1 /* 2 * Copyright (c) 2002 Petko Manolov (petkan@users.sourceforge.net) 3 * 4 * This program is free software; you can redistribute it and/or 5 * modify it under the terms of the GNU General Public License 6 * version 2 as published by the Free Software Foundation. 7 */ 8 9 #include <linux/init.h> 10 #include <linux/signal.h> 11 #include <linux/slab.h> 12 #include <linux/module.h> 13 #include <linux/netdevice.h> 14 #include <linux/etherdevice.h> 15 #include <linux/mii.h> 16 #include <linux/ethtool.h> 17 #include <linux/usb.h> 18 #include <asm/uaccess.h> 19 20 /* Version Information */ 21 #define DRIVER_VERSION "v0.6.2 (2004/08/27)" 22 #define DRIVER_AUTHOR "Petko Manolov <petkan@users.sourceforge.net>" 23 #define DRIVER_DESC "rtl8150 based usb-ethernet driver" 24 25 #define IDR 0x0120 26 #define MAR 0x0126 27 #define CR 0x012e 28 #define TCR 0x012f 29 #define RCR 0x0130 30 #define TSR 0x0132 31 #define RSR 0x0133 32 #define CON0 0x0135 33 #define CON1 0x0136 34 #define MSR 0x0137 35 #define PHYADD 0x0138 36 #define PHYDAT 0x0139 37 #define PHYCNT 0x013b 38 #define GPPC 0x013d 39 #define BMCR 0x0140 40 #define BMSR 0x0142 41 #define ANAR 0x0144 42 #define ANLP 0x0146 43 #define AER 0x0148 44 #define CSCR 0x014C /* This one has the link status */ 45 #define CSCR_LINK_STATUS (1 << 3) 46 47 #define IDR_EEPROM 0x1202 48 49 #define PHY_READ 0 50 #define PHY_WRITE 0x20 51 #define PHY_GO 0x40 52 53 #define MII_TIMEOUT 10 54 #define INTBUFSIZE 8 55 56 #define RTL8150_REQT_READ 0xc0 57 #define RTL8150_REQT_WRITE 0x40 58 #define RTL8150_REQ_GET_REGS 0x05 59 #define RTL8150_REQ_SET_REGS 0x05 60 61 62 /* Transmit status register errors */ 63 #define TSR_ECOL (1<<5) 64 #define TSR_LCOL (1<<4) 65 #define TSR_LOSS_CRS (1<<3) 66 #define TSR_JBR (1<<2) 67 #define TSR_ERRORS (TSR_ECOL | TSR_LCOL | TSR_LOSS_CRS | TSR_JBR) 68 /* Receive status register errors */ 69 #define RSR_CRC (1<<2) 70 #define RSR_FAE (1<<1) 71 #define RSR_ERRORS (RSR_CRC | RSR_FAE) 72 73 /* Media status register definitions */ 74 #define MSR_DUPLEX (1<<4) 75 #define MSR_SPEED (1<<3) 76 #define MSR_LINK (1<<2) 77 78 /* Interrupt pipe data */ 79 #define INT_TSR 0x00 80 #define INT_RSR 0x01 81 #define INT_MSR 0x02 82 #define INT_WAKSR 0x03 83 #define INT_TXOK_CNT 0x04 84 #define INT_RXLOST_CNT 0x05 85 #define INT_CRERR_CNT 0x06 86 #define INT_COL_CNT 0x07 87 88 /* Transmit status register errors */ 89 #define TSR_ECOL (1<<5) 90 #define TSR_LCOL (1<<4) 91 #define TSR_LOSS_CRS (1<<3) 92 #define TSR_JBR (1<<2) 93 #define TSR_ERRORS (TSR_ECOL | TSR_LCOL | TSR_LOSS_CRS | TSR_JBR) 94 /* Receive status register errors */ 95 #define RSR_CRC (1<<2) 96 #define RSR_FAE (1<<1) 97 #define RSR_ERRORS (RSR_CRC | RSR_FAE) 98 99 /* Media status register definitions */ 100 #define MSR_DUPLEX (1<<4) 101 #define MSR_SPEED (1<<3) 102 #define MSR_LINK (1<<2) 103 104 /* Interrupt pipe data */ 105 #define INT_TSR 0x00 106 #define INT_RSR 0x01 107 #define INT_MSR 0x02 108 #define INT_WAKSR 0x03 109 #define INT_TXOK_CNT 0x04 110 #define INT_RXLOST_CNT 0x05 111 #define INT_CRERR_CNT 0x06 112 #define INT_COL_CNT 0x07 113 114 115 #define RTL8150_MTU 1540 116 #define RTL8150_TX_TIMEOUT (HZ) 117 #define RX_SKB_POOL_SIZE 4 118 119 /* rtl8150 flags */ 120 #define RTL8150_HW_CRC 0 121 #define RX_REG_SET 1 122 #define RTL8150_UNPLUG 2 123 #define RX_URB_FAIL 3 124 125 /* Define