xref: /openbmc/linux/drivers/net/phy/cortina.c (revision f9834f18)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  *    Copyright 2017 NXP
4  *
5  *    CORTINA is a registered trademark of Cortina Systems, Inc.
6  *
7  */
8 #include <linux/module.h>
9 #include <linux/phy.h>
10 
11 #define PHY_ID_CS4340	0x13e51002
12 
13 #define VILLA_GLOBAL_CHIP_ID_LSB			0x0
14 #define VILLA_GLOBAL_CHIP_ID_MSB			0x1
15 
16 #define VILLA_GLOBAL_GPIO_1_INTS			0x017
17 
18 static int cortina_read_reg(struct phy_device *phydev, u16 regnum)
19 {
20 	return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr,
21 			    MII_ADDR_C45 | regnum);
22 }
23 
24 static int cortina_read_status(struct phy_device *phydev)
25 {
26 	int gpio_int_status, ret = 0;
27 
28 	gpio_int_status = cortina_read_reg(phydev, VILLA_GLOBAL_GPIO_1_INTS);
29 	if (gpio_int_status < 0) {
30 		ret = gpio_int_status;
31 		goto err;
32 	}
33 
34 	if (gpio_int_status & 0x8) {
35 		/* up when edc_convergedS set */
36 		phydev->speed = SPEED_10000;
37 		phydev->duplex = DUPLEX_FULL;
38 		phydev->link = 1;
39 	} else {
40 		phydev->link = 0;
41 	}
42 
43 err:
44 	return ret;
45 }
46 
47 static int cortina_probe(struct phy_device *phydev)
48 {
49 	u32 phy_id = 0;
50 	int id_lsb = 0, id_msb = 0;
51 
52 	/* Read device id from phy registers. */
53 	id_lsb = cortina_read_reg(phydev, VILLA_GLOBAL_CHIP_ID_LSB);
54 	if (id_lsb < 0)
55 		return -ENXIO;
56 
57 	phy_id = id_lsb << 16;
58 
59 	id_msb = cortina_read_reg(phydev, VILLA_GLOBAL_CHIP_ID_MSB);
60 	if (id_msb < 0)
61 		return -ENXIO;
62 
63 	phy_id |= id_msb;
64 
65 	/* Make sure the device tree binding matched the driver with the
66 	 * right device.
67 	 */
68 	if (phy_id != phydev->drv->phy_id) {
69 		phydev_err(phydev, "Error matching phy with %s driver\n",
70 			   phydev->drv->name);
71 		return -ENODEV;
72 	}
73 
74 	return 0;
75 }
76 
77 static struct phy_driver cortina_driver[] = {
78 {
79 	.phy_id		= PHY_ID_CS4340,
80 	.phy_id_mask	= 0xffffffff,
81 	.name		= "Cortina CS4340",
82 	.features       = PHY_10GBIT_FEATURES,
83 	.config_aneg	= gen10g_config_aneg,
84 	.read_status	= cortina_read_status,
85 	.soft_reset	= genphy_no_soft_reset,
86 	.probe		= cortina_probe,
87 },
88 };
89 
90 module_phy_driver(cortina_driver);
91 
92 static struct mdio_device_id __maybe_unused cortina_tbl[] = {
93 	{ PHY_ID_CS4340, 0xffffffff},
94 	{},
95 };
96 
97 MODULE_DEVICE_TABLE(mdio, cortina_tbl);
98 
99 MODULE_DESCRIPTION("Cortina EDC CDR 10G Ethernet PHY driver");
100 MODULE_AUTHOR("NXP");
101 MODULE_LICENSE("GPL");
102