1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 /* 3 * FarSync X21 driver for Linux 4 * 5 * Actually sync driver for X.21, V.35 and V.24 on FarSync T-series cards 6 * 7 * Copyright (C) 2001 FarSite Communications Ltd. 8 * www.farsite.co.uk 9 * 10 * Author: R.J.Dunlop <bob.dunlop@farsite.co.uk> 11 * 12 * For the most part this file only contains structures and information 13 * that is visible to applications outside the driver. Shared memory 14 * layout etc is internal to the driver and described within farsync.c. 15 * Overlap exists in that the values used for some fields within the 16 * ioctl interface extend into the cards firmware interface so values in 17 * this file may not be changed arbitrarily. 18 */ 19 20 /* What's in a name 21 * 22 * The project name for this driver is Oscar. The driver is intended to be 23 * used with the FarSite T-Series cards (T2P & T4P) running in the high 24 * speed frame shifter mode. This is sometimes referred to as X.21 mode 25 * which is a complete misnomer as the card continues to support V.24 and 26 * V.35 as well as X.21. 27 * 28 * A short common prefix is useful for routines within the driver to avoid 29 * conflict with other similar drivers and I chosen to use "fst_" for this 30 * purpose (FarSite T-series). 31 * 32 * Finally the device driver needs a short network interface name. Since 33 * "hdlc" is already in use I've chosen the even less informative "sync" 34 * for the present. 35 */ 36 #define FST_NAME "fst" /* In debug/info etc */ 37 #define FST_NDEV_NAME "sync" /* For net interface */ 38 #define FST_DEV_NAME "farsync" /* For misc interfaces */ 39 40 41 /* User version number 42 * 43 * This version number is incremented with each official release of the 44 * package and is a simplified number for normal user reference. 45 * Individual files are tracked by the version control system and may 46 * have individual versions (or IDs) that move much faster than 47 * the release version as individual updates are tracked. 48 */ 49 #define FST_USER_VERSION "1.04" 50 51 52 /* Ioctl call command values 53 */ 54 #define FSTWRITE (SIOCDEVPRIVATE+10) 55 #define FSTCPURESET (SIOCDEVPRIVATE+11) 56 #define FSTCPURELEASE (SIOCDEVPRIVATE+12) 57 #define FSTGETCONF (SIOCDEVPRIVATE+13) 58 #define FSTSETCONF (SIOCDEVPRIVATE+14) 59 60 61 /* FSTWRITE 62 * 63 * Used to write a block of data (firmware etc) before the card is running 64 */ 65 struct fstioc_write { 66 unsigned int size; 67 unsigned int offset; 68 unsigned char data[]; 69 }; 70 71 72 /* FSTCPURESET and FSTCPURELEASE 73 * 74 * These take no additional data. 75 * FSTCPURESET forces the cards CPU into a reset state and holds it there. 76 * FSTCPURELEASE releases the CPU from this reset state allowing it to run, 77 * the reset vector should be setup before this ioctl is run. 78 */ 79 80 /* FSTGETCONF and FSTSETCONF 81 * 82 * Get and set a card/ports configuration. 83 * In order to allow selective setting of items and for the kernel to 84 * indicate a partial status response the first field "valid" is a bitmask 85 * indicating which other fields in the structure are valid. 86 * Many of the field names in this structure match those used in the 87 * firmware shared memory configuration interface and come originally from 88 * the NT header file Smc.h 89 * 90 * When used with FSTGETCONF this structure should be zeroed before use. 91 * This is to allow for possible future expansion when some of the fields 92 * might be used to indicate a different (expanded) structure. 