1 /* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices
2 *
3 * Author : Liu Junliang <liujunliang_ljl@163.com>
4 *
5 * Based on asix_common.c, asix_devices.c
6 *
7 * This file is licensed under the terms of the GNU General Public License
8 * version 2. This program is licensed "as is" without any warranty of any
9 * kind, whether express or implied.*
10 */
11
12 #include <linux/module.h>
13 #include <linux/kmod.h>
14 #include <linux/init.h>
15 #include <linux/netdevice.h>
16 #include <linux/etherdevice.h>
17 #include <linux/ethtool.h>
18 #include <linux/workqueue.h>
19 #include <linux/mii.h>
20 #include <linux/usb.h>
21 #include <linux/crc32.h>
22 #include <linux/usb/usbnet.h>
23 #include <linux/slab.h>
24 #include <linux/if_vlan.h>
25
26 #include "sr9800.h"
27
sr_read_cmd(struct usbnet * dev,u8 cmd,u16 value,u16 index,u16 size,void * data)28 static int sr_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
29 u16 size, void *data)
30 {
31 int err;
32
33 err = usbnet_read_cmd(dev, cmd, SR_REQ_RD_REG, value, index,
34 data, size);
35 if ((err != size) && (err >= 0))
36 err = -EINVAL;
37
38 return err;
39 }
40
sr_write_cmd(struct usbnet * dev,u8 cmd,u16 value,u16 index,u16 size,void * data)41 static int sr_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
42 u16 size, void *data)
43 {
44 int err;
45
46 err = usbnet_write_cmd(dev, cmd, SR_REQ_WR_REG, value, index,
47 data, size);
48 if ((err != size) && (err >= 0))
49 err = -EINVAL;
50
51 return err;
52 }
53
54 static void
sr_write_cmd_async(struct usbnet * dev,u8 cmd,u16 value,u16 index,u16 size,void * data)55 sr_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
56 u16 size, void *data)
57 {
58 usbnet_write_cmd_async(dev, cmd, SR_REQ_WR_REG, value, index, data,
59 size);
60 }
61
sr_rx_fixup(struct usbnet * dev,struct sk_buff * skb)62 static int sr_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
63 {
64 int offset = 0;
65
66 /* This check is no longer done by usbnet */
67 if (skb->len < dev->net->hard_header_len)
68 return 0;
69
70 while (offset + sizeof(u32) < skb->len) {
71 struct sk_buff *sr_skb;
72 u16 size;
73 u32 header = get_unaligned_le32(skb->data + offset);
74
75 offset += sizeof(u32);
76 /* get the packet length */
77 size = (u16) (header & 0x7ff);
78 if (size != ((~header >> 16) & 0x07ff)) {
79 netdev_err(dev->net, "%s : Bad Header Length\n",
80 __func__);
81 return 0;
82 }
83
84 if ((size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) ||
85 (size + offset > skb->len)) {
86 netdev_err(dev->net, "%s : Bad RX Length %d\n",
87 __func__, size);
88 return 0;
89 }
90 sr_skb = netdev_alloc_skb_ip_align(dev->net, size);
91 if (!sr_skb)
92 return 0;
93
94 skb_put(sr_skb, size);
95 memcpy(sr_skb->data, skb->data + offset, size);
96 usbnet_skb_return(dev, sr_skb);
97
98 offset += (size + 1) & 0xfffe;
99 }
100
101 if (skb->len != offset) {
102 netdev_err(dev->net, "%s : Bad SKB Length %d\n", __func__,
103 skb->len);
104 return 0;
105 }
106
107 return 1;
108 }
109
sr_tx_fixup(struct usbnet * dev,struct sk_buff * skb,gfp_t flags)110 static struct sk_buff *sr_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
111 gfp_t flags)
