOMEM; 2882 } 2883 2884 len = (len < mem_region->len) ? len : mem_region->len; 2885 paddr = mem_region->start; 2886 num_read_itr = len / TGT_IRAM_READ_PER_ITR; 2887 remaining_len = len % TGT_IRAM_READ_PER_ITR; 2888 for (i = 0; i < num_read_itr; i++) { 2889 ret = ath10k_hif_diag_read(ar, paddr, vaddr, 2890 TGT_IRAM_READ_PER_ITR); 2891 if (ret) { 2892 ath10k_warn(ar, "failed to copy firmware IRAM contents: %d", 2893 ret); 2894 return ret; 2895 } 2896 2897 paddr += TGT_IRAM_READ_PER_ITR; 2898 vaddr += TGT_IRAM_READ_PER_ITR; 2899 } 2900 2901 if (remaining_len) { 2902 ret = ath10k_hif_diag_read(ar, paddr, vaddr, remaining_len); 2903 if (ret) { 2904 ath10k_warn(ar, "failed to copy firmware IRAM contents: %d", 2905 ret); 2906 return ret; 2907 } 2908 } 2909 2910 ath10k_dbg(ar, ATH10K_DBG_BOOT, "target IRAM back up completed\n"); 2911 2912 return 0; 2913 } 2914 2915 int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode, 2916 const struct ath10k_fw_components *fw) 2917 { 2918 int status; 2919 u32 val; 2920 2921 lockdep_assert_held(&ar->conf_mutex); 2922 2923 clear_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags); 2924 2925 ar->running_fw = fw; 2926 2927 if (!test_bit(ATH10K_FW_FEATURE_NON_BMI, 2928 ar->running_fw->fw_file.fw_features)) { 2929 ath10k_bmi_start(ar); 2930 2931 /* Enable hardware clock to speed up firmware download */ 2932 if (ar->hw_params.hw_ops->enable_pll_clk) { 2933 status = ar->hw_params.hw_ops->enable_pll_clk(ar); 2934 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot enable pll ret %d\n", 2935 status); 2936 } 2937 2938 if (ath10k_init_configure_target(ar)) { 2939 status = -EINVAL; 2940 goto err; 2941 } 2942 2943 status = ath10k_download_cal_data(ar); 2944 if (status) 2945 goto err; 2946 2947 /* Some of qca988x solutions are having global reset issue 2948 * during target initialization. Bypassing PLL setting before 2949 * downloading firmware and letting the SoC run on REF_CLK is 2950 * fixing the problem. Corresponding firmware change is also 2951 * needed to set the clock source once the target is 2952 * initialized. 2953 */ 2954 if (test_bit(ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT, 2955 ar->running_fw->fw_file.fw_features)) { 2956 status = ath10k_bmi_write32(ar, hi_skip_clock_init, 1); 2957 if (status) { 2958 ath10k_err(ar, "could not write to skip_clock_init: %d\n", 2959 status); 2960 goto err; 2961 } 2962 } 2963 2964 status = ath10k_download_fw(ar); 2965 if (status) 2966 goto err; 2967 2968 status = ath10k_init_uart(ar); 2969 if (status) 2970 goto err; 2971 2972 if (ar->hif.bus == ATH10K_BUS_SDIO) { 2973 status = ath10k_init_sdio(ar, mode); 2974 if (status) { 2975 ath10k_err(ar, "failed to init SDIO: %d\n", status); 2976 goto err; 2977 } 2978 } 2979 } 2980 2981 ar->htc.htc_ops.target_send_suspend_complete = 2982 ath10k_send_suspend_complete; 2983 2984 status = ath10k_htc_init(ar); 2985 if (status) { 2986 ath10k_err(ar, "could not init HTC (%d)\n", status); 2987 goto err; 2988 } 2989 2990 if (!test_bit(ATH10K_FW_FEATURE_NON_BMI, 