1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * ASIX AX88172A based USB 2.0 Ethernet Devices 4 * Copyright (C) 2012 OMICRON electronics GmbH 5 * 6 * Supports external PHYs via phylib. Based on the driver for the 7 * AX88772. Original copyrights follow: 8 * 9 * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com> 10 * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net> 11 * Copyright (C) 2006 James Painter <jamie.painter@iname.com> 12 * Copyright (c) 2002-2003 TiVo Inc. 13 */ 14 15 #include "asix.h" 16 #include <linux/phy.h> 17 18 struct ax88172a_private { 19 struct mii_bus *mdio; 20 struct phy_device *phydev; 21 char phy_name[20]; 22 u16 phy_addr; 23 u16 oldmode; 24 int use_embdphy; 25 struct asix_rx_fixup_info rx_fixup_info; 26 }; 27 28 /* MDIO read and write wrappers for phylib */ 29 static int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum) 30 { 31 return asix_mdio_read(((struct usbnet *)bus->priv)->net, phy_id, 32 regnum); 33 } 34 35 static int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum, 36 u16 val) 37 { 38 asix_mdio_write(((struct usbnet *)bus->priv)->net, phy_id, regnum, val); 39 return 0; 40 } 41 42 /* set MAC link settings according to information from phylib */ 43 static void ax88172a_adjust_link(struct net_device *netdev) 44 { 45 struct phy_device *phydev = netdev->phydev; 46 struct usbnet *dev = netdev_priv(netdev); 47 struct ax88172a_private *priv = dev->driver_priv; 48 u16 mode = 0; 49 50 if (phydev->link) { 51 mode = AX88772_MEDIUM_DEFAULT; 52 53 if (phydev->duplex == DUPLEX_HALF) 54 mode &= ~AX_MEDIUM_FD; 55 56 if (phydev->speed != SPEED_100) 57 mode &= ~AX_MEDIUM_PS; 58 } 59 60 if (mode != priv->oldmode) { 61 asix_write_medium_mode(dev, mode, 0); 62 priv->oldmode = mode; 63 netdev_dbg(netdev, "speed %u duplex %d, setting mode to 0x%04x\n", 64 phydev->speed, phydev->duplex, mode); 65 phy_print_status(phydev); 66 } 67 } 68 69 static void ax88172a_status(struct usbnet *dev, struct urb *urb) 70 { 71 /* link changes are detected by polling the phy */ 72 } 73 74 /* use phylib infrastructure */ 75 static int ax88172a_init_mdio(struct usbnet *dev) 76 { 77 struct ax88172a_private *priv = dev->driver_priv; 78 int ret; 79 80 priv->mdio = mdiobus_alloc(); 81 if (!priv->mdio) { 82 netdev_err(dev->net, "Could not allocate MDIO bus\n"); 83 return -ENOMEM; 84 } 85 86 priv->mdio->priv = (void *)dev; 87 priv->mdio->read = &asix_mdio_bus_read; 88 priv->mdio->write = &asix_mdio_bus_write; 89 priv->mdio->name = "Asix MDIO Bus"; 90 /* mii bus name is usb-<usb bus number>-<usb device number> */ 91 snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d", 92 dev->udev->bus->busnum, dev->udev->devnum); 93 94 ret = mdiobus_register(priv->mdio); 95 if (ret) { 96 netdev_err(dev->net, "Could not register MDIO bus\n"); 97 goto mfree; 98 } 99 100 netdev_info(dev->net, "registered mdio bus %s\n", priv->mdio->id); 101 return 0; 102 103 mfree: 104 mdiobus_free(priv->mdio); 105 return ret; 106 } 107 108 static void ax88172a_remove_mdio(struct usbnet *dev) 109 { 110 struct ax88172a_private *priv = dev->driver_priv; 111 112 netdev_info(dev->net, "deregistering mdio bus %s\n", priv->mdio->id); 113 mdiobus_unregister(priv->mdio); 114 mdiobus_free(priv->mdio); 115 } 116 117 static const struct net_device_ops ax88172a_netdev_ops = { 118 .ndo_open = usbnet_open, 119 .ndo_stop = usbnet_stop, 120 .ndo_start_xmit = usbnet_start_xmit, 121 .ndo_tx_timeout = usbnet_tx_timeout, 122 .ndo_change_mtu = usbnet_change_mtu, 123 .ndo_get_stats64 = dev_get_tstats64, 124 .ndo_set_mac_address = asix_set_mac_address, 125 .ndo_validate_addr = eth_validate_addr, 126 .ndo_do_ioctl = phy_do_ioctl_running, 127 .ndo_set_rx_mode = asix_set_multicast, 128 }; 129 130 static const struct ethtool_ops ax88172a_ethtool_ops = { 131 .get_drvinfo = asix_get_drvinfo, 132 .get_link = usbnet_get_link, 133 .get_msglevel = usbnet_get_msglevel, 134 .set_msglevel = usbnet_set_msglevel, 135 .get_wol = asix_get_wol, 136 .set_wol = asix_set_wol, 137 .get_eeprom_len = asix_get_eeprom_len, 138 .get_eeprom = asix_get_eeprom, 139 .set_eeprom = asix_set_eeprom, 140 .nway_reset = phy_ethtool_nway_reset, 141 .get_link_ksettings = phy_ethtool_get_link_ksettings, 142 .set_link_ksettings = phy_ethtool_set_link_ksettings, 143 }; 144 145 static int ax88172a_reset_phy(struct usbnet *dev, int embd_phy) 146 { 147 int ret; 148 149 ret = asix_sw_reset(dev, AX_SWRESET_IPPD, 0); 150 if (ret < 0) 151 goto err; 152 153 msleep(150); 154 ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, 0); 155 if (ret < 0) 156 goto err; 157 158 msleep(150); 159 160 ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_IPPD, 161 0); 162 if (ret < 0) 163 goto err; 164 165 return 0; 166 167 err: 168 return ret; 169 } 170 171 172 static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf) 173 { 174 int ret; 175 u8 buf[ETH_ALEN]; 176 struct ax88172a_private *priv; 177 178 usbnet_get_endpoints(dev, intf); 179 180 priv = kzalloc(sizeof(*priv), GFP_KERNEL); 181 if (!priv) 182 return -ENOMEM; 183 184 dev->driver_priv = priv; 185 186 /* Get the MAC address */ 187 ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0); 188 if (ret < ETH_ALEN) { 189 netdev_err(dev->net, "Failed to read MAC address: %d\n", ret); 190 ret = -EIO; 191 goto free; 192 } 193 memcpy(dev->net->dev_addr, buf, ETH_ALEN); 194 195 dev->net->netdev_ops = &ax88172a_netdev_ops; 196 dev->net->ethtool_ops = &ax88172a_ethtool_ops; 197 198 /* are we using the internal or the external phy? */ 199 ret = asix_read_cmd(dev, AX_CMD_SW_PHY_STATUS, 0, 0, 1, buf, 0); 200 if (ret < 0) { 201 netdev_err(dev->net, "Failed to read software interface selection register: %d\n", 202 ret); 203 goto free; 204 } 205 206 netdev_dbg(dev->net, "AX_CMD_SW_PHY_STATUS = 0x%02x\n", buf[0]); 207 switch (buf[0] & AX_PHY_SELECT_MASK) { 208 case AX_PHY_SELECT_INTERNAL: 209 netdev_dbg(dev->net, "use internal phy\n"); 210 priv->use_embdphy = 1; 211 break; 212 case AX_PHY_SELECT_EXTERNAL: 213 netdev_dbg(dev->net, "use external phy\n"); 214 priv->use_embdphy = 0; 215 break; 216 default: 217 netdev_err(dev->net, "Interface mode not supported by driver\n"); 218 ret = -ENOTSUPP; 219 goto free; 220 } 221 222 priv->phy_addr = asix_read_phy_addr(dev, priv->use_embdphy); 223 ax88172a_reset_phy(dev, priv->use_embdphy); 224 225 /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */ 226 if (dev->driver_info->flags & FLAG_FRAMING_AX) { 227 /* hard_mtu is still the default - the device does not support 228 jumbo eth frames */ 229 dev->rx_urb_size = 2048; 230 } 231 232 /* init MDIO bus */ 233 ret = ax88172a_init_mdio(dev); 234 if (ret) 235 goto free; 236 237 return 0; 238 239 free: 240 kfree(priv); 241 return ret; 242 } 243 244 static int ax88172a_stop(struct usbnet *dev) 245 { 246 struct