1 // SPDX-License-Identifier: GPL-2.0+ 2 /** 3 * Driver for Analog Devices Industrial Ethernet PHYs 4 * 5 * Copyright 2019 Analog Devices Inc. 6 */ 7 #include <linux/kernel.h> 8 #include <linux/bitfield.h> 9 #include <linux/delay.h> 10 #include <linux/errno.h> 11 #include <linux/init.h> 12 #include <linux/module.h> 13 #include <linux/mii.h> 14 #include <linux/phy.h> 15 #include <linux/property.h> 16 17 #define PHY_ID_ADIN1200 0x0283bc20 18 #define PHY_ID_ADIN1300 0x0283bc30 19 20 #define ADIN1300_MII_EXT_REG_PTR 0x0010 21 #define ADIN1300_MII_EXT_REG_DATA 0x0011 22 23 #define ADIN1300_PHY_CTRL1 0x0012 24 #define ADIN1300_AUTO_MDI_EN BIT(10) 25 #define ADIN1300_MAN_MDIX_EN BIT(9) 26 27 #define ADIN1300_RX_ERR_CNT 0x0014 28 29 #define ADIN1300_PHY_CTRL_STATUS2 0x0015 30 #define ADIN1300_NRG_PD_EN BIT(3) 31 #define ADIN1300_NRG_PD_TX_EN BIT(2) 32 #define ADIN1300_NRG_PD_STATUS BIT(1) 33 34 #define ADIN1300_PHY_CTRL2 0x0016 35 #define ADIN1300_DOWNSPEED_AN_100_EN BIT(11) 36 #define ADIN1300_DOWNSPEED_AN_10_EN BIT(10) 37 #define ADIN1300_GROUP_MDIO_EN BIT(6) 38 #define ADIN1300_DOWNSPEEDS_EN \ 39 (ADIN1300_DOWNSPEED_AN_100_EN | ADIN1300_DOWNSPEED_AN_10_EN) 40 41 #define ADIN1300_PHY_CTRL3 0x0017 42 #define ADIN1300_LINKING_EN BIT(13) 43 #define ADIN1300_DOWNSPEED_RETRIES_MSK GENMASK(12, 10) 44 45 #define ADIN1300_INT_MASK_REG 0x0018 46 #define ADIN1300_INT_MDIO_SYNC_EN BIT(9) 47 #define ADIN1300_INT_ANEG_STAT_CHNG_EN BIT(8) 48 #define ADIN1300_INT_ANEG_PAGE_RX_EN BIT(6) 49 #define ADIN1300_INT_IDLE_ERR_CNT_EN BIT(5) 50 #define ADIN1300_INT_MAC_FIFO_OU_EN BIT(4) 51 #define ADIN1300_INT_RX_STAT_CHNG_EN BIT(3) 52 #define ADIN1300_INT_LINK_STAT_CHNG_EN BIT(2) 53 #define ADIN1300_INT_SPEED_CHNG_EN BIT(1) 54 #define ADIN1300_INT_HW_IRQ_EN BIT(0) 55 #define ADIN1300_INT_MASK_EN \ 56 (ADIN1300_INT_LINK_STAT_CHNG_EN | ADIN1300_INT_HW_IRQ_EN) 57 #define ADIN1300_INT_STATUS_REG 0x0019 58 59 #define ADIN1300_PHY_STATUS1 0x001a 60 #define ADIN1300_PAIR_01_SWAP BIT(11) 61 62 /* EEE register addresses, accessible via Clause 22 access using 63 * ADIN1300_MII_EXT_REG_PTR & ADIN1300_MII_EXT_REG_DATA. 64 * The bit-fields are the same as specified by IEEE for EEE. 65 */ 66 #define ADIN1300_EEE_CAP_REG 0x8000 67 #define ADIN1300_EEE_ADV_REG 0x8001 68 #define ADIN1300_EEE_LPABLE_REG 0x8002 69 #define ADIN1300_CLOCK_STOP_REG 0x9400 70 #define ADIN1300_LPI_WAKE_ERR_CNT_REG 0xa000 71 72 #define ADIN1300_GE_SOFT_RESET_REG 0xff0c 73 #define ADIN1300_GE_SOFT_RESET BIT(0) 74 75 #define ADIN1300_GE_RGMII_CFG_REG 0xff23 76 #define ADIN1300_GE_RGMII_RX_MSK GENMASK(8, 6) 77 #define ADIN1300_GE_RGMII_RX_SEL(x) \ 78 FIELD_PREP(ADIN1300_GE_RGMII_RX_MSK, x) 79 #define ADIN1300_GE_RGMII_GTX_MSK GENMASK(5, 3) 80 #define ADIN1300_GE_RGMII_GTX_SEL(x) \ 81 FIELD_PREP(ADIN1300_GE_RGMII_GTX_MSK, x) 82 #define ADIN1300_GE_RGMII_RXID_EN BIT(2) 83 #define ADIN1300_GE_RGMII_TXID_EN BIT(1) 84 #define ADIN1300_GE_RGMII_EN BIT(0) 85 86 /* RGMII internal delay settings for rx and tx for ADIN1300 */ 87 #define ADIN1300_RGMII_1_60_NS 0x0001 88 #define ADIN1300_RGMII_1_80_NS 0x0002 89 #define ADIN1300_RGMII_2_00_NS 0x0000 90 #define ADIN1300_RGMII_2_20_NS 0x0006 91 #define ADIN1300_RGMII_2_40_NS 0x0007 92 93 #define ADIN1300_GE_RMII_CFG_REG 0xff24 94 #define ADIN1300_GE_RMII_FIFO_DEPTH_MSK GENMASK(6, 4) 95 #define ADIN1300_GE_RMII_FIFO_DEPTH_SEL(x) \ 96 FIELD_PREP(ADIN1300_GE_RMII_FIFO_DEPTH_MSK, x) 97 #define ADIN1300_GE_RMII_EN BIT(0) 98 99 /* RMII fifo depth values */ 100 #define ADIN1300_RMII_4_BITS 0x0000 101 #define ADIN1300_RMII_8_BITS 0x0001 102 #define ADIN1300_RMII_12_BITS 0x0002 103 #define ADIN1300_RMII_16_BITS 0x0003 104 #define ADIN1300_RMII_20_BITS 0x0004 105 #define ADIN1300_RMII_24_BITS 0x0005 106 107 /** 108 * struct adin_cfg_reg_map - map a config value to aregister value 109 * @cfg value in device configuration 110 * @reg value in the register 111 */ 112 struct adin_cfg_reg_map { 113 int cfg; 114 int reg; 115 }; 116 117 static const struct adin_cfg_reg_map adin_rgmii_delays[] = { 118 { 1600, ADIN1300_RGMII_1_60_NS }, 119 { 1800, ADIN1300_RGMII_1_80_NS }, 120 { 2000, ADIN1300_RGMII_2_00_NS }, 121 { 2200, ADIN1300_RGMII_2_20_NS }, 122 { 2400, ADIN1300_RGMII_2_40_NS }, 123 { }, 124 }; 125 126 static const struct adin_cfg_reg_map adin_rmii_fifo_depths[] = { 127 { 4, ADIN1300_RMII_4_BITS }, 128 { 8, ADIN1300_RMII_8_BITS }, 129 { 12, ADIN1300_RMII_12_BITS }, 130 { 16, ADIN1300_RMII_16_BITS }, 131 { 20, ADIN1300_RMII_20_BITS }, 132 { 24, ADIN1300_RMII_24_BITS }, 133 { }, 134 }; 135 136 /** 137 * struct adin_clause45_mmd_map - map to convert Clause 45 regs to Clause 22 138 * @devad device address used in Clause 45 access 139 * @cl45_regnum register address defined by Clause 45 140 * @adin_regnum equivalent register address accessible via Clause 22 141 */ 142 struct adin_clause45_mmd_map { 143 int devad; 144 u16 cl45_regnum; 145 u16 adin_regnum; 146 }; 147 148 static struct adin_clause45_mmd_map adin_clause45_mmd_map[] = { 149 { MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE, ADIN1300_EEE_CAP_REG }, 150 { MDIO_MMD_AN, MDIO_AN_EEE_LPABLE, ADIN1300_EEE_LPABLE_REG }, 151 { MDIO_MMD_AN, MDIO_AN_EEE_ADV, ADIN1300_EEE_ADV_REG }, 152 { MDIO_MMD_PCS, MDIO_CTRL1, ADIN1300_CLOCK_STOP_REG }, 153 { MDIO_MMD_PCS, MDIO_PCS_EEE_WK_ERR, ADIN1300_LPI_WAKE_ERR_CNT_REG }, 154 }; 155 156 struct adin_hw_stat { 157 const char *string; 158 u16 reg1; 159 u16 reg2; 160 }; 161 162 static struct adin_hw_stat adin_hw_stats[] = { 163 { "total_frames_checked_count", 0x940A, 0x940B }, /* hi + lo */ 164 { "length_error_frames_count", 0x940C }, 165 { "alignment_error_frames_count", 0x940D }, 166 { "symbol_error_count", 0x940E }, 167 { "oversized_frames_count", 0x940F }, 168 { "undersized_frames_count", 0x9410 }, 169 { "odd_nibble_frames_count", 0x9411 }, 170 { "odd_preamble_packet_count", 0x9412 }, 171 { "dribble_bits_frames_count", 0x9413 }, 172 { "false_carrier_events_count", 0x9414 }, 173 }; 174 175 /** 176 * struct adin_priv - ADIN PHY driver private data 177 * stats statistic counters for the PHY 178 */ 179 struct adin_priv { 180 u64 stats[ARRAY_SIZE(adin_hw_stats)]; 181 }; 182 183 static int adin_lookup_reg_value(const struct adin_cfg_reg_map *tbl, int cfg) 184 { 185 size_t i; 186 187 for (i = 0; tbl[i].cfg; i++) { 188 if (tbl[i].cfg == cfg) 189 return tbl[i].reg; 190 } 191 192 return -EINVAL; 193 } 194 195 static u32 adin_get_reg_value(struct phy_device *phydev, 196 const char *prop_name, 197 const struct adin_cfg_reg_map *tbl, 198 u32 dflt) 199 { 200 struct device *dev = &phydev->mdio.dev; 201 u32 val; 202 int rc; 203 204 if (device_property_read_u32(dev, prop_name, &val)) 205 return dflt; 206 207 rc = adin_lookup_reg_value(tbl, val); 208 if (rc < 0) { 209 phydev_warn(phydev, 210 "Unsupported value %u for %s using default (%u)\n", 211 val, prop_name, dflt); 212 return dflt; 213 } 214 215 return rc; 216 } 217 218 static int adin_config_rgmii_mode(struct phy_device *phydev) 219 { 220 u32 val; 221 int reg; 222 223 if (!phy_interface_is_rgmii(phydev)) 224 return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, 225 ADIN1300_GE_RGMII_CFG_REG, 226 ADIN1300_GE_RGMII_EN); 227 228 reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_GE_RGMII_CFG_REG); 229 if (reg < 0) 230 return reg; 231 232 reg |= ADIN1300_GE_RGMII_EN; 233 234 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || 235 phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) { 236 reg |= ADIN1300_GE_RGMII_RXID_EN; 237 238 val = adin_get_reg_value(phydev, "adi,rx-internal-delay-ps", 239 adin_rgmii_delays, 240 ADIN1300_RGMII_2_00_NS); 241 reg &= ~ADIN1300_GE_RGMII_RX_MSK; 242 reg |= ADIN1300_GE_RGMII_RX_SEL(val); 243 } else { 244 reg &= ~ADIN1300_GE_RGMII_RXID_EN; 245 } 246 247 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || 248 phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) { 249 reg |= ADIN1300_GE_RGMII_TXID_EN; 250 251 val = adin_get_reg_value(phydev, "adi,tx-internal-delay-ps", 252 adin_rgmii_delays, 253 ADIN1300_RGMII_2_00_NS); 254 reg &= ~ADIN1300_GE_RGMII_GTX_MSK; 255 reg |= ADIN1300_GE_RGMII_GTX_SEL(val); 256 } else { 257 reg &= ~ADIN1300_GE_RGMII_TXID_EN; 258 } 259 260 return phy_write_mmd(phydev, MDIO_MMD_VEND1, 261 ADIN1300_GE_RGMII_CFG_REG, reg); 262 } 263 264 static int adin_config_rmii_mode(struct phy_device *phydev) 265 { 266 u32 val; 267 int reg; 268 269 if (phydev->interface != PHY_INTERFACE_MODE_RMII) 270 return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, 271 ADIN1300_GE_RMII_CFG_REG, 272 ADIN1300_GE_RMII_EN); 273 274 reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_GE_RMII_CFG_REG); 275 if (reg < 0) 276 return reg; 277 278 reg |= ADIN1300_GE_RMII_EN; 279 280 val = adin_get_reg_value(phydev, "adi,fifo-depth-bits", 281 adin_rmii_fifo_depths, 282 ADIN1300_RMII_8_BITS); 283 284 reg &= ~ADIN1300_GE_RMII_FIFO_DEPTH_MSK; 285 reg |= ADIN1300_GE_RMII_FIFO_DEPTH_SEL(val); 286 287 return phy_write_mmd(phydev, MDIO_MMD_VEND1, 288 ADIN1300_GE_RMII_CFG_REG, reg); 289 } 290 291 static int