these values to match your device */ 126 #define VENDOR_ID_REALTEK 0x0bda 127 #define VENDOR_ID_MELCO 0x0411 128 #define VENDOR_ID_MICRONET 0x3980 129 #define VENDOR_ID_LONGSHINE 0x07b8 130 #define VENDOR_ID_OQO 0x1557 131 #define VENDOR_ID_ZYXEL 0x0586 132 133 #define PRODUCT_ID_RTL8150 0x8150 134 #define PRODUCT_ID_LUAKTX 0x0012 135 #define PRODUCT_ID_LCS8138TX 0x401a 136 #define PRODUCT_ID_SP128AR 0x0003 137 #define PRODUCT_ID_PRESTIGE 0x401a 138 139 #undef EEPROM_WRITE 140 141 /* table of devices that work with this driver */ 142 static struct usb_device_id rtl8150_table[] = { 143 {USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8150)}, 144 {USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)}, 145 {USB_DEVICE(VENDOR_ID_MICRONET, PRODUCT_ID_SP128AR)}, 146 {USB_DEVICE(VENDOR_ID_LONGSHINE, PRODUCT_ID_LCS8138TX)}, 147 {USB_DEVICE(VENDOR_ID_OQO, PRODUCT_ID_RTL8150)}, 148 {USB_DEVICE(VENDOR_ID_ZYXEL, PRODUCT_ID_PRESTIGE)}, 149 {} 150 }; 151 152 MODULE_DEVICE_TABLE(usb, rtl8150_table); 153 154 struct rtl8150 { 155 unsigned long flags; 156 struct usb_device *udev; 157 struct tasklet_struct tl; 158 struct net_device *netdev; 159 struct urb *rx_urb, *tx_urb, *intr_urb, *ctrl_urb; 160 struct sk_buff *tx_skb, *rx_skb; 161 struct sk_buff *rx_skb_pool[RX_SKB_POOL_SIZE]; 162 spinlock_t rx_pool_lock; 163 struct usb_ctrlrequest dr; 164 int intr_interval; 165 __le16 rx_creg; 166 u8 *intr_buff; 167 u8 phy; 168 }; 169 170 typedef struct rtl8150 rtl8150_t; 171 172 static void fill_skb_pool(rtl8150_t *); 173 static void free_skb_pool(rtl8150_t *); 174 static inline struct sk_buff *pull_skb(rtl8150_t *); 175 static void rtl8150_disconnect(struct usb_interface *intf); 176 static int rtl8150_probe(struct usb_interface *intf, 177 const struct usb_device_id *id); 178 static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message); 179 static int rtl8150_resume(struct usb_interface *intf); 180 181 static const char driver_name [] = "rtl8150"; 182 183 static struct usb_driver rtl8150_driver = { 184 .name = driver_name, 185 .probe = rtl8150_probe, 186 .disconnect = rtl8150_disconnect, 187 .id_table = rtl8150_table, 188 .suspend = rtl8150_suspend, 189 .resume = rtl8150_resume 190 }; 191 192 /* 193 ** 194 ** device related part of the code 195 ** 196 */ 197 static int get_registers(rtl8150_t * dev, u16 indx, u16 size, void *data) 198 { 199 return usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), 200 RTL8150_REQ_GET_REGS, RTL8150_REQT_READ, 201 indx, 0, data, size, 500); 202 } 203 204 static int set_registers(rtl8150_t * dev, u16 indx, u16 size, void *data) 205 { 206 return usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), 207 RTL8150_REQ_SET_REGS, RTL8150_REQT_WRITE, 208 indx, 0, data, size, 500); 209 } 210 211 static void ctrl_callback(struct urb *urb) 212 { 213 rtl8150_t *dev; 214 int status = urb->status; 215 216 switch (status) { 217 case 0: 218 break; 219 case -EINPROGRESS: 220 break; 221 case -ENOENT: 222 break; 223 default: 224 dev_warn(&urb->dev->dev, "ctrl urb status %d\n", status); 225 } 226 dev = urb->context; 227 clear_bit(RX_REG_SET, &dev->flags); 228 } 229 230 static int async_set_registers(rtl8150_t * dev, u16 indx, u16 size) 231 { 232 int ret; 233 234 if (test_bit(RX_REG_SET, &dev->flags)) 235 return -EAGAIN; 236 237 dev->dr.bRequestType = RTL8150_REQT_WRITE; 238 