xref: /openbmc/linux/drivers/net/usb/usbnet.c (revision eb3fcf00)
1 /*
2  * USB Network driver infrastructure
3  * Copyright (C) 2000-2005 by David Brownell
4  * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or
9  * (at your option) any later version.
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  * GNU General Public License for more details.
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with this program; if not, see <http://www.gnu.org/licenses/>.
18  */
19 
20 /*
21  * This is a generic "USB networking" framework that works with several
22  * kinds of full and high speed networking devices:  host-to-host cables,
23  * smart usb peripherals, and actual Ethernet adapters.
24  *
25  * These devices usually differ in terms of control protocols (if they
26  * even have one!) and sometimes they define new framing to wrap or batch
27  * Ethernet packets.  Otherwise, they talk to USB pretty much the same,
28  * so interface (un)binding, endpoint I/O queues, fault handling, and other
29  * issues can usefully be addressed by this framework.
30  */
31 
32 // #define	DEBUG			// error path messages, extra info
33 // #define	VERBOSE			// more; success messages
34 
35 #include <linux/module.h>
36 #include <linux/init.h>
37 #include <linux/netdevice.h>
38 #include <linux/etherdevice.h>
39 #include <linux/ctype.h>
40 #include <linux/ethtool.h>
41 #include <linux/workqueue.h>
42 #include <linux/mii.h>
43 #include <linux/usb.h>
44 #include <linux/usb/usbnet.h>
45 #include <linux/slab.h>
46 #include <linux/kernel.h>
47 #include <linux/pm_runtime.h>
48 
49 #define DRIVER_VERSION		"22-Aug-2005"
50 
51 
52 /*-------------------------------------------------------------------------*/
53 
54 /*
55  * Nineteen USB 1.1 max size bulk transactions per frame (ms), max.
56  * Several dozen bytes of IPv4 data can fit in two such transactions.
57  * One maximum size Ethernet packet takes twenty four of them.
58  * For high speed, each frame comfortably fits almost 36 max size
59  * Ethernet packets (so queues should be bigger).
60  *
61  * The goal is to let the USB host controller be busy for 5msec or
62  * more before an irq is required, under load.  Jumbograms change
63  * the equation.
64  */
65 #define	MAX_QUEUE_MEMORY	(60 * 1518)
66 #define	RX_QLEN(dev)		((dev)->rx_qlen)
67 #define	TX_QLEN(dev)		((dev)->tx_qlen)
68 
69 // reawaken network queue this soon after stopping; else watchdog barks
70 #define TX_TIMEOUT_JIFFIES	(5*HZ)
71 
72 /* throttle rx/tx briefly after some faults, so hub_wq might disconnect()
73  * us (it polls at HZ/4 usually) before we report too many false errors.
74  */
75 #define THROTTLE_JIFFIES	(HZ/8)
76 
77 // between wakeups
78 #define UNLINK_TIMEOUT_MS	3
79 
80 /*-------------------------------------------------------------------------*/
81 
82 // randomly generated ethernet address
83 static u8	node_id [ETH_ALEN];
84 
85 static const char driver_name [] = "usbnet";
86 
87 /* use ethtool to change the level for any given device */
88 static int msg_level = -1;
89 module_param (msg_level, int, 0);
90 MODULE_PARM_DESC (msg_level, "Override default message level");
91 
92 /*-------------------------------------------------------------------------*/
93 
94 /* handles CDC Ethernet and many other network "bulk data" interfaces */
95 int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)
96 {
97 	int				tmp;
98 	struct usb_host_interface	*alt = NULL;
99 	struct usb_host_endpoint	*in = NULL, *out = NULL;
100 	struct usb_host_endpoint	*status = NULL;
101 
102 	for (tmp = 0; tmp < intf->num_altsetting; tmp++) {
103 		unsigned	ep;
104 
105 		in = out = status = NULL;
106 		alt = intf->altsetting + tmp;
107 
108 		/* take the first altsetting with in-bulk + out-bulk;
109 		 * remember any status endpoint, just in case;
110 		 * ignore other endpoints and altsettings.
111 		 */
112 		for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
113 			struct usb_host_endpoint	*e;
114 			int				intr = 0;
115 
116 			e = alt->endpoint + ep;
117 			switch (e->desc.bmAttributes) {
118 			case USB_ENDPOINT_XFER_INT:
119 				if (!usb_endpoint_dir_in(&e->desc))
120 					continue;
121 				intr = 1;
122 				/* FALLTHROUGH */
123 			case USB_ENDPOINT_XFER_BULK:
124 				break;
125 			default:
126 				continue;
127 			}
128 			if (usb_endpoint_dir_in(&e->desc)) {
129 				if (!intr && !in)
130 					in = e;
131 				else if (intr && !status)
132 					status = e;
133 			} else {
134 				if (!out)
135 					out = e;
136 			}
137 		}
138 		if (in && out)
139 			break;
140 	}
141 	if (!alt || !in || !out)
142 		return -EINVAL;
143 
144 	if (alt->desc.bAlternateSetting != 0 ||
145 	    !(dev->driver_info->flags & FLAG_NO_SETINT)) {
146 		tmp = usb_set_interface (dev->udev, alt->desc.bInterfaceNumber,
147 				alt->desc.bAlternateSetting);
148 		if (tmp < 0)
149 			return tmp;
150 	}
151 
152 	dev->in = usb_rcvbulkpipe (dev->udev,
153 			in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
154 	dev->out = usb_sndbulkpipe (dev->udev,
155 			out->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
156 	dev->status = status;
157 	return 0;
158 }
159 EXPORT_SYMBOL_GPL(usbnet_get_endpoints);
160 
161 int usbnet_get_ethernet_addr(struct usbnet *dev, int iMACAddress)
162 {
163 	int 		tmp = -1, ret;
164 	unsigned char	buf [13];
165 
166 	ret = usb_string(dev->udev, iMACAddress, buf, sizeof buf);
167 	if (ret == 12)
168 		tmp = hex2bin(dev->net->dev_addr, buf, 6);
169 	if (tmp < 0) {
170 		dev_dbg(&dev->udev->dev,
171 			"bad MAC string %d fetch, %d\n", iMACAddress, tmp);
172 		if (ret >= 0)
173 			ret = -EINVAL;
174 		return ret;
175 	}
176 	return 0;
177 }
178 EXPORT_SYMBOL_GPL(usbnet_get_ethernet_addr);
179 
180 static void intr_complete (struct urb *urb)
181 {
182 	struct usbnet	*dev = urb->context;
183 	int		status = urb->status;
184 
185 	switch (status) {
186 	/* success */
187 	case 0:
188 		dev->driver_info->status(dev, urb);
189 		break;
190 
191 	/* software-driven interface shutdown */
192 	case -ENOENT:		/* urb killed */
193 	case -ESHUTDOWN:	/* hardware gone */
194 		netif_dbg(dev, ifdown, dev->net,
195 			  "intr shutdown, code %d\n", status);
196 		return;
197 
198 	/* NOTE:  not throttling like RX/TX, since this endpoint
199 	 * already polls infrequently
200 	 */
201 	default:
202 		netdev_dbg(dev->net, "intr status %d\n", status);
203 		break;
204 	}
205 
206 	status = usb_submit_urb (urb, GFP_ATOMIC);
207 	if (status != 0)
208 		netif_err(dev, timer, dev->net,
209 			  "intr resubmit --> %d\n", status);
210 }
211 
212 static int init_status (struct usbnet *dev, struct usb_interface *intf)
213 {
214 	char		*buf = NULL;
215 	unsigned	pipe = 0;
216 	unsigned	maxp;
217 	unsigned	period;
218 
219 	if (!dev->driver_info->status)
220 		return 0;
221 
222 	pipe = usb_rcvintpipe (dev->udev,
223 			dev->status->desc.bEndpointAddress
224 				& USB_ENDPOINT_NUMBER_MASK);
225 	maxp = usb_maxpacket (dev->udev, pipe, 0);
226 
227 	/* avoid 1 msec chatter:  min 8 msec poll rate */
228 	period = max ((int) dev->status->desc.bInterval,
229 		(dev->udev->speed == USB_SPEED_HIGH) ? 7 : 3);
230 
231 	buf = kmalloc (maxp, GFP_KERNEL);
232 	if (buf) {
233 		dev->interrupt = usb_alloc_urb (0, GFP_KERNEL);
234 		if (!dev->interrupt) {
235 			kfree (buf);
236 			return -ENOMEM;
237 		} else {
238 			usb_fill_int_urb(dev->interrupt, dev->udev, pipe,
239 				buf, maxp, intr_complete, dev, period);
240 			dev->interrupt->transfer_flags |= URB_FREE_BUFFER;
241 			dev_dbg(&intf->dev,
242 				"status ep%din, %d bytes period %d\n",
243 				usb_pipeendpoint(pipe), maxp, period);
244 		}
245 	}
246 	return 0;
247 }
248 
249 /* Submit the interrupt URB if not previously submitted, increasing refcount */
250 int usbnet_status_start(struct usbnet *dev, gfp_t mem_flags)
251 {
252 	int ret = 0;
253 
254 	WARN_ON_ONCE(dev->interrupt == NULL);
255 	if (dev->interrupt) {
256 		mutex_lock(&dev->interrupt_mutex);
257 
258 		if (++dev->interrupt_count == 1)
259 			ret = usb_submit_urb(dev->interrupt, mem_flags);
260 
261 		dev_dbg(&dev->udev->dev, "incremented interrupt URB count to %d\n",
262 			dev->interrupt_count);
263 		mutex_unlock(&dev->interrupt_mutex);
264 	}
265 	return ret;
266 }
267 EXPORT_SYMBOL_GPL(usbnet_status_start);
268 
269 /* For resume; submit interrupt URB if previously submitted */
270 static int __usbnet_status_start_force(struct usbnet *dev, gfp_t mem_flags)
271 {
272 	int ret = 0;
273 
274 	mutex_lock(&dev->interrupt_mutex);
275 	if (dev->interrupt_count) {
276 		ret = usb_submit_urb(dev->interrupt, mem_flags);
277 		dev_dbg(&dev->udev->dev,
278 			"submitted interrupt URB for resume\n");
279 	}
280 	mutex_unlock(&dev->interrupt_mutex);
281 	return ret;
282 }
283 
284 /* Kill the interrupt URB if all submitters want it killed */
285 void usbnet_status_stop(struct usbnet *dev)
286 {
287 	if (dev->interrupt) {
288 		mutex_lock(&dev->interrupt_mutex);
289 		WARN_ON(dev->interrupt_count == 0);
290 
291 		if (dev->interrupt_count && --dev->interrupt_count == 0)
292 			usb_kill_urb(dev->interrupt);
293 
294 		dev_dbg(&dev->udev->dev,
295 			"decremented interrupt URB count to %d\n",
296 			dev->interrupt_count);
297 		mutex_unlock(&dev->interrupt_mutex);
298 	}
299 }
300 EXPORT_SYMBOL_GPL(usbnet_status_stop);
301 
302 /* For suspend; always kill interrupt URB */
303 static void __usbnet_status_stop_force(struct usbnet *dev)
304 {
305 	if (dev->interrupt) {
306 		mutex_lock(&dev->interrupt_mutex);
307 		usb_kill_urb(dev->interrupt);
308 		dev_dbg(&dev->udev->dev, "killed interrupt URB for suspend\n");
309 		mutex_unlock(&dev->interrupt_mutex);
310 	}
311 }
312 
313 /* Passes this packet up the stack, updating its accounting.
