1 // SPDX-License-Identifier: GPL-2.0+ 2 /* Broadcom BCM54140 Quad SGMII/QSGMII Copper/Fiber Gigabit PHY 3 * 4 * Copyright (c) 2020 Michael Walle <michael@walle.cc> 5 */ 6 7 #include <linux/bitfield.h> 8 #include <linux/brcmphy.h> 9 #include <linux/hwmon.h> 10 #include <linux/module.h> 11 #include <linux/phy.h> 12 13 #include "bcm-phy-lib.h" 14 15 /* RDB per-port registers 16 */ 17 #define BCM54140_RDB_ISR 0x00a /* interrupt status */ 18 #define BCM54140_RDB_IMR 0x00b /* interrupt mask */ 19 #define BCM54140_RDB_INT_LINK BIT(1) /* link status changed */ 20 #define BCM54140_RDB_INT_SPEED BIT(2) /* link speed change */ 21 #define BCM54140_RDB_INT_DUPLEX BIT(3) /* duplex mode changed */ 22 #define BCM54140_RDB_SPARE1 0x012 /* spare control 1 */ 23 #define BCM54140_RDB_SPARE1_LSLM BIT(2) /* link speed LED mode */ 24 #define BCM54140_RDB_SPARE2 0x014 /* spare control 2 */ 25 #define BCM54140_RDB_SPARE2_WS_RTRY_DIS BIT(8) /* wirespeed retry disable */ 26 #define BCM54140_RDB_SPARE2_WS_RTRY_LIMIT GENMASK(4, 2) /* retry limit */ 27 #define BCM54140_RDB_SPARE3 0x015 /* spare control 3 */ 28 #define BCM54140_RDB_SPARE3_BIT0 BIT(0) 29 #define BCM54140_RDB_LED_CTRL 0x019 /* LED control */ 30 #define BCM54140_RDB_LED_CTRL_ACTLINK0 BIT(4) 31 #define BCM54140_RDB_LED_CTRL_ACTLINK1 BIT(8) 32 #define BCM54140_RDB_C_APWR 0x01a /* auto power down control */ 33 #define BCM54140_RDB_C_APWR_SINGLE_PULSE BIT(8) /* single pulse */ 34 #define BCM54140_RDB_C_APWR_APD_MODE_DIS 0 /* ADP disable */ 35 #define BCM54140_RDB_C_APWR_APD_MODE_EN 1 /* ADP enable */ 36 #define BCM54140_RDB_C_APWR_APD_MODE_DIS2 2 /* ADP disable */ 37 #define BCM54140_RDB_C_APWR_APD_MODE_EN_ANEG 3 /* ADP enable w/ aneg */ 38 #define BCM54140_RDB_C_APWR_APD_MODE_MASK GENMASK(6, 5) 39 #define BCM54140_RDB_C_APWR_SLP_TIM_MASK BIT(4)/* sleep timer */ 40 #define BCM54140_RDB_C_APWR_SLP_TIM_2_7 0 /* 2.7s */ 41 #define BCM54140_RDB_C_APWR_SLP_TIM_5_4 1 /* 5.4s */ 42 #define BCM54140_RDB_C_PWR 0x02a /* copper power control */ 43 #define BCM54140_RDB_C_PWR_ISOLATE BIT(5) /* super isolate mode */ 44 #define BCM54140_RDB_C_MISC_CTRL 0x02f /* misc copper control */ 45 #define BCM54140_RDB_C_MISC_CTRL_WS_EN BIT(4) /* wirespeed enable */ 46 47 /* RDB global registers 48 */ 49 #define BCM54140_RDB_TOP_IMR 0x82d /* interrupt mask */ 50 #define BCM54140_RDB_TOP_IMR_PORT0 BIT(4) 51 #define BCM54140_RDB_TOP_IMR_PORT1 BIT(5) 52 #define BCM54140_RDB_TOP_IMR_PORT2 BIT(6) 53 #define BCM54140_RDB_TOP_IMR_PORT3 BIT(7) 54 #define BCM54140_RDB_MON_CTRL 0x831 /* monitor control */ 55 #define BCM54140_RDB_MON_CTRL_V_MODE BIT(3) /* voltage mode */ 56 #define BCM54140_RDB_MON_CTRL_SEL_MASK GENMASK(2, 1) 57 #define BCM54140_RDB_MON_CTRL_SEL_TEMP 0 /* meassure temperature */ 58 #define BCM54140_RDB_MON_CTRL_SEL_1V0 1 /* meassure AVDDL 1.0V */ 59 #define BCM54140_RDB_MON_CTRL_SEL_3V3 2 /* meassure AVDDH 3.3V */ 60 #define BCM54140_RDB_MON_CTRL_SEL_RR 3 /* meassure all round-robin */ 61 #define BCM54140_RDB_MON_CTRL_PWR_DOWN BIT(0) /* power-down monitor */ 62 #define BCM54140_RDB_MON_TEMP_VAL 0x832 /* temperature value */ 63 #define BCM54140_RDB_MON_TEMP_MAX 