1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * wanXL serial card driver for Linux 4 * host part 5 * 6 * Copyright (C) 2003 Krzysztof Halasa <khc@pm.waw.pl> 7 * 8 * Status: 9 * - Only DTE (external clock) support with NRZ and NRZI encodings 10 * - wanXL100 will require minor driver modifications, no access to hw 11 */ 12 13 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 14 15 #include <linux/module.h> 16 #include <linux/kernel.h> 17 #include <linux/slab.h> 18 #include <linux/sched.h> 19 #include <linux/types.h> 20 #include <linux/fcntl.h> 21 #include <linux/string.h> 22 #include <linux/errno.h> 23 #include <linux/init.h> 24 #include <linux/interrupt.h> 25 #include <linux/ioport.h> 26 #include <linux/netdevice.h> 27 #include <linux/hdlc.h> 28 #include <linux/pci.h> 29 #include <linux/dma-mapping.h> 30 #include <linux/delay.h> 31 #include <asm/io.h> 32 33 #include "wanxl.h" 34 35 static const char* version = "wanXL serial card driver version: 0.48"; 36 37 #define PLX_CTL_RESET 0x40000000 /* adapter reset */ 38 39 #undef DEBUG_PKT 40 #undef DEBUG_PCI 41 42 /* MAILBOX #1 - PUTS COMMANDS */ 43 #define MBX1_CMD_ABORTJ 0x85000000 /* Abort and Jump */ 44 #ifdef __LITTLE_ENDIAN 45 #define MBX1_CMD_BSWAP 0x8C000001 /* little-endian Byte Swap Mode */ 46 #else 47 #define MBX1_CMD_BSWAP 0x8C000000 /* big-endian Byte Swap Mode */ 48 #endif 49 50 /* MAILBOX #2 - DRAM SIZE */ 51 #define MBX2_MEMSZ_MASK 0xFFFF0000 /* PUTS Memory Size Register mask */ 52 53 54 struct port { 55 struct net_device *dev; 56 struct card *card; 57 spinlock_t lock; /* for wanxl_xmit */ 58 int node; /* physical port #0 - 3 */ 59 unsigned int clock_type; 60 int tx_in, tx_out; 61 struct sk_buff *tx_skbs[TX_BUFFERS]; 62 }; 63 64 65 struct card_status { 66 desc_t rx_descs[RX_QUEUE_LENGTH]; 67 port_status_t port_status[4]; 68 }; 69 70 71 struct card { 72 int n_ports; /* 1, 2 or 4 ports */ 73 u8 irq; 74 75 u8 __iomem *plx; /* PLX PCI9060 virtual base address */ 76 struct pci_dev *pdev; /* for pci_name(pdev) */ 77 int rx_in; 78 struct sk_buff *rx_skbs[RX_QUEUE_LENGTH]; 79 struct card_status *status; /* shared between host and card */ 80 dma_addr_t status_address; 81 struct port ports[]; /* 1 - 4 port structures follow */ 82 }; 83 84 85 86 static inline struct port *dev_to_port(struct net_device *dev) 87 { 88 return (struct port *)dev_to_hdlc(dev)->priv; 89 } 90 91 92 static inline port_status_t *get_status(struct port *port) 93 { 94 return &port->card->status->port_status[port->node]; 95 } 96 97 98 #ifdef DEBUG_PCI 99 static inline dma_addr_t pci_map_single_debug(struct pci_dev *pdev, void *ptr, 100 size_t size, int direction) 101 { 102 dma_addr_t addr = pci_map_single(pdev, ptr, size, direction); 103 if (addr + size > 0x100000000LL) 104 pr_crit("%s: pci_map_single() returned memory at 0x%llx!