xref: /openbmc/linux/drivers/net/usb/hso.c (revision 4dc7ccf7)
1 /******************************************************************************
2  *
3  * Driver for Option High Speed Mobile Devices.
4  *
5  *  Copyright (C) 2008 Option International
6  *                     Filip Aben <f.aben@option.com>
7  *                     Denis Joseph Barrow <d.barow@option.com>
8  *                     Jan Dumon <j.dumon@option.com>
9  *  Copyright (C) 2007 Andrew Bird (Sphere Systems Ltd)
10  *  			<ajb@spheresystems.co.uk>
11  *  Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
12  *  Copyright (C) 2008 Novell, Inc.
13  *
14  *  This program is free software; you can redistribute it and/or modify
15  *  it under the terms of the GNU General Public License version 2 as
16  *  published by the Free Software Foundation.
17  *
18  *  This program is distributed in the hope that it will be useful,
19  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
20  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21  *  GNU General Public License for more details.
22  *
23  *  You should have received a copy of the GNU General Public License
24  *  along with this program; if not, write to the Free Software
25  *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
26  *  USA
27  *
28  *
29  *****************************************************************************/
30 
31 /******************************************************************************
32  *
33  * Description of the device:
34  *
35  * Interface 0:	Contains the IP network interface on the bulk end points.
36  *		The multiplexed serial ports are using the interrupt and
37  *		control endpoints.
38  *		Interrupt contains a bitmap telling which multiplexed
39  *		serialport needs servicing.
40  *
41  * Interface 1:	Diagnostics port, uses bulk only, do not submit urbs until the
42  *		port is opened, as this have a huge impact on the network port
43  *		throughput.
44  *
45  * Interface 2:	Standard modem interface - circuit switched interface, this
46  *		can be used to make a standard ppp connection however it
47  *              should not be used in conjunction with the IP network interface
48  *              enabled for USB performance reasons i.e. if using this set
49  *              ideally disable_net=1.
50  *
51  *****************************************************************************/
52 
53 #include <linux/sched.h>
54 #include <linux/slab.h>
55 #include <linux/init.h>
56 #include <linux/delay.h>
57 #include <linux/netdevice.h>
58 #include <linux/module.h>
59 #include <linux/ethtool.h>
60 #include <linux/usb.h>
61 #include <linux/timer.h>
62 #include <linux/tty.h>
63 #include <linux/tty_driver.h>
64 #include <linux/tty_flip.h>
65 #include <linux/kmod.h>
66 #include <linux/rfkill.h>
67 #include <linux/ip.h>
68 #include <linux/uaccess.h>
69 #include <linux/usb/cdc.h>
70 #include <net/arp.h>
71 #include <asm/byteorder.h>
72 #include <linux/serial_core.h>
73 #include <linux/serial.h>
74 
75 
76 #define DRIVER_VERSION			"1.2"
77 #define MOD_AUTHOR			"Option Wireless"
78 #define MOD_DESCRIPTION			"USB High Speed Option driver"
79 #define MOD_LICENSE			"GPL"
80 
81 #define HSO_MAX_NET_DEVICES		10
82 #define HSO__MAX_MTU			2048
83 #define DEFAULT_MTU			1500
84 #define DEFAULT_MRU			1500
85 
86 #define CTRL_URB_RX_SIZE		1024
87 #define CTRL_URB_TX_SIZE		64
88 
89 #define BULK_URB_RX_SIZE		4096
90 #define BULK_URB_TX_SIZE		8192
91 
92 #define MUX_BULK_RX_BUF_SIZE		HSO__MAX_MTU
93 #define MUX_BULK_TX_BUF_SIZE		HSO__MAX_MTU
94 #define MUX_BULK_RX_BUF_COUNT		4
95 #define USB_TYPE_OPTION_VENDOR		0x20
96 
97 /* These definitions are used with the struct hso_net flags element */
98 /* - use *_bit operations on it. (bit indices not values.) */
99 #define HSO_NET_RUNNING			0
100 
101 #define	HSO_NET_TX_TIMEOUT		(HZ*10)
102 
103 #define HSO_SERIAL_MAGIC		0x48534f31
104 
105 /* Number of ttys to handle */
106 #define HSO_SERIAL_TTY_MINORS		256
107 
108 #define MAX_RX_URBS			2
109 
110 static inline struct hso_serial *get_serial_by_tty(struct tty_struct *tty)
111 {
112 	if (tty)
113 		return tty->driver_data;
114 	return NULL;
115 }
116 
117 /*****************************************************************************/
118 /* Debugging functions                                                       */
119 /*****************************************************************************/
120 #define D__(lvl_, fmt, arg...)				\
121 	do {						\
122 		printk(lvl_ "[%d:%s]: " fmt "\n",	\
123 		       __LINE__, __func__, ## arg);	\
124 	} while (0)
125 
126 #define D_(lvl, args...)				\
127 	do {						\
128 		if (lvl & debug)			\
129 			D__(KERN_INFO, args);		\
130 	} while (0)
131 
132 #define D1(args...)	D_(0x01, ##args)
133 #define D2(args...)	D_(0x02, ##args)
134 #define D3(args...)	D_(0x04, ##args)
135 #define D4(args...)	D_(0x08, ##args)
136 #define D5(args...)	D_(0x10, ##args)
137 
138 /*****************************************************************************/
139 /* Enumerators                                                               */
140 /*****************************************************************************/
141 enum pkt_parse_state {
142 	WAIT_IP,
143 	WAIT_DATA,
144 	WAIT_SYNC
145 };
146 
147 /*****************************************************************************/
148 /* Structs                                                                   */
149 /*****************************************************************************/
150 
151 struct hso_shared_int {
152 	struct usb_endpoint_descriptor *intr_endp;
153 	void *shared_intr_buf;
154 	struct urb *shared_intr_urb;
155 	struct usb_device *usb;
156 	int use_count;
157 	int ref_count;
158 	struct mutex shared_int_lock;
159 };
160 
161 struct hso_net {
162 	struct hso_device *parent;
163 	struct net_device *net;
164 	struct rfkill *rfkill;
165 
166 	struct usb_endpoint_descriptor *in_endp;
167 	struct usb_endpoint_descriptor *out_endp;
168 
169 	struct urb *mux_bulk_rx_urb_pool[MUX_BULK_RX_BUF_COUNT];
170 	struct urb *mux_bulk_tx_urb;
171 	void *mux_bulk_rx_buf_pool[MUX_BULK_RX_BUF_COUNT];
172 	void *mux_bulk_tx_buf;
173 
174 	struct sk_buff *skb_rx_buf;
175 	struct sk_buff *skb_tx_buf;
176 
177 	enum pkt_parse_state rx_parse_state;
178 	spinlock_t net_lock;
179 
180 	unsigned short rx_buf_size;
181 	unsigned short rx_buf_missing;
182 	struct iphdr rx_ip_hdr;
183 
184 	unsigned long flags;
185 };
186 
187 enum rx_ctrl_state{
188 	RX_IDLE,
189 	RX_SENT,
190 	RX_PENDING
191 };
192 
193 #define BM_REQUEST_TYPE (0xa1)
194 #define B_NOTIFICATION  (0x20)
195 #define W_VALUE         (0x0)
196 #define W_INDEX         (0x2)
197 #define W_LENGTH        (0x2)
198 
199 #define B_OVERRUN       (0x1<<6)
200 #define B_PARITY        (0x1<<5)
201 #define B_FRAMING       (0x1<<4)
202 #define B_RING_SIGNAL   (0x1<<3)
203 #define B_BREAK         (0x1<<2)
204 #define B_TX_CARRIER    (0x1<<1)
205 #define B_RX_CARRIER    (0x1<<0)
206 
207 struct hso_serial_state_notification {
208 	u8 bmRequestType;
209 	u8 bNotification;
210 	u16 wValue;
211 	u16 wIndex;
212 	u16 wLength;
213 	u16 UART_state_bitmap;
214 } __attribute__((packed));
215 
216 struct hso_tiocmget {
217 	struct mutex mutex;
218 	wait_queue_head_t waitq;
219 	int    intr_completed;
220 	struct usb_endpoint_descriptor *endp;
221 	struct urb *urb;
222 	struct hso_serial_state_notification serial_state_notification;
223 	u16    prev_UART_state_bitmap;
224 	struct uart_icount icount;
225 };
226 
227 
228 struct hso_serial {
229 	struct hso_device *parent;
230 	int magic;
231 	u8 minor;
232 
233 	struct hso_shared_int *shared_int;
234 
235 	/* rx/tx urb could be either a bulk urb or a control urb depending
236 	   on which serial port it is used on. */
237 	struct urb *rx_urb[MAX_RX_URBS];
238 	u8 num_rx_urbs;
239 	u8 *rx_data[MAX_RX_URBS];
240 	u16 rx_data_length;	/* should contain allocated length */
241 
242 	struct urb *tx_urb;
243 	u8 *tx_data;
244 	u8 *tx_buffer;
245 	u16 tx_data_length;	/* should contain allocated length */
246 	u16 tx_data_count;
247 	u16 tx_buffer_count;
248 	struct usb_ctrlrequest ctrl_req_tx;
249 	struct usb_ctrlrequest ctrl_req_rx;
250 
251 	struct usb_endpoint_descriptor *in_endp;
252 	struct usb_endpoint_descriptor *out_endp;
253 
254 	enum rx_ctrl_state rx_state;
255 	u8 rts_state;
256 	u8 dtr_state;
257 	unsigned tx_urb_used:1;
258 
259 	/* from usb_serial_port */
260 	struct tty_struct *tty;
261 	int open_count;
262 	spinlock_t serial_lock;
263 
264 	int (*write_data) (struct hso_serial *serial);
265 	struct hso_tiocmget  *tiocmget;
266 	/* Hacks required to get flow control
267 	 * working on the serial receive buffers
268 	 * so as not to drop characters on the floor.
269 	 */
270 	int  curr_rx_urb_idx;
271 	u16  curr_rx_urb_offset;
272 	u8   rx_urb_filled[MAX_RX_URBS];
273 	struct tasklet_struct unthrottle_tasklet;
274 	struct work_struct    retry_unthrottle_workqueue;
275 };
276 
277 struct hso_device {
278 	union {
279 		struct hso_serial *dev_serial;
280 		struct hso_net *dev_net;
281 	} port_data;
282 
283 	u32 port_spec;
284 
285 	u8 is_active;
286 	u8 usb_gone;
287 	struct work_struct async_get_intf;
288 	struct work_struct async_put_intf;
289 	struct work_struct reset_device;
290 
291 	struct usb_device *usb;
292 	struct usb_interface *interface;
293 
294 	struct device *dev;
295 	struct kref ref;
296 	struct mutex mutex;
297 };
298 
299 /* Type of interface */
300 #define HSO_INTF_MASK		0xFF00
301 #define	HSO_INTF_MUX		0x0100
302 #define	HSO_INTF_BULK   	0x0200
303 
304 /* Type of port */
305 #define HSO_PORT_MASK		0xFF
306 #define HSO_PORT_NO_PORT	0x0
307 #define	HSO_PORT_CONTROL	0x1
308 #define	HSO_PORT_APP		0x2
309 #define	HSO_PORT_GPS		0x3
310 #define	HSO_PORT_PCSC		0x4
311 #define	HSO_PORT_APP2		0x5
312 #define HSO_PORT_GPS_CONTROL	0x6
313 #define HSO_PORT_MSD		0x7
314 #define HSO_PORT_VOICE		0x8
315 #define HSO_PORT_DIAG2		0x9
316 #define	HSO_PORT_DIAG		0x10
317 #define	HSO_PORT_MODEM		0x11
318 #define	HSO_PORT_NETWORK	0x12
319 
320 /* Additional device info */
321 #define HSO_INFO_MASK		0xFF000000
322 #define HSO_INFO_CRC_BUG	0x01000000
323 
324 /*****************************************************************************/
325 /* Prototypes                                                                */
326 /*****************************************************************************/
327 /* Serial driver functions */
328 static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file,
329 			       unsigned int set, unsigned int clear);
330 static void ctrl_callback(struct urb *urb);
331 static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial);
332 static void hso_kick_transmit(struct hso_serial *serial);
333 /* Helper functions */
334 static int hso_mux_submit_intr_urb(struct hso_shared_int *mux_int,
335 				   struct usb_device *usb, gfp_t gfp);
336 static void handle_usb_error(int status, const char *function,
337 			     struct hso_device *hso_dev);
338 static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
339 						  int type, int dir);
340 static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports);
341 static void hso_free_interface(struct usb_interface *intf);
342 static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags);
343 static int hso_stop_serial_device(struct hso_device *hso_dev);
344 static int hso_start_net_device(struct hso_device *hso_dev);
345 static void hso_free_shared_int(struct hso_shared_int *shared_int);
346 static int hso_stop_net_device(struct hso_device *hso_dev);
347 static void hso_serial_ref_free(struct kref *ref);
348 static void hso_std_serial_read_bulk_callback(struct urb *urb);
349 static int hso_mux_serial_read(struct hso_serial *serial);
350 static void async_get_intf(struct work_struct *data);
351 static void async_put_intf(struct work_struct *data);
352 static int hso_put_activity(struct hso_device *hso_dev);
353 static int hso_get_activity(struct hso_device *hso_dev);
354 static void tiocmget_intr_callback(struct urb *urb);
355 static void reset_device(struct work_struct *data);
356 /*****************************************************************************/
357 /* Helping functions                                                         */
358 /*****************************************************************************/
359 
360 /* #define DEBUG */
361 
362 static inline struct hso_net *dev2net(struct hso_device *hso_dev)
363 {
364 	return hso_dev->port_data.dev_net;
365 }
366 
367 static inline struct hso_serial *dev2ser(struct hso_device *hso_dev)
368 {
369 	return hso_dev->port_data.dev_serial;
370 }
371 
372 /* Debugging functions */
373 #ifdef DEBUG
374 static void dbg_dump(int line_count, const char *func_name, unsigned char *buf,
375 		     unsigned int len)
376 {
377 	static char name[255];
378 
379 	sprintf(name, "hso[%d:%s]", line_count, func_name);
380 	print_hex_dump_bytes(name, DUMP_PREFIX_NONE, buf, len);
381 }
382 
383 #define DUMP(buf_, len_)	\
384 	dbg_dump(__LINE__, __func__, (unsigned char *)buf_, len_)
385 
386 #define DUMP1(buf_, len_)			\
387 	do {					\
388 		if (0x01 & debug)		\
389 			DUMP(buf_, len_);	\
390 	} while (0)
391 #else
392 #define DUMP(buf_, len_)
393 #define DUMP1(buf_, len_)
394 #endif
395 
396 /* module parameters */