2991 ar->running_fw->fw_file.fw_features)) { 2992 status = ath10k_bmi_done(ar); 2993 if (status) 2994 goto err; 2995 } 2996 2997 status = ath10k_wmi_attach(ar); 2998 if (status) { 2999 ath10k_err(ar, "WMI attach failed: %d\n", status); 3000 goto err; 3001 } 3002 3003 status = ath10k_htt_init(ar); 3004 if (status) { 3005 ath10k_err(ar, "failed to init htt: %d\n", status); 3006 goto err_wmi_detach; 3007 } 3008 3009 status = ath10k_htt_tx_start(&ar->htt); 3010 if (status) { 3011 ath10k_err(ar, "failed to alloc htt tx: %d\n", status); 3012 goto err_wmi_detach; 3013 } 3014 3015 /* If firmware indicates Full Rx Reorder support it must be used in a 3016 * slightly different manner. Let HTT code know. 3017 */ 3018 ar->htt.rx_ring.in_ord_rx = !!(test_bit(WMI_SERVICE_RX_FULL_REORDER, 3019 ar->wmi.svc_map)); 3020 3021 status = ath10k_htt_rx_alloc(&ar->htt); 3022 if (status) { 3023 ath10k_err(ar, "failed to alloc htt rx: %d\n", status); 3024 goto err_htt_tx_detach; 3025 } 3026 3027 status = ath10k_hif_start(ar); 3028 if (status) { 3029 ath10k_err(ar, "could not start HIF: %d\n", status); 3030 goto err_htt_rx_detach; 3031 } 3032 3033 status = ath10k_htc_wait_target(&ar->htc); 3034 if (status) { 3035 ath10k_err(ar, "failed to connect to HTC: %d\n", status); 3036 goto err_hif_stop; 3037 } 3038 3039 status = ath10k_hif_start_post(ar); 3040 if (status) { 3041 ath10k_err(ar, "failed to swap mailbox: %d\n", status); 3042 goto err_hif_stop; 3043 } 3044 3045 if (mode == ATH10K_FIRMWARE_MODE_NORMAL) { 3046 status = ath10k_htt_connect(&ar->htt); 3047 if (status) { 3048 ath10k_err(ar, "failed to connect htt (%d)\n", status); 3049 goto err_hif_stop; 3050 } 3051 } 3052 3053 status = ath10k_wmi_connect(ar); 3054 if (status) { 3055 ath10k_err(ar, "could not connect wmi: %d\n", status); 3056 goto err_hif_stop; 3057 } 3058 3059 status = ath10k_htc_start(&ar->htc); 3060 if (status) { 3061 ath10k_err(ar, "failed to start htc: %d\n", status); 3062 goto err_hif_stop; 3063 } 3064 3065 if (mode == ATH10K_FIRMWARE_MODE_NORMAL) { 3066 status = ath10k_wmi_wait_for_service_ready(ar); 3067 if (status) { 3068 ath10k_warn(ar, "wmi service ready event not received"); 3069 goto err_hif_stop; 3070 } 3071 } 3072 3073 ath10k_dbg(ar, ATH10K_DBG_BOOT, "firmware %s booted\n", 3074 ar->hw->wiphy->fw_version); 3075 3076 if (test_bit(ATH10K_FW_FEATURE_IRAM_RECOVERY, 3077 ar->running_fw->fw_file.fw_features)) { 3078 status = ath10k_core_copy_target_iram(ar); 3079 if (status) { 3080 ath10k_warn(ar, "failed to copy target iram contents: %d", 3081 status); 3082 goto err_hif_stop; 3083 } 3084 } 3085 3086 if (test_bit(WMI_SERVICE_EXT_RES_CFG_SUPPORT, ar->wmi.svc_map) && 3087 mode == ATH10K_FIRMWARE_MODE_NORMAL) { 3088 val = 0; 3089 if (ath10k_peer_stats_enabled(ar)) 3090 val = WMI_10_4_PEER_STATS; 3091 3092 /* Enable vdev stats by default */ 3093 val |= WMI_10_4_VDEV_STATS; 3094 3095 if (test_bit(WMI_SERVICE_BSS_CHANNEL_INFO_64, ar->wmi.svc_map)) 3096 val |= WMI_10_4_BSS_CHANNEL_INFO_64; 3097 3098 ath10k_core_fetch_btcoex_dt(ar); 3099 3100 /* 10.4 firmware supports BT-Coex without reloading firmware 3101 * via pdev param. To support Bluetooth coexistence pdev param, 3102 * WMI_COEX_GPIO_SUPPORT of extended resource config should be 3103 * enabled always. 