1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * drivers/net/phy/smsc.c 4 * 5 * Driver for SMSC PHYs 6 * 7 * Author: Herbert Valerio Riedel 8 * 9 * Copyright (c) 2006 Herbert Valerio Riedel <hvr@gnu.org> 10 * 11 * Support added for SMSC LAN8187 and LAN8700 by steve.glendinning@shawell.net 12 * 13 */ 14 15 #include <linux/clk.h> 16 #include <linux/kernel.h> 17 #include <linux/module.h> 18 #include <linux/mii.h> 19 #include <linux/ethtool.h> 20 #include <linux/of.h> 21 #include <linux/phy.h> 22 #include <linux/netdevice.h> 23 #include <linux/smscphy.h> 24 25 /* Vendor-specific PHY Definitions */ 26 /* EDPD NLP / crossover time configuration */ 27 #define PHY_EDPD_CONFIG 16 28 #define PHY_EDPD_CONFIG_EXT_CROSSOVER_ 0x0001 29 30 /* Control/Status Indication Register */ 31 #define SPECIAL_CTRL_STS 27 32 #define SPECIAL_CTRL_STS_OVRRD_AMDIX_ 0x8000 33 #define SPECIAL_CTRL_STS_AMDIX_ENABLE_ 0x4000 34 #define SPECIAL_CTRL_STS_AMDIX_STATE_ 0x2000 35 36 struct smsc_hw_stat { 37 const char *string; 38 u8 reg; 39 u8 bits; 40 }; 41 42 static struct smsc_hw_stat smsc_hw_stats[] = { 43 { "phy_symbol_errors", 26, 16}, 44 }; 45 46 struct smsc_phy_priv { 47 bool energy_enable; 48 struct clk *refclk; 49 }; 50 51 static int smsc_phy_ack_interrupt(struct phy_device *phydev) 52 { 53 int rc = phy_read(phydev, MII_LAN83C185_ISF); 54 55 return rc < 0 ? rc : 0; 56 } 57 58 static int smsc_phy_config_intr(struct phy_device *phydev) 59 { 60 struct smsc_phy_priv *priv = phydev->priv; 61 u16 intmask = 0; 62 int rc; 63 64 if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { 65 rc = smsc_phy_ack_interrupt(phydev); 66 if (rc) 67 return rc; 68 69 intmask = MII_LAN83C185_ISF_INT4 | MII_LAN83C185_ISF_INT6; 70 if (priv->energy_enable) 71 intmask |= MII_LAN83C185_ISF_INT7; 72 rc = phy_write(phydev, MII_LAN83C185_IM, intmask); 73 } else { 74 rc = phy_write(phydev, MII_LAN83C185_IM, intmask); 75 if (rc) 76 return rc; 77 78 rc = smsc_phy_ack_interrupt(phydev); 79 } 80 81 return rc < 0 ? rc : 0; 82 } 83 84 static irqreturn_t smsc_phy_handle_interrupt(struct phy_device *phydev) 85 { 86 int irq_status, irq_enabled; 87 88 irq_enabled = phy_read(phydev, MII_LAN83C185_IM); 89 if (irq_enabled < 0) { 90 phy_error(phydev); 91 return IRQ_NONE; 92 } 93 94 irq_status = phy_read(phydev, MII_LAN83C185_ISF); 95 if (irq_status < 0) { 96 phy_error(phydev); 97 return IRQ_NONE; 98 } 99 100 if (!(irq_status & irq_enabled)) 101 return IRQ_NONE; 102 103 phy_trigger_machine(phydev); 104 105 return IRQ_HANDLED; 106 } 107 108 static int smsc_phy_config_init(struct phy_device *phydev) 109 { 110 struct smsc_phy_priv *priv = phydev->priv; 111 int rc; 112 113 if (!priv->energy_enable) 114 return 0; 115 116 rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); 117 118 if (rc < 0) 119 return rc; 120 121 /* Enable energy detect mode for this SMSC Transceivers */ 122 rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, 123 rc | MII_LAN83C185_EDPWRDOWN); 124 if (rc < 0) 125 return rc; 126 127 return smsc_phy_ack_interrupt(phydev); 128 } 129 130 static int smsc_phy_reset(struct phy_device *phydev) 131 { 132 int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES); 133 if (rc < 0) 134 return rc; 135 136 /* If the SMSC