0x833 /* temperature high thresh */ 64 #define BCM54140_RDB_MON_TEMP_MIN 0x834 /* temperature low thresh */ 65 #define BCM54140_RDB_MON_TEMP_DATA_MASK GENMASK(9, 0) 66 #define BCM54140_RDB_MON_1V0_VAL 0x835 /* AVDDL 1.0V value */ 67 #define BCM54140_RDB_MON_1V0_MAX 0x836 /* AVDDL 1.0V high thresh */ 68 #define BCM54140_RDB_MON_1V0_MIN 0x837 /* AVDDL 1.0V low thresh */ 69 #define BCM54140_RDB_MON_1V0_DATA_MASK GENMASK(10, 0) 70 #define BCM54140_RDB_MON_3V3_VAL 0x838 /* AVDDH 3.3V value */ 71 #define BCM54140_RDB_MON_3V3_MAX 0x839 /* AVDDH 3.3V high thresh */ 72 #define BCM54140_RDB_MON_3V3_MIN 0x83a /* AVDDH 3.3V low thresh */ 73 #define BCM54140_RDB_MON_3V3_DATA_MASK GENMASK(11, 0) 74 #define BCM54140_RDB_MON_ISR 0x83b /* interrupt status */ 75 #define BCM54140_RDB_MON_ISR_3V3 BIT(2) /* AVDDH 3.3V alarm */ 76 #define BCM54140_RDB_MON_ISR_1V0 BIT(1) /* AVDDL 1.0V alarm */ 77 #define BCM54140_RDB_MON_ISR_TEMP BIT(0) /* temperature alarm */ 78 79 /* According to the datasheet the formula is: 80 * T = 413.35 - (0.49055 * bits[9:0]) 81 */ 82 #define BCM54140_HWMON_TO_TEMP(v) (413350L - (v) * 491) 83 #define BCM54140_HWMON_FROM_TEMP(v) DIV_ROUND_CLOSEST_ULL(413350L - (v), 491) 84 85 /* According to the datasheet the formula is: 86 * U = bits[11:0] / 1024 * 220 / 0.2 87 * 88 * Normalized: 89 * U = bits[11:0] / 4096 * 2514 90 */ 91 #define BCM54140_HWMON_TO_IN_1V0(v) ((v) * 2514 >> 11) 92 #define BCM54140_HWMON_FROM_IN_1V0(v) DIV_ROUND_CLOSEST_ULL(((v) << 11), 2514) 93 94 /* According to the datasheet the formula is: 95 * U = bits[10:0] / 1024 * 880 / 0.7 96 * 97 * Normalized: 98 * U = bits[10:0] / 2048 * 4400 99 */ 100 #define BCM54140_HWMON_TO_IN_3V3(v) ((v) * 4400 >> 12) 101 #define BCM54140_HWMON_FROM_IN_3V3(v) DIV_ROUND_CLOSEST_ULL(((v) << 12), 4400) 102 103 #define BCM54140_HWMON_TO_IN(ch, v) ((ch) ? BCM54140_HWMON_TO_IN_3V3(v) \ 104 : BCM54140_HWMON_TO_IN_1V0(v)) 105 #define BCM54140_HWMON_FROM_IN(ch, v) ((ch) ? BCM54140_HWMON_FROM_IN_3V3(v) \ 106 : BCM54140_HWMON_FROM_IN_1V0(v)) 107 #define BCM54140_HWMON_IN_MASK(ch) ((ch) ? BCM54140_RDB_MON_3V3_DATA_MASK \ 108 : BCM54140_RDB_MON_1V0_DATA_MASK) 109 #define BCM54140_HWMON_IN_VAL_REG(ch) ((ch) ? BCM54140_RDB_MON_3V3_VAL \ 110 : BCM54140_RDB_MON_1V0_VAL) 111 #define BCM54140_HWMON_IN_MIN_REG(ch) ((ch) ? BCM54140_RDB_MON_3V3_MIN \ 112 : BCM54140_RDB_MON_1V0_MIN) 113 #define BCM54140_HWMON_IN_MAX_REG(ch) ((ch) ? BCM54140_RDB_MON_3V3_MAX \ 114 : BCM54140_RDB_MON_1V0_MAX) 115 #define BCM54140_HWMON_IN_ALARM_BIT(ch) ((ch) ? BCM54140_RDB_MON_ISR_3V3 \ 116 : BCM54140_RDB_MON_ISR_1V0) 117 118 /* This PHY has two different PHY IDs depening on its MODE_SEL pin. This 119 * pin choses between 4x SGMII and QSGMII mode: 120 * AE02_5009 4x SGMII 121 * AE02_5019 QSGMII 122 */ 123 #define BCM54140_PHY_ID_MASK 0xffffffe8 124 125 #define BCM54140_PHY_ID_REV(phy_id) ((phy_id) & 0x7) 126 #define BCM54140_REV_B0 1 127 128 #define BCM54140_DEFAULT_DOWNSHIFT 5 129 #define BCM54140_MAX_DOWNSHIFT 9 130 131 struct bcm54140_priv { 132 int port; 133 int base_addr; 134 #if IS_ENABLED(CONFIG_HWMON) 135 /* protect the alarm bits */ 