1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Intel IXP4xx HSS (synchronous serial port) driver for Linux 4 * 5 * Copyright (C) 2007-2008 Krzysztof Hałasa <khc@pm.waw.pl> 6 */ 7 8 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 9 10 #include <linux/module.h> 11 #include <linux/bitops.h> 12 #include <linux/cdev.h> 13 #include <linux/dma-mapping.h> 14 #include <linux/dmapool.h> 15 #include <linux/fs.h> 16 #include <linux/hdlc.h> 17 #include <linux/io.h> 18 #include <linux/kernel.h> 19 #include <linux/mfd/syscon.h> 20 #include <linux/platform_device.h> 21 #include <linux/poll.h> 22 #include <linux/regmap.h> 23 #include <linux/slab.h> 24 #include <linux/gpio/consumer.h> 25 #include <linux/of.h> 26 #include <linux/soc/ixp4xx/npe.h> 27 #include <linux/soc/ixp4xx/qmgr.h> 28 #include <linux/soc/ixp4xx/cpu.h> 29 30 /* This is what all IXP4xx platforms we know uses, if more frequencies 31 * are needed, we need to migrate to the clock framework. 32 */ 33 #define IXP4XX_TIMER_FREQ 66666000 34 35 #define DEBUG_DESC 0 36 #define DEBUG_RX 0 37 #define DEBUG_TX 0 38 #define DEBUG_PKT_BYTES 0 39 #define DEBUG_CLOSE 0 40 41 #define DRV_NAME "ixp4xx_hss" 42 43 #define PKT_EXTRA_FLAGS 0 /* orig 1 */ 44 #define PKT_NUM_PIPES 1 /* 1, 2 or 4 */ 45 #define PKT_PIPE_FIFO_SIZEW 4 /* total 4 dwords per HSS */ 46 47 #define RX_DESCS 16 /* also length of all RX queues */ 48 #define TX_DESCS 16 /* also length of all TX queues */ 49 50 #define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS)) 51 #define RX_SIZE (HDLC_MAX_MRU + 4) /* NPE needs more space */ 52 #define MAX_CLOSE_WAIT 1000 /* microseconds */ 53 #define HSS_COUNT 2 54 #define FRAME_SIZE 256 /* doesn't matter at this point */ 55 #define FRAME_OFFSET 0 56 #define MAX_CHANNELS (FRAME_SIZE / 8) 57 58 #define NAPI_WEIGHT 16 59 60 /* Queue IDs */ 61 #define HSS0_PKT_RX_QUEUE 13 /* orig size = 32 dwords */ 62 #define HSS0_PKT_TX0_QUEUE 14 /* orig size = 16 dwords */ 63 #define HSS0_PKT_TX1_QUEUE 15 64 #define HSS0_PKT_TX2_QUEUE 16 65 #define HSS0_PKT_TX3_QUEUE 17 66 #define HSS0_PKT_RXFREE0_QUEUE 18 /* orig size = 16 dwords */ 67 #define HSS0_PKT_RXFREE1_QUEUE 19 68 #define HSS0_PKT_RXFREE2_QUEUE 20 69 #define HSS0_PKT_RXFREE3_QUEUE 21 70 #define HSS0_PKT_TXDONE_QUEUE 22 /* orig size = 64 dwords */ 71 72 #define HSS1_PKT_RX_QUEUE 0 73 #define HSS1_PKT_TX0_QUEUE 5 74 #define HSS1_PKT_TX1_QUEUE 6 75 #define HSS1_PKT_TX2_QUEUE 7 76 #define HSS1_PKT_TX3_QUEUE 8 77 #define HSS1_PKT_RXFREE0_QUEUE 1 78 #define HSS1_PKT_RXFREE1_QUEUE 2 79 #define HSS1_PKT_RXFREE2_QUEUE 3 80 #define HSS1_PKT_RXFREE3_QUEUE 4 81 #define HSS1_PKT_TXDONE_QUEUE 9 82 83 #define NPE_PKT_MODE_HDLC 0 84 #define NPE_PKT_MODE_RAW 1 85 #define NPE_PKT_MODE_56KMODE 2 86 #define NPE_PKT_MODE_56KENDIAN_MSB 4 87 88 /* PKT_PIPE_HDLC_CFG_WRITE flags */ 89 #define PKT_HDLC_IDLE_ONES 0x1 /* default = flags */ 90 #define PKT_HDLC_CRC_32 0x2 /* default = CRC-16 */ 91 #define PKT_HDLC_MSB_ENDIAN 0x4 /* default = LE */ 92 93 /* hss_config, PCRs */ 94 /* Frame sync sampling, default = active low */ 95 #define PCR_FRM_SYNC_ACTIVE_HIGH 0x40000000 96 #define PCR_FRM_SYNC_FALLINGEDGE 0x80000000 97 #define PCR_FRM_SYNC_RISINGEDGE 0xC0000000 98 99 /* Frame sync pin: input (default) or output generated off a given clk edge */ 100 #define PCR_FRM_SYNC_OUTPUT_FALLING 0x20000000 101 #define PCR_FRM_SYNC_OUTPUT_RISING 0x30000000 102 103 /* Frame and data clock sampling on edge, default = falling */ 104 #define PCR_FCLK_EDGE_RISING 0x08000000 105 #define PCR_DCLK_EDGE_RISING 0x04000000 106 107 /* Clock direction, default = input */ 108 #define PCR_SYNC_CLK_DIR_OUTPUT 0x02000000 109 110 /* Generate/Receive frame pulses, default = enabled */ 111 #define PCR_FRM_PULSE_DISABLED 0x01000000 112 113 /* Data rate is full (default) or half the configured clk speed */ 114 #define PCR_HALF_CLK_RATE 0x00200000 115 116 /* Invert data between NPE and HSS FIFOs? (default = no) */ 117 #define PCR_DATA_POLARITY_INVERT 0x00100000 118 119 /* TX/RX endianness, default = LSB */ 120 #define PCR_MSB_ENDIAN 0x00080000 121 122 /* Normal (default) / open drain mode (TX only) */ 123 #define PCR_TX_PINS_OPEN_DRAIN 0x00040000 124 125 /* No framing bit transmitted and expected on RX? (default = framing bit) */ 126 #define PCR_SOF_NO_FBIT 0x00020000 127 128 /* Drive data pins? */ 129 #define PCR_TX_DATA_ENABLE 0x00010000 130 131 /* Voice 56k type: drive the data pins low (default), high, high Z */ 132 #define PCR_TX_V56K_HIGH 0x00002000 133 #define PCR_TX_V56K_HIGH_IMP 0x00004000 134 135 /* Unassigned type: drive the data pins low (default), high, high Z */ 136 #define PCR_TX_UNASS_HIGH 0x00000800 137 #define PCR_TX_UNASS_HIGH_IMP 0x00001000 138 139 /* T1 @ 1.544MHz only: Fbit dictated in FIFO (default) or high Z */ 140 #define PCR_TX_FB_HIGH_IMP 0x00000400 141 142 /* 56k data endiannes - which bit unused: high (default) or low */ 143 #define PCR_TX_56KE_BIT_0_UNUSED 0x00000200 144 145 /* 56k data transmission type: 32/8 bit data (default) or 56K data */ 146 #define PCR_TX_56KS_56K_DATA 0x00000100 147 148 /* hss_config, cCR */ 149 /* Number of packetized clients, default = 1 */ 150 #define CCR_NPE_HFIFO_2_HDLC 0x04000000 151 #define CCR_NPE_HFIFO_3_OR_4HDLC 0x08000000 152 153 /* default = no loopback */ 154 #define CCR_LOOPBACK 0x02000000 155 156 /* HSS number, default = 0 (first) */ 157 #define CCR_SECOND_HSS 0x01000000 158 159 /* hss_config, clkCR: main:10, num:10, denom:12 */ 160 #define CLK42X_SPEED_EXP ((0x3FF << 22) | (2 << 12) | 15) /*65 KHz*/ 161 162 #define CLK42X_SPEED_512KHZ ((130 << 22) | (2 << 12) | 15) 163 #define CLK42X_SPEED_1536KHZ ((43 << 22) | (18 << 12) | 47) 164 #define CLK42X_SPEED_1544KHZ ((43 << 22) | (33 << 12) | 192) 165 #define CLK42X_SPEED_2048KHZ ((32 << 22) | (34 << 12) | 63) 166 #define CLK42X_SPEED_4096KHZ ((16 << 22) | (34 << 12) | 127) 167 #define CLK42X_SPEED_8192KHZ ((8 << 22) | (34 << 12) | 255) 168 169 #define CLK46X_SPEED_512KHZ ((130 << 22) | (24 << 12) | 127) 170 #define CLK46X_SPEED_1536KHZ ((43 << 22) | (152 << 12) | 383) 171 #define CLK46X_SPEED_1544KHZ ((43 << 22) | (66 << 12) | 385) 172 #define CLK46X_SPEED_2048KHZ ((32 << 22) | (280 << 12) | 511) 173 #define CLK46X_SPEED_4096KHZ ((16 << 22) | (280 << 12) | 1023) 174 #define CLK46X_SPEED_8192KHZ ((8 << 22) | (280 << 12) | 2047) 175 176 /* HSS_CONFIG_CLOCK_CR register consists of 3 parts: 177 * A (10 bits), B (10 bits) and C (12 bits). 