1 /* 2 * Copyright (c) 2005-2011 Atheros Communications Inc. 3 * Copyright (c) 2011-2013 Qualcomm Atheros, Inc. 4 * 5 * Permission to use, copy, modify, and/or distribute this software for any 6 * purpose with or without fee is hereby granted, provided that the above 7 * copyright notice and this permission notice appear in all copies. 8 * 9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 16 */ 17 18 #include <linux/module.h> 19 #include <linux/firmware.h> 20 21 #include "core.h" 22 #include "mac.h" 23 #include "htc.h" 24 #include "hif.h" 25 #include "wmi.h" 26 #include "bmi.h" 27 #include "debug.h" 28 #include "htt.h" 29 #include "testmode.h" 30 31 unsigned int ath10k_debug_mask; 32 static bool uart_print; 33 static unsigned int ath10k_p2p; 34 module_param_named(debug_mask, ath10k_debug_mask, uint, 0644); 35 module_param(uart_print, bool, 0644); 36 module_param_named(p2p, ath10k_p2p, uint, 0644); 37 MODULE_PARM_DESC(debug_mask, "Debugging mask"); 38 MODULE_PARM_DESC(uart_print, "Uart target debugging"); 39 MODULE_PARM_DESC(p2p, "Enable ath10k P2P support"); 40 41 static const struct ath10k_hw_params ath10k_hw_params_list[] = { 42 { 43 .id = QCA988X_HW_2_0_VERSION, 44 .name = "qca988x hw2.0", 45 .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR, 46 .fw = { 47 .dir = QCA988X_HW_2_0_FW_DIR, 48 .fw = QCA988X_HW_2_0_FW_FILE, 49 .otp = QCA988X_HW_2_0_OTP_FILE, 50 .board = QCA988X_HW_2_0_BOARD_DATA_FILE, 51 }, 52 }, 53 }; 54 55 static void ath10k_send_suspend_complete(struct ath10k *ar) 56 { 57 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot suspend complete\n"); 58 59 complete(&ar->target_suspend); 60 } 61 62 static int ath10k_init_configure_target(struct ath10k *ar) 63 { 64 u32 param_host; 65 int ret; 66 67 /* tell target which HTC version it is used*/ 68 ret = ath10k_bmi_write32(ar, hi_app_host_interest, 69 HTC_PROTOCOL_VERSION); 70 if (ret) { 71 ath10k_err(ar, "settings HTC version failed\n"); 72 return ret; 73 } 74 75 /* set the firmware mode to STA/IBSS/AP */ 76 ret = ath10k_bmi_read32(ar, hi_option_flag, ¶m_host); 77 if (ret) { 78 ath10k_err(ar, "setting firmware mode (1/2) failed\n"); 79 return ret; 80 } 81 82 /* TODO following parameters need to be re-visited. */ 83 /* num_device */ 84 param_host |= (1 << HI_OPTION_NUM_DEV_SHIFT); 85 /* Firmware mode */ 86 /* FIXME: Why FW_MODE_AP ??.*/ 87 param_host |= (HI_OPTION_FW_MODE_AP << HI_OPTION_FW_MODE_SHIFT); 88 /* mac_addr_method */ 89 param_host |= (1 << HI_OPTION_MAC_ADDR_METHOD_SHIFT); 90 /* firmware_bridge */ 91 param_host |= (0 << HI_OPTION_FW_BRIDGE_SHIFT); 92 /* fwsubmode */ 93 param_host |= (0 << HI_OPTION_FW_SUBMODE_SHIFT); 94 95 ret = ath10k_bmi_write32(ar, hi_option_flag, param_host); 96 if (ret) { 97 ath10k_err(ar, "setting firmware mode (2/2) failed\n"); 98 return ret; 99 } 100 101 /* We do all byte-swapping on the host */ 102 ret = ath10k_bmi_write32(ar, hi_be, 0); 103 if (ret) { 104 ath10k_err(ar, "setting host CPU BE mode failed\n"); 105 return ret; 106 } 107 108 /* FW descriptor/Data swap flags */ 109 ret = ath10k_bmi_write32(ar, hi_fw_swap, 0); 110 111 if (ret) { 112 ath10k_err(ar, "setting FW data/desc swap flags failed\n"); 113 return ret; 114 } 115 116 return 0; 117 } 118 119 static const struct firmware *ath10k_fetch_fw_file(struct ath10k *ar, 120 const char *dir, 121 const char *file) 122 { 123 char filename[100]; 124 const struct firmware *fw; 125 int ret; 126 127 if (file == NULL) 128 return ERR_PTR(-ENOENT); 129 130 if (dir == NULL) 131 dir = "."; 132 133 snprintf(filename, sizeof(filename), "%s/%s", dir, file); 134 ret = request_firmware(&fw, filename, ar->dev); 135 if (ret) 136 return ERR_PTR(ret); 137 138 return fw; 139 } 140 141 static int ath10k_push_board_ext_data(struct ath10k *ar) 142 { 143 u32 board_data_size = QCA988X_BOARD_DATA_SZ; 144 u32 board_ext_data_size = QCA988X_BOARD_EXT_DATA_SZ; 145 u32 board_ext_data_addr; 146 int ret; 147 148 ret = ath10k_bmi_read32(ar, hi_board_ext_data, &board_ext_data_addr); 149 if (ret) { 150 ath10k_err(ar, "could not read board ext data addr (%d)\n", 151 ret); 152 return ret; 153 } 154 155 ath10k_dbg(ar, ATH10K_DBG_BOOT, 156 "boot push board extended data addr 0x%x\n", 157 board_ext_data_addr); 158 159 if (board_ext_data_addr == 0) 160 return 0; 161 162 if (ar->board_len != (board_data_size + board_ext_data_size)) { 163 ath10k_err(ar, "invalid board (ext) data sizes %zu != %d+%d\n", 164 ar->board_len, board_data_size, board_ext_data_size); 165 return -EINVAL; 166 } 167 168 ret = ath10k_bmi_write_memory(ar, board_ext_data_addr, 169 ar->board_data + board_data_size, 170 board_ext_data_size); 171 if (ret) { 172 ath10k_err(ar, "could not write board ext data (%d)\n", ret); 173 return ret; 174 } 175 176 ret = ath10k_bmi_write32(ar, hi_board_ext_data_config, 177 (board_ext_data_size << 16) | 1); 178 if (ret) { 179 ath10k_err(ar, "could not write board ext data bit (%d)\n", 180 ret); 181 return ret; 182 } 183 184 return 0; 185 } 186 187 static int ath10k_download_board_data(struct ath10k *ar) 188 { 189 u32 board_data_size = QCA988X_BOARD_DATA_SZ; 190 u32 address; 191 int ret; 192 193 ret = ath10k_push_board_ext_data(ar); 194 if (ret) { 195 ath10k_err(ar, "could not push board ext data (%d)\n", ret); 196 goto exit; 197 } 198 199 ret = ath10k_bmi_read32(ar, hi_board_data, &address); 200 if (ret) { 201 ath10k_err(ar, "could not read board data addr (%d)\n", ret); 202 goto exit; 203 } 204 205 ret = ath10k_bmi_write_memory(ar, address, ar->board_data, 206 min_t(u32, board_data_size, 207 ar->board_len)); 208 if (ret) { 209 ath10k_err(ar, "could not write board data (%d)\n", ret); 210 goto exit; 211 } 212 213 ret = ath10k_bmi_write32(ar, hi_board_data_initialized, 1); 214 if (ret) { 215 ath10k_err(ar, "could not write board data bit (%d)\n", ret); 216 goto exit; 217 } 218 219 exit: 220 return ret; 221 } 222 223 static int ath10k_download_and_run_otp(struct ath10k *ar) 224 { 225 u32 result, address = ar->hw_params.patch_load_addr; 226 int ret; 227 228 /* OTP is optional */ 229 230 if (!ar->otp_data || !ar->otp_len) { 231 ath10k_warn(ar, "Not running otp, calibration will be incorrect (otp-data %p otp_len %zd)!\n", 232 ar->otp_data, ar->otp_len); 233 return 0; 234 } 235 236 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot upload otp to 0x%x len %zd\n", 237 address, ar->otp_len); 238 239 ret = ath10k_bmi_fast_download(ar, address, ar->otp_data, ar->otp_len); 240 if (ret) { 241 ath10k_err(ar, "could not write otp (%d)\n", ret); 242 return ret; 243 } 244 245 ret = ath10k_bmi_execute(ar, address, 0, &result); 246 if (ret) { 247 ath10k_err(ar, "could not execute otp (%d)\n", ret); 248 return ret; 249 } 250 251 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot otp execute result %d\n", result); 252 253 if (result != 0) { 254 ath10k_err(ar, "otp calibration failed: %d", result); 255 return -EINVAL; 256 } 257 258 return 0; 259 } 260 261 static int ath10k_download_fw(struct ath10k *ar, enum ath10k_firmware_mode mode) 262 { 263 u32 address, data_len; 264 const char *mode_name; 265 const void *data; 266 int ret; 267 268 address = ar->hw_params.patch_load_addr; 269 270 switch (mode) { 271 case ATH10K_FIRMWARE_MODE_NORMAL: 272 data = ar->firmware_data; 273 data_len = ar->firmware_len; 274 mode_name = "normal"; 275 break; 276 case ATH10K_FIRMWARE_MODE_UTF: 277 data = ar->testmode.utf->data; 278 data_len = ar->testmode.utf->size; 279 mode_name = "utf"; 280 break; 281 default: 282 ath10k_err(ar, "unknown firmware mode: %d\n", mode); 283 return -EINVAL; 284 } 285 286 ath10k_dbg(ar, ATH10K_DBG_BOOT, 287 "boot uploading