93 */ 94 struct fstioc_info { 95 unsigned int valid; /* Bits of structure that are valid */ 96 unsigned int nports; /* Number of serial ports */ 97 unsigned int type; /* Type index of card */ 98 unsigned int state; /* State of card */ 99 unsigned int index; /* Index of port ioctl was issued on */ 100 unsigned int smcFirmwareVersion; 101 unsigned long kernelVersion; /* What Kernel version we are working with */ 102 unsigned short lineInterface; /* Physical interface type */ 103 unsigned char proto; /* Line protocol */ 104 unsigned char internalClock; /* 1 => internal clock, 0 => external */ 105 unsigned int lineSpeed; /* Speed in bps */ 106 unsigned int v24IpSts; /* V.24 control input status */ 107 unsigned int v24OpSts; /* V.24 control output status */ 108 unsigned short clockStatus; /* lsb: 0=> present, 1=> absent */ 109 unsigned short cableStatus; /* lsb: 0=> present, 1=> absent */ 110 unsigned short cardMode; /* lsb: LED id mode */ 111 unsigned short debug; /* Debug flags */ 112 unsigned char transparentMode; /* Not used always 0 */ 113 unsigned char invertClock; /* Invert clock feature for syncing */ 114 unsigned char startingSlot; /* Time slot to use for start of tx */ 115 unsigned char clockSource; /* External or internal */ 116 unsigned char framing; /* E1, T1 or J1 */ 117 unsigned char structure; /* unframed, double, crc4, f4, f12, */ 118 /* f24 f72 */ 119 unsigned char interface; /* rj48c or bnc */ 120 unsigned char coding; /* hdb3 b8zs */ 121 unsigned char lineBuildOut; /* 0, -7.5, -15, -22 */ 122 unsigned char equalizer; /* short or lon haul settings */ 123 unsigned char loopMode; /* various loopbacks */ 124 unsigned char range; /* cable lengths */ 125 unsigned char txBufferMode; /* tx elastic buffer depth */ 126 unsigned char rxBufferMode; /* rx elastic buffer depth */ 127 unsigned char losThreshold; /* Attenuation on LOS signal */ 128 unsigned char idleCode; /* Value to send as idle timeslot */ 129 unsigned int receiveBufferDelay; /* delay thro rx buffer timeslots */ 130 unsigned int framingErrorCount; /* framing errors */ 131 unsigned int codeViolationCount; /* code violations */ 132 unsigned int crcErrorCount; /* CRC errors */ 133 int lineAttenuation; /* in dB*/ 134 unsigned short lossOfSignal; 135 unsigned short receiveRemoteAlarm; 136 unsigned short alarmIndicationSignal; 137 }; 138 139 /* "valid" bitmask */ 140 #define FSTVAL_NONE 0x00000000 /* Nothing valid (firmware not running). 141 * Slight misnomer. In fact nports, 142 * type, state and index will be set 143 * based on hardware detected. 144 */ 145 #define FSTVAL_OMODEM 0x0000001F /* First 5 bits correspond to the 146 * output status bits defined for 147 * v24OpSts 148 */ 149 #define FSTVAL_SPEED 0x00000020 /* internalClock, lineSpeed, clockStatus 150 */ 151 #define FSTVAL_CABLE 0x00000040 /* lineInterface, cableStatus */ 152 #define FSTVAL_IMODEM 0x00000080 /* v24IpSts */ 153 #define FSTVAL_CARD 0x00000100 /* nports, type, state, index, 154 * smcFirmwareVersion 155 */ 156 #define FSTVAL_PROTO 0x00000200 /* proto */ 157 #define FSTVAL_MODE 0x00000400 /* cardMode */ 158 #define FSTVAL_PHASE 0x00000800 /* Clock phase */ 159 #define FSTVAL_TE1 0x00001000 /* T1E1 Configuration */ 160 #define FSTVAL_DEBUG 0x80000000 /* debug */ 161 #define FSTVAL_ALL 0x00001FFF /* Note: does not include DEBUG flag */ 162 163 /* "type" */ 164 #define FST_TYPE_NONE 0 /* Probably should never happen */ 165 #define FST_TYPE_T2P 1 /* T2P X21 2 port card */ 166 #define FST_TYPE_T4P 2 /* T4P X21 4 port card */ 167 #define FST_TYPE_T1U 3 /* T1U X21 1 port card */ 168 #define FST_TYPE_T2U 4 /* T2U X21 2 port card */ 169 #define FST_TYPE_T4U 5 /* T4U X21 4 port card */ 170 #define FST_TYPE_TE1 6 /* T1E1 X21 1 port card */ 171 172 /* "family" */ 173 #define FST_FAMILY_TXP 0 /* T2P or T4P */ 174 #define FST_FAMILY_TXU 1 /* T1U or T2U or T4U */ 175 176 /* "state" */ 177 #define FST_UNINIT 0 /* Raw uninitialised state following 178 * system startup */ 179 #define FST_RESET 1 /* Processor held in reset state */ 180 #define FST_DOWNLOAD 2 /* Card being downloaded */ 181 #define FST_STARTING 3 /* Released following download */ 182 #define FST_RUNNING 4 /* Processor running */ 183 #define FST_BADVERSION 5 /* Bad shared memory version detected */ 184 #define FST_HALTED 6 /* Processor flagged a halt */ 185 #define FST_IFAILED 7 /* Firmware issued initialisation failed 186 * interrupt 187 */ 188 /* "lineInterface" */ 189 #define V24 1 190 #define X21 2 191 #define V35 3 192 #define X21D 4 193 #define T1 5 194 #define E1 6 195 #define J1 7 196 197 /* "proto" */ 198 #define FST_RAW 4 /* Two way raw packets */ 199 #define FST_GEN_HDLC 5 /* Using "Generic HDLC" module */ 200 201 /* "internalClock" */ 