\n", 105 pci_name(pdev), (unsigned long long)addr); 106 return addr; 107 } 108 109 #undef pci_map_single 110 #define pci_map_single pci_map_single_debug 111 #endif 112 113 114 /* Cable and/or personality module change interrupt service */ 115 static inline void wanxl_cable_intr(struct port *port) 116 { 117 u32 value = get_status(port)->cable; 118 int valid = 1; 119 const char *cable, *pm, *dte = "", *dsr = "", *dcd = ""; 120 121 switch(value & 0x7) { 122 case STATUS_CABLE_V35: cable = "V.35"; break; 123 case STATUS_CABLE_X21: cable = "X.21"; break; 124 case STATUS_CABLE_V24: cable = "V.24"; break; 125 case STATUS_CABLE_EIA530: cable = "EIA530"; break; 126 case STATUS_CABLE_NONE: cable = "no"; break; 127 default: cable = "invalid"; 128 } 129 130 switch((value >> STATUS_CABLE_PM_SHIFT) & 0x7) { 131 case STATUS_CABLE_V35: pm = "V.35"; break; 132 case STATUS_CABLE_X21: pm = "X.21"; break; 133 case STATUS_CABLE_V24: pm = "V.24"; break; 134 case STATUS_CABLE_EIA530: pm = "EIA530"; break; 135 case STATUS_CABLE_NONE: pm = "no personality"; valid = 0; break; 136 default: pm = "invalid personality"; valid = 0; 137 } 138 139 if (valid) { 140 if ((value & 7) == ((value >> STATUS_CABLE_PM_SHIFT) & 7)) { 141 dsr = (value & STATUS_CABLE_DSR) ? ", DSR ON" : 142 ", DSR off"; 143 dcd = (value & STATUS_CABLE_DCD) ? ", carrier ON" : 144 ", carrier off"; 145 } 146 dte = (value & STATUS_CABLE_DCE) ? " DCE" : " DTE"; 147 } 148 netdev_info(port->dev, "%s%s module, %s cable%s%s\n", 149 pm, dte, cable, dsr, dcd); 150 151 if (value & STATUS_CABLE_DCD) 152 netif_carrier_on(port->dev); 153 else 154 netif_carrier_off(port->dev); 155 } 156 157 158 159 /* Transmit complete interrupt service */ 160 static inline void wanxl_tx_intr(struct port *port) 161 { 162 struct net_device *dev = port->dev; 163 while (1) { 164 desc_t *desc = &get_status(port)->tx_descs[port->tx_in]; 165 struct sk_buff *skb = port->tx_skbs[port->tx_in]; 166 167 switch (desc->stat) { 168 case PACKET_FULL: 169 case PACKET_EMPTY: 170 netif_wake_queue(dev); 171 return; 172 173 case PACKET_UNDERRUN: 174 dev->stats.tx_errors++; 175 dev->stats.tx_fifo_errors++; 176 break; 177 178 default: 179 dev->stats.tx_packets++; 180 dev->stats.tx_bytes += skb->len; 181 } 182 desc->stat = PACKET_EMPTY; /* Free descriptor */ 183 pci_unmap_single(port->card->pdev, desc->address, skb->len, 184 PCI_DMA_TODEVICE); 185 dev_consume_skb_irq(skb); 186 port->tx_in = (port->tx_in + 1) % TX_BUFFERS; 187 } 188 } 189 190 191 192 /* Receive complete interrupt service */ 193 static inline void wanxl_rx_intr(struct card *card) 194 { 195 desc_t *desc; 196 while (desc = &card->status->rx_descs[card->rx_in], 197 desc->stat != PACKET_EMPTY) { 198 if ((desc->stat & PACKET_PORT_MASK) > card->n_ports) 199 pr_crit("%s: received packet for nonexistent port\n", 200 pci_name(card->pdev)); 201 else { 202 struct sk_buff *skb = card->rx_skbs[card->rx_in]; 203 struct port *port = &card->ports[desc->stat & 204 PACKET_PORT_MASK]; 205 struct net_device *dev = port->dev; 206 207 if (!skb) 208 dev->stats.rx_dropped++; 209 else { 210 pci_unmap_single(card->pdev, desc->address, 211 BUFFER_LENGTH, 212 PCI_DMA_FROMDEVICE); 213 skb_put(skb, desc->length); 214 215 #ifdef DEBUG_PKT 216 printk(KERN_DEBUG "%s RX(%i):", dev->name, 217 skb->len); 218 debug_frame(skb); 219 #endif 220 dev->stats.rx_packets++; 221 dev->stats.rx_bytes += skb->len; 222 skb->protocol = hdlc_type_trans(skb, dev); 223 netif_rx(skb); 224 skb = NULL; 225 } 226 227 if (!skb) { 228 skb = dev_alloc_skb(BUFFER_LENGTH); 229 desc->address = skb ? 