1 /* 2 * Goramo PCI200SYN synchronous serial card driver for Linux 3 * 4 * Copyright (C) 2002-2008 Krzysztof Halasa <khc@pm.waw.pl> 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of version 2 of the GNU General Public License 8 * as published by the Free Software Foundation. 9 * 10 * For information see <http://www.kernel.org/pub/linux/utils/net/hdlc/> 11 * 12 * Sources of information: 13 * Hitachi HD64572 SCA-II User's Manual 14 * PLX Technology Inc. PCI9052 Data Book 15 */ 16 17 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 18 19 #include <linux/module.h> 20 #include <linux/kernel.h> 21 #include <linux/capability.h> 22 #include <linux/slab.h> 23 #include <linux/types.h> 24 #include <linux/fcntl.h> 25 #include <linux/in.h> 26 #include <linux/string.h> 27 #include <linux/errno.h> 28 #include <linux/init.h> 29 #include <linux/ioport.h> 30 #include <linux/moduleparam.h> 31 #include <linux/netdevice.h> 32 #include <linux/hdlc.h> 33 #include <linux/pci.h> 34 #include <linux/delay.h> 35 #include <asm/io.h> 36 37 #include "hd64572.h" 38 39 #undef DEBUG_PKT 40 #define DEBUG_RINGS 41 42 #define PCI200SYN_PLX_SIZE 0x80 /* PLX control window size (128b) */ 43 #define PCI200SYN_SCA_SIZE 0x400 /* SCA window size (1Kb) */ 44 #define MAX_TX_BUFFERS 10 45 46 static int pci_clock_freq = 33000000; 47 #define CLOCK_BASE pci_clock_freq 48 49 /* 50 * PLX PCI9052 local configuration and shared runtime registers. 51 * This structure can be used to access 9052 registers (memory mapped). 52 */ 53 typedef struct { 54 u32 loc_addr_range[4]; /* 00-0Ch : Local Address Ranges */ 55 u32 loc_rom_range; /* 10h : Local ROM Range */ 56 u32 loc_addr_base[4]; /* 14-20h : Local Address Base Addrs */ 57 u32 loc_rom_base; /* 24h : Local ROM Base */ 58 u32 loc_bus_descr[4]; /* 28-34h : Local Bus Descriptors */ 59 u32 rom_bus_descr; /* 38h : ROM Bus Descriptor */ 60 u32 cs_base[4]; /* 3C-48h : Chip Select Base Addrs */ 61 u32 intr_ctrl_stat; /* 4Ch : Interrupt Control/Status */ 62 u32 init_ctrl; /* 50h : EEPROM ctrl, Init Ctrl, etc */ 63 }plx9052; 64 65 66 67 typedef struct port_s { 68 struct napi_struct napi; 69 struct net_device *netdev; 70 struct card_s *card; 71 spinlock_t lock; /* TX lock */ 72 sync_serial_settings settings; 73 int rxpart; /* partial frame received, next frame invalid*/ 74 unsigned short encoding; 75 unsigned short parity; 76 u16 rxin; /* rx ring buffer 'in' pointer */ 77 u16 txin; /* tx ring buffer 'in' and 'last' pointers */ 78 u16 txlast; 79 u8 rxs, txs, tmc; /* SCA registers */ 80 u8 chan; /* physical port # - 0 or 1 */ 81 }port_t; 82 83 84 85 typedef struct card_s { 86 u8 __iomem *rambase; /* buffer memory base (virtual) */ 87 u8 __iomem *scabase; /* SCA memory base (virtual) */ 88 plx9052 __iomem *plxbase;/* PLX registers memory base (virtual) */ 89 u16 rx_ring_buffers; /* number of buffers in a ring */ 90 u16 tx_ring_buffers; 91 u16 buff_offset; /* offset of first buffer of first channel */ 92 u8 irq; /* interrupt request level */ 93 94 port_t ports[2]; 95 }card_t; 96 97 98 #define get_port(card, port) (&card->ports[port]) 99 #define sca_flush(card) (sca_in(IER0, card)); 100 101 static inline void new_memcpy_toio(char __iomem *dest, char *src, int length) 102 { 103 int len; 104 do { 105 len = length > 256 ? 