xref: /openbmc/linux/drivers/net/usb/cdc_ether.c (revision 5bd8e16d)
1 /*
2  * CDC Ethernet based networking peripherals
3  * Copyright (C) 2003-2005 by David Brownell
4  * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or
9  * (at your option) any later version.
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  * GNU General Public License for more details.
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with this program; if not, write to the Free Software
18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
19  */
20 
21 // #define	DEBUG			// error path messages, extra info
22 // #define	VERBOSE			// more; success messages
23 
24 #include <linux/module.h>
25 #include <linux/init.h>
26 #include <linux/netdevice.h>
27 #include <linux/etherdevice.h>
28 #include <linux/ethtool.h>
29 #include <linux/workqueue.h>
30 #include <linux/mii.h>
31 #include <linux/usb.h>
32 #include <linux/usb/cdc.h>
33 #include <linux/usb/usbnet.h>
34 
35 
36 #if IS_ENABLED(CONFIG_USB_NET_RNDIS_HOST)
37 
38 static int is_rndis(struct usb_interface_descriptor *desc)
39 {
40 	return (desc->bInterfaceClass == USB_CLASS_COMM &&
41 		desc->bInterfaceSubClass == 2 &&
42 		desc->bInterfaceProtocol == 0xff);
43 }
44 
45 static int is_activesync(struct usb_interface_descriptor *desc)
46 {
47 	return (desc->bInterfaceClass == USB_CLASS_MISC &&
48 		desc->bInterfaceSubClass == 1 &&
49 		desc->bInterfaceProtocol == 1);
50 }
51 
52 static int is_wireless_rndis(struct usb_interface_descriptor *desc)
53 {
54 	return (desc->bInterfaceClass == USB_CLASS_WIRELESS_CONTROLLER &&
55 		desc->bInterfaceSubClass == 1 &&
56 		desc->bInterfaceProtocol == 3);
57 }
58 
59 #else
60 
61 #define is_rndis(desc)		0
62 #define is_activesync(desc)	0
63 #define is_wireless_rndis(desc)	0
64 
65 #endif
66 
67 static const u8 mbm_guid[16] = {
68 	0xa3, 0x17, 0xa8, 0x8b, 0x04, 0x5e, 0x4f, 0x01,
69 	0xa6, 0x07, 0xc0, 0xff, 0xcb, 0x7e, 0x39, 0x2a,
70 };
71 
72 /* probes control interface, claims data interface, collects the bulk
73  * endpoints, activates data interface (if needed), maybe sets MTU.
74  * all pure cdc, except for certain firmware workarounds, and knowing
75  * that rndis uses one different rule.
76  */
77 int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
78 {
79 	u8				*buf = intf->cur_altsetting->extra;
80 	int				len = intf->cur_altsetting->extralen;
81 	struct usb_interface_descriptor	*d;
82 	struct cdc_state		*info = (void *) &dev->data;
83 	int				status;
84 	int				rndis;
85 	bool				android_rndis_quirk = false;
86 	struct usb_driver		*driver = driver_of(intf);
87 	struct usb_cdc_mdlm_desc	*desc = NULL;
88 	struct usb_cdc_mdlm_detail_desc *detail = NULL;
89 
90 	if (sizeof(dev->data) < sizeof(*info))
91 		return -EDOM;
92 
93 	/* expect strict spec conformance for the descriptors, but
94 	 * cope with firmware which stores them in the wrong place
95 	 */
96 	if (len == 0 && dev->udev->actconfig->extralen) {
97 		/* Motorola SB4100 (and others: Brad Hards says it's
98 		 * from a Broadcom design) put CDC descriptors here
99 		 */
100 		buf = dev->udev->actconfig->extra;
101 		len = dev->udev->actconfig->extralen;
102 		dev_dbg(&intf->dev, "CDC descriptors on config\n");
103 	}
104 
105 	/* Maybe CDC descriptors are after the endpoint?  This bug has
106 	 * been seen on some 2Wire Inc RNDIS-ish products.