firmware image %p len %d mode %s\n", 288 data, data_len, mode_name); 289 290 ret = ath10k_bmi_fast_download(ar, address, data, data_len); 291 if (ret) { 292 ath10k_err(ar, "failed to download %s firmware: %d\n", 293 mode_name, ret); 294 return ret; 295 } 296 297 return ret; 298 } 299 300 static void ath10k_core_free_firmware_files(struct ath10k *ar) 301 { 302 if (ar->board && !IS_ERR(ar->board)) 303 release_firmware(ar->board); 304 305 if (ar->otp && !IS_ERR(ar->otp)) 306 release_firmware(ar->otp); 307 308 if (ar->firmware && !IS_ERR(ar->firmware)) 309 release_firmware(ar->firmware); 310 311 ar->board = NULL; 312 ar->board_data = NULL; 313 ar->board_len = 0; 314 315 ar->otp = NULL; 316 ar->otp_data = NULL; 317 ar->otp_len = 0; 318 319 ar->firmware = NULL; 320 ar->firmware_data = NULL; 321 ar->firmware_len = 0; 322 } 323 324 static int ath10k_core_fetch_firmware_api_1(struct ath10k *ar) 325 { 326 int ret = 0; 327 328 if (ar->hw_params.fw.fw == NULL) { 329 ath10k_err(ar, "firmware file not defined\n"); 330 return -EINVAL; 331 } 332 333 if (ar->hw_params.fw.board == NULL) { 334 ath10k_err(ar, "board data file not defined"); 335 return -EINVAL; 336 } 337 338 ar->board = ath10k_fetch_fw_file(ar, 339 ar->hw_params.fw.dir, 340 ar->hw_params.fw.board); 341 if (IS_ERR(ar->board)) { 342 ret = PTR_ERR(ar->board); 343 ath10k_err(ar, "could not fetch board data (%d)\n", ret); 344 goto err; 345 } 346 347 ar->board_data = ar->board->data; 348 ar->board_len = ar->board->size; 349 350 ar->firmware = ath10k_fetch_fw_file(ar, 351 ar->hw_params.fw.dir, 352 ar->hw_params.fw.fw); 353 if (IS_ERR(ar->firmware)) { 354 ret = PTR_ERR(ar->firmware); 355 ath10k_err(ar, "could not fetch firmware (%d)\n", ret); 356 goto err; 357 } 358 359 ar->firmware_data = ar->firmware->data; 360 ar->firmware_len = ar->firmware->size; 361 362 /* OTP may be undefined. If so, don't fetch it at all */ 363 if (ar->hw_params.fw.otp == NULL) 364 return 0; 365 366 ar->otp = ath10k_fetch_fw_file(ar, 367 ar->hw_params.fw.dir, 368 ar->hw_params.fw.otp); 369 if (IS_ERR(ar->otp)) { 370 ret = PTR_ERR(ar->otp); 371 ath10k_err(ar, "could not fetch otp (%d)\n", ret); 372 goto err; 373 } 374 375 ar->otp_data = ar->otp->data; 376 ar->otp_len = ar->otp->size; 377 378 return 0; 379 380 err: 381 ath10k_core_free_firmware_files(ar); 382 return ret; 383 } 384 385 static int ath10k_core_fetch_firmware_api_n(struct ath10k *ar, const char *name) 386 { 387 size_t magic_len, len, ie_len; 388 int ie_id, i, index, bit, ret; 389 struct ath10k_fw_ie *hdr; 390 const u8 *data; 391 __le32 *timestamp; 392 393 /* first fetch the firmware file (firmware-*.bin) */ 394 ar->firmware = ath10k_fetch_fw_file(ar, ar->hw_params.fw.dir, name); 395 if (IS_ERR(ar->firmware)) { 396 ath10k_err(ar, "could not fetch firmware file '%s/%s': %ld\n", 397 ar->hw_params.fw.dir, name, PTR_ERR(ar->firmware)); 398 return PTR_ERR(ar->firmware); 399 } 400 401 data = ar->firmware->data; 402 len = ar->firmware->size; 403 404 /* magic also includes the null byte, check that as well */ 405 magic_len = strlen(ATH10K_FIRMWARE_MAGIC) + 1; 406 407 if (len < magic_len) { 408 ath10k_err(ar, "firmware file '%s/%s' too small to contain magic: %zu\n", 409 ar->hw_params.fw.dir, name, len); 410 ret = -EINVAL; 411 goto err; 412 } 413 414 if (memcmp(data, ATH10K_FIRMWARE_MAGIC, magic_len) != 0) { 415 ath10k_err(ar, "invalid firmware magic\n"); 416 ret = -EINVAL; 417 goto err; 418 } 419 420 /* jump over the padding */ 421 magic_len = ALIGN(magic_len, 4); 422 423 len -= magic_len; 424 data += magic_len; 425 426 /* loop elements */ 427 while (len > sizeof(struct ath10k_fw_ie)) { 428 hdr = (struct ath10k_fw_ie *)data; 429 430 ie_id = le32_to_cpu(hdr->id); 431 ie_len = le32_to_cpu(hdr->len); 432 433 len -= sizeof(*hdr); 434 data += sizeof(*hdr); 435 