178 * IXP42x HSS clock generator operation (verified with an oscilloscope): 179 * Each clock bit takes 7.5 ns (1 / 133.xx MHz). 180 * The clock sequence consists of (C - B) states of 0s and 1s, each state is 181 * A bits wide. It's followed by (B + 1) states of 0s and 1s, each state is 182 * (A + 1) bits wide. 183 * 184 * The resulting average clock frequency (assuming 33.333 MHz oscillator) is: 185 * freq = 66.666 MHz / (A + (B + 1) / (C + 1)) 186 * minimum freq = 66.666 MHz / (A + 1) 187 * maximum freq = 66.666 MHz / A 188 * 189 * Example: A = 2, B = 2, C = 7, CLOCK_CR register = 2 << 22 | 2 << 12 | 7 190 * freq = 66.666 MHz / (2 + (2 + 1) / (7 + 1)) = 28.07 MHz (Mb/s). 191 * The clock sequence is: 1100110011 (5 doubles) 000111000 (3 triples). 192 * The sequence takes (C - B) * A + (B + 1) * (A + 1) = 5 * 2 + 3 * 3 bits 193 * = 19 bits (each 7.5 ns long) = 142.5 ns (then the sequence repeats). 194 * The sequence consists of 4 complete clock periods, thus the average 195 * frequency (= clock rate) is 4 / 142.5 ns = 28.07 MHz (Mb/s). 196 * (max specified clock rate for IXP42x HSS is 8.192 Mb/s). 197 */ 198 199 /* hss_config, LUT entries */ 200 #define TDMMAP_UNASSIGNED 0 201 #define TDMMAP_HDLC 1 /* HDLC - packetized */ 202 #define TDMMAP_VOICE56K 2 /* Voice56K - 7-bit channelized */ 203 #define TDMMAP_VOICE64K 3 /* Voice64K - 8-bit channelized */ 204 205 /* offsets into HSS config */ 206 #define HSS_CONFIG_TX_PCR 0x00 /* port configuration registers */ 207 #define HSS_CONFIG_RX_PCR 0x04 208 #define HSS_CONFIG_CORE_CR 0x08 /* loopback control, HSS# */ 209 #define HSS_CONFIG_CLOCK_CR 0x0C /* clock generator control */ 210 #define HSS_CONFIG_TX_FCR 0x10 /* frame configuration registers */ 211 #define HSS_CONFIG_RX_FCR 0x14 212 #define HSS_CONFIG_TX_LUT 0x18 /* channel look-up tables */ 213 #define HSS_CONFIG_RX_LUT 0x38 214 215 /* NPE command codes */ 216 /* writes the ConfigWord value to the location specified by offset */ 217 #define PORT_CONFIG_WRITE 0x40 218 219 /* triggers the NPE to load the contents of the configuration table */ 220 #define PORT_CONFIG_LOAD 0x41 221 222 /* triggers the NPE to return an HssErrorReadResponse message */ 223 #define PORT_ERROR_READ 0x42 224 225 /* triggers the NPE to reset internal status and enable the HssPacketized 226 * operation for the flow specified by pPipe 227 */ 228 #define PKT_PIPE_FLOW_ENABLE 0x50 229 #define PKT_PIPE_FLOW_DISABLE 0x51 230 #define PKT_NUM_PIPES_WRITE 0x52 231 #define PKT_PIPE_FIFO_SIZEW_WRITE 0x53 232 #define PKT_PIPE_HDLC_CFG_WRITE 0x54 233 #define PKT_PIPE_IDLE_PATTERN_WRITE 0x55 234 #define PKT_PIPE_RX_SIZE_WRITE 0x56 235 #define PKT_PIPE_MODE_WRITE 0x57 236 237 /* HDLC packet status values - desc->status */ 238 #define ERR_SHUTDOWN 1 /* stop or shutdown occurrence */ 239 #define ERR_HDLC_ALIGN 2 /* HDLC alignment error */ 240 #define ERR_HDLC_FCS 3 /* HDLC Frame Check Sum error */ 241 #define ERR_RXFREE_Q_EMPTY 4 /* RX-free queue became empty while receiving 242 * this packet (if buf_len < pkt_len) 243 */ 244 #define ERR_HDLC_TOO_LONG 5 /* HDLC frame size too long */ 245 #define ERR_HDLC_ABORT 6 /* abort sequence received */ 246 #define ERR_DISCONNECTING 7 /* disconnect is in progress */ 247 248 #ifdef __ARMEB__ 249 typedef struct sk_buff buffer_t; 250 #define free_buffer dev_kfree_skb 251 #define free_buffer_irq dev_consume_skb_irq 252 #else 253 typedef void buffer_t; 254 #define free_buffer kfree 255 #define free_buffer_irq kfree 256 #endif 257 258 struct port { 259 struct device *dev; 260 struct npe *npe; 261 unsigned int txreadyq; 262 unsigned int rxtrigq; 263 unsigned int rxfreeq; 264 unsigned int rxq; 265 unsigned int txq; 266 unsigned int txdoneq; 267 struct gpio_desc *cts; 268 struct gpio_desc *rts; 269 struct gpio_desc *dcd; 270 struct gpio_desc *dtr; 271 struct gpio_desc *clk_internal; 272 struct net_device *netdev; 273 struct napi_struct napi; 274 buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS]; 275 struct desc *desc_tab; /* coherent */ 276 dma_addr_t desc_tab_phys; 277 unsigned int id; 278 unsigned int clock_type, clock_rate, loopback; 279 unsigned int initialized, carrier; 280 u8 hdlc_cfg; 281 u32 clock_reg; 282 }; 283 284 /* NPE message structure */ 285 struct msg { 286 #ifdef __ARMEB__ 287 u8 cmd, unused, hss_port, index; 288 union { 289 struct { u8 data8a, data8b, data8c, data8d; }; 290 struct { u16 data16a, data16b; }; 291 struct { u32 data32; }; 292 }; 293 #else 294 u8 index, hss_port, unused, cmd; 295 union { 296 struct { u8 data8d, data8c, data8b, data8a; }; 297 struct { u16 data16b, data16a; }; 298 struct { u32 data32; }; 299 }; 300 #endif 301 }; 302 303 /* HDLC packet descriptor */ 304 struct desc { 305 u32 next; /* pointer to next buffer, unused */ 306 307 #ifdef __ARMEB__ 308 u16 buf_len; /* buffer length */ 309 u16 pkt_len; /* packet length */ 310 u32 data; /* pointer to data buffer in RAM */ 311 u8 status; 312 u8 error_count; 313 u16 __reserved; 314 #else 315 u16 pkt_len; /* packet length */ 316 u16 buf_len; /* buffer length */ 317 u32 data; /* pointer to data buffer in RAM */ 318 u16 __reserved; 319 u8 