112 {
113 int headroom = skb_headroom(skb);
114 int tailroom = skb_tailroom(skb);
115 u32 padbytes = 0xffff0000;
116 u32 packet_len;
117 int padlen;
118 void *ptr;
119
120 padlen = ((skb->len + 4) % (dev->maxpacket - 1)) ? 0 : 4;
121
122 if ((!skb_cloned(skb)) && ((headroom + tailroom) >= (4 + padlen))) {
123 if ((headroom < 4) || (tailroom < padlen)) {
124 skb->data = memmove(skb->head + 4, skb->data,
125 skb->len);
126 skb_set_tail_pointer(skb, skb->len);
127 }
128 } else {
129 struct sk_buff *skb2;
130 skb2 = skb_copy_expand(skb, 4, padlen, flags);
131 dev_kfree_skb_any(skb);
132 skb = skb2;
133 if (!skb)
134 return NULL;
135 }
136
137 ptr = skb_push(skb, 4);
138 packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4);
139 put_unaligned_le32(packet_len, ptr);
140
141 if (padlen) {
142 put_unaligned_le32(padbytes, skb_tail_pointer(skb));
143 skb_put(skb, sizeof(padbytes));
144 }
145
146 usbnet_set_skb_tx_stats(skb, 1, 0);
147 return skb;
148 }
149
sr_status(struct usbnet * dev,struct urb * urb)150 static void sr_status(struct usbnet *dev, struct urb *urb)
151 {
152 struct sr9800_int_data *event;
153 int link;
154
155 if (urb->actual_length < 8)
156 return;
157
158 event = urb->transfer_buffer;
159 link = event->link & 0x01;
160 if (netif_carrier_ok(dev->net) != link) {
161 usbnet_link_change(dev, link, 1);
162 netdev_dbg(dev->net, "Link Status is: %d\n", link);
163 }
164
165 return;
166 }
167
sr_set_sw_mii(struct usbnet * dev)168 static inline int sr_set_sw_mii(struct usbnet *dev)
169 {
170 int ret;
171
172 ret = sr_write_cmd(dev, SR_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
173 if (ret < 0)
174 netdev_err(dev->net, "Failed to enable software MII access\n");
175 return ret;
176 }
177
sr_set_hw_mii(struct usbnet * dev)178 static inline int sr_set_hw_mii(struct usbnet *dev)
179 {
180 int ret;
181
182 ret = sr_write_cmd(dev, SR_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
183 if (ret < 0)
184 netdev_err(dev->net, "Failed to enable hardware MII access\n");
185 return ret;
186 }
187
sr_get_phy_addr(struct usbnet * dev)188 static inline int sr_get_phy_addr(struct usbnet *dev)
189 {
190 u8 buf[2];
191 int ret;
192
193 ret = sr_read_cmd(dev, SR_CMD_READ_PHY_ID, 0, 0, 2, buf);
194 if (ret < 0) {
195 netdev_err(dev->net, "%s : Error reading PHYID register:%02x\n",
196 __func__, ret);
197 goto out;
198 }
199 netdev_dbg(dev->net, "%s : returning 0x%04x\n", __func__,
200 *((__le16 *)buf));
201
202 ret = buf[1];
203
204 out:
205 return ret;
206 }
207
sr_sw_reset(struct usbnet * dev,u8 flags)208 static int sr_sw_reset(struct usbnet *dev, u8 flags)
209 {
210 int ret;
211
212 ret = sr_write_cmd(dev, SR_CMD_SW_RESET, flags, 0, 0, NULL);
213 if (ret < 0)
214 netdev_err(dev->net, "Failed to send software reset:%02x\n",
215 ret);
216
217 return ret;
218 }
219
sr_read_rx_ctl(struct usbnet * dev)220 static u16 sr_read_rx_ctl(struct usbnet *dev)
221 {
222 __le16 v;
223 int ret;
224
225 ret = sr_read_cmd(dev, SR_CMD_READ_RX_CTL, 0, 0, 2, &v);
226 if (ret < 0) {
227 netdev_err(dev->net, "Error reading RX_CTL register:%02x\n",
228 ret);
229 goto out;
230 }
231
232 ret = le16_to_cpu(v);
233 out:
