xref: /openbmc/linux/drivers/net/usb/r8153_ecm.c (revision 85250a24)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 #include <linux/module.h>
3 #include <linux/netdevice.h>
4 #include <linux/mii.h>
5 #include <linux/usb.h>
6 #include <linux/usb/cdc.h>
7 #include <linux/usb/usbnet.h>
8 #include <linux/usb/r8152.h>
9 
10 #define OCP_BASE		0xe86c
11 
12 static int pla_read_word(struct usbnet *dev, u16 index)
13 {
14 	u16 byen = BYTE_EN_WORD;
15 	u8 shift = index & 2;
16 	__le32 tmp;
17 	int ret;
18 
19 	if (shift)
20 		byen <<= shift;
21 
22 	index &= ~3;
23 
24 	ret = usbnet_read_cmd(dev, RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, index,
25 			      MCU_TYPE_PLA | byen, &tmp, sizeof(tmp));
26 	if (ret < 0)
27 		goto out;
28 
29 	ret = __le32_to_cpu(tmp);
30 	ret >>= (shift * 8);
31 	ret &= 0xffff;
32 
33 out:
34 	return ret;
35 }
36 
37 static int pla_write_word(struct usbnet *dev, u16 index, u32 data)
38 {
39 	u32 mask = 0xffff;
40 	u16 byen = BYTE_EN_WORD;
41 	u8 shift = index & 2;
42 	__le32 tmp;
43 	int ret;
44 
45 	data &= mask;
46 
47 	if (shift) {
48 		byen <<= shift;
49 		mask <<= (shift * 8);
50 		data <<= (shift * 8);
51 	}
52 
53 	index &= ~3;
54 
55 	ret = usbnet_read_cmd(dev, RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, index,
56 			      MCU_TYPE_PLA | byen, &tmp, sizeof(tmp));
57 
58 	if (ret < 0)
59 		goto out;
60 
61 	data |= __le32_to_cpu(tmp) & ~mask;
62 	tmp = __cpu_to_le32(data);
63 
64 	ret = usbnet_write_cmd(dev, RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE, index,
65 			       MCU_TYPE_PLA | byen, &tmp, sizeof(tmp));
66 
67 out:
68 	return ret;
69 }
70 
71 static int r8153_ecm_mdio_read(struct net_device *netdev, int phy_id, int reg)
72 {
73 	struct usbnet *dev = netdev_priv(netdev);
74 	int ret;
75 
76 	ret = pla_write_word(dev, OCP_BASE, 0xa000);
77 	if (ret < 0)
78 		goto out;
79 
80 	ret = pla_read_word(dev, 0xb400 + reg * 2);
81 
82 out:
83 	return ret;
84 }
85 
86 static void r8153_ecm_mdio_write(struct net_device *netdev, int phy_id, int reg, int val)
87 {
88 	struct usbnet *dev = netdev_priv(netdev);
89 	int ret;
90 
91 	ret = pla_write_word(dev, OCP_BASE, 0xa000);
92 	if (ret < 0)
93 		return;
94 
95 	ret = pla_write_word(dev, 0xb400 + reg * 2, val);
96 }
97 
98 static int r8153_bind(struct usbnet *dev, struct usb_interface *intf)
99 {
100 	int status;
101 
102 	status = usbnet_cdc_bind(dev, intf);
103 	if (status < 0)
104 		return status;
105 
106 	dev->mii.dev = dev->net;
107 	dev->mii.mdio_read = r8153_ecm_mdio_read;
108 	dev->mii.mdio_write = r8153_ecm_mdio_write;
109 	dev->mii.reg_num_mask = 0x1f;
110 	dev->mii.supports_gmii = 1;
111 
112 	return status;
113 }
114 
115 static const struct driver_info r8153_info = {
116 	.description =	"RTL8153 ECM Device",
117 	.flags =	FLAG_ETHER,
118 	.bind =		r8153_bind,
119 	.unbind =	usbnet_cdc_unbind,
120 	.status =	usbnet_cdc_status,
121 	.manage_power =	usbnet_manage_power,
122 };
123 
124 static const struct usb_device_id products[] = {
125 /* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */
126 {
127 	USB_DEVICE_AND_INTERFACE_INFO(VENDOR_ID_REALTEK, 0x8153, USB_CLASS_COMM,
128 				      USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
129 	.driver_info = (unsigned long)&r8153_info,
130 },
131 
132 /* Lenovo Powered USB-C Travel Hub (4X90S92381, based on Realtek RTL8153) */
133 {
134 	USB_DEVICE_AND_INTERFACE_INFO(VENDOR_ID_LENOVO, 0x721e, USB_CLASS_COMM,
135 				      USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
136 	.driver_info = (unsigned long)&r8153_info,
137 },
138 
139 	{ },		/* END */
140 };
141 MODULE_DEVICE_TABLE(usb, products);
142 
143 static int rtl8153_ecm_probe(struct usb_interface *intf,
144 			     const struct usb_device_id *id)
145 {
146 #if IS_REACHABLE(CONFIG_USB_RTL8152)
147 	if (rtl8152_get_version(intf))
148 		return -ENODEV;
149 #endif
150 
151 	return usbnet_probe(intf, id);
152 }
153 
154 static struct usb_driver r8153_ecm_driver = {
155 	.name =		"r8153_ecm",
156 	.id_table =	products,
157 	.probe =	rtl8153_ecm_probe,
158 	.disconnect =	usbnet_disconnect,
159 	.suspend =	usbnet_suspend,
160 	.resume =	usbnet_resume,
161 	.reset_resume =	usbnet_resume,
162 	.supports_autosuspend = 1,
163 	.disable_hub_initiated_lpm = 1,
164 };
165 
166 module_usb_driver(r8153_ecm_driver);
167 
168 MODULE_AUTHOR("Hayes Wang");
169 MODULE_DESCRIPTION("Realtek USB ECM device");
170 MODULE_LICENSE("GPL");
171