ax88172a_private *priv = dev->driver_priv; 247 248 netdev_dbg(dev->net, "Stopping interface\n"); 249 250 if (priv->phydev) { 251 netdev_info(dev->net, "Disconnecting from phy %s\n", 252 priv->phy_name); 253 phy_stop(priv->phydev); 254 phy_disconnect(priv->phydev); 255 } 256 257 return 0; 258 } 259 260 static void ax88172a_unbind(struct usbnet *dev, struct usb_interface *intf) 261 { 262 struct ax88172a_private *priv = dev->driver_priv; 263 264 ax88172a_remove_mdio(dev); 265 kfree(priv); 266 } 267 268 static int ax88172a_reset(struct usbnet *dev) 269 { 270 struct asix_data *data = (struct asix_data *)&dev->data; 271 struct ax88172a_private *priv = dev->driver_priv; 272 int ret; 273 u16 rx_ctl; 274 275 ax88172a_reset_phy(dev, priv->use_embdphy); 276 277 msleep(150); 278 rx_ctl = asix_read_rx_ctl(dev, 0); 279 netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl); 280 ret = asix_write_rx_ctl(dev, 0x0000, 0); 281 if (ret < 0) 282 goto out; 283 284 rx_ctl = asix_read_rx_ctl(dev, 0); 285 netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl); 286 287 msleep(150); 288 289 ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0, 290 AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT, 291 AX88772_IPG2_DEFAULT, 0, NULL, 0); 292 if (ret < 0) { 293 netdev_err(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret); 294 goto out; 295 } 296 297 /* Rewrite MAC address */ 298 memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN); 299 ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, 300 data->mac_addr, 0); 301 if (ret < 0) 302 goto out; 303 304 /* Set RX_CTL to default values with 2k buffer, and enable cactus */ 305 ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0); 306 if (ret < 0) 307 goto out; 308 309 rx_ctl = asix_read_rx_ctl(dev, 0); 310 netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n", 311 rx_ctl); 312 313 rx_ctl = asix_read_medium_status(dev, 0); 314 netdev_dbg(dev->net, "Medium Status is 0x%04x after all initializations\n", 315 rx_ctl); 316 317 /* Connect to PHY */ 318 snprintf(priv->phy_name, 20, PHY_ID_FMT, 319 priv->mdio->id, priv->phy_addr); 320 321 priv->phydev = phy_connect(dev->net, priv->phy_name, 322 &ax88172a_adjust_link, 323 PHY_INTERFACE_MODE_MII); 324 if (IS_ERR(priv->phydev)) { 325 netdev_err(dev->net, "Could not connect to PHY device %s\n", 326 priv->phy_name); 327 ret = PTR_ERR(priv->phydev); 328 goto out; 329 } 330 331 netdev_info(dev->net, "Connected to phy %s\n", priv->phy_name); 332 333 /* During power-up, the AX88172A set the power down (BMCR_PDOWN) 334 * bit of the PHY. Bring the PHY up again. 335 */ 336 genphy_resume(priv->phydev); 337 phy_start(priv->phydev); 338 339 return 0; 340 341 out: 342 return ret; 343 344 } 345 346 static int ax88172a_rx_fixup(struct usbnet *dev, struct sk_buff *skb) 347 { 348 struct ax88172a_private *dp = dev->driver_priv; 349 struct asix_rx_fixup_info *rx = &dp->rx_fixup_info; 350 351 return asix_rx_fixup_internal(dev, skb, rx); 352 } 353 354 const struct driver_info ax88172a_info = { 355 .description = "ASIX AX88172A USB 2.0 Ethernet", 356 .bind = ax88172a_bind, 357 .reset = ax88172a_reset, 358 .stop = ax88172a_stop, 359 .unbind = ax88172a_unbind, 360 .status = ax88172a_status, 361 .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | 362 FLAG_MULTI_PACKET, 363 .rx_fixup = ax88172a_rx_fixup, 364 .tx_fixup = asix_tx_fixup, 365 }; 366