1 /* 2 * drivers/net/phy/marvell.c 3 * 4 * Driver for Marvell PHYs 5 * 6 * Author: Andy Fleming 7 * 8 * Copyright (c) 2004 Freescale Semiconductor, Inc. 9 * 10 * Copyright (c) 2013 Michael Stapelberg <michael@stapelberg.de> 11 * 12 * This program is free software; you can redistribute it and/or modify it 13 * under the terms of the GNU General Public License as published by the 14 * Free Software Foundation; either version 2 of the License, or (at your 15 * option) any later version. 16 * 17 */ 18 #include <linux/kernel.h> 19 #include <linux/string.h> 20 #include <linux/errno.h> 21 #include <linux/unistd.h> 22 #include <linux/interrupt.h> 23 #include <linux/init.h> 24 #include <linux/delay.h> 25 #include <linux/netdevice.h> 26 #include <linux/etherdevice.h> 27 #include <linux/skbuff.h> 28 #include <linux/spinlock.h> 29 #include <linux/mm.h> 30 #include <linux/module.h> 31 #include <linux/mii.h> 32 #include <linux/ethtool.h> 33 #include <linux/phy.h> 34 #include <linux/marvell_phy.h> 35 #include <linux/of.h> 36 37 #include <asm/io.h> 38 #include <asm/irq.h> 39 #include <asm/uaccess.h> 40 41 #define MII_MARVELL_PHY_PAGE 22 42 43 #define MII_M1011_IEVENT 0x13 44 #define MII_M1011_IEVENT_CLEAR 0x0000 45 46 #define MII_M1011_IMASK 0x12 47 #define MII_M1011_IMASK_INIT 0x6400 48 #define MII_M1011_IMASK_CLEAR 0x0000 49 50 #define MII_M1011_PHY_SCR 0x10 51 #define MII_M1011_PHY_SCR_AUTO_CROSS 0x0060 52 53 #define MII_M1145_PHY_EXT_CR 0x14 54 #define MII_M1145_RGMII_RX_DELAY 0x0080 55 #define MII_M1145_RGMII_TX_DELAY 0x0002 56 57 #define MII_M1111_PHY_LED_CONTROL 0x18 58 #define MII_M1111_PHY_LED_DIRECT 0x4100 59 #define MII_M1111_PHY_LED_COMBINE 0x411c 60 #define MII_M1111_PHY_EXT_CR 0x14 61 #define MII_M1111_RX_DELAY 0x80 62 #define MII_M1111_TX_DELAY 0x2 63 #define MII_M1111_PHY_EXT_SR 0x1b 64 65 #define MII_M1111_HWCFG_MODE_MASK 0xf 66 #define MII_M1111_HWCFG_MODE_COPPER_RGMII 0xb 67 #define MII_M1111_HWCFG_MODE_FIBER_RGMII 0x3 68 #define MII_M1111_HWCFG_MODE_SGMII_NO_CLK 0x4 69 #define MII_M1111_HWCFG_MODE_COPPER_RTBI 0x9 70 #define MII_M1111_HWCFG_FIBER_COPPER_AUTO 0x8000 71 #define MII_M1111_HWCFG_FIBER_COPPER_RES 0x2000 72 73 #define MII_M1111_COPPER 0 74 #define MII_M1111_FIBER 1 75 76 #define MII_88E1121_PHY_MSCR_PAGE 2 77 #define MII_88E1121_PHY_MSCR_REG 21 78 #define MII_88E1121_PHY_MSCR_RX_DELAY BIT(5) 79 #define MII_88E1121_PHY_MSCR_TX_DELAY BIT(4) 80 #define MII_88E1121_PHY_MSCR_DELAY_MASK (~(0x3 << 4)) 81 82 #define MII_88E1318S_PHY_MSCR1_REG 16 83 #define MII_88E1318S_PHY_MSCR1_PAD_ODD BIT(6) 84 85 /* Copper Specific Interrupt Enable Register */ 86 #define MII_88E1318S_PHY_CSIER 0x12 87 /* WOL Event Interrupt Enable */ 88 #define MII_88E1318S_PHY_CSIER_WOL_EIE BIT(7) 89 90 /* LED Timer Control Register */ 91 #define MII_88E1318S_PHY_LED_PAGE 0x03 92 #define MII_88E1318S_PHY_LED_TCR 0x12 93 #define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15) 94 #define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7) 95 #define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11) 96 97 /* Magic Packet MAC address registers */ 98 #define MII_88E1318S_PHY_MAGIC_PACKET_WORD2 0x17 99 #define MII_88E1318S_PHY_MAGIC_PACKET_WORD1 0x18 100 #define MII_88E1318S_PHY_MAGIC_PACKET_WORD0 0x19 101 102 #define MII_88E1318S_PHY_WOL_PAGE 0x11 103 #define MII_88E1318S_PHY_WOL_CTRL 0x10 104 #define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12) 105 #define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE BIT(14) 106 107 #define MII_88E1121_PHY_LED_CTRL 16 108 #define MII_88E1121_PHY_LED_PAGE 3 109 #define MII_88E1121_PHY_LED_DEF 0x0030 110 111 #define MII_M1011_PHY_STATUS 0x11 112 #define MII_M1011_PHY_STATUS_1000 0x8000 113 #define MII_M1011_PHY_STATUS_100 0x4000 114 #define