397 static int debug;
398 static int tty_major;
399 static int disable_net;
400 
401 /* driver info */
402 static const char driver_name[] = "hso";
403 static const char tty_filename[] = "ttyHS";
404 static const char *version = __FILE__ ": " DRIVER_VERSION " " MOD_AUTHOR;
405 /* the usb driver itself (registered in hso_init) */
406 static struct usb_driver hso_driver;
407 /* serial structures */
408 static struct tty_driver *tty_drv;
409 static struct hso_device *serial_table[HSO_SERIAL_TTY_MINORS];
410 static struct hso_device *network_table[HSO_MAX_NET_DEVICES];
411 static spinlock_t serial_table_lock;
412 
413 static const s32 default_port_spec[] = {
414 	HSO_INTF_MUX | HSO_PORT_NETWORK,
415 	HSO_INTF_BULK | HSO_PORT_DIAG,
416 	HSO_INTF_BULK | HSO_PORT_MODEM,
417 	0
418 };
419 
420 static const s32 icon321_port_spec[] = {
421 	HSO_INTF_MUX | HSO_PORT_NETWORK,
422 	HSO_INTF_BULK | HSO_PORT_DIAG2,
423 	HSO_INTF_BULK | HSO_PORT_MODEM,
424 	HSO_INTF_BULK | HSO_PORT_DIAG,
425 	0
426 };
427 
428 #define default_port_device(vendor, product)	\
429 	USB_DEVICE(vendor, product),	\
430 		.driver_info = (kernel_ulong_t)default_port_spec
431 
432 #define icon321_port_device(vendor, product)	\
433 	USB_DEVICE(vendor, product),	\
434 		.driver_info = (kernel_ulong_t)icon321_port_spec
435 
436 /* list of devices we support */
437 static const struct usb_device_id hso_ids[] = {
438 	{default_port_device(0x0af0, 0x6711)},
439 	{default_port_device(0x0af0, 0x6731)},
440 	{default_port_device(0x0af0, 0x6751)},
441 	{default_port_device(0x0af0, 0x6771)},
442 	{default_port_device(0x0af0, 0x6791)},
443 	{default_port_device(0x0af0, 0x6811)},
444 	{default_port_device(0x0af0, 0x6911)},
445 	{default_port_device(0x0af0, 0x6951)},
446 	{default_port_device(0x0af0, 0x6971)},
447 	{default_port_device(0x0af0, 0x7011)},
448 	{default_port_device(0x0af0, 0x7031)},
449 	{default_port_device(0x0af0, 0x7051)},
450 	{default_port_device(0x0af0, 0x7071)},
451 	{default_port_device(0x0af0, 0x7111)},
452 	{default_port_device(0x0af0, 0x7211)},
453 	{default_port_device(0x0af0, 0x7251)},
454 	{default_port_device(0x0af0, 0x7271)},
455 	{default_port_device(0x0af0, 0x7311)},
456 	{default_port_device(0x0af0, 0xc031)},	/* Icon-Edge */
457 	{icon321_port_device(0x0af0, 0xd013)},	/* Module HSxPA */
458 	{icon321_port_device(0x0af0, 0xd031)},	/* Icon-321 */
459 	{icon321_port_device(0x0af0, 0xd033)},	/* Icon-322 */
460 	{USB_DEVICE(0x0af0, 0x7301)},		/* GE40x */
461 	{USB_DEVICE(0x0af0, 0x7361)},		/* GE40x */
462 	{USB_DEVICE(0x0af0, 0x7381)},		/* GE40x */
463 	{USB_DEVICE(0x0af0, 0x7401)},		/* GI 0401 */
464 	{USB_DEVICE(0x0af0, 0x7501)},		/* GTM 382 */
465 	{USB_DEVICE(0x0af0, 0x7601)},		/* GE40x */
466 	{USB_DEVICE(0x0af0, 0x7701)},
467 	{USB_DEVICE(0x0af0, 0x7706)},
468 	{USB_DEVICE(0x0af0, 0x7801)},
469 	{USB_DEVICE(0x0af0, 0x7901)},
470 	{USB_DEVICE(0x0af0, 0x7A01)},
471 	{USB_DEVICE(0x0af0, 0x7A05)},
472 	{USB_DEVICE(0x0af0, 0x8200)},
473 	{USB_DEVICE(0x0af0, 0x8201)},
474 	{USB_DEVICE(0x0af0, 0x8300)},
475 	{USB_DEVICE(0x0af0, 0x8302)},
476 	{USB_DEVICE(0x0af0, 0x8304)},
477 	{USB_DEVICE(0x0af0, 0x8400)},
478 	{USB_DEVICE(0x0af0, 0xd035)},
479 	{USB_DEVICE(0x0af0, 0xd055)},
480 	{USB_DEVICE(0x0af0, 0xd155)},
481 	{USB_DEVICE(0x0af0, 0xd255)},
482 	{USB_DEVICE(0x0af0, 0xd057)},
483 	{USB_DEVICE(0x0af0, 0xd157)},
484 	{USB_DEVICE(0x0af0, 0xd257)},
485 	{USB_DEVICE(0x0af0, 0xd357)},
486 	{USB_DEVICE(0x0af0, 0xd058)},
487 	{USB_DEVICE(0x0af0, 0xc100)},
488 	{}
489 };
490 MODULE_DEVICE_TABLE(usb, hso_ids);
491 
492 /* Sysfs attribute */
493 static ssize_t hso_sysfs_show_porttype(struct device *dev,
494 				       struct device_attribute *attr,
495 				       char *buf)
496 {
497 	struct hso_device *hso_dev = dev_get_drvdata(dev);
498 	char *port_name;
499 
500 	if (!hso_dev)
501 		return 0;
502 
503 	switch (hso_dev->port_spec & HSO_PORT_MASK) {
504 	case HSO_PORT_CONTROL:
505 		port_name = "Control";
506 		break;
507 	case HSO_PORT_APP:
508 		port_name = "Application";
509 		break;
510 	case HSO_PORT_APP2:
511 		port_name = "Application2";
512 		break;
513 	case HSO_PORT_GPS:
514 		port_name = "GPS";
515 		break;
516 	case HSO_PORT_GPS_CONTROL:
517 		port_name = "GPS Control";
518 		break;
519 	case HSO_PORT_PCSC:
520 		port_name = "PCSC";
521 		break;
522 	case HSO_PORT_DIAG:
523 		port_name = "Diagnostic";
524 		break;
525 	case HSO_PORT_DIAG2:
526 		port_name = "Diagnostic2";
527 		break;
528 	case HSO_PORT_MODEM:
529 		port_name = "Modem";
530 		break;
531 	case HSO_PORT_NETWORK:
532 		port_name = "Network";
533 		break;
534 	default:
535 		port_name = "Unknown";
536 		break;
537 	}
538 
539 	return sprintf(buf, "%s\n", port_name);
540 }
541 static DEVICE_ATTR(hsotype, S_IRUGO, hso_sysfs_show_porttype, NULL);
542 
543 static int hso_urb_to_index(struct hso_serial *serial, struct urb *urb)
544 {
545 	int idx;
546 
547 	for (idx = 0; idx < serial->num_rx_urbs; idx++)
548 		if (serial->rx_urb[idx] == urb)
549 			return idx;
550 	dev_err(serial->parent->dev, "hso_urb_to_index failed\n");
551 	return -1;
552 }
553 
554 /* converts mux value to a port spec value */
555 static u32 hso_mux_to_port(int mux)
556 {
557 	u32 result;
558 
559 	switch (mux) {
560 	case 0x1:
561 		result = HSO_PORT_CONTROL;
562 		break;
563 	case 0x2:
564 		result = HSO_PORT_APP;
565 		break;
566 	case 0x4:
567 		result = HSO_PORT_PCSC;
568 		break;
569 	case 0x8:
570 		result = HSO_PORT_GPS;
571 		break;
572 	case 0x10:
573 		result = HSO_PORT_APP2;
574 		break;
575 	default:
576 		result = HSO_PORT_NO_PORT;
577 	}
578 	return result;
579 }
580 
581 /* converts port spec value to a mux value */
582 static u32 hso_port_to_mux(int port)
583 {
584 	u32 result;
585 
586 	switch (port & HSO_PORT_MASK) {
587 	case HSO_PORT_CONTROL:
588 		result = 0x0;
589 		break;
590 	case HSO_PORT_APP:
591 		result = 0x1;
592 		break;
593 	case HSO_PORT_PCSC:
594 		result = 0x2;
595 		break;
596 	case HSO_PORT_GPS:
597 		result = 0x3;
598 		break;
599 	case HSO_PORT_APP2:
600 		result = 0x4;
601 		break;
602 	default:
603 		result = 0x0;
604 	}
605 	return result;
606 }
607 
608 static struct hso_serial *get_serial_by_shared_int_and_type(
609 					struct hso_shared_int *shared_int,
610 					int mux)
611 {
612 	int i, port;
613 
614 	port = hso_mux_to_port(mux);
615 
616 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
617 		if (serial_table[i] &&
618 		    (dev2ser(serial_table[i])->shared_int == shared_int) &&
619 		    ((serial_table[i]->port_spec & HSO_PORT_MASK) == port)) {
620 			return dev2ser(serial_table[i]);
621 		}
622 	}
623 
624 	return NULL;
625 }
626 
627 static struct hso_serial *get_serial_by_index(unsigned index)
628 {
629 	struct hso_serial *serial = NULL;
630 	unsigned long flags;
631 
632 	spin_lock_irqsave(&serial_table_lock, flags);
633 	if (serial_table[index])
634 		serial = dev2ser(serial_table[index]);
635 	spin_unlock_irqrestore(&serial_table_lock, flags);
636 
637 	return serial;
638 }
639 
640 static int get_free_serial_index(void)
641 {
642 	int index;
643 	unsigned long flags;
644 
645 	spin_lock_irqsave(&serial_table_lock, flags);
646 	for (index = 0; index < HSO_SERIAL_TTY_MINORS; index++) {
647 		if (serial_table[index] == NULL) {
648 			spin_unlock_irqrestore(&serial_table_lock, flags);
649 			return index;
650 		}
651 	}
652 	spin_unlock_irqrestore(&serial_table_lock, flags);
653 
654 	printk(KERN_ERR "%s: no free serial devices in table\n", __func__);
655 	return -1;
656 }
657 
658 static void set_serial_by_index(unsigned index, struct hso_serial *serial)
659 {
660 	unsigned long flags;
661 
662 	spin_lock_irqsave(&serial_table_lock, flags);
663 	if (serial)
664 		serial_table[index] = serial->parent;
665 	else
666 		serial_table[index] = NULL;
667 	spin_unlock_irqrestore(&serial_table_lock, flags);
668 }
669 
670 static void handle_usb_error(int status, const char *function,
671 			     struct hso_device *hso_dev)
672 {
673 	char *explanation;
674 
675 	switch (status) {
676 	case -ENODEV:
677 		explanation = "no device";
678 		break;
679 	case -ENOENT:
680 		explanation = "endpoint not enabled";
681 		break;
682 	case -EPIPE:
683 		explanation = "endpoint stalled";
684 		break;
685 	case -ENOSPC:
686 		explanation = "not enough bandwidth";
687 		break;
688 	case -ESHUTDOWN:
689 		explanation = "device disabled";
690 		break;
691 	case -EHOSTUNREACH:
692 		explanation = "device suspended";
693 		break;
694 	case -EINVAL:
695 	case -EAGAIN:
696 	case -EFBIG:
697 	case -EMSGSIZE:
698 		explanation = "internal error";
699 		break;
700 	case -EILSEQ:
701 	case -EPROTO:
702 	case -ETIME:
703 	case -ETIMEDOUT:
704 		explanation = "protocol error";
705 		if (hso_dev)
706 			schedule_work(&hso_dev->reset_device);
707 		break;
708 	default:
709 		explanation = "unknown status";
710 		break;
711 	}
712 
713 	/* log a meaningful explanation of an USB status */
714 	D1("%s: received USB status - %s (%d)", function, explanation, status);
715 }
716 
717 /* Network interface functions */
718 
719 /* called when net interface is brought up by ifconfig */
720 static int hso_net_open(struct net_device *net)
721 {
722 	struct hso_net *odev = netdev_priv(net);
723 	unsigned long flags = 0;
724 
725 	if (!odev) {
726 		dev_err(&net->dev, "No net device !\n");
727 		return -ENODEV;
728 	}
729 
730 	odev->skb_tx_buf = NULL;
731 
732 	/* setup environment */
733 	spin_lock_irqsave(&odev->net_lock, flags);
734 	odev->rx_parse_state = WAIT_IP;
735 	odev->rx_buf_size = 0;
736 	odev->rx_buf_missing = sizeof(struct iphdr);
737 	spin_unlock_irqrestore(&odev->net_lock, flags);
738 
739 	/* We are up and running. */
740 	set_bit(HSO_NET_RUNNING, &odev->flags);
741 	hso_start_net_device(odev->parent);
742 
743 	/* Tell the kernel we are ready to start receiving from it */
744 	netif_start_queue(net);
745 
746 	return 0;
747 }
748 
749 /* called when interface is brought down by ifconfig */
750 static int hso_net_close(struct net_device *net)
751 {
752 	struct hso_net *odev = netdev_priv(net);
753 
754 	/* we don't need the queue anymore */
755 	netif_stop_queue(net);
756 	/* no longer running */
757 	clear_bit(HSO_NET_RUNNING, &odev->flags);
758 
759 	hso_stop_net_device(odev->parent);
760 
761 	/* done */
762 	return 0;
763 }
764 
765 /* USB tells is xmit done, we should start the netqueue again */
766 static void write_bulk_callback(struct urb *urb)
767 {
768 	struct hso_net *odev = urb->context;
769 	int status = urb->status;
770 
771 	/* Sanity check */
772 	if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) {
773 		dev_err(&urb->dev->dev, "%s: device not running\n", __func__);
774 		return;
775 	}
776 
777 	/* Do we still have a valid kernel network device? */
778 	if (!netif_device_present(odev->net)) {
779 		dev_err(&urb->dev->dev, "%s: net device not present\n",
780 			__func__);
781 		return;
782 	}
783 
784 	/* log status, but don't act on it, we don't need to resubmit anything
785 	 * anyhow */
786 	if (status)
787 		handle_usb_error(status, __func__, odev->parent);
788 
789 	hso_put_activity(odev->parent);
790 
791 	/* Tell the network interface we are ready for another frame */
792 	netif_wake_queue(odev->net);
793 }
794 
795 /* called by kernel when we need to transmit a packet */
796 static netdev_tx_t hso_net_start_xmit(struct sk_buff *skb,
797 					    struct net_device *net)
798 {
799 	struct hso_net *odev = netdev_priv(net);
800 	int result;
801 
802 	/* Tell the kernel, "No more frames 'til we are done with this one." */
803 	netif_stop_queue(net);
804 	if (hso_get_activity(odev->parent) == -EAGAIN) {
805 		odev->skb_tx_buf = skb;
806 		return NETDEV_TX_OK;
807 	}
808 
809 	/* log if asked */
810 	DUMP1(skb->data, skb->len);
811 	/* Copy it from kernel memory to OUR memory */
812 	memcpy(odev->mux_bulk_tx_buf, skb->data, skb->len);
813 	D1("len: %d/%d", skb->len, MUX_BULK_TX_BUF_SIZE);
814 
815 	/* Fill in the URB for shipping it out. */
816 	usb_fill_bulk_urb(odev->mux_bulk_tx_urb,
817 			  odev->parent->usb,
818 			  usb_sndbulkpipe(odev->parent->usb,
819 					  odev->out_endp->
820 					  bEndpointAddress & 0x7F),
821 			  odev->mux_bulk_tx_buf, skb->len, write_bulk_callback,
822 			  odev);
823 
824 	/* Deal with the Zero Length packet problem, I hope */
825 	odev->mux_bulk_tx_urb->transfer_flags |= URB_ZERO_PACKET;
826 
827 	/* Send the URB on its merry way. */
828 	result = usb_submit_urb(odev->mux_bulk_tx_urb, GFP_ATOMIC);
829 	if (result) {
830 		dev_warn(&odev->parent->interface->dev,
831 			"failed mux_bulk_tx_urb %d\n", result);
832 		net->stats.tx_errors++;
833 		netif_start_queue(net);
834 	} else {
835 		net->stats.tx_packets++;
836 		net->stats.tx_bytes += skb->len;
837 		/* And tell the kernel when the last transmit started. */
838 		net->trans_start = jiffies;
839 	}
840 	dev_kfree_skb(skb);
841 	/* we're done */
842 	return NETDEV_TX_OK;
843 }
844 
845 static void hso_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info)
846 {
847 	struct hso_net *odev = netdev_priv(net);
848 
849 	strncpy(info->driver, driver_name, ETHTOOL_BUSINFO_LEN);
850 	strncpy(info->version, DRIVER_VERSION, ETHTOOL_BUSINFO_LEN);
851 	usb_make_path(odev->parent->usb, info->bus_info, sizeof info->bus_info);
852 }
853 
854 static const struct ethtool_ops ops = {