error_count; 320 u8 status; 321 #endif 322 u32 __reserved1[4]; 323 }; 324 325 #define rx_desc_phys(port, n) ((port)->desc_tab_phys + \ 326 (n) * sizeof(struct desc)) 327 #define rx_desc_ptr(port, n) (&(port)->desc_tab[n]) 328 329 #define tx_desc_phys(port, n) ((port)->desc_tab_phys + \ 330 ((n) + RX_DESCS) * sizeof(struct desc)) 331 #define tx_desc_ptr(port, n) (&(port)->desc_tab[(n) + RX_DESCS]) 332 333 /***************************************************************************** 334 * global variables 335 ****************************************************************************/ 336 337 static int ports_open; 338 static struct dma_pool *dma_pool; 339 static DEFINE_SPINLOCK(npe_lock); 340 341 /***************************************************************************** 342 * utility functions 343 ****************************************************************************/ 344 345 static inline struct port *dev_to_port(struct net_device *dev) 346 { 347 return dev_to_hdlc(dev)->priv; 348 } 349 350 #ifndef __ARMEB__ 351 static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt) 352 { 353 int i; 354 355 for (i = 0; i < cnt; i++) 356 dest[i] = swab32(src[i]); 357 } 358 #endif 359 360 /***************************************************************************** 361 * HSS access 362 ****************************************************************************/ 363 364 static void hss_npe_send(struct port *port, struct msg *msg, const char *what) 365 { 366 u32 *val = (u32 *)msg; 367 368 if (npe_send_message(port->npe, msg, what)) { 369 pr_crit("HSS-%i: unable to send command [%08X:%08X] to %s\n", 370 port->id, val[0], val[1], npe_name(port->npe)); 371 BUG(); 372 } 373 } 374 375 static void hss_config_set_lut(struct port *port) 376 { 377 struct msg msg; 378 int ch; 379 380 memset(&msg, 0, sizeof(msg)); 381 msg.cmd = PORT_CONFIG_WRITE; 382 msg.hss_port = port->id; 383 384 for (ch = 0; ch < MAX_CHANNELS; ch++) { 385 msg.data32 >>= 2; 386 msg.data32 |= TDMMAP_HDLC << 30; 387 388 if (ch % 16 == 15) { 389 msg.index = HSS_CONFIG_TX_LUT + ((ch / 4) & ~3); 390 hss_npe_send(port, &msg, "HSS_SET_TX_LUT"); 391 392 msg.index += HSS_CONFIG_RX_LUT - HSS_CONFIG_TX_LUT; 393 hss_npe_send(port, &msg, "HSS_SET_RX_LUT"); 394 } 395 } 396 } 397 398 static void hss_config(struct port *port) 399 { 400 struct msg msg; 401 402 memset(&msg, 0, sizeof(msg)); 403 msg.cmd = PORT_CONFIG_WRITE; 404 msg.hss_port = port->id; 405 msg.index = HSS_CONFIG_TX_PCR; 406 msg.data32 = PCR_FRM_PULSE_DISABLED | PCR_MSB_ENDIAN | 407 PCR_TX_DATA_ENABLE | PCR_SOF_NO_FBIT; 408 if (port->clock_type == CLOCK_INT) 409 msg.data32 |= PCR_SYNC_CLK_DIR_OUTPUT; 410 hss_npe_send(port, &msg, "HSS_SET_TX_PCR"); 411 412 msg.index = HSS_CONFIG_RX_PCR; 413 msg.data32 ^= PCR_TX_DATA_ENABLE | PCR_DCLK_EDGE_RISING; 414 hss_npe_send(port, &msg, "HSS_SET_RX_PCR"); 415 416 memset(&msg, 0, sizeof(msg)); 417 msg.cmd = PORT_CONFIG_WRITE; 418 msg.hss_port = port->id; 419 msg.index = HSS_CONFIG_CORE_CR; 420 msg.data32 = (port->loopback ? CCR_LOOPBACK : 0) | 421 (port->id ? CCR_SECOND_HSS : 0); 422 hss_npe_send(port, &msg, "HSS_SET_CORE_CR"); 423 424 memset(&msg, 0, sizeof(msg)); 425 msg.cmd = PORT_CONFIG_WRITE; 426 msg.hss_port = port->id; 427 msg.index = HSS_CONFIG_CLOCK_CR; 428 msg.data32 = port->clock_reg; 429 hss_npe_send(port, &msg, "HSS_SET_CLOCK_CR"); 430 431 memset(&msg, 0, sizeof(msg)); 432 msg.cmd = PORT_CONFIG_WRITE; 433 msg.hss_port = port->id; 434 msg.index = HSS_CONFIG_TX_FCR; 435 msg.data16a = FRAME_OFFSET; 436 msg.data16b = FRAME_SIZE - 1; 437 hss_npe_send(port, &msg, "HSS_SET_TX_FCR"); 438 439 memset(&msg, 0, sizeof(msg)); 440 msg.cmd = PORT_CONFIG_WRITE; 441 msg.hss_port = port->id; 442 msg.index = HSS_CONFIG_RX_FCR; 443 msg.data16a = FRAME_OFFSET; 444 msg.data16b = FRAME_SIZE - 1; 445 hss_npe_send(port, &msg, "HSS_SET_RX_FCR"); 446 447 hss_config_set_lut(port); 448 449 memset(&msg, 0, sizeof(msg)); 450 msg.cmd = PORT_CONFIG_LOAD; 451 msg.hss_port = port->id; 452 hss_npe_send(port, &msg, "HSS_LOAD_CONFIG"); 453 454 if (npe_recv_message(port->npe, &msg, "HSS_LOAD_CONFIG") || 455 /* HSS_LOAD_CONFIG for port #1 returns port_id = #4 */ 456 msg.cmd != PORT_CONFIG_LOAD || msg.data32) { 457 pr_crit("HSS-%i: HSS_LOAD_CONFIG failed\n", port->id); 458 BUG(); 459 } 460 461 /* HDLC may stop working without this - check FIXME */ 462 npe_recv_message(port->npe, &msg, "FLUSH_IT"); 463 } 464 465 static void hss_set_hdlc_cfg(struct port *port) 466 { 467 struct msg msg; 468 469 memset(&msg, 0, sizeof(msg)); 470 msg.cmd = PKT_PIPE_HDLC_CFG_WRITE; 471 msg.hss_port = port->id; 472 msg.data8a = port->hdlc_cfg; /* rx_cfg */ 473 msg.data8b = port->hdlc_cfg | (PKT_EXTRA_FLAGS << 3); /* tx_cfg */ 474 hss_npe_send(port, &msg, "HSS_SET_HDLC_CFG"); 475 } 476 477 static u32 hss_get_status(struct port *port) 478 { 479 struct msg msg; 480 481 memset(&msg, 0, sizeof(msg)); 482 msg.cmd = PORT_ERROR_READ; 483 msg.hss_port = port->id; 484 hss_npe_send(port, &msg, "PORT_ERROR_READ"); 485 if (npe_recv_message(port->npe, &msg, "PORT_ERROR_READ")) { 486 pr_crit("HSS-%i: unable to read HSS status\n", port->id); 487 BUG(); 488 } 489 490 return msg.data32; 491 } 492 493 static void hss_start_hdlc(struct port *port) 494 { 495 struct msg msg; 496 497 memset(&msg, 0, sizeof(msg)); 498 msg.cmd = PKT_PIPE_FLOW_ENABLE; 499 msg.hss_port = port->id; 500 msg.data32 = 0; 501 hss_npe_send(port, &msg, "HSS_ENABLE_PKT_PIPE"); 502 } 503 504 static void hss_stop_hdlc(struct port *port) 505 { 506 struct msg msg; 507 508 memset(&msg, 0, sizeof(msg)); 509 msg.cmd = PKT_PIPE_FLOW_DISABLE; 510 msg.hss_port = port->id; 511 hss_npe_send(port, &msg, "HSS_DISABLE_PKT_PIPE"); 512 hss_get_status(port); /* make sure it's halted */ 513 } 514 515 static int