xref: /openbmc/linux/drivers/net/usb/smsc75xx.c (revision 9f380456)
1  /***************************************************************************
2  *
3  * Copyright (C) 2007-2010 SMSC
4  *
5  * This program is free software; you can redistribute it and/or
6  * modify it under the terms of the GNU General Public License
7  * as published by the Free Software Foundation; either version 2
8  * of the License, or (at your option) any later version.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  *
15  * You should have received a copy of the GNU General Public License
16  * along with this program; if not, write to the Free Software
17  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
18  *
19  *****************************************************************************/
20 
21 #include <linux/module.h>
22 #include <linux/kmod.h>
23 #include <linux/init.h>
24 #include <linux/netdevice.h>
25 #include <linux/etherdevice.h>
26 #include <linux/ethtool.h>
27 #include <linux/mii.h>
28 #include <linux/usb.h>
29 #include <linux/crc32.h>
30 #include <linux/usb/usbnet.h>
31 #include <linux/slab.h>
32 #include "smsc75xx.h"
33 
34 #define SMSC_CHIPNAME			"smsc75xx"
35 #define SMSC_DRIVER_VERSION		"1.0.0"
36 #define HS_USB_PKT_SIZE			(512)
37 #define FS_USB_PKT_SIZE			(64)
38 #define DEFAULT_HS_BURST_CAP_SIZE	(16 * 1024 + 5 * HS_USB_PKT_SIZE)
39 #define DEFAULT_FS_BURST_CAP_SIZE	(6 * 1024 + 33 * FS_USB_PKT_SIZE)
40 #define DEFAULT_BULK_IN_DELAY		(0x00002000)
41 #define MAX_SINGLE_PACKET_SIZE		(9000)
42 #define LAN75XX_EEPROM_MAGIC		(0x7500)
43 #define EEPROM_MAC_OFFSET		(0x01)
44 #define DEFAULT_TX_CSUM_ENABLE		(true)
45 #define DEFAULT_RX_CSUM_ENABLE		(true)
46 #define DEFAULT_TSO_ENABLE		(true)
47 #define SMSC75XX_INTERNAL_PHY_ID	(1)
48 #define SMSC75XX_TX_OVERHEAD		(8)
49 #define MAX_RX_FIFO_SIZE		(20 * 1024)
50 #define MAX_TX_FIFO_SIZE		(12 * 1024)
51 #define USB_VENDOR_ID_SMSC		(0x0424)
52 #define USB_PRODUCT_ID_LAN7500		(0x7500)
53 #define USB_PRODUCT_ID_LAN7505		(0x7505)
54 #define RXW_PADDING			2
55 
56 #define check_warn(ret, fmt, args...) \
57 	({ if (ret < 0) netdev_warn(dev->net, fmt, ##args); })
58 
59 #define check_warn_return(ret, fmt, args...) \
60 	({ if (ret < 0) { netdev_warn(dev->net, fmt, ##args); return ret; } })
61 
62 #define check_warn_goto_done(ret, fmt, args...) \
63 	({ if (ret < 0) { netdev_warn(dev->net, fmt, ##args); goto done; } })
64 
65 struct smsc75xx_priv {
66 	struct usbnet *dev;
67 	u32 rfe_ctl;
68 	u32 multicast_hash_table[DP_SEL_VHF_HASH_LEN];
69 	struct mutex dataport_mutex;
70 	spinlock_t rfe_ctl_lock;
71 	struct work_struct set_multicast;
72 };
73 
74 struct usb_context {
75 	struct usb_ctrlrequest req;
76 	struct usbnet *dev;
77 };
78 
79 static bool turbo_mode = true;
80 module_param(turbo_mode, bool, 0644);
81 MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
82 
83 static int __must_check smsc75xx_read_reg(struct usbnet *dev, u32 index,
84 					  u32 *data)
85 {
86 	u32 *buf = kmalloc(4, GFP_KERNEL);
87 	int ret;
88 
89 	BUG_ON(!dev);
90 
91 	if (!buf)
92 		return -ENOMEM;
93 
94 	ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
95 		USB_VENDOR_REQUEST_READ_REGISTER,
96 		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
97 		00, index, buf, 4, USB_CTRL_GET_TIMEOUT);
98 
99 	if (unlikely(ret < 0))
100 		netdev_warn(dev->net,
101 			"Failed to read reg index 0x%08x: %d", index, ret);
102 
103 	le32_to_cpus(buf);
104 	*data = *buf;
105 	kfree(buf);
106 
107 	return ret;
108 }
109 
110 static int __must_check smsc75xx_write_reg(struct usbnet *dev, u32 index,
111 					   u32 data)
112 {
113 	u32 *buf = kmalloc(4, GFP_KERNEL);
114 	int ret;
115 
116 	BUG_ON(!dev);
117 
118 	if (!buf)
119 		return -ENOMEM;
120 
121 	*buf = data;
122 	cpu_to_le32s(buf);
123 
124 	ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
125 		USB_VENDOR_REQUEST_WRITE_REGISTER,
126 		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
127 		00, index, buf, 4, USB_CTRL_SET_TIMEOUT);
128 
129 	if (unlikely(ret < 0))
130 		netdev_warn(dev->net,
131 			"Failed to write reg index 0x%08x: %d", index, ret);
132 
133 	kfree(buf);
134 
135 	return ret;
136 }
137 
138 /* Loop until the read is completed with timeout
139  * called with phy_mutex held */
140 static int smsc75xx_phy_wait_not_busy(struct usbnet *dev)
141 {
142 	unsigned long start_time = jiffies;
143 	u32 val;
144 	int ret;
145 
146 	do {
147 		ret = smsc75xx_read_reg(dev, MII_ACCESS, &val);
148 		check_warn_return(ret, "Error reading MII_ACCESS");
149 
150 		if (!(val & MII_ACCESS_BUSY))
151 			return 0;
152 	} while (!time_after(jiffies, start_time + HZ));
153 
154 	return -EIO;
155 }
156 
157 static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
158 {
159 	struct usbnet *dev = netdev_priv(netdev);
160 	u32 val, addr;
161 	int ret;
162 
163 	mutex_lock(&dev->phy_mutex);
164 
165 	/* confirm MII not busy */
166 	ret = smsc75xx_phy_wait_not_busy(dev);
167 	check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_read");
168 
