1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Broadcom UniMAC MDIO bus controller driver 4 * 5 * Copyright (C) 2014-2017 Broadcom 6 */ 7 8 #include <linux/clk.h> 9 #include <linux/delay.h> 10 #include <linux/io.h> 11 #include <linux/kernel.h> 12 #include <linux/module.h> 13 #include <linux/of.h> 14 #include <linux/of_mdio.h> 15 #include <linux/of_platform.h> 16 #include <linux/phy.h> 17 #include <linux/platform_data/mdio-bcm-unimac.h> 18 #include <linux/platform_device.h> 19 #include <linux/sched.h> 20 21 #define MDIO_CMD 0x00 22 #define MDIO_START_BUSY (1 << 29) 23 #define MDIO_READ_FAIL (1 << 28) 24 #define MDIO_RD (2 << 26) 25 #define MDIO_WR (1 << 26) 26 #define MDIO_PMD_SHIFT 21 27 #define MDIO_PMD_MASK 0x1F 28 #define MDIO_REG_SHIFT 16 29 #define MDIO_REG_MASK 0x1F 30 31 #define MDIO_CFG 0x04 32 #define MDIO_C22 (1 << 0) 33 #define MDIO_C45 0 34 #define MDIO_CLK_DIV_SHIFT 4 35 #define MDIO_CLK_DIV_MASK 0x3F 36 #define MDIO_SUPP_PREAMBLE (1 << 12) 37 38 struct unimac_mdio_priv { 39 struct mii_bus *mii_bus; 40 void __iomem *base; 41 int (*wait_func) (void *wait_func_data); 42 void *wait_func_data; 43 struct clk *clk; 44 u32 clk_freq; 45 }; 46 47 static inline u32 unimac_mdio_readl(struct unimac_mdio_priv *priv, u32 offset) 48 { 49 /* MIPS chips strapped for BE will automagically configure the 50 * peripheral registers for CPU-native byte order. 51 */ 52 if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) 53 return __raw_readl(priv->base + offset); 54 else 55 return readl_relaxed(priv->base + offset); 56 } 57 58 static inline void unimac_mdio_writel(struct unimac_mdio_priv *priv, u32 val, 59 u32 offset) 60 { 61 if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) 62 __raw_writel(val, priv->base + offset); 63 else 64 writel_relaxed(val, priv->base + offset); 65 } 66 67 static inline void unimac_mdio_start(struct unimac_mdio_priv *priv) 68 { 69 u32 reg; 70 71 reg = unimac_mdio_readl(priv, MDIO_CMD); 72 reg |= MDIO_START_BUSY; 73 unimac_mdio_writel(priv, reg, MDIO_CMD); 74 } 75 76 static inline unsigned int unimac_mdio_busy(struct unimac_mdio_priv *priv) 77 { 78 return unimac_mdio_readl(priv, MDIO_CMD) & MDIO_START_BUSY; 79 } 80 81 static int unimac_mdio_poll(void *wait_func_data) 82 { 83 struct unimac_mdio_priv *priv = wait_func_data; 84 unsigned int timeout = 1000; 85 86 do { 87 if (!unimac_mdio_busy(priv)) 88 return 0; 89 90 usleep_range(1000, 2000); 91 } while (--timeout); 92 93 return -ETIMEDOUT; 94 } 95 96 static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg) 97 { 98 struct unimac_mdio_priv *priv = bus->priv; 99 int ret; 100 u32 cmd; 101 102 /* Prepare the read operation */ 103 cmd = MDIO_RD | (phy_id << MDIO_PMD_SHIFT) | (reg << MDIO_REG_SHIFT); 104 unimac_mdio_writel(priv, cmd, MDIO_CMD); 105 106 /* Start MDIO transaction */ 107 unimac_mdio_start(priv); 108 109 ret = priv->wait_func(priv->wait_func_data); 110 if (ret) 111 return ret; 112 113 cmd = unimac_mdio_readl(priv, MDIO_CMD); 114 115 /* Some broken devices are known not to release the line during 116 * turn-around, e.g: Broadcom BCM53125 external switches, so check for 117 * that condition here and ignore the MDIO controller read failure 118 * indication. 119 */ 120 if (!