855 	.get_drvinfo = hso_get_drvinfo,
856 	.get_link = ethtool_op_get_link
857 };
858 
859 /* called when a packet did not ack after watchdogtimeout */
860 static void hso_net_tx_timeout(struct net_device *net)
861 {
862 	struct hso_net *odev = netdev_priv(net);
863 
864 	if (!odev)
865 		return;
866 
867 	/* Tell syslog we are hosed. */
868 	dev_warn(&net->dev, "Tx timed out.\n");
869 
870 	/* Tear the waiting frame off the list */
871 	if (odev->mux_bulk_tx_urb &&
872 	    (odev->mux_bulk_tx_urb->status == -EINPROGRESS))
873 		usb_unlink_urb(odev->mux_bulk_tx_urb);
874 
875 	/* Update statistics */
876 	net->stats.tx_errors++;
877 }
878 
879 /* make a real packet from the received USB buffer */
880 static void packetizeRx(struct hso_net *odev, unsigned char *ip_pkt,
881 			unsigned int count, unsigned char is_eop)
882 {
883 	unsigned short temp_bytes;
884 	unsigned short buffer_offset = 0;
885 	unsigned short frame_len;
886 	unsigned char *tmp_rx_buf;
887 
888 	/* log if needed */
889 	D1("Rx %d bytes", count);
890 	DUMP(ip_pkt, min(128, (int)count));
891 
892 	while (count) {
893 		switch (odev->rx_parse_state) {
894 		case WAIT_IP:
895 			/* waiting for IP header. */
896 			/* wanted bytes - size of ip header */
897 			temp_bytes =
898 			    (count <
899 			     odev->rx_buf_missing) ? count : odev->
900 			    rx_buf_missing;
901 
902 			memcpy(((unsigned char *)(&odev->rx_ip_hdr)) +
903 			       odev->rx_buf_size, ip_pkt + buffer_offset,
904 			       temp_bytes);
905 
906 			odev->rx_buf_size += temp_bytes;
907 			buffer_offset += temp_bytes;
908 			odev->rx_buf_missing -= temp_bytes;
909 			count -= temp_bytes;
910 
911 			if (!odev->rx_buf_missing) {
912 				/* header is complete allocate an sk_buffer and
913 				 * continue to WAIT_DATA */
914 				frame_len = ntohs(odev->rx_ip_hdr.tot_len);
915 
916 				if ((frame_len > DEFAULT_MRU) ||
917 				    (frame_len < sizeof(struct iphdr))) {
918 					dev_err(&odev->net->dev,
919 						"Invalid frame (%d) length\n",
920 						frame_len);
921 					odev->rx_parse_state = WAIT_SYNC;
922 					continue;
923 				}
924 				/* Allocate an sk_buff */
925 				odev->skb_rx_buf = netdev_alloc_skb(odev->net,
926 								    frame_len);
927 				if (!odev->skb_rx_buf) {
928 					/* We got no receive buffer. */
929 					D1("could not allocate memory");
930 					odev->rx_parse_state = WAIT_SYNC;
931 					return;
932 				}
933 
934 				/* Copy what we got so far. make room for iphdr
935 				 * after tail. */
936 				tmp_rx_buf =
937 				    skb_put(odev->skb_rx_buf,
938 					    sizeof(struct iphdr));
939 				memcpy(tmp_rx_buf, (char *)&(odev->rx_ip_hdr),
940 				       sizeof(struct iphdr));
941 
942 				/* ETH_HLEN */
943 				odev->rx_buf_size = sizeof(struct iphdr);
944 
945 				/* Filip actually use .tot_len */
946 				odev->rx_buf_missing =
947 				    frame_len - sizeof(struct iphdr);
948 				odev->rx_parse_state = WAIT_DATA;
949 			}
950 			break;
951 
952 		case WAIT_DATA:
953 			temp_bytes = (count < odev->rx_buf_missing)
954 					? count : odev->rx_buf_missing;
955 
956 			/* Copy the rest of the bytes that are left in the
957 			 * buffer into the waiting sk_buf. */
958 			/* Make room for temp_bytes after tail. */
959 			tmp_rx_buf = skb_put(odev->skb_rx_buf, temp_bytes);
960 			memcpy(tmp_rx_buf, ip_pkt + buffer_offset, temp_bytes);
961 
962 			odev->rx_buf_missing -= temp_bytes;
963 			count -= temp_bytes;
964 			buffer_offset += temp_bytes;
965 			odev->rx_buf_size += temp_bytes;
966 			if (!odev->rx_buf_missing) {
967 				/* Packet is complete. Inject into stack. */
968 				/* We have IP packet here */
969 				odev->skb_rx_buf->protocol = cpu_to_be16(ETH_P_IP);
970 				/* don't check it */
971 				odev->skb_rx_buf->ip_summed =
972 					CHECKSUM_UNNECESSARY;
973 
974 				skb_reset_mac_header(odev->skb_rx_buf);
975 
976 				/* Ship it off to the kernel */
977 				netif_rx(odev->skb_rx_buf);
978 				/* No longer our buffer. */
979 				odev->skb_rx_buf = NULL;
980 
981 				/* update out statistics */
982 				odev->net->stats.rx_packets++;
983 
984 				odev->net->stats.rx_bytes += odev->rx_buf_size;
985 
986 				odev->rx_buf_size = 0;
987 				odev->rx_buf_missing = sizeof(struct iphdr);
988 				odev->rx_parse_state = WAIT_IP;
989 			}
990 			break;
991 
992 		case WAIT_SYNC:
993 			D1(" W_S");
994 			count = 0;
995 			break;
996 		default:
997 			D1(" ");
998 			count--;
999 			break;
1000 		}
1001 	}
1002 
1003 	/* Recovery mechanism for WAIT_SYNC state. */
1004 	if (is_eop) {
1005 		if (odev->rx_parse_state == WAIT_SYNC) {
1006 			odev->rx_parse_state = WAIT_IP;
1007 			odev->rx_buf_size = 0;
1008 			odev->rx_buf_missing = sizeof(struct iphdr);
1009 		}
1010 	}
1011 }
1012 
1013 /* Moving data from usb to kernel (in interrupt state) */
1014 static void read_bulk_callback(struct urb *urb)
1015 {
1016 	struct hso_net *odev = urb->context;
1017 	struct net_device *net;
1018 	int result;
1019 	int status = urb->status;
1020 
1021 	/* is al ok?  (Filip: Who's Al ?) */
1022 	if (status) {
1023 		handle_usb_error(status, __func__, odev->parent);
1024 		return;
1025 	}
1026 
1027 	/* Sanity check */
1028 	if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) {
1029 		D1("BULK IN callback but driver is not active!");
1030 		return;
1031 	}
1032 	usb_mark_last_busy(urb->dev);
1033 
1034 	net = odev->net;
1035 
1036 	if (!netif_device_present(net)) {
1037 		/* Somebody killed our network interface... */
1038 		return;
1039 	}
1040 
1041 	if (odev->parent->port_spec & HSO_INFO_CRC_BUG) {
1042 		u32 rest;
1043 		u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
1044 		rest = urb->actual_length %
1045 			le16_to_cpu(odev->in_endp->wMaxPacketSize);
1046 		if (((rest == 5) || (rest == 6)) &&
1047 		    !memcmp(((u8 *) urb->transfer_buffer) +
1048 			    urb->actual_length - 4, crc_check, 4)) {
1049 			urb->actual_length -= 4;
1050 		}
1051 	}
1052 
1053 	/* do we even have a packet? */
1054 	if (urb->actual_length) {
1055 		/* Handle the IP stream, add header and push it onto network
1056 		 * stack if the packet is complete. */
1057 		spin_lock(&odev->net_lock);
1058 		packetizeRx(odev, urb->transfer_buffer, urb->actual_length,
1059 			    (urb->transfer_buffer_length >
1060 			     urb->actual_length) ? 1 : 0);
1061 		spin_unlock(&odev->net_lock);
1062 	}
1063 
1064 	/* We are done with this URB, resubmit it. Prep the USB to wait for
1065 	 * another frame. Reuse same as received. */
1066 	usb_fill_bulk_urb(urb,
1067 			  odev->parent->usb,
1068 			  usb_rcvbulkpipe(odev->parent->usb,
1069 					  odev->in_endp->
1070 					  bEndpointAddress & 0x7F),
1071 			  urb->transfer_buffer, MUX_BULK_RX_BUF_SIZE,
1072 			  read_bulk_callback, odev);
1073 
1074 	/* Give this to the USB subsystem so it can tell us when more data
1075 	 * arrives. */
1076 	result = usb_submit_urb(urb, GFP_ATOMIC);
1077 	if (result)
1078 		dev_warn(&odev->parent->interface->dev,
1079 			 "%s failed submit mux_bulk_rx_urb %d\n", __func__,
1080 			 result);
1081 }
1082 
1083 /* Serial driver functions */
1084 
1085 static void hso_init_termios(struct ktermios *termios)
1086 {
1087 	/*
1088 	 * The default requirements for this device are:
1089 	 */
1090 	termios->c_iflag &=
1091 		~(IGNBRK	/* disable ignore break */
1092 		| BRKINT	/* disable break causes interrupt */
1093 		| PARMRK	/* disable mark parity errors */
1094 		| ISTRIP	/* disable clear high bit of input characters */
1095 		| INLCR		/* disable translate NL to CR */
1096 		| IGNCR		/* disable ignore CR */
1097 		| ICRNL		/* disable translate CR to NL */
1098 		| IXON);	/* disable enable XON/XOFF flow control */
1099 
1100 	/* disable postprocess output characters */
1101 	termios->c_oflag &= ~OPOST;
1102 
1103 	termios->c_lflag &=
1104 		~(ECHO		/* disable echo input characters */
1105 		| ECHONL	/* disable echo new line */
1106 		| ICANON	/* disable erase, kill, werase, and rprnt
1107 				   special characters */
1108 		| ISIG		/* disable interrupt, quit, and suspend special
1109 				   characters */
1110 		| IEXTEN);	/* disable non-POSIX special characters */
1111 
1112 	termios->c_cflag &=
1113 		~(CSIZE		/* no size */
1114 		| PARENB	/* disable parity bit */
1115 		| CBAUD		/* clear current baud rate */
1116 		| CBAUDEX);	/* clear current buad rate */
1117 
1118 	termios->c_cflag |= CS8;	/* character size 8 bits */
1119 
1120 	/* baud rate 115200 */
1121 	tty_termios_encode_baud_rate(termios, 115200, 115200);
1122 }
1123 
1124 static void _hso_serial_set_termios(struct tty_struct *tty,
1125 				    struct ktermios *old)
1126 {
1127 	struct hso_serial *serial = get_serial_by_tty(tty);
1128 	struct ktermios *termios;
1129 
1130 	if (!serial) {
1131 		printk(KERN_ERR "%s: no tty structures", __func__);
1132 		return;
1133 	}
1134 
1135 	D4("port %d", serial->minor);
1136 
1137 	/*
1138 	 *	Fix up unsupported bits
1139 	 */
1140 	termios = tty->termios;
1141 	termios->c_iflag &= ~IXON; /* disable enable XON/XOFF flow control */
1142 
1143 	termios->c_cflag &=
1144 		~(CSIZE		/* no size */
1145 		| PARENB	/* disable parity bit */
1146 		| CBAUD		/* clear current baud rate */
1147 		| CBAUDEX);	/* clear current buad rate */
1148 
1149 	termios->c_cflag |= CS8;	/* character size 8 bits */
1150 
1151 	/* baud rate 115200 */
1152 	tty_encode_baud_rate(tty, 115200, 115200);
1153 }
1154 
1155 static void hso_resubmit_rx_bulk_urb(struct hso_serial *serial, struct urb *urb)
1156 {
1157 	int result;
1158 	/* We are done with this URB, resubmit it. Prep the USB to wait for
1159 	 * another frame */
1160 	usb_fill_bulk_urb(urb, serial->parent->usb,
1161 			  usb_rcvbulkpipe(serial->parent->usb,
1162 					  serial->in_endp->
1163 					  bEndpointAddress & 0x7F),
1164 			  urb->transfer_buffer, serial->rx_data_length,
1165 			  hso_std_serial_read_bulk_callback, serial);
1166 	/* Give this to the USB subsystem so it can tell us when more data
1167 	 * arrives. */
1168 	result = usb_submit_urb(urb, GFP_ATOMIC);
1169 	if (result) {
1170 		dev_err(&urb->dev->dev, "%s failed submit serial rx_urb %d\n",
1171 			__func__, result);
1172 	}
1173 }
1174 
1175 
1176 
1177 
1178 static void put_rxbuf_data_and_resubmit_bulk_urb(struct hso_serial *serial)
1179 {
1180 	int count;
1181 	struct urb *curr_urb;
1182 
1183 	while (serial->rx_urb_filled[serial->curr_rx_urb_idx]) {
1184 		curr_urb = serial->rx_urb[serial->curr_rx_urb_idx];
1185 		count = put_rxbuf_data(curr_urb, serial);
1186 		if (count == -1)
1187 			return;
1188 		if (count == 0) {
1189 			serial->curr_rx_urb_idx++;
1190 			if (serial->curr_rx_urb_idx >= serial->num_rx_urbs)
1191 				serial->curr_rx_urb_idx = 0;
1192 			hso_resubmit_rx_bulk_urb(serial, curr_urb);
1193 		}
1194 	}
1195 }
1196 
1197 static void put_rxbuf_data_and_resubmit_ctrl_urb(struct hso_serial *serial)
1198 {
1199 	int count = 0;
1200 	struct urb *urb;
1201 
1202 	urb = serial->rx_urb[0];
1203 	if (serial->open_count > 0) {
1204 		count = put_rxbuf_data(urb, serial);
1205 		if (count == -1)
1206 			return;
1207 	}
1208 	/* Re issue a read as long as we receive data. */
1209 
1210 	if (count == 0 && ((urb->actual_length != 0) ||
1211 			   (serial->rx_state == RX_PENDING))) {
1212 		serial->rx_state = RX_SENT;
1213 		hso_mux_serial_read(serial);
1214 	} else
1215 		serial->rx_state = RX_IDLE;
1216 }
1217 
1218 
1219 /* read callback for Diag and CS port */
1220 static void hso_std_serial_read_bulk_callback(struct urb *urb)
1221 {
1222 	struct hso_serial *serial = urb->context;
1223 	int status = urb->status;
1224 
1225 	/* sanity check */
1226 	if (!serial) {
1227 		D1("serial == NULL");
1228 		return;
1229 	} else if (status) {
1230 		handle_usb_error(status, __func__, serial->parent);
1231 		return;
1232 	}
1233 
1234 	D4("\n--- Got serial_read_bulk callback %02x ---", status);
1235 	D1("Actual length = %d\n", urb->actual_length);
1236 	DUMP1(urb->transfer_buffer, urb->actual_length);
1237 
1238 	/* Anyone listening? */
1239 	if (serial->open_count == 0)
1240 		return;
1241 
1242 	if (status == 0) {
1243 		if (serial->parent->port_spec & HSO_INFO_CRC_BUG) {
1244 			u32 rest;
1245 			u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
1246 			rest =
1247 			    urb->actual_length %
1248 			    le16_to_cpu(serial->in_endp->wMaxPacketSize);
1249 			if (((rest == 5) || (rest == 6)) &&
1250 			    !memcmp(((u8 *) urb->transfer_buffer) +
1251 				    urb->actual_length - 4, crc_check, 4)) {
1252 				urb->actual_length -= 4;
1253 			}
1254 		}
1255 		/* Valid data, handle RX data */
1256 		spin_lock(&serial->serial_lock);
1257 		serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 1;
1258 		put_rxbuf_data_and_resubmit_bulk_urb(serial);
1259 		spin_unlock(&serial->serial_lock);
1260 	} else if (status == -ENOENT || status == -ECONNRESET) {
1261 		/* Unlinked - check for throttled port. */
1262 		D2("Port %d, successfully unlinked urb", serial->minor);
1263 		spin_lock(&serial->serial_lock);
1264 		serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
1265 		hso_resubmit_rx_bulk_urb(serial, urb);
1266 		spin_unlock(&serial->serial_lock);
1267 	} else {
1268 		D2("Port %d, status = %d for read urb", serial->minor, status);
1269 		return;
1270 	}
1271 }
1272 
1273 /*
1274  * This needs to be a tasklet otherwise we will
1275  * end up recursively calling this function.