dev->dr.bRequest = RTL8150_REQ_SET_REGS; 239 dev->dr.wValue = cpu_to_le16(indx); 240 dev->dr.wIndex = 0; 241 dev->dr.wLength = cpu_to_le16(size); 242 dev->ctrl_urb->transfer_buffer_length = size; 243 usb_fill_control_urb(dev->ctrl_urb, dev->udev, 244 usb_sndctrlpipe(dev->udev, 0), (char *) &dev->dr, 245 &dev->rx_creg, size, ctrl_callback, dev); 246 if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC))) { 247 if (ret == -ENODEV) 248 netif_device_detach(dev->netdev); 249 err("control request submission failed: %d", ret); 250 } else 251 set_bit(RX_REG_SET, &dev->flags); 252 253 return ret; 254 } 255 256 static int read_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 * reg) 257 { 258 int i; 259 u8 data[3], tmp; 260 261 data[0] = phy; 262 data[1] = data[2] = 0; 263 tmp = indx | PHY_READ | PHY_GO; 264 i = 0; 265 266 set_registers(dev, PHYADD, sizeof(data), data); 267 set_registers(dev, PHYCNT, 1, &tmp); 268 do { 269 get_registers(dev, PHYCNT, 1, data); 270 } while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT)); 271 272 if (i < MII_TIMEOUT) { 273 get_registers(dev, PHYDAT, 2, data); 274 *reg = data[0] | (data[1] << 8); 275 return 0; 276 } else 277 return 1; 278 } 279 280 static int write_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 reg) 281 { 282 int i; 283 u8 data[3], tmp; 284 285 data[0] = phy; 286 data[1] = reg & 0xff; 287 data[2] = (reg >> 8) & 0xff; 288 tmp = indx | PHY_WRITE | PHY_GO; 289 i = 0; 290 291 set_registers(dev, PHYADD, sizeof(data), data); 292 set_registers(dev, PHYCNT, 1, &tmp); 293 do { 294 get_registers(dev, PHYCNT, 1, data); 295 } while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT)); 296 297 if (i < MII_TIMEOUT) 298 return 0; 299 else 300 return 1; 301 } 302 303 static inline void set_ethernet_addr(rtl8150_t * dev) 304 { 305 u8 node_id[6]; 306 307 get_registers(dev, IDR, sizeof(node_id), node_id); 308 memcpy(dev->netdev->dev_addr, node_id, sizeof(node_id)); 309 } 310 311 static int rtl8150_set_mac_address(struct net_device *netdev, void *p) 312 { 313 struct sockaddr *addr = p; 314 rtl8150_t *dev = netdev_priv(netdev); 315 int i; 316 317 if (netif_running(netdev)) 318 return -EBUSY; 319 320 memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); 321 dbg("%s: Setting MAC address to ", netdev->name); 322 for (i = 0; i < 5; i++) 323 dbg("%02X:", netdev->dev_addr[i]); 324 dbg("%02X\n", netdev->dev_addr[i]); 325 /* Set the IDR registers. */ 326 set_registers(dev, IDR, sizeof(netdev->dev_addr), netdev->dev_addr); 327 #ifdef EEPROM_WRITE 328 { 329 u8 cr; 330 /* Get the CR contents. */ 331 get_registers(dev, CR, 1, &cr); 332 /* Set the WEPROM bit (eeprom write enable). */ 333 cr |= 0x20; 334 set_registers(dev, CR, 1, &cr); 335 /* Write the MAC address into eeprom. Eeprom writes must be word-sized, 336 so we need to split them up. */ 337 for (i = 0; i * 2 < netdev->addr_len; i++) { 338 set_registers(dev, IDR_EEPROM + (i * 2), 2, 339 netdev->dev_addr + (i * 2)); 340 } 341 /* Clear the WEPROM bit (preventing accidental eeprom writes). */ 342 cr &= 0xdf; 343 set_registers(dev, CR, 1, &cr); 344 } 345 #endif 346 return 0; 347 } 348 349 static int rtl8150_reset(rtl8150_t * dev) 350 { 351 u8 data = 0x10; 352 int i = HZ; 353 354 set_registers(dev, CR, 1, &data); 355 do { 356 get_registers(dev, CR, 1, &data); 357 } while ((data & 0x10) && --i); 358 359 return (i > 0) ? 