3104 * 3105 * We can still enable BTCOEX if firmware has the support 3106 * even though btceox_support value is 3107 * ATH10K_DT_BTCOEX_NOT_FOUND 3108 */ 3109 3110 if (test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map) && 3111 test_bit(ATH10K_FW_FEATURE_BTCOEX_PARAM, 3112 ar->running_fw->fw_file.fw_features) && 3113 ar->coex_support) 3114 val |= WMI_10_4_COEX_GPIO_SUPPORT; 3115 3116 if (test_bit(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, 3117 ar->wmi.svc_map)) 3118 val |= WMI_10_4_TDLS_EXPLICIT_MODE_ONLY; 3119 3120 if (test_bit(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, 3121 ar->wmi.svc_map)) 3122 val |= WMI_10_4_TDLS_UAPSD_BUFFER_STA; 3123 3124 if (test_bit(WMI_SERVICE_TX_DATA_ACK_RSSI, 3125 ar->wmi.svc_map)) 3126 val |= WMI_10_4_TX_DATA_ACK_RSSI; 3127 3128 if (test_bit(WMI_SERVICE_REPORT_AIRTIME, ar->wmi.svc_map)) 3129 val |= WMI_10_4_REPORT_AIRTIME; 3130 3131 if (test_bit(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT, 3132 ar->wmi.svc_map)) 3133 val |= WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT; 3134 3135 status = ath10k_mac_ext_resource_config(ar, val); 3136 if (status) { 3137 ath10k_err(ar, 3138 "failed to send ext resource cfg command : %d\n", 3139 status); 3140 goto err_hif_stop; 3141 } 3142 } 3143 3144 status = ath10k_wmi_cmd_init(ar); 3145 if (status) { 3146 ath10k_err(ar, "could not send WMI init command (%d)\n", 3147 status); 3148 goto err_hif_stop; 3149 } 3150 3151 status = ath10k_wmi_wait_for_unified_ready(ar); 3152 if (status) { 3153 ath10k_err(ar, "wmi unified ready event not received\n"); 3154 goto err_hif_stop; 3155 } 3156 3157 status = ath10k_core_compat_services(ar); 3158 if (status) { 3159 ath10k_err(ar, "compat services failed: %d\n", status); 3160 goto err_hif_stop; 3161 } 3162 3163 status = ath10k_wmi_pdev_set_base_macaddr(ar, ar->mac_addr); 3164 if (status && status != -EOPNOTSUPP) { 3165 ath10k_err(ar, 3166 "failed to set base mac address: %d\n", status); 3167 goto err_hif_stop; 3168 } 3169 3170 /* Some firmware revisions do not properly set up hardware rx filter 3171 * registers. 3172 * 3173 * A known example from QCA9880 and 10.2.4 is that MAC_PCU_ADDR1_MASK 3174 * is filled with 0s instead of 1s allowing HW to respond with ACKs to 3175 * any frames that matches MAC_PCU_RX_FILTER which is also 3176 * misconfigured to accept anything. 