1276  */
1277 static void hso_unthrottle_tasklet(struct hso_serial *serial)
1278 {
1279 	unsigned long flags;
1280 
1281 	spin_lock_irqsave(&serial->serial_lock, flags);
1282 	if ((serial->parent->port_spec & HSO_INTF_MUX))
1283 		put_rxbuf_data_and_resubmit_ctrl_urb(serial);
1284 	else
1285 		put_rxbuf_data_and_resubmit_bulk_urb(serial);
1286 	spin_unlock_irqrestore(&serial->serial_lock, flags);
1287 }
1288 
1289 static	void hso_unthrottle(struct tty_struct *tty)
1290 {
1291 	struct hso_serial *serial = get_serial_by_tty(tty);
1292 
1293 	tasklet_hi_schedule(&serial->unthrottle_tasklet);
1294 }
1295 
1296 static void hso_unthrottle_workfunc(struct work_struct *work)
1297 {
1298 	struct hso_serial *serial =
1299 	    container_of(work, struct hso_serial,
1300 			 retry_unthrottle_workqueue);
1301 	hso_unthrottle_tasklet(serial);
1302 }
1303 
1304 /* open the requested serial port */
1305 static int hso_serial_open(struct tty_struct *tty, struct file *filp)
1306 {
1307 	struct hso_serial *serial = get_serial_by_index(tty->index);
1308 	int result;
1309 
1310 	/* sanity check */
1311 	if (serial == NULL || serial->magic != HSO_SERIAL_MAGIC) {
1312 		WARN_ON(1);
1313 		tty->driver_data = NULL;
1314 		D1("Failed to open port");
1315 		return -ENODEV;
1316 	}
1317 
1318 	mutex_lock(&serial->parent->mutex);
1319 	result = usb_autopm_get_interface(serial->parent->interface);
1320 	if (result < 0)
1321 		goto err_out;
1322 
1323 	D1("Opening %d", serial->minor);
1324 	kref_get(&serial->parent->ref);
1325 
1326 	/* setup */
1327 	spin_lock_irq(&serial->serial_lock);
1328 	tty->driver_data = serial;
1329 	tty_kref_put(serial->tty);
1330 	serial->tty = tty_kref_get(tty);
1331 	spin_unlock_irq(&serial->serial_lock);
1332 
1333 	/* check for port already opened, if not set the termios */
1334 	serial->open_count++;
1335 	if (serial->open_count == 1) {
1336 		tty->low_latency = 1;
1337 		serial->rx_state = RX_IDLE;
1338 		/* Force default termio settings */
1339 		_hso_serial_set_termios(tty, NULL);
1340 		tasklet_init(&serial->unthrottle_tasklet,
1341 			     (void (*)(unsigned long))hso_unthrottle_tasklet,
1342 			     (unsigned long)serial);
1343 		INIT_WORK(&serial->retry_unthrottle_workqueue,
1344 			  hso_unthrottle_workfunc);
1345 		result = hso_start_serial_device(serial->parent, GFP_KERNEL);
1346 		if (result) {
1347 			hso_stop_serial_device(serial->parent);
1348 			serial->open_count--;
1349 			kref_put(&serial->parent->ref, hso_serial_ref_free);
1350 		}
1351 	} else {
1352 		D1("Port was already open");
1353 	}
1354 
1355 	usb_autopm_put_interface(serial->parent->interface);
1356 
1357 	/* done */
1358 	if (result)
1359 		hso_serial_tiocmset(tty, NULL, TIOCM_RTS | TIOCM_DTR, 0);
1360 err_out:
1361 	mutex_unlock(&serial->parent->mutex);
1362 	return result;
1363 }
1364 
1365 /* close the requested serial port */
1366 static void hso_serial_close(struct tty_struct *tty, struct file *filp)
1367 {
1368 	struct hso_serial *serial = tty->driver_data;
1369 	u8 usb_gone;
1370 
1371 	D1("Closing serial port");
1372 
1373 	/* Open failed, no close cleanup required */
1374 	if (serial == NULL)
1375 		return;
1376 
1377 	mutex_lock(&serial->parent->mutex);
1378 	usb_gone = serial->parent->usb_gone;
1379 
1380 	if (!usb_gone)
1381 		usb_autopm_get_interface(serial->parent->interface);
1382 
1383 	/* reset the rts and dtr */
1384 	/* do the actual close */
1385 	serial->open_count--;
1386 
1387 	if (serial->open_count <= 0) {
1388 		serial->open_count = 0;
1389 		spin_lock_irq(&serial->serial_lock);
1390 		if (serial->tty == tty) {
1391 			serial->tty->driver_data = NULL;
1392 			serial->tty = NULL;
1393 			tty_kref_put(tty);
1394 		}
1395 		spin_unlock_irq(&serial->serial_lock);
1396 		if (!usb_gone)
1397 			hso_stop_serial_device(serial->parent);
1398 		tasklet_kill(&serial->unthrottle_tasklet);
1399 		cancel_work_sync(&serial->retry_unthrottle_workqueue);
1400 	}
1401 
1402 	if (!usb_gone)
1403 		usb_autopm_put_interface(serial->parent->interface);
1404 
1405 	mutex_unlock(&serial->parent->mutex);
1406 
1407 	kref_put(&serial->parent->ref, hso_serial_ref_free);
1408 }
1409 
1410 /* close the requested serial port */
1411 static int hso_serial_write(struct tty_struct *tty, const unsigned char *buf,
1412 			    int count)
1413 {
1414 	struct hso_serial *serial = get_serial_by_tty(tty);
1415 	int space, tx_bytes;
1416 	unsigned long flags;
1417 
1418 	/* sanity check */
1419 	if (serial == NULL) {
1420 		printk(KERN_ERR "%s: serial is NULL\n", __func__);
1421 		return -ENODEV;
1422 	}
1423 
1424 	spin_lock_irqsave(&serial->serial_lock, flags);
1425 
1426 	space = serial->tx_data_length - serial->tx_buffer_count;
1427 	tx_bytes = (count < space) ? count : space;
1428 
1429 	if (!tx_bytes)
1430 		goto out;
1431 
1432 	memcpy(serial->tx_buffer + serial->tx_buffer_count, buf, tx_bytes);
1433 	serial->tx_buffer_count += tx_bytes;
1434 
1435 out:
1436 	spin_unlock_irqrestore(&serial->serial_lock, flags);
1437 
1438 	hso_kick_transmit(serial);
1439 	/* done */
1440 	return tx_bytes;
1441 }
1442 
1443 /* how much room is there for writing */
1444 static int hso_serial_write_room(struct tty_struct *tty)
1445 {
1446 	struct hso_serial *serial = get_serial_by_tty(tty);
1447 	int room;
1448 	unsigned long flags;
1449 
1450 	spin_lock_irqsave(&serial->serial_lock, flags);
1451 	room = serial->tx_data_length - serial->tx_buffer_count;
1452 	spin_unlock_irqrestore(&serial->serial_lock, flags);
1453 
1454 	/* return free room */
1455 	return room;
1456 }
1457 
1458 /* setup the term */
1459 static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old)
1460 {
1461 	struct hso_serial *serial = get_serial_by_tty(tty);
1462 	unsigned long flags;
1463 
1464 	if (old)
1465 		D5("Termios called with: cflags new[%d] - old[%d]",
1466 		   tty->termios->c_cflag, old->c_cflag);
1467 
1468 	/* the actual setup */
1469 	spin_lock_irqsave(&serial->serial_lock, flags);
1470 	if (serial->open_count)
1471 		_hso_serial_set_termios(tty, old);
1472 	else
1473 		tty->termios = old;
1474 	spin_unlock_irqrestore(&serial->serial_lock, flags);
1475 
1476 	/* done */
1477 	return;
1478 }
1479 
1480 /* how many characters in the buffer */
1481 static int hso_serial_chars_in_buffer(struct tty_struct *tty)
1482 {
1483 	struct hso_serial *serial = get_serial_by_tty(tty);
1484 	int chars;
1485 	unsigned long flags;
1486 
1487 	/* sanity check */
1488 	if (serial == NULL)
1489 		return 0;
1490 
1491 	spin_lock_irqsave(&serial->serial_lock, flags);
1492 	chars = serial->tx_buffer_count;
1493 	spin_unlock_irqrestore(&serial->serial_lock, flags);
1494 
1495 	return chars;
1496 }
1497 static int tiocmget_submit_urb(struct hso_serial *serial,
1498 			       struct hso_tiocmget *tiocmget,
1499 			       struct usb_device *usb)
1500 {
1501 	int result;
1502 
1503 	if (serial->parent->usb_gone)
1504 		return -ENODEV;
1505 	usb_fill_int_urb(tiocmget->urb, usb,
1506 			 usb_rcvintpipe(usb,
1507 					tiocmget->endp->
1508 					bEndpointAddress & 0x7F),
1509 			 &tiocmget->serial_state_notification,
1510 			 sizeof(struct hso_serial_state_notification),
1511 			 tiocmget_intr_callback, serial,
1512 			 tiocmget->endp->bInterval);
1513 	result = usb_submit_urb(tiocmget->urb, GFP_ATOMIC);
1514 	if (result) {
1515 		dev_warn(&usb->dev, "%s usb_submit_urb failed %d\n", __func__,
1516 			 result);
1517 	}
1518 	return result;
1519 
1520 }
1521 
1522 static void tiocmget_intr_callback(struct urb *urb)
1523 {
1524 	struct hso_serial *serial = urb->context;
1525 	struct hso_tiocmget *tiocmget;
1526 	int status = urb->status;
1527 	u16 UART_state_bitmap, prev_UART_state_bitmap;
1528 	struct uart_icount *icount;
1529 	struct hso_serial_state_notification *serial_state_notification;
1530 	struct usb_device *usb;
1531 
1532 	/* Sanity checks */
1533 	if (!serial)
1534 		return;
1535 	if (status) {
1536 		handle_usb_error(status, __func__, serial->parent);
1537 		return;
1538 	}
1539 	tiocmget = serial->tiocmget;
1540 	if (!tiocmget)
1541 		return;
1542 	usb = serial->parent->usb;
1543 	serial_state_notification = &tiocmget->serial_state_notification;
1544 	if (serial_state_notification->bmRequestType != BM_REQUEST_TYPE ||
1545 	    serial_state_notification->bNotification != B_NOTIFICATION ||
1546 	    le16_to_cpu(serial_state_notification->wValue) != W_VALUE ||
1547 	    le16_to_cpu(serial_state_notification->wIndex) != W_INDEX ||
1548 	    le16_to_cpu(serial_state_notification->wLength) != W_LENGTH) {
1549 		dev_warn(&usb->dev,
1550 			 "hso received invalid serial state notification\n");
1551 		DUMP(serial_state_notification,
1552 		     sizeof(struct hso_serial_state_notification));
1553 	} else {
1554 
1555 		UART_state_bitmap = le16_to_cpu(serial_state_notification->
1556 						UART_state_bitmap);
1557 		prev_UART_state_bitmap = tiocmget->prev_UART_state_bitmap;
1558 		icount = &tiocmget->icount;
1559 		spin_lock(&serial->serial_lock);
1560 		if ((UART_state_bitmap & B_OVERRUN) !=
1561 		   (prev_UART_state_bitmap & B_OVERRUN))
1562 			icount->parity++;
1563 		if ((UART_state_bitmap & B_PARITY) !=
1564 		   (prev_UART_state_bitmap & B_PARITY))
1565 			icount->parity++;
1566 		if ((UART_state_bitmap & B_FRAMING) !=
1567 		   (prev_UART_state_bitmap & B_FRAMING))
1568 			icount->frame++;
1569 		if ((UART_state_bitmap & B_RING_SIGNAL) &&
1570 		   !(prev_UART_state_bitmap & B_RING_SIGNAL))
1571 			icount->rng++;
1572 		if ((UART_state_bitmap & B_BREAK) !=
1573 		   (prev_UART_state_bitmap & B_BREAK))
1574 			icount->brk++;
1575 		if ((UART_state_bitmap & B_TX_CARRIER) !=
1576 		   (prev_UART_state_bitmap & B_TX_CARRIER))
1577 			icount->dsr++;
1578 		if ((UART_state_bitmap & B_RX_CARRIER) !=
1579 		   (prev_UART_state_bitmap & B_RX_CARRIER))
1580 			icount->dcd++;
1581 		tiocmget->prev_UART_state_bitmap = UART_state_bitmap;
1582 		spin_unlock(&serial->serial_lock);
1583 		tiocmget->intr_completed = 1;
1584 		wake_up_interruptible(&tiocmget->waitq);
1585 	}
1586 	memset(serial_state_notification, 0,
1587 	       sizeof(struct hso_serial_state_notification));
1588 	tiocmget_submit_urb(serial,
1589 			    tiocmget,
1590 			    serial->parent->usb);
1591 }
1592 
1593 /*
1594  * next few functions largely stolen from drivers/serial/serial_core.c
1595  */
1596 /* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
1597  * - mask passed in arg for lines of interest
1598  *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
1599  * Caller should use TIOCGICOUNT to see which one it was
1600  */
1601 static int
1602 hso_wait_modem_status(struct hso_serial *serial, unsigned long arg)
1603 {
1604 	DECLARE_WAITQUEUE(wait, current);
1605 	struct uart_icount cprev, cnow;
1606 	struct hso_tiocmget  *tiocmget;
1607 	int ret;
1608 
1609 	tiocmget = serial->tiocmget;
1610 	if (!tiocmget)
1611 		return -ENOENT;
1612 	/*
1613 	 * note the counters on entry
1614 	 */
1615 	spin_lock_irq(&serial->serial_lock);
1616 	memcpy(&cprev, &tiocmget->icount, sizeof(struct uart_icount));
1617 	spin_unlock_irq(&serial->serial_lock);
1618 	add_wait_queue(&tiocmget->waitq, &wait);
1619 	for (;;) {
1620 		spin_lock_irq(&serial->serial_lock);
1621 		memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
1622 		spin_unlock_irq(&serial->serial_lock);
1623 		set_current_state(TASK_INTERRUPTIBLE);
1624 		if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
1625 		    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
1626 		    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd))) {
1627 			ret = 0;
1628 			break;
1629 		}
1630 		schedule();
1631 		/* see if a signal did it */
1632 		if (signal_pending(current)) {
1633 			ret = -ERESTARTSYS;
1634 			break;
1635 		}
1636 		cprev = cnow;
1637 	}
1638 	current->state = TASK_RUNNING;
1639 	remove_wait_queue(&tiocmget->waitq, &wait);
1640 
1641 	return ret;
1642 }
1643 
1644 /*
1645  * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
1646  * Return: write counters to the user passed counter struct
1647  * NB: both 1->0 and 0->1 transitions are counted except for
1648  *     RI where only 0->1 is counted.
