xref: /openbmc/linux/drivers/net/phy/mdio_bus.c (revision e0652f8b)
1 // SPDX-License-Identifier: GPL-2.0+
2 /* MDIO Bus interface
3  *
4  * Author: Andy Fleming
5  *
6  * Copyright (c) 2004 Freescale Semiconductor, Inc.
7  */
8 
9 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
10 
11 #include <linux/delay.h>
12 #include <linux/device.h>
13 #include <linux/errno.h>
14 #include <linux/etherdevice.h>
15 #include <linux/ethtool.h>
16 #include <linux/gpio.h>
17 #include <linux/gpio/consumer.h>
18 #include <linux/init.h>
19 #include <linux/interrupt.h>
20 #include <linux/io.h>
21 #include <linux/kernel.h>
22 #include <linux/mii.h>
23 #include <linux/mm.h>
24 #include <linux/module.h>
25 #include <linux/netdevice.h>
26 #include <linux/of_device.h>
27 #include <linux/of_gpio.h>
28 #include <linux/of_mdio.h>
29 #include <linux/phy.h>
30 #include <linux/reset.h>
31 #include <linux/skbuff.h>
32 #include <linux/slab.h>
33 #include <linux/spinlock.h>
34 #include <linux/string.h>
35 #include <linux/uaccess.h>
36 #include <linux/unistd.h>
37 
38 #define CREATE_TRACE_POINTS
39 #include <trace/events/mdio.h>
40 
41 #include "mdio-boardinfo.h"
42 
43 static int mdiobus_register_gpiod(struct mdio_device *mdiodev)
44 {
45 	/* Deassert the optional reset signal */
46 	mdiodev->reset_gpio = gpiod_get_optional(&mdiodev->dev,
47 						 "reset", GPIOD_OUT_LOW);
48 	if (IS_ERR(mdiodev->reset_gpio))
49 		return PTR_ERR(mdiodev->reset_gpio);
50 
51 	if (mdiodev->reset_gpio)
52 		gpiod_set_consumer_name(mdiodev->reset_gpio, "PHY reset");
53 
54 	return 0;
55 }
56 
57 static int mdiobus_register_reset(struct mdio_device *mdiodev)
58 {
59 	struct reset_control *reset;
60 
61 	reset = reset_control_get_optional_exclusive(&mdiodev->dev, "phy");
62 	if (IS_ERR(reset))
63 		return PTR_ERR(reset);
64 
65 	mdiodev->reset_ctrl = reset;
66 
67 	return 0;
68 }
69 
70 int mdiobus_register_device(struct mdio_device *mdiodev)
71 {
72 	int err;
73 
74 	if (mdiodev->bus->mdio_map[mdiodev->addr])
75 		return -EBUSY;
76 
77 	if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY) {
78 		err = mdiobus_register_gpiod(mdiodev);
79 		if (err)
80 			return err;
81 
82 		err = mdiobus_register_reset(mdiodev);
83 		if (err)
84 			return err;
85 
86 		/* Assert the reset signal */
87 		mdio_device_reset(mdiodev, 1);
88 	}
89 
90 	mdiodev->bus->mdio_map[mdiodev->addr] = mdiodev;
91 
92 	return 0;
93 }
94 EXPORT_SYMBOL(mdiobus_register_device);
95 
96 int mdiobus_unregister_device(struct mdio_device *mdiodev)
97 {
98 	if (mdiodev->bus->mdio_map[mdiodev->addr] != mdiodev)
99 		return -EINVAL;
100 
101 	reset_control_put(mdiodev->reset_ctrl);
102 
103 	mdiodev->bus->mdio_map[mdiodev->addr] = NULL;
104 
105 	return 0;
106 }
107 EXPORT_SYMBOL(mdiobus_unregister_device);
108 
109 struct phy_device *mdiobus_get_phy(struct mii_bus *bus, int addr)
110 {
111 	struct mdio_device *mdiodev = bus->mdio_map[addr];
112 
113 	if (!mdiodev)
114 		return NULL;
115 
116 	if (!(mdiodev->flags & MDIO_DEVICE_FLAG_PHY))
117 		return NULL;
118 
119 	return container_of(mdiodev, struct phy_device, mdio);
120 }
121 EXPORT_SYMBOL(mdiobus_get_phy);
122 
123 bool mdiobus_is_registered_device(struct mii_bus *bus, int addr)
124 {
125 	return bus->mdio_map[addr];
126 }
127 EXPORT_SYMBOL(mdiobus_is_registered_device);
128 
129 /**
130  * mdiobus_alloc_size - allocate a mii_bus structure
131  * @size: extra amount of memory to allocate for private storage.
