1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * drivers/net/wan/slic_ds26522.c 4 * 5 * Copyright (C) 2016 Freescale Semiconductor, Inc. 6 * 7 * Author:Zhao Qiang<qiang.zhao@nxp.com> 8 */ 9 10 #include <linux/bitrev.h> 11 #include <linux/module.h> 12 #include <linux/device.h> 13 #include <linux/kernel.h> 14 #include <linux/sched.h> 15 #include <linux/kthread.h> 16 #include <linux/spi/spi.h> 17 #include <linux/wait.h> 18 #include <linux/param.h> 19 #include <linux/delay.h> 20 #include <linux/of.h> 21 #include <linux/of_address.h> 22 #include <linux/io.h> 23 #include "slic_ds26522.h" 24 25 #define SLIC_TRANS_LEN 1 26 #define SLIC_TWO_LEN 2 27 #define SLIC_THREE_LEN 3 28 29 static struct spi_device *g_spi; 30 31 MODULE_LICENSE("GPL"); 32 MODULE_AUTHOR("Zhao Qiang<B45475@freescale.com>"); 33 34 /* the read/write format of address is 35 * w/r|A13|A12|A11|A10|A9|A8|A7|A6|A5|A4|A3|A2|A1|A0|x 36 */ 37 static void slic_write(struct spi_device *spi, u16 addr, 38 u8 data) 39 { 40 u8 temp[3]; 41 42 addr = bitrev16(addr) >> 1; 43 data = bitrev8(data); 44 temp[0] = (u8)((addr >> 8) & 0x7f); 45 temp[1] = (u8)(addr & 0xfe); 46 temp[2] = data; 47 48 /* write spi addr and value */ 49 spi_write(spi, &temp[0], SLIC_THREE_LEN); 50 } 51 52 static u8 slic_read(struct spi_device *spi, u16 addr) 53 { 54 u8 temp[2]; 55 u8 data; 56 57 addr = bitrev16(addr) >> 1; 58 temp[0] = (u8)(((addr >> 8) & 0x7f) | 0x80); 59 temp[1] = (u8)(addr & 0xfe); 60 61 spi_write_then_read(spi, &temp[0], SLIC_TWO_LEN, &data, 62 SLIC_TRANS_LEN); 63 64 data = bitrev8(data); 65 return data; 66 } 67 68 static bool get_slic_product_code(struct spi_device *spi) 69 { 70 u8 device_id; 71 72 device_id = slic_read(spi, DS26522_IDR_ADDR); 73 if ((device_id & 0xf8) == 0x68) 74 return true; 75 else 76 return false; 77 } 78 79 static void ds26522_e1_spec_config(struct spi_device *spi) 80 { 81 /* Receive E1 Mode, Framer Disabled */ 82 slic_write(spi, DS26522_RMMR_ADDR, DS26522_RMMR_E1); 83 84 /* Transmit E1 Mode, Framer Disable */ 85 slic_write(spi, DS26522_TMMR_ADDR, DS26522_TMMR_E1); 86 87 /* Receive E1 Mode Framer Enable */ 88 slic_write(spi, DS26522_RMMR_ADDR, 89 slic_read(spi, DS26522_RMMR_ADDR) | DS26522_RMMR_FRM_EN); 90 91 /* Transmit E1 Mode Framer Enable */ 92 slic_write(spi, DS26522_TMMR_ADDR, 93 slic_read(spi, DS26522_TMMR_ADDR) | DS26522_TMMR_FRM_EN); 94 95 /* RCR1, receive E1 B8zs & ESF */ 96 slic_write(spi, DS26522_RCR1_ADDR, 97 DS26522_RCR1_E1_HDB3 | DS26522_RCR1_E1_CCS); 98 99 /* RSYSCLK=2.048MHz, RSYNC-Output */ 100 slic_write(spi, DS26522_RIOCR_ADDR, 101 DS26522_RIOCR_2048KHZ | DS26522_RIOCR_RSIO_OUT); 102 103 /* TCR1 Transmit E1 b8zs */ 104 slic_write(spi, DS26522_TCR1_ADDR, DS26522_TCR1_TB8ZS); 105 106 /* TSYSCLK=2.048MHz, TSYNC-Output */ 107 slic_write(spi, DS26522_TIOCR_ADDR, 108 DS26522_TIOCR_2048KHZ | DS26522_TIOCR_TSIO_OUT); 109 110 /* Set E1TAF */ 111 slic_write(spi, DS26522_E1TAF_ADDR, DS26522_E1TAF_DEFAULT); 112 113 /* Set E1TNAF register */ 114 slic_write(spi, DS26522_E1TNAF_ADDR, DS26522_E1TNAF_DEFAULT); 115 116 /* Receive E1 Mode Framer Enable & init Done */ 117 slic_write(spi, DS26522_RMMR_ADDR, slic_read(spi, DS26522_RMMR_ADDR) | 118 DS26522_RMMR_INIT_DONE); 119 120 /* Transmit E1 Mode Framer Enable & init Done */ 121 slic_write(spi, DS26522_TMMR_ADDR, slic_read(spi, DS26522_TMMR_ADDR) | 122 DS26522_TMMR_INIT_DONE); 123 124 /* Configure LIU E1 mode */ 125 