1649  */
1650 static int hso_get_count(struct hso_serial *serial,
1651 			  struct serial_icounter_struct __user *icnt)
1652 {
1653 	struct serial_icounter_struct icount;
1654 	struct uart_icount cnow;
1655 	struct hso_tiocmget  *tiocmget = serial->tiocmget;
1656 
1657 	if (!tiocmget)
1658 		 return -ENOENT;
1659 	spin_lock_irq(&serial->serial_lock);
1660 	memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
1661 	spin_unlock_irq(&serial->serial_lock);
1662 
1663 	icount.cts         = cnow.cts;
1664 	icount.dsr         = cnow.dsr;
1665 	icount.rng         = cnow.rng;
1666 	icount.dcd         = cnow.dcd;
1667 	icount.rx          = cnow.rx;
1668 	icount.tx          = cnow.tx;
1669 	icount.frame       = cnow.frame;
1670 	icount.overrun     = cnow.overrun;
1671 	icount.parity      = cnow.parity;
1672 	icount.brk         = cnow.brk;
1673 	icount.buf_overrun = cnow.buf_overrun;
1674 
1675 	return copy_to_user(icnt, &icount, sizeof(icount)) ? -EFAULT : 0;
1676 }
1677 
1678 
1679 static int hso_serial_tiocmget(struct tty_struct *tty, struct file *file)
1680 {
1681 	int retval;
1682 	struct hso_serial *serial = get_serial_by_tty(tty);
1683 	struct hso_tiocmget  *tiocmget;
1684 	u16 UART_state_bitmap;
1685 
1686 	/* sanity check */
1687 	if (!serial) {
1688 		D1("no tty structures");
1689 		return -EINVAL;
1690 	}
1691 	spin_lock_irq(&serial->serial_lock);
1692 	retval = ((serial->rts_state) ? TIOCM_RTS : 0) |
1693 	    ((serial->dtr_state) ? TIOCM_DTR : 0);
1694 	tiocmget = serial->tiocmget;
1695 	if (tiocmget) {
1696 
1697 		UART_state_bitmap = le16_to_cpu(
1698 			tiocmget->prev_UART_state_bitmap);
1699 		if (UART_state_bitmap & B_RING_SIGNAL)
1700 			retval |=  TIOCM_RNG;
1701 		if (UART_state_bitmap & B_RX_CARRIER)
1702 			retval |=  TIOCM_CD;
1703 		if (UART_state_bitmap & B_TX_CARRIER)
1704 			retval |=  TIOCM_DSR;
1705 	}
1706 	spin_unlock_irq(&serial->serial_lock);
1707 	return retval;
1708 }
1709 
1710 static int hso_serial_tiocmset(struct tty_struct *tty, struct file *file,
1711 			       unsigned int set, unsigned int clear)
1712 {
1713 	int val = 0;
1714 	unsigned long flags;
1715 	int if_num;
1716 	struct hso_serial *serial = get_serial_by_tty(tty);
1717 
1718 	/* sanity check */
1719 	if (!serial) {
1720 		D1("no tty structures");
1721 		return -EINVAL;
1722 	}
1723 
1724 	if ((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM)
1725 		return -EINVAL;
1726 
1727 	if_num = serial->parent->interface->altsetting->desc.bInterfaceNumber;
1728 
1729 	spin_lock_irqsave(&serial->serial_lock, flags);
1730 	if (set & TIOCM_RTS)
1731 		serial->rts_state = 1;
1732 	if (set & TIOCM_DTR)
1733 		serial->dtr_state = 1;
1734 
1735 	if (clear & TIOCM_RTS)
1736 		serial->rts_state = 0;
1737 	if (clear & TIOCM_DTR)
1738 		serial->dtr_state = 0;
1739 
1740 	if (serial->dtr_state)
1741 		val |= 0x01;
1742 	if (serial->rts_state)
1743 		val |= 0x02;
1744 
1745 	spin_unlock_irqrestore(&serial->serial_lock, flags);
1746 
1747 	return usb_control_msg(serial->parent->usb,
1748 			       usb_rcvctrlpipe(serial->parent->usb, 0), 0x22,
1749 			       0x21, val, if_num, NULL, 0,
1750 			       USB_CTRL_SET_TIMEOUT);
1751 }
1752 
1753 static int hso_serial_ioctl(struct tty_struct *tty, struct file *file,
1754 			    unsigned int cmd, unsigned long arg)
1755 {
1756 	struct hso_serial *serial =  get_serial_by_tty(tty);
1757 	void __user *uarg = (void __user *)arg;
1758 	int ret = 0;
1759 	D4("IOCTL cmd: %d, arg: %ld", cmd, arg);
1760 
1761 	if (!serial)
1762 		return -ENODEV;
1763 	switch (cmd) {
1764 	case TIOCMIWAIT:
1765 		ret = hso_wait_modem_status(serial, arg);
1766 		break;
1767 
1768 	case TIOCGICOUNT:
1769 		ret = hso_get_count(serial, uarg);
1770 		break;
1771 	default:
1772 		ret = -ENOIOCTLCMD;
1773 		break;
1774 	}
1775 	return ret;
1776 }
1777 
1778 
1779 /* starts a transmit */
1780 static void hso_kick_transmit(struct hso_serial *serial)
1781 {
1782 	u8 *temp;
1783 	unsigned long flags;
1784 	int res;
1785 
1786 	spin_lock_irqsave(&serial->serial_lock, flags);
1787 	if (!serial->tx_buffer_count)
1788 		goto out;
1789 
1790 	if (serial->tx_urb_used)
1791 		goto out;
1792 
1793 	/* Wakeup USB interface if necessary */
1794 	if (hso_get_activity(serial->parent) == -EAGAIN)
1795 		goto out;
1796 
1797 	/* Switch pointers around to avoid memcpy */
1798 	temp = serial->tx_buffer;
1799 	serial->tx_buffer = serial->tx_data;
1800 	serial->tx_data = temp;
1801 	serial->tx_data_count = serial->tx_buffer_count;
1802 	serial->tx_buffer_count = 0;
1803 
1804 	/* If temp is set, it means we switched buffers */
1805 	if (temp && serial->write_data) {
1806 		res = serial->write_data(serial);
1807 		if (res >= 0)
1808 			serial->tx_urb_used = 1;
1809 	}
1810 out:
1811 	spin_unlock_irqrestore(&serial->serial_lock, flags);
1812 }
1813 
1814 /* make a request (for reading and writing data to muxed serial port) */
1815 static int mux_device_request(struct hso_serial *serial, u8 type, u16 port,
1816 			      struct urb *ctrl_urb,
1817 			      struct usb_ctrlrequest *ctrl_req,
1818 			      u8 *ctrl_urb_data, u32 size)
1819 {
1820 	int result;
1821 	int pipe;
1822 
1823 	/* Sanity check */
1824 	if (!serial || !ctrl_urb || !ctrl_req) {
1825 		printk(KERN_ERR "%s: Wrong arguments\n", __func__);
1826 		return -EINVAL;
1827 	}
1828 
1829 	/* initialize */
1830 	ctrl_req->wValue = 0;
1831 	ctrl_req->wIndex = cpu_to_le16(hso_port_to_mux(port));
1832 	ctrl_req->wLength = cpu_to_le16(size);
1833 
1834 	if (type == USB_CDC_GET_ENCAPSULATED_RESPONSE) {
1835 		/* Reading command */
1836 		ctrl_req->bRequestType = USB_DIR_IN |
1837 					 USB_TYPE_OPTION_VENDOR |
1838 					 USB_RECIP_INTERFACE;
1839 		ctrl_req->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
1840 		pipe = usb_rcvctrlpipe(serial->parent->usb, 0);
1841 	} else {
1842 		/* Writing command */
1843 		ctrl_req->bRequestType = USB_DIR_OUT |
1844 					 USB_TYPE_OPTION_VENDOR |
1845 					 USB_RECIP_INTERFACE;
1846 		ctrl_req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND;
1847 		pipe = usb_sndctrlpipe(serial->parent->usb, 0);
1848 	}
1849 	/* syslog */
1850 	D2("%s command (%02x) len: %d, port: %d",
1851 	   type == USB_CDC_GET_ENCAPSULATED_RESPONSE ? "Read" : "Write",
1852 	   ctrl_req->bRequestType, ctrl_req->wLength, port);
1853 
1854 	/* Load ctrl urb */
1855 	ctrl_urb->transfer_flags = 0;
1856 	usb_fill_control_urb(ctrl_urb,
1857 			     serial->parent->usb,
1858 			     pipe,
1859 			     (u8 *) ctrl_req,
1860 			     ctrl_urb_data, size, ctrl_callback, serial);
1861 	/* Send it on merry way */
1862 	result = usb_submit_urb(ctrl_urb, GFP_ATOMIC);
1863 	if (result) {
1864 		dev_err(&ctrl_urb->dev->dev,
1865 			"%s failed submit ctrl_urb %d type %d\n", __func__,
1866 			result, type);
1867 		return result;
1868 	}
1869 
1870 	/* done */
1871 	return size;
1872 }
1873 
1874 /* called by intr_callback when read occurs */
1875 static int hso_mux_serial_read(struct hso_serial *serial)
1876 {
1877 	if (!serial)
1878 		return -EINVAL;
1879 
1880 	/* clean data */
1881 	memset(serial->rx_data[0], 0, CTRL_URB_RX_SIZE);
1882 	/* make the request */
1883 
1884 	if (serial->num_rx_urbs != 1) {
1885 		dev_err(&serial->parent->interface->dev,
1886 			"ERROR: mux'd reads with multiple buffers "
1887 			"not possible\n");
1888 		return 0;
1889 	}
1890 	return mux_device_request(serial,
1891 				  USB_CDC_GET_ENCAPSULATED_RESPONSE,
1892 				  serial->parent->port_spec & HSO_PORT_MASK,
1893 				  serial->rx_urb[0],
1894 				  &serial->ctrl_req_rx,
1895 				  serial->rx_data[0], serial->rx_data_length);
1896 }
1897 
1898 /* used for muxed serial port callback (muxed serial read) */
1899 static void intr_callback(struct urb *urb)
1900 {
1901 	struct hso_shared_int *shared_int = urb->context;
1902 	struct hso_serial *serial;
1903 	unsigned char *port_req;
1904 	int status = urb->status;
1905 	int i;
1906 
1907 	usb_mark_last_busy(urb->dev);
1908 
1909 	/* sanity check */
1910 	if (!shared_int)
1911 		return;
1912 
1913 	/* status check */
1914 	if (status) {
1915 		handle_usb_error(status, __func__, NULL);
1916 		return;
1917 	}
1918 	D4("\n--- Got intr callback 0x%02X ---", status);
1919 
1920 	/* what request? */
1921 	port_req = urb->transfer_buffer;
1922 	D4(" port_req = 0x%.2X\n", *port_req);
1923 	/* loop over all muxed ports to find the one sending this */
1924 	for (i = 0; i < 8; i++) {
1925 		/* max 8 channels on MUX */
1926 		if (*port_req & (1 << i)) {
1927 			serial = get_serial_by_shared_int_and_type(shared_int,
1928 								   (1 << i));
1929 			if (serial != NULL) {
1930 				D1("Pending read interrupt on port %d\n", i);
1931 				spin_lock(&serial->serial_lock);
1932 				if (serial->rx_state == RX_IDLE &&
1933 					serial->open_count > 0) {
1934 					/* Setup and send a ctrl req read on
1935 					 * port i */
1936 					if (!serial->rx_urb_filled[0]) {
1937 						serial->rx_state = RX_SENT;
1938 						hso_mux_serial_read(serial);
1939 					} else
1940 						serial->rx_state = RX_PENDING;
1941 				} else {
1942 					D1("Already a read pending on "
1943 					   "port %d or port not open\n", i);
1944 				}
1945 				spin_unlock(&serial->serial_lock);
1946 			}
1947 		}
1948 	}
1949 	/* Resubmit interrupt urb */
1950 	hso_mux_submit_intr_urb(shared_int, urb->dev, GFP_ATOMIC);
1951 }
1952 
1953 /* called for writing to muxed serial port */
1954 static int hso_mux_serial_write_data(struct hso_serial *serial)
1955 {
1956 	if (NULL == serial)
1957 		return -EINVAL;
1958 
1959 	return mux_device_request(serial,
1960 				  USB_CDC_SEND_ENCAPSULATED_COMMAND,
1961 				  serial->parent->port_spec & HSO_PORT_MASK,
1962 				  serial->tx_urb,
1963 				  &serial->ctrl_req_tx,
1964 				  serial->tx_data, serial->tx_data_count);
1965 }
1966 
1967 /* write callback for Diag and CS port */
1968 static void hso_std_serial_write_bulk_callback(struct urb *urb)
1969 {
1970 	struct hso_serial *serial = urb->context;
1971 	int status = urb->status;
1972 	struct tty_struct *tty;
1973 
1974 	/* sanity check */
1975 	if (!serial) {
1976 		D1("serial == NULL");
1977 		return;
1978 	}
1979 
1980 	spin_lock(&serial->serial_lock);
1981 	serial->tx_urb_used = 0;
1982 	tty = tty_kref_get(serial->tty);
1983 	spin_unlock(&serial->serial_lock);
1984 	if (status) {
1985 		handle_usb_error(status, __func__, serial->parent);
1986 		tty_kref_put(tty);
1987 		return;
1988 	}
1989 	hso_put_activity(serial->parent);
1990 	if (tty) {
1991 		tty_wakeup(tty);
1992 		tty_kref_put(tty);
1993 	}
1994 	hso_kick_transmit(serial);
1995 
1996 	D1(" ");
1997 	return;
1998 }
1999 
2000 /* called for writing diag or CS serial port */
2001 static int hso_std_serial_write_data(struct hso_serial *serial)
2002 {
2003 	int count = serial->tx_data_count;
2004 	int result;
2005 
2006 	usb_fill_bulk_urb(serial->tx_urb,
2007 			  serial->parent->usb,
2008 			  usb_sndbulkpipe(serial->parent->usb,
2009 					  serial->out_endp->
2010 					  bEndpointAddress & 0x7F),
2011 			  serial->tx_data, serial->tx_data_count,
2012 			  hso_std_serial_write_bulk_callback, serial);
2013 
2014 	result = usb_submit_urb(serial->tx_urb, GFP_ATOMIC);
2015 	if (result) {
2016 		dev_warn(&serial->parent->usb->dev,
2017 			 "Failed to submit urb - res %d\n", result);
2018 		return result;
2019 	}
2020 
2021 	return count;
2022 }
2023 
2024 /* callback after read or write on muxed serial port */
2025 static void ctrl_callback(struct urb *urb)
2026 {
2027 	struct hso_serial *serial = urb->context;
2028 	struct usb_ctrlrequest *req;
2029 	int status = urb->status;
2030 	struct tty_struct *tty;
2031 
2032 	/* sanity check */
2033 	if (!serial)
2034 		return;
2035 
2036 	spin_lock(&serial->serial_lock);
2037 	serial->tx_urb_used = 0;
2038 	tty = tty_kref_get(serial->tty);
2039 	spin_unlock(&serial->serial_lock);
2040 	if (status) {
2041 		handle_usb_error(status, __func__, serial->parent);
2042 		tty_kref_put(tty);
2043 		return;
2044 	}
2045 
2046 	/* what request? */
2047 	req = (struct usb_ctrlrequest *)(urb->setup_packet);
2048 	D4("\n--- Got muxed ctrl callback 0x%02X ---", status);
2049 	D4("Actual length of urb = %d\n", urb->actual_length);
2050 	DUMP1(urb->transfer_buffer, urb->actual_length);
2051 
2052 	if (req->bRequestType ==
2053 	    (USB_DIR_IN | USB_TYPE_OPTION_VENDOR | USB_RECIP_INTERFACE)) {
2054 		/* response to a read command */
2055 		serial->rx_urb_filled[0] = 1;
2056 		spin_lock(&serial->serial_lock);
2057 		put_rxbuf_data_and_resubmit_ctrl_urb(serial);
2058 		spin_unlock(&serial->serial_lock);
2059 	} else {
2060 		hso_put_activity(serial->parent);
2061 		if (tty)
2062 			tty_wakeup(tty);
2063 		/* response to a write command */
2064 		hso_kick_transmit(serial);
2065 	}
2066 	tty_kref_put(tty);
2067 }
2068 
2069 /* handle RX data for serial port */
2070 static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
2071 {
2072 	struct tty_struct *tty;
2073 	int write_length_remaining = 0;
2074 	int curr_write_len;
2075 
2076 	/* Sanity check */
2077 	if (urb == NULL || serial == NULL) {
2078 		D1("serial = NULL");