234 return ret;
235 }
236
sr_write_rx_ctl(struct usbnet * dev,u16 mode)237 static int sr_write_rx_ctl(struct usbnet *dev, u16 mode)
238 {
239 int ret;
240
241 netdev_dbg(dev->net, "%s : mode = 0x%04x\n", __func__, mode);
242 ret = sr_write_cmd(dev, SR_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
243 if (ret < 0)
244 netdev_err(dev->net,
245 "Failed to write RX_CTL mode to 0x%04x:%02x\n",
246 mode, ret);
247
248 return ret;
249 }
250
sr_read_medium_status(struct usbnet * dev)251 static u16 sr_read_medium_status(struct usbnet *dev)
252 {
253 __le16 v;
254 int ret;
255
256 ret = sr_read_cmd(dev, SR_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
257 if (ret < 0) {
258 netdev_err(dev->net,
259 "Error reading Medium Status register:%02x\n", ret);
260 return ret; /* TODO: callers not checking for error ret */
261 }
262
263 return le16_to_cpu(v);
264 }
265
sr_write_medium_mode(struct usbnet * dev,u16 mode)266 static int sr_write_medium_mode(struct usbnet *dev, u16 mode)
267 {
268 int ret;
269
270 netdev_dbg(dev->net, "%s : mode = 0x%04x\n", __func__, mode);
271 ret = sr_write_cmd(dev, SR_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
272 if (ret < 0)
273 netdev_err(dev->net,
274 "Failed to write Medium Mode mode to 0x%04x:%02x\n",
275 mode, ret);
276 return ret;
277 }
278
sr_write_gpio(struct usbnet * dev,u16 value,int sleep)279 static int sr_write_gpio(struct usbnet *dev, u16 value, int sleep)
280 {
281 int ret;
282
283 netdev_dbg(dev->net, "%s : value = 0x%04x\n", __func__, value);
284 ret = sr_write_cmd(dev, SR_CMD_WRITE_GPIOS, value, 0, 0, NULL);
285 if (ret < 0)
286 netdev_err(dev->net, "Failed to write GPIO value 0x%04x:%02x\n",
287 value, ret);
288 if (sleep)
289 msleep(sleep);
290
291 return ret;
292 }
293
294 /* SR9800 have a 16-bit RX_CTL value */
sr_set_multicast(struct net_device * net)295 static void sr_set_multicast(struct net_device *net)
296 {
297 struct usbnet *dev = netdev_priv(net);
298 struct sr_data *data = (struct sr_data *)&dev->data;
299 u16 rx_ctl = SR_DEFAULT_RX_CTL;
300
301 if (net->flags & IFF_PROMISC) {
302 rx_ctl |= SR_RX_CTL_PRO;
303 } else if (net->flags & IFF_ALLMULTI ||
304 netdev_mc_count(net) > SR_MAX_MCAST) {
305 rx_ctl |= SR_RX_CTL_AMALL;
306 } else if (netdev_mc_empty(net)) {
307 /* just broadcast and directed */
308 } else {
309 /* We use the 20 byte dev->data
310 * for our 8 byte filter buffer
311 * to avoid allocating memory that
312 * is tricky to free later
313 */
314 struct netdev_hw_addr *ha;
315 u32 crc_bits;
316
317 memset(data->multi_filter, 0, SR_MCAST_FILTER_SIZE);
318
319 /* Build the multicast hash filter. */
320 netdev_for_each_mc_addr(ha, net) {
321 crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
322 data->multi_filter[crc_bits >> 3] |=
323 1 << (crc_bits & 7);
324 }
325
326 sr_write_cmd_async(dev, SR_CMD_WRITE_MULTI_FILTER, 0, 0,
327 SR_MCAST_FILTER_SIZE, data->multi_filter);
328
329 rx_ctl |= SR_RX_CTL_AM;
330 }
331
332 sr_write_cmd_async(dev, SR_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
333 }
334
sr_mdio_read(struct net_device * net,int phy_id,int loc)335 static int sr_mdio_read(struct net_device *net, int phy_id, int loc)
