xref: /openbmc/linux/drivers/net/wireless/Kconfig (revision 8fdf9062)
1#
2# Wireless LAN device configuration
3#
4
5menuconfig WLAN
6	bool "Wireless LAN"
7	depends on !S390
8	depends on NET
9	select WIRELESS
10	default y
11	---help---
12	  This section contains all the pre 802.11 and 802.11 wireless
13	  device drivers. For a complete list of drivers and documentation
14	  on them refer to the wireless wiki:
15
16	  http://wireless.kernel.org/en/users/Drivers
17
18if WLAN
19
20config WIRELESS_WDS
21	bool "mac80211-based legacy WDS support" if EXPERT
22	help
23	  This option enables the deprecated WDS support, the newer
24	  mac80211-based 4-addr AP/client support supersedes it with
25	  a much better feature set (HT, VHT, ...)
26
27	  We plan to remove this option and code, so if you find
28	  that you have to enable it, please let us know on the
29	  linux-wireless@vger.kernel.org mailing list, so we can
30	  help you migrate to 4-addr AP/client (or, if it's really
31	  necessary, give up on our plan of removing it).
32
33source "drivers/net/wireless/admtek/Kconfig"
34source "drivers/net/wireless/ath/Kconfig"
35source "drivers/net/wireless/atmel/Kconfig"
36source "drivers/net/wireless/broadcom/Kconfig"
37source "drivers/net/wireless/cisco/Kconfig"
38source "drivers/net/wireless/intel/Kconfig"
39source "drivers/net/wireless/intersil/Kconfig"
40source "drivers/net/wireless/marvell/Kconfig"
41source "drivers/net/wireless/mediatek/Kconfig"
42source "drivers/net/wireless/ralink/Kconfig"
43source "drivers/net/wireless/realtek/Kconfig"
44source "drivers/net/wireless/rsi/Kconfig"
45source "drivers/net/wireless/st/Kconfig"
46source "drivers/net/wireless/ti/Kconfig"
47source "drivers/net/wireless/zydas/Kconfig"
48source "drivers/net/wireless/quantenna/Kconfig"
49
50config PCMCIA_RAYCS
51	tristate "Aviator/Raytheon 2.4GHz wireless support"
52	depends on PCMCIA
53	select WIRELESS_EXT
54	select WEXT_SPY
55	select WEXT_PRIV
56	---help---
57	  Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
58	  (PC-card) wireless Ethernet networking card to your computer.
59	  Please read the file <file:Documentation/networking/ray_cs.txt> for
60	  details.
61
62	  To compile this driver as a module, choose M here: the module will be
63	  called ray_cs.  If unsure, say N.
64
65config PCMCIA_WL3501
66	tristate "Planet WL3501 PCMCIA cards"
67	depends on CFG80211 && PCMCIA
68	select WIRELESS_EXT
69	select WEXT_SPY
70	help
71	  A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
72	  It has basic support for Linux wireless extensions and initial
73	  micro support for ethtool.
74
75config MAC80211_HWSIM
76	tristate "Simulated radio testing tool for mac80211"
77	depends on MAC80211
78	---help---
79	  This driver is a developer testing tool that can be used to test
80	  IEEE 802.11 networking stack (mac80211) functionality. This is not
81	  needed for normal wireless LAN usage and is only for testing. See
82	  Documentation/networking/mac80211_hwsim for more information on how
83	  to use this tool.
84
85	  To compile this driver as a module, choose M here: the module will be
86	  called mac80211_hwsim.  If unsure, say N.
87
88config USB_NET_RNDIS_WLAN
89	tristate "Wireless RNDIS USB support"
90	depends on USB
91	depends on CFG80211
92	select USB_NET_DRIVERS
93	select USB_USBNET
94	select USB_NET_CDCETHER
95	select USB_NET_RNDIS_HOST
96	---help---
97	  This is a driver for wireless RNDIS devices.
98	  These are USB based adapters found in devices such as:
99
100	  Buffalo WLI-U2-KG125S
101	  U.S. Robotics USR5421
102	  Belkin F5D7051
103	  Linksys WUSB54GSv2
104	  Linksys WUSB54GSC
105	  Asus WL169gE
106	  Eminent EM4045
107	  BT Voyager 1055
108	  Linksys WUSB54GSv1
109	  U.S. Robotics USR5420
110	  BUFFALO WLI-USB-G54
111
112	  All of these devices are based on Broadcom 4320 chip which is the
113	  only wireless RNDIS chip known to date.
114
115	  If you choose to build a module, it'll be called rndis_wlan.
116
117config VIRT_WIFI
118	tristate "Wifi wrapper for ethernet drivers"
119	depends on CFG80211
120	---help---
121	  This option adds support for ethernet connections to appear as if they
122	  are wifi connections through a special rtnetlink device.
123
124endif # WLAN
125