3177 * 3178 * The ADDR1 is programmed using internal firmware structure field and 3179 * can't be (easily/sanely) reached from the driver explicitly. It is 3180 * possible to implicitly make it correct by creating a dummy vdev and 3181 * then deleting it. 3182 */ 3183 if (ar->hw_params.hw_filter_reset_required && 3184 mode == ATH10K_FIRMWARE_MODE_NORMAL) { 3185 status = ath10k_core_reset_rx_filter(ar); 3186 if (status) { 3187 ath10k_err(ar, 3188 "failed to reset rx filter: %d\n", status); 3189 goto err_hif_stop; 3190 } 3191 } 3192 3193 status = ath10k_htt_rx_ring_refill(ar); 3194 if (status) { 3195 ath10k_err(ar, "failed to refill htt rx ring: %d\n", status); 3196 goto err_hif_stop; 3197 } 3198 3199 if (ar->max_num_vdevs >= 64) 3200 ar->free_vdev_map = 0xFFFFFFFFFFFFFFFFLL; 3201 else 3202 ar->free_vdev_map = (1LL << ar->max_num_vdevs) - 1; 3203 3204 INIT_LIST_HEAD(&ar->arvifs); 3205 3206 /* we don't care about HTT in UTF mode */ 3207 if (mode == ATH10K_FIRMWARE_MODE_NORMAL) { 3208 status = ath10k_htt_setup(&ar->htt); 3209 if (status) { 3210 ath10k_err(ar, "failed to setup htt: %d\n", status); 3211 goto err_hif_stop; 3212 } 3213 } 3214 3215 status = ath10k_debug_start(ar); 3216 if (status) 3217 goto err_hif_stop; 3218 3219 status = ath10k_hif_set_target_log_mode(ar, fw_diag_log); 3220 if (status && status != -EOPNOTSUPP) { 3221 ath10k_warn(ar, "set target log mode failed: %d\n", status); 3222 goto err_hif_stop; 3223 } 3224 3225 return 0; 3226 3227 err_hif_stop: 3228 ath10k_hif_stop(ar); 3229 err_htt_rx_detach: 3230 ath10k_htt_rx_free(&ar->htt); 3231 err_htt_tx_detach: 3232 ath10k_htt_tx_free(&ar->htt); 3233 err_wmi_detach: 3234 ath10k_wmi_detach(ar); 3235 err: 3236 return status; 3237 } 3238 EXPORT_SYMBOL(ath10k_core_start); 3239 3240 int ath10k_wait_for_suspend(struct ath10k *ar, u32 suspend_opt) 3241 { 3242 int ret; 3243 unsigned long time_left; 3244 3245 reinit_completion(&ar->target_suspend); 3246 3247 ret = ath10k_wmi_pdev_suspend_target(ar, suspend_opt); 3248 if (ret) { 3249 ath10k_warn(ar, "could not suspend target (%d)\n", ret); 3250 return ret; 3251 } 3252 3253 time_left = wait_for_completion_timeout(&ar->target_suspend, 1 * HZ); 3254 3255 if (!time_left) { 3256 ath10k_warn(ar, "suspend timed out - target pause event never came\n"); 3257 return -ETIMEDOUT; 3258 } 3259 3260 return 0; 3261 } 3262 3263 void ath10k_core_stop(struct ath10k *ar) 3264 { 3265 lockdep_assert_held(&ar->conf_mutex); 3266 ath10k_debug_stop(ar); 3267 3268 /* try to suspend target */ 3269 if (ar->state != ATH10K_STATE_RESTARTING && 3270 ar->state != ATH10K_STATE_UTF) 3271 ath10k_wait_for_suspend(ar, WMI_PDEV_SUSPEND_AND_DISABLE_INTR); 3272 3273 ath10k_hif_stop(ar); 3274 ath10k_htt_tx_stop(&ar->htt); 3275 ath10k_htt_rx_free(&ar->htt); 3276 ath10k_wmi_detach(ar); 3277 3278 ar->id.bmi_ids_valid = false; 3279 } 3280 EXPORT_SYMBOL(ath10k_core_stop); 3281 3282 /* mac80211 manages fw/hw initialization through start/stop hooks. However in 3283 * order to know what hw capabilities should be advertised to mac80211 it is 3284 * necessary to load the firmware (and tear it down immediately since start 3285 * hook will try to init it again) before registering 3286 */ 3287 static int ath10k_core_probe_fw(struct ath10k *ar) 3288 { 3289 struct bmi_target_info target_info; 3290 int ret = 0; 3291 3292 ret = ath10k_hif_power_up(ar, ATH10K_FIRMWARE_MODE_NORMAL); 3293 if (ret) { 3294 ath10k_err(ar, "could not