132  * If non-zero, then bus->priv is points to that memory.
133  *
134  * Description: called by a bus driver to allocate an mii_bus
135  * structure to fill in.
136  */
137 struct mii_bus *mdiobus_alloc_size(size_t size)
138 {
139 	struct mii_bus *bus;
140 	size_t aligned_size = ALIGN(sizeof(*bus), NETDEV_ALIGN);
141 	size_t alloc_size;
142 	int i;
143 
144 	/* If we alloc extra space, it should be aligned */
145 	if (size)
146 		alloc_size = aligned_size + size;
147 	else
148 		alloc_size = sizeof(*bus);
149 
150 	bus = kzalloc(alloc_size, GFP_KERNEL);
151 	if (!bus)
152 		return NULL;
153 
154 	bus->state = MDIOBUS_ALLOCATED;
155 	if (size)
156 		bus->priv = (void *)bus + aligned_size;
157 
158 	/* Initialise the interrupts to polling and 64-bit seqcounts */
159 	for (i = 0; i < PHY_MAX_ADDR; i++) {
160 		bus->irq[i] = PHY_POLL;
161 		u64_stats_init(&bus->stats[i].syncp);
162 	}
163 
164 	return bus;
165 }
166 EXPORT_SYMBOL(mdiobus_alloc_size);
167 
168 /**
169  * mdiobus_release - mii_bus device release callback
170  * @d: the target struct device that contains the mii_bus
171  *
172  * Description: called when the last reference to an mii_bus is
173  * dropped, to free the underlying memory.
174  */
175 static void mdiobus_release(struct device *d)
176 {
177 	struct mii_bus *bus = to_mii_bus(d);
178 	BUG_ON(bus->state != MDIOBUS_RELEASED &&
179 	       /* for compatibility with error handling in drivers */
180 	       bus->state != MDIOBUS_ALLOCATED);
181 	kfree(bus);
182 }
183 
184 struct mdio_bus_stat_attr {
185 	int addr;
186 	unsigned int field_offset;
187 };
188 
189 static u64 mdio_bus_get_stat(struct mdio_bus_stats *s, unsigned int offset)
190 {
191 	const char *p = (const char *)s + offset;
192 	unsigned int start;
193 	u64 val = 0;
194 
195 	do {
196 		start = u64_stats_fetch_begin(&s->syncp);
197 		val = u64_stats_read((const u64_stats_t *)p);
198 	} while (u64_stats_fetch_retry(&s->syncp, start));
199 
200 	return val;
201 }
202 
203 static u64 mdio_bus_get_global_stat(struct mii_bus *bus, unsigned int offset)
204 {
205 	unsigned int i;
206 	u64 val = 0;
207 
208 	for (i = 0; i < PHY_MAX_ADDR; i++)
209 		val += mdio_bus_get_stat(&bus->stats[i], offset);
210 
211 	return val;
212 }
213 
214 static ssize_t mdio_bus_stat_field_show(struct device *dev,
215 					struct device_attribute *attr,
216 					char *buf)
217 {
218 	struct mii_bus *bus = to_mii_bus(dev);
219 	struct mdio_bus_stat_attr *sattr;
220 	struct dev_ext_attribute *eattr;
221 	u64 val;
222 
223 	eattr = container_of(attr, struct dev_ext_attribute, attr);
224 	sattr = eattr->var;
225 
226 	if (sattr->addr < 0)
227 		val = mdio_bus_get_global_stat(bus, sattr->field_offset);
228 	else
229 		val = mdio_bus_get_stat(&bus->stats[sattr->addr],
230 					sattr->field_offset);
231 
232 	return sprintf(buf, "%llu\n", val);
233 }
234 
235 static ssize_t mdio_bus_device_stat_field_show(struct device *dev,
236 					       struct device_attribute *attr,
237 					       char *buf)
238 {
239 	struct mdio_device *mdiodev = to_mdio_device(dev);
240 	struct mii_bus *bus = mdiodev->bus;
241 	struct mdio_bus_stat_attr *sattr;
242 	struct dev_ext_attribute *eattr;
243 	int addr = mdiodev->addr;
244 	u64 val;
245 
246 	eattr = container_of(attr, struct dev_ext_attribute, attr);
247 	sattr = eattr->var;
248 
249 	val = mdio_bus_get_stat(&bus->stats[addr], sattr->field_offset);
250 
251 	return sprintf(buf, "%llu\n", val);
252 }
253 
254 #define MDIO_BUS_STATS_ATTR_DECL(field, file)				\
255 static struct dev_ext_attribute dev_attr_mdio_bus_##field = {		\
256 	.attr = { .attr = { .name = file, .mode = 0444 },		\
257 		     .show = mdio_bus_stat_field_show,			\
258 	},								\
259 	.var = &((struct mdio_bus_stat_attr) {				\
260 		-1, offsetof(struct mdio_bus_stats, field)		\
261 	}),								\
262 };									\
263 static struct dev_ext_attribute dev_attr_mdio_bus_device_##field = {	\
264 	.attr = { .attr = { .name = file, .mode = 0444 },		\
265 		     .show = mdio_bus_device_stat_field_show,		\
266 	},								\
267 	.var = &((struct mdio_bus_stat_attr) {				\
268 		-1, offsetof(struct mdio_bus_stats, field)		\
269 	}),								\
270 };
271 
272 #define MDIO_BUS_STATS_ATTR(field)					\
273 	MDIO_BUS_STATS_ATTR_DECL(field, __stringify(field))
274 
275 MDIO_BUS_STATS_ATTR(transfers);
276 MDIO_BUS_STATS_ATTR(errors);
277 MDIO_BUS_STATS_ATTR(writes);
278 MDIO_BUS_STATS_ATTR(reads);
279 
280 #define MDIO_BUS_STATS_ADDR_ATTR_DECL(field, addr, file)		\
281 static struct dev_ext_attribute dev_attr_mdio_bus_addr_##field##_##addr = { \
282 	.attr = { .attr = { .name = file, .mode = 0444 },		\
283 		     .show = mdio_bus_stat_field_show,			\
284 	},								\
285 	.var = &((struct mdio_bus_stat_attr) {				\
286 		addr, offsetof(struct mdio_bus_stats, field)		\
287 	}),								\
288 }
289 
290 #define MDIO_BUS_STATS_ADDR_ATTR(field, addr)				\
291 	MDIO_BUS_STATS_ADDR_ATTR_DECL(field, addr,			\
292 				 __stringify(field) "_" __stringify(addr))
293 
294 #define MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(addr)			\
295 	MDIO_BUS_STATS_ADDR_ATTR(transfers, addr);			\
296 	MDIO_BUS_STATS_ADDR_ATTR(errors, addr);				\