PHY is in power down mode, then set it 137 * in all capable mode before using it. 138 */ 139 if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) { 140 /* set "all capable" mode */ 141 rc |= MII_LAN83C185_MODE_ALL; 142 phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc); 143 } 144 145 /* reset the phy */ 146 return genphy_soft_reset(phydev); 147 } 148 149 static int lan911x_config_init(struct phy_device *phydev) 150 { 151 return smsc_phy_ack_interrupt(phydev); 152 } 153 154 static int lan87xx_config_aneg(struct phy_device *phydev) 155 { 156 int rc; 157 int val; 158 159 switch (phydev->mdix_ctrl) { 160 case ETH_TP_MDI: 161 val = SPECIAL_CTRL_STS_OVRRD_AMDIX_; 162 break; 163 case ETH_TP_MDI_X: 164 val = SPECIAL_CTRL_STS_OVRRD_AMDIX_ | 165 SPECIAL_CTRL_STS_AMDIX_STATE_; 166 break; 167 case ETH_TP_MDI_AUTO: 168 val = SPECIAL_CTRL_STS_AMDIX_ENABLE_; 169 break; 170 default: 171 return genphy_config_aneg(phydev); 172 } 173 174 rc = phy_read(phydev, SPECIAL_CTRL_STS); 175 if (rc < 0) 176 return rc; 177 178 rc &= ~(SPECIAL_CTRL_STS_OVRRD_AMDIX_ | 179 SPECIAL_CTRL_STS_AMDIX_ENABLE_ | 180 SPECIAL_CTRL_STS_AMDIX_STATE_); 181 rc |= val; 182 phy_write(phydev, SPECIAL_CTRL_STS, rc); 183 184 phydev->mdix = phydev->mdix_ctrl; 185 return genphy_config_aneg(phydev); 186 } 187 188 static int lan87xx_config_aneg_ext(struct phy_device *phydev) 189 { 190 int rc; 191 192 /* Extend Manual AutoMDIX timer */ 193 rc = phy_read(phydev, PHY_EDPD_CONFIG); 194 if (rc < 0) 195 return rc; 196 197 rc |= PHY_EDPD_CONFIG_EXT_CROSSOVER_; 198 phy_write(phydev, PHY_EDPD_CONFIG, rc); 199 return lan87xx_config_aneg(phydev); 200 } 201 202 /* 203 * The LAN87xx suffers from rare absence of the ENERGYON-bit when Ethernet cable 204 * plugs in while LAN87xx is in Energy Detect Power-Down mode. This leads to 205 * unstable detection of plugging in Ethernet cable. 206 * This workaround disables Energy Detect Power-Down mode and waiting for 207 * response on link pulses to detect presence of plugged Ethernet cable. 208 * The Energy Detect Power-Down mode is enabled again in the end of procedure to 209 * save approximately 220 mW of power if cable is unplugged. 210 */ 211 static int lan87xx_read_status(struct phy_device *phydev) 212 { 213 struct smsc_phy_priv *priv = phydev->priv; 214 215 int err = genphy_read_status(phydev); 216 217 if (!phydev->link && priv->energy_enable) { 218 /* Disable EDPD to wake up PHY */ 219 int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); 220 if (rc < 0) 221 return rc; 222 223 rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, 224 rc & ~MII_LAN83C185_EDPWRDOWN); 225 if (rc < 0) 226 return rc; 227 228 /* Wait max 640 ms to detect energy and the timeout is not 229 * an actual error. 230 */ 231 read_poll_timeout(phy_read, rc, 232 rc & MII_LAN83C185_ENERGYON || rc < 0, 233 10000, 640000, true, phydev, 234 MII_LAN83C185_CTRL_STATUS); 235 if (rc < 0) 236 return rc; 237 238 /* Re-enable EDPD */ 239 rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); 240 if (rc < 0) 241 return rc; 242 243 rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, 244 rc | MII_LAN83C185_EDPWRDOWN); 245 if (rc < 0) 246 return rc; 247 } 248 249 return err; 250 } 251 252 static int