336 {
337 struct usbnet *dev = netdev_priv(net);
338 __le16 res = 0;
339
340 mutex_lock(&dev->phy_mutex);
341 sr_set_sw_mii(dev);
342 sr_read_cmd(dev, SR_CMD_READ_MII_REG, phy_id, (__u16)loc, 2, &res);
343 sr_set_hw_mii(dev);
344 mutex_unlock(&dev->phy_mutex);
345
346 netdev_dbg(dev->net,
347 "%s : phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", __func__,
348 phy_id, loc, le16_to_cpu(res));
349
350 return le16_to_cpu(res);
351 }
352
353 static void
sr_mdio_write(struct net_device * net,int phy_id,int loc,int val)354 sr_mdio_write(struct net_device *net, int phy_id, int loc, int val)
355 {
356 struct usbnet *dev = netdev_priv(net);
357 __le16 res = cpu_to_le16(val);
358
359 netdev_dbg(dev->net,
360 "%s : phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", __func__,
361 phy_id, loc, val);
362 mutex_lock(&dev->phy_mutex);
363 sr_set_sw_mii(dev);
364 sr_write_cmd(dev, SR_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
365 sr_set_hw_mii(dev);
366 mutex_unlock(&dev->phy_mutex);
367 }
368
369 /* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */
sr_get_phyid(struct usbnet * dev)370 static u32 sr_get_phyid(struct usbnet *dev)
371 {
372 int phy_reg;
373 u32 phy_id;
374 int i;
375
376 /* Poll for the rare case the FW or phy isn't ready yet. */
377 for (i = 0; i < 100; i++) {
378 phy_reg = sr_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
379 if (phy_reg != 0 && phy_reg != 0xFFFF)
380 break;
381 mdelay(1);
382 }
383
384 if (phy_reg <= 0 || phy_reg == 0xFFFF)
385 return 0;
386
387 phy_id = (phy_reg & 0xffff) << 16;
388
389 phy_reg = sr_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2);
390 if (phy_reg < 0)
391 return 0;
392
393 phy_id |= (phy_reg & 0xffff);
394
395 return phy_id;
396 }
397
398 static void
sr_get_wol(struct net_device * net,struct ethtool_wolinfo * wolinfo)399 sr_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
400 {
401 struct usbnet *dev = netdev_priv(net);
402 u8 opt;
403
404 if (sr_read_cmd(dev, SR_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
405 wolinfo->supported = 0;
406 wolinfo->wolopts = 0;
407 return;
408 }
409 wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
410 wolinfo->wolopts = 0;
411 if (opt & SR_MONITOR_LINK)
412 wolinfo->wolopts |= WAKE_PHY;
413 if (opt & SR_MONITOR_MAGIC)
414 wolinfo->wolopts |= WAKE_MAGIC;
415 }
416
417 static int
sr_set_wol(struct net_device * net,struct ethtool_wolinfo * wolinfo)418 sr_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
419 {
420 struct usbnet *dev = netdev_priv(net);
421 u8 opt = 0;
422
423 if (wolinfo->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
424 return -EINVAL;
425
426 if (wolinfo->wolopts & WAKE_PHY)
427 opt |= SR_MONITOR_LINK;
428 if (wolinfo->wolopts & WAKE_MAGIC)
429 opt |= SR_MONITOR_MAGIC;
430
431 if (sr_write_cmd(dev, SR_CMD_WRITE_MONITOR_MODE,
432 opt, 0, 0, NULL) < 0)
433 return -EINVAL;
434
435 return 0;
436 }
437
sr_get_eeprom_len(struct net_device * net)438 static int sr_get_eeprom_len(struct net_device *net)
439 {
440 struct usbnet *dev = netdev_priv(net);
441 struct sr_data *data = (struct sr_data *)&dev->data;
442
443 return data->eeprom_len;