297 	MDIO_BUS_STATS_ADDR_ATTR(writes, addr);				\
298 	MDIO_BUS_STATS_ADDR_ATTR(reads, addr)				\
299 
300 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(0);
301 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(1);
302 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(2);
303 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(3);
304 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(4);
305 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(5);
306 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(6);
307 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(7);
308 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(8);
309 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(9);
310 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(10);
311 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(11);
312 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(12);
313 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(13);
314 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(14);
315 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(15);
316 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(16);
317 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(17);
318 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(18);
319 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(19);
320 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(20);
321 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(21);
322 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(22);
323 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(23);
324 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(24);
325 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(25);
326 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(26);
327 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(27);
328 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(28);
329 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(29);
330 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(30);
331 MDIO_BUS_STATS_ADDR_ATTR_GROUP_DECL(31);
332 
333 #define MDIO_BUS_STATS_ADDR_ATTR_GROUP(addr)				\
334 	&dev_attr_mdio_bus_addr_transfers_##addr.attr.attr,		\
335 	&dev_attr_mdio_bus_addr_errors_##addr.attr.attr,		\
336 	&dev_attr_mdio_bus_addr_writes_##addr.attr.attr,		\
337 	&dev_attr_mdio_bus_addr_reads_##addr.attr.attr			\
338 
339 static struct attribute *mdio_bus_statistics_attrs[] = {
340 	&dev_attr_mdio_bus_transfers.attr.attr,
341 	&dev_attr_mdio_bus_errors.attr.attr,
342 	&dev_attr_mdio_bus_writes.attr.attr,
343 	&dev_attr_mdio_bus_reads.attr.attr,
344 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(0),
345 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(1),
346 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(2),
347 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(3),
348 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(4),
349 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(5),
350 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(6),
351 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(7),
352 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(8),
353 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(9),
354 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(10),
355 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(11),
356 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(12),
357 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(13),
358 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(14),
359 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(15),
360 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(16),
361 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(17),
362 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(18),
363 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(19),
364 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(20),
365 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(21),
366 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(22),
367 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(23),
368 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(24),
369 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(25),
370 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(26),
371 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(27),
372 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(28),
373 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(29),
374 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(30),
375 	MDIO_BUS_STATS_ADDR_ATTR_GROUP(31),
376 	NULL,
377 };
378 
379 static const struct attribute_group mdio_bus_statistics_group = {
380 	.name	= "statistics",
381 	.attrs	= mdio_bus_statistics_attrs,
382 };
383 
384 static const struct attribute_group *mdio_bus_groups[] = {
385 	&mdio_bus_statistics_group,
386 	NULL,
387 };
388 
389 static struct class mdio_bus_class = {
390 	.name		= "mdio_bus",
391 	.dev_release	= mdiobus_release,
392 	.dev_groups	= mdio_bus_groups,
393 };
394 
395 /**
396  * mdio_find_bus - Given the name of a mdiobus, find the mii_bus.