1 : 0; 360 } 361 362 static int alloc_all_urbs(rtl8150_t * dev) 363 { 364 dev->rx_urb = usb_alloc_urb(0, GFP_KERNEL); 365 if (!dev->rx_urb) 366 return 0; 367 dev->tx_urb = usb_alloc_urb(0, GFP_KERNEL); 368 if (!dev->tx_urb) { 369 usb_free_urb(dev->rx_urb); 370 return 0; 371 } 372 dev->intr_urb = usb_alloc_urb(0, GFP_KERNEL); 373 if (!dev->intr_urb) { 374 usb_free_urb(dev->rx_urb); 375 usb_free_urb(dev->tx_urb); 376 return 0; 377 } 378 dev->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL); 379 if (!dev->ctrl_urb) { 380 usb_free_urb(dev->rx_urb); 381 usb_free_urb(dev->tx_urb); 382 usb_free_urb(dev->intr_urb); 383 return 0; 384 } 385 386 return 1; 387 } 388 389 static void free_all_urbs(rtl8150_t * dev) 390 { 391 usb_free_urb(dev->rx_urb); 392 usb_free_urb(dev->tx_urb); 393 usb_free_urb(dev->intr_urb); 394 usb_free_urb(dev->ctrl_urb); 395 } 396 397 static void unlink_all_urbs(rtl8150_t * dev) 398 { 399 usb_kill_urb(dev->rx_urb); 400 usb_kill_urb(dev->tx_urb); 401 usb_kill_urb(dev->intr_urb); 402 usb_kill_urb(dev->ctrl_urb); 403 } 404 405 static inline struct sk_buff *pull_skb(rtl8150_t *dev) 406 { 407 struct sk_buff *skb; 408 int i; 409 410 for (i = 0; i < RX_SKB_POOL_SIZE; i++) { 411 if (dev->rx_skb_pool[i]) { 412 skb = dev->rx_skb_pool[i]; 413 dev->rx_skb_pool[i] = NULL; 414 return skb; 415 } 416 } 417 return NULL; 418 } 419 420 static void read_bulk_callback(struct urb *urb) 421 { 422 rtl8150_t *dev; 423 unsigned pkt_len, res; 424 struct sk_buff *skb; 425 struct net_device *netdev; 426 u16 rx_stat; 427 int status = urb->status; 428 int result; 429 430 dev = urb->context; 431 if (!dev) 432 return; 433 if (test_bit(RTL8150_UNPLUG, &dev->flags)) 434 return; 435 netdev = dev->netdev; 436 if (!netif_device_present(netdev)) 437 return; 438 439 switch (status) { 440 case 0: 441 break; 442 case -ENOENT: 443 return; /* the urb is in unlink state */ 444 case -ETIME: 445 dev_warn(&urb->dev->dev, "may be reset is needed?..\n"); 446 goto goon; 447 default: 448 dev_warn(&urb->dev->dev, "Rx status %d\n", status); 449 goto goon; 450 } 451 452 if (!dev->rx_skb) 453 goto resched; 454 /* protect against short packets (tell me why we got some?!?) */ 455 if (urb->actual_length < 4) 456 goto goon; 457 458 res = urb->actual_length; 459 rx_stat = le16_to_cpu(*(__le16 *)(urb->transfer_buffer + res - 4)); 460 pkt_len = res - 4; 461 462 skb_put(dev->rx_skb, pkt_len); 463 dev->rx_skb->protocol = eth_type_trans(dev->rx_skb, netdev); 464 netif_rx(dev->rx_skb); 465 netdev->stats.rx_packets++; 466 netdev->stats.rx_bytes += pkt_len; 467 468 spin_lock(&dev->rx_pool_lock); 469 skb = pull_skb(dev); 470 spin_unlock(&dev->rx_pool_lock); 471 if (!skb) 472 goto resched; 473 474 dev->rx_skb = skb; 475 goon: 476 usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1), 477 dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev); 478 result = usb_submit_urb(dev->rx_urb, GFP_ATOMIC); 479 if (result == -ENODEV) 480 netif_device_detach(dev->netdev); 481 else if (result) { 482 set_bit(RX_URB_FAIL, &dev->flags); 483 goto resched; 484 } else { 485 clear_bit(RX_URB_FAIL, &dev->flags); 486 } 487 488 return; 489 resched: 490 tasklet_schedule(&dev->tl); 491 } 492 493 static void rx_fixup(unsigned long data) 494 { 495 rtl8150_t *dev; 496 struct sk_buff *skb; 497 int status; 498 499 dev = (rtl8150_t *)data; 500 501 