444 }
445
sr_get_eeprom(struct net_device * net,struct ethtool_eeprom * eeprom,u8 * data)446 static int sr_get_eeprom(struct net_device *net,
447 struct ethtool_eeprom *eeprom, u8 *data)
448 {
449 struct usbnet *dev = netdev_priv(net);
450 __le16 *ebuf = (__le16 *)data;
451 int ret;
452 int i;
453
454 /* Crude hack to ensure that we don't overwrite memory
455 * if an odd length is supplied
456 */
457 if (eeprom->len % 2)
458 return -EINVAL;
459
460 eeprom->magic = SR_EEPROM_MAGIC;
461
462 /* sr9800 returns 2 bytes from eeprom on read */
463 for (i = 0; i < eeprom->len / 2; i++) {
464 ret = sr_read_cmd(dev, SR_CMD_READ_EEPROM, eeprom->offset + i,
465 0, 2, &ebuf[i]);
466 if (ret < 0)
467 return -EINVAL;
468 }
469 return 0;
470 }
471
sr_get_drvinfo(struct net_device * net,struct ethtool_drvinfo * info)472 static void sr_get_drvinfo(struct net_device *net,
473 struct ethtool_drvinfo *info)
474 {
475 /* Inherit standard device info */
476 usbnet_get_drvinfo(net, info);
477 strncpy(info->driver, DRIVER_NAME, sizeof(info->driver));
478 strncpy(info->version, DRIVER_VERSION, sizeof(info->version));
479 }
480
sr_get_link(struct net_device * net)481 static u32 sr_get_link(struct net_device *net)
482 {
483 struct usbnet *dev = netdev_priv(net);
484
485 return mii_link_ok(&dev->mii);
486 }
487
sr_ioctl(struct net_device * net,struct ifreq * rq,int cmd)488 static int sr_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
489 {
490 struct usbnet *dev = netdev_priv(net);
491
492 return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
493 }
494
sr_set_mac_address(struct net_device * net,void * p)495 static int sr_set_mac_address(struct net_device *net, void *p)
496 {
497 struct usbnet *dev = netdev_priv(net);
498 struct sr_data *data = (struct sr_data *)&dev->data;
499 struct sockaddr *addr = p;
500
501 if (netif_running(net))
502 return -EBUSY;
503 if (!is_valid_ether_addr(addr->sa_data))
504 return -EADDRNOTAVAIL;
505
506 eth_hw_addr_set(net, addr->sa_data);
507
508 /* We use the 20 byte dev->data
509 * for our 6 byte mac buffer
510 * to avoid allocating memory that
511 * is tricky to free later
512 */
513 memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
514 sr_write_cmd_async(dev, SR_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
515 data->mac_addr);
516
517 return 0;
518 }
519
520 static const struct ethtool_ops sr9800_ethtool_ops = {
521 .get_drvinfo = sr_get_drvinfo,
522 .get_link = sr_get_link,
523 .get_msglevel = usbnet_get_msglevel,
524 .set_msglevel = usbnet_set_msglevel,
525 .get_wol = sr_get_wol,
526 .set_wol = sr_set_wol,
527 .get_eeprom_len = sr_get_eeprom_len,
528 .get_eeprom = sr_get_eeprom,
529 .nway_reset = usbnet_nway_reset,
530 .get_link_ksettings = usbnet_get_link_ksettings_mii,
531 .set_link_ksettings = usbnet_set_link_ksettings_mii,
532 };
533
sr9800_link_reset(struct usbnet * dev)534 static int sr9800_link_reset(struct usbnet *dev)
535 {
536 struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
537 u16 mode;
538
539 mii_check_media(&dev->mii, 1, 1);
540 mii_ethtool_gset(&dev->mii, &ecmd);
541 mode = SR9800_MEDIUM_DEFAULT;
542
543 if (ethtool_cmd_speed(&ecmd) != SPEED_100)