169 	/* set the address, index & direction (read from PHY) */
170 	phy_id &= dev->mii.phy_id_mask;
171 	idx &= dev->mii.reg_num_mask;
172 	addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
173 		| ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
174 		| MII_ACCESS_READ | MII_ACCESS_BUSY;
175 	ret = smsc75xx_write_reg(dev, MII_ACCESS, addr);
176 	check_warn_goto_done(ret, "Error writing MII_ACCESS");
177 
178 	ret = smsc75xx_phy_wait_not_busy(dev);
179 	check_warn_goto_done(ret, "Timed out reading MII reg %02X", idx);
180 
181 	ret = smsc75xx_read_reg(dev, MII_DATA, &val);
182 	check_warn_goto_done(ret, "Error reading MII_DATA");
183 
184 	ret = (u16)(val & 0xFFFF);
185 
186 done:
187 	mutex_unlock(&dev->phy_mutex);
188 	return ret;
189 }
190 
191 static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
192 				int regval)
193 {
194 	struct usbnet *dev = netdev_priv(netdev);
195 	u32 val, addr;
196 	int ret;
197 
198 	mutex_lock(&dev->phy_mutex);
199 
200 	/* confirm MII not busy */
201 	ret = smsc75xx_phy_wait_not_busy(dev);
202 	check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_write");
203 
204 	val = regval;
205 	ret = smsc75xx_write_reg(dev, MII_DATA, val);
206 	check_warn_goto_done(ret, "Error writing MII_DATA");
207 
208 	/* set the address, index & direction (write to PHY) */
209 	phy_id &= dev->mii.phy_id_mask;
210 	idx &= dev->mii.reg_num_mask;
211 	addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
212 		| ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
213 		| MII_ACCESS_WRITE | MII_ACCESS_BUSY;
214 	ret = smsc75xx_write_reg(dev, MII_ACCESS, addr);
215 	check_warn_goto_done(ret, "Error writing MII_ACCESS");
216 
217 	ret = smsc75xx_phy_wait_not_busy(dev);
218 	check_warn_goto_done(ret, "Timed out writing MII reg %02X", idx);
219 
220 done:
221 	mutex_unlock(&dev->phy_mutex);
222 }
223 
224 static int smsc75xx_wait_eeprom(struct usbnet *dev)
225 {
226 	unsigned long start_time = jiffies;
227 	u32 val;
228 	int ret;
229 
230 	do {
231 		ret = smsc75xx_read_reg(dev, E2P_CMD, &val);
232 		check_warn_return(ret, "Error reading E2P_CMD");
233 
234 		if (!(val & E2P_CMD_BUSY) || (val & E2P_CMD_TIMEOUT))
235 			break;
236 		udelay(40);
237 	} while (!time_after(jiffies, start_time + HZ));
238 
239 	if (val & (E2P_CMD_TIMEOUT | E2P_CMD_BUSY)) {
240 		netdev_warn(dev->net, "EEPROM read operation timeout");
241 		return -EIO;
242 	}
243 
244 	return 0;
245 }
246 
247 static int smsc75xx_eeprom_confirm_not_busy(struct usbnet *dev)
248 {
249 	unsigned long start_time = jiffies;
250 	u32 val;
251 	int ret;
252 
253 	do {
254 		ret = smsc75xx_read_reg(dev, E2P_CMD, &val);
255 		check_warn_return(ret, "Error reading E2P_CMD");
256 
257 		if (!(val & E2P_CMD_BUSY))
258 			return 0;
259 
260 		udelay(40);
261 	} while (!time_after(jiffies, start_time + HZ));
262 
263 	netdev_warn(dev->net, "EEPROM is busy");
264 	return -EIO;
265 }
266 
267 static int smsc75xx_read_eeprom(struct usbnet *dev, u32 offset, u32 length,
268 				u8 *data)
269 {
270 	u32 val;
271 	int i, ret;
272 
273 	BUG_ON(!dev);
274 	BUG_ON(!data);
275 
276 	ret = smsc75xx_eeprom_confirm_not_busy(dev);
277 	if (ret)
278 		return ret;
279 
280 	for (i = 0; i < length; i++) {
281 		val = E2P_CMD_BUSY | E2P_CMD_READ | (offset & E2P_CMD_ADDR);
282 		ret = smsc75xx_write_reg(dev, E2P_CMD, val);
283 		check_warn_return(ret, "Error writing E2P_CMD");
284 
285 		ret = smsc75xx_wait_eeprom(dev);
286 		if (ret < 0)
287 			return ret;
288 
289 		ret = smsc75xx_read_reg(dev, E2P_DATA, &val);
290 		check_warn_return(ret, "Error reading E2P_DATA");
291 
292 		data[i] = val & 0xFF;
293 		offset++;
294 	}
295 
296 	return 0;
297 }
298 
299 static int smsc75xx_write_eeprom(struct usbnet *dev, u32 offset, u32 length,
300 				 u8 *data)
301 {
302 	u32 val;
303 	int i, ret;
304 
305 	BUG_ON(!dev);
306 	BUG_ON(!data);
307 
308 	ret = smsc75xx_eeprom_confirm_not_busy(dev);
309 	if (ret)
310 		return ret;
311 
312 	/* Issue write/erase enable command */
313 	val = E2P_CMD_BUSY | E2P_CMD_EWEN;
314 	ret = smsc75xx_write_reg(dev, E2P_CMD, val);
315 	check_warn_return(ret, "Error writing E2P_CMD");
316 
317 	ret = smsc75xx_wait_eeprom(dev);
318 	if (ret < 0)
319 		return ret;
320 
321 	for (i = 0; i < length; i++) {
322 
323 		/* Fill data register */
324 		val = data[i];
325 		ret = smsc75xx_write_reg(dev, E2P_DATA, val);
326 		check_warn_return(ret, "Error writing E2P_DATA");
327 
328 		/* Send "write" command */
329 		val = E2P_CMD_BUSY | E2P_CMD_WRITE | (offset & E2P_CMD_ADDR);
330 		ret = smsc75xx_write_reg(dev, E2P_CMD, val);
331 		check_warn_return(ret, "Error writing E2P_CMD");
332 
333 		ret = smsc75xx_wait_eeprom(dev);
334 		if (ret < 0)
335 			return ret;
336 
337 		offset++;
338 	}
339 
340 	return 0;
341 }
342 
343 static int smsc75xx_dataport_wait_not_busy(struct usbnet *dev)
344 {
345 	int i, ret;
346 
347 	for (i = 0; i < 100; i++) {
348 		u32 dp_sel;
349 		ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel);
350 		check_warn_return(ret, "Error reading DP_SEL");
351 