adin_get_downshift(struct phy_device *phydev, u8 *data) 292 { 293 int val, cnt, enable; 294 295 val = phy_read(phydev, ADIN1300_PHY_CTRL2); 296 if (val < 0) 297 return val; 298 299 cnt = phy_read(phydev, ADIN1300_PHY_CTRL3); 300 if (cnt < 0) 301 return cnt; 302 303 enable = FIELD_GET(ADIN1300_DOWNSPEEDS_EN, val); 304 cnt = FIELD_GET(ADIN1300_DOWNSPEED_RETRIES_MSK, cnt); 305 306 *data = (enable && cnt) ? cnt : DOWNSHIFT_DEV_DISABLE; 307 308 return 0; 309 } 310 311 static int adin_set_downshift(struct phy_device *phydev, u8 cnt) 312 { 313 u16 val; 314 int rc; 315 316 if (cnt == DOWNSHIFT_DEV_DISABLE) 317 return phy_clear_bits(phydev, ADIN1300_PHY_CTRL2, 318 ADIN1300_DOWNSPEEDS_EN); 319 320 if (cnt > 7) 321 return -E2BIG; 322 323 val = FIELD_PREP(ADIN1300_DOWNSPEED_RETRIES_MSK, cnt); 324 val |= ADIN1300_LINKING_EN; 325 326 rc = phy_modify(phydev, ADIN1300_PHY_CTRL3, 327 ADIN1300_LINKING_EN | ADIN1300_DOWNSPEED_RETRIES_MSK, 328 val); 329 if (rc < 0) 330 return rc; 331 332 return phy_set_bits(phydev, ADIN1300_PHY_CTRL2, 333 ADIN1300_DOWNSPEEDS_EN); 334 } 335 336 static int adin_get_edpd(struct phy_device *phydev, u16 *tx_interval) 337 { 338 int val; 339 340 val = phy_read(phydev, ADIN1300_PHY_CTRL_STATUS2); 341 if (val < 0) 342 return val; 343 344 if (ADIN1300_NRG_PD_EN & val) { 345 if (val & ADIN1300_NRG_PD_TX_EN) 346 /* default is 1 second */ 347 *tx_interval = ETHTOOL_PHY_EDPD_DFLT_TX_MSECS; 348 else 349 *tx_interval = ETHTOOL_PHY_EDPD_NO_TX; 350 } else { 351 *tx_interval = ETHTOOL_PHY_EDPD_DISABLE; 352 } 353 354 return 0; 355 } 356 357 static int adin_set_edpd(struct phy_device *phydev, u16 tx_interval) 358 { 359 u16 val; 360 361 if (tx_interval == ETHTOOL_PHY_EDPD_DISABLE) 362 return phy_clear_bits(phydev, ADIN1300_PHY_CTRL_STATUS2, 363 (ADIN1300_NRG_PD_EN | ADIN1300_NRG_PD_TX_EN)); 364 365 val = ADIN1300_NRG_PD_EN; 366 367 switch (tx_interval) { 368 case 1000: /* 1 second */ 369 /* fallthrough */ 370 case ETHTOOL_PHY_EDPD_DFLT_TX_MSECS: 371 val |= ADIN1300_NRG_PD_TX_EN; 372 /* fallthrough */ 373 case ETHTOOL_PHY_EDPD_NO_TX: 374 break; 375 default: 376 return -EINVAL; 377 } 378 379 return phy_modify(phydev, ADIN1300_PHY_CTRL_STATUS2, 380 (ADIN1300_NRG_PD_EN | ADIN1300_NRG_PD_TX_EN), 381 val); 382 } 383 384 static int adin_get_tunable(struct phy_device *phydev, 385 struct ethtool_tunable *tuna, void *data) 386 { 387 switch (tuna->id) { 388 case ETHTOOL_PHY_DOWNSHIFT: 389 return adin_get_downshift(phydev, data); 390 case ETHTOOL_PHY_EDPD: 391 return adin_get_edpd(phydev, data); 392 default: 393 return -EOPNOTSUPP; 394 } 395 } 396 397 static int adin_set_tunable(struct phy_device *phydev, 398 struct ethtool_tunable *tuna, const void *data) 399 { 400 switch (tuna->id) { 401 case ETHTOOL_PHY_DOWNSHIFT: 402 return adin_set_downshift(phydev, *(const u8 *)data); 403 case ETHTOOL_PHY_EDPD: 404 return adin_set_edpd(phydev, *(const u16 *)data); 405 default: 406 return -EOPNOTSUPP; 407 } 408 } 409 410 static int adin_config_init(struct phy_device *phydev) 411 { 412 int