1# 2# PHY Layer Configuration 3# 4 5menuconfig PHYLIB 6 tristate "PHY Device support and infrastructure" 7 depends on NETDEVICES 8 help 9 Ethernet controllers are usually attached to PHY 10 devices. This option provides infrastructure for 11 managing PHY devices. 12 13if PHYLIB 14 15comment "MII PHY device drivers" 16 17config AQUANTIA_PHY 18 tristate "Drivers for the Aquantia PHYs" 19 ---help--- 20 Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405 21 22config AT803X_PHY 23 tristate "Drivers for Atheros AT803X PHYs" 24 ---help--- 25 Currently supports the AT8030 and AT8035 model 26 27config AMD_PHY 28 tristate "Drivers for the AMD PHYs" 29 ---help--- 30 Currently supports the am79c874 31 32config MARVELL_PHY 33 tristate "Drivers for Marvell PHYs" 34 ---help--- 35 Currently has a driver for the 88E1011S 36 37config DAVICOM_PHY 38 tristate "Drivers for Davicom PHYs" 39 ---help--- 40 Currently supports dm9161e and dm9131 41 42config QSEMI_PHY 43 tristate "Drivers for Quality Semiconductor PHYs" 44 ---help--- 45 Currently supports the qs6612 46 47config LXT_PHY 48 tristate "Drivers for the Intel LXT PHYs" 49 ---help--- 50 Currently supports the lxt970, lxt971 51 52config CICADA_PHY 53 tristate "Drivers for the Cicada PHYs" 54 ---help--- 55 Currently supports the cis8204 56 57config VITESSE_PHY 58 tristate "Drivers for the Vitesse PHYs" 59 ---help--- 60 Currently supports the vsc8244 61 62config TERANETICS_PHY 63 tristate "Drivers for the Teranetics PHYs" 64 ---help--- 65 Currently supports the Teranetics TN2020 66 67config SMSC_PHY 68 tristate "Drivers for SMSC PHYs" 69 ---help--- 70 Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs 71 72config BROADCOM_PHY 73 tristate "Drivers for Broadcom PHYs" 74 ---help--- 75 Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464, 76 BCM5481 and BCM5482 PHYs. 77 78config BCM63XX_PHY 79 tristate "Drivers for Broadcom 63xx SOCs internal PHY" 80 depends on BCM63XX 81 ---help--- 82 Currently supports the 6348 and 6358 PHYs. 83 84config BCM7XXX_PHY 85 tristate "Drivers for Broadcom 7xxx SOCs internal PHYs" 86 ---help--- 87 Currently supports the BCM7366, BCM7439, BCM7445, and 88 40nm and 65nm generation of BCM7xxx Set Top Box SoCs. 89 90config BCM87XX_PHY 91 tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs" 92 help 93 Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs. 94 95config ICPLUS_PHY 96 tristate "Drivers for ICPlus PHYs" 97 ---help--- 98 Currently supports the IP175C and IP1001 PHYs. 99 100config REALTEK_PHY 101 tristate "Drivers for Realtek PHYs" 102 ---help--- 103 Supports the Realtek 821x PHY. 104 105config NATIONAL_PHY 106 tristate "Drivers for National Semiconductor PHYs" 107 ---help--- 108 Currently supports the DP83865 PHY. 109 110config STE10XP 111 tristate "Driver for STMicroelectronics STe10Xp PHYs" 112 ---help--- 113 This is the driver for the STe100p and STe101p PHYs. 114 115config LSI_ET1011C_PHY 116 tristate "Driver for LSI ET1011C PHY" 117 ---help--- 118 Supports the LSI ET1011C PHY. 119 120config MICREL_PHY 121 tristate "Driver for Micrel PHYs" 122 ---help--- 123 Supports the KSZ9021, VSC8201, KS8001 PHYs. 124 125config DP83867_PHY 126 tristate "Drivers for Texas Instruments DP83867 Gigabit PHY" 127 ---help--- 128 Currently supports the DP83867 PHY. 129 130config FIXED_PHY 131 tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" 132 depends on PHYLIB 133 ---help--- 134 Adds the platform "fixed" MDIO Bus to cover the boards that use 135 PHYs that are not connected to the real MDIO bus. 136 137 Currently tested with mpc866ads and mpc8349e-mitx. 138 139config MDIO_BITBANG 140 tristate "Support for bitbanged MDIO buses" 141 help 142 This module implements the MDIO bus protocol in software, 143 for use by low level drivers that export the ability to 144 drive the relevant pins. 145 146 If in doubt, say N. 147 148config MDIO_GPIO 149 tristate "Support for GPIO lib-based bitbanged MDIO buses" 150 depends on MDIO_BITBANG && GPIOLIB 151 ---help--- 152 Supports GPIO lib-based MDIO busses. 153 154 To compile this driver as a module, choose M here: the module 155 will be called mdio-gpio. 156 157config MDIO_OCTEON 158 tristate "Support for MDIO buses on Octeon and ThunderX SOCs" 159 depends on 64BIT 160 help 161 162 This module provides a driver for the Octeon and ThunderX MDIO 163 busses. It is required by the Octeon and ThunderX ethernet device 164 drivers. 165 166 If in doubt, say Y. 167 168config MDIO_SUN4I 169 tristate "Allwinner sun4i MDIO interface support" 170 depends on ARCH_SUNXI 171 help 172 This driver supports the MDIO interface found in the network 173 interface units of the Allwinner SoC that have an EMAC (A10, 174 A12, A10s, etc.) 175 176config MDIO_MOXART 177 tristate "MOXA ART MDIO interface support" 178 depends on ARCH_MOXART 179 help 180 This driver supports the MDIO interface found in the network 181 interface units of the MOXA ART SoC 182 183config MDIO_BUS_MUX 184 tristate 185 depends on OF_MDIO 186 help 187 This module provides a driver framework for MDIO bus 188 multiplexers which connect one of several child MDIO busses 189 to a parent bus. Switching between child busses is done by 190 device specific drivers. 191 192config MDIO_BUS_MUX_GPIO 193 tristate "Support for GPIO controlled MDIO bus multiplexers" 194 depends on OF_GPIO && OF_MDIO 195 select MDIO_BUS_MUX 196 help 197 This module provides a driver for MDIO bus multiplexers that 198 are controlled via GPIO lines. The multiplexer connects one of 199 several child MDIO busses to a parent bus. Child bus 200 selection is under the control of GPIO lines. 201 202config MDIO_BUS_MUX_MMIOREG 203 tristate "Support for MMIO device-controlled MDIO bus multiplexers" 204 depends on OF_MDIO && HAS_IOMEM 205 select MDIO_BUS_MUX 206 help 207 This module provides a driver for MDIO bus multiplexers that 208 are controlled via a simple memory-mapped device, like an FPGA. 209 The multiplexer connects one of several child MDIO busses to a 210 parent bus. Child bus selection is under the control of one of 211 the FPGA's registers. 212 213 Currently, only 8-bit registers are supported. 214 215config MDIO_BCM_UNIMAC 216 tristate "Broadcom UniMAC MDIO bus controller" 217 depends on HAS_IOMEM 218 help 219 This module provides a driver for the Broadcom UniMAC MDIO busses. 220 This hardware can be found in the Broadcom GENET Ethernet MAC 221 controllers as well as some Broadcom Ethernet switches such as the 222 Starfighter 2 switches. 223endif # PHYLIB 224 225config MICREL_KS8995MA 226 tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch" 227 depends on SPI 228