107 	 */
108 	if (len == 0) {
109 		struct usb_host_endpoint	*hep;
110 
111 		hep = intf->cur_altsetting->endpoint;
112 		if (hep) {
113 			buf = hep->extra;
114 			len = hep->extralen;
115 		}
116 		if (len)
117 			dev_dbg(&intf->dev,
118 				"CDC descriptors on endpoint\n");
119 	}
120 
121 	/* this assumes that if there's a non-RNDIS vendor variant
122 	 * of cdc-acm, it'll fail RNDIS requests cleanly.
123 	 */
124 	rndis = (is_rndis(&intf->cur_altsetting->desc) ||
125 		 is_activesync(&intf->cur_altsetting->desc) ||
126 		 is_wireless_rndis(&intf->cur_altsetting->desc));
127 
128 	memset(info, 0, sizeof(*info));
129 	info->control = intf;
130 	while (len > 3) {
131 		if (buf[1] != USB_DT_CS_INTERFACE)
132 			goto next_desc;
133 
134 		/* use bDescriptorSubType to identify the CDC descriptors.
135 		 * We expect devices with CDC header and union descriptors.
136 		 * For CDC Ethernet we need the ethernet descriptor.
137 		 * For RNDIS, ignore two (pointless) CDC modem descriptors
138 		 * in favor of a complicated OID-based RPC scheme doing what
139 		 * CDC Ethernet achieves with a simple descriptor.
140 		 */
141 		switch (buf[2]) {
142 		case USB_CDC_HEADER_TYPE:
143 			if (info->header) {
144 				dev_dbg(&intf->dev, "extra CDC header\n");
145 				goto bad_desc;
146 			}
147 			info->header = (void *) buf;
148 			if (info->header->bLength != sizeof(*info->header)) {
149 				dev_dbg(&intf->dev, "CDC header len %u\n",
150 					info->header->bLength);
151 				goto bad_desc;
152 			}
153 			break;
154 		case USB_CDC_ACM_TYPE:
155 			/* paranoia:  disambiguate a "real" vendor-specific
156 			 * modem interface from an RNDIS non-modem.
157 			 */
158 			if (rndis) {
159 				struct usb_cdc_acm_descriptor *acm;
160 
161 				acm = (void *) buf;
162 				if (acm->bmCapabilities) {
163 					dev_dbg(&intf->dev,
164 						"ACM capabilities %02x, "
165 						"not really RNDIS?\n",
166 						acm->bmCapabilities);
167 					goto bad_desc;
168 				}
169 			}
170 			break;
171 		case USB_CDC_UNION_TYPE:
172 			if (info->u) {
173 				dev_dbg(&intf->dev, "extra CDC union\n");
174 				goto bad_desc;
175 			}
176 			info->u = (void *) buf;
177 			if (info->u->bLength != sizeof(*info->u)) {
178 				dev_dbg(&intf->dev, "CDC union len %u\n",
179 					info->u->bLength);
180 				goto bad_desc;
181 			}
182 
183 			/* we need a master/control interface (what we're
184 			 * probed with) and a slave/data interface; union
185 			 * descriptors sort this all out.
186 			 */
187 			info->control = usb_ifnum_to_if(dev->udev,
188 						info->u->bMasterInterface0);
189 			info->data = usb_ifnum_to_if(dev->udev,
190 						info->u->bSlaveInterface0);
191 			if (!info->control || !info->data) {
192 				dev_dbg(&intf->dev,
193 					"master #%u/%p slave #%u/%p\n",
194 					info->u->bMasterInterface0,
195 					info->control,
196 					info->u->bSlaveInterface0,
197 					info->data);
198 				/* fall back to hard-wiring for RNDIS */
199 				if (rndis) {
200 					android_rndis_quirk = true;
201 					goto next_desc;
202 				}
203 				goto bad_desc;
204 			}
205 			if (info->control != intf) {
206 				dev_dbg(&intf->dev, "bogus CDC Union\n");
207 				/* Ambit USB Cable Modem (and maybe others)
208 				 * interchanges master and slave interface.