314  * Some link protocols batch packets, so their rx_fixup paths
315  * can return clones as well as just modify the original skb.
316  */
317 void usbnet_skb_return (struct usbnet *dev, struct sk_buff *skb)
318 {
319 	int	status;
320 
321 	if (test_bit(EVENT_RX_PAUSED, &dev->flags)) {
322 		skb_queue_tail(&dev->rxq_pause, skb);
323 		return;
324 	}
325 
326 	skb->protocol = eth_type_trans (skb, dev->net);
327 	dev->net->stats.rx_packets++;
328 	dev->net->stats.rx_bytes += skb->len;
329 
330 	netif_dbg(dev, rx_status, dev->net, "< rx, len %zu, type 0x%x\n",
331 		  skb->len + sizeof (struct ethhdr), skb->protocol);
332 	memset (skb->cb, 0, sizeof (struct skb_data));
333 
334 	if (skb_defer_rx_timestamp(skb))
335 		return;
336 
337 	status = netif_rx (skb);
338 	if (status != NET_RX_SUCCESS)
339 		netif_dbg(dev, rx_err, dev->net,
340 			  "netif_rx status %d\n", status);
341 }
342 EXPORT_SYMBOL_GPL(usbnet_skb_return);
343 
344 /* must be called if hard_mtu or rx_urb_size changed */
345 void usbnet_update_max_qlen(struct usbnet *dev)
346 {
347 	enum usb_device_speed speed = dev->udev->speed;
348 
349 	switch (speed) {
350 	case USB_SPEED_HIGH:
351 		dev->rx_qlen = MAX_QUEUE_MEMORY / dev->rx_urb_size;
352 		dev->tx_qlen = MAX_QUEUE_MEMORY / dev->hard_mtu;
353 		break;
354 	case USB_SPEED_SUPER:
355 		/*
356 		 * Not take default 5ms qlen for super speed HC to
357 		 * save memory, and iperf tests show 2.5ms qlen can
358 		 * work well
359 		 */
360 		dev->rx_qlen = 5 * MAX_QUEUE_MEMORY / dev->rx_urb_size;
361 		dev->tx_qlen = 5 * MAX_QUEUE_MEMORY / dev->hard_mtu;
362 		break;
363 	default:
364 		dev->rx_qlen = dev->tx_qlen = 4;
365 	}
366 }
367 EXPORT_SYMBOL_GPL(usbnet_update_max_qlen);
368 
369 
370 /*-------------------------------------------------------------------------
371  *
372  * Network Device Driver (peer link to "Host Device", from USB host)
373  *
374  *-------------------------------------------------------------------------*/
375 
376 int usbnet_change_mtu (struct net_device *net, int new_mtu)
377 {
378 	struct usbnet	*dev = netdev_priv(net);
379 	int		ll_mtu = new_mtu + net->hard_header_len;
380 	int		old_hard_mtu = dev->hard_mtu;
381 	int		old_rx_urb_size = dev->rx_urb_size;
382 
383 	if (new_mtu <= 0)
384 		return -EINVAL;
385 	// no second zero-length packet read wanted after mtu-sized packets
386 	if ((ll_mtu % dev->maxpacket) == 0)
387 		return -EDOM;
388 	net->mtu = new_mtu;
389 
390 	dev->hard_mtu = net->mtu + net->hard_header_len;
391 	if (dev->rx_urb_size == old_hard_mtu) {
392 		dev->rx_urb_size = dev->hard_mtu;
393 		if (dev->rx_urb_size > old_rx_urb_size)
394 			usbnet_unlink_rx_urbs(dev);
395 	}
396 
397 	/* max qlen depend on hard_mtu and rx_urb_size */
398 	usbnet_update_max_qlen(dev);
399 
400 	return 0;
401 }
402 EXPORT_SYMBOL_GPL(usbnet_change_mtu);
403 
404 /* The caller must hold list->lock */
405 static void __usbnet_queue_skb(struct sk_buff_head *list,
406 			struct sk_buff *newsk, enum skb_state state)
407 {
408 	struct skb_data *entry = (struct skb_data *) newsk->cb;
409 
410 	__skb_queue_tail(list, newsk);
411 	entry->state = state;
412 }
413 
414 /*-------------------------------------------------------------------------*/
415 
416 /* some LK 2.4 HCDs oopsed if we freed or resubmitted urbs from
417  * completion callbacks.  2.5 should have fixed those bugs...
418  */
419 
420 static enum skb_state defer_bh(struct usbnet *dev, struct sk_buff *skb,
421 		struct sk_buff_head *list, enum skb_state state)
422 {
423 	unsigned long		flags;
424 	enum skb_state 		old_state;
425 	struct skb_data *entry = (struct skb_data *) skb->cb;
426 
427 	spin_lock_irqsave(&list->lock, flags);
428 	old_state = entry->state;
429 	entry->state = state;
430 	__skb_unlink(skb, list);
431 
432 	/* defer_bh() is never called with list == &dev->done.
433 	 * spin_lock_nested() tells lockdep that it is OK to take
434 	 * dev->done.lock here with list->lock held.
435 	 */
436 	spin_lock_nested(&dev->done.lock, SINGLE_DEPTH_NESTING);
437 
438 	__skb_queue_tail(&dev->done, skb);
439 	if (dev->done.qlen == 1)
440 		tasklet_schedule(&dev->bh);
441 	spin_unlock(&dev->done.lock);
442 	spin_unlock_irqrestore(&list->lock, flags);
443 	return old_state;
444 }
445 
446 /* some work can't be done in tasklets, so we use keventd
447  *
448  * NOTE:  annoying asymmetry:  if it's active, schedule_work() fails,
449  * but tasklet_schedule() doesn't.  hope the failure is rare.
450  */
451 void usbnet_defer_kevent (struct usbnet *dev, int work)
452 {
453 	set_bit (work, &dev->flags);
454 	if (!schedule_work (&dev->kevent)) {
455 		if (net_ratelimit())
456 			netdev_err(dev->net, "kevent %d may have been dropped\n", work);
457 	} else {
458 		netdev_dbg(dev->net, "kevent %d scheduled\n", work);
459 	}
460 }
461 EXPORT_SYMBOL_GPL(usbnet_defer_kevent);
462 
463 /*-------------------------------------------------------------------------*/
464 
465 static void rx_complete (struct urb *urb);
466 
467 static int rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
468 {
469 	struct sk_buff		*skb;
470 	struct skb_data		*entry;
471 	int			retval = 0;
472 	unsigned long		lockflags;
473 	size_t			size = dev->rx_urb_size;
474 
475 	/* prevent rx skb allocation when error ratio is high */
476 	if (test_bit(EVENT_RX_KILL, &dev->flags)) {
477 		usb_free_urb(urb);
478 		return -ENOLINK;
479 	}
480 
481 	skb = __netdev_alloc_skb_ip_align(dev->net, size, flags);
482 	if (!skb) {
483 		netif_dbg(dev, rx_err, dev->net, "no rx skb\n");
484 		usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
485 		usb_free_urb (urb);
486 		return -ENOMEM;
487 	}
488 
489 	entry = (struct skb_data *) skb->cb;
490 	entry->urb = urb;
491 	entry->dev = dev;
492 	entry->length = 0;
493 
494 	usb_fill_bulk_urb (urb, dev->udev, dev->in,
495 		skb->data, size, rx_complete, skb);
496 
497 	spin_lock_irqsave (&dev->rxq.lock, lockflags);
498 
499 	if (netif_running (dev->net) &&
500 	    netif_device_present (dev->net) &&
501 	    !test_bit (EVENT_RX_HALT, &dev->flags) &&
502 	    !test_bit (EVENT_DEV_ASLEEP, &dev->flags)) {
503 		switch (retval = usb_submit_urb (urb, GFP_ATOMIC)) {
504 		case -EPIPE:
505 			usbnet_defer_kevent (dev, EVENT_RX_HALT);
506 			break;
507 		case -ENOMEM:
508 			usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
509 			break;
510 		case -ENODEV:
511 			netif_dbg(dev, ifdown, dev->net, "device gone\n");
512 			netif_device_detach (dev->net);
513 			break;
514 		case -EHOSTUNREACH:
515 			retval = -ENOLINK;
516 			break;
517 		default:
518 			netif_dbg(dev, rx_err, dev->net,
519 				  "rx submit, %d\n", retval);
520 			tasklet_schedule (&dev->bh);
521 			break;
522 		case 0:
523 			__usbnet_queue_skb(&dev->rxq, skb, rx_start);
524 		}
525 	} else {
526 		netif_dbg(dev, ifdown, dev->net, "rx: stopped\n");
527 		retval = -ENOLINK;
528 	}
529 	spin_unlock_irqrestore (&dev->rxq.lock, lockflags);
530 	if (retval) {
531 		dev_kfree_skb_any (skb);
532 		usb_free_urb (urb);
533 	}
534 	return retval;
535 }
536 
537 
538 /*-------------------------------------------------------------------------*/
539 
540 static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
541 {
542 	if (dev->driver_info->rx_fixup &&
543 	    !dev->driver_info->rx_fixup (dev, skb)) {
544 		/* With RX_ASSEMBLE, rx_fixup() must update counters */
545 		if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE))
546 			dev->net->stats.rx_errors++;
547 		goto done;
548 	}
549 	// else network stack removes extra byte if we forced a short packet
550 
551 	/* all data was already cloned from skb inside the driver */
552 	if (dev->driver_info->flags & FLAG_MULTI_PACKET)
553 		goto done;
554 
555 	if (skb->len < ETH_HLEN) {
556 		dev->net->stats.rx_errors++;
557 		dev->net->stats.rx_length_errors++;
558 		netif_dbg(dev, rx_err, dev->net, "rx length %d\n", skb->len);
559 	} else {
560 		usbnet_skb_return(dev, skb);
561 		return;
562 	}
563 
564 done:
565 	skb_queue_tail(&dev->done, skb);
566 }
567 
568 /*-------------------------------------------------------------------------*/
569 
570 static void rx_complete (struct urb *urb)
571 {
572 	struct sk_buff		*skb = (struct sk_buff *) urb->context;
573 	struct skb_data		*entry = (struct skb_data *) skb->cb;
574 	struct usbnet		*dev = entry->dev;
575 	int			urb_status = urb->status;
576 	enum skb_state		state;
577 
578 	skb_put (skb, urb->actual_length);
579 	state = rx_done;
580 	entry->urb = NULL;
581 
582 	switch (urb_status) {
583 	/* success */
584 	case 0:
585 		break;
586 
587 	/* stalls need manual reset. this is rare ... except that
588 	 * when going through USB 2.0 TTs, unplug appears this way.