hss_load_firmware(struct port *port) 516 { 517 struct msg msg; 518 int err; 519 520 if (port->initialized) 521 return 0; 522 523 if (!npe_running(port->npe)) { 524 err = npe_load_firmware(port->npe, npe_name(port->npe), 525 port->dev); 526 if (err) 527 return err; 528 } 529 530 /* HDLC mode configuration */ 531 memset(&msg, 0, sizeof(msg)); 532 msg.cmd = PKT_NUM_PIPES_WRITE; 533 msg.hss_port = port->id; 534 msg.data8a = PKT_NUM_PIPES; 535 hss_npe_send(port, &msg, "HSS_SET_PKT_PIPES"); 536 537 msg.cmd = PKT_PIPE_FIFO_SIZEW_WRITE; 538 msg.data8a = PKT_PIPE_FIFO_SIZEW; 539 hss_npe_send(port, &msg, "HSS_SET_PKT_FIFO"); 540 541 msg.cmd = PKT_PIPE_MODE_WRITE; 542 msg.data8a = NPE_PKT_MODE_HDLC; 543 /* msg.data8b = inv_mask */ 544 /* msg.data8c = or_mask */ 545 hss_npe_send(port, &msg, "HSS_SET_PKT_MODE"); 546 547 msg.cmd = PKT_PIPE_RX_SIZE_WRITE; 548 msg.data16a = HDLC_MAX_MRU; /* including CRC */ 549 hss_npe_send(port, &msg, "HSS_SET_PKT_RX_SIZE"); 550 551 msg.cmd = PKT_PIPE_IDLE_PATTERN_WRITE; 552 msg.data32 = 0x7F7F7F7F; /* ??? FIXME */ 553 hss_npe_send(port, &msg, "HSS_SET_PKT_IDLE"); 554 555 port->initialized = 1; 556 return 0; 557 } 558 559 /***************************************************************************** 560 * packetized (HDLC) operation 561 ****************************************************************************/ 562 563 static inline void debug_pkt(struct net_device *dev, const char *func, 564 u8 *data, int len) 565 { 566 #if DEBUG_PKT_BYTES 567 int i; 568 569 printk(KERN_DEBUG "%s: %s(%i)", dev->name, func, len); 570 for (i = 0; i < len; i++) { 571 if (i >= DEBUG_PKT_BYTES) 572 break; 573 printk("%s%02X", !(i % 4) ? " " : "", data[i]); 574 } 575 printk("\n"); 576 #endif 577 } 578 579 static inline void debug_desc(u32 phys, struct desc *desc) 580 { 581 #if DEBUG_DESC 582 printk(KERN_DEBUG "%X: %X %3X %3X %08X %X %X\n", 583 phys, desc->next, desc->buf_len, desc->pkt_len, 584 desc->data, desc->status, desc->error_count); 585 #endif 586 } 587 588 static inline int queue_get_desc(unsigned int queue, struct port *port, 589 int is_tx) 590 { 591 u32 phys, tab_phys, n_desc; 592 struct desc *tab; 593 594 phys = qmgr_get_entry(queue); 595 if (!phys) 596 return -1; 597 598 BUG_ON(phys & 0x1F); 599 tab_phys = is_tx ? tx_desc_phys(port, 0) : rx_desc_phys(port, 0); 600 tab = is_tx ? tx_desc_ptr(port, 0) : rx_desc_ptr(port, 0); 601 n_desc = (phys - tab_phys) / sizeof(struct desc); 602 BUG_ON(n_desc >= (is_tx ? TX_DESCS : RX_DESCS)); 603 debug_desc(phys, &tab[n_desc]); 604 BUG_ON(tab[n_desc].next); 605 return n_desc; 606 } 607 608 static inline void queue_put_desc(unsigned int queue, u32 phys, 609 struct desc *desc) 610 { 611 debug_desc(phys, desc); 612 BUG_ON(phys & 0x1F); 613 qmgr_put_entry(queue, phys); 614 /* Don't check for queue overflow here, we've allocated sufficient 615 * length and queues >= 32 don't support this check anyway. 616 */ 617 } 618 619 static inline void dma_unmap_tx(struct port *port, struct desc *desc) 620 { 621 #ifdef __ARMEB__ 622 dma_unmap_single(&port->netdev->dev, desc->data, 623 desc->buf_len, DMA_TO_DEVICE); 624 #else 625 dma_unmap_single(&port->netdev->dev, desc->data & ~3, 626 ALIGN((desc->data & 3) + desc->buf_len, 4), 627 DMA_TO_DEVICE); 628 #endif 629 } 630 631 static void hss_hdlc_set_carrier(void *pdev, int carrier) 632 { 633 struct net_device *netdev = pdev; 634 struct port *port = dev_to_port(netdev); 635 unsigned long flags; 636 637 spin_lock_irqsave(&npe_lock, flags); 638 port->carrier = carrier; 639 if (!port->loopback) { 640 if (carrier) 641 netif_carrier_on(netdev); 642 else 643 netif_carrier_off(netdev); 644 } 645 spin_unlock_irqrestore(&npe_lock, flags); 646 } 647 648 static void hss_hdlc_rx_irq(void *pdev) 649 { 650 struct net_device *dev = pdev; 651 struct port *port = dev_to_port(dev); 652 653 #if DEBUG_RX 654 printk(KERN_DEBUG "%s: hss_hdlc_rx_irq\n", dev->name); 655 #endif 656 qmgr_disable_irq(port->rxq); 657 napi_schedule(&port->napi); 658 } 659 660 static int hss_hdlc_poll(struct napi_struct *napi, int budget) 661 { 662 struct port *port = container_of(napi, struct port, napi); 663 struct net_device *dev = port->netdev; 664 unsigned int rxq = port->rxq; 665 unsigned int rxfreeq = port->rxfreeq; 666 int received = 0; 667 668 #if DEBUG_RX 669 printk(KERN_DEBUG "%s: hss_hdlc_poll\n", dev->name); 670 #endif 671 672 while (received < budget) { 673 struct sk_buff *skb; 674 struct desc *desc; 675 int n; 676 #ifdef __ARMEB__ 677 struct sk_buff *temp; 678 u32 phys; 679 #endif 680 681 n = queue_get_desc(rxq, port, 0); 682 if (n < 0) { 683 #if DEBUG_RX 684 printk(KERN_DEBUG "%s: hss_hdlc_poll" 685 " napi_complete\n", dev->name); 686 #endif 687 napi_complete(napi); 688 qmgr_enable_irq(rxq); 689 if (!qmgr_stat_empty(rxq) && 690 napi_reschedule(napi)) { 691 #if DEBUG_RX 692 printk(KERN_DEBUG "%s: hss_hdlc_poll" 693 " napi_reschedule succeeded\n", 694 dev->name); 695 #endif 696 qmgr_disable_irq(rxq); 697 continue; 698 } 699 #if DEBUG_RX 700 printk(KERN_DEBUG "%s: hss_hdlc_poll all done\n", 701 dev->name); 702 #endif 703 return received; /* all work done */ 704 } 705 706 desc = rx_desc_ptr(port, n); 707 #if 0 /* FIXME - error_count counts modulo 256, perhaps we should use it */ 708 if (desc->error_count) 709 printk(KERN_DEBUG "%s: hss_hdlc_poll status 0x%02X" 710 " errors %u\n", dev->name, desc->status, 711 desc->error_count); 712 #endif 713 skb = NULL; 714 switch (desc->status) { 715 case 0: 716 #ifdef __ARMEB__ 717 skb = netdev_alloc_skb(dev, RX_SIZE); 718 if (skb) { 719 phys = dma_map_single(&dev->dev, skb->data, 720 RX_SIZE, 721 DMA_FROM_DEVICE); 722 if (dma_mapping_error(&dev->dev, phys)) { 723 dev_kfree_skb(skb); 724 skb = NULL; 725 } 726 } 727 #else 728 skb = netdev_alloc_skb(dev, desc->pkt_len); 729 #endif 730 if (!skb) 731 dev->stats.rx_dropped++; 732 break; 733 case ERR_HDLC_ALIGN: 734 case ERR_HDLC_ABORT: 735 dev->stats.rx_frame_errors++; 736 dev->stats.rx_errors++; 737 break; 738 case ERR_HDLC_FCS: 739 dev->stats.rx_crc_errors++; 740 dev->stats.rx_errors++; 741 break; 742 case ERR_HDLC_TOO_LONG: 743 dev->stats.rx_length_errors++; 744 dev->stats.rx_errors++; 745 break; 746 default: /* FIXME - remove printk */ 747 netdev_err(dev, "hss_hdlc_poll: status 0x%02X errors %u\n", 748 desc->status, desc->error_count); 749 dev->stats.rx_errors++; 750 } 751 752 if (!skb) { 753 /* put the desc back on RX-ready queue */ 754 desc->buf_len = RX_SIZE; 755 desc->pkt_len = desc->status = 0; 756 queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc); 757 continue; 758 } 759 760 /* process received frame */ 761 #ifdef __ARMEB__ 762 temp = skb; 763 skb = port->rx_buff_tab[n]; 764 dma_unmap_single(&dev->dev, desc->data, 765 RX_SIZE, DMA_FROM_DEVICE); 766 #else 767 dma_sync_single_for_cpu(&dev->dev, desc->data, 768 RX_SIZE, DMA_FROM_DEVICE); 769 memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n], 770 ALIGN(desc->pkt_len, 4) / 4); 771 #endif 772 skb_put(skb, desc->pkt_len); 773 774 debug_pkt(dev, "hss_hdlc_poll", skb->data, skb->len); 775 776 skb->protocol = hdlc_type_trans(skb, dev); 777 dev->stats.rx_packets++; 778 dev->stats.rx_bytes += skb->len; 779 netif_receive_skb(skb); 780 781 /* put the new buffer on RX-free queue */ 782 #ifdef __ARMEB__ 783 port->rx_buff_tab[n] = temp; 784 desc->data = phys; 785 #endif 786 desc->buf_len = RX_SIZE; 787 desc->pkt_len = 0; 788 queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc); 789 received++; 790 } 791 #if DEBUG_RX 792 printk(KERN_DEBUG "hss_hdlc_poll: end, not all work done\n"); 793 #endif 794 return received; /* not all work done */ 795 } 796 797 static void hss_hdlc_txdone_irq(void *pdev) 798 { 799 struct net_device *dev = pdev; 800 struct port *port = dev_to_port(dev); 801 int n_desc; 802 803 #if DEBUG_TX 804 printk(KERN_DEBUG DRV_NAME ": hss_hdlc_txdone_irq\n"); 805 #endif 806 while ((n_desc = queue_get_desc(port->txdoneq, 807 port, 1)) >= 0) { 808 struct desc *desc; 809 int start; 810 811 desc = tx_desc_ptr(port, n_desc); 812 813 dev->stats.tx_packets++; 814 dev->stats.tx_bytes += desc->pkt_len; 815 816 dma_unmap_tx(port, desc); 817 #if DEBUG_TX 818 printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq free %p\n", 819 dev->name, port->tx_buff_tab[n_desc]); 820 #endif 821 free_buffer_irq(port->tx_buff_tab[n_desc]); 822 port->tx_buff_tab[n_desc] = NULL; 823 824 start = qmgr_stat_below_low_watermark(port->txreadyq); 825 queue_put_desc(port->txreadyq, 826 tx_desc_phys(port, n_desc), desc); 827 if (start) { /* TX-ready queue was empty */ 828 #if DEBUG_TX 829 printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq xmit" 830 " ready\n", dev->name); 831 #endif 832 netif_wake_queue(dev); 833 } 834 } 835 } 836 837 static int hss_hdlc_xmit(struct sk_buff *skb, struct net_device *dev) 838 { 839 struct port *port = dev_to_port(dev); 840 unsigned int txreadyq = port->txreadyq; 841 int len, offset, bytes, n; 842 void *mem; 843 u32 phys; 844 struct desc *desc; 845 846 #if DEBUG_TX 847 printk(KERN_DEBUG "%s: hss_hdlc_xmit\n", dev->name); 848 #endif 849 850 if (unlikely(skb->len > HDLC_MAX_MRU)) { 851 dev_kfree_skb(skb); 852 dev->stats.tx_errors++; 853 return NETDEV_TX_OK; 854 } 855 856 debug_pkt(dev, "hss_hdlc_xmit", skb->data, skb->len); 857 858 len = skb->len; 859 #ifdef __ARMEB__ 860 offset = 0; /* no need to keep alignment */ 861 bytes = len; 862 mem = skb->data; 863 #else 864 offset = (int)skb->data & 3; /* keep 32-bit alignment */ 865 bytes = ALIGN(offset + len, 4); 866 mem = kmalloc(bytes, GFP_ATOMIC); 867 if (!mem) { 868 dev_kfree_skb(skb); 869 dev->stats.tx_dropped++; 870 return NETDEV_TX_OK; 871 } 872 memcpy_swab32(mem, (u32 *)((uintptr_t)skb->data & ~3), bytes / 4); 873 dev_kfree_skb(skb); 874 #endif 875 876 phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE); 877 if (dma_mapping_error(&dev->dev, phys)) { 878 #ifdef __ARMEB__ 879 dev_kfree_skb(skb); 880 #else 881 kfree(mem); 882 #endif 883 dev->stats.tx_dropped++; 884 return NETDEV_TX_OK; 885 } 886 887 n = queue_get_desc(txreadyq, port, 1); 888 BUG_ON(n < 0); 889 desc = tx_desc_ptr(port, n); 890 891 #ifdef __ARMEB__ 892 port->tx_buff_tab[n] = skb; 893 #else 894 port->tx_buff_tab[n] = mem; 895 #endif 896 desc->data = phys + offset; 897 desc->buf_len = desc->pkt_len = len; 898 899 wmb(); 900 queue_put_desc(port->txq, tx_desc_phys(port, n), desc); 901 902 if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */ 903 #if DEBUG_TX 904 printk(KERN_DEBUG "%s: hss_hdlc_xmit queue full\n", dev->name); 905 #endif 906 netif_stop_queue(dev); 907 /* we could miss TX ready interrupt */ 908 if (!qmgr_stat_below_low_watermark(txreadyq)) { 909 #if DEBUG_TX 910 printk(KERN_DEBUG "%s: hss_hdlc_xmit ready again\n", 911 dev->name); 912 #endif 913 netif_wake_queue(dev); 914 } 915 } 916 917 #if DEBUG_TX 918 printk(KERN_DEBUG "%s: hss_hdlc_xmit end\n", dev->name); 919 #endif 920 return NETDEV_TX_OK; 921 } 922 923 static int request_hdlc_queues(struct port *port) 924 { 925 int err; 926 927 err = qmgr_request_queue(port->rxfreeq, RX_DESCS, 0, 0, 928 "%s:RX-free", port->netdev->name); 929 if (err) 930 return err; 931 932 err = qmgr_request_queue(port->rxq, RX_DESCS, 0, 0, 933 "%s:RX", port->netdev->name); 934 if (err) 935 goto rel_rxfree; 936 937 err = qmgr_request_queue(port->txq, TX_DESCS, 0, 0, 938 "%s:TX", port->netdev->name); 939 if (err) 940 goto rel_rx; 941 942 err = qmgr_request_queue(port->txreadyq, TX_DESCS, 0, 0, 943 "%s:TX-ready", port->netdev->name); 944 if (err) 945 goto rel_tx; 946 947 err = qmgr_request_queue(port->txdoneq, TX_DESCS, 0, 0, 948 "%s:TX-done", port->netdev->name); 949 if (err) 950 goto rel_txready; 951 return 0; 952 953 rel_txready: 954 qmgr_release_queue(port->txreadyq); 955 rel_tx: 956 qmgr_release_queue(port->txq); 957 rel_rx: 958 qmgr_release_queue(port->rxq); 959 rel_rxfree: 960 qmgr_release_queue(port->rxfreeq); 961 printk(KERN_DEBUG "%s: unable to request hardware queues\n", 962 port->netdev->name); 963 return err; 964 } 965 966 static void release_hdlc_queues(struct port *port) 967 { 968 qmgr_release_queue(port->rxfreeq); 969 qmgr_release_queue(port->rxq); 970 qmgr_release_queue(port->txdoneq); 971 qmgr_release_queue(port->txq); 972 qmgr_release_queue(port->txreadyq); 973 } 974 975 static int init_hdlc_queues(struct port *port) 976 { 977 int i; 978 979 if (!ports_open) { 980 dma_pool = dma_pool_create(DRV_NAME, &port->netdev->dev, 981 POOL_ALLOC_SIZE, 32, 0); 982 if (!dma_pool) 983 return -ENOMEM; 984 } 985 986 port->desc_tab = dma_pool_zalloc(dma_pool, GFP_KERNEL, 987 &port->desc_tab_phys); 988 if (!port->desc_tab) 989 return -ENOMEM; 990 memset(port->rx_buff_tab, 0, sizeof(port->rx_buff_tab)); /* tables */ 991 memset(port->tx_buff_tab, 0, sizeof(port->tx_buff_tab)); 992 993 /* Setup RX buffers */ 994 for (i = 0; i < RX_DESCS; i++) { 995 struct desc *desc = rx_desc_ptr(port, i); 996 buffer_t *buff; 997 void *data; 998 #ifdef __ARMEB__ 999 buff = netdev_alloc_skb(port->netdev, RX_SIZE); 1000 if (!buff) 1001 return -ENOMEM; 1002 data = buff->data; 1003 #else 1004 buff = kmalloc(RX_SIZE, GFP_KERNEL); 1005 if (!buff) 1006 return -ENOMEM; 1007 data = buff; 1008 #endif 1009 desc->buf_len = RX_SIZE; 1010 desc->data = dma_map_single(&port->netdev->dev, data, 1011 RX_SIZE, DMA_FROM_DEVICE); 1012 if (dma_mapping_error(&port->netdev->dev, desc->data)) { 1013 free_buffer(buff); 1014 return -EIO; 1015 } 1016 port->rx_buff_tab[i] = buff; 1017 } 1018 1019 return 0; 1020 } 1021 1022 static void destroy_hdlc_queues(struct port *port) 1023 { 1024 int i; 1025 1026 if (port->desc_tab) { 1027 for (i = 0; i < RX_DESCS; i++) { 1028 struct desc *desc = rx_desc_ptr(port, i); 1029 buffer_t *buff = port->rx_buff_tab[i]; 1030 1031 if (buff) { 1032 dma_unmap_single(&port->netdev->dev, 1033 desc->data, RX_SIZE, 1034 DMA_FROM_DEVICE); 1035 free_buffer(buff); 1036 } 1037 } 1038 for (i = 0; i < TX_DESCS; i++) { 1039 struct desc *desc = tx_desc_ptr(port, i); 1040 buffer_t *buff = port->tx_buff_tab[i]; 1041 1042 if (buff) { 1043 dma_unmap_tx(port, desc); 1044 free_buffer(buff); 1045 } 1046 } 1047 dma_pool_free(dma_pool, port->desc_tab, port->desc_tab_phys); 1048 port->desc_tab = NULL; 1049 } 1050 1051 if (!ports_open && dma_pool) { 1052 dma_pool_destroy(dma_pool); 1053 dma_pool = NULL; 1054 } 1055 } 1056 1057 static irqreturn_t hss_hdlc_dcd_irq(int irq, void *data) 1058 { 1059 struct net_device *dev = data; 1060 struct port *port = dev_to_port(dev); 1061 int val; 1062 1063 val = gpiod_get_value(port->dcd); 1064 hss_hdlc_set_carrier(dev, val); 1065 1066 return IRQ_HANDLED; 1067 } 1068 1069 static int hss_hdlc_open(struct net_device *dev) 1070 { 1071 struct port *port = dev_to_port(dev); 1072 unsigned long flags; 1073 int i, err = 0; 1074 int val; 1075 1076 err = hdlc_open(dev); 1077 if (err) 1078 return err; 1079 1080 err = hss_load_firmware(port); 1081 if (err) 1082 goto err_hdlc_close; 1083 1084 err = request_hdlc_queues(port); 1085 if (err) 1086 goto err_hdlc_close; 1087 1088 err = init_hdlc_queues(port); 1089 if (err) 1090 goto err_destroy_queues; 1091 1092 spin_lock_irqsave(&npe_lock, flags); 1093 1094 /* Set the carrier, the GPIO is flagged active low so this will return 1095 * 1 if DCD is asserted. 1096 */ 1097 val = gpiod_get_value(port->dcd); 1098 hss_hdlc_set_carrier(dev, val); 1099 1100 /* Set up an IRQ for DCD */ 1101 err = request_irq(gpiod_to_irq(port->dcd), hss_hdlc_dcd_irq, 0, "IXP4xx HSS", dev); 1102 if (err) { 1103 dev_err(&dev->dev, "ixp4xx_hss: failed to request DCD IRQ (%i)\n", err); 1104 goto err_unlock; 1105 } 1106 1107 /* GPIOs are flagged active low so this asserts DTR and RTS */ 1108 gpiod_set_value(port->dtr, 1); 1109 gpiod_set_value(port->rts, 1); 1110 1111 spin_unlock_irqrestore(&npe_lock, flags); 1112 1113 /* Populate queues with buffers, no failure after this point */ 1114 for (i = 0; i < TX_DESCS; i++) 1115 queue_put_desc(port->txreadyq, 1116 tx_desc_phys(port, i), tx_desc_ptr(port, i)); 1117 1118 for (i = 0; i < RX_DESCS; i++) 1119 queue_put_desc(port->rxfreeq, 1120 rx_desc_phys(port, i), rx_desc_ptr(port, i)); 1121 1122 napi_enable(&port->napi); 1123 netif_start_queue(dev); 1124 1125 qmgr_set_irq(port->rxq, QUEUE_IRQ_SRC_NOT_EMPTY, 1126 hss_hdlc_rx_irq, dev); 1127 1128 qmgr_set_irq(port->txdoneq, QUEUE_IRQ_SRC_NOT_EMPTY, 1129 hss_hdlc_txdone_irq, dev); 1130 qmgr_enable_irq(port->txdoneq); 1131 1132 ports_open++; 1133 1134 hss_set_hdlc_cfg(port); 1135 hss_config(port); 1136 1137 hss_start_hdlc(port); 1138 1139 /* we may already have RX data, enables IRQ */ 1140 napi_schedule(&port->napi); 1141 return 0; 1142 1143 err_unlock: 1144 spin_unlock_irqrestore(&npe_lock, flags); 1145 err_destroy_queues: 1146 destroy_hdlc_queues(port); 1147 release_hdlc_queues(port); 1148 err_hdlc_close: 1149 hdlc_close(dev); 1150 return err; 1151 } 1152 1153 static int hss_hdlc_close(struct net_device *dev) 1154 { 1155 struct port *port = dev_to_port(dev); 1156 unsigned long flags; 1157 int i, buffs = RX_DESCS; /* allocated RX buffers */ 1158 1159 spin_lock_irqsave(&npe_lock, flags); 1160 ports_open--; 1161 qmgr_disable_irq(port->rxq); 1162 netif_stop_queue(dev); 1163 napi_disable(&port->napi); 1164 1165 hss_stop_hdlc(port); 1166 1167 while (queue_get_desc(port->rxfreeq, port, 0) >= 0) 1168 buffs--; 1169 while (queue_get_desc(port->rxq, port, 0) >= 0) 1170 buffs--; 1171 1172 if (buffs) 1173 