544 mode &= ~SR_MEDIUM_PS;
545
546 if (ecmd.duplex != DUPLEX_FULL)
547 mode &= ~SR_MEDIUM_FD;
548
549 netdev_dbg(dev->net, "%s : speed: %u duplex: %d mode: 0x%04x\n",
550 __func__, ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
551
552 sr_write_medium_mode(dev, mode);
553
554 return 0;
555 }
556
557
sr9800_set_default_mode(struct usbnet * dev)558 static int sr9800_set_default_mode(struct usbnet *dev)
559 {
560 u16 rx_ctl;
561 int ret;
562
563 sr_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
564 sr_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
565 ADVERTISE_ALL | ADVERTISE_CSMA);
566 mii_nway_restart(&dev->mii);
567
568 ret = sr_write_medium_mode(dev, SR9800_MEDIUM_DEFAULT);
569 if (ret < 0)
570 goto out;
571
572 ret = sr_write_cmd(dev, SR_CMD_WRITE_IPG012,
573 SR9800_IPG0_DEFAULT | SR9800_IPG1_DEFAULT,
574 SR9800_IPG2_DEFAULT, 0, NULL);
575 if (ret < 0) {
576 netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
577 goto out;
578 }
579
580 /* Set RX_CTL to default values with 2k buffer, and enable cactus */
581 ret = sr_write_rx_ctl(dev, SR_DEFAULT_RX_CTL);
582 if (ret < 0)
583 goto out;
584
585 rx_ctl = sr_read_rx_ctl(dev);
586 netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
587 rx_ctl);
588
589 rx_ctl = sr_read_medium_status(dev);
590 netdev_dbg(dev->net, "Medium Status:0x%04x after all initializations\n",
591 rx_ctl);
592
593 return 0;
594 out:
595 return ret;
596 }
597
sr9800_reset(struct usbnet * dev)598 static int sr9800_reset(struct usbnet *dev)
599 {
600 struct sr_data *data = (struct sr_data *)&dev->data;
601 int ret, embd_phy;
602 u16 rx_ctl;
603
604 ret = sr_write_gpio(dev,
605 SR_GPIO_RSE | SR_GPIO_GPO_2 | SR_GPIO_GPO2EN, 5);
606 if (ret < 0)
607 goto out;
608
609 embd_phy = ((sr_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
610
611 ret = sr_write_cmd(dev, SR_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
612 if (ret < 0) {
613 netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
614 goto out;
615 }
616
617 ret = sr_sw_reset(dev, SR_SWRESET_IPPD | SR_SWRESET_PRL);
618 if (ret < 0)
619 goto out;
620
621 msleep(150);
622
623 ret = sr_sw_reset(dev, SR_SWRESET_CLEAR);
624 if (ret < 0)
625 goto out;
626
627 msleep(150);
628
629 if (embd_phy) {
630 ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
631 if (ret < 0)
632 goto out;
633 } else {
634 ret = sr_sw_reset(dev, SR_SWRESET_PRTE);
635 if (ret < 0)
636 goto out;
637 }
638
639 msleep(150);
640 rx_ctl = sr_read_rx_ctl(dev);
641 netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
642 ret = sr_write_rx_ctl(dev, 0x0000);
643 if (ret < 0)
644 goto out;
645
646 rx_ctl = sr_read_rx_ctl(dev);
647 netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
648
649 ret = sr_sw_reset(dev, SR_SWRESET_PRL);
650 if (ret < 0)
651 goto out;
652
653 msleep(150);
654
655 ret = sr_sw_reset(dev, SR_SWRESET_IPRL | SR_SWRESET_PRL);
656 if (ret < 0)
657 goto out;
658
659 msleep(150);
660
661 ret = sr9800_set_default_mode(dev);
662 if (ret < 0)
663 goto out;
664
665 /* Rewrite MAC address */
666 memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