589 	 * we avoid the highspeed version of the ETIMEDOUT/EILSEQ
590 	 * storm, recovering as needed.
591 	 */
592 	case -EPIPE:
593 		dev->net->stats.rx_errors++;
594 		usbnet_defer_kevent (dev, EVENT_RX_HALT);
595 		// FALLTHROUGH
596 
597 	/* software-driven interface shutdown */
598 	case -ECONNRESET:		/* async unlink */
599 	case -ESHUTDOWN:		/* hardware gone */
600 		netif_dbg(dev, ifdown, dev->net,
601 			  "rx shutdown, code %d\n", urb_status);
602 		goto block;
603 
604 	/* we get controller i/o faults during hub_wq disconnect() delays.
605 	 * throttle down resubmits, to avoid log floods; just temporarily,
606 	 * so we still recover when the fault isn't a hub_wq delay.
607 	 */
608 	case -EPROTO:
609 	case -ETIME:
610 	case -EILSEQ:
611 		dev->net->stats.rx_errors++;
612 		if (!timer_pending (&dev->delay)) {
613 			mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES);
614 			netif_dbg(dev, link, dev->net,
615 				  "rx throttle %d\n", urb_status);
616 		}
617 block:
618 		state = rx_cleanup;
619 		entry->urb = urb;
620 		urb = NULL;
621 		break;
622 
623 	/* data overrun ... flush fifo? */
624 	case -EOVERFLOW:
625 		dev->net->stats.rx_over_errors++;
626 		// FALLTHROUGH
627 
628 	default:
629 		state = rx_cleanup;
630 		dev->net->stats.rx_errors++;
631 		netif_dbg(dev, rx_err, dev->net, "rx status %d\n", urb_status);
632 		break;
633 	}
634 
635 	/* stop rx if packet error rate is high */
636 	if (++dev->pkt_cnt > 30) {
637 		dev->pkt_cnt = 0;
638 		dev->pkt_err = 0;
639 	} else {
640 		if (state == rx_cleanup)
641 			dev->pkt_err++;
642 		if (dev->pkt_err > 20)
643 			set_bit(EVENT_RX_KILL, &dev->flags);
644 	}
645 
646 	state = defer_bh(dev, skb, &dev->rxq, state);
647 
648 	if (urb) {
649 		if (netif_running (dev->net) &&
650 		    !test_bit (EVENT_RX_HALT, &dev->flags) &&
651 		    state != unlink_start) {
652 			rx_submit (dev, urb, GFP_ATOMIC);
653 			usb_mark_last_busy(dev->udev);
654 			return;
655 		}
656 		usb_free_urb (urb);
657 	}
658 	netif_dbg(dev, rx_err, dev->net, "no read resubmitted\n");
659 }
660 
661 /*-------------------------------------------------------------------------*/
662 void usbnet_pause_rx(struct usbnet *dev)
663 {
664 	set_bit(EVENT_RX_PAUSED, &dev->flags);
665 
666 	netif_dbg(dev, rx_status, dev->net, "paused rx queue enabled\n");
667 }
668 EXPORT_SYMBOL_GPL(usbnet_pause_rx);
669 
670 void usbnet_resume_rx(struct usbnet *dev)
671 {
672 	struct sk_buff *skb;
673 	int num = 0;
674 
675 	clear_bit(EVENT_RX_PAUSED, &dev->flags);
676 
677 	while ((skb = skb_dequeue(&dev->rxq_pause)) != NULL) {
678 		usbnet_skb_return(dev, skb);
679 		num++;
680 	}
681 
682 	tasklet_schedule(&dev->bh);
683 
684 	netif_dbg(dev, rx_status, dev->net,
685 		  "paused rx queue disabled, %d skbs requeued\n", num);
686 }
687 EXPORT_SYMBOL_GPL(usbnet_resume_rx);
688 
689 void usbnet_purge_paused_rxq(struct usbnet *dev)
690 {
691 	skb_queue_purge(&dev->rxq_pause);
692 }
693 EXPORT_SYMBOL_GPL(usbnet_purge_paused_rxq);
694 
695 /*-------------------------------------------------------------------------*/
696 
697 // unlink pending rx/tx; completion handlers do all other cleanup
698 
699 static int unlink_urbs (struct usbnet *dev, struct sk_buff_head *q)
700 {
701 	unsigned long		flags;
702 	struct sk_buff		*skb;
703 	int			count = 0;
704 
705 	spin_lock_irqsave (&q->lock, flags);
706 	while (!skb_queue_empty(q)) {
707 		struct skb_data		*entry;
708 		struct urb		*urb;
709 		int			retval;
710 
711 		skb_queue_walk(q, skb) {
712 			entry = (struct skb_data *) skb->cb;
713 			if (entry->state != unlink_start)
714 				goto found;
715 		}
716 		break;
717 found:
718 		entry->state = unlink_start;
719 		urb = entry->urb;
720 
721 		/*
722 		 * Get reference count of the URB to avoid it to be
723 		 * freed during usb_unlink_urb, which may trigger
724 		 * use-after-free problem inside usb_unlink_urb since
725 		 * usb_unlink_urb is always racing with .complete
726 		 * handler(include defer_bh).
727 		 */
728 		usb_get_urb(urb);
729 		spin_unlock_irqrestore(&q->lock, flags);
730 		// during some PM-driven resume scenarios,
731 		// these (async) unlinks complete immediately
732 		retval = usb_unlink_urb (urb);
733 		if (retval != -EINPROGRESS && retval != 0)
734 			netdev_dbg(dev->net, "unlink urb err, %d\n", retval);
735 		else
736 			count++;
737 		usb_put_urb(urb);
738 		spin_lock_irqsave(&q->lock, flags);
739 	}
740 	spin_unlock_irqrestore (&q->lock, flags);
741 	return count;
742 }
743 
744 // Flush all pending rx urbs
745 // minidrivers may need to do this when the MTU changes
746 
747 void usbnet_unlink_rx_urbs(struct usbnet *dev)
748 {
749 	if (netif_running(dev->net)) {
750 		(void) unlink_urbs (dev, &dev->rxq);
751 		tasklet_schedule(&dev->bh);
752 	}
753 }
754 EXPORT_SYMBOL_GPL(usbnet_unlink_rx_urbs);
755 
756 /*-------------------------------------------------------------------------*/
757 
758 static void wait_skb_queue_empty(struct sk_buff_head *q)
759 {
760 	unsigned long flags;
761 
762 	spin_lock_irqsave(&q->lock, flags);
763 	while (!skb_queue_empty(q)) {
764 		spin_unlock_irqrestore(&q->lock, flags);
765 		schedule_timeout(msecs_to_jiffies(UNLINK_TIMEOUT_MS));
766 		set_current_state(TASK_UNINTERRUPTIBLE);
767 		spin_lock_irqsave(&q->lock, flags);
768 	}
769 	spin_unlock_irqrestore(&q->lock, flags);
770 }
771 
772 // precondition: never called in_interrupt
773 static void usbnet_terminate_urbs(struct usbnet *dev)
774 {
775 	DECLARE_WAITQUEUE(wait, current);
776 	int temp;
777 
778 	/* ensure there are no more active urbs */
779 	add_wait_queue(&dev->wait, &wait);
780 	set_current_state(TASK_UNINTERRUPTIBLE);
781 	temp = unlink_urbs(dev, &dev->txq) +
782 		unlink_urbs(dev, &dev->rxq);
783 
784 	/* maybe wait for deletions to finish. */
785 	wait_skb_queue_empty(&dev->rxq);
786 	wait_skb_queue_empty(&dev->txq);
787 	wait_skb_queue_empty(&dev->done);
788 	netif_dbg(dev, ifdown, dev->net,
789 		  "waited for %d urb completions\n", temp);
790 	set_current_state(TASK_RUNNING);
791 	remove_wait_queue(&dev->wait, &wait);
792 }
793 
794 int usbnet_stop (struct net_device *net)
795 {
796 	struct usbnet		*dev = netdev_priv(net);
797 	struct driver_info	*info = dev->driver_info;
798 	int			retval, pm, mpn;
799 
800 	clear_bit(EVENT_DEV_OPEN, &dev->flags);
801 	netif_stop_queue (net);
802 
803 	netif_info(dev, ifdown, dev->net,
804 		   "stop stats: rx/tx %lu/%lu, errs %lu/%lu\n",
805 		   net->stats.rx_packets, net->stats.tx_packets,
806 		   net->stats.rx_errors, net->stats.tx_errors);
807 
808 	/* to not race resume */
809 	pm = usb_autopm_get_interface(dev->intf);
810 	/* allow minidriver to stop correctly (wireless devices to turn off
811 	 * radio etc) */
812 	if (info->stop) {
813 		retval = info->stop(dev);
814 		if (retval < 0)
815 			netif_info(dev, ifdown, dev->net,
816 				   "stop fail (%d) usbnet usb-%s-%s, %s\n",
817 				   retval,
818 				   dev->udev->bus->bus_name, dev->udev->devpath,
819 				   info->description);
820 	}
821 
822 	if (!(info->flags & FLAG_AVOID_UNLINK_URBS))
823 		usbnet_terminate_urbs(dev);
824 
825 	usbnet_status_stop(dev);
826 
827 	usbnet_purge_paused_rxq(dev);
828 
829 	mpn = !test_and_clear_bit(EVENT_NO_RUNTIME_PM, &dev->flags);
830 
831 	/* deferred work (task, timer, softirq) must also stop.