136 struct mutex alarm_lock; 137 u16 alarm; 138 #endif 139 }; 140 141 #if IS_ENABLED(CONFIG_HWMON) 142 static umode_t bcm54140_hwmon_is_visible(const void *data, 143 enum hwmon_sensor_types type, 144 u32 attr, int channel) 145 { 146 switch (type) { 147 case hwmon_in: 148 switch (attr) { 149 case hwmon_in_min: 150 case hwmon_in_max: 151 return 0644; 152 case hwmon_in_label: 153 case hwmon_in_input: 154 case hwmon_in_alarm: 155 return 0444; 156 default: 157 return 0; 158 } 159 case hwmon_temp: 160 switch (attr) { 161 case hwmon_temp_min: 162 case hwmon_temp_max: 163 return 0644; 164 case hwmon_temp_input: 165 case hwmon_temp_alarm: 166 return 0444; 167 default: 168 return 0; 169 } 170 default: 171 return 0; 172 } 173 } 174 175 static int bcm54140_hwmon_read_alarm(struct device *dev, unsigned int bit, 176 long *val) 177 { 178 struct phy_device *phydev = dev_get_drvdata(dev); 179 struct bcm54140_priv *priv = phydev->priv; 180 int tmp, ret = 0; 181 182 mutex_lock(&priv->alarm_lock); 183 184 /* latch any alarm bits */ 185 tmp = bcm_phy_read_rdb(phydev, BCM54140_RDB_MON_ISR); 186 if (tmp < 0) { 187 ret = tmp; 188 goto out; 189 } 190 priv->alarm |= tmp; 191 192 *val = !!(priv->alarm & bit); 193 priv->alarm &= ~bit; 194 195 out: 196 mutex_unlock(&priv->alarm_lock); 197 return ret; 198 } 199 200 static int bcm54140_hwmon_read_temp(struct device *dev, u32 attr, long *val) 201 { 202 struct phy_device *phydev = dev_get_drvdata(dev); 203 u16 reg; 204 int tmp; 205 206 switch (attr) { 207 case hwmon_temp_input: 208 reg = BCM54140_RDB_MON_TEMP_VAL; 209 break; 210 case hwmon_temp_min: 211 reg = BCM54140_RDB_MON_TEMP_MIN; 212 break; 213 case hwmon_temp_max: 214 reg = BCM54140_RDB_MON_TEMP_MAX; 215 break; 216 case hwmon_temp_alarm: 217 return bcm54140_hwmon_read_alarm(dev, 218 BCM54140_RDB_MON_ISR_TEMP, 219 val); 220 default: 221 return -EOPNOTSUPP; 222 } 223 224 tmp = bcm_phy_read_rdb(phydev, reg); 225 if (tmp < 0) 226 return tmp; 227 228 *val = BCM54140_HWMON_TO_TEMP(tmp & BCM54140_RDB_MON_TEMP_DATA_MASK); 229 230 return 0; 231 } 232 233 static int bcm54140_hwmon_read_in(struct device *dev, u32 attr, 234 int channel, long *val) 235 { 236 struct phy_device *phydev = dev_get_drvdata(dev); 237 u16 bit, reg; 238 int tmp; 239 240 switch (attr) { 241 case hwmon_in_input: 242 reg = BCM54140_HWMON_IN_VAL_REG(channel); 243 break; 244 case hwmon_in_min: 245 reg = BCM54140_HWMON_IN_MIN_REG(channel); 246 break; 247 case hwmon_in_max: 248 reg = BCM54140_HWMON_IN_MAX_REG(channel); 249 break; 250 case hwmon_in_alarm: 251 bit = BCM54140_HWMON_IN_ALARM_BIT(channel); 252 return bcm54140_hwmon_read_alarm(dev, bit, val); 253 default: 254 return -EOPNOTSUPP; 255 } 256 257 tmp = bcm_phy_read_rdb(phydev, reg); 258 if (tmp < 0) 259 return tmp; 260 261 tmp &= BCM54140_HWMON_IN_MASK(channel); 262 *val = BCM54140_HWMON_TO_IN(channel, tmp); 263 264 return 0; 265 } 266 267 static int bcm54140_hwmon_read(struct device *dev, 268 enum hwmon_sensor_types type, u32 attr, 269 int channel, long *val) 270 { 271 switch (type) { 272 case hwmon_temp: 273 return bcm54140_hwmon_read_temp(dev, attr, val); 274 case hwmon_in: 