436 if (len < ie_len) { 437 ath10k_err(ar, "invalid length for FW IE %d (%zu < %zu)\n", 438 ie_id, len, ie_len); 439 ret = -EINVAL; 440 goto err; 441 } 442 443 switch (ie_id) { 444 case ATH10K_FW_IE_FW_VERSION: 445 if (ie_len > sizeof(ar->hw->wiphy->fw_version) - 1) 446 break; 447 448 memcpy(ar->hw->wiphy->fw_version, data, ie_len); 449 ar->hw->wiphy->fw_version[ie_len] = '\0'; 450 451 ath10k_dbg(ar, ATH10K_DBG_BOOT, 452 "found fw version %s\n", 453 ar->hw->wiphy->fw_version); 454 break; 455 case ATH10K_FW_IE_TIMESTAMP: 456 if (ie_len != sizeof(u32)) 457 break; 458 459 timestamp = (__le32 *)data; 460 461 ath10k_dbg(ar, ATH10K_DBG_BOOT, "found fw timestamp %d\n", 462 le32_to_cpup(timestamp)); 463 break; 464 case ATH10K_FW_IE_FEATURES: 465 ath10k_dbg(ar, ATH10K_DBG_BOOT, 466 "found firmware features ie (%zd B)\n", 467 ie_len); 468 469 for (i = 0; i < ATH10K_FW_FEATURE_COUNT; i++) { 470 index = i / 8; 471 bit = i % 8; 472 473 if (index == ie_len) 474 break; 475 476 if (data[index] & (1 << bit)) { 477 ath10k_dbg(ar, ATH10K_DBG_BOOT, 478 "Enabling feature bit: %i\n", 479 i); 480 __set_bit(i, ar->fw_features); 481 } 482 } 483 484 ath10k_dbg_dump(ar, ATH10K_DBG_BOOT, "features", "", 485 ar->fw_features, 486 sizeof(ar->fw_features)); 487 break; 488 case ATH10K_FW_IE_FW_IMAGE: 489 ath10k_dbg(ar, ATH10K_DBG_BOOT, 490 "found fw image ie (%zd B)\n", 491 ie_len); 492 493 ar->firmware_data = data; 494 ar->firmware_len = ie_len; 495 496 break; 497 case ATH10K_FW_IE_OTP_IMAGE: 498 ath10k_dbg(ar, ATH10K_DBG_BOOT, 499 "found otp image ie (%zd B)\n", 500 ie_len); 501 502 ar->otp_data = data; 503 ar->otp_len = ie_len; 504 505 break; 506 default: 507 ath10k_warn(ar, "Unknown FW IE: %u\n", 508 le32_to_cpu(hdr->id)); 509 break; 510 } 511 512 /* jump over the padding */ 513 ie_len = ALIGN(ie_len, 4); 514 515 len -= ie_len; 516 data += ie_len; 517 } 518 519 if (!ar->firmware_data || !ar->firmware_len) { 520 ath10k_warn(ar, "No ATH10K_FW_IE_FW_IMAGE found from '%s/%s', skipping\n", 521 ar->hw_params.fw.dir, name); 522 ret = -ENOMEDIUM; 523 goto err; 524 } 525 526 if (test_bit(ATH10K_FW_FEATURE_WMI_10_2, ar->fw_features) && 527 !test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features)) { 528 ath10k_err(ar, "feature bits corrupted: 10.2 feature requires 10.x feature to be set as well"); 529 ret = -EINVAL; 530 goto err; 531 } 532 533 /* now fetch the board file */ 534 if (ar->hw_params.fw.board == NULL) { 535 ath10k_err(ar, "board data file not defined"); 536 ret = -EINVAL; 537 goto err; 538 } 539 540 ar->board = ath10k_fetch_fw_file(ar, 541 ar->hw_params.fw.dir, 542 ar->hw_params.fw.board); 543 if (IS_ERR(ar->board)) { 544 ret = PTR_ERR(ar->board); 545 ath10k_err(ar, "could not fetch board data '%s/%s' (%d)\n", 546 ar->hw_params.fw.dir, ar->hw_params.fw.board, 547 ret); 548 goto err; 549 } 550 551 ar->board_data = ar->board->data; 552 ar->board_len = ar->board->size; 553 554 return 0; 555 556 err: 557 ath10k_core_free_firmware_files(ar); 558 return ret; 559 } 560 561 static int ath10k_core_fetch_firmware_files(struct ath10k *ar) 562 { 563 int ret; 564 565 ar->fw_api = 3; 566 ath10k_dbg(ar, ATH10K_DBG_BOOT, "trying fw api %d\n", ar->fw_api); 567 568 ret = ath10k_core_fetch_firmware_api_n(ar, ATH10K_FW_API3_FILE); 569 if (ret == 0) 570 goto success; 571 572 ar->fw_api = 2; 573 ath10k_dbg(ar, ATH10K_DBG_BOOT, "trying fw api %d\n", ar->fw_api); 574 575 ret = ath10k_core_fetch_firmware_api_n(ar, ATH10K_FW_API2_FILE); 576 if (ret == 0) 577 goto success; 578 579 ar->fw_api = 1; 580 ath10k_dbg(ar, ATH10K_DBG_BOOT, "trying fw api %d\n", ar->fw_api); 581 582 ret = ath10k_core_fetch_firmware_api_1(ar); 583 if (ret) 584 return ret; 585 586 success: 587 ath10k_dbg(ar, ATH10K_DBG_BOOT, "using fw api %d\n", ar->fw_api); 588 589 return 0; 590 } 591 592 