(bus->phy_ignore_ta_mask & 1 << phy_id) && (cmd & MDIO_READ_FAIL)) 121 return -EIO; 122 123 return cmd & 0xffff; 124 } 125 126 static int unimac_mdio_write(struct mii_bus *bus, int phy_id, 127 int reg, u16 val) 128 { 129 struct unimac_mdio_priv *priv = bus->priv; 130 u32 cmd; 131 132 /* Prepare the write operation */ 133 cmd = MDIO_WR | (phy_id << MDIO_PMD_SHIFT) | 134 (reg << MDIO_REG_SHIFT) | (0xffff & val); 135 unimac_mdio_writel(priv, cmd, MDIO_CMD); 136 137 unimac_mdio_start(priv); 138 139 return priv->wait_func(priv->wait_func_data); 140 } 141 142 /* Workaround for integrated BCM7xxx Gigabit PHYs which have a problem with 143 * their internal MDIO management controller making them fail to successfully 144 * be read from or written to for the first transaction. We insert a dummy 145 * BMSR read here to make sure that phy_get_device() and get_phy_id() can 146 * correctly read the PHY MII_PHYSID1/2 registers and successfully register a 147 * PHY device for this peripheral. 148 * 149 * Once the PHY driver is registered, we can workaround subsequent reads from 150 * there (e.g: during system-wide power management). 151 * 152 * bus->reset is invoked before mdiobus_scan during mdiobus_register and is 153 * therefore the right location to stick that workaround. Since we do not want 154 * to read from non-existing PHYs, we either use bus->phy_mask or do a manual 155 * Device Tree scan to limit the search area. 156 */ 157 static int unimac_mdio_reset(struct mii_bus *bus) 158 { 159 struct device_node *np = bus->dev.of_node; 160 struct device_node *child; 161 u32 read_mask = 0; 162 int addr; 163 164 if (!np) { 165 read_mask = ~bus->phy_mask; 166 } else { 167 for_each_available_child_of_node(np, child) { 168 addr = of_mdio_parse_addr(&bus->dev, child); 169 if (addr < 0) 170 continue; 171 172 read_mask |= 1 << addr; 173 } 174 } 175 176 for (addr = 0; addr < PHY_MAX_ADDR; addr++) { 177 if (read_mask & 1 << addr) { 178 dev_dbg(&bus->dev, "Workaround for PHY @ %d\n", addr); 179 mdiobus_read(bus, addr, MII_BMSR); 180 } 181 } 182 183 return 0; 184 } 185 186 static void unimac_mdio_clk_set(struct unimac_mdio_priv *priv) 187 { 188 unsigned long rate; 189 u32 reg, div; 190 191 /* Keep the hardware default values */ 192 if (!priv->clk_freq) 193 return; 194 195 if (!priv->clk) 196 rate = 250000000; 197 else 198 rate = clk_get_rate(priv->clk); 199 200 div = (rate / (2 * priv->clk_freq)) - 1; 201 if (div & ~MDIO_CLK_DIV_MASK) { 202 pr_warn("Incorrect MDIO clock frequency, ignoring\n"); 203 return; 204 } 205 206 /* The MDIO clock is the reference clock (typically 250Mhz) divided by 207 * 2 x (MDIO_CLK_DIV + 1) 208 */ 209 reg = unimac_mdio_readl(priv, MDIO_CFG); 210 reg &= ~(MDIO_CLK_DIV_MASK << MDIO_CLK_DIV_SHIFT); 211 reg |= div << MDIO_CLK_DIV_SHIFT; 212 unimac_mdio_writel(priv, reg, MDIO_CFG); 213 } 214 215 static int unimac_mdio_probe(struct platform_device *pdev) 216 { 217 struct unimac_mdio_pdata *pdata = pdev->dev.platform_data; 218 struct unimac_mdio_priv *priv; 219 struct device_node *np; 220 struct mii_bus *bus; 221 struct resource *r; 222 int ret; 223 224 np = pdev->dev.of_node; 225 226 priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); 227 if (!priv) 228 return -ENOMEM; 229 230 r = platform_get_resource(pdev, IORESOURCE_MEM, 0); 231 if (!r) 232 return -EINVAL; 233 234 /* Just ioremap, as this MDIO block is usually integrated into an 235 * Ethernet MAC controller register range 236 */ 237 priv->base = devm_ioremap(&pdev->dev, r->start, resource_size(r)); 238 if (!priv->base) { 239 