667 ret = sr_write_cmd(dev, SR_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
668 data->mac_addr);
669 if (ret < 0)
670 goto out;
671
672 return 0;
673
674 out:
675 return ret;
676 }
677
678 static const struct net_device_ops sr9800_netdev_ops = {
679 .ndo_open = usbnet_open,
680 .ndo_stop = usbnet_stop,
681 .ndo_start_xmit = usbnet_start_xmit,
682 .ndo_tx_timeout = usbnet_tx_timeout,
683 .ndo_change_mtu = usbnet_change_mtu,
684 .ndo_get_stats64 = dev_get_tstats64,
685 .ndo_set_mac_address = sr_set_mac_address,
686 .ndo_validate_addr = eth_validate_addr,
687 .ndo_eth_ioctl = sr_ioctl,
688 .ndo_set_rx_mode = sr_set_multicast,
689 };
690
sr9800_phy_powerup(struct usbnet * dev)691 static int sr9800_phy_powerup(struct usbnet *dev)
692 {
693 int ret;
694
695 /* set the embedded Ethernet PHY in power-down state */
696 ret = sr_sw_reset(dev, SR_SWRESET_IPPD | SR_SWRESET_IPRL);
697 if (ret < 0) {
698 netdev_err(dev->net, "Failed to power down PHY : %d\n", ret);
699 return ret;
700 }
701 msleep(20);
702
703 /* set the embedded Ethernet PHY in power-up state */
704 ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
705 if (ret < 0) {
706 netdev_err(dev->net, "Failed to reset PHY: %d\n", ret);
707 return ret;
708 }
709 msleep(600);
710
711 /* set the embedded Ethernet PHY in reset state */
712 ret = sr_sw_reset(dev, SR_SWRESET_CLEAR);
713 if (ret < 0) {
714 netdev_err(dev->net, "Failed to power up PHY: %d\n", ret);
715 return ret;
716 }
717 msleep(20);
718
719 /* set the embedded Ethernet PHY in power-up state */
720 ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
721 if (ret < 0) {
722 netdev_err(dev->net, "Failed to reset PHY: %d\n", ret);
723 return ret;
724 }
725
726 return 0;
727 }
728
sr9800_bind(struct usbnet * dev,struct usb_interface * intf)729 static int sr9800_bind(struct usbnet *dev, struct usb_interface *intf)
730 {
731 struct sr_data *data = (struct sr_data *)&dev->data;
732 u16 led01_mux, led23_mux;
733 int ret, embd_phy;
734 u8 addr[ETH_ALEN];
735 u32 phyid;
736 u16 rx_ctl;
737
738 data->eeprom_len = SR9800_EEPROM_LEN;
739
740 ret = usbnet_get_endpoints(dev, intf);
741 if (ret)
742 goto out;
743
744 /* LED Setting Rule :
745 * AABB:CCDD
746 * AA : MFA0(LED0)
747 * BB : MFA1(LED1)
748 * CC : MFA2(LED2), Reserved for SR9800
749 * DD : MFA3(LED3), Reserved for SR9800
750 */
751 led01_mux = (SR_LED_MUX_LINK_ACTIVE << 8) | SR_LED_MUX_LINK;
752 led23_mux = (SR_LED_MUX_LINK_ACTIVE << 8) | SR_LED_MUX_TX_ACTIVE;
753 ret = sr_write_cmd(dev, SR_CMD_LED_MUX, led01_mux, led23_mux, 0, NULL);
754 if (ret < 0) {
755 netdev_err(dev->net, "set LINK LED failed : %d\n", ret);
756 goto out;
757 }
758
759 /* Get the MAC address */
760 ret = sr_read_cmd(dev, SR_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, addr);
761 if (ret < 0) {
762 netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
763 return ret;
764 }
765 eth_hw_addr_set(dev->net, addr);
766 netdev_dbg(dev->net, "mac addr : %pM\n", dev->net->dev_addr);
767
768 /* Initialize MII structure */
769 dev->mii.dev = dev->net;
770 dev->mii.mdio_read = sr_mdio_read;
771 dev->mii.mdio_write = sr_mdio_write;
772 dev->mii.phy_id_mask = 0x1f;
773 dev->mii.reg_num_mask = 0x1f;
