xref: /openbmc/linux/drivers/net/wan/hd64570.h (revision 293d5b43)
1 #ifndef __HD64570_H
2 #define __HD64570_H
3 
4 /* SCA HD64570 register definitions - all addresses for mode 0 (8086 MPU)
5    and 1 (64180 MPU). For modes 2 and 3, XOR the address with 0x01.
6 
7    Source: HD64570 SCA User's Manual
8 */
9 
10 
11 
12 /* SCA Control Registers */
13 #define LPR    0x00		/* Low Power */
14 
15 /* Wait controller registers */
16 #define PABR0  0x02		/* Physical Address Boundary 0 */
17 #define PABR1  0x03		/* Physical Address Boundary 1 */
18 #define WCRL   0x04		/* Wait Control L */
19 #define WCRM   0x05		/* Wait Control M */
20 #define WCRH   0x06		/* Wait Control H */
21 
22 #define PCR    0x08		/* DMA Priority Control */
23 #define DMER   0x09		/* DMA Master Enable */
24 
25 
26 /* Interrupt registers */
27 #define ISR0   0x10		/* Interrupt Status 0  */
28 #define ISR1   0x11		/* Interrupt Status 1  */
29 #define ISR2   0x12		/* Interrupt Status 2  */
30 
31 #define IER0   0x14		/* Interrupt Enable 0  */
32 #define IER1   0x15		/* Interrupt Enable 1  */
33 #define IER2   0x16		/* Interrupt Enable 2  */
34 
35 #define ITCR   0x18		/* Interrupt Control */
36 #define IVR    0x1A		/* Interrupt Vector */
37 #define IMVR   0x1C		/* Interrupt Modified Vector */
38 
39 
40 
41 /* MSCI channel (port) 0 registers - offset 0x20
42    MSCI channel (port) 1 registers - offset 0x40 */
43 
44 #define MSCI0_OFFSET 0x20
45 #define MSCI1_OFFSET 0x40
46 
47 #define TRBL   0x00		/* TX/RX buffer L */
48 #define TRBH   0x01		/* TX/RX buffer H */
49 #define ST0    0x02		/* Status 0 */
50 #define ST1    0x03		/* Status 1 */
51 #define ST2    0x04		/* Status 2 */
52 #define ST3    0x05		/* Status 3 */
53 #define FST    0x06		/* Frame Status  */
54 #define IE0    0x08		/* Interrupt Enable 0 */
55 #define IE1    0x09		/* Interrupt Enable 1 */
56 #define IE2    0x0A		/* Interrupt Enable 2 */
57 #define FIE    0x0B		/* Frame Interrupt Enable  */
58 #define CMD    0x0C		/* Command */
59 #define MD0    0x0E		/* Mode 0 */
60 #define MD1    0x0F		/* Mode 1 */
61 #define MD2    0x10		/* Mode 2 */
62 #define CTL    0x11		/* Control */
63 #define SA0    0x12		/* Sync/Address 0 */
64 #define SA1    0x13		/* Sync/Address 1 */
65 #define IDL    0x14		/* Idle Pattern */
66 #define TMC    0x15		/* Time Constant */
67 #define RXS    0x16		/* RX Clock Source */
68 #define TXS    0x17		/* TX Clock Source */
69 #define TRC0   0x18		/* TX Ready Control 0 */
70 #define TRC1   0x19		/* TX Ready Control 1 */
71 #define RRC    0x1A		/* RX Ready Control */
72 #define CST0   0x1C		/* Current Status 0 */
73 #define CST1   0x1D		/* Current Status 1 */
74 
75 
76 /* Timer channel 0 (port 0 RX) registers - offset 0x60
77    Timer channel 1 (port 0 TX) registers - offset 0x68
78    Timer channel 2 (port 1 RX) registers - offset 0x70
79    Timer channel 3 (port 1 TX) registers - offset 0x78
80 */
81 
82 #define TIMER0RX_OFFSET 0x60
83 #define TIMER0TX_OFFSET 0x68
84 #define TIMER1RX_OFFSET 0x70
85 #define TIMER1TX_OFFSET 0x78
86 
87 #define TCNTL  0x00		/* Up-counter L */
88 #define TCNTH  0x01		/* Up-counter H */
89 #define TCONRL 0x02		/* Constant L */
90 #define TCONRH 0x03		/* Constant H */
91 #define TCSR   0x04		/* Control/Status */