209 				 */
210 				if (info->data == intf) {
211 					info->data = info->control;
212 					info->control = intf;
213 				} else
214 					goto bad_desc;
215 			}
216 
217 			/* some devices merge these - skip class check */
218 			if (info->control == info->data)
219 				goto next_desc;
220 
221 			/* a data interface altsetting does the real i/o */
222 			d = &info->data->cur_altsetting->desc;
223 			if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
224 				dev_dbg(&intf->dev, "slave class %u\n",
225 					d->bInterfaceClass);
226 				goto bad_desc;
227 			}
228 			break;
229 		case USB_CDC_ETHERNET_TYPE:
230 			if (info->ether) {
231 				dev_dbg(&intf->dev, "extra CDC ether\n");
232 				goto bad_desc;
233 			}
234 			info->ether = (void *) buf;
235 			if (info->ether->bLength != sizeof(*info->ether)) {
236 				dev_dbg(&intf->dev, "CDC ether len %u\n",
237 					info->ether->bLength);
238 				goto bad_desc;
239 			}
240 			dev->hard_mtu = le16_to_cpu(
241 						info->ether->wMaxSegmentSize);
242 			/* because of Zaurus, we may be ignoring the host
243 			 * side link address we were given.
244 			 */
245 			break;
246 		case USB_CDC_MDLM_TYPE:
247 			if (desc) {
248 				dev_dbg(&intf->dev, "extra MDLM descriptor\n");
249 				goto bad_desc;
250 			}
251 
252 			desc = (void *)buf;
253 
254 			if (desc->bLength != sizeof(*desc))
255 				goto bad_desc;
256 
257 			if (memcmp(&desc->bGUID, mbm_guid, 16))
258 				goto bad_desc;
259 			break;
260 		case USB_CDC_MDLM_DETAIL_TYPE:
261 			if (detail) {
262 				dev_dbg(&intf->dev, "extra MDLM detail descriptor\n");
263 				goto bad_desc;
264 			}
265 
266 			detail = (void *)buf;
267 
268 			if (detail->bGuidDescriptorType == 0) {
269 				if (detail->bLength < (sizeof(*detail) + 1))
270 					goto bad_desc;
271 			} else
272 				goto bad_desc;
273 			break;
274 		}
275 next_desc:
276 		len -= buf[0];	/* bLength */
277 		buf += buf[0];
278 	}
279 
280 	/* Microsoft ActiveSync based and some regular RNDIS devices lack the
281 	 * CDC descriptors, so we'll hard-wire the interfaces and not check
282 	 * for descriptors.
283 	 *
284 	 * Some Android RNDIS devices have a CDC Union descriptor pointing
285 	 * to non-existing interfaces.  Ignore that and attempt the same
286 	 * hard-wired 0 and 1 interfaces.
287 	 */
288 	if (rndis && (!info->u || android_rndis_quirk)) {
289 		info->control = usb_ifnum_to_if(dev->udev, 0);
290 		info->data = usb_ifnum_to_if(dev->udev, 1);
291 		if (!info->control || !info->data || info->control != intf) {
292 			dev_dbg(&intf->dev,
293 				"rndis: master #0/%p slave #1/%p\n",
294 				info->control,
295 				info->data);
296 			goto bad_desc;
297 		}
298 
299 	} else if (!info->header || !info->u || (!rndis && !info->ether)) {
300 		dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n",
301 			info->header ? "" : "header ",
302 			info->u ? "" : "union ",
303 			info->ether ? "" : "ether ");
304 		goto bad_desc;
305 	}
306 
307 	/* claim data interface and set it up ... with side effects.
308 	 * network traffic can't flow until an altsetting is enabled.