230 pci_map_single(card->pdev, skb->data, 231 BUFFER_LENGTH, 232 PCI_DMA_FROMDEVICE) : 0; 233 card->rx_skbs[card->rx_in] = skb; 234 } 235 } 236 desc->stat = PACKET_EMPTY; /* Free descriptor */ 237 card->rx_in = (card->rx_in + 1) % RX_QUEUE_LENGTH; 238 } 239 } 240 241 242 243 static irqreturn_t wanxl_intr(int irq, void* dev_id) 244 { 245 struct card *card = dev_id; 246 int i; 247 u32 stat; 248 int handled = 0; 249 250 251 while((stat = readl(card->plx + PLX_DOORBELL_FROM_CARD)) != 0) { 252 handled = 1; 253 writel(stat, card->plx + PLX_DOORBELL_FROM_CARD); 254 255 for (i = 0; i < card->n_ports; i++) { 256 if (stat & (1 << (DOORBELL_FROM_CARD_TX_0 + i))) 257 wanxl_tx_intr(&card->ports[i]); 258 if (stat & (1 << (DOORBELL_FROM_CARD_CABLE_0 + i))) 259 wanxl_cable_intr(&card->ports[i]); 260 } 261 if (stat & (1 << DOORBELL_FROM_CARD_RX)) 262 wanxl_rx_intr(card); 263 } 264 265 return IRQ_RETVAL(handled); 266 } 267 268 269 270 static netdev_tx_t wanxl_xmit(struct sk_buff *skb, struct net_device *dev) 271 { 272 struct port *port = dev_to_port(dev); 273 desc_t *desc; 274 275 spin_lock(&port->lock); 276 277 desc = &get_status(port)->tx_descs[port->tx_out]; 278 if (desc->stat != PACKET_EMPTY) { 279 /* should never happen - previous xmit should stop queue */ 280 #ifdef DEBUG_PKT 281 printk(KERN_DEBUG "%s: transmitter buffer full\n", dev->name); 282 #endif 283 netif_stop_queue(dev); 284 spin_unlock(&port->lock); 285 return NETDEV_TX_BUSY; /* request packet to be queued */ 286 } 287 288 #ifdef DEBUG_PKT 289 printk(KERN_DEBUG "%s TX(%i):", dev->name, skb->len); 290 debug_frame(skb); 291 #endif 292 293 port->tx_skbs[port->tx_out] = skb; 294 desc->address = pci_map_single(port->card->pdev, skb->data, skb->len, 295 PCI_DMA_TODEVICE); 296 desc->length = skb->len; 297 desc->stat = PACKET_FULL; 298 writel(1 << (DOORBELL_TO_CARD_TX_0 + port->node), 299 port->card->plx + PLX_DOORBELL_TO_CARD); 300 301 port->tx_out = (port->tx_out + 1) % TX_BUFFERS; 302 303 if (get_status(port)->tx_descs[port->tx_out].stat != PACKET_EMPTY) { 304 netif_stop_queue(dev); 305 #ifdef DEBUG_PKT 306 printk(KERN_DEBUG "%s: transmitter buffer full\n", dev->name); 307 #endif 308 } 309 310 spin_unlock(&port->lock); 311 return NETDEV_TX_OK; 312 } 313 314 315 316 static int wanxl_attach(struct net_device *dev, unsigned short encoding, 317 unsigned short parity) 318 { 319 struct port *port = dev_to_port(dev); 320 321 if (encoding != ENCODING_NRZ && 322 encoding != ENCODING_NRZI) 323 return -EINVAL; 324 325 if (parity != PARITY_NONE && 326 parity != PARITY_CRC32_PR1_CCITT && 327 parity != PARITY_CRC16_PR1_CCITT && 328 parity != PARITY_CRC32_PR0_CCITT && 329 parity != PARITY_CRC16_PR0_CCITT) 330 return -EINVAL; 331 332 get_status(port)->encoding = encoding; 333 get_status(port)->parity = parity; 334 return 0; 335 } 336 337 338 339 static int wanxl_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) 340 { 341 const size_t size = sizeof(sync_serial_settings); 342 sync_serial_settings line; 343 struct port *port = dev_to_port(dev); 344 345 if (cmd != SIOCWANDEV) 346 return hdlc_ioctl(dev, ifr, cmd); 347 348 switch (ifr->ifr_settings.type) { 349 case IF_GET_IFACE: 350 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL; 351 if (ifr->ifr_settings.size < size) { 352 ifr->ifr_settings.size = size; /* data size wanted */ 353 return -ENOBUFS; 354 } 355 memset(&line, 0, sizeof(line)); 356 line.clock_type = get_status(port)->clocking; 