1 // SPDX-License-Identifier: GPL-2.0 2 #include <linux/debugfs.h> 3 #include <linux/delay.h> 4 #include <linux/gpio/consumer.h> 5 #include <linux/hwmon.h> 6 #include <linux/i2c.h> 7 #include <linux/interrupt.h> 8 #include <linux/jiffies.h> 9 #include <linux/mdio/mdio-i2c.h> 10 #include <linux/module.h> 11 #include <linux/mutex.h> 12 #include <linux/of.h> 13 #include <linux/phy.h> 14 #include <linux/platform_device.h> 15 #include <linux/rtnetlink.h> 16 #include <linux/slab.h> 17 #include <linux/workqueue.h> 18 19 #include "sfp.h" 20 #include "swphy.h" 21 22 enum { 23 GPIO_MODDEF0, 24 GPIO_LOS, 25 GPIO_TX_FAULT, 26 GPIO_TX_DISABLE, 27 GPIO_RATE_SELECT, 28 GPIO_MAX, 29 30 SFP_F_PRESENT = BIT(GPIO_MODDEF0), 31 SFP_F_LOS = BIT(GPIO_LOS), 32 SFP_F_TX_FAULT = BIT(GPIO_TX_FAULT), 33 SFP_F_TX_DISABLE = BIT(GPIO_TX_DISABLE), 34 SFP_F_RATE_SELECT = BIT(GPIO_RATE_SELECT), 35 36 SFP_E_INSERT = 0, 37 SFP_E_REMOVE, 38 SFP_E_DEV_ATTACH, 39 SFP_E_DEV_DETACH, 40 SFP_E_DEV_DOWN, 41 SFP_E_DEV_UP, 42 SFP_E_TX_FAULT, 43 SFP_E_TX_CLEAR, 44 SFP_E_LOS_HIGH, 45 SFP_E_LOS_LOW, 46 SFP_E_TIMEOUT, 47 48 SFP_MOD_EMPTY = 0, 49 SFP_MOD_ERROR, 50 SFP_MOD_PROBE, 51 SFP_MOD_WAITDEV, 52 SFP_MOD_HPOWER, 53 SFP_MOD_WAITPWR, 54 SFP_MOD_PRESENT, 55 56 SFP_DEV_DETACHED = 0, 57 SFP_DEV_DOWN, 58 SFP_DEV_UP, 59 60 SFP_S_DOWN = 0, 61 SFP_S_FAIL, 62 SFP_S_WAIT, 63 SFP_S_INIT, 64 SFP_S_INIT_PHY, 65 SFP_S_INIT_TX_FAULT, 66 SFP_S_WAIT_LOS, 67 SFP_S_LINK_UP, 68 SFP_S_TX_FAULT, 69 SFP_S_REINIT, 70 SFP_S_TX_DISABLE, 71 }; 72 73 static const char * const mod_state_strings[] = { 74 [SFP_MOD_EMPTY] = "empty", 75 [SFP_MOD_ERROR] = "error", 76 [SFP_MOD_PROBE] = "probe", 77 [SFP_MOD_WAITDEV] = "waitdev", 78 [SFP_MOD_HPOWER] = "hpower", 79 [SFP_MOD_WAITPWR] = "waitpwr", 80 [SFP_MOD_PRESENT] = "present", 81 }; 82 83 static const char *mod_state_to_str(unsigned short mod_state) 84 { 85 if (mod_state >= ARRAY_SIZE(mod_state_strings)) 86 return "Unknown module state"; 87 return mod_state_strings[mod_state]; 88 } 89 90 static const char * const dev_state_strings[] = { 91 [SFP_DEV_DETACHED] = "detached", 92 [SFP_DEV_DOWN] = "down", 93 [SFP_DEV_UP] = "up", 94 }; 95 96 static const char *dev_state_to_str(unsigned short dev_state) 97 { 98 if (dev_state >= ARRAY_SIZE(dev_state_strings)) 99 return "Unknown device state"; 100 return dev_state_strings[dev_state]; 101 } 102 103 static const char * const event_strings[] = { 104 [SFP_E_INSERT] = "insert", 105 [SFP_E_REMOVE] = "remove", 106 [SFP_E_DEV_ATTACH] = "dev_attach", 107 [SFP_E_DEV_DETACH] = "dev_detach", 108 [SFP_E_DEV_DOWN] = "dev_down", 109 [SFP_E_DEV_UP] = "dev_up", 110 [SFP_E_TX_FAULT] = "tx_fault", 111 [SFP_E_TX_CLEAR] = "tx_clear", 112 [SFP_E_LOS_HIGH] = "los_high", 113 [SFP_E_LOS_LOW] = "los_low", 114 [SFP_E_TIMEOUT] = "timeout", 115 }; 116 117 static const char *event_to_str(unsigned short event) 118 { 119 if (event >= ARRAY_SIZE(event_strings)) 120 return "Unknown event"; 121 return event_strings[event]; 122 } 123 124 static const char * const sm_state_strings[] = { 125 [SFP_S_DOWN] = "down", 126 [SFP_S_FAIL] = "fail", 127 [SFP_S_WAIT] = "wait", 128 [SFP_S_INIT] = "init", 129 [SFP_S_INIT_PHY] = "init_phy", 130 [SFP_S_INIT_TX_FAULT] = "init_tx_fault", 131 [SFP_S_WAIT_LOS] = "wait_los", 132 [SFP_S_LINK_UP] = "link_up", 133 [SFP_S_TX_FAULT] = "tx_fault", 134 [SFP_S_REINIT] = "reinit", 135 [SFP_S_TX_DISABLE] = "tx_disable", 136 }; 137 138 static const char *sm_state_to_str(unsigned short sm_state) 139 { 140 if (sm_state >= ARRAY_SIZE(sm_state_strings)) 141 return "Unknown state"; 142 return sm_state_strings[sm_state]; 143 } 144 145 static const char *gpio_names[] = { 146 "mod-def0", 147 "los", 148 "tx-fault", 149 "tx-disable", 150 "rate-select0", 151 }; 152 153 static const enum gpiod_flags gpio_flags[] = { 154 GPIOD_IN, 155 GPIOD_IN, 156 GPIOD_IN, 157 GPIOD_ASIS, 158 GPIOD_ASIS, 159 }; 160 161 /* t_start_up (SFF-8431) or t_init (SFF-8472) is the time required for a 162 * non-cooled module to initialise its laser safety circuitry. We wait 163 * an initial T_WAIT period before we check the tx fault to give any PHY 164 * on board (for a copper SFP) time to initialise. 165 */ 166 #define T_WAIT msecs_to_jiffies(50) 167 #define T_WAIT_ROLLBALL msecs_to_jiffies(25000) 168 #define T_START_UP msecs_to_jiffies(300) 169 #define T_START_UP_BAD_GPON msecs_to_jiffies(60000) 170 171 /* t_reset is the time required to assert the TX_DISABLE signal to reset 172 * an indicated TX_FAULT. 173 */ 174 #define T_RESET_US 10 175 #define T_FAULT_RECOVER msecs_to_jiffies(1000) 176 177 /* N_FAULT_INIT is the number of recovery attempts at module initialisation 178 * time. If the TX_FAULT signal is not deasserted after this number of 179 * attempts at clearing it, we decide that the module is faulty. 180 * N_FAULT is the same but after the module has initialised. 181 */ 182 #define N_FAULT_INIT 5 183 #define N_FAULT 5 184 185 /* T_PHY_RETRY is the time interval between attempts to probe the PHY. 186 * R_PHY_RETRY is the number of attempts. 187 */ 188 #define T_PHY_RETRY msecs_to_jiffies(50) 189 #define R_PHY_RETRY 12 190 191 /* SFP module presence detection is poor: the three MOD DEF signals are 192 * the same length on the PCB, which means it's possible for MOD DEF 0 to 193 * connect before the I2C bus on MOD DEF 1/2. 194 * 195 * The SFF-8472 specifies t_serial ("Time from power on until module is 196 * ready for data transmission over the two wire serial bus.") as 300ms. 197 */ 198 #define T_SERIAL msecs_to_jiffies(300) 199 #define T_HPOWER_LEVEL msecs_to_jiffies(300) 200 #define T_PROBE_RETRY_INIT msecs_to_jiffies(100) 201 #define R_PROBE_RETRY_INIT 10 202 #define T_PROBE_RETRY_SLOW msecs_to_jiffies(5000) 203 #define R_PROBE_RETRY_SLOW 12 204 205 /* SFP modules appear to always have their PHY configured for bus address 206 * 0x56 (which with mdio-i2c, translates to a PHY address of 22). 207 * RollBall SFPs access phy via SFP Enhanced Digital Diagnostic Interface 208 * via address 0x51 (mdio-i2c will use RollBall protocol on this address). 209 */ 210 #define SFP_PHY_ADDR 22 211 #define SFP_PHY_ADDR_ROLLBALL 17 212 213 /* SFP_EEPROM_BLOCK_SIZE is the size of data chunk to read the EEPROM 214 * at a time. Some SFP modules and also some Linux I2C drivers do not like 215 * reads longer than 16 bytes. 216 */ 217 #define SFP_EEPROM_BLOCK_SIZE 16 218 219 struct sff_data { 220 unsigned int gpios; 221 bool (*module_supported)(const struct sfp_eeprom_id *id); 222 }; 223 224 struct sfp { 225 struct device *dev; 226 struct i2c_adapter *i2c; 227 struct mii_bus *i2c_mii; 228 struct sfp_bus *sfp_bus; 229 enum mdio_i2c_proto mdio_protocol; 230 struct phy_device *mod_phy; 231 const struct sff_data *type; 232 size_t i2c_block_size; 233 u32 max_power_mW; 234 235 unsigned int (*get_state)(struct sfp *); 236 void (*set_state)(struct sfp *, unsigned int); 237 int (*read)(struct sfp *, bool, u8, void *, size_t); 238 int (*write)(struct sfp *, bool, u8, void *, size_t); 239 240 struct gpio_desc *gpio[GPIO_MAX]; 241 int gpio_irq[GPIO_MAX]; 242 243 bool need_poll; 244 245 struct mutex st_mutex; /* Protects state */ 246 unsigned int state_hw_mask; 247 unsigned int state_soft_mask; 248 unsigned int state; 249 struct delayed_work poll; 250 struct delayed_work timeout; 251 struct mutex sm_mutex; /* Protects state machine */ 252 unsigned char sm_mod_state; 253 unsigned char sm_mod_tries_init; 254 unsigned char sm_mod_tries; 255 unsigned char sm_dev_state; 256 unsigned short sm_state; 257 unsigned char sm_fault_retries; 258 unsigned char sm_phy_retries; 259 260 struct sfp_eeprom_id id; 261 unsigned int module_power_mW; 262 unsigned int module_t_start_up; 263 unsigned int module_t_wait; 264 265 bool have_a2; 266 bool tx_fault_ignore; 267 268 const struct sfp_quirk *quirk; 269 270 #if IS_ENABLED(CONFIG_HWMON) 271 struct sfp_diag diag; 272 struct delayed_work hwmon_probe; 273 unsigned int hwmon_tries; 274 struct device *hwmon_dev; 275 char *hwmon_name; 276 #endif 277 278 #if IS_ENABLED(CONFIG_DEBUG_FS) 279 struct dentry *debugfs_dir; 280 #endif 281 }; 282 283 static bool sff_module_supported(const struct sfp_eeprom_id *id) 284 { 285 return id->base.phys_id == SFF8024_ID_SFF_8472 && 286 id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP; 287 } 288 289 static const struct sff_data sff_data = { 290 .gpios = SFP_F_LOS | SFP_F_TX_FAULT | SFP_F_TX_DISABLE, 291 .module_supported = sff_module_supported, 292 }; 293 294 static bool sfp_module_supported(const struct sfp_eeprom_id *id) 295 { 296 if (id->base.phys_id == SFF8024_ID_SFP && 297 id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP) 298 return true; 299 300 /* SFP GPON module Ubiquiti U-Fiber Instant has in its EEPROM stored 301 * phys id SFF instead of SFP. Therefore mark this module explicitly 302 * as supported based on vendor name and pn match. 303 */ 304 if (id->base.phys_id == SFF8024_ID_SFF_8472 && 305 id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP && 306 !memcmp(id->base.vendor_name, "UBNT ", 16) && 307 !memcmp(id->base.vendor_pn, "UF-INSTANT ", 16)) 308 return true; 309 310 return false; 311 } 312 313 static const struct sff_data sfp_data = { 314 .gpios = SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT | 315 SFP_F_TX_DISABLE | SFP_F_RATE_SELECT, 316 .module_supported = sfp_module_supported, 317 }; 318 319 static const struct of_device_id sfp_of_match[] = { 320 { .compatible = "sff,sff", .data = &sff_data, }, 321 { .compatible = "sff,sfp", .data = &sfp_data, }, 322 { }, 323 }; 324 MODULE_DEVICE_TABLE(of, sfp_of_match); 325 326 static void sfp_fixup_long_startup(struct sfp *sfp) 327 { 328 sfp->module_t_start_up = T_START_UP_BAD_GPON; 329 } 330 331 static void sfp_fixup_ignore_tx_fault(struct sfp *sfp) 332 { 333 sfp->tx_fault_ignore = true; 334 } 335 336 static void sfp_fixup_halny_gsfp(struct sfp *sfp) 337 { 338 /* Ignore the TX_FAULT and LOS signals on this module. 