spin_lock_irq(&dev->rx_pool_lock); 502 fill_skb_pool(dev); 503 spin_unlock_irq(&dev->rx_pool_lock); 504 if (test_bit(RX_URB_FAIL, &dev->flags)) 505 if (dev->rx_skb) 506 goto try_again; 507 spin_lock_irq(&dev->rx_pool_lock); 508 skb = pull_skb(dev); 509 spin_unlock_irq(&dev->rx_pool_lock); 510 if (skb == NULL) 511 goto tlsched; 512 dev->rx_skb = skb; 513 usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1), 514 dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev); 515 try_again: 516 status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC); 517 if (status == -ENODEV) { 518 netif_device_detach(dev->netdev); 519 } else if (status) { 520 set_bit(RX_URB_FAIL, &dev->flags); 521 goto tlsched; 522 } else { 523 clear_bit(RX_URB_FAIL, &dev->flags); 524 } 525 526 return; 527 tlsched: 528 tasklet_schedule(&dev->tl); 529 } 530 531 static void write_bulk_callback(struct urb *urb) 532 { 533 rtl8150_t *dev; 534 int status = urb->status; 535 536 dev = urb->context; 537 if (!dev) 538 return; 539 dev_kfree_skb_irq(dev->tx_skb); 540 if (!netif_device_present(dev->netdev)) 541 return; 542 if (status) 543 dev_info(&urb->dev->dev, "%s: Tx status %d\n", 544 dev->netdev->name, status); 545 dev->netdev->trans_start = jiffies; 546 netif_wake_queue(dev->netdev); 547 } 548 549 static void intr_callback(struct urb *urb) 550 { 551 rtl8150_t *dev; 552 __u8 *d; 553 int status = urb->status; 554 int res; 555 556 dev = urb->context; 557 if (!dev) 558 return; 559 switch (status) { 560 case 0: /* success */ 561 break; 562 case -ECONNRESET: /* unlink */ 563 case -ENOENT: 564 case -ESHUTDOWN: 565 return; 566 /* -EPIPE: should clear the halt */ 567 default: 568 dev_info(&urb->dev->dev, "%s: intr status %d\n", 569 dev->netdev->name, status); 570 goto resubmit; 571 } 572 573 d = urb->transfer_buffer; 574 if (d[0] & TSR_ERRORS) { 575 dev->netdev->stats.tx_errors++; 576 if (d[INT_TSR] & (TSR_ECOL | TSR_JBR)) 577 dev->netdev->stats.tx_aborted_errors++; 578 if (d[INT_TSR] & TSR_LCOL) 579 dev->netdev->stats.tx_window_errors++; 580 if (d[INT_TSR] & TSR_LOSS_CRS) 581 dev->netdev->stats.tx_carrier_errors++; 582 } 583 /* Report link status changes to the network stack */ 584 if ((d[INT_MSR] & MSR_LINK) == 0) { 585 if (netif_carrier_ok(dev->netdev)) { 586 netif_carrier_off(dev->netdev); 587 dbg("%s: LINK LOST\n", __func__); 588 } 589 } else { 590 if (!netif_carrier_ok(dev->netdev)) { 591 netif_carrier_on(dev->netdev); 592 dbg("%s: LINK CAME BACK\n", __func__); 593 } 594 } 595 596 resubmit: 597 res = usb_submit_urb (urb, GFP_ATOMIC); 598 if (res == -ENODEV) 599 netif_device_detach(dev->netdev); 600 else if (res) 601 err ("can't resubmit intr, %s-%s/input0, status %d", 602 dev->udev->bus->bus_name, 603 dev->udev->devpath, res); 604 } 605 606 static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message) 607 { 608 rtl8150_t *dev = usb_get_intfdata(intf); 609 610 netif_device_detach(dev->netdev); 611 612 if (netif_running(dev->netdev)) { 613 usb_kill_urb(dev->rx_urb); 614 usb_kill_urb(dev->intr_urb); 615 } 616 return 0; 617 } 618 619 static int rtl8150_resume(struct usb_interface *intf) 620 { 621 rtl8150_t *dev = usb_get_intfdata(intf); 622 623 netif_device_attach(dev->netdev); 624 if (netif_running(dev->netdev)) { 625 dev->rx_urb->status = 0; 626 dev->rx_urb->actual_length = 0; 627 read_bulk_callback(dev->rx_urb); 628 629 dev->intr_urb->status = 0; 630 dev->intr_urb->actual_length = 0; 631 intr_callback(dev->intr_urb); 632 } 633 return 0; 634 } 635 636 /* 637 ** 638 ** network related part of the code 639 ** 640 */ 641 642 static void fill_skb_pool(rtl8150_t *dev) 643 { 644 struct sk_buff *skb; 645 int i; 646 647 for (i = 0; i < RX_SKB_POOL_SIZE; i++) { 648 if (dev->rx_skb_pool[i]) 649 continue; 650 skb = dev_alloc_skb(RTL8150_MTU + 2); 651 if (!skb) { 652 return; 653 } 654 skb_reserve(skb, 2); 655 dev->rx_skb_pool[i] = skb; 656 } 657 } 658 659 static void free_skb_pool(rtl8150_t *dev) 660 { 661 int i; 662 663 for (i = 0; i < RX_SKB_POOL_SIZE; i++) 664 if (dev->rx_skb_pool[i]) 665 dev_kfree_skb(dev->rx_skb_pool[i]); 666 } 667 668 static int enable_net_traffic(rtl8150_t * dev) 669 { 670 u8 cr, tcr, rcr, msr; 671 672 if (!rtl8150_reset(dev)) { 673 dev_warn(&dev->udev->dev, "device reset failed\n"); 674 } 675 /* RCR bit7=1 attach Rx info at the end; =0 HW CRC (which is broken) */ 676 rcr = 0x9e; 677 dev->rx_creg = cpu_to_le16(rcr); 678 tcr = 0xd8; 679 cr = 0x0c; 680 if (!(rcr & 0x80)) 681 set_bit(RTL8150_HW_CRC, &dev->flags); 682 set_registers(dev, RCR, 1, &rcr); 683 set_registers(dev, TCR, 1, &tcr); 684 set_registers(dev, CR, 1, &cr); 685 get_registers(dev, MSR, 1, &msr); 686 687 return 0; 688 } 689 690 static void disable_net_traffic(rtl8150_t * dev) 691 { 692 u8 cr; 693 694 get_registers(dev, CR, 1, &cr); 695 cr &= 0xf3; 696 set_registers(dev, CR, 1, &cr); 697 } 698 699 static void rtl8150_tx_timeout(struct net_device *netdev) 700 { 701 rtl8150_t *dev = netdev_priv(netdev); 702 dev_warn(&netdev->dev, "Tx timeout.\n"); 703 usb_unlink_urb(dev->tx_urb); 704 netdev->stats.tx_errors++; 705 } 706 707 static void rtl8150_set_multicast(struct net_device *netdev) 708 { 709 rtl8150_t *dev = netdev_priv(netdev); 710 netif_stop_queue(netdev); 711 if (netdev->flags & IFF_PROMISC) { 712 dev->rx_creg |= cpu_to_le16(0x0001); 713 dev_info(&netdev->dev, "%s: promiscuous mode\n", netdev->name); 714 } else if (netdev->mc_count || 715 (netdev->flags & IFF_ALLMULTI)) { 716 dev->rx_creg &= cpu_to_le16(0xfffe); 717 dev->rx_creg |= cpu_to_le16(0x0002); 718 dev_info(&netdev->dev, "%s: allmulti set\n", netdev->name); 719 } else { 720 /* ~RX_MULTICAST, ~RX_PROMISCUOUS */ 721 dev->rx_creg &= cpu_to_le16(0x00fc); 722 } 723 async_set_registers(dev, RCR, 2); 724 netif_wake_queue(netdev); 725 } 726 727 static int rtl8150_start_xmit(struct sk_buff *skb, struct net_device *netdev) 728 { 729 rtl8150_t *dev = netdev_priv(netdev); 730 int count, res; 731 732 netif_stop_queue(netdev); 733 count = (skb->len < 60) ? 60 : skb->len; 734 count = (count & 0x3f) ? count : count + 1; 735 dev->tx_skb = skb; 736 usb_fill_bulk_urb(dev->tx_urb, dev->udev, usb_sndbulkpipe(dev->udev, 2), 737 skb->data, count, write_bulk_callback, dev); 738 if ((res = usb_submit_urb(dev->tx_urb, GFP_ATOMIC))) { 739 /* Can we get/handle EPIPE here? */ 740 if (res == -ENODEV) 741 netif_device_detach(dev->netdev); 742 else { 743 dev_warn(&netdev->dev, "failed tx_urb %d\n", res); 744 netdev->stats.tx_errors++; 745 netif_start_queue(netdev); 746 } 747 } else { 748 netdev->stats.tx_packets++; 749 netdev->stats.tx_bytes += skb->len; 750 netdev->trans_start = jiffies; 751 } 752 753 return 0; 754 } 755 756 757 static void set_carrier(struct net_device *netdev) 758 { 759 rtl8150_t *dev = netdev_priv(netdev); 