357 line.clock_rate = 0; 358 line.loopback = 0; 359 360 if (copy_to_user(ifr->ifr_settings.ifs_ifsu.sync, &line, size)) 361 return -EFAULT; 362 return 0; 363 364 case IF_IFACE_SYNC_SERIAL: 365 if (!capable(CAP_NET_ADMIN)) 366 return -EPERM; 367 if (dev->flags & IFF_UP) 368 return -EBUSY; 369 370 if (copy_from_user(&line, ifr->ifr_settings.ifs_ifsu.sync, 371 size)) 372 return -EFAULT; 373 374 if (line.clock_type != CLOCK_EXT && 375 line.clock_type != CLOCK_TXFROMRX) 376 return -EINVAL; /* No such clock setting */ 377 378 if (line.loopback != 0) 379 return -EINVAL; 380 381 get_status(port)->clocking = line.clock_type; 382 return 0; 383 384 default: 385 return hdlc_ioctl(dev, ifr, cmd); 386 } 387 } 388 389 390 391 static int wanxl_open(struct net_device *dev) 392 { 393 struct port *port = dev_to_port(dev); 394 u8 __iomem *dbr = port->card->plx + PLX_DOORBELL_TO_CARD; 395 unsigned long timeout; 396 int i; 397 398 if (get_status(port)->open) { 399 netdev_err(dev, "port already open\n"); 400 return -EIO; 401 } 402 if ((i = hdlc_open(dev)) != 0) 403 return i; 404 405 port->tx_in = port->tx_out = 0; 406 for (i = 0; i < TX_BUFFERS; i++) 407 get_status(port)->tx_descs[i].stat = PACKET_EMPTY; 408 /* signal the card */ 409 writel(1 << (DOORBELL_TO_CARD_OPEN_0 + port->node), dbr); 410 411 timeout = jiffies + HZ; 412 do { 413 if (get_status(port)->open) { 414 netif_start_queue(dev); 415 return 0; 416 } 417 } while (time_after(timeout, jiffies)); 418 419 netdev_err(dev, "unable to open port\n"); 420 /* ask the card to close the port, should it be still alive */ 421 writel(1 << (DOORBELL_TO_CARD_CLOSE_0 + port->node), dbr); 422 return -EFAULT; 423 } 424 425 426 427 static int wanxl_close(struct net_device *dev) 428 { 429 struct port *port = dev_to_port(dev); 430 unsigned long timeout; 431 int i; 432 433 hdlc_close(dev); 434 /* signal the card */ 435 writel(1 << (DOORBELL_TO_CARD_CLOSE_0 + port->node), 436 port->card->plx + PLX_DOORBELL_TO_CARD); 437 438 timeout = jiffies + HZ; 439 do { 440 if (!get_status(port)->open) 441 break; 442 } while (time_after(timeout, jiffies)); 443 444 if (get_status(port)->open) 445 netdev_err(dev, "unable to close port\n"); 446 447 netif_stop_queue(dev); 448 449 for (i = 0; i < TX_BUFFERS; i++) { 450 desc_t *desc = &get_status(port)->tx_descs[i]; 451 452 if (desc->stat != PACKET_EMPTY) { 453 desc->stat = PACKET_EMPTY; 454 pci_unmap_single(port->card->pdev, desc->address, 455 port->tx_skbs[i]->len, 456 PCI_DMA_TODEVICE); 457 dev_kfree_skb(port->tx_skbs[i]); 458 } 459 } 460 return 0; 461 } 462 463 464 465 static struct net_device_stats *wanxl_get_stats(struct net_device *dev) 466 { 467 struct port *port = dev_to_port(dev); 468 469 dev->stats.rx_over_errors = get_status(port)->rx_overruns; 470 dev->stats.rx_frame_errors = get_status(port)->rx_frame_errors; 471 dev->stats.rx_errors = dev->stats.rx_over_errors + 472 dev->stats.rx_frame_errors; 473 return &dev->stats; 474 } 475 476 477 478 static int wanxl_puts_command(struct card *card, u32 cmd) 479 { 480 unsigned long timeout = jiffies + 5 * HZ; 481 482 writel(cmd, card->plx + PLX_MAILBOX_1); 483 do { 484 if (readl(card->plx + PLX_MAILBOX_1) == 0) 485 return 0; 486 487 schedule(); 488 }while (time_after(timeout, jiffies)); 489 490 return -1; 491 } 492 493 494 495 static void wanxl_reset(struct card *card) 496 { 497 u32 old_value = readl(card->plx + PLX_CONTROL) & ~PLX_CTL_RESET; 498 499 writel(0x80, card->plx + PLX_MAILBOX_0); 500 writel(old_value | PLX_CTL_RESET, card->plx + PLX_CONTROL); 501 readl(card->plx + PLX_CONTROL); /* wait for posted write */ 502 udelay(1); 503 writel(old_value, card->plx + PLX_CONTROL); 504 readl(card->plx + PLX_CONTROL); /* wait for posted write */ 505 } 506 507 508 509 static void wanxl_pci_remove_one(struct pci_dev *pdev) 510 { 511 struct card *card = pci_get_drvdata(pdev); 512 int i; 513 514 for (i = 0; i < card->n_ports; i++) { 515 unregister_hdlc_device(card->ports[i].dev); 516 free_netdev(card->ports[i].dev); 517 } 518 519 /* unregister and free all host resources */ 520 if (card->irq) 521 free_irq(card->irq, card); 522 523 wanxl_reset(card); 524 525 for (i = 0; i < RX_QUEUE_LENGTH; i++) 526 if (card->rx_skbs[i]) { 527 pci_unmap_single(card->pdev, 528 card->status->rx_descs[i].address, 529 BUFFER_LENGTH, PCI_DMA_FROMDEVICE); 530 dev_kfree_skb(card->rx_skbs[i]); 531 } 532 533 if (card->plx) 534 iounmap(card->plx); 535 536 if (card->status) 537 pci_free_consistent(pdev, sizeof(struct card_status), 538 card->status, card->status_address); 539 540 pci_release_regions(pdev); 541 pci_disable_device(pdev); 542 kfree(card); 543 } 544 545 546 #include "wanxlfw.inc" 547 548 static const struct net_device_ops wanxl_ops = { 549 .ndo_open = wanxl_open, 550 .ndo_stop = wanxl_close, 551 .ndo_start_xmit = hdlc_start_xmit, 552 .ndo_do_ioctl = wanxl_ioctl, 553 .ndo_get_stats = wanxl_get_stats, 554 }; 555 556 static int wanxl_pci_init_one(struct pci_dev *pdev, 557 const struct pci_device_id *ent) 558 { 559 struct card *card; 560 u32 ramsize, stat; 561 unsigned long timeout; 562 u32 plx_phy; /* PLX PCI base address */ 563 u32 mem_phy; /* memory PCI base addr */ 564 u8 __iomem *mem; /* memory virtual base addr */ 565 int i, ports; 566 567 #ifndef MODULE 568 pr_info_once("%s\n", version); 569 #endif 570 571 i = pci_enable_device(pdev); 572 if (i) 573 return i; 574 575 /* QUICC can only access first 256 MB of host RAM directly, 576 but PLX9060 DMA does 32-bits for actual packet data transfers */ 577 578 /* FIXME when PCI/DMA subsystems are fixed. 579 We set both dma_mask and consistent_dma_mask to 28 bits 580 and pray pci_alloc_consistent() will use this info. It should 581 work on most platforms */ 582 if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(28)) || 583 pci_set_dma_mask(pdev, DMA_BIT_MASK(28))) { 584 pr_err("No usable DMA configuration\n"); 585 pci_disable_device(pdev); 586 return -EIO; 587 } 588 589 i = pci_request_regions(pdev, "wanXL"); 590 if (i) { 591 pci_disable_device(pdev); 592 return i; 593 } 594 595 switch (pdev->device) { 596 case PCI_DEVICE_ID_SBE_WANXL100: ports = 1; break; 597 case PCI_DEVICE_ID_SBE_WANXL200: ports = 2; break; 598 default: ports = 4; 599 } 600 601 card = kzalloc(struct_size(card, ports, ports), GFP_KERNEL); 602 if (card == NULL) { 603 pci_release_regions(pdev); 604 pci_disable_device(pdev); 605 return -ENOBUFS; 606 } 607 608 pci_set_drvdata(pdev, card); 609 card->pdev = pdev; 610 611 card->status = pci_alloc_consistent(pdev, 612 sizeof(struct card_status), 613 &card->status_address); 614 if (card->status == NULL) { 615 wanxl_pci_remove_one(pdev); 616 return -ENOBUFS; 617 } 618 619 #ifdef DEBUG_PCI 620 printk(KERN_DEBUG "wanXL %s: pci_alloc_consistent() returned memory" 621 " at 0x%LX\n", pci_name(pdev), 622 (unsigned long long)card->status_address); 623 #endif 624 625 /* FIXME when PCI/DMA subsystems are fixed. 