339 * these are possibly used for other purposes on this 340 * module, e.g. a serial port. 341 */ 342 sfp->state_hw_mask &= ~(SFP_F_TX_FAULT | SFP_F_LOS); 343 } 344 345 static void sfp_fixup_rollball(struct sfp *sfp) 346 { 347 sfp->mdio_protocol = MDIO_I2C_ROLLBALL; 348 sfp->module_t_wait = T_WAIT_ROLLBALL; 349 } 350 351 static void sfp_fixup_rollball_cc(struct sfp *sfp) 352 { 353 sfp_fixup_rollball(sfp); 354 355 /* Some RollBall SFPs may have wrong (zero) extended compliance code 356 * burned in EEPROM. For PHY probing we need the correct one. 357 */ 358 sfp->id.base.extended_cc = SFF8024_ECC_10GBASE_T_SFI; 359 } 360 361 static void sfp_quirk_2500basex(const struct sfp_eeprom_id *id, 362 unsigned long *modes, 363 unsigned long *interfaces) 364 { 365 linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseX_Full_BIT, modes); 366 __set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces); 367 } 368 369 static void sfp_quirk_disable_autoneg(const struct sfp_eeprom_id *id, 370 unsigned long *modes, 371 unsigned long *interfaces) 372 { 373 linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, modes); 374 } 375 376 static void sfp_quirk_oem_2_5g(const struct sfp_eeprom_id *id, 377 unsigned long *modes, 378 unsigned long *interfaces) 379 { 380 /* Copper 2.5G SFP */ 381 linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, modes); 382 __set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces); 383 sfp_quirk_disable_autoneg(id, modes, interfaces); 384 } 385 386 static void sfp_quirk_ubnt_uf_instant(const struct sfp_eeprom_id *id, 387 unsigned long *modes, 388 unsigned long *interfaces) 389 { 390 /* Ubiquiti U-Fiber Instant module claims that support all transceiver 391 * types including 10G Ethernet which is not truth. So clear all claimed 392 * modes and set only one mode which module supports: 1000baseX_Full. 393 */ 394 linkmode_zero(modes); 395 linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, modes); 396 } 397 398 #define SFP_QUIRK(_v, _p, _m, _f) \ 399 { .vendor = _v, .part = _p, .modes = _m, .fixup = _f, } 400 #define SFP_QUIRK_M(_v, _p, _m) SFP_QUIRK(_v, _p, _m, NULL) 401 #define SFP_QUIRK_F(_v, _p, _f) SFP_QUIRK(_v, _p, NULL, _f) 402 403 static const struct sfp_quirk sfp_quirks[] = { 404 // Alcatel Lucent G-010S-P can operate at 2500base-X, but incorrectly 405 // report 2500MBd NRZ in their EEPROM 406 SFP_QUIRK_M("ALCATELLUCENT", "G010SP", sfp_quirk_2500basex), 407 408 // Alcatel Lucent G-010S-A can operate at 2500base-X, but report 3.2GBd 409 // NRZ in their EEPROM 410 SFP_QUIRK("ALCATELLUCENT", "3FE46541AA", sfp_quirk_2500basex, 411 sfp_fixup_long_startup), 412 413 SFP_QUIRK_F("HALNy", "HL-GSFP", sfp_fixup_halny_gsfp), 414 415 // HG MXPD-483II-F 2.5G supports 2500Base-X, but incorrectly reports 416 // 2600MBd in their EERPOM 417 SFP_QUIRK_M("HG GENUINE", "MXPD-483II", sfp_quirk_2500basex), 418 419 // Huawei MA5671A can operate at 2500base-X, but report 1.2GBd NRZ in 420 // their EEPROM 421 SFP_QUIRK("HUAWEI", "MA5671A", sfp_quirk_2500basex, 422 sfp_fixup_ignore_tx_fault), 423 424 // Lantech 8330-262D-E can operate at 2500base-X, but incorrectly report 425 // 2500MBd NRZ in their EEPROM 426 SFP_QUIRK_M("Lantech", "8330-262D-E", sfp_quirk_2500basex), 427 428 SFP_QUIRK_M("UBNT", "UF-INSTANT", sfp_quirk_ubnt_uf_instant), 429 430 SFP_QUIRK_F("OEM", "SFP-10G-T", sfp_fixup_rollball_cc), 431 SFP_QUIRK_M("OEM", "SFP-2.5G-T", sfp_quirk_oem_2_5g), 432 SFP_QUIRK_F("OEM", "RTSFP-10", sfp_fixup_rollball_cc), 433 SFP_QUIRK_F("OEM", "RTSFP-10G", sfp_fixup_rollball_cc), 434 SFP_QUIRK_F("Turris", "RTSFP-10", sfp_fixup_rollball), 435 SFP_QUIRK_F("Turris", "RTSFP-10G", sfp_fixup_rollball), 436 }; 437 438 static size_t sfp_strlen(const char *str, size_t maxlen) 439 { 440 size_t size, i; 441 442 /* Trailing characters should be filled with space chars, but 443 * some manufacturers can't read SFF-8472 and use NUL. 444 */ 445 for (i = 0, size = 0; i < maxlen; i++) 446 if (str[i] != ' ' && str[i] != '\0') 447 size = i + 1; 448 449 return size; 450 } 451 452 static bool sfp_match(const char *qs, const char *str, size_t len) 453 { 454 if (!qs) 455 return true; 456 if (strlen(qs) != len) 457 return false; 458 return !strncmp(qs, str, len); 459 } 460 461 static const struct sfp_quirk *sfp_lookup_quirk(const struct sfp_eeprom_id *id) 462 { 463 const struct sfp_quirk *q; 464 unsigned int i; 465 size_t vs, ps; 466 467 vs = sfp_strlen(id->base.vendor_name, ARRAY_SIZE(id->base.vendor_name)); 468 ps = sfp_strlen(id->base.vendor_pn, ARRAY_SIZE(id->base.vendor_pn)); 469 470 for (i = 0, q = sfp_quirks; i < ARRAY_SIZE(sfp_quirks); i++, q++) 471 if (sfp_match(q->vendor, id->base.vendor_name, vs) && 472 sfp_match(q->part, id->base.vendor_pn, ps)) 473 return q; 474 475 return NULL; 476 } 477 478 static unsigned long poll_jiffies; 479 480 static unsigned int sfp_gpio_get_state(struct sfp *sfp) 481 { 482 unsigned int i, state, v; 483 484 for (i = state = 0; i < GPIO_MAX; i++) { 485 if (gpio_flags[i] != GPIOD_IN || !sfp->gpio[i]) 486 continue; 487 488 v = gpiod_get_value_cansleep(sfp->gpio[i]); 489 if (v) 490 state |= BIT(i); 491 } 492 493 return state; 494 } 495 496 static unsigned int sff_gpio_get_state(struct sfp *sfp) 497 { 498 return sfp_gpio_get_state(sfp) | SFP_F_PRESENT; 499 } 500 501 static void sfp_gpio_set_state(struct sfp *sfp, unsigned int state) 502 { 503 if (state & SFP_F_PRESENT) { 504 /* If the module is present, drive the signals */ 505 if (sfp->gpio[GPIO_TX_DISABLE]) 506 gpiod_direction_output(sfp->gpio[GPIO_TX_DISABLE], 507 state & SFP_F_TX_DISABLE); 508 if (state & SFP_F_RATE_SELECT) 509 gpiod_direction_output(sfp->gpio[GPIO_RATE_SELECT], 510 state & SFP_F_RATE_SELECT); 511 } else { 512 /* Otherwise, let them float to the pull-ups */ 513 if (sfp->gpio[GPIO_TX_DISABLE]) 514 gpiod_direction_input(sfp->gpio[GPIO_TX_DISABLE]); 515 if (state & SFP_F_RATE_SELECT) 516 gpiod_direction_input(sfp->gpio[GPIO_RATE_SELECT]); 517 } 518 } 519 520 static int sfp_i2c_read(struct sfp *sfp, bool a2, u8 dev_addr, void *buf, 521 size_t len) 522 { 523 struct i2c_msg msgs[2]; 524 u8 bus_addr = a2 ? 0x51 : 0x50; 525 size_t block_size = sfp->i2c_block_size; 526 size_t this_len; 527 int ret; 528 529 msgs[0].addr = bus_addr; 530 msgs[0].flags = 0; 531 msgs[0].len = 1; 532 msgs[0].buf = &dev_addr; 533 msgs[1].addr = bus_addr; 534 msgs[1].flags = I2C_M_RD; 535 msgs[1].len = len; 536 msgs[1].buf = buf; 537 538 while (len) { 539 this_len = len; 540 if (this_len > block_size) 541 this_len = block_size; 542 543 msgs[1].len = this_len; 544 545 ret = i2c_transfer(sfp->i2c, msgs, ARRAY_SIZE(msgs)); 546 if (ret < 0) 547 return ret; 548 549 if (ret != ARRAY_SIZE(msgs)) 550 break; 551 552 msgs[1].buf += this_len; 553 dev_addr += this_len; 554 len -= this_len; 555 } 556 557 return msgs[1].buf - (u8 *)buf; 558 } 559 560 static int sfp_i2c_write(struct sfp *sfp, bool a2, u8 dev_addr, void *buf, 561 size_t len) 562 { 563 struct i2c_msg msgs[1]; 564 u8 bus_addr = a2 ? 0x51 : 0x50; 565 int ret; 566 567 msgs[0].addr = bus_addr; 568 msgs[0].flags = 0; 569 msgs[0].len = 1 + len; 570 msgs[0].buf = kmalloc(1 + len, GFP_KERNEL); 571 if (!msgs[0].buf) 572 return -ENOMEM; 573 574 msgs[0].buf[0] = dev_addr; 575 memcpy(&msgs[0].buf[1], buf, len); 576 577 ret = i2c_transfer(sfp->i2c, msgs, ARRAY_SIZE(msgs)); 578 579 kfree(msgs[0].buf); 580 581 if (ret < 0) 582 return ret; 583 584 return ret == ARRAY_SIZE(msgs) ? len : 0; 585 } 586 587 static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c) 588 { 589 if (!i2c_check_functionality(i2c, I2C_FUNC_I2C)) 590 return -EINVAL; 591 592 sfp->i2c = i2c; 593 sfp->read = sfp_i2c_read; 594 sfp->write = sfp_i2c_write; 595 596 return 0; 597 } 598 599 static int sfp_i2c_mdiobus_create(struct sfp *sfp) 600 { 601 struct mii_bus *i2c_mii; 602 int ret; 603 604 i2c_mii = mdio_i2c_alloc(sfp->dev, sfp->i2c, sfp->mdio_protocol); 605 if (IS_ERR(i2c_mii)) 606 return PTR_ERR(i2c_mii); 607 608 i2c_mii->name = "SFP I2C Bus"; 609 i2c_mii->phy_mask = ~0; 610 611 ret = mdiobus_register(i2c_mii); 612 if (ret < 0) { 613 mdiobus_free(i2c_mii); 614 return ret; 615 } 616 617 sfp->i2c_mii = i2c_mii; 618 619 return 0; 620 } 621 622 static void sfp_i2c_mdiobus_destroy(struct sfp *sfp) 623 { 624 mdiobus_unregister(sfp->i2c_mii); 625 sfp->i2c_mii = NULL; 626 } 627 628 /* Interface */ 629 static int sfp_read(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len) 630 { 631 return sfp->read(sfp, a2, addr, buf, len); 632 } 633 634 static int sfp_write(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len) 635 { 636 return sfp->write(sfp, a2, addr, buf, len); 637 } 638 639 static int sfp_modify_u8(struct sfp *sfp, bool a2, u8 addr, u8 mask, u8 val) 640 { 641 int ret; 642 u8 old, v; 643 644 ret = sfp_read(sfp, a2, addr, &old, sizeof(old)); 645 if (ret != sizeof(old)) 646 return ret; 647 648 v = (old & ~mask) | (val & mask); 649 if (v == old) 650 return sizeof(v); 651 652 return sfp_write(sfp, a2, addr, &v, sizeof(v)); 653 } 654 655 static unsigned int sfp_soft_get_state(struct sfp *sfp) 656 { 657 unsigned int state = 0; 658 u8 status; 659 int ret; 660 661 ret = sfp_read(sfp, true, SFP_STATUS, &status, sizeof(status)); 662 if (ret == sizeof(status)) { 663 if (status & SFP_STATUS_RX_LOS) 664 state |= SFP_F_LOS; 665 if (status & SFP_STATUS_TX_FAULT) 666 state |= SFP_F_TX_FAULT; 667 } else { 668 dev_err_ratelimited(sfp->dev, 669 "failed to read SFP soft status: %pe\n", 670 ERR_PTR(ret)); 671 /* Preserve the current state */ 672 state = sfp->state; 673 } 674 675 return state & sfp->state_soft_mask; 676 } 677 678 static void sfp_soft_set_state(struct sfp *sfp, unsigned int state) 679 { 680 u8 mask = SFP_STATUS_TX_DISABLE_FORCE; 681 u8 val = 0; 682 683 if (state & SFP_F_TX_DISABLE) 684 val |= SFP_STATUS_TX_DISABLE_FORCE; 685 686 687 sfp_modify_u8(sfp, true, SFP_STATUS, mask, val); 688 } 689 690 static void sfp_soft_start_poll(struct sfp *sfp) 691 { 692 const struct sfp_eeprom_id *id = &sfp->id; 693 unsigned int mask = 0; 694 695 sfp->state_soft_mask = 0; 696 if (id->ext.enhopts & SFP_ENHOPTS_SOFT_TX_DISABLE) 697 mask |= SFP_F_TX_DISABLE; 698 if (id->ext.enhopts & SFP_ENHOPTS_SOFT_TX_FAULT) 699 mask |= SFP_F_TX_FAULT; 700 if (id->ext.enhopts & SFP_ENHOPTS_SOFT_RX_LOS) 701 mask |= SFP_F_LOS; 702 703 // Poll the soft state for hardware pins we want to ignore 704 sfp->state_soft_mask = ~sfp->state_hw_mask & mask; 705 706 if (sfp->state_soft_mask & (SFP_F_LOS | SFP_F_TX_FAULT) && 707 !sfp->need_poll) 708 mod_delayed_work(system_wq, &sfp->poll, poll_jiffies); 709 } 710 711 static void sfp_soft_stop_poll(struct sfp *sfp) 712 { 713 sfp->state_soft_mask = 0; 714 } 715 716 static unsigned int sfp_get_state(struct sfp *sfp) 717 { 718 unsigned int soft = sfp->state_soft_mask & (SFP_F_LOS | SFP_F_TX_FAULT); 719 unsigned int state; 720 721 state = sfp->get_state(sfp) & sfp->state_hw_mask; 722 if (state & SFP_F_PRESENT && soft) 723 state |= sfp_soft_get_state(sfp); 724 725 return state; 726 } 727 728 static void sfp_set_state(struct sfp *sfp, unsigned int state) 729 { 730 sfp->set_state(sfp, state); 731 732 if (state & SFP_F_PRESENT && 733 sfp->state_soft_mask & SFP_F_TX_DISABLE) 734 sfp_soft_set_state(sfp, state); 735 } 736 737 static void sfp_mod_state(struct sfp *sfp, unsigned int mask, unsigned int set) 738 { 739 sfp->state = (sfp->state & ~mask) | set; 740 sfp_set_state(sfp, sfp->state); 741 } 742 743 static unsigned int sfp_check(void *buf, size_t len) 744 { 745 u8 *p, check; 746 747 for (p = buf, check = 0; len; p++, len--) 748 check += *p; 749 750 return check; 751 } 752 753 /* hwmon */ 754 #if IS_ENABLED(CONFIG_HWMON) 755 static umode_t sfp_hwmon_is_visible(const void *data, 756 enum hwmon_sensor_types type, 757 u32 attr, int channel) 758 { 759 const struct sfp *sfp = data; 760 761 switch (type) { 762 case hwmon_temp: 763 switch (attr) { 764 case hwmon_temp_min_alarm: 765 case hwmon_temp_max_alarm: 766 case hwmon_temp_lcrit_alarm: 767 case hwmon_temp_crit_alarm: 768 case hwmon_temp_min: 769 case hwmon_temp_max: 770 case hwmon_temp_lcrit: 771 case hwmon_temp_crit: 772 if (!(sfp->id.ext.enhopts & SFP_ENHOPTS_ALARMWARN)) 773 return 0; 774 fallthrough; 775 case hwmon_temp_input: 776 case hwmon_temp_label: 777 return 0444; 778 default: 779 return 0; 780 } 781 case hwmon_in: 782 switch (attr) { 783 case hwmon_in_min_alarm: 784 case hwmon_in_max_alarm: 785 case hwmon_in_lcrit_alarm: 786 case hwmon_in_crit_alarm: 787 case hwmon_in_min: 788 case hwmon_in_max: 789 case hwmon_in_lcrit: 790 case hwmon_in_crit: 791 if (!(sfp->id.ext.enhopts & SFP_ENHOPTS_ALARMWARN)) 792 return 0; 793 fallthrough; 794 case hwmon_in_input: 795 case hwmon_in_label: 796 return 0444; 797 default: 798 return 0; 799 } 800 case hwmon_curr: 801 switch (attr) { 802 case hwmon_curr_min_alarm: 803 case hwmon_curr_max_alarm: 804 case hwmon_curr_lcrit_alarm: 805 case hwmon_curr_crit_alarm: 806 case hwmon_curr_min: 807 case hwmon_curr_max: 808 case hwmon_curr_lcrit: 809 case hwmon_curr_crit: 810 if (!(sfp->id.ext.enhopts & SFP_ENHOPTS_ALARMWARN)) 811 return 0; 812 fallthrough; 813 case hwmon_curr_input: 814 case hwmon_curr_label: 815 return 0444; 816 default: 817 return 0; 818 } 819 case hwmon_power: 820 /* External calibration of receive power requires 821 * floating point arithmetic. Doing that in the kernel 822 * is not easy, so just skip it. If the module does 823 * not require external calibration, we can however 824 * show receiver power, since FP is then not needed. 825 */ 826 if (sfp->id.ext.diagmon & SFP_DIAGMON_EXT_CAL && 827 channel == 1) 828 return 0; 829 switch (attr) { 830 case hwmon_power_min_alarm: 831 case hwmon_power_max_alarm: 832 case hwmon_power_lcrit_alarm: 833 case hwmon_power_crit_alarm: 834 case hwmon_power_min: 835 case hwmon_power_max: 836 case hwmon_power_lcrit: 837 case hwmon_power_crit: 838 if (!(sfp->id.ext.enhopts & SFP_ENHOPTS_ALARMWARN)) 839 return 0; 840 fallthrough; 841 case hwmon_power_input: 842 case hwmon_power_label: 843 return 0444; 844 default: 845 return 0; 846 } 847 default: 848 return 0; 849 } 850 } 851 852 static int sfp_hwmon_read_sensor(struct sfp *sfp, int reg, long *value) 853 { 854 __be16 val; 855 int err; 856 857 err = sfp_read(sfp, true, reg, &val, sizeof(val)); 858 if (err < 0) 859 return err; 860 861 *value = be16_to_cpu(val); 862 863 return 0; 864 } 865 866 static void sfp_hwmon_to_rx_power(long *value) 867 { 868 *value = DIV_ROUND_CLOSEST(*value, 10); 869 } 870 871 static void sfp_hwmon_calibrate(struct sfp *sfp, unsigned int slope, int offset, 872 long *value) 873 { 874 if (sfp->id.ext.diagmon & SFP_DIAGMON_EXT_CAL) 875 *value = DIV_ROUND_CLOSEST(*value * slope, 256) + offset; 876 } 877 878 static void sfp_hwmon_calibrate_temp(struct sfp *sfp, long *value) 879 { 880 sfp_hwmon_calibrate(sfp, be16_to_cpu(sfp->diag.cal_t_slope), 881 be16_to_cpu(sfp->diag.cal_t_offset), value); 882 883 if (*value >= 0x8000) 884 *value -= 0x10000; 885 886 *value = DIV_ROUND_CLOSEST(*value * 1000, 256); 887 } 888 889 static void sfp_hwmon_calibrate_vcc(struct sfp *sfp, long *value) 890 { 891 sfp_hwmon_calibrate(sfp, be16_to_cpu(sfp->diag.cal_v_slope), 892 be16_to_cpu(sfp->diag.cal_v_offset), value); 893 894 *value = DIV_ROUND_CLOSEST(*value, 10); 895 } 896 897 static void sfp_hwmon_calibrate_bias(struct sfp *sfp, long *value) 898 { 899 sfp_hwmon_calibrate(sfp, be16_to_cpu(sfp->diag.cal_txi_slope), 900 be16_to_cpu(sfp->diag.cal_txi_offset), value); 901 902 *value = DIV_ROUND_CLOSEST(*value, 500); 903 } 904 905 static void sfp_hwmon_calibrate_tx_power(struct sfp *sfp, long *value) 906 { 907 sfp_hwmon_calibrate(sfp, be16_to_cpu(sfp->diag.cal_txpwr_slope), 908 be16_to_cpu(sfp->diag.cal_txpwr_offset), value); 909 910 *value = DIV_ROUND_CLOSEST(*value, 10); 911 } 912 913 static int sfp_hwmon_read_temp(struct sfp *sfp, int reg, long *value) 914 { 915 int err; 916 917 err = sfp_hwmon_read_sensor(sfp, reg, value); 918 if (err < 0) 919 return err; 920 921 sfp_hwmon_calibrate_temp(sfp, value); 922 923 return 0; 924 } 925 926 static int sfp_hwmon_read_vcc(struct sfp *sfp, int reg, long *value) 927 { 928 int err; 929 930 err = sfp_hwmon_read_sensor(sfp, reg, value); 931 if (err < 0) 932 return err; 933 934 sfp_hwmon_calibrate_vcc(sfp, value); 935 936 return 0; 937 } 938 939 static int sfp_hwmon_read_bias(struct sfp *sfp, int reg, long *value) 940 { 941 int err; 942 943 err = sfp_hwmon_read_sensor(sfp, reg, value); 944 if (err < 0) 945 return err; 946 947 sfp_hwmon_calibrate_bias(sfp, value); 948 949 return 0; 950 } 951 952 static int sfp_hwmon_read_tx_power(struct sfp *sfp, int reg, long *value) 953 { 954 int err; 955 956 err = sfp_hwmon_read_sensor(sfp, reg, value); 957 if (err < 0) 958 return err; 959 960 sfp_hwmon_calibrate_tx_power(sfp, value); 961 962 return 0; 963 } 964 965 static int sfp_hwmon_read_rx_power(struct sfp *sfp, int reg, long *value) 966 { 967 int err; 968 969 err = sfp_hwmon_read_sensor(sfp, reg, value); 970 if (err < 0) 971 return err; 972 973 sfp_hwmon_to_rx_power(value); 974 975 return 0; 976 } 977 978 static int sfp_hwmon_temp(struct sfp *sfp, u32 attr, long *value) 979 { 980 u8 status; 981 int err; 982 983 switch (attr) { 984 case hwmon_temp_input: 985 return sfp_hwmon_read_temp(sfp, SFP_TEMP, value); 986 987 case hwmon_temp_lcrit: 988 *value = be16_to_cpu(sfp->diag.temp_low_alarm); 989 sfp_hwmon_calibrate_temp(sfp, value); 990 return 0; 991 992 case hwmon_temp_min: 993 *value = be16_to_cpu(sfp->diag.temp_low_warn); 994 sfp_hwmon_calibrate_temp(sfp, value); 995 return 0; 996 case hwmon_temp_max: 997 *value = be16_to_cpu(sfp->diag.temp_high_warn); 998 sfp_hwmon_calibrate_temp(sfp, value); 999 return 0; 1000 1001 case hwmon_temp_crit: 1002 *value = be16_to_cpu(sfp->diag.temp_high_alarm); 1003 sfp_hwmon_calibrate_temp(sfp, value); 1004 return 0; 1005 1006 case hwmon_temp_lcrit_alarm: 1007 err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status)); 1008 if (err < 0) 1009 return err; 1010 1011 *value = !!(status & SFP_ALARM0_TEMP_LOW); 1012 return 0; 1013 1014 case hwmon_temp_min_alarm: 1015 err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status)); 1016 if (err < 0) 1017 return err; 1018 1019 *value = !!(status & SFP_WARN0_TEMP_LOW); 1020 return 0; 1021 1022 case hwmon_temp_max_alarm: 1023 err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status)); 1024 if (err < 0) 1025 return err; 1026 1027 *value = !!(status & SFP_WARN0_TEMP_HIGH); 1028 return 0; 1029 1030 case hwmon_temp_crit_alarm: 1031 err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status)); 1032 if (err < 0) 1033 return err; 1034 1035 *value = !!(status & SFP_ALARM0_TEMP_HIGH); 1036 return 0; 1037 default: 1038 return -EOPNOTSUPP; 1039 } 1040 1041 return -EOPNOTSUPP; 1042 } 1043 1044 static int sfp_hwmon_vcc(struct sfp *sfp, u32 attr, long *value) 1045 { 1046 u8 status; 1047 int err; 1048 1049 switch (attr) { 1050 case hwmon_in_input: 1051 return sfp_hwmon_read_vcc(sfp, SFP_VCC, value); 1052 1053 case hwmon_in_lcrit: 1054 *value = be16_to_cpu(sfp->diag.volt_low_alarm); 1055 sfp_hwmon_calibrate_vcc(sfp, value); 1056 return 0; 1057 1058 case hwmon_in_min: 1059 *value = be16_to_cpu(sfp->diag.volt_low_warn); 1060 sfp_hwmon_calibrate_vcc(sfp, value); 1061 return 0; 1062 1063 case hwmon_in_max: 1064 *value = be16_to_cpu(sfp->diag.volt_high_warn); 1065 sfp_hwmon_calibrate_vcc(sfp, value); 1066 return 0; 1067 1068 case hwmon_in_crit: 1069 *value = be16_to_cpu(sfp->diag.volt_high_alarm); 1070 sfp_hwmon_calibrate_vcc(sfp, value); 1071 return 0; 1072 1073 case hwmon_in_lcrit_alarm: 1074 err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status)); 1075 if (err < 0) 1076 return err; 1077 1078 *value = !!(status & SFP_ALARM0_VCC_LOW); 1079 return 0; 1080 1081 case hwmon_in_min_alarm: 1082 err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status)); 1083 if (err < 0) 1084 return err; 1085 1086 *value = !!(status & SFP_WARN0_VCC_LOW); 1087 return 0; 1088 1089 case hwmon_in_max_alarm: 1090 err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status)); 1091 if (err < 0) 1092 return err; 1093 1094 *value = !!(status & SFP_WARN0_VCC_HIGH); 1095 return 0; 1096 1097 case hwmon_in_crit_alarm: 1098 err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status)); 1099 if (err < 0) 1100 return err; 1101 1102 *value = !!