774 dev->mii.phy_id = sr_get_phy_addr(dev);
775
776 dev->net->netdev_ops = &sr9800_netdev_ops;
777 dev->net->ethtool_ops = &sr9800_ethtool_ops;
778
779 embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
780 /* Reset the PHY to normal operation mode */
781 ret = sr_write_cmd(dev, SR_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
782 if (ret < 0) {
783 netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
784 return ret;
785 }
786
787 /* Init PHY routine */
788 ret = sr9800_phy_powerup(dev);
789 if (ret < 0)
790 goto out;
791
792 rx_ctl = sr_read_rx_ctl(dev);
793 netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
794 ret = sr_write_rx_ctl(dev, 0x0000);
795 if (ret < 0)
796 goto out;
797
798 rx_ctl = sr_read_rx_ctl(dev);
799 netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
800
801 /* Read PHYID register *AFTER* the PHY was reset properly */
802 phyid = sr_get_phyid(dev);
803 netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
804
805 /* medium mode setting */
806 ret = sr9800_set_default_mode(dev);
807 if (ret < 0)
808 goto out;
809
810 if (dev->udev->speed == USB_SPEED_HIGH) {
811 ret = sr_write_cmd(dev, SR_CMD_BULKIN_SIZE,
812 SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].byte_cnt,
813 SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].threshold,
814 0, NULL);
815 if (ret < 0) {
816 netdev_err(dev->net, "Reset RX_CTL failed: %d\n", ret);
817 goto out;
818 }
819 dev->rx_urb_size =
820 SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].size;
821 } else {
822 ret = sr_write_cmd(dev, SR_CMD_BULKIN_SIZE,
823 SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].byte_cnt,
824 SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].threshold,
825 0, NULL);
826 if (ret < 0) {
827 netdev_err(dev->net, "Reset RX_CTL failed: %d\n", ret);
828 goto out;
829 }
830 dev->rx_urb_size =
831 SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].size;
832 }
833 netdev_dbg(dev->net, "%s : setting rx_urb_size with : %zu\n", __func__,
834 dev->rx_urb_size);
835 return 0;
836
837 out:
838 return ret;
839 }
840
841 static const struct driver_info sr9800_driver_info = {
842 .description = "CoreChip SR9800 USB 2.0 Ethernet",
843 .bind = sr9800_bind,
844 .status = sr_status,
845 .link_reset = sr9800_link_reset,
846 .reset = sr9800_reset,
847 .flags = DRIVER_FLAG,
848 .rx_fixup = sr_rx_fixup,
849 .tx_fixup = sr_tx_fixup,
850 };
851
852 static const struct usb_device_id products[] = {
853 {
854 USB_DEVICE(0x0fe6, 0x9800), /* SR9800 Device */
855 .driver_info = (unsigned long) &sr9800_driver_info,
856 },
857 {}, /* END */
858 };
859
860 MODULE_DEVICE_TABLE(usb, products);
861
862 static struct usb_driver sr_driver = {
863 .name = DRIVER_NAME,
864 .id_table = products,
865 .probe = usbnet_probe,
866 .suspend = usbnet_suspend,
867 .resume = usbnet_resume,
868 .disconnect = usbnet_disconnect,
869 .supports_autosuspend = 1,
870 };
871
872 module_usb_driver(sr_driver);
873
874 MODULE_AUTHOR("Liu Junliang <liujunliang_ljl@163.com");
875 MODULE_VERSION(DRIVER_VERSION);
876 MODULE_DESCRIPTION("SR9800 USB 2.0 USB2NET Dev : http://www.corechip-sz.com");
877 MODULE_LICENSE("GPL");
878