2079 		return -2;
2080 	}
2081 
2082 	/* All callers to put_rxbuf_data hold serial_lock */
2083 	tty = tty_kref_get(serial->tty);
2084 
2085 	/* Push data to tty */
2086 	if (tty) {
2087 		write_length_remaining = urb->actual_length -
2088 			serial->curr_rx_urb_offset;
2089 		D1("data to push to tty");
2090 		while (write_length_remaining) {
2091 			if (test_bit(TTY_THROTTLED, &tty->flags)) {
2092 				tty_kref_put(tty);
2093 				return -1;
2094 			}
2095 			curr_write_len =  tty_insert_flip_string
2096 				(tty, urb->transfer_buffer +
2097 				 serial->curr_rx_urb_offset,
2098 				 write_length_remaining);
2099 			serial->curr_rx_urb_offset += curr_write_len;
2100 			write_length_remaining -= curr_write_len;
2101 			tty_flip_buffer_push(tty);
2102 		}
2103 	}
2104 	if (write_length_remaining == 0) {
2105 		serial->curr_rx_urb_offset = 0;
2106 		serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
2107 	}
2108 	tty_kref_put(tty);
2109 	return write_length_remaining;
2110 }
2111 
2112 
2113 /* Base driver functions */
2114 
2115 static void hso_log_port(struct hso_device *hso_dev)
2116 {
2117 	char *port_type;
2118 	char port_dev[20];
2119 
2120 	switch (hso_dev->port_spec & HSO_PORT_MASK) {
2121 	case HSO_PORT_CONTROL:
2122 		port_type = "Control";
2123 		break;
2124 	case HSO_PORT_APP:
2125 		port_type = "Application";
2126 		break;
2127 	case HSO_PORT_GPS:
2128 		port_type = "GPS";
2129 		break;
2130 	case HSO_PORT_GPS_CONTROL:
2131 		port_type = "GPS control";
2132 		break;
2133 	case HSO_PORT_APP2:
2134 		port_type = "Application2";
2135 		break;
2136 	case HSO_PORT_PCSC:
2137 		port_type = "PCSC";
2138 		break;
2139 	case HSO_PORT_DIAG:
2140 		port_type = "Diagnostic";
2141 		break;
2142 	case HSO_PORT_DIAG2:
2143 		port_type = "Diagnostic2";
2144 		break;
2145 	case HSO_PORT_MODEM:
2146 		port_type = "Modem";
2147 		break;
2148 	case HSO_PORT_NETWORK:
2149 		port_type = "Network";
2150 		break;
2151 	default:
2152 		port_type = "Unknown";
2153 		break;
2154 	}
2155 	if ((hso_dev->port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
2156 		sprintf(port_dev, "%s", dev2net(hso_dev)->net->name);
2157 	} else
2158 		sprintf(port_dev, "/dev/%s%d", tty_filename,
2159 			dev2ser(hso_dev)->minor);
2160 
2161 	dev_dbg(&hso_dev->interface->dev, "HSO: Found %s port %s\n",
2162 		port_type, port_dev);
2163 }
2164 
2165 static int hso_start_net_device(struct hso_device *hso_dev)
2166 {
2167 	int i, result = 0;
2168 	struct hso_net *hso_net = dev2net(hso_dev);
2169 
2170 	if (!hso_net)
2171 		return -ENODEV;
2172 
2173 	/* send URBs for all read buffers */
2174 	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
2175 
2176 		/* Prep a receive URB */
2177 		usb_fill_bulk_urb(hso_net->mux_bulk_rx_urb_pool[i],
2178 				  hso_dev->usb,
2179 				  usb_rcvbulkpipe(hso_dev->usb,
2180 						  hso_net->in_endp->
2181 						  bEndpointAddress & 0x7F),
2182 				  hso_net->mux_bulk_rx_buf_pool[i],
2183 				  MUX_BULK_RX_BUF_SIZE, read_bulk_callback,
2184 				  hso_net);
2185 
2186 		/* Put it out there so the device can send us stuff */
2187 		result = usb_submit_urb(hso_net->mux_bulk_rx_urb_pool[i],
2188 					GFP_NOIO);
2189 		if (result)
2190 			dev_warn(&hso_dev->usb->dev,
2191 				"%s failed mux_bulk_rx_urb[%d] %d\n", __func__,
2192 				i, result);
2193 	}
2194 
2195 	return result;
2196 }
2197 
2198 static int hso_stop_net_device(struct hso_device *hso_dev)
2199 {
2200 	int i;
2201 	struct hso_net *hso_net = dev2net(hso_dev);
2202 
2203 	if (!hso_net)
2204 		return -ENODEV;
2205 
2206 	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
2207 		if (hso_net->mux_bulk_rx_urb_pool[i])
2208 			usb_kill_urb(hso_net->mux_bulk_rx_urb_pool[i]);
2209 
2210 	}
2211 	if (hso_net->mux_bulk_tx_urb)
2212 		usb_kill_urb(hso_net->mux_bulk_tx_urb);
2213 
2214 	return 0;
2215 }
2216 
2217 static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags)
2218 {
2219 	int i, result = 0;
2220 	struct hso_serial *serial = dev2ser(hso_dev);
2221 
2222 	if (!serial)
2223 		return -ENODEV;
2224 
2225 	/* If it is not the MUX port fill in and submit a bulk urb (already
2226 	 * allocated in hso_serial_start) */
2227 	if (!(serial->parent->port_spec & HSO_INTF_MUX)) {
2228 		for (i = 0; i < serial->num_rx_urbs; i++) {
2229 			usb_fill_bulk_urb(serial->rx_urb[i],
2230 					  serial->parent->usb,
2231 					  usb_rcvbulkpipe(serial->parent->usb,
2232 							  serial->in_endp->
2233 							  bEndpointAddress &
2234 							  0x7F),
2235 					  serial->rx_data[i],
2236 					  serial->rx_data_length,
2237 					  hso_std_serial_read_bulk_callback,
2238 					  serial);
2239 			result = usb_submit_urb(serial->rx_urb[i], flags);
2240 			if (result) {
2241 				dev_warn(&serial->parent->usb->dev,
2242 					 "Failed to submit urb - res %d\n",
2243 					 result);
2244 				break;
2245 			}
2246 		}
2247 	} else {
2248 		mutex_lock(&serial->shared_int->shared_int_lock);
2249 		if (!serial->shared_int->use_count) {
2250 			result =
2251 			    hso_mux_submit_intr_urb(serial->shared_int,
2252 						    hso_dev->usb, flags);
2253 		}
2254 		serial->shared_int->use_count++;
2255 		mutex_unlock(&serial->shared_int->shared_int_lock);
2256 	}
2257 	if (serial->tiocmget)
2258 		tiocmget_submit_urb(serial,
2259 				    serial->tiocmget,
2260 				    serial->parent->usb);
2261 	return result;
2262 }
2263 
2264 static int hso_stop_serial_device(struct hso_device *hso_dev)
2265 {
2266 	int i;
2267 	struct hso_serial *serial = dev2ser(hso_dev);
2268 	struct hso_tiocmget  *tiocmget;
2269 
2270 	if (!serial)
2271 		return -ENODEV;
2272 
2273 	for (i = 0; i < serial->num_rx_urbs; i++) {
2274 		if (serial->rx_urb[i]) {
2275 				usb_kill_urb(serial->rx_urb[i]);
2276 				serial->rx_urb_filled[i] = 0;
2277 		}
2278 	}
2279 	serial->curr_rx_urb_idx = 0;
2280 	serial->curr_rx_urb_offset = 0;
2281 
2282 	if (serial->tx_urb)
2283 		usb_kill_urb(serial->tx_urb);
2284 
2285 	if (serial->shared_int) {
2286 		mutex_lock(&serial->shared_int->shared_int_lock);
2287 		if (serial->shared_int->use_count &&
2288 		    (--serial->shared_int->use_count == 0)) {
2289 			struct urb *urb;
2290 
2291 			urb = serial->shared_int->shared_intr_urb;
2292 			if (urb)
2293 				usb_kill_urb(urb);
2294 		}
2295 		mutex_unlock(&serial->shared_int->shared_int_lock);
2296 	}
2297 	tiocmget = serial->tiocmget;
2298 	if (tiocmget) {
2299 		wake_up_interruptible(&tiocmget->waitq);
2300 		usb_kill_urb(tiocmget->urb);
2301 	}
2302 
2303 	return 0;
2304 }
2305 
2306 static void hso_serial_common_free(struct hso_serial *serial)
2307 {
2308 	int i;
2309 
2310 	if (serial->parent->dev)
2311 		device_remove_file(serial->parent->dev, &dev_attr_hsotype);
2312 
2313 	tty_unregister_device(tty_drv, serial->minor);
2314 
2315 	for (i = 0; i < serial->num_rx_urbs; i++) {
2316 		/* unlink and free RX URB */
2317 		usb_free_urb(serial->rx_urb[i]);
2318 		/* free the RX buffer */
2319 		kfree(serial->rx_data[i]);
2320 	}
2321 
2322 	/* unlink and free TX URB */
2323 	usb_free_urb(serial->tx_urb);
2324 	kfree(serial->tx_data);
2325 }
2326 
2327 static int hso_serial_common_create(struct hso_serial *serial, int num_urbs,
2328 				    int rx_size, int tx_size)
2329 {
2330 	struct device *dev;
2331 	int minor;
2332 	int i;
2333 
2334 	minor = get_free_serial_index();
2335 	if (minor < 0)
2336 		goto exit;
2337 
2338 	/* register our minor number */
2339 	serial->parent->dev = tty_register_device(tty_drv, minor,
2340 					&serial->parent->interface->dev);
2341 	dev = serial->parent->dev;
2342 	dev_set_drvdata(dev, serial->parent);
2343 	i = device_create_file(dev, &dev_attr_hsotype);
2344 
2345 	/* fill in specific data for later use */
2346 	serial->minor = minor;
2347 	serial->magic = HSO_SERIAL_MAGIC;
2348 	spin_lock_init(&serial->serial_lock);
2349 	serial->num_rx_urbs = num_urbs;
2350 
2351 	/* RX, allocate urb and initialize */
2352 
2353 	/* prepare our RX buffer */
2354 	serial->rx_data_length = rx_size;
2355 	for (i = 0; i < serial->num_rx_urbs; i++) {
2356 		serial->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
2357 		if (!serial->rx_urb[i]) {
2358 			dev_err(dev, "Could not allocate urb?\n");
2359 			goto exit;
2360 		}
2361 		serial->rx_urb[i]->transfer_buffer = NULL;
2362 		serial->rx_urb[i]->transfer_buffer_length = 0;
2363 		serial->rx_data[i] = kzalloc(serial->rx_data_length,
2364 					     GFP_KERNEL);
2365 		if (!serial->rx_data[i]) {
2366 			dev_err(dev, "%s - Out of memory\n", __func__);
2367 			goto exit;
2368 		}
2369 	}
2370 
2371 	/* TX, allocate urb and initialize */
2372 	serial->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
2373 	if (!serial->tx_urb) {
2374 		dev_err(dev, "Could not allocate urb?\n");
2375 		goto exit;
2376 	}
2377 	serial->tx_urb->transfer_buffer = NULL;
2378 	serial->tx_urb->transfer_buffer_length = 0;
2379 	/* prepare our TX buffer */
2380 	serial->tx_data_count = 0;
2381 	serial->tx_buffer_count = 0;
2382 	serial->tx_data_length = tx_size;
2383 	serial->tx_data = kzalloc(serial->tx_data_length, GFP_KERNEL);
2384 	if (!serial->tx_data) {
2385 		dev_err(dev, "%s - Out of memory\n", __func__);
2386 		goto exit;
2387 	}
2388 	serial->tx_buffer = kzalloc(serial->tx_data_length, GFP_KERNEL);
2389 	if (!serial->tx_buffer) {
2390 		dev_err(dev, "%s - Out of memory\n", __func__);
2391 		goto exit;
2392 	}
2393 
2394 	return 0;
2395 exit:
2396 	hso_serial_common_free(serial);
2397 	return -1;
2398 }
2399 
2400 /* Creates a general hso device */
2401 static struct hso_device *hso_create_device(struct usb_interface *intf,
2402 					    int port_spec)
2403 {
2404 	struct hso_device *hso_dev;
2405 
2406 	hso_dev = kzalloc(sizeof(*hso_dev), GFP_ATOMIC);
2407 	if (!hso_dev)
2408 		return NULL;
2409 
2410 	hso_dev->port_spec = port_spec;
2411 	hso_dev->usb = interface_to_usbdev(intf);
2412 	hso_dev->interface = intf;
2413 	kref_init(&hso_dev->ref);
2414 	mutex_init(&hso_dev->mutex);
2415 
2416 	INIT_WORK(&hso_dev->async_get_intf, async_get_intf);
2417 	INIT_WORK(&hso_dev->async_put_intf, async_put_intf);
2418 	INIT_WORK(&hso_dev->reset_device, reset_device);
2419 
2420 	return hso_dev;
2421 }
2422 
2423 /* Removes a network device in the network device table */
2424 static int remove_net_device(struct hso_device *hso_dev)
2425 {
2426 	int i;
2427 
2428 	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
2429 		if (network_table[i] == hso_dev) {
2430 			network_table[i] = NULL;
2431 			break;
2432 		}
2433 	}
2434 	if (i == HSO_MAX_NET_DEVICES)
2435 		return -1;
2436 	return 0;
2437 }
2438 
2439 /* Frees our network device */
2440 static void hso_free_net_device(struct hso_device *hso_dev)
2441 {
2442 	int i;
2443 	struct hso_net *hso_net = dev2net(hso_dev);
2444 
2445 	if (!hso_net)
2446 		return;
2447 
2448 	remove_net_device(hso_net->parent);
2449 
2450 	if (hso_net->net) {
2451 		unregister_netdev(hso_net->net);
2452 		free_netdev(hso_net->net);
2453 	}
2454 
2455 	/* start freeing */
2456 	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
2457 		usb_free_urb(hso_net->mux_bulk_rx_urb_pool[i]);
2458 		kfree(hso_net->mux_bulk_rx_buf_pool[i]);
2459 		hso_net->mux_bulk_rx_buf_pool[i] = NULL;
2460 	}
2461 	usb_free_urb(hso_net->mux_bulk_tx_urb);
2462 	kfree(hso_net->mux_bulk_tx_buf);
2463 	hso_net->mux_bulk_tx_buf = NULL;
2464 
2465 	kfree(hso_dev);
2466 }
2467 
2468 static const struct net_device_ops hso_netdev_ops = {
2469 	.ndo_open	= hso_net_open,
2470 	.ndo_stop	= hso_net_close,
2471 	.ndo_start_xmit = hso_net_start_xmit,
2472 	.ndo_tx_timeout = hso_net_tx_timeout,
2473 };
2474 
2475 /* initialize the network interface */
2476 static void hso_net_init(struct net_device *net)
2477 {
2478 	struct hso_net *hso_net = netdev_priv(net);
2479 
2480 	D1("sizeof hso_net is %d", (int)sizeof(*hso_net));
2481 
2482 	/* fill in the other fields */
2483 	net->netdev_ops = &hso_netdev_ops;
2484 	net->watchdog_timeo = HSO_NET_TX_TIMEOUT;
2485 	net->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
2486 	net->type = ARPHRD_NONE;
2487 	net->mtu = DEFAULT_MTU - 14;
2488 	net->tx_queue_len = 10;
2489 	SET_ETHTOOL_OPS(net, &ops);
2490 
2491 	/* and initialize the semaphore */
2492 	spin_lock_init(&hso_net->net_lock);
2493 }
2494 
2495 /* Adds a network device in the network device table */
2496 static int add_net_device(struct hso_device *hso_dev)
2497 {
2498 	int i;
2499 
2500 	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
2501 		if (network_table[i] == NULL) {
2502 			network_table[i] = hso_dev;
2503 			break;
2504 		}
2505 	}
2506 	if (i == HSO_MAX_NET_DEVICES)
2507 		return -1;
2508 	return 0;
2509 }
2510 
2511 static int hso_rfkill_set_block(void *data, bool blocked)
2512 {
2513 	struct hso_device *hso_dev = data;
2514 	int enabled = !blocked;
2515 	int rv;
2516 
2517 	mutex_lock(&hso_dev->mutex);
2518 	if (hso_dev->usb_gone)
2519 		rv = 0;
2520 	else
2521 		rv = usb_control_msg(hso_dev->usb, usb_rcvctrlpipe(hso_dev->usb, 0),
2522 				       enabled ? 0x82 : 0x81, 0x40, 0, 0, NULL, 0,
2523 				       USB_CTRL_SET_TIMEOUT);
2524 	mutex_unlock(&hso_dev->mutex);