rc; 413 414 phydev->mdix_ctrl = ETH_TP_MDI_AUTO; 415 416 rc = adin_config_rgmii_mode(phydev); 417 if (rc < 0) 418 return rc; 419 420 rc = adin_config_rmii_mode(phydev); 421 if (rc < 0) 422 return rc; 423 424 rc = adin_set_downshift(phydev, 4); 425 if (rc < 0) 426 return rc; 427 428 rc = adin_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS); 429 if (rc < 0) 430 return rc; 431 432 phydev_dbg(phydev, "PHY is using mode '%s'\n", 433 phy_modes(phydev->interface)); 434 435 return 0; 436 } 437 438 static int adin_phy_ack_intr(struct phy_device *phydev) 439 { 440 /* Clear pending interrupts */ 441 int rc = phy_read(phydev, ADIN1300_INT_STATUS_REG); 442 443 return rc < 0 ? rc : 0; 444 } 445 446 static int adin_phy_config_intr(struct phy_device *phydev) 447 { 448 if (phydev->interrupts == PHY_INTERRUPT_ENABLED) 449 return phy_set_bits(phydev, ADIN1300_INT_MASK_REG, 450 ADIN1300_INT_MASK_EN); 451 452 return phy_clear_bits(phydev, ADIN1300_INT_MASK_REG, 453 ADIN1300_INT_MASK_EN); 454 } 455 456 static int adin_cl45_to_adin_reg(struct phy_device *phydev, int devad, 457 u16 cl45_regnum) 458 { 459 struct adin_clause45_mmd_map *m; 460 int i; 461 462 if (devad == MDIO_MMD_VEND1) 463 return cl45_regnum; 464 465 for (i = 0; i < ARRAY_SIZE(adin_clause45_mmd_map); i++) { 466 m = &adin_clause45_mmd_map[i]; 467 if (m->devad == devad && m->cl45_regnum == cl45_regnum) 468 return m->adin_regnum; 469 } 470 471 phydev_err(phydev, 472 "No translation available for devad: %d reg: %04x\n", 473 devad, cl45_regnum); 474 475 return -EINVAL; 476 } 477 478 static int adin_read_mmd(struct phy_device *phydev, int devad, u16 regnum) 479 { 480 struct mii_bus *bus = phydev->mdio.bus; 481 int phy_addr = phydev->mdio.addr; 482 int adin_regnum; 483 int err; 484 485 adin_regnum = adin_cl45_to_adin_reg(phydev, devad, regnum); 486 if (adin_regnum < 0) 487 return adin_regnum; 488 489 err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR, 490 adin_regnum); 491 if (err) 492 return err; 493 494 return __mdiobus_read(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA); 495 } 496 497 static int adin_write_mmd(struct phy_device *phydev, int devad, u16 regnum, 498 u16 val) 499 { 500 struct mii_bus *bus = phydev->mdio.bus; 501 int phy_addr = phydev->mdio.addr; 502 int adin_regnum; 503 int err; 504 505 adin_regnum = adin_cl45_to_adin_reg(phydev, devad, regnum); 506 if (adin_regnum < 0) 507 return adin_regnum; 508 509 err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR, 510 adin_regnum); 511 if (err) 512 return err; 513 514 return __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA, val); 515 } 516 517 static int adin_config_mdix(struct phy_device *phydev) 518 { 519 bool auto_en, mdix_en; 520 int reg; 521 522 mdix_en = false; 523 auto_en = false; 524 switch (phydev->mdix_ctrl) { 525 case ETH_TP_MDI: 526 break; 527 case ETH_TP_MDI_X: 528 mdix_en = true; 529 break; 530 case ETH_TP_MDI_AUTO: 531 auto_en = true; 532 break; 533 default: 534 return -EINVAL; 535 } 536 537 reg = phy_read(phydev, ADIN1300_PHY_CTRL1); 538 if (reg < 0) 539 return reg; 540 541 if (mdix_en) 542 reg |= ADIN1300_MAN_MDIX_EN; 543 else 544 reg &= ~ADIN1300_MAN_MDIX_EN; 545 546 if (auto_en) 547 reg |= ADIN1300_AUTO_MDI_EN; 548 else 549 reg &= ~ADIN1300_AUTO_MDI_EN; 550 551 return phy_write(phydev, ADIN1300_PHY_CTRL1, reg); 552 } 553 554 static int adin_config_aneg(struct phy_device *phydev) 555 { 556 int ret; 557 558 ret = adin_config_mdix(phydev); 559 if (ret) 560 return ret; 561 562 return genphy_config_aneg(phydev); 563 } 564 565 static int adin_mdix_update(struct phy_device *phydev) 566 { 567 bool auto_en, mdix_en; 568 bool swapped; 569 int reg; 570 571 reg = phy_read(phydev, ADIN1300_PHY_CTRL1); 572 if (reg < 0) 573 return reg; 574 575 auto_en = !!(reg & ADIN1300_AUTO_MDI_EN); 576 mdix_en = !!(reg & ADIN1300_MAN_MDIX_EN); 577 578 /* If MDI/MDIX is forced, just read it from the control reg */ 579 if (!auto_en) { 580 if (mdix_en) 581 phydev->mdix = ETH_TP_MDI_X; 582 else 583 phydev->mdix = ETH_TP_MDI; 584 return 0; 585 } 586 587 /** 588 * Otherwise, we need to deduce it from the PHY status2 reg. 589 * When Auto-MDI is enabled, the ADIN1300_MAN_MDIX_EN bit implies 590 * a preference for MDIX when it is set. 591 */ 592 reg = phy_read(phydev, ADIN1300_PHY_STATUS1); 593 if (reg < 0) 594 return reg; 595 596 swapped = !!(reg & ADIN1300_PAIR_01_SWAP); 597 598 if (mdix_en != swapped) 599 phydev->mdix = ETH_TP_MDI_X; 600 else 601 phydev->mdix = ETH_TP_MDI; 602 603 return 0; 604 } 605 606 static int adin_read_status(struct phy_device *phydev) 607 { 608 int ret; 609 610 ret = adin_mdix_update(phydev); 611 if (ret < 0) 612 return ret; 613 614 return genphy_read_status(phydev); 615 } 616 617 static int adin_soft_reset(struct phy_device *phydev) 618 { 619 int rc; 620 621 /* The reset bit is self-clearing, set it and wait */ 622 rc = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, 623 ADIN1300_GE_SOFT_RESET_REG, 624 ADIN1300_GE_SOFT_RESET); 625 if (rc < 0) 626 return rc; 627 628 msleep(10); 629 630 /* If we get a read error something may be wrong */ 631 rc = phy_read_mmd(phydev, MDIO_MMD_VEND1, 632 ADIN1300_GE_SOFT_RESET_REG); 633 634 return rc < 0 ? rc : 0; 635 } 636 637 static int adin_get_sset_count(struct phy_device *phydev) 638 { 639 return ARRAY_SIZE(adin_hw_stats); 640 } 641 642 static void adin_get_strings(struct phy_device *phydev, u8 *data) 643 { 644 int i; 645 646 for (i = 0; i < ARRAY_SIZE(adin_hw_stats); i++) { 647 strlcpy(&data[i * ETH_GSTRING_LEN], 648 adin_hw_stats[i].string, ETH_GSTRING_LEN); 649 } 650 } 651 652 static int adin_read_mmd_stat_regs(struct phy_device *phydev, 653 struct adin_hw_stat *stat, 654 u32 *val) 655 { 656 int ret; 657 658 ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, stat->reg1); 659 if (ret < 0) 660 return ret; 661 662 *val = (ret & 0xffff); 663 664 if (stat->reg2 == 0) 665 return 0; 666 667 ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, stat->reg2); 668 if (ret < 0) 669 return ret; 670 671 *val <<= 16; 672 *val |= (ret & 0xffff); 673 674 return 0; 675 } 676 677 static u64 adin_get_stat(struct phy_device *phydev, int i) 678 { 679 struct adin_hw_stat *stat = &adin_hw_stats[i]; 680 struct adin_priv *priv = phydev->priv; 681 u32 val; 682 int ret; 683 684 if (stat->reg1 > 0x1f) { 685 ret = adin_read_mmd_stat_regs(phydev, stat, &val); 686 if (ret < 0) 687 return (u64)(~0); 688 } else { 689 ret = phy_read(phydev, stat->reg1); 690 if (ret < 0) 691 return (u64)(~0); 692 val = (ret & 0xffff); 693 } 694 695 priv->stats[i] += val; 696 697 return priv->stats[i]; 698 } 699 700 static void adin_get_stats(struct phy_device *phydev, 701 struct ethtool_stats *stats, u64 *data) 702 { 703 int i, rc; 704 705 /* latch copies of all the frame-checker counters */ 706 rc = phy_read(phydev, ADIN1300_RX_ERR_CNT); 707 if (rc < 0) 708 return; 709 710 for (i = 0; i < ARRAY_SIZE(adin_hw_stats); i++) 711 data[i] = adin_get_stat(phydev, i); 712 } 713 714 static int adin_probe(struct phy_device *phydev) 715 { 716 struct device *dev = &phydev->mdio.dev; 717 struct adin_priv *priv; 718 719 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); 720 if (!priv) 721 return -ENOMEM; 722 723 phydev->priv = priv; 724 725 return 0; 726 } 727 728 static struct phy_driver adin_driver[] = { 729 { 730 PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200), 731 .name = "ADIN1200", 732 .probe = adin_probe, 733 .config_init = adin_config_init, 734 .soft_reset = adin_soft_reset, 735 .config_aneg = adin_config_aneg, 736 .read_status = adin_read_status, 737 .get_tunable = adin_get_tunable, 738 .set_tunable = adin_set_tunable, 739 .ack_interrupt = adin_phy_ack_intr, 740 .config_intr = adin_phy_config_intr, 741 .get_sset_count = adin_get_sset_count, 742 .get_strings = adin_get_strings, 743 .get_stats = adin_get_stats, 744 .resume = genphy_resume, 745 .suspend = genphy_suspend, 746 .read_mmd = adin_read_mmd, 747 .write_mmd = adin_write_mmd, 748 }, 749 { 750 PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300), 751 .name = "ADIN1300", 752 .probe = adin_probe, 753 .config_init = adin_config_init, 754 .soft_reset = adin_soft_reset, 755 .config_aneg = adin_config_aneg, 756 .read_status = adin_read_status, 757 .get_tunable = adin_get_tunable, 758 .set_tunable = adin_set_tunable, 759 .ack_interrupt = adin_phy_ack_intr, 760 .config_intr = adin_phy_config_intr, 761 .get_sset_count = adin_get_sset_count, 762 .get_strings = adin_get_strings, 763 .get_stats = adin_get_stats, 764 .resume = genphy_resume, 765 .suspend = genphy_suspend, 766 .read_mmd = adin_read_mmd, 767 .write_mmd = adin_write_mmd, 768 }, 769 }; 770 771 module_phy_driver(adin_driver); 772 773 static struct mdio_device_id __maybe_unused adin_tbl[] = { 774 { PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200) }, 775 { PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300) }, 776 { } 777 }; 778 779 MODULE_DEVICE_TABLE(mdio, adin_tbl); 780 MODULE_DESCRIPTION("Analog Devices Industrial Ethernet PHY driver"); 781 MODULE_LICENSE("GPL"); 782