626 We set both dma_mask and consistent_dma_mask back to 32 bits 627 to indicate the card can do 32-bit DMA addressing */ 628 if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) || 629 pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { 630 pr_err("No usable DMA configuration\n"); 631 wanxl_pci_remove_one(pdev); 632 return -EIO; 633 } 634 635 /* set up PLX mapping */ 636 plx_phy = pci_resource_start(pdev, 0); 637 638 card->plx = ioremap(plx_phy, 0x70); 639 if (!card->plx) { 640 pr_err("ioremap() failed\n"); 641 wanxl_pci_remove_one(pdev); 642 return -EFAULT; 643 } 644 645 #if RESET_WHILE_LOADING 646 wanxl_reset(card); 647 #endif 648 649 timeout = jiffies + 20 * HZ; 650 while ((stat = readl(card->plx + PLX_MAILBOX_0)) != 0) { 651 if (time_before(timeout, jiffies)) { 652 pr_warn("%s: timeout waiting for PUTS to complete\n", 653 pci_name(pdev)); 654 wanxl_pci_remove_one(pdev); 655 return -ENODEV; 656 } 657 658 switch(stat & 0xC0) { 659 case 0x00: /* hmm - PUTS completed with non-zero code? */ 660 case 0x80: /* PUTS still testing the hardware */ 661 break; 662 663 default: 664 pr_warn("%s: PUTS test 0x%X failed\n", 665 pci_name(pdev), stat & 0x30); 666 wanxl_pci_remove_one(pdev); 667 return -ENODEV; 668 } 669 670 schedule(); 671 } 672 673 /* get on-board memory size (PUTS detects no more than 4 MB) */ 674 ramsize = readl(card->plx + PLX_MAILBOX_2) & MBX2_MEMSZ_MASK; 675 676 /* set up on-board RAM mapping */ 677 mem_phy = pci_resource_start(pdev, 2); 678 679 680 /* sanity check the board's reported memory size */ 681 if (ramsize < BUFFERS_ADDR + 682 (TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports) { 683 pr_warn("%s: no enough on-board RAM (%u bytes detected, %u bytes required)\n", 684 pci_name(pdev), ramsize, 685 BUFFERS_ADDR + 686 (TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports); 687 wanxl_pci_remove_one(pdev); 688 return -ENODEV; 689 } 690 691 if (wanxl_puts_command(card, MBX1_CMD_BSWAP)) { 692 pr_warn("%s: unable to Set Byte Swap Mode\n", pci_name(pdev)); 693 wanxl_pci_remove_one(pdev); 694 return -ENODEV; 695 } 696 697 for (i = 0; i < RX_QUEUE_LENGTH; i++) { 698 struct sk_buff *skb = dev_alloc_skb(BUFFER_LENGTH); 699 card->rx_skbs[i] = skb; 700 if (skb) 701 card->status->rx_descs[i].address = 702 pci_map_single(card->pdev, skb->data, 703 BUFFER_LENGTH, 704 PCI_DMA_FROMDEVICE); 705 } 706 707 mem = ioremap(mem_phy, PDM_OFFSET + sizeof(firmware)); 708 if (!mem) { 709 pr_err("ioremap() failed\n"); 710 wanxl_pci_remove_one(pdev); 711 return -EFAULT; 712 } 713 714 for (i = 0; i < sizeof(firmware); i += 4) 715 writel(ntohl(*(__be32*)(firmware + i)), mem + PDM_OFFSET + i); 716 717 for (i = 0; i < ports; i++) 718 writel(card->status_address + 719 (void *)&card->status->port_status[i] - 720 (void *)card->status, mem + PDM_OFFSET + 4 + i * 4); 721 writel(card->status_address, mem + PDM_OFFSET + 20); 722 writel(PDM_OFFSET, mem); 723 iounmap(mem); 724 