1 /* 2 * drivers/net/phy/realtek.c 3 * 4 * Driver for Realtek PHYs 5 * 6 * Author: Johnson Leung <r58129@freescale.com> 7 * 8 * Copyright (c) 2004 Freescale Semiconductor, Inc. 9 * 10 * This program is free software; you can redistribute it and/or modify it 11 * under the terms of the GNU General Public License as published by the 12 * Free Software Foundation; either version 2 of the License, or (at your 13 * option) any later version. 14 * 15 */ 16 #include <linux/bitops.h> 17 #include <linux/phy.h> 18 #include <linux/module.h> 19 20 #define RTL821x_PHYSR 0x11 21 #define RTL821x_PHYSR_DUPLEX BIT(13) 22 #define RTL821x_PHYSR_SPEED GENMASK(15, 14) 23 24 #define RTL821x_INER 0x12 25 #define RTL8211B_INER_INIT 0x6400 26 #define RTL8211E_INER_LINK_STATUS BIT(10) 27 #define RTL8211F_INER_LINK_STATUS BIT(4) 28 29 #define RTL821x_INSR 0x13 30 31 #define RTL821x_PAGE_SELECT 0x1f 32 33 #define RTL8211F_INSR 0x1d 34 35 #define RTL8211F_TX_DELAY BIT(8) 36 37 #define RTL8201F_ISR 0x1e 38 #define RTL8201F_IER 0x13 39 40 MODULE_DESCRIPTION("Realtek PHY driver"); 41 MODULE_AUTHOR("Johnson Leung"); 42 MODULE_LICENSE("GPL"); 43 44 static int rtl821x_read_page(struct phy_device *phydev) 45 { 46 return __phy_read(phydev, RTL821x_PAGE_SELECT); 47 } 48 49 static int rtl821x_write_page(struct phy_device *phydev, int page) 50 { 51 return __phy_write(phydev, RTL821x_PAGE_SELECT, page); 52 } 53 54 static int rtl8201_ack_interrupt(struct phy_device *phydev) 55 { 56 int err; 57 58 err = phy_read(phydev, RTL8201F_ISR); 59 60 return (err < 0) ? err : 0; 61 } 62 63 static int rtl821x_ack_interrupt(struct phy_device *phydev) 64 { 65 int err; 66 67 err = phy_read(phydev, RTL821x_INSR); 68 69 return (err < 0) ? err : 0; 70 } 71 72 static int rtl8211f_ack_interrupt(struct phy_device *phydev) 73 { 74 int err; 75 76 err = phy_read_paged(phydev, 0xa43, RTL8211F_INSR); 77 78 return (err < 0) ? err : 0; 79 } 80 81 static int rtl8201_config_intr(struct phy_device *phydev) 82 { 83 u16 val; 84 85 if (phydev->interrupts == PHY_INTERRUPT_ENABLED) 86 val = BIT(13) | BIT(12) | BIT(11); 87 else 88 val = 0; 89 90 return phy_write_paged(phydev, 0x7, RTL8201F_IER, val); 91 } 92 93 static int rtl8211b_config_intr(struct phy_device *phydev) 94 { 95 int err; 96 97 if (phydev->interrupts == PHY_INTERRUPT_ENABLED) 98 err = phy_write(phydev, RTL821x_INER, 99 RTL8211B_INER_INIT); 100 else 101 err = phy_write(phydev, RTL821x_INER, 0); 102 103 return err; 104 } 105 106 static int rtl8211e_config_intr(struct phy_device *phydev) 107 { 108 int err; 109 110 if (phydev->interrupts == PHY_INTERRUPT_ENABLED) 111 err = phy_write(phydev, RTL821x_INER, 112 RTL8211E_INER_LINK_STATUS); 113 else 114 err = phy_write(phydev, RTL821x_INER, 0); 115 116 return err; 117 } 118 119 static int rtl8211f_config_intr(struct phy_device *phydev) 120 { 121 u16 val; 122 123 if (phydev->interrupts == PHY_INTERRUPT_ENABLED) 124 val = RTL8211F_INER_LINK_STATUS; 125 else 126 val = 0; 127 128 return phy_write_paged(phydev, 0xa42, RTL821x_INER, val); 129 } 130 131 static int rtl8211f_config_init(struct phy_device *phydev) 132 { 133 int ret; 134 u16 val = 0; 135 136 ret = genphy_config_init(phydev); 137 if (ret < 0) 138 return ret; 139 140 /* enable TX-delay for rgmii-id and rgmii-txid, otherwise disable it */ 141 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || 142 phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) 143 val = RTL8211F_TX_DELAY; 144 145 return phy_modify_paged(phydev, 0xd08, 0x11, RTL8211F_TX_DELAY, val); 146 } 147 148 static struct phy_driver realtek_drvs[] = { 149 { 150 .phy_id = 0x00008201, 151 .name = "RTL8201CP Ethernet", 152 .phy_id_mask = 0x0000ffff, 153 .features = PHY_BASIC_FEATURES, 154 .flags = PHY_HAS_INTERRUPT, 155 }, { 156 .phy_id = 0x001cc816, 157 .name = "RTL8201F 10/100Mbps Ethernet", 158 .phy_id_mask = 0x001fffff, 159 .features = PHY_BASIC_FEATURES, 160 .flags = PHY_HAS_INTERRUPT, 161 .ack_interrupt = &rtl8201_ack_interrupt, 162 .config_intr = &rtl8201_config_intr, 163 .suspend = genphy_suspend, 164 .resume = genphy_resume, 165 .read_page = rtl821x_read_page, 166 .write_page = rtl821x_write_page, 167 }, { 168 .phy_id = 0x001cc912, 169 .name = "RTL8211B Gigabit Ethernet", 170 .phy_id_mask = 0x001fffff, 171 .features = PHY_GBIT_FEATURES, 172 .flags = PHY_HAS_INTERRUPT, 173 .ack_interrupt = &rtl821x_ack_interrupt, 174 .config_intr = &rtl8211b_config_intr, 175 }, { 176 .phy_id = 0x001cc914, 177 .name = "RTL8211DN Gigabit Ethernet", 178 .phy_id_mask = 0x001fffff, 179 .features = PHY_GBIT_FEATURES, 180 .flags = PHY_HAS_INTERRUPT, 181 .ack_interrupt = rtl821x_ack_interrupt, 182 .config_intr = rtl8211e_config_intr, 183 .suspend = genphy_suspend, 184 .resume = genphy_resume, 185 }, { 186 .phy_id = 0x001cc915, 187 .name = "RTL8211E Gigabit Ethernet", 188 .phy_id_mask = 0x001fffff, 189 .features = PHY_GBIT_FEATURES, 190 .flags = PHY_HAS_INTERRUPT, 191 .ack_interrupt = &rtl821x_ack_interrupt, 192 .config_intr = &rtl8211e_config_intr, 193 .suspend = genphy_suspend, 194 .resume = genphy_resume, 195 }, { 196 .phy_id = 0x001cc916, 197 .name = "RTL8211F Gigabit Ethernet", 198 .phy_id_mask = 0x001fffff, 199 .features = PHY_GBIT_FEATURES, 200 .flags = PHY_HAS_INTERRUPT, 201 .config_init = &rtl8211f_config_init, 202 .ack_interrupt = &rtl8211f_ack_interrupt, 203 .config_intr = &rtl8211f_config_intr, 204 .suspend = genphy_suspend, 205 .resume = genphy_resume, 206 .read_page = rtl821x_read_page, 207 .write_page = rtl821x_write_page, 208 }, 209 }; 210 211 module_phy_driver(realtek_drvs); 212 213 static struct mdio_device_id __maybe_unused realtek_tbl[] = { 214 { 0x001cc816, 0x001fffff }, 215 { 0x001cc912, 0x001fffff }, 216 { 0x001cc914, 0x001fffff }, 217 { 0x001cc915, 0x001fffff }, 218 { 0x001cc916, 0x001fffff }, 219 { } 220 }; 221 222 MODULE_DEVICE_TABLE(mdio, realtek_tbl); 223