397  * @mdio_name: The name of a mdiobus.
398  *
399  * Returns a reference to the mii_bus, or NULL if none found.  The
400  * embedded struct device will have its reference count incremented,
401  * and this must be put_deviced'ed once the bus is finished with.
402  */
403 struct mii_bus *mdio_find_bus(const char *mdio_name)
404 {
405 	struct device *d;
406 
407 	d = class_find_device_by_name(&mdio_bus_class, mdio_name);
408 	return d ? to_mii_bus(d) : NULL;
409 }
410 EXPORT_SYMBOL(mdio_find_bus);
411 
412 #if IS_ENABLED(CONFIG_OF_MDIO)
413 /**
414  * of_mdio_find_bus - Given an mii_bus node, find the mii_bus.
415  * @mdio_bus_np: Pointer to the mii_bus.
416  *
417  * Returns a reference to the mii_bus, or NULL if none found.  The
418  * embedded struct device will have its reference count incremented,
419  * and this must be put once the bus is finished with.
420  *
421  * Because the association of a device_node and mii_bus is made via
422  * of_mdiobus_register(), the mii_bus cannot be found before it is
423  * registered with of_mdiobus_register().
424  *
425  */
426 struct mii_bus *of_mdio_find_bus(struct device_node *mdio_bus_np)
427 {
428 	struct device *d;
429 
430 	if (!mdio_bus_np)
431 		return NULL;
432 
433 	d = class_find_device_by_of_node(&mdio_bus_class, mdio_bus_np);
434 	return d ? to_mii_bus(d) : NULL;
435 }
436 EXPORT_SYMBOL(of_mdio_find_bus);
437 
438 /* Walk the list of subnodes of a mdio bus and look for a node that
439  * matches the mdio device's address with its 'reg' property. If
440  * found, set the of_node pointer for the mdio device. This allows
441  * auto-probed phy devices to be supplied with information passed in
442  * via DT.
443  */
444 static void of_mdiobus_link_mdiodev(struct mii_bus *bus,
445 				    struct mdio_device *mdiodev)
446 {
447 	struct device *dev = &mdiodev->dev;
448 	struct device_node *child;
449 
450 	if (dev->of_node || !bus->dev.of_node)
451 		return;
452 
453 	for_each_available_child_of_node(bus->dev.of_node, child) {
454 		int addr;
455 
456 		addr = of_mdio_parse_addr(dev, child);
457 		if (addr < 0)
458 			continue;
459 
460 		if (addr == mdiodev->addr) {
461 			dev->of_node = child;
462 			dev->fwnode = of_fwnode_handle(child);
463 			return;
464 		}
465 	}
466 }
467 #else /* !IS_ENABLED(CONFIG_OF_MDIO) */
468 static inline void of_mdiobus_link_mdiodev(struct mii_bus *mdio,
469 					   struct mdio_device *mdiodev)
470 {
471 }
472 #endif
473 
474 /**
475  * mdiobus_create_device - create a full MDIO device given
476  * a mdio_board_info structure
477  * @bus: MDIO bus to create the devices on
478  * @bi: mdio_board_info structure describing the devices
479  *
480  * Returns 0 on success or < 0 on error.
481  */
482 static int mdiobus_create_device(struct mii_bus *bus,
483 				 struct mdio_board_info *bi)
484 {
485 	struct mdio_device *mdiodev;
486 	int ret = 0;
487 
488 	mdiodev = mdio_device_create(bus, bi->mdio_addr);
489 	if (IS_ERR(mdiodev))
490 		return -ENODEV;
491 
492 	strncpy(mdiodev->modalias, bi->modalias,
493 		sizeof(mdiodev->modalias));
494 	mdiodev->bus_match = mdio_device_bus_match;
495 	mdiodev->dev.platform_data = (void *)bi->platform_data;
496 
497 	ret = mdio_device_register(mdiodev);
498 	if (ret)
499 		mdio_device_free(mdiodev);
500 
501 	return ret;
502 }
503 
504 /**
505  * __mdiobus_register - bring up all the PHYs on a given bus and attach them to bus
506  * @bus: target mii_bus
507  * @owner: module containing bus accessor functions
508  *
509  * Description: Called by a bus driver to bring up all the PHYs
510  *   on a given bus, and attach them to the bus. Drivers should use
511  *   mdiobus_register() rather than __mdiobus_register() unless they
512  *   need to pass a specific owner module. MDIO devices which are not
513  *   PHYs will not be brought up by this function. They are expected
514  *   to be explicitly listed in DT and instantiated by of_mdiobus_register().
