xref: /openbmc/linux/drivers/net/phy/cortina.c (revision 6d99a79c)
1 /*
2  *    Copyright 2017 NXP
3  *
4  *    This program is free software; you can redistribute it and/or modify
5  *    it under the terms of the GNU General Public License as published by
6  *    the Free Software Foundation; either version 2 of the License, or
7  *    (at your option) any later version.
8  *
9  *    This program is distributed in the hope that it will be useful,
10  *    but WITHOUT ANY WARRANTY; without even the implied warranty of
11  *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12  *    GNU General Public License for more details.
13  *
14  *    CORTINA is a registered trademark of Cortina Systems, Inc.
15  *
16  */
17 #include <linux/module.h>
18 #include <linux/phy.h>
19 
20 #define PHY_ID_CS4340	0x13e51002
21 
22 #define VILLA_GLOBAL_CHIP_ID_LSB			0x0
23 #define VILLA_GLOBAL_CHIP_ID_MSB			0x1
24 
25 #define VILLA_GLOBAL_GPIO_1_INTS			0x017
26 
27 static int cortina_read_reg(struct phy_device *phydev, u16 regnum)
28 {
29 	return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr,
30 			    MII_ADDR_C45 | regnum);
31 }
32 
33 static int cortina_read_status(struct phy_device *phydev)
34 {
35 	int gpio_int_status, ret = 0;
36 
37 	gpio_int_status = cortina_read_reg(phydev, VILLA_GLOBAL_GPIO_1_INTS);
38 	if (gpio_int_status < 0) {
39 		ret = gpio_int_status;
40 		goto err;
41 	}
42 
43 	if (gpio_int_status & 0x8) {
44 		/* up when edc_convergedS set */
45 		phydev->speed = SPEED_10000;
46 		phydev->duplex = DUPLEX_FULL;
47 		phydev->link = 1;
48 	} else {
49 		phydev->link = 0;
50 	}
51 
52 err:
53 	return ret;
54 }
55 
56 static int cortina_probe(struct phy_device *phydev)
57 {
58 	u32 phy_id = 0;
59 	int id_lsb = 0, id_msb = 0;
60 
61 	/* Read device id from phy registers. */
62 	id_lsb = cortina_read_reg(phydev, VILLA_GLOBAL_CHIP_ID_LSB);
63 	if (id_lsb < 0)
64 		return -ENXIO;
65 
66 	phy_id = id_lsb << 16;
67 
68 	id_msb = cortina_read_reg(phydev, VILLA_GLOBAL_CHIP_ID_MSB);
69 	if (id_msb < 0)
70 		return -ENXIO;
71 
72 	phy_id |= id_msb;
73 
74 	/* Make sure the device tree binding matched the driver with the
75 	 * right device.
76 	 */
77 	if (phy_id != phydev->drv->phy_id) {
78 		phydev_err(phydev, "Error matching phy with %s driver\n",
79 			   phydev->drv->name);
80 		return -ENODEV;
81 	}
82 
83 	return 0;
84 }
85 
86 static struct phy_driver cortina_driver[] = {
87 {
88 	.phy_id		= PHY_ID_CS4340,
89 	.phy_id_mask	= 0xffffffff,
90 	.name		= "Cortina CS4340",
91 	.config_init	= gen10g_config_init,
92 	.config_aneg	= gen10g_config_aneg,
93 	.read_status	= cortina_read_status,
94 	.soft_reset	= gen10g_no_soft_reset,
95 	.probe		= cortina_probe,
96 },
97 };
98 
99 module_phy_driver(cortina_driver);
100 
101 static struct mdio_device_id __maybe_unused cortina_tbl[] = {
102 	{ PHY_ID_CS4340, 0xffffffff},
103 	{},
104 };
105 
106 MODULE_DEVICE_TABLE(mdio, cortina_tbl);
107 
108 MODULE_DESCRIPTION("Cortina EDC CDR 10G Ethernet PHY driver");
109 MODULE_AUTHOR("NXP");
110 MODULE_LICENSE("GPL");
111