1 // SPDX-License-Identifier: GPL-2.0+
2 /* Xilinx GMII2RGMII Converter driver
3  *
4  * Copyright (C) 2016 Xilinx, Inc.
5  * Copyright (C) 2016 Andrew Lunn <andrew@lunn.ch>
6  *
7  * Author: Andrew Lunn <andrew@lunn.ch>
8  * Author: Kedareswara rao Appana <appanad@xilinx.com>
9  *
10  * Description:
11  * This driver is developed for Xilinx GMII2RGMII Converter
12  */
13 #include <linux/module.h>
14 #include <linux/kernel.h>
15 #include <linux/mii.h>
16 #include <linux/mdio.h>
17 #include <linux/phy.h>
18 #include <linux/of_mdio.h>
19 
20 #define XILINX_GMII2RGMII_REG		0x10
21 #define XILINX_GMII2RGMII_SPEED_MASK	(BMCR_SPEED1000 | BMCR_SPEED100)
22 
23 struct gmii2rgmii {
24 	struct phy_device *phy_dev;
25 	struct phy_driver *phy_drv;
26 	struct phy_driver conv_phy_drv;
27 	struct mdio_device *mdio;
28 };
29 
30 static void xgmiitorgmii_configure(struct gmii2rgmii *priv, int speed)
31 {
32 	struct mii_bus *bus = priv->mdio->bus;
33 	int addr = priv->mdio->addr;
34 	u16 val;
35 
36 	val = mdiobus_read(bus, addr, XILINX_GMII2RGMII_REG);
37 	val &= ~XILINX_GMII2RGMII_SPEED_MASK;
38 
39 	if (speed == SPEED_1000)
40 		val |= BMCR_SPEED1000;
41 	else if (speed == SPEED_100)
42 		val |= BMCR_SPEED100;
43 	else
44 		val |= BMCR_SPEED10;
45 
46 	mdiobus_write(bus, addr, XILINX_GMII2RGMII_REG, val);
47 }
48 
49 static int xgmiitorgmii_read_status(struct phy_device *phydev)
50 {
51 	struct gmii2rgmii *priv = mdiodev_get_drvdata(&phydev->mdio);
52 	int err;
53 
54 	if (priv->phy_drv->read_status)
55 		err = priv->phy_drv->read_status(phydev);
56 	else
57 		err = genphy_read_status(phydev);
58 	if (err < 0)
59 		return err;
60 
61 	xgmiitorgmii_configure(priv, phydev->speed);
62 
63 	return 0;
64 }
65 
66 static int xgmiitorgmii_set_loopback(struct phy_device *phydev, bool enable)
67 {
68 	struct gmii2rgmii *priv = mdiodev_get_drvdata(&phydev->mdio);
69 	int err;
70 
71 	if (priv->phy_drv->set_loopback)
72 		err = priv->phy_drv->set_loopback(phydev, enable);
73 	else
74 		err = genphy_loopback(phydev, enable);
75 	if (err < 0)
76 		return err;
77 
78 	xgmiitorgmii_configure(priv, phydev->speed);
79 
80 	return 0;
81 }
82 
83 static int xgmiitorgmii_probe(struct mdio_device *mdiodev)
84 {
85 	struct device *dev = &mdiodev->dev;
86 	struct device_node *np = dev->of_node, *phy_node;
87 	struct gmii2rgmii *priv;
88 
89 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
90 	if (!priv)
91 		return -ENOMEM;
92 
93 	phy_node = of_parse_phandle(np, "phy-handle", 0);
94 	if (!phy_node) {
95 		dev_err(dev, "Couldn't parse phy-handle\n");
96 		return -ENODEV;
97 	}
98 
99 	priv->phy_dev = of_phy_find_device(phy_node);
100 	of_node_put(phy_node);
101 	if (!priv->phy_dev) {
102 		dev_info(dev, "Couldn't find phydev\n");
103 		return -EPROBE_DEFER;
104 	}
105 
106 	if (!priv->phy_dev->drv) {
107 		dev_info(dev, "Attached phy not ready\n");
108 		put_device(&priv->phy_dev->mdio.dev);
109 		return -EPROBE_DEFER;
110 	}
111 
112 	priv->mdio = mdiodev;
113 	priv->phy_drv = priv->phy_dev->drv;
114 	memcpy(&priv->conv_phy_drv, priv->phy_dev->drv,
115 	       sizeof(struct phy_driver));
116 	priv->conv_phy_drv.read_status = xgmiitorgmii_read_status;
117 	priv->conv_phy_drv.set_loopback = xgmiitorgmii_set_loopback;
118 	mdiodev_set_drvdata(&priv->phy_dev->mdio, priv);
119 	priv->phy_dev->drv = &priv->conv_phy_drv;
120 
121 	return 0;
122 }
123 
124 static const struct of_device_id xgmiitorgmii_of_match[] = {
125 	{ .compatible = "xlnx,gmii-to-rgmii-1.0" },
126 	{},
127 };
128 MODULE_DEVICE_TABLE(of, xgmiitorgmii_of_match);
129 
130 static struct mdio_driver xgmiitorgmii_driver = {
131 	.probe	= xgmiitorgmii_probe,
132 	.mdiodrv.driver = {
133 		.name = "xgmiitorgmii",
134 		.of_match_table = xgmiitorgmii_of_match,
135 	},
136 };
137 
138 mdio_module_driver(xgmiitorgmii_driver);
139 
140 MODULE_DESCRIPTION("Xilinx GMII2RGMII converter driver");
141 MODULE_LICENSE("GPL");
142