352 		if (dp_sel & DP_SEL_DPRDY)
353 			return 0;
354 
355 		udelay(40);
356 	}
357 
358 	netdev_warn(dev->net, "smsc75xx_dataport_wait_not_busy timed out");
359 
360 	return -EIO;
361 }
362 
363 static int smsc75xx_dataport_write(struct usbnet *dev, u32 ram_select, u32 addr,
364 				   u32 length, u32 *buf)
365 {
366 	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
367 	u32 dp_sel;
368 	int i, ret;
369 
370 	mutex_lock(&pdata->dataport_mutex);
371 
372 	ret = smsc75xx_dataport_wait_not_busy(dev);
373 	check_warn_goto_done(ret, "smsc75xx_dataport_write busy on entry");
374 
375 	ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel);
376 	check_warn_goto_done(ret, "Error reading DP_SEL");
377 
378 	dp_sel &= ~DP_SEL_RSEL;
379 	dp_sel |= ram_select;
380 	ret = smsc75xx_write_reg(dev, DP_SEL, dp_sel);
381 	check_warn_goto_done(ret, "Error writing DP_SEL");
382 
383 	for (i = 0; i < length; i++) {
384 		ret = smsc75xx_write_reg(dev, DP_ADDR, addr + i);
385 		check_warn_goto_done(ret, "Error writing DP_ADDR");
386 
387 		ret = smsc75xx_write_reg(dev, DP_DATA, buf[i]);
388 		check_warn_goto_done(ret, "Error writing DP_DATA");
389 
390 		ret = smsc75xx_write_reg(dev, DP_CMD, DP_CMD_WRITE);
391 		check_warn_goto_done(ret, "Error writing DP_CMD");
392 
393 		ret = smsc75xx_dataport_wait_not_busy(dev);
394 		check_warn_goto_done(ret, "smsc75xx_dataport_write timeout");
395 	}
396 
397 done:
398 	mutex_unlock(&pdata->dataport_mutex);
399 	return ret;
400 }
401 
402 /* returns hash bit number for given MAC address */
403 static u32 smsc75xx_hash(char addr[ETH_ALEN])
404 {
405 	return (ether_crc(ETH_ALEN, addr) >> 23) & 0x1ff;
406 }
407 
408 static void smsc75xx_deferred_multicast_write(struct work_struct *param)
409 {
410 	struct smsc75xx_priv *pdata =
411 		container_of(param, struct smsc75xx_priv, set_multicast);
412 	struct usbnet *dev = pdata->dev;
413 	int ret;
414 
415 	netif_dbg(dev, drv, dev->net, "deferred multicast write 0x%08x",
416 		pdata->rfe_ctl);
417 
418 	smsc75xx_dataport_write(dev, DP_SEL_VHF, DP_SEL_VHF_VLAN_LEN,
419 		DP_SEL_VHF_HASH_LEN, pdata->multicast_hash_table);
420 
421 	ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
422 	check_warn(ret, "Error writing RFE_CRL");
423 }
424 
425 static void smsc75xx_set_multicast(struct net_device *netdev)
426 {
427 	struct usbnet *dev = netdev_priv(netdev);
428 	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
429 	unsigned long flags;
430 	int i;
431 
432 	spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
433 
434 	pdata->rfe_ctl &=
435 		~(RFE_CTL_AU | RFE_CTL_AM | RFE_CTL_DPF | RFE_CTL_MHF);
436 	pdata->rfe_ctl |= RFE_CTL_AB;
437 
438 	for (i = 0; i < DP_SEL_VHF_HASH_LEN; i++)
439 		pdata->multicast_hash_table[i] = 0;
440 
441 	if (dev->net->flags & IFF_PROMISC) {
442 		netif_dbg(dev, drv, dev->net, "promiscuous mode enabled");
443 		pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_AU;
444 	} else if (dev->net->flags & IFF_ALLMULTI) {
445 		netif_dbg(dev, drv, dev->net, "receive all multicast enabled");
446 		pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_DPF;
447 	} else if (!netdev_mc_empty(dev->net)) {
448 		struct netdev_hw_addr *ha;
449 
450 		netif_dbg(dev, drv, dev->net, "receive multicast hash filter");
451 
452 		pdata->rfe_ctl |= RFE_CTL_MHF | RFE_CTL_DPF;
453 
454 		netdev_for_each_mc_addr(ha, netdev) {
455 			u32 bitnum = smsc75xx_hash(ha->addr);
456 			pdata->multicast_hash_table[bitnum / 32] |=
457 				(1 << (bitnum % 32));
458 		}
459 	} else {
460 		netif_dbg(dev, drv, dev->net, "receive own packets only");
461 		pdata->rfe_ctl |= RFE_CTL_DPF;
462 	}
463 
464 	spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
465 
466 	/* defer register writes to a sleepable context */
467 	schedule_work(&pdata->set_multicast);
468 }
469 
470 static int smsc75xx_update_flowcontrol(struct usbnet *dev, u8 duplex,
471 					    u16 lcladv, u16 rmtadv)
472 {
473 	u32 flow = 0, fct_flow = 0;
474 	int ret;
475 
476 	if (duplex == DUPLEX_FULL) {
477 		u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
478 
479 		if (cap & FLOW_CTRL_TX) {
480 			flow = (FLOW_TX_FCEN | 0xFFFF);
481 			/* set fct_flow thresholds to 20% and 80% */
482 			fct_flow = (8 << 8) | 32;
483 		}
484 
485 		if (cap & FLOW_CTRL_RX)
486 			flow |= FLOW_RX_FCEN;
487 
488 		netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s",
489 			(cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
490 			(cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
491 	} else {
492 		netif_dbg(dev, link, dev->net, "half duplex");
493 	}
494 
495 	ret = smsc75xx_write_reg(dev, FLOW, flow);
496 	check_warn_return(ret, "Error writing FLOW");
497 
498 	ret = smsc75xx_write_reg(dev, FCT_FLOW, fct_flow);
499 	check_warn_return(ret, "Error writing FCT_FLOW");
500 
501 	return 0;
502 }
503 
504 static int smsc75xx_link_reset(struct usbnet *dev)
505 {
506 	struct mii_if_info *mii = &dev->mii;
507 	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
508 	u16 lcladv, rmtadv;
509 	int ret;
510 