275 return bcm54140_hwmon_read_in(dev, attr, channel, val); 276 default: 277 return -EOPNOTSUPP; 278 } 279 } 280 281 static const char *const bcm54140_hwmon_in_labels[] = { 282 "AVDDL", 283 "AVDDH", 284 }; 285 286 static int bcm54140_hwmon_read_string(struct device *dev, 287 enum hwmon_sensor_types type, u32 attr, 288 int channel, const char **str) 289 { 290 switch (type) { 291 case hwmon_in: 292 switch (attr) { 293 case hwmon_in_label: 294 *str = bcm54140_hwmon_in_labels[channel]; 295 return 0; 296 default: 297 return -EOPNOTSUPP; 298 } 299 default: 300 return -EOPNOTSUPP; 301 } 302 } 303 304 static int bcm54140_hwmon_write_temp(struct device *dev, u32 attr, 305 int channel, long val) 306 { 307 struct phy_device *phydev = dev_get_drvdata(dev); 308 u16 mask = BCM54140_RDB_MON_TEMP_DATA_MASK; 309 u16 reg; 310 311 val = clamp_val(val, BCM54140_HWMON_TO_TEMP(mask), 312 BCM54140_HWMON_TO_TEMP(0)); 313 314 switch (attr) { 315 case hwmon_temp_min: 316 reg = BCM54140_RDB_MON_TEMP_MIN; 317 break; 318 case hwmon_temp_max: 319 reg = BCM54140_RDB_MON_TEMP_MAX; 320 break; 321 default: 322 return -EOPNOTSUPP; 323 } 324 325 return bcm_phy_modify_rdb(phydev, reg, mask, 326 BCM54140_HWMON_FROM_TEMP(val)); 327 } 328 329 static int bcm54140_hwmon_write_in(struct device *dev, u32 attr, 330 int channel, long val) 331 { 332 struct phy_device *phydev = dev_get_drvdata(dev); 333 u16 mask = BCM54140_HWMON_IN_MASK(channel); 334 u16 reg; 335 336 val = clamp_val(val, 0, BCM54140_HWMON_TO_IN(channel, mask)); 337 338 switch (attr) { 339 case hwmon_in_min: 340 reg = BCM54140_HWMON_IN_MIN_REG(channel); 341 break; 342 case hwmon_in_max: 343 reg = BCM54140_HWMON_IN_MAX_REG(channel); 344 break; 345 default: 346 return -EOPNOTSUPP; 347 } 348 349 return bcm_phy_modify_rdb(phydev, reg, mask, 350 BCM54140_HWMON_FROM_IN(channel, val)); 351 } 352 353 static int bcm54140_hwmon_write(struct device *dev, 354 enum hwmon_sensor_types type, u32 attr, 355 int channel, long val) 356 { 357 switch (type) { 358 case hwmon_temp: 359 return bcm54140_hwmon_write_temp(dev, attr, channel, val); 360 case hwmon_in: 361 return bcm54140_hwmon_write_in(dev, attr, channel, val); 362 default: 363 return -EOPNOTSUPP; 364 } 365 } 366 367 static const struct hwmon_channel_info *bcm54140_hwmon_info[] = { 368 HWMON_CHANNEL_INFO(temp, 369 HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | 370 HWMON_T_ALARM), 371 HWMON_CHANNEL_INFO(in, 372 HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | 373 HWMON_I_ALARM | HWMON_I_LABEL, 374 HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | 375 HWMON_I_ALARM | HWMON_I_LABEL), 376 NULL 377 }; 378 379 static const struct hwmon_ops bcm54140_hwmon_ops = { 380 .is_visible = bcm54140_hwmon_is_visible, 381 .read = bcm54140_hwmon_read, 382 .read_string = bcm54140_hwmon_read_string, 383 .write = bcm54140_hwmon_write, 384 }; 385 386 static const struct hwmon_chip_info bcm54140_chip_info = { 387 .ops = &bcm54140_hwmon_ops, 388 .info = bcm54140_hwmon_info, 389 }; 390 391 static int bcm54140_enable_monitoring(struct phy_device *phydev) 392 { 393 u16 mask, set; 394 395 /* 3.3V voltage