2525 	return rv;
2526 }
2527 
2528 static const struct rfkill_ops hso_rfkill_ops = {
2529 	.set_block = hso_rfkill_set_block,
2530 };
2531 
2532 /* Creates and sets up everything for rfkill */
2533 static void hso_create_rfkill(struct hso_device *hso_dev,
2534 			     struct usb_interface *interface)
2535 {
2536 	struct hso_net *hso_net = dev2net(hso_dev);
2537 	struct device *dev = &hso_net->net->dev;
2538 	char *rfkn;
2539 
2540 	rfkn = kzalloc(20, GFP_KERNEL);
2541 	if (!rfkn)
2542 		dev_err(dev, "%s - Out of memory\n", __func__);
2543 
2544 	snprintf(rfkn, 20, "hso-%d",
2545 		 interface->altsetting->desc.bInterfaceNumber);
2546 
2547 	hso_net->rfkill = rfkill_alloc(rfkn,
2548 				       &interface_to_usbdev(interface)->dev,
2549 				       RFKILL_TYPE_WWAN,
2550 				       &hso_rfkill_ops, hso_dev);
2551 	if (!hso_net->rfkill) {
2552 		dev_err(dev, "%s - Out of memory\n", __func__);
2553 		kfree(rfkn);
2554 		return;
2555 	}
2556 	if (rfkill_register(hso_net->rfkill) < 0) {
2557 		rfkill_destroy(hso_net->rfkill);
2558 		kfree(rfkn);
2559 		hso_net->rfkill = NULL;
2560 		dev_err(dev, "%s - Failed to register rfkill\n", __func__);
2561 		return;
2562 	}
2563 }
2564 
2565 static struct device_type hso_type = {
2566 	.name	= "wwan",
2567 };
2568 
2569 /* Creates our network device */
2570 static struct hso_device *hso_create_net_device(struct usb_interface *interface,
2571 						int port_spec)
2572 {
2573 	int result, i;
2574 	struct net_device *net;
2575 	struct hso_net *hso_net;
2576 	struct hso_device *hso_dev;
2577 
2578 	hso_dev = hso_create_device(interface, port_spec);
2579 	if (!hso_dev)
2580 		return NULL;
2581 
2582 	/* allocate our network device, then we can put in our private data */
2583 	/* call hso_net_init to do the basic initialization */
2584 	net = alloc_netdev(sizeof(struct hso_net), "hso%d", hso_net_init);
2585 	if (!net) {
2586 		dev_err(&interface->dev, "Unable to create ethernet device\n");
2587 		goto exit;
2588 	}
2589 
2590 	hso_net = netdev_priv(net);
2591 
2592 	hso_dev->port_data.dev_net = hso_net;
2593 	hso_net->net = net;
2594 	hso_net->parent = hso_dev;
2595 
2596 	hso_net->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
2597 				      USB_DIR_IN);
2598 	if (!hso_net->in_endp) {
2599 		dev_err(&interface->dev, "Can't find BULK IN endpoint\n");
2600 		goto exit;
2601 	}
2602 	hso_net->out_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
2603 				       USB_DIR_OUT);
2604 	if (!hso_net->out_endp) {
2605 		dev_err(&interface->dev, "Can't find BULK OUT endpoint\n");
2606 		goto exit;
2607 	}
2608 	SET_NETDEV_DEV(net, &interface->dev);
2609 	SET_NETDEV_DEVTYPE(net, &hso_type);
2610 
2611 	/* registering our net device */
2612 	result = register_netdev(net);
2613 	if (result) {
2614 		dev_err(&interface->dev, "Failed to register device\n");
2615 		goto exit;
2616 	}
2617 
2618 	/* start allocating */
2619 	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
2620 		hso_net->mux_bulk_rx_urb_pool[i] = usb_alloc_urb(0, GFP_KERNEL);
2621 		if (!hso_net->mux_bulk_rx_urb_pool[i]) {
2622 			dev_err(&interface->dev, "Could not allocate rx urb\n");
2623 			goto exit;
2624 		}
2625 		hso_net->mux_bulk_rx_buf_pool[i] = kzalloc(MUX_BULK_RX_BUF_SIZE,
2626 							   GFP_KERNEL);
2627 		if (!hso_net->mux_bulk_rx_buf_pool[i]) {
2628 			dev_err(&interface->dev, "Could not allocate rx buf\n");
2629 			goto exit;
2630 		}
2631 	}
2632 	hso_net->mux_bulk_tx_urb = usb_alloc_urb(0, GFP_KERNEL);
2633 	if (!hso_net->mux_bulk_tx_urb) {
2634 		dev_err(&interface->dev, "Could not allocate tx urb\n");
2635 		goto exit;
2636 	}
2637 	hso_net->mux_bulk_tx_buf = kzalloc(MUX_BULK_TX_BUF_SIZE, GFP_KERNEL);
2638 	if (!hso_net->mux_bulk_tx_buf) {
2639 		dev_err(&interface->dev, "Could not allocate tx buf\n");
2640 		goto exit;
2641 	}
2642 
2643 	add_net_device(hso_dev);
2644 
2645 	hso_log_port(hso_dev);
2646 
2647 	hso_create_rfkill(hso_dev, interface);
2648 
2649 	return hso_dev;
2650 exit:
2651 	hso_free_net_device(hso_dev);
2652 	return NULL;
2653 }
2654 
2655 static void hso_free_tiomget(struct hso_serial *serial)
2656 {
2657 	struct hso_tiocmget *tiocmget = serial->tiocmget;
2658 	if (tiocmget) {
2659 		if (tiocmget->urb) {
2660 			usb_free_urb(tiocmget->urb);
2661 			tiocmget->urb = NULL;
2662 		}
2663 		serial->tiocmget = NULL;
2664 		kfree(tiocmget);
2665 
2666 	}
2667 }
2668 
2669 /* Frees an AT channel ( goes for both mux and non-mux ) */
2670 static void hso_free_serial_device(struct hso_device *hso_dev)
2671 {
2672 	struct hso_serial *serial = dev2ser(hso_dev);
2673 
2674 	if (!serial)
2675 		return;
2676 	set_serial_by_index(serial->minor, NULL);
2677 
2678 	hso_serial_common_free(serial);
2679 
2680 	if (serial->shared_int) {
2681 		mutex_lock(&serial->shared_int->shared_int_lock);
2682 		if (--serial->shared_int->ref_count == 0)
2683 			hso_free_shared_int(serial->shared_int);
2684 		else
2685 			mutex_unlock(&serial->shared_int->shared_int_lock);
2686 	}
2687 	hso_free_tiomget(serial);
2688 	kfree(serial);
2689 	kfree(hso_dev);
2690 }
2691 
2692 /* Creates a bulk AT channel */
2693 static struct hso_device *hso_create_bulk_serial_device(
2694 			struct usb_interface *interface, int port)
2695 {
2696 	struct hso_device *hso_dev;
2697 	struct hso_serial *serial;
2698 	int num_urbs;
2699 	struct hso_tiocmget *tiocmget;
2700 
2701 	hso_dev = hso_create_device(interface, port);
2702 	if (!hso_dev)
2703 		return NULL;
2704 
2705 	serial = kzalloc(sizeof(*serial), GFP_KERNEL);
2706 	if (!serial)
2707 		goto exit;
2708 
2709 	serial->parent = hso_dev;
2710 	hso_dev->port_data.dev_serial = serial;
2711 
2712 	if ((port & HSO_PORT_MASK) == HSO_PORT_MODEM) {
2713 		num_urbs = 2;
2714 		serial->tiocmget = kzalloc(sizeof(struct hso_tiocmget),
2715 					   GFP_KERNEL);
2716 		/* it isn't going to break our heart if serial->tiocmget
2717 		 *  allocation fails don't bother checking this.
2718 		 */
2719 		if (serial->tiocmget) {
2720 			tiocmget = serial->tiocmget;
2721 			tiocmget->urb = usb_alloc_urb(0, GFP_KERNEL);
2722 			if (tiocmget->urb) {
2723 				mutex_init(&tiocmget->mutex);
2724 				init_waitqueue_head(&tiocmget->waitq);
2725 				tiocmget->endp = hso_get_ep(
2726 					interface,
2727 					USB_ENDPOINT_XFER_INT,
2728 					USB_DIR_IN);
2729 			} else
2730 				hso_free_tiomget(serial);
2731 		}
2732 	}
2733 	else
2734 		num_urbs = 1;
2735 
2736 	if (hso_serial_common_create(serial, num_urbs, BULK_URB_RX_SIZE,
2737 				     BULK_URB_TX_SIZE))
2738 		goto exit;
2739 
2740 	serial->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
2741 				     USB_DIR_IN);
2742 	if (!serial->in_endp) {
2743 		dev_err(&interface->dev, "Failed to find BULK IN ep\n");
2744 		goto exit2;
2745 	}
2746 
2747 	if (!
2748 	    (serial->out_endp =
2749 	     hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, USB_DIR_OUT))) {
2750 		dev_err(&interface->dev, "Failed to find BULK IN ep\n");
2751 		goto exit2;
2752 	}
2753 
2754 	serial->write_data = hso_std_serial_write_data;
2755 
2756 	/* and record this serial */
2757 	set_serial_by_index(serial->minor, serial);
2758 
2759 	/* setup the proc dirs and files if needed */
2760 	hso_log_port(hso_dev);
2761 
2762 	/* done, return it */
2763 	return hso_dev;
2764 
2765 exit2:
2766 	hso_serial_common_free(serial);
2767 exit:
2768 	hso_free_tiomget(serial);
2769 	kfree(serial);
2770 	kfree(hso_dev);
2771 	return NULL;
2772 }
2773 
2774 /* Creates a multiplexed AT channel */
2775 static
2776 struct hso_device *hso_create_mux_serial_device(struct usb_interface *interface,
2777 						int port,
2778 						struct hso_shared_int *mux)
2779 {
2780 	struct hso_device *hso_dev;
2781 	struct hso_serial *serial;
2782 	int port_spec;
2783 
2784 	port_spec = HSO_INTF_MUX;
2785 	port_spec &= ~HSO_PORT_MASK;
2786 
2787 	port_spec |= hso_mux_to_port(port);
2788 	if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NO_PORT)
2789 		return NULL;
2790 
2791 	hso_dev = hso_create_device(interface, port_spec);
2792 	if (!hso_dev)
2793 		return NULL;
2794 
2795 	serial = kzalloc(sizeof(*serial), GFP_KERNEL);
2796 	if (!serial)
2797 		goto exit;
2798 
2799 	hso_dev->port_data.dev_serial = serial;
2800 	serial->parent = hso_dev;
2801 
2802 	if (hso_serial_common_create
2803 	    (serial, 1, CTRL_URB_RX_SIZE, CTRL_URB_TX_SIZE))
2804 		goto exit;
2805 
2806 	serial->tx_data_length--;
2807 	serial->write_data = hso_mux_serial_write_data;
2808 
2809 	serial->shared_int = mux;
2810 	mutex_lock(&serial->shared_int->shared_int_lock);
2811 	serial->shared_int->ref_count++;
2812 	mutex_unlock(&serial->shared_int->shared_int_lock);
2813 
2814 	/* and record this serial */
2815 	set_serial_by_index(serial->minor, serial);
2816 
2817 	/* setup the proc dirs and files if needed */
2818 	hso_log_port(hso_dev);
2819 
2820 	/* done, return it */
2821 	return hso_dev;
2822 
2823 exit:
2824 	if (serial) {
2825 		tty_unregister_device(tty_drv, serial->minor);
2826 		kfree(serial);
2827 	}
2828 	if (hso_dev)
2829 		kfree(hso_dev);
2830 	return NULL;
2831 
2832 }
2833 
2834 static void hso_free_shared_int(struct hso_shared_int *mux)
2835 {
2836 	usb_free_urb(mux->shared_intr_urb);
2837 	kfree(mux->shared_intr_buf);
2838 	mutex_unlock(&mux->shared_int_lock);
2839 	kfree(mux);
2840 }
2841 
2842 static
2843 struct hso_shared_int *hso_create_shared_int(struct usb_interface *interface)
2844 {
2845 	struct hso_shared_int *mux = kzalloc(sizeof(*mux), GFP_KERNEL);
2846 
2847 	if (!mux)
2848 		return NULL;
2849 
2850 	mux->intr_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_INT,
2851 				    USB_DIR_IN);
2852 	if (!mux->intr_endp) {
2853 		dev_err(&interface->dev, "Can't find INT IN endpoint\n");
2854 		goto exit;
2855 	}
2856 
2857 	mux->shared_intr_urb = usb_alloc_urb(0, GFP_KERNEL);
2858 	if (!mux->shared_intr_urb) {
2859 		dev_err(&interface->dev, "Could not allocate intr urb?\n");
2860 		goto exit;
2861 	}
2862 	mux->shared_intr_buf =
2863 		kzalloc(le16_to_cpu(mux->intr_endp->wMaxPacketSize),
2864 			GFP_KERNEL);
2865 	if (!mux->shared_intr_buf) {
2866 		dev_err(&interface->dev, "Could not allocate intr buf?\n");
2867 		goto exit;
2868 	}
2869 
2870 	mutex_init(&mux->shared_int_lock);
2871 
2872 	return mux;
2873 
2874 exit:
2875 	kfree(mux->shared_intr_buf);
2876 	usb_free_urb(mux->shared_intr_urb);
2877 	kfree(mux);
2878 	return NULL;
2879 }
2880 
2881 /* Gets the port spec for a certain interface */
2882 static int hso_get_config_data(struct usb_interface *interface)
2883 {
2884 	struct usb_device *usbdev = interface_to_usbdev(interface);
2885 	u8 config_data[17];
2886 	u32 if_num = interface->altsetting->desc.bInterfaceNumber;
2887 	s32 result;
2888 
2889 	if (usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0),
2890 			    0x86, 0xC0, 0, 0, config_data, 17,
2891 			    USB_CTRL_SET_TIMEOUT) != 0x11) {
2892 		return -EIO;
2893 	}
2894 
2895 	switch (config_data[if_num]) {
2896 	case 0x0:
2897 		result = 0;
2898 		break;
2899 	case 0x1:
2900 		result = HSO_PORT_DIAG;
2901 		break;
2902 	case 0x2:
2903 		result = HSO_PORT_GPS;
2904 		break;
2905 	case 0x3:
2906 		result = HSO_PORT_GPS_CONTROL;
2907 		break;
2908 	case 0x4:
2909 		result = HSO_PORT_APP;
2910 		break;
2911 	case 0x5:
2912 		result = HSO_PORT_APP2;
2913 		break;
2914 	case 0x6:
2915 		result = HSO_PORT_CONTROL;
2916 		break;
2917 	case 0x7:
2918 		result = HSO_PORT_NETWORK;
2919 		break;
2920 	case 0x8:
2921 		result = HSO_PORT_MODEM;
2922 		break;
2923 	case 0x9:
2924 		result = HSO_PORT_MSD;
2925 		break;
2926 	case 0xa:
2927 		result = HSO_PORT_PCSC;
2928 		break;
2929 	case 0xb:
2930 		result = HSO_PORT_VOICE;
2931 		break;
2932 	default:
2933 		result = 0;
2934 	}
2935 
2936 	if (result)
2937 		result |= HSO_INTF_BULK;
2938 
2939 	if (config_data[16] & 0x1)
2940 		result |= HSO_INFO_CRC_BUG;
2941 
2942 	return result;
2943 }
2944 
2945 /* called once for each interface upon device insertion */
2946 static int hso_probe(struct usb_interface *interface,
2947 		     const struct usb_device_id *id)
2948 {
2949 	int mux, i, if_num, port_spec;
2950 	unsigned char port_mask;
2951 	struct hso_device *hso_dev = NULL;
2952 	struct hso_shared_int *shared_int;
2953 	struct hso_device *tmp_dev = NULL;
2954 
2955 	if_num = interface->altsetting->desc.bInterfaceNumber;
2956 
2957 	/* Get the interface/port specification from either driver_info or from
2958 	 * the device itself */
2959 	if (id->driver_info)
2960 		port_spec = ((u32 *)(id->driver_info))[if_num];
2961 	else
2962 		port_spec = hso_get_config_data(interface);
2963 
2964 	if (interface->cur_altsetting->desc.bInterfaceClass != 0xFF) {
2965 		dev_err(&interface->dev, "Not our interface\n");
2966 		return -ENODEV;
2967 	}
2968 	/* Check if we need to switch to alt interfaces prior to port
2969 	 * configuration */
2970 	if (interface->num_altsetting > 1)
2971 		usb_set_interface(interface_to_usbdev(interface), if_num, 1);
2972 	interface->needs_remote_wakeup = 1;
2973 
2974 	/* Allocate new hso device(s) */
2975 	switch (port_spec & HSO_INTF_MASK) {