256 : length; 106 memcpy_toio(dest, src, len); 107 dest += len; 108 src += len; 109 length -= len; 110 readb(dest); 111 } while (len); 112 } 113 114 #undef memcpy_toio 115 #define memcpy_toio new_memcpy_toio 116 117 #include "hd64572.c" 118 119 120 static void pci200_set_iface(port_t *port) 121 { 122 card_t *card = port->card; 123 u16 msci = get_msci(port); 124 u8 rxs = port->rxs & CLK_BRG_MASK; 125 u8 txs = port->txs & CLK_BRG_MASK; 126 127 sca_out(EXS_TES1, (port->chan ? MSCI1_OFFSET : MSCI0_OFFSET) + EXS, 128 port->card); 129 switch(port->settings.clock_type) { 130 case CLOCK_INT: 131 rxs |= CLK_BRG; /* BRG output */ 132 txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */ 133 break; 134 135 case CLOCK_TXINT: 136 rxs |= CLK_LINE; /* RXC input */ 137 txs |= CLK_PIN_OUT | CLK_BRG; /* BRG output */ 138 break; 139 140 case CLOCK_TXFROMRX: 141 rxs |= CLK_LINE; /* RXC input */ 142 txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */ 143 break; 144 145 default: /* EXTernal clock */ 146 rxs |= CLK_LINE; /* RXC input */ 147 txs |= CLK_PIN_OUT | CLK_LINE; /* TXC input */ 148 break; 149 } 150 151 port->rxs = rxs; 152 port->txs = txs; 153 sca_out(rxs, msci + RXS, card); 154 sca_out(txs, msci + TXS, card); 155 sca_set_port(port); 156 } 157 158 159 160 static int pci200_open(struct net_device *dev) 161 { 162 port_t *port = dev_to_port(dev); 163 164 int result = hdlc_open(dev); 165 if (result) 166 return result; 167 168 sca_open(dev); 169 pci200_set_iface(port); 170 sca_flush(port->card); 171 return 0; 172 } 173 174 175 176 static int pci200_close(struct net_device *dev) 177 { 178 sca_close(dev); 179 sca_flush(dev_to_port(dev)->card); 180 hdlc_close(dev); 181 return 0; 182 } 183 184 185 186 static int pci200_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) 187 { 188 const size_t size = sizeof(sync_serial_settings); 189 sync_serial_settings new_line; 190 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; 191 port_t *port = dev_to_port(dev); 192 193 #ifdef DEBUG_RINGS 194 if (cmd == SIOCDEVPRIVATE) { 195 sca_dump_rings(dev); 196 return 0; 197 } 198 #endif 199 if (cmd != SIOCWANDEV) 200 return hdlc_ioctl(dev, ifr, cmd); 201 202 switch(ifr->ifr_settings.type) { 203 case IF_GET_IFACE: 204 ifr->ifr_settings.type = IF_IFACE_V35; 205 if (ifr->ifr_settings.size < size) { 206 ifr->ifr_settings.size = size; /* data size wanted */ 207 return -ENOBUFS; 208 } 209 if (copy_to_user(line, &port->settings, size)) 210 return -EFAULT; 211 return 0; 212 213 case IF_IFACE_V35: 214 case IF_IFACE_SYNC_SERIAL: 215 if (!capable(CAP_NET_ADMIN)) 216 return -EPERM; 217 218 if (copy_from_user(&new_line, line, size)) 219 return -EFAULT; 220 221 if (new_line.clock_type != CLOCK_EXT && 222 new_line.clock_type != CLOCK_TXFROMRX && 223 new_line.clock_type != CLOCK_INT && 224 new_line.clock_type != CLOCK_TXINT) 225 return -EINVAL; /* No such clock setting */ 226 227 if (new_line.loopback != 0 && new_line.loopback != 1) 228 return -EINVAL; 229 230 memcpy(&port->settings, &new_line, size); /* Update settings */ 231 