(status & SFP_ALARM0_VCC_HIGH); 1103 return 0; 1104 default: 1105 return -EOPNOTSUPP; 1106 } 1107 1108 return -EOPNOTSUPP; 1109 } 1110 1111 static int sfp_hwmon_bias(struct sfp *sfp, u32 attr, long *value) 1112 { 1113 u8 status; 1114 int err; 1115 1116 switch (attr) { 1117 case hwmon_curr_input: 1118 return sfp_hwmon_read_bias(sfp, SFP_TX_BIAS, value); 1119 1120 case hwmon_curr_lcrit: 1121 *value = be16_to_cpu(sfp->diag.bias_low_alarm); 1122 sfp_hwmon_calibrate_bias(sfp, value); 1123 return 0; 1124 1125 case hwmon_curr_min: 1126 *value = be16_to_cpu(sfp->diag.bias_low_warn); 1127 sfp_hwmon_calibrate_bias(sfp, value); 1128 return 0; 1129 1130 case hwmon_curr_max: 1131 *value = be16_to_cpu(sfp->diag.bias_high_warn); 1132 sfp_hwmon_calibrate_bias(sfp, value); 1133 return 0; 1134 1135 case hwmon_curr_crit: 1136 *value = be16_to_cpu(sfp->diag.bias_high_alarm); 1137 sfp_hwmon_calibrate_bias(sfp, value); 1138 return 0; 1139 1140 case hwmon_curr_lcrit_alarm: 1141 err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status)); 1142 if (err < 0) 1143 return err; 1144 1145 *value = !!(status & SFP_ALARM0_TX_BIAS_LOW); 1146 return 0; 1147 1148 case hwmon_curr_min_alarm: 1149 err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status)); 1150 if (err < 0) 1151 return err; 1152 1153 *value = !!(status & SFP_WARN0_TX_BIAS_LOW); 1154 return 0; 1155 1156 case hwmon_curr_max_alarm: 1157 err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status)); 1158 if (err < 0) 1159 return err; 1160 1161 *value = !!(status & SFP_WARN0_TX_BIAS_HIGH); 1162 return 0; 1163 1164 case hwmon_curr_crit_alarm: 1165 err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status)); 1166 if (err < 0) 1167 return err; 1168 1169 *value = !!(status & SFP_ALARM0_TX_BIAS_HIGH); 1170 return 0; 1171 default: 1172 return -EOPNOTSUPP; 1173 } 1174 1175 return -EOPNOTSUPP; 1176 } 1177 1178 static int sfp_hwmon_tx_power(struct sfp *sfp, u32 attr, long *value) 1179 { 1180 u8 status; 1181 int err; 1182 1183 switch (attr) { 1184 case hwmon_power_input: 1185 return sfp_hwmon_read_tx_power(sfp, SFP_TX_POWER, value); 1186 1187 case hwmon_power_lcrit: 1188 *value = be16_to_cpu(sfp->diag.txpwr_low_alarm); 1189 sfp_hwmon_calibrate_tx_power(sfp, value); 1190 return 0; 1191 1192 case hwmon_power_min: 1193 *value = be16_to_cpu(sfp->diag.txpwr_low_warn); 1194 sfp_hwmon_calibrate_tx_power(sfp, value); 1195 return 0; 1196 1197 case hwmon_power_max: 1198 *value = be16_to_cpu(sfp->diag.txpwr_high_warn); 1199 sfp_hwmon_calibrate_tx_power(sfp, value); 1200 return 0; 1201 1202 case hwmon_power_crit: 1203 *value = be16_to_cpu(sfp->diag.txpwr_high_alarm); 1204 sfp_hwmon_calibrate_tx_power(sfp, value); 1205 return 0; 1206 1207 case hwmon_power_lcrit_alarm: 1208 err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status)); 1209 if (err < 0) 1210 return err; 1211 1212 *value = !!(status & SFP_ALARM0_TXPWR_LOW); 1213 return 0; 1214 1215 case hwmon_power_min_alarm: 1216 err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status)); 1217 if (err < 0) 1218 return err; 1219 1220 *value = !!(status & SFP_WARN0_TXPWR_LOW); 1221 return 0; 1222 1223 case hwmon_power_max_alarm: 1224 err = sfp_read(sfp, true, SFP_WARN0, &status, sizeof(status)); 1225 if (err < 0) 1226 return err; 1227 1228 *value = !!(status & SFP_WARN0_TXPWR_HIGH); 1229 return 0; 1230 1231 case hwmon_power_crit_alarm: 1232 err = sfp_read(sfp, true, SFP_ALARM0, &status, sizeof(status)); 1233 if (err < 0) 1234 return err; 1235 1236 *value = !!(status & SFP_ALARM0_TXPWR_HIGH); 1237 return 0; 1238 default: 1239 return -EOPNOTSUPP; 1240 } 1241 1242 return -EOPNOTSUPP; 1243 } 1244 1245 static int sfp_hwmon_rx_power(struct sfp *sfp, u32 attr, long *value) 1246 { 1247 u8 status; 1248 int err; 1249 1250 switch (attr) { 1251 case hwmon_power_input: 1252 return sfp_hwmon_read_rx_power(sfp, SFP_RX_POWER, value); 1253 1254 case hwmon_power_lcrit: 1255 *value = be16_to_cpu(sfp->diag.rxpwr_low_alarm); 1256 sfp_hwmon_to_rx_power(value); 1257 return 0; 1258 1259 case hwmon_power_min: 1260 *value = be16_to_cpu(sfp->diag.rxpwr_low_warn); 1261 sfp_hwmon_to_rx_power(value); 1262 return 0; 1263 1264 case hwmon_power_max: 1265 *value = be16_to_cpu(sfp->diag.rxpwr_high_warn); 1266 sfp_hwmon_to_rx_power(value); 1267 return 0; 1268 1269 case hwmon_power_crit: 1270 *value = be16_to_cpu(sfp->diag.rxpwr_high_alarm); 1271 sfp_hwmon_to_rx_power(value); 1272 return 0; 1273 1274 case hwmon_power_lcrit_alarm: 1275 err = sfp_read(sfp, true, SFP_ALARM1, &status, sizeof(status)); 1276 if (err < 0) 1277 return err; 1278 1279 *value = !!(status & SFP_ALARM1_RXPWR_LOW); 1280 return 0; 1281 1282 case hwmon_power_min_alarm: 1283 err = sfp_read(sfp, true, SFP_WARN1, &status, sizeof(status)); 1284 if (err < 0) 1285 return err; 1286 1287 *value = !!(status & SFP_WARN1_RXPWR_LOW); 1288 return 0; 1289 1290 case hwmon_power_max_alarm: 1291 err = sfp_read(sfp, true, SFP_WARN1, &status, sizeof(status)); 1292 if (err < 0) 1293 return err; 1294 1295 *value = !!(status & SFP_WARN1_RXPWR_HIGH); 1296 return 0; 1297 1298 case hwmon_power_crit_alarm: 1299 err = sfp_read(sfp, true, SFP_ALARM1, &status, sizeof(status)); 1300 if (err < 0) 1301 return err; 1302 1303 *value = !!(status & SFP_ALARM1_RXPWR_HIGH); 1304 return 0; 1305 default: 1306 return -EOPNOTSUPP; 1307 } 1308 1309 return -EOPNOTSUPP; 1310 } 1311 1312 static int sfp_hwmon_read(struct device *dev, enum hwmon_sensor_types type, 1313 u32 attr, int channel, long *value) 1314 { 1315 struct sfp *sfp = dev_get_drvdata(dev); 1316 1317 switch (type) { 1318 case hwmon_temp: 1319 return sfp_hwmon_temp(sfp, attr, value); 1320 case hwmon_in: 1321 return sfp_hwmon_vcc(sfp, attr, value); 1322 case hwmon_curr: 1323 return sfp_hwmon_bias(sfp, attr, value); 1324 case hwmon_power: 1325 switch (channel) { 1326 case 0: 1327 return sfp_hwmon_tx_power(sfp, attr, value); 1328 case 1: 1329 return sfp_hwmon_rx_power(sfp, attr, value); 1330 default: 1331 return -EOPNOTSUPP; 1332 } 1333 default: 1334 return -EOPNOTSUPP; 1335 } 1336 } 1337 1338 static const char *const sfp_hwmon_power_labels[] = { 1339 "TX_power", 1340 "RX_power", 1341 }; 1342 1343 static int sfp_hwmon_read_string(struct device *dev, 1344 enum hwmon_sensor_types type, 1345 u32 attr, int channel, const char **str) 1346 { 1347 switch (type) { 1348 case hwmon_curr: 1349 switch (attr) { 1350 case hwmon_curr_label: 1351 *str = "bias"; 1352 return 0; 1353 default: 1354 return -EOPNOTSUPP; 1355 } 1356 break; 1357 case hwmon_temp: 1358 switch (attr) { 1359 case hwmon_temp_label: 1360 *str = "temperature"; 1361 return 0; 1362 default: 1363 return -EOPNOTSUPP; 1364 } 1365 break; 1366 case hwmon_in: 1367 switch (attr) { 1368 case hwmon_in_label: 1369 *str = "VCC"; 1370 return 0; 1371 default: 1372 return -EOPNOTSUPP; 1373 } 1374 break; 1375 case hwmon_power: 1376 switch (attr) { 1377 case hwmon_power_label: 1378 *str = sfp_hwmon_power_labels[channel]; 1379 return 0; 1380 default: 1381 return -EOPNOTSUPP; 1382 } 1383 break; 1384 default: 1385 return -EOPNOTSUPP; 1386 } 1387 1388 return -EOPNOTSUPP; 1389 } 1390 1391 static const struct hwmon_ops sfp_hwmon_ops = { 1392 .is_visible = sfp_hwmon_is_visible, 1393 .read = sfp_hwmon_read, 1394 .read_string = sfp_hwmon_read_string, 1395 }; 1396 1397 static const struct hwmon_channel_info * const sfp_hwmon_info[] = { 1398 HWMON_CHANNEL_INFO(chip, 1399 HWMON_C_REGISTER_TZ), 1400 HWMON_CHANNEL_INFO(in, 1401 HWMON_I_INPUT | 1402 HWMON_I_MAX | HWMON_I_MIN | 1403 HWMON_I_MAX_ALARM | HWMON_I_MIN_ALARM | 1404 HWMON_I_CRIT | HWMON_I_LCRIT | 1405 HWMON_I_CRIT_ALARM | HWMON_I_LCRIT_ALARM | 1406 HWMON_I_LABEL), 1407 HWMON_CHANNEL_INFO(temp, 1408 HWMON_T_INPUT | 1409 HWMON_T_MAX | HWMON_T_MIN | 1410 HWMON_T_MAX_ALARM | HWMON_T_MIN_ALARM | 1411 HWMON_T_CRIT | HWMON_T_LCRIT | 1412 HWMON_T_CRIT_ALARM | HWMON_T_LCRIT_ALARM | 1413 HWMON_T_LABEL), 1414 HWMON_CHANNEL_INFO(curr, 1415 HWMON_C_INPUT | 1416 HWMON_C_MAX | HWMON_C_MIN | 1417 HWMON_C_MAX_ALARM | HWMON_C_MIN_ALARM | 1418 HWMON_C_CRIT | HWMON_C_LCRIT | 1419 HWMON_C_CRIT_ALARM | HWMON_C_LCRIT_ALARM | 1420 HWMON_C_LABEL), 1421 HWMON_CHANNEL_INFO(power, 1422 /* Transmit power */ 1423 HWMON_P_INPUT | 1424 HWMON_P_MAX | HWMON_P_MIN | 1425 HWMON_P_MAX_ALARM | HWMON_P_MIN_ALARM | 1426 HWMON_P_CRIT | HWMON_P_LCRIT | 1427 HWMON_P_CRIT_ALARM | HWMON_P_LCRIT_ALARM | 1428 HWMON_P_LABEL, 1429 /* Receive power */ 1430 HWMON_P_INPUT | 1431 HWMON_P_MAX | HWMON_P_MIN | 1432 HWMON_P_MAX_ALARM | HWMON_P_MIN_ALARM | 1433 HWMON_P_CRIT | HWMON_P_LCRIT | 1434 HWMON_P_CRIT_ALARM | HWMON_P_LCRIT_ALARM | 1435 HWMON_P_LABEL), 1436 NULL, 1437 }; 1438 1439 static const struct hwmon_chip_info sfp_hwmon_chip_info = { 1440 .ops = &sfp_hwmon_ops, 1441 .info = sfp_hwmon_info, 1442 }; 1443 1444 static void sfp_hwmon_probe(struct work_struct *work) 1445 { 1446 struct sfp *sfp = container_of(work, struct sfp, hwmon_probe.work); 1447 int err; 1448 1449 /* hwmon interface needs to access 16bit registers in atomic way to 1450 * guarantee coherency of the diagnostic monitoring data. If it is not 1451 * possible to guarantee coherency because EEPROM is broken in such way 1452 * that does not support atomic 16bit read operation then we have to 1453 * skip registration of hwmon device. 