power on hif bus (%d)\n", ret); 3295 return ret; 3296 } 3297 3298 switch (ar->hif.bus) { 3299 case ATH10K_BUS_SDIO: 3300 memset(&target_info, 0, sizeof(target_info)); 3301 ret = ath10k_bmi_get_target_info_sdio(ar, &target_info); 3302 if (ret) { 3303 ath10k_err(ar, "could not get target info (%d)\n", ret); 3304 goto err_power_down; 3305 } 3306 ar->target_version = target_info.version; 3307 ar->hw->wiphy->hw_version = target_info.version; 3308 break; 3309 case ATH10K_BUS_PCI: 3310 case ATH10K_BUS_AHB: 3311 case ATH10K_BUS_USB: 3312 memset(&target_info, 0, sizeof(target_info)); 3313 ret = ath10k_bmi_get_target_info(ar, &target_info); 3314 if (ret) { 3315 ath10k_err(ar, "could not get target info (%d)\n", ret); 3316 goto err_power_down; 3317 } 3318 ar->target_version = target_info.version; 3319 ar->hw->wiphy->hw_version = target_info.version; 3320 break; 3321 case ATH10K_BUS_SNOC: 3322 memset(&target_info, 0, sizeof(target_info)); 3323 ret = ath10k_hif_get_target_info(ar, &target_info); 3324 if (ret) { 3325 ath10k_err(ar, "could not get target info (%d)\n", ret); 3326 goto err_power_down; 3327 } 3328 ar->target_version = target_info.version; 3329 ar->hw->wiphy->hw_version = target_info.version; 3330 break; 3331 default: 3332 ath10k_err(ar, "incorrect hif bus type: %d\n", ar->hif.bus); 3333 } 3334 3335 ret = ath10k_init_hw_params(ar); 3336 if (ret) { 3337 ath10k_err(ar, "could not get hw params (%d)\n", ret); 3338 goto err_power_down; 3339 } 3340 3341 ret = ath10k_core_fetch_firmware_files(ar); 3342 if (ret) { 3343 ath10k_err(ar, "could not fetch firmware files (%d)\n", ret); 3344 goto err_power_down; 3345 } 3346 3347 BUILD_BUG_ON(sizeof(ar->hw->wiphy->fw_version) != 3348 sizeof(ar->normal_mode_fw.fw_file.fw_version)); 3349 memcpy(ar->hw->wiphy->fw_version, ar->normal_mode_fw.fw_file.fw_version, 3350 sizeof(ar->hw->wiphy->fw_version)); 3351 3352 ath10k_debug_print_hwfw_info(ar); 3353 3354 if (!test_bit(ATH10K_FW_FEATURE_NON_BMI, 3355 ar->normal_mode_fw.fw_file.fw_features)) { 3356 ret = ath10k_core_pre_cal_download(ar); 3357 if (ret) { 3358 /* pre calibration data download is not necessary 3359 * for all the chipsets. Ignore failures and continue. 3360 */ 3361 ath10k_dbg(ar, ATH10K_DBG_BOOT, 3362 "could not load pre cal data: %d\n", ret); 3363 } 3364 3365 ret = ath10k_core_get_board_id_from_otp(ar); 3366 if (ret && ret != -EOPNOTSUPP) { 3367 ath10k_err(ar, "failed to get board id from otp: %d\n", 3368 ret); 3369 goto err_free_firmware_files; 3370 } 3371 3372 ret = ath10k_core_check_smbios(ar); 3373 if (ret) 3374 ath10k_dbg(ar, ATH10K_DBG_BOOT, "SMBIOS bdf variant name not set.\n"); 3375 3376 ret = ath10k_core_check_dt(ar); 3377 if (ret) 3378 ath10k_dbg(ar, ATH10K_DBG_BOOT, "DT bdf variant name not set.