760 short tmp; 761 762 get_registers(dev, CSCR, 2, &tmp); 763 if (tmp & CSCR_LINK_STATUS) 764 netif_carrier_on(netdev); 765 else 766 netif_carrier_off(netdev); 767 } 768 769 static int rtl8150_open(struct net_device *netdev) 770 { 771 rtl8150_t *dev = netdev_priv(netdev); 772 int res; 773 774 if (dev->rx_skb == NULL) 775 dev->rx_skb = pull_skb(dev); 776 if (!dev->rx_skb) 777 return -ENOMEM; 778 779 set_registers(dev, IDR, 6, netdev->dev_addr); 780 781 usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1), 782 dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev); 783 if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL))) { 784 if (res == -ENODEV) 785 netif_device_detach(dev->netdev); 786 dev_warn(&netdev->dev, "rx_urb submit failed: %d\n", res); 787 return res; 788 } 789 usb_fill_int_urb(dev->intr_urb, dev->udev, usb_rcvintpipe(dev->udev, 3), 790 dev->intr_buff, INTBUFSIZE, intr_callback, 791 dev, dev->intr_interval); 792 if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL))) { 793 if (res == -ENODEV) 794 netif_device_detach(dev->netdev); 795 dev_warn(&netdev->dev, "intr_urb submit failed: %d\n", res); 796 usb_kill_urb(dev->rx_urb); 797 return res; 798 } 799 enable_net_traffic(dev); 800 set_carrier(netdev); 801 netif_start_queue(netdev); 802 803 return res; 804 } 805 806 static int rtl8150_close(struct net_device *netdev) 807 { 808 rtl8150_t *dev = netdev_priv(netdev); 809 int res = 0; 810 811 netif_stop_queue(netdev); 812 if (!test_bit(RTL8150_UNPLUG, &dev->flags)) 813 disable_net_traffic(dev); 814 unlink_all_urbs(dev); 815 816 return res; 817 } 818 819 static void rtl8150_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info) 820 { 821 rtl8150_t *dev = netdev_priv(netdev); 822 823 strncpy(info->driver, driver_name, ETHTOOL_BUSINFO_LEN); 824 strncpy(info->version, DRIVER_VERSION, ETHTOOL_BUSINFO_LEN); 825 usb_make_path(dev->udev, info->bus_info, sizeof info->bus_info); 826 } 827 828 static int rtl8150_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) 829 { 830 rtl8150_t *dev = netdev_priv(netdev); 831 short lpa, bmcr; 832 833 ecmd->supported = (SUPPORTED_10baseT_Half | 834 SUPPORTED_10baseT_Full | 835 SUPPORTED_100baseT_Half | 836 SUPPORTED_100baseT_Full | 837 SUPPORTED_Autoneg | 838 SUPPORTED_TP | SUPPORTED_MII); 839 ecmd->port = PORT_TP; 840 ecmd->transceiver = XCVR_INTERNAL; 841 ecmd->phy_address = dev->phy; 842 get_registers(dev, BMCR, 2, &bmcr); 843 get_registers(dev, ANLP, 2, &lpa); 844 if (bmcr & BMCR_ANENABLE) { 845 ecmd->autoneg = AUTONEG_ENABLE; 846 ecmd->speed = (lpa & (LPA_100HALF | LPA_100FULL)) ? 847 SPEED_100 : SPEED_10; 848 if (ecmd->speed == SPEED_100) 849 ecmd->duplex = (lpa & LPA_100FULL) ? 850 DUPLEX_FULL : DUPLEX_HALF; 851 else 852 ecmd->duplex = (lpa & LPA_10FULL) ? 853 DUPLEX_FULL : DUPLEX_HALF; 854 } else { 855 ecmd->autoneg = AUTONEG_DISABLE; 856 ecmd->speed = (bmcr & BMCR_SPEED100) ? 857 SPEED_100 : SPEED_10; 858 ecmd->duplex = (bmcr & BMCR_FULLDPLX) ? 