1454 */ 1455 if (sfp->i2c_block_size < 2) { 1456 dev_info(sfp->dev, 1457 "skipping hwmon device registration due to broken EEPROM\n"); 1458 dev_info(sfp->dev, 1459 "diagnostic EEPROM area cannot be read atomically to guarantee data coherency\n"); 1460 return; 1461 } 1462 1463 err = sfp_read(sfp, true, 0, &sfp->diag, sizeof(sfp->diag)); 1464 if (err < 0) { 1465 if (sfp->hwmon_tries--) { 1466 mod_delayed_work(system_wq, &sfp->hwmon_probe, 1467 T_PROBE_RETRY_SLOW); 1468 } else { 1469 dev_warn(sfp->dev, "hwmon probe failed: %pe\n", 1470 ERR_PTR(err)); 1471 } 1472 return; 1473 } 1474 1475 sfp->hwmon_name = hwmon_sanitize_name(dev_name(sfp->dev)); 1476 if (IS_ERR(sfp->hwmon_name)) { 1477 dev_err(sfp->dev, "out of memory for hwmon name\n"); 1478 return; 1479 } 1480 1481 sfp->hwmon_dev = hwmon_device_register_with_info(sfp->dev, 1482 sfp->hwmon_name, sfp, 1483 &sfp_hwmon_chip_info, 1484 NULL); 1485 if (IS_ERR(sfp->hwmon_dev)) 1486 dev_err(sfp->dev, "failed to register hwmon device: %ld\n", 1487 PTR_ERR(sfp->hwmon_dev)); 1488 } 1489 1490 static int sfp_hwmon_insert(struct sfp *sfp) 1491 { 1492 if (sfp->have_a2 && sfp->id.ext.diagmon & SFP_DIAGMON_DDM) { 1493 mod_delayed_work(system_wq, &sfp->hwmon_probe, 1); 1494 sfp->hwmon_tries = R_PROBE_RETRY_SLOW; 1495 } 1496 1497 return 0; 1498 } 1499 1500 static void sfp_hwmon_remove(struct sfp *sfp) 1501 { 1502 cancel_delayed_work_sync(&sfp->hwmon_probe); 1503 if (!IS_ERR_OR_NULL(sfp->hwmon_dev)) { 1504 hwmon_device_unregister(sfp->hwmon_dev); 1505 sfp->hwmon_dev = NULL; 1506 kfree(sfp->hwmon_name); 1507 } 1508 } 1509 1510 static int sfp_hwmon_init(struct sfp *sfp) 1511 { 1512 INIT_DELAYED_WORK(&sfp->hwmon_probe, sfp_hwmon_probe); 1513 1514 return 0; 1515 } 1516 1517 static void sfp_hwmon_exit(struct sfp *sfp) 1518 { 1519 cancel_delayed_work_sync(&sfp->hwmon_probe); 1520 } 1521 #else 1522 static int sfp_hwmon_insert(struct sfp *sfp) 1523 { 1524 return 0; 1525 } 1526 1527 static void sfp_hwmon_remove(struct sfp *sfp) 1528 { 1529 } 1530 1531 static int sfp_hwmon_init(struct sfp *sfp) 1532 { 1533 return 0; 1534 } 1535 1536 static void sfp_hwmon_exit(struct sfp *sfp) 1537 { 1538 } 1539 #endif 1540 1541 /* Helpers */ 1542 static void sfp_module_tx_disable(struct sfp *sfp) 1543 { 1544 dev_dbg(sfp->dev, "tx disable %u -> %u\n", 1545 sfp->state & SFP_F_TX_DISABLE ? 1 : 0, 1); 1546 sfp_mod_state(sfp, SFP_F_TX_DISABLE, SFP_F_TX_DISABLE); 1547 } 1548 1549 static void sfp_module_tx_enable(struct sfp *sfp) 1550 { 1551 dev_dbg(sfp->dev, "tx disable %u -> %u\n", 1552 sfp->state & SFP_F_TX_DISABLE ? 1 : 0, 0); 1553 sfp_mod_state(sfp, SFP_F_TX_DISABLE, 0); 1554 } 1555 1556 #if IS_ENABLED(CONFIG_DEBUG_FS) 1557 static int sfp_debug_state_show(struct seq_file *s, void *data) 1558 { 1559 struct sfp *sfp = s->private; 1560 1561 seq_printf(s, "Module state: %s\n", 1562 mod_state_to_str(sfp->sm_mod_state)); 1563 seq_printf(s, "Module probe attempts: %d %d\n", 1564 R_PROBE_RETRY_INIT - sfp->sm_mod_tries_init, 1565 R_PROBE_RETRY_SLOW - sfp->sm_mod_tries); 1566 seq_printf(s, "Device state: %s\n", 1567 dev_state_to_str(sfp->sm_dev_state)); 1568 seq_printf(s, "Main state: %s\n", 1569 sm_state_to_str(sfp->sm_state)); 1570 seq_printf(s, "Fault recovery remaining retries: %d\n", 1571 sfp->sm_fault_retries); 1572 seq_printf(s, "PHY probe remaining retries: %d\n", 1573 sfp->sm_phy_retries); 1574 seq_printf(s, "moddef0: %d\n", !!(sfp->state & SFP_F_PRESENT)); 1575 seq_printf(s, "rx_los: %d\n", !!(sfp->state & SFP_F_LOS)); 1576 seq_printf(s, "tx_fault: %d\n", !!(sfp->state & SFP_F_TX_FAULT)); 1577 seq_printf(s, "tx_disable: %d\n", !!(sfp->state & SFP_F_TX_DISABLE)); 1578 return 0; 1579 } 1580 DEFINE_SHOW_ATTRIBUTE(sfp_debug_state); 1581 1582 static void sfp_debugfs_init(struct sfp *sfp) 1583 { 1584 sfp->debugfs_dir = debugfs_create_dir(dev_name(sfp->dev), NULL); 1585 1586 debugfs_create_file("state", 0600, sfp->debugfs_dir, sfp, 1587 &sfp_debug_state_fops); 1588 } 1589 1590 static void sfp_debugfs_exit(struct sfp *sfp) 1591 { 1592 debugfs_remove_recursive(sfp->debugfs_dir); 1593 } 1594 #else 1595 static void sfp_debugfs_init(struct sfp *sfp) 1596 { 1597 } 1598 1599 static void sfp_debugfs_exit(struct sfp *sfp) 1600 { 1601 } 1602 #endif 1603 1604 static void sfp_module_tx_fault_reset(struct sfp *sfp) 1605 { 1606 unsigned int state = sfp->state; 1607 1608 if (state & SFP_F_TX_DISABLE) 1609 return; 1610 1611 sfp_set_state(sfp, state | SFP_F_TX_DISABLE); 1612 1613 udelay(T_RESET_US); 1614 1615 sfp_set_state(sfp, state); 1616 } 1617 1618 /* SFP state machine */ 1619 static void sfp_sm_set_timer(struct sfp *sfp, unsigned int timeout) 1620 { 1621 if (timeout) 1622 mod_delayed_work(system_power_efficient_wq, &sfp->timeout, 1623 timeout); 1624 else 1625 cancel_delayed_work(&sfp->timeout); 1626 } 1627 1628 static void sfp_sm_next(struct sfp *sfp, unsigned int state, 1629 unsigned int timeout) 1630 { 1631 sfp->sm_state = state; 1632 sfp_sm_set_timer(sfp, timeout); 1633 } 1634 1635 static void sfp_sm_mod_next(struct sfp *sfp, unsigned int state, 1636 unsigned int timeout) 1637 { 1638 sfp->sm_mod_state = state; 1639 sfp_sm_set_timer(sfp, timeout); 1640 } 1641 1642 static void sfp_sm_phy_detach(struct sfp *sfp) 1643 { 1644 sfp_remove_phy(sfp->sfp_bus); 1645 phy_device_remove(sfp->mod_phy); 1646 phy_device_free(sfp->mod_phy); 1647 sfp->mod_phy = NULL; 1648 } 1649 1650 static int sfp_sm_probe_phy(struct sfp *sfp, int addr, bool is_c45) 1651 { 1652 struct phy_device *phy; 1653 int err; 1654 1655 phy = get_phy_device(sfp->i2c_mii, addr, is_c45); 1656 if (phy == ERR_PTR(-ENODEV)) 1657 return PTR_ERR(phy); 1658 if (IS_ERR(phy)) { 1659 dev_err(sfp->dev, "mdiobus scan returned %pe\n", phy); 1660 return PTR_ERR(phy); 1661 } 1662 1663 err = phy_device_register(phy); 1664 if (err) { 1665 phy_device_free(phy); 1666 dev_err(sfp->dev, "phy_device_register failed: %pe\n", 1667 ERR_PTR(err)); 1668 return err; 1669 } 1670 1671 err = sfp_add_phy(sfp->sfp_bus, phy); 1672 if (err) { 1673 phy_device_remove(phy); 1674 phy_device_free(phy); 1675 dev_err(sfp->dev, "sfp_add_phy failed: %pe\n", ERR_PTR(err)); 1676 return err; 1677 } 1678 1679 sfp->mod_phy = phy; 1680 1681 return 0; 1682 } 1683 1684 static void sfp_sm_link_up(struct sfp *sfp) 1685 { 1686 sfp_link_up(sfp->sfp_bus); 1687 sfp_sm_next(sfp, SFP_S_LINK_UP, 0); 1688 } 1689 1690 static void sfp_sm_link_down(struct sfp *sfp) 1691 { 1692 sfp_link_down(sfp->sfp_bus); 1693 } 1694 1695 static void sfp_sm_link_check_los(struct sfp *sfp) 1696 { 1697 const __be16 los_inverted = cpu_to_be16(SFP_OPTIONS_LOS_INVERTED); 1698 const __be16 los_normal = cpu_to_be16(SFP_OPTIONS_LOS_NORMAL); 1699 __be16 los_options = sfp->id.ext.options & (los_inverted | los_normal); 1700 bool los = false; 1701 1702 /* If neither SFP_OPTIONS_LOS_INVERTED nor SFP_OPTIONS_LOS_NORMAL 1703 * are set, we assume that no LOS signal is available. If both are 1704 * set, we assume LOS is not implemented (and is meaningless.) 1705 */ 1706 if (los_options == los_inverted) 1707 los = !(sfp->state & SFP_F_LOS); 1708 else if (los_options == los_normal) 1709 los = !!(sfp->state & SFP_F_LOS); 1710 1711 if (los) 1712 sfp_sm_next(sfp, SFP_S_WAIT_LOS, 0); 1713 else 1714 sfp_sm_link_up(sfp); 1715 } 1716 1717 static bool sfp_los_event_active(struct sfp *sfp, unsigned int event) 1718 { 1719 const __be16 los_inverted = cpu_to_be16(SFP_OPTIONS_LOS_INVERTED); 1720 const __be16 los_normal = cpu_to_be16(SFP_OPTIONS_LOS_NORMAL); 1721 __be16 los_options = sfp->id.ext.options & (los_inverted | los_normal); 1722 1723 return (los_options == los_inverted && event == SFP_E_LOS_LOW) || 1724 (los_options == los_normal && event == SFP_E_LOS_HIGH); 1725 } 1726 1727 static bool sfp_los_event_inactive(struct sfp *sfp, unsigned int event) 1728 { 1729 const __be16 los_inverted = cpu_to_be16(SFP_OPTIONS_LOS_INVERTED); 1730 const __be16 los_normal = cpu_to_be16(SFP_OPTIONS_LOS_NORMAL); 1731 __be16 los_options = sfp->id.ext.options & (los_inverted | los_normal); 1732 1733 return (los_options == los_inverted && event == SFP_E_LOS_HIGH) || 1734 (los_options == los_normal && event == SFP_E_LOS_LOW); 1735 } 1736 1737 static void sfp_sm_fault(struct sfp *sfp, unsigned int next_state, bool warn) 1738 { 1739 if (sfp->sm_fault_retries && !--sfp->sm_fault_retries) { 1740 dev_err(sfp->dev, 1741 "module persistently indicates fault, disabling\n"); 1742 sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0); 1743 } else { 1744 if (warn) 1745 dev_err(sfp->dev, "module transmit fault indicated\n"); 1746 1747 sfp_sm_next(sfp, next_state, T_FAULT_RECOVER); 1748 } 1749 } 1750 1751 static int sfp_sm_add_mdio_bus(struct sfp *sfp) 1752 { 1753 if (sfp->mdio_protocol != MDIO_I2C_NONE) 1754 return sfp_i2c_mdiobus_create(sfp); 1755 1756 return 0; 1757 } 1758 1759 /* Probe a SFP for a PHY device if the module supports copper - the PHY 1760 * normally sits at I2C bus address 0x56, and may either be a clause 22 1761 * or clause 45 PHY. 1762 * 1763 * Clause 22 copper SFP modules normally operate in Cisco SGMII mode with 1764 * negotiation enabled, but some may be in 1000base-X - which is for the 1765 * PHY driver to determine. 1766 * 1767 * Clause 45 copper SFP+ modules (10G) appear to switch their interface 1768 * mode according to the negotiated line speed. 1769 */ 1770 static int sfp_sm_probe_for_phy(struct sfp *sfp) 1771 { 1772 int err = 0; 1773 1774 switch (sfp->mdio_protocol) { 1775 case MDIO_I2C_NONE: 1776 break; 1777 1778 case MDIO_I2C_MARVELL_C22: 1779 err = sfp_sm_probe_phy(sfp, SFP_PHY_ADDR, false); 1780 break; 1781 1782 case MDIO_I2C_C45: 1783 err = sfp_sm_probe_phy(sfp, SFP_PHY_ADDR, true); 1784 break; 1785 1786 case MDIO_I2C_ROLLBALL: 1787 err = sfp_sm_probe_phy(sfp, SFP_PHY_ADDR_ROLLBALL, true); 1788 break; 1789 } 1790 1791 return err; 1792 } 1793 1794 static int sfp_module_parse_power(struct sfp *sfp) 1795 { 1796 u32 power_mW = 1000; 1797 bool supports_a2; 1798 1799 if (sfp->id.ext.sff8472_compliance >= SFP_SFF8472_COMPLIANCE_REV10_2 && 1800 sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_POWER_DECL)) 1801 power_mW = 1500; 1802 /* Added in Rev 11.9, but there is no compliance code for this */ 1803 if (sfp->id.ext.sff8472_compliance >= SFP_SFF8472_COMPLIANCE_REV11_4 && 1804 sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_HIGH_POWER_LEVEL)) 1805 power_mW = 2000; 1806 1807 /* Power level 1 modules (max. 1W) are always supported. */ 1808 if (power_mW <= 1000) { 1809 sfp->module_power_mW = power_mW; 1810 return 0; 1811 } 1812 1813 supports_a2 = sfp->id.ext.sff8472_compliance != 1814 SFP_SFF8472_COMPLIANCE_NONE || 1815 sfp->id.ext.diagmon & SFP_DIAGMON_DDM; 1816 1817 if (power_mW > sfp->max_power_mW) { 1818 /* Module power specification exceeds the allowed maximum. */ 1819 if (!supports_a2) { 1820 /* The module appears not to implement bus address 1821 * 0xa2, so assume that the module powers up in the 1822 * indicated mode. 1823 */ 1824 dev_err(sfp->dev, 1825 "Host does not support %u.%uW modules\n", 1826 power_mW / 1000, (power_mW / 100) % 10); 1827 return -EINVAL; 1828 } else { 1829 dev_warn(sfp->dev, 1830 "Host does not support %u.