92 #define TEPR   0x05		/* Expand Prescale */
93 
94 
95 
96 /* DMA channel 0 (port 0 RX) registers - offset 0x80
97    DMA channel 1 (port 0 TX) registers - offset 0xA0
98    DMA channel 2 (port 1 RX) registers - offset 0xC0
99    DMA channel 3 (port 1 TX) registers - offset 0xE0
100 */
101 
102 #define DMAC0RX_OFFSET 0x80
103 #define DMAC0TX_OFFSET 0xA0
104 #define DMAC1RX_OFFSET 0xC0
105 #define DMAC1TX_OFFSET 0xE0
106 
107 #define BARL   0x00		/* Buffer Address L (chained block) */
108 #define BARH   0x01		/* Buffer Address H (chained block) */
109 #define BARB   0x02		/* Buffer Address B (chained block) */
110 
111 #define DARL   0x00		/* RX Destination Addr L (single block) */
112 #define DARH   0x01		/* RX Destination Addr H (single block) */
113 #define DARB   0x02		/* RX Destination Addr B (single block) */
114 
115 #define SARL   0x04		/* TX Source Address L (single block) */
116 #define SARH   0x05		/* TX Source Address H (single block) */
117 #define SARB   0x06		/* TX Source Address B (single block) */
118 
119 #define CPB    0x06		/* Chain Pointer Base (chained block) */
120 
121 #define CDAL   0x08		/* Current Descriptor Addr L (chained block) */
122 #define CDAH   0x09		/* Current Descriptor Addr H (chained block) */
123 #define EDAL   0x0A		/* Error Descriptor Addr L (chained block) */
124 #define EDAH   0x0B		/* Error Descriptor Addr H (chained block) */
125 #define BFLL   0x0C		/* RX Receive Buffer Length L (chained block)*/
126 #define BFLH   0x0D		/* RX Receive Buffer Length H (chained block)*/
127 #define BCRL   0x0E		/* Byte Count L */
128 #define BCRH   0x0F		/* Byte Count H */
129 #define DSR    0x10		/* DMA Status */
130 #define DSR_RX(node) (DSR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
131 #define DSR_TX(node) (DSR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
132 #define DMR    0x11		/* DMA Mode */
133 #define DMR_RX(node) (DMR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
134 #define DMR_TX(node) (DMR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
135 #define FCT    0x13		/* Frame End Interrupt Counter */
136 #define FCT_RX(node) (FCT + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
137 #define FCT_TX(node) (FCT + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
138 #define DIR    0x14		/* DMA Interrupt Enable */
139 #define DIR_RX(node) (DIR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
140 #define DIR_TX(node) (DIR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
141 #define DCR    0x15		/* DMA Command  */
142 #define DCR_RX(node) (DCR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
143 #define DCR_TX(node) (DCR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
144 
145 
146 
147 
148 /* Descriptor Structure */
149 
150 typedef struct {
151 	u16 cp;			/* Chain Pointer */
152 	u32 bp;			/* Buffer Pointer (24 bits) */
153 	u16 len;		/* Data Length */
154 	u8 stat;		/* Status */
155 	u8 unused;		/* pads to 2-byte boundary */
156 }__packed pkt_desc;
157 
158 
159 /* Packet Descriptor Status bits */
160 
161 #define ST_TX_EOM     0x80	/* End of frame */
162 #define ST_TX_EOT     0x01	/* End of transmission */
163 
164 #define ST_RX_EOM     0x80	/* End of frame */