\n"); 3379 3380 ret = ath10k_core_fetch_board_file(ar, ATH10K_BD_IE_BOARD); 3381 if (ret) { 3382 ath10k_err(ar, "failed to fetch board file: %d\n", ret); 3383 goto err_free_firmware_files; 3384 } 3385 3386 ath10k_debug_print_board_info(ar); 3387 } 3388 3389 device_get_mac_address(ar->dev, ar->mac_addr); 3390 3391 ret = ath10k_core_init_firmware_features(ar); 3392 if (ret) { 3393 ath10k_err(ar, "fatal problem with firmware features: %d\n", 3394 ret); 3395 goto err_free_firmware_files; 3396 } 3397 3398 if (!test_bit(ATH10K_FW_FEATURE_NON_BMI, 3399 ar->normal_mode_fw.fw_file.fw_features)) { 3400 ret = ath10k_swap_code_seg_init(ar, 3401 &ar->normal_mode_fw.fw_file); 3402 if (ret) { 3403 ath10k_err(ar, "failed to initialize code swap segment: %d\n", 3404 ret); 3405 goto err_free_firmware_files; 3406 } 3407 } 3408 3409 mutex_lock(&ar->conf_mutex); 3410 3411 ret = ath10k_core_start(ar, ATH10K_FIRMWARE_MODE_NORMAL, 3412 &ar->normal_mode_fw); 3413 if (ret) { 3414 ath10k_err(ar, "could not init core (%d)\n", ret); 3415 goto err_unlock; 3416 } 3417 3418 ath10k_debug_print_boot_info(ar); 3419 ath10k_core_stop(ar); 3420 3421 mutex_unlock(&ar->conf_mutex); 3422 3423 ath10k_hif_power_down(ar); 3424 return 0; 3425 3426 err_unlock: 3427 mutex_unlock(&ar->conf_mutex); 3428 3429 err_free_firmware_files: 3430 ath10k_core_free_firmware_files(ar); 3431 3432 err_power_down: 3433 ath10k_hif_power_down(ar); 3434 3435 return ret; 3436 } 3437 3438 static void ath10k_core_register_work(struct work_struct *work) 3439 { 3440 struct ath10k *ar = container_of(work, struct ath10k, register_work); 3441 int status; 3442 3443 /* peer stats are enabled by default */ 3444 set_bit(ATH10K_FLAG_PEER_STATS, &ar->dev_flags); 3445 3446 status = ath10k_core_probe_fw(ar); 3447 if (status) { 3448 ath10k_err(ar, "could not probe fw (%d)\n", status); 3449 goto err; 3450 } 3451 3452 status = ath10k_mac_register(ar); 3453 if (status) { 3454 ath10k_err(ar, "could not register to mac80211 (%d)\n", status); 3455 goto err_release_fw; 3456 } 3457 3458 status = ath10k_coredump_register(ar); 3459 if (status) { 3460 ath10k_err(ar, "unable to register coredump\n"); 3461 goto err_unregister_mac; 3462 } 3463 3464 status = ath10k_debug_register(ar); 3465 if (status) { 3466 ath10k_err(ar, "unable to initialize debugfs\n"); 3467 goto err_unregister_coredump; 3468 } 3469 3470 status = ath10k_spectral_create(ar); 3471 if (status) { 3472 ath10k_err(ar, "failed to initialize spectral\n"); 3473 goto err_debug_destroy; 3474 } 3475 3476 status = ath10k_thermal_register(ar); 3477 if (status) { 3478 ath10k_err(ar, "could not register thermal device: %d\n", 3479 status); 3480 goto err_spectral_destroy; 3481 } 3482 3483 set_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags); 3484 return; 3485 3486 err_spectral_destroy: 3487 ath10k_spectral_destroy(ar); 3488 err_debug_destroy: 3489 ath10k_debug_destroy(ar); 3490 err_unregister_coredump: 3491 ath10k_coredump_unregister(ar); 3492 err_unregister_mac: 3493 ath10k_mac_unregister(ar); 3494 err_release_fw: 3495 ath10k_core_free_firmware_files(ar); 3496 err: 3497 /* TODO: It's probably a good idea to release device from the driver 3498 * but calling device_release_driver() here will cause a deadlock. 