%uW modules, module left in power mode 1\n", 1831 power_mW / 1000, (power_mW / 100) % 10); 1832 return 0; 1833 } 1834 } 1835 1836 if (!supports_a2) { 1837 /* The module power level is below the host maximum and the 1838 * module appears not to implement bus address 0xa2, so assume 1839 * that the module powers up in the indicated mode. 1840 */ 1841 return 0; 1842 } 1843 1844 /* If the module requires a higher power mode, but also requires 1845 * an address change sequence, warn the user that the module may 1846 * not be functional. 1847 */ 1848 if (sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE) { 1849 dev_warn(sfp->dev, 1850 "Address Change Sequence not supported but module requires %u.%uW, module may not be functional\n", 1851 power_mW / 1000, (power_mW / 100) % 10); 1852 return 0; 1853 } 1854 1855 sfp->module_power_mW = power_mW; 1856 1857 return 0; 1858 } 1859 1860 static int sfp_sm_mod_hpower(struct sfp *sfp, bool enable) 1861 { 1862 int err; 1863 1864 err = sfp_modify_u8(sfp, true, SFP_EXT_STATUS, 1865 SFP_EXT_STATUS_PWRLVL_SELECT, 1866 enable ? SFP_EXT_STATUS_PWRLVL_SELECT : 0); 1867 if (err != sizeof(u8)) { 1868 dev_err(sfp->dev, "failed to %sable high power: %pe\n", 1869 enable ? "en" : "dis", ERR_PTR(err)); 1870 return -EAGAIN; 1871 } 1872 1873 if (enable) 1874 dev_info(sfp->dev, "Module switched to %u.%uW power level\n", 1875 sfp->module_power_mW / 1000, 1876 (sfp->module_power_mW / 100) % 10); 1877 1878 return 0; 1879 } 1880 1881 /* GPON modules based on Realtek RTL8672 and RTL9601C chips (e.g. V-SOL 1882 * V2801F, CarlitoxxPro CPGOS03-0490, Ubiquiti U-Fiber Instant, ...) do 1883 * not support multibyte reads from the EEPROM. Each multi-byte read 1884 * operation returns just one byte of EEPROM followed by zeros. There is 1885 * no way to identify which modules are using Realtek RTL8672 and RTL9601C 1886 * chips. Moreover every OEM of V-SOL V2801F module puts its own vendor 1887 * name and vendor id into EEPROM, so there is even no way to detect if 1888 * module is V-SOL V2801F. Therefore check for those zeros in the read 1889 * data and then based on check switch to reading EEPROM to one byte 1890 * at a time. 1891 */ 1892 static bool sfp_id_needs_byte_io(struct sfp *sfp, void *buf, size_t len) 1893 { 1894 size_t i, block_size = sfp->i2c_block_size; 1895 1896 /* Already using byte IO */ 1897 if (block_size == 1) 1898 return false; 1899 1900 for (i = 1; i < len; i += block_size) { 1901 if (memchr_inv(buf + i, '\0', min(block_size - 1, len - i))) 1902 return false; 1903 } 1904 return true; 1905 } 1906 1907 static int sfp_cotsworks_fixup_check(struct sfp *sfp, struct sfp_eeprom_id *id) 1908 { 1909 u8 check; 1910 int err; 1911 1912 if (id->base.phys_id != SFF8024_ID_SFF_8472 || 1913 id->base.phys_ext_id != SFP_PHYS_EXT_ID_SFP || 1914 id->base.connector != SFF8024_CONNECTOR_LC) { 1915 dev_warn(sfp->dev, "Rewriting fiber module EEPROM with corrected values\n"); 1916 id->base.phys_id = SFF8024_ID_SFF_8472; 1917 id->base.phys_ext_id = SFP_PHYS_EXT_ID_SFP; 1918 id->base.connector = SFF8024_CONNECTOR_LC; 1919 err = sfp_write(sfp, false, SFP_PHYS_ID, &id->base, 3); 1920 if (err != 3) { 1921 dev_err(sfp->dev, 1922 "Failed to rewrite module EEPROM: %pe\n", 1923 ERR_PTR(err)); 1924 return err; 1925 } 1926 1927 /* Cotsworks modules have been found to require a delay between write operations. */ 1928 mdelay(50); 1929 1930 /* Update base structure checksum */ 1931 check = sfp_check(&id->base, sizeof(id->base) - 1); 1932 err = sfp_write(sfp, false, SFP_CC_BASE, &check, 1); 1933 if (err != 1) { 1934 dev_err(sfp->dev, 1935 "Failed to update base structure checksum in fiber module EEPROM: %pe\n", 1936 ERR_PTR(err)); 1937 return err; 1938 } 1939 } 1940 return 0; 1941 } 1942 1943 static int sfp_module_parse_sff8472(struct sfp *sfp) 1944 { 1945 /* If the module requires address swap mode, warn about it */ 1946 if (sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE) 1947 dev_warn(sfp->dev, 1948 "module address swap to access page 0xA2 is not supported.\n"); 1949 else 1950 sfp->have_a2 = true; 1951 1952 return 0; 1953 } 1954 1955 static int sfp_sm_mod_probe(struct sfp *sfp, bool report) 1956 { 1957 /* SFP module inserted - read I2C data */ 1958 struct sfp_eeprom_id id; 1959 bool cotsworks_sfbg; 1960 bool cotsworks; 1961 u8 check; 1962 int ret; 1963 1964 sfp->i2c_block_size = SFP_EEPROM_BLOCK_SIZE; 1965 1966 ret = sfp_read(sfp, false, 0, &id.base, sizeof(id.base)); 1967 if (ret < 0) { 1968 if (report) 1969 dev_err(sfp->dev, "failed to read EEPROM: %pe\n", 1970 ERR_PTR(ret)); 1971 return -EAGAIN; 1972 } 1973 1974 if (ret != sizeof(id.base)) { 1975 dev_err(sfp->dev, "EEPROM short read: %pe\n", ERR_PTR(ret)); 1976 return -EAGAIN; 1977 } 1978 1979 /* Some SFP modules (e.g. Nokia 3FE46541AA) lock up if read from 1980 * address 0x51 is just one byte at a time. Also SFF-8472 requires 1981 * that EEPROM supports atomic 16bit read operation for diagnostic 1982 * fields, so do not switch to one byte reading at a time unless it 1983 * is really required and we have no other option. 1984 */ 1985 if (sfp_id_needs_byte_io(sfp, &id.base, sizeof(id.base))) { 1986 dev_info(sfp->dev, 1987 "Detected broken RTL8672/RTL9601C emulated EEPROM\n"); 1988 dev_info(sfp->dev, 1989 "Switching to reading EEPROM to one byte at a time\n"); 1990 sfp->i2c_block_size = 1; 1991 1992 ret = sfp_read(sfp, false, 0, &id.base, sizeof(id.base)); 1993 if (ret < 0) { 1994 if (report) 1995 dev_err(sfp->dev, 1996 "failed to read EEPROM: %pe\n", 1997 ERR_PTR(ret)); 1998 return -EAGAIN; 1999 } 2000 2001 if (ret != sizeof(id.base)) { 2002 dev_err(sfp->dev, "EEPROM short read: %pe\n", 2003 ERR_PTR(ret)); 2004 return -EAGAIN; 2005 } 2006 } 2007 2008 /* Cotsworks do not seem to update the checksums when they 2009 * do the final programming with the final module part number, 2010 * serial number and date code. 2011 */ 2012 cotsworks = !memcmp(id.base.vendor_name, "COTSWORKS ", 16); 2013 cotsworks_sfbg = !memcmp(id.base.vendor_pn, "SFBG", 4); 2014 2015 /* Cotsworks SFF module EEPROM do not always have valid phys_id, 2016 * phys_ext_id, and connector bytes. Rewrite SFF EEPROM bytes if 2017 * Cotsworks PN matches and bytes are not correct. 2018 */ 2019 if (cotsworks && cotsworks_sfbg) { 2020 ret = sfp_cotsworks_fixup_check(sfp, &id); 2021 if (ret < 0) 2022 return ret; 2023 } 2024 2025 /* Validate the checksum over the base structure */ 2026 check = sfp_check(&id.base, sizeof(id.base) - 1); 2027 if (check != id.base.cc_base) { 2028 if (cotsworks) { 2029 dev_warn(sfp->dev, 2030 "EEPROM base structure checksum failure (0x%02x != 0x%02x)\n", 2031 check, id.base.cc_base); 2032 } else { 2033 dev_err(sfp->dev, 2034 "EEPROM base structure checksum failure: 0x%02x != 0x%02x\n", 2035 check, id.base.cc_base); 2036 print_hex_dump(KERN_ERR, "sfp EE: ", DUMP_PREFIX_OFFSET, 2037 16, 1, &id, sizeof(id), true); 2038 return -EINVAL; 2039 } 2040 } 2041 2042 ret = sfp_read(sfp, false, SFP_CC_BASE + 1, &id.ext, sizeof(id.ext)); 2043 if (ret < 0) { 2044 if (report) 2045 dev_err(sfp->dev, "failed to read EEPROM: %pe\n", 2046 ERR_PTR(ret)); 2047 return -EAGAIN; 2048 } 2049 2050 if (ret != sizeof(id.ext)) { 2051 dev_err(sfp->dev, "EEPROM short read: %pe\n", ERR_PTR(ret)); 2052 return -EAGAIN; 2053 } 2054 2055 check = sfp_check(&id.ext, sizeof(id.ext) - 1); 2056 if (check != id.ext.cc_ext) { 2057 if (cotsworks) { 2058 dev_warn(sfp->dev, 2059 "EEPROM extended structure checksum failure (0x%02x != 0x%02x)\n", 2060 check, id.ext.cc_ext); 2061 } else { 2062 dev_err(sfp->dev, 2063 "EEPROM extended structure checksum failure: 0x%02x != 0x%02x\n", 2064 check, id.ext.cc_ext); 2065 print_hex_dump(KERN_ERR, "sfp EE: ", DUMP_PREFIX_OFFSET, 2066 16, 1, &id, sizeof(id), true); 2067 memset(&id.ext, 0, sizeof(id.ext)); 2068 } 2069 } 2070 2071 sfp->id = id; 2072 2073 dev_info(sfp->dev, "module %.*s %.*s rev %.*s sn %.*s dc %.*s\n", 2074 (int)sizeof(id.base.vendor_name), id.base.vendor_name, 2075 (int)sizeof(id.base.vendor_pn), id.base.vendor_pn, 2076 (int)sizeof(id.base.vendor_rev), id.base.vendor_rev, 2077 (int)sizeof(id.ext.vendor_sn), id.ext.vendor_sn, 2078 (int)sizeof(id.ext.datecode), id.ext.datecode); 2079 2080 /* Check whether we support this module */ 2081 if (!sfp->type->module_supported(&id)) { 2082 dev_err(sfp->dev, 2083 "module is not supported - phys id 0x%02x 0x%02x\n", 2084 sfp->id.base.phys_id, sfp->id.base.phys_ext_id); 2085 return -EINVAL; 2086 } 2087 2088 if (sfp->id.ext.sff8472_compliance != SFP_SFF8472_COMPLIANCE_NONE) { 2089 ret = sfp_module_parse_sff8472(sfp); 2090 if (ret < 0) 2091 return ret; 2092 } 2093 2094 /* Parse the module power requirement */ 2095 ret = sfp_module_parse_power(sfp); 2096 if (ret < 0) 2097 return ret; 2098 2099 /* Initialise state bits to use from hardware */ 2100 sfp->state_hw_mask = SFP_F_PRESENT; 2101 if (sfp->gpio[GPIO_TX_DISABLE]) 2102 sfp->state_hw_mask |= SFP_F_TX_DISABLE; 2103 if (sfp->gpio[GPIO_TX_FAULT]) 2104 sfp->state_hw_mask |= SFP_F_TX_FAULT; 2105 if (sfp->gpio[GPIO_LOS]) 2106 sfp->state_hw_mask |= SFP_F_LOS; 2107 2108 sfp->module_t_start_up = T_START_UP; 2109 sfp->module_t_wait = T_WAIT; 2110 2111 sfp->tx_fault_ignore = false; 2112 2113 if (sfp->id.base.extended_cc == SFF8024_ECC_10GBASE_T_SFI || 2114 sfp->id.base.extended_cc == SFF8024_ECC_10GBASE_T_SR || 2115 sfp->id.base.extended_cc == SFF8024_ECC_5GBASE_T || 2116 sfp->id.base.extended_cc == SFF8024_ECC_2_5GBASE_T) 2117 sfp->mdio_protocol = MDIO_I2C_C45; 2118 else if (sfp->id.base.e1000_base_t) 2119 sfp->mdio_protocol = MDIO_I2C_MARVELL_C22; 2120 else 2121 sfp->mdio_protocol = MDIO_I2C_NONE; 2122 2123 sfp->quirk = sfp_lookup_quirk(&id); 2124 if (sfp->quirk && sfp->quirk->fixup) 2125 sfp->quirk->fixup(sfp); 2126 2127 return 0; 2128 } 2129 2130 static void sfp_sm_mod_remove(struct sfp *sfp) 2131 { 2132 if (sfp->sm_mod_state > SFP_MOD_WAITDEV) 2133 sfp_module_remove(sfp->sfp_bus); 2134 2135 sfp_hwmon_remove(sfp); 2136 2137 memset(&sfp->id, 0, sizeof(sfp->id)); 2138 sfp->module_power_mW = 0; 2139 sfp->have_a2 = false; 2140 2141 dev_info(sfp->dev, "module removed\n"); 2142 } 2143 2144 /* This state machine tracks the upstream's state */ 2145 static void sfp_sm_device(struct sfp *sfp, unsigned int event) 2146 { 2147 switch (sfp->sm_dev_state) { 2148 default: 2149 if (event == SFP_E_DEV_ATTACH) 2150 sfp->sm_dev_state = SFP_DEV_DOWN; 2151 break; 2152 2153 case SFP_DEV_DOWN: 2154 if (event == SFP_E_DEV_DETACH) 2155 sfp->sm_dev_state = SFP_DEV_DETACHED; 2156 else if (event == SFP_E_DEV_UP) 2157 sfp->sm_dev_state = SFP_DEV_UP; 2158 break; 2159 2160 case SFP_DEV_UP: 2161 if (event == SFP_E_DEV_DETACH) 2162 sfp->sm_dev_state = SFP_DEV_DETACHED; 2163 else if (event == SFP_E_DEV_DOWN) 2164 sfp->sm_dev_state = SFP_DEV_DOWN; 2165 break; 2166 } 2167 } 2168 2169 /* This state machine tracks the insert/remove state of the module, probes 2170 * the on-board EEPROM, and sets up the power level. 