165 #define ST_RX_SHORT   0x40	/* Short frame */
166 #define ST_RX_ABORT   0x20	/* Abort */
167 #define ST_RX_RESBIT  0x10	/* Residual bit */
168 #define ST_RX_OVERRUN 0x08	/* Overrun */
169 #define ST_RX_CRC     0x04	/* CRC */
170 
171 #define ST_ERROR_MASK 0x7C
172 
173 #define DIR_EOTE      0x80      /* Transfer completed */
174 #define DIR_EOME      0x40      /* Frame Transfer Completed (chained-block) */
175 #define DIR_BOFE      0x20      /* Buffer Overflow/Underflow (chained-block)*/
176 #define DIR_COFE      0x10      /* Counter Overflow (chained-block) */
177 
178 
179 #define DSR_EOT       0x80      /* Transfer completed */
180 #define DSR_EOM       0x40      /* Frame Transfer Completed (chained-block) */
181 #define DSR_BOF       0x20      /* Buffer Overflow/Underflow (chained-block)*/
182 #define DSR_COF       0x10      /* Counter Overflow (chained-block) */
183 #define DSR_DE        0x02	/* DMA Enable */
184 #define DSR_DWE       0x01      /* DMA Write Disable */
185 
186 /* DMA Master Enable Register (DMER) bits */
187 #define DMER_DME      0x80	/* DMA Master Enable */
188 
189 
190 #define CMD_RESET     0x21	/* Reset Channel */
191 #define CMD_TX_ENABLE 0x02	/* Start transmitter */
192 #define CMD_RX_ENABLE 0x12	/* Start receiver */
193 
194 #define MD0_HDLC      0x80	/* Bit-sync HDLC mode */
195 #define MD0_CRC_ENA   0x04	/* Enable CRC code calculation */
196 #define MD0_CRC_CCITT 0x02	/* CCITT CRC instead of CRC-16 */
197 #define MD0_CRC_PR1   0x01	/* Initial all-ones instead of all-zeros */
198 
199 #define MD0_CRC_NONE  0x00
200 #define MD0_CRC_16_0  0x04
201 #define MD0_CRC_16    0x05
202 #define MD0_CRC_ITU_0 0x06
203 #define MD0_CRC_ITU   0x07
204 
205 #define MD2_NRZ	      0x00
206 #define MD2_NRZI      0x20
207 #define MD2_MANCHESTER 0x80
208 #define MD2_FM_MARK   0xA0
209 #define MD2_FM_SPACE  0xC0
210 #define MD2_LOOPBACK  0x03      /* Local data Loopback */
211 
212 #define CTL_NORTS     0x01
213 #define CTL_IDLE      0x10	/* Transmit an idle pattern */
214 #define CTL_UDRNC     0x20	/* Idle after CRC or FCS+flag transmission */
215 
216 #define ST0_TXRDY     0x02	/* TX ready */
217 #define ST0_RXRDY     0x01	/* RX ready */
218 
219 #define ST1_UDRN      0x80	/* MSCI TX underrun */
220 #define ST1_CDCD      0x04	/* DCD level changed */
221 
222 #define ST3_CTS       0x08	/* modem input - /CTS */
223 #define ST3_DCD       0x04	/* modem input - /DCD */
224 
225 #define IE0_TXINT     0x80	/* TX INT MSCI interrupt enable */
226 #define IE0_RXINTA    0x40	/* RX INT A MSCI interrupt enable */
227 #define IE1_UDRN      0x80	/* TX underrun MSCI interrupt enable */
228 #define IE1_CDCD      0x04	/* DCD level changed */
229 
230 #define DCR_ABORT     0x01	/* Software abort command */
231 #define DCR_CLEAR_EOF 0x02	/* Clear EOF interrupt */
232 
233 /* TX and RX Clock Source - RXS and TXS */
234 #define CLK_BRG_MASK  0x0F
235 #define CLK_LINE_RX   0x00	/* TX/RX clock line input */
236 #define CLK_LINE_TX   0x00	/* TX/RX line input */
237 #define CLK_BRG_RX    0x40	/* internal baud rate generator */
238 #define CLK_BRG_TX    0x40	/* internal baud rate generator */
239 #define CLK_RXCLK_TX  0x60	/* TX clock from RX clock */
240 
241 #endif
242