515  *
516  * Returns 0 on success or < 0 on error.
517  */
518 int __mdiobus_register(struct mii_bus *bus, struct module *owner)
519 {
520 	struct mdio_device *mdiodev;
521 	int i, err;
522 	struct gpio_desc *gpiod;
523 
524 	if (NULL == bus || NULL == bus->name ||
525 	    NULL == bus->read || NULL == bus->write)
526 		return -EINVAL;
527 
528 	BUG_ON(bus->state != MDIOBUS_ALLOCATED &&
529 	       bus->state != MDIOBUS_UNREGISTERED);
530 
531 	bus->owner = owner;
532 	bus->dev.parent = bus->parent;
533 	bus->dev.class = &mdio_bus_class;
534 	bus->dev.groups = NULL;
535 	dev_set_name(&bus->dev, "%s", bus->id);
536 
537 	err = device_register(&bus->dev);
538 	if (err) {
539 		pr_err("mii_bus %s failed to register\n", bus->id);
540 		return -EINVAL;
541 	}
542 
543 	mutex_init(&bus->mdio_lock);
544 	mutex_init(&bus->shared_lock);
545 
546 	/* assert bus level PHY GPIO reset */
547 	gpiod = devm_gpiod_get_optional(&bus->dev, "reset", GPIOD_OUT_HIGH);
548 	if (IS_ERR(gpiod)) {
549 		err = dev_err_probe(&bus->dev, PTR_ERR(gpiod),
550 				    "mii_bus %s couldn't get reset GPIO\n",
551 				    bus->id);
552 		device_del(&bus->dev);
553 		return err;
554 	} else	if (gpiod) {
555 		bus->reset_gpiod = gpiod;
556 		fsleep(bus->reset_delay_us);
557 		gpiod_set_value_cansleep(gpiod, 0);
558 		if (bus->reset_post_delay_us > 0)
559 			fsleep(bus->reset_post_delay_us);
560 	}
561 
562 	if (bus->reset) {
563 		err = bus->reset(bus);
564 		if (err)
565 			goto error_reset_gpiod;
566 	}
567 
568 	for (i = 0; i < PHY_MAX_ADDR; i++) {
569 		if ((bus->phy_mask & (1 << i)) == 0) {
570 			struct phy_device *phydev;
571 
572 			phydev = mdiobus_scan(bus, i);
573 			if (IS_ERR(phydev) && (PTR_ERR(phydev) != -ENODEV)) {
574 				err = PTR_ERR(phydev);
575 				goto error;
576 			}
577 		}
578 	}
579 
580 	mdiobus_setup_mdiodev_from_board_info(bus, mdiobus_create_device);
581 
582 	bus->state = MDIOBUS_REGISTERED;
583 	pr_info("%s: probed\n", bus->name);
584 	return 0;
585 
586 error:
587 	while (--i >= 0) {
588 		mdiodev = bus->mdio_map[i];
589 		if (!mdiodev)
590 			continue;
591 
592 		mdiodev->device_remove(mdiodev);
593 		mdiodev->device_free(mdiodev);
594 	}
595 error_reset_gpiod:
596 	/* Put PHYs in RESET to save power */
597 	if (bus->reset_gpiod)
598 		gpiod_set_value_cansleep(bus->reset_gpiod, 1);
599 
600 	device_del(&bus->dev);
601 	return err;
602 }
603 EXPORT_SYMBOL(__mdiobus_register);
604 
605 void mdiobus_unregister(struct mii_bus *bus)
606 {
607 	struct mdio_device *mdiodev;
608 	int i;
609 
610 	BUG_ON(bus->state != MDIOBUS_REGISTERED);
611 	bus->state = MDIOBUS_UNREGISTERED;
612 
613 	for (i = 0; i < PHY_MAX_ADDR; i++) {
614 		mdiodev = bus->mdio_map[i];
615 		if (!mdiodev)
616 			continue;
617 
618 		if (mdiodev->reset_gpio)
619 			gpiod_put(mdiodev->reset_gpio);
620 
621 		mdiodev->device_remove(mdiodev);
622 		mdiodev->device_free(mdiodev);
623 	}
624 
625 	/* Put PHYs in RESET to save power */
626 	if (bus->reset_gpiod)
627 		gpiod_set_value_cansleep(bus->reset_gpiod, 1);
628 
629 	device_del(&bus->dev);
630 }
631 EXPORT_SYMBOL(mdiobus_unregister);
632 
633 /**
634  * mdiobus_free - free a struct mii_bus
635  * @bus: mii_bus to free
636  *
637  * This function releases the reference to the underlying device
638  * object in the mii_bus.  If this is the last reference, the mii_bus
639  * will be freed.
