1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright 2016 Broadcom 4 */ 5 #include <linux/clk.h> 6 #include <linux/delay.h> 7 #include <linux/device.h> 8 #include <linux/iopoll.h> 9 #include <linux/mdio-mux.h> 10 #include <linux/module.h> 11 #include <linux/of_mdio.h> 12 #include <linux/phy.h> 13 #include <linux/platform_device.h> 14 15 #define MDIO_RATE_ADJ_EXT_OFFSET 0x000 16 #define MDIO_RATE_ADJ_INT_OFFSET 0x004 17 #define MDIO_RATE_ADJ_DIVIDENT_SHIFT 16 18 19 #define MDIO_SCAN_CTRL_OFFSET 0x008 20 #define MDIO_SCAN_CTRL_OVRIDE_EXT_MSTR 28 21 22 #define MDIO_PARAM_OFFSET 0x23c 23 #define MDIO_PARAM_MIIM_CYCLE 29 24 #define MDIO_PARAM_INTERNAL_SEL 25 25 #define MDIO_PARAM_BUS_ID 22 26 #define MDIO_PARAM_C45_SEL 21 27 #define MDIO_PARAM_PHY_ID 16 28 #define MDIO_PARAM_PHY_DATA 0 29 30 #define MDIO_READ_OFFSET 0x240 31 #define MDIO_READ_DATA_MASK 0xffff 32 #define MDIO_ADDR_OFFSET 0x244 33 34 #define MDIO_CTRL_OFFSET 0x248 35 #define MDIO_CTRL_WRITE_OP 0x1 36 #define MDIO_CTRL_READ_OP 0x2 37 38 #define MDIO_STAT_OFFSET 0x24c 39 #define MDIO_STAT_DONE 1 40 41 #define BUS_MAX_ADDR 32 42 #define EXT_BUS_START_ADDR 16 43 44 #define MDIO_REG_ADDR_SPACE_SIZE 0x250 45 46 #define MDIO_OPERATING_FREQUENCY 11000000 47 #define MDIO_RATE_ADJ_DIVIDENT 1 48 49 struct iproc_mdiomux_desc { 50 void *mux_handle; 51 void __iomem *base; 52 struct device *dev; 53 struct mii_bus *mii_bus; 54 struct clk *core_clk; 55 }; 56 57 static void mdio_mux_iproc_config(struct iproc_mdiomux_desc *md) 58 { 59 u32 divisor; 60 u32 val; 61 62 /* Disable external mdio master access */ 63 val = readl(md->base + MDIO_SCAN_CTRL_OFFSET); 64 val |= BIT(MDIO_SCAN_CTRL_OVRIDE_EXT_MSTR); 65 writel(val, md->base + MDIO_SCAN_CTRL_OFFSET); 66 67 if (md->core_clk) { 68 /* use rate adjust regs to derive the mdio's operating 69 * frequency from the specified core clock 70 */ 71 divisor = clk_get_rate(md->core_clk) / MDIO_OPERATING_FREQUENCY; 72 divisor = divisor / (MDIO_RATE_ADJ_DIVIDENT + 1); 73 val = divisor; 74 val |= MDIO_RATE_ADJ_DIVIDENT << MDIO_RATE_ADJ_DIVIDENT_SHIFT; 75 writel(val, md->base + MDIO_RATE_ADJ_EXT_OFFSET); 76 writel(val, md->base + MDIO_RATE_ADJ_INT_OFFSET); 77 } 78 } 79 80 static int iproc_mdio_wait_for_idle(void __iomem *base, bool result) 81 { 82 u32 val; 83 84 return readl_poll_timeout(base + MDIO_STAT_OFFSET, val, 85 (val & MDIO_STAT_DONE) == result, 86 2000, 1000000); 87 } 88 89 /* start_miim_ops- Program and start MDIO transaction over mdio bus. 90 * @base: Base address 91 * @phyid: phyid of the selected bus. 92 * @reg: register offset to be read/written. 93 * @val :0 if read op else value to be written in @reg; 94 * @op: Operation that need to be carried out. 95 * MDIO_CTRL_READ_OP: Read transaction. 96 * MDIO_CTRL_WRITE_OP: Write transaction. 