xref: /openbmc/linux/drivers/net/phy/cortina.c (revision d9fd5a71)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  *    Copyright 2017 NXP
4  *
5  *    CORTINA is a registered trademark of Cortina Systems, Inc.
6  *
7  */
8 #include <linux/module.h>
9 #include <linux/phy.h>
10 
11 #define PHY_ID_CS4340	0x13e51002
12 
13 #define VILLA_GLOBAL_CHIP_ID_LSB			0x0
14 #define VILLA_GLOBAL_CHIP_ID_MSB			0x1
15 
16 #define VILLA_GLOBAL_GPIO_1_INTS			0x017
17 
18 static int cortina_read_reg(struct phy_device *phydev, u16 regnum)
19 {
20 	return mdiobus_c45_read(phydev->mdio.bus, phydev->mdio.addr, 0, regnum);
21 }
22 
23 static int cortina_read_status(struct phy_device *phydev)
24 {
25 	int gpio_int_status, ret = 0;
26 
27 	gpio_int_status = cortina_read_reg(phydev, VILLA_GLOBAL_GPIO_1_INTS);
28 	if (gpio_int_status < 0) {
29 		ret = gpio_int_status;
30 		goto err;
31 	}
32 
33 	if (gpio_int_status & 0x8) {
34 		/* up when edc_convergedS set */
35 		phydev->speed = SPEED_10000;
36 		phydev->duplex = DUPLEX_FULL;
37 		phydev->link = 1;
38 	} else {
39 		phydev->link = 0;
40 	}
41 
42 err:
43 	return ret;
44 }
45 
46 static int cortina_probe(struct phy_device *phydev)
47 {
48 	u32 phy_id = 0;
49 	int id_lsb = 0, id_msb = 0;
50 
51 	/* Read device id from phy registers. */
52 	id_lsb = cortina_read_reg(phydev, VILLA_GLOBAL_CHIP_ID_LSB);
53 	if (id_lsb < 0)
54 		return -ENXIO;
55 
56 	phy_id = id_lsb << 16;
57 
58 	id_msb = cortina_read_reg(phydev, VILLA_GLOBAL_CHIP_ID_MSB);
59 	if (id_msb < 0)
60 		return -ENXIO;
61 
62 	phy_id |= id_msb;
63 
64 	/* Make sure the device tree binding matched the driver with the
65 	 * right device.
66 	 */
67 	if (phy_id != phydev->drv->phy_id) {
68 		phydev_err(phydev, "Error matching phy with %s driver\n",
69 			   phydev->drv->name);
70 		return -ENODEV;
71 	}
72 
73 	return 0;
74 }
75 
76 static struct phy_driver cortina_driver[] = {
77 {
78 	.phy_id		= PHY_ID_CS4340,
79 	.phy_id_mask	= 0xffffffff,
80 	.name		= "Cortina CS4340",
81 	.features       = PHY_10GBIT_FEATURES,
82 	.config_aneg	= gen10g_config_aneg,
83 	.read_status	= cortina_read_status,
84 	.probe		= cortina_probe,
85 },
86 };
87 
88 module_phy_driver(cortina_driver);
89 
90 static struct mdio_device_id __maybe_unused cortina_tbl[] = {
91 	{ PHY_ID_CS4340, 0xffffffff},
92 	{},
93 };
94 
95 MODULE_DEVICE_TABLE(mdio, cortina_tbl);
96 
97 MODULE_DESCRIPTION("Cortina EDC CDR 10G Ethernet PHY driver");
98 MODULE_AUTHOR("NXP");
99 MODULE_LICENSE("GPL");
100