309 	 */
310 	if (info->data != info->control) {
311 		status = usb_driver_claim_interface(driver, info->data, dev);
312 		if (status < 0)
313 			return status;
314 	}
315 	status = usbnet_get_endpoints(dev, info->data);
316 	if (status < 0) {
317 		/* ensure immediate exit from usbnet_disconnect */
318 		usb_set_intfdata(info->data, NULL);
319 		if (info->data != info->control)
320 			usb_driver_release_interface(driver, info->data);
321 		return status;
322 	}
323 
324 	/* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
325 	if (info->data != info->control)
326 		dev->status = NULL;
327 	if (info->control->cur_altsetting->desc.bNumEndpoints == 1) {
328 		struct usb_endpoint_descriptor	*desc;
329 
330 		dev->status = &info->control->cur_altsetting->endpoint [0];
331 		desc = &dev->status->desc;
332 		if (!usb_endpoint_is_int_in(desc) ||
333 		    (le16_to_cpu(desc->wMaxPacketSize)
334 		     < sizeof(struct usb_cdc_notification)) ||
335 		    !desc->bInterval) {
336 			dev_dbg(&intf->dev, "bad notification endpoint\n");
337 			dev->status = NULL;
338 		}
339 	}
340 	if (rndis && !dev->status) {
341 		dev_dbg(&intf->dev, "missing RNDIS status endpoint\n");
342 		usb_set_intfdata(info->data, NULL);
343 		usb_driver_release_interface(driver, info->data);
344 		return -ENODEV;
345 	}
346 	return 0;
347 
348 bad_desc:
349 	dev_info(&dev->udev->dev, "bad CDC descriptors\n");
350 	return -ENODEV;
351 }
352 EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
353 
354 void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf)
355 {
356 	struct cdc_state		*info = (void *) &dev->data;
357 	struct usb_driver		*driver = driver_of(intf);
358 
359 	/* combined interface - nothing  to do */
360 	if (info->data == info->control)
361 		return;
362 
363 	/* disconnect master --> disconnect slave */
364 	if (intf == info->control && info->data) {
365 		/* ensure immediate exit from usbnet_disconnect */
366 		usb_set_intfdata(info->data, NULL);
367 		usb_driver_release_interface(driver, info->data);
368 		info->data = NULL;
369 	}
370 
371 	/* and vice versa (just in case) */
372 	else if (intf == info->data && info->control) {
373 		/* ensure immediate exit from usbnet_disconnect */
374 		usb_set_intfdata(info->control, NULL);
375 		usb_driver_release_interface(driver, info->control);
376 		info->control = NULL;
377 	}
378 }
379 EXPORT_SYMBOL_GPL(usbnet_cdc_unbind);
380 
381 /* Communications Device Class, Ethernet Control model
382  *
383  * Takes two interfaces.  The DATA interface is inactive till an altsetting
384  * is selected.  Configuration data includes class descriptors.  There's
385  * an optional status endpoint on the control interface.
386  *
387  * This should interop with whatever the 2.4 "CDCEther.c" driver
388  * (by Brad Hards) talked with, with more functionality.
389  */
390 
391 static void dumpspeed(struct usbnet *dev, __le32 *speeds)
392 {
393 	netif_info(dev, timer, dev->net,
394 		   "link speeds: %u kbps up, %u kbps down\n",
395 		   __le32_to_cpu(speeds[0]) / 1000,
396 		   __le32_to_cpu(speeds[1]) / 1000);
397 }
398 
399 void usbnet_cdc_status(struct usbnet *dev, struct urb *urb)
400 {
401 	struct usb_cdc_notification	*event;
402 
403 	if (urb->actual_length < sizeof(*event))
404 		return;
405 
406 	/* SPEED_CHANGE can get split into two 8-byte packets */
407 	if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) {
408 		dumpspeed(dev, (__le32 *) urb->transfer_buffer);
409 		return;
410 	}
411 
412 	event = urb->transfer_buffer;
413 	switch (event->bNotificationType) {
414 	case USB_CDC_NOTIFY_NETWORK_CONNECTION:
415 		netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n",
416 			  event->wValue ? "on" : "off");
417 		usbnet_link_change(dev, !!event->wValue, 0);
418 		break;
419 	case USB_CDC_NOTIFY_SPEED_CHANGE:	/* tx/rx rates */
420 		netif_dbg(dev, timer, dev->net, "CDC: speed change (len %d)\n",
421 			  urb->actual_length);
422 		if (urb->actual_length != (sizeof(*event) + 8))
423 			set_bit(EVENT_STS_SPLIT, &dev->flags);
424 		else
425 			dumpspeed(dev, (__le32 *) &event[1]);
426 		break;
427 	/* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS),
428 	 * but there are no standard formats for the response data.
