1# 2# PHY Layer Configuration 3# 4 5menuconfig PHYLIB 6 tristate "PHY Device support and infrastructure" 7 depends on NETDEVICES 8 help 9 Ethernet controllers are usually attached to PHY 10 devices. This option provides infrastructure for 11 managing PHY devices. 12 13if PHYLIB 14 15comment "MII PHY device drivers" 16 17config AT803X_PHY 18 tristate "Drivers for Atheros AT803X PHYs" 19 ---help--- 20 Currently supports the AT8030 and AT8035 model 21 22config AMD_PHY 23 tristate "Drivers for the AMD PHYs" 24 ---help--- 25 Currently supports the am79c874 26 27config MARVELL_PHY 28 tristate "Drivers for Marvell PHYs" 29 ---help--- 30 Currently has a driver for the 88E1011S 31 32config DAVICOM_PHY 33 tristate "Drivers for Davicom PHYs" 34 ---help--- 35 Currently supports dm9161e and dm9131 36 37config QSEMI_PHY 38 tristate "Drivers for Quality Semiconductor PHYs" 39 ---help--- 40 Currently supports the qs6612 41 42config LXT_PHY 43 tristate "Drivers for the Intel LXT PHYs" 44 ---help--- 45 Currently supports the lxt970, lxt971 46 47config CICADA_PHY 48 tristate "Drivers for the Cicada PHYs" 49 ---help--- 50 Currently supports the cis8204 51 52config VITESSE_PHY 53 tristate "Drivers for the Vitesse PHYs" 54 ---help--- 55 Currently supports the vsc8244 56 57config SMSC_PHY 58 tristate "Drivers for SMSC PHYs" 59 ---help--- 60 Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs 61 62config BROADCOM_PHY 63 tristate "Drivers for Broadcom PHYs" 64 ---help--- 65 Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481 66 and BCM5482 PHYs. 67 68config BCM63XX_PHY 69 tristate "Drivers for Broadcom 63xx SOCs internal PHY" 70 depends on BCM63XX 71 ---help--- 72 Currently supports the 6348 and 6358 PHYs. 73 74config BCM87XX_PHY 75 tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs" 76 help 77 Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs. 78 79config ICPLUS_PHY 80 tristate "Drivers for ICPlus PHYs" 81 ---help--- 82 Currently supports the IP175C and IP1001 PHYs. 83 84config REALTEK_PHY 85 tristate "Drivers for Realtek PHYs" 86 ---help--- 87 Supports the Realtek 821x PHY. 88 89config NATIONAL_PHY 90 tristate "Drivers for National Semiconductor PHYs" 91 ---help--- 92 Currently supports the DP83865 PHY. 93 94config STE10XP 95 tristate "Driver for STMicroelectronics STe10Xp PHYs" 96 ---help--- 97 This is the driver for the STe100p and STe101p PHYs. 98 99config LSI_ET1011C_PHY 100 tristate "Driver for LSI ET1011C PHY" 101 ---help--- 102 Supports the LSI ET1011C PHY. 103 104config MICREL_PHY 105 tristate "Driver for Micrel PHYs" 106 ---help--- 107 Supports the KSZ9021, VSC8201, KS8001 PHYs. 108 109config FIXED_PHY 110 bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" 111 depends on PHYLIB=y 112 ---help--- 113 Adds the platform "fixed" MDIO Bus to cover the boards that use 114 PHYs that are not connected to the real MDIO bus. 115 116 Currently tested with mpc866ads and mpc8349e-mitx. 117 118config MDIO_BITBANG 119 tristate "Support for bitbanged MDIO buses" 120 help 121 This module implements the MDIO bus protocol in software, 122 for use by low level drivers that export the ability to 123 drive the relevant pins. 124 125 If in doubt, say N. 126 127config MDIO_GPIO 128 tristate "Support for GPIO lib-based bitbanged MDIO buses" 129 depends on MDIO_BITBANG && GPIOLIB 130 ---help--- 131 Supports GPIO lib-based MDIO busses. 132 133 To compile this driver as a module, choose M here: the module 134 will be called mdio-gpio. 135 136config MDIO_OCTEON 137 tristate "Support for MDIO buses on Octeon SOCs" 138 depends on CAVIUM_OCTEON_SOC 139 default y 140 help 141 142 This module provides a driver for the Octeon MDIO busses. 143 It is required by the Octeon Ethernet device drivers. 144 145 If in doubt, say Y. 146 147config MDIO_SUN4I 148 tristate "Allwinner sun4i MDIO interface support" 149 depends on ARCH_SUNXI 150 select REGULATOR 151 select REGULATOR_FIXED_VOLTAGE 152 help 153 This driver supports the MDIO interface found in the network 154 interface units of the Allwinner SoC that have an EMAC (A10, 155 A12, A10s, etc.) 156 157config MDIO_MOXART 158 tristate "MOXA ART MDIO interface support" 159 depends on ARCH_MOXART 160 help 161 This driver supports the MDIO interface found in the network 162 interface units of the MOXA ART SoC 163 164config MDIO_BUS_MUX 165 tristate 166 depends on OF_MDIO 167 help 168 This module provides a driver framework for MDIO bus 169 multiplexers which connect one of several child MDIO busses 170 to a parent bus. Switching between child busses is done by 171 device specific drivers. 172 173config MDIO_BUS_MUX_GPIO 174 tristate "Support for GPIO controlled MDIO bus multiplexers" 175 depends on OF_GPIO && OF_MDIO 176 select MDIO_BUS_MUX 177 help 178 This module provides a driver for MDIO bus multiplexers that 179 are controlled via GPIO lines. The multiplexer connects one of 180 several child MDIO busses to a parent bus. Child bus 181 selection is under the control of GPIO lines. 182 183config MDIO_BUS_MUX_MMIOREG 184 tristate "Support for MMIO device-controlled MDIO bus multiplexers" 185 depends on OF_MDIO 186 select MDIO_BUS_MUX 187 help 188 This module provides a driver for MDIO bus multiplexers that 189 are controlled via a simple memory-mapped device, like an FPGA. 190 The multiplexer connects one of several child MDIO busses to a 191 parent bus. Child bus selection is under the control of one of 192 the FPGA's registers. 193 194 Currently, only 8-bit registers are supported. 195 196endif # PHYLIB 197 198config MICREL_KS8995MA 199 tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch" 200 depends on SPI 201