smsc_get_sset_count(struct phy_device *phydev) 253 { 254 return ARRAY_SIZE(smsc_hw_stats); 255 } 256 257 static void smsc_get_strings(struct phy_device *phydev, u8 *data) 258 { 259 int i; 260 261 for (i = 0; i < ARRAY_SIZE(smsc_hw_stats); i++) { 262 strncpy(data + i * ETH_GSTRING_LEN, 263 smsc_hw_stats[i].string, ETH_GSTRING_LEN); 264 } 265 } 266 267 static u64 smsc_get_stat(struct phy_device *phydev, int i) 268 { 269 struct smsc_hw_stat stat = smsc_hw_stats[i]; 270 int val; 271 u64 ret; 272 273 val = phy_read(phydev, stat.reg); 274 if (val < 0) 275 ret = U64_MAX; 276 else 277 ret = val; 278 279 return ret; 280 } 281 282 static void smsc_get_stats(struct phy_device *phydev, 283 struct ethtool_stats *stats, u64 *data) 284 { 285 int i; 286 287 for (i = 0; i < ARRAY_SIZE(smsc_hw_stats); i++) 288 data[i] = smsc_get_stat(phydev, i); 289 } 290 291 static void smsc_phy_remove(struct phy_device *phydev) 292 { 293 struct smsc_phy_priv *priv = phydev->priv; 294 295 clk_disable_unprepare(priv->refclk); 296 clk_put(priv->refclk); 297 } 298 299 static int smsc_phy_probe(struct phy_device *phydev) 300 { 301 struct device *dev = &phydev->mdio.dev; 302 struct device_node *of_node = dev->of_node; 303 struct smsc_phy_priv *priv; 304 int ret; 305 306 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); 307 if (!priv) 308 return -ENOMEM; 309 310 priv->energy_enable = true; 311 312 if (of_property_read_bool(of_node, "smsc,disable-energy-detect")) 313 priv->energy_enable = false; 314 315 phydev->priv = priv; 316 317 /* Make clk optional to keep DTB backward compatibility. */ 318 priv->refclk = clk_get_optional(dev, NULL); 319 if (IS_ERR(priv->refclk)) 320 return dev_err_probe(dev, PTR_ERR(priv->refclk), 321 "Failed to request clock\n"); 322 323 ret = clk_prepare_enable(priv->refclk); 324 if (ret) 325 return ret; 326 327 ret = clk_set_rate(priv->refclk, 50 * 1000 * 1000); 328 if (ret) { 329 clk_disable_unprepare(priv->refclk); 330 return ret; 331 } 332 333 return 0; 334 } 335 336 static struct phy_driver smsc_phy_driver[] = { 337 { 338 .phy_id = 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */ 339 .phy_id_mask = 0xfffffff0, 340 .name = "SMSC LAN83C185", 341 342 /* PHY_BASIC_FEATURES */ 343 344 .probe = smsc_phy_probe, 345 346 /* basic functions */ 347 .config_init = smsc_phy_config_init, 348 .soft_reset = smsc_phy_reset, 349 350 /* IRQ related */ 351 .config_intr = smsc_phy_config_intr, 352 .handle_interrupt = smsc_phy_handle_interrupt, 353 354 .suspend = genphy_suspend, 355 .resume = genphy_resume, 356 }, { 357 .phy_id = 0x0007c0b0, /* OUI=0x00800f, Model#=0x0b */ 358 .phy_id_mask = 0xfffffff0, 359 .name = "SMSC LAN8187", 360 361 /* PHY_BASIC_FEATURES */ 362 363 .probe = smsc_phy_probe, 364 365 /* basic functions */ 366 .config_init = smsc_phy_config_init, 367 .soft_reset = smsc_phy_reset, 368 369 /* IRQ related */ 370 .config_intr = smsc_phy_config_intr, 371 .handle_interrupt = smsc_phy_handle_interrupt, 372 373 /* Statistics */ 374 .get_sset_count = smsc_get_sset_count, 375 .get_strings = smsc_get_strings, 376 .get_stats = smsc_get_stats, 377 378 .suspend = genphy_suspend, 379 .resume = genphy_resume, 380 }, { 381 /* This covers internal PHY (phy_id: 0x0007C0C3) for 382 * LAN9500 (PID: 0x9500), LAN9514 (PID: 0xec00), LAN9505 (PID: 0x9505) 383 */ 384 .phy_id = 0x0007c0c0, /* OUI=0x00800f, Model#=0x0c */ 385 .phy_id_mask = 0xfffffff0, 386 .name = "SMSC LAN8700", 387 388 /* PHY_BASIC_FEATURES */ 389 390 .probe = smsc_phy_probe, 391 392 /* basic functions */ 393 .read_status = lan87xx_read_status, 394 .config_init = smsc_phy_config_init, 395 .soft_reset = smsc_phy_reset, 396 .config_aneg = lan87xx_config_aneg, 397 398 /* IRQ related */ 399 .config_intr = smsc_phy_config_intr, 400 .handle_interrupt = smsc_phy_handle_interrupt, 401 402 /* Statistics */ 403 .get_sset_count = smsc_get_sset_count, 404 .get_strings = smsc_get_strings, 405 .get_stats = smsc_get_stats, 406 407 .suspend = genphy_suspend, 408 .resume = genphy_resume, 409 }, { 410 .phy_id = 0x0007c0d0, /* OUI=0x00800f, Model#=0x0d */ 411 .phy_id_mask = 0xfffffff0, 412 .name = "SMSC LAN911x Internal PHY", 413 414 /* PHY_BASIC_FEATURES */ 415 416 .probe = smsc_phy_probe, 417 418 /* basic functions */ 419 .config_init = lan911x_config_init, 420 421 /* IRQ related */ 422 .config_intr = smsc_phy_config_intr, 423 .handle_interrupt = smsc_phy_handle_interrupt, 424 425 .suspend = genphy_suspend, 426 .resume = genphy_resume, 427 }, { 428 /* This covers internal PHY (phy_id: 0x0007C0F0) for 429 * LAN9500A (PID: 0x9E00), LAN9505A (PID: 0x9E01) 430 */ 431 .phy_id = 0x0007c0f0, /* OUI=0x00800f, Model#=0x0f */ 432 .phy_id_mask = 0xfffffff0, 433 .name = "SMSC LAN8710/LAN8720", 434 435 /* PHY_BASIC_FEATURES */ 436 437 .probe = smsc_phy_probe, 438 .remove = smsc_phy_remove, 439 440 /* basic functions */ 441 .read_status = lan87xx_read_status, 442 .config_init = smsc_phy_config_init, 443 .soft_reset = smsc_phy_reset, 444 .config_aneg = lan87xx_config_aneg_ext, 445 446 /* IRQ related */ 447 .config_intr = smsc_phy_config_intr, 448 .handle_interrupt = smsc_phy_handle_interrupt, 449 450 /* Statistics */ 451 .get_sset_count = smsc_get_sset_count, 452 .get_strings = smsc_get_strings, 453 .get_stats = smsc_get_stats, 454 455 .suspend = genphy_suspend, 456 .resume = genphy_resume, 457 }, { 458 .phy_id = 0x0007c110, 459 .phy_id_mask = 0xfffffff0, 460 .name = "SMSC LAN8740", 461 462 /* PHY_BASIC_FEATURES */ 463 .flags = PHY_RST_AFTER_CLK_EN, 464 465 .probe = smsc_phy_probe, 466 467 /* basic functions */ 468 .read_status = lan87xx_read_status, 469 .config_init = smsc_phy_config_init, 470 .soft_reset = smsc_phy_reset, 471 472 /* IRQ related */ 473 .config_intr = smsc_phy_config_intr, 474 .handle_interrupt = smsc_phy_handle_interrupt, 475 476 /* Statistics */ 477 .get_sset_count = smsc_get_sset_count, 478 .get_strings = smsc_get_strings, 479 .get_stats = smsc_get_stats, 480 481 .suspend = genphy_suspend, 482 .resume = genphy_resume, 483 } }; 484 485 module_phy_driver(smsc_phy_driver); 486 487 MODULE_DESCRIPTION("SMSC PHY driver"); 488 MODULE_AUTHOR("Herbert Valerio Riedel"); 489 MODULE_LICENSE("GPL"); 490 491 static struct mdio_device_id __maybe_unused smsc_tbl[] = { 492 { 0x0007c0a0, 0xfffffff0 }, 493 { 0x0007c0b0, 0xfffffff0 }, 494 { 0x0007c0c0, 0xfffffff0 }, 495 { 0x0007c0d0, 0xfffffff0 }, 496 { 0x0007c0f0, 0xfffffff0 }, 497 { 0x0007c110, 0xfffffff0 }, 498 { } 499 }; 500 501 MODULE_DEVICE_TABLE(mdio, smsc_tbl); 502