mode */ 396 set = BCM54140_RDB_MON_CTRL_V_MODE; 397 398 /* select round-robin */ 399 mask = BCM54140_RDB_MON_CTRL_SEL_MASK; 400 set |= FIELD_PREP(BCM54140_RDB_MON_CTRL_SEL_MASK, 401 BCM54140_RDB_MON_CTRL_SEL_RR); 402 403 /* remove power-down bit */ 404 mask |= BCM54140_RDB_MON_CTRL_PWR_DOWN; 405 406 return bcm_phy_modify_rdb(phydev, BCM54140_RDB_MON_CTRL, mask, set); 407 } 408 409 static int bcm54140_probe_once(struct phy_device *phydev) 410 { 411 struct device *hwmon; 412 int ret; 413 414 /* enable hardware monitoring */ 415 ret = bcm54140_enable_monitoring(phydev); 416 if (ret) 417 return ret; 418 419 hwmon = devm_hwmon_device_register_with_info(&phydev->mdio.dev, 420 "BCM54140", phydev, 421 &bcm54140_chip_info, 422 NULL); 423 return PTR_ERR_OR_ZERO(hwmon); 424 } 425 #endif 426 427 static int bcm54140_base_read_rdb(struct phy_device *phydev, u16 rdb) 428 { 429 int ret; 430 431 phy_lock_mdio_bus(phydev); 432 ret = __phy_package_write(phydev, MII_BCM54XX_RDB_ADDR, rdb); 433 if (ret < 0) 434 goto out; 435 436 ret = __phy_package_read(phydev, MII_BCM54XX_RDB_DATA); 437 438 out: 439 phy_unlock_mdio_bus(phydev); 440 return ret; 441 } 442 443 static int bcm54140_base_write_rdb(struct phy_device *phydev, 444 u16 rdb, u16 val) 445 { 446 int ret; 447 448 phy_lock_mdio_bus(phydev); 449 ret = __phy_package_write(phydev, MII_BCM54XX_RDB_ADDR, rdb); 450 if (ret < 0) 451 goto out; 452 453 ret = __phy_package_write(phydev, MII_BCM54XX_RDB_DATA, val); 454 455 out: 456 phy_unlock_mdio_bus(phydev); 457 return ret; 458 } 459 460 /* Under some circumstances a core PLL may not lock, this will then prevent 461 * a successful link establishment. Restart the PLL after the voltages are 462 * stable to workaround this issue. 463 */ 464 static int bcm54140_b0_workaround(struct phy_device *phydev) 465 { 466 int spare3; 467 int ret; 468 469 spare3 = bcm_phy_read_rdb(phydev, BCM54140_RDB_SPARE3); 470 if (spare3 < 0) 471 return spare3; 472 473 spare3 &= ~BCM54140_RDB_SPARE3_BIT0; 474 475 ret = bcm_phy_write_rdb(phydev, BCM54140_RDB_SPARE3, spare3); 476 if (ret) 477 return ret; 478 479 ret = phy_modify(phydev, MII_BMCR, 0, BMCR_PDOWN); 480 if (ret) 481 return ret; 482 483 ret = phy_modify(phydev, MII_BMCR, BMCR_PDOWN, 0); 484 if (ret) 485 return ret; 486 487 spare3 |= BCM54140_RDB_SPARE3_BIT0; 488 489 return bcm_phy_write_rdb(phydev, BCM54140_RDB_SPARE3, spare3); 490 } 491 492 /* The BCM54140 is a quad PHY where only the first port has access to the 493 * global register. Thus we need to find out its PHY address. 494 * 495 */ 496 static int bcm54140_get_base_addr_and_port(struct phy_device *phydev) 497 { 498 struct bcm54140_priv *priv = phydev->priv; 499 struct mii_bus *bus = phydev->mdio.bus; 500 int addr, min_addr, max_addr; 501 int step = 1; 502 u32 phy_id; 503 int tmp; 504 505 min_addr = phydev->mdio.addr; 506 max_addr = phydev->mdio.addr; 507 addr = phydev->mdio.addr; 508 509 /* We scan forward and backwards and look for PHYs which have the 510 * same phy_id like we do. Step 1 will scan forward, step 2 511 * backwards. Once we are finished, we have a min_addr and 512 * max_addr which