832 	 * can't flush_scheduled_work() until we drop rtnl (later),
833 	 * else workers could deadlock; so make workers a NOP.
834 	 */
835 	dev->flags = 0;
836 	del_timer_sync (&dev->delay);
837 	tasklet_kill (&dev->bh);
838 	if (!pm)
839 		usb_autopm_put_interface(dev->intf);
840 
841 	if (info->manage_power && mpn)
842 		info->manage_power(dev, 0);
843 	else
844 		usb_autopm_put_interface(dev->intf);
845 
846 	return 0;
847 }
848 EXPORT_SYMBOL_GPL(usbnet_stop);
849 
850 /*-------------------------------------------------------------------------*/
851 
852 // posts reads, and enables write queuing
853 
854 // precondition: never called in_interrupt
855 
856 int usbnet_open (struct net_device *net)
857 {
858 	struct usbnet		*dev = netdev_priv(net);
859 	int			retval;
860 	struct driver_info	*info = dev->driver_info;
861 
862 	if ((retval = usb_autopm_get_interface(dev->intf)) < 0) {
863 		netif_info(dev, ifup, dev->net,
864 			   "resumption fail (%d) usbnet usb-%s-%s, %s\n",
865 			   retval,
866 			   dev->udev->bus->bus_name,
867 			   dev->udev->devpath,
868 			   info->description);
869 		goto done_nopm;
870 	}
871 
872 	// put into "known safe" state
873 	if (info->reset && (retval = info->reset (dev)) < 0) {
874 		netif_info(dev, ifup, dev->net,
875 			   "open reset fail (%d) usbnet usb-%s-%s, %s\n",
876 			   retval,
877 			   dev->udev->bus->bus_name,
878 			   dev->udev->devpath,
879 			   info->description);
880 		goto done;
881 	}
882 
883 	/* hard_mtu or rx_urb_size may change in reset() */
884 	usbnet_update_max_qlen(dev);
885 
886 	// insist peer be connected
887 	if (info->check_connect && (retval = info->check_connect (dev)) < 0) {
888 		netif_dbg(dev, ifup, dev->net, "can't open; %d\n", retval);
889 		goto done;
890 	}
891 
892 	/* start any status interrupt transfer */
893 	if (dev->interrupt) {
894 		retval = usbnet_status_start(dev, GFP_KERNEL);
895 		if (retval < 0) {
896 			netif_err(dev, ifup, dev->net,
897 				  "intr submit %d\n", retval);
898 			goto done;
899 		}
900 	}
901 
902 	set_bit(EVENT_DEV_OPEN, &dev->flags);
903 	netif_start_queue (net);
904 	netif_info(dev, ifup, dev->net,
905 		   "open: enable queueing (rx %d, tx %d) mtu %d %s framing\n",
906 		   (int)RX_QLEN(dev), (int)TX_QLEN(dev),
907 		   dev->net->mtu,
908 		   (dev->driver_info->flags & FLAG_FRAMING_NC) ? "NetChip" :
909 		   (dev->driver_info->flags & FLAG_FRAMING_GL) ? "GeneSys" :
910 		   (dev->driver_info->flags & FLAG_FRAMING_Z) ? "Zaurus" :
911 		   (dev->driver_info->flags & FLAG_FRAMING_RN) ? "RNDIS" :
912 		   (dev->driver_info->flags & FLAG_FRAMING_AX) ? "ASIX" :
913 		   "simple");
914 
915 	/* reset rx error state */
916 	dev->pkt_cnt = 0;
917 	dev->pkt_err = 0;
918 	clear_bit(EVENT_RX_KILL, &dev->flags);
919 
920 	// delay posting reads until we're fully open
921 	tasklet_schedule (&dev->bh);
922 	if (info->manage_power) {
923 		retval = info->manage_power(dev, 1);
924 		if (retval < 0) {
925 			retval = 0;
926 			set_bit(EVENT_NO_RUNTIME_PM, &dev->flags);
927 		} else {
928 			usb_autopm_put_interface(dev->intf);
929 		}
930 	}
931 	return retval;
932 done:
933 	usb_autopm_put_interface(dev->intf);
934 done_nopm:
935 	return retval;
936 }
937 EXPORT_SYMBOL_GPL(usbnet_open);
938 
939 /*-------------------------------------------------------------------------*/
940 
941 /* ethtool methods; minidrivers may need to add some more, but
942  * they'll probably want to use this base set.
943  */
944 
945 int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd)
946 {
947 	struct usbnet *dev = netdev_priv(net);
948 
949 	if (!dev->mii.mdio_read)
950 		return -EOPNOTSUPP;
951 
952 	return mii_ethtool_gset(&dev->mii, cmd);
953 }
954 EXPORT_SYMBOL_GPL(usbnet_get_settings);
955 
956 int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd)
957 {
958 	struct usbnet *dev = netdev_priv(net);
959 	int retval;
960 
961 	if (!dev->mii.mdio_write)
962 		return -EOPNOTSUPP;
963 
964 	retval = mii_ethtool_sset(&dev->mii, cmd);
965 
966 	/* link speed/duplex might have changed */
967 	if (dev->driver_info->link_reset)
968 		dev->driver_info->link_reset(dev);
969 
970 	/* hard_mtu or rx_urb_size may change in link_reset() */
971 	usbnet_update_max_qlen(dev);
972 
973 	return retval;
974 
975 }
976 EXPORT_SYMBOL_GPL(usbnet_set_settings);
977 
978 u32 usbnet_get_link (struct net_device *net)
979 {
980 	struct usbnet *dev = netdev_priv(net);
981 
982 	/* If a check_connect is defined, return its result */
983 	if (dev->driver_info->check_connect)
984 		return dev->driver_info->check_connect (dev) == 0;
985 
986 	/* if the device has mii operations, use those */
987 	if (dev->mii.mdio_read)
988 		return mii_link_ok(&dev->mii);
989 
990 	/* Otherwise, dtrt for drivers calling netif_carrier_{on,off} */
991 	return ethtool_op_get_link(net);
992 }
993 EXPORT_SYMBOL_GPL(usbnet_get_link);
994 
995 int usbnet_nway_reset(struct net_device *net)
996 {
997 	struct usbnet *dev = netdev_priv(net);
998 
999 	if (!dev->mii.mdio_write)
1000 		return -EOPNOTSUPP;
1001 
1002 	return mii_nway_restart(&dev->mii);
1003 }
1004 EXPORT_SYMBOL_GPL(usbnet_nway_reset);
1005 
1006 void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
1007 {
1008 	struct usbnet *dev = netdev_priv(net);
1009 
1010 	strlcpy (info->driver, dev->driver_name, sizeof info->driver);
1011 	strlcpy (info->version, DRIVER_VERSION, sizeof info->version);
1012 	strlcpy (info->fw_version, dev->driver_info->description,
1013 		sizeof info->fw_version);
1014 	usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
1015 }
1016 EXPORT_SYMBOL_GPL(usbnet_get_drvinfo);
1017 
1018 u32 usbnet_get_msglevel (struct net_device *net)
1019 {
1020 	struct usbnet *dev = netdev_priv(net);
1021 
1022 	return dev->msg_enable;
1023 }
1024 EXPORT_SYMBOL_GPL(usbnet_get_msglevel);
1025 
1026 void usbnet_set_msglevel (struct net_device *net, u32 level)
1027 {
1028 	struct usbnet *dev = netdev_priv(net);
1029 
1030 	dev->msg_enable = level;
1031 }
1032 EXPORT_SYMBOL_GPL(usbnet_set_msglevel);
1033 
1034 /* drivers may override default ethtool_ops in their bind() routine */
1035 static const struct ethtool_ops usbnet_ethtool_ops = {
1036 	.get_settings		= usbnet_get_settings,
1037 	.set_settings		= usbnet_set_settings,
1038 	.get_link		= usbnet_get_link,
1039 	.nway_reset		= usbnet_nway_reset,
1040 	.get_drvinfo		= usbnet_get_drvinfo,
1041 	.get_msglevel		= usbnet_get_msglevel,
1042 	.set_msglevel		= usbnet_set_msglevel,
1043 	.get_ts_info		= ethtool_op_get_ts_info,
1044 };
1045 
1046 /*-------------------------------------------------------------------------*/
1047 
1048 static void __handle_link_change(struct usbnet *dev)
1049 {
1050 	if (!test_bit(EVENT_DEV_OPEN, &dev->flags))
1051 		return;
1052 
1053 	if (!netif_carrier_ok(dev->net)) {
1054 		/* kill URBs for reading packets to save bus bandwidth */
1055 		unlink_urbs(dev, &dev->rxq);
1056 
1057 		/*
1058 		 * tx_timeout will unlink URBs for sending packets and
1059 		 * tx queue is stopped by netcore after link becomes off
1060 		 */
1061 	} else {
1062 		/* submitting URBs for reading packets */
1063 		tasklet_schedule(&dev->bh);
1064 	}
1065 
1066 	/* hard_mtu or rx_urb_size may change during link change */
1067 	usbnet_update_max_qlen(dev);
1068 
1069 	clear_bit(EVENT_LINK_CHANGE, &dev->flags);
1070 }
1071 
1072 static void usbnet_set_rx_mode(struct net_device *net)
1073 {
1074 	struct usbnet		*dev = netdev_priv(net);
1075 
1076 	usbnet_defer_kevent(dev, EVENT_SET_RX_MODE);
1077 }
1078 
1079 static void __handle_set_rx_mode(struct usbnet *dev)
1080 {
1081 	if (dev->driver_info->set_rx_mode)
1082 		(dev->driver_info->set_rx_mode)(dev);
1083 
1084 	clear_bit(EVENT_SET_RX_MODE, &dev->flags);
1085 }
1086 
1087 /* work that cannot be done in interrupt context uses keventd.
1088  *
1089  * NOTE:  with 2.5 we could do more of this using completion callbacks,
1090  * especially now that control transfers can be queued.