859 DUPLEX_FULL : DUPLEX_HALF; 860 } 861 return 0; 862 } 863 864 static struct ethtool_ops ops = { 865 .get_drvinfo = rtl8150_get_drvinfo, 866 .get_settings = rtl8150_get_settings, 867 .get_link = ethtool_op_get_link 868 }; 869 870 static int rtl8150_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) 871 { 872 rtl8150_t *dev = netdev_priv(netdev); 873 u16 *data = (u16 *) & rq->ifr_ifru; 874 int res = 0; 875 876 switch (cmd) { 877 case SIOCDEVPRIVATE: 878 data[0] = dev->phy; 879 case SIOCDEVPRIVATE + 1: 880 read_mii_word(dev, dev->phy, (data[1] & 0x1f), &data[3]); 881 break; 882 case SIOCDEVPRIVATE + 2: 883 if (!capable(CAP_NET_ADMIN)) 884 return -EPERM; 885 write_mii_word(dev, dev->phy, (data[1] & 0x1f), data[2]); 886 break; 887 default: 888 res = -EOPNOTSUPP; 889 } 890 891 return res; 892 } 893 894 static const struct net_device_ops rtl8150_netdev_ops = { 895 .ndo_open = rtl8150_open, 896 .ndo_stop = rtl8150_close, 897 .ndo_do_ioctl = rtl8150_ioctl, 898 .ndo_start_xmit = rtl8150_start_xmit, 899 .ndo_tx_timeout = rtl8150_tx_timeout, 900 .ndo_set_multicast_list = rtl8150_set_multicast, 901 .ndo_set_mac_address = rtl8150_set_mac_address, 902 903 .ndo_change_mtu = eth_change_mtu, 904 .ndo_validate_addr = eth_validate_addr, 905 }; 906 907 static int rtl8150_probe(struct usb_interface *intf, 908 const struct usb_device_id *id) 909 { 910 struct usb_device *udev = interface_to_usbdev(intf); 911 rtl8150_t *dev; 912 struct net_device *netdev; 913 914 netdev = alloc_etherdev(sizeof(rtl8150_t)); 915 if (!netdev) { 916 err("Out of memory"); 917 return -ENOMEM; 918 } 919 920 dev = netdev_priv(netdev); 921 922 dev->intr_buff = kmalloc(INTBUFSIZE, GFP_KERNEL); 923 if (!dev->intr_buff) { 924 free_netdev(netdev); 925 return -ENOMEM; 926 } 927 928 tasklet_init(&dev->tl, rx_fixup, (unsigned long)dev); 929 spin_lock_init(&dev->rx_pool_lock); 930 931 dev->udev = udev; 932 dev->netdev = netdev; 933 netdev->netdev_ops = &rtl8150_netdev_ops; 934 netdev->watchdog_timeo = RTL8150_TX_TIMEOUT; 935 SET_ETHTOOL_OPS(netdev, &ops); 936 dev->intr_interval = 100; /* 100ms */ 937 938 if (!alloc_all_urbs(dev)) { 939 err("out of memory"); 940 goto out; 941 } 942 if (!rtl8150_reset(dev)) { 943 err("couldn't reset the device"); 944 goto out1; 945 } 946 fill_skb_pool(dev); 947 set_ethernet_addr(dev); 948 949 usb_set_intfdata(intf, dev); 950 SET_NETDEV_DEV(netdev, &intf->dev); 951 if (register_netdev(netdev) != 0) { 952 err("couldn't register the device"); 953 goto out2; 954 } 955 956 dev_info(&intf->dev, "%s: rtl8150 is detected\n", netdev->name); 957 958 return 0; 959 960 out2: 961 usb_set_intfdata(intf, NULL); 962 free_skb_pool(dev); 963 out1: 964 free_all_urbs(dev); 965 out: 966 kfree(dev->intr_buff); 967 free_netdev(netdev); 968 return -EIO; 969 } 970 971 static void rtl8150_disconnect(struct usb_interface *intf) 972 { 973 rtl8150_t *dev = usb_get_intfdata(intf); 974 975 usb_set_intfdata(intf, NULL); 976 if (dev) { 977 set_bit(RTL8150_UNPLUG, &dev->flags); 978 tasklet_disable(&dev->tl); 979 tasklet_kill(&dev->tl); 980 unregister_netdev(dev->netdev); 981 unlink_all_urbs(dev); 982 free_all_urbs(dev); 983 free_skb_pool(dev); 984 if (dev->rx_skb) 985 dev_kfree_skb(dev->rx_skb); 986 kfree(dev->intr_buff); 987 free_netdev(dev->netdev); 988 } 989 } 990 991 static int __init usb_rtl8150_init(void) 992 { 993 printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" 994 DRIVER_DESC "\n"); 995 return usb_register(&rtl8150_driver); 996 } 997 998 static void __exit usb_rtl8150_exit(void) 999 { 1000 usb_deregister(&rtl8150_driver); 1001 } 1002 1003 module_init(usb_rtl8150_init); 1004 module_exit(usb_rtl8150_exit); 1005 1006 MODULE_AUTHOR(DRIVER_AUTHOR); 1007 MODULE_DESCRIPTION(DRIVER_DESC); 1008 MODULE_LICENSE("GPL"); 1009