pci200_set_iface(port); 232 sca_flush(port->card); 233 return 0; 234 235 default: 236 return hdlc_ioctl(dev, ifr, cmd); 237 } 238 } 239 240 241 242 static void pci200_pci_remove_one(struct pci_dev *pdev) 243 { 244 int i; 245 card_t *card = pci_get_drvdata(pdev); 246 247 for (i = 0; i < 2; i++) 248 if (card->ports[i].card) 249 unregister_hdlc_device(card->ports[i].netdev); 250 251 if (card->irq) 252 free_irq(card->irq, card); 253 254 if (card->rambase) 255 iounmap(card->rambase); 256 if (card->scabase) 257 iounmap(card->scabase); 258 if (card->plxbase) 259 iounmap(card->plxbase); 260 261 pci_release_regions(pdev); 262 pci_disable_device(pdev); 263 pci_set_drvdata(pdev, NULL); 264 if (card->ports[0].netdev) 265 free_netdev(card->ports[0].netdev); 266 if (card->ports[1].netdev) 267 free_netdev(card->ports[1].netdev); 268 kfree(card); 269 } 270 271 static const struct net_device_ops pci200_ops = { 272 .ndo_open = pci200_open, 273 .ndo_stop = pci200_close, 274 .ndo_change_mtu = hdlc_change_mtu, 275 .ndo_start_xmit = hdlc_start_xmit, 276 .ndo_do_ioctl = pci200_ioctl, 277 }; 278 279 static int __devinit pci200_pci_init_one(struct pci_dev *pdev, 280 const struct pci_device_id *ent) 281 { 282 card_t *card; 283 u32 __iomem *p; 284 int i; 285 u32 ramsize; 286 u32 ramphys; /* buffer memory base */ 287 u32 scaphys; /* SCA memory base */ 288 u32 plxphys; /* PLX registers memory base */ 289 290 i = pci_enable_device(pdev); 291 if (i) 292 return i; 293 294 i = pci_request_regions(pdev, "PCI200SYN"); 295 if (i) { 296 pci_disable_device(pdev); 297 return i; 298 } 299 300 card = kzalloc(sizeof(card_t), GFP_KERNEL); 301 if (card == NULL) { 302 pr_err("unable to allocate memory\n"); 303 pci_release_regions(pdev); 304 pci_disable_device(pdev); 305 return -ENOBUFS; 306 } 307 pci_set_drvdata(pdev, card); 308 card->ports[0].netdev = alloc_hdlcdev(&card->ports[0]); 309 card->ports[1].netdev = alloc_hdlcdev(&card->ports[1]); 310 if (!card->ports[0].netdev || !card->ports[1].netdev) { 311 pr_err("unable to allocate memory\n"); 312 pci200_pci_remove_one(pdev); 313 return -ENOMEM; 314 } 315 316 if (pci_resource_len(pdev, 0) != PCI200SYN_PLX_SIZE || 317 pci_resource_len(pdev, 2) != PCI200SYN_SCA_SIZE || 318 pci_resource_len(pdev, 3) < 16384) { 319 pr_err("invalid card EEPROM parameters\n"); 320 pci200_pci_remove_one(pdev); 321 return -EFAULT; 322 } 323 324 plxphys = pci_resource_start(pdev,0) & PCI_BASE_ADDRESS_MEM_MASK; 325 card->plxbase = ioremap(plxphys, PCI200SYN_PLX_SIZE); 326 327 scaphys = pci_resource_start(pdev,2) & PCI_BASE_ADDRESS_MEM_MASK; 328 card->scabase = ioremap(scaphys, PCI200SYN_SCA_SIZE); 329 330 ramphys = pci_resource_start(pdev,3) & PCI_BASE_ADDRESS_MEM_MASK; 331 card->rambase = pci_ioremap_bar(pdev, 3); 332 333 if (card->plxbase == NULL || 334 card->scabase == NULL || 335 card->rambase == NULL) { 336 pr_err("ioremap() failed\n"); 337 pci200_pci_remove_one(pdev); 338 return -EFAULT; 339 } 340 341 /* Reset PLX */ 342 p = &card->plxbase->init_ctrl; 343 writel(readl(p) | 0x40000000, p); 344 readl(p); /* Flush the write - do not use sca_flush */ 345 udelay(1); 346 347 writel(readl(p) & ~0x40000000, p); 348 readl(p); /* Flush