1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Driver for the Texas Instruments DP83TC811 PHY 4 * 5 * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ 6 * 7 */ 8 9 #include <linux/ethtool.h> 10 #include <linux/etherdevice.h> 11 #include <linux/kernel.h> 12 #include <linux/mii.h> 13 #include <linux/module.h> 14 #include <linux/of.h> 15 #include <linux/phy.h> 16 #include <linux/netdevice.h> 17 18 #define DP83TC811_PHY_ID 0x2000a253 19 #define DP83811_DEVADDR 0x1f 20 21 #define MII_DP83811_SGMII_CTRL 0x09 22 #define MII_DP83811_INT_STAT1 0x12 23 #define MII_DP83811_INT_STAT2 0x13 24 #define MII_DP83811_INT_STAT3 0x18 25 #define MII_DP83811_RESET_CTRL 0x1f 26 27 #define DP83811_HW_RESET BIT(15) 28 #define DP83811_SW_RESET BIT(14) 29 30 /* INT_STAT1 bits */ 31 #define DP83811_RX_ERR_HF_INT_EN BIT(0) 32 #define DP83811_MS_TRAINING_INT_EN BIT(1) 33 #define DP83811_ANEG_COMPLETE_INT_EN BIT(2) 34 #define DP83811_ESD_EVENT_INT_EN BIT(3) 35 #define DP83811_WOL_INT_EN BIT(4) 36 #define DP83811_LINK_STAT_INT_EN BIT(5) 37 #define DP83811_ENERGY_DET_INT_EN BIT(6) 38 #define DP83811_LINK_QUAL_INT_EN BIT(7) 39 40 /* INT_STAT2 bits */ 41 #define DP83811_JABBER_DET_INT_EN BIT(0) 42 #define DP83811_POLARITY_INT_EN BIT(1) 43 #define DP83811_SLEEP_MODE_INT_EN BIT(2) 44 #define DP83811_OVERTEMP_INT_EN BIT(3) 45 #define DP83811_OVERVOLTAGE_INT_EN BIT(6) 46 #define DP83811_UNDERVOLTAGE_INT_EN BIT(7) 47 48 /* INT_STAT3 bits */ 49 #define DP83811_LPS_INT_EN BIT(0) 50 #define DP83811_NO_FRAME_INT_EN BIT(3) 51 #define DP83811_POR_DONE_INT_EN BIT(4) 52 53 #define MII_DP83811_RXSOP1 0x04a5 54 #define MII_DP83811_RXSOP2 0x04a6 55 #define MII_DP83811_RXSOP3 0x04a7 56 57 /* WoL Registers */ 58 #define MII_DP83811_WOL_CFG 0x04a0 59 #define MII_DP83811_WOL_STAT 0x04a1 60 #define MII_DP83811_WOL_DA1 0x04a2 61 #define MII_DP83811_WOL_DA2 0x04a3 62 #define MII_DP83811_WOL_DA3 0x04a4 63 64 /* WoL bits */ 65 #define DP83811_WOL_MAGIC_EN BIT(0) 66 #define DP83811_WOL_SECURE_ON BIT(5) 67 #define DP83811_WOL_EN BIT(7) 68 #define DP83811_WOL_INDICATION_SEL BIT(8) 69 #define DP83811_WOL_CLR_INDICATION BIT(11) 70 71 /* SGMII CTRL bits */ 72 #define DP83811_TDR_AUTO BIT(8) 73 #define DP83811_SGMII_EN BIT(12) 74 #define DP83811_SGMII_AUTO_NEG_EN BIT(13) 75 #define DP83811_SGMII_TX_ERR_DIS BIT(14) 76 #define DP83811_SGMII_SOFT_RESET BIT(15) 77 78 static int dp83811_ack_interrupt(struct phy_device *phydev) 79 { 80 int err; 81 82 err = phy_read(phydev, MII_DP83811_INT_STAT1); 83 if (err < 0) 84 return err; 85 86 err = phy_read(phydev, MII_DP83811_INT_STAT2); 87 if (err < 0) 88 return err; 89 90 err = phy_read(phydev, MII_DP83811_INT_STAT3); 91 if (err < 0) 92 return err; 93 94 return 0; 95 } 96 97 static int dp83811_set_wol(struct phy_device *phydev, 98 struct ethtool_wolinfo *wol) 99 { 100 struct net_device *ndev = phydev->attached_dev; 101 const u8 *mac; 102 u16 value; 103 104 if (wol->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE)) { 105 mac = (const u8 *)ndev->dev_addr; 106 107 if (!is_valid_ether_addr(mac)) 108 return -EINVAL; 109 110 /* MAC addresses start with byte 5, but stored in mac[0]. 