1091  */
1092 static void
1093 usbnet_deferred_kevent (struct work_struct *work)
1094 {
1095 	struct usbnet		*dev =
1096 		container_of(work, struct usbnet, kevent);
1097 	int			status;
1098 
1099 	/* usb_clear_halt() needs a thread context */
1100 	if (test_bit (EVENT_TX_HALT, &dev->flags)) {
1101 		unlink_urbs (dev, &dev->txq);
1102 		status = usb_autopm_get_interface(dev->intf);
1103 		if (status < 0)
1104 			goto fail_pipe;
1105 		status = usb_clear_halt (dev->udev, dev->out);
1106 		usb_autopm_put_interface(dev->intf);
1107 		if (status < 0 &&
1108 		    status != -EPIPE &&
1109 		    status != -ESHUTDOWN) {
1110 			if (netif_msg_tx_err (dev))
1111 fail_pipe:
1112 				netdev_err(dev->net, "can't clear tx halt, status %d\n",
1113 					   status);
1114 		} else {
1115 			clear_bit (EVENT_TX_HALT, &dev->flags);
1116 			if (status != -ESHUTDOWN)
1117 				netif_wake_queue (dev->net);
1118 		}
1119 	}
1120 	if (test_bit (EVENT_RX_HALT, &dev->flags)) {
1121 		unlink_urbs (dev, &dev->rxq);
1122 		status = usb_autopm_get_interface(dev->intf);
1123 		if (status < 0)
1124 			goto fail_halt;
1125 		status = usb_clear_halt (dev->udev, dev->in);
1126 		usb_autopm_put_interface(dev->intf);
1127 		if (status < 0 &&
1128 		    status != -EPIPE &&
1129 		    status != -ESHUTDOWN) {
1130 			if (netif_msg_rx_err (dev))
1131 fail_halt:
1132 				netdev_err(dev->net, "can't clear rx halt, status %d\n",
1133 					   status);
1134 		} else {
1135 			clear_bit (EVENT_RX_HALT, &dev->flags);
1136 			tasklet_schedule (&dev->bh);
1137 		}
1138 	}
1139 
1140 	/* tasklet could resubmit itself forever if memory is tight */
1141 	if (test_bit (EVENT_RX_MEMORY, &dev->flags)) {
1142 		struct urb	*urb = NULL;
1143 		int resched = 1;
1144 
1145 		if (netif_running (dev->net))
1146 			urb = usb_alloc_urb (0, GFP_KERNEL);
1147 		else
1148 			clear_bit (EVENT_RX_MEMORY, &dev->flags);
1149 		if (urb != NULL) {
1150 			clear_bit (EVENT_RX_MEMORY, &dev->flags);
1151 			status = usb_autopm_get_interface(dev->intf);
1152 			if (status < 0) {
1153 				usb_free_urb(urb);
1154 				goto fail_lowmem;
1155 			}
1156 			if (rx_submit (dev, urb, GFP_KERNEL) == -ENOLINK)
1157 				resched = 0;
1158 			usb_autopm_put_interface(dev->intf);
1159 fail_lowmem:
1160 			if (resched)
1161 				tasklet_schedule (&dev->bh);
1162 		}
1163 	}
1164 
1165 	if (test_bit (EVENT_LINK_RESET, &dev->flags)) {
1166 		struct driver_info	*info = dev->driver_info;
1167 		int			retval = 0;
1168 
1169 		clear_bit (EVENT_LINK_RESET, &dev->flags);
1170 		status = usb_autopm_get_interface(dev->intf);
1171 		if (status < 0)
1172 			goto skip_reset;
1173 		if(info->link_reset && (retval = info->link_reset(dev)) < 0) {
1174 			usb_autopm_put_interface(dev->intf);
1175 skip_reset:
1176 			netdev_info(dev->net, "link reset failed (%d) usbnet usb-%s-%s, %s\n",
1177 				    retval,
1178 				    dev->udev->bus->bus_name,
1179 				    dev->udev->devpath,
1180 				    info->description);
1181 		} else {
1182 			usb_autopm_put_interface(dev->intf);
1183 		}
1184 
1185 		/* handle link change from link resetting */
1186 		__handle_link_change(dev);
1187 	}
1188 
1189 	if (test_bit (EVENT_LINK_CHANGE, &dev->flags))
1190 		__handle_link_change(dev);
1191 
1192 	if (test_bit (EVENT_SET_RX_MODE, &dev->flags))
1193 		__handle_set_rx_mode(dev);
1194 
1195 
1196 	if (dev->flags)
1197 		netdev_dbg(dev->net, "kevent done, flags = 0x%lx\n", dev->flags);
1198 }
1199 
1200 /*-------------------------------------------------------------------------*/
1201 
1202 static void tx_complete (struct urb *urb)
1203 {
1204 	struct sk_buff		*skb = (struct sk_buff *) urb->context;
1205 	struct skb_data		*entry = (struct skb_data *) skb->cb;
1206 	struct usbnet		*dev = entry->dev;
1207 
1208 	if (urb->status == 0) {
1209 		dev->net->stats.tx_packets += entry->packets;
1210 		dev->net->stats.tx_bytes += entry->length;
1211 	} else {
1212 		dev->net->stats.tx_errors++;
1213 
1214 		switch (urb->status) {
1215 		case -EPIPE:
1216 			usbnet_defer_kevent (dev, EVENT_TX_HALT);
1217 			break;
1218 
1219 		/* software-driven interface shutdown */
1220 		case -ECONNRESET:		// async unlink
1221 		case -ESHUTDOWN:		// hardware gone
1222 			break;
1223 
1224 		/* like rx, tx gets controller i/o faults during hub_wq
1225 		 * delays and so it uses the same throttling mechanism.
1226 		 */
1227 		case -EPROTO:
1228 		case -ETIME:
1229 		case -EILSEQ:
1230 			usb_mark_last_busy(dev->udev);
1231 			if (!timer_pending (&dev->delay)) {
1232 				mod_timer (&dev->delay,
1233 					jiffies + THROTTLE_JIFFIES);
1234 				netif_dbg(dev, link, dev->net,
1235 					  "tx throttle %d\n", urb->status);
1236 			}
1237 			netif_stop_queue (dev->net);
1238 			break;
1239 		default:
1240 			netif_dbg(dev, tx_err, dev->net,
1241 				  "tx err %d\n", entry->urb->status);
1242 			break;
1243 		}
1244 	}
1245 
1246 	usb_autopm_put_interface_async(dev->intf);
1247 	(void) defer_bh(dev, skb, &dev->txq, tx_done);
1248 }
1249 
1250 /*-------------------------------------------------------------------------*/
1251 
1252 void usbnet_tx_timeout (struct net_device *net)
1253 {
1254 	struct usbnet		*dev = netdev_priv(net);
1255 
1256 	unlink_urbs (dev, &dev->txq);
1257 	tasklet_schedule (&dev->bh);
1258 	/* this needs to be handled individually because the generic layer
1259 	 * doesn't know what is sufficient and could not restore private
1260 	 * information if a remedy of an unconditional reset were used.
1261 	 */
1262 	if (dev->driver_info->recover)
1263 		(dev->driver_info->recover)(dev);
1264 }
1265 EXPORT_SYMBOL_GPL(usbnet_tx_timeout);
1266 
1267 /*-------------------------------------------------------------------------*/
1268 
1269 static int build_dma_sg(const struct sk_buff *skb, struct urb *urb)
1270 {
1271 	unsigned num_sgs, total_len = 0;
1272 	int i, s = 0;
1273 
1274 	num_sgs = skb_shinfo(skb)->nr_frags + 1;
1275 	if (num_sgs == 1)
1276 		return 0;
1277 
1278 	/* reserve one for zero packet */
1279 	urb->sg = kmalloc((num_sgs + 1) * sizeof(struct scatterlist),
1280 			  GFP_ATOMIC);
1281 	if (!urb->sg)
1282 		return -ENOMEM;
1283 
1284 	urb->num_sgs = num_sgs;
1285 	sg_init_table(urb->sg, urb->num_sgs + 1);
1286 
1287 	sg_set_buf(&urb->sg[s++], skb->data, skb_headlen(skb));
1288 	total_len += skb_headlen(skb);
1289 
1290 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
1291 		struct skb_frag_struct *f = &skb_shinfo(skb)->frags[i];
1292 
1293 		total_len += skb_frag_size(f);
1294 		sg_set_page(&urb->sg[i + s], f->page.p, f->size,
1295 				f->page_offset);
1296 	}
1297 	urb->transfer_buffer_length = total_len;
1298 
1299 	return 1;
1300 }
1301 
1302 netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
1303 				     struct net_device *net)
1304 {
1305 	struct usbnet		*dev = netdev_priv(net);
1306 	unsigned int			length;
1307 	struct urb		*urb = NULL;
1308 	struct skb_data		*entry;
1309 	struct driver_info	*info = dev->driver_info;
1310 	unsigned long		flags;
1311 	int retval;
1312 
1313 	if (skb)
1314 		skb_tx_timestamp(skb);
1315 
1316 	// some devices want funky USB-level framing, for
1317 	// win32 driver (usually) and/or hardware quirks
1318 	if (info->tx_fixup) {
1319 		skb = info->tx_fixup (dev, skb, GFP_ATOMIC);
1320 		if (!skb) {
1321 			/* packet collected; minidriver waiting for more */
1322 			if (info->flags & FLAG_MULTI_PACKET)
1323 				goto not_drop;
1324 			netif_dbg(dev, tx_err, dev->net, "can't tx_fixup skb\n");
1325 			goto drop;
1326 		}
1327 	}
1328 
1329 	if (!(urb = usb_alloc_urb (0, GFP_ATOMIC))) {
1330 		netif_dbg(dev, tx_err, dev->net, "no urb\n");
1331 		goto drop;
1332 	}
1333 
1334 	entry = (struct skb_data *) skb->cb;
1335 	entry->urb = urb;
1336 	entry->dev = dev;
1337 
1338 	usb_fill_bulk_urb (urb, dev->udev, dev->out,
1339 			skb->data, skb->len, tx_complete, skb);
1340 	if (dev->can_dma_sg) {
1341 		if (build_dma_sg(skb, urb) < 0)
1342 			goto drop;
1343 	}
1344 	length = urb->transfer_buffer_length;
1345 
1346 	/* don't assume the hardware handles USB_ZERO_PACKET
1347 	 * NOTE:  strictly conforming cdc-ether devices should expect
1348 	 * the ZLP here, but ignore the one-byte packet.