725 writel(0, card->plx + PLX_MAILBOX_5); 726 727 if (wanxl_puts_command(card, MBX1_CMD_ABORTJ)) { 728 pr_warn("%s: unable to Abort and Jump\n", pci_name(pdev)); 729 wanxl_pci_remove_one(pdev); 730 return -ENODEV; 731 } 732 733 timeout = jiffies + 5 * HZ; 734 do { 735 if ((stat = readl(card->plx + PLX_MAILBOX_5)) != 0) 736 break; 737 schedule(); 738 }while (time_after(timeout, jiffies)); 739 740 if (!stat) { 741 pr_warn("%s: timeout while initializing card firmware\n", 742 pci_name(pdev)); 743 wanxl_pci_remove_one(pdev); 744 return -ENODEV; 745 } 746 747 #if DETECT_RAM 748 ramsize = stat; 749 #endif 750 751 pr_info("%s: at 0x%X, %u KB of RAM at 0x%X, irq %u\n", 752 pci_name(pdev), plx_phy, ramsize / 1024, mem_phy, pdev->irq); 753 754 /* Allocate IRQ */ 755 if (request_irq(pdev->irq, wanxl_intr, IRQF_SHARED, "wanXL", card)) { 756 pr_warn("%s: could not allocate IRQ%i\n", 757 pci_name(pdev), pdev->irq); 758 wanxl_pci_remove_one(pdev); 759 return -EBUSY; 760 } 761 card->irq = pdev->irq; 762 763 for (i = 0; i < ports; i++) { 764 hdlc_device *hdlc; 765 struct port *port = &card->ports[i]; 766 struct net_device *dev = alloc_hdlcdev(port); 767 if (!dev) { 768 pr_err("%s: unable to allocate memory\n", 769 pci_name(pdev)); 770 wanxl_pci_remove_one(pdev); 771 return -ENOMEM; 772 } 773 774 port->dev = dev; 775 hdlc = dev_to_hdlc(dev); 776 spin_lock_init(&port->lock); 777 dev->tx_queue_len = 50; 778 dev->netdev_ops = &wanxl_ops; 779 hdlc->attach = wanxl_attach; 780 hdlc->xmit = wanxl_xmit; 781 port->card = card; 782 port->node = i; 783 get_status(port)->clocking = CLOCK_EXT; 784 if (register_hdlc_device(dev)) { 785 pr_err("%s: unable to register hdlc device\n", 786 pci_name(pdev)); 787 free_netdev(dev); 788 wanxl_pci_remove_one(pdev); 789 return -ENOBUFS; 790 } 791 card->n_ports++; 792 } 793 794 pr_info("%s: port", pci_name(pdev)); 795 for (i = 0; i < ports; i++) 796 pr_cont("%s #%i: %s", 797 i ? "," : "", i, card->ports[i].dev->name); 798 pr_cont("\n"); 799 800 for (i = 0; i < ports; i++) 801 wanxl_cable_intr(&card->ports[i]); /* get carrier status etc.*/ 802 803 return 0; 804 } 805 806 static const struct pci_device_id wanxl_pci_tbl[] = { 807 { PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL100, PCI_ANY_ID, 808 PCI_ANY_ID, 0, 0, 0 }, 809 { PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL200, PCI_ANY_ID, 810 PCI_ANY_ID, 0, 0, 0 }, 811 { PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL400, PCI_ANY_ID, 812 PCI_ANY_ID, 0, 0, 0 }, 813 { 0, } 814 }; 815 816 817 static struct pci_driver wanxl_pci_driver = { 818 .name = "wanXL", 819 .id_table = wanxl_pci_tbl, 820 .probe = wanxl_pci_init_one, 821 .remove = wanxl_pci_remove_one, 822 }; 823 824 825 static int __init wanxl_init_module(void) 826 { 827 #ifdef MODULE 828 pr_info("%s\n", version); 829 #endif 830 return pci_register_driver(&wanxl_pci_driver); 831 } 832 833 static void __exit wanxl_cleanup_module(void) 834 { 835 pci_unregister_driver(&wanxl_pci_driver); 836 } 837 838 839 MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>"); 840 MODULE_DESCRIPTION("SBE Inc. wanXL serial port driver"); 841 MODULE_LICENSE("GPL v2"); 842 MODULE_DEVICE_TABLE(pci, wanxl_pci_tbl); 843 844 module_init(wanxl_init_module); 845 module_exit(wanxl_cleanup_module); 846