xref: /openbmc/linux/drivers/net/wireless/Kconfig (revision fb37409a)
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Wireless LAN device configuration
4#
5
6menuconfig WLAN
7	bool "Wireless LAN"
8	depends on !S390
9	depends on NET
10	select WIRELESS
11	default y
12	help
13	  This section contains all the pre 802.11 and 802.11 wireless
14	  device drivers. For a complete list of drivers and documentation
15	  on them refer to the wireless wiki:
16
17	  http://wireless.kernel.org/en/users/Drivers
18
19if WLAN
20
21config WIRELESS_WDS
22	bool "mac80211-based legacy WDS support" if EXPERT
23	help
24	  This option enables the deprecated WDS support, the newer
25	  mac80211-based 4-addr AP/client support supersedes it with
26	  a much better feature set (HT, VHT, ...)
27
28	  We plan to remove this option and code, so if you find
29	  that you have to enable it, please let us know on the
30	  linux-wireless@vger.kernel.org mailing list, so we can
31	  help you migrate to 4-addr AP/client (or, if it's really
32	  necessary, give up on our plan of removing it).
33
34source "drivers/net/wireless/admtek/Kconfig"
35source "drivers/net/wireless/ath/Kconfig"
36source "drivers/net/wireless/atmel/Kconfig"
37source "drivers/net/wireless/broadcom/Kconfig"
38source "drivers/net/wireless/cisco/Kconfig"
39source "drivers/net/wireless/intel/Kconfig"
40source "drivers/net/wireless/intersil/Kconfig"
41source "drivers/net/wireless/marvell/Kconfig"
42source "drivers/net/wireless/mediatek/Kconfig"
43source "drivers/net/wireless/ralink/Kconfig"
44source "drivers/net/wireless/realtek/Kconfig"
45source "drivers/net/wireless/rsi/Kconfig"
46source "drivers/net/wireless/st/Kconfig"
47source "drivers/net/wireless/ti/Kconfig"
48source "drivers/net/wireless/zydas/Kconfig"
49source "drivers/net/wireless/quantenna/Kconfig"
50
51config PCMCIA_RAYCS
52	tristate "Aviator/Raytheon 2.4GHz wireless support"
53	depends on PCMCIA
54	select WIRELESS_EXT
55	select WEXT_SPY
56	select WEXT_PRIV
57	help
58	  Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
59	  (PC-card) wireless Ethernet networking card to your computer.
60	  Please read the file <file:Documentation/networking/ray_cs.rst> for
61	  details.
62
63	  To compile this driver as a module, choose M here: the module will be
64	  called ray_cs.  If unsure, say N.
65
66config PCMCIA_WL3501
67	tristate "Planet WL3501 PCMCIA cards"
68	depends on CFG80211 && PCMCIA
69	select WIRELESS_EXT
70	select WEXT_SPY
71	help
72	  A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
73	  It has basic support for Linux wireless extensions and initial
74	  micro support for ethtool.
75
76config MAC80211_HWSIM
77	tristate "Simulated radio testing tool for mac80211"
78	depends on MAC80211
79	help
80	  This driver is a developer testing tool that can be used to test
81	  IEEE 802.11 networking stack (mac80211) functionality. This is not
82	  needed for normal wireless LAN usage and is only for testing. See
83	  Documentation/networking/mac80211_hwsim for more information on how
84	  to use this tool.
85
86	  To compile this driver as a module, choose M here: the module will be
87	  called mac80211_hwsim.  If unsure, say N.
88
89config USB_NET_RNDIS_WLAN
90	tristate "Wireless RNDIS USB support"
91	depends on USB
92	depends on CFG80211
93	select USB_NET_DRIVERS
94	select USB_USBNET
95	select USB_NET_CDCETHER
96	select USB_NET_RNDIS_HOST
97	help
98	  This is a driver for wireless RNDIS devices.
99	  These are USB based adapters found in devices such as:
100
101	  Buffalo WLI-U2-KG125S
102	  U.S. Robotics USR5421
103	  Belkin F5D7051
104	  Linksys WUSB54GSv2
105	  Linksys WUSB54GSC
106	  Asus WL169gE
107	  Eminent EM4045
108	  BT Voyager 1055
109	  Linksys WUSB54GSv1
110	  U.S. Robotics USR5420
111	  BUFFALO WLI-USB-G54
112
113	  All of these devices are based on Broadcom 4320 chip which is the
114	  only wireless RNDIS chip known to date.
115
116	  If you choose to build a module, it'll be called rndis_wlan.
117
118config VIRT_WIFI
119	tristate "Wifi wrapper for ethernet drivers"
120	depends on CFG80211
121	help
122	  This option adds support for ethernet connections to appear as if they
123	  are wifi connections through a special rtnetlink device.
124
125endif # WLAN
126