1349 	 * NOTE2: CDC NCM specification is different from CDC ECM when
1350 	 * handling ZLP/short packets, so cdc_ncm driver will make short
1351 	 * packet itself if needed.
1352 	 */
1353 	if (length % dev->maxpacket == 0) {
1354 		if (!(info->flags & FLAG_SEND_ZLP)) {
1355 			if (!(info->flags & FLAG_MULTI_PACKET)) {
1356 				length++;
1357 				if (skb_tailroom(skb) && !urb->num_sgs) {
1358 					skb->data[skb->len] = 0;
1359 					__skb_put(skb, 1);
1360 				} else if (urb->num_sgs)
1361 					sg_set_buf(&urb->sg[urb->num_sgs++],
1362 							dev->padding_pkt, 1);
1363 			}
1364 		} else
1365 			urb->transfer_flags |= URB_ZERO_PACKET;
1366 	}
1367 	urb->transfer_buffer_length = length;
1368 
1369 	if (info->flags & FLAG_MULTI_PACKET) {
1370 		/* Driver has set number of packets and a length delta.
1371 		 * Calculate the complete length and ensure that it's
1372 		 * positive.
1373 		 */
1374 		entry->length += length;
1375 		if (WARN_ON_ONCE(entry->length <= 0))
1376 			entry->length = length;
1377 	} else {
1378 		usbnet_set_skb_tx_stats(skb, 1, length);
1379 	}
1380 
1381 	spin_lock_irqsave(&dev->txq.lock, flags);
1382 	retval = usb_autopm_get_interface_async(dev->intf);
1383 	if (retval < 0) {
1384 		spin_unlock_irqrestore(&dev->txq.lock, flags);
1385 		goto drop;
1386 	}
1387 
1388 #ifdef CONFIG_PM
1389 	/* if this triggers the device is still a sleep */
1390 	if (test_bit(EVENT_DEV_ASLEEP, &dev->flags)) {
1391 		/* transmission will be done in resume */
1392 		usb_anchor_urb(urb, &dev->deferred);
1393 		/* no use to process more packets */
1394 		netif_stop_queue(net);
1395 		usb_put_urb(urb);
1396 		spin_unlock_irqrestore(&dev->txq.lock, flags);
1397 		netdev_dbg(dev->net, "Delaying transmission for resumption\n");
1398 		goto deferred;
1399 	}
1400 #endif
1401 
1402 	switch ((retval = usb_submit_urb (urb, GFP_ATOMIC))) {
1403 	case -EPIPE:
1404 		netif_stop_queue (net);
1405 		usbnet_defer_kevent (dev, EVENT_TX_HALT);
1406 		usb_autopm_put_interface_async(dev->intf);
1407 		break;
1408 	default:
1409 		usb_autopm_put_interface_async(dev->intf);
1410 		netif_dbg(dev, tx_err, dev->net,
1411 			  "tx: submit urb err %d\n", retval);
1412 		break;
1413 	case 0:
1414 		net->trans_start = jiffies;
1415 		__usbnet_queue_skb(&dev->txq, skb, tx_start);
1416 		if (dev->txq.qlen >= TX_QLEN (dev))
1417 			netif_stop_queue (net);
1418 	}
1419 	spin_unlock_irqrestore (&dev->txq.lock, flags);
1420 
1421 	if (retval) {
1422 		netif_dbg(dev, tx_err, dev->net, "drop, code %d\n", retval);
1423 drop:
1424 		dev->net->stats.tx_dropped++;
1425 not_drop:
1426 		if (skb)
1427 			dev_kfree_skb_any (skb);
1428 		if (urb) {
1429 			kfree(urb->sg);
1430 			usb_free_urb(urb);
1431 		}
1432 	} else
1433 		netif_dbg(dev, tx_queued, dev->net,
1434 			  "> tx, len %u, type 0x%x\n", length, skb->protocol);
1435 #ifdef CONFIG_PM
1436 deferred:
1437 #endif
1438 	return NETDEV_TX_OK;
1439 }
1440 EXPORT_SYMBOL_GPL(usbnet_start_xmit);
1441 
1442 static int rx_alloc_submit(struct usbnet *dev, gfp_t flags)
1443 {
1444 	struct urb	*urb;
1445 	int		i;
1446 	int		ret = 0;
1447 
1448 	/* don't refill the queue all at once */
1449 	for (i = 0; i < 10 && dev->rxq.qlen < RX_QLEN(dev); i++) {
1450 		urb = usb_alloc_urb(0, flags);
1451 		if (urb != NULL) {
1452 			ret = rx_submit(dev, urb, flags);
1453 			if (ret)
1454 				goto err;
1455 		} else {
1456 			ret = -ENOMEM;
1457 			goto err;
1458 		}
1459 	}
1460 err:
1461 	return ret;
1462 }
1463 
1464 /*-------------------------------------------------------------------------*/
1465 
1466 // tasklet (work deferred from completions, in_irq) or timer
1467 
1468 static void usbnet_bh (unsigned long param)
1469 {
1470 	struct usbnet		*dev = (struct usbnet *) param;
1471 	struct sk_buff		*skb;
1472 	struct skb_data		*entry;
1473 
1474 	while ((skb = skb_dequeue (&dev->done))) {
1475 		entry = (struct skb_data *) skb->cb;
1476 		switch (entry->state) {
1477 		case rx_done:
1478 			entry->state = rx_cleanup;
1479 			rx_process (dev, skb);
1480 			continue;
1481 		case tx_done:
1482 			kfree(entry->urb->sg);
1483 		case rx_cleanup:
1484 			usb_free_urb (entry->urb);
1485 			dev_kfree_skb (skb);
1486 			continue;
1487 		default:
1488 			netdev_dbg(dev->net, "bogus skb state %d\n", entry->state);
1489 		}
1490 	}
1491 
1492 	/* restart RX again after disabling due to high error rate */
1493 	clear_bit(EVENT_RX_KILL, &dev->flags);
1494 
1495 	/* waiting for all pending urbs to complete?
1496 	 * only then can we forgo submitting anew
1497 	 */
1498 	if (waitqueue_active(&dev->wait)) {
1499 		if (dev->txq.qlen + dev->rxq.qlen + dev->done.qlen == 0)
1500 			wake_up_all(&dev->wait);
1501 
1502 	// or are we maybe short a few urbs?
1503 	} else if (netif_running (dev->net) &&
1504 		   netif_device_present (dev->net) &&
1505 		   netif_carrier_ok(dev->net) &&
1506 		   !timer_pending (&dev->delay) &&
1507 		   !test_bit (EVENT_RX_HALT, &dev->flags)) {
1508 		int	temp = dev->rxq.qlen;
1509 
1510 		if (temp < RX_QLEN(dev)) {
1511 			if (rx_alloc_submit(dev, GFP_ATOMIC) == -ENOLINK)
1512 				return;
1513 			if (temp != dev->rxq.qlen)
1514 				netif_dbg(dev, link, dev->net,
1515 					  "rxqlen %d --> %d\n",
1516 					  temp, dev->rxq.qlen);
1517 			if (dev->rxq.qlen < RX_QLEN(dev))
1518 				tasklet_schedule (&dev->bh);
1519 		}
1520 		if (dev->txq.qlen < TX_QLEN (dev))
1521 			netif_wake_queue (dev->net);
1522 	}
1523 }
1524 
1525 
1526 /*-------------------------------------------------------------------------
1527  *
1528  * USB Device Driver support
1529  *
1530  *-------------------------------------------------------------------------*/
1531 
1532 // precondition: never called in_interrupt
1533 
1534 void usbnet_disconnect (struct usb_interface *intf)
1535 {
1536 	struct usbnet		*dev;
1537 	struct usb_device	*xdev;
1538 	struct net_device	*net;
1539 
1540 	dev = usb_get_intfdata(intf);
1541 	usb_set_intfdata(intf, NULL);
1542 	if (!dev)
1543 		return;
1544 
1545 	xdev = interface_to_usbdev (intf);
1546 
1547 	netif_info(dev, probe, dev->net, "unregister '%s' usb-%s-%s, %s\n",
1548 		   intf->dev.driver->name,
1549 		   xdev->bus->bus_name, xdev->devpath,
1550 		   dev->driver_info->description);
1551 
1552 	net = dev->net;
1553 	unregister_netdev (net);
1554 
1555 	cancel_work_sync(&dev->kevent);
1556 
1557 	usb_scuttle_anchored_urbs(&dev->deferred);
1558 
1559 	if (dev->driver_info->unbind)
1560 		dev->driver_info->unbind (dev, intf);
1561 
1562 	usb_kill_urb(dev->interrupt);
1563 	usb_free_urb(dev->interrupt);
1564 	kfree(dev->padding_pkt);
1565 
1566 	free_netdev(net);
1567 }
1568 EXPORT_SYMBOL_GPL(usbnet_disconnect);
1569 
1570 static const struct net_device_ops usbnet_netdev_ops = {
1571 	.ndo_open		= usbnet_open,
1572 	.ndo_stop		= usbnet_stop,
1573 	.ndo_start_xmit		= usbnet_start_xmit,
1574 	.ndo_tx_timeout		= usbnet_tx_timeout,
1575 	.ndo_set_rx_mode	= usbnet_set_rx_mode,
1576 	.ndo_change_mtu		= usbnet_change_mtu,
1577 	.ndo_set_mac_address 	= eth_mac_addr,
1578 	.ndo_validate_addr	= eth_validate_addr,
1579 };
1580 
1581 /*-------------------------------------------------------------------------*/
1582 
1583 // precondition: never called in_interrupt
1584 
1585 static struct device_type wlan_type = {
1586 	.name	= "wlan",
1587 };
1588 
1589 static struct device_type wwan_type = {
1590 	.name	= "wwan",
1591 };
1592 
1593 int
1594 usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
1595 {
1596 	struct usbnet			*dev;
1597 	struct net_device		*net;
1598 	struct usb_host_interface	*interface;
1599 	struct driver_info		*info;
1600 	struct usb_device		*xdev;
1601 	int				status;
1602 	const char			*name;
1603 	struct usb_driver 	*driver = to_usb_driver(udev->dev.driver);
1604 
1605 	/* usbnet already took usb runtime pm, so have to enable the feature
1606 	 * for usb interface, otherwise usb_autopm_get_interface may return
1607 	 * failure if RUNTIME_PM is enabled.