MII_M1011_PHY_STATUS_SPD_MASK 0xc000 115 #define MII_M1011_PHY_STATUS_FULLDUPLEX 0x2000 116 #define MII_M1011_PHY_STATUS_RESOLVED 0x0800 117 #define MII_M1011_PHY_STATUS_LINK 0x0400 118 119 #define MII_M1116R_CONTROL_REG_MAC 21 120 121 122 MODULE_DESCRIPTION("Marvell PHY driver"); 123 MODULE_AUTHOR("Andy Fleming"); 124 MODULE_LICENSE("GPL"); 125 126 static int marvell_ack_interrupt(struct phy_device *phydev) 127 { 128 int err; 129 130 /* Clear the interrupts by reading the reg */ 131 err = phy_read(phydev, MII_M1011_IEVENT); 132 133 if (err < 0) 134 return err; 135 136 return 0; 137 } 138 139 static int marvell_config_intr(struct phy_device *phydev) 140 { 141 int err; 142 143 if (phydev->interrupts == PHY_INTERRUPT_ENABLED) 144 err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_INIT); 145 else 146 err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR); 147 148 return err; 149 } 150 151 static int marvell_config_aneg(struct phy_device *phydev) 152 { 153 int err; 154 155 /* The Marvell PHY has an errata which requires 156 * that certain registers get written in order 157 * to restart autonegotiation */ 158 err = phy_write(phydev, MII_BMCR, BMCR_RESET); 159 160 if (err < 0) 161 return err; 162 163 err = phy_write(phydev, 0x1d, 0x1f); 164 if (err < 0) 165 return err; 166 167 err = phy_write(phydev, 0x1e, 0x200c); 168 if (err < 0) 169 return err; 170 171 err = phy_write(phydev, 0x1d, 0x5); 172 if (err < 0) 173 return err; 174 175 err = phy_write(phydev, 0x1e, 0); 176 if (err < 0) 177 return err; 178 179 err = phy_write(phydev, 0x1e, 0x100); 180 if (err < 0) 181 return err; 182 183 err = phy_write(phydev, MII_M1011_PHY_SCR, 184 MII_M1011_PHY_SCR_AUTO_CROSS); 185 if (err < 0) 186 return err; 187 188 err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL, 189 MII_M1111_PHY_LED_DIRECT); 190 if (err < 0) 191 return err; 192 193 err = genphy_config_aneg(phydev); 194 if (err < 0) 195 return err; 196 197 if (phydev->autoneg != AUTONEG_ENABLE) { 198 int bmcr; 199 200 /* 201 * A write to speed/duplex bits (that is performed by 202 * genphy_config_aneg() call above) must be followed by 203 * a software reset. Otherwise, the write has no effect. 204 */ 205 bmcr = phy_read(phydev, MII_BMCR); 206 if (bmcr < 0) 207 return bmcr; 208 209 err = phy_write(phydev, MII_BMCR, bmcr | BMCR_RESET); 210 if (err < 0) 211 return err; 212 } 213 214 return 0; 215 } 216 217 #ifdef CONFIG_OF_MDIO 218 /* 219 * Set and/or override some configuration registers based on the 220 * marvell,reg-init property stored in the of_node for the phydev. 221 * 222 * marvell,reg-init = <reg-page reg mask value>,...; 223 * 224 * There may be one or more sets of <reg-page reg mask value>: 225 * 226 * reg-page: which register bank to use. 227 * reg: the register. 228 * mask: if non-zero, ANDed with existing register value. 229 * value: ORed with the masked value and written to the regiser. 230 * 231 */ 232 static int marvell_of_reg_init(struct phy_device *phydev) 233 { 234 const __be32 *paddr; 235 int len, i, saved_page, current_page, page_changed, ret; 236 237 if (!phydev->dev.of_node) 238 return 0; 239 240 paddr = of_get_property(phydev->dev.of_node, "marvell,reg-init", &len); 241 if (!paddr || len < (4 * sizeof(*paddr))) 242 return 0; 243 244 saved_page = phy_read(phydev, MII_MARVELL_PHY_PAGE); 245 if (saved_page < 0) 246 return saved_page; 247 page_changed = 0; 248 current_page = saved_page; 249 250 ret = 0; 251 len /= sizeof(*paddr); 252 for (i = 0; i < len - 3; i += 4) { 253 u16 reg_page = be32_to_cpup(paddr + i); 254 u16 reg = be32_to_cpup(paddr + i + 1); 255 u16 mask = be32_to_cpup(paddr + i + 2); 256 u16 val_bits = be32_to_cpup(paddr + i + 3); 257 int val; 258 259 if (reg_page != current_page) { 260 current_page = reg_page; 261 page_changed = 1; 262 ret = phy_write(phydev, MII_MARVELL_PHY_PAGE, reg_page); 263 if (ret < 0) 264 goto err; 265 } 266 267 val = 0; 268 if (mask) { 269 val = phy_read(phydev, reg); 270 if (val < 0) { 271 ret = val; 272 goto err; 273 } 274 val &= mask; 275 } 276 val |= val_bits; 277 278 ret = phy_write(phydev, reg, val); 279 if (ret < 0) 280 goto err; 281 282 } 283 err: 284 if (page_changed) { 285 i = phy_write(phydev, MII_MARVELL_PHY_PAGE, saved_page); 286 if (ret == 0) 287 ret = i; 288 } 289 return ret; 290 } 291 #else 292 static int marvell_of_reg_init(struct phy_device *phydev) 293 { 294 return 0; 295 } 296 #endif /* CONFIG_OF_MDIO */ 297 298 static int m88e1121_config_aneg(struct phy_device *phydev) 299 { 300 int err, oldpage, mscr; 301 302 oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); 303 304 err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 305 MII_88E1121_PHY_MSCR_PAGE); 306 if (err < 0) 307 return err; 308 309 if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || 310 (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) || 311 (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) || 312 (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) { 313 314 mscr = phy_read(phydev, MII_88E1121_PHY_MSCR_REG) & 315 MII_88E1121_PHY_MSCR_DELAY_MASK; 316 317 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) 318 mscr |= (MII_88E1121_PHY_MSCR_RX_DELAY | 319 MII_88E1121_PHY_MSCR_TX_DELAY); 320 else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) 321 mscr |= MII_88E1121_PHY_MSCR_RX_DELAY; 322 else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) 323 mscr |= MII_88E1121_PHY_MSCR_TX_DELAY; 324 325 err = phy_write(phydev, MII_88E1121_PHY_MSCR_REG, mscr); 326 if (err < 0) 327 return err; 328 } 329 330 phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); 331 332 err = phy_write(phydev, MII_BMCR, BMCR_RESET); 333 if (err < 0) 334 return err; 335 336 err = phy_write(phydev, MII_M1011_PHY_SCR, 337 MII_M1011_PHY_SCR_AUTO_CROSS); 338 if (err < 0) 339 return err; 340 341 oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); 342 343 phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE); 344 phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF); 345 phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); 346 347 err = genphy_config_aneg(phydev); 348 349 return err; 350 } 351 352 static int m88e1318_config_aneg(struct phy_device *phydev) 353 { 354 int err, oldpage, mscr; 355 356 oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); 357 358 err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 359 MII_88E1121_PHY_MSCR_PAGE); 360 if (err < 0) 361 return err; 362 363 mscr = phy_read(phydev, MII_88E1318S_PHY_MSCR1_REG); 364 mscr |= MII_88E1318S_PHY_MSCR1_PAD_ODD; 365 366 err = phy_write(phydev, MII_88E1318S_PHY_MSCR1_REG, mscr); 367 if (err < 0) 368 return err; 369 370 err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); 371 if (err < 0) 372 return err; 373 374 return m88e1121_config_aneg(phydev); 375 } 376 377 static int m88e1510_config_aneg(struct phy_device *phydev) 378 { 379 int err; 380 381 err = m88e1318_config_aneg(phydev); 382 if (err < 0) 383 return err; 384 385 return marvell_of_reg_init(phydev); 386 } 387 388 static int m88e1116r_config_init(struct phy_device *phydev) 389 { 390 int temp; 391 int err; 392 393 temp = phy_read(phydev, MII_BMCR); 394 temp |= BMCR_RESET; 395 err = phy_write(phydev, MII_BMCR, temp); 396 if (err < 0) 397 return err; 398 399 mdelay(500); 400 401 err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0); 402 if (err < 0) 403 return err; 404 405 temp = phy_read(phydev, MII_M1011_PHY_SCR); 406 temp |= (7 << 12); /* max number of gigabit attempts */ 407 temp |= (1 << 11); /* enable