429 	 */
430 	default:
431 		netdev_err(dev->net, "CDC: unexpected notification %02x!\n",
432 			   event->bNotificationType);
433 		break;
434 	}
435 }
436 EXPORT_SYMBOL_GPL(usbnet_cdc_status);
437 
438 int usbnet_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
439 {
440 	int				status;
441 	struct cdc_state		*info = (void *) &dev->data;
442 
443 	BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data)
444 			< sizeof(struct cdc_state)));
445 
446 	status = usbnet_generic_cdc_bind(dev, intf);
447 	if (status < 0)
448 		return status;
449 
450 	status = usbnet_get_ethernet_addr(dev, info->ether->iMACAddress);
451 	if (status < 0) {
452 		usb_set_intfdata(info->data, NULL);
453 		usb_driver_release_interface(driver_of(intf), info->data);
454 		return status;
455 	}
456 
457 	/* FIXME cdc-ether has some multicast code too, though it complains
458 	 * in routine cases.  info->ether describes the multicast support.
459 	 * Implement that here, manipulating the cdc filter as needed.
460 	 */
461 	return 0;
462 }
463 EXPORT_SYMBOL_GPL(usbnet_cdc_bind);
464 
465 static const struct driver_info	cdc_info = {
466 	.description =	"CDC Ethernet Device",
467 	.flags =	FLAG_ETHER | FLAG_POINTTOPOINT,
468 	.bind =		usbnet_cdc_bind,
469 	.unbind =	usbnet_cdc_unbind,
470 	.status =	usbnet_cdc_status,
471 	.manage_power =	usbnet_manage_power,
472 };
473 
474 static const struct driver_info wwan_info = {
475 	.description =	"Mobile Broadband Network Device",
476 	.flags =	FLAG_WWAN,
477 	.bind =		usbnet_cdc_bind,
478 	.unbind =	usbnet_cdc_unbind,
479 	.status =	usbnet_cdc_status,
480 	.manage_power =	usbnet_manage_power,
481 };
482 
483 /*-------------------------------------------------------------------------*/
484 
485 #define HUAWEI_VENDOR_ID	0x12D1
486 #define NOVATEL_VENDOR_ID	0x1410
487 #define ZTE_VENDOR_ID		0x19D2
488 #define DELL_VENDOR_ID		0x413C
489 #define REALTEK_VENDOR_ID	0x0bda
490 
491 static const struct usb_device_id	products[] = {
492 /* BLACKLIST !!
493  *
494  * First blacklist any products that are egregiously nonconformant
495  * with the CDC Ethernet specs.  Minor braindamage we cope with; when
496  * they're not even trying, needing a separate driver is only the first
497  * of the differences to show up.
498  */
499 
500 #define	ZAURUS_MASTER_INTERFACE \
501 	.bInterfaceClass	= USB_CLASS_COMM, \
502 	.bInterfaceSubClass	= USB_CDC_SUBCLASS_ETHERNET, \
503 	.bInterfaceProtocol	= USB_CDC_PROTO_NONE
504 
505 /* SA-1100 based Sharp Zaurus ("collie"), or compatible;
506  * wire-incompatible with true CDC Ethernet implementations.
507  * (And, it seems, needlessly so...)
508  */
509 {
510 	.match_flags	=   USB_DEVICE_ID_MATCH_INT_INFO
511 			  | USB_DEVICE_ID_MATCH_DEVICE,
512 	.idVendor		= 0x04DD,
513 	.idProduct		= 0x8004,
514 	ZAURUS_MASTER_INTERFACE,
515 	.driver_info		= 0,
516 },
517 
518 /* PXA-25x based Sharp Zaurii.  Note that it seems some of these
519  * (later models especially) may have shipped only with firmware
520  * advertising false "CDC MDLM" compatibility ... but we're not
521  * clear which models did that, so for now let's assume the worst.