111 * 811 PHYs store bytes 4|5, 2|3, 0|1 112 */ 113 phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_DA1, 114 (mac[1] << 8) | mac[0]); 115 phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_DA2, 116 (mac[3] << 8) | mac[2]); 117 phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_DA3, 118 (mac[5] << 8) | mac[4]); 119 120 value = phy_read_mmd(phydev, DP83811_DEVADDR, 121 MII_DP83811_WOL_CFG); 122 if (wol->wolopts & WAKE_MAGIC) 123 value |= DP83811_WOL_MAGIC_EN; 124 else 125 value &= ~DP83811_WOL_MAGIC_EN; 126 127 if (wol->wolopts & WAKE_MAGICSECURE) { 128 phy_write_mmd(phydev, DP83811_DEVADDR, 129 MII_DP83811_RXSOP1, 130 (wol->sopass[1] << 8) | wol->sopass[0]); 131 phy_write_mmd(phydev, DP83811_DEVADDR, 132 MII_DP83811_RXSOP2, 133 (wol->sopass[3] << 8) | wol->sopass[2]); 134 phy_write_mmd(phydev, DP83811_DEVADDR, 135 MII_DP83811_RXSOP3, 136 (wol->sopass[5] << 8) | wol->sopass[4]); 137 value |= DP83811_WOL_SECURE_ON; 138 } else { 139 value &= ~DP83811_WOL_SECURE_ON; 140 } 141 142 value |= (DP83811_WOL_EN | DP83811_WOL_INDICATION_SEL | 143 DP83811_WOL_CLR_INDICATION); 144 phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG, 145 value); 146 } else { 147 value = phy_read_mmd(phydev, DP83811_DEVADDR, 148 MII_DP83811_WOL_CFG); 149 value &= ~DP83811_WOL_EN; 150 phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG, 151 value); 152 } 153 154 return 0; 155 } 156 157 static void dp83811_get_wol(struct phy_device *phydev, 158 struct ethtool_wolinfo *wol) 159 { 160 u16 sopass_val; 161 int value; 162 163 wol->supported = (WAKE_MAGIC | WAKE_MAGICSECURE); 164 wol->wolopts = 0; 165 166 value = phy_read_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG); 167 168 if (value & DP83811_WOL_MAGIC_EN) 169 wol->wolopts |= WAKE_MAGIC; 170 171 if (value & DP83811_WOL_SECURE_ON) { 172 sopass_val = phy_read_mmd(phydev, DP83811_DEVADDR, 173 MII_DP83811_RXSOP1); 174 wol->sopass[0] = (sopass_val & 0xff); 175 wol->sopass[1] = (sopass_val >> 8); 176 177 sopass_val = phy_read_mmd(phydev, DP83811_DEVADDR, 178 MII_DP83811_RXSOP2); 179 wol->sopass[2] = (sopass_val & 0xff); 180 wol->sopass[3] = (sopass_val >> 8); 181 182 sopass_val = phy_read_mmd(phydev, DP83811_DEVADDR, 183 MII_DP83811_RXSOP3); 184 wol->sopass[4] = (sopass_val & 0xff); 185 wol->sopass[5] = (sopass_val >> 8); 186 187 wol->wolopts |= WAKE_MAGICSECURE; 188 } 189 190 /* WoL is not enabled so set wolopts to 0 */ 191 if (!(value & DP83811_WOL_EN)) 192 wol->wolopts = 0; 193 } 194 195 static int dp83811_config_intr(struct phy_device *phydev) 196 { 197 int misr_status, err; 198 199 if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { 200 misr_status = phy_read(phydev, MII_DP83811_INT_STAT1); 201 if (misr_status < 0) 202 return misr_status; 203 204 misr_status |= (DP83811_RX_ERR_HF_INT_EN | 205 DP83811_MS_TRAINING_INT_EN | 206 DP83811_ANEG_COMPLETE_INT_EN | 207 DP83811_ESD_EVENT_INT_EN | 208 DP83811_WOL_INT_EN | 209 DP83811_LINK_STAT_INT_EN | 210 DP83811_ENERGY_DET_INT_EN | 211 DP83811_LINK_QUAL_INT_EN); 212 213 err = phy_write(phydev, MII_DP83811_INT_STAT1, misr_status); 214 if (err < 0) 215 return err; 216 217 misr_status = phy_read(phydev, MII_DP83811_INT_STAT2); 218 if (misr_status < 0) 219 return misr_status; 220 221 misr_status |= (DP83811_JABBER_DET_INT_EN | 222 DP83811_POLARITY_INT_EN | 223 DP83811_SLEEP_MODE_INT_EN | 224 DP83811_OVERTEMP_INT_EN | 225 DP83811_OVERVOLTAGE_INT_EN | 226 DP83811_UNDERVOLTAGE_INT_EN); 227 228 err = phy_write(phydev, MII_DP83811_INT_STAT2, misr_status); 229 if (err < 0) 230 return err; 231 232 misr_status = phy_read(phydev, MII_DP83811_INT_STAT3); 233 if (misr_status < 0) 234 return misr_status; 235 236 misr_status |= (DP83811_LPS_INT_EN | 237 