640  */
641 void mdiobus_free(struct mii_bus *bus)
642 {
643 	/* For compatibility with error handling in drivers. */
644 	if (bus->state == MDIOBUS_ALLOCATED) {
645 		kfree(bus);
646 		return;
647 	}
648 
649 	BUG_ON(bus->state != MDIOBUS_UNREGISTERED);
650 	bus->state = MDIOBUS_RELEASED;
651 
652 	put_device(&bus->dev);
653 }
654 EXPORT_SYMBOL(mdiobus_free);
655 
656 /**
657  * mdiobus_scan - scan a bus for MDIO devices.
658  * @bus: mii_bus to scan
659  * @addr: address on bus to scan
660  *
661  * This function scans the MDIO bus, looking for devices which can be
662  * identified using a vendor/product ID in registers 2 and 3. Not all
663  * MDIO devices have such registers, but PHY devices typically
664  * do. Hence this function assumes anything found is a PHY, or can be
665  * treated as a PHY. Other MDIO devices, such as switches, will
666  * probably not be found during the scan.
667  */
668 struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr)
669 {
670 	struct phy_device *phydev = ERR_PTR(-ENODEV);
671 	int err;
672 
673 	switch (bus->probe_capabilities) {
674 	case MDIOBUS_NO_CAP:
675 	case MDIOBUS_C22:
676 		phydev = get_phy_device(bus, addr, false);
677 		break;
678 	case MDIOBUS_C45:
679 		phydev = get_phy_device(bus, addr, true);
680 		break;
681 	case MDIOBUS_C22_C45:
682 		phydev = get_phy_device(bus, addr, false);
683 		if (IS_ERR(phydev))
684 			phydev = get_phy_device(bus, addr, true);
685 		break;
686 	}
687 
688 	if (IS_ERR(phydev))
689 		return phydev;
690 
691 	/*
692 	 * For DT, see if the auto-probed phy has a correspoding child
693 	 * in the bus node, and set the of_node pointer in this case.
694 	 */
695 	of_mdiobus_link_mdiodev(bus, &phydev->mdio);
696 
697 	err = phy_device_register(phydev);
698 	if (err) {
699 		phy_device_free(phydev);
700 		return ERR_PTR(-ENODEV);
701 	}
702 
703 	return phydev;
704 }
705 EXPORT_SYMBOL(mdiobus_scan);
706 
707 static void mdiobus_stats_acct(struct mdio_bus_stats *stats, bool op, int ret)
708 {
709 	preempt_disable();
710 	u64_stats_update_begin(&stats->syncp);
711 
712 	u64_stats_inc(&stats->transfers);
713 	if (ret < 0) {
714 		u64_stats_inc(&stats->errors);
715 		goto out;
716 	}
717 
718 	if (op)
719 		u64_stats_inc(&stats->reads);
720 	else
721 		u64_stats_inc(&stats->writes);
722 out:
723 	u64_stats_update_end(&stats->syncp);
724 	preempt_enable();
725 }
726 
727 /**
728  * __mdiobus_read - Unlocked version of the mdiobus_read function
729  * @bus: the mii_bus struct
730  * @addr: the phy address
731  * @regnum: register number to read
732  *
733  * Read a MDIO bus register. Caller must hold the mdio bus lock.
734  *
735  * NOTE: MUST NOT be called from interrupt context.
736  */
737 int __mdiobus_read(struct mii_bus *bus, int addr, u32 regnum)
738 {
739 	int retval;
740 
741 	lockdep_assert_held_once(&bus->mdio_lock);
742 
743 	retval = bus->read(bus, addr, regnum);
744 
745 	trace_mdio_access(bus, 1, addr, regnum, retval, retval);
746 	mdiobus_stats_acct(&bus->stats[addr], true, retval);
747 
748 	return retval;
749 }
750 EXPORT_SYMBOL(__mdiobus_read);
751 
752 /**
753  * __mdiobus_write - Unlocked version of the mdiobus_write function
754  * @bus: the mii_bus struct
755  * @addr: the phy address
756  * @regnum: register number to write
757  * @val: value to write to @regnum
758  *
759  * Write a MDIO bus register. Caller must hold the mdio bus lock.