511 	/* read and write to clear phy interrupt status */
512 	ret = smsc75xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC);
513 	check_warn_return(ret, "Error reading PHY_INT_SRC");
514 	smsc75xx_mdio_write(dev->net, mii->phy_id, PHY_INT_SRC, 0xffff);
515 
516 	ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
517 	check_warn_return(ret, "Error writing INT_STS");
518 
519 	mii_check_media(mii, 1, 1);
520 	mii_ethtool_gset(&dev->mii, &ecmd);
521 	lcladv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE);
522 	rmtadv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_LPA);
523 
524 	netif_dbg(dev, link, dev->net, "speed: %u duplex: %d lcladv: %04x"
525 		  " rmtadv: %04x", ethtool_cmd_speed(&ecmd),
526 		  ecmd.duplex, lcladv, rmtadv);
527 
528 	return smsc75xx_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv);
529 }
530 
531 static void smsc75xx_status(struct usbnet *dev, struct urb *urb)
532 {
533 	u32 intdata;
534 
535 	if (urb->actual_length != 4) {
536 		netdev_warn(dev->net,
537 			"unexpected urb length %d", urb->actual_length);
538 		return;
539 	}
540 
541 	memcpy(&intdata, urb->transfer_buffer, 4);
542 	le32_to_cpus(&intdata);
543 
544 	netif_dbg(dev, link, dev->net, "intdata: 0x%08X", intdata);
545 
546 	if (intdata & INT_ENP_PHY_INT)
547 		usbnet_defer_kevent(dev, EVENT_LINK_RESET);
548 	else
549 		netdev_warn(dev->net,
550 			"unexpected interrupt, intdata=0x%08X", intdata);
551 }
552 
553 static int smsc75xx_ethtool_get_eeprom_len(struct net_device *net)
554 {
555 	return MAX_EEPROM_SIZE;
556 }
557 
558 static int smsc75xx_ethtool_get_eeprom(struct net_device *netdev,
559 				       struct ethtool_eeprom *ee, u8 *data)
560 {
561 	struct usbnet *dev = netdev_priv(netdev);
562 
563 	ee->magic = LAN75XX_EEPROM_MAGIC;
564 
565 	return smsc75xx_read_eeprom(dev, ee->offset, ee->len, data);
566 }
567 
568 static int smsc75xx_ethtool_set_eeprom(struct net_device *netdev,
569 				       struct ethtool_eeprom *ee, u8 *data)
570 {
571 	struct usbnet *dev = netdev_priv(netdev);
572 
573 	if (ee->magic != LAN75XX_EEPROM_MAGIC) {
574 		netdev_warn(dev->net,
575 			"EEPROM: magic value mismatch: 0x%x", ee->magic);
576 		return -EINVAL;
577 	}
578 
579 	return smsc75xx_write_eeprom(dev, ee->offset, ee->len, data);
580 }
581 
582 static const struct ethtool_ops smsc75xx_ethtool_ops = {
583 	.get_link	= usbnet_get_link,
584 	.nway_reset	= usbnet_nway_reset,
585 	.get_drvinfo	= usbnet_get_drvinfo,
586 	.get_msglevel	= usbnet_get_msglevel,
587 	.set_msglevel	= usbnet_set_msglevel,
588 	.get_settings	= usbnet_get_settings,
589 	.set_settings	= usbnet_set_settings,
590 	.get_eeprom_len	= smsc75xx_ethtool_get_eeprom_len,
591 	.get_eeprom	= smsc75xx_ethtool_get_eeprom,
592 	.set_eeprom	= smsc75xx_ethtool_set_eeprom,
593 };
594 
595 static int smsc75xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
596 {
597 	struct usbnet *dev = netdev_priv(netdev);
598 
599 	if (!netif_running(netdev))
600 		return -EINVAL;
601 
602 	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
603 }
604 
605 static void smsc75xx_init_mac_address(struct usbnet *dev)
606 {
607 	/* try reading mac address from EEPROM */
608 	if (smsc75xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
609 			dev->net->dev_addr) == 0) {
610 		if (is_valid_ether_addr(dev->net->dev_addr)) {
611 			/* eeprom values are valid so use them */
612 			netif_dbg(dev, ifup, dev->net,
613 				"MAC address read from EEPROM");
614 			return;
615 		}
616 	}
617 
618 	/* no eeprom, or eeprom values are invalid. generate random MAC */
619 	eth_hw_addr_random(dev->net);
620 	netif_dbg(dev, ifup, dev->net, "MAC address set to random_ether_addr");
621 }
622 
623 static int smsc75xx_set_mac_address(struct usbnet *dev)
624 {
625 	u32 addr_lo = dev->net->dev_addr[0] | dev->net->dev_addr[1] << 8 |
626 		dev->net->dev_addr[2] << 16 | dev->net->dev_addr[3] << 24;
627 	u32 addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8;
628 
629 	int ret = smsc75xx_write_reg(dev, RX_ADDRH, addr_hi);
630 	check_warn_return(ret, "Failed to write RX_ADDRH: %d", ret);
631 
632 	ret = smsc75xx_write_reg(dev, RX_ADDRL, addr_lo);
633 	check_warn_return(ret, "Failed to write RX_ADDRL: %d", ret);
634 
635 	addr_hi |= ADDR_FILTX_FB_VALID;
636 	ret = smsc75xx_write_reg(dev, ADDR_FILTX, addr_hi);
637 	check_warn_return(ret, "Failed to write ADDR_FILTX: %d", ret);
638 
639 	ret = smsc75xx_write_reg(dev, ADDR_FILTX + 4, addr_lo);
640 	check_warn_return(ret, "Failed to write ADDR_FILTX+4: %d", ret);
641 
642 	return 0;
643 }
644 
645 static int smsc75xx_phy_initialize(struct usbnet *dev)
646 {
647 	int bmcr, ret, timeout = 0;
648 
649 	/* Initialize MII structure */
650 	dev->mii.dev = dev->net;
651 	dev->mii.mdio_read = smsc75xx_mdio_read;
652 	dev->mii.mdio_write = smsc75xx_mdio_write;
653 	dev->mii.phy_id_mask = 0x1f;
654 	dev->mii.reg_num_mask = 0x1f;
655 	dev->mii.supports_gmii = 1;
656 	dev->mii.phy_id = SMSC75XX_INTERNAL_PHY_ID;
657 
658 	/* reset phy and wait for reset to complete */