downshift */ 408 temp |= MII_M1011_PHY_SCR_AUTO_CROSS; 409 err = phy_write(phydev, MII_M1011_PHY_SCR, temp); 410 if (err < 0) 411 return err; 412 413 err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 2); 414 if (err < 0) 415 return err; 416 temp = phy_read(phydev, MII_M1116R_CONTROL_REG_MAC); 417 temp |= (1 << 5); 418 temp |= (1 << 4); 419 err = phy_write(phydev, MII_M1116R_CONTROL_REG_MAC, temp); 420 if (err < 0) 421 return err; 422 err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0); 423 if (err < 0) 424 return err; 425 426 temp = phy_read(phydev, MII_BMCR); 427 temp |= BMCR_RESET; 428 err = phy_write(phydev, MII_BMCR, temp); 429 if (err < 0) 430 return err; 431 432 mdelay(500); 433 434 return 0; 435 } 436 437 static int m88e1111_config_init(struct phy_device *phydev) 438 { 439 int err; 440 int temp; 441 442 if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || 443 (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) || 444 (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) || 445 (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) { 446 447 temp = phy_read(phydev, MII_M1111_PHY_EXT_CR); 448 if (temp < 0) 449 return temp; 450 451 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) { 452 temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY); 453 } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) { 454 temp &= ~MII_M1111_TX_DELAY; 455 temp |= MII_M1111_RX_DELAY; 456 } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) { 457 temp &= ~MII_M1111_RX_DELAY; 458 temp |= MII_M1111_TX_DELAY; 459 } 460 461 err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp); 462 if (err < 0) 463 return err; 464 465 temp = phy_read(phydev, MII_M1111_PHY_EXT_SR); 466 if (temp < 0) 467 return temp; 468 469 temp &= ~(MII_M1111_HWCFG_MODE_MASK); 470 471 if (temp & MII_M1111_HWCFG_FIBER_COPPER_RES) 472 temp |= MII_M1111_HWCFG_MODE_FIBER_RGMII; 473 else 474 temp |= MII_M1111_HWCFG_MODE_COPPER_RGMII; 475 476 err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp); 477 if (err < 0) 478 return err; 479 } 480 481 if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { 482 temp = phy_read(phydev, MII_M1111_PHY_EXT_SR); 483 if (temp < 0) 484 return temp; 485 486 temp &= ~(MII_M1111_HWCFG_MODE_MASK); 487 temp |= MII_M1111_HWCFG_MODE_SGMII_NO_CLK; 488 temp |= MII_M1111_HWCFG_FIBER_COPPER_AUTO; 489 490 err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp); 491 if (err < 0) 492 return err; 493 } 494 495 if (phydev->interface == PHY_INTERFACE_MODE_RTBI) { 496 temp = phy_read(phydev, MII_M1111_PHY_EXT_CR); 497 if (temp < 0) 498 return temp; 499 temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY); 500 err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp); 501 if (err < 0) 502 return err; 503 504 temp = phy_read(phydev, MII_M1111_PHY_EXT_SR); 505 if (temp < 0) 506 return temp; 507 temp &= ~(MII_M1111_HWCFG_MODE_MASK | MII_M1111_HWCFG_FIBER_COPPER_RES); 508 temp |= 0x7 | MII_M1111_HWCFG_FIBER_COPPER_AUTO; 509 err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp); 510 if (err < 0) 511 return err; 512 513 /* soft reset */ 514 err = phy_write(phydev, MII_BMCR, BMCR_RESET); 515 if (err < 0) 516 return err; 517 do 518 temp = phy_read(phydev, MII_BMCR); 519 while (temp & BMCR_RESET); 520 521 temp = phy_read(phydev, MII_M1111_PHY_EXT_SR); 522 if (temp < 0) 523 return temp; 524 temp &= ~(MII_M1111_HWCFG_MODE_MASK | MII_M1111_HWCFG_FIBER_COPPER_RES); 525 temp |= MII_M1111_HWCFG_MODE_COPPER_RTBI | MII_M1111_HWCFG_FIBER_COPPER_AUTO; 526 err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp); 527 if (err < 0) 528 return err; 529 } 530 531 err = marvell_of_reg_init(phydev); 532 if (err < 0) 533 return err; 534 535 return phy_write(phydev, MII_BMCR, BMCR_RESET); 