slic_write(spi, DS26522_LTRCR_ADDR, DS26522_LTRCR_E1); 126 127 /* E1 Mode default 75 ohm w/Transmit Impedance Matlinking */ 128 slic_write(spi, DS26522_LTITSR_ADDR, 129 DS26522_LTITSR_TLIS_75OHM | DS26522_LTITSR_LBOS_75OHM); 130 131 /* E1 Mode default 75 ohm Long Haul w/Receive Impedance Matlinking */ 132 slic_write(spi, DS26522_LRISMR_ADDR, 133 DS26522_LRISMR_75OHM | DS26522_LRISMR_MAX); 134 135 /* Enable Transmit output */ 136 slic_write(spi, DS26522_LMCR_ADDR, DS26522_LMCR_TE); 137 } 138 139 static int slic_ds26522_init_configure(struct spi_device *spi) 140 { 141 u16 addr; 142 143 /* set clock */ 144 slic_write(spi, DS26522_GTCCR_ADDR, DS26522_GTCCR_BPREFSEL_REFCLKIN | 145 DS26522_GTCCR_BFREQSEL_2048KHZ | 146 DS26522_GTCCR_FREQSEL_2048KHZ); 147 slic_write(spi, DS26522_GTCR2_ADDR, DS26522_GTCR2_TSSYNCOUT); 148 slic_write(spi, DS26522_GFCR_ADDR, DS26522_GFCR_BPCLK_2048KHZ); 149 150 /* set gtcr */ 151 slic_write(spi, DS26522_GTCR1_ADDR, DS26522_GTCR1); 152 153 /* Global LIU Software Reset Register */ 154 slic_write(spi, DS26522_GLSRR_ADDR, DS26522_GLSRR_RESET); 155 156 /* Global Framer and BERT Software Reset Register */ 157 slic_write(spi, DS26522_GFSRR_ADDR, DS26522_GFSRR_RESET); 158 159 usleep_range(100, 120); 160 161 slic_write(spi, DS26522_GLSRR_ADDR, DS26522_GLSRR_NORMAL); 162 slic_write(spi, DS26522_GFSRR_ADDR, DS26522_GFSRR_NORMAL); 163 164 /* Perform RX/TX SRESET,Reset receiver */ 165 slic_write(spi, DS26522_RMMR_ADDR, DS26522_RMMR_SFTRST); 166 167 /* Reset tranceiver */ 168 slic_write(spi, DS26522_TMMR_ADDR, DS26522_TMMR_SFTRST); 169 170 usleep_range(100, 120); 171 172 /* Zero all Framer Registers */ 173 for (addr = DS26522_RF_ADDR_START; addr <= DS26522_RF_ADDR_END; 174 addr++) 175 slic_write(spi, addr, 0); 176 177 for (addr = DS26522_TF_ADDR_START; addr <= DS26522_TF_ADDR_END; 178 addr++) 179 slic_write(spi, addr, 0); 180 181 for (addr = DS26522_LIU_ADDR_START; addr <= DS26522_LIU_ADDR_END; 182 addr++) 183 slic_write(spi, addr, 0); 184 185 for (addr = DS26522_BERT_ADDR_START; addr <= DS26522_BERT_ADDR_END; 186 addr++) 187 slic_write(spi, addr, 0); 188 189 /* setup ds26522 for E1 specification */ 190 ds26522_e1_spec_config(spi); 191 192 slic_write(spi, DS26522_GTCR1_ADDR, 0x00); 193 194 return 0; 195 } 196 197 static int slic_ds26522_remove(struct spi_device *spi) 198 { 199 pr_info("DS26522 module uninstalled\n"); 200 return 0; 201 } 202 203 static int slic_ds26522_probe(struct spi_device *spi) 204 { 205 int ret = 0; 206 207 g_spi = spi; 208 spi->bits_per_word = 8; 209 210 if (!get_slic_product_code(spi)) 211 return ret; 212 213 ret = slic_ds26522_init_configure(spi); 214 if (ret == 0) 215 pr_info("DS26522 cs%d configured\n", spi->chip_select); 216 217 return ret; 218 } 219 220 static const struct spi_device_id slic_ds26522_id[] = { 221 { .name = "ds26522" }, 222 { /* sentinel */ }, 223 }; 224 MODULE_DEVICE_TABLE(spi, slic_ds26522_id); 225 226 static const struct of_device_id slic_ds26522_match[] = { 227 { 228 .compatible = "maxim,ds26522", 229 }, 230 {}, 231 }; 232 MODULE_DEVICE_TABLE(of, slic_ds26522_match); 233 234 static struct spi_driver slic_ds26522_driver = { 235 .driver = { 236 .name = "ds26522", 237 .bus = &spi_bus_type, 238 .of_match_table = slic_ds26522_match, 239 }, 240 .probe = slic_ds26522_probe, 241 .remove = slic_ds26522_remove, 242 .id_table = slic_ds26522_id, 243 }; 244 245 module_spi_driver(slic_ds26522_driver); 246