xref: /openbmc/linux/drivers/net/phy/cortina.c (revision 6aa7de05)
1 /*
2  *    Copyright 2017 NXP
3  *
4  *    This program is free software; you can redistribute it and/or modify
5  *    it under the terms of the GNU General Public License as published by
6  *    the Free Software Foundation; either version 2 of the License, or
7  *    (at your option) any later version.
8  *
9  *    This program is distributed in the hope that it will be useful,
10  *    but WITHOUT ANY WARRANTY; without even the implied warranty of
11  *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12  *    GNU General Public License for more details.
13  *
14  *    CORTINA is a registered trademark of Cortina Systems, Inc.
15  *
16  */
17 #include <linux/module.h>
18 #include <linux/phy.h>
19 
20 #define PHY_ID_CS4340	0x13e51002
21 
22 #define VILLA_GLOBAL_CHIP_ID_LSB			0x0
23 #define VILLA_GLOBAL_CHIP_ID_MSB			0x1
24 
25 #define VILLA_GLOBAL_GPIO_1_INTS			0x017
26 
27 static int cortina_read_reg(struct phy_device *phydev, u16 regnum)
28 {
29 	return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr,
30 			    MII_ADDR_C45 | regnum);
31 }
32 
33 static int cortina_config_aneg(struct phy_device *phydev)
34 {
35 	phydev->supported = SUPPORTED_10000baseT_Full;
36 	phydev->advertising = SUPPORTED_10000baseT_Full;
37 
38 	return 0;
39 }
40 
41 static int cortina_read_status(struct phy_device *phydev)
42 {
43 	int gpio_int_status, ret = 0;
44 
45 	gpio_int_status = cortina_read_reg(phydev, VILLA_GLOBAL_GPIO_1_INTS);
46 	if (gpio_int_status < 0) {
47 		ret = gpio_int_status;
48 		goto err;
49 	}
50 
51 	if (gpio_int_status & 0x8) {
52 		/* up when edc_convergedS set */
53 		phydev->speed = SPEED_10000;
54 		phydev->duplex = DUPLEX_FULL;
55 		phydev->link = 1;
56 	} else {
57 		phydev->link = 0;
58 	}
59 
60 err:
61 	return ret;
62 }
63 
64 static int cortina_soft_reset(struct phy_device *phydev)
65 {
66 	return 0;
67 }
68 
69 static int cortina_probe(struct phy_device *phydev)
70 {
71 	u32 phy_id = 0;
72 	int id_lsb = 0, id_msb = 0;
73 
74 	/* Read device id from phy registers. */
75 	id_lsb = cortina_read_reg(phydev, VILLA_GLOBAL_CHIP_ID_LSB);
76 	if (id_lsb < 0)
77 		return -ENXIO;
78 
79 	phy_id = id_lsb << 16;
80 
81 	id_msb = cortina_read_reg(phydev, VILLA_GLOBAL_CHIP_ID_MSB);
82 	if (id_msb < 0)
83 		return -ENXIO;
84 
85 	phy_id |= id_msb;
86 
87 	/* Make sure the device tree binding matched the driver with the
88 	 * right device.
89 	 */
90 	if (phy_id != phydev->drv->phy_id) {
91 		phydev_err(phydev, "Error matching phy with %s driver\n",
92 			   phydev->drv->name);
93 		return -ENODEV;
94 	}
95 
96 	return 0;
97 }
98 
99 static struct phy_driver cortina_driver[] = {
100 {
101 	.phy_id		= PHY_ID_CS4340,
102 	.phy_id_mask	= 0xffffffff,
103 	.name		= "Cortina CS4340",
104 	.config_aneg	= cortina_config_aneg,
105 	.read_status	= cortina_read_status,
106 	.soft_reset	= cortina_soft_reset,
107 	.probe		= cortina_probe,
108 },
109 };
110 
111 module_phy_driver(cortina_driver);
112 
113 static struct mdio_device_id __maybe_unused cortina_tbl[] = {
114 	{ PHY_ID_CS4340, 0xffffffff},
115 	{},
116 };
117 
118 MODULE_DEVICE_TABLE(mdio, cortina_tbl);
119