659 	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
660 
661 	do {
662 		msleep(10);
663 		bmcr = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR);
664 		check_warn_return(bmcr, "Error reading MII_BMCR");
665 		timeout++;
666 	} while ((bmcr & BMCR_RESET) && (timeout < 100));
667 
668 	if (timeout >= 100) {
669 		netdev_warn(dev->net, "timeout on PHY Reset");
670 		return -EIO;
671 	}
672 
673 	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
674 		ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP |
675 		ADVERTISE_PAUSE_ASYM);
676 	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
677 		ADVERTISE_1000FULL);
678 
679 	/* read and write to clear phy interrupt status */
680 	ret = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC);
681 	check_warn_return(ret, "Error reading PHY_INT_SRC");
682 	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_SRC, 0xffff);
683 
684 	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK,
685 		PHY_INT_MASK_DEFAULT);
686 	mii_nway_restart(&dev->mii);
687 
688 	netif_dbg(dev, ifup, dev->net, "phy initialised successfully");
689 	return 0;
690 }
691 
692 static int smsc75xx_set_rx_max_frame_length(struct usbnet *dev, int size)
693 {
694 	int ret = 0;
695 	u32 buf;
696 	bool rxenabled;
697 
698 	ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
699 	check_warn_return(ret, "Failed to read MAC_RX: %d", ret);
700 
701 	rxenabled = ((buf & MAC_RX_RXEN) != 0);
702 
703 	if (rxenabled) {
704 		buf &= ~MAC_RX_RXEN;
705 		ret = smsc75xx_write_reg(dev, MAC_RX, buf);
706 		check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
707 	}
708 
709 	/* add 4 to size for FCS */
710 	buf &= ~MAC_RX_MAX_SIZE;
711 	buf |= (((size + 4) << MAC_RX_MAX_SIZE_SHIFT) & MAC_RX_MAX_SIZE);
712 
713 	ret = smsc75xx_write_reg(dev, MAC_RX, buf);
714 	check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
715 
716 	if (rxenabled) {
717 		buf |= MAC_RX_RXEN;
718 		ret = smsc75xx_write_reg(dev, MAC_RX, buf);
719 		check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
720 	}
721 
722 	return 0;
723 }
724 
725 static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu)
726 {
727 	struct usbnet *dev = netdev_priv(netdev);
728 
729 	int ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu);
730 	check_warn_return(ret, "Failed to set mac rx frame length");
731 
732 	return usbnet_change_mtu(netdev, new_mtu);
733 }
734 
735 /* Enable or disable Rx checksum offload engine */
736 static int smsc75xx_set_features(struct net_device *netdev,
737 	netdev_features_t features)
738 {
739 	struct usbnet *dev = netdev_priv(netdev);
740 	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
741 	unsigned long flags;
742 	int ret;
743 
744 	spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
745 
746 	if (features & NETIF_F_RXCSUM)
747 		pdata->rfe_ctl |= RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM;
748 	else
749 		pdata->rfe_ctl &= ~(RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM);
750 
751 	spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
752 	/* it's racing here! */
753 
754 	ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
755 	check_warn_return(ret, "Error writing RFE_CTL");
756 
757 	return 0;
758 }
759 
760 static int smsc75xx_reset(struct usbnet *dev)
761 {
762 	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
763 	u32 buf;
764 	int ret = 0, timeout;
765 
766 	netif_dbg(dev, ifup, dev->net, "entering smsc75xx_reset");
767 
768 	ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
769 	check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
770 
771 	buf |= HW_CFG_LRST;
772 
773 	ret = smsc75xx_write_reg(dev, HW_CFG, buf);
774 	check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
775 
776 	timeout = 0;
777 	do {
778 		msleep(10);
779 		ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
780 		check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
781 		timeout++;
782 	} while ((buf & HW_CFG_LRST) && (timeout < 100));
783 
784 	if (timeout >= 100) {
785 		netdev_warn(dev->net, "timeout on completion of Lite Reset");
786 		return -EIO;
787 	}
788 
789 	netif_dbg(dev, ifup, dev->net, "Lite reset complete, resetting PHY");
790 
791 	ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
792 	check_warn_return(ret, "Failed to read PMT_CTL: %d", ret);
793 
794 	buf |= PMT_CTL_PHY_RST;
795 
796 	ret = smsc75xx_write_reg(dev, PMT_CTL, buf);
797 	check_warn_return(ret, "Failed to write PMT_CTL: %d", ret);
798 
799 	timeout = 0;
800 	do {
801 		msleep(10);
802 		ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
803 		check_warn_return(ret, "Failed to read PMT_CTL: %d", ret);
804 		timeout++;
805 	} while ((buf & PMT_CTL_PHY_RST) && (timeout < 100));
806 
807 	if (timeout >= 100) {
808 		netdev_warn(dev->net, "timeout waiting for PHY Reset");
809 		return -EIO;
810 	}
811 
812 	netif_dbg(dev, ifup, dev->net, "PHY reset complete");
813 
814 	smsc75xx_init_mac_address(dev);
815 
816 	ret = smsc75xx_set_mac_address(dev);
817 	check_warn_return(ret, "Failed to set mac address");
818 