1608 	 */
1609 	if (!driver->supports_autosuspend) {
1610 		driver->supports_autosuspend = 1;
1611 		pm_runtime_enable(&udev->dev);
1612 	}
1613 
1614 	name = udev->dev.driver->name;
1615 	info = (struct driver_info *) prod->driver_info;
1616 	if (!info) {
1617 		dev_dbg (&udev->dev, "blacklisted by %s\n", name);
1618 		return -ENODEV;
1619 	}
1620 	xdev = interface_to_usbdev (udev);
1621 	interface = udev->cur_altsetting;
1622 
1623 	status = -ENOMEM;
1624 
1625 	// set up our own records
1626 	net = alloc_etherdev(sizeof(*dev));
1627 	if (!net)
1628 		goto out;
1629 
1630 	/* netdev_printk() needs this so do it as early as possible */
1631 	SET_NETDEV_DEV(net, &udev->dev);
1632 
1633 	dev = netdev_priv(net);
1634 	dev->udev = xdev;
1635 	dev->intf = udev;
1636 	dev->driver_info = info;
1637 	dev->driver_name = name;
1638 	dev->msg_enable = netif_msg_init (msg_level, NETIF_MSG_DRV
1639 				| NETIF_MSG_PROBE | NETIF_MSG_LINK);
1640 	init_waitqueue_head(&dev->wait);
1641 	skb_queue_head_init (&dev->rxq);
1642 	skb_queue_head_init (&dev->txq);
1643 	skb_queue_head_init (&dev->done);
1644 	skb_queue_head_init(&dev->rxq_pause);
1645 	dev->bh.func = usbnet_bh;
1646 	dev->bh.data = (unsigned long) dev;
1647 	INIT_WORK (&dev->kevent, usbnet_deferred_kevent);
1648 	init_usb_anchor(&dev->deferred);
1649 	dev->delay.function = usbnet_bh;
1650 	dev->delay.data = (unsigned long) dev;
1651 	init_timer (&dev->delay);
1652 	mutex_init (&dev->phy_mutex);
1653 	mutex_init(&dev->interrupt_mutex);
1654 	dev->interrupt_count = 0;
1655 
1656 	dev->net = net;
1657 	strcpy (net->name, "usb%d");
1658 	memcpy (net->dev_addr, node_id, sizeof node_id);
1659 
1660 	/* rx and tx sides can use different message sizes;
1661 	 * bind() should set rx_urb_size in that case.
1662 	 */
1663 	dev->hard_mtu = net->mtu + net->hard_header_len;
1664 #if 0
1665 // dma_supported() is deeply broken on almost all architectures
1666 	// possible with some EHCI controllers
1667 	if (dma_supported (&udev->dev, DMA_BIT_MASK(64)))
1668 		net->features |= NETIF_F_HIGHDMA;
1669 #endif
1670 
1671 	net->netdev_ops = &usbnet_netdev_ops;
1672 	net->watchdog_timeo = TX_TIMEOUT_JIFFIES;
1673 	net->ethtool_ops = &usbnet_ethtool_ops;
1674 
1675 	// allow device-specific bind/init procedures
1676 	// NOTE net->name still not usable ...
1677 	if (info->bind) {
1678 		status = info->bind (dev, udev);
1679 		if (status < 0)
1680 			goto out1;
1681 
1682 		// heuristic:  "usb%d" for links we know are two-host,
1683 		// else "eth%d" when there's reasonable doubt.  userspace
1684 		// can rename the link if it knows better.
1685 		if ((dev->driver_info->flags & FLAG_ETHER) != 0 &&
1686 		    ((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 ||
1687 		     (net->dev_addr [0] & 0x02) == 0))
1688 			strcpy (net->name, "eth%d");
1689 		/* WLAN devices should always be named "wlan%d" */
1690 		if ((dev->driver_info->flags & FLAG_WLAN) != 0)
1691 			strcpy(net->name, "wlan%d");
1692 		/* WWAN devices should always be named "wwan%d" */
1693 		if ((dev->driver_info->flags & FLAG_WWAN) != 0)
1694 			strcpy(net->name, "wwan%d");
1695 
1696 		/* devices that cannot do ARP */
1697 		if ((dev->driver_info->flags & FLAG_NOARP) != 0)
1698 			net->flags |= IFF_NOARP;
1699 
1700 		/* maybe the remote can't receive an Ethernet MTU */
1701 		if (net->mtu > (dev->hard_mtu - net->hard_header_len))
1702 			net->mtu = dev->hard_mtu - net->hard_header_len;
1703 	} else if (!info->in || !info->out)
1704 		status = usbnet_get_endpoints (dev, udev);
1705 	else {
1706 		dev->in = usb_rcvbulkpipe (xdev, info->in);
1707 		dev->out = usb_sndbulkpipe (xdev, info->out);
1708 		if (!(info->flags & FLAG_NO_SETINT))
1709 			status = usb_set_interface (xdev,
1710 				interface->desc.bInterfaceNumber,
1711 				interface->desc.bAlternateSetting);
1712 		else
1713 			status = 0;
1714 
1715 	}
1716 	if (status >= 0 && dev->status)
1717 		status = init_status (dev, udev);
1718 	if (status < 0)
1719 		goto out3;
1720 
1721 	if (!dev->rx_urb_size)
1722 		dev->rx_urb_size = dev->hard_mtu;
1723 	dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
1724 
1725 	/* let userspace know we have a random address */
1726 	if (ether_addr_equal(net->dev_addr, node_id))
1727 		net->addr_assign_type = NET_ADDR_RANDOM;
1728 
1729 	if ((dev->driver_info->flags & FLAG_WLAN) != 0)
1730 		SET_NETDEV_DEVTYPE(net, &wlan_type);
1731 	if ((dev->driver_info->flags & FLAG_WWAN) != 0)
1732 		SET_NETDEV_DEVTYPE(net, &wwan_type);
1733 
1734 	/* initialize max rx_qlen and tx_qlen */
1735 	usbnet_update_max_qlen(dev);
1736 
1737 	if (dev->can_dma_sg && !(info->flags & FLAG_SEND_ZLP) &&
1738 		!(info->flags & FLAG_MULTI_PACKET)) {
1739 		dev->padding_pkt = kzalloc(1, GFP_KERNEL);
1740 		if (!dev->padding_pkt) {
1741 			status = -ENOMEM;
1742 			goto out4;
1743 		}
1744 	}
1745 
1746 	status = register_netdev (net);
1747 	if (status)
1748 		goto out5;
1749 	netif_info(dev, probe, dev->net,
1750 		   "register '%s' at usb-%s-%s, %s, %pM\n",
1751 		   udev->dev.driver->name,
1752 		   xdev->bus->bus_name, xdev->devpath,
1753 		   dev->driver_info->description,
1754 		   net->dev_addr);
1755 
1756 	// ok, it's ready to go.
1757 	usb_set_intfdata (udev, dev);
1758 
1759 	netif_device_attach (net);
1760 
1761 	if (dev->driver_info->flags & FLAG_LINK_INTR)
1762 		usbnet_link_change(dev, 0, 0);
1763 
1764 	return 0;
1765 
1766 out5:
1767 	kfree(dev->padding_pkt);
1768 out4:
1769 	usb_free_urb(dev->interrupt);
1770 out3:
1771 	if (info->unbind)
1772 		info->unbind (dev, udev);
1773 out1:
1774 	free_netdev(net);
1775 out:
1776 	return status;
1777 }
1778 EXPORT_SYMBOL_GPL(usbnet_probe);
1779 
1780 /*-------------------------------------------------------------------------*/
1781 
1782 /*
1783  * suspend the whole driver as soon as the first interface is suspended
1784  * resume only when the last interface is resumed
1785  */
1786 
1787 int usbnet_suspend (struct usb_interface *intf, pm_message_t message)
1788 {
1789 	struct usbnet		*dev = usb_get_intfdata(intf);
1790 
1791 	if (!dev->suspend_count++) {
1792 		spin_lock_irq(&dev->txq.lock);
1793 		/* don't autosuspend while transmitting */
1794 		if (dev->txq.qlen && PMSG_IS_AUTO(message)) {
1795 			dev->suspend_count--;
1796 			spin_unlock_irq(&dev->txq.lock);
1797 			return -EBUSY;
1798 		} else {
1799 			set_bit(EVENT_DEV_ASLEEP, &dev->flags);
1800 			spin_unlock_irq(&dev->txq.lock);
1801 		}
1802 		/*
1803 		 * accelerate emptying of the rx and queues, to avoid
1804 		 * having everything error out.