dev_err(&pdev->dev, "failed to remap register\n"); 240 return -ENOMEM; 241 } 242 243 priv->clk = devm_clk_get_optional(&pdev->dev, NULL); 244 if (IS_ERR(priv->clk)) 245 return PTR_ERR(priv->clk); 246 247 ret = clk_prepare_enable(priv->clk); 248 if (ret) 249 return ret; 250 251 if (of_property_read_u32(np, "clock-frequency", &priv->clk_freq)) 252 priv->clk_freq = 0; 253 254 unimac_mdio_clk_set(priv); 255 256 priv->mii_bus = mdiobus_alloc(); 257 if (!priv->mii_bus) { 258 ret = -ENOMEM; 259 goto out_clk_disable; 260 } 261 262 bus = priv->mii_bus; 263 bus->priv = priv; 264 if (pdata) { 265 bus->name = pdata->bus_name; 266 priv->wait_func = pdata->wait_func; 267 priv->wait_func_data = pdata->wait_func_data; 268 bus->phy_mask = ~pdata->phy_mask; 269 } else { 270 bus->name = "unimac MII bus"; 271 priv->wait_func_data = priv; 272 priv->wait_func = unimac_mdio_poll; 273 } 274 bus->parent = &pdev->dev; 275 bus->read = unimac_mdio_read; 276 bus->write = unimac_mdio_write; 277 bus->reset = unimac_mdio_reset; 278 snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", pdev->name, pdev->id); 279 280 ret = of_mdiobus_register(bus, np); 281 if (ret) { 282 dev_err(&pdev->dev, "MDIO bus registration failed\n"); 283 goto out_mdio_free; 284 } 285 286 platform_set_drvdata(pdev, priv); 287 288 dev_info(&pdev->dev, "Broadcom UniMAC MDIO bus\n"); 289 290 return 0; 291 292 out_mdio_free: 293 mdiobus_free(bus); 294 out_clk_disable: 295 clk_disable_unprepare(priv->clk); 296 return ret; 297 } 298 299 static int unimac_mdio_remove(struct platform_device *pdev) 300 { 301 struct unimac_mdio_priv *priv = platform_get_drvdata(pdev); 302 303 mdiobus_unregister(priv->mii_bus); 304 mdiobus_free(priv->mii_bus); 305 clk_disable_unprepare(priv->clk); 306 307 return 0; 308 } 309 310 static int __maybe_unused unimac_mdio_suspend(struct device *d) 311 { 312 struct unimac_mdio_priv *priv = dev_get_drvdata(d); 313 314 clk_disable_unprepare(priv->clk); 315 316 return 0; 317 } 318 319 static int __maybe_unused unimac_mdio_resume(struct device *d) 320 { 321 struct unimac_mdio_priv *priv = dev_get_drvdata(d); 322 int ret; 323 324 ret = clk_prepare_enable(priv->clk); 325 if (ret) 326 return ret; 327 328 unimac_mdio_clk_set(priv); 329 330 return 0; 331 } 332 333 static SIMPLE_DEV_PM_OPS(unimac_mdio_pm_ops, 334 unimac_mdio_suspend, unimac_mdio_resume); 335 336 static const struct of_device_id unimac_mdio_ids[] = { 337 { .compatible = "brcm,asp-v2.1-mdio", }, 338 { .compatible = "brcm,asp-v2.0-mdio", }, 339 { .compatible = "brcm,bcm6846-mdio", }, 340 { .compatible = "brcm,genet-mdio-v5", }, 341 { .compatible = "brcm,genet-mdio-v4", }, 342 { .compatible = "brcm,genet-mdio-v3", }, 343 { .compatible = "brcm,genet-mdio-v2", }, 344 { .compatible = "brcm,genet-mdio-v1", }, 345 { .compatible = "brcm,unimac-mdio", }, 346 { /* sentinel */ }, 347 }; 348 MODULE_DEVICE_TABLE(of, unimac_mdio_ids); 349 350 static struct platform_driver unimac_mdio_driver = { 351 .driver = { 352 .name = UNIMAC_MDIO_DRV_NAME, 353 .of_match_table = unimac_mdio_ids, 354 .pm = &unimac_mdio_pm_ops, 355 }, 356 .probe = unimac_mdio_probe, 357 .remove = unimac_mdio_remove, 358 }; 359 module_platform_driver(unimac_mdio_driver); 360 361 MODULE_AUTHOR("Broadcom Corporation"); 362 MODULE_DESCRIPTION("Broadcom UniMAC MDIO bus controller"); 363 MODULE_LICENSE("GPL"); 364 MODULE_ALIAS("platform:" UNIMAC_MDIO_DRV_NAME); 365