the write - do not use sca_flush */ 349 udelay(1); 350 351 ramsize = sca_detect_ram(card, card->rambase, 352 pci_resource_len(pdev, 3)); 353 354 /* number of TX + RX buffers for one port - this is dual port card */ 355 i = ramsize / (2 * (sizeof(pkt_desc) + HDLC_MAX_MRU)); 356 card->tx_ring_buffers = min(i / 2, MAX_TX_BUFFERS); 357 card->rx_ring_buffers = i - card->tx_ring_buffers; 358 359 card->buff_offset = 2 * sizeof(pkt_desc) * (card->tx_ring_buffers + 360 card->rx_ring_buffers); 361 362 pr_info("%u KB RAM at 0x%x, IRQ%u, using %u TX + %u RX packets rings\n", 363 ramsize / 1024, ramphys, 364 pdev->irq, card->tx_ring_buffers, card->rx_ring_buffers); 365 366 if (card->tx_ring_buffers < 1) { 367 pr_err("RAM test failed\n"); 368 pci200_pci_remove_one(pdev); 369 return -EFAULT; 370 } 371 372 /* Enable interrupts on the PCI bridge */ 373 p = &card->plxbase->intr_ctrl_stat; 374 writew(readw(p) | 0x0040, p); 375 376 /* Allocate IRQ */ 377 if (request_irq(pdev->irq, sca_intr, IRQF_SHARED, "pci200syn", card)) { 378 pr_warn("could not allocate IRQ%d\n", pdev->irq); 379 pci200_pci_remove_one(pdev); 380 return -EBUSY; 381 } 382 card->irq = pdev->irq; 383 384 sca_init(card, 0); 385 386 for (i = 0; i < 2; i++) { 387 port_t *port = &card->ports[i]; 388 struct net_device *dev = port->netdev; 389 hdlc_device *hdlc = dev_to_hdlc(dev); 390 port->chan = i; 391 392 spin_lock_init(&port->lock); 393 dev->irq = card->irq; 394 dev->mem_start = ramphys; 395 dev->mem_end = ramphys + ramsize - 1; 396 dev->tx_queue_len = 50; 397 dev->netdev_ops = &pci200_ops; 398 hdlc->attach = sca_attach; 399 hdlc->xmit = sca_xmit; 400 port->settings.clock_type = CLOCK_EXT; 401 port->card = card; 402 sca_init_port(port); 403 if (register_hdlc_device(dev)) { 404 pr_err("unable to register hdlc device\n"); 405 port->card = NULL; 406 pci200_pci_remove_one(pdev); 407 return -ENOBUFS; 408 } 409 410 netdev_info(dev, "PCI200SYN channel %d\n", port->chan); 411 } 412 413 sca_flush(card); 414 return 0; 415 } 416 417 418 419 static DEFINE_PCI_DEVICE_TABLE(pci200_pci_tbl) = { 420 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_PLX, 421 PCI_DEVICE_ID_PLX_PCI200SYN, 0, 0, 0 }, 422 { 0, } 423 }; 424 425 426 static struct pci_driver pci200_pci_driver = { 427 .name = "PCI200SYN", 428 .id_table = pci200_pci_tbl, 429 .probe = pci200_pci_init_one, 430 .remove = pci200_pci_remove_one, 431 }; 432 433 434 static int __init pci200_init_module(void) 435 { 436 if (pci_clock_freq < 1000000 || pci_clock_freq > 80000000) { 437 pr_err("Invalid PCI clock frequency\n"); 438 return -EINVAL; 439 } 440 return pci_register_driver(&pci200_pci_driver); 441 } 442 443 444 445 static void __exit pci200_cleanup_module(void) 446 { 447 pci_unregister_driver(&pci200_pci_driver); 448 } 449 450 MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>"); 451 MODULE_DESCRIPTION("Goramo PCI200SYN serial port driver"); 452 MODULE_LICENSE("GPL v2"); 453 MODULE_DEVICE_TABLE(pci, pci200_pci_tbl); 454 module_param(pci_clock_freq, int, 0444); 455 MODULE_PARM_DESC(pci_clock_freq, "System PCI clock frequency in Hz"); 456 module_init(pci200_init_module); 457 module_exit(pci200_cleanup_module); 458