536 } 537 538 static int m88e1118_config_aneg(struct phy_device *phydev) 539 { 540 int err; 541 542 err = phy_write(phydev, MII_BMCR, BMCR_RESET); 543 if (err < 0) 544 return err; 545 546 err = phy_write(phydev, MII_M1011_PHY_SCR, 547 MII_M1011_PHY_SCR_AUTO_CROSS); 548 if (err < 0) 549 return err; 550 551 err = genphy_config_aneg(phydev); 552 return 0; 553 } 554 555 static int m88e1118_config_init(struct phy_device *phydev) 556 { 557 int err; 558 559 /* Change address */ 560 err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002); 561 if (err < 0) 562 return err; 563 564 /* Enable 1000 Mbit */ 565 err = phy_write(phydev, 0x15, 0x1070); 566 if (err < 0) 567 return err; 568 569 /* Change address */ 570 err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0003); 571 if (err < 0) 572 return err; 573 574 /* Adjust LED Control */ 575 if (phydev->dev_flags & MARVELL_PHY_M1118_DNS323_LEDS) 576 err = phy_write(phydev, 0x10, 0x1100); 577 else 578 err = phy_write(phydev, 0x10, 0x021e); 579 if (err < 0) 580 return err; 581 582 err = marvell_of_reg_init(phydev); 583 if (err < 0) 584 return err; 585 586 /* Reset address */ 587 err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0); 588 if (err < 0) 589 return err; 590 591 return phy_write(phydev, MII_BMCR, BMCR_RESET); 592 } 593 594 static int m88e1149_config_init(struct phy_device *phydev) 595 { 596 int err; 597 598 /* Change address */ 599 err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002); 600 if (err < 0) 601 return err; 602 603 /* Enable 1000 Mbit */ 604 err = phy_write(phydev, 0x15, 0x1048); 605 if (err < 0) 606 return err; 607 608 err = marvell_of_reg_init(phydev); 609 if (err < 0) 610 return err; 611 612 /* Reset address */ 613 err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0); 614 if (err < 0) 615 return err; 616 617 return phy_write(phydev, MII_BMCR, BMCR_RESET); 618 } 619 620 static int m88e1145_config_init(struct phy_device *phydev) 621 { 622 int err; 623 624 /* Take care of errata E0 & E1 */ 625 err = phy_write(phydev, 0x1d, 0x001b); 626 if (err < 0) 627 return err; 628 629 err = phy_write(phydev, 0x1e, 0x418f); 630 if (err < 0) 631 return err; 632 633 err = phy_write(phydev, 0x1d, 0x0016); 634 if (err < 0) 635 return err; 636 637 err = phy_write(phydev, 0x1e, 0xa2da); 638 if (err < 0) 639 return err; 640 641 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) { 642 int temp = phy_read(phydev, MII_M1145_PHY_EXT_CR); 643 if (temp < 0) 644 return temp; 645 646 temp |= (MII_M1145_RGMII_RX_DELAY | MII_M1145_RGMII_TX_DELAY); 647 648 err = phy_write(phydev, MII_M1145_PHY_EXT_CR, temp); 649 if (err < 0) 650 return err; 651 652 if (phydev->dev_flags & MARVELL_PHY_M1145_FLAGS_RESISTANCE) { 653 err = phy_write(phydev, 0x1d, 0x0012); 654 if (err < 0) 655 return err; 656 657 temp = phy_read(phydev, 0x1e); 658 if (temp < 0) 659 return temp; 660 661 temp &= 0xf03f; 662 temp |= 2 << 9; /* 36 ohm */ 663 temp |= 2 << 6; /* 39 ohm */ 664 665 err = phy_write(phydev, 0x1e, temp); 666 if (err < 0) 667 return err; 668 669 err = phy_write(phydev, 0x1d, 0x3); 670 if (err < 0) 671 return err; 672 673 err = phy_write(phydev, 0x1e, 0x8000); 674 if (err < 0) 675 return err; 676 } 677 } 678 679 err = marvell_of_reg_init(phydev); 680 if (err < 0) 681 return err; 682 683 return 0; 684 } 685 686 /* marvell_read_status 687 * 688 * Generic status code does not detect Fiber correctly! 689 * Description: 690 * Check the link, then figure out the current state 691 * by comparing what we advertise with what the link partner 692 * advertises. Start by checking the gigabit possibilities, 693 * then move on to 10/100. 