97 * 98 * Return value: Successful Read operation returns read reg values and write 99 * operation returns 0. Failure operation returns negative error code. 100 */ 101 static int start_miim_ops(void __iomem *base, bool c45, 102 u16 phyid, u32 reg, u16 val, u32 op) 103 { 104 u32 param; 105 int ret; 106 107 writel(0, base + MDIO_CTRL_OFFSET); 108 ret = iproc_mdio_wait_for_idle(base, 0); 109 if (ret) 110 goto err; 111 112 param = readl(base + MDIO_PARAM_OFFSET); 113 param |= phyid << MDIO_PARAM_PHY_ID; 114 param |= val << MDIO_PARAM_PHY_DATA; 115 if (c45) 116 param |= BIT(MDIO_PARAM_C45_SEL); 117 118 writel(param, base + MDIO_PARAM_OFFSET); 119 120 writel(reg, base + MDIO_ADDR_OFFSET); 121 122 writel(op, base + MDIO_CTRL_OFFSET); 123 124 ret = iproc_mdio_wait_for_idle(base, 1); 125 if (ret) 126 goto err; 127 128 if (op == MDIO_CTRL_READ_OP) 129 ret = readl(base + MDIO_READ_OFFSET) & MDIO_READ_DATA_MASK; 130 err: 131 return ret; 132 } 133 134 static int iproc_mdiomux_read_c22(struct mii_bus *bus, int phyid, int reg) 135 { 136 struct iproc_mdiomux_desc *md = bus->priv; 137 int ret; 138 139 ret = start_miim_ops(md->base, false, phyid, reg, 0, MDIO_CTRL_READ_OP); 140 if (ret < 0) 141 dev_err(&bus->dev, "mdiomux c22 read operation failed!!!"); 142 143 return ret; 144 } 145 146 static int iproc_mdiomux_read_c45(struct mii_bus *bus, int phyid, int devad, 147 int reg) 148 { 149 struct iproc_mdiomux_desc *md = bus->priv; 150 int ret; 151 152 ret = start_miim_ops(md->base, true, phyid, reg | devad << 16, 0, 153 MDIO_CTRL_READ_OP); 154 if (ret < 0) 155 dev_err(&bus->dev, "mdiomux read c45 operation failed!!!"); 156 157 return ret; 158 } 159 160 static int iproc_mdiomux_write_c22(struct mii_bus *bus, 161 int phyid, int reg, u16 val) 162 { 163 struct iproc_mdiomux_desc *md = bus->priv; 164 int ret; 165 166 /* Write val at reg offset */ 167 ret = start_miim_ops(md->base, false, phyid, reg, val, 168 MDIO_CTRL_WRITE_OP); 169 if (ret < 0) 170 dev_err(&bus->dev, "mdiomux write c22 operation failed!!!"); 171 172 return ret; 173 } 174 175 static int iproc_mdiomux_write_c45(struct mii_bus *bus, 176 int phyid, int devad, int reg, u16 val) 177 { 178 struct iproc_mdiomux_desc *md = bus->priv; 179 int ret; 180 181 /* Write val at reg offset */ 182 ret = start_miim_ops(md->base, true, phyid, reg | devad << 16, val, 183 MDIO_CTRL_WRITE_OP); 184 if (ret < 0) 185 dev_err(&bus->dev, "mdiomux write c45 operation failed!!!"); 186 187 return ret; 188 } 189 190 static int mdio_mux_iproc_switch_fn(int current_child, int desired_child, 191 void *data) 192 { 193 struct iproc_mdiomux_desc *md = data; 194 u32 param, bus_id; 195 bool bus_dir; 196 197 /* select bus and its properties */ 198 bus_dir = (desired_child < EXT_BUS_START_ADDR); 199 bus_id = bus_dir ? desired_child : (desired_child - EXT_BUS_START_ADDR); 200 201 param = (bus_dir ? 1 : 0) << MDIO_PARAM_INTERNAL_SEL; 202 param |= (bus_id << MDIO_PARAM_BUS_ID); 203 204 writel(param, md->base + MDIO_PARAM_OFFSET); 205 return 0; 206 } 207 208 static int mdio_mux_iproc_probe(struct platform_device *pdev) 209 { 210 struct iproc_mdiomux_desc *md; 211 struct mii_bus *bus; 212 struct resource *res; 213 int rc; 214 215 md = devm_kzalloc(&pdev->dev, sizeof(*md), GFP_KERNEL); 216 if (!md) 217 return -ENOMEM; 218 md->dev = &pdev->dev; 219 220 md->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); 221 if (IS_ERR(md->base)) 222 return PTR_ERR(md->base); 223 if (res->start & 0xfff) { 224 /* For backward compatibility in case the 225 * base address is specified with an offset. 