819 	netif_dbg(dev, ifup, dev->net, "MAC Address: %pM", dev->net->dev_addr);
820 
821 	ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
822 	check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
823 
824 	netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x", buf);
825 
826 	buf |= HW_CFG_BIR;
827 
828 	ret = smsc75xx_write_reg(dev, HW_CFG, buf);
829 	check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
830 
831 	ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
832 	check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
833 
834 	netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG after "
835 			"writing HW_CFG_BIR: 0x%08x", buf);
836 
837 	if (!turbo_mode) {
838 		buf = 0;
839 		dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
840 	} else if (dev->udev->speed == USB_SPEED_HIGH) {
841 		buf = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
842 		dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
843 	} else {
844 		buf = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
845 		dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
846 	}
847 
848 	netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld",
849 		(ulong)dev->rx_urb_size);
850 
851 	ret = smsc75xx_write_reg(dev, BURST_CAP, buf);
852 	check_warn_return(ret, "Failed to write BURST_CAP: %d", ret);
853 
854 	ret = smsc75xx_read_reg(dev, BURST_CAP, &buf);
855 	check_warn_return(ret, "Failed to read BURST_CAP: %d", ret);
856 
857 	netif_dbg(dev, ifup, dev->net,
858 		"Read Value from BURST_CAP after writing: 0x%08x", buf);
859 
860 	ret = smsc75xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY);
861 	check_warn_return(ret, "Failed to write BULK_IN_DLY: %d", ret);
862 
863 	ret = smsc75xx_read_reg(dev, BULK_IN_DLY, &buf);
864 	check_warn_return(ret, "Failed to read BULK_IN_DLY: %d", ret);
865 
866 	netif_dbg(dev, ifup, dev->net,
867 		"Read Value from BULK_IN_DLY after writing: 0x%08x", buf);
868 
869 	if (turbo_mode) {
870 		ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
871 		check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
872 
873 		netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x", buf);
874 
875 		buf |= (HW_CFG_MEF | HW_CFG_BCE);
876 
877 		ret = smsc75xx_write_reg(dev, HW_CFG, buf);
878 		check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
879 
880 		ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
881 		check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
882 
883 		netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x", buf);
884 	}
885 
886 	/* set FIFO sizes */
887 	buf = (MAX_RX_FIFO_SIZE - 512) / 512;
888 	ret = smsc75xx_write_reg(dev, FCT_RX_FIFO_END, buf);
889 	check_warn_return(ret, "Failed to write FCT_RX_FIFO_END: %d", ret);
890 
891 	netif_dbg(dev, ifup, dev->net, "FCT_RX_FIFO_END set to 0x%08x", buf);
892 
893 	buf = (MAX_TX_FIFO_SIZE - 512) / 512;
894 	ret = smsc75xx_write_reg(dev, FCT_TX_FIFO_END, buf);
895 	check_warn_return(ret, "Failed to write FCT_TX_FIFO_END: %d", ret);
896 
897 	netif_dbg(dev, ifup, dev->net, "FCT_TX_FIFO_END set to 0x%08x", buf);
898 
899 	ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
900 	check_warn_return(ret, "Failed to write INT_STS: %d", ret);
901 
902 	ret = smsc75xx_read_reg(dev, ID_REV, &buf);
903 	check_warn_return(ret, "Failed to read ID_REV: %d", ret);
904 
905 	netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x", buf);
906 
907 	/* Configure GPIO pins as LED outputs */
908 	ret = smsc75xx_read_reg(dev, LED_GPIO_CFG, &buf);
909 	check_warn_return(ret, "Failed to read LED_GPIO_CFG: %d", ret);
910 
911 	buf &= ~(LED_GPIO_CFG_LED2_FUN_SEL | LED_GPIO_CFG_LED10_FUN_SEL);
912 	buf |= LED_GPIO_CFG_LEDGPIO_EN | LED_GPIO_CFG_LED2_FUN_SEL;
913 
914 	ret = smsc75xx_write_reg(dev, LED_GPIO_CFG, buf);
915 	check_warn_return(ret, "Failed to write LED_GPIO_CFG: %d", ret);
916 
917 	ret = smsc75xx_write_reg(dev, FLOW, 0);
918 	check_warn_return(ret, "Failed to write FLOW: %d", ret);
919 
920 	ret = smsc75xx_write_reg(dev, FCT_FLOW, 0);
921 	check_warn_return(ret, "Failed to write FCT_FLOW: %d", ret);
922 
923 	/* Don't need rfe_ctl_lock during initialisation */
924 	ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
925 	check_warn_return(ret, "Failed to read RFE_CTL: %d", ret);
926 
927 	pdata->rfe_ctl |= RFE_CTL_AB | RFE_CTL_DPF;
928 
929 	ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
930 	check_warn_return(ret, "Failed to write RFE_CTL: %d", ret);
931 
932 	ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
933 	check_warn_return(ret, "Failed to read RFE_CTL: %d", ret);
934 
935 	netif_dbg(dev, ifup, dev->net, "RFE_CTL set to 0x%08x", pdata->rfe_ctl);
936 
937 	/* Enable or disable checksum offload engines */
938 	smsc75xx_set_features(dev->net, dev->net->features);
939 
940 	smsc75xx_set_multicast(dev->net);
941 
942 	ret = smsc75xx_phy_initialize(dev);
943 	check_warn_return(ret, "Failed to initialize PHY: %d", ret);
944 
945 	ret = smsc75xx_read_reg(dev, INT_EP_CTL, &buf);