694 */ 695 static int marvell_read_status(struct phy_device *phydev) 696 { 697 int adv; 698 int err; 699 int lpa; 700 int status = 0; 701 702 /* Update the link, but return if there 703 * was an error */ 704 err = genphy_update_link(phydev); 705 if (err) 706 return err; 707 708 if (AUTONEG_ENABLE == phydev->autoneg) { 709 status = phy_read(phydev, MII_M1011_PHY_STATUS); 710 if (status < 0) 711 return status; 712 713 lpa = phy_read(phydev, MII_LPA); 714 if (lpa < 0) 715 return lpa; 716 717 adv = phy_read(phydev, MII_ADVERTISE); 718 if (adv < 0) 719 return adv; 720 721 lpa &= adv; 722 723 if (status & MII_M1011_PHY_STATUS_FULLDUPLEX) 724 phydev->duplex = DUPLEX_FULL; 725 else 726 phydev->duplex = DUPLEX_HALF; 727 728 status = status & MII_M1011_PHY_STATUS_SPD_MASK; 729 phydev->pause = phydev->asym_pause = 0; 730 731 switch (status) { 732 case MII_M1011_PHY_STATUS_1000: 733 phydev->speed = SPEED_1000; 734 break; 735 736 case MII_M1011_PHY_STATUS_100: 737 phydev->speed = SPEED_100; 738 break; 739 740 default: 741 phydev->speed = SPEED_10; 742 break; 743 } 744 745 if (phydev->duplex == DUPLEX_FULL) { 746 phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0; 747 phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0; 748 } 749 } else { 750 int bmcr = phy_read(phydev, MII_BMCR); 751 752 if (bmcr < 0) 753 return bmcr; 754 755 if (bmcr & BMCR_FULLDPLX) 756 phydev->duplex = DUPLEX_FULL; 757 else 758 phydev->duplex = DUPLEX_HALF; 759 760 if (bmcr & BMCR_SPEED1000) 761 phydev->speed = SPEED_1000; 762 else if (bmcr & BMCR_SPEED100) 763 phydev->speed = SPEED_100; 764 else 765 phydev->speed = SPEED_10; 766 767 phydev->pause = phydev->asym_pause = 0; 768 } 769 770 return 0; 771 } 772 773 static int m88e1121_did_interrupt(struct phy_device *phydev) 774 { 775 int imask; 776 777 imask = phy_read(phydev, MII_M1011_IEVENT); 778 779 if (imask & MII_M1011_IMASK_INIT) 780 return 1; 781 782 return 0; 783 } 784 785 static void m88e1318_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) 786 { 787 wol->supported = WAKE_MAGIC; 788 wol->wolopts = 0; 789 790 if (phy_write(phydev, MII_MARVELL_PHY_PAGE, 791 MII_88E1318S_PHY_WOL_PAGE) < 0) 792 return; 793 794 if (phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL) & 795 MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE) 796 wol->wolopts |= WAKE_MAGIC; 797 798 if (phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x00) < 0) 799 return; 800 } 801 802 static int m88e1318_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) 803 { 804 int err, oldpage, temp; 805 806 oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); 807 808 if (wol->wolopts & WAKE_MAGIC) { 809 /* Explicitly switch to page 0x00, just to be sure */ 810 err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x00); 811 if (err < 0) 812 return err; 813 814 /* Enable the WOL interrupt */ 815 temp = phy_read(phydev, MII_88E1318S_PHY_CSIER); 816 temp |= MII_88E1318S_PHY_CSIER_WOL_EIE; 817 err = phy_write(phydev, MII_88E1318S_PHY_CSIER, temp); 818 if (err < 0) 819 return err; 820 821 err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 822 MII_88E1318S_PHY_LED_PAGE); 823 if (err < 0) 824 return err; 825 826 /* Setup LED[2] as interrupt pin (active low) */ 827 temp = phy_read(phydev, MII_88E1318S_PHY_LED_TCR); 828 temp &= ~MII_88E1318S_PHY_LED_TCR_FORCE_INT; 829 temp |= MII_88E1318S_PHY_LED_TCR_INTn_ENABLE; 830 temp |= MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW; 831 err = phy_write(phydev, MII_88E1318S_PHY_LED_TCR, temp); 832 if (err < 0) 833 return err; 834 835 err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 836 MII_88E1318S_PHY_WOL_PAGE); 837 if (err < 0) 838 return err; 839 840 /* Store the device address for the magic packet */ 841 err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD2, 842 ((phydev->attached_dev->dev_addr[5] << 8) | 843 