resembles the range of PHY addresses of the same 513 * type of PHY. There is one caveat; there may be many PHYs of 514 * the same type, but we know that each PHY takes exactly 4 515 * consecutive addresses. Therefore we can deduce our offset 516 * to the base address of this quad PHY. 517 */ 518 519 while (1) { 520 if (step == 3) { 521 break; 522 } else if (step == 1) { 523 max_addr = addr; 524 addr++; 525 } else { 526 min_addr = addr; 527 addr--; 528 } 529 530 if (addr < 0 || addr >= PHY_MAX_ADDR) { 531 addr = phydev->mdio.addr; 532 step++; 533 continue; 534 } 535 536 /* read the PHY id */ 537 tmp = mdiobus_read(bus, addr, MII_PHYSID1); 538 if (tmp < 0) 539 return tmp; 540 phy_id = tmp << 16; 541 tmp = mdiobus_read(bus, addr, MII_PHYSID2); 542 if (tmp < 0) 543 return tmp; 544 phy_id |= tmp; 545 546 /* see if it is still the same PHY */ 547 if ((phy_id & phydev->drv->phy_id_mask) != 548 (phydev->drv->phy_id & phydev->drv->phy_id_mask)) { 549 addr = phydev->mdio.addr; 550 step++; 551 } 552 } 553 554 /* The range we get should be a multiple of four. Please note that both 555 * the min_addr and max_addr are inclusive. So we have to add one if we 556 * subtract them. 557 */ 558 if ((max_addr - min_addr + 1) % 4) { 559 dev_err(&phydev->mdio.dev, 560 "Detected Quad PHY IDs %d..%d doesn't make sense.\n", 561 min_addr, max_addr); 562 return -EINVAL; 563 } 564 565 priv->port = (phydev->mdio.addr - min_addr) % 4; 566 priv->base_addr = phydev->mdio.addr - priv->port; 567 568 return 0; 569 } 570 571 static int bcm54140_probe(struct phy_device *phydev) 572 { 573 struct bcm54140_priv *priv; 574 int ret; 575 576 priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL); 577 if (!priv) 578 return -ENOMEM; 579 580 phydev->priv = priv; 581 582 ret = bcm54140_get_base_addr_and_port(phydev); 583 if (ret) 584 return ret; 585 586 devm_phy_package_join(&phydev->mdio.dev, phydev, priv->base_addr, 0); 587 588 #if IS_ENABLED(CONFIG_HWMON) 589 mutex_init(&priv->alarm_lock); 590 591 if (phy_package_init_once(phydev)) { 592 ret = bcm54140_probe_once(phydev); 593 if (ret) 594 return ret; 595 } 596 #endif 597 598 phydev_dbg(phydev, "probed (port %d, base PHY address %d)\n", 599 priv->port, priv->base_addr); 600 601 return 0; 602 } 603 604 static int bcm54140_config_init(struct phy_device *phydev) 605 { 606 u16 reg = 0xffff; 607 int ret; 608 609 /* Apply hardware errata */ 610 if (BCM54140_PHY_ID_REV(phydev->phy_id) == BCM54140_REV_B0) { 611 ret = bcm54140_b0_workaround(phydev); 612 if (ret) 613 return ret; 614 } 615 616 /* Unmask events we are interested in. */ 617 reg &= ~(BCM54140_RDB_INT_DUPLEX | 618 BCM54140_RDB_INT_SPEED | 619 BCM54140_RDB_INT_LINK); 620 ret = bcm_phy_write_rdb(phydev, BCM54140_RDB_IMR, reg); 621 if (ret) 622 return ret; 623 624 /* LED1=LINKSPD[1], LED2=LINKSPD[2], LED3=LINK/ACTIVITY */ 625 ret = bcm_phy_modify_rdb(phydev, BCM54140_RDB_SPARE1, 626 0, BCM54140_RDB_SPARE1_LSLM); 627 if (ret) 628 return ret; 629 630 ret = bcm_phy_modify_rdb(phydev, BCM54140_RDB_LED_CTRL, 631 0, BCM54140_RDB_LED_CTRL_ACTLINK0); 632 if (ret) 633 return ret; 634 635 /* disable super isolate mode */ 636 return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_PWR, 637 BCM54140_RDB_C_PWR_ISOLATE, 0); 638 } 639 640 static int bcm54140_did_interrupt(struct phy_device *phydev) 641 { 642 int ret; 643 644 ret = bcm_phy_read_rdb(phydev, BCM54140_RDB_ISR); 645 646 return (ret < 0) ? 