760  *
761  * NOTE: MUST NOT be called from interrupt context.
762  */
763 int __mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val)
764 {
765 	int err;
766 
767 	lockdep_assert_held_once(&bus->mdio_lock);
768 
769 	err = bus->write(bus, addr, regnum, val);
770 
771 	trace_mdio_access(bus, 0, addr, regnum, val, err);
772 	mdiobus_stats_acct(&bus->stats[addr], false, err);
773 
774 	return err;
775 }
776 EXPORT_SYMBOL(__mdiobus_write);
777 
778 /**
779  * __mdiobus_modify_changed - Unlocked version of the mdiobus_modify function
780  * @bus: the mii_bus struct
781  * @addr: the phy address
782  * @regnum: register number to modify
783  * @mask: bit mask of bits to clear
784  * @set: bit mask of bits to set
785  *
786  * Read, modify, and if any change, write the register value back to the
787  * device. Any error returns a negative number.
788  *
789  * NOTE: MUST NOT be called from interrupt context.
790  */
791 int __mdiobus_modify_changed(struct mii_bus *bus, int addr, u32 regnum,
792 			     u16 mask, u16 set)
793 {
794 	int new, ret;
795 
796 	ret = __mdiobus_read(bus, addr, regnum);
797 	if (ret < 0)
798 		return ret;
799 
800 	new = (ret & ~mask) | set;
801 	if (new == ret)
802 		return 0;
803 
804 	ret = __mdiobus_write(bus, addr, regnum, new);
805 
806 	return ret < 0 ? ret : 1;
807 }
808 EXPORT_SYMBOL_GPL(__mdiobus_modify_changed);
809 
810 /**
811  * mdiobus_read_nested - Nested version of the mdiobus_read function
812  * @bus: the mii_bus struct
813  * @addr: the phy address
814  * @regnum: register number to read
815  *
816  * In case of nested MDIO bus access avoid lockdep false positives by
817  * using mutex_lock_nested().
818  *
819  * NOTE: MUST NOT be called from interrupt context,
820  * because the bus read/write functions may wait for an interrupt
821  * to conclude the operation.
822  */
823 int mdiobus_read_nested(struct mii_bus *bus, int addr, u32 regnum)
824 {
825 	int retval;
826 
827 	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
828 	retval = __mdiobus_read(bus, addr, regnum);
829 	mutex_unlock(&bus->mdio_lock);
830 
831 	return retval;
832 }
833 EXPORT_SYMBOL(mdiobus_read_nested);
834 
835 /**
836  * mdiobus_read - Convenience function for reading a given MII mgmt register
837  * @bus: the mii_bus struct
838  * @addr: the phy address
839  * @regnum: register number to read
840  *
841  * NOTE: MUST NOT be called from interrupt context,
842  * because the bus read/write functions may wait for an interrupt
843  * to conclude the operation.
844  */
845 int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum)
846 {
847 	int retval;
848 
849 	mutex_lock(&bus->mdio_lock);
850 	retval = __mdiobus_read(bus, addr, regnum);
851 	mutex_unlock(&bus->mdio_lock);
852 
853 	return retval;
854 }
855 EXPORT_SYMBOL(mdiobus_read);
856 
857 /**
858  * mdiobus_write_nested - Nested version of the mdiobus_write function
859  * @bus: the mii_bus struct
860  * @addr: the phy address
861  * @regnum: register number to write
862  * @val: value to write to @regnum
863  *
864  * In case of nested MDIO bus access avoid lockdep false positives by
865  * using mutex_lock_nested().
866  *
867  * NOTE: MUST NOT be called from interrupt context,
868  * because the bus read/write functions may wait for an interrupt
869  * to conclude the operation.
870  */
871 int mdiobus_write_nested(struct mii_bus *bus, int addr, u32 regnum, u16 val)
872 {
873 	int err;
874 
875 	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
876 	err = __mdiobus_write(bus, addr, regnum, val);
877 	mutex_unlock(&bus->mdio_lock);
878 
879 	return err;
880 }
881 EXPORT_SYMBOL(mdiobus_write_nested);
882 
883 /**
884  * mdiobus_write - Convenience function for writing a given MII mgmt register
885  * @bus: the mii_bus struct
886  * @addr: the phy address
887  * @regnum: register number to write
888  * @val: value to write to @regnum
889  *
890  * NOTE: MUST NOT be called from interrupt context,
891  * because the bus read/write functions may wait for an interrupt
892  * to conclude the operation.