2976 	case HSO_INTF_MUX:
2977 		if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
2978 			/* Create the network device */
2979 			if (!disable_net) {
2980 				hso_dev = hso_create_net_device(interface,
2981 								port_spec);
2982 				if (!hso_dev)
2983 					goto exit;
2984 				tmp_dev = hso_dev;
2985 			}
2986 		}
2987 
2988 		if (hso_get_mux_ports(interface, &port_mask))
2989 			/* TODO: de-allocate everything */
2990 			goto exit;
2991 
2992 		shared_int = hso_create_shared_int(interface);
2993 		if (!shared_int)
2994 			goto exit;
2995 
2996 		for (i = 1, mux = 0; i < 0x100; i = i << 1, mux++) {
2997 			if (port_mask & i) {
2998 				hso_dev = hso_create_mux_serial_device(
2999 						interface, i, shared_int);
3000 				if (!hso_dev)
3001 					goto exit;
3002 			}
3003 		}
3004 
3005 		if (tmp_dev)
3006 			hso_dev = tmp_dev;
3007 		break;
3008 
3009 	case HSO_INTF_BULK:
3010 		/* It's a regular bulk interface */
3011 		if (((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) &&
3012 		    !disable_net)
3013 			hso_dev = hso_create_net_device(interface, port_spec);
3014 		else
3015 			hso_dev =
3016 			    hso_create_bulk_serial_device(interface, port_spec);
3017 		if (!hso_dev)
3018 			goto exit;
3019 		break;
3020 	default:
3021 		goto exit;
3022 	}
3023 
3024 	/* save our data pointer in this device */
3025 	usb_set_intfdata(interface, hso_dev);
3026 
3027 	/* done */
3028 	return 0;
3029 exit:
3030 	hso_free_interface(interface);
3031 	return -ENODEV;
3032 }
3033 
3034 /* device removed, cleaning up */
3035 static void hso_disconnect(struct usb_interface *interface)
3036 {
3037 	hso_free_interface(interface);
3038 
3039 	/* remove reference of our private data */
3040 	usb_set_intfdata(interface, NULL);
3041 }
3042 
3043 static void async_get_intf(struct work_struct *data)
3044 {
3045 	struct hso_device *hso_dev =
3046 	    container_of(data, struct hso_device, async_get_intf);
3047 	usb_autopm_get_interface(hso_dev->interface);
3048 }
3049 
3050 static void async_put_intf(struct work_struct *data)
3051 {
3052 	struct hso_device *hso_dev =
3053 	    container_of(data, struct hso_device, async_put_intf);
3054 	usb_autopm_put_interface(hso_dev->interface);
3055 }
3056 
3057 static int hso_get_activity(struct hso_device *hso_dev)
3058 {
3059 	if (hso_dev->usb->state == USB_STATE_SUSPENDED) {
3060 		if (!hso_dev->is_active) {
3061 			hso_dev->is_active = 1;
3062 			schedule_work(&hso_dev->async_get_intf);
3063 		}
3064 	}
3065 
3066 	if (hso_dev->usb->state != USB_STATE_CONFIGURED)
3067 		return -EAGAIN;
3068 
3069 	usb_mark_last_busy(hso_dev->usb);
3070 
3071 	return 0;
3072 }
3073 
3074 static int hso_put_activity(struct hso_device *hso_dev)
3075 {
3076 	if (hso_dev->usb->state != USB_STATE_SUSPENDED) {
3077 		if (hso_dev->is_active) {
3078 			hso_dev->is_active = 0;
3079 			schedule_work(&hso_dev->async_put_intf);
3080 			return -EAGAIN;
3081 		}
3082 	}
3083 	hso_dev->is_active = 0;
3084 	return 0;
3085 }
3086 
3087 /* called by kernel when we need to suspend device */
3088 static int hso_suspend(struct usb_interface *iface, pm_message_t message)
3089 {
3090 	int i, result;
3091 
3092 	/* Stop all serial ports */
3093 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
3094 		if (serial_table[i] && (serial_table[i]->interface == iface)) {
3095 			result = hso_stop_serial_device(serial_table[i]);
3096 			if (result)
3097 				goto out;
3098 		}
3099 	}
3100 
3101 	/* Stop all network ports */
3102 	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
3103 		if (network_table[i] &&
3104 		    (network_table[i]->interface == iface)) {
3105 			result = hso_stop_net_device(network_table[i]);
3106 			if (result)
3107 				goto out;
3108 		}
3109 	}
3110 
3111 out:
3112 	return 0;
3113 }
3114 
3115 /* called by kernel when we need to resume device */
3116 static int hso_resume(struct usb_interface *iface)
3117 {
3118 	int i, result = 0;
3119 	struct hso_net *hso_net;
3120 
3121 	/* Start all serial ports */
3122 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
3123 		if (serial_table[i] && (serial_table[i]->interface == iface)) {
3124 			if (dev2ser(serial_table[i])->open_count) {
3125 				result =
3126 				    hso_start_serial_device(serial_table[i], GFP_NOIO);
3127 				hso_kick_transmit(dev2ser(serial_table[i]));
3128 				if (result)
3129 					goto out;
3130 			}
3131 		}
3132 	}
3133 
3134 	/* Start all network ports */
3135 	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
3136 		if (network_table[i] &&
3137 		    (network_table[i]->interface == iface)) {
3138 			hso_net = dev2net(network_table[i]);
3139 			if (hso_net->flags & IFF_UP) {
3140 				/* First transmit any lingering data,
3141 				   then restart the device. */
3142 				if (hso_net->skb_tx_buf) {
3143 					dev_dbg(&iface->dev,
3144 						"Transmitting"
3145 						" lingering data\n");
3146 					hso_net_start_xmit(hso_net->skb_tx_buf,
3147 							   hso_net->net);
3148 					hso_net->skb_tx_buf = NULL;
3149 				}
3150 				result = hso_start_net_device(network_table[i]);
3151 				if (result)
3152 					goto out;
3153 			}
3154 		}
3155 	}
3156 
3157 out:
3158 	return result;
3159 }
3160 
3161 static void reset_device(struct work_struct *data)
3162 {
3163 	struct hso_device *hso_dev =
3164 	    container_of(data, struct hso_device, reset_device);
3165 	struct usb_device *usb = hso_dev->usb;
3166 	int result;
3167 
3168 	if (hso_dev->usb_gone) {
3169 		D1("No reset during disconnect\n");
3170 	} else {
3171 		result = usb_lock_device_for_reset(usb, hso_dev->interface);
3172 		if (result < 0)
3173 			D1("unable to lock device for reset: %d\n", result);
3174 		else {
3175 			usb_reset_device(usb);
3176 			usb_unlock_device(usb);
3177 		}
3178 	}
3179 }
3180 
3181 static void hso_serial_ref_free(struct kref *ref)
3182 {
3183 	struct hso_device *hso_dev = container_of(ref, struct hso_device, ref);
3184 
3185 	hso_free_serial_device(hso_dev);
3186 }
3187 
3188 static void hso_free_interface(struct usb_interface *interface)
3189 {
3190 	struct hso_serial *hso_dev;
3191 	struct tty_struct *tty;
3192 	int i;
3193 
3194 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
3195 		if (serial_table[i] &&
3196 		    (serial_table[i]->interface == interface)) {
3197 			hso_dev = dev2ser(serial_table[i]);
3198 			spin_lock_irq(&hso_dev->serial_lock);
3199 			tty = tty_kref_get(hso_dev->tty);
3200 			spin_unlock_irq(&hso_dev->serial_lock);
3201 			if (tty)
3202 				tty_hangup(tty);
3203 			mutex_lock(&hso_dev->parent->mutex);
3204 			tty_kref_put(tty);
3205 			hso_dev->parent->usb_gone = 1;
3206 			mutex_unlock(&hso_dev->parent->mutex);
3207 			kref_put(&serial_table[i]->ref, hso_serial_ref_free);
3208 		}
3209 	}
3210 
3211 	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
3212 		if (network_table[i] &&
3213 		    (network_table[i]->interface == interface)) {
3214 			struct rfkill *rfk = dev2net(network_table[i])->rfkill;
3215 			/* hso_stop_net_device doesn't stop the net queue since
3216 			 * traffic needs to start it again when suspended */
3217 			netif_stop_queue(dev2net(network_table[i])->net);
3218 			hso_stop_net_device(network_table[i]);
3219 			cancel_work_sync(&network_table[i]->async_put_intf);
3220 			cancel_work_sync(&network_table[i]->async_get_intf);
3221 			if (rfk) {
3222 				rfkill_unregister(rfk);
3223 				rfkill_destroy(rfk);
3224 			}
3225 			hso_free_net_device(network_table[i]);
3226 		}
3227 	}
3228 }
3229 
3230 /* Helper functions */
3231 
3232 /* Get the endpoint ! */
3233 static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
3234 						  int type, int dir)
3235 {
3236 	int i;
3237 	struct usb_host_interface *iface = intf->cur_altsetting;
3238 	struct usb_endpoint_descriptor *endp;
3239 
3240 	for (i = 0; i < iface->desc.bNumEndpoints; i++) {
3241 		endp = &iface->endpoint[i].desc;
3242 		if (((endp->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == dir) &&
3243 		    (usb_endpoint_type(endp) == type))
3244 			return endp;
3245 	}
3246 
3247 	return NULL;
3248 }
3249 
3250 /* Get the byte that describes which ports are enabled */
3251 static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports)
3252 {
3253 	int i;
3254 	struct usb_host_interface *iface = intf->cur_altsetting;
3255 
3256 	if (iface->extralen == 3) {
3257 		*ports = iface->extra[2];
3258 		return 0;
3259 	}
3260 
3261 	for (i = 0; i < iface->desc.bNumEndpoints; i++) {
3262 		if (iface->endpoint[i].extralen == 3) {
3263 			*ports = iface->endpoint[i].extra[2];
3264 			return 0;
3265 		}
3266 	}
3267 
3268 	return -1;
3269 }
3270 
3271 /* interrupt urb needs to be submitted, used for serial read of muxed port */
3272 static int hso_mux_submit_intr_urb(struct hso_shared_int *shared_int,
3273 				   struct usb_device *usb, gfp_t gfp)
3274 {
3275 	int result;
3276 
3277 	usb_fill_int_urb(shared_int->shared_intr_urb, usb,
3278 			 usb_rcvintpipe(usb,
3279 				shared_int->intr_endp->bEndpointAddress & 0x7F),
3280 			 shared_int->shared_intr_buf,
3281 			 1,
3282 			 intr_callback, shared_int,
3283 			 shared_int->intr_endp->bInterval);
3284 
3285 	result = usb_submit_urb(shared_int->shared_intr_urb, gfp);
3286 	if (result)
3287 		dev_warn(&usb->dev, "%s failed mux_intr_urb %d\n", __func__,
3288 			result);
3289 
3290 	return result;
3291 }
3292 
3293 /* operations setup of the serial interface */
3294 static const struct tty_operations hso_serial_ops = {
3295 	.open = hso_serial_open,
3296 	.close = hso_serial_close,
3297 	.write = hso_serial_write,
3298 	.write_room = hso_serial_write_room,
3299 	.ioctl = hso_serial_ioctl,
3300 	.set_termios = hso_serial_set_termios,
3301 	.chars_in_buffer = hso_serial_chars_in_buffer,
3302 	.tiocmget = hso_serial_tiocmget,
3303 	.tiocmset = hso_serial_tiocmset,
3304 	.unthrottle = hso_unthrottle
3305 };
3306 
3307 static struct usb_driver hso_driver = {
3308 	.name = driver_name,
3309 	.probe = hso_probe,
3310 	.disconnect = hso_disconnect,
3311 	.id_table = hso_ids,
3312 	.suspend = hso_suspend,
3313 	.resume = hso_resume,
3314 	.reset_resume = hso_resume,
3315 	.supports_autosuspend = 1,
3316 };
3317 
3318 static int __init hso_init(void)
3319 {
3320 	int i;
3321 	int result;
3322 
3323 	/* put it in the log */
3324 	printk(KERN_INFO "hso: %s\n", version);
3325 
3326 	/* Initialise the serial table semaphore and table */
3327 	spin_lock_init(&serial_table_lock);
3328 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++)
3329 		serial_table[i] = NULL;
3330 
3331 	/* allocate our driver using the proper amount of supported minors */
3332 	tty_drv = alloc_tty_driver(HSO_SERIAL_TTY_MINORS);
3333 	if (!tty_drv)
3334 		return -ENOMEM;
3335 
3336 	/* fill in all needed values */
3337 	tty_drv->magic = TTY_DRIVER_MAGIC;
3338 	tty_drv->owner = THIS_MODULE;
3339 	tty_drv->driver_name = driver_name;
3340 	tty_drv->name = tty_filename;
3341 
3342 	/* if major number is provided as parameter, use that one */
3343 	if (tty_major)
3344 		tty_drv->major = tty_major;
3345 
3346 	tty_drv->minor_start = 0;
3347 	tty_drv->num = HSO_SERIAL_TTY_MINORS;
3348 	tty_drv->type = TTY_DRIVER_TYPE_SERIAL;
3349 	tty_drv->subtype = SERIAL_TYPE_NORMAL;
3350 	tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
3351 	tty_drv->init_termios = tty_std_termios;
3352 	hso_init_termios(&tty_drv->init_termios);
3353 	tty_set_operations(tty_drv, &hso_serial_ops);
3354 
3355 	/* register the tty driver */
3356 	result = tty_register_driver(tty_drv);
3357 	if (result) {
3358 		printk(KERN_ERR "%s - tty_register_driver failed(%d)\n",
3359 			__func__, result);
3360 		return result;
3361 	}
3362 
3363 	/* register this module as an usb driver */
3364 	result = usb_register(&hso_driver);
3365 	if (result) {
3366 		printk(KERN_ERR "Could not register hso driver? error: %d\n",
3367 			result);
3368 		/* cleanup serial interface */
3369 		tty_unregister_driver(tty_drv);
3370 		return result;
3371 	}
3372 
3373 	/* done */
3374 	return 0;
3375 }
3376 
3377 static void __exit hso_exit(void)
3378 {
3379 	printk(KERN_INFO "hso: unloaded\n");
3380 
3381 	tty_unregister_driver(tty_drv);
3382 	/* deregister the usb driver */
3383 	usb_deregister(&hso_driver);
3384 }
3385 
3386 /* Module definitions */
3387 module_init(hso_init);
3388 module_exit(hso_exit);
3389 
3390 MODULE_AUTHOR(MOD_AUTHOR);
3391 MODULE_DESCRIPTION(MOD_DESCRIPTION);
3392 MODULE_LICENSE(MOD_LICENSE);
3393 MODULE_INFO(Version, DRIVER_VERSION);
3394 
3395 /* change the debug level (eg: insmod hso.ko debug=0x04) */
3396 MODULE_PARM_DESC(debug, "Level of debug [0x01 | 0x02 | 0x04 | 0x08 | 0x10]");
3397 module_param(debug, int, S_IRUGO | S_IWUSR);
3398 
3399 /* set the major tty number (eg: insmod hso.ko tty_major=245) */
3400 MODULE_PARM_DESC(tty_major, "Set the major tty number");
3401 module_param(tty_major, int, S_IRUGO | S_IWUSR);
3402 
3403 /* disable network interface (eg: insmod hso.ko disable_net=1) */
3404 MODULE_PARM_DESC(disable_net, "Disable the network interface");
3405 module_param(disable_net, int, S_IRUGO | S_IWUSR);
3406