static int ath10k_init_download_firmware(struct ath10k *ar, 593 enum ath10k_firmware_mode mode) 594 { 595 int ret; 596 597 ret = ath10k_download_board_data(ar); 598 if (ret) { 599 ath10k_err(ar, "failed to download board data: %d\n", ret); 600 return ret; 601 } 602 603 ret = ath10k_download_and_run_otp(ar); 604 if (ret) { 605 ath10k_err(ar, "failed to run otp: %d\n", ret); 606 return ret; 607 } 608 609 ret = ath10k_download_fw(ar, mode); 610 if (ret) { 611 ath10k_err(ar, "failed to download firmware: %d\n", ret); 612 return ret; 613 } 614 615 return ret; 616 } 617 618 static int ath10k_init_uart(struct ath10k *ar) 619 { 620 int ret; 621 622 /* 623 * Explicitly setting UART prints to zero as target turns it on 624 * based on scratch registers. 625 */ 626 ret = ath10k_bmi_write32(ar, hi_serial_enable, 0); 627 if (ret) { 628 ath10k_warn(ar, "could not disable UART prints (%d)\n", ret); 629 return ret; 630 } 631 632 if (!uart_print) 633 return 0; 634 635 ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin, 7); 636 if (ret) { 637 ath10k_warn(ar, "could not enable UART prints (%d)\n", ret); 638 return ret; 639 } 640 641 ret = ath10k_bmi_write32(ar, hi_serial_enable, 1); 642 if (ret) { 643 ath10k_warn(ar, "could not enable UART prints (%d)\n", ret); 644 return ret; 645 } 646 647 /* Set the UART baud rate to 19200. */ 648 ret = ath10k_bmi_write32(ar, hi_desired_baud_rate, 19200); 649 if (ret) { 650 ath10k_warn(ar, "could not set the baud rate (%d)\n", ret); 651 return ret; 652 } 653 654 ath10k_info(ar, "UART prints enabled\n"); 655 return 0; 656 } 657 658 static int ath10k_init_hw_params(struct ath10k *ar) 659 { 660 const struct ath10k_hw_params *uninitialized_var(hw_params); 661 int i; 662 663 for (i = 0; i < ARRAY_SIZE(ath10k_hw_params_list); i++) { 664 hw_params = &ath10k_hw_params_list[i]; 665 666 if (hw_params->id == ar->target_version) 667 break; 668 } 669 670 if (i == ARRAY_SIZE(ath10k_hw_params_list)) { 671 ath10k_err(ar, "Unsupported hardware version: 0x%x\n", 672 ar->target_version); 673 return -EINVAL; 674 } 675 676 ar->hw_params = *hw_params; 677 678 ath10k_dbg(ar, ATH10K_DBG_BOOT, "Hardware name %s version 0x%x\n", 679 ar->hw_params.name, ar->target_version); 680 681 return 0; 682 } 683 684 static void ath10k_core_restart(struct work_struct *work) 685 { 686 struct ath10k *ar = container_of(work, struct ath10k, restart_work); 687 688 mutex_lock(&ar->conf_mutex); 689 690 switch (ar->state) { 691 case ATH10K_STATE_ON: 692 ar->state = ATH10K_STATE_RESTARTING; 693 ath10k_hif_stop(ar); 694 ath10k_scan_finish(ar); 695 ieee80211_restart_hw(ar->hw); 696 break; 697 case ATH10K_STATE_OFF: 698 /* this can happen if driver is being unloaded 699 * or if the crash happens during FW probing */ 700 ath10k_warn(ar, "cannot restart a device that hasn't been started\n"); 701 break; 702 case ATH10K_STATE_RESTARTING: 703 /* hw restart might be requested from multiple places */ 704 break; 705 case ATH10K_STATE_RESTARTED: 706 ar->state = ATH10K_STATE_WEDGED; 707 /* fall through */ 708 case ATH10K_STATE_WEDGED: 709 ath10k_warn(ar, "device is wedged, will not restart\n"); 710 break; 711 case ATH10K_STATE_UTF: 712 ath10k_warn(ar, "firmware restart in UTF mode not supported\n"); 713 break; 714 } 715 716 mutex_unlock(&ar->conf_mutex); 717 } 718 719 int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode) 720 { 721 int status; 722 723 lockdep_assert_held(&ar->conf_mutex); 724 725 ath10k_bmi_start(ar); 726 727 if (ath10k_init_configure_target(ar)) { 728 status = -EINVAL; 729 goto err; 730 } 731 732 status = ath10k_init_download_firmware(ar, mode); 733 if (status) 734 goto err; 735 736 status = ath10k_init_uart(ar); 737 if (status) 738 goto err; 739 740 ar->htc.htc_ops.target_send_suspend_complete = 741 ath10k_send_suspend_complete; 742 