3499 */ 3500 return; 3501 } 3502 3503 int ath10k_core_register(struct ath10k *ar, 3504 const struct ath10k_bus_params *bus_params) 3505 { 3506 ar->bus_param = *bus_params; 3507 3508 queue_work(ar->workqueue, &ar->register_work); 3509 3510 return 0; 3511 } 3512 EXPORT_SYMBOL(ath10k_core_register); 3513 3514 void ath10k_core_unregister(struct ath10k *ar) 3515 { 3516 cancel_work_sync(&ar->register_work); 3517 3518 if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags)) 3519 return; 3520 3521 ath10k_thermal_unregister(ar); 3522 /* Stop spectral before unregistering from mac80211 to remove the 3523 * relayfs debugfs file cleanly. Otherwise the parent debugfs tree 3524 * would be already be free'd recursively, leading to a double free. 3525 */ 3526 ath10k_spectral_destroy(ar); 3527 3528 /* We must unregister from mac80211 before we stop HTC and HIF. 3529 * Otherwise we will fail to submit commands to FW and mac80211 will be 3530 * unhappy about callback failures. 3531 */ 3532 ath10k_mac_unregister(ar); 3533 3534 ath10k_testmode_destroy(ar); 3535 3536 ath10k_core_free_firmware_files(ar); 3537 ath10k_core_free_board_files(ar); 3538 3539 ath10k_debug_unregister(ar); 3540 } 3541 EXPORT_SYMBOL(ath10k_core_unregister); 3542 3543 struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev, 3544 enum ath10k_bus bus, 3545 enum ath10k_hw_rev hw_rev, 3546 const struct ath10k_hif_ops *hif_ops) 3547 { 3548 struct ath10k *ar; 3549 int ret; 3550 3551 ar = ath10k_mac_create(priv_size); 3552 if (!ar) 3553 return NULL; 3554 3555 ar->ath_common.priv = ar; 3556 ar->ath_common.hw = ar->hw; 3557 ar->dev = dev; 3558 ar->hw_rev = hw_rev; 3559 ar->hif.ops = hif_ops; 3560 ar->hif.bus = bus; 3561 3562 switch (hw_rev) { 3563 case ATH10K_HW_QCA988X: 3564 case ATH10K_HW_QCA9887: 3565 ar->regs = &qca988x_regs; 3566 ar->hw_ce_regs = &qcax_ce_regs; 3567 ar->hw_values = &qca988x_values; 3568 break; 3569 case ATH10K_HW_QCA6174: 3570 case ATH10K_HW_QCA9377: 3571 ar->regs = &qca6174_regs; 3572 ar->hw_ce_regs = &qcax_ce_regs; 3573 ar->hw_values = &qca6174_values; 3574 break; 3575 case ATH10K_HW_QCA99X0: 3576 case ATH10K_HW_QCA9984: 3577 ar->regs = &qca99x0_regs; 3578 ar->hw_ce_regs = &qcax_ce_regs; 3579 ar->hw_values = &qca99x0_values; 3580 break; 3581 case ATH10K_HW_QCA9888: 3582 ar->regs = &qca99x0_regs; 3583 ar->hw_ce_regs = &qcax_ce_regs; 3584 ar->hw_values = &qca9888_values; 3585 break; 3586 case ATH10K_HW_QCA4019: 3587 ar->regs = &qca4019_regs; 3588 ar->hw_ce_regs = &qcax_ce_regs; 3589 ar->hw_values = &qca4019_values; 3590 break; 3591 case ATH10K_HW_WCN3990: 3592 ar->regs = &wcn3990_regs; 3593 ar->hw_ce_regs = &wcn3990_ce_regs; 3594 ar->hw_values = &wcn3990_values; 3595 break; 3596 default: 3597 ath10k_err(ar, "unsupported core hardware revision %d\n", 3598 hw_rev); 3599 ret = -ENOTSUPP; 3600 goto err_free_mac; 3601 } 3602 3603 init_completion(&ar->scan.started); 3604 init_completion(&ar->scan.completed); 3605 init_completion(&ar->scan.on_channel); 3606 init_completion(&ar->target_suspend); 3607 init_completion(&ar->driver_recovery); 3608 