226 */ 227 dev_info(&pdev->dev, "fix base address in dt-blob\n"); 228 res->start &= ~0xfff; 229 res->end = res->start + MDIO_REG_ADDR_SPACE_SIZE - 1; 230 } 231 232 md->mii_bus = devm_mdiobus_alloc(&pdev->dev); 233 if (!md->mii_bus) { 234 dev_err(&pdev->dev, "mdiomux bus alloc failed\n"); 235 return -ENOMEM; 236 } 237 238 md->core_clk = devm_clk_get(&pdev->dev, NULL); 239 if (md->core_clk == ERR_PTR(-ENOENT) || 240 md->core_clk == ERR_PTR(-EINVAL)) 241 md->core_clk = NULL; 242 else if (IS_ERR(md->core_clk)) 243 return PTR_ERR(md->core_clk); 244 245 rc = clk_prepare_enable(md->core_clk); 246 if (rc) { 247 dev_err(&pdev->dev, "failed to enable core clk\n"); 248 return rc; 249 } 250 251 bus = md->mii_bus; 252 bus->priv = md; 253 bus->name = "iProc MDIO mux bus"; 254 snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", pdev->name, pdev->id); 255 bus->parent = &pdev->dev; 256 bus->read = iproc_mdiomux_read_c22; 257 bus->write = iproc_mdiomux_write_c22; 258 bus->read_c45 = iproc_mdiomux_read_c45; 259 bus->write_c45 = iproc_mdiomux_write_c45; 260 261 bus->phy_mask = ~0; 262 bus->dev.of_node = pdev->dev.of_node; 263 rc = mdiobus_register(bus); 264 if (rc) { 265 dev_err(&pdev->dev, "mdiomux registration failed\n"); 266 goto out_clk; 267 } 268 269 platform_set_drvdata(pdev, md); 270 271 rc = mdio_mux_init(md->dev, md->dev->of_node, mdio_mux_iproc_switch_fn, 272 &md->mux_handle, md, md->mii_bus); 273 if (rc) { 274 dev_info(md->dev, "mdiomux initialization failed\n"); 275 goto out_register; 276 } 277 278 mdio_mux_iproc_config(md); 279 280 dev_info(md->dev, "iProc mdiomux registered\n"); 281 return 0; 282 283 out_register: 284 mdiobus_unregister(bus); 285 out_clk: 286 clk_disable_unprepare(md->core_clk); 287 return rc; 288 } 289 290 static int mdio_mux_iproc_remove(struct platform_device *pdev) 291 { 292 struct iproc_mdiomux_desc *md = platform_get_drvdata(pdev); 293 294 mdio_mux_uninit(md->mux_handle); 295 mdiobus_unregister(md->mii_bus); 296 clk_disable_unprepare(md->core_clk); 297 298 return 0; 299 } 300 301 #ifdef CONFIG_PM_SLEEP 302 static int mdio_mux_iproc_suspend(struct device *dev) 303 { 304 struct iproc_mdiomux_desc *md = dev_get_drvdata(dev); 305 306 clk_disable_unprepare(md->core_clk); 307 308 return 0; 309 } 310 311 static int mdio_mux_iproc_resume(struct device *dev) 312 { 313 struct iproc_mdiomux_desc *md = dev_get_drvdata(dev); 314 int rc; 315 316 rc = clk_prepare_enable(md->core_clk); 317 if (rc) { 318 dev_err(md->dev, "failed to enable core clk\n"); 319 return rc; 320 } 321 mdio_mux_iproc_config(md); 322 323 return 0; 324 } 325 #endif 326 327 static SIMPLE_DEV_PM_OPS(mdio_mux_iproc_pm_ops, 328 mdio_mux_iproc_suspend, mdio_mux_iproc_resume); 329 330 static const struct of_device_id mdio_mux_iproc_match[] = { 331 { 332 .compatible = "brcm,mdio-mux-iproc", 333 }, 334 {}, 335 }; 336 MODULE_DEVICE_TABLE(of, mdio_mux_iproc_match); 337 338 static struct platform_driver mdiomux_iproc_driver = { 339 .driver = { 340 .name = "mdio-mux-iproc", 341 .of_match_table = mdio_mux_iproc_match, 342 .pm = &mdio_mux_iproc_pm_ops, 343 }, 344 .probe = mdio_mux_iproc_probe, 345 .remove = mdio_mux_iproc_remove, 346 }; 347 348 module_platform_driver(mdiomux_iproc_driver); 349 350 MODULE_DESCRIPTION("iProc MDIO Mux Bus Driver"); 351 MODULE_AUTHOR("Pramod Kumar <pramod.kumar@broadcom.com>"); 352 MODULE_LICENSE("GPL v2"); 353