1805 		 */
1806 		netif_device_detach (dev->net);
1807 		usbnet_terminate_urbs(dev);
1808 		__usbnet_status_stop_force(dev);
1809 
1810 		/*
1811 		 * reattach so runtime management can use and
1812 		 * wake the device
1813 		 */
1814 		netif_device_attach (dev->net);
1815 	}
1816 	return 0;
1817 }
1818 EXPORT_SYMBOL_GPL(usbnet_suspend);
1819 
1820 int usbnet_resume (struct usb_interface *intf)
1821 {
1822 	struct usbnet		*dev = usb_get_intfdata(intf);
1823 	struct sk_buff          *skb;
1824 	struct urb              *res;
1825 	int                     retval;
1826 
1827 	if (!--dev->suspend_count) {
1828 		/* resume interrupt URB if it was previously submitted */
1829 		__usbnet_status_start_force(dev, GFP_NOIO);
1830 
1831 		spin_lock_irq(&dev->txq.lock);
1832 		while ((res = usb_get_from_anchor(&dev->deferred))) {
1833 
1834 			skb = (struct sk_buff *)res->context;
1835 			retval = usb_submit_urb(res, GFP_ATOMIC);
1836 			if (retval < 0) {
1837 				dev_kfree_skb_any(skb);
1838 				kfree(res->sg);
1839 				usb_free_urb(res);
1840 				usb_autopm_put_interface_async(dev->intf);
1841 			} else {
1842 				dev->net->trans_start = jiffies;
1843 				__skb_queue_tail(&dev->txq, skb);
1844 			}
1845 		}
1846 
1847 		smp_mb();
1848 		clear_bit(EVENT_DEV_ASLEEP, &dev->flags);
1849 		spin_unlock_irq(&dev->txq.lock);
1850 
1851 		if (test_bit(EVENT_DEV_OPEN, &dev->flags)) {
1852 			/* handle remote wakeup ASAP
1853 			 * we cannot race against stop
1854 			 */
1855 			if (netif_device_present(dev->net) &&
1856 				!timer_pending(&dev->delay) &&
1857 				!test_bit(EVENT_RX_HALT, &dev->flags))
1858 					rx_alloc_submit(dev, GFP_NOIO);
1859 
1860 			if (!(dev->txq.qlen >= TX_QLEN(dev)))
1861 				netif_tx_wake_all_queues(dev->net);
1862 			tasklet_schedule (&dev->bh);
1863 		}
1864 	}
1865 
1866 	if (test_and_clear_bit(EVENT_DEVICE_REPORT_IDLE, &dev->flags))
1867 		usb_autopm_get_interface_no_resume(intf);
1868 
1869 	return 0;
1870 }
1871 EXPORT_SYMBOL_GPL(usbnet_resume);
1872 
1873 /*
1874  * Either a subdriver implements manage_power, then it is assumed to always
1875  * be ready to be suspended or it reports the readiness to be suspended
1876  * explicitly
1877  */
1878 void usbnet_device_suggests_idle(struct usbnet *dev)
1879 {
1880 	if (!test_and_set_bit(EVENT_DEVICE_REPORT_IDLE, &dev->flags)) {
1881 		dev->intf->needs_remote_wakeup = 1;
1882 		usb_autopm_put_interface_async(dev->intf);
1883 	}
1884 }
1885 EXPORT_SYMBOL(usbnet_device_suggests_idle);
1886 
1887 /*
1888  * For devices that can do without special commands
1889  */
1890 int usbnet_manage_power(struct usbnet *dev, int on)
1891 {
1892 	dev->intf->needs_remote_wakeup = on;
1893 	return 0;
1894 }
1895 EXPORT_SYMBOL(usbnet_manage_power);
1896 
1897 void usbnet_link_change(struct usbnet *dev, bool link, bool need_reset)
1898 {
1899 	/* update link after link is reseted */
1900 	if (link && !need_reset)
1901 		netif_carrier_on(dev->net);
1902 	else
1903 		netif_carrier_off(dev->net);
1904 
1905 	if (need_reset && link)
1906 		usbnet_defer_kevent(dev, EVENT_LINK_RESET);
1907 	else
1908 		usbnet_defer_kevent(dev, EVENT_LINK_CHANGE);
1909 }
1910 EXPORT_SYMBOL(usbnet_link_change);
1911 
1912 /*-------------------------------------------------------------------------*/
1913 static int __usbnet_read_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
1914 			     u16 value, u16 index, void *data, u16 size)
1915 {
1916 	void *buf = NULL;
1917 	int err = -ENOMEM;
1918 
1919 	netdev_dbg(dev->net, "usbnet_read_cmd cmd=0x%02x reqtype=%02x"
1920 		   " value=0x%04x index=0x%04x size=%d\n",
1921 		   cmd, reqtype, value, index, size);
1922 
1923 	if (data) {
1924 		buf = kmalloc(size, GFP_KERNEL);
1925 		if (!buf)
1926 			goto out;
1927 	}
1928 
1929 	err = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
1930 			      cmd, reqtype, value, index, buf, size,
1931 			      USB_CTRL_GET_TIMEOUT);
1932 	if (err > 0 && err <= size)
1933 		memcpy(data, buf, err);
1934 	kfree(buf);
1935 out:
1936 	return err;
1937 }
1938 
1939 static int __usbnet_write_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
1940 			      u16 value, u16 index, const void *data,
1941 			      u16 size)
1942 {
1943 	void *buf = NULL;
1944 	int err = -ENOMEM;
1945 
1946 	netdev_dbg(dev->net, "usbnet_write_cmd cmd=0x%02x reqtype=%02x"
1947 		   " value=0x%04x index=0x%04x size=%d\n",
1948 		   cmd, reqtype, value, index, size);
1949 
1950 	if (data) {
1951 		buf = kmemdup(data, size, GFP_KERNEL);
1952 		if (!buf)
1953 			goto out;
1954 	}
1955 
1956 	err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
1957 			      cmd, reqtype, value, index, buf, size,
1958 			      USB_CTRL_SET_TIMEOUT);
1959 	kfree(buf);
1960 
1961 out:
1962 	return err;
1963 }
1964 
1965 /*
1966  * The function can't be called inside suspend/resume callback,
1967  * otherwise deadlock will be caused.
1968  */
1969 int usbnet_read_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
1970 		    u16 value, u16 index, void *data, u16 size)
1971 {
1972 	int ret;
1973 
1974 	if (usb_autopm_get_interface(dev->intf) < 0)
1975 		return -ENODEV;
1976 	ret = __usbnet_read_cmd(dev, cmd, reqtype, value, index,
1977 				data, size);
1978 	usb_autopm_put_interface(dev->intf);
1979 	return ret;
1980 }
1981 EXPORT_SYMBOL_GPL(usbnet_read_cmd);
1982 
1983 /*
1984  * The function can't be called inside suspend/resume callback,
1985  * otherwise deadlock will be caused.
1986  */
1987 int usbnet_write_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
1988 		     u16 value, u16 index, const void *data, u16 size)
1989 {
1990 	int ret;
1991 
1992 	if (usb_autopm_get_interface(dev->intf) < 0)
1993 		return -ENODEV;
1994 	ret = __usbnet_write_cmd(dev, cmd, reqtype, value, index,
1995 				 data, size);
1996 	usb_autopm_put_interface(dev->intf);
1997 	return ret;
1998 }
1999 EXPORT_SYMBOL_GPL(usbnet_write_cmd);
2000 
2001 /*
2002  * The function can be called inside suspend/resume callback safely
2003  * and should only be called by suspend/resume callback generally.
2004  */
2005 int usbnet_read_cmd_nopm(struct usbnet *dev, u8 cmd, u8 reqtype,
2006 			  u16 value, u16 index, void *data, u16 size)
2007 {
2008 	return __usbnet_read_cmd(dev, cmd, reqtype, value, index,
2009 				 data, size);
2010 }
2011 EXPORT_SYMBOL_GPL(usbnet_read_cmd_nopm);
2012 
2013 /*
2014  * The function can be called inside suspend/resume callback safely
2015  * and should only be called by suspend/resume callback generally.
2016  */
2017 int usbnet_write_cmd_nopm(struct usbnet *dev, u8 cmd, u8 reqtype,
2018 			  u16 value, u16 index, const void *data,
2019 			  u16 size)
2020 {
2021 	return __usbnet_write_cmd(dev, cmd, reqtype, value, index,
2022 				  data, size);
2023 }
2024 EXPORT_SYMBOL_GPL(usbnet_write_cmd_nopm);
2025 
2026 static void usbnet_async_cmd_cb(struct urb *urb)
2027 {
2028 	struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
2029 	int status = urb->status;
2030 
2031 	if (status < 0)
2032 		dev_dbg(&urb->dev->dev, "%s failed with %d",
2033 			__func__, status);
2034 
2035 	kfree(req);
2036 	usb_free_urb(urb);
2037 }
2038 
2039 /*
2040  * The caller must make sure that device can't be put into suspend
2041  * state until the control URB completes.
2042  */
2043 int usbnet_write_cmd_async(struct usbnet *dev, u8 cmd, u8 reqtype,
2044 			   u16 value, u16 index, const void *data, u16 size)
2045 {
2046 	struct usb_ctrlrequest *req = NULL;
2047 	struct urb *urb;
2048 	int err = -ENOMEM;
2049 	void *buf = NULL;
2050 
2051 	netdev_dbg(dev->net, "usbnet_write_cmd cmd=0x%02x reqtype=%02x"
2052 		   " value=0x%04x index=0x%04x size=%d\n",
2053 		   cmd, reqtype, value, index, size);
2054 
2055 	urb = usb_alloc_urb(0, GFP_ATOMIC);
2056 	if (!urb) {
2057 		netdev_err(dev->net, "Error allocating URB in"
2058 			   " %s!\n", __func__);
2059 		goto fail;
2060 	}
2061 
2062 	if (data) {
2063 		buf = kmemdup(data, size, GFP_ATOMIC);
2064 		if (!buf) {
2065 			netdev_err(dev->net, "Error allocating buffer"
2066 				   " in %s!\n", __func__);
2067 			goto fail_free;
2068 		}
2069 	}
2070 
2071 	req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
2072 	if (!req)
2073 		goto fail_free_buf;
2074 
2075 	req->bRequestType = reqtype;
2076 	req->bRequest = cmd;
2077 	req->wValue = cpu_to_le16(value);
2078 	req->wIndex = cpu_to_le16(index);
2079 	req->wLength = cpu_to_le16(size);
2080 
2081 	usb_fill_control_urb(urb, dev->udev,
2082 			     usb_sndctrlpipe(dev->udev, 0),
2083 			     (void *)req, buf, size,
2084 			     usbnet_async_cmd_cb, req);
2085 	urb->transfer_flags |= URB_FREE_BUFFER;
2086 
2087 	err = usb_submit_urb(urb, GFP_ATOMIC);
2088 	if (err < 0) {
2089 		netdev_err(dev->net, "Error submitting the control"
2090 			   " message: status=%d\n", err);
2091 		goto fail_free;
2092 	}
2093 	return 0;
2094 
2095 fail_free_buf:
2096 	kfree(buf);
2097 fail_free:
2098 	kfree(req);
2099 	usb_free_urb(urb);
2100 fail:
2101 	return err;
2102 
2103 }
2104 EXPORT_SYMBOL_GPL(usbnet_write_cmd_async);
2105 /*-------------------------------------------------------------------------*/
2106 
2107 static int __init usbnet_init(void)
2108 {
2109 	/* Compiler should optimize this out. */
2110 	BUILD_BUG_ON(
2111 		FIELD_SIZEOF(struct sk_buff, cb) < sizeof(struct skb_data));
2112 
2113 	eth_random_addr(node_id);
2114 	return 0;
2115 }
2116 module_init(usbnet_init);
2117 
2118 static void __exit usbnet_exit(void)
2119 {
2120 }
2121 module_exit(usbnet_exit);
2122 
2123 MODULE_AUTHOR("David Brownell");
2124 MODULE_DESCRIPTION("USB network driver framework");
2125 MODULE_LICENSE("GPL");
2126