0 : ret; 647 } 648 649 static int bcm54140_ack_intr(struct phy_device *phydev) 650 { 651 int reg; 652 653 /* clear pending interrupts */ 654 reg = bcm_phy_read_rdb(phydev, BCM54140_RDB_ISR); 655 if (reg < 0) 656 return reg; 657 658 return 0; 659 } 660 661 static int bcm54140_config_intr(struct phy_device *phydev) 662 { 663 struct bcm54140_priv *priv = phydev->priv; 664 static const u16 port_to_imr_bit[] = { 665 BCM54140_RDB_TOP_IMR_PORT0, BCM54140_RDB_TOP_IMR_PORT1, 666 BCM54140_RDB_TOP_IMR_PORT2, BCM54140_RDB_TOP_IMR_PORT3, 667 }; 668 int reg; 669 670 if (priv->port >= ARRAY_SIZE(port_to_imr_bit)) 671 return -EINVAL; 672 673 reg = bcm54140_base_read_rdb(phydev, BCM54140_RDB_TOP_IMR); 674 if (reg < 0) 675 return reg; 676 677 if (phydev->interrupts == PHY_INTERRUPT_ENABLED) 678 reg &= ~port_to_imr_bit[priv->port]; 679 else 680 reg |= port_to_imr_bit[priv->port]; 681 682 return bcm54140_base_write_rdb(phydev, BCM54140_RDB_TOP_IMR, reg); 683 } 684 685 static int bcm54140_get_downshift(struct phy_device *phydev, u8 *data) 686 { 687 int val; 688 689 val = bcm_phy_read_rdb(phydev, BCM54140_RDB_C_MISC_CTRL); 690 if (val < 0) 691 return val; 692 693 if (!(val & BCM54140_RDB_C_MISC_CTRL_WS_EN)) { 694 *data = DOWNSHIFT_DEV_DISABLE; 695 return 0; 696 } 697 698 val = bcm_phy_read_rdb(phydev, BCM54140_RDB_SPARE2); 699 if (val < 0) 700 return val; 701 702 if (val & BCM54140_RDB_SPARE2_WS_RTRY_DIS) 703 *data = 1; 704 else 705 *data = FIELD_GET(BCM54140_RDB_SPARE2_WS_RTRY_LIMIT, val) + 2; 706 707 return 0; 708 } 709 710 static int bcm54140_set_downshift(struct phy_device *phydev, u8 cnt) 711 { 712 u16 mask, set; 713 int ret; 714 715 if (cnt > BCM54140_MAX_DOWNSHIFT && cnt != DOWNSHIFT_DEV_DEFAULT_COUNT) 716 return -EINVAL; 717 718 if (!cnt) 719 return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_MISC_CTRL, 720 BCM54140_RDB_C_MISC_CTRL_WS_EN, 0); 721 722 if (cnt == DOWNSHIFT_DEV_DEFAULT_COUNT) 723 cnt = BCM54140_DEFAULT_DOWNSHIFT; 724 725 if (cnt == 1) { 726 mask = 0; 727 set = BCM54140_RDB_SPARE2_WS_RTRY_DIS; 728 } else { 729 mask = BCM54140_RDB_SPARE2_WS_RTRY_DIS; 730 mask |= BCM54140_RDB_SPARE2_WS_RTRY_LIMIT; 731 set = FIELD_PREP(BCM54140_RDB_SPARE2_WS_RTRY_LIMIT, cnt - 2); 732 } 733 ret = bcm_phy_modify_rdb(phydev, BCM54140_RDB_SPARE2, 734 mask, set); 735 if (ret) 736 return ret; 737 738 return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_MISC_CTRL, 739 0, BCM54140_RDB_C_MISC_CTRL_WS_EN); 740 } 741 742 static int bcm54140_get_edpd(struct phy_device *phydev, u16 *tx_interval) 743 { 744 int val; 745 746 val = bcm_phy_read_rdb(phydev, BCM54140_RDB_C_APWR); 747 if (val < 0) 748 return val; 749 750 switch (FIELD_GET(BCM54140_RDB_C_APWR_APD_MODE_MASK, val)) { 751 case BCM54140_RDB_C_APWR_APD_MODE_DIS: 752 case BCM54140_RDB_C_APWR_APD_MODE_DIS2: 753 *tx_interval = ETHTOOL_PHY_EDPD_DISABLE; 