743 status = ath10k_htc_init(ar); 744 if (status) { 745 ath10k_err(ar, "could not init HTC (%d)\n", status); 746 goto err; 747 } 748 749 status = ath10k_bmi_done(ar); 750 if (status) 751 goto err; 752 753 status = ath10k_wmi_attach(ar); 754 if (status) { 755 ath10k_err(ar, "WMI attach failed: %d\n", status); 756 goto err; 757 } 758 759 status = ath10k_htt_init(ar); 760 if (status) { 761 ath10k_err(ar, "failed to init htt: %d\n", status); 762 goto err_wmi_detach; 763 } 764 765 status = ath10k_htt_tx_alloc(&ar->htt); 766 if (status) { 767 ath10k_err(ar, "failed to alloc htt tx: %d\n", status); 768 goto err_wmi_detach; 769 } 770 771 status = ath10k_htt_rx_alloc(&ar->htt); 772 if (status) { 773 ath10k_err(ar, "failed to alloc htt rx: %d\n", status); 774 goto err_htt_tx_detach; 775 } 776 777 status = ath10k_hif_start(ar); 778 if (status) { 779 ath10k_err(ar, "could not start HIF: %d\n", status); 780 goto err_htt_rx_detach; 781 } 782 783 status = ath10k_htc_wait_target(&ar->htc); 784 if (status) { 785 ath10k_err(ar, "failed to connect to HTC: %d\n", status); 786 goto err_hif_stop; 787 } 788 789 if (mode == ATH10K_FIRMWARE_MODE_NORMAL) { 790 status = ath10k_htt_connect(&ar->htt); 791 if (status) { 792 ath10k_err(ar, "failed to connect htt (%d)\n", status); 793 goto err_hif_stop; 794 } 795 } 796 797 status = ath10k_wmi_connect(ar); 798 if (status) { 799 ath10k_err(ar, "could not connect wmi: %d\n", status); 800 goto err_hif_stop; 801 } 802 803 status = ath10k_htc_start(&ar->htc); 804 if (status) { 805 ath10k_err(ar, "failed to start htc: %d\n", status); 806 goto err_hif_stop; 807 } 808 809 if (mode == ATH10K_FIRMWARE_MODE_NORMAL) { 810 status = ath10k_wmi_wait_for_service_ready(ar); 811 if (status <= 0) { 812 ath10k_warn(ar, "wmi service ready event not received"); 813 status = -ETIMEDOUT; 814 goto err_hif_stop; 815 } 816 } 817 818 ath10k_dbg(ar, ATH10K_DBG_BOOT, "firmware %s booted\n", 819 ar->hw->wiphy->fw_version); 820 821 status = ath10k_wmi_cmd_init(ar); 822 if (status) { 823 ath10k_err(ar, "could not send WMI init command (%d)\n", 824 status); 825 goto err_hif_stop; 826 } 827 828 status = ath10k_wmi_wait_for_unified_ready(ar); 829 if (status <= 0) { 830 ath10k_err(ar, "wmi unified ready event not received\n"); 831 status = -ETIMEDOUT; 832 goto err_hif_stop; 833 } 834 835 /* we don't care about HTT in UTF mode */ 836 if (mode == ATH10K_FIRMWARE_MODE_NORMAL) { 837 status = ath10k_htt_setup(&ar->htt); 838 if (status) { 839 ath10k_err(ar, "failed to setup htt: %d\n", status); 840 goto err_hif_stop; 841 } 842 } 843 844 status = ath10k_debug_start(ar); 845 if (status) 846 goto err_hif_stop; 847 848 if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features)) 849 ar->free_vdev_map = (1 << TARGET_10X_NUM_VDEVS) - 1; 850 else 851 ar->free_vdev_map = (1 << TARGET_NUM_VDEVS) - 1; 852 853 INIT_LIST_HEAD(&ar->arvifs); 854 855 return 0; 856 857 err_hif_stop: 858 ath10k_hif_stop(ar); 859 err_htt_rx_detach: 860 ath10k_htt_rx_free(&ar->htt); 861 err_htt_tx_detach: 862 ath10k_htt_tx_free(&ar->htt); 863 err_wmi_detach: 864 ath10k_wmi_detach(ar); 865 err: 866 return status; 867 } 868 EXPORT_SYMBOL(ath10k_core_start); 869 870 int ath10k_wait_for_suspend(struct ath10k *ar, u32 suspend_opt) 871 { 872 int ret; 873 874 reinit_completion(&ar->target_suspend); 875 876 ret = ath10k_wmi_pdev_suspend_target(ar, suspend_opt); 877 if (ret) { 878 ath10k_warn(ar, "could not suspend target (%d)\n", ret); 879 return ret; 880 } 881 882 ret = wait_for_completion_timeout(&ar->target_suspend, 1 * HZ); 883 884 if (ret == 0) { 885 ath10k_warn(ar, "suspend timed out - target pause event never came\n"); 886 return -ETIMEDOUT; 887 } 888 889 return 0; 890 } 891 892 void ath10k_core_stop(struct ath10k *ar) 893 { 894 lockdep_assert_held(&ar->conf_mutex); 895 896 /* try to suspend target */ 897 if (ar->state != ATH10K_STATE_RESTARTING && 898 ar->state != ATH10K_STATE_UTF) 899 ath10k_wait_for_suspend(ar, WMI_PDEV_SUSPEND_AND_DISABLE_INTR); 900 901 ath10k_debug_stop(ar); 902 ath10k_hif_stop(ar); 903 ath10k_htt_tx_free(&ar->htt); 904 ath10k_htt_rx_free(&ar->htt); 905 ath10k_wmi_detach(ar); 906 } 907 EXPORT_SYMBOL(ath10k_core_stop); 908 909 /* mac80211 manages fw/hw initialization through start/stop hooks. However in 910 * order to know what hw capabilities should be advertised to mac80211 it is 911 * necessary to load the firmware (and tear it down immediately since start 912 * hook will try to init it again) before registering */ 913 static int ath10k_core_probe_fw(struct ath10k *ar) 914 { 915 struct bmi_target_info target_info; 916 int ret = 0; 917 918 ret = ath10k_hif_power_up(ar); 919 if (ret) { 920 ath10k_err(ar, "could not start pci hif (%d)\n", ret); 921 return ret; 922 } 923 924 memset(&target_info, 0, sizeof(target_info)); 925 ret = ath10k_bmi_get_target_info(ar, &target_info); 926 if (ret) { 927 ath10k_err(ar, "could not get target info (%d)\n", ret); 928 ath10k_hif_power_down(ar); 929 return ret; 930 } 931 932 ar->target_version = target_info.version; 933 ar->hw->wiphy->hw_version = target_info.version; 934 935 ret = ath10k_init_hw_params(ar); 936 if (ret) { 937 ath10k_err(ar, "could not get hw params (%d)\n", ret); 938 ath10k_hif_power_down(ar); 939 return ret; 940 } 941 942 ret = ath10k_core_fetch_firmware_files(ar); 943 if (ret) { 944 ath10k_err(ar, "could not fetch firmware files (%d)\n", ret); 945 ath10k_hif_power_down(ar); 946 return ret; 947 } 948 949 mutex_lock(&ar->conf_mutex); 950 951 ret = ath10k_core_start(ar, ATH10K_FIRMWARE_MODE_NORMAL); 952 if (ret) { 953 ath10k_err(ar, "could not init core (%d)\n", ret); 954 ath10k_core_free_firmware_files(ar); 955 ath10k_hif_power_down(ar); 956 mutex_unlock(&ar->conf_mutex); 957 return ret; 958 } 959 960 ath10k_print_driver_info(ar); 961 ath10k_core_stop(ar); 962 963 mutex_unlock(&ar->conf_mutex); 964 965 ath10k_hif_power_down(ar); 966 return 0; 967 } 968 969 static int ath10k_core_check_chip_id(struct ath10k *ar) 970 { 971 u32 hw_revision = MS(ar->chip_id, SOC_CHIP_ID_REV); 972 973 ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot chip_id 0x%08x hw_revision 0x%x\n", 974 ar->chip_id, hw_revision); 975 976 /* Check that we are not using hw1.0 (some of them have same pci id 977 * as hw2.0) before doing anything else as ath10k crashes horribly 978 * due to missing hw1.0 workarounds. */ 979 switch (hw_revision) { 980 case QCA988X_HW_1_0_CHIP_ID_REV: 981 ath10k_err(ar, "ERROR: qca988x hw1.0 is not supported\n"); 982 return -EOPNOTSUPP; 983 984 case QCA988X_HW_2_0_CHIP_ID_REV: 985 /* known hardware revision, continue normally */ 986 return 0; 987 988 default: 989 ath10k_warn(ar, "Warning: hardware revision unknown (0x%x), expect problems\n", 990 ar->chip_id); 991 return 0; 992 } 993 994 return 0; 995 } 996 997 static void ath10k_core_register_work(struct work_struct *work) 998 { 999 struct ath10k *ar = container_of(work, struct ath10k, register_work); 1000 int status; 1001 1002 status = ath10k_core_probe_fw(ar); 1003 if (status) { 1004 ath10k_err(ar, "could not probe fw (%d)\n", status); 1005 goto err; 1006 } 1007 1008 status = ath10k_mac_register(ar); 1009 if (status) { 1010 ath10k_err(ar, "could not register to mac80211 (%d)\n", status); 1011 goto err_release_fw; 1012 } 1013 1014 status = ath10k_debug_register(ar); 1015 if (status) { 1016 ath10k_err(ar, "unable to initialize debugfs\n"); 1017 goto err_unregister_mac; 1018 } 1019 1020 status = ath10k_spectral_create(ar); 1021 if (status) { 1022 ath10k_err(ar, "failed to initialize spectral\n"); 1023 goto err_debug_destroy; 1024 } 1025 1026 set_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags); 1027 return; 1028 1029 err_debug_destroy: 1030 ath10k_debug_destroy(ar); 1031 err_unregister_mac: 1032 ath10k_mac_unregister(ar); 1033 err_release_fw: 1034 ath10k_core_free_firmware_files(ar); 1035 err: 1036 /* TODO: It's probably a good idea to release device from the driver 1037 * but calling device_release_driver() here will cause a deadlock. 