2171 */ 2172 static void sfp_sm_module(struct sfp *sfp, unsigned int event) 2173 { 2174 int err; 2175 2176 /* Handle remove event globally, it resets this state machine */ 2177 if (event == SFP_E_REMOVE) { 2178 if (sfp->sm_mod_state > SFP_MOD_PROBE) 2179 sfp_sm_mod_remove(sfp); 2180 sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0); 2181 return; 2182 } 2183 2184 /* Handle device detach globally */ 2185 if (sfp->sm_dev_state < SFP_DEV_DOWN && 2186 sfp->sm_mod_state > SFP_MOD_WAITDEV) { 2187 if (sfp->module_power_mW > 1000 && 2188 sfp->sm_mod_state > SFP_MOD_HPOWER) 2189 sfp_sm_mod_hpower(sfp, false); 2190 sfp_sm_mod_next(sfp, SFP_MOD_WAITDEV, 0); 2191 return; 2192 } 2193 2194 switch (sfp->sm_mod_state) { 2195 default: 2196 if (event == SFP_E_INSERT) { 2197 sfp_sm_mod_next(sfp, SFP_MOD_PROBE, T_SERIAL); 2198 sfp->sm_mod_tries_init = R_PROBE_RETRY_INIT; 2199 sfp->sm_mod_tries = R_PROBE_RETRY_SLOW; 2200 } 2201 break; 2202 2203 case SFP_MOD_PROBE: 2204 /* Wait for T_PROBE_INIT to time out */ 2205 if (event != SFP_E_TIMEOUT) 2206 break; 2207 2208 err = sfp_sm_mod_probe(sfp, sfp->sm_mod_tries == 1); 2209 if (err == -EAGAIN) { 2210 if (sfp->sm_mod_tries_init && 2211 --sfp->sm_mod_tries_init) { 2212 sfp_sm_set_timer(sfp, T_PROBE_RETRY_INIT); 2213 break; 2214 } else if (sfp->sm_mod_tries && --sfp->sm_mod_tries) { 2215 if (sfp->sm_mod_tries == R_PROBE_RETRY_SLOW - 1) 2216 dev_warn(sfp->dev, 2217 "please wait, module slow to respond\n"); 2218 sfp_sm_set_timer(sfp, T_PROBE_RETRY_SLOW); 2219 break; 2220 } 2221 } 2222 if (err < 0) { 2223 sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0); 2224 break; 2225 } 2226 2227 /* Force a poll to re-read the hardware signal state after 2228 * sfp_sm_mod_probe() changed state_hw_mask. 2229 */ 2230 mod_delayed_work(system_wq, &sfp->poll, 1); 2231 2232 err = sfp_hwmon_insert(sfp); 2233 if (err) 2234 dev_warn(sfp->dev, "hwmon probe failed: %pe\n", 2235 ERR_PTR(err)); 2236 2237 sfp_sm_mod_next(sfp, SFP_MOD_WAITDEV, 0); 2238 fallthrough; 2239 case SFP_MOD_WAITDEV: 2240 /* Ensure that the device is attached before proceeding */ 2241 if (sfp->sm_dev_state < SFP_DEV_DOWN) 2242 break; 2243 2244 /* Report the module insertion to the upstream device */ 2245 err = sfp_module_insert(sfp->sfp_bus, &sfp->id, 2246 sfp->quirk); 2247 if (err < 0) { 2248 sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0); 2249 break; 2250 } 2251 2252 /* If this is a power level 1 module, we are done */ 2253 if (sfp->module_power_mW <= 1000) 2254 goto insert; 2255 2256 sfp_sm_mod_next(sfp, SFP_MOD_HPOWER, 0); 2257 fallthrough; 2258 case SFP_MOD_HPOWER: 2259 /* Enable high power mode */ 2260 err = sfp_sm_mod_hpower(sfp, true); 2261 if (err < 0) { 2262 if (err != -EAGAIN) { 2263 sfp_module_remove(sfp->sfp_bus); 2264 sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0); 2265 } else { 2266 sfp_sm_set_timer(sfp, T_PROBE_RETRY_INIT); 2267 } 2268 break; 2269 } 2270 2271 sfp_sm_mod_next(sfp, SFP_MOD_WAITPWR, T_HPOWER_LEVEL); 2272 break; 2273 2274 case SFP_MOD_WAITPWR: 2275 /* Wait for T_HPOWER_LEVEL to time out */ 2276 if (event != SFP_E_TIMEOUT) 2277 break; 2278 2279 insert: 2280 sfp_sm_mod_next(sfp, SFP_MOD_PRESENT, 0); 2281 break; 2282 2283 case SFP_MOD_PRESENT: 2284 case SFP_MOD_ERROR: 2285 break; 2286 } 2287 } 2288 2289 static void sfp_sm_main(struct sfp *sfp, unsigned int event) 2290 { 2291 unsigned long timeout; 2292 int ret; 2293 2294 /* Some events are global */ 2295 if (sfp->sm_state != SFP_S_DOWN && 2296 (sfp->sm_mod_state != SFP_MOD_PRESENT || 2297 sfp->sm_dev_state != SFP_DEV_UP)) { 2298 if (sfp->sm_state == SFP_S_LINK_UP && 2299 sfp->sm_dev_state == SFP_DEV_UP) 2300 sfp_sm_link_down(sfp); 2301 if (sfp->sm_state > SFP_S_INIT) 2302 sfp_module_stop(sfp->sfp_bus); 2303 if (sfp->mod_phy) 2304 sfp_sm_phy_detach(sfp); 2305 if (sfp->i2c_mii) 2306 sfp_i2c_mdiobus_destroy(sfp); 2307 sfp_module_tx_disable(sfp); 2308 sfp_soft_stop_poll(sfp); 2309 sfp_sm_next(sfp, SFP_S_DOWN, 0); 2310 return; 2311 } 2312 2313 /* The main state machine */ 2314 switch (sfp->sm_state) { 2315 case SFP_S_DOWN: 2316 if (sfp->sm_mod_state != SFP_MOD_PRESENT || 2317 sfp->sm_dev_state != SFP_DEV_UP) 2318 break; 2319 2320 /* Only use the soft state bits if we have access to the A2h 2321 * memory, which implies that we have some level of SFF-8472 2322 * compliance. 2323 */ 2324 if (sfp->have_a2) 2325 sfp_soft_start_poll(sfp); 2326 2327 sfp_module_tx_enable(sfp); 2328 2329 /* Initialise the fault clearance retries */ 2330 sfp->sm_fault_retries = N_FAULT_INIT; 2331 2332 /* We need to check the TX_FAULT state, which is not defined 2333 * while TX_DISABLE is asserted. The earliest we want to do 2334 * anything (such as probe for a PHY) is 50ms (or more on 2335 * specific modules). 2336 */ 2337 sfp_sm_next(sfp, SFP_S_WAIT, sfp->module_t_wait); 2338 break; 2339 2340 case SFP_S_WAIT: 2341 if (event != SFP_E_TIMEOUT) 2342 break; 2343 2344 if (sfp->state & SFP_F_TX_FAULT) { 2345 /* Wait up to t_init (SFF-8472) or t_start_up (SFF-8431) 2346 * from the TX_DISABLE deassertion for the module to 2347 * initialise, which is indicated by TX_FAULT 2348 * deasserting. 2349 */ 2350 timeout = sfp->module_t_start_up; 2351 if (timeout > sfp->module_t_wait) 2352 timeout -= sfp->module_t_wait; 2353 else 2354 timeout = 1; 2355 2356 sfp_sm_next(sfp, SFP_S_INIT, timeout); 2357 } else { 2358 /* TX_FAULT is not asserted, assume the module has 2359 * finished initialising. 2360 */ 2361 goto init_done; 2362 } 2363 break; 2364 2365 case SFP_S_INIT: 2366 if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) { 2367 /* TX_FAULT is still asserted after t_init 2368 * or t_start_up, so assume there is a fault. 2369 */ 2370 sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT, 2371 sfp->sm_fault_retries == N_FAULT_INIT); 2372 } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) { 2373 init_done: 2374 /* Create mdiobus and start trying for PHY */ 2375 ret = sfp_sm_add_mdio_bus(sfp); 2376 if (ret < 0) { 2377 sfp_sm_next(sfp, SFP_S_FAIL, 0); 2378 break; 2379 } 2380 sfp->sm_phy_retries = R_PHY_RETRY; 2381 goto phy_probe; 2382 } 2383 break; 2384 2385 case SFP_S_INIT_PHY: 2386 if (event != SFP_E_TIMEOUT) 2387 break; 2388 phy_probe: 2389 /* TX_FAULT deasserted or we timed out with TX_FAULT 2390 * clear. Probe for the PHY and check the LOS state. 2391 */ 2392 ret = sfp_sm_probe_for_phy(sfp); 2393 if (ret == -ENODEV) { 2394 if (--sfp->sm_phy_retries) { 2395 sfp_sm_next(sfp, SFP_S_INIT_PHY, T_PHY_RETRY); 2396 break; 2397 } else { 2398 dev_info(sfp->dev, "no PHY detected\n"); 2399 } 2400 } else if (ret) { 2401 sfp_sm_next(sfp, SFP_S_FAIL, 0); 2402 break; 2403 } 2404 if (sfp_module_start(sfp->sfp_bus)) { 2405 sfp_sm_next(sfp, SFP_S_FAIL, 0); 2406 break; 2407 } 2408 sfp_sm_link_check_los(sfp); 2409 2410 /* Reset the fault retry count */ 2411 sfp->sm_fault_retries = N_FAULT; 2412 break; 2413 2414 case SFP_S_INIT_TX_FAULT: 2415 if (event == SFP_E_TIMEOUT) { 2416 sfp_module_tx_fault_reset(sfp); 2417 sfp_sm_next(sfp, SFP_S_INIT, sfp->module_t_start_up); 2418 } 2419 break; 2420 2421 case SFP_S_WAIT_LOS: 2422 if (event == SFP_E_TX_FAULT) 2423 sfp_sm_fault(sfp, SFP_S_TX_FAULT, true); 2424 else if (sfp_los_event_inactive(sfp, event)) 2425 sfp_sm_link_up(sfp); 2426 break; 2427 2428 case SFP_S_LINK_UP: 2429 if (event == SFP_E_TX_FAULT) { 2430 sfp_sm_link_down(sfp); 2431 sfp_sm_fault(sfp, SFP_S_TX_FAULT, true); 2432 } else if (sfp_los_event_active(sfp, event)) { 2433 sfp_sm_link_down(sfp); 2434 sfp_sm_next(sfp, SFP_S_WAIT_LOS, 0); 2435 } 2436 break; 2437 2438 case SFP_S_TX_FAULT: 2439 if (event == SFP_E_TIMEOUT) { 2440 sfp_module_tx_fault_reset(sfp); 2441 sfp_sm_next(sfp, SFP_S_REINIT, sfp->module_t_start_up); 2442 } 2443 break; 2444 2445 case SFP_S_REINIT: 2446 if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) { 2447 sfp_sm_fault(sfp, SFP_S_TX_FAULT, false); 2448 } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) { 2449 dev_info(sfp->dev, "module transmit fault recovered\n"); 2450 sfp_sm_link_check_los(sfp); 2451 } 2452 break; 2453 2454 case SFP_S_TX_DISABLE: 2455 break; 2456 } 2457 } 2458 2459 static void sfp_sm_event(struct sfp *sfp, unsigned int event) 2460 { 2461 mutex_lock(&sfp->sm_mutex); 2462 2463 dev_dbg(sfp->dev, "SM: enter %s:%s:%s event %s\n", 2464 mod_state_to_str(sfp->sm_mod_state), 2465 dev_state_to_str(sfp->sm_dev_state), 2466 sm_state_to_str(sfp->sm_state), 2467 event_to_str(event)); 2468 2469 sfp_sm_device(sfp, event); 2470 sfp_sm_module(sfp, event); 2471 sfp_sm_main(sfp, event); 2472 2473 dev_dbg(sfp->dev, "SM: exit %s:%s:%s\n", 2474 mod_state_to_str(sfp->sm_mod_state), 2475 dev_state_to_str(sfp->sm_dev_state), 2476 sm_state_to_str(sfp->sm_state)); 2477 2478 mutex_unlock(&sfp->sm_mutex); 2479 } 2480 2481 static void sfp_attach(struct sfp *sfp) 2482 { 2483 sfp_sm_event(sfp, SFP_E_DEV_ATTACH); 2484 } 2485 2486 static void sfp_detach(struct sfp *sfp) 2487 { 2488 sfp_sm_event(sfp, SFP_E_DEV_DETACH); 2489 } 2490 2491 static void sfp_start(struct sfp *sfp) 2492 { 2493 sfp_sm_event(sfp, SFP_E_DEV_UP); 2494 } 2495 2496 static void sfp_stop(struct sfp *sfp) 2497 { 2498 sfp_sm_event(sfp, SFP_E_DEV_DOWN); 2499 } 2500 2501 static int sfp_module_info(struct sfp *sfp, struct ethtool_modinfo *modinfo) 2502 { 2503 /* locking... and check module is present */ 2504 2505 if (sfp->id.ext.sff8472_compliance && 2506 !(sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE)) { 2507 modinfo->type = ETH_MODULE_SFF_8472; 2508 modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN; 2509 } else { 2510 modinfo->type = ETH_MODULE_SFF_8079; 2511 modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN; 2512 } 2513 return 0; 2514 } 2515 2516 static int sfp_module_eeprom(struct sfp *sfp, struct ethtool_eeprom *ee, 2517 u8 *data) 2518 { 2519 unsigned int first, last, len; 2520 int ret; 2521 2522 if (!(sfp->state & SFP_F_PRESENT)) 2523 return -ENODEV; 2524 2525 if (ee->len == 0) 2526 return -EINVAL; 2527 2528 first = ee->offset; 2529 last = ee->offset + ee->len; 2530 if (first < ETH_MODULE_SFF_8079_LEN) { 2531 len = min_t(unsigned int, last, ETH_MODULE_SFF_8079_LEN); 2532 len -= first; 2533 2534 ret = sfp_read(sfp, false, first, data, len); 2535 if (ret < 0) 2536 return ret; 2537 2538 first += len; 2539 data += len; 2540 } 2541 if (first < ETH_MODULE_SFF_8472_LEN && last > ETH_MODULE_SFF_8079_LEN) { 2542 len = min_t(unsigned int, last, ETH_MODULE_SFF_8472_LEN); 2543 len -= first; 2544 first -= ETH_MODULE_SFF_8079_LEN; 2545 2546 ret = sfp_read(sfp, true, first, data, len); 2547 if (ret < 0) 2548 return ret; 2549 } 2550 return 0; 2551 } 2552 2553 static int sfp_module_eeprom_by_page(struct sfp *sfp, 2554 const struct ethtool_module_eeprom *page, 2555 struct netlink_ext_ack *extack) 2556 { 2557 if (!(sfp->state & SFP_F_PRESENT)) 2558 return -ENODEV; 2559 2560 if (page->bank) { 2561 NL_SET_ERR_MSG(extack, "Banks not supported"); 2562 return -EOPNOTSUPP; 2563 } 2564 2565 if (page->page) { 2566 NL_SET_ERR_MSG(extack, "Only page 0 supported"); 2567 return -EOPNOTSUPP; 2568 } 2569 2570 if (page->i2c_address != 0x50 && 2571 page->i2c_address != 0x51) { 2572 NL_SET_ERR_MSG(extack, "Only address 0x50 and 0x51 supported"); 2573 return -EOPNOTSUPP; 2574 } 2575 2576 return sfp_read(sfp, page->i2c_address == 0x51, page->offset, 2577 page->data, page->length); 2578 }; 2579 2580 static const struct sfp_socket_ops sfp_module_ops = { 2581 .attach = sfp_attach, 2582 .detach = sfp_detach, 2583 .start = sfp_start, 2584 .stop = sfp_stop, 2585 .module_info = sfp_module_info, 2586 .module_eeprom = sfp_module_eeprom, 2587 .module_eeprom_by_page = sfp_module_eeprom_by_page, 2588 }; 2589 2590 static void sfp_timeout(struct work_struct *work) 2591 { 2592 struct sfp *sfp = container_of(work, struct sfp, timeout.work); 2593 2594 rtnl_lock(); 2595 sfp_sm_event(sfp, SFP_E_TIMEOUT); 2596 rtnl_unlock(); 2597 } 2598 2599 static void sfp_check_state(struct sfp *sfp) 2600 { 2601 unsigned int state, i, changed; 2602 2603 mutex_lock(&sfp->st_mutex); 2604 state = sfp_get_state(sfp); 2605 changed = state ^ sfp->state; 2606 if (sfp->tx_fault_ignore) 2607 changed &= SFP_F_PRESENT | SFP_F_LOS; 2608 else 2609 changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT; 2610 2611 for (i = 0; i < GPIO_MAX; i++) 2612 if (changed & BIT(i)) 2613 dev_dbg(sfp->dev, "%s %u -> %u\n", gpio_names[i], 2614 !!(sfp->state & BIT(i)), !!(state & BIT(i))); 2615 2616 state |= sfp->state & (SFP_F_TX_DISABLE | SFP_F_RATE_SELECT); 2617 sfp->state = state; 2618 2619 rtnl_lock(); 2620 if (changed & SFP_F_PRESENT) 2621 sfp_sm_event(sfp, state & SFP_F_PRESENT ? 2622 SFP_E_INSERT : SFP_E_REMOVE); 2623 2624 if (changed & SFP_F_TX_FAULT) 2625 sfp_sm_event(sfp, state & SFP_F_TX_FAULT ? 2626 SFP_E_TX_FAULT : SFP_E_TX_CLEAR); 2627 2628 if (changed & SFP_F_LOS) 2629 sfp_sm_event(sfp, state & SFP_F_LOS ? 2630 SFP_E_LOS_HIGH : SFP_E_LOS_LOW); 2631 rtnl_unlock(); 2632 mutex_unlock(&sfp->st_mutex); 2633 } 2634 2635 static irqreturn_t sfp_irq(int irq, void *data) 2636 { 2637 struct sfp *sfp = data; 2638 2639 sfp_check_state(sfp); 2640 2641 return IRQ_HANDLED; 2642 } 2643 2644 static void sfp_poll(struct work_struct *work) 2645 { 2646 struct sfp *sfp = container_of(work, struct sfp, poll.work); 2647 2648 sfp_check_state(sfp); 2649 2650 if (sfp->state_soft_mask & (SFP_F_LOS | SFP_F_TX_FAULT) || 2651 sfp->need_poll) 2652 mod_delayed_work(system_wq, &sfp->poll, poll_jiffies); 2653 } 2654 2655 static struct sfp *sfp_alloc(struct device *dev) 2656 { 2657 struct sfp *sfp; 2658 2659 sfp = kzalloc(sizeof(*sfp), GFP_KERNEL); 2660 if (!sfp) 2661 return ERR_PTR(-ENOMEM); 2662 2663 sfp->dev = dev; 2664 sfp->i2c_block_size = SFP_EEPROM_BLOCK_SIZE; 2665 2666 mutex_init(&sfp->sm_mutex); 2667 mutex_init(&sfp->st_mutex); 2668 INIT_DELAYED_WORK(&sfp->poll, sfp_poll); 2669 INIT_DELAYED_WORK(&sfp->timeout, sfp_timeout); 2670 2671 sfp_hwmon_init(sfp); 2672 2673 return sfp; 2674 } 2675 2676 static void sfp_cleanup(void *data) 2677 { 2678 struct sfp *sfp = data; 2679 2680 sfp_hwmon_exit(sfp); 2681 2682 cancel_delayed_work_sync(&sfp->poll); 2683 cancel_delayed_work_sync(&sfp->timeout); 2684 if (sfp->i2c_mii) { 2685 mdiobus_unregister(sfp->i2c_mii); 2686 mdiobus_free(sfp->i2c_mii); 2687 } 2688 if (sfp->i2c) 2689 i2c_put_adapter(sfp->i2c); 2690 kfree(sfp); 2691 } 2692 2693 static int sfp_i2c_get(struct sfp *sfp) 2694 { 2695 struct fwnode_handle *h; 2696 struct i2c_adapter *i2c; 2697 int err; 2698 2699 h = fwnode_find_reference(dev_fwnode(sfp->dev), "i2c-bus", 0); 2700 if (IS_ERR(h)) { 2701 dev_err(sfp->dev, "missing 'i2c-bus' property\n"); 2702 return -ENODEV; 2703 } 2704 2705 i2c = i2c_get_adapter_by_fwnode(h); 2706 if (!i2c) { 2707 err = -EPROBE_DEFER; 2708 goto put; 2709 } 2710 2711 err = sfp_i2c_configure(sfp, i2c); 2712 if (err) 2713 i2c_put_adapter(i2c); 2714 put: 2715 fwnode_handle_put(h); 2716 return err; 2717 } 2718 2719 static int sfp_probe(struct platform_device *pdev) 2720 { 2721 const struct sff_data *sff; 2722 char *sfp_irq_name; 2723 struct sfp *sfp; 2724 int err, i; 2725 2726 sfp = sfp_alloc(&pdev->dev); 2727 if (IS_ERR(sfp)) 2728 return PTR_ERR(sfp); 2729 2730 platform_set_drvdata(pdev, sfp); 2731 2732 err = devm_add_action_or_reset(sfp->dev, sfp_cleanup, sfp); 2733 if (err < 0) 2734 return err; 2735 2736 sff = device_get_match_data(sfp->dev); 2737 if (!sff) 2738 sff = &sfp_data; 2739 2740 sfp->type = sff; 2741 2742 err = sfp_i2c_get(sfp); 2743 if (err) 2744 return err; 2745 2746 for (i = 0; i < GPIO_MAX; i++) 2747 if (sff->gpios & BIT(i)) { 2748 sfp->gpio[i] = devm_gpiod_get_optional(sfp->dev, 2749 gpio_names[i], gpio_flags[i]); 2750 if (IS_ERR(sfp->gpio[i])) 2751 return PTR_ERR(sfp->gpio[i]); 2752 } 2753 2754 sfp->state_hw_mask = SFP_F_PRESENT; 2755 2756 sfp->get_state = sfp_gpio_get_state; 2757 sfp->set_state = sfp_gpio_set_state; 2758 2759 /* Modules that have no detect signal are always present */ 2760 if (!(sfp->gpio[GPIO_MODDEF0])) 2761 sfp->get_state = sff_gpio_get_state; 2762 2763 device_property_read_u32(&pdev->dev, "maximum-power-milliwatt", 2764 &sfp->max_power_mW); 2765 if (sfp->max_power_mW < 1000) { 2766 if (sfp->max_power_mW) 2767 dev_warn(sfp->dev, 2768 "Firmware bug: host maximum power should be at least 1W\n"); 2769 sfp->max_power_mW = 1000; 2770 } 2771 2772 dev_info(sfp->dev, "Host maximum power %u.%uW\n", 2773 sfp->max_power_mW / 1000, (sfp->max_power_mW / 100) % 10); 2774 2775 /* Get the initial state, and always signal TX disable, 2776 * since the network interface will not be up. 2777 */ 2778 sfp->state = sfp_get_state(sfp) | SFP_F_TX_DISABLE; 2779 2780 if (sfp->gpio[GPIO_RATE_SELECT] && 2781 gpiod_get_value_cansleep(sfp->gpio[GPIO_RATE_SELECT])) 2782 sfp->state |= SFP_F_RATE_SELECT; 2783 sfp_set_state(sfp, sfp->state); 2784 sfp_module_tx_disable(sfp); 2785 if (sfp->state & SFP_F_PRESENT) { 2786 rtnl_lock(); 2787 sfp_sm_event(sfp, SFP_E_INSERT); 2788 rtnl_unlock(); 2789 } 2790 2791 for (i = 0; i < GPIO_MAX; i++) { 2792 if (gpio_flags[i] != GPIOD_IN || !sfp->gpio[i]) 2793 continue; 2794 2795 sfp->gpio_irq[i] = gpiod_to_irq(sfp->gpio[i]); 2796 if (sfp->gpio_irq[i] < 0) { 2797 sfp->gpio_irq[i] = 0; 2798 sfp->need_poll = true; 2799 continue; 2800 } 2801 2802 sfp_irq_name = devm_kasprintf(sfp->dev, GFP_KERNEL, 2803 "%s-%s", dev_name(sfp->dev), 2804 gpio_names[i]); 2805 2806 if (!sfp_irq_name) 2807 return -ENOMEM; 2808 2809 err = devm_request_threaded_irq(sfp->dev, sfp->gpio_irq[i], 2810 NULL, sfp_irq, 2811 IRQF_ONESHOT | 2812 IRQF_TRIGGER_RISING | 2813 IRQF_TRIGGER_FALLING, 2814 sfp_irq_name, sfp); 2815 if (err) { 2816 sfp->gpio_irq[i] = 0; 2817 sfp->need_poll = true; 2818 } 2819 } 2820 2821 if (sfp->need_poll) 2822 mod_delayed_work(system_wq, &sfp->poll, poll_jiffies); 2823 2824 /* We could have an issue in cases no Tx disable pin is available or 2825 * wired as modules using a laser as their light source will continue to 2826 * be active when the fiber is removed. This could be a safety issue and 2827 * we should at least warn the user about that. 2828 */ 2829 if (!sfp->gpio[GPIO_TX_DISABLE]) 2830 dev_warn(sfp->dev, 2831 "No tx_disable pin: SFP modules will always be emitting.\n"); 2832 2833 sfp->sfp_bus = sfp_register_socket(sfp->dev, sfp, &sfp_module_ops); 2834 if (!sfp->sfp_bus) 2835 return -ENOMEM; 2836 2837 sfp_debugfs_init(sfp); 2838 2839 return 0; 2840 } 2841 2842 static int sfp_remove(struct platform_device *pdev) 2843 { 2844 struct sfp *sfp = platform_get_drvdata(pdev); 2845 2846 sfp_debugfs_exit(sfp); 2847 sfp_unregister_socket(sfp->sfp_bus); 2848 2849 rtnl_lock(); 2850 sfp_sm_event(sfp, SFP_E_REMOVE); 2851 rtnl_unlock(); 2852 2853 return 0; 2854 } 2855 2856 static void sfp_shutdown(struct platform_device *pdev) 2857 { 2858 struct sfp *sfp = platform_get_drvdata(pdev); 2859 int i; 2860 2861 for (i = 0; i < GPIO_MAX; i++) { 2862 if (!sfp->gpio_irq[i]) 2863 continue; 2864 2865 devm_free_irq(sfp->dev, sfp->gpio_irq[i], sfp); 2866 } 2867 2868 cancel_delayed_work_sync(&sfp->poll); 2869 cancel_delayed_work_sync(&sfp->timeout); 2870 } 2871 2872 static struct platform_driver sfp_driver = { 2873 .probe = sfp_probe, 2874 .remove = sfp_remove, 2875 .shutdown = sfp_shutdown, 2876 .driver = { 2877 .name = "sfp", 2878 .of_match_table = sfp_of_match, 2879 }, 2880 }; 2881 2882 static int sfp_init(void) 2883 { 2884 poll_jiffies = msecs_to_jiffies(100); 2885 2886 return platform_driver_register(&sfp_driver); 2887 } 2888 module_init(sfp_init); 2889 2890 static void sfp_exit(void) 2891 { 2892 platform_driver_unregister(&sfp_driver); 2893 } 2894 module_exit(sfp_exit); 2895 2896 MODULE_ALIAS("platform:sfp"); 2897 MODULE_AUTHOR("Russell King"); 2898 MODULE_LICENSE("GPL v2"); 2899