phydev->attached_dev->dev_addr[4])); 844 if (err < 0) 845 return err; 846 err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD1, 847 ((phydev->attached_dev->dev_addr[3] << 8) | 848 phydev->attached_dev->dev_addr[2])); 849 if (err < 0) 850 return err; 851 err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD0, 852 ((phydev->attached_dev->dev_addr[1] << 8) | 853 phydev->attached_dev->dev_addr[0])); 854 if (err < 0) 855 return err; 856 857 /* Clear WOL status and enable magic packet matching */ 858 temp = phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL); 859 temp |= MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS; 860 temp |= MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE; 861 err = phy_write(phydev, MII_88E1318S_PHY_WOL_CTRL, temp); 862 if (err < 0) 863 return err; 864 } else { 865 err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 866 MII_88E1318S_PHY_WOL_PAGE); 867 if (err < 0) 868 return err; 869 870 /* Clear WOL status and disable magic packet matching */ 871 temp = phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL); 872 temp |= MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS; 873 temp &= ~MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE; 874 err = phy_write(phydev, MII_88E1318S_PHY_WOL_CTRL, temp); 875 if (err < 0) 876 return err; 877 } 878 879 err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); 880 if (err < 0) 881 return err; 882 883 return 0; 884 } 885 886 static struct phy_driver marvell_drivers[] = { 887 { 888 .phy_id = MARVELL_PHY_ID_88E1101, 889 .phy_id_mask = MARVELL_PHY_ID_MASK, 890 .name = "Marvell 88E1101", 891 .features = PHY_GBIT_FEATURES, 892 .flags = PHY_HAS_INTERRUPT, 893 .config_aneg = &marvell_config_aneg, 894 .read_status = &genphy_read_status, 895 .ack_interrupt = &marvell_ack_interrupt, 896 .config_intr = &marvell_config_intr, 897 .driver = { .owner = THIS_MODULE }, 898 }, 899 { 900 .phy_id = MARVELL_PHY_ID_88E1112, 901 .phy_id_mask = MARVELL_PHY_ID_MASK, 902 .name = "Marvell 88E1112", 903 .features = PHY_GBIT_FEATURES, 904 .flags = PHY_HAS_INTERRUPT, 905 .config_init = &m88e1111_config_init, 906 .config_aneg = &marvell_config_aneg, 907 .read_status = &genphy_read_status, 908 .ack_interrupt = &marvell_ack_interrupt, 909 .config_intr = &marvell_config_intr, 910 .driver = { .owner = THIS_MODULE }, 911 }, 912 { 913 .phy_id = MARVELL_PHY_ID_88E1111, 914 .phy_id_mask = MARVELL_PHY_ID_MASK, 915 .name = "Marvell 88E1111", 916 .features = PHY_GBIT_FEATURES, 917 .flags = PHY_HAS_INTERRUPT, 918 .config_init = &m88e1111_config_init, 919 .config_aneg = &marvell_config_aneg, 920 .read_status = &marvell_read_status, 921 .ack_interrupt = &marvell_ack_interrupt, 922 .config_intr = &marvell_config_intr, 923 .driver = { .owner = THIS_MODULE }, 924 }, 925 { 926 .phy_id = MARVELL_PHY_ID_88E1118, 927 .phy_id_mask = MARVELL_PHY_ID_MASK, 928 .name = "Marvell 88E1118", 929 .features = PHY_GBIT_FEATURES, 930 .flags = PHY_HAS_INTERRUPT, 931 .config_init = &m88e1118_config_init, 932 .config_aneg = &m88e1118_config_aneg, 933 .read_status = &genphy_read_status, 934 .ack_interrupt = &marvell_ack_interrupt, 935 .config_intr = &marvell_config_intr, 936 .driver = {.owner = THIS_MODULE,}, 937 }, 938 { 939 .phy_id = MARVELL_PHY_ID_88E1121R, 940 .phy_id_mask = MARVELL_PHY_ID_MASK, 941 .name = "Marvell 88E1121R", 942 .features = PHY_GBIT_FEATURES, 943 .flags = PHY_HAS_INTERRUPT, 944 .config_aneg = &m88e1121_config_aneg, 945 .read_status = &marvell_read_status, 946 .ack_interrupt = &marvell_ack_interrupt, 947 .config_intr = &marvell_config_intr, 948 .did_interrupt = &m88e1121_did_interrupt, 949 .driver = { .owner = THIS_MODULE }, 950 }, 951 { 952 .phy_id = MARVELL_PHY_ID_88E1318S, 953 .phy_id_mask = MARVELL_PHY_ID_MASK, 954 .name = "Marvell 