202 #define INTCLK 1 203 #define EXTCLK 0 204 205 /* "v24IpSts" bitmask */ 206 #define IPSTS_CTS 0x00000001 /* Clear To Send (Indicate for X.21) */ 207 #define IPSTS_INDICATE IPSTS_CTS 208 #define IPSTS_DSR 0x00000002 /* Data Set Ready (T2P Port A) */ 209 #define IPSTS_DCD 0x00000004 /* Data Carrier Detect */ 210 #define IPSTS_RI 0x00000008 /* Ring Indicator (T2P Port A) */ 211 #define IPSTS_TMI 0x00000010 /* Test Mode Indicator (Not Supported)*/ 212 213 /* "v24OpSts" bitmask */ 214 #define OPSTS_RTS 0x00000001 /* Request To Send (Control for X.21) */ 215 #define OPSTS_CONTROL OPSTS_RTS 216 #define OPSTS_DTR 0x00000002 /* Data Terminal Ready */ 217 #define OPSTS_DSRS 0x00000004 /* Data Signalling Rate Select (Not 218 * Supported) */ 219 #define OPSTS_SS 0x00000008 /* Select Standby (Not Supported) */ 220 #define OPSTS_LL 0x00000010 /* Maintenance Test (Not Supported) */ 221 222 /* "cardMode" bitmask */ 223 #define CARD_MODE_IDENTIFY 0x0001 224 225 /* 226 * Constants for T1/E1 configuration 227 */ 228 229 /* 230 * Clock source 231 */ 232 #define CLOCKING_SLAVE 0 233 #define CLOCKING_MASTER 1 234 235 /* 236 * Framing 237 */ 238 #define FRAMING_E1 0 239 #define FRAMING_J1 1 240 #define FRAMING_T1 2 241 242 /* 243 * Structure 244 */ 245 #define STRUCTURE_UNFRAMED 0 246 #define STRUCTURE_E1_DOUBLE 1 247 #define STRUCTURE_E1_CRC4 2 248 #define STRUCTURE_E1_CRC4M 3 249 #define STRUCTURE_T1_4 4 250 #define STRUCTURE_T1_12 5 251 #define STRUCTURE_T1_24 6 252 #define STRUCTURE_T1_72 7 253 254 /* 255 * Interface 256 */ 257 #define INTERFACE_RJ48C 0 258 #define INTERFACE_BNC 1 259 260 /* 261 * Coding 262 */ 263 264 #define CODING_HDB3 0 265 #define CODING_NRZ 1 266 #define CODING_CMI 2 267 #define CODING_CMI_HDB3 3 268 #define CODING_CMI_B8ZS 4 269 #define CODING_AMI 5 270 #define CODING_AMI_ZCS 6 271 #define CODING_B8ZS 7 272 273 /* 274 * Line Build Out 275 */ 276 #define LBO_0dB 0 277 #define LBO_7dB5 1 278 #define LBO_15dB 2 279 #define LBO_22dB5 3 280 281 /* 282 * Range for long haul t1 > 655ft 283 */ 284 #define RANGE_0_133_FT 0 285 #define RANGE_0_40_M RANGE_0_133_FT 286 #define RANGE_133_266_FT 1 287 #define RANGE_40_81_M RANGE_133_266_FT 288 #define RANGE_266_399_FT 2 289 #define RANGE_81_122_M RANGE_266_399_FT 290 #define RANGE_399_533_FT 3 291 #define RANGE_122_162_M RANGE_399_533_FT 292 #define RANGE_533_655_FT 4 293 #define RANGE_162_200_M RANGE_533_655_FT 294 /* 295 * Receive Equaliser 296 */ 297 #define EQUALIZER_SHORT 0 298 #define EQUALIZER_LONG 1 299 300 /* 301 * Loop modes 302 */ 303 #define LOOP_NONE 0 304 #define LOOP_LOCAL 1 305 #define LOOP_PAYLOAD_EXC_TS0 2 306 #define LOOP_PAYLOAD_INC_TS0 3 307 #define LOOP_REMOTE 4 308 309 /* 310 * Buffer modes 311 */ 312 #define BUFFER_2_FRAME 0 313 #define BUFFER_1_FRAME 1 314 #define BUFFER_96_BIT 2 315 #define BUFFER_NONE 3 316 317 /* Debug support 318 * 319 * These should only be enabled for development kernels, production code 320 * should define FST_DEBUG=0 in order to exclude the code. 321 * Setting FST_DEBUG=1 will include all the debug code but in a disabled 322 * state, use the FSTSETCONF ioctl to enable specific debug actions, or 323 * FST_DEBUG can be set to prime the debug selection. 324 */ 325 #define FST_DEBUG 0x0000 326 #if FST_DEBUG 327 328 extern int fst_debug_mask; /* Bit mask of actions to debug, bits 329 * listed below. Note: Bit 0 is used 330 * to trigger the inclusion of this 331 * code, without enabling any actions. 332 */ 333 #define DBG_INIT 0x0002 /* Card detection and initialisation */ 334 #define DBG_OPEN 0x0004 /* Open and close sequences */ 335 #define DBG_PCI 0x0008 /* PCI config operations */ 336 #define DBG_IOCTL 0x0010 /* Ioctls and other config */ 337 #define DBG_INTR 0x0020 /* Interrupt routines (be careful) */ 338 #define DBG_TX 0x0040 /* Packet transmission */ 339 #define DBG_RX 0x0080 /* Packet reception */ 340 #define DBG_CMD 0x0100 /* Port command issuing */ 341 342 #define DBG_ASS 0xFFFF /* Assert like statements. Code that 343 * should never be reached, if you see 344 * one of these then I've been an ass 345 */ 346 #endif /* FST_DEBUG */ 347 348