754 break; 755 case BCM54140_RDB_C_APWR_APD_MODE_EN: 756 case BCM54140_RDB_C_APWR_APD_MODE_EN_ANEG: 757 switch (FIELD_GET(BCM54140_RDB_C_APWR_SLP_TIM_MASK, val)) { 758 case BCM54140_RDB_C_APWR_SLP_TIM_2_7: 759 *tx_interval = 2700; 760 break; 761 case BCM54140_RDB_C_APWR_SLP_TIM_5_4: 762 *tx_interval = 5400; 763 break; 764 } 765 } 766 767 return 0; 768 } 769 770 static int bcm54140_set_edpd(struct phy_device *phydev, u16 tx_interval) 771 { 772 u16 mask, set; 773 774 mask = BCM54140_RDB_C_APWR_APD_MODE_MASK; 775 if (tx_interval == ETHTOOL_PHY_EDPD_DISABLE) 776 set = FIELD_PREP(BCM54140_RDB_C_APWR_APD_MODE_MASK, 777 BCM54140_RDB_C_APWR_APD_MODE_DIS); 778 else 779 set = FIELD_PREP(BCM54140_RDB_C_APWR_APD_MODE_MASK, 780 BCM54140_RDB_C_APWR_APD_MODE_EN_ANEG); 781 782 /* enable single pulse mode */ 783 set |= BCM54140_RDB_C_APWR_SINGLE_PULSE; 784 785 /* set sleep timer */ 786 mask |= BCM54140_RDB_C_APWR_SLP_TIM_MASK; 787 switch (tx_interval) { 788 case ETHTOOL_PHY_EDPD_DFLT_TX_MSECS: 789 case ETHTOOL_PHY_EDPD_DISABLE: 790 case 2700: 791 set |= BCM54140_RDB_C_APWR_SLP_TIM_2_7; 792 break; 793 case 5400: 794 set |= BCM54140_RDB_C_APWR_SLP_TIM_5_4; 795 break; 796 default: 797 return -EINVAL; 798 } 799 800 return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_APWR, mask, set); 801 } 802 803 static int bcm54140_get_tunable(struct phy_device *phydev, 804 struct ethtool_tunable *tuna, void *data) 805 { 806 switch (tuna->id) { 807 case ETHTOOL_PHY_DOWNSHIFT: 808 return bcm54140_get_downshift(phydev, data); 809 case ETHTOOL_PHY_EDPD: 810 return bcm54140_get_edpd(phydev, data); 811 default: 812 return -EOPNOTSUPP; 813 } 814 } 815 816 static int bcm54140_set_tunable(struct phy_device *phydev, 817 struct ethtool_tunable *tuna, const void *data) 818 { 819 switch (tuna->id) { 820 case ETHTOOL_PHY_DOWNSHIFT: 821 return bcm54140_set_downshift(phydev, *(const u8 *)data); 822 case ETHTOOL_PHY_EDPD: 823 return bcm54140_set_edpd(phydev, *(const u16 *)data); 824 default: 825 return -EOPNOTSUPP; 826 } 827 } 828 829 static struct phy_driver bcm54140_drivers[] = { 830 { 831 .phy_id = PHY_ID_BCM54140, 832 .phy_id_mask = BCM54140_PHY_ID_MASK, 833 .name = "Broadcom BCM54140", 834 .flags = PHY_POLL_CABLE_TEST, 835 .features = PHY_GBIT_FEATURES, 836 .config_init = bcm54140_config_init, 837 .did_interrupt = bcm54140_did_interrupt, 838 .ack_interrupt = bcm54140_ack_intr, 839 .config_intr = bcm54140_config_intr, 840 .probe = bcm54140_probe, 841 .suspend = genphy_suspend, 842 .resume = genphy_resume, 843 .soft_reset = genphy_soft_reset, 844 .get_tunable = bcm54140_get_tunable, 845 .set_tunable = bcm54140_set_tunable, 846 .cable_test_start = bcm_phy_cable_test_start_rdb, 847 .cable_test_get_status = bcm_phy_cable_test_get_status_rdb, 848 }, 849 }; 850 module_phy_driver(bcm54140_drivers); 851 852 static struct mdio_device_id __maybe_unused bcm54140_tbl[] = { 853 { PHY_ID_BCM54140, BCM54140_PHY_ID_MASK }, 854 { } 855 }; 856 857 MODULE_AUTHOR("Michael Walle"); 858 MODULE_DESCRIPTION("Broadcom BCM54140 PHY driver"); 859 MODULE_DEVICE_TABLE(mdio, bcm54140_tbl); 860 MODULE_LICENSE("GPL"); 861