88E1318S", 955 .features = PHY_GBIT_FEATURES, 956 .flags = PHY_HAS_INTERRUPT, 957 .config_aneg = &m88e1318_config_aneg, 958 .read_status = &marvell_read_status, 959 .ack_interrupt = &marvell_ack_interrupt, 960 .config_intr = &marvell_config_intr, 961 .did_interrupt = &m88e1121_did_interrupt, 962 .get_wol = &m88e1318_get_wol, 963 .set_wol = &m88e1318_set_wol, 964 .driver = { .owner = THIS_MODULE }, 965 }, 966 { 967 .phy_id = MARVELL_PHY_ID_88E1145, 968 .phy_id_mask = MARVELL_PHY_ID_MASK, 969 .name = "Marvell 88E1145", 970 .features = PHY_GBIT_FEATURES, 971 .flags = PHY_HAS_INTERRUPT, 972 .config_init = &m88e1145_config_init, 973 .config_aneg = &marvell_config_aneg, 974 .read_status = &genphy_read_status, 975 .ack_interrupt = &marvell_ack_interrupt, 976 .config_intr = &marvell_config_intr, 977 .driver = { .owner = THIS_MODULE }, 978 }, 979 { 980 .phy_id = MARVELL_PHY_ID_88E1149R, 981 .phy_id_mask = MARVELL_PHY_ID_MASK, 982 .name = "Marvell 88E1149R", 983 .features = PHY_GBIT_FEATURES, 984 .flags = PHY_HAS_INTERRUPT, 985 .config_init = &m88e1149_config_init, 986 .config_aneg = &m88e1118_config_aneg, 987 .read_status = &genphy_read_status, 988 .ack_interrupt = &marvell_ack_interrupt, 989 .config_intr = &marvell_config_intr, 990 .driver = { .owner = THIS_MODULE }, 991 }, 992 { 993 .phy_id = MARVELL_PHY_ID_88E1240, 994 .phy_id_mask = MARVELL_PHY_ID_MASK, 995 .name = "Marvell 88E1240", 996 .features = PHY_GBIT_FEATURES, 997 .flags = PHY_HAS_INTERRUPT, 998 .config_init = &m88e1111_config_init, 999 .config_aneg = &marvell_config_aneg, 1000 .read_status = &genphy_read_status, 1001 .ack_interrupt = &marvell_ack_interrupt, 1002 .config_intr = &marvell_config_intr, 1003 .driver = { .owner = THIS_MODULE }, 1004 }, 1005 { 1006 .phy_id = MARVELL_PHY_ID_88E1116R, 1007 .phy_id_mask = MARVELL_PHY_ID_MASK, 1008 .name = "Marvell 88E1116R", 1009 .features = PHY_GBIT_FEATURES, 1010 .flags = PHY_HAS_INTERRUPT, 1011 .config_init = &m88e1116r_config_init, 1012 .config_aneg = &genphy_config_aneg, 1013 .read_status = &genphy_read_status, 1014 .ack_interrupt = &marvell_ack_interrupt, 1015 .config_intr = &marvell_config_intr, 1016 .driver = { .owner = THIS_MODULE }, 1017 }, 1018 { 1019 .phy_id = MARVELL_PHY_ID_88E1510, 1020 .phy_id_mask = MARVELL_PHY_ID_MASK, 1021 .name = "Marvell 88E1510", 1022 .features = PHY_GBIT_FEATURES, 1023 .flags = PHY_HAS_INTERRUPT, 1024 .config_aneg = &m88e1510_config_aneg, 1025 .read_status = &marvell_read_status, 1026 .ack_interrupt = &marvell_ack_interrupt, 1027 .config_intr = &marvell_config_intr, 1028 .did_interrupt = &m88e1121_did_interrupt, 1029 .driver = { .owner = THIS_MODULE }, 1030 }, 1031 }; 1032 1033 static int __init marvell_init(void) 1034 { 1035 return phy_drivers_register(marvell_drivers, 1036 ARRAY_SIZE(marvell_drivers)); 1037 } 1038 1039 static void __exit marvell_exit(void) 1040 { 1041 phy_drivers_unregister(marvell_drivers, 1042 ARRAY_SIZE(marvell_drivers)); 1043 } 1044 1045 module_init(marvell_init); 1046 module_exit(marvell_exit); 1047 1048 static struct mdio_device_id __maybe_unused marvell_tbl[] = { 1049 { MARVELL_PHY_ID_88E1101, MARVELL_PHY_ID_MASK }, 1050 { MARVELL_PHY_ID_88E1112, MARVELL_PHY_ID_MASK }, 1051 { MARVELL_PHY_ID_88E1111, MARVELL_PHY_ID_MASK }, 1052 { MARVELL_PHY_ID_88E1118, MARVELL_PHY_ID_MASK }, 1053 { MARVELL_PHY_ID_88E1121R, MARVELL_PHY_ID_MASK }, 1054 { MARVELL_PHY_ID_88E1145, MARVELL_PHY_ID_MASK }, 1055 { MARVELL_PHY_ID_88E1149R, MARVELL_PHY_ID_MASK }, 1056 { MARVELL_PHY_ID_88E1240, MARVELL_PHY_ID_MASK }, 1057 { MARVELL_PHY_ID_88E1318S, MARVELL_PHY_ID_MASK }, 1058 { MARVELL_PHY_ID_88E1116R, MARVELL_PHY_ID_MASK }, 1059 { MARVELL_PHY_ID_88E1510, MARVELL_PHY_ID_MASK }, 1060 { } 1061 }; 1062 1063 MODULE_DEVICE_TABLE(mdio, marvell_tbl); 1064