DP83811_NO_FRAME_INT_EN | 238 DP83811_POR_DONE_INT_EN); 239 240 err = phy_write(phydev, MII_DP83811_INT_STAT3, misr_status); 241 242 } else { 243 err = phy_write(phydev, MII_DP83811_INT_STAT1, 0); 244 if (err < 0) 245 return err; 246 247 err = phy_write(phydev, MII_DP83811_INT_STAT2, 0); 248 if (err < 0) 249 return err; 250 251 err = phy_write(phydev, MII_DP83811_INT_STAT3, 0); 252 } 253 254 return err; 255 } 256 257 static int dp83811_config_aneg(struct phy_device *phydev) 258 { 259 int value, err; 260 261 if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { 262 value = phy_read(phydev, MII_DP83811_SGMII_CTRL); 263 if (phydev->autoneg == AUTONEG_ENABLE) { 264 err = phy_write(phydev, MII_DP83811_SGMII_CTRL, 265 (DP83811_SGMII_AUTO_NEG_EN | value)); 266 if (err < 0) 267 return err; 268 } else { 269 err = phy_write(phydev, MII_DP83811_SGMII_CTRL, 270 (~DP83811_SGMII_AUTO_NEG_EN & value)); 271 if (err < 0) 272 return err; 273 } 274 } 275 276 return genphy_config_aneg(phydev); 277 } 278 279 static int dp83811_config_init(struct phy_device *phydev) 280 { 281 int value, err; 282 283 err = genphy_config_init(phydev); 284 if (err < 0) 285 return err; 286 287 value = phy_read(phydev, MII_DP83811_SGMII_CTRL); 288 if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { 289 err = phy_write(phydev, MII_DP83811_SGMII_CTRL, 290 (DP83811_SGMII_EN | value)); 291 } else { 292 err = phy_write(phydev, MII_DP83811_SGMII_CTRL, 293 (~DP83811_SGMII_EN & value)); 294 } 295 296 if (err < 0) 297 298 return err; 299 300 value = DP83811_WOL_MAGIC_EN | DP83811_WOL_SECURE_ON | DP83811_WOL_EN; 301 302 return phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG, 303 value); 304 } 305 306 static int dp83811_phy_reset(struct phy_device *phydev) 307 { 308 int err; 309 310 err = phy_write(phydev, MII_DP83811_RESET_CTRL, DP83811_HW_RESET); 311 if (err < 0) 312 return err; 313 314 return 0; 315 } 316 317 static int dp83811_suspend(struct phy_device *phydev) 318 { 319 int value; 320 321 value = phy_read_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG); 322 323 if (!(value & DP83811_WOL_EN)) 324 genphy_suspend(phydev); 325 326 return 0; 327 } 328 329 static int dp83811_resume(struct phy_device *phydev) 330 { 331 int value; 332 333 genphy_resume(phydev); 334 335 value = phy_read_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG); 336 337 phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG, value | 338 DP83811_WOL_CLR_INDICATION); 339 340 return 0; 341 } 342 343 static struct phy_driver dp83811_driver[] = { 344 { 345 .phy_id = DP83TC811_PHY_ID, 346 .phy_id_mask = 0xfffffff0, 347 .name = "TI DP83TC811", 348 .features = PHY_BASIC_FEATURES, 349 .flags = PHY_HAS_INTERRUPT, 350 .config_init = dp83811_config_init, 351 .config_aneg = dp83811_config_aneg, 352 .soft_reset = dp83811_phy_reset, 353 .get_wol = dp83811_get_wol, 354 .set_wol = dp83811_set_wol, 355 .ack_interrupt = dp83811_ack_interrupt, 356 .config_intr = dp83811_config_intr, 357 .suspend = dp83811_suspend, 358 .resume = dp83811_resume, 359 }, 360 }; 361 module_phy_driver(dp83811_driver); 362 363 static struct mdio_device_id __maybe_unused dp83811_tbl[] = { 364 { DP83TC811_PHY_ID, 0xfffffff0 }, 365 { }, 366 }; 367 MODULE_DEVICE_TABLE(mdio, dp83811_tbl); 368 369 MODULE_DESCRIPTION("Texas Instruments DP83TC811 PHY driver"); 370 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com"); 371 MODULE_LICENSE("GPL"); 372