netdev_crit(dev, "unable to drain RX queue, %i buffer(s) left in NPE\n", 1174 buffs); 1175 1176 buffs = TX_DESCS; 1177 while (queue_get_desc(port->txq, port, 1) >= 0) 1178 buffs--; /* cancel TX */ 1179 1180 i = 0; 1181 do { 1182 while (queue_get_desc(port->txreadyq, port, 1) >= 0) 1183 buffs--; 1184 if (!buffs) 1185 break; 1186 } while (++i < MAX_CLOSE_WAIT); 1187 1188 if (buffs) 1189 netdev_crit(dev, "unable to drain TX queue, %i buffer(s) left in NPE\n", 1190 buffs); 1191 #if DEBUG_CLOSE 1192 if (!buffs) 1193 printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i); 1194 #endif 1195 qmgr_disable_irq(port->txdoneq); 1196 1197 free_irq(gpiod_to_irq(port->dcd), dev); 1198 /* GPIOs are flagged active low so this de-asserts DTR and RTS */ 1199 gpiod_set_value(port->dtr, 0); 1200 gpiod_set_value(port->rts, 0); 1201 spin_unlock_irqrestore(&npe_lock, flags); 1202 1203 destroy_hdlc_queues(port); 1204 release_hdlc_queues(port); 1205 hdlc_close(dev); 1206 return 0; 1207 } 1208 1209 static int hss_hdlc_attach(struct net_device *dev, unsigned short encoding, 1210 unsigned short parity) 1211 { 1212 struct port *port = dev_to_port(dev); 1213 1214 if (encoding != ENCODING_NRZ) 1215 return -EINVAL; 1216 1217 switch (parity) { 1218 case PARITY_CRC16_PR1_CCITT: 1219 port->hdlc_cfg = 0; 1220 return 0; 1221 1222 case PARITY_CRC32_PR1_CCITT: 1223 port->hdlc_cfg = PKT_HDLC_CRC_32; 1224 return 0; 1225 1226 default: 1227 return -EINVAL; 1228 } 1229 } 1230 1231 static u32 check_clock(u32 timer_freq, u32 rate, u32 a, u32 b, u32 c, 1232 u32 *best, u32 *best_diff, u32 *reg) 1233 { 1234 /* a is 10-bit, b is 10-bit, c is 12-bit */ 1235 u64 new_rate; 1236 u32 new_diff; 1237 1238 new_rate = timer_freq * (u64)(c + 1); 1239 do_div(new_rate, a * (c + 1) + b + 1); 1240 new_diff = abs((u32)new_rate - rate); 1241 1242 if (new_diff < *best_diff) { 1243 *best = new_rate; 1244 *best_diff = new_diff; 1245 *reg = (a << 22) | (b << 12) | c; 1246 } 1247 return new_diff; 1248 } 1249 1250 static void find_best_clock(u32 timer_freq, u32 rate, u32 *best, u32 *reg) 1251 { 1252 u32 a, b, diff = 0xFFFFFFFF; 1253 1254 a = timer_freq / rate; 1255 1256 if (a > 0x3FF) { /* 10-bit value - we can go as slow as ca. 65 kb/s */ 1257 check_clock(timer_freq, rate, 0x3FF, 1, 1, best, &diff, reg); 1258 return; 1259 } 1260 if (a == 0) { /* > 66.666 MHz */ 1261 a = 1; /* minimum divider is 1 (a = 0, b = 1, c = 1) */ 1262 rate = timer_freq; 1263 } 1264 1265 if (rate * a == timer_freq) { /* don't divide by 0 later */ 1266 check_clock(timer_freq, rate, a - 1, 1, 1, best, &diff, reg); 1267 return; 1268 } 1269 1270 for (b = 0; b < 0x400; b++) { 1271 u64 c = (b + 1) * (u64)rate; 1272 1273 do_div(c, timer_freq - rate * a); 1274 c--; 1275 if (c >= 0xFFF) { /* 12-bit - no need to check more 'b's */ 1276 if (b == 0 && /* also try a bit higher rate */ 1277 !check_clock(timer_freq, rate, a - 1, 1, 1, best, 1278 &diff, reg)) 1279 return; 1280 check_clock(timer_freq, rate, a, b, 0xFFF, best, 1281 &diff, reg); 1282 return; 1283 } 1284 if (!check_clock(timer_freq, rate, a, b, c, best, &diff, reg)) 1285 return; 1286 if (!check_clock(timer_freq, rate, a, b, c + 1, best, &diff, 1287 reg)) 1288 return; 1289 } 1290 } 1291 1292 static int hss_hdlc_set_clock(struct port *port, unsigned int clock_type) 1293 { 1294 switch (clock_type) { 1295 case CLOCK_DEFAULT: 1296 case CLOCK_EXT: 1297 gpiod_set_value(port->clk_internal, 0); 1298 return CLOCK_EXT; 1299 case CLOCK_INT: 1300 gpiod_set_value(port->clk_internal, 1); 1301 return CLOCK_INT; 1302 default: 1303 return -EINVAL; 1304 } 1305 } 1306 1307 static int hss_hdlc_ioctl(struct net_device *dev, struct if_settings *ifs) 1308 { 1309 const size_t size = sizeof(sync_serial_settings); 1310 sync_serial_settings new_line; 1311 sync_serial_settings __user *line = ifs->ifs_ifsu.sync; 1312 struct port *port = dev_to_port(dev); 1313 unsigned long flags; 1314 int clk; 1315 1316 switch (ifs->type) { 1317 case IF_GET_IFACE: 1318 ifs->type = IF_IFACE_V35; 1319 if (ifs->size < size) { 1320 ifs->size = size; /* data size wanted */ 1321 return -ENOBUFS; 1322 } 1323 memset(&new_line, 0, sizeof(new_line)); 1324 new_line.clock_type = port->clock_type; 1325 new_line.clock_rate = port->clock_rate; 1326 new_line.loopback = port->loopback; 1327 if (copy_to_user(line, &new_line, size)) 1328 return -EFAULT; 1329 return 0; 1330 1331 case IF_IFACE_SYNC_SERIAL: 1332 case IF_IFACE_V35: 1333 if (!capable(CAP_NET_ADMIN)) 1334 return -EPERM; 1335 if (copy_from_user(&new_line, line, size)) 1336 return -EFAULT; 1337 1338 clk = new_line.clock_type; 1339 hss_hdlc_set_clock(port, clk); 1340 1341 if (clk != CLOCK_EXT && clk != CLOCK_INT) 1342 return -EINVAL; /* No such clock setting */ 1343 1344 if (new_line.loopback != 0 && new_line.loopback != 1) 1345 return -EINVAL; 1346 1347 port->clock_type = clk; /* Update settings */ 1348 if (clk == CLOCK_INT) { 1349 find_best_clock(IXP4XX_TIMER_FREQ, 1350 new_line.clock_rate, 1351 &port->clock_rate, &port->clock_reg); 1352 } else { 1353 port->clock_rate = 0; 1354 port->clock_reg = CLK42X_SPEED_2048KHZ; 1355 } 1356 port->loopback = new_line.loopback; 1357 1358 spin_lock_irqsave(&npe_lock, flags); 1359 1360 if (dev->flags & IFF_UP) 1361 hss_config(port); 1362 1363 if (port->loopback || port->carrier) 1364 netif_carrier_on(port->netdev); 1365 else 1366 netif_carrier_off(port->netdev); 1367 spin_unlock_irqrestore(&npe_lock, flags); 1368 1369 return 0; 1370 1371 default: 1372 return hdlc_ioctl(dev, ifs); 1373 } 1374 } 1375 1376 /***************************************************************************** 1377 * initialization 1378 ****************************************************************************/ 1379 1380 static const struct net_device_ops hss_hdlc_ops = { 1381 .ndo_open = hss_hdlc_open, 1382 .ndo_stop = hss_hdlc_close, 1383 .ndo_start_xmit = hdlc_start_xmit, 1384 .ndo_siocwandev = hss_hdlc_ioctl, 1385 }; 1386 1387 static int ixp4xx_hss_probe(struct platform_device *pdev) 1388 { 1389 struct of_phandle_args queue_spec; 1390 struct of_phandle_args npe_spec; 1391 struct device *dev = &pdev->dev; 1392 struct net_device *ndev; 1393 struct device_node *np; 1394 struct regmap *rmap; 1395 struct port *port; 1396 hdlc_device *hdlc; 1397 int err; 1398 u32 val; 1399 1400 /* 1401 * Go into the syscon and check if we have the HSS and HDLC 1402 * features available, else this will not work. 1403 */ 1404 rmap = syscon_regmap_lookup_by_compatible("syscon"); 1405 if (IS_ERR(rmap)) 1406 return dev_err_probe(dev, PTR_ERR(rmap), 1407 "failed to look up syscon\n"); 1408 1409 val = cpu_ixp4xx_features(rmap); 1410 1411 if ((val & (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) != 1412 (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) { 1413 dev_err(dev, "HDLC and HSS feature unavailable in platform\n"); 1414 return -ENODEV; 1415 } 1416 1417 np = dev->of_node; 1418 1419 port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL); 1420 if (!port) 1421 return -ENOMEM; 1422 1423 err = of_parse_phandle_with_fixed_args(np, "intel,npe-handle", 1, 0, 1424 &npe_spec); 1425 if (err) 1426 return dev_err_probe(dev, err, "no NPE engine specified\n"); 1427 /* NPE ID 0x00, 0x10, 0x20... */ 1428 port->npe = npe_request(npe_spec.args[0] << 4); 1429 if (!port->npe) { 1430 dev_err(dev, "unable to obtain NPE instance\n"); 1431 return -ENODEV; 1432 } 1433 1434 /* Get the TX ready queue as resource from queue manager */ 1435 err = of_parse_phandle_with_fixed_args(np, "intek,queue-chl-txready", 1, 0, 1436 &queue_spec); 1437 if (err) 1438 return dev_err_probe(dev, err, "no txready queue phandle\n"); 1439 port->txreadyq = queue_spec.args[0]; 1440 /* Get the RX trig queue as resource from queue manager */ 1441 err = of_parse_phandle_with_fixed_args(np, "intek,queue-chl-rxtrig", 1, 0, 1442 &queue_spec); 1443 if (err) 1444 return dev_err_probe(dev, err, "no rxtrig queue phandle\n"); 1445 port->rxtrigq = queue_spec.args[0]; 1446 /* Get the RX queue as resource from queue manager */ 1447 err = of_parse_phandle_with_fixed_args(np, "intek,queue-pkt-rx", 1, 0, 1448 &queue_spec); 1449 if (err) 1450 return dev_err_probe(dev, err, "no RX queue phandle\n"); 1451 port->rxq = queue_spec.args[0]; 1452 /* Get the TX queue as resource from queue manager */ 1453 err = of_parse_phandle_with_fixed_args(np, "intek,queue-pkt-tx", 1, 0, 1454 &queue_spec); 1455 if (err) 1456 return dev_err_probe(dev, err, "no RX queue phandle\n"); 1457 port->txq = queue_spec.args[0]; 1458 /* Get the RX free queue as resource from queue manager */ 1459 err = of_parse_phandle_with_fixed_args(np, "intek,queue-pkt-rxfree", 1, 0, 1460 &queue_spec); 1461 if (err) 1462 return dev_err_probe(dev, err, "no RX free queue phandle\n"); 1463 port->rxfreeq = queue_spec.args[0]; 1464 /* Get the TX done queue as resource from queue manager */ 1465 err = of_parse_phandle_with_fixed_args(np, "intek,queue-pkt-txdone", 1, 0, 1466 &queue_spec); 1467 if (err) 1468 return dev_err_probe(dev, err, "no TX done queue phandle\n"); 1469 port->txdoneq = queue_spec.args[0]; 1470 1471 /* Obtain all the line control GPIOs */ 1472 port->cts = devm_gpiod_get(dev, "cts", GPIOD_OUT_LOW); 1473 if (IS_ERR(port->cts)) 1474 return dev_err_probe(dev, PTR_ERR(port->cts), "unable to get CTS GPIO\n"); 1475 port->rts = devm_gpiod_get(dev, "rts", GPIOD_OUT_LOW); 1476 if (IS_ERR(port->rts)) 1477 return dev_err_probe(dev, PTR_ERR(port->rts), "unable to get RTS GPIO\n"); 1478 port->dcd = devm_gpiod_get(dev, "dcd", GPIOD_IN); 1479 if (IS_ERR(port->dcd)) 1480 return dev_err_probe(dev, PTR_ERR(port->dcd), "unable to get DCD GPIO\n"); 1481 port->dtr = devm_gpiod_get(dev, "dtr", GPIOD_OUT_LOW); 1482 if (IS_ERR(port->dtr)) 1483 return dev_err_probe(dev, PTR_ERR(port->dtr), "unable to get DTR GPIO\n"); 1484 port->clk_internal = devm_gpiod_get(dev, "clk-internal", GPIOD_OUT_LOW); 1485 if (IS_ERR(port->clk_internal)) 1486 return dev_err_probe(dev, PTR_ERR(port->clk_internal), 1487 "unable to get CLK internal GPIO\n"); 1488 1489 ndev = alloc_hdlcdev(port); 1490 port->netdev = alloc_hdlcdev(port); 1491 if (!port->netdev) { 1492 err = -ENOMEM; 1493 goto err_plat; 1494 } 1495 1496 SET_NETDEV_DEV(ndev, &pdev->dev); 1497 hdlc = dev_to_hdlc(ndev); 1498 hdlc->attach = hss_hdlc_attach; 1499 hdlc->xmit = hss_hdlc_xmit; 1500 ndev->netdev_ops = &hss_hdlc_ops; 1501 ndev->tx_queue_len = 100; 1502 port->clock_type = CLOCK_EXT; 1503 port->clock_rate = 0; 1504 port->clock_reg = CLK42X_SPEED_2048KHZ; 1505 port->id = pdev->id; 1506 port->dev = &pdev->dev; 1507 netif_napi_add(ndev, &port->napi, hss_hdlc_poll, NAPI_WEIGHT); 1508 1509 err = register_hdlc_device(ndev); 1510 if (err) 1511 goto err_free_netdev; 1512 1513 platform_set_drvdata(pdev, port); 1514 1515 netdev_info(ndev, "initialized\n"); 1516 return 0; 1517 1518 err_free_netdev: 1519 free_netdev(ndev); 1520 err_plat: 1521 npe_release(port->npe); 1522 return err; 1523 } 1524 1525 static int ixp4xx_hss_remove(struct platform_device *pdev) 1526 { 1527 struct port *port = platform_get_drvdata(pdev); 1528 1529 unregister_hdlc_device(port->netdev); 1530 free_netdev(port->netdev); 1531 npe_release(port->npe); 1532 return 0; 1533 } 1534 1535 static struct platform_driver ixp4xx_hss_driver = { 1536 .driver.name = DRV_NAME, 1537 .probe = ixp4xx_hss_probe, 1538 .remove = ixp4xx_hss_remove, 1539 }; 1540 module_platform_driver(ixp4xx_hss_driver); 1541 1542 MODULE_AUTHOR("Krzysztof Halasa"); 1543 MODULE_DESCRIPTION("Intel IXP4xx HSS driver"); 1544 MODULE_LICENSE("GPL v2"); 1545 MODULE_ALIAS("platform:ixp4xx_hss"); 1546