893  */
894 int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val)
895 {
896 	int err;
897 
898 	mutex_lock(&bus->mdio_lock);
899 	err = __mdiobus_write(bus, addr, regnum, val);
900 	mutex_unlock(&bus->mdio_lock);
901 
902 	return err;
903 }
904 EXPORT_SYMBOL(mdiobus_write);
905 
906 /**
907  * mdiobus_modify - Convenience function for modifying a given mdio device
908  *	register
909  * @bus: the mii_bus struct
910  * @addr: the phy address
911  * @regnum: register number to write
912  * @mask: bit mask of bits to clear
913  * @set: bit mask of bits to set
914  */
915 int mdiobus_modify(struct mii_bus *bus, int addr, u32 regnum, u16 mask, u16 set)
916 {
917 	int err;
918 
919 	mutex_lock(&bus->mdio_lock);
920 	err = __mdiobus_modify_changed(bus, addr, regnum, mask, set);
921 	mutex_unlock(&bus->mdio_lock);
922 
923 	return err < 0 ? err : 0;
924 }
925 EXPORT_SYMBOL_GPL(mdiobus_modify);
926 
927 /**
928  * mdio_bus_match - determine if given MDIO driver supports the given
929  *		    MDIO device
930  * @dev: target MDIO device
931  * @drv: given MDIO driver
932  *
933  * Description: Given a MDIO device, and a MDIO driver, return 1 if
934  *   the driver supports the device.  Otherwise, return 0. This may
935  *   require calling the devices own match function, since different classes
936  *   of MDIO devices have different match criteria.
937  */
938 static int mdio_bus_match(struct device *dev, struct device_driver *drv)
939 {
940 	struct mdio_device *mdio = to_mdio_device(dev);
941 
942 	if (of_driver_match_device(dev, drv))
943 		return 1;
944 
945 	if (mdio->bus_match)
946 		return mdio->bus_match(dev, drv);
947 
948 	return 0;
949 }
950 
951 static int mdio_uevent(struct device *dev, struct kobj_uevent_env *env)
952 {
953 	int rc;
954 
955 	/* Some devices have extra OF data and an OF-style MODALIAS */
956 	rc = of_device_uevent_modalias(dev, env);
957 	if (rc != -ENODEV)
958 		return rc;
959 
960 	return 0;
961 }
962 
963 static struct attribute *mdio_bus_device_statistics_attrs[] = {
964 	&dev_attr_mdio_bus_device_transfers.attr.attr,
965 	&dev_attr_mdio_bus_device_errors.attr.attr,
966 	&dev_attr_mdio_bus_device_writes.attr.attr,
967 	&dev_attr_mdio_bus_device_reads.attr.attr,
968 	NULL,
969 };
970 
971 static const struct attribute_group mdio_bus_device_statistics_group = {
972 	.name	= "statistics",
973 	.attrs	= mdio_bus_device_statistics_attrs,
974 };
975 
976 static const struct attribute_group *mdio_bus_dev_groups[] = {
977 	&mdio_bus_device_statistics_group,
978 	NULL,
979 };
980 
981 struct bus_type mdio_bus_type = {
982 	.name		= "mdio_bus",
983 	.dev_groups	= mdio_bus_dev_groups,
984 	.match		= mdio_bus_match,
985 	.uevent		= mdio_uevent,
986 };
987 EXPORT_SYMBOL(mdio_bus_type);
988 
989 int __init mdio_bus_init(void)
990 {
991 	int ret;
992 
993 	ret = class_register(&mdio_bus_class);
994 	if (!ret) {
995 		ret = bus_register(&mdio_bus_type);
996 		if (ret)
997 			class_unregister(&mdio_bus_class);
998 	}
999 
1000 	return ret;
1001 }
1002 EXPORT_SYMBOL_GPL(mdio_bus_init);
1003 
1004 #if IS_ENABLED(CONFIG_PHYLIB)
1005 void mdio_bus_exit(void)
1006 {
1007 	class_unregister(&mdio_bus_class);
1008 	bus_unregister(&mdio_bus_type);
1009 }
1010 EXPORT_SYMBOL_GPL(mdio_bus_exit);
1011 #else
1012 module_init(mdio_bus_init);
1013 /* no module_exit, intentional */
1014 MODULE_LICENSE("GPL");
1015 MODULE_DESCRIPTION("MDIO bus/device layer");
1016 #endif
1017