1038 */ 1039 return; 1040 } 1041 1042 int ath10k_core_register(struct ath10k *ar, u32 chip_id) 1043 { 1044 int status; 1045 1046 ar->chip_id = chip_id; 1047 1048 status = ath10k_core_check_chip_id(ar); 1049 if (status) { 1050 ath10k_err(ar, "Unsupported chip id 0x%08x\n", ar->chip_id); 1051 return status; 1052 } 1053 1054 queue_work(ar->workqueue, &ar->register_work); 1055 1056 return 0; 1057 } 1058 EXPORT_SYMBOL(ath10k_core_register); 1059 1060 void ath10k_core_unregister(struct ath10k *ar) 1061 { 1062 cancel_work_sync(&ar->register_work); 1063 1064 if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags)) 1065 return; 1066 1067 /* Stop spectral before unregistering from mac80211 to remove the 1068 * relayfs debugfs file cleanly. Otherwise the parent debugfs tree 1069 * would be already be free'd recursively, leading to a double free. 1070 */ 1071 ath10k_spectral_destroy(ar); 1072 1073 /* We must unregister from mac80211 before we stop HTC and HIF. 1074 * Otherwise we will fail to submit commands to FW and mac80211 will be 1075 * unhappy about callback failures. */ 1076 ath10k_mac_unregister(ar); 1077 1078 ath10k_testmode_destroy(ar); 1079 1080 ath10k_core_free_firmware_files(ar); 1081 1082 ath10k_debug_unregister(ar); 1083 } 1084 EXPORT_SYMBOL(ath10k_core_unregister); 1085 1086 struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev, 1087 const struct ath10k_hif_ops *hif_ops) 1088 { 1089 struct ath10k *ar; 1090 int ret; 1091 1092 ar = ath10k_mac_create(priv_size); 1093 if (!ar) 1094 return NULL; 1095 1096 ar->ath_common.priv = ar; 1097 ar->ath_common.hw = ar->hw; 1098 1099 ar->p2p = !!ath10k_p2p; 1100 ar->dev = dev; 1101 1102 ar->hif.ops = hif_ops; 1103 1104 init_completion(&ar->scan.started); 1105 init_completion(&ar->scan.completed); 1106 init_completion(&ar->scan.on_channel); 1107 init_completion(&ar->target_suspend); 1108 1109 init_completion(&ar->install_key_done); 1110 init_completion(&ar->vdev_setup_done); 1111 1112 INIT_DELAYED_WORK(&ar->scan.timeout, ath10k_scan_timeout_work); 1113 1114 ar->workqueue = create_singlethread_workqueue("ath10k_wq"); 1115 if (!ar->workqueue) 1116 goto err_free_mac; 1117 1118 mutex_init(&ar->conf_mutex); 1119 spin_lock_init(&ar->data_lock); 1120 1121 INIT_LIST_HEAD(&ar->peers); 1122 init_waitqueue_head(&ar->peer_mapping_wq); 1123 1124 init_completion(&ar->offchan_tx_completed); 1125 INIT_WORK(&ar->offchan_tx_work, ath10k_offchan_tx_work); 1126 skb_queue_head_init(&ar->offchan_tx_queue); 1127 1128 INIT_WORK(&ar->wmi_mgmt_tx_work, ath10k_mgmt_over_wmi_tx_work); 1129 skb_queue_head_init(&ar->wmi_mgmt_tx_queue); 1130 1131 INIT_WORK(&ar->register_work, ath10k_core_register_work); 1132 INIT_WORK(&ar->restart_work, ath10k_core_restart); 1133 1134 ret = ath10k_debug_create(ar); 1135 if (ret) 1136 goto err_free_wq; 1137 1138 return ar; 1139 1140 err_free_wq: 1141 destroy_workqueue(ar->workqueue); 1142 1143 err_free_mac: 1144 ath10k_mac_destroy(ar); 1145 1146 return NULL; 1147 } 1148 EXPORT_SYMBOL(ath10k_core_create); 1149 1150 void ath10k_core_destroy(struct ath10k *ar) 1151 { 1152 flush_workqueue(ar->workqueue); 1153 destroy_workqueue(ar->workqueue); 1154 1155 ath10k_debug_destroy(ar); 1156 ath10k_mac_destroy(ar); 1157 } 1158 EXPORT_SYMBOL(ath10k_core_destroy); 1159 1160 MODULE_AUTHOR("Qualcomm Atheros"); 1161 MODULE_DESCRIPTION("Core module for QCA988X PCIe devices."); 1162 MODULE_LICENSE("Dual BSD/GPL"); 1163