946 	check_warn_return(ret, "Failed to read INT_EP_CTL: %d", ret);
947 
948 	/* enable PHY interrupts */
949 	buf |= INT_ENP_PHY_INT;
950 
951 	ret = smsc75xx_write_reg(dev, INT_EP_CTL, buf);
952 	check_warn_return(ret, "Failed to write INT_EP_CTL: %d", ret);
953 
954 	/* allow mac to detect speed and duplex from phy */
955 	ret = smsc75xx_read_reg(dev, MAC_CR, &buf);
956 	check_warn_return(ret, "Failed to read MAC_CR: %d", ret);
957 
958 	buf |= (MAC_CR_ADD | MAC_CR_ASD);
959 	ret = smsc75xx_write_reg(dev, MAC_CR, buf);
960 	check_warn_return(ret, "Failed to write MAC_CR: %d", ret);
961 
962 	ret = smsc75xx_read_reg(dev, MAC_TX, &buf);
963 	check_warn_return(ret, "Failed to read MAC_TX: %d", ret);
964 
965 	buf |= MAC_TX_TXEN;
966 
967 	ret = smsc75xx_write_reg(dev, MAC_TX, buf);
968 	check_warn_return(ret, "Failed to write MAC_TX: %d", ret);
969 
970 	netif_dbg(dev, ifup, dev->net, "MAC_TX set to 0x%08x", buf);
971 
972 	ret = smsc75xx_read_reg(dev, FCT_TX_CTL, &buf);
973 	check_warn_return(ret, "Failed to read FCT_TX_CTL: %d", ret);
974 
975 	buf |= FCT_TX_CTL_EN;
976 
977 	ret = smsc75xx_write_reg(dev, FCT_TX_CTL, buf);
978 	check_warn_return(ret, "Failed to write FCT_TX_CTL: %d", ret);
979 
980 	netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x", buf);
981 
982 	ret = smsc75xx_set_rx_max_frame_length(dev, 1514);
983 	check_warn_return(ret, "Failed to set max rx frame length");
984 
985 	ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
986 	check_warn_return(ret, "Failed to read MAC_RX: %d", ret);
987 
988 	buf |= MAC_RX_RXEN;
989 
990 	ret = smsc75xx_write_reg(dev, MAC_RX, buf);
991 	check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
992 
993 	netif_dbg(dev, ifup, dev->net, "MAC_RX set to 0x%08x", buf);
994 
995 	ret = smsc75xx_read_reg(dev, FCT_RX_CTL, &buf);
996 	check_warn_return(ret, "Failed to read FCT_RX_CTL: %d", ret);
997 
998 	buf |= FCT_RX_CTL_EN;
999 
1000 	ret = smsc75xx_write_reg(dev, FCT_RX_CTL, buf);
1001 	check_warn_return(ret, "Failed to write FCT_RX_CTL: %d", ret);
1002 
1003 	netif_dbg(dev, ifup, dev->net, "FCT_RX_CTL set to 0x%08x", buf);
1004 
1005 	netif_dbg(dev, ifup, dev->net, "smsc75xx_reset, return 0");
1006 	return 0;
1007 }
1008 
1009 static const struct net_device_ops smsc75xx_netdev_ops = {
1010 	.ndo_open		= usbnet_open,
1011 	.ndo_stop		= usbnet_stop,
1012 	.ndo_start_xmit		= usbnet_start_xmit,
1013 	.ndo_tx_timeout		= usbnet_tx_timeout,
1014 	.ndo_change_mtu		= smsc75xx_change_mtu,
1015 	.ndo_set_mac_address 	= eth_mac_addr,
1016 	.ndo_validate_addr	= eth_validate_addr,
1017 	.ndo_do_ioctl 		= smsc75xx_ioctl,
1018 	.ndo_set_rx_mode	= smsc75xx_set_multicast,
1019 	.ndo_set_features	= smsc75xx_set_features,
1020 };
1021 
1022 static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
1023 {
1024 	struct smsc75xx_priv *pdata = NULL;
1025 	int ret;
1026 
1027 	printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n");
1028 
1029 	ret = usbnet_get_endpoints(dev, intf);
1030 	check_warn_return(ret, "usbnet_get_endpoints failed: %d", ret);
1031 
1032 	dev->data[0] = (unsigned long)kzalloc(sizeof(struct smsc75xx_priv),
1033 		GFP_KERNEL);
1034 
1035 	pdata = (struct smsc75xx_priv *)(dev->data[0]);
1036 	if (!pdata) {
1037 		netdev_warn(dev->net, "Unable to allocate smsc75xx_priv");
1038 		return -ENOMEM;
1039 	}
1040 
1041 	pdata->dev = dev;
1042 
1043 	spin_lock_init(&pdata->rfe_ctl_lock);
1044 	mutex_init(&pdata->dataport_mutex);
1045 
1046 	INIT_WORK(&pdata->set_multicast, smsc75xx_deferred_multicast_write);
1047 
1048 	if (DEFAULT_TX_CSUM_ENABLE) {
1049 		dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
1050 		if (DEFAULT_TSO_ENABLE)
1051 			dev->net->features |= NETIF_F_SG |
1052 				NETIF_F_TSO | NETIF_F_TSO6;
1053 	}
1054 	if (DEFAULT_RX_CSUM_ENABLE)
1055 		dev->net->features |= NETIF_F_RXCSUM;
1056 
1057 	dev->net->hw_features = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
1058 		NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_RXCSUM;
1059 
1060 	/* Init all registers */
1061 	ret = smsc75xx_reset(dev);
1062 
1063 	dev->net->netdev_ops = &smsc75xx_netdev_ops;
1064 	dev->net->ethtool_ops = &smsc75xx_ethtool_ops;
1065 	dev->net->flags |= IFF_MULTICAST;
1066 	dev->net->hard_header_len += SMSC75XX_TX_OVERHEAD;
1067 	dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
1068 	return 0;
1069 }
1070 
1071 static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf)
1072 {
1073 	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
1074 	if (pdata) {
1075 		netif_dbg(dev, ifdown, dev->net, "free pdata");
1076 		kfree(pdata);
1077 		pdata = NULL;
1078 		dev->data[0] = 0;
1079 	}
1080 }
1081 
1082 static void smsc75xx_rx_csum_offload(struct usbnet *dev, struct sk_buff *skb,
1083 				     u32 rx_cmd_a, u32 rx_cmd_b)
1084 {
1085 	if (!(dev->net->features & NETIF_F_RXCSUM) ||
1086 	    unlikely(rx_cmd_a & RX_CMD_A_LCSM)) {
1087 		skb->ip_summed = CHECKSUM_NONE;
1088 	} else {
1089 		skb->csum = ntohs((u16)(rx_cmd_b >> RX_CMD_B_CSUM_SHIFT));
1090 		skb->ip_summed = CHECKSUM_COMPLETE;
1091 	}
1092 }