522  */
523 {
524 	.match_flags	=   USB_DEVICE_ID_MATCH_INT_INFO
525 			  | USB_DEVICE_ID_MATCH_DEVICE,
526 	.idVendor		= 0x04DD,
527 	.idProduct		= 0x8005,	/* A-300 */
528 	ZAURUS_MASTER_INTERFACE,
529 	.driver_info		= 0,
530 }, {
531 	.match_flags	=   USB_DEVICE_ID_MATCH_INT_INFO
532 			  | USB_DEVICE_ID_MATCH_DEVICE,
533 	.idVendor		= 0x04DD,
534 	.idProduct		= 0x8006,	/* B-500/SL-5600 */
535 	ZAURUS_MASTER_INTERFACE,
536 	.driver_info		= 0,
537 }, {
538 	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
539 			  | USB_DEVICE_ID_MATCH_DEVICE,
540 	.idVendor		= 0x04DD,
541 	.idProduct		= 0x8007,	/* C-700 */
542 	ZAURUS_MASTER_INTERFACE,
543 	.driver_info		= 0,
544 }, {
545 	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
546 		 | USB_DEVICE_ID_MATCH_DEVICE,
547 	.idVendor               = 0x04DD,
548 	.idProduct              = 0x9031,	/* C-750 C-760 */
549 	ZAURUS_MASTER_INTERFACE,
550 	.driver_info		= 0,
551 }, {
552 	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
553 		 | USB_DEVICE_ID_MATCH_DEVICE,
554 	.idVendor               = 0x04DD,
555 	.idProduct              = 0x9032,	/* SL-6000 */
556 	ZAURUS_MASTER_INTERFACE,
557 	.driver_info		= 0,
558 }, {
559 	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
560 		 | USB_DEVICE_ID_MATCH_DEVICE,
561 	.idVendor               = 0x04DD,
562 	/* reported with some C860 units */
563 	.idProduct              = 0x9050,	/* C-860 */
564 	ZAURUS_MASTER_INTERFACE,
565 	.driver_info		= 0,
566 },
567 
568 /* Olympus has some models with a Zaurus-compatible option.
569  * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
570  */
571 {
572 	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
573 		 | USB_DEVICE_ID_MATCH_DEVICE,
574 	.idVendor               = 0x07B4,
575 	.idProduct              = 0x0F02,	/* R-1000 */
576 	ZAURUS_MASTER_INTERFACE,
577 	.driver_info		= 0,
578 },
579 
580 /* LG Electronics VL600 wants additional headers on every frame */
581 {
582 	USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
583 			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
584 	.driver_info = 0,
585 },
586 
587 /* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
588 {
589 	USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
590 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
591 	.driver_info		= 0,
592 },
593 
594 /* Novatel USB551L and MC551 - handled by qmi_wwan */
595 {
596 	USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0xB001, USB_CLASS_COMM,
597 			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
598 	.driver_info = 0,
599 },
600 
601 /* Novatel E362 - handled by qmi_wwan */
602 {
603 	USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9010, USB_CLASS_COMM,
604 			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
605 	.driver_info = 0,
606 },
607 
608 /* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
609 {
610 	USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8195, USB_CLASS_COMM,
611 			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
612 	.driver_info = 0,
613 },
614 
615 /* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
616 {
617 	USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8196, USB_CLASS_COMM,
618 			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
619 	.driver_info = 0,
620 },
621 
622 /* Dell Wireless 5804 (Novatel E371) - handled by qmi_wwan */
623 {
624 	USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x819b, USB_CLASS_COMM,
625 			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
626 	.driver_info = 0,
627 },
628 
629 /* AnyDATA ADU960S - handled by qmi_wwan */
630 {
631 	USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a, USB_CLASS_COMM,
632 			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
633 	.driver_info = 0,
634 },
635 
636 /* Huawei E1820 - handled by qmi_wwan */
637 {
638 	USB_DEVICE_INTERFACE_NUMBER(HUAWEI_VENDOR_ID, 0x14ac, 1),
639 	.driver_info = 0,
640 },
641 
642 /* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */
643 {
644 	USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM,
645 			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
646 	.driver_info = 0,
647 },
648 
649 /* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */
650 {
651 	USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM,
652 			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
653 	.driver_info = 0,
654 },
655 
656 /* WHITELIST!!!