init_completion(&ar->wow.wakeup_completed); 3609 3610 init_completion(&ar->install_key_done); 3611 init_completion(&ar->vdev_setup_done); 3612 init_completion(&ar->vdev_delete_done); 3613 init_completion(&ar->thermal.wmi_sync); 3614 init_completion(&ar->bss_survey_done); 3615 init_completion(&ar->peer_delete_done); 3616 init_completion(&ar->peer_stats_info_complete); 3617 3618 INIT_DELAYED_WORK(&ar->scan.timeout, ath10k_scan_timeout_work); 3619 3620 ar->workqueue = create_singlethread_workqueue("ath10k_wq"); 3621 if (!ar->workqueue) 3622 goto err_free_mac; 3623 3624 ar->workqueue_aux = create_singlethread_workqueue("ath10k_aux_wq"); 3625 if (!ar->workqueue_aux) 3626 goto err_free_wq; 3627 3628 ar->workqueue_tx_complete = 3629 create_singlethread_workqueue("ath10k_tx_complete_wq"); 3630 if (!ar->workqueue_tx_complete) 3631 goto err_free_aux_wq; 3632 3633 mutex_init(&ar->conf_mutex); 3634 mutex_init(&ar->dump_mutex); 3635 spin_lock_init(&ar->data_lock); 3636 3637 for (int ac = 0; ac < IEEE80211_NUM_ACS; ac++) 3638 spin_lock_init(&ar->queue_lock[ac]); 3639 3640 INIT_LIST_HEAD(&ar->peers); 3641 init_waitqueue_head(&ar->peer_mapping_wq); 3642 init_waitqueue_head(&ar->htt.empty_tx_wq); 3643 init_waitqueue_head(&ar->wmi.tx_credits_wq); 3644 3645 skb_queue_head_init(&ar->htt.rx_indication_head); 3646 3647 init_completion(&ar->offchan_tx_completed); 3648 INIT_WORK(&ar->offchan_tx_work, ath10k_offchan_tx_work); 3649 skb_queue_head_init(&ar->offchan_tx_queue); 3650 3651 INIT_WORK(&ar->wmi_mgmt_tx_work, ath10k_mgmt_over_wmi_tx_work); 3652 skb_queue_head_init(&ar->wmi_mgmt_tx_queue); 3653 3654 INIT_WORK(&ar->register_work, ath10k_core_register_work); 3655 INIT_WORK(&ar->restart_work, ath10k_core_restart); 3656 INIT_WORK(&ar->set_coverage_class_work, 3657 ath10k_core_set_coverage_class_work); 3658 3659 init_dummy_netdev(&ar->napi_dev); 3660 3661 ret = ath10k_coredump_create(ar); 3662 if (ret) 3663 goto err_free_tx_complete; 3664 3665 ret = ath10k_debug_create(ar); 3666 if (ret) 3667 goto err_free_coredump; 3668 3669 return ar; 3670 3671 err_free_coredump: 3672 ath10k_coredump_destroy(ar); 3673 err_free_tx_complete: 3674 destroy_workqueue(ar->workqueue_tx_complete); 3675 err_free_aux_wq: 3676 destroy_workqueue(ar->workqueue_aux); 3677 err_free_wq: 3678 destroy_workqueue(ar->workqueue); 3679 err_free_mac: 3680 ath10k_mac_destroy(ar); 3681 3682 return NULL; 3683 } 3684 EXPORT_SYMBOL(ath10k_core_create); 3685 3686 void ath10k_core_destroy(struct ath10k *ar) 3687 { 3688 destroy_workqueue(ar->workqueue); 3689 3690 destroy_workqueue(ar->workqueue_aux); 3691 3692 destroy_workqueue(ar->workqueue_tx_complete); 3693 3694 ath10k_debug_destroy(ar); 3695 ath10k_coredump_destroy(ar); 3696 ath10k_htt_tx_destroy(&ar->htt); 3697 ath10k_wmi_free_host_mem(ar); 3698 ath10k_mac_destroy(ar); 3699 } 3700 EXPORT_SYMBOL(ath10k_core_destroy); 3701 3702 MODULE_AUTHOR("Qualcomm Atheros"); 3703 MODULE_DESCRIPTION("Core module for Qualcomm Atheros 802.11ac wireless LAN cards."); 3704 MODULE_LICENSE("Dual BSD/GPL"); 3705