1093 
1094 static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
1095 {
1096 	while (skb->len > 0) {
1097 		u32 rx_cmd_a, rx_cmd_b, align_count, size;
1098 		struct sk_buff *ax_skb;
1099 		unsigned char *packet;
1100 
1101 		memcpy(&rx_cmd_a, skb->data, sizeof(rx_cmd_a));
1102 		le32_to_cpus(&rx_cmd_a);
1103 		skb_pull(skb, 4);
1104 
1105 		memcpy(&rx_cmd_b, skb->data, sizeof(rx_cmd_b));
1106 		le32_to_cpus(&rx_cmd_b);
1107 		skb_pull(skb, 4 + RXW_PADDING);
1108 
1109 		packet = skb->data;
1110 
1111 		/* get the packet length */
1112 		size = (rx_cmd_a & RX_CMD_A_LEN) - RXW_PADDING;
1113 		align_count = (4 - ((size + RXW_PADDING) % 4)) % 4;
1114 
1115 		if (unlikely(rx_cmd_a & RX_CMD_A_RED)) {
1116 			netif_dbg(dev, rx_err, dev->net,
1117 				"Error rx_cmd_a=0x%08x", rx_cmd_a);
1118 			dev->net->stats.rx_errors++;
1119 			dev->net->stats.rx_dropped++;
1120 
1121 			if (rx_cmd_a & RX_CMD_A_FCS)
1122 				dev->net->stats.rx_crc_errors++;
1123 			else if (rx_cmd_a & (RX_CMD_A_LONG | RX_CMD_A_RUNT))
1124 				dev->net->stats.rx_frame_errors++;
1125 		} else {
1126 			/* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
1127 			if (unlikely(size > (ETH_FRAME_LEN + 12))) {
1128 				netif_dbg(dev, rx_err, dev->net,
1129 					"size err rx_cmd_a=0x%08x", rx_cmd_a);
1130 				return 0;
1131 			}
1132 
1133 			/* last frame in this batch */
1134 			if (skb->len == size) {
1135 				smsc75xx_rx_csum_offload(dev, skb, rx_cmd_a,
1136 					rx_cmd_b);
1137 
1138 				skb_trim(skb, skb->len - 4); /* remove fcs */
1139 				skb->truesize = size + sizeof(struct sk_buff);
1140 
1141 				return 1;
1142 			}
1143 
1144 			ax_skb = skb_clone(skb, GFP_ATOMIC);
1145 			if (unlikely(!ax_skb)) {
1146 				netdev_warn(dev->net, "Error allocating skb");
1147 				return 0;
1148 			}
1149 
1150 			ax_skb->len = size;
1151 			ax_skb->data = packet;
1152 			skb_set_tail_pointer(ax_skb, size);
1153 
1154 			smsc75xx_rx_csum_offload(dev, ax_skb, rx_cmd_a,
1155 				rx_cmd_b);
1156 
1157 			skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
1158 			ax_skb->truesize = size + sizeof(struct sk_buff);
1159 
1160 			usbnet_skb_return(dev, ax_skb);
1161 		}
1162 
1163 		skb_pull(skb, size);
1164 
1165 		/* padding bytes before the next frame starts */
1166 		if (skb->len)
1167 			skb_pull(skb, align_count);
1168 	}
1169 
1170 	if (unlikely(skb->len < 0)) {
1171 		netdev_warn(dev->net, "invalid rx length<0 %d", skb->len);
1172 		return 0;
1173 	}
1174 
1175 	return 1;
1176 }
1177 
1178 static struct sk_buff *smsc75xx_tx_fixup(struct usbnet *dev,
1179 					 struct sk_buff *skb, gfp_t flags)
1180 {
1181 	u32 tx_cmd_a, tx_cmd_b;
1182 
1183 	skb_linearize(skb);
1184 
1185 	if (skb_headroom(skb) < SMSC75XX_TX_OVERHEAD) {
1186 		struct sk_buff *skb2 =
1187 			skb_copy_expand(skb, SMSC75XX_TX_OVERHEAD, 0, flags);
1188 		dev_kfree_skb_any(skb);
1189 		skb = skb2;
1190 		if (!skb)
1191 			return NULL;
1192 	}
1193 
1194 	tx_cmd_a = (u32)(skb->len & TX_CMD_A_LEN) | TX_CMD_A_FCS;
1195 
1196 	if (skb->ip_summed == CHECKSUM_PARTIAL)
1197 		tx_cmd_a |= TX_CMD_A_IPE | TX_CMD_A_TPE;
1198 
1199 	if (skb_is_gso(skb)) {
1200 		u16 mss = max(skb_shinfo(skb)->gso_size, TX_MSS_MIN);
1201 		tx_cmd_b = (mss << TX_CMD_B_MSS_SHIFT) & TX_CMD_B_MSS;
1202 
1203 		tx_cmd_a |= TX_CMD_A_LSO;
1204 	} else {
1205 		tx_cmd_b = 0;
1206 	}
1207 
1208 	skb_push(skb, 4);
1209 	cpu_to_le32s(&tx_cmd_b);
1210 	memcpy(skb->data, &tx_cmd_b, 4);
1211 
1212 	skb_push(skb, 4);
1213 	cpu_to_le32s(&tx_cmd_a);
1214 	memcpy(skb->data, &tx_cmd_a, 4);
1215 
1216 	return skb;
1217 }
1218 
1219 static const struct driver_info smsc75xx_info = {
1220 	.description	= "smsc75xx USB 2.0 Gigabit Ethernet",
1221 	.bind		= smsc75xx_bind,
1222 	.unbind		= smsc75xx_unbind,
1223 	.link_reset	= smsc75xx_link_reset,
1224 	.reset		= smsc75xx_reset,
1225 	.rx_fixup	= smsc75xx_rx_fixup,
1226 	.tx_fixup	= smsc75xx_tx_fixup,
1227 	.status		= smsc75xx_status,
1228 	.flags		= FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR,
1229 };
1230 
1231 static const struct usb_device_id products[] = {
1232 	{
1233 		/* SMSC7500 USB Gigabit Ethernet Device */
1234 		USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7500),
1235 		.driver_info = (unsigned long) &smsc75xx_info,
1236 	},
1237 	{
1238 		/* SMSC7500 USB Gigabit Ethernet Device */
1239 		USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7505),
1240 		.driver_info = (unsigned long) &smsc75xx_info,
1241 	},
1242 	{ },		/* END */
1243 };
1244 MODULE_DEVICE_TABLE(usb, products);
1245 
1246 static struct usb_driver smsc75xx_driver = {
1247 	.name		= SMSC_CHIPNAME,
1248 	.id_table	= products,
1249 	.probe		= usbnet_probe,
1250 	.suspend	= usbnet_suspend,
1251 	.resume		= usbnet_resume,
1252 	.disconnect	= usbnet_disconnect,
1253 };
1254 
1255 module_usb_driver(smsc75xx_driver);
1256 
1257 MODULE_AUTHOR("Nancy Lin");
1258 MODULE_AUTHOR("Steve Glendinning <steve.glendinning@smsc.com>");
1259 MODULE_DESCRIPTION("SMSC75XX USB 2.0 Gigabit Ethernet Devices");
1260 MODULE_LICENSE("GPL");
1261