657  *
658  * CDC Ether uses two interfaces, not necessarily consecutive.
659  * We match the main interface, ignoring the optional device
660  * class so we could handle devices that aren't exclusively
661  * CDC ether.
662  *
663  * NOTE:  this match must come AFTER entries blacklisting devices
664  * because of bugs/quirks in a given product (like Zaurus, above).
665  */
666 {
667 	/* ZTE (Vodafone) K3805-Z */
668 	USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1003, USB_CLASS_COMM,
669 				      USB_CDC_SUBCLASS_ETHERNET,
670 				      USB_CDC_PROTO_NONE),
671 	.driver_info = (unsigned long)&wwan_info,
672 }, {
673 	/* ZTE (Vodafone) K3806-Z */
674 	USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1015, USB_CLASS_COMM,
675 				      USB_CDC_SUBCLASS_ETHERNET,
676 				      USB_CDC_PROTO_NONE),
677 	.driver_info = (unsigned long)&wwan_info,
678 }, {
679 	/* ZTE (Vodafone) K4510-Z */
680 	USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1173, USB_CLASS_COMM,
681 				      USB_CDC_SUBCLASS_ETHERNET,
682 				      USB_CDC_PROTO_NONE),
683 	.driver_info = (unsigned long)&wwan_info,
684 }, {
685 	/* ZTE (Vodafone) K3770-Z */
686 	USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1177, USB_CLASS_COMM,
687 				      USB_CDC_SUBCLASS_ETHERNET,
688 				      USB_CDC_PROTO_NONE),
689 	.driver_info = (unsigned long)&wwan_info,
690 }, {
691 	/* ZTE (Vodafone) K3772-Z */
692 	USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1181, USB_CLASS_COMM,
693 				      USB_CDC_SUBCLASS_ETHERNET,
694 				      USB_CDC_PROTO_NONE),
695 	.driver_info = (unsigned long)&wwan_info,
696 }, {
697 	/* Telit modules */
698 	USB_VENDOR_AND_INTERFACE_INFO(0x1bc7, USB_CLASS_COMM,
699 			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
700 	.driver_info = (kernel_ulong_t) &wwan_info,
701 }, {
702 	USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
703 			USB_CDC_PROTO_NONE),
704 	.driver_info = (unsigned long) &cdc_info,
705 }, {
706 	USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
707 			USB_CDC_PROTO_NONE),
708 	.driver_info = (unsigned long)&wwan_info,
709 
710 }, {
711 	/* Various Huawei modems with a network port like the UMG1831 */
712 	USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_COMM,
713 				      USB_CDC_SUBCLASS_ETHERNET, 255),
714 	.driver_info = (unsigned long)&wwan_info,
715 },
716 	{ },		/* END */
717 };
718 MODULE_DEVICE_TABLE(usb, products);
719 
720 static struct usb_driver cdc_driver = {
721 	.name =		"cdc_ether",
722 	.id_table =	products,
723 	.probe =	usbnet_probe,
724 	.disconnect =	usbnet_disconnect,
725 	.suspend =	usbnet_suspend,
726 	.resume =	usbnet_resume,
727 	.reset_resume =	usbnet_resume,
728 	.supports_autosuspend = 1,
729 	.disable_hub_initiated_lpm = 1,
730 };
731 
732 module_usb_driver(cdc_driver);
